From: Felix Fietkau <nbd@nbd.name>
To: linux-wireless@vger.kernel.org
Subject: [PATCH 04/24] wifi: mt76: add vif link specific data structure
Date: Thu, 2 Jan 2025 17:34:48 +0100 [thread overview]
Message-ID: <20250102163508.52945-4-nbd@nbd.name> (raw)
In-Reply-To: <20250102163508.52945-1-nbd@nbd.name>
Preparation for splitting link data from vif data for MLO support.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
drivers/net/wireless/mediatek/mt76/mt76.h | 53 +++++++++++++++++++++++
1 file changed, 53 insertions(+)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
index 1782ebc7085e..669cbd63f403 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76.h
@@ -766,6 +766,15 @@ struct mt76_vif_link {
u8 beacon_rates_idx;
struct ieee80211_chanctx_conf *ctx;
struct mt76_wcid *wcid;
+ struct mt76_vif_data *mvif;
+ struct rcu_head rcu_head;
+};
+
+struct mt76_vif_data {
+ struct mt76_vif_link __rcu *link[IEEE80211_MLD_MAX_NUM_LINKS];
+
+ u16 valid_links;
+ u8 deflink_id;
};
struct mt76_phy {
@@ -1168,6 +1177,10 @@ static inline int mt76_wed_dma_setup(struct mt76_dev *dev, struct mt76_queue *q,
for (i = 0; i < ARRAY_SIZE((dev)->q_rx); i++) \
if ((dev)->q_rx[i].ndesc)
+
+#define mt76_dereference(p, dev) \
+ rcu_dereference_protected(p, lockdep_is_held(&(dev)->mutex))
+
struct mt76_dev *mt76_alloc_device(struct device *pdev, unsigned int size,
const struct ieee80211_ops *ops,
const struct mt76_driver_ops *drv_ops);
@@ -1755,4 +1768,44 @@ void mt76_wcid_init(struct mt76_wcid *wcid);
void mt76_wcid_cleanup(struct mt76_dev *dev, struct mt76_wcid *wcid);
void mt76_wcid_add_poll(struct mt76_dev *dev, struct mt76_wcid *wcid);
+static inline void
+mt76_vif_init(struct ieee80211_vif *vif, struct mt76_vif_data *mvif)
+{
+ struct mt76_vif_link *mlink = (struct mt76_vif_link *)vif->drv_priv;
+
+ mlink->mvif = mvif;
+ rcu_assign_pointer(mvif->link[0], mlink);
+}
+
+static inline void
+mt76_vif_cleanup(struct mt76_dev *dev, struct ieee80211_vif *vif)
+{
+ struct mt76_vif_link *mlink = (struct mt76_vif_link *)vif->drv_priv;
+ struct mt76_vif_data *mvif = mlink->mvif;
+
+ rcu_assign_pointer(mvif->link[0], NULL);
+}
+
+static inline struct mt76_vif_link *
+mt76_vif_link(struct mt76_dev *dev, struct ieee80211_vif *vif, int link_id)
+{
+ struct mt76_vif_link *mlink = (struct mt76_vif_link *)vif->drv_priv;
+ struct mt76_vif_data *mvif = mlink->mvif;
+
+ return mt76_dereference(mvif->link[link_id], dev);
+}
+
+static inline struct mt76_vif_link *
+mt76_vif_conf_link(struct mt76_dev *dev, struct ieee80211_vif *vif,
+ struct ieee80211_bss_conf *link_conf)
+{
+ struct mt76_vif_link *mlink = (struct mt76_vif_link *)vif->drv_priv;
+ struct mt76_vif_data *mvif = mlink->mvif;
+
+ if (link_conf == &vif->bss_conf)
+ return mlink;
+
+ return mt76_dereference(mvif->link[link_conf->link_id], dev);
+}
+
#endif
--
2.47.1
next prev parent reply other threads:[~2025-01-02 16:35 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-02 16:34 [PATCH 01/24] wifi: mt76: add code for emulating hardware scanning Felix Fietkau
2025-01-02 16:34 ` [PATCH 02/24] wifi: mt76: add support for allocating a phy without hw Felix Fietkau
2025-01-02 16:34 ` [PATCH 03/24] wifi: mt76: rename struct mt76_vif to mt76_vif_link Felix Fietkau
2025-01-02 16:34 ` Felix Fietkau [this message]
2025-01-02 16:34 ` [PATCH 05/24] wifi: mt76: mt7996: split link specific data from struct mt7996_vif Felix Fietkau
2025-01-02 16:34 ` [PATCH 06/24] wifi: mt76: initialize more wcid fields mt76_wcid_init Felix Fietkau
2025-01-02 16:34 ` [PATCH 07/24] wifi: mt76: add chanctx functions for multi-channel phy support Felix Fietkau
2025-01-02 16:34 ` [PATCH 08/24] wifi: mt76: remove dev->wcid_phy_mask Felix Fietkau
2025-01-02 16:34 ` [PATCH 09/24] wifi: mt76: add multi-radio support to a few core hw ops Felix Fietkau
2025-01-02 16:34 ` [PATCH 10/24] wifi: mt76: add multi-radio support to tx scheduling Felix Fietkau
2025-01-02 16:34 ` [PATCH 11/24] wifi: mt76: add multi-radio support to scanning code Felix Fietkau
2025-01-02 16:34 ` [PATCH 12/24] wifi: mt76: add multi-radio remain_on_channel functions Felix Fietkau
2025-01-02 16:34 ` [PATCH 13/24] wifi: mt76: mt7996: use emulated hardware scan support Felix Fietkau
2025-01-02 16:34 ` [PATCH 14/24] wifi: mt76: mt7996: pass wcid to mt7996_mcu_sta_hdr_trans_tlv Felix Fietkau
2025-01-02 16:34 ` [PATCH 15/24] wifi: mt76: mt7996: prepare mt7996_mcu_add_dev/bss_info for MLO support Felix Fietkau
2025-01-02 16:35 ` [PATCH 16/24] wifi: mt76: mt7996: prepare mt7996_mcu_add_beacon " Felix Fietkau
2025-01-02 16:35 ` [PATCH 17/24] wifi: mt76: mt7996: prepare mt7996_mcu_set_tx " Felix Fietkau
2025-01-02 16:35 ` [PATCH 18/24] wifi: mt76: mt7996: prepare mt7996_mcu_set_timing " Felix Fietkau
2025-01-02 16:35 ` [PATCH 19/24] wifi: mt76: connac: prepare mt76_connac_mcu_sta_basic_tlv " Felix Fietkau
2025-01-02 16:35 ` [PATCH 20/24] wifi: mt76: mt7996: prepare mt7996_mcu_update_bss_color " Felix Fietkau
2025-01-02 16:35 ` [PATCH 21/24] wifi: mt76: connac: rework connac helpers Felix Fietkau
2025-01-02 16:35 ` [PATCH 22/24] wifi: mt76: mt7996: move all debugfs files to the primary phy Felix Fietkau
2025-01-02 16:35 ` [PATCH 23/24] wifi: mt76: mt7996: switch to single multi-radio wiphy Felix Fietkau
2025-05-01 21:45 ` Ben Greear
2025-01-02 16:35 ` [PATCH 24/24] wifi: mt76: mt7996: fix monitor mode Felix Fietkau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250102163508.52945-4-nbd@nbd.name \
--to=nbd@nbd.name \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox