From: "Tomas Winkler" <tomasw@gmail.com>
To: Sujith <Sujith.Manoharan@atheros.com>
Cc: linville@tuxdriver.com, linux-wireless@vger.kernel.org,
Jouni.Malinen@atheros.com, Luis.Rodriguez@atheros.com,
johannes@sipsolutions.net
Subject: Re: [PATCH 16/16] mac80211: Add a new event in ieee80211_ampdu_mlme_action
Date: Wed, 29 Oct 2008 11:11:26 +0200 [thread overview]
Message-ID: <1ba2fa240810290211s16f5506cgf7c828b5c3d8aea9@mail.gmail.com> (raw)
In-Reply-To: <18695.60248.383916.563413@gargle.gargle.HOWL>
On Wed, Oct 29, 2008 at 6:49 AM, Sujith <Sujith.Manoharan@atheros.com> wrote:
> Send a notification to the driver on succesful
> reception of an ADDBA response, add IEEE80211_AMPDU_TX_RESUME
> for this purpose.
What what is wrong with IEEE80211_AMPDU_TX_START ? I don' t understand
why this is needed?
Tomas
>
> Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
> ---
> drivers/net/wireless/ath9k/core.h | 1 +
> drivers/net/wireless/ath9k/main.c | 3 +++
> drivers/net/wireless/ath9k/xmit.c | 19 +++++++++++++++++++
> include/net/mac80211.h | 2 ++
> net/mac80211/ht.c | 10 +++++++++-
> 5 files changed, 34 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h
> index 5b17e88..69e8d3e 100644
> --- a/drivers/net/wireless/ath9k/core.h
> +++ b/drivers/net/wireless/ath9k/core.h
> @@ -581,6 +581,7 @@ void ath_tx_aggr_teardown(struct ath_softc *sc,
> int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta,
> u16 tid, u16 *ssn);
> int ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid);
> +void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid);
> void ath_newassoc(struct ath_softc *sc,
> struct ath_node *node, int isnew, int isuapsd);
> void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta);
> diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
> index 376c530..5d07952 100644
> --- a/drivers/net/wireless/ath9k/main.c
> +++ b/drivers/net/wireless/ath9k/main.c
> @@ -1484,6 +1484,9 @@ static int ath9k_ampdu_action(struct ieee80211_hw *hw,
>
> ieee80211_stop_tx_ba_cb_irqsafe(hw, sta->addr, tid);
> break;
> + case IEEE80211_AMPDU_TX_RESUME:
> + ath_tx_aggr_resume(sc, sta, tid);
> + break;
> default:
> DPRINTF(sc, ATH_DBG_FATAL,
> "%s: Unknown AMPDU action\n", __func__);
> diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c
> index 7e6f4e5..fe386b6 100644
> --- a/drivers/net/wireless/ath9k/xmit.c
> +++ b/drivers/net/wireless/ath9k/xmit.c
> @@ -2371,6 +2371,25 @@ int ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid)
> return 0;
> }
>
> +/* Resume tx aggregation */
> +
> +void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid)
> +{
> + struct ath_atx_tid *txtid;
> + struct ath_node *an;
> +
> + an = (struct ath_node *)sta->drv_priv;
> +
> + if (sc->sc_flags & SC_OP_TXAGGR) {
> + txtid = ATH_AN_2_TID(an, tid);
> + txtid->baw_size =
> + IEEE80211_MIN_AMPDU_BUF << sta->ht_cap.ampdu_factor;
> + txtid->state |= AGGR_ADDBA_COMPLETE;
> + txtid->state &= ~AGGR_ADDBA_PROGRESS;
> + ath_tx_resume_tid(sc, txtid);
> + }
> +}
> +
> /*
> * Performs transmit side cleanup when TID changes from aggregated to
> * unaggregated.
> diff --git a/include/net/mac80211.h b/include/net/mac80211.h
> index 0b983be..4051f0a 100644
> --- a/include/net/mac80211.h
> +++ b/include/net/mac80211.h
> @@ -1136,12 +1136,14 @@ enum ieee80211_filter_flags {
> * @IEEE80211_AMPDU_RX_STOP: stop Rx aggregation
> * @IEEE80211_AMPDU_TX_START: start Tx aggregation
> * @IEEE80211_AMPDU_TX_STOP: stop Tx aggregation
> + * @IEEE80211_AMPDU_TX_RESUME: resume TX aggregation
> */
> enum ieee80211_ampdu_mlme_action {
> IEEE80211_AMPDU_RX_START,
> IEEE80211_AMPDU_RX_STOP,
> IEEE80211_AMPDU_TX_START,
> IEEE80211_AMPDU_TX_STOP,
> + IEEE80211_AMPDU_TX_RESUME,
> };
>
> /**
> diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c
> index 1453cb5..0ffbe12 100644
> --- a/net/mac80211/ht.c
> +++ b/net/mac80211/ht.c
> @@ -995,7 +995,7 @@ void ieee80211_process_addba_resp(struct ieee80211_local *local,
> {
> struct ieee80211_hw *hw = &local->hw;
> u16 capab;
> - u16 tid;
> + u16 tid, start_seq_num;
> u8 *state;
>
> capab = le16_to_cpu(mgmt->u.action.u.addba_resp.capab);
> @@ -1032,6 +1032,14 @@ void ieee80211_process_addba_resp(struct ieee80211_local *local,
> local->hw.ampdu_queues)
> ieee80211_wake_queue(hw, sta->tid_to_tx_q[tid]);
>
> + if (local->ops->ampdu_action) {
> + (void)local->ops->ampdu_action(hw,
> + IEEE80211_AMPDU_TX_RESUME,
> + &sta->sta, tid, &start_seq_num);
> + }
> +#ifdef CONFIG_MAC80211_HT_DEBUG
> + printk(KERN_DEBUG "Resuming TX aggregation for tid %d\n", tid);
> +#endif /* CONFIG_MAC80211_HT_DEBUG */
> spin_unlock_bh(&sta->lock);
> } else {
> sta->ampdu_mlme.addba_req_num[tid]++;
> --
> 1.6.0.3
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
next prev parent reply other threads:[~2008-10-29 9:11 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-29 4:49 [PATCH 16/16] mac80211: Add a new event in ieee80211_ampdu_mlme_action Sujith
2008-10-29 9:11 ` Tomas Winkler [this message]
2008-10-29 9:16 ` Sujith
2008-10-29 9:26 ` Tomas Winkler
2008-10-29 9:28 ` Sujith
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1ba2fa240810290211s16f5506cgf7c828b5c3d8aea9@mail.gmail.com \
--to=tomasw@gmail.com \
--cc=Jouni.Malinen@atheros.com \
--cc=Luis.Rodriguez@atheros.com \
--cc=Sujith.Manoharan@atheros.com \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox