[PATCH AUTOSEL 5.1 13/95] mac80211: fix rate reporting inside cfg80211_calculate_bitrate_he()

[PATCH AUTOSEL 5.1 13/95] mac80211: fix rate reporting inside cfg80211_calculate_bitrate_he()

[Sasha Levin]

From: John Crispin <john@phrozen.org>

[ Upstream commit 25d16d124a5e249e947c0487678b61dcff25cf8b ]

The reported rate is not scaled down correctly. After applying this patch,
the function will behave just like the v/ht equivalents.

Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/util.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/wireless/util.c b/net/wireless/util.c
index 75899b62bdc9..5a03f38788e7 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -1237,7 +1237,7 @@ static u32 cfg80211_calculate_bitrate_he(struct rate_info *rate)
 	if (rate->he_dcm)
 		result /= 2;
 
-	return result;
+	return result / 10000;
 }
 
 u32 cfg80211_calculate_bitrate(struct rate_info *rate)
-- 
2.20.1

[PATCH AUTOSEL 5.1 19/95] mac80211: mesh: fix RCU warning

[Sasha Levin]

From: Thomas Pedersen <thomas@eero.com>

[ Upstream commit 551842446ed695641a00782cd118cbb064a416a1 ]

ifmsh->csa is an RCU-protected pointer. The writer context
in ieee80211_mesh_finish_csa() is already mutually
exclusive with wdev->sdata.mtx, but the RCU checker did
not know this. Use rcu_dereference_protected() to avoid a
warning.

fixes the following warning:

[   12.519089] =============================
[   12.520042] WARNING: suspicious RCU usage
[   12.520652] 5.1.0-rc7-wt+ #16 Tainted: G        W
[   12.521409] -----------------------------
[   12.521972] net/mac80211/mesh.c:1223 suspicious rcu_dereference_check() usage!
[   12.522928] other info that might help us debug this:
[   12.523984] rcu_scheduler_active = 2, debug_locks = 1
[   12.524855] 5 locks held by kworker/u8:2/152:
[   12.525438]  #0: 00000000057be08c ((wq_completion)phy0){+.+.}, at: process_one_work+0x1a2/0x620
[   12.526607]  #1: 0000000059c6b07a ((work_completion)(&sdata->csa_finalize_work)){+.+.}, at: process_one_work+0x1a2/0x620
[   12.528001]  #2: 00000000f184ba7d (&wdev->mtx){+.+.}, at: ieee80211_csa_finalize_work+0x2f/0x90
[   12.529116]  #3: 00000000831a1f54 (&local->mtx){+.+.}, at: ieee80211_csa_finalize_work+0x47/0x90
[   12.530233]  #4: 00000000fd06f988 (&local->chanctx_mtx){+.+.}, at: ieee80211_csa_finalize_work+0x51/0x90

Signed-off-by: Thomas Pedersen <thomas@eero.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/mesh.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 766e5e5bab8a..d5aba5029cb0 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -1220,7 +1220,8 @@ int ieee80211_mesh_finish_csa(struct ieee80211_sub_if_data *sdata)
 	ifmsh->chsw_ttl = 0;
 
 	/* Remove the CSA and MCSP elements from the beacon */
-	tmp_csa_settings = rcu_dereference(ifmsh->csa);
+	tmp_csa_settings = rcu_dereference_protected(ifmsh->csa,
+					    lockdep_is_held(&sdata->wdev.mtx));
 	RCU_INIT_POINTER(ifmsh->csa, NULL);
 	if (tmp_csa_settings)
 		kfree_rcu(tmp_csa_settings, rcu_head);
@@ -1242,6 +1243,8 @@ int ieee80211_mesh_csa_beacon(struct ieee80211_sub_if_data *sdata,
 	struct mesh_csa_settings *tmp_csa_settings;
 	int ret = 0;
 
+	lockdep_assert_held(&sdata->wdev.mtx);
+
 	tmp_csa_settings = kmalloc(sizeof(*tmp_csa_settings),
 				   GFP_ATOMIC);
 	if (!tmp_csa_settings)
-- 
2.20.1

[PATCH AUTOSEL 5.1 20/95] mac80211: free peer keys before vif down in mesh

[Sasha Levin]

From: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>

[ Upstream commit 0112fa557c3bb3a002bc85760dc3761d737264d3 ]

freeing peer keys after vif down is resulting in peer key uninstall
to fail due to interface lookup failure. so fix that.

Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/mesh.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index d5aba5029cb0..fe44f0d98de0 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -929,6 +929,7 @@ void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata)
 
 	/* flush STAs and mpaths on this iface */
 	sta_info_flush(sdata);
+	ieee80211_free_keys(sdata, true);
 	mesh_path_flush_by_iface(sdata);
 
 	/* stop the beacon */
-- 
2.20.1

[PATCH AUTOSEL 5.1 22/95] mwifiex: Fix possible buffer overflows at parsing bss descriptor

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 13ec7f10b87f5fc04c4ccbd491c94c7980236a74 ]

mwifiex_update_bss_desc_with_ie() calls memcpy() unconditionally in
a couple places without checking the destination size.  Since the
source is given from user-space, this may trigger a heap buffer
overflow.

Fix it by putting the length check before performing memcpy().

This fix addresses CVE-2019-3846.

Reported-by: huangwen <huangwen@venustech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/scan.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/marvell/mwifiex/scan.c b/drivers/net/wireless/marvell/mwifiex/scan.c
index 935778ec9a1b..64ab6fe78c0d 100644
--- a/drivers/net/wireless/marvell/mwifiex/scan.c
+++ b/drivers/net/wireless/marvell/mwifiex/scan.c
@@ -1247,6 +1247,8 @@ int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter *adapter,
 		}
 		switch (element_id) {
 		case WLAN_EID_SSID:
+			if (element_len > IEEE80211_MAX_SSID_LEN)
+				return -EINVAL;
 			bss_entry->ssid.ssid_len = element_len;
 			memcpy(bss_entry->ssid.ssid, (current_ptr + 2),
 			       element_len);
@@ -1256,6 +1258,8 @@ int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter *adapter,
 			break;
 
 		case WLAN_EID_SUPP_RATES:
+			if (element_len > MWIFIEX_SUPPORTED_RATES)
+				return -EINVAL;
 			memcpy(bss_entry->data_rates, current_ptr + 2,
 			       element_len);
 			memcpy(bss_entry->supported_rates, current_ptr + 2,
-- 
2.20.1

[PATCH AUTOSEL 5.1 23/95] mwifiex: Abort at too short BSS descriptor element

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 685c9b7750bfacd6fc1db50d86579980593b7869 ]

Currently mwifiex_update_bss_desc_with_ie() implicitly assumes that
the source descriptor entries contain the enough size for each type
and performs copying without checking the source size.  This may lead
to read over boundary.

Fix this by putting the source size check in appropriate places.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/scan.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/net/wireless/marvell/mwifiex/scan.c b/drivers/net/wireless/marvell/mwifiex/scan.c
index 64ab6fe78c0d..c269a0de9413 100644
--- a/drivers/net/wireless/marvell/mwifiex/scan.c
+++ b/drivers/net/wireless/marvell/mwifiex/scan.c
@@ -1269,6 +1269,8 @@ int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter *adapter,
 			break;
 
 		case WLAN_EID_FH_PARAMS:
+			if (element_len + 2 < sizeof(*fh_param_set))
+				return -EINVAL;
 			fh_param_set =
 				(struct ieee_types_fh_param_set *) current_ptr;
 			memcpy(&bss_entry->phy_param_set.fh_param_set,
@@ -1277,6 +1279,8 @@ int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter *adapter,
 			break;
 
 		case WLAN_EID_DS_PARAMS:
+			if (element_len + 2 < sizeof(*ds_param_set))
+				return -EINVAL;
 			ds_param_set =
 				(struct ieee_types_ds_param_set *) current_ptr;
 
@@ -1288,6 +1292,8 @@ int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter *adapter,
 			break;
 
 		case WLAN_EID_CF_PARAMS:
+			if (element_len + 2 < sizeof(*cf_param_set))
+				return -EINVAL;
 			cf_param_set =
 				(struct ieee_types_cf_param_set *) current_ptr;
 			memcpy(&bss_entry->ss_param_set.cf_param_set,
@@ -1296,6 +1302,8 @@ int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter *adapter,
 			break;
 
 		case WLAN_EID_IBSS_PARAMS:
+			if (element_len + 2 < sizeof(*ibss_param_set))
+				return -EINVAL;
 			ibss_param_set =
 				(struct ieee_types_ibss_param_set *)
 				current_ptr;
@@ -1305,10 +1313,14 @@ int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter *adapter,
 			break;
 
 		case WLAN_EID_ERP_INFO:
+			if (!element_len)
+				return -EINVAL;
 			bss_entry->erp_flags = *(current_ptr + 2);
 			break;
 
 		case WLAN_EID_PWR_CONSTRAINT:
+			if (!element_len)
+				return -EINVAL;
 			bss_entry->local_constraint = *(current_ptr + 2);
 			bss_entry->sensed_11h = true;
 			break;
@@ -1349,6 +1361,9 @@ int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter *adapter,
 			break;
 
 		case WLAN_EID_VENDOR_SPECIFIC:
+			if (element_len + 2 < sizeof(vendor_ie->vend_hdr))
+				return -EINVAL;
+
 			vendor_ie = (struct ieee_types_vendor_specific *)
 					current_ptr;
 
-- 
2.20.1

[PATCH AUTOSEL 5.1 25/95] iwlwifi: fix load in rfkill flow for unified firmware

[Sasha Levin]

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

[ Upstream commit b3500b472c880b5abe90ffd5c4a25aa736f906ad ]

When we have a single image (same firmware image for INIT and
OPERATIONAL), we couldn't load the driver and register to the
stack if we had hardware RF-Kill asserted.

Fix this. This required a few changes:

1) Run the firmware as part of the INIT phase even if its
   ucode_type is not IWL_UCODE_INIT.
2) Send the commands that are sent to the unified image in
   INIT flow even in RF-Kill.
3) Don't ask the transport to stop the hardware upon RF-Kill
   interrupt if the RF-Kill is asserted.
4) Allow the RF-Kill interrupt to take us out of L1A so that
   the RF-Kill interrupt will be received by the host (to
   enable the radio).

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/fw.c   | 23 ++++++++++++++-----
 .../net/wireless/intel/iwlwifi/mvm/mac80211.c |  2 +-
 drivers/net/wireless/intel/iwlwifi/mvm/mvm.h  |  2 +-
 drivers/net/wireless/intel/iwlwifi/mvm/ops.c  | 17 ++++++++++----
 .../wireless/intel/iwlwifi/pcie/internal.h    |  2 +-
 5 files changed, 33 insertions(+), 13 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c
index ab68b5d53ec9..153717587aeb 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c
@@ -311,6 +311,8 @@ static int iwl_mvm_load_ucode_wait_alive(struct iwl_mvm *mvm,
 	int ret;
 	enum iwl_ucode_type old_type = mvm->fwrt.cur_fw_img;
 	static const u16 alive_cmd[] = { MVM_ALIVE };
+	bool run_in_rfkill =
+		ucode_type == IWL_UCODE_INIT || iwl_mvm_has_unified_ucode(mvm);
 
 	if (ucode_type == IWL_UCODE_REGULAR &&
 	    iwl_fw_dbg_conf_usniffer(mvm->fw, FW_DBG_START_FROM_ALIVE) &&
@@ -328,7 +330,12 @@ static int iwl_mvm_load_ucode_wait_alive(struct iwl_mvm *mvm,
 				   alive_cmd, ARRAY_SIZE(alive_cmd),
 				   iwl_alive_fn, &alive_data);
 
-	ret = iwl_trans_start_fw(mvm->trans, fw, ucode_type == IWL_UCODE_INIT);
+	/*
+	 * We want to load the INIT firmware even in RFKILL
+	 * For the unified firmware case, the ucode_type is not
+	 * INIT, but we still need to run it.
+	 */
+	ret = iwl_trans_start_fw(mvm->trans, fw, run_in_rfkill);
 	if (ret) {
 		iwl_fw_set_current_image(&mvm->fwrt, old_type);
 		iwl_remove_notification(&mvm->notif_wait, &alive_wait);
@@ -433,7 +440,8 @@ static int iwl_run_unified_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm)
 	 * commands
 	 */
 	ret = iwl_mvm_send_cmd_pdu(mvm, WIDE_ID(SYSTEM_GROUP,
-						INIT_EXTENDED_CFG_CMD), 0,
+						INIT_EXTENDED_CFG_CMD),
+				   CMD_SEND_IN_RFKILL,
 				   sizeof(init_cfg), &init_cfg);
 	if (ret) {
 		IWL_ERR(mvm, "Failed to run init config command: %d\n",
@@ -457,7 +465,8 @@ static int iwl_run_unified_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm)
 	}
 
 	ret = iwl_mvm_send_cmd_pdu(mvm, WIDE_ID(REGULATORY_AND_NVM_GROUP,
-						NVM_ACCESS_COMPLETE), 0,
+						NVM_ACCESS_COMPLETE),
+				   CMD_SEND_IN_RFKILL,
 				   sizeof(nvm_complete), &nvm_complete);
 	if (ret) {
 		IWL_ERR(mvm, "Failed to run complete NVM access: %d\n",
@@ -482,6 +491,8 @@ static int iwl_run_unified_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm)
 		}
 	}
 
+	mvm->rfkill_safe_init_done = true;
+
 	return 0;
 
 error:
@@ -526,7 +537,7 @@ int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm)
 
 	lockdep_assert_held(&mvm->mutex);
 
-	if (WARN_ON_ONCE(mvm->calibrating))
+	if (WARN_ON_ONCE(mvm->rfkill_safe_init_done))
 		return 0;
 
 	iwl_init_notification_wait(&mvm->notif_wait,
@@ -576,7 +587,7 @@ int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm)
 		goto remove_notif;
 	}
 
-	mvm->calibrating = true;
+	mvm->rfkill_safe_init_done = true;
 
 	/* Send TX valid antennas before triggering calibrations */
 	ret = iwl_send_tx_ant_cfg(mvm, iwl_mvm_get_valid_tx_ant(mvm));
@@ -612,7 +623,7 @@ int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm)
 remove_notif:
 	iwl_remove_notification(&mvm->notif_wait, &calib_wait);
 out:
-	mvm->calibrating = false;
+	mvm->rfkill_safe_init_done = false;
 	if (iwlmvm_mod_params.init_dbg && !mvm->nvm_data) {
 		/* we want to debug INIT and we have no NVM - fake */
 		mvm->nvm_data = kzalloc(sizeof(struct iwl_nvm_data) +
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
index 6a3b11dd2edf..4ddf620c267d 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
@@ -1211,7 +1211,7 @@ static void iwl_mvm_restart_cleanup(struct iwl_mvm *mvm)
 
 	mvm->scan_status = 0;
 	mvm->ps_disabled = false;
-	mvm->calibrating = false;
+	mvm->rfkill_safe_init_done = false;
 
 	/* just in case one was running */
 	iwl_mvm_cleanup_roc_te(mvm);
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h
index a50dc53df086..b698d55ace1b 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h
@@ -877,7 +877,7 @@ struct iwl_mvm {
 	struct iwl_mvm_vif *bf_allowed_vif;
 
 	bool hw_registered;
-	bool calibrating;
+	bool rfkill_safe_init_done;
 	bool support_umac_log;
 
 	u32 ampdu_ref;
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c
index 13681b03c10e..20115770e75a 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c
@@ -1222,7 +1222,8 @@ void iwl_mvm_set_hw_ctkill_state(struct iwl_mvm *mvm, bool state)
 static bool iwl_mvm_set_hw_rfkill_state(struct iwl_op_mode *op_mode, bool state)
 {
 	struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode);
-	bool calibrating = READ_ONCE(mvm->calibrating);
+	bool rfkill_safe_init_done = READ_ONCE(mvm->rfkill_safe_init_done);
+	bool unified = iwl_mvm_has_unified_ucode(mvm);
 
 	if (state)
 		set_bit(IWL_MVM_STATUS_HW_RFKILL, &mvm->status);
@@ -1231,15 +1232,23 @@ static bool iwl_mvm_set_hw_rfkill_state(struct iwl_op_mode *op_mode, bool state)
 
 	iwl_mvm_set_rfkill_state(mvm);
 
-	/* iwl_run_init_mvm_ucode is waiting for results, abort it */
-	if (calibrating)
+	 /* iwl_run_init_mvm_ucode is waiting for results, abort it. */
+	if (rfkill_safe_init_done)
 		iwl_abort_notification_waits(&mvm->notif_wait);
 
+	/*
+	 * Don't ask the transport to stop the firmware. We'll do it
+	 * after cfg80211 takes us down.
+	 */
+	if (unified)
+		return false;
+
 	/*
 	 * Stop the device if we run OPERATIONAL firmware or if we are in the
 	 * middle of the calibrations.
 	 */
-	return state && (mvm->fwrt.cur_fw_img != IWL_UCODE_INIT || calibrating);
+	return state && (mvm->fwrt.cur_fw_img != IWL_UCODE_INIT ||
+			 rfkill_safe_init_done);
 }
 
 static void iwl_mvm_free_skb(struct iwl_op_mode *op_mode, struct sk_buff *skb)
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/internal.h b/drivers/net/wireless/intel/iwlwifi/pcie/internal.h
index 59213164f35e..2afce5c41322 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/internal.h
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/internal.h
@@ -948,7 +948,7 @@ static inline void iwl_enable_rfkill_int(struct iwl_trans *trans)
 					   MSIX_HW_INT_CAUSES_REG_RF_KILL);
 	}
 
-	if (trans->cfg->device_family == IWL_DEVICE_FAMILY_9000) {
+	if (trans->cfg->device_family >= IWL_DEVICE_FAMILY_9000) {
 		/*
 		 * On 9000-series devices this bit isn't enabled by default, so
 		 * when we power down the device we need set the bit to allow it
-- 
2.20.1

[PATCH AUTOSEL 5.1 26/95] iwlwifi: clear persistence bit according to device family

[Sasha Levin]

From: Shahar S Matityahu <shahar.s.matityahu@intel.com>

[ Upstream commit 44f61b5c832c4085fcf476484efeaeef96dcfb8b ]

The driver attempts to clear persistence bit on any device familiy even
though only 9000 and 22000 families require it. Clear the bit only on
the relevant device families.

Each HW has different address to the write protection register. Use the
right register for each HW

Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Fixes: 8954e1eb2270 ("iwlwifi: trans: Clear persistence bit when starting the FW")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/iwl-prph.h |  7 ++-
 .../net/wireless/intel/iwlwifi/pcie/trans.c   | 46 +++++++++++++------
 2 files changed, 39 insertions(+), 14 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-prph.h b/drivers/net/wireless/intel/iwlwifi/iwl-prph.h
index 1af9f9e1ecd4..0c0799d13e15 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-prph.h
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-prph.h
@@ -402,7 +402,12 @@ enum aux_misc_master1_en {
 #define AUX_MISC_MASTER1_SMPHR_STATUS	0xA20800
 #define RSA_ENABLE			0xA24B08
 #define PREG_AUX_BUS_WPROT_0		0xA04CC0
-#define PREG_PRPH_WPROT_0		0xA04CE0
+
+/* device family 9000 WPROT register */
+#define PREG_PRPH_WPROT_9000		0xA04CE0
+/* device family 22000 WPROT register */
+#define PREG_PRPH_WPROT_22000		0xA04D00
+
 #define SB_CPU_1_STATUS			0xA01E30
 #define SB_CPU_2_STATUS			0xA01E34
 #define UMAG_SB_CPU_1_STATUS		0xA038C0
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
index c4375b868901..2a03d34afa3b 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
@@ -1696,26 +1696,26 @@ static int iwl_pcie_init_msix_handler(struct pci_dev *pdev,
 	return 0;
 }
 
-static int _iwl_trans_pcie_start_hw(struct iwl_trans *trans, bool low_power)
+static int iwl_trans_pcie_clear_persistence_bit(struct iwl_trans *trans)
 {
-	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
-	u32 hpm;
-	int err;
-
-	lockdep_assert_held(&trans_pcie->mutex);
+	u32 hpm, wprot;
 
-	err = iwl_pcie_prepare_card_hw(trans);
-	if (err) {
-		IWL_ERR(trans, "Error while preparing HW: %d\n", err);
-		return err;
+	switch (trans->cfg->device_family) {
+	case IWL_DEVICE_FAMILY_9000:
+		wprot = PREG_PRPH_WPROT_9000;
+		break;
+	case IWL_DEVICE_FAMILY_22000:
+		wprot = PREG_PRPH_WPROT_22000;
+		break;
+	default:
+		return 0;
 	}
 
 	hpm = iwl_read_umac_prph_no_grab(trans, HPM_DEBUG);
 	if (hpm != 0xa5a5a5a0 && (hpm & PERSISTENCE_BIT)) {
-		int wfpm_val = iwl_read_umac_prph_no_grab(trans,
-							  PREG_PRPH_WPROT_0);
+		u32 wprot_val = iwl_read_umac_prph_no_grab(trans, wprot);
 
-		if (wfpm_val & PREG_WFPM_ACCESS) {
+		if (wprot_val & PREG_WFPM_ACCESS) {
 			IWL_ERR(trans,
 				"Error, can not clear persistence bit\n");
 			return -EPERM;
@@ -1724,6 +1724,26 @@ static int _iwl_trans_pcie_start_hw(struct iwl_trans *trans, bool low_power)
 					    hpm & ~PERSISTENCE_BIT);
 	}
 
+	return 0;
+}
+
+static int _iwl_trans_pcie_start_hw(struct iwl_trans *trans, bool low_power)
+{
+	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
+	int err;
+
+	lockdep_assert_held(&trans_pcie->mutex);
+
+	err = iwl_pcie_prepare_card_hw(trans);
+	if (err) {
+		IWL_ERR(trans, "Error while preparing HW: %d\n", err);
+		return err;
+	}
+
+	err = iwl_trans_pcie_clear_persistence_bit(trans);
+	if (err)
+		return err;
+
 	iwl_trans_pcie_sw_reset(trans);
 
 	err = iwl_pcie_apm_init(trans);
-- 
2.20.1

[PATCH AUTOSEL 5.1 27/95] iwlwifi: fix AX201 killer sku loading firmware issue

[Sasha Levin]

From: Matt Chen <matt.chen@intel.com>

[ Upstream commit b17dc0632a17fbfe66b34ee7c24e1cc10cfc503e ]

When try to bring up the AX201 2 killer sku, we
run into:
[81261.392463] iwlwifi 0000:01:00.0: loaded firmware version 46.8c20f243.0 op_mode iwlmvm
[81261.407407] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AX 22000, REV=0x340
[81262.424778] iwlwifi 0000:01:00.0: Collecting data: trigger 16 fired.
[81262.673359] iwlwifi 0000:01:00.0: Start IWL Error Log Dump:
[81262.673365] iwlwifi 0000:01:00.0: Status: 0x00000000, count: -906373681
[81262.673368] iwlwifi 0000:01:00.0: Loaded firmware version: 46.8c20f243.0
[81262.673371] iwlwifi 0000:01:00.0: 0x507C015D | ADVANCED_SYSASSERT

Fix this issue by adding 2 more cfg to avoid modifying the
original cfg configuration.

Signed-off-by: Matt Chen <matt.chen@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/pcie/trans.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
index 2a03d34afa3b..80695584e406 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
@@ -3585,7 +3585,9 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev,
 		}
 	} else if (CSR_HW_RF_ID_TYPE_CHIP_ID(trans->hw_rf_id) ==
 		   CSR_HW_RF_ID_TYPE_CHIP_ID(CSR_HW_RF_ID_TYPE_HR) &&
-		   (trans->cfg != &iwl_ax200_cfg_cc ||
+		   ((trans->cfg != &iwl_ax200_cfg_cc &&
+		    trans->cfg != &killer1650x_2ax_cfg &&
+		    trans->cfg != &killer1650w_2ax_cfg) ||
 		    trans->hw_rev == CSR_HW_REV_TYPE_QNJ_B0)) {
 		u32 hw_status;
 
-- 
2.20.1

[PATCH AUTOSEL 5.1 28/95] iwlwifi: Fix double-free problems in iwl_req_fw_callback()

[Sasha Levin]

From: Jia-Ju Bai <baijiaju1990@gmail.com>

[ Upstream commit a8627176b0de7ba3f4524f641ddff4abf23ae4e4 ]

In the error handling code of iwl_req_fw_callback(), iwl_dealloc_ucode()
is called to free data. In iwl_drv_stop(), iwl_dealloc_ucode() is called
again, which can cause double-free problems.

To fix this bug, the call to iwl_dealloc_ucode() in
iwl_req_fw_callback() is deleted.

This bug is found by a runtime fuzzing tool named FIZZER written by us.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/iwl-drv.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
index 689a65b11cc3..4fd1737d768b 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
@@ -1579,7 +1579,6 @@ static void iwl_req_fw_callback(const struct firmware *ucode_raw, void *context)
 	goto free;
 
  out_free_fw:
-	iwl_dealloc_ucode(drv);
 	release_firmware(ucode_raw);
  out_unbind:
 	complete(&drv->request_firmware_complete);
-- 
2.20.1

[PATCH AUTOSEL 5.1 29/95] mwifiex: Fix heap overflow in mwifiex_uap_parse_tail_ies()

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 69ae4f6aac1578575126319d3f55550e7e440449 ]

A few places in mwifiex_uap_parse_tail_ies() perform memcpy()
unconditionally, which may lead to either buffer overflow or read over
boundary.

This patch addresses the issues by checking the read size and the
destination size at each place more properly.  Along with the fixes,
the patch cleans up the code slightly by introducing a temporary
variable for the token size, and unifies the error path with the
standard goto statement.

Reported-by: huangwen <huangwen@venustech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/ie.c | 47 +++++++++++++++--------
 1 file changed, 31 insertions(+), 16 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/ie.c b/drivers/net/wireless/marvell/mwifiex/ie.c
index 6845eb57b39a..653d347a9a19 100644
--- a/drivers/net/wireless/marvell/mwifiex/ie.c
+++ b/drivers/net/wireless/marvell/mwifiex/ie.c
@@ -329,6 +329,8 @@ static int mwifiex_uap_parse_tail_ies(struct mwifiex_private *priv,
 	struct ieee80211_vendor_ie *vendorhdr;
 	u16 gen_idx = MWIFIEX_AUTO_IDX_MASK, ie_len = 0;
 	int left_len, parsed_len = 0;
+	unsigned int token_len;
+	int err = 0;
 
 	if (!info->tail || !info->tail_len)
 		return 0;
@@ -344,6 +346,12 @@ static int mwifiex_uap_parse_tail_ies(struct mwifiex_private *priv,
 	 */
 	while (left_len > sizeof(struct ieee_types_header)) {
 		hdr = (void *)(info->tail + parsed_len);
+		token_len = hdr->len + sizeof(struct ieee_types_header);
+		if (token_len > left_len) {
+			err = -EINVAL;
+			goto out;
+		}
+
 		switch (hdr->element_id) {
 		case WLAN_EID_SSID:
 		case WLAN_EID_SUPP_RATES:
@@ -361,17 +369,20 @@ static int mwifiex_uap_parse_tail_ies(struct mwifiex_private *priv,
 			if (cfg80211_find_vendor_ie(WLAN_OUI_MICROSOFT,
 						    WLAN_OUI_TYPE_MICROSOFT_WMM,
 						    (const u8 *)hdr,
-						    hdr->len + sizeof(struct ieee_types_header)))
+						    token_len))
 				break;
 			/* fall through */
 		default:
-			memcpy(gen_ie->ie_buffer + ie_len, hdr,
-			       hdr->len + sizeof(struct ieee_types_header));
-			ie_len += hdr->len + sizeof(struct ieee_types_header);
+			if (ie_len + token_len > IEEE_MAX_IE_SIZE) {
+				err = -EINVAL;
+				goto out;
+			}
+			memcpy(gen_ie->ie_buffer + ie_len, hdr, token_len);
+			ie_len += token_len;
 			break;
 		}
-		left_len -= hdr->len + sizeof(struct ieee_types_header);
-		parsed_len += hdr->len + sizeof(struct ieee_types_header);
+		left_len -= token_len;
+		parsed_len += token_len;
 	}
 
 	/* parse only WPA vendor IE from tail, WMM IE is configured by
@@ -381,15 +392,17 @@ static int mwifiex_uap_parse_tail_ies(struct mwifiex_private *priv,
 						    WLAN_OUI_TYPE_MICROSOFT_WPA,
 						    info->tail, info->tail_len);
 	if (vendorhdr) {
-		memcpy(gen_ie->ie_buffer + ie_len, vendorhdr,
-		       vendorhdr->len + sizeof(struct ieee_types_header));
-		ie_len += vendorhdr->len + sizeof(struct ieee_types_header);
+		token_len = vendorhdr->len + sizeof(struct ieee_types_header);
+		if (ie_len + token_len > IEEE_MAX_IE_SIZE) {
+			err = -EINVAL;
+			goto out;
+		}
+		memcpy(gen_ie->ie_buffer + ie_len, vendorhdr, token_len);
+		ie_len += token_len;
 	}
 
-	if (!ie_len) {
-		kfree(gen_ie);
-		return 0;
-	}
+	if (!ie_len)
+		goto out;
 
 	gen_ie->ie_index = cpu_to_le16(gen_idx);
 	gen_ie->mgmt_subtype_mask = cpu_to_le16(MGMT_MASK_BEACON |
@@ -399,13 +412,15 @@ static int mwifiex_uap_parse_tail_ies(struct mwifiex_private *priv,
 
 	if (mwifiex_update_uap_custom_ie(priv, gen_ie, &gen_idx, NULL, NULL,
 					 NULL, NULL)) {
-		kfree(gen_ie);
-		return -1;
+		err = -EINVAL;
+		goto out;
 	}
 
 	priv->gen_idx = gen_idx;
+
+ out:
 	kfree(gen_ie);
-	return 0;
+	return err;
 }
 
 /* This function parses different IEs-head & tail IEs, beacon IEs,
-- 
2.20.1

[PATCH AUTOSEL 5.1 64/95] mac80211: only warn once on chanctx_conf being NULL

[Sasha Levin]

From: Yibo Zhao <yiboz@codeaurora.org>

[ Upstream commit 563572340173865a9a356e6bb02579e6998a876d ]

In multiple SSID cases, it takes time to prepare every AP interface
to be ready in initializing phase. If a sta already knows everything it
needs to join one of the APs and sends authentication to the AP which
is not fully prepared at this point of time, AP's channel context
could be NULL. As a result, warning message occurs.

Even worse, if the AP is under attack via tools such as MDK3 and massive
authentication requests are received in a very short time, console will
be hung due to kernel warning messages.

WARN_ON_ONCE() could be a better way for indicating warning messages
without duplicate messages to flood the console.

Johannes: We still need to address the underlying problem, but we
          don't really have a good handle on it yet. Suppress the
          worst side-effects for now.

Signed-off-by: Zhi Chen <zhichen@codeaurora.org>
Signed-off-by: Yibo Zhao <yiboz@codeaurora.org>
[johannes: add note, change subject]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/ieee80211_i.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index e170f986d226..2878ea8a01fd 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1434,7 +1434,7 @@ ieee80211_get_sband(struct ieee80211_sub_if_data *sdata)
 	rcu_read_lock();
 	chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
 
-	if (WARN_ON(!chanctx_conf)) {
+	if (WARN_ON_ONCE(!chanctx_conf)) {
 		rcu_read_unlock();
 		return NULL;
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.1 65/95] mac80211: do not start any work during reconfigure flow

[Sasha Levin]

From: Naftali Goldstein <naftali.goldstein@intel.com>

[ Upstream commit f8891461a277ec0afc493fd30cd975a38048a038 ]

It is not a good idea to try to perform any work (e.g. send an auth
frame) during reconfigure flow.

Prevent this from happening, and at the end of the reconfigure flow
requeue all the works.

Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/ieee80211_i.h | 7 +++++++
 net/mac80211/util.c        | 4 ++++
 2 files changed, 11 insertions(+)

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 2878ea8a01fd..53fbad3b99b8 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -2034,6 +2034,13 @@ void __ieee80211_flush_queues(struct ieee80211_local *local,
 
 static inline bool ieee80211_can_run_worker(struct ieee80211_local *local)
 {
+	/*
+	 * It's unsafe to try to do any work during reconfigure flow.
+	 * When the flow ends the work will be requeued.
+	 */
+	if (local->in_reconfig)
+		return false;
+
 	/*
 	 * If quiescing is set, we are racing with __ieee80211_suspend.
 	 * __ieee80211_suspend flushes the workers after setting quiescing,
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 4c1655972565..70f5816412bb 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -2442,6 +2442,10 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 		mutex_lock(&local->mtx);
 		ieee80211_start_next_roc(local);
 		mutex_unlock(&local->mtx);
+
+		/* Requeue all works */
+		list_for_each_entry(sdata, &local->interfaces, list)
+			ieee80211_queue_work(&local->hw, &sdata->work);
 	}
 
 	ieee80211_wake_queues_by_reason(hw, IEEE80211_MAX_QUEUE_MAP,
-- 
2.20.1

[PATCH AUTOSEL 5.1 66/95] cfg80211: util: fix bit count off by one

[Sasha Levin]

From: Mordechay Goodstein <mordechay.goodstein@intel.com>

[ Upstream commit 1a473d6092d5d182914bea854ce0b21e6d12519d ]

The bits of Rx MCS Map in VHT capability were enumerated
with index transform - index i -> (i + 1) bit => nss i. BUG!
while it should be -   index i -> (i + 1) bit => (i + 1) nss.

The bug was exposed in commit a53b2a0b1245 ("iwlwifi: mvm: implement VHT
extended NSS support in rs.c"), where iwlwifi started using the
function.

Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Fixes: b0aa75f0b1b2 ("ieee80211: add new VHT capability fields/parsing")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/util.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/wireless/util.c b/net/wireless/util.c
index 5a03f38788e7..5ac66a571e33 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -1989,7 +1989,7 @@ int ieee80211_get_vht_max_nss(struct ieee80211_vht_cap *cap,
 			continue;
 
 		if (supp >= mcs_encoding) {
-			max_vht_nss = i;
+			max_vht_nss = i + 1;
 			break;
 		}
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.1 67/95] cfg80211: report measurement start TSF correctly

[Sasha Levin]

From: Avraham Stern <avraham.stern@intel.com>

[ Upstream commit b65842025335711e2a0259feb4dbadb0c9ffb6d9 ]

Instead of reporting the AP's TSF, host time was reported. Fix it.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/pmsr.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/wireless/pmsr.c b/net/wireless/pmsr.c
index 5e2ab01d325c..d06d514f0bba 100644
--- a/net/wireless/pmsr.c
+++ b/net/wireless/pmsr.c
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 /*
- * Copyright (C) 2018 Intel Corporation
+ * Copyright (C) 2018 - 2019 Intel Corporation
  */
 #ifndef __PMSR_H
 #define __PMSR_H
@@ -446,7 +446,7 @@ static int nl80211_pmsr_send_result(struct sk_buff *msg,
 
 	if (res->ap_tsf_valid &&
 	    nla_put_u64_64bit(msg, NL80211_PMSR_RESP_ATTR_AP_TSF,
-			      res->host_time, NL80211_PMSR_RESP_ATTR_PAD))
+			      res->ap_tsf, NL80211_PMSR_RESP_ATTR_PAD))
 		goto error;
 
 	if (res->final && nla_put_flag(msg, NL80211_PMSR_RESP_ATTR_FINAL))
-- 
2.20.1