[PATCH 13/24] wifi: mt76: mt7996: use emulated hardware scan support

[Felix Fietkau <nbd@nbd.name>]

Preparation for supporting multiple radios on a single wiphy

Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 drivers/net/wireless/mediatek/mt76/mt7996/init.c | 3 +++
 drivers/net/wireless/mediatek/mt76/mt7996/main.c | 4 ++--
 2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/init.c b/drivers/net/wireless/mediatek/mt76/mt7996/init.c
index 5b23ca1554cb..1ebac1905c22 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/init.c
@@ -442,6 +442,9 @@ mt7996_init_wiphy(struct ieee80211_hw *hw, struct mtk_wed_device *wed)
 
 	wiphy->available_antennas_rx = phy->mt76->antenna_mask;
 	wiphy->available_antennas_tx = phy->mt76->antenna_mask;
+
+	wiphy->max_scan_ssids = 4;
+	wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN;
 }
 
 static void
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/main.c b/drivers/net/wireless/mediatek/mt76/mt7996/main.c
index 9f1460eca4f4..d7e33e3b04ac 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/main.c
@@ -1522,8 +1522,8 @@ const struct ieee80211_ops mt7996_ops = {
 	.ampdu_action = mt7996_ampdu_action,
 	.set_rts_threshold = mt7996_set_rts_threshold,
 	.wake_tx_queue = mt76_wake_tx_queue,
-	.sw_scan_start = mt76_sw_scan,
-	.sw_scan_complete = mt76_sw_scan_complete,
+	.hw_scan = mt76_hw_scan,
+	.cancel_hw_scan = mt76_cancel_hw_scan,
 	.release_buffered_frames = mt76_release_buffered_frames,
 	.get_txpower = mt76_get_txpower,
 	.channel_switch_beacon = mt7996_channel_switch_beacon,
-- 
2.47.1