[PATCH v5 02/21] wifi: mt76: mt7925: add 320MHz bandwidth to bss_rlm_tlv

[Sean Wang <sean.wang@kernel.org>]

From: Javier Tia <floss@jetm.me>

bss_rlm_tlv() in mt7925_mcu_bss_rlm_tlv() has no case for
NL80211_CHAN_WIDTH_320. When associated to a 320MHz BSS, the switch
falls through to default and sends bw=0 (CMD_CBW_20MHZ) to firmware
via BSS_RLM TLV. Firmware then configures the RX radio for 20MHz
and cannot decode the AP's 320MHz frames, resulting in complete data
path failure at 320MHz.

Add the missing NL80211_CHAN_WIDTH_320 case with CMD_CBW_320MHZ and
center_chan2.

Tested on ASUS RT-BE92U: 320MHz throughput goes from 0 Mbps to
841 Mbps (iperf3 -t30 -P8), PHY 4803 Mbps EHT-MCS11.

Reported-by: 张旭涵 <Loong.0x00@gmail.com>
Closes: https://github.com/openwrt/mt76/issues/927
Tested-by: 张旭涵 <Loong.0x00@gmail.com>
Tested-by: Marcin FM <marcin@lgic.pl>
Tested-by: Cristian-Florin Radoi <radoi.chris@gmail.com>
Tested-by: George Salukvadze <giosal90@gmail.com>
Tested-by: Evgeny Kapusta <3193631@gmail.com>
Tested-by: Samu Toljamo <samu.toljamo@gmail.com>
Tested-by: Ariel Rosenfeld <ariel.rosenfeld.750@gmail.com>
Tested-by: Chapuis Dario <chapuisdario4@gmail.com>
Tested-by: Thibaut François <tibo@humeurlibre.fr>
Reviewed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Javier Tia <floss@jetm.me>
---
 drivers/net/wireless/mediatek/mt76/mt7925/mcu.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
index 37cdf3e8a067..016c534f748c 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
@@ -2334,6 +2334,10 @@ void mt7925_mcu_bss_rlm_tlv(struct sk_buff *skb, struct mt76_phy *phy,
 	case NL80211_CHAN_WIDTH_160:
 		req->bw = CMD_CBW_160MHZ;
 		break;
+	case NL80211_CHAN_WIDTH_320:
+		req->bw = CMD_CBW_320MHZ;
+		req->center_chan2 = ieee80211_frequency_to_channel(freq2);
+		break;
 	case NL80211_CHAN_WIDTH_5:
 		req->bw = CMD_CBW_5MHZ;
 		break;
-- 
2.43.0