From: Ping-Ke Shih <pkshih@realtek.com>
To: <linux-wireless@vger.kernel.org>
Cc: <ku920601@realtek.com>, <damon.chen@realtek.com>,
<phhuang@realtek.com>, <kevin_yang@realtek.com>
Subject: [PATCH rtw-next 07/11] wifi: rtw89: get default channel based on supported bands
Date: Thu, 12 Nov 2026 14:05:56 +0800 [thread overview]
Message-ID: <20261112060600.71784-8-pkshih@realtek.com> (raw)
In-Reply-To: <20261112060600.71784-1-pkshih@realtek.com>
From: Zong-Zhe Yang <kevin_yang@realtek.com>
Previously, because all chipsets support 2 GHz, default channel was
always one of 2 GHz. However, after adding RTW89_QUIRK_DISABLE_2GHZ,
wiphy might not really register NL80211_BAND_2GHZ.
Refine logic to get default channel based on bitmap of supported bands.
Besides, throw an error if there is no any supported bands to use.
Fixes: 355626a2c232 ("wifi: rtw89: 8852cu: add quirk to disable 2.4 GHz band")
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
---
drivers/net/wireless/realtek/rtw89/chan.c | 15 +++++++----
drivers/net/wireless/realtek/rtw89/chan.h | 2 +-
drivers/net/wireless/realtek/rtw89/core.c | 32 ++++++++++++++++++++---
drivers/net/wireless/realtek/rtw89/core.h | 2 +-
4 files changed, 40 insertions(+), 11 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtw89/chan.c b/drivers/net/wireless/realtek/rtw89/chan.c
index a7ba47bd9abd..6a4ea1c3f9ca 100644
--- a/drivers/net/wireless/realtek/rtw89/chan.c
+++ b/drivers/net/wireless/realtek/rtw89/chan.c
@@ -293,15 +293,20 @@ void rtw89_config_roc_chandef(struct rtw89_dev *rtwdev,
}
}
-static void rtw89_config_default_chandef(struct rtw89_dev *rtwdev)
+static int rtw89_config_default_chandef(struct rtw89_dev *rtwdev)
{
- struct cfg80211_chan_def chandef = {0};
+ struct cfg80211_chan_def chandef = {};
+ int ret;
+
+ ret = rtw89_get_default_chandef(rtwdev, &chandef);
+ if (ret)
+ return ret;
- rtw89_get_default_chandef(&chandef);
__rtw89_config_entity_chandef(rtwdev, RTW89_CHANCTX_0, &chandef);
+ return 0;
}
-void rtw89_entity_init(struct rtw89_dev *rtwdev)
+int rtw89_entity_init(struct rtw89_dev *rtwdev)
{
struct rtw89_hal *hal = &rtwdev->hal;
struct rtw89_entity_mgnt *mgnt = &hal->entity_mgnt;
@@ -321,7 +326,7 @@ void rtw89_entity_init(struct rtw89_dev *rtwdev)
hal->entity_force_hw = RTW89_PHY_NUM;
- rtw89_config_default_chandef(rtwdev);
+ return rtw89_config_default_chandef(rtwdev);
}
static bool rtw89_vif_is_active_role(struct rtw89_vif *rtwvif)
diff --git a/drivers/net/wireless/realtek/rtw89/chan.h b/drivers/net/wireless/realtek/rtw89/chan.h
index e9df90c4ce3c..509e64dfcd6d 100644
--- a/drivers/net/wireless/realtek/rtw89/chan.h
+++ b/drivers/net/wireless/realtek/rtw89/chan.h
@@ -172,7 +172,7 @@ void rtw89_config_entity_chandef(struct rtw89_dev *rtwdev,
void rtw89_config_roc_chandef(struct rtw89_dev *rtwdev,
struct rtw89_vif_link *rtwvif_link,
const struct cfg80211_chan_def *chandef);
-void rtw89_entity_init(struct rtw89_dev *rtwdev);
+int rtw89_entity_init(struct rtw89_dev *rtwdev);
enum rtw89_entity_mode rtw89_entity_recalc(struct rtw89_dev *rtwdev);
bool rtw89_entity_check_hw(struct rtw89_dev *rtwdev, enum rtw89_phy_idx phy_idx);
void rtw89_entity_force_hw(struct rtw89_dev *rtwdev, enum rtw89_phy_idx phy_idx);
diff --git a/drivers/net/wireless/realtek/rtw89/core.c b/drivers/net/wireless/realtek/rtw89/core.c
index 4467ca25f1b0..1ef8cf5f2dfd 100644
--- a/drivers/net/wireless/realtek/rtw89/core.c
+++ b/drivers/net/wireless/realtek/rtw89/core.c
@@ -401,10 +401,30 @@ static void rtw89_traffic_stats_accu(struct rtw89_dev *rtwdev,
}
}
-void rtw89_get_default_chandef(struct cfg80211_chan_def *chandef)
+static struct ieee80211_channel *rtw89_core_get_default_channel(struct rtw89_dev *rtwdev)
{
- cfg80211_chandef_create(chandef, &rtw89_channels_2ghz[0],
- NL80211_CHAN_NO_HT);
+ if (test_bit(NL80211_BAND_2GHZ, rtwdev->supported_bands))
+ return &rtw89_channels_2ghz[0];
+ if (test_bit(NL80211_BAND_5GHZ, rtwdev->supported_bands))
+ return &rtw89_channels_5ghz[0];
+ if (test_bit(NL80211_BAND_6GHZ, rtwdev->supported_bands))
+ return &rtw89_channels_6ghz[0];
+
+ return NULL;
+}
+
+int rtw89_get_default_chandef(struct rtw89_dev *rtwdev, struct cfg80211_chan_def *chandef)
+{
+ struct ieee80211_channel *dflt;
+
+ dflt = rtw89_core_get_default_channel(rtwdev);
+ if (unlikely(!dflt)) {
+ rtw89_err(rtwdev, "no valid default channel\n");
+ return -EINVAL;
+ }
+
+ cfg80211_chandef_create(chandef, dflt, NL80211_CHAN_NO_HT);
+ return 0;
}
void rtw89_get_channel_params(const struct cfg80211_chan_def *chandef,
@@ -6987,6 +7007,7 @@ int rtw89_core_init(struct rtw89_dev *rtwdev)
const struct rtw89_mac_gen_def *mac = rtwdev->chip->mac_def;
struct rtw89_btc *btc = &rtwdev->btc;
u8 band;
+ int ret;
rtwdev->io = rtw89_fw_cmd_ofld_alloc_and_get_io_ops(rtwdev);
@@ -7062,8 +7083,11 @@ int rtw89_core_init(struct rtw89_dev *rtwdev)
schedule_work(&rtwdev->load_firmware_work);
+ ret = rtw89_entity_init(rtwdev);
+ if (ret)
+ return ret;
+
rtw89_ser_init(rtwdev);
- rtw89_entity_init(rtwdev);
rtw89_sar_init(rtwdev);
rtw89_phy_ant_gain_init(rtwdev);
diff --git a/drivers/net/wireless/realtek/rtw89/core.h b/drivers/net/wireless/realtek/rtw89/core.h
index 2a691daf7dab..48ef07b1d48f 100644
--- a/drivers/net/wireless/realtek/rtw89/core.h
+++ b/drivers/net/wireless/realtek/rtw89/core.h
@@ -9534,7 +9534,7 @@ void rtw89_chip_rfk_channel(struct rtw89_dev *rtwdev,
struct rtw89_vif_link *rtwvif_link);
const struct rtw89_6ghz_span *
rtw89_get_6ghz_span(struct rtw89_dev *rtwdev, u32 center_freq);
-void rtw89_get_default_chandef(struct cfg80211_chan_def *chandef);
+int rtw89_get_default_chandef(struct rtw89_dev *rtwdev, struct cfg80211_chan_def *chandef);
void rtw89_get_channel_params(const struct cfg80211_chan_def *chandef,
struct rtw89_chan *chan);
int rtw89_set_channel(struct rtw89_dev *rtwdev);
--
2.53.0
next prev parent reply other threads:[~2026-11-12 6:06 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-12 6:05 [PATCH rtw-next 00/11] wifi: rtw89: correct no 2GHz band condition, update RTL8922D settings Ping-Ke Shih
2026-11-12 6:05 ` [PATCH rtw-next 01/11] wifi: rtw89: coex: add a notify entry for dynamic MLO RF-path switch Ping-Ke Shih
2026-11-12 6:05 ` [PATCH rtw-next 02/11] wifi: rtw89: pci: reclaim TXBD before fully draining Ping-Ke Shih
2026-11-12 6:05 ` [PATCH rtw-next 03/11] wifi: rtw89: 8922d: use efuse bias for CCK RX gain Ping-Ke Shih
2026-11-12 6:05 ` [PATCH rtw-next 04/11] wifi: rtw89: 8922d: set CFR clip threshold while setting channel Ping-Ke Shih
2026-11-12 6:05 ` [PATCH rtw-next 05/11] wifi: rtw89: 8922d: correct thermal trim range to -16~+16 programmed in efuse Ping-Ke Shih
2026-11-12 6:05 ` [PATCH rtw-next 06/11] wifi: rtw89: introduce bitmap of supported bands to deal with quirks Ping-Ke Shih
2026-11-12 6:05 ` Ping-Ke Shih [this message]
2026-11-12 6:05 ` [PATCH rtw-next 08/11] wifi: rtw89: fix band assignment in rtw89_core_update_rx_freq_from_ie() Ping-Ke Shih
2026-11-12 6:05 ` [PATCH rtw-next 09/11] wifi: rtw89: Update sequence for MLO link switch Ping-Ke Shih
2026-11-12 6:05 ` [PATCH rtw-next 10/11] wifi: rtw89: 8922d: enable dynamic antenna gain Ping-Ke Shih
2026-11-12 6:06 ` [PATCH rtw-next 11/11] wifi: rtw89: phy: fix antenna gain unit in debug output Ping-Ke Shih
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261112060600.71784-8-pkshih@realtek.com \
--to=pkshih@realtek.com \
--cc=damon.chen@realtek.com \
--cc=kevin_yang@realtek.com \
--cc=ku920601@realtek.com \
--cc=linux-wireless@vger.kernel.org \
--cc=phhuang@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox