Linux wireless drivers development
 help / color / mirror / Atom feed
From: Felix Fietkau <nbd@nbd.name>
To: Sean Wang <sean.wang@kernel.org>
Cc: linux-wireless@vger.kernel.org,
	linux-mediatek@lists.infradead.org, yu-ching.liu@mediatek.com,
	jenhao.yang@mediatek.com, posh.sun@mediatek.com,
	Chengwei Yu <chengwei.yu@mediatek.com>,
	Sean Wang <sean.wang@mediatek.com>
Subject: Re: [PATCH 03/23] wifi: mt76: mt7925: implement NAN MAC address randomization
Date: Tue, 6 Oct 2026 11:18:13 +0200	[thread overview]
Message-ID: <701d9e27-8dcc-4a34-b8aa-17e8a7c732c3@nbd.name> (raw)
In-Reply-To: <20260927210306.737669-4-sean.wang@kernel.org>

On 27.09.26 23:02, Sean Wang wrote:
> From: Chengwei Yu <chengwei.yu@mediatek.com>
> 
> Add mt7925_nan_start/stop_mac_randomization() using a per-vif
> delayed_work and period stored in struct mt792x_nan.
> 
> Per-vif (not per-dev) because the NAN iface combinations allow up
> to two concurrent NAN_DATA vifs; a single dev-wide field would
> silently lose randomization for the second NDI or let it overwrite
> the first vif's pending work.
> 
> delayed_work (not timer_list) because the work function calls
> mt7925_nan_set_nmi/ndi_address() which invokes mt76_mcu_send_msg()
> with wait_resp=true; that can sleep, which is not allowed in softirq
> context. This is consistent with scan_work, mlo_pm_work and ps_work
> in this driver.
> 
> stop_mac_randomization() must be called without holding the dev
> mutex since the work function acquires it. No caller is wired up
> yet; the next patch does that in add/remove_interface.
> 
> Co-developed-by: Sean Wang <sean.wang@mediatek.com>
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> Signed-off-by: Chengwei Yu <chengwei.yu@mediatek.com>
> ---
>   .../net/wireless/mediatek/mt76/mt7925/nan.c   | 59 +++++++++++++++++++
>   .../net/wireless/mediatek/mt76/mt7925/nan.h   |  7 +++
>   drivers/net/wireless/mediatek/mt76/mt792x.h   |  9 +++
>   3 files changed, 75 insertions(+)
> 
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/nan.c b/drivers/net/wireless/mediatek/mt76/mt7925/nan.c
> index abbd3f7b081c..0b94bd4005d4 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7925/nan.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7925/nan.c
> @@ -745,6 +745,65 @@ int mt7925_nan_set_ndi_address(struct ieee80211_vif *vif,
> [...]
> +void mt7925_nan_start_mac_randomization(struct ieee80211_vif *vif,
> +					u32 period_sec)
> +{
> +	struct mt792x_vif *mvif = (struct mt792x_vif *)vif->drv_priv;
> +	struct mt792x_dev *dev = mvif->phy->dev;
> +
> +	if (!period_sec)
> +		return;
> +
> +	mvif->nan.mac_rand_period_sec = period_sec;
> +
> +	ieee80211_queue_delayed_work(mt76_hw(dev), &mvif->nan.mac_rand_work, 0);
> +}
This function is added, but not used in this series.

- Felix

  reply	other threads:[~2026-10-06  9:18 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-27 21:02 [PATCH 00/23] wifi: mt76: mt7925: add NAN security and improve NDP reliability (part 2) Sean Wang
2026-09-27 21:02 ` [PATCH 01/23] wifi: mt76: mt7925: make NMI address TLV tail padding explicit Sean Wang
2026-09-27 21:02 ` [PATCH 02/23] wifi: mt76: mt7925: add NMI/NDI MAC address setter helpers Sean Wang
2026-10-06  9:25   ` Felix Fietkau
2026-09-27 21:02 ` [PATCH 03/23] wifi: mt76: mt7925: implement NAN MAC address randomization Sean Wang
2026-10-06  9:18   ` Felix Fietkau [this message]
2026-09-27 21:02 ` [PATCH 04/23] wifi: mt76: mt7925: wire up NAN MAC randomization lifecycle Sean Wang
2026-09-27 21:02 ` [PATCH 05/23] wifi: mt76: mt7925: add NAN low power event control on suspend/resume Sean Wang
2026-09-27 21:02 ` [PATCH 06/23] wifi: mt76: mt7925: implement NAN key management MCU command Sean Wang
2026-09-27 21:02 ` [PATCH 07/23] wifi: mt76: mt7925: add per-peer RX IGTK/BIGTK and RX GTK WTBLs Sean Wang
2026-09-27 21:02 ` [PATCH 08/23] wifi: mt76: mt7925: add NDC-aware TX GTK table for NAN_DATA Sean Wang
2026-10-06  9:20   ` Felix Fietkau
2026-09-27 21:02 ` [PATCH 09/23] wifi: mt76: mt7925: implement mt7925_nan_set_key for NAN security Sean Wang
2026-09-27 21:02 ` [PATCH 10/23] wifi: mt76: mt7925: install NAN BIP keys standalone in sta_key_tlv Sean Wang
2026-09-27 21:02 ` [PATCH 11/23] wifi: mt76: mt7925: do not disable RX NAPI twice on unload Sean Wang
2026-09-27 21:02 ` [PATCH 12/23] wifi: mt76: mt7925: assign the interface WTBL to the NAN management TXQ Sean Wang
2026-09-27 21:02 ` [PATCH 13/23] wifi: mt76: mt7925: do not deactivate shared NAN BSS on peer STA removal Sean Wang
2026-09-27 21:02 ` [PATCH 14/23] wifi: mt76: gate NAN unicast mgmt by peer availability via STA queues Sean Wang
2026-09-27 21:02 ` [PATCH 15/23] wifi: mt76: mt7925: hold NAN mgmt TX to the discovery window Sean Wang
2026-09-27 21:02 ` [PATCH 16/23] wifi: mt76: mt7925: double the retry budget for NAN unicast management Sean Wang
2026-09-27 21:02 ` [PATCH 17/23] wifi: mt76: mt7925: let TX status of DW-held NAN frames outlive the DW period Sean Wang
2026-09-27 21:03 ` [PATCH 18/23] wifi: mt76: mt7925: defer the NAN joined-cluster event out of NAN_START Sean Wang
2026-09-27 21:03 ` [PATCH 19/23] wifi: mt76: mt7925: steer NAN handshake frames by committed-bitmap state Sean Wang
2026-09-27 21:03 ` [PATCH 20/23] wifi: mt76: mt7925: disable only the RX NAPI instances that exist Sean Wang
2026-09-27 21:03 ` [PATCH 21/23] wifi: mt76: mt7925: stop queueing resets once the device is being removed Sean Wang
2026-09-27 21:03 ` [PATCH 22/23] wifi: mt76: mt7925: bound the lifetime of NAN unicast management frames Sean Wang
2026-09-27 21:03 ` [PATCH 23/23] wifi: mt76: mt7925: always deliver the joined-cluster event through the deferred work Sean Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=701d9e27-8dcc-4a34-b8aa-17e8a7c732c3@nbd.name \
    --to=nbd@nbd.name \
    --cc=chengwei.yu@mediatek.com \
    --cc=jenhao.yang@mediatek.com \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=posh.sun@mediatek.com \
    --cc=sean.wang@kernel.org \
    --cc=sean.wang@mediatek.com \
    --cc=yu-ching.liu@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox