From: Sean Wang <sean.wang@kernel.org>
To: nbd@nbd.name, lorenzo.bianconi@redhat.com
Cc: linux-wireless@vger.kernel.org,
linux-mediatek@lists.infradead.org, "Javier Tia" <floss@jetm.me>,
"Marcin FM" <marcin@lgic.pl>,
"Cristian-Florin Radoi" <radoi.chris@gmail.com>,
"George Salukvadze" <giosal90@gmail.com>,
"Evgeny Kapusta" <3193631@gmail.com>,
"Samu Toljamo" <samu.toljamo@gmail.com>,
"Ariel Rosenfeld" <ariel.rosenfeld.750@gmail.com>,
"Chapuis Dario" <chapuisdario4@gmail.com>,
"Thibaut François" <tibo@humeurlibre.fr>,
张旭涵 <Loong.0x00@gmail.com>, "Sean Wang" <sean.wang@mediatek.com>
Subject: [PATCH v5 05/21] wifi: mt76: mt7925: advertise EHT 320MHz capabilities for 6GHz band
Date: Sat, 25 Apr 2026 14:49:55 -0500 [thread overview]
Message-ID: <20260425195011.790265-6-sean.wang@kernel.org> (raw)
In-Reply-To: <20260425195011.790265-1-sean.wang@kernel.org>
From: Javier Tia <floss@jetm.me>
mt7925_init_eht_caps() only populates EHT MCS/NSS maps for BW <= 80
and BW = 160, but never sets BW = 320. This means iw phy shows no
320MHz MCS map entries even though the hardware supports 320MHz
operation in the 6GHz band.
Add the missing 320MHz capability bits for 6GHz:
- PHY_CAP0: IEEE80211_EHT_PHY_CAP0_320MHZ_IN_6GHZ
- PHY_CAP1: beamformee SS for 320MHz
- PHY_CAP2: sounding dimensions for 320MHz
- PHY_CAP6: MCS15 support for 320MHz width
- MCS/NSS: populate bw._320 maps for 6GHz band
Introduce is_320mhz_supported() to gate 320MHz on MT7927 only, since
MT7925 does not support 320MHz operation.
Tested-by: Marcin FM <marcin@lgic.pl>
Tested-by: Cristian-Florin Radoi <radoi.chris@gmail.com>
Tested-by: George Salukvadze <giosal90@gmail.com>
Tested-by: Evgeny Kapusta <3193631@gmail.com>
Tested-by: Samu Toljamo <samu.toljamo@gmail.com>
Tested-by: Ariel Rosenfeld <ariel.rosenfeld.750@gmail.com>
Tested-by: Chapuis Dario <chapuisdario4@gmail.com>
Tested-by: Thibaut François <tibo@humeurlibre.fr>
Tested-by: 张旭涵 <Loong.0x00@gmail.com>
Reviewed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Javier Tia <floss@jetm.me>
---
.../net/wireless/mediatek/mt76/mt76_connac.h | 5 +++++
.../net/wireless/mediatek/mt76/mt7925/main.c | 22 ++++++++++++++++++-
2 files changed, 26 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac.h b/drivers/net/wireless/mediatek/mt76/mt76_connac.h
index 51423c7740bd..802cb26ed6e3 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76_connac.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76_connac.h
@@ -177,6 +177,11 @@ static inline bool is_mt7925(struct mt76_dev *dev)
return mt76_chip(dev) == 0x7925;
}
+static inline bool is_320mhz_supported(struct mt76_dev *dev)
+{
+ return mt76_chip(dev) == 0x7927;
+}
+
static inline bool is_mt7920(struct mt76_dev *dev)
{
return mt76_chip(dev) == 0x7920;
diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/main.c b/drivers/net/wireless/mediatek/mt76/mt7925/main.c
index 4d8ca04a128b..bf38d6502970 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/main.c
@@ -183,6 +183,10 @@ mt7925_init_eht_caps(struct mt792x_phy *phy, enum nl80211_band band,
IEEE80211_EHT_PHY_CAP0_SU_BEAMFORMER |
IEEE80211_EHT_PHY_CAP0_SU_BEAMFORMEE;
+ if (band == NL80211_BAND_6GHZ && is_320mhz_supported(&phy->dev->mt76))
+ eht_cap_elem->phy_cap_info[0] |=
+ IEEE80211_EHT_PHY_CAP0_320MHZ_IN_6GHZ;
+
eht_cap_elem->phy_cap_info[0] |=
u8_encode_bits(u8_get_bits(sts - 1, BIT(0)),
IEEE80211_EHT_PHY_CAP0_BEAMFORMEE_SS_80MHZ_MASK);
@@ -193,10 +197,20 @@ mt7925_init_eht_caps(struct mt792x_phy *phy, enum nl80211_band band,
u8_encode_bits(sts - 1,
IEEE80211_EHT_PHY_CAP1_BEAMFORMEE_SS_160MHZ_MASK);
+ if (band == NL80211_BAND_6GHZ && is_320mhz_supported(&phy->dev->mt76))
+ eht_cap_elem->phy_cap_info[1] |=
+ u8_encode_bits(sts - 1,
+ IEEE80211_EHT_PHY_CAP1_BEAMFORMEE_SS_320MHZ_MASK);
+
eht_cap_elem->phy_cap_info[2] =
u8_encode_bits(sts - 1, IEEE80211_EHT_PHY_CAP2_SOUNDING_DIM_80MHZ_MASK) |
u8_encode_bits(sts - 1, IEEE80211_EHT_PHY_CAP2_SOUNDING_DIM_160MHZ_MASK);
+ if (band == NL80211_BAND_6GHZ && is_320mhz_supported(&phy->dev->mt76))
+ eht_cap_elem->phy_cap_info[2] |=
+ u8_encode_bits(sts - 1,
+ IEEE80211_EHT_PHY_CAP2_SOUNDING_DIM_320MHZ_MASK);
+
eht_cap_elem->phy_cap_info[3] =
IEEE80211_EHT_PHY_CAP3_NG_16_SU_FEEDBACK |
IEEE80211_EHT_PHY_CAP3_NG_16_MU_FEEDBACK |
@@ -217,7 +231,8 @@ mt7925_init_eht_caps(struct mt792x_phy *phy, enum nl80211_band band,
u8_encode_bits(u8_get_bits(0x11, GENMASK(1, 0)),
IEEE80211_EHT_PHY_CAP5_MAX_NUM_SUPP_EHT_LTF_MASK);
- val = width == NL80211_CHAN_WIDTH_160 ? 0x7 :
+ val = width == NL80211_CHAN_WIDTH_320 ? 0xf :
+ width == NL80211_CHAN_WIDTH_160 ? 0x7 :
width == NL80211_CHAN_WIDTH_80 ? 0x3 : 0x1;
eht_cap_elem->phy_cap_info[6] =
u8_encode_bits(u8_get_bits(0x11, GENMASK(4, 2)),
@@ -239,6 +254,11 @@ mt7925_init_eht_caps(struct mt792x_phy *phy, enum nl80211_band band,
eht_nss->bw._160.rx_tx_mcs9_max_nss = val;
eht_nss->bw._160.rx_tx_mcs11_max_nss = val;
eht_nss->bw._160.rx_tx_mcs13_max_nss = val;
+ if (band == NL80211_BAND_6GHZ && is_320mhz_supported(&phy->dev->mt76)) {
+ eht_nss->bw._320.rx_tx_mcs9_max_nss = val;
+ eht_nss->bw._320.rx_tx_mcs11_max_nss = val;
+ eht_nss->bw._320.rx_tx_mcs13_max_nss = val;
+ }
}
int mt7925_init_mlo_caps(struct mt792x_phy *phy)
--
2.43.0
next prev parent reply other threads:[~2026-04-25 19:50 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-25 19:49 [PATCH v5 00/21] wifi: mt76: mt7925: MT7927 (Filogic 380) support Sean Wang
2026-04-25 19:49 ` [PATCH v5 01/21] wifi: mt76: mt7925: fix stale pointer comparisons in change_vif_links Sean Wang
2026-04-25 19:49 ` [PATCH v5 02/21] wifi: mt76: mt7925: add 320MHz bandwidth to bss_rlm_tlv Sean Wang
2026-04-25 19:49 ` [PATCH v5 03/21] wifi: mt76: mt7925: handle 320MHz bandwidth in RXV and TXS Sean Wang
2026-04-25 19:49 ` [PATCH v5 04/21] wifi: mt76: mt7925: populate EHT 320MHz MCS map in sta_rec Sean Wang
2026-04-25 19:49 ` Sean Wang [this message]
2026-04-25 19:49 ` [PATCH v5 06/21] wifi: mt76: mt7925: add MT7927 chip ID helpers Sean Wang
2026-04-25 19:49 ` [PATCH v5 07/21] wifi: mt76: mt7925: add MT7927 firmware paths Sean Wang
2026-04-25 19:49 ` [PATCH v5 08/21] wifi: mt76: mt7925: use irq_map for chip-specific interrupt handling Sean Wang
2026-04-25 19:49 ` [PATCH v5 09/21] wifi: mt76: mt7925: disable ASPM and runtime PM for MT7927 Sean Wang
2026-04-25 19:50 ` [PATCH v5 10/21] wifi: mt76: connac: replace is_mt7925() with is_connac3() Sean Wang
2026-04-25 19:50 ` [PATCH v5 11/21] wifi: mt76: mt7925: use link-specific removal for non-MLD STA Sean Wang
2026-04-25 19:50 ` [PATCH v5 12/21] wifi: mt76: connac: tolerate inactive BSS deactivation Sean Wang
2026-04-25 19:50 ` [PATCH v5 13/21] wifi: mt76: mt792x: add MT7927 WFSYS reset support Sean Wang
2026-04-25 19:50 ` [PATCH v5 14/21] wifi: mt76: mt792x: factor out common DMA queue allocation Sean Wang
2026-04-25 19:50 ` [PATCH v5 15/21] wifi: mt76: mt7925: switch DMA init to common mt792x queue helpers Sean Wang
2026-04-25 19:50 ` [PATCH v5 16/21] wifi: mt76: mt792x: add MT7927-specific PCIe DMA support Sean Wang
2026-04-25 19:50 ` [PATCH v5 17/21] wifi: mt76: mt7925: sync MT7927 BSS band assignment Sean Wang
2026-04-25 19:50 ` [PATCH v5 18/21] wifi: mt76: mt7925: add MBMC event handling Sean Wang
2026-04-25 19:50 ` [PATCH v5 19/21] wifi: mt76: mt792x: enable CNM ops for MT7927 Sean Wang
2026-04-25 19:50 ` [PATCH v5 20/21] wifi: mt76: mt7925: add MT7927 PCIe support Sean Wang
2026-04-25 19:50 ` [PATCH v5 21/21] wifi: mt76: mt7925: add MT7927 USB support Sean Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260425195011.790265-6-sean.wang@kernel.org \
--to=sean.wang@kernel.org \
--cc=3193631@gmail.com \
--cc=Loong.0x00@gmail.com \
--cc=ariel.rosenfeld.750@gmail.com \
--cc=chapuisdario4@gmail.com \
--cc=floss@jetm.me \
--cc=giosal90@gmail.com \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=lorenzo.bianconi@redhat.com \
--cc=marcin@lgic.pl \
--cc=nbd@nbd.name \
--cc=radoi.chris@gmail.com \
--cc=samu.toljamo@gmail.com \
--cc=sean.wang@mediatek.com \
--cc=tibo@humeurlibre.fr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox