From: Sean Wang <sean.wang@kernel.org>
To: nbd@nbd.name
Cc: linux-wireless@vger.kernel.org,
linux-mediatek@lists.infradead.org, yu-ching.liu@mediatek.com,
jenhao.yang@mediatek.com, posh.sun@mediatek.com,
Jacobs Wu <jacobs.wu@mediatek.com>,
Sean Wang <sean.wang@mediatek.com>
Subject: [PATCH 11/23] wifi: mt76: mt7925: do not disable RX NAPI twice on unload
Date: Sun, 27 Sep 2026 16:02:53 -0500 [thread overview]
Message-ID: <20260927210306.737669-12-sean.wang@kernel.org> (raw)
In-Reply-To: <20260927210306.737669-1-sean.wang@kernel.org>
From: Jacobs Wu <jacobs.wu@mediatek.com>
mt7925e_unregister_device() disables every RX NAPI and then calls
mt792x_dma_cleanup(), whose mt76_dma_cleanup() disables them again.
The second napi_disable() spins waiting for NAPI_STATE_SCHED, which the
first one already set and nobody will clear, so module unload hangs in
D state and the module refcount underflows to -1; only a reboot recovers.
Drop the redundant loop and leave the RX NAPI teardown to
mt76_dma_cleanup(), making driver hot-reload work again.
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Jacobs Wu <jacobs.wu@mediatek.com>
---
drivers/net/wireless/mediatek/mt76/mt7925/pci.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/pci.c b/drivers/net/wireless/mediatek/mt76/mt7925/pci.c
index 24585c992ff5..09153d624fd5 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/pci.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/pci.c
@@ -40,7 +40,6 @@ static int mt7925e_init_reset(struct mt792x_dev *dev)
static void mt7925e_unregister_device(struct mt792x_dev *dev)
{
- int i;
struct mt76_connac_pm *pm = &dev->pm;
struct ieee80211_hw *hw = mt76_hw(dev);
@@ -50,8 +49,12 @@ static void mt7925e_unregister_device(struct mt792x_dev *dev)
cancel_work_sync(&dev->reset_work);
cancel_work_sync(&dev->init_work);
mt76_unregister_device(&dev->mt76);
- mt76_for_each_q_rx(&dev->mt76, i)
- napi_disable(&dev->mt76.napi[i]);
+ /* Do not disable the RX NAPIs here: mt76_dma_cleanup(), reached below
+ * via mt792x_dma_cleanup(), disables them as part of the generic
+ * teardown. Disabling twice makes the second napi_disable() wait
+ * forever for NAPI_STATE_SCHED to clear, hanging module unload in D
+ * state with the module refcount left at -1.
+ */
cancel_delayed_work_sync(&pm->ps_work);
cancel_delayed_work_sync(&dev->mlo_pm_work);
cancel_work_sync(&pm->wake_work);
--
2.43.0
next prev parent reply other threads:[~2026-09-27 21:04 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-27 21:02 [PATCH 00/23] wifi: mt76: mt7925: add NAN security and improve NDP reliability (part 2) Sean Wang
2026-09-27 21:02 ` [PATCH 01/23] wifi: mt76: mt7925: make NMI address TLV tail padding explicit Sean Wang
2026-09-27 21:02 ` [PATCH 02/23] wifi: mt76: mt7925: add NMI/NDI MAC address setter helpers Sean Wang
2026-10-06 9:25 ` Felix Fietkau
2026-09-27 21:02 ` [PATCH 03/23] wifi: mt76: mt7925: implement NAN MAC address randomization Sean Wang
2026-10-06 9:18 ` Felix Fietkau
2026-09-27 21:02 ` [PATCH 04/23] wifi: mt76: mt7925: wire up NAN MAC randomization lifecycle Sean Wang
2026-09-27 21:02 ` [PATCH 05/23] wifi: mt76: mt7925: add NAN low power event control on suspend/resume Sean Wang
2026-09-27 21:02 ` [PATCH 06/23] wifi: mt76: mt7925: implement NAN key management MCU command Sean Wang
2026-09-27 21:02 ` [PATCH 07/23] wifi: mt76: mt7925: add per-peer RX IGTK/BIGTK and RX GTK WTBLs Sean Wang
2026-09-27 21:02 ` [PATCH 08/23] wifi: mt76: mt7925: add NDC-aware TX GTK table for NAN_DATA Sean Wang
2026-10-06 9:20 ` Felix Fietkau
2026-09-27 21:02 ` [PATCH 09/23] wifi: mt76: mt7925: implement mt7925_nan_set_key for NAN security Sean Wang
2026-09-27 21:02 ` [PATCH 10/23] wifi: mt76: mt7925: install NAN BIP keys standalone in sta_key_tlv Sean Wang
2026-09-27 21:02 ` Sean Wang [this message]
2026-09-27 21:02 ` [PATCH 12/23] wifi: mt76: mt7925: assign the interface WTBL to the NAN management TXQ Sean Wang
2026-09-27 21:02 ` [PATCH 13/23] wifi: mt76: mt7925: do not deactivate shared NAN BSS on peer STA removal Sean Wang
2026-09-27 21:02 ` [PATCH 14/23] wifi: mt76: gate NAN unicast mgmt by peer availability via STA queues Sean Wang
2026-09-27 21:02 ` [PATCH 15/23] wifi: mt76: mt7925: hold NAN mgmt TX to the discovery window Sean Wang
2026-09-27 21:02 ` [PATCH 16/23] wifi: mt76: mt7925: double the retry budget for NAN unicast management Sean Wang
2026-09-27 21:02 ` [PATCH 17/23] wifi: mt76: mt7925: let TX status of DW-held NAN frames outlive the DW period Sean Wang
2026-09-27 21:03 ` [PATCH 18/23] wifi: mt76: mt7925: defer the NAN joined-cluster event out of NAN_START Sean Wang
2026-09-27 21:03 ` [PATCH 19/23] wifi: mt76: mt7925: steer NAN handshake frames by committed-bitmap state Sean Wang
2026-09-27 21:03 ` [PATCH 20/23] wifi: mt76: mt7925: disable only the RX NAPI instances that exist Sean Wang
2026-09-27 21:03 ` [PATCH 21/23] wifi: mt76: mt7925: stop queueing resets once the device is being removed Sean Wang
2026-09-27 21:03 ` [PATCH 22/23] wifi: mt76: mt7925: bound the lifetime of NAN unicast management frames Sean Wang
2026-09-27 21:03 ` [PATCH 23/23] wifi: mt76: mt7925: always deliver the joined-cluster event through the deferred work Sean Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260927210306.737669-12-sean.wang@kernel.org \
--to=sean.wang@kernel.org \
--cc=jacobs.wu@mediatek.com \
--cc=jenhao.yang@mediatek.com \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=nbd@nbd.name \
--cc=posh.sun@mediatek.com \
--cc=sean.wang@mediatek.com \
--cc=yu-ching.liu@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox