Linux wireless drivers development
 help / color / mirror / Atom feed
From: Felix Fietkau <nbd@nbd.name>
To: linux-wireless@vger.kernel.org
Subject: [PATCH 24/24] wifi: mt76: mt7996: fix monitor mode
Date: Thu,  2 Jan 2025 17:35:08 +0100	[thread overview]
Message-ID: <20250102163508.52945-24-nbd@nbd.name> (raw)
In-Reply-To: <20250102163508.52945-1-nbd@nbd.name>

Enable sniffer mode via MCU command in order to properly enable promiscuous
mode on the device.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 .../net/wireless/mediatek/mt76/mt7996/main.c  |  1 +
 .../net/wireless/mediatek/mt76/mt7996/mcu.c   | 21 +++++++++++++++++++
 .../wireless/mediatek/mt76/mt7996/mt7996.h    |  1 +
 3 files changed, 23 insertions(+)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/main.c b/drivers/net/wireless/mediatek/mt76/mt7996/main.c
index 77b97324f7d7..27826577dffc 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/main.c
@@ -368,6 +368,7 @@ static void mt7996_set_monitor(struct mt7996_phy *phy, bool enabled)
 	mt76_rmw_field(dev, MT_DMA_DCR0(phy->mt76->band_idx),
 		       MT_DMA_DCR0_RXD_G5_EN, enabled);
 	mt7996_phy_set_rxfilter(phy);
+	mt7996_mcu_set_sniffer_mode(phy, enabled);
 }
 
 static int mt7996_add_interface(struct ieee80211_hw *hw,
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
index 6abd666ff19d..58fc06a69539 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
@@ -4496,6 +4496,27 @@ int mt7996_mcu_wed_rro_reset_sessions(struct mt7996_dev *dev, u16 id)
 				 sizeof(req), true);
 }
 
+int mt7996_mcu_set_sniffer_mode(struct mt7996_phy *phy, bool enabled)
+{
+	struct mt7996_dev *dev = phy->dev;
+	struct {
+		u8 band_idx;
+		u8 _rsv[3];
+		__le16 tag;
+		__le16 len;
+		u8 enable;
+		u8 _pad[3];
+	} __packed req = {
+		.band_idx = phy->mt76->band_idx,
+		.tag = 0,
+		.len = cpu_to_le16(sizeof(req) - 4),
+		.enable = enabled,
+	};
+
+	return mt76_mcu_send_msg(&dev->mt76, MCU_WM_UNI_CMD(SNIFFER), &req,
+				 sizeof(req), true);
+}
+
 int mt7996_mcu_set_txpower_sku(struct mt7996_phy *phy)
 {
 #define TX_POWER_LIMIT_TABLE_RATE	0
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h b/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h
index 18ae2e3ad71b..1cfcac51a338 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h
@@ -621,6 +621,7 @@ void mt7996_mcu_rx_event(struct mt7996_dev *dev, struct sk_buff *skb);
 void mt7996_mcu_exit(struct mt7996_dev *dev);
 int mt7996_mcu_get_all_sta_info(struct mt7996_phy *phy, u16 tag);
 int mt7996_mcu_wed_rro_reset_sessions(struct mt7996_dev *dev, u16 id);
+int mt7996_mcu_set_sniffer_mode(struct mt7996_phy *phy, bool enabled);
 
 static inline u8 mt7996_max_interface_num(struct mt7996_dev *dev)
 {
-- 
2.47.1


      parent reply	other threads:[~2025-01-02 16:35 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-01-02 16:34 [PATCH 01/24] wifi: mt76: add code for emulating hardware scanning Felix Fietkau
2025-01-02 16:34 ` [PATCH 02/24] wifi: mt76: add support for allocating a phy without hw Felix Fietkau
2025-01-02 16:34 ` [PATCH 03/24] wifi: mt76: rename struct mt76_vif to mt76_vif_link Felix Fietkau
2025-01-02 16:34 ` [PATCH 04/24] wifi: mt76: add vif link specific data structure Felix Fietkau
2025-01-02 16:34 ` [PATCH 05/24] wifi: mt76: mt7996: split link specific data from struct mt7996_vif Felix Fietkau
2025-01-02 16:34 ` [PATCH 06/24] wifi: mt76: initialize more wcid fields mt76_wcid_init Felix Fietkau
2025-01-02 16:34 ` [PATCH 07/24] wifi: mt76: add chanctx functions for multi-channel phy support Felix Fietkau
2025-01-02 16:34 ` [PATCH 08/24] wifi: mt76: remove dev->wcid_phy_mask Felix Fietkau
2025-01-02 16:34 ` [PATCH 09/24] wifi: mt76: add multi-radio support to a few core hw ops Felix Fietkau
2025-01-02 16:34 ` [PATCH 10/24] wifi: mt76: add multi-radio support to tx scheduling Felix Fietkau
2025-01-02 16:34 ` [PATCH 11/24] wifi: mt76: add multi-radio support to scanning code Felix Fietkau
2025-01-02 16:34 ` [PATCH 12/24] wifi: mt76: add multi-radio remain_on_channel functions Felix Fietkau
2025-01-02 16:34 ` [PATCH 13/24] wifi: mt76: mt7996: use emulated hardware scan support Felix Fietkau
2025-01-02 16:34 ` [PATCH 14/24] wifi: mt76: mt7996: pass wcid to mt7996_mcu_sta_hdr_trans_tlv Felix Fietkau
2025-01-02 16:34 ` [PATCH 15/24] wifi: mt76: mt7996: prepare mt7996_mcu_add_dev/bss_info for MLO support Felix Fietkau
2025-01-02 16:35 ` [PATCH 16/24] wifi: mt76: mt7996: prepare mt7996_mcu_add_beacon " Felix Fietkau
2025-01-02 16:35 ` [PATCH 17/24] wifi: mt76: mt7996: prepare mt7996_mcu_set_tx " Felix Fietkau
2025-01-02 16:35 ` [PATCH 18/24] wifi: mt76: mt7996: prepare mt7996_mcu_set_timing " Felix Fietkau
2025-01-02 16:35 ` [PATCH 19/24] wifi: mt76: connac: prepare mt76_connac_mcu_sta_basic_tlv " Felix Fietkau
2025-01-02 16:35 ` [PATCH 20/24] wifi: mt76: mt7996: prepare mt7996_mcu_update_bss_color " Felix Fietkau
2025-01-02 16:35 ` [PATCH 21/24] wifi: mt76: connac: rework connac helpers Felix Fietkau
2025-01-02 16:35 ` [PATCH 22/24] wifi: mt76: mt7996: move all debugfs files to the primary phy Felix Fietkau
2025-01-02 16:35 ` [PATCH 23/24] wifi: mt76: mt7996: switch to single multi-radio wiphy Felix Fietkau
2025-05-01 21:45   ` Ben Greear
2025-01-02 16:35 ` Felix Fietkau [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250102163508.52945-24-nbd@nbd.name \
    --to=nbd@nbd.name \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox