From: Sean Wang <sean.wang@kernel.org>
To: nbd@nbd.name, lorenzo.bianconi@redhat.com
Cc: linux-wireless@vger.kernel.org,
linux-mediatek@lists.infradead.org, Javier Tia <floss@jetm.me>,
Sean Wang <sean.wang@mediatek.com>
Subject: [PATCH v5 09/21] wifi: mt76: mt7925: disable ASPM and runtime PM for MT7927
Date: Sat, 25 Apr 2026 14:49:59 -0500 [thread overview]
Message-ID: <20260425195011.790265-10-sean.wang@kernel.org> (raw)
In-Reply-To: <20260425195011.790265-1-sean.wang@kernel.org>
From: Javier Tia <floss@jetm.me>
Disable PCIe ASPM unconditionally for MT7927. The CONNINFRA power
domain and WFDMA register access are unreliable with PCIe L1 active,
causing throughput to drop from 1+ Gbps to ~200 Mbps.
Disable runtime PM and deep sleep for MT7927. The combo chip shares
a CONNINFRA power domain between WiFi (PCIe) and BT (USB).
SET_OWN/CLR_OWN transitions on the LPCTL register crash the BT
firmware, requiring a full power cycle to recover. PM enablement will
be addressed in a follow-up once safe power state transitions are
determined.
Reviewed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Javier Tia <floss@jetm.me>
---
drivers/net/wireless/mediatek/mt76/mt7925/init.c | 3 ++-
drivers/net/wireless/mediatek/mt76/mt7925/pci.c | 6 ++++--
2 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/init.c b/drivers/net/wireless/mediatek/mt76/mt7925/init.c
index c0c5cb9aff75..a8c2ca7c0efc 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/init.c
@@ -232,7 +232,8 @@ int mt7925_register_device(struct mt792x_dev *dev)
dev->pm.idle_timeout = MT792x_PM_TIMEOUT;
dev->pm.stats.last_wake_event = jiffies;
dev->pm.stats.last_doze_event = jiffies;
- if (!mt76_is_usb(&dev->mt76)) {
+ /* MT7927: runtime PM crashes BT firmware on the shared CONNINFRA domain */
+ if (!mt76_is_usb(&dev->mt76) && !is_mt7927(&dev->mt76)) {
dev->pm.enable_user = true;
dev->pm.enable = true;
dev->pm.ds_enable_user = true;
diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/pci.c b/drivers/net/wireless/mediatek/mt76/mt7925/pci.c
index 604c0e9ae7ba..1f05c212be02 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/pci.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/pci.c
@@ -350,7 +350,10 @@ static int mt7925_pci_probe(struct pci_dev *pdev,
if (ret)
goto err_free_pci_vec;
- if (mt7925_disable_aspm)
+ is_mt7927_hw = (pdev->device == 0x6639 || pdev->device == 0x7927);
+
+ /* MT7927: ASPM L1 causes unreliable WFDMA register access */
+ if (mt7925_disable_aspm || is_mt7927_hw)
mt76_pci_disable_aspm(pdev);
ops = mt792x_get_mac80211_ops(&pdev->dev, &mt7925_ops,
@@ -371,7 +374,6 @@ static int mt7925_pci_probe(struct pci_dev *pdev,
dev = container_of(mdev, struct mt792x_dev, mt76);
dev->fw_features = features;
dev->hif_ops = &mt7925_pcie_ops;
- is_mt7927_hw = (pdev->device == 0x6639 || pdev->device == 0x7927);
dev->irq_map = is_mt7927_hw ? &mt7927_irq_map : &irq_map;
mt76_mmio_init(&dev->mt76, pcim_iomap_table(pdev)[0]);
tasklet_init(&mdev->irq_tasklet, mt792x_irq_tasklet, (unsigned long)dev);
--
2.43.0
next prev parent reply other threads:[~2026-04-25 19:51 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-25 19:49 [PATCH v5 00/21] wifi: mt76: mt7925: MT7927 (Filogic 380) support Sean Wang
2026-04-25 19:49 ` [PATCH v5 01/21] wifi: mt76: mt7925: fix stale pointer comparisons in change_vif_links Sean Wang
2026-04-25 19:49 ` [PATCH v5 02/21] wifi: mt76: mt7925: add 320MHz bandwidth to bss_rlm_tlv Sean Wang
2026-04-25 19:49 ` [PATCH v5 03/21] wifi: mt76: mt7925: handle 320MHz bandwidth in RXV and TXS Sean Wang
2026-04-25 19:49 ` [PATCH v5 04/21] wifi: mt76: mt7925: populate EHT 320MHz MCS map in sta_rec Sean Wang
2026-04-25 19:49 ` [PATCH v5 05/21] wifi: mt76: mt7925: advertise EHT 320MHz capabilities for 6GHz band Sean Wang
2026-04-25 19:49 ` [PATCH v5 06/21] wifi: mt76: mt7925: add MT7927 chip ID helpers Sean Wang
2026-04-25 19:49 ` [PATCH v5 07/21] wifi: mt76: mt7925: add MT7927 firmware paths Sean Wang
2026-04-25 19:49 ` [PATCH v5 08/21] wifi: mt76: mt7925: use irq_map for chip-specific interrupt handling Sean Wang
2026-04-25 19:49 ` Sean Wang [this message]
2026-04-25 19:50 ` [PATCH v5 10/21] wifi: mt76: connac: replace is_mt7925() with is_connac3() Sean Wang
2026-04-25 19:50 ` [PATCH v5 11/21] wifi: mt76: mt7925: use link-specific removal for non-MLD STA Sean Wang
2026-04-25 19:50 ` [PATCH v5 12/21] wifi: mt76: connac: tolerate inactive BSS deactivation Sean Wang
2026-04-25 19:50 ` [PATCH v5 13/21] wifi: mt76: mt792x: add MT7927 WFSYS reset support Sean Wang
2026-04-25 19:50 ` [PATCH v5 14/21] wifi: mt76: mt792x: factor out common DMA queue allocation Sean Wang
2026-04-25 19:50 ` [PATCH v5 15/21] wifi: mt76: mt7925: switch DMA init to common mt792x queue helpers Sean Wang
2026-04-25 19:50 ` [PATCH v5 16/21] wifi: mt76: mt792x: add MT7927-specific PCIe DMA support Sean Wang
2026-04-25 19:50 ` [PATCH v5 17/21] wifi: mt76: mt7925: sync MT7927 BSS band assignment Sean Wang
2026-04-25 19:50 ` [PATCH v5 18/21] wifi: mt76: mt7925: add MBMC event handling Sean Wang
2026-04-25 19:50 ` [PATCH v5 19/21] wifi: mt76: mt792x: enable CNM ops for MT7927 Sean Wang
2026-04-25 19:50 ` [PATCH v5 20/21] wifi: mt76: mt7925: add MT7927 PCIe support Sean Wang
2026-04-25 19:50 ` [PATCH v5 21/21] wifi: mt76: mt7925: add MT7927 USB support Sean Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260425195011.790265-10-sean.wang@kernel.org \
--to=sean.wang@kernel.org \
--cc=floss@jetm.me \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=lorenzo.bianconi@redhat.com \
--cc=nbd@nbd.name \
--cc=sean.wang@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox