From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
To: "John W. Linville" <linville@tuxdriver.com>,
"Luis R. Rodriguez" <rodrigue@qca.qualcomm.com>
Cc: Kalle Valo <kvalo@adurom.com>,
Johannes Berg <johannes@sipsolutions.net>,
<linux-wireless@vger.kernel.org>
Subject: Re: [PATCH v2] wireless: allow Atheros card to not depend on ath.ko
Date: Mon, 3 Dec 2012 15:03:00 +0200 [thread overview]
Message-ID: <2070615.GY0XtkW6tW@lx-vladimir> (raw)
In-Reply-To: <1967408.WlU5HIbjCs@lx-vladimir>
Hi,
Any input?
Luis: does it reflect reality with Atheros drivers dependency now?
Thanks, Vladimir
On Wednesday, November 28, 2012 06:57:19 PM Vladimir Kondratiev wrote:
>
> There are 2 different things:
> - sub-menu for "Atheros Wireless cards" family
> - module ath.ko with common Atheros code
>
> Until now, they both used to depend on the same Kconfig variable ATH_COMMON.
> Thus, being "Atheros card" and "depending on ath.ko" was the same.
>
> To allow module to belong to the
> "Atheros Wireless cards" family but not use ath.ko,
> 2 conditions above need to be separated.
>
> So, this patch introduce new Kconfig variable ATH_CARDS for belonging
> to the "Atheros Wireless Cards" family; while ATH_COMMON becomes hidden
> variable to express dependency on common Atheros code in ath.ko. Modules
> that depend on this common code now express it by setting ATH_COMMON.
>
> Right now, ath6kl do not depend on common code and thus do not set ATH_COMMON.
>
> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
> ---
> drivers/net/wireless/ath/Kconfig | 7 +++++--
> drivers/net/wireless/ath/ar5523/Kconfig | 1 +
> drivers/net/wireless/ath/ath5k/Kconfig | 1 +
> drivers/net/wireless/ath/ath9k/Kconfig | 1 +
> drivers/net/wireless/ath/carl9170/Kconfig | 1 +
> 5 files changed, 9 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/wireless/ath/Kconfig
> b/drivers/net/wireless/ath/Kconfig
> index c25dcf1..1a67a4f 100644
> --- a/drivers/net/wireless/ath/Kconfig
> +++ b/drivers/net/wireless/ath/Kconfig
> @@ -1,4 +1,7 @@
> -menuconfig ATH_COMMON
> +config ATH_COMMON
> + tristate
> +
> +menuconfig ATH_CARDS
> tristate "Atheros Wireless Cards"
> depends on CFG80211 && (!UML || BROKEN)
> ---help---
> @@ -14,7 +17,7 @@ menuconfig ATH_COMMON
>
> http://wireless.kernel.org/en/users/Drivers/Atheros
>
> -if ATH_COMMON
> +if ATH_CARDS
>
> config ATH_DEBUG
> bool "Atheros wireless debugging"
> diff --git a/drivers/net/wireless/ath/ar5523/Kconfig
> b/drivers/net/wireless/ath/ar5523/Kconfig
> index 11d99ee..0d320cc 100644
> --- a/drivers/net/wireless/ath/ar5523/Kconfig
> +++ b/drivers/net/wireless/ath/ar5523/Kconfig
> @@ -1,6 +1,7 @@
> config AR5523
> tristate "Atheros AR5523 wireless driver support"
> depends on MAC80211 && USB
> + select ATH_COMMON
> select FW_LOADER
> ---help---
> This module add support for AR5523 based USB dongles such as D-Link
> diff --git a/drivers/net/wireless/ath/ath5k/Kconfig
> b/drivers/net/wireless/ath/ath5k/Kconfig
> index 338c5c4..c9f81a3 100644
> --- a/drivers/net/wireless/ath/ath5k/Kconfig
> +++ b/drivers/net/wireless/ath/ath5k/Kconfig
> @@ -1,6 +1,7 @@
> config ATH5K
> tristate "Atheros 5xxx wireless cards support"
> depends on (PCI || ATHEROS_AR231X) && MAC80211
> + select ATH_COMMON
> select MAC80211_LEDS
> select LEDS_CLASS
> select NEW_LEDS
> diff --git a/drivers/net/wireless/ath/ath9k/Kconfig
> b/drivers/net/wireless/ath/ath9k/Kconfig
> index c7aa664..5fc15bf 100644
> --- a/drivers/net/wireless/ath/ath9k/Kconfig
> +++ b/drivers/net/wireless/ath/ath9k/Kconfig
> @@ -17,6 +17,7 @@ config ATH9K_BTCOEX_SUPPORT
> config ATH9K
> tristate "Atheros 802.11n wireless cards support"
> depends on MAC80211
> + select ATH_COMMON
> select ATH9K_HW
> select MAC80211_LEDS
> select LEDS_CLASS
> diff --git a/drivers/net/wireless/ath/carl9170/Kconfig
> b/drivers/net/wireless/ath/carl9170/Kconfig
> index 267d5dc..13a2045 100644
> --- a/drivers/net/wireless/ath/carl9170/Kconfig
> +++ b/drivers/net/wireless/ath/carl9170/Kconfig
> @@ -1,6 +1,7 @@
> config CARL9170
> tristate "Linux Community AR9170 802.11n USB support"
> depends on USB && MAC80211 && EXPERIMENTAL
> + select ATH_COMMON
> select FW_LOADER
> select CRC32
> help
>
next prev parent reply other threads:[~2012-12-03 13:03 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-15 11:16 [PATCH v8 0/4] driver for 60g Wilocity chip wil6210 Vladimir Kondratiev
2012-11-15 11:16 ` [PATCH v8 1/4] wireless: Driver for 60GHz card wil6210 Vladimir Kondratiev
2012-11-15 11:17 ` [PATCH v8 2/4] wireless: allow Atheros card to not depend on ath.ko Vladimir Kondratiev
2012-11-21 11:18 ` Vladimir Kondratiev
2012-11-21 14:55 ` Kalle Valo
[not found] ` <CAB=NE6XP83QVZ8Vv1R247HLW3ep_quQ8yP9STKT5L_jMrpxUOA@mail.gmail.com>
2012-11-22 7:08 ` Kalle Valo
[not found] ` <CAB=NE6V2DTQD9Q2Chj0ftk4oYE1aykCJtCaeAu_WSp3RTVSjhA@mail.gmail.com>
2012-11-26 17:54 ` Vladimir Kondratiev
2012-11-28 13:55 ` Vladimir Kondratiev
2012-11-28 14:13 ` John W. Linville
2012-11-28 15:51 ` Vladimir Kondratiev
2012-11-28 15:53 ` [PATCH v2] " Vladimir Kondratiev
2012-11-28 16:59 ` Vladimir Kondratiev
[not found] ` <1585902.GCBvcuyASu@lx-vladimir>
2012-12-01 2:38 ` [RFC] How to manage dependency between patches John W. Linville
2012-12-02 8:14 ` Vladimir Kondratiev
2012-11-28 16:57 ` [PATCH v2] wireless: allow Atheros card to not depend on ath.ko Vladimir Kondratiev
2012-12-03 13:03 ` Vladimir Kondratiev [this message]
2012-12-03 13:46 ` John W. Linville
2012-12-04 7:59 ` Vladimir Kondratiev
2012-12-11 19:28 ` Kalle Valo
2012-12-12 8:07 ` Vladimir Kondratiev
2012-12-12 8:58 ` [PATCH] wireless: fix Atheros drivers compilation Vladimir Kondratiev
2012-12-12 17:08 ` Kalle Valo
2012-12-12 17:25 ` [PATCH v2] " Vladimir Kondratiev
2012-12-12 17:32 ` Kalle Valo
2012-11-15 11:17 ` [PATCH v8 3/4] wireless: integrate wil6210 driver into build Vladimir Kondratiev
2012-11-15 11:17 ` [PATCH v8 4/4] dynamic_debug: dynamic hex dump Vladimir Kondratiev
2012-11-15 11:52 ` Vladimir Kondratiev
2012-11-15 15:55 ` Andrei Emeltchenko
2012-11-15 17:32 ` Joe Perches
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2070615.GY0XtkW6tW@lx-vladimir \
--to=qca_vkondrat@qca.qualcomm.com \
--cc=johannes@sipsolutions.net \
--cc=kvalo@adurom.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=rodrigue@qca.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox