* [PATCH v2 01/13] ath10k: introduce dynamic WMI structures
2013-09-26 9:29 [PATCH v2 00/13] ath10k: dual-firmware support (MAIN and 10.X) Bartosz Markowski
@ 2013-09-26 9:29 ` Bartosz Markowski
2013-09-26 9:29 ` [PATCH v2 02/13] ath10k: add wmi_10x_<cmd/event> definitions Bartosz Markowski
` (12 subsequent siblings)
13 siblings, 0 replies; 17+ messages in thread
From: Bartosz Markowski @ 2013-09-26 9:29 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Bartosz Markowski
This is the initial framework to implement dynamic
WMI API in order to support new firmware (from so
called 10.X branch)
The realization is to have a static WMI cmd map for
each of the firmwares, registered upom wmi init.
This patch creates such map for MAIN FW, updates
wmi_cmd_send() calls to take as a parameter
the map value instead of direct WMI enum.
As soon as complete 10.X API will be on place,
we will introduce the FW IE mechanics to dynamicaly
identify which FW is being used and based on that
we will use correct map, API, structures, etc.
Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
---
drivers/net/wireless/ath/ath10k/core.h | 4 +
drivers/net/wireless/ath/ath10k/wmi.c | 230 ++++++++++++++++++++++++++------
drivers/net/wireless/ath/ath10k/wmi.h | 112 ++++++++++++++++
3 files changed, 305 insertions(+), 41 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 292ad45..acfee7c 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -107,6 +107,7 @@ struct ath10k_wmi {
struct completion service_ready;
struct completion unified_ready;
wait_queue_head_t tx_credits_wq;
+ struct wmi_cmd_map *cmd;
};
struct ath10k_peer_stat {
@@ -268,6 +269,9 @@ enum ath10k_fw_features {
/* wmi_mgmt_rx_hdr contains extra RSSI information */
ATH10K_FW_FEATURE_EXT_WMI_MGMT_RX = 0,
+ /* firmware from 10X branch */
+ ATH10K_FW_FEATURE_WMI_10X = 1,
+
/* keep last */
ATH10K_FW_FEATURE_COUNT,
};
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 6803ead..1296dbe 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -23,6 +23,128 @@
#include "wmi.h"
#include "mac.h"
+/* MAIN WMI cmd track */
+static struct wmi_cmd_map wmi_cmd_map = {
+ .init_cmdid = WMI_INIT_CMDID,
+ .start_scan_cmdid = WMI_START_SCAN_CMDID,
+ .stop_scan_cmdid = WMI_STOP_SCAN_CMDID,
+ .scan_chan_list_cmdid = WMI_SCAN_CHAN_LIST_CMDID,
+ .scan_sch_prio_tbl_cmdid = WMI_SCAN_SCH_PRIO_TBL_CMDID,
+ .pdev_set_regdomain_cmdid = WMI_PDEV_SET_REGDOMAIN_CMDID,
+ .pdev_set_channel_cmdid = WMI_PDEV_SET_CHANNEL_CMDID,
+ .pdev_set_param_cmdid = WMI_PDEV_SET_PARAM_CMDID,
+ .pdev_pktlog_enable_cmdid = WMI_PDEV_PKTLOG_ENABLE_CMDID,
+ .pdev_pktlog_disable_cmdid = WMI_PDEV_PKTLOG_DISABLE_CMDID,
+ .pdev_set_wmm_params_cmdid = WMI_PDEV_SET_WMM_PARAMS_CMDID,
+ .pdev_set_ht_cap_ie_cmdid = WMI_PDEV_SET_HT_CAP_IE_CMDID,
+ .pdev_set_vht_cap_ie_cmdid = WMI_PDEV_SET_VHT_CAP_IE_CMDID,
+ .pdev_set_dscp_tid_map_cmdid = WMI_PDEV_SET_DSCP_TID_MAP_CMDID,
+ .pdev_set_quiet_mode_cmdid = WMI_PDEV_SET_QUIET_MODE_CMDID,
+ .pdev_green_ap_ps_enable_cmdid = WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID,
+ .pdev_get_tpc_config_cmdid = WMI_PDEV_GET_TPC_CONFIG_CMDID,
+ .pdev_set_base_macaddr_cmdid = WMI_PDEV_SET_BASE_MACADDR_CMDID,
+ .vdev_create_cmdid = WMI_VDEV_CREATE_CMDID,
+ .vdev_delete_cmdid = WMI_VDEV_DELETE_CMDID,
+ .vdev_start_request_cmdid = WMI_VDEV_START_REQUEST_CMDID,
+ .vdev_restart_request_cmdid = WMI_VDEV_RESTART_REQUEST_CMDID,
+ .vdev_up_cmdid = WMI_VDEV_UP_CMDID,
+ .vdev_stop_cmdid = WMI_VDEV_STOP_CMDID,
+ .vdev_down_cmdid = WMI_VDEV_DOWN_CMDID,
+ .vdev_set_param_cmdid = WMI_VDEV_SET_PARAM_CMDID,
+ .vdev_install_key_cmdid = WMI_VDEV_INSTALL_KEY_CMDID,
+ .peer_create_cmdid = WMI_PEER_CREATE_CMDID,
+ .peer_delete_cmdid = WMI_PEER_DELETE_CMDID,
+ .peer_flush_tids_cmdid = WMI_PEER_FLUSH_TIDS_CMDID,
+ .peer_set_param_cmdid = WMI_PEER_SET_PARAM_CMDID,
+ .peer_assoc_cmdid = WMI_PEER_ASSOC_CMDID,
+ .peer_add_wds_entry_cmdid = WMI_PEER_ADD_WDS_ENTRY_CMDID,
+ .peer_remove_wds_entry_cmdid = WMI_PEER_REMOVE_WDS_ENTRY_CMDID,
+ .peer_mcast_group_cmdid = WMI_PEER_MCAST_GROUP_CMDID,
+ .bcn_tx_cmdid = WMI_BCN_TX_CMDID,
+ .pdev_send_bcn_cmdid = WMI_PDEV_SEND_BCN_CMDID,
+ .bcn_tmpl_cmdid = WMI_BCN_TMPL_CMDID,
+ .bcn_filter_rx_cmdid = WMI_BCN_FILTER_RX_CMDID,
+ .prb_req_filter_rx_cmdid = WMI_PRB_REQ_FILTER_RX_CMDID,
+ .mgmt_tx_cmdid = WMI_MGMT_TX_CMDID,
+ .prb_tmpl_cmdid = WMI_PRB_TMPL_CMDID,
+ .addba_clear_resp_cmdid = WMI_ADDBA_CLEAR_RESP_CMDID,
+ .addba_send_cmdid = WMI_ADDBA_SEND_CMDID,
+ .addba_status_cmdid = WMI_ADDBA_STATUS_CMDID,
+ .delba_send_cmdid = WMI_DELBA_SEND_CMDID,
+ .addba_set_resp_cmdid = WMI_ADDBA_SET_RESP_CMDID,
+ .send_singleamsdu_cmdid = WMI_SEND_SINGLEAMSDU_CMDID,
+ .sta_powersave_mode_cmdid = WMI_STA_POWERSAVE_MODE_CMDID,
+ .sta_powersave_param_cmdid = WMI_STA_POWERSAVE_PARAM_CMDID,
+ .sta_mimo_ps_mode_cmdid = WMI_STA_MIMO_PS_MODE_CMDID,
+ .pdev_dfs_enable_cmdid = WMI_PDEV_DFS_ENABLE_CMDID,
+ .pdev_dfs_disable_cmdid = WMI_PDEV_DFS_DISABLE_CMDID,
+ .roam_scan_mode = WMI_ROAM_SCAN_MODE,
+ .roam_scan_rssi_threshold = WMI_ROAM_SCAN_RSSI_THRESHOLD,
+ .roam_scan_period = WMI_ROAM_SCAN_PERIOD,
+ .roam_scan_rssi_change_threshold = WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
+ .roam_ap_profile = WMI_ROAM_AP_PROFILE,
+ .ofl_scan_add_ap_profile = WMI_ROAM_AP_PROFILE,
+ .ofl_scan_remove_ap_profile = WMI_OFL_SCAN_REMOVE_AP_PROFILE,
+ .ofl_scan_period = WMI_OFL_SCAN_PERIOD,
+ .p2p_dev_set_device_info = WMI_P2P_DEV_SET_DEVICE_INFO,
+ .p2p_dev_set_discoverability = WMI_P2P_DEV_SET_DISCOVERABILITY,
+ .p2p_go_set_beacon_ie = WMI_P2P_GO_SET_BEACON_IE,
+ .p2p_go_set_probe_resp_ie = WMI_P2P_GO_SET_PROBE_RESP_IE,
+ .p2p_set_vendor_ie_data_cmdid = WMI_P2P_SET_VENDOR_IE_DATA_CMDID,
+ .ap_ps_peer_param_cmdid = WMI_AP_PS_PEER_PARAM_CMDID,
+ .ap_ps_peer_uapsd_coex_cmdid = WMI_AP_PS_PEER_UAPSD_COEX_CMDID,
+ .peer_rate_retry_sched_cmdid = WMI_PEER_RATE_RETRY_SCHED_CMDID,
+ .wlan_profile_trigger_cmdid = WMI_WLAN_PROFILE_TRIGGER_CMDID,
+ .wlan_profile_set_hist_intvl_cmdid =
+ WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
+ .wlan_profile_get_profile_data_cmdid =
+ WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
+ .wlan_profile_enable_profile_id_cmdid =
+ WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
+ .wlan_profile_list_profile_id_cmdid =
+ WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
+ .pdev_suspend_cmdid = WMI_PDEV_SUSPEND_CMDID,
+ .pdev_resume_cmdid = WMI_PDEV_RESUME_CMDID,
+ .add_bcn_filter_cmdid = WMI_ADD_BCN_FILTER_CMDID,
+ .rmv_bcn_filter_cmdid = WMI_RMV_BCN_FILTER_CMDID,
+ .wow_add_wake_pattern_cmdid = WMI_WOW_ADD_WAKE_PATTERN_CMDID,
+ .wow_del_wake_pattern_cmdid = WMI_WOW_DEL_WAKE_PATTERN_CMDID,
+ .wow_enable_disable_wake_event_cmdid =
+ WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
+ .wow_enable_cmdid = WMI_WOW_ENABLE_CMDID,
+ .wow_hostwakeup_from_sleep_cmdid = WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
+ .rtt_measreq_cmdid = WMI_RTT_MEASREQ_CMDID,
+ .rtt_tsf_cmdid = WMI_RTT_TSF_CMDID,
+ .vdev_spectral_scan_configure_cmdid =
+ WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
+ .vdev_spectral_scan_enable_cmdid = WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
+ .request_stats_cmdid = WMI_REQUEST_STATS_CMDID,
+ .set_arp_ns_offload_cmdid = WMI_SET_ARP_NS_OFFLOAD_CMDID,
+ .network_list_offload_config_cmdid =
+ WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID,
+ .gtk_offload_cmdid = WMI_GTK_OFFLOAD_CMDID,
+ .csa_offload_enable_cmdid = WMI_CSA_OFFLOAD_ENABLE_CMDID,
+ .csa_offload_chanswitch_cmdid = WMI_CSA_OFFLOAD_CHANSWITCH_CMDID,
+ .chatter_set_mode_cmdid = WMI_CHATTER_SET_MODE_CMDID,
+ .peer_tid_addba_cmdid = WMI_PEER_TID_ADDBA_CMDID,
+ .peer_tid_delba_cmdid = WMI_PEER_TID_DELBA_CMDID,
+ .sta_dtim_ps_method_cmdid = WMI_STA_DTIM_PS_METHOD_CMDID,
+ .sta_uapsd_auto_trig_cmdid = WMI_STA_UAPSD_AUTO_TRIG_CMDID,
+ .sta_keepalive_cmd = WMI_STA_KEEPALIVE_CMD,
+ .echo_cmdid = WMI_ECHO_CMDID,
+ .pdev_utf_cmdid = WMI_PDEV_UTF_CMDID,
+ .dbglog_cfg_cmdid = WMI_DBGLOG_CFG_CMDID,
+ .pdev_qvit_cmdid = WMI_PDEV_QVIT_CMDID,
+ .pdev_ftm_intg_cmdid = WMI_PDEV_FTM_INTG_CMDID,
+ .vdev_set_keepalive_cmdid = WMI_VDEV_SET_KEEPALIVE_CMDID,
+ .vdev_get_keepalive_cmdid = WMI_VDEV_GET_KEEPALIVE_CMDID,
+ .force_fw_hang_cmdid = WMI_FORCE_FW_HANG_CMDID,
+ .gpio_config_cmdid = WMI_GPIO_CONFIG_CMDID,
+ .gpio_output_cmdid = WMI_GPIO_OUTPUT_CMDID,
+};
+
+/* TODO: 10.X WMI cmd track */
+
int ath10k_wmi_wait_for_service_ready(struct ath10k *ar)
{
int ret;
@@ -64,7 +186,7 @@ static void ath10k_wmi_htc_tx_complete(struct ath10k *ar, struct sk_buff *skb)
}
static int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb,
- enum wmi_cmd_id cmd_id)
+ u32 cmd_id)
{
struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(skb);
struct wmi_cmd_hdr *cmd_hdr;
@@ -144,7 +266,7 @@ static void ath10k_wmi_op_ep_tx_credits(struct ath10k *ar)
}
static int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb,
- enum wmi_cmd_id cmd_id)
+ u32 cmd_id)
{
int ret = -EINVAL;
@@ -1055,7 +1177,7 @@ static int ath10k_wmi_ready_event_rx(struct ath10k *ar, struct sk_buff *skb)
return 0;
}
-static void ath10k_wmi_process_rx(struct ath10k *ar, struct sk_buff *skb)
+static void ath10k_wmi_main_process_rx(struct ath10k *ar, struct sk_buff *skb)
{
struct wmi_cmd_hdr *cmd_hdr;
enum wmi_event_id id;
@@ -1174,14 +1296,31 @@ static void ath10k_wmi_process_rx(struct ath10k *ar, struct sk_buff *skb)
dev_kfree_skb(skb);
}
+static void ath10k_wmi_process_rx(struct ath10k *ar, struct sk_buff *skb)
+{
+ if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features))
+ ath10k_warn("Firmware 10.X is not yet supported\n");
+ else
+ ath10k_wmi_main_process_rx(ar, skb);
+}
+
/* WMI Initialization functions */
int ath10k_wmi_attach(struct ath10k *ar)
{
+ int ret = 0;
+
+ if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features)) {
+ ath10k_warn("Firmware 10.X is not yet supported\n");
+ ret = -ENOTSUPP;
+ } else {
+ ar->wmi.cmd = &wmi_cmd_map;
+ }
+
init_completion(&ar->wmi.service_ready);
init_completion(&ar->wmi.unified_ready);
init_waitqueue_head(&ar->wmi.tx_credits_wq);
- return 0;
+ return ret;
}
void ath10k_wmi_detach(struct ath10k *ar)
@@ -1237,7 +1376,8 @@ int ath10k_wmi_pdev_set_regdomain(struct ath10k *ar, u16 rd, u16 rd2g,
"wmi pdev regdomain rd %x rd2g %x rd5g %x ctl2g %x ctl5g %x\n",
rd, rd2g, rd5g, ctl2g, ctl5g);
- return ath10k_wmi_cmd_send(ar, skb, WMI_PDEV_SET_REGDOMAIN_CMDID);
+ return ath10k_wmi_cmd_send(ar, skb,
+ ar->wmi.cmd->pdev_set_regdomain_cmdid);
}
int ath10k_wmi_pdev_set_channel(struct ath10k *ar,
@@ -1267,7 +1407,8 @@ int ath10k_wmi_pdev_set_channel(struct ath10k *ar,
"wmi set channel mode %d freq %d\n",
arg->mode, arg->freq);
- return ath10k_wmi_cmd_send(ar, skb, WMI_PDEV_SET_CHANNEL_CMDID);
+ return ath10k_wmi_cmd_send(ar, skb,
+ ar->wmi.cmd->pdev_set_channel_cmdid);
}
int ath10k_wmi_pdev_suspend_target(struct ath10k *ar)
@@ -1282,7 +1423,7 @@ int ath10k_wmi_pdev_suspend_target(struct ath10k *ar)
cmd = (struct wmi_pdev_suspend_cmd *)skb->data;
cmd->suspend_opt = WMI_PDEV_SUSPEND;
- return ath10k_wmi_cmd_send(ar, skb, WMI_PDEV_SUSPEND_CMDID);
+ return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->pdev_suspend_cmdid);
}
int ath10k_wmi_pdev_resume_target(struct ath10k *ar)
@@ -1293,7 +1434,7 @@ int ath10k_wmi_pdev_resume_target(struct ath10k *ar)
if (skb == NULL)
return -ENOMEM;
- return ath10k_wmi_cmd_send(ar, skb, WMI_PDEV_RESUME_CMDID);
+ return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->pdev_resume_cmdid);
}
int ath10k_wmi_pdev_set_param(struct ath10k *ar, enum wmi_pdev_param id,
@@ -1312,7 +1453,7 @@ int ath10k_wmi_pdev_set_param(struct ath10k *ar, enum wmi_pdev_param id,
ath10k_dbg(ATH10K_DBG_WMI, "wmi pdev set param %d value %d\n",
id, value);
- return ath10k_wmi_cmd_send(ar, skb, WMI_PDEV_SET_PARAM_CMDID);
+ return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->pdev_set_param_cmdid);
}
int ath10k_wmi_cmd_init(struct ath10k *ar)
@@ -1382,7 +1523,7 @@ int ath10k_wmi_cmd_init(struct ath10k *ar)
memcpy(&cmd->resource_config, &config, sizeof(config));
ath10k_dbg(ATH10K_DBG_WMI, "wmi init\n");
- return ath10k_wmi_cmd_send(ar, buf, WMI_INIT_CMDID);
+ return ath10k_wmi_cmd_send(ar, buf, ar->wmi.cmd->init_cmdid);
}
static int ath10k_wmi_start_scan_calc_len(const struct wmi_start_scan_arg *arg)
@@ -1543,7 +1684,7 @@ int ath10k_wmi_start_scan(struct ath10k *ar,
}
ath10k_dbg(ATH10K_DBG_WMI, "wmi start scan\n");
- return ath10k_wmi_cmd_send(ar, skb, WMI_START_SCAN_CMDID);
+ return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->start_scan_cmdid);
}
void ath10k_wmi_start_scan_init(struct ath10k *ar,
@@ -1603,7 +1744,7 @@ int ath10k_wmi_stop_scan(struct ath10k *ar, const struct wmi_stop_scan_arg *arg)
ath10k_dbg(ATH10K_DBG_WMI,
"wmi stop scan reqid %d req_type %d vdev/scan_id %d\n",
arg->req_id, arg->req_type, arg->u.scan_id);
- return ath10k_wmi_cmd_send(ar, skb, WMI_STOP_SCAN_CMDID);
+ return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->stop_scan_cmdid);
}
int ath10k_wmi_vdev_create(struct ath10k *ar, u32 vdev_id,
@@ -1628,7 +1769,7 @@ int ath10k_wmi_vdev_create(struct ath10k *ar, u32 vdev_id,
"WMI vdev create: id %d type %d subtype %d macaddr %pM\n",
vdev_id, type, subtype, macaddr);
- return ath10k_wmi_cmd_send(ar, skb, WMI_VDEV_CREATE_CMDID);
+ return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->vdev_create_cmdid);
}
int ath10k_wmi_vdev_delete(struct ath10k *ar, u32 vdev_id)
@@ -1646,20 +1787,20 @@ int ath10k_wmi_vdev_delete(struct ath10k *ar, u32 vdev_id)
ath10k_dbg(ATH10K_DBG_WMI,
"WMI vdev delete id %d\n", vdev_id);
- return ath10k_wmi_cmd_send(ar, skb, WMI_VDEV_DELETE_CMDID);
+ return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->vdev_delete_cmdid);
}
static int ath10k_wmi_vdev_start_restart(struct ath10k *ar,
const struct wmi_vdev_start_request_arg *arg,
- enum wmi_cmd_id cmd_id)
+ u32 cmd_id)
{
struct wmi_vdev_start_request_cmd *cmd;
struct sk_buff *skb;
const char *cmdname;
u32 flags = 0;
- if (cmd_id != WMI_VDEV_START_REQUEST_CMDID &&
- cmd_id != WMI_VDEV_RESTART_REQUEST_CMDID)
+ if (cmd_id != ar->wmi.cmd->vdev_start_request_cmdid &&
+ cmd_id != ar->wmi.cmd->vdev_restart_request_cmdid)
return -EINVAL;
if (WARN_ON(arg->ssid && arg->ssid_len == 0))
return -EINVAL;
@@ -1668,9 +1809,9 @@ static int ath10k_wmi_vdev_start_restart(struct ath10k *ar,
if (WARN_ON(arg->ssid_len > sizeof(cmd->ssid.ssid)))
return -EINVAL;
- if (cmd_id == WMI_VDEV_START_REQUEST_CMDID)
+ if (cmd_id == ar->wmi.cmd->vdev_start_request_cmdid)
cmdname = "start";
- else if (cmd_id == WMI_VDEV_RESTART_REQUEST_CMDID)
+ else if (cmd_id == ar->wmi.cmd->vdev_restart_request_cmdid)
cmdname = "restart";
else
return -EINVAL; /* should not happen, we already check cmd_id */
@@ -1721,15 +1862,17 @@ static int ath10k_wmi_vdev_start_restart(struct ath10k *ar,
int ath10k_wmi_vdev_start(struct ath10k *ar,
const struct wmi_vdev_start_request_arg *arg)
{
- return ath10k_wmi_vdev_start_restart(ar, arg,
- WMI_VDEV_START_REQUEST_CMDID);
+ u32 cmd_id = ar->wmi.cmd->vdev_start_request_cmdid;
+
+ return ath10k_wmi_vdev_start_restart(ar, arg, cmd_id);
}
int ath10k_wmi_vdev_restart(struct ath10k *ar,
const struct wmi_vdev_start_request_arg *arg)
{
- return ath10k_wmi_vdev_start_restart(ar, arg,
- WMI_VDEV_RESTART_REQUEST_CMDID);
+ u32 cmd_id = ar->wmi.cmd->vdev_restart_request_cmdid;
+
+ return ath10k_wmi_vdev_start_restart(ar, arg, cmd_id);
}
int ath10k_wmi_vdev_stop(struct ath10k *ar, u32 vdev_id)
@@ -1746,7 +1889,7 @@ int ath10k_wmi_vdev_stop(struct ath10k *ar, u32 vdev_id)
ath10k_dbg(ATH10K_DBG_WMI, "wmi vdev stop id 0x%x\n", vdev_id);
- return ath10k_wmi_cmd_send(ar, skb, WMI_VDEV_STOP_CMDID);
+ return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->vdev_stop_cmdid);
}
int ath10k_wmi_vdev_up(struct ath10k *ar, u32 vdev_id, u32 aid, const u8 *bssid)
@@ -1767,7 +1910,7 @@ int ath10k_wmi_vdev_up(struct ath10k *ar, u32 vdev_id, u32 aid, const u8 *bssid)
"wmi mgmt vdev up id 0x%x assoc id %d bssid %pM\n",
vdev_id, aid, bssid);
- return ath10k_wmi_cmd_send(ar, skb, WMI_VDEV_UP_CMDID);
+ return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->vdev_up_cmdid);
}
int ath10k_wmi_vdev_down(struct ath10k *ar, u32 vdev_id)
@@ -1785,7 +1928,7 @@ int ath10k_wmi_vdev_down(struct ath10k *ar, u32 vdev_id)
ath10k_dbg(ATH10K_DBG_WMI,
"wmi mgmt vdev down id 0x%x\n", vdev_id);
- return ath10k_wmi_cmd_send(ar, skb, WMI_VDEV_DOWN_CMDID);
+ return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->vdev_down_cmdid);
}
int ath10k_wmi_vdev_set_param(struct ath10k *ar, u32 vdev_id,
@@ -1807,7 +1950,7 @@ int ath10k_wmi_vdev_set_param(struct ath10k *ar, u32 vdev_id,
"wmi vdev id 0x%x set param %d value %d\n",
vdev_id, param_id, param_value);
- return ath10k_wmi_cmd_send(ar, skb, WMI_VDEV_SET_PARAM_CMDID);
+ return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->vdev_set_param_cmdid);
}
int ath10k_wmi_vdev_install_key(struct ath10k *ar,
@@ -1842,7 +1985,8 @@ int ath10k_wmi_vdev_install_key(struct ath10k *ar,
ath10k_dbg(ATH10K_DBG_WMI,
"wmi vdev install key idx %d cipher %d len %d\n",
arg->key_idx, arg->key_cipher, arg->key_len);
- return ath10k_wmi_cmd_send(ar, skb, WMI_VDEV_INSTALL_KEY_CMDID);
+ return ath10k_wmi_cmd_send(ar, skb,
+ ar->wmi.cmd->vdev_install_key_cmdid);
}
int ath10k_wmi_peer_create(struct ath10k *ar, u32 vdev_id,
@@ -1862,7 +2006,7 @@ int ath10k_wmi_peer_create(struct ath10k *ar, u32 vdev_id,
ath10k_dbg(ATH10K_DBG_WMI,
"wmi peer create vdev_id %d peer_addr %pM\n",
vdev_id, peer_addr);
- return ath10k_wmi_cmd_send(ar, skb, WMI_PEER_CREATE_CMDID);
+ return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->peer_create_cmdid);
}
int ath10k_wmi_peer_delete(struct ath10k *ar, u32 vdev_id,
@@ -1882,7 +2026,7 @@ int ath10k_wmi_peer_delete(struct ath10k *ar, u32 vdev_id,
ath10k_dbg(ATH10K_DBG_WMI,
"wmi peer delete vdev_id %d peer_addr %pM\n",
vdev_id, peer_addr);
- return ath10k_wmi_cmd_send(ar, skb, WMI_PEER_DELETE_CMDID);
+ return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->peer_delete_cmdid);
}
int ath10k_wmi_peer_flush(struct ath10k *ar, u32 vdev_id,
@@ -1903,7 +2047,7 @@ int ath10k_wmi_peer_flush(struct ath10k *ar, u32 vdev_id,
ath10k_dbg(ATH10K_DBG_WMI,
"wmi peer flush vdev_id %d peer_addr %pM tids %08x\n",
vdev_id, peer_addr, tid_bitmap);
- return ath10k_wmi_cmd_send(ar, skb, WMI_PEER_FLUSH_TIDS_CMDID);
+ return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->peer_flush_tids_cmdid);
}
int ath10k_wmi_peer_set_param(struct ath10k *ar, u32 vdev_id,
@@ -1927,7 +2071,7 @@ int ath10k_wmi_peer_set_param(struct ath10k *ar, u32 vdev_id,
"wmi vdev %d peer 0x%pM set param %d value %d\n",
vdev_id, peer_addr, param_id, param_value);
- return ath10k_wmi_cmd_send(ar, skb, WMI_PEER_SET_PARAM_CMDID);
+ return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->peer_set_param_cmdid);
}
int ath10k_wmi_set_psmode(struct ath10k *ar, u32 vdev_id,
@@ -1948,7 +2092,8 @@ int ath10k_wmi_set_psmode(struct ath10k *ar, u32 vdev_id,
"wmi set powersave id 0x%x mode %d\n",
vdev_id, psmode);
- return ath10k_wmi_cmd_send(ar, skb, WMI_STA_POWERSAVE_MODE_CMDID);
+ return ath10k_wmi_cmd_send(ar, skb,
+ ar->wmi.cmd->sta_powersave_mode_cmdid);
}
int ath10k_wmi_set_sta_ps_param(struct ath10k *ar, u32 vdev_id,
@@ -1970,7 +2115,8 @@ int ath10k_wmi_set_sta_ps_param(struct ath10k *ar, u32 vdev_id,
ath10k_dbg(ATH10K_DBG_WMI,
"wmi sta ps param vdev_id 0x%x param %d value %d\n",
vdev_id, param_id, value);
- return ath10k_wmi_cmd_send(ar, skb, WMI_STA_POWERSAVE_PARAM_CMDID);
+ return ath10k_wmi_cmd_send(ar, skb,
+ ar->wmi.cmd->sta_powersave_param_cmdid);
}
int ath10k_wmi_set_ap_ps_param(struct ath10k *ar, u32 vdev_id, const u8 *mac,
@@ -1996,7 +2142,8 @@ int ath10k_wmi_set_ap_ps_param(struct ath10k *ar, u32 vdev_id, const u8 *mac,
"wmi ap ps param vdev_id 0x%X param %d value %d mac_addr %pM\n",
vdev_id, param_id, value, mac);
- return ath10k_wmi_cmd_send(ar, skb, WMI_AP_PS_PEER_PARAM_CMDID);
+ return ath10k_wmi_cmd_send(ar, skb,
+ ar->wmi.cmd->ap_ps_peer_param_cmdid);
}
int ath10k_wmi_scan_chan_list(struct ath10k *ar,
@@ -2049,7 +2196,7 @@ int ath10k_wmi_scan_chan_list(struct ath10k *ar,
ci->flags |= __cpu_to_le32(flags);
}
- return ath10k_wmi_cmd_send(ar, skb, WMI_SCAN_CHAN_LIST_CMDID);
+ return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->scan_chan_list_cmdid);
}
int ath10k_wmi_peer_assoc(struct ath10k *ar,
@@ -2108,7 +2255,7 @@ int ath10k_wmi_peer_assoc(struct ath10k *ar,
ath10k_dbg(ATH10K_DBG_WMI,
"wmi peer assoc vdev %d addr %pM\n",
arg->vdev_id, arg->addr);
- return ath10k_wmi_cmd_send(ar, skb, WMI_PEER_ASSOC_CMDID);
+ return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->peer_assoc_cmdid);
}
int ath10k_wmi_beacon_send_nowait(struct ath10k *ar,
@@ -2128,7 +2275,7 @@ int ath10k_wmi_beacon_send_nowait(struct ath10k *ar,
cmd->hdr.bcn_len = __cpu_to_le32(arg->bcn_len);
memcpy(cmd->bcn, arg->bcn, arg->bcn_len);
- return ath10k_wmi_cmd_send_nowait(ar, skb, WMI_BCN_TX_CMDID);
+ return ath10k_wmi_cmd_send_nowait(ar, skb, ar->wmi.cmd->bcn_tx_cmdid);
}
static void ath10k_wmi_pdev_set_wmm_param(struct wmi_wmm_params *params,
@@ -2159,7 +2306,8 @@ int ath10k_wmi_pdev_set_wmm_params(struct ath10k *ar,
ath10k_wmi_pdev_set_wmm_param(&cmd->ac_vo, &arg->ac_vo);
ath10k_dbg(ATH10K_DBG_WMI, "wmi pdev set wmm params\n");
- return ath10k_wmi_cmd_send(ar, skb, WMI_PDEV_SET_WMM_PARAMS_CMDID);
+ return ath10k_wmi_cmd_send(ar, skb,
+ ar->wmi.cmd->pdev_set_wmm_params_cmdid);
}
int ath10k_wmi_request_stats(struct ath10k *ar, enum wmi_stats_id stats_id)
@@ -2175,7 +2323,7 @@ int ath10k_wmi_request_stats(struct ath10k *ar, enum wmi_stats_id stats_id)
cmd->stats_id = __cpu_to_le32(stats_id);
ath10k_dbg(ATH10K_DBG_WMI, "wmi request stats %d\n", (int)stats_id);
- return ath10k_wmi_cmd_send(ar, skb, WMI_REQUEST_STATS_CMDID);
+ return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->request_stats_cmdid);
}
int ath10k_wmi_force_fw_hang(struct ath10k *ar,
@@ -2194,5 +2342,5 @@ int ath10k_wmi_force_fw_hang(struct ath10k *ar,
ath10k_dbg(ATH10K_DBG_WMI, "wmi force fw hang %d delay %d\n",
type, delay_ms);
- return ath10k_wmi_cmd_send(ar, skb, WMI_FORCE_FW_HANG_CMDID);
+ return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->force_fw_hang_cmdid);
}
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 2c52c23..b8b446a 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -208,6 +208,118 @@ struct wmi_mac_addr {
(c_macaddr)[5] = (((pwmi_mac_addr)->word1) >> 8) & 0xff; \
} while (0)
+struct wmi_cmd_map {
+ u32 init_cmdid;
+ u32 start_scan_cmdid;
+ u32 stop_scan_cmdid;
+ u32 scan_chan_list_cmdid;
+ u32 scan_sch_prio_tbl_cmdid;
+ u32 pdev_set_regdomain_cmdid;
+ u32 pdev_set_channel_cmdid;
+ u32 pdev_set_param_cmdid;
+ u32 pdev_pktlog_enable_cmdid;
+ u32 pdev_pktlog_disable_cmdid;
+ u32 pdev_set_wmm_params_cmdid;
+ u32 pdev_set_ht_cap_ie_cmdid;
+ u32 pdev_set_vht_cap_ie_cmdid;
+ u32 pdev_set_dscp_tid_map_cmdid;
+ u32 pdev_set_quiet_mode_cmdid;
+ u32 pdev_green_ap_ps_enable_cmdid;
+ u32 pdev_get_tpc_config_cmdid;
+ u32 pdev_set_base_macaddr_cmdid;
+ u32 vdev_create_cmdid;
+ u32 vdev_delete_cmdid;
+ u32 vdev_start_request_cmdid;
+ u32 vdev_restart_request_cmdid;
+ u32 vdev_up_cmdid;
+ u32 vdev_stop_cmdid;
+ u32 vdev_down_cmdid;
+ u32 vdev_set_param_cmdid;
+ u32 vdev_install_key_cmdid;
+ u32 peer_create_cmdid;
+ u32 peer_delete_cmdid;
+ u32 peer_flush_tids_cmdid;
+ u32 peer_set_param_cmdid;
+ u32 peer_assoc_cmdid;
+ u32 peer_add_wds_entry_cmdid;
+ u32 peer_remove_wds_entry_cmdid;
+ u32 peer_mcast_group_cmdid;
+ u32 bcn_tx_cmdid;
+ u32 pdev_send_bcn_cmdid;
+ u32 bcn_tmpl_cmdid;
+ u32 bcn_filter_rx_cmdid;
+ u32 prb_req_filter_rx_cmdid;
+ u32 mgmt_tx_cmdid;
+ u32 prb_tmpl_cmdid;
+ u32 addba_clear_resp_cmdid;
+ u32 addba_send_cmdid;
+ u32 addba_status_cmdid;
+ u32 delba_send_cmdid;
+ u32 addba_set_resp_cmdid;
+ u32 send_singleamsdu_cmdid;
+ u32 sta_powersave_mode_cmdid;
+ u32 sta_powersave_param_cmdid;
+ u32 sta_mimo_ps_mode_cmdid;
+ u32 pdev_dfs_enable_cmdid;
+ u32 pdev_dfs_disable_cmdid;
+ u32 roam_scan_mode;
+ u32 roam_scan_rssi_threshold;
+ u32 roam_scan_period;
+ u32 roam_scan_rssi_change_threshold;
+ u32 roam_ap_profile;
+ u32 ofl_scan_add_ap_profile;
+ u32 ofl_scan_remove_ap_profile;
+ u32 ofl_scan_period;
+ u32 p2p_dev_set_device_info;
+ u32 p2p_dev_set_discoverability;
+ u32 p2p_go_set_beacon_ie;
+ u32 p2p_go_set_probe_resp_ie;
+ u32 p2p_set_vendor_ie_data_cmdid;
+ u32 ap_ps_peer_param_cmdid;
+ u32 ap_ps_peer_uapsd_coex_cmdid;
+ u32 peer_rate_retry_sched_cmdid;
+ u32 wlan_profile_trigger_cmdid;
+ u32 wlan_profile_set_hist_intvl_cmdid;
+ u32 wlan_profile_get_profile_data_cmdid;
+ u32 wlan_profile_enable_profile_id_cmdid;
+ u32 wlan_profile_list_profile_id_cmdid;
+ u32 pdev_suspend_cmdid;
+ u32 pdev_resume_cmdid;
+ u32 add_bcn_filter_cmdid;
+ u32 rmv_bcn_filter_cmdid;
+ u32 wow_add_wake_pattern_cmdid;
+ u32 wow_del_wake_pattern_cmdid;
+ u32 wow_enable_disable_wake_event_cmdid;
+ u32 wow_enable_cmdid;
+ u32 wow_hostwakeup_from_sleep_cmdid;
+ u32 rtt_measreq_cmdid;
+ u32 rtt_tsf_cmdid;
+ u32 vdev_spectral_scan_configure_cmdid;
+ u32 vdev_spectral_scan_enable_cmdid;
+ u32 request_stats_cmdid;
+ u32 set_arp_ns_offload_cmdid;
+ u32 network_list_offload_config_cmdid;
+ u32 gtk_offload_cmdid;
+ u32 csa_offload_enable_cmdid;
+ u32 csa_offload_chanswitch_cmdid;
+ u32 chatter_set_mode_cmdid;
+ u32 peer_tid_addba_cmdid;
+ u32 peer_tid_delba_cmdid;
+ u32 sta_dtim_ps_method_cmdid;
+ u32 sta_uapsd_auto_trig_cmdid;
+ u32 sta_keepalive_cmd;
+ u32 echo_cmdid;
+ u32 pdev_utf_cmdid;
+ u32 dbglog_cfg_cmdid;
+ u32 pdev_qvit_cmdid;
+ u32 pdev_ftm_intg_cmdid;
+ u32 vdev_set_keepalive_cmdid;
+ u32 vdev_get_keepalive_cmdid;
+ u32 force_fw_hang_cmdid;
+ u32 gpio_config_cmdid;
+ u32 gpio_output_cmdid;
+};
+
/*
* wmi command groups.
*/
--
1.7.10
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v2 02/13] ath10k: add wmi_10x_<cmd/event> definitions
2013-09-26 9:29 [PATCH v2 00/13] ath10k: dual-firmware support (MAIN and 10.X) Bartosz Markowski
2013-09-26 9:29 ` [PATCH v2 01/13] ath10k: introduce dynamic WMI structures Bartosz Markowski
@ 2013-09-26 9:29 ` Bartosz Markowski
2013-09-26 9:29 ` [PATCH v2 03/13] ath10k: warn if give WMI command is not supported Bartosz Markowski
` (11 subsequent siblings)
13 siblings, 0 replies; 17+ messages in thread
From: Bartosz Markowski @ 2013-09-26 9:29 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Bartosz Markowski
Introduce the cmd and events definitions for 10.X FW API
and make up the wmi_10x_cmd_map. This is the core of
host-firmware WMI interface for 10.X FW branch.
Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
---
drivers/net/wireless/ath/ath10k/wmi.c | 126 ++++++++++++++++++-
drivers/net/wireless/ath/ath10k/wmi.h | 215 ++++++++++++++++++++++++++++++++-
2 files changed, 338 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 1296dbe..cfb2082 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -143,7 +143,127 @@ static struct wmi_cmd_map wmi_cmd_map = {
.gpio_output_cmdid = WMI_GPIO_OUTPUT_CMDID,
};
-/* TODO: 10.X WMI cmd track */
+/* 10.X WMI cmd track */
+static struct wmi_cmd_map wmi_10x_cmd_map = {
+ .init_cmdid = WMI_10X_INIT_CMDID,
+ .start_scan_cmdid = WMI_10X_START_SCAN_CMDID,
+ .stop_scan_cmdid = WMI_10X_STOP_SCAN_CMDID,
+ .scan_chan_list_cmdid = WMI_10X_SCAN_CHAN_LIST_CMDID,
+ .scan_sch_prio_tbl_cmdid = WMI_CMD_UNDEFINED,
+ .pdev_set_regdomain_cmdid = WMI_10X_PDEV_SET_REGDOMAIN_CMDID,
+ .pdev_set_channel_cmdid = WMI_10X_PDEV_SET_CHANNEL_CMDID,
+ .pdev_set_param_cmdid = WMI_10X_PDEV_SET_PARAM_CMDID,
+ .pdev_pktlog_enable_cmdid = WMI_10X_PDEV_PKTLOG_ENABLE_CMDID,
+ .pdev_pktlog_disable_cmdid = WMI_10X_PDEV_PKTLOG_DISABLE_CMDID,
+ .pdev_set_wmm_params_cmdid = WMI_10X_PDEV_SET_WMM_PARAMS_CMDID,
+ .pdev_set_ht_cap_ie_cmdid = WMI_10X_PDEV_SET_HT_CAP_IE_CMDID,
+ .pdev_set_vht_cap_ie_cmdid = WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID,
+ .pdev_set_dscp_tid_map_cmdid = WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID,
+ .pdev_set_quiet_mode_cmdid = WMI_10X_PDEV_SET_QUIET_MODE_CMDID,
+ .pdev_green_ap_ps_enable_cmdid = WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID,
+ .pdev_get_tpc_config_cmdid = WMI_10X_PDEV_GET_TPC_CONFIG_CMDID,
+ .pdev_set_base_macaddr_cmdid = WMI_10X_PDEV_SET_BASE_MACADDR_CMDID,
+ .vdev_create_cmdid = WMI_10X_VDEV_CREATE_CMDID,
+ .vdev_delete_cmdid = WMI_10X_VDEV_DELETE_CMDID,
+ .vdev_start_request_cmdid = WMI_10X_VDEV_START_REQUEST_CMDID,
+ .vdev_restart_request_cmdid = WMI_10X_VDEV_RESTART_REQUEST_CMDID,
+ .vdev_up_cmdid = WMI_10X_VDEV_UP_CMDID,
+ .vdev_stop_cmdid = WMI_10X_VDEV_STOP_CMDID,
+ .vdev_down_cmdid = WMI_10X_VDEV_DOWN_CMDID,
+ .vdev_set_param_cmdid = WMI_10X_VDEV_SET_PARAM_CMDID,
+ .vdev_install_key_cmdid = WMI_10X_VDEV_INSTALL_KEY_CMDID,
+ .peer_create_cmdid = WMI_10X_PEER_CREATE_CMDID,
+ .peer_delete_cmdid = WMI_10X_PEER_DELETE_CMDID,
+ .peer_flush_tids_cmdid = WMI_10X_PEER_FLUSH_TIDS_CMDID,
+ .peer_set_param_cmdid = WMI_10X_PEER_SET_PARAM_CMDID,
+ .peer_assoc_cmdid = WMI_10X_PEER_ASSOC_CMDID,
+ .peer_add_wds_entry_cmdid = WMI_10X_PEER_ADD_WDS_ENTRY_CMDID,
+ .peer_remove_wds_entry_cmdid = WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID,
+ .peer_mcast_group_cmdid = WMI_10X_PEER_MCAST_GROUP_CMDID,
+ .bcn_tx_cmdid = WMI_10X_BCN_TX_CMDID,
+ .pdev_send_bcn_cmdid = WMI_10X_PDEV_SEND_BCN_CMDID,
+ .bcn_tmpl_cmdid = WMI_CMD_UNDEFINED,
+ .bcn_filter_rx_cmdid = WMI_10X_BCN_FILTER_RX_CMDID,
+ .prb_req_filter_rx_cmdid = WMI_10X_PRB_REQ_FILTER_RX_CMDID,
+ .mgmt_tx_cmdid = WMI_10X_MGMT_TX_CMDID,
+ .prb_tmpl_cmdid = WMI_CMD_UNDEFINED,
+ .addba_clear_resp_cmdid = WMI_10X_ADDBA_CLEAR_RESP_CMDID,
+ .addba_send_cmdid = WMI_10X_ADDBA_SEND_CMDID,
+ .addba_status_cmdid = WMI_10X_ADDBA_STATUS_CMDID,
+ .delba_send_cmdid = WMI_10X_DELBA_SEND_CMDID,
+ .addba_set_resp_cmdid = WMI_10X_ADDBA_SET_RESP_CMDID,
+ .send_singleamsdu_cmdid = WMI_10X_SEND_SINGLEAMSDU_CMDID,
+ .sta_powersave_mode_cmdid = WMI_10X_STA_POWERSAVE_MODE_CMDID,
+ .sta_powersave_param_cmdid = WMI_10X_STA_POWERSAVE_PARAM_CMDID,
+ .sta_mimo_ps_mode_cmdid = WMI_10X_STA_MIMO_PS_MODE_CMDID,
+ .pdev_dfs_enable_cmdid = WMI_10X_PDEV_DFS_ENABLE_CMDID,
+ .pdev_dfs_disable_cmdid = WMI_10X_PDEV_DFS_DISABLE_CMDID,
+ .roam_scan_mode = WMI_10X_ROAM_SCAN_MODE,
+ .roam_scan_rssi_threshold = WMI_10X_ROAM_SCAN_RSSI_THRESHOLD,
+ .roam_scan_period = WMI_10X_ROAM_SCAN_PERIOD,
+ .roam_scan_rssi_change_threshold =
+ WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
+ .roam_ap_profile = WMI_10X_ROAM_AP_PROFILE,
+ .ofl_scan_add_ap_profile = WMI_10X_OFL_SCAN_ADD_AP_PROFILE,
+ .ofl_scan_remove_ap_profile = WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE,
+ .ofl_scan_period = WMI_10X_OFL_SCAN_PERIOD,
+ .p2p_dev_set_device_info = WMI_10X_P2P_DEV_SET_DEVICE_INFO,
+ .p2p_dev_set_discoverability = WMI_10X_P2P_DEV_SET_DISCOVERABILITY,
+ .p2p_go_set_beacon_ie = WMI_10X_P2P_GO_SET_BEACON_IE,
+ .p2p_go_set_probe_resp_ie = WMI_10X_P2P_GO_SET_PROBE_RESP_IE,
+ .p2p_set_vendor_ie_data_cmdid = WMI_CMD_UNDEFINED,
+ .ap_ps_peer_param_cmdid = WMI_CMD_UNDEFINED,
+ .ap_ps_peer_uapsd_coex_cmdid = WMI_CMD_UNDEFINED,
+ .peer_rate_retry_sched_cmdid = WMI_10X_PEER_RATE_RETRY_SCHED_CMDID,
+ .wlan_profile_trigger_cmdid = WMI_10X_WLAN_PROFILE_TRIGGER_CMDID,
+ .wlan_profile_set_hist_intvl_cmdid =
+ WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
+ .wlan_profile_get_profile_data_cmdid =
+ WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
+ .wlan_profile_enable_profile_id_cmdid =
+ WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
+ .wlan_profile_list_profile_id_cmdid =
+ WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
+ .pdev_suspend_cmdid = WMI_10X_PDEV_SUSPEND_CMDID,
+ .pdev_resume_cmdid = WMI_10X_PDEV_RESUME_CMDID,
+ .add_bcn_filter_cmdid = WMI_10X_ADD_BCN_FILTER_CMDID,
+ .rmv_bcn_filter_cmdid = WMI_10X_RMV_BCN_FILTER_CMDID,
+ .wow_add_wake_pattern_cmdid = WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID,
+ .wow_del_wake_pattern_cmdid = WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID,
+ .wow_enable_disable_wake_event_cmdid =
+ WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
+ .wow_enable_cmdid = WMI_10X_WOW_ENABLE_CMDID,
+ .wow_hostwakeup_from_sleep_cmdid =
+ WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
+ .rtt_measreq_cmdid = WMI_10X_RTT_MEASREQ_CMDID,
+ .rtt_tsf_cmdid = WMI_10X_RTT_TSF_CMDID,
+ .vdev_spectral_scan_configure_cmdid =
+ WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
+ .vdev_spectral_scan_enable_cmdid =
+ WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
+ .request_stats_cmdid = WMI_10X_REQUEST_STATS_CMDID,
+ .set_arp_ns_offload_cmdid = WMI_CMD_UNDEFINED,
+ .network_list_offload_config_cmdid = WMI_CMD_UNDEFINED,
+ .gtk_offload_cmdid = WMI_CMD_UNDEFINED,
+ .csa_offload_enable_cmdid = WMI_CMD_UNDEFINED,
+ .csa_offload_chanswitch_cmdid = WMI_CMD_UNDEFINED,
+ .chatter_set_mode_cmdid = WMI_CMD_UNDEFINED,
+ .peer_tid_addba_cmdid = WMI_CMD_UNDEFINED,
+ .peer_tid_delba_cmdid = WMI_CMD_UNDEFINED,
+ .sta_dtim_ps_method_cmdid = WMI_CMD_UNDEFINED,
+ .sta_uapsd_auto_trig_cmdid = WMI_CMD_UNDEFINED,
+ .sta_keepalive_cmd = WMI_CMD_UNDEFINED,
+ .echo_cmdid = WMI_10X_ECHO_CMDID,
+ .pdev_utf_cmdid = WMI_10X_PDEV_UTF_CMDID,
+ .dbglog_cfg_cmdid = WMI_10X_DBGLOG_CFG_CMDID,
+ .pdev_qvit_cmdid = WMI_10X_PDEV_QVIT_CMDID,
+ .pdev_ftm_intg_cmdid = WMI_CMD_UNDEFINED,
+ .vdev_set_keepalive_cmdid = WMI_CMD_UNDEFINED,
+ .vdev_get_keepalive_cmdid = WMI_CMD_UNDEFINED,
+ .force_fw_hang_cmdid = WMI_CMD_UNDEFINED,
+ .gpio_config_cmdid = WMI_10X_GPIO_CONFIG_CMDID,
+ .gpio_output_cmdid = WMI_10X_GPIO_OUTPUT_CMDID,
+};
int ath10k_wmi_wait_for_service_ready(struct ath10k *ar)
{
@@ -1307,13 +1427,15 @@ static void ath10k_wmi_process_rx(struct ath10k *ar, struct sk_buff *skb)
/* WMI Initialization functions */
int ath10k_wmi_attach(struct ath10k *ar)
{
- int ret = 0;
+ int ret;
if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features)) {
ath10k_warn("Firmware 10.X is not yet supported\n");
+ ar->wmi.cmd = &wmi_10x_cmd_map;
ret = -ENOTSUPP;
} else {
ar->wmi.cmd = &wmi_cmd_map;
+ ret = 0;
}
init_completion(&ar->wmi.service_ready);
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index b8b446a..d8414ab 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -359,7 +359,9 @@ enum wmi_cmd_group {
#define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1)
#define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1)
-/* Command IDs and commande events. */
+#define WMI_CMD_UNDEFINED 0
+
+/* Command IDs and command events for MAIN FW. */
enum wmi_cmd_id {
WMI_INIT_CMDID = 0x1,
@@ -600,6 +602,217 @@ enum wmi_event_id {
WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO),
};
+/* Command IDs and command events for 10.X firmware */
+enum wmi_10x_cmd_id {
+ WMI_10X_START_CMDID = 0x9000,
+ WMI_10X_END_CMDID = 0x9FFF,
+
+ /* initialize the wlan sub system */
+ WMI_10X_INIT_CMDID,
+
+ /* Scan specific commands */
+
+ WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID,
+ WMI_10X_STOP_SCAN_CMDID,
+ WMI_10X_SCAN_CHAN_LIST_CMDID,
+ WMI_10X_ECHO_CMDID,
+
+ /* PDEV(physical device) specific commands */
+ WMI_10X_PDEV_SET_REGDOMAIN_CMDID,
+ WMI_10X_PDEV_SET_CHANNEL_CMDID,
+ WMI_10X_PDEV_SET_PARAM_CMDID,
+ WMI_10X_PDEV_PKTLOG_ENABLE_CMDID,
+ WMI_10X_PDEV_PKTLOG_DISABLE_CMDID,
+ WMI_10X_PDEV_SET_WMM_PARAMS_CMDID,
+ WMI_10X_PDEV_SET_HT_CAP_IE_CMDID,
+ WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID,
+ WMI_10X_PDEV_SET_BASE_MACADDR_CMDID,
+ WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID,
+ WMI_10X_PDEV_SET_QUIET_MODE_CMDID,
+ WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID,
+ WMI_10X_PDEV_GET_TPC_CONFIG_CMDID,
+
+ /* VDEV(virtual device) specific commands */
+ WMI_10X_VDEV_CREATE_CMDID,
+ WMI_10X_VDEV_DELETE_CMDID,
+ WMI_10X_VDEV_START_REQUEST_CMDID,
+ WMI_10X_VDEV_RESTART_REQUEST_CMDID,
+ WMI_10X_VDEV_UP_CMDID,
+ WMI_10X_VDEV_STOP_CMDID,
+ WMI_10X_VDEV_DOWN_CMDID,
+ WMI_10X_VDEV_STANDBY_RESPONSE_CMDID,
+ WMI_10X_VDEV_RESUME_RESPONSE_CMDID,
+ WMI_10X_VDEV_SET_PARAM_CMDID,
+ WMI_10X_VDEV_INSTALL_KEY_CMDID,
+
+ /* peer specific commands */
+ WMI_10X_PEER_CREATE_CMDID,
+ WMI_10X_PEER_DELETE_CMDID,
+ WMI_10X_PEER_FLUSH_TIDS_CMDID,
+ WMI_10X_PEER_SET_PARAM_CMDID,
+ WMI_10X_PEER_ASSOC_CMDID,
+ WMI_10X_PEER_ADD_WDS_ENTRY_CMDID,
+ WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID,
+ WMI_10X_PEER_MCAST_GROUP_CMDID,
+
+ /* beacon/management specific commands */
+
+ WMI_10X_BCN_TX_CMDID,
+ WMI_10X_BCN_PRB_TMPL_CMDID,
+ WMI_10X_BCN_FILTER_RX_CMDID,
+ WMI_10X_PRB_REQ_FILTER_RX_CMDID,
+ WMI_10X_MGMT_TX_CMDID,
+
+ /* commands to directly control ba negotiation directly from host. */
+ WMI_10X_ADDBA_CLEAR_RESP_CMDID,
+ WMI_10X_ADDBA_SEND_CMDID,
+ WMI_10X_ADDBA_STATUS_CMDID,
+ WMI_10X_DELBA_SEND_CMDID,
+ WMI_10X_ADDBA_SET_RESP_CMDID,
+ WMI_10X_SEND_SINGLEAMSDU_CMDID,
+
+ /* Station power save specific config */
+ WMI_10X_STA_POWERSAVE_MODE_CMDID,
+ WMI_10X_STA_POWERSAVE_PARAM_CMDID,
+ WMI_10X_STA_MIMO_PS_MODE_CMDID,
+
+ /* set debug log config */
+ WMI_10X_DBGLOG_CFG_CMDID,
+
+ /* DFS-specific commands */
+ WMI_10X_PDEV_DFS_ENABLE_CMDID,
+ WMI_10X_PDEV_DFS_DISABLE_CMDID,
+
+ /* QVIT specific command id */
+ WMI_10X_PDEV_QVIT_CMDID,
+
+ /* Offload Scan and Roaming related commands */
+ WMI_10X_ROAM_SCAN_MODE,
+ WMI_10X_ROAM_SCAN_RSSI_THRESHOLD,
+ WMI_10X_ROAM_SCAN_PERIOD,
+ WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
+ WMI_10X_ROAM_AP_PROFILE,
+ WMI_10X_OFL_SCAN_ADD_AP_PROFILE,
+ WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE,
+ WMI_10X_OFL_SCAN_PERIOD,
+
+ /* P2P specific commands */
+ WMI_10X_P2P_DEV_SET_DEVICE_INFO,
+ WMI_10X_P2P_DEV_SET_DISCOVERABILITY,
+ WMI_10X_P2P_GO_SET_BEACON_IE,
+ WMI_10X_P2P_GO_SET_PROBE_RESP_IE,
+
+ /* AP power save specific config */
+ WMI_10X_AP_PS_PEER_PARAM_CMDID,
+ WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID,
+
+ /* Rate-control specific commands */
+ WMI_10X_PEER_RATE_RETRY_SCHED_CMDID,
+
+ /* WLAN Profiling commands. */
+ WMI_10X_WLAN_PROFILE_TRIGGER_CMDID,
+ WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
+ WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
+ WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
+ WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
+
+ /* Suspend resume command Ids */
+ WMI_10X_PDEV_SUSPEND_CMDID,
+ WMI_10X_PDEV_RESUME_CMDID,
+
+ /* Beacon filter commands */
+ WMI_10X_ADD_BCN_FILTER_CMDID,
+ WMI_10X_RMV_BCN_FILTER_CMDID,
+
+ /* WOW Specific WMI commands*/
+ WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID,
+ WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID,
+ WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
+ WMI_10X_WOW_ENABLE_CMDID,
+ WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
+
+ /* RTT measurement related cmd */
+ WMI_10X_RTT_MEASREQ_CMDID,
+ WMI_10X_RTT_TSF_CMDID,
+
+ /* transmit beacon by value */
+ WMI_10X_PDEV_SEND_BCN_CMDID,
+
+ /* F/W stats */
+ WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
+ WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
+ WMI_10X_REQUEST_STATS_CMDID,
+
+ /* GPIO Configuration */
+ WMI_10X_GPIO_CONFIG_CMDID,
+ WMI_10X_GPIO_OUTPUT_CMDID,
+
+ WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1,
+};
+
+enum wmi_10x_event_id {
+ WMI_10X_SERVICE_READY_EVENTID = 0x8000,
+ WMI_10X_READY_EVENTID,
+ WMI_10X_START_EVENTID = 0x9000,
+ WMI_10X_END_EVENTID = 0x9FFF,
+
+ /* Scan specific events */
+ WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID,
+ WMI_10X_ECHO_EVENTID,
+ WMI_10X_DEBUG_MESG_EVENTID,
+ WMI_10X_UPDATE_STATS_EVENTID,
+
+ /* Instantaneous RSSI event */
+ WMI_10X_INST_RSSI_STATS_EVENTID,
+
+ /* VDEV specific events */
+ WMI_10X_VDEV_START_RESP_EVENTID,
+ WMI_10X_VDEV_STANDBY_REQ_EVENTID,
+ WMI_10X_VDEV_RESUME_REQ_EVENTID,
+ WMI_10X_VDEV_STOPPED_EVENTID,
+
+ /* peer specific events */
+ WMI_10X_PEER_STA_KICKOUT_EVENTID,
+
+ /* beacon/mgmt specific events */
+ WMI_10X_HOST_SWBA_EVENTID,
+ WMI_10X_TBTTOFFSET_UPDATE_EVENTID,
+ WMI_10X_MGMT_RX_EVENTID,
+
+ /* Channel stats event */
+ WMI_10X_CHAN_INFO_EVENTID,
+
+ /* PHY Error specific WMI event */
+ WMI_10X_PHYERR_EVENTID,
+
+ /* Roam event to trigger roaming on host */
+ WMI_10X_ROAM_EVENTID,
+
+ /* matching AP found from list of profiles */
+ WMI_10X_PROFILE_MATCH,
+
+ /* debug print message used for tracing FW code while debugging */
+ WMI_10X_DEBUG_PRINT_EVENTID,
+ /* VI spoecific event */
+ WMI_10X_PDEV_QVIT_EVENTID,
+ /* FW code profile data in response to profile request */
+ WMI_10X_WLAN_PROFILE_DATA_EVENTID,
+
+ /*RTT related event ID*/
+ WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID,
+ WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID,
+ WMI_10X_RTT_ERROR_REPORT_EVENTID,
+
+ WMI_10X_WOW_WAKEUP_HOST_EVENTID,
+ WMI_10X_DCS_INTERFERENCE_EVENTID,
+
+ /* TPC config for the current operating channel */
+ WMI_10X_PDEV_TPC_CONFIG_EVENTID,
+
+ WMI_10X_GPIO_INPUT_EVENTID,
+ WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID-1,
+};
+
enum wmi_phy_mode {
MODE_11A = 0, /* 11a Mode */
MODE_11G = 1, /* 11b/g Mode */
--
1.7.10
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v2 03/13] ath10k: warn if give WMI command is not supported
2013-09-26 9:29 [PATCH v2 00/13] ath10k: dual-firmware support (MAIN and 10.X) Bartosz Markowski
2013-09-26 9:29 ` [PATCH v2 01/13] ath10k: introduce dynamic WMI structures Bartosz Markowski
2013-09-26 9:29 ` [PATCH v2 02/13] ath10k: add wmi_10x_<cmd/event> definitions Bartosz Markowski
@ 2013-09-26 9:29 ` Bartosz Markowski
2013-09-26 12:35 ` Kalle Valo
2013-09-26 9:29 ` [PATCH v2 04/13] ath10k: implement WMI events handling frame for both firmwares Bartosz Markowski
` (10 subsequent siblings)
13 siblings, 1 reply; 17+ messages in thread
From: Bartosz Markowski @ 2013-09-26 9:29 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Bartosz Markowski
This will show and make it easier to track the API
differences in the new AP firmware.
Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
---
drivers/net/wireless/ath/ath10k/wmi.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index cfb2082..fe55360 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -390,6 +390,11 @@ static int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb,
{
int ret = -EINVAL;
+ if (cmd_id == WMI_CMD_UNDEFINED) {
+ ath10k_warn("command not supported by given firmware\n");
+ return ret;
+ }
+
wait_event_timeout(ar->wmi.tx_credits_wq, ({
/* try to send pending beacons first. they take priority */
ath10k_wmi_tx_beacons_nowait(ar);
--
1.7.10
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v2 04/13] ath10k: implement WMI events handling frame for both firmwares
2013-09-26 9:29 [PATCH v2 00/13] ath10k: dual-firmware support (MAIN and 10.X) Bartosz Markowski
` (2 preceding siblings ...)
2013-09-26 9:29 ` [PATCH v2 03/13] ath10k: warn if give WMI command is not supported Bartosz Markowski
@ 2013-09-26 9:29 ` Bartosz Markowski
2013-09-26 9:29 ` [PATCH v2 05/13] ath10k: split ath10k_wmi_service_ready_event_rx Bartosz Markowski
` (9 subsequent siblings)
13 siblings, 0 replies; 17+ messages in thread
From: Bartosz Markowski @ 2013-09-26 9:29 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Bartosz Markowski
We still use the same function handlers for both main and 10.X
paths. Next step is to track down and make the split needed.
Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
---
drivers/net/wireless/ath/ath10k/wmi.c | 131 ++++++++++++++++++++++++++++++++-
1 file changed, 130 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index fe55360..2a7de6d 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -1211,6 +1211,24 @@ static void ath10k_wmi_event_vdev_install_key_complete(struct ath10k *ar,
ath10k_dbg(ATH10K_DBG_WMI, "WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID\n");
}
+static void ath10k_wmi_event_inst_rssi_stats(struct ath10k *ar,
+ struct sk_buff *skb)
+{
+ ath10k_dbg(ATH10K_DBG_WMI, "WMI_INST_RSSI_STATS_EVENTID\n");
+}
+
+static void ath10k_wmi_event_vdev_standby_req(struct ath10k *ar,
+ struct sk_buff *skb)
+{
+ ath10k_dbg(ATH10K_DBG_WMI, "WMI_VDEV_STANDBY_REQ_EVENTID\n");
+}
+
+static void ath10k_wmi_event_vdev_resume_req(struct ath10k *ar,
+ struct sk_buff *skb)
+{
+ ath10k_dbg(ATH10K_DBG_WMI, "WMI_VDEV_RESUME_REQ_EVENTID\n");
+}
+
static void ath10k_wmi_service_ready_event_rx(struct ath10k *ar,
struct sk_buff *skb)
{
@@ -1421,10 +1439,121 @@ static void ath10k_wmi_main_process_rx(struct ath10k *ar, struct sk_buff *skb)
dev_kfree_skb(skb);
}
+static void ath10k_wmi_10x_process_rx(struct ath10k *ar, struct sk_buff *skb)
+{
+ struct wmi_cmd_hdr *cmd_hdr;
+ enum wmi_10x_event_id id;
+ u16 len;
+
+ cmd_hdr = (struct wmi_cmd_hdr *)skb->data;
+ id = MS(__le32_to_cpu(cmd_hdr->cmd_id), WMI_CMD_HDR_CMD_ID);
+
+ if (skb_pull(skb, sizeof(struct wmi_cmd_hdr)) == NULL)
+ return;
+
+ len = skb->len;
+
+ trace_ath10k_wmi_event(id, skb->data, skb->len);
+
+ switch (id) {
+ case WMI_10X_MGMT_RX_EVENTID:
+ ath10k_wmi_event_mgmt_rx(ar, skb);
+ /* mgmt_rx() owns the skb now! */
+ return;
+ case WMI_10X_SCAN_EVENTID:
+ ath10k_wmi_event_scan(ar, skb);
+ break;
+ case WMI_10X_CHAN_INFO_EVENTID:
+ ath10k_wmi_event_chan_info(ar, skb);
+ break;
+ case WMI_10X_ECHO_EVENTID:
+ ath10k_wmi_event_echo(ar, skb);
+ break;
+ case WMI_10X_DEBUG_MESG_EVENTID:
+ ath10k_wmi_event_debug_mesg(ar, skb);
+ break;
+ case WMI_10X_UPDATE_STATS_EVENTID:
+ ath10k_wmi_event_update_stats(ar, skb);
+ break;
+ case WMI_10X_VDEV_START_RESP_EVENTID:
+ ath10k_wmi_event_vdev_start_resp(ar, skb);
+ break;
+ case WMI_10X_VDEV_STOPPED_EVENTID:
+ ath10k_wmi_event_vdev_stopped(ar, skb);
+ break;
+ case WMI_10X_PEER_STA_KICKOUT_EVENTID:
+ ath10k_wmi_event_peer_sta_kickout(ar, skb);
+ break;
+ case WMI_10X_HOST_SWBA_EVENTID:
+ ath10k_wmi_event_host_swba(ar, skb);
+ break;
+ case WMI_10X_TBTTOFFSET_UPDATE_EVENTID:
+ ath10k_wmi_event_tbttoffset_update(ar, skb);
+ break;
+ case WMI_10X_PHYERR_EVENTID:
+ ath10k_wmi_event_phyerr(ar, skb);
+ break;
+ case WMI_10X_ROAM_EVENTID:
+ ath10k_wmi_event_roam(ar, skb);
+ break;
+ case WMI_10X_PROFILE_MATCH:
+ ath10k_wmi_event_profile_match(ar, skb);
+ break;
+ case WMI_10X_DEBUG_PRINT_EVENTID:
+ ath10k_wmi_event_debug_print(ar, skb);
+ break;
+ case WMI_10X_PDEV_QVIT_EVENTID:
+ ath10k_wmi_event_pdev_qvit(ar, skb);
+ break;
+ case WMI_10X_WLAN_PROFILE_DATA_EVENTID:
+ ath10k_wmi_event_wlan_profile_data(ar, skb);
+ break;
+ case WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID:
+ ath10k_wmi_event_rtt_measurement_report(ar, skb);
+ break;
+ case WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID:
+ ath10k_wmi_event_tsf_measurement_report(ar, skb);
+ break;
+ case WMI_10X_RTT_ERROR_REPORT_EVENTID:
+ ath10k_wmi_event_rtt_error_report(ar, skb);
+ break;
+ case WMI_10X_WOW_WAKEUP_HOST_EVENTID:
+ ath10k_wmi_event_wow_wakeup_host(ar, skb);
+ break;
+ case WMI_10X_DCS_INTERFERENCE_EVENTID:
+ ath10k_wmi_event_dcs_interference(ar, skb);
+ break;
+ case WMI_10X_PDEV_TPC_CONFIG_EVENTID:
+ ath10k_wmi_event_pdev_tpc_config(ar, skb);
+ break;
+ case WMI_10X_INST_RSSI_STATS_EVENTID:
+ ath10k_wmi_event_inst_rssi_stats(ar, skb);
+ break;
+ case WMI_10X_VDEV_STANDBY_REQ_EVENTID:
+ ath10k_wmi_event_vdev_standby_req(ar, skb);
+ break;
+ case WMI_10X_VDEV_RESUME_REQ_EVENTID:
+ ath10k_wmi_event_vdev_resume_req(ar, skb);
+ break;
+ case WMI_10X_SERVICE_READY_EVENTID:
+ ath10k_wmi_service_ready_event_rx(ar, skb);
+ break;
+ case WMI_10X_READY_EVENTID:
+ ath10k_wmi_ready_event_rx(ar, skb);
+ break;
+ default:
+ ath10k_warn("Unknown eventid: %d\n", id);
+ break;
+ }
+
+ dev_kfree_skb(skb);
+}
+
+
static void ath10k_wmi_process_rx(struct ath10k *ar, struct sk_buff *skb)
{
if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features))
- ath10k_warn("Firmware 10.X is not yet supported\n");
+ ath10k_wmi_10x_process_rx(ar, skb);
else
ath10k_wmi_main_process_rx(ar, skb);
}
--
1.7.10
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v2 05/13] ath10k: split ath10k_wmi_service_ready_event_rx
2013-09-26 9:29 [PATCH v2 00/13] ath10k: dual-firmware support (MAIN and 10.X) Bartosz Markowski
` (3 preceding siblings ...)
2013-09-26 9:29 ` [PATCH v2 04/13] ath10k: implement WMI events handling frame for both firmwares Bartosz Markowski
@ 2013-09-26 9:29 ` Bartosz Markowski
2013-09-26 12:38 ` Kalle Valo
2013-09-26 9:29 ` [PATCH v2 06/13] ath10k: drop the fw versioning sanity check Bartosz Markowski
` (8 subsequent siblings)
13 siblings, 1 reply; 17+ messages in thread
From: Bartosz Markowski @ 2013-09-26 9:29 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Bartosz Markowski
Since the both firmwares we are going to support,
have significantly different APIs (WMI and shared
structures), it's easier to actually split the whole
event handling functions, instead cutting them inside.
The fork starts now on ath10k_wmi_process_rx().
Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
---
drivers/net/wireless/ath/ath10k/wmi.c | 66 ++++++++++++++++++++++++++++++++-
drivers/net/wireless/ath/ath10k/wmi.h | 40 ++++++++++++++++++++
2 files changed, 105 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 2a7de6d..8f4d0f6 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -1300,6 +1300,70 @@ static void ath10k_wmi_service_ready_event_rx(struct ath10k *ar,
complete(&ar->wmi.service_ready);
}
+static void ath10k_wmi_10x_service_ready_event_rx(struct ath10k *ar,
+ struct sk_buff *skb)
+{
+ struct wmi_service_ready_event_10x *ev = (void *)skb->data;
+
+ if (skb->len < sizeof(*ev)) {
+ ath10k_warn("Service ready event was %d B but expected %zu B. Wrong firmware version?\n",
+ skb->len, sizeof(*ev));
+ return;
+ }
+
+ ar->hw_min_tx_power = __le32_to_cpu(ev->hw_min_tx_power);
+ ar->hw_max_tx_power = __le32_to_cpu(ev->hw_max_tx_power);
+ ar->ht_cap_info = __le32_to_cpu(ev->ht_cap_info);
+ ar->vht_cap_info = __le32_to_cpu(ev->vht_cap_info);
+ ar->fw_version_major =
+ (__le32_to_cpu(ev->sw_version) & 0xff000000) >> 24;
+ ar->fw_version_minor = (__le32_to_cpu(ev->sw_version) & 0x00ffffff);
+ ar->phy_capability = __le32_to_cpu(ev->phy_capability);
+ ar->num_rf_chains = __le32_to_cpu(ev->num_rf_chains);
+
+ if (ar->num_rf_chains > WMI_MAX_SPATIAL_STREAM) {
+ ath10k_warn("hardware advertises support for more spatial streams than it should (%d > %d)\n",
+ ar->num_rf_chains, WMI_MAX_SPATIAL_STREAM);
+ ar->num_rf_chains = WMI_MAX_SPATIAL_STREAM;
+ }
+
+ ar->ath_common.regulatory.current_rd =
+ __le32_to_cpu(ev->hal_reg_capabilities.eeprom_rd);
+
+ ath10k_debug_read_service_map(ar, ev->wmi_service_bitmap,
+ sizeof(ev->wmi_service_bitmap));
+
+ if (strlen(ar->hw->wiphy->fw_version) == 0) {
+ snprintf(ar->hw->wiphy->fw_version,
+ sizeof(ar->hw->wiphy->fw_version),
+ "%u.%u",
+ ar->fw_version_major,
+ ar->fw_version_minor);
+ }
+
+ /* FIXME: it probably should be better to support this.
+ TODO: Next patch introduce memory chunks. It's a must for 10.x FW */
+ if (__le32_to_cpu(ev->num_mem_reqs) > 0) {
+ ath10k_warn("target requested %d memory chunks; ignoring\n",
+ __le32_to_cpu(ev->num_mem_reqs));
+ }
+
+ ath10k_dbg(ATH10K_DBG_WMI,
+ "wmi event service ready sw_ver 0x%08x abi_ver %u phy_cap 0x%08x ht_cap 0x%08x vht_cap 0x%08x vht_supp_msc 0x%08x sys_cap_info 0x%08x mem_reqs %u num_rf_chains %u\n",
+ __le32_to_cpu(ev->sw_version),
+ __le32_to_cpu(ev->abi_version),
+ __le32_to_cpu(ev->phy_capability),
+ __le32_to_cpu(ev->ht_cap_info),
+ __le32_to_cpu(ev->vht_cap_info),
+ __le32_to_cpu(ev->vht_supp_mcs),
+ __le32_to_cpu(ev->sys_cap_info),
+ __le32_to_cpu(ev->num_mem_reqs),
+ __le32_to_cpu(ev->num_rf_chains));
+
+ complete(&ar->wmi.service_ready);
+}
+
+
static int ath10k_wmi_ready_event_rx(struct ath10k *ar, struct sk_buff *skb)
{
struct wmi_ready_event *ev = (struct wmi_ready_event *)skb->data;
@@ -1536,7 +1600,7 @@ static void ath10k_wmi_10x_process_rx(struct ath10k *ar, struct sk_buff *skb)
ath10k_wmi_event_vdev_resume_req(ar, skb);
break;
case WMI_10X_SERVICE_READY_EVENTID:
- ath10k_wmi_service_ready_event_rx(ar, skb);
+ ath10k_wmi_10x_service_ready_event_rx(ar, skb);
break;
case WMI_10X_READY_EVENTID:
ath10k_wmi_ready_event_rx(ar, skb);
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index d8414ab..a0cfdfd 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -1130,6 +1130,46 @@ struct wmi_service_ready_event {
struct wlan_host_mem_req mem_reqs[1];
} __packed;
+/* This is the definition from 10.X firmware branch */
+struct wmi_service_ready_event_10x {
+ __le32 sw_version;
+ __le32 abi_version;
+
+ /* WMI_PHY_CAPABILITY */
+ __le32 phy_capability;
+
+ /* Maximum number of frag table entries that SW will populate less 1 */
+ __le32 max_frag_entry;
+ __le32 wmi_service_bitmap[WMI_SERVICE_BM_SIZE];
+ __le32 num_rf_chains;
+
+ /*
+ * The following field is only valid for service type
+ * WMI_SERVICE_11AC
+ */
+ __le32 ht_cap_info; /* WMI HT Capability */
+ __le32 vht_cap_info; /* VHT capability info field of 802.11ac */
+ __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */
+ __le32 hw_min_tx_power;
+ __le32 hw_max_tx_power;
+
+ struct hal_reg_capabilities hal_reg_capabilities;
+
+ __le32 sys_cap_info;
+ __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */
+
+ /*
+ * request to host to allocate a chuck of memory and pss it down to FW
+ * via WM_INIT. FW uses this as FW extesnsion memory for saving its
+ * data structures. Only valid for low latency interfaces like PCIE
+ * where FW can access this memory directly (or) by DMA.
+ */
+ __le32 num_mem_reqs;
+
+ struct wlan_host_mem_req mem_reqs[1];
+} __packed;
+
+
#define WMI_SERVICE_READY_TIMEOUT_HZ (5*HZ)
#define WMI_UNIFIED_READY_TIMEOUT_HZ (5*HZ)
--
1.7.10
^ permalink raw reply related [flat|nested] 17+ messages in thread* Re: [PATCH v2 05/13] ath10k: split ath10k_wmi_service_ready_event_rx
2013-09-26 9:29 ` [PATCH v2 05/13] ath10k: split ath10k_wmi_service_ready_event_rx Bartosz Markowski
@ 2013-09-26 12:38 ` Kalle Valo
0 siblings, 0 replies; 17+ messages in thread
From: Kalle Valo @ 2013-09-26 12:38 UTC (permalink / raw)
To: Bartosz Markowski; +Cc: ath10k, linux-wireless
Bartosz Markowski <bartosz.markowski@tieto.com> writes:
> Since the both firmwares we are going to support,
> have significantly different APIs (WMI and shared
> structures), it's easier to actually split the whole
> event handling functions, instead cutting them inside.
>
> The fork starts now on ath10k_wmi_process_rx().
>
> Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
[...]
> + complete(&ar->wmi.service_ready);
> +}
> +
> +
> static int ath10k_wmi_ready_event_rx(struct ath10k *ar, struct sk_buff *skb)
Only one empty line between functions.
--
Kalle Valo
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH v2 06/13] ath10k: drop the fw versioning sanity check
2013-09-26 9:29 [PATCH v2 00/13] ath10k: dual-firmware support (MAIN and 10.X) Bartosz Markowski
` (4 preceding siblings ...)
2013-09-26 9:29 ` [PATCH v2 05/13] ath10k: split ath10k_wmi_service_ready_event_rx Bartosz Markowski
@ 2013-09-26 9:29 ` Bartosz Markowski
2013-09-26 9:29 ` [PATCH v2 07/13] ath10k: implement host memory chunks Bartosz Markowski
` (7 subsequent siblings)
13 siblings, 0 replies; 17+ messages in thread
From: Bartosz Markowski @ 2013-09-26 9:29 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Bartosz Markowski
It was corrupted and leading to compilation warning
core.c: In function 'ath10k_check_fw_version':
core.c:79: warning: comparison is always true due to limited range of data type
Since we are going to support new FW track in the driver,
the sanity check for fw version number would be an overkill
then. This is just for information purposes anyway.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
---
drivers/net/wireless/ath/ath10k/core.c | 25 -------------------------
drivers/net/wireless/ath/ath10k/hw.h | 6 ------
2 files changed, 31 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 76906d5..31860a6 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -59,27 +59,6 @@ static void ath10k_send_suspend_complete(struct ath10k *ar)
wake_up(&ar->event_queue);
}
-static int ath10k_check_fw_version(struct ath10k *ar)
-{
- char version[32];
-
- if (ar->fw_version_major >= SUPPORTED_FW_MAJOR &&
- ar->fw_version_minor >= SUPPORTED_FW_MINOR &&
- ar->fw_version_release >= SUPPORTED_FW_RELEASE &&
- ar->fw_version_build >= SUPPORTED_FW_BUILD)
- return 0;
-
- snprintf(version, sizeof(version), "%u.%u.%u.%u",
- SUPPORTED_FW_MAJOR, SUPPORTED_FW_MINOR,
- SUPPORTED_FW_RELEASE, SUPPORTED_FW_BUILD);
-
- ath10k_warn("WARNING: Firmware version %s is not officially supported.\n",
- ar->hw->wiphy->fw_version);
- ath10k_warn("Please upgrade to version %s (or newer)\n", version);
-
- return 0;
-}
-
static int ath10k_init_connect_htc(struct ath10k *ar)
{
int status;
@@ -616,10 +595,6 @@ int ath10k_core_start(struct ath10k *ar)
ath10k_info("firmware %s booted\n", ar->hw->wiphy->fw_version);
- status = ath10k_check_fw_version(ar);
- if (status)
- goto err_disconnect_htc;
-
status = ath10k_wmi_cmd_init(ar);
if (status) {
ath10k_err("could not send WMI init command (%d)\n", status);
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 8c1be768..66e721a 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -20,12 +20,6 @@
#include "targaddrs.h"
-/* Supported FW version */
-#define SUPPORTED_FW_MAJOR 1
-#define SUPPORTED_FW_MINOR 0
-#define SUPPORTED_FW_RELEASE 0
-#define SUPPORTED_FW_BUILD 636
-
/* QCA988X 1.0 definitions (unsupported) */
#define QCA988X_HW_1_0_CHIP_ID_REV 0x0
--
1.7.10
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v2 07/13] ath10k: implement host memory chunks
2013-09-26 9:29 [PATCH v2 00/13] ath10k: dual-firmware support (MAIN and 10.X) Bartosz Markowski
` (5 preceding siblings ...)
2013-09-26 9:29 ` [PATCH v2 06/13] ath10k: drop the fw versioning sanity check Bartosz Markowski
@ 2013-09-26 9:29 ` Bartosz Markowski
2013-09-26 9:29 ` [PATCH v2 08/13] ath10k: bring back the WMI path for mgmt frames Bartosz Markowski
` (6 subsequent siblings)
13 siblings, 0 replies; 17+ messages in thread
From: Bartosz Markowski @ 2013-09-26 9:29 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Bartosz Markowski
10.X firmware can request a memory pool from host to offload
it's own resources. This is a feature designed especially
for AP mode where the target has to deal with large number
of peers.
So we allocate and map a consistent DMA memory which FW can
use to store e.g. peer rate contol maps.
Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
---
drivers/net/wireless/ath/ath10k/core.h | 12 +++
drivers/net/wireless/ath/ath10k/wmi.c | 126 ++++++++++++++++++++++++++++++--
drivers/net/wireless/ath/ath10k/wmi.h | 3 +
3 files changed, 133 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index acfee7c..e2a2658 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -102,12 +102,24 @@ struct ath10k_bmi {
bool done_sent;
};
+#define ATH10K_MAX_MEM_REQS 16
+
+struct ath10k_mem_chunk {
+ void *vaddr;
+ dma_addr_t paddr;
+ u32 len;
+ u32 req_id;
+};
+
struct ath10k_wmi {
enum ath10k_htc_ep_id eid;
struct completion service_ready;
struct completion unified_ready;
wait_queue_head_t tx_credits_wq;
struct wmi_cmd_map *cmd;
+
+ u32 num_mem_chunks;
+ struct ath10k_mem_chunk mem_chunks[ATH10K_MAX_MEM_REQS];
};
struct ath10k_peer_stat {
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 8f4d0f6..b57dfb8 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -1229,6 +1229,37 @@ static void ath10k_wmi_event_vdev_resume_req(struct ath10k *ar,
ath10k_dbg(ATH10K_DBG_WMI, "WMI_VDEV_RESUME_REQ_EVENTID\n");
}
+static int ath10k_wmi_alloc_host_mem(struct ath10k *ar, u32 req_id,
+ u32 num_units, u32 unit_len)
+{
+ dma_addr_t paddr;
+ u32 pool_size;
+ int idx = ar->wmi.num_mem_chunks;
+
+ pool_size = num_units * round_up(unit_len, 4);
+
+ if (!pool_size)
+ return -EINVAL;
+
+ ar->wmi.mem_chunks[idx].vaddr = dma_alloc_coherent(ar->dev,
+ pool_size,
+ &paddr,
+ GFP_ATOMIC);
+ if (!ar->wmi.mem_chunks[idx].vaddr) {
+ ath10k_warn("failed to allocate memory chunk\n");
+ return -ENOMEM;
+ }
+
+ memset(ar->wmi.mem_chunks[idx].vaddr, 0, pool_size);
+
+ ar->wmi.mem_chunks[idx].paddr = paddr;
+ ar->wmi.mem_chunks[idx].len = pool_size;
+ ar->wmi.mem_chunks[idx].req_id = req_id;
+ ar->wmi.num_mem_chunks++;
+
+ return 0;
+}
+
static void ath10k_wmi_service_ready_event_rx(struct ath10k *ar,
struct sk_buff *skb)
{
@@ -1303,6 +1334,8 @@ static void ath10k_wmi_service_ready_event_rx(struct ath10k *ar,
static void ath10k_wmi_10x_service_ready_event_rx(struct ath10k *ar,
struct sk_buff *skb)
{
+ u32 num_units, req_id, unit_size, num_mem_reqs, num_unit_info, i;
+ int ret;
struct wmi_service_ready_event_10x *ev = (void *)skb->data;
if (skb->len < sizeof(*ev)) {
@@ -1341,13 +1374,50 @@ static void ath10k_wmi_10x_service_ready_event_rx(struct ath10k *ar,
ar->fw_version_minor);
}
- /* FIXME: it probably should be better to support this.
- TODO: Next patch introduce memory chunks. It's a must for 10.x FW */
- if (__le32_to_cpu(ev->num_mem_reqs) > 0) {
- ath10k_warn("target requested %d memory chunks; ignoring\n",
- __le32_to_cpu(ev->num_mem_reqs));
+ num_mem_reqs = __le32_to_cpu(ev->num_mem_reqs);
+
+ if (num_mem_reqs > ATH10K_MAX_MEM_REQS) {
+ ath10k_warn("requested memory chunks number (%d) exceeds the limit\n",
+ num_mem_reqs);
+ return;
}
+ if (!num_mem_reqs)
+ goto exit;
+
+ ath10k_dbg(ATH10K_DBG_WMI, "firmware has requested %d memory chunks\n",
+ num_mem_reqs);
+
+ for (i = 0; i < num_mem_reqs; ++i) {
+ req_id = __le32_to_cpu(ev->mem_reqs[i].req_id);
+ num_units = __le32_to_cpu(ev->mem_reqs[i].num_units);
+ unit_size = __le32_to_cpu(ev->mem_reqs[i].unit_size);
+ num_unit_info = __le32_to_cpu(ev->mem_reqs[i].num_unit_info);
+
+ if (num_unit_info & NUM_UNITS_IS_NUM_PEERS)
+ /* number of units to allocate is number of
+ * peers, 1 extra for self peer on target */
+ /* this needs to be tied, host and target
+ * can get out of sync */
+ num_units = TARGET_NUM_PEERS + 1;
+ else if (num_unit_info & NUM_UNITS_IS_NUM_VDEVS)
+ num_units = TARGET_NUM_VDEVS + 1;
+
+ ath10k_dbg(ATH10K_DBG_WMI,
+ "wmi mem_req_id %d num_units %d num_unit_info %d unit size %d actual units %d\n",
+ req_id,
+ __le32_to_cpu(ev->mem_reqs[i].num_units),
+ num_unit_info,
+ unit_size,
+ num_units);
+
+ ret = ath10k_wmi_alloc_host_mem(ar, req_id, num_units,
+ unit_size);
+ if (ret)
+ return;
+ }
+
+exit:
ath10k_dbg(ATH10K_DBG_WMI,
"wmi event service ready sw_ver 0x%08x abi_ver %u phy_cap 0x%08x ht_cap 0x%08x vht_cap 0x%08x vht_supp_msc 0x%08x sys_cap_info 0x%08x mem_reqs %u num_rf_chains %u\n",
__le32_to_cpu(ev->sw_version),
@@ -1645,6 +1715,17 @@ int ath10k_wmi_attach(struct ath10k *ar)
void ath10k_wmi_detach(struct ath10k *ar)
{
+ int i;
+
+ /* free the host memory chunks requested by firmware */
+ for (i = 0; i < ar->wmi.num_mem_chunks; i++) {
+ dma_free_coherent(ar->dev,
+ ar->wmi.mem_chunks[i].len,
+ ar->wmi.mem_chunks[i].vaddr,
+ ar->wmi.mem_chunks[i].paddr);
+ }
+
+ ar->wmi.num_mem_chunks = 0;
}
int ath10k_wmi_connect_htc_service(struct ath10k *ar)
@@ -1781,7 +1862,8 @@ int ath10k_wmi_cmd_init(struct ath10k *ar)
struct wmi_init_cmd *cmd;
struct sk_buff *buf;
struct wmi_resource_config config = {};
- u32 val;
+ u32 len, val;
+ int i;
config.num_vdevs = __cpu_to_le32(TARGET_NUM_VDEVS);
config.num_peers = __cpu_to_le32(TARGET_NUM_PEERS + TARGET_NUM_VDEVS);
@@ -1834,12 +1916,40 @@ int ath10k_wmi_cmd_init(struct ath10k *ar)
config.num_msdu_desc = __cpu_to_le32(TARGET_NUM_MSDU_DESC);
config.max_frag_entries = __cpu_to_le32(TARGET_MAX_FRAG_ENTRIES);
- buf = ath10k_wmi_alloc_skb(sizeof(*cmd));
+ len = sizeof(*cmd) +
+ (sizeof(struct host_memory_chunk) * ar->wmi.num_mem_chunks);
+
+ buf = ath10k_wmi_alloc_skb(len);
if (!buf)
return -ENOMEM;
cmd = (struct wmi_init_cmd *)buf->data;
- cmd->num_host_mem_chunks = 0;
+
+ if (ar->wmi.num_mem_chunks == 0) {
+ cmd->num_host_mem_chunks = 0;
+ goto out;
+ }
+
+ ath10k_dbg(ATH10K_DBG_WMI, "wmi sending %d memory chunks info.\n",
+ __cpu_to_le32(ar->wmi.num_mem_chunks));
+
+ cmd->num_host_mem_chunks = __cpu_to_le32(ar->wmi.num_mem_chunks);
+
+ for (i = 0; i < ar->wmi.num_mem_chunks; i++) {
+ cmd->host_mem_chunks[i].ptr =
+ __cpu_to_le32(ar->wmi.mem_chunks[i].paddr);
+ cmd->host_mem_chunks[i].size =
+ __cpu_to_le32(ar->wmi.mem_chunks[i].len);
+ cmd->host_mem_chunks[i].req_id =
+ __cpu_to_le32(ar->wmi.mem_chunks[i].req_id);
+
+ ath10k_dbg(ATH10K_DBG_WMI,
+ "wmi chunk %d len %d requested, addr 0x%x\n",
+ i,
+ cmd->host_mem_chunks[i].size,
+ cmd->host_mem_chunks[i].ptr);
+ }
+out:
memcpy(&cmd->resource_config, &config, sizeof(config));
ath10k_dbg(ATH10K_DBG_WMI, "wmi init\n");
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index a0cfdfd..56339d2 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -1377,6 +1377,9 @@ struct wmi_resource_config {
__le32 max_frag_entries;
} __packed;
+#define NUM_UNITS_IS_NUM_VDEVS 0x1
+#define NUM_UNITS_IS_NUM_PEERS 0x2
+
/* strucutre describing host memory chunk. */
struct host_memory_chunk {
/* id of the request that is passed up in service ready */
--
1.7.10
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v2 08/13] ath10k: bring back the WMI path for mgmt frames
2013-09-26 9:29 [PATCH v2 00/13] ath10k: dual-firmware support (MAIN and 10.X) Bartosz Markowski
` (6 preceding siblings ...)
2013-09-26 9:29 ` [PATCH v2 07/13] ath10k: implement host memory chunks Bartosz Markowski
@ 2013-09-26 9:29 ` Bartosz Markowski
2013-09-26 9:29 ` [PATCH v2 09/13] ath10k: split wmi_cmd_init path Bartosz Markowski
` (5 subsequent siblings)
13 siblings, 0 replies; 17+ messages in thread
From: Bartosz Markowski @ 2013-09-26 9:29 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Bartosz Markowski
This is still the only way to submit mgmt frames in case
of 10.X firmware.
This patch introduces wmi_mgmt_tx queue, because of the
fact WMI command can block. This is a problem for
ath10k_tx_htt(), since it's called from atomic context.
The skb queue and worker are introduced to move the mgmt
frame handling out of .tx callback context and not block.
Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
---
drivers/net/wireless/ath/ath10k/core.c | 3 ++
drivers/net/wireless/ath/ath10k/core.h | 10 ++++-
drivers/net/wireless/ath/ath10k/htt_tx.c | 4 +-
drivers/net/wireless/ath/ath10k/mac.c | 70 +++++++++++++++++++++++++-----
drivers/net/wireless/ath/ath10k/mac.h | 2 +
drivers/net/wireless/ath/ath10k/wmi.c | 51 ++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi.h | 1 +
7 files changed, 128 insertions(+), 13 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 31860a6..bd74dac 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -520,6 +520,9 @@ struct ath10k *ath10k_core_create(void *hif_priv, struct device *dev,
INIT_WORK(&ar->offchan_tx_work, ath10k_offchan_tx_work);
skb_queue_head_init(&ar->offchan_tx_queue);
+ INIT_WORK(&ar->wmi_mgmt_tx_work, ath10k_mgmt_over_wmi_tx_work);
+ skb_queue_head_init(&ar->wmi_mgmt_tx_queue);
+
init_waitqueue_head(&ar->event_queue);
INIT_WORK(&ar->restart_work, ath10k_core_restart);
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index e2a2658..984db11 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -43,15 +43,17 @@
/* Antenna noise floor */
#define ATH10K_DEFAULT_NOISE_FLOOR -95
+#define ATH10K_MAX_NUM_MGMT_PENDING 16
+
struct ath10k;
struct ath10k_skb_cb {
dma_addr_t paddr;
bool is_mapped;
bool is_aborted;
+ u8 vdev_id;
struct {
- u8 vdev_id;
u8 tid;
bool is_offchan;
@@ -284,6 +286,9 @@ enum ath10k_fw_features {
/* firmware from 10X branch */
ATH10K_FW_FEATURE_WMI_10X = 1,
+ /* firmware support tx frame management over WMI, otherwise it's HTT */
+ ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX = 2,
+
/* keep last */
ATH10K_FW_FEATURE_COUNT,
};
@@ -393,6 +398,9 @@ struct ath10k {
struct completion offchan_tx_completed;
struct sk_buff *offchan_tx_skb;
+ struct work_struct wmi_mgmt_tx_work;
+ struct sk_buff_head wmi_mgmt_tx_queue;
+
enum ath10k_state state;
struct work_struct restart_work;
diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c
index 3b93c6a..d9335e9 100644
--- a/drivers/net/wireless/ath/ath10k/htt_tx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -308,7 +308,7 @@ int ath10k_htt_mgmt_tx(struct ath10k_htt *htt, struct sk_buff *msdu)
struct sk_buff *txdesc = NULL;
struct htt_cmd *cmd;
struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(msdu);
- u8 vdev_id = skb_cb->htt.vdev_id;
+ u8 vdev_id = skb_cb->vdev_id;
int len = 0;
int msdu_id = -1;
int res;
@@ -384,7 +384,7 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu)
struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(msdu);
struct sk_buff *txdesc = NULL;
bool use_frags;
- u8 vdev_id = ATH10K_SKB_CB(msdu)->htt.vdev_id;
+ u8 vdev_id = ATH10K_SKB_CB(msdu)->vdev_id;
u8 tid;
int prefetch_len, desc_len;
int msdu_id = -1;
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 99a9bad..cadf90d 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1489,7 +1489,7 @@ static void ath10k_tx_h_add_p2p_noa_ie(struct ath10k *ar, struct sk_buff *skb)
static void ath10k_tx_htt(struct ath10k *ar, struct sk_buff *skb)
{
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
- int ret;
+ int ret = 0;
if (ar->htt.target_version_major >= 3) {
/* Since HTT 3.0 there is no separate mgmt tx command */
@@ -1497,16 +1497,32 @@ static void ath10k_tx_htt(struct ath10k *ar, struct sk_buff *skb)
goto exit;
}
- if (ieee80211_is_mgmt(hdr->frame_control))
- ret = ath10k_htt_mgmt_tx(&ar->htt, skb);
- else if (ieee80211_is_nullfunc(hdr->frame_control))
+ if (ieee80211_is_mgmt(hdr->frame_control)) {
+ if (test_bit(ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX,
+ ar->fw_features)) {
+ if (skb_queue_len(&ar->wmi_mgmt_tx_queue) >=
+ ATH10K_MAX_NUM_MGMT_PENDING) {
+ ath10k_warn("wmi mgmt_tx queue limit reached\n");
+ ret = -EBUSY;
+ goto exit;
+ }
+
+ skb_queue_tail(&ar->wmi_mgmt_tx_queue, skb);
+ ieee80211_queue_work(ar->hw, &ar->wmi_mgmt_tx_work);
+ } else {
+ ret = ath10k_htt_mgmt_tx(&ar->htt, skb);
+ }
+ } else if (!test_bit(ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX,
+ ar->fw_features) &&
+ ieee80211_is_nullfunc(hdr->frame_control)) {
/* FW does not report tx status properly for NullFunc frames
* unless they are sent through mgmt tx path. mac80211 sends
- * those frames when it detects link/beacon loss and depends on
- * the tx status to be correct. */
+ * those frames when it detects link/beacon loss and depends
+ * on the tx status to be correct. */
ret = ath10k_htt_mgmt_tx(&ar->htt, skb);
- else
+ } else {
ret = ath10k_htt_tx(&ar->htt, skb);
+ }
exit:
if (ret) {
@@ -1557,7 +1573,7 @@ void ath10k_offchan_tx_work(struct work_struct *work)
hdr = (struct ieee80211_hdr *)skb->data;
peer_addr = ieee80211_get_DA(hdr);
- vdev_id = ATH10K_SKB_CB(skb)->htt.vdev_id;
+ vdev_id = ATH10K_SKB_CB(skb)->vdev_id;
spin_lock_bh(&ar->data_lock);
peer = ath10k_peer_find(ar, vdev_id, peer_addr);
@@ -1599,6 +1615,36 @@ void ath10k_offchan_tx_work(struct work_struct *work)
}
}
+void ath10k_mgmt_over_wmi_tx_purge(struct ath10k *ar)
+{
+ struct sk_buff *skb;
+
+ for (;;) {
+ skb = skb_dequeue(&ar->wmi_mgmt_tx_queue);
+ if (!skb)
+ break;
+
+ ieee80211_free_txskb(ar->hw, skb);
+ }
+}
+
+void ath10k_mgmt_over_wmi_tx_work(struct work_struct *work)
+{
+ struct ath10k *ar = container_of(work, struct ath10k, wmi_mgmt_tx_work);
+ struct sk_buff *skb;
+ int ret;
+
+ for (;;) {
+ skb = skb_dequeue(&ar->wmi_mgmt_tx_queue);
+ if (!skb)
+ break;
+
+ ret = ath10k_wmi_mgmt_tx(ar, skb);
+ if (ret)
+ ath10k_warn("wmi mgmt_tx failed (%d)\n", ret);
+ }
+}
+
/************/
/* Scanning */
/************/
@@ -1757,14 +1803,14 @@ static void ath10k_tx(struct ieee80211_hw *hw,
ath10k_tx_h_seq_no(skb);
}
+ ATH10K_SKB_CB(skb)->vdev_id = vdev_id;
ATH10K_SKB_CB(skb)->htt.is_offchan = false;
- ATH10K_SKB_CB(skb)->htt.vdev_id = vdev_id;
ATH10K_SKB_CB(skb)->htt.tid = tid;
if (info->flags & IEEE80211_TX_CTL_TX_OFFCHAN) {
spin_lock_bh(&ar->data_lock);
ATH10K_SKB_CB(skb)->htt.is_offchan = true;
- ATH10K_SKB_CB(skb)->htt.vdev_id = ar->scan.vdev_id;
+ ATH10K_SKB_CB(skb)->vdev_id = ar->scan.vdev_id;
spin_unlock_bh(&ar->data_lock);
ath10k_dbg(ATH10K_DBG_MAC, "queued offchannel skb %p\n", skb);
@@ -1786,6 +1832,7 @@ void ath10k_halt(struct ath10k *ar)
del_timer_sync(&ar->scan.timeout);
ath10k_offchan_tx_purge(ar);
+ ath10k_mgmt_over_wmi_tx_purge(ar);
ath10k_peer_cleanup_all(ar);
ath10k_core_stop(ar);
ath10k_hif_power_down(ar);
@@ -1862,7 +1909,10 @@ static void ath10k_stop(struct ieee80211_hw *hw)
ar->state = ATH10K_STATE_OFF;
mutex_unlock(&ar->conf_mutex);
+ ath10k_mgmt_over_wmi_tx_purge(ar);
+
cancel_work_sync(&ar->offchan_tx_work);
+ cancel_work_sync(&ar->wmi_mgmt_tx_work);
cancel_work_sync(&ar->restart_work);
}
diff --git a/drivers/net/wireless/ath/ath10k/mac.h b/drivers/net/wireless/ath/ath10k/mac.h
index 6fce9bf..ba10219 100644
--- a/drivers/net/wireless/ath/ath10k/mac.h
+++ b/drivers/net/wireless/ath/ath10k/mac.h
@@ -34,6 +34,8 @@ struct ath10k_vif *ath10k_get_arvif(struct ath10k *ar, u32 vdev_id);
void ath10k_reset_scan(unsigned long ptr);
void ath10k_offchan_tx_purge(struct ath10k *ar);
void ath10k_offchan_tx_work(struct work_struct *work);
+void ath10k_mgmt_over_wmi_tx_purge(struct ath10k *ar);
+void ath10k_mgmt_over_wmi_tx_work(struct work_struct *work);
void ath10k_halt(struct ath10k *ar);
static inline struct ath10k_vif *ath10k_vif_to_arvif(struct ieee80211_vif *vif)
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index b57dfb8..422033a 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -409,6 +409,57 @@ static int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb,
return ret;
}
+int ath10k_wmi_mgmt_tx(struct ath10k *ar, struct sk_buff *skb)
+{
+ int ret = 0;
+ struct wmi_mgmt_tx_cmd *cmd;
+ struct ieee80211_hdr *hdr;
+ struct sk_buff *wmi_skb;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ int len;
+ u16 fc;
+
+ hdr = (struct ieee80211_hdr *)skb->data;
+ fc = le16_to_cpu(hdr->frame_control);
+
+ if (WARN_ON_ONCE(!ieee80211_is_mgmt(hdr->frame_control)))
+ return -EINVAL;
+
+ len = sizeof(cmd->hdr) + skb->len;
+ len = round_up(len, 4);
+
+ wmi_skb = ath10k_wmi_alloc_skb(len);
+ if (!wmi_skb)
+ return -ENOMEM;
+
+ cmd = (struct wmi_mgmt_tx_cmd *)wmi_skb->data;
+
+ cmd->hdr.vdev_id = __cpu_to_le32(ATH10K_SKB_CB(skb)->vdev_id);
+ cmd->hdr.tx_rate = 0;
+ cmd->hdr.tx_power = 0;
+ cmd->hdr.buf_len = __cpu_to_le32((u32)(skb->len));
+
+ memcpy(cmd->hdr.peer_macaddr.addr, ieee80211_get_DA(hdr), ETH_ALEN);
+ memcpy(cmd->buf, skb->data, skb->len);
+
+ ath10k_dbg(ATH10K_DBG_WMI, "wmi mgmt tx skb %p len %d ftype %02x stype %02x\n",
+ wmi_skb, wmi_skb->len, fc & IEEE80211_FCTL_FTYPE,
+ fc & IEEE80211_FCTL_STYPE);
+
+ /* Send the management frame buffer to the target */
+ ret = ath10k_wmi_cmd_send(ar, wmi_skb, ar->wmi.cmd->mgmt_tx_cmdid);
+ if (ret) {
+ dev_kfree_skb_any(skb);
+ return ret;
+ }
+
+ /* TODO: report tx status to mac80211 - temporary just ACK */
+ info->flags |= IEEE80211_TX_STAT_ACK;
+ ieee80211_tx_status_irqsafe(ar->hw, skb);
+
+ return ret;
+}
+
static int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb)
{
struct wmi_scan_event *event = (struct wmi_scan_event *)skb->data;
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 56339d2..1c515d6 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -3483,5 +3483,6 @@ int ath10k_wmi_pdev_set_wmm_params(struct ath10k *ar,
int ath10k_wmi_request_stats(struct ath10k *ar, enum wmi_stats_id stats_id);
int ath10k_wmi_force_fw_hang(struct ath10k *ar,
enum wmi_force_fw_hang_type type, u32 delay_ms);
+int ath10k_wmi_mgmt_tx(struct ath10k *ar, struct sk_buff *skb);
#endif /* _WMI_H_ */
--
1.7.10
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v2 09/13] ath10k: split wmi_cmd_init path
2013-09-26 9:29 [PATCH v2 00/13] ath10k: dual-firmware support (MAIN and 10.X) Bartosz Markowski
` (7 preceding siblings ...)
2013-09-26 9:29 ` [PATCH v2 08/13] ath10k: bring back the WMI path for mgmt frames Bartosz Markowski
@ 2013-09-26 9:29 ` Bartosz Markowski
2013-09-26 9:29 ` [PATCH v2 10/13] ath10k: add TARGET values for 10.x firmware Bartosz Markowski
` (4 subsequent siblings)
13 siblings, 0 replies; 17+ messages in thread
From: Bartosz Markowski @ 2013-09-26 9:29 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Bartosz Markowski
Due to API differences in initialization structures for
main and 10.x firmwares we need to split the wmi_init_cmd
and wmi_resource_config structures.
This will be usefull also when setting the correct TARGET values,
like: number of peers, vdevs, pdevs etc.
Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
---
drivers/net/wireless/ath/ath10k/wmi.c | 105 +++++++++++++++++-
drivers/net/wireless/ath/ath10k/wmi.h | 195 +++++++++++++++++++++++++++++++++
2 files changed, 299 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 422033a..c81a8b7 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -1908,7 +1908,7 @@ int ath10k_wmi_pdev_set_param(struct ath10k *ar, enum wmi_pdev_param id,
return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->pdev_set_param_cmdid);
}
-int ath10k_wmi_cmd_init(struct ath10k *ar)
+static int ath10k_wmi_main_cmd_init(struct ath10k *ar)
{
struct wmi_init_cmd *cmd;
struct sk_buff *buf;
@@ -2007,6 +2007,109 @@ out:
return ath10k_wmi_cmd_send(ar, buf, ar->wmi.cmd->init_cmdid);
}
+static int ath10k_wmi_10x_cmd_init(struct ath10k *ar)
+{
+ struct wmi_init_cmd_10x *cmd;
+ struct sk_buff *buf;
+ struct wmi_resource_config_10x config = {};
+ u32 len, val;
+ int i;
+
+ config.num_vdevs = __cpu_to_le32(TARGET_NUM_VDEVS);
+ config.num_peers = __cpu_to_le32(TARGET_NUM_PEERS + TARGET_NUM_VDEVS);
+ config.num_peer_keys = __cpu_to_le32(TARGET_NUM_PEER_KEYS);
+ config.num_tids = __cpu_to_le32(TARGET_NUM_TIDS);
+ config.ast_skid_limit = __cpu_to_le32(TARGET_AST_SKID_LIMIT);
+ config.tx_chain_mask = __cpu_to_le32(TARGET_TX_CHAIN_MASK);
+ config.rx_chain_mask = __cpu_to_le32(TARGET_RX_CHAIN_MASK);
+ config.rx_timeout_pri_vo = __cpu_to_le32(TARGET_RX_TIMEOUT_LO_PRI);
+ config.rx_timeout_pri_vi = __cpu_to_le32(TARGET_RX_TIMEOUT_LO_PRI);
+ config.rx_timeout_pri_be = __cpu_to_le32(TARGET_RX_TIMEOUT_LO_PRI);
+ config.rx_timeout_pri_bk = __cpu_to_le32(TARGET_RX_TIMEOUT_HI_PRI);
+ config.rx_decap_mode = __cpu_to_le32(TARGET_RX_DECAP_MODE);
+
+ config.scan_max_pending_reqs =
+ __cpu_to_le32(TARGET_SCAN_MAX_PENDING_REQS);
+
+ config.bmiss_offload_max_vdev =
+ __cpu_to_le32(TARGET_BMISS_OFFLOAD_MAX_VDEV);
+
+ config.roam_offload_max_vdev =
+ __cpu_to_le32(TARGET_ROAM_OFFLOAD_MAX_VDEV);
+
+ config.roam_offload_max_ap_profiles =
+ __cpu_to_le32(TARGET_ROAM_OFFLOAD_MAX_AP_PROFILES);
+
+ config.num_mcast_groups = __cpu_to_le32(TARGET_NUM_MCAST_GROUPS);
+ config.num_mcast_table_elems =
+ __cpu_to_le32(TARGET_NUM_MCAST_TABLE_ELEMS);
+
+ config.mcast2ucast_mode = __cpu_to_le32(TARGET_MCAST2UCAST_MODE);
+ config.tx_dbg_log_size = __cpu_to_le32(TARGET_TX_DBG_LOG_SIZE);
+ config.num_wds_entries = __cpu_to_le32(TARGET_NUM_WDS_ENTRIES);
+ config.dma_burst_size = __cpu_to_le32(TARGET_DMA_BURST_SIZE);
+ config.mac_aggr_delim = __cpu_to_le32(TARGET_MAC_AGGR_DELIM);
+
+ val = TARGET_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK;
+ config.rx_skip_defrag_timeout_dup_detection_check = __cpu_to_le32(val);
+
+ config.vow_config = __cpu_to_le32(TARGET_VOW_CONFIG);
+
+ config.num_msdu_desc = __cpu_to_le32(TARGET_NUM_MSDU_DESC);
+ config.max_frag_entries = __cpu_to_le32(TARGET_MAX_FRAG_ENTRIES);
+
+ len = sizeof(*cmd) +
+ (sizeof(struct host_memory_chunk) * ar->wmi.num_mem_chunks);
+
+ buf = ath10k_wmi_alloc_skb(len);
+ if (!buf)
+ return -ENOMEM;
+
+ cmd = (struct wmi_init_cmd_10x *)buf->data;
+
+ if (ar->wmi.num_mem_chunks == 0) {
+ cmd->num_host_mem_chunks = 0;
+ goto out;
+ }
+
+ ath10k_dbg(ATH10K_DBG_WMI, "wmi sending %d memory chunks info.\n",
+ __cpu_to_le32(ar->wmi.num_mem_chunks));
+
+ cmd->num_host_mem_chunks = __cpu_to_le32(ar->wmi.num_mem_chunks);
+
+ for (i = 0; i < ar->wmi.num_mem_chunks; i++) {
+ cmd->host_mem_chunks[i].ptr =
+ __cpu_to_le32(ar->wmi.mem_chunks[i].paddr);
+ cmd->host_mem_chunks[i].size =
+ __cpu_to_le32(ar->wmi.mem_chunks[i].len);
+ cmd->host_mem_chunks[i].req_id =
+ __cpu_to_le32(ar->wmi.mem_chunks[i].req_id);
+
+ ath10k_dbg(ATH10K_DBG_WMI,
+ "wmi chunk %d len %d requested, addr 0x%x\n",
+ i,
+ cmd->host_mem_chunks[i].size,
+ cmd->host_mem_chunks[i].ptr);
+ }
+out:
+ memcpy(&cmd->resource_config, &config, sizeof(config));
+
+ ath10k_dbg(ATH10K_DBG_WMI, "wmi init 10x\n");
+ return ath10k_wmi_cmd_send(ar, buf, ar->wmi.cmd->init_cmdid);
+}
+
+int ath10k_wmi_cmd_init(struct ath10k *ar)
+{
+ int ret;
+
+ if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features))
+ ret = ath10k_wmi_10x_cmd_init(ar);
+ else
+ ret = ath10k_wmi_main_cmd_init(ar);
+
+ return ret;
+}
+
static int ath10k_wmi_start_scan_calc_len(const struct wmi_start_scan_arg *arg)
{
int len;
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 1c515d6..5383f7e 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -1377,6 +1377,189 @@ struct wmi_resource_config {
__le32 max_frag_entries;
} __packed;
+struct wmi_resource_config_10x {
+ /* number of virtual devices (VAPs) to support */
+ __le32 num_vdevs;
+
+ /* number of peer nodes to support */
+ __le32 num_peers;
+
+ /* number of keys per peer */
+ __le32 num_peer_keys;
+
+ /* total number of TX/RX data TIDs */
+ __le32 num_tids;
+
+ /*
+ * max skid for resolving hash collisions
+ *
+ * The address search table is sparse, so that if two MAC addresses
+ * result in the same hash value, the second of these conflicting
+ * entries can slide to the next index in the address search table,
+ * and use it, if it is unoccupied. This ast_skid_limit parameter
+ * specifies the upper bound on how many subsequent indices to search
+ * over to find an unoccupied space.
+ */
+ __le32 ast_skid_limit;
+
+ /*
+ * the nominal chain mask for transmit
+ *
+ * The chain mask may be modified dynamically, e.g. to operate AP
+ * tx with a reduced number of chains if no clients are associated.
+ * This configuration parameter specifies the nominal chain-mask that
+ * should be used when not operating with a reduced set of tx chains.
+ */
+ __le32 tx_chain_mask;
+
+ /*
+ * the nominal chain mask for receive
+ *
+ * The chain mask may be modified dynamically, e.g. for a client
+ * to use a reduced number of chains for receive if the traffic to
+ * the client is low enough that it doesn't require downlink MIMO
+ * or antenna diversity.
+ * This configuration parameter specifies the nominal chain-mask that
+ * should be used when not operating with a reduced set of rx chains.
+ */
+ __le32 rx_chain_mask;
+
+ /*
+ * what rx reorder timeout (ms) to use for the AC
+ *
+ * Each WMM access class (voice, video, best-effort, background) will
+ * have its own timeout value to dictate how long to wait for missing
+ * rx MPDUs to arrive before flushing subsequent MPDUs that have
+ * already been received.
+ * This parameter specifies the timeout in milliseconds for each
+ * class.
+ */
+ __le32 rx_timeout_pri_vi;
+ __le32 rx_timeout_pri_vo;
+ __le32 rx_timeout_pri_be;
+ __le32 rx_timeout_pri_bk;
+
+ /*
+ * what mode the rx should decap packets to
+ *
+ * MAC can decap to RAW (no decap), native wifi or Ethernet types
+ * THis setting also determines the default TX behavior, however TX
+ * behavior can be modified on a per VAP basis during VAP init
+ */
+ __le32 rx_decap_mode;
+
+ /* what is the maximum scan requests than can be queued */
+ __le32 scan_max_pending_reqs;
+
+ /* maximum VDEV that could use BMISS offload */
+ __le32 bmiss_offload_max_vdev;
+
+ /* maximum VDEV that could use offload roaming */
+ __le32 roam_offload_max_vdev;
+
+ /* maximum AP profiles that would push to offload roaming */
+ __le32 roam_offload_max_ap_profiles;
+
+ /*
+ * how many groups to use for mcast->ucast conversion
+ *
+ * The target's WAL maintains a table to hold information regarding
+ * which peers belong to a given multicast group, so that if
+ * multicast->unicast conversion is enabled, the target can convert
+ * multicast tx frames to a series of unicast tx frames, to each
+ * peer within the multicast group.
+ This num_mcast_groups configuration parameter tells the target how
+ * many multicast groups to provide storage for within its multicast
+ * group membership table.
+ */
+ __le32 num_mcast_groups;
+
+ /*
+ * size to alloc for the mcast membership table
+ *
+ * This num_mcast_table_elems configuration parameter tells the
+ * target how many peer elements it needs to provide storage for in
+ * its multicast group membership table.
+ * These multicast group membership table elements are shared by the
+ * multicast groups stored within the table.
+ */
+ __le32 num_mcast_table_elems;
+
+ /*
+ * whether/how to do multicast->unicast conversion
+ *
+ * This configuration parameter specifies whether the target should
+ * perform multicast --> unicast conversion on transmit, and if so,
+ * what to do if it finds no entries in its multicast group
+ * membership table for the multicast IP address in the tx frame.
+ * Configuration value:
+ * 0 -> Do not perform multicast to unicast conversion.
+ * 1 -> Convert multicast frames to unicast, if the IP multicast
+ * address from the tx frame is found in the multicast group
+ * membership table. If the IP multicast address is not found,
+ * drop the frame.
+ * 2 -> Convert multicast frames to unicast, if the IP multicast
+ * address from the tx frame is found in the multicast group
+ * membership table. If the IP multicast address is not found,
+ * transmit the frame as multicast.
+ */
+ __le32 mcast2ucast_mode;
+
+ /*
+ * how much memory to allocate for a tx PPDU dbg log
+ *
+ * This parameter controls how much memory the target will allocate
+ * to store a log of tx PPDU meta-information (how large the PPDU
+ * was, when it was sent, whether it was successful, etc.)
+ */
+ __le32 tx_dbg_log_size;
+
+ /* how many AST entries to be allocated for WDS */
+ __le32 num_wds_entries;
+
+ /*
+ * MAC DMA burst size, e.g., For target PCI limit can be
+ * 0 -default, 1 256B
+ */
+ __le32 dma_burst_size;
+
+ /*
+ * Fixed delimiters to be inserted after every MPDU to
+ * account for interface latency to avoid underrun.
+ */
+ __le32 mac_aggr_delim;
+
+ /*
+ * determine whether target is responsible for detecting duplicate
+ * non-aggregate MPDU and timing out stale fragments.
+ *
+ * A-MPDU reordering is always performed on the target.
+ *
+ * 0: target responsible for frag timeout and dup checking
+ * 1: host responsible for frag timeout and dup checking
+ */
+ __le32 rx_skip_defrag_timeout_dup_detection_check;
+
+ /*
+ * Configuration for VoW :
+ * No of Video Nodes to be supported
+ * and Max no of descriptors for each Video link (node).
+ */
+ __le32 vow_config;
+
+ /* Number of msdu descriptors target should use */
+ __le32 num_msdu_desc;
+
+ /*
+ * Max. number of Tx fragments per MSDU
+ * This parameter controls the max number of Tx fragments per MSDU.
+ * This is sent by the target as part of the WMI_SERVICE_READY event
+ * and is overriden by the OS shim as required.
+ */
+ __le32 max_frag_entries;
+} __packed;
+
+
#define NUM_UNITS_IS_NUM_VDEVS 0x1
#define NUM_UNITS_IS_NUM_PEERS 0x2
@@ -1401,6 +1584,18 @@ struct wmi_init_cmd {
struct host_memory_chunk host_mem_chunks[1];
} __packed;
+/* _10x stucture is from 10.X FW API */
+struct wmi_init_cmd_10x {
+ struct wmi_resource_config_10x resource_config;
+ __le32 num_host_mem_chunks;
+
+ /*
+ * variable number of host memory chunks.
+ * This should be the last element in the structure
+ */
+ struct host_memory_chunk host_mem_chunks[1];
+} __packed;
+
/* TLV for channel list */
struct wmi_chan_list {
__le32 tag; /* WMI_CHAN_LIST_TAG */
--
1.7.10
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v2 10/13] ath10k: add TARGET values for 10.x firmware
2013-09-26 9:29 [PATCH v2 00/13] ath10k: dual-firmware support (MAIN and 10.X) Bartosz Markowski
` (8 preceding siblings ...)
2013-09-26 9:29 ` [PATCH v2 09/13] ath10k: split wmi_cmd_init path Bartosz Markowski
@ 2013-09-26 9:29 ` Bartosz Markowski
2013-09-26 9:29 ` [PATCH v2 11/13] ath10k: introduce dynamic vdev parameters Bartosz Markowski
` (3 subsequent siblings)
13 siblings, 0 replies; 17+ messages in thread
From: Bartosz Markowski @ 2013-09-26 9:29 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Bartosz Markowski
Introduce all TARGET specific values for 10.x firmware.
Some of them are common for both firmwares we will support,
but to avoid confusion, define everything with prefix 10X_.
Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
---
drivers/net/wireless/ath/ath10k/hw.h | 31 ++++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi.c | 58 ++++++++++++++++-----------------
2 files changed, 60 insertions(+), 29 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 66e721a..2de13db 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -53,6 +53,7 @@ enum ath10k_mcast2ucast_mode {
ATH10K_MCAST2UCAST_ENABLED = 1,
};
+/* Target specific defines for MAIN firmware */
#define TARGET_NUM_VDEVS 8
#define TARGET_NUM_PEER_AST 2
#define TARGET_NUM_WDS_ENTRIES 32
@@ -87,6 +88,36 @@ enum ath10k_mcast2ucast_mode {
#define TARGET_NUM_MSDU_DESC (1024 + 400)
#define TARGET_MAX_FRAG_ENTRIES 0
+/* Target specific defines for 10.X firmware */
+#define TARGET_10X_NUM_VDEVS 16
+#define TARGET_10X_NUM_PEER_AST 2
+#define TARGET_10X_NUM_WDS_ENTRIES 32
+#define TARGET_10X_DMA_BURST_SIZE 0
+#define TARGET_10X_MAC_AGGR_DELIM 0
+#define TARGET_10X_AST_SKID_LIMIT 16
+#define TARGET_10X_NUM_PEERS (128 + (TARGET_10X_NUM_VDEVS))
+#define TARGET_10X_NUM_OFFLOAD_PEERS 0
+#define TARGET_10X_NUM_OFFLOAD_REORDER_BUFS 0
+#define TARGET_10X_NUM_PEER_KEYS 2
+#define TARGET_10X_NUM_TIDS 256
+#define TARGET_10X_TX_CHAIN_MASK (BIT(0) | BIT(1) | BIT(2))
+#define TARGET_10X_RX_CHAIN_MASK (BIT(0) | BIT(1) | BIT(2))
+#define TARGET_10X_RX_TIMEOUT_LO_PRI 100
+#define TARGET_10X_RX_TIMEOUT_HI_PRI 40
+#define TARGET_10X_RX_DECAP_MODE ATH10K_HW_TXRX_ETHERNET
+#define TARGET_10X_SCAN_MAX_PENDING_REQS 4
+#define TARGET_10X_BMISS_OFFLOAD_MAX_VDEV 2
+#define TARGET_10X_ROAM_OFFLOAD_MAX_VDEV 2
+#define TARGET_10X_ROAM_OFFLOAD_MAX_AP_PROFILES 8
+#define TARGET_10X_GTK_OFFLOAD_MAX_VDEV 3
+#define TARGET_10X_NUM_MCAST_GROUPS 0
+#define TARGET_10X_NUM_MCAST_TABLE_ELEMS 0
+#define TARGET_10X_MCAST2UCAST_MODE ATH10K_MCAST2UCAST_DISABLED
+#define TARGET_10X_TX_DBG_LOG_SIZE 1024
+#define TARGET_10X_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK 1
+#define TARGET_10X_VOW_CONFIG 0
+#define TARGET_10X_NUM_MSDU_DESC (1024 + 400)
+#define TARGET_10X_MAX_FRAG_ENTRIES 0
/* Number of Copy Engines supported */
#define CE_COUNT 8
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index c81a8b7..de50856 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -1450,9 +1450,9 @@ static void ath10k_wmi_10x_service_ready_event_rx(struct ath10k *ar,
* peers, 1 extra for self peer on target */
/* this needs to be tied, host and target
* can get out of sync */
- num_units = TARGET_NUM_PEERS + 1;
+ num_units = TARGET_10X_NUM_PEERS + 1;
else if (num_unit_info & NUM_UNITS_IS_NUM_VDEVS)
- num_units = TARGET_NUM_VDEVS + 1;
+ num_units = TARGET_10X_NUM_VDEVS + 1;
ath10k_dbg(ATH10K_DBG_WMI,
"wmi mem_req_id %d num_units %d num_unit_info %d unit size %d actual units %d\n",
@@ -2015,48 +2015,48 @@ static int ath10k_wmi_10x_cmd_init(struct ath10k *ar)
u32 len, val;
int i;
- config.num_vdevs = __cpu_to_le32(TARGET_NUM_VDEVS);
- config.num_peers = __cpu_to_le32(TARGET_NUM_PEERS + TARGET_NUM_VDEVS);
- config.num_peer_keys = __cpu_to_le32(TARGET_NUM_PEER_KEYS);
- config.num_tids = __cpu_to_le32(TARGET_NUM_TIDS);
- config.ast_skid_limit = __cpu_to_le32(TARGET_AST_SKID_LIMIT);
- config.tx_chain_mask = __cpu_to_le32(TARGET_TX_CHAIN_MASK);
- config.rx_chain_mask = __cpu_to_le32(TARGET_RX_CHAIN_MASK);
- config.rx_timeout_pri_vo = __cpu_to_le32(TARGET_RX_TIMEOUT_LO_PRI);
- config.rx_timeout_pri_vi = __cpu_to_le32(TARGET_RX_TIMEOUT_LO_PRI);
- config.rx_timeout_pri_be = __cpu_to_le32(TARGET_RX_TIMEOUT_LO_PRI);
- config.rx_timeout_pri_bk = __cpu_to_le32(TARGET_RX_TIMEOUT_HI_PRI);
- config.rx_decap_mode = __cpu_to_le32(TARGET_RX_DECAP_MODE);
+ config.num_vdevs = __cpu_to_le32(TARGET_10X_NUM_VDEVS);
+ config.num_peers = __cpu_to_le32(TARGET_10X_NUM_PEERS);
+ config.num_peer_keys = __cpu_to_le32(TARGET_10X_NUM_PEER_KEYS);
+ config.num_tids = __cpu_to_le32(TARGET_10X_NUM_TIDS);
+ config.ast_skid_limit = __cpu_to_le32(TARGET_10X_AST_SKID_LIMIT);
+ config.tx_chain_mask = __cpu_to_le32(TARGET_10X_TX_CHAIN_MASK);
+ config.rx_chain_mask = __cpu_to_le32(TARGET_10X_RX_CHAIN_MASK);
+ config.rx_timeout_pri_vo = __cpu_to_le32(TARGET_10X_RX_TIMEOUT_LO_PRI);
+ config.rx_timeout_pri_vi = __cpu_to_le32(TARGET_10X_RX_TIMEOUT_LO_PRI);
+ config.rx_timeout_pri_be = __cpu_to_le32(TARGET_10X_RX_TIMEOUT_LO_PRI);
+ config.rx_timeout_pri_bk = __cpu_to_le32(TARGET_10X_RX_TIMEOUT_HI_PRI);
+ config.rx_decap_mode = __cpu_to_le32(TARGET_10X_RX_DECAP_MODE);
config.scan_max_pending_reqs =
- __cpu_to_le32(TARGET_SCAN_MAX_PENDING_REQS);
+ __cpu_to_le32(TARGET_10X_SCAN_MAX_PENDING_REQS);
config.bmiss_offload_max_vdev =
- __cpu_to_le32(TARGET_BMISS_OFFLOAD_MAX_VDEV);
+ __cpu_to_le32(TARGET_10X_BMISS_OFFLOAD_MAX_VDEV);
config.roam_offload_max_vdev =
- __cpu_to_le32(TARGET_ROAM_OFFLOAD_MAX_VDEV);
+ __cpu_to_le32(TARGET_10X_ROAM_OFFLOAD_MAX_VDEV);
config.roam_offload_max_ap_profiles =
- __cpu_to_le32(TARGET_ROAM_OFFLOAD_MAX_AP_PROFILES);
+ __cpu_to_le32(TARGET_10X_ROAM_OFFLOAD_MAX_AP_PROFILES);
- config.num_mcast_groups = __cpu_to_le32(TARGET_NUM_MCAST_GROUPS);
+ config.num_mcast_groups = __cpu_to_le32(TARGET_10X_NUM_MCAST_GROUPS);
config.num_mcast_table_elems =
- __cpu_to_le32(TARGET_NUM_MCAST_TABLE_ELEMS);
+ __cpu_to_le32(TARGET_10X_NUM_MCAST_TABLE_ELEMS);
- config.mcast2ucast_mode = __cpu_to_le32(TARGET_MCAST2UCAST_MODE);
- config.tx_dbg_log_size = __cpu_to_le32(TARGET_TX_DBG_LOG_SIZE);
- config.num_wds_entries = __cpu_to_le32(TARGET_NUM_WDS_ENTRIES);
- config.dma_burst_size = __cpu_to_le32(TARGET_DMA_BURST_SIZE);
- config.mac_aggr_delim = __cpu_to_le32(TARGET_MAC_AGGR_DELIM);
+ config.mcast2ucast_mode = __cpu_to_le32(TARGET_10X_MCAST2UCAST_MODE);
+ config.tx_dbg_log_size = __cpu_to_le32(TARGET_10X_TX_DBG_LOG_SIZE);
+ config.num_wds_entries = __cpu_to_le32(TARGET_10X_NUM_WDS_ENTRIES);
+ config.dma_burst_size = __cpu_to_le32(TARGET_10X_DMA_BURST_SIZE);
+ config.mac_aggr_delim = __cpu_to_le32(TARGET_10X_MAC_AGGR_DELIM);
- val = TARGET_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK;
+ val = TARGET_10X_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK;
config.rx_skip_defrag_timeout_dup_detection_check = __cpu_to_le32(val);
- config.vow_config = __cpu_to_le32(TARGET_VOW_CONFIG);
+ config.vow_config = __cpu_to_le32(TARGET_10X_VOW_CONFIG);
- config.num_msdu_desc = __cpu_to_le32(TARGET_NUM_MSDU_DESC);
- config.max_frag_entries = __cpu_to_le32(TARGET_MAX_FRAG_ENTRIES);
+ config.num_msdu_desc = __cpu_to_le32(TARGET_10X_NUM_MSDU_DESC);
+ config.max_frag_entries = __cpu_to_le32(TARGET_10X_MAX_FRAG_ENTRIES);
len = sizeof(*cmd) +
(sizeof(struct host_memory_chunk) * ar->wmi.num_mem_chunks);
--
1.7.10
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v2 11/13] ath10k: introduce dynamic vdev parameters
2013-09-26 9:29 [PATCH v2 00/13] ath10k: dual-firmware support (MAIN and 10.X) Bartosz Markowski
` (9 preceding siblings ...)
2013-09-26 9:29 ` [PATCH v2 10/13] ath10k: add TARGET values for 10.x firmware Bartosz Markowski
@ 2013-09-26 9:29 ` Bartosz Markowski
2013-09-26 9:29 ` [PATCH v2 12/13] ath10k: introduce dynamic pdev parameters Bartosz Markowski
` (2 subsequent siblings)
13 siblings, 0 replies; 17+ messages in thread
From: Bartosz Markowski @ 2013-09-26 9:29 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Bartosz Markowski
Both firmwares (main and 10.x) have different set of vdev
parameters. To stay in sync with FW API, this patch introduces
a dynamic registering method.
ath10k_wmi_vdev_set_param() takes now indirect u32 value
to identify the Vdev parameter it want's to set.
Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
---
drivers/net/wireless/ath/ath10k/core.h | 1 +
drivers/net/wireless/ath/ath10k/mac.c | 55 +++++-----
drivers/net/wireless/ath/ath10k/wmi.c | 129 +++++++++++++++++++++++-
drivers/net/wireless/ath/ath10k/wmi.h | 172 +++++++++++++++++++++++++++++++-
4 files changed, 332 insertions(+), 25 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 984db11..124e724 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -119,6 +119,7 @@ struct ath10k_wmi {
struct completion unified_ready;
wait_queue_head_t tx_credits_wq;
struct wmi_cmd_map *cmd;
+ struct wmi_vdev_param_map *vdev_param;
u32 num_mem_chunks;
struct ath10k_mem_chunk mem_chunks[ATH10K_MAX_MEM_REQS];
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index cadf90d..d8aba57 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -334,25 +334,29 @@ static int ath10k_peer_create(struct ath10k *ar, u32 vdev_id, const u8 *addr)
static int ath10k_mac_set_rts(struct ath10k_vif *arvif, u32 value)
{
+ struct ath10k *ar = arvif->ar;
+ u32 vdev_param;
+
if (value != 0xFFFFFFFF)
value = min_t(u32, arvif->ar->hw->wiphy->rts_threshold,
ATH10K_RTS_MAX);
- return ath10k_wmi_vdev_set_param(arvif->ar, arvif->vdev_id,
- WMI_VDEV_PARAM_RTS_THRESHOLD,
- value);
+ vdev_param = ar->wmi.vdev_param->rts_threshold;
+ return ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, value);
}
static int ath10k_mac_set_frag(struct ath10k_vif *arvif, u32 value)
{
+ struct ath10k *ar = arvif->ar;
+ u32 vdev_param;
+
if (value != 0xFFFFFFFF)
value = clamp_t(u32, arvif->ar->hw->wiphy->frag_threshold,
ATH10K_FRAGMT_THRESHOLD_MIN,
ATH10K_FRAGMT_THRESHOLD_MAX);
- return ath10k_wmi_vdev_set_param(arvif->ar, arvif->vdev_id,
- WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
- value);
+ vdev_param = ar->wmi.vdev_param->fragmentation_threshold;
+ return ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, value);
}
static int ath10k_peer_delete(struct ath10k *ar, u32 vdev_id, const u8 *addr)
@@ -677,6 +681,7 @@ static void ath10k_control_ibss(struct ath10k_vif *arvif,
struct ieee80211_bss_conf *info,
const u8 self_peer[ETH_ALEN])
{
+ u32 vdev_param;
int ret = 0;
lockdep_assert_held(&arvif->ar->conf_mutex);
@@ -710,8 +715,8 @@ static void ath10k_control_ibss(struct ath10k_vif *arvif,
return;
}
- ret = ath10k_wmi_vdev_set_param(arvif->ar, arvif->vdev_id,
- WMI_VDEV_PARAM_ATIM_WINDOW,
+ vdev_param = arvif->ar->wmi.vdev_param->atim_window;
+ ret = ath10k_wmi_vdev_set_param(arvif->ar, arvif->vdev_id, vdev_param,
ATH10K_DEFAULT_ATIM);
if (ret)
ath10k_warn("Failed to set IBSS ATIM for VDEV:%d ret:%d\n",
@@ -1433,6 +1438,7 @@ static void ath10k_tx_h_update_wep_key(struct sk_buff *skb)
struct ath10k *ar = arvif->ar;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
struct ieee80211_key_conf *key = info->control.hw_key;
+ u32 vdev_param;
int ret;
if (!ieee80211_has_protected(hdr->frame_control))
@@ -1451,8 +1457,8 @@ static void ath10k_tx_h_update_wep_key(struct sk_buff *skb)
ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d keyidx %d\n",
arvif->vdev_id, key->keyidx);
- ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
- WMI_VDEV_PARAM_DEF_KEYID,
+ vdev_param = ar->wmi.vdev_param->def_keyid;
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
key->keyidx);
if (ret) {
ath10k_warn("could not update wep keyidx (%d)\n", ret);
@@ -1986,6 +1992,7 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
int ret = 0;
u32 value;
int bit;
+ u32 vdev_param;
mutex_lock(&ar->conf_mutex);
@@ -2047,13 +2054,14 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
goto exit;
}
- ret = ath10k_wmi_vdev_set_param(ar, 0, WMI_VDEV_PARAM_DEF_KEYID,
+ vdev_param = ar->wmi.vdev_param->def_keyid;
+ ret = ath10k_wmi_vdev_set_param(ar, 0, vdev_param,
arvif->def_wep_key_index);
if (ret)
ath10k_warn("Failed to set default keyid: %d\n", ret);
- ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
- WMI_VDEV_PARAM_TX_ENCAP_TYPE,
+ vdev_param = ar->wmi.vdev_param->tx_encap_type;
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
ATH10K_HW_TXRX_NATIVE_WIFI);
if (ret)
ath10k_warn("Failed to set TX encap: %d\n", ret);
@@ -2204,6 +2212,7 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
struct ath10k *ar = hw->priv;
struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
int ret = 0;
+ u32 vdev_param;
mutex_lock(&ar->conf_mutex);
@@ -2212,8 +2221,8 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
if (changed & BSS_CHANGED_BEACON_INT) {
arvif->beacon_interval = info->beacon_int;
- ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
- WMI_VDEV_PARAM_BEACON_INTERVAL,
+ vdev_param = ar->wmi.vdev_param->beacon_interval;
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
arvif->beacon_interval);
ath10k_dbg(ATH10K_DBG_MAC,
"mac vdev %d beacon_interval %d\n",
@@ -2244,8 +2253,8 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
"mac vdev %d dtim_period %d\n",
arvif->vdev_id, arvif->dtim_period);
- ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
- WMI_VDEV_PARAM_DTIM_PERIOD,
+ vdev_param = ar->wmi.vdev_param->dtim_period;
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
arvif->dtim_period);
if (ret)
ath10k_warn("Failed to set dtim period for VDEV: %d\n",
@@ -2312,8 +2321,8 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d cts_prot %d\n",
arvif->vdev_id, cts_prot);
- ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
- WMI_VDEV_PARAM_ENABLE_RTSCTS,
+ vdev_param = ar->wmi.vdev_param->enable_rtscts;
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
cts_prot);
if (ret)
ath10k_warn("Failed to set CTS prot for VDEV: %d\n",
@@ -2331,8 +2340,8 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d slot_time %d\n",
arvif->vdev_id, slottime);
- ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
- WMI_VDEV_PARAM_SLOT_TIME,
+ vdev_param = ar->wmi.vdev_param->slot_time;
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
slottime);
if (ret)
ath10k_warn("Failed to set erp slot for VDEV: %d\n",
@@ -2350,8 +2359,8 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
"mac vdev %d preamble %dn",
arvif->vdev_id, preamble);
- ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
- WMI_VDEV_PARAM_PREAMBLE,
+ vdev_param = ar->wmi.vdev_param->preamble;
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
preamble);
if (ret)
ath10k_warn("Failed to set preamble for VDEV: %d\n",
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index de50856..a6bd87e 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -265,6 +265,124 @@ static struct wmi_cmd_map wmi_10x_cmd_map = {
.gpio_output_cmdid = WMI_10X_GPIO_OUTPUT_CMDID,
};
+/* MAIN WMI VDEV param map */
+static struct wmi_vdev_param_map wmi_vdev_param_map = {
+ .rts_threshold = WMI_VDEV_PARAM_RTS_THRESHOLD,
+ .fragmentation_threshold = WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
+ .beacon_interval = WMI_VDEV_PARAM_BEACON_INTERVAL,
+ .listen_interval = WMI_VDEV_PARAM_LISTEN_INTERVAL,
+ .multicast_rate = WMI_VDEV_PARAM_MULTICAST_RATE,
+ .mgmt_tx_rate = WMI_VDEV_PARAM_MGMT_TX_RATE,
+ .slot_time = WMI_VDEV_PARAM_SLOT_TIME,
+ .preamble = WMI_VDEV_PARAM_PREAMBLE,
+ .swba_time = WMI_VDEV_PARAM_SWBA_TIME,
+ .wmi_vdev_stats_update_period = WMI_VDEV_STATS_UPDATE_PERIOD,
+ .wmi_vdev_pwrsave_ageout_time = WMI_VDEV_PWRSAVE_AGEOUT_TIME,
+ .wmi_vdev_host_swba_interval = WMI_VDEV_HOST_SWBA_INTERVAL,
+ .dtim_period = WMI_VDEV_PARAM_DTIM_PERIOD,
+ .wmi_vdev_oc_scheduler_air_time_limit =
+ WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
+ .wds = WMI_VDEV_PARAM_WDS,
+ .atim_window = WMI_VDEV_PARAM_ATIM_WINDOW,
+ .bmiss_count_max = WMI_VDEV_PARAM_BMISS_COUNT_MAX,
+ .bmiss_first_bcnt = WMI_VDEV_PARAM_BMISS_FIRST_BCNT,
+ .bmiss_final_bcnt = WMI_VDEV_PARAM_BMISS_FINAL_BCNT,
+ .feature_wmm = WMI_VDEV_PARAM_FEATURE_WMM,
+ .chwidth = WMI_VDEV_PARAM_CHWIDTH,
+ .chextoffset = WMI_VDEV_PARAM_CHEXTOFFSET,
+ .disable_htprotection = WMI_VDEV_PARAM_DISABLE_HTPROTECTION,
+ .sta_quickkickout = WMI_VDEV_PARAM_STA_QUICKKICKOUT,
+ .mgmt_rate = WMI_VDEV_PARAM_MGMT_RATE,
+ .protection_mode = WMI_VDEV_PARAM_PROTECTION_MODE,
+ .fixed_rate = WMI_VDEV_PARAM_FIXED_RATE,
+ .sgi = WMI_VDEV_PARAM_SGI,
+ .ldpc = WMI_VDEV_PARAM_LDPC,
+ .tx_stbc = WMI_VDEV_PARAM_TX_STBC,
+ .rx_stbc = WMI_VDEV_PARAM_RX_STBC,
+ .intra_bss_fwd = WMI_VDEV_PARAM_INTRA_BSS_FWD,
+ .def_keyid = WMI_VDEV_PARAM_DEF_KEYID,
+ .nss = WMI_VDEV_PARAM_NSS,
+ .bcast_data_rate = WMI_VDEV_PARAM_BCAST_DATA_RATE,
+ .mcast_data_rate = WMI_VDEV_PARAM_MCAST_DATA_RATE,
+ .mcast_indicate = WMI_VDEV_PARAM_MCAST_INDICATE,
+ .dhcp_indicate = WMI_VDEV_PARAM_DHCP_INDICATE,
+ .unknown_dest_indicate = WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
+ .ap_keepalive_min_idle_inactive_time_secs =
+ WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
+ .ap_keepalive_max_idle_inactive_time_secs =
+ WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
+ .ap_keepalive_max_unresponsive_time_secs =
+ WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
+ .ap_enable_nawds = WMI_VDEV_PARAM_AP_ENABLE_NAWDS,
+ .mcast2ucast_set = WMI_VDEV_PARAM_UNSUPPORTED,
+ .enable_rtscts = WMI_VDEV_PARAM_ENABLE_RTSCTS,
+ .txbf = WMI_VDEV_PARAM_TXBF,
+ .packet_powersave = WMI_VDEV_PARAM_PACKET_POWERSAVE,
+ .drop_unencry = WMI_VDEV_PARAM_DROP_UNENCRY,
+ .tx_encap_type = WMI_VDEV_PARAM_TX_ENCAP_TYPE,
+ .ap_detect_out_of_sync_sleeping_sta_time_secs =
+ WMI_VDEV_PARAM_UNSUPPORTED,
+};
+
+/* 10.X WMI VDEV param map */
+static struct wmi_vdev_param_map wmi_10x_vdev_param_map = {
+ .rts_threshold = WMI_10X_VDEV_PARAM_RTS_THRESHOLD,
+ .fragmentation_threshold = WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
+ .beacon_interval = WMI_10X_VDEV_PARAM_BEACON_INTERVAL,
+ .listen_interval = WMI_10X_VDEV_PARAM_LISTEN_INTERVAL,
+ .multicast_rate = WMI_10X_VDEV_PARAM_MULTICAST_RATE,
+ .mgmt_tx_rate = WMI_10X_VDEV_PARAM_MGMT_TX_RATE,
+ .slot_time = WMI_10X_VDEV_PARAM_SLOT_TIME,
+ .preamble = WMI_10X_VDEV_PARAM_PREAMBLE,
+ .swba_time = WMI_10X_VDEV_PARAM_SWBA_TIME,
+ .wmi_vdev_stats_update_period = WMI_10X_VDEV_STATS_UPDATE_PERIOD,
+ .wmi_vdev_pwrsave_ageout_time = WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME,
+ .wmi_vdev_host_swba_interval = WMI_10X_VDEV_HOST_SWBA_INTERVAL,
+ .dtim_period = WMI_10X_VDEV_PARAM_DTIM_PERIOD,
+ .wmi_vdev_oc_scheduler_air_time_limit =
+ WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
+ .wds = WMI_10X_VDEV_PARAM_WDS,
+ .atim_window = WMI_10X_VDEV_PARAM_ATIM_WINDOW,
+ .bmiss_count_max = WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX,
+ .bmiss_first_bcnt = WMI_VDEV_PARAM_UNSUPPORTED,
+ .bmiss_final_bcnt = WMI_VDEV_PARAM_UNSUPPORTED,
+ .feature_wmm = WMI_10X_VDEV_PARAM_FEATURE_WMM,
+ .chwidth = WMI_10X_VDEV_PARAM_CHWIDTH,
+ .chextoffset = WMI_10X_VDEV_PARAM_CHEXTOFFSET,
+ .disable_htprotection = WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION,
+ .sta_quickkickout = WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT,
+ .mgmt_rate = WMI_10X_VDEV_PARAM_MGMT_RATE,
+ .protection_mode = WMI_10X_VDEV_PARAM_PROTECTION_MODE,
+ .fixed_rate = WMI_10X_VDEV_PARAM_FIXED_RATE,
+ .sgi = WMI_10X_VDEV_PARAM_SGI,
+ .ldpc = WMI_10X_VDEV_PARAM_LDPC,
+ .tx_stbc = WMI_10X_VDEV_PARAM_TX_STBC,
+ .rx_stbc = WMI_10X_VDEV_PARAM_RX_STBC,
+ .intra_bss_fwd = WMI_10X_VDEV_PARAM_INTRA_BSS_FWD,
+ .def_keyid = WMI_10X_VDEV_PARAM_DEF_KEYID,
+ .nss = WMI_10X_VDEV_PARAM_NSS,
+ .bcast_data_rate = WMI_10X_VDEV_PARAM_BCAST_DATA_RATE,
+ .mcast_data_rate = WMI_10X_VDEV_PARAM_MCAST_DATA_RATE,
+ .mcast_indicate = WMI_10X_VDEV_PARAM_MCAST_INDICATE,
+ .dhcp_indicate = WMI_10X_VDEV_PARAM_DHCP_INDICATE,
+ .unknown_dest_indicate = WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
+ .ap_keepalive_min_idle_inactive_time_secs =
+ WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
+ .ap_keepalive_max_idle_inactive_time_secs =
+ WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
+ .ap_keepalive_max_unresponsive_time_secs =
+ WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
+ .ap_enable_nawds = WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS,
+ .mcast2ucast_set = WMI_10X_VDEV_PARAM_MCAST2UCAST_SET,
+ .enable_rtscts = WMI_10X_VDEV_PARAM_ENABLE_RTSCTS,
+ .txbf = WMI_VDEV_PARAM_UNSUPPORTED,
+ .packet_powersave = WMI_VDEV_PARAM_UNSUPPORTED,
+ .drop_unencry = WMI_VDEV_PARAM_UNSUPPORTED,
+ .tx_encap_type = WMI_VDEV_PARAM_UNSUPPORTED,
+ .ap_detect_out_of_sync_sleeping_sta_time_secs =
+ WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
+};
+
int ath10k_wmi_wait_for_service_ready(struct ath10k *ar)
{
int ret;
@@ -1751,9 +1869,11 @@ int ath10k_wmi_attach(struct ath10k *ar)
if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features)) {
ath10k_warn("Firmware 10.X is not yet supported\n");
ar->wmi.cmd = &wmi_10x_cmd_map;
+ ar->wmi.vdev_param = &wmi_10x_vdev_param_map;
ret = -ENOTSUPP;
} else {
ar->wmi.cmd = &wmi_cmd_map;
+ ar->wmi.vdev_param = &wmi_vdev_param_map;
ret = 0;
}
@@ -2516,11 +2636,18 @@ int ath10k_wmi_vdev_down(struct ath10k *ar, u32 vdev_id)
}
int ath10k_wmi_vdev_set_param(struct ath10k *ar, u32 vdev_id,
- enum wmi_vdev_param param_id, u32 param_value)
+ u32 param_id, u32 param_value)
{
struct wmi_vdev_set_param_cmd *cmd;
struct sk_buff *skb;
+ if (param_id == WMI_VDEV_PARAM_UNSUPPORTED) {
+ ath10k_dbg(ATH10K_DBG_WMI,
+ "vdev param %d not supported by firmware\n",
+ param_id);
+ return -EINVAL;
+ }
+
skb = ath10k_wmi_alloc_skb(sizeof(*cmd));
if (!skb)
return -ENOMEM;
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 5383f7e..1518586 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -2695,6 +2695,61 @@ enum wmi_rate_preamble {
/* Value to disable fixed rate setting */
#define WMI_FIXED_RATE_NONE (0xff)
+struct wmi_vdev_param_map {
+ u32 rts_threshold;
+ u32 fragmentation_threshold;
+ u32 beacon_interval;
+ u32 listen_interval;
+ u32 multicast_rate;
+ u32 mgmt_tx_rate;
+ u32 slot_time;
+ u32 preamble;
+ u32 swba_time;
+ u32 wmi_vdev_stats_update_period;
+ u32 wmi_vdev_pwrsave_ageout_time;
+ u32 wmi_vdev_host_swba_interval;
+ u32 dtim_period;
+ u32 wmi_vdev_oc_scheduler_air_time_limit;
+ u32 wds;
+ u32 atim_window;
+ u32 bmiss_count_max;
+ u32 bmiss_first_bcnt;
+ u32 bmiss_final_bcnt;
+ u32 feature_wmm;
+ u32 chwidth;
+ u32 chextoffset;
+ u32 disable_htprotection;
+ u32 sta_quickkickout;
+ u32 mgmt_rate;
+ u32 protection_mode;
+ u32 fixed_rate;
+ u32 sgi;
+ u32 ldpc;
+ u32 tx_stbc;
+ u32 rx_stbc;
+ u32 intra_bss_fwd;
+ u32 def_keyid;
+ u32 nss;
+ u32 bcast_data_rate;
+ u32 mcast_data_rate;
+ u32 mcast_indicate;
+ u32 dhcp_indicate;
+ u32 unknown_dest_indicate;
+ u32 ap_keepalive_min_idle_inactive_time_secs;
+ u32 ap_keepalive_max_idle_inactive_time_secs;
+ u32 ap_keepalive_max_unresponsive_time_secs;
+ u32 ap_enable_nawds;
+ u32 mcast2ucast_set;
+ u32 enable_rtscts;
+ u32 txbf;
+ u32 packet_powersave;
+ u32 drop_unencry;
+ u32 tx_encap_type;
+ u32 ap_detect_out_of_sync_sleeping_sta_time_secs;
+};
+
+#define WMI_VDEV_PARAM_UNSUPPORTED 0
+
/* the definition of different VDEV parameters */
enum wmi_vdev_param {
/* RTS Threshold */
@@ -2826,6 +2881,121 @@ enum wmi_vdev_param {
WMI_VDEV_PARAM_TX_ENCAP_TYPE,
};
+/* the definition of different VDEV parameters */
+enum wmi_10x_vdev_param {
+ /* RTS Threshold */
+ WMI_10X_VDEV_PARAM_RTS_THRESHOLD = 0x1,
+ /* Fragmentation threshold */
+ WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
+ /* beacon interval in TUs */
+ WMI_10X_VDEV_PARAM_BEACON_INTERVAL,
+ /* Listen interval in TUs */
+ WMI_10X_VDEV_PARAM_LISTEN_INTERVAL,
+ /* muticast rate in Mbps */
+ WMI_10X_VDEV_PARAM_MULTICAST_RATE,
+ /* management frame rate in Mbps */
+ WMI_10X_VDEV_PARAM_MGMT_TX_RATE,
+ /* slot time (long vs short) */
+ WMI_10X_VDEV_PARAM_SLOT_TIME,
+ /* preamble (long vs short) */
+ WMI_10X_VDEV_PARAM_PREAMBLE,
+ /* SWBA time (time before tbtt in msec) */
+ WMI_10X_VDEV_PARAM_SWBA_TIME,
+ /* time period for updating VDEV stats */
+ WMI_10X_VDEV_STATS_UPDATE_PERIOD,
+ /* age out time in msec for frames queued for station in power save */
+ WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME,
+ /*
+ * Host SWBA interval (time in msec before tbtt for SWBA event
+ * generation).
+ */
+ WMI_10X_VDEV_HOST_SWBA_INTERVAL,
+ /* DTIM period (specified in units of num beacon intervals) */
+ WMI_10X_VDEV_PARAM_DTIM_PERIOD,
+ /*
+ * scheduler air time limit for this VDEV. used by off chan
+ * scheduler.
+ */
+ WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
+ /* enable/dsiable WDS for this VDEV */
+ WMI_10X_VDEV_PARAM_WDS,
+ /* ATIM Window */
+ WMI_10X_VDEV_PARAM_ATIM_WINDOW,
+ /* BMISS max */
+ WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX,
+ /* WMM enables/disabled */
+ WMI_10X_VDEV_PARAM_FEATURE_WMM,
+ /* Channel width */
+ WMI_10X_VDEV_PARAM_CHWIDTH,
+ /* Channel Offset */
+ WMI_10X_VDEV_PARAM_CHEXTOFFSET,
+ /* Disable HT Protection */
+ WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION,
+ /* Quick STA Kickout */
+ WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT,
+ /* Rate to be used with Management frames */
+ WMI_10X_VDEV_PARAM_MGMT_RATE,
+ /* Protection Mode */
+ WMI_10X_VDEV_PARAM_PROTECTION_MODE,
+ /* Fixed rate setting */
+ WMI_10X_VDEV_PARAM_FIXED_RATE,
+ /* Short GI Enable/Disable */
+ WMI_10X_VDEV_PARAM_SGI,
+ /* Enable LDPC */
+ WMI_10X_VDEV_PARAM_LDPC,
+ /* Enable Tx STBC */
+ WMI_10X_VDEV_PARAM_TX_STBC,
+ /* Enable Rx STBC */
+ WMI_10X_VDEV_PARAM_RX_STBC,
+ /* Intra BSS forwarding */
+ WMI_10X_VDEV_PARAM_INTRA_BSS_FWD,
+ /* Setting Default xmit key for Vdev */
+ WMI_10X_VDEV_PARAM_DEF_KEYID,
+ /* NSS width */
+ WMI_10X_VDEV_PARAM_NSS,
+ /* Set the custom rate for the broadcast data frames */
+ WMI_10X_VDEV_PARAM_BCAST_DATA_RATE,
+ /* Set the custom rate (rate-code) for multicast data frames */
+ WMI_10X_VDEV_PARAM_MCAST_DATA_RATE,
+ /* Tx multicast packet indicate Enable/Disable */
+ WMI_10X_VDEV_PARAM_MCAST_INDICATE,
+ /* Tx DHCP packet indicate Enable/Disable */
+ WMI_10X_VDEV_PARAM_DHCP_INDICATE,
+ /* Enable host inspection of Tx unicast packet to unknown destination */
+ WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
+
+ /* The minimum amount of time AP begins to consider STA inactive */
+ WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
+
+ /*
+ * An associated STA is considered inactive when there is no recent
+ * TX/RX activity and no downlink frames are buffered for it. Once a
+ * STA exceeds the maximum idle inactive time, the AP will send an
+ * 802.11 data-null as a keep alive to verify the STA is still
+ * associated. If the STA does ACK the data-null, or if the data-null
+ * is buffered and the STA does not retrieve it, the STA will be
+ * considered unresponsive
+ * (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).
+ */
+ WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
+
+ /*
+ * An associated STA is considered unresponsive if there is no recent
+ * TX/RX activity and downlink frames are buffered for it. Once a STA
+ * exceeds the maximum unresponsive time, the AP will send a
+ * WMI_10X_STA_KICKOUT event to the host so the STA can be deleted. */
+ WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
+
+ /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
+ WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS,
+
+ WMI_10X_VDEV_PARAM_MCAST2UCAST_SET,
+ /* Enable/Disable RTS-CTS */
+ WMI_10X_VDEV_PARAM_ENABLE_RTSCTS,
+
+ WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
+};
+
/* slot time long */
#define WMI_VDEV_SLOT_TIME_LONG 0x1
/* slot time short */
@@ -3648,7 +3818,7 @@ int ath10k_wmi_vdev_up(struct ath10k *ar, u32 vdev_id, u32 aid,
const u8 *bssid);
int ath10k_wmi_vdev_down(struct ath10k *ar, u32 vdev_id);
int ath10k_wmi_vdev_set_param(struct ath10k *ar, u32 vdev_id,
- enum wmi_vdev_param param_id, u32 param_value);
+ u32 param_id, u32 param_value);
int ath10k_wmi_vdev_install_key(struct ath10k *ar,
const struct wmi_vdev_install_key_arg *arg);
int ath10k_wmi_peer_create(struct ath10k *ar, u32 vdev_id,
--
1.7.10
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v2 12/13] ath10k: introduce dynamic pdev parameters
2013-09-26 9:29 [PATCH v2 00/13] ath10k: dual-firmware support (MAIN and 10.X) Bartosz Markowski
` (10 preceding siblings ...)
2013-09-26 9:29 ` [PATCH v2 11/13] ath10k: introduce dynamic vdev parameters Bartosz Markowski
@ 2013-09-26 9:29 ` Bartosz Markowski
2013-09-26 9:29 ` [PATCH v2 13/13] ath10k: handle FW API differences for scan structures Bartosz Markowski
2013-09-26 13:05 ` [PATCH v2 00/13] ath10k: dual-firmware support (MAIN and 10.X) Kalle Valo
13 siblings, 0 replies; 17+ messages in thread
From: Bartosz Markowski @ 2013-09-26 9:29 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Bartosz Markowski
This is done exactly the same way as for vdev.
Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
---
drivers/net/wireless/ath/ath10k/core.h | 1 +
drivers/net/wireless/ath/ath10k/mac.c | 10 +--
drivers/net/wireless/ath/ath10k/wmi.c | 115 ++++++++++++++++++++++++-
drivers/net/wireless/ath/ath10k/wmi.h | 148 +++++++++++++++++++++++++++++++-
4 files changed, 265 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 124e724..d5da8a9 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -120,6 +120,7 @@ struct ath10k_wmi {
wait_queue_head_t tx_credits_wq;
struct wmi_cmd_map *cmd;
struct wmi_vdev_param_map *vdev_param;
+ struct wmi_pdev_param_map *pdev_param;
u32 num_mem_chunks;
struct ath10k_mem_chunk mem_chunks[ATH10K_MAX_MEM_REQS];
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index d8aba57..0b7e9ac 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1885,12 +1885,12 @@ static int ath10k_start(struct ieee80211_hw *hw)
else if (ar->state == ATH10K_STATE_RESTARTING)
ar->state = ATH10K_STATE_RESTARTED;
- ret = ath10k_wmi_pdev_set_param(ar, WMI_PDEV_PARAM_PMF_QOS, 1);
+ ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->pmf_qos, 1);
if (ret)
ath10k_warn("could not enable WMI_PDEV_PARAM_PMF_QOS (%d)\n",
ret);
- ret = ath10k_wmi_pdev_set_param(ar, WMI_PDEV_PARAM_DYNAMIC_BW, 0);
+ ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->dynamic_bw, 0);
if (ret)
ath10k_warn("could not init WMI_PDEV_PARAM_DYNAMIC_BW (%d)\n",
ret);
@@ -2212,7 +2212,7 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
struct ath10k *ar = hw->priv;
struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
int ret = 0;
- u32 vdev_param;
+ u32 vdev_param, pdev_param;
mutex_lock(&ar->conf_mutex);
@@ -2238,8 +2238,8 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
"vdev %d set beacon tx mode to staggered\n",
arvif->vdev_id);
- ret = ath10k_wmi_pdev_set_param(ar,
- WMI_PDEV_PARAM_BEACON_TX_MODE,
+ pdev_param = ar->wmi.pdev_param->beacon_tx_mode;
+ ret = ath10k_wmi_pdev_set_param(ar, pdev_param,
WMI_BEACON_STAGGERED_MODE);
if (ret)
ath10k_warn("Failed to set beacon mode for VDEV: %d\n",
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index a6bd87e..8c3316d 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -383,6 +383,111 @@ static struct wmi_vdev_param_map wmi_10x_vdev_param_map = {
WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
};
+static struct wmi_pdev_param_map wmi_pdev_param_map = {
+ .tx_chain_mask = WMI_PDEV_PARAM_TX_CHAIN_MASK,
+ .rx_chain_mask = WMI_PDEV_PARAM_RX_CHAIN_MASK,
+ .txpower_limit2g = WMI_PDEV_PARAM_TXPOWER_LIMIT2G,
+ .txpower_limit5g = WMI_PDEV_PARAM_TXPOWER_LIMIT5G,
+ .txpower_scale = WMI_PDEV_PARAM_TXPOWER_SCALE,
+ .beacon_gen_mode = WMI_PDEV_PARAM_BEACON_GEN_MODE,
+ .beacon_tx_mode = WMI_PDEV_PARAM_BEACON_TX_MODE,
+ .resmgr_offchan_mode = WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
+ .protection_mode = WMI_PDEV_PARAM_PROTECTION_MODE,
+ .dynamic_bw = WMI_PDEV_PARAM_DYNAMIC_BW,
+ .non_agg_sw_retry_th = WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
+ .agg_sw_retry_th = WMI_PDEV_PARAM_AGG_SW_RETRY_TH,
+ .sta_kickout_th = WMI_PDEV_PARAM_STA_KICKOUT_TH,
+ .ac_aggrsize_scaling = WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING,
+ .ltr_enable = WMI_PDEV_PARAM_LTR_ENABLE,
+ .ltr_ac_latency_be = WMI_PDEV_PARAM_LTR_AC_LATENCY_BE,
+ .ltr_ac_latency_bk = WMI_PDEV_PARAM_LTR_AC_LATENCY_BK,
+ .ltr_ac_latency_vi = WMI_PDEV_PARAM_LTR_AC_LATENCY_VI,
+ .ltr_ac_latency_vo = WMI_PDEV_PARAM_LTR_AC_LATENCY_VO,
+ .ltr_ac_latency_timeout = WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
+ .ltr_sleep_override = WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
+ .ltr_rx_override = WMI_PDEV_PARAM_LTR_RX_OVERRIDE,
+ .ltr_tx_activity_timeout = WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
+ .l1ss_enable = WMI_PDEV_PARAM_L1SS_ENABLE,
+ .dsleep_enable = WMI_PDEV_PARAM_DSLEEP_ENABLE,
+ .pcielp_txbuf_flush = WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
+ .pcielp_txbuf_watermark = WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
+ .pcielp_txbuf_tmo_en = WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
+ .pcielp_txbuf_tmo_value = WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
+ .pdev_stats_update_period = WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
+ .vdev_stats_update_period = WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
+ .peer_stats_update_period = WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
+ .bcnflt_stats_update_period = WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
+ .pmf_qos = WMI_PDEV_PARAM_PMF_QOS,
+ .arp_ac_override = WMI_PDEV_PARAM_ARP_AC_OVERRIDE,
+ .arpdhcp_ac_override = WMI_PDEV_PARAM_UNSUPPORTED,
+ .dcs = WMI_PDEV_PARAM_DCS,
+ .ani_enable = WMI_PDEV_PARAM_ANI_ENABLE,
+ .ani_poll_period = WMI_PDEV_PARAM_ANI_POLL_PERIOD,
+ .ani_listen_period = WMI_PDEV_PARAM_ANI_LISTEN_PERIOD,
+ .ani_ofdm_level = WMI_PDEV_PARAM_ANI_OFDM_LEVEL,
+ .ani_cck_level = WMI_PDEV_PARAM_ANI_CCK_LEVEL,
+ .dyntxchain = WMI_PDEV_PARAM_DYNTXCHAIN,
+ .proxy_sta = WMI_PDEV_PARAM_PROXY_STA,
+ .idle_ps_config = WMI_PDEV_PARAM_IDLE_PS_CONFIG,
+ .power_gating_sleep = WMI_PDEV_PARAM_POWER_GATING_SLEEP,
+ .fast_channel_reset = WMI_PDEV_PARAM_UNSUPPORTED,
+ .burst_dur = WMI_PDEV_PARAM_UNSUPPORTED,
+ .burst_enable = WMI_PDEV_PARAM_UNSUPPORTED,
+};
+
+static struct wmi_pdev_param_map wmi_10x_pdev_param_map = {
+ .tx_chain_mask = WMI_10X_PDEV_PARAM_TX_CHAIN_MASK,
+ .rx_chain_mask = WMI_10X_PDEV_PARAM_RX_CHAIN_MASK,
+ .txpower_limit2g = WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G,
+ .txpower_limit5g = WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G,
+ .txpower_scale = WMI_10X_PDEV_PARAM_TXPOWER_SCALE,
+ .beacon_gen_mode = WMI_10X_PDEV_PARAM_BEACON_GEN_MODE,
+ .beacon_tx_mode = WMI_10X_PDEV_PARAM_BEACON_TX_MODE,
+ .resmgr_offchan_mode = WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
+ .protection_mode = WMI_10X_PDEV_PARAM_PROTECTION_MODE,
+ .dynamic_bw = WMI_10X_PDEV_PARAM_DYNAMIC_BW,
+ .non_agg_sw_retry_th = WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
+ .agg_sw_retry_th = WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH,
+ .sta_kickout_th = WMI_10X_PDEV_PARAM_STA_KICKOUT_TH,
+ .ac_aggrsize_scaling = WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING,
+ .ltr_enable = WMI_10X_PDEV_PARAM_LTR_ENABLE,
+ .ltr_ac_latency_be = WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE,
+ .ltr_ac_latency_bk = WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK,
+ .ltr_ac_latency_vi = WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI,
+ .ltr_ac_latency_vo = WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO,
+ .ltr_ac_latency_timeout = WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
+ .ltr_sleep_override = WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
+ .ltr_rx_override = WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE,
+ .ltr_tx_activity_timeout = WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
+ .l1ss_enable = WMI_10X_PDEV_PARAM_L1SS_ENABLE,
+ .dsleep_enable = WMI_10X_PDEV_PARAM_DSLEEP_ENABLE,
+ .pcielp_txbuf_flush = WMI_PDEV_PARAM_UNSUPPORTED,
+ .pcielp_txbuf_watermark = WMI_PDEV_PARAM_UNSUPPORTED,
+ .pcielp_txbuf_tmo_en = WMI_PDEV_PARAM_UNSUPPORTED,
+ .pcielp_txbuf_tmo_value = WMI_PDEV_PARAM_UNSUPPORTED,
+ .pdev_stats_update_period = WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
+ .vdev_stats_update_period = WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
+ .peer_stats_update_period = WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
+ .bcnflt_stats_update_period =
+ WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
+ .pmf_qos = WMI_10X_PDEV_PARAM_PMF_QOS,
+ .arp_ac_override = WMI_PDEV_PARAM_UNSUPPORTED,
+ .arpdhcp_ac_override = WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE,
+ .dcs = WMI_10X_PDEV_PARAM_DCS,
+ .ani_enable = WMI_10X_PDEV_PARAM_ANI_ENABLE,
+ .ani_poll_period = WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD,
+ .ani_listen_period = WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD,
+ .ani_ofdm_level = WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL,
+ .ani_cck_level = WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL,
+ .dyntxchain = WMI_10X_PDEV_PARAM_DYNTXCHAIN,
+ .proxy_sta = WMI_PDEV_PARAM_UNSUPPORTED,
+ .idle_ps_config = WMI_PDEV_PARAM_UNSUPPORTED,
+ .power_gating_sleep = WMI_PDEV_PARAM_UNSUPPORTED,
+ .fast_channel_reset = WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET,
+ .burst_dur = WMI_10X_PDEV_PARAM_BURST_DUR,
+ .burst_enable = WMI_10X_PDEV_PARAM_BURST_ENABLE,
+};
+
int ath10k_wmi_wait_for_service_ready(struct ath10k *ar)
{
int ret;
@@ -1870,10 +1975,12 @@ int ath10k_wmi_attach(struct ath10k *ar)
ath10k_warn("Firmware 10.X is not yet supported\n");
ar->wmi.cmd = &wmi_10x_cmd_map;
ar->wmi.vdev_param = &wmi_10x_vdev_param_map;
+ ar->wmi.pdev_param = &wmi_10x_pdev_param_map;
ret = -ENOTSUPP;
} else {
ar->wmi.cmd = &wmi_cmd_map;
ar->wmi.vdev_param = &wmi_vdev_param_map;
+ ar->wmi.pdev_param = &wmi_pdev_param_map;
ret = 0;
}
@@ -2009,12 +2116,16 @@ int ath10k_wmi_pdev_resume_target(struct ath10k *ar)
return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->pdev_resume_cmdid);
}
-int ath10k_wmi_pdev_set_param(struct ath10k *ar, enum wmi_pdev_param id,
- u32 value)
+int ath10k_wmi_pdev_set_param(struct ath10k *ar, u32 id, u32 value)
{
struct wmi_pdev_set_param_cmd *cmd;
struct sk_buff *skb;
+ if (id == WMI_PDEV_PARAM_UNSUPPORTED) {
+ ath10k_warn("pdev param %d not supported by firmware\n", id);
+ return -EINVAL;
+ }
+
skb = ath10k_wmi_alloc_skb(sizeof(*cmd));
if (!skb)
return -ENOMEM;
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 1518586..80ab2f0 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -2072,6 +2072,60 @@ struct wmi_csa_event {
#define VDEV_DEFAULT_STATS_UPDATE_PERIOD 500
#define PEER_DEFAULT_STATS_UPDATE_PERIOD 500
+struct wmi_pdev_param_map {
+ u32 tx_chain_mask;
+ u32 rx_chain_mask;
+ u32 txpower_limit2g;
+ u32 txpower_limit5g;
+ u32 txpower_scale;
+ u32 beacon_gen_mode;
+ u32 beacon_tx_mode;
+ u32 resmgr_offchan_mode;
+ u32 protection_mode;
+ u32 dynamic_bw;
+ u32 non_agg_sw_retry_th;
+ u32 agg_sw_retry_th;
+ u32 sta_kickout_th;
+ u32 ac_aggrsize_scaling;
+ u32 ltr_enable;
+ u32 ltr_ac_latency_be;
+ u32 ltr_ac_latency_bk;
+ u32 ltr_ac_latency_vi;
+ u32 ltr_ac_latency_vo;
+ u32 ltr_ac_latency_timeout;
+ u32 ltr_sleep_override;
+ u32 ltr_rx_override;
+ u32 ltr_tx_activity_timeout;
+ u32 l1ss_enable;
+ u32 dsleep_enable;
+ u32 pcielp_txbuf_flush;
+ u32 pcielp_txbuf_watermark;
+ u32 pcielp_txbuf_tmo_en;
+ u32 pcielp_txbuf_tmo_value;
+ u32 pdev_stats_update_period;
+ u32 vdev_stats_update_period;
+ u32 peer_stats_update_period;
+ u32 bcnflt_stats_update_period;
+ u32 pmf_qos;
+ u32 arp_ac_override;
+ u32 arpdhcp_ac_override;
+ u32 dcs;
+ u32 ani_enable;
+ u32 ani_poll_period;
+ u32 ani_listen_period;
+ u32 ani_ofdm_level;
+ u32 ani_cck_level;
+ u32 dyntxchain;
+ u32 proxy_sta;
+ u32 idle_ps_config;
+ u32 power_gating_sleep;
+ u32 fast_channel_reset;
+ u32 burst_dur;
+ u32 burst_enable;
+};
+
+#define WMI_PDEV_PARAM_UNSUPPORTED 0
+
enum wmi_pdev_param {
/* TX chian mask */
WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
@@ -2171,6 +2225,97 @@ enum wmi_pdev_param {
WMI_PDEV_PARAM_POWER_GATING_SLEEP,
};
+enum wmi_10x_pdev_param {
+ /* TX chian mask */
+ WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
+ /* RX chian mask */
+ WMI_10X_PDEV_PARAM_RX_CHAIN_MASK,
+ /* TX power limit for 2G Radio */
+ WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G,
+ /* TX power limit for 5G Radio */
+ WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G,
+ /* TX power scale */
+ WMI_10X_PDEV_PARAM_TXPOWER_SCALE,
+ /* Beacon generation mode . 0: host, 1: target */
+ WMI_10X_PDEV_PARAM_BEACON_GEN_MODE,
+ /* Beacon generation mode . 0: staggered 1: bursted */
+ WMI_10X_PDEV_PARAM_BEACON_TX_MODE,
+ /*
+ * Resource manager off chan mode .
+ * 0: turn off off chan mode. 1: turn on offchan mode
+ */
+ WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
+ /*
+ * Protection mode:
+ * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
+ */
+ WMI_10X_PDEV_PARAM_PROTECTION_MODE,
+ /* Dynamic bandwidth 0: disable 1: enable */
+ WMI_10X_PDEV_PARAM_DYNAMIC_BW,
+ /* Non aggregrate/ 11g sw retry threshold.0-disable */
+ WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
+ /* aggregrate sw retry threshold. 0-disable*/
+ WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH,
+ /* Station kickout threshold (non of consecutive failures).0-disable */
+ WMI_10X_PDEV_PARAM_STA_KICKOUT_TH,
+ /* Aggerate size scaling configuration per AC */
+ WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING,
+ /* LTR enable */
+ WMI_10X_PDEV_PARAM_LTR_ENABLE,
+ /* LTR latency for BE, in us */
+ WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE,
+ /* LTR latency for BK, in us */
+ WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK,
+ /* LTR latency for VI, in us */
+ WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI,
+ /* LTR latency for VO, in us */
+ WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO,
+ /* LTR AC latency timeout, in ms */
+ WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
+ /* LTR platform latency override, in us */
+ WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
+ /* LTR-RX override, in us */
+ WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE,
+ /* Tx activity timeout for LTR, in us */
+ WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
+ /* L1SS state machine enable */
+ WMI_10X_PDEV_PARAM_L1SS_ENABLE,
+ /* Deep sleep state machine enable */
+ WMI_10X_PDEV_PARAM_DSLEEP_ENABLE,
+ /* pdev level stats update period in ms */
+ WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
+ /* vdev level stats update period in ms */
+ WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
+ /* peer level stats update period in ms */
+ WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
+ /* beacon filter status update period */
+ WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
+ /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
+ WMI_10X_PDEV_PARAM_PMF_QOS,
+ /* Access category on which ARP and DHCP frames are sent */
+ WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE,
+ /* DCS configuration */
+ WMI_10X_PDEV_PARAM_DCS,
+ /* Enable/Disable ANI on target */
+ WMI_10X_PDEV_PARAM_ANI_ENABLE,
+ /* configure the ANI polling period */
+ WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD,
+ /* configure the ANI listening period */
+ WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD,
+ /* configure OFDM immunity level */
+ WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL,
+ /* configure CCK immunity level */
+ WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL,
+ /* Enable/Disable CDD for 1x1 STAs in rate control module */
+ WMI_10X_PDEV_PARAM_DYNTXCHAIN,
+ /* Enable/Disable Fast channel reset*/
+ WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET,
+ /* Set Bursting DUR */
+ WMI_10X_PDEV_PARAM_BURST_DUR,
+ /* Set Bursting Enable*/
+ WMI_10X_PDEV_PARAM_BURST_ENABLE,
+};
+
struct wmi_pdev_set_param_cmd {
__le32 param_id;
__le32 param_value;
@@ -3797,8 +3942,7 @@ int ath10k_wmi_pdev_suspend_target(struct ath10k *ar);
int ath10k_wmi_pdev_resume_target(struct ath10k *ar);
int ath10k_wmi_pdev_set_regdomain(struct ath10k *ar, u16 rd, u16 rd2g,
u16 rd5g, u16 ctl2g, u16 ctl5g);
-int ath10k_wmi_pdev_set_param(struct ath10k *ar, enum wmi_pdev_param id,
- u32 value);
+int ath10k_wmi_pdev_set_param(struct ath10k *ar, u32 id, u32 value);
int ath10k_wmi_cmd_init(struct ath10k *ar);
int ath10k_wmi_start_scan(struct ath10k *ar, const struct wmi_start_scan_arg *);
void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *);
--
1.7.10
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v2 13/13] ath10k: handle FW API differences for scan structures
2013-09-26 9:29 [PATCH v2 00/13] ath10k: dual-firmware support (MAIN and 10.X) Bartosz Markowski
` (11 preceding siblings ...)
2013-09-26 9:29 ` [PATCH v2 12/13] ath10k: introduce dynamic pdev parameters Bartosz Markowski
@ 2013-09-26 9:29 ` Bartosz Markowski
2013-09-26 13:05 ` [PATCH v2 00/13] ath10k: dual-firmware support (MAIN and 10.X) Kalle Valo
13 siblings, 0 replies; 17+ messages in thread
From: Bartosz Markowski @ 2013-09-26 9:29 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Bartosz Markowski
The wmi_start_scan_cmd has an extra filed in our main
firmware track, reflact that to not have a mismatch in
case of 10.x track.
Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
---
drivers/net/wireless/ath/ath10k/wmi.c | 19 ++++++--
drivers/net/wireless/ath/ath10k/wmi.h | 82 +++++++++++++++++++++++++++++++++
2 files changed, 97 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 8c3316d..328d4eb 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -2341,11 +2341,15 @@ int ath10k_wmi_cmd_init(struct ath10k *ar)
return ret;
}
-static int ath10k_wmi_start_scan_calc_len(const struct wmi_start_scan_arg *arg)
+static int ath10k_wmi_start_scan_calc_len(struct ath10k *ar,
+ const struct wmi_start_scan_arg *arg)
{
int len;
- len = sizeof(struct wmi_start_scan_cmd);
+ if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features))
+ len = sizeof(struct wmi_start_scan_cmd_10x);
+ else
+ len = sizeof(struct wmi_start_scan_cmd);
if (arg->ie_len) {
if (!arg->ie)
@@ -2405,7 +2409,7 @@ int ath10k_wmi_start_scan(struct ath10k *ar,
int len = 0;
int i;
- len = ath10k_wmi_start_scan_calc_len(arg);
+ len = ath10k_wmi_start_scan_calc_len(ar, arg);
if (len < 0)
return len; /* len contains error code here */
@@ -2437,7 +2441,14 @@ int ath10k_wmi_start_scan(struct ath10k *ar,
cmd->scan_ctrl_flags = __cpu_to_le32(arg->scan_ctrl_flags);
/* TLV list starts after fields included in the struct */
- off = sizeof(*cmd);
+ /* There's just one filed that differes the two start_scan
+ * structures - burst_duration, which we are not using btw,
+ no point to make the split here, just shift the buffer to fit with
+ given FW */
+ if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features))
+ off = sizeof(struct wmi_start_scan_cmd_10x);
+ else
+ off = sizeof(struct wmi_start_scan_cmd);
if (arg->n_channels) {
channels = (void *)skb->data + off;
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 80ab2f0..7692c14 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -1715,6 +1715,88 @@ struct wmi_start_scan_cmd {
*/
} __packed;
+/* This is the definition from 10.X firmware branch */
+struct wmi_start_scan_cmd_10x {
+ /* Scan ID */
+ __le32 scan_id;
+
+ /* Scan requestor ID */
+ __le32 scan_req_id;
+
+ /* VDEV id(interface) that is requesting scan */
+ __le32 vdev_id;
+
+ /* Scan Priority, input to scan scheduler */
+ __le32 scan_priority;
+
+ /* Scan events subscription */
+ __le32 notify_scan_events;
+
+ /* dwell time in msec on active channels */
+ __le32 dwell_time_active;
+
+ /* dwell time in msec on passive channels */
+ __le32 dwell_time_passive;
+
+ /*
+ * min time in msec on the BSS channel,only valid if atleast one
+ * VDEV is active
+ */
+ __le32 min_rest_time;
+
+ /*
+ * max rest time in msec on the BSS channel,only valid if at least
+ * one VDEV is active
+ */
+ /*
+ * the scanner will rest on the bss channel at least min_rest_time
+ * after min_rest_time the scanner will start checking for tx/rx
+ * activity on all VDEVs. if there is no activity the scanner will
+ * switch to off channel. if there is activity the scanner will let
+ * the radio on the bss channel until max_rest_time expires.at
+ * max_rest_time scanner will switch to off channel irrespective of
+ * activity. activity is determined by the idle_time parameter.
+ */
+ __le32 max_rest_time;
+
+ /*
+ * time before sending next set of probe requests.
+ * The scanner keeps repeating probe requests transmission with
+ * period specified by repeat_probe_time.
+ * The number of probe requests specified depends on the ssid_list
+ * and bssid_list
+ */
+ __le32 repeat_probe_time;
+
+ /* time in msec between 2 consequetive probe requests with in a set. */
+ __le32 probe_spacing_time;
+
+ /*
+ * data inactivity time in msec on bss channel that will be used by
+ * scanner for measuring the inactivity.
+ */
+ __le32 idle_time;
+
+ /* maximum time in msec allowed for scan */
+ __le32 max_scan_time;
+
+ /*
+ * delay in msec before sending first probe request after switching
+ * to a channel
+ */
+ __le32 probe_delay;
+
+ /* Scan control flags */
+ __le32 scan_ctrl_flags;
+
+ /*
+ * TLV (tag length value ) paramerters follow the scan_cmd structure.
+ * TLV can contain channel list, bssid list, ssid list and
+ * ie. the TLV tags are defined above;
+ */
+} __packed;
+
+
struct wmi_ssid_arg {
int len;
const u8 *ssid;
--
1.7.10
^ permalink raw reply related [flat|nested] 17+ messages in thread* Re: [PATCH v2 00/13] ath10k: dual-firmware support (MAIN and 10.X)
2013-09-26 9:29 [PATCH v2 00/13] ath10k: dual-firmware support (MAIN and 10.X) Bartosz Markowski
` (12 preceding siblings ...)
2013-09-26 9:29 ` [PATCH v2 13/13] ath10k: handle FW API differences for scan structures Bartosz Markowski
@ 2013-09-26 13:05 ` Kalle Valo
13 siblings, 0 replies; 17+ messages in thread
From: Kalle Valo @ 2013-09-26 13:05 UTC (permalink / raw)
To: Bartosz Markowski; +Cc: ath10k, linux-wireless
Bartosz Markowski <bartosz.markowski@tieto.com> writes:
> This patch-set adds framework for dynamic support of 10.X FW branch.
>
> The major changes covered by this work:
> * dynamic WMI structures
> * WMI cmd/event definitions from 10.x FW track
> * memory host chunks feature
> * management frames path over WMI for 10.x
> * WMI RX events handling for MAIN and 10.X split
> * target config split (LARGE AP feature for 10.x)
> * scan start sctructure split
> * dynamic VDEV and PDEV parameters structures
>
> Changes in v2
> (review comments from Kalle and Michal):
> * WMI cmd, pdev and vdev params names trimmed
> * ath10k_wmi_cmd_init() exposed only
> * few 'if' statements simplifications
> * 10.x mgmt frames over WMI - 'BUG: scheduling while atomic' fixed
This is looking very good now, I had only had few nitpicks which I found
while reviewing this.
--
Kalle Valo
^ permalink raw reply [flat|nested] 17+ messages in thread