Linux wireless drivers development
 help / color / mirror / Atom feed
From: Felix Fietkau <nbd@nbd.name>
To: linux-wireless@vger.kernel.org
Subject: [PATCH mt76-next 10/17] wifi: mt76: mt7996: send the Beacon rate table again after a full reset
Date: Sat, 21 Nov 2026 13:09:19 +0100	[thread overview]
Message-ID: <20261121120926.3603979-10-nbd@nbd.name> (raw)
In-Reply-To: <20261121120926.3603979-1-nbd@nbd.name>

mt7996_get_rates_table() sends the Beacon fixed-rate table entry only
when the rate differs from phy->beacon_rate. A full reset reloads the
firmware, which then holds its default entry. The reset keeps
phy->beacon_rate, so the Beacon update of the restart sends no entry.
Beacons then go out without the duplicate TX mode on all paths, at
lower power, after every full reset.

Forget the Beacon rate of each phy at a full reset, like omac_mask and
rxfilter, so that the restart sends the entry again.

Fixes: 254ab81f3b82 ("wifi: mt76: connac: add beacon duplicate TX mode support for mt7996")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 drivers/net/wireless/mediatek/mt76/mt7996/mac.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mac.c b/drivers/net/wireless/mediatek/mt76/mt7996/mac.c
index f4c4ca10527a..7873b87c74d7 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mac.c
@@ -2527,6 +2527,7 @@ mt7996_mac_full_reset(struct mt7996_dev *dev)
 	mt7996_for_each_phy(dev, phy) {
 		phy->omac_mask = 0;
 		phy->rxfilter |= MT_WF_RFCR_DROP_OTHER_UC;
+		phy->beacon_rate = -1;
 	}
 	dev->mld_idx_mask = 0;
 	dev->mld_remap_idx_mask = 0;
-- 
2.47.3


  parent reply	other threads:[~2026-11-21 12:09 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-21 12:09 [PATCH mt76-next 01/17] wifi: mt76: mt7996: name a new secondary link to the firmware first Felix Fietkau
2026-11-21 12:09 ` [PATCH mt76-next 02/17] wifi: mt76: add a helper to point the TXQs of a station at a wcid Felix Fietkau
2026-11-21 12:09 ` [PATCH mt76-next 03/17] wifi: mt76: mt7925: move the default link to a remaining link Felix Fietkau
2026-11-21 12:09 ` [PATCH mt76-next 04/17] wifi: mt76: mt7925: keep the deflink wcid index until station removal Felix Fietkau
2026-11-21 12:09 ` [PATCH mt76-next 05/17] wifi: mt76: mt792x: look up the TX links under RCU Felix Fietkau
2026-11-21 12:09 ` [PATCH mt76-next 06/17] wifi: mt76: mt7925: read the links under RCU in the IPv6 notifier Felix Fietkau
2026-11-21 12:09 ` [PATCH mt76-next 07/17] wifi: mt76: mt7925: abort a ROC on the BSS that requested it Felix Fietkau
2026-11-21 12:09 ` [PATCH mt76-next 08/17] wifi: mt76: mt7925: take the link conf of a removed link from old[] Felix Fietkau
2026-11-21 12:09 ` [PATCH mt76-next 09/17] wifi: mt76: mt7925: send the MLO ROC only for a station vif Felix Fietkau
2026-11-21 12:09 ` Felix Fietkau [this message]
2026-11-21 12:09 ` [PATCH mt76-next 11/17] wifi: mt76: mt7996: restore the operating channel after an L1 SER Felix Fietkau
2026-11-21 12:09 ` [PATCH mt76-next 12/17] wifi: mt76: reset the DFS state of a phy at a full reset Felix Fietkau
2026-11-21 12:09 ` [PATCH mt76-next 13/17] wifi: mt76: mt7996: abort a background CAC " Felix Fietkau
2026-11-21 12:09 ` [PATCH mt76-next 14/17] wifi: mt76: mt7915: " Felix Fietkau
2026-11-21 12:09 ` [PATCH mt76-next 15/17] wifi: mt76: mt7996: clear the airtime counts with the WTBL counters Felix Fietkau
2026-11-21 12:09 ` [PATCH mt76-next 16/17] wifi: mt76: mt7996: drop the host WTBL write of a fixed GI Felix Fietkau
2026-11-21 12:09 ` [PATCH mt76-next 17/17] wifi: mt76: mt7925: don't reset the USB device on probe Felix Fietkau

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261121120926.3603979-10-nbd@nbd.name \
    --to=nbd@nbd.name \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox