* Re: [PATCH v2 2/4] ath5k: allocate ath5k_hw prior to initializing hw
From: Luis R. Rodriguez @ 2009-09-14 8:56 UTC (permalink / raw)
To: Jiri Slaby; +Cc: linville, devel, ath9k-devel, linux-wireless
In-Reply-To: <43e72e890909140153rd61009ai3eb421e5981a6a43@mail.gmail.com>
On Mon, Sep 14, 2009 at 1:53 AM, Luis R. Rodriguez
<lrodriguez@atheros.com> wrote:
> On Mon, Sep 14, 2009 at 1:50 AM, Luis R. Rodriguez
> <lrodriguez@atheros.com> wrote:
>> On Mon, Sep 14, 2009 at 1:45 AM, Jiri Slaby <jirislaby@gmail.com> wrote:
>>> On 09/14/2009 10:32 AM, Luis R. Rodriguez wrote:
>>>> --- a/drivers/net/wireless/ath/ath.h
>>>> +++ b/drivers/net/wireless/ath/ath.h
>>>> @@ -51,7 +51,7 @@ struct ath_common {
>>>> u8 curbssid[ETH_ALEN];
>>>> u8 bssidmask[ETH_ALEN];
>>>> struct ath_regulatory regulatory;
>>>> - struct ath_ops *ops;
>>>> + const struct ath_ops *ops;
>>>
>>> If I'm looking correctly, this will emit a warning for ath9k.
>>
>> Hm, I'm using C=1 when compiling and see no warnings even from sparse.
>
> Well, as my tree is now, let me rebase and see how it was back then, I
> thought I tested compiled that patch.
Yeah looks peachy.
Luis
^ permalink raw reply
* Re: [PATCH v2 2/4] ath5k: allocate ath5k_hw prior to initializing hw
From: Jiri Slaby @ 2009-09-14 8:59 UTC (permalink / raw)
To: Luis R. Rodriguez; +Cc: linville, devel, ath9k-devel, linux-wireless
In-Reply-To: <43e72e890909140156jcb1f299i718d0b9fe8ab07a8@mail.gmail.com>
On 09/14/2009 10:56 AM, Luis R. Rodriguez wrote:
> Yeah looks peachy.
Yeah, I realized it would emit a warning if ath9k_common_ops was const
and ath_common->ops wasn't. This way it is OK. Sorry for the noise.
Anyway making ath9k_common_ops const would be good ;).
^ permalink raw reply
* Re: [PATCH v2 3/4] ath5k: define ath_common ops
From: Luis R. Rodriguez @ 2009-09-14 9:01 UTC (permalink / raw)
To: Jiri Slaby; +Cc: linville, devel, ath9k-devel, linux-wireless
In-Reply-To: <4AAE02E9.2050905@gmail.com>
On Mon, Sep 14, 2009 at 1:46 AM, Jiri Slaby <jirislaby@gmail.com> wrote:
> On 09/14/2009 10:32 AM, Luis R. Rodriguez wrote:
>> --- a/drivers/net/wireless/ath/ath5k/base.c
>> +++ b/drivers/net/wireless/ath/ath5k/base.c
>> @@ -437,6 +437,22 @@ ath5k_chip_name(enum ath5k_srev_type type, u_int16_t val)
>>
>> return name;
>> }
>> +static unsigned int ath5k_ioread32(void *hw_priv, u32 reg_offset)
>> +{
>> + struct ath5k_hw *ah = (struct ath5k_hw *) hw_priv;
>> + return ioread32(ah->ah_iobase + reg_offset);
>
> Why not just
> return ath5k_hw_reg_read(hw_priv, reg_offset)
> as I suggested?
>
>> +static void ath5k_iowrite32(void *hw_priv, u32 val, u32 reg_offset)
>> +{
>> + struct ath5k_hw *ah = (struct ath5k_hw *) hw_priv;
>> + iowrite32(val, ah->ah_iobase + reg_offset);
>
> and ath5k_hw_reg_write(hw_priv, val, reg_offset)
>
> If we ever decide to not use ioread32/iowrite32, it will need a change
> on a single place.
Alright, will respin, sorry meant to have done that.
>> +}
>> +
>> +const static struct ath_ops ath5k_common_ops = {
>
> C99, 6.11.5 Storage-class specifiers:
> 1 The placement of a storage-class specifier other than at the
> beginning of the declaration specifiers in a declaration is
> an obsolescent feature.
>
> I.e. use static const, please.
Sure thanks for the review.
Luis
^ permalink raw reply
* [PATCH v3 3/4] ath5k: define ath_common ops
From: Luis R. Rodriguez @ 2009-09-14 9:07 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, devel, ath9k-devel, Luis R. Rodriguez
Only common ath read/write ops go through the common ops.
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
---
Here's a respin of 3/4 based on Jiri's comments.
drivers/net/wireless/ath/ath5k/ath5k.h | 16 ++++++++++------
drivers/net/wireless/ath/ath5k/base.c | 17 +++++++++++++++++
drivers/net/wireless/ath/ath5k/base.h | 11 -----------
3 files changed, 27 insertions(+), 17 deletions(-)
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index 29ce868..1416562 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -1315,17 +1315,21 @@ static inline unsigned int ath5k_hw_clocktoh(unsigned int clock, bool turbo)
return turbo ? (clock / 80) : (clock / 40);
}
-/*
- * Read from a register
- */
+static inline struct ath_common *ath5k_hw_common(struct ath5k_hw *ah)
+{
+ return &ah->common;
+}
+
+static inline struct ath_regulatory *ath5k_hw_regulatory(struct ath5k_hw *ah)
+{
+ return &(ath5k_hw_common(ah)->regulatory);
+}
+
static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
{
return ioread32(ah->ah_iobase + reg);
}
-/*
- * Write to a register
- */
static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
{
iowrite32(val, ah->ah_iobase + reg);
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 3cb0752..13bbf3d 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -437,6 +437,22 @@ ath5k_chip_name(enum ath5k_srev_type type, u_int16_t val)
return name;
}
+static unsigned int ath5k_ioread32(void *hw_priv, u32 reg_offset)
+{
+ struct ath5k_hw *ah = (struct ath5k_hw *) hw_priv;
+ return ath5k_hw_reg_read(ah, reg_offset);
+}
+
+static void ath5k_iowrite32(void *hw_priv, u32 val, u32 reg_offset)
+{
+ struct ath5k_hw *ah = (struct ath5k_hw *) hw_priv;
+ ath5k_hw_reg_write(ah, val, reg_offset);
+}
+
+static const struct ath_ops ath5k_common_ops = {
+ .read = ath5k_ioread32,
+ .write = ath5k_iowrite32,
+};
static int __devinit
ath5k_pci_probe(struct pci_dev *pdev,
@@ -576,6 +592,7 @@ ath5k_pci_probe(struct pci_dev *pdev,
sc->ah->ah_sc = sc;
sc->ah->ah_iobase = sc->iobase;
common = ath5k_hw_common(sc->ah);
+ common->ops = &ath5k_common_ops;
common->cachelsz = csz << 2; /* convert to bytes */
/* Initialize device */
diff --git a/drivers/net/wireless/ath/ath5k/base.h b/drivers/net/wireless/ath/ath5k/base.h
index 005d25f..b14ba07 100644
--- a/drivers/net/wireless/ath/ath5k/base.h
+++ b/drivers/net/wireless/ath/ath5k/base.h
@@ -201,15 +201,4 @@ struct ath5k_softc {
#define ath5k_hw_hasveol(_ah) \
(ath5k_hw_get_capability(_ah, AR5K_CAP_VEOL, 0, NULL) == 0)
-static inline struct ath_common *ath5k_hw_common(struct ath5k_hw *ah)
-{
- return &ah->common;
-}
-
-static inline struct ath_regulatory *ath5k_hw_regulatory(struct ath5k_hw *ah)
-{
- return &(ath5k_hw_common(ah)->regulatory);
-
-}
-
#endif
--
1.6.3.3
^ permalink raw reply related
* [PATCH] ath9k: make ath9k_common_ops const
From: Luis R. Rodriguez @ 2009-09-14 9:10 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, devel, ath9k-devel, Luis R. Rodriguez
As noted by Jiri.
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
---
drivers/net/wireless/ath/ath9k/main.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 588ee89..3223b30 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1583,7 +1583,7 @@ static unsigned int ath9k_ioread32(void *hw_priv, u32 reg_offset)
return val;
}
-static struct ath_ops ath9k_common_ops = {
+static const struct ath_ops ath9k_common_ops = {
.read = ath9k_ioread32,
.write = ath9k_iowrite32,
};
--
1.6.3.3
^ permalink raw reply related
* Re: [PATCH v3 3/4] ath5k: define ath_common ops
From: Jiri Slaby @ 2009-09-14 9:10 UTC (permalink / raw)
To: Luis R. Rodriguez; +Cc: linville, devel, ath9k-devel, linux-wireless
In-Reply-To: <1252919221-13628-1-git-send-email-lrodriguez@atheros.com>
On 09/14/2009 11:07 AM, Luis R. Rodriguez wrote:
> Only common ath read/write ops go through the common ops.
>
> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
> ---
>
> Here's a respin of 3/4 based on Jiri's comments.
Thanks.
Acked-by: Jiri Slaby <jirislaby@gmail.com>
^ permalink raw reply
* Re: pending patches for atheros - all-in-one file - 2009-09-14
From: Luis R. Rodriguez @ 2009-09-14 9:20 UTC (permalink / raw)
To: linux-wireless, ath9k-devel, devel; +Cc: Sujith
In-Reply-To: <43e72e890909140149t7459b36fgbcca27adb7937d9b@mail.gmail.com>
On Mon, Sep 14, 2009 at 1:49 AM, Luis R. Rodriguez <mcgrof@gmail.com> wrote:
> This file has all pending patches from my series + sujiths ANI fix patch:
>
> http://bombadil.infradead.org/~mcgrof/patches/ath/2009/09/all-pending-2009-09-14.patch
Except it doesn't obviously have the updated ath5k ops patch I just
posted nor the last const patch, here is the new all-in-one with these
changes:
http://bombadil.infradead.org/~mcgrof/patches/ath/2009/09/all-2009-09-14v2.patch
Luis
^ permalink raw reply
* cfg80211_mgd_wext_connect() and wpa_supplicant don't like each other
From: Holger Schurig @ 2009-09-14 10:54 UTC (permalink / raw)
To: linux-wireless
Hi !
When I'm using
* wpa_supplicant
* a static WEP network block
* wext-compat in linux-wl
I always get two errors when roaming (that is, not at the first
connection):
1252921234.926116: CTRL-EVENT-SCAN-RESULTS
1252921234.926185: 0: 00:13:19:80:da:30 ssid=MNFUNK q70/0/217 e-1
1252921234.926208: 1: 00:1b:d4:44:35:90 ssid=MNWPA q49/0/195 e-1
1252921234.926227: 2: 00:1b:53:11:dc:40 ssid=MNFUNK q46/0/192 e-1
1252921234.926255: Trying to associate with 00:13:19:80:da:30 (SSID='MNFUNK' freq=2437 MHz)
1252921234.927327: sock 3, ifname eth1
1252921235.060073: Associated with 00:13:19:80:da:30
1252921235.060090: CTRL-EVENT-CONNECTED - Connection to 00:13:19:80:da:30 completed (auth)
1252921275.106101: ROAM: search for a better AP
1252921276.182124: CTRL-EVENT-SCAN-RESULTS
1252921276.182148: 0: 00:1b:53:11:dc:40 ssid=MNFUNK q67/0/213 e-1
1252921276.182170: 1: 00:1b:d4:44:35:90 ssid=MNWPA q60/0/206 e-1
1252921276.182189: 2: 00:13:19:80:da:30 ssid=MNFUNK q53/0/199 e-1
1252921276.182218: Trying to associate with 00:1b:53:11:dc:40 (SSID='MNFUNK' freq=2412 MHz)
1252921276.184336: sock 3, ifname eth1
ioctl[SIOCSIWFREQ]: No such file or directory
ioctl[SIOCSIWESSID]: No such file or directory
1252921276.268451: Association request to the driver failed
1252921276.268477: CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
1252921276.355482: Associated with 00:1b:53:11:dc:40
I traced this down a bit into wext-sme.c, cfg80211_mgd_wext_siwfreq().
This function run's cfg80211_mgd_wext_connect() and this function
returns -2.
Isn't this a bit fishy? Why should a connect function be called
when user-space wants to changes the frequency? And if for some
reason this is really helpful/necessary, why return the failure
to do so as an error result back to the original "just change the
frequency" call?
In the end, this here:
1252921276.268451: Association request to the driver failed
1252921276.355482: Associated with 00:1b:53:11:dc:40
looks quite contradicting :-/
--
http://www.holgerschurig.de
^ permalink raw reply
* [PATCH] cfg80211: don't report SME connection errs at SIOCSIW{FREQ/AP/ESSID}
From: Holger Schurig @ 2009-09-14 11:23 UTC (permalink / raw)
To: linux-wireless, John W Linville; +Cc: Johannes Berg
In-Reply-To: <200909141254.14988.hs4233@mail.mn-solutions.de>
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
---
This fixes
1252921276.182218: Trying to associate with 00:1b:53:11:dc:40 (SSID='TEST' freq=2412 MHz)
ioctl[SIOCSIWFREQ]: No such file or directory
ioctl[SIOCSIWESSID]: No such file or directory
1252921276.268451: Association request to the driver failed
1252921276.355482: Associated with 00:1b:53:11:dc:40
and makes it
1252921276.182218: Trying to associate with 00:1b:53:11:dc:40 (SSID='TEST' freq=2412 MHz)
1252921276.355482: Associated with 00:1b:53:11:dc:40
However, otherwise this hasn't been greatly tested and I
don't have a great understanding of cfg80211, SME, etc ...
Index: linux-wl/net/wireless/wext-sme.c
===================================================================
--- linux-wl.orig/net/wireless/wext-sme.c 2009-09-14 12:05:54.000000000 +0200
+++ linux-wl/net/wireless/wext-sme.c 2009-09-14 12:06:09.000000000 +0200
@@ -110,7 +110,7 @@ int cfg80211_mgd_wext_siwfreq(struct net
goto out;
}
- err = cfg80211_mgd_wext_connect(rdev, wdev);
+ cfg80211_mgd_wext_connect(rdev, wdev);
out:
wdev_unlock(wdev);
mutex_unlock(&rdev->devlist_mtx);
@@ -196,7 +196,7 @@ int cfg80211_mgd_wext_siwessid(struct ne
wdev->wext.connect.crypto.control_port = false;
- err = cfg80211_mgd_wext_connect(rdev, wdev);
+ cfg80211_mgd_wext_connect(rdev, wdev);
out:
wdev_unlock(wdev);
mutex_unlock(&rdev->devlist_mtx);
@@ -283,7 +283,7 @@ int cfg80211_mgd_wext_siwap(struct net_d
} else
wdev->wext.connect.bssid = NULL;
- err = cfg80211_mgd_wext_connect(rdev, wdev);
+ cfg80211_mgd_wext_connect(rdev, wdev);
out:
wdev_unlock(wdev);
mutex_unlock(&rdev->devlist_mtx);
--
http://www.holgerschurig.de
^ permalink raw reply
* Re: A station can't reconnect after it wakes up
From: Igor Perminov @ 2009-09-14 11:24 UTC (permalink / raw)
To: Kalle Valo
Cc: Johannes Berg, linux-wireless, hostap, Jouni Malinen,
Artur Skawina
In-Reply-To: <87my4z0w53.fsf@litku.valot.fi>
On Sun, 2009-09-13 at 17:14 +0300, Kalle Valo wrote:
> Igor Perminov <igor.perminov@inbox.ru> writes:
>
> > On Sat, 2009-09-12 at 08:58 -0600, Johannes Berg wrote:
> >
> >> I think this is not necessary. Just make sure that auth/assoc frames
> >> aren't buffered.
> >
> > The handshake is begun by the AP, which considers the STA is in PS mode.
> > So, first EAPOL Key frame is buffered already.
> > The AP informs the STA by TIM after that of course. But I think, there
> > is no any guarantee that the STA analyzes TIM at this point, because the
> > STA considers itself not power-saving.
>
> If this happens then the STA has really broken power save
> implementation. If a STA informs AP about going to power save it should
> _immediately_ start checking the TIM bits. Or is it so that STA actually
> hasn't informed AP about power save after association?
A step-by-step, which causes the issue, is:
1. A STA authenticates and associates with the AP and exchanges
traffic.
2. The STA reports to the AP that it is going to PS state.
3. Some time later (but before max_inactivity) the STA device goes to
the stand-by mode (not only its wi-fi card, but the device itself).
4. The STA device wakes up and begins authentication with an
Auth frame as it hasn't been authenticated/associated previously.
At the step 4 the AP "remembers" the STA and considers it is in the PS
state, so the AP buffers frames, which it has to send to the STA.
But the STA isn't actually in the PS state and so it doesn't check the
TIM bits.
The only inconsistency of the STA implementation may be at the step 3 -
it doesn't send a Disassoc frame before disconnecting.
But it doesn't lead to any issue with an ASUS "production" access point.
> My understanding is that the power save state after association should
> be disabled until STA informs otherwise. So there shouldn't be any
> synchronisation issues.
>
> So mac80211 doesn't clear STA's power save state during association? To
> me that sounds like a bug.
Yes, mac80211 "remembers" STA's power save state.
And my question is - what an event should trigger clearing PS state:
A) An Auth/Assoc frame being received from the STA.
B) An Auth/Assoc Resp frame being sent to the STA.
C) A special API call from an application (hostapd).
D) Something else, may be.
The choice A can be easily implemented. It can be done in
ieee80211_rx_h_sta_process, as Christian Lamparter has written.
But I think, we shouldn't call ap_sta_ps_end as is done for normal PS
state switching, because that leads to sending buffered frames if any,
which is undesirable in our case. Instead, we should simply purge of
buffered frames and clear WLAN_STA_PS.
If nobody objects, I'll prepare an RFC patch.
Igor
^ permalink raw reply
* Re: A station can't reconnect after it wakes up
From: Holger Schurig @ 2009-09-14 12:31 UTC (permalink / raw)
To: Igor Perminov
Cc: Kalle Valo, Johannes Berg, linux-wireless, hostap, Jouni Malinen,
Artur Skawina
In-Reply-To: <1252927472.26765.202.camel@sunlight>
> 4. The STA device wakes up and begins
> authentication with an Auth frame as it hasn't been
> authenticated/associated previously.
What's the status of the PS bit of this Auth Frame?
Does the station here send a NULL func packet with the "I'm under
power again" bit? It might be necessary to do this via a
null-func packet towards some broken APs.
--
http://www.holgerschurig.de
^ permalink raw reply
* Re: A station can't reconnect after it wakes up
From: Jouni Malinen @ 2009-09-14 12:50 UTC (permalink / raw)
To: Igor Perminov
Cc: Kalle Valo, Johannes Berg, linux-wireless, hostap, Artur Skawina
In-Reply-To: <1252927472.26765.202.camel@sunlight>
On Mon, Sep 14, 2009 at 03:24:32PM +0400, Igor Perminov wrote:
> A step-by-step, which causes the issue, is:
> 1. A STA authenticates and associates with the AP and exchanges
> traffic.
> 2. The STA reports to the AP that it is going to PS state.
> 3. Some time later (but before max_inactivity) the STA device goes to
> the stand-by mode (not only its wi-fi card, but the device itself).
and drops the association state without sending disassociation frame..
> 4. The STA device wakes up and begins authentication with an
> Auth frame as it hasn't been authenticated/associated previously.
>
> At the step 4 the AP "remembers" the STA and considers it is in the PS
> state, so the AP buffers frames, which it has to send to the STA.
> But the STA isn't actually in the PS state and so it doesn't check the
> TIM bits.
The authentication and association frames should work fine even in this
case since they should not be buffered.
> The only inconsistency of the STA implementation may be at the step 3 -
> it doesn't send a Disassoc frame before disconnecting.
Which it is free to do. Likewise, the STA would be free to send a data
nullfunc frame with PwrMgt field set to 0 immediately after association
to clear the PS state.
> Yes, mac80211 "remembers" STA's power save state.
> And my question is - what an event should trigger clearing PS state:
> A) An Auth/Assoc frame being received from the STA.
> B) An Auth/Assoc Resp frame being sent to the STA.
> C) A special API call from an application (hostapd).
> D) Something else, may be.
This is somewhat unclear.. Based on the current P802.11REVmb_D1.01, the
authentication or association frame exchange itself would not clear the
PS state at least as far as the use of PwrMgt field in the frame control
field is concerned. Furthermore, there is still discussion on how
exactly the authentication/association state changes in case of this
type of reassociation back to the same AP.
I think it would be a fair design to drop the power save buffered frames
and PS state information on disassociation or in general, when on the
AP, the STA State changes from 3 to 2 or 1. However, it is not clear
whether that happens in this particular case.
Taken into account that the AP can even change the Association ID for
the STA during reassociation, I would be fine with dropping the buffered
frames and clearing the PS state when association is completed
successfully (the STA ACKs the (Re)Association Response frame that had
status code 0). I would hope that the authentication frame sequence or
failed (re)association would not touch the PS buffer or state.
The real time when the association state changes in the AP is when the
ACK frame is received for (Re)Association Response frame. Of the options
you listed, this would be bit after (B), i.e., (C) might be needed to
get the exact timing right. However, I could probably live with (B),
too, in practice.
> But I think, we shouldn't call ap_sta_ps_end as is done for normal PS
> state switching, because that leads to sending buffered frames if any,
> which is undesirable in our case. Instead, we should simply purge of
> buffered frames and clear WLAN_STA_PS.
This is a very good point and we much indeed make sure we do not end up
sending the buffered frames out based on a new authentication or
association frame. This is especially important for the case when the
frames were buffered in RSNA, i.e., they were to be encrypted. During
association, there is no encryption keys available (well, apart from
802.11r FT protocol case when they are ready immediately after
association). However, if everything goes through fine, this may already
be protected by the IEEE 802.1X controlled port, i.e., the frames would
be dropped here if the new authentication has not been completed (but I
have not verified whether this is indeed the case in the current
implementation).
--
Jouni Malinen PGP id EFC895FA
^ permalink raw reply
* Re: RTL8187B wireless driver issue
From: Larry Finger @ 2009-09-14 12:58 UTC (permalink / raw)
To: Vignette consultant; +Cc: wireless
In-Reply-To: <3b0e19890909122130l6c447e40r977f050e1a099794@mail.gmail.com>
Vignette consultant wrote:
> Larry,
>
> I am using Ubuntu 9.0.4 server edition with kernel image 2.6.30.05
> using rtl8187.ko driver module for RTL8187 wireless adapter.
>
> It always reports "wlan0 link not ready" error causing not able to
> use wireless connection at all while trying to get dhcp ip lease. I
> also get the same "eth0 link not ready" error.
>
> Can you advise of any solution?
>
> PS - I get the same error with Ubuntu 2.6.28-11 server kernel image
> also. I even reinstall it, but no luck so far. It gives me same error
> even if I turn off wireless radio!
Please post any messages to the wireless list. That way the general
community can learn and participate, particularly when I get it wrong.
The usual reason for the "link not ready" message is that the network
is down. How are you controlling the network? For wireless, that
message can come from the rfkill switch being off; however, that
functionality is not implemented in 2.6.30 for rtl8187.
Larry
^ permalink raw reply
* Re: iwlagn: order 2 page allocation failures
From: Mel Gorman @ 2009-09-14 13:06 UTC (permalink / raw)
To: Zhu Yi
Cc: Chatre, Reinette, Frans Pop, Larry Finger, John W. Linville,
Pekka Enberg, linux-kernel@vger.kernel.org,
linux-wireless@vger.kernel.org,
ipw3945-devel@lists.sourceforge.net, Andrew Morton,
cl@linux-foundation.org, Krauss, Assaf, Johannes Berg,
Abbas, Mohamed
In-Reply-To: <1252897270.5650.169.camel@debian>
On Mon, Sep 14, 2009 at 11:01:10AM +0800, Zhu Yi wrote:
> On Fri, 2009-09-11 at 16:47 +0800, Mel Gorman wrote:
> > On Thu, Sep 10, 2009 at 02:14:50PM -0700, reinette chatre wrote:
> > > On Thu, 2009-09-10 at 02:02 -0700, Mel Gorman wrote:
> > >
> > > >
> > > > As a total aside, there is still the problem that the driver is depending on
> > > > order-2 allocations. On systems without swap, the allocation problem could be
> > > > more severe as there are fewer pages the system can use to regain contiguity.
> > >
> > > I looked more at the implementation and hardware interface but I do not
> > > see a way around this. We have to provide 8k buffer to device, and we
> > > have to make sure it is aligned.
> > >
> >
> > That would imply an order-1 allocation instead of an order-2 though so
> > it would appear than we are being worse than we have to. It would appear
> > to be because of this +256 bytes that goes onto every buffer.
> >
> > > Do you have any suggestions?
> > >
> >
> > Nothing concrete. Finding an alternative to having the socket buffer
> > 8192+256 to make it an order-1 allocation would be an improvement but I
> > don't know how that should be tackled. Lacking the hardware, I can't
> > experiment myself :(
>
> Essentially, the hardware only requires an order-1 allocation aligned on
> 256 bytes boundary. But as it is used as an SKB, a trailing struct
> skb_shared_info is added. This forces us to both increase the order and
> do alignment ourselves. I believe some improvement could be done here.
> But it should not be an easy one.
>
Probably not. I can only assume that moving the location of
skb_shared_info such that it is sometimes located after the buffer and
sometimes allocated via a separate kmalloc() would be a significant
undertaking.
> BTW, does SLAB/SLUB guarantee size of multiple PAGE_SIZE __kmalloc()
> allocation align on PAGE_SIZE (or 256 bytes) boundary?
>
Page-aligned.
--
Mel Gorman
Part-time Phd Student Linux Technology Center
University of Limerick IBM Dublin Software Lab
^ permalink raw reply
* Kernel oops with 2.6.31-wl
From: Larry Finger @ 2009-09-14 14:05 UTC (permalink / raw)
To: Johannes Berg; +Cc: wireless
Using the kernel v2.6.31-38241-g2d3a51e, I get the following kernel
oops when unloading b43:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
IP: [<ffffffffa02a3a3e>] b43_op_config+0x10c/0x36f [b43]
PGD 79901067 PUD 2e6f0067 PMD 0
Oops: 0000 [#1] SMP
last sysfs file: /sys/class/rfkill/rfkill0/state
CPU 0
Modules linked in: udf crc_itu_t aes_x86_64 aes_generic af_packet
snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device vboxnetadp nfs
vboxnetflt lockd nfs_acl auth_rpcgss sunrpc vboxdrv
cpufreq_conservative cpufreq_userspace cpufreq_powersave powernow_k8
fuse ext4 jbd2 crc16 loop dm_mod ide_cd_mod cdrom
snd_hda_codec_conexant arc4 ecb ide_pci_generic b43(-) rng_core
snd_hda_intel mac80211 snd_hda_codec snd_pcm cfg80211 rfkill snd_timer
ac battery snd led_class amd74xx soundcore i2c_nforce2 button
serio_raw joydev k8temp forcedeth snd_page_alloc ssb ide_core hwmon
i2c_core sg sd_mod ohci_hcd ehci_hcd usbcore edd ahci libata scsi_mod
ext3 mbcache jbd fan thermal processor
Pid: 10483, comm: modprobe Not tainted 2.6.31-rc9-wl #209 HP Pavilion
dv2700 Notebook PC
RIP: 0010:[<ffffffffa02a3a3e>] [<ffffffffa02a3a3e>]
b43_op_config+0x10c/0x36f [b43]
RSP: 0018:ffff88002e7f3a48 EFLAGS: 00010296
RAX: 000000000000001a RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff880002189000 RSI: 0000000000000001 RDI: 0000000000000004
RBP: ffff88002e7f3a98 R08: 0000000000000086 R09: ffffffff81058b2b
R10: 0000000000000086 R11: ffffffff8171e670 R12: ffff8800b9ebb800
R13: ffff8800b9c61720 R14: ffff8800378b8e40 R15: ffff8800b9c60500
FS: 00007fb8fdceb6f0(0000) GS:ffff880002189000(0000)
knlGS:00000000b725c970
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000010 CR3: 000000002e78a000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process modprobe (pid: 10483, threadinfo ffff88002e7f2000, task
ffff8800aa0d3bc0)
Stack:
ffff88002e7f3a68 00000100810639d0 ffff8800b9c61730 ffffffffa02c4de0
<0> 01ff88002e7f3a78 ffff8800b9c60500 0000000000000100 0000000000000100
<0> ffff8800378b8e40 ffff8800378b86d0 ffff88002e7f3ab8 ffffffffa025d197
Call Trace:
[<ffffffffa025d197>] ieee80211_hw_config+0xa2/0xab [mac80211]
[<ffffffffa0266819>] ieee80211_recalc_idle+0x44/0x4c [mac80211]
[<ffffffffa026310a>] ieee80211_set_disassoc+0x158/0x287 [mac80211]
[<ffffffffa0263077>] ? ieee80211_set_disassoc+0xc5/0x287 [mac80211]
[<ffffffffa026374d>] ieee80211_mgd_deauth+0x67/0xfb [mac80211]
[<ffffffffa0269144>] ieee80211_deauth+0x19/0x1b [mac80211]
[<ffffffffa02172bb>] __cfg80211_mlme_deauth+0x10c/0x11b [cfg80211]
[<ffffffffa021a7f9>] __cfg80211_disconnect+0x10c/0x184 [cfg80211]
[<ffffffffa020936a>] ? cfg80211_netdev_notifier_call+0x262/0x436
[cfg80211]
[<ffffffffa02093a3>] cfg80211_netdev_notifier_call+0x29b/0x436 [cfg80211]
[<ffffffff8121a31a>] ? fib_rules_event+0x3b/0x13e
[<ffffffff81058ca7>] notifier_call_chain+0x33/0x5b
[<ffffffff81058d3f>] raw_notifier_call_chain+0xf/0x11
[<ffffffff8120cfd9>] dev_close+0x6a/0xac
[<ffffffff8120d09e>] rollback_registered+0x83/0x26e
[<ffffffff8120d2c3>] unregister_netdevice+0x3a/0x68
[<ffffffffa02668af>] ieee80211_remove_interfaces+0x8e/0xa0 [mac80211]
[<ffffffffa025c093>] ieee80211_unregister_hw+0x42/0xe5 [mac80211]
[<ffffffffa029f561>] b43_remove+0x69/0xbd [b43]
[<ffffffffa0168201>] ssb_device_remove+0x2b/0x3f [ssb]
[<ffffffff811d8ece>] __device_release_driver+0x80/0xc9
[<ffffffff811d8f9e>] driver_detach+0x87/0xad
[<ffffffff811d8193>] bus_remove_driver+0x89/0xb9
[<ffffffff811d94a7>] driver_unregister+0x66/0x6e
[<ffffffffa0169300>] ssb_driver_unregister+0xd/0xf [ssb]
[<ffffffffa02b8ba0>] b43_exit+0x10/0x17 [b43]
[<ffffffff8106e1ad>] sys_delete_module+0x1d3/0x249
[<ffffffff810639d0>] ? trace_hardirqs_on_caller+0x10b/0x12f
[<ffffffff8127da70>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[<ffffffff8100ba6b>] system_call_fastpath+0x16/0x1b
Code: 8a 45 d7 41 38 44 24 4a 0f 84 55 01 00 00 e8 6a a8 ff ff 48 c7
c6 18 ca 2b a0 48 89 c2 4c 89 ef 31 c0 e8 86 c0 ff ff 49 8b 5d 00 <44>
8b 73 10 41 83 fe 01 7e 0b 48 89 df e8 25 d7 ff ff 48 89 c3
RIP [<ffffffffa02a3a3e>] b43_op_config+0x10c/0x36f [b43]
RSP <ffff88002e7f3a48>
CR2: 0000000000000010
---[ end trace 024f1ac214ffdbb7 ]---
This is clearly a regression. The fault is not present in
2.6.31-rc8-wl, but was in 2.6.31-rc9-wl. I will start a bisection, but
I hope this dump triggers a response. I'm hoping that it does not end
up in mainline during the current merge period.
Larry
^ permalink raw reply
* Re: RTL8187B wireless driver issue
From: Vignette consultant @ 2009-09-14 14:19 UTC (permalink / raw)
To: Larry Finger; +Cc: wireless
In-Reply-To: <4AAE3DF7.7060504@lwfinger.net>
Hi
I just built linux kernel 2.6.31 on ubuntu 9.0.4 2.6.28-11 server.
The dhcpclient wlan0 still is unable to get ip address.
I don't see any message in dmesg log for wlan0. The laptop uses
RTL8187 built-in usb card.
The Vista is able to connect through wireless dhcp without any
problem. The linux is not.
How can I trace the root cause of this issue.
Thanks
Sam
On 9/14/09, Larry Finger <Larry.Finger@lwfinger.net> wrote:
> Vignette consultant wrote:
>> Larry,
>>
>> I am using Ubuntu 9.0.4 server edition with kernel image 2.6.30.05
>> using rtl8187.ko driver module for RTL8187 wireless adapter.
>>
>> It always reports "wlan0 link not ready" error causing not able to
>> use wireless connection at all while trying to get dhcp ip lease. I
>> also get the same "eth0 link not ready" error.
>>
>> Can you advise of any solution?
>>
>> PS - I get the same error with Ubuntu 2.6.28-11 server kernel image
>> also. I even reinstall it, but no luck so far. It gives me same error
>> even if I turn off wireless radio!
>
> Please post any messages to the wireless list. That way the general
> community can learn and participate, particularly when I get it wrong.
>
> The usual reason for the "link not ready" message is that the network
> is down. How are you controlling the network? For wireless, that
> message can come from the rfkill switch being off; however, that
> functionality is not implemented in 2.6.30 for rtl8187.
>
> Larry
>
>
>
^ permalink raw reply
* Re: RTL8187B wireless driver issue
From: Larry Finger @ 2009-09-14 14:31 UTC (permalink / raw)
To: Vignette consultant; +Cc: wireless
In-Reply-To: <3b0e19890909140719y7971c9f4m5fe086a9008fd423@mail.gmail.com>
Vignette consultant wrote:
> Hi
>
> I just built linux kernel 2.6.31 on ubuntu 9.0.4 2.6.28-11 server.
> The dhcpclient wlan0 still is unable to get ip address.
>
> I don't see any message in dmesg log for wlan0. The laptop uses
> RTL8187 built-in usb card.
>
> The Vista is able to connect through wireless dhcp without any
> problem. The linux is not.
>
> How can I trace the root cause of this issue.
How are you controlling the network? Is it with NetworkManager?
Please post the output of the command 'iwconfig'. If you get a
"command not found" message, you will need to provide the full path
such as /sbin/iwconfig. Also, does scanning work? Use the command
'sudo iwlist scan'. That command may also require a full path.
Larry
^ permalink raw reply
* 802.11n approved
From: Larry Finger @ 2009-09-14 15:46 UTC (permalink / raw)
To: wireless
According to Network World, the 802.11n standard has been approved.
See http://tinyurl.com/krgmv3.
^ permalink raw reply
* Re: iwlagn: order 2 page allocation failures
From: Christoph Lameter @ 2009-09-14 15:42 UTC (permalink / raw)
To: Zhu Yi
Cc: Mel Gorman, Chatre, Reinette, Frans Pop, Larry Finger,
John W. Linville, Pekka Enberg, linux-kernel@vger.kernel.org,
linux-wireless@vger.kernel.org,
ipw3945-devel@lists.sourceforge.net, Andrew Morton, Krauss, Assaf,
Johannes Berg, Abbas, Mohamed
In-Reply-To: <1252897270.5650.169.camel@debian>
On Mon, 14 Sep 2009, Zhu Yi wrote:
> BTW, does SLAB/SLUB guarantee size of multiple PAGE_SIZE __kmalloc()
> allocation align on PAGE_SIZE (or 256 bytes) boundary?
Page allocators guarantee page aligned data. Slab allocators do not.
You can create a slab that aligns objects on 256 byte boundary if you
want.
^ permalink raw reply
* Re: RTL8187B wireless driver issue
From: Vignette consultant @ 2009-09-14 16:05 UTC (permalink / raw)
To: Larry Finger; +Cc: wireless
In-Reply-To: <4AAE53C8.1060100@lwfinger.net>
[-- Attachment #1: Type: text/plain, Size: 1306 bytes --]
Hi
Attached files contain several logs of various commands. The log-1
file is before running command and log-2 file is after running
specific command.
Here are commands that I give as soon as I log in. It's server edition.
$ sudo ifconfig wlan0 up
$ sudo iwconfig wlan0 ESSID linksys
$ sudo dhclient wlan0 - results in no IP addr leased
Vista connects on linksys without problem as per attached screenshot.
Please advise me about this problem.
Thanks
Sam
On 9/14/09, Larry Finger <Larry.Finger@lwfinger.net> wrote:
> Vignette consultant wrote:
>> Hi
>>
>> I just built linux kernel 2.6.31 on ubuntu 9.0.4 2.6.28-11 server.
>> The dhcpclient wlan0 still is unable to get ip address.
>>
>> I don't see any message in dmesg log for wlan0. The laptop uses
>> RTL8187 built-in usb card.
>>
>> The Vista is able to connect through wireless dhcp without any
>> problem. The linux is not.
>>
>> How can I trace the root cause of this issue.
>
> How are you controlling the network? Is it with NetworkManager?
>
> Please post the output of the command 'iwconfig'. If you get a
> "command not found" message, you will need to provide the full path
> such as /sbin/iwconfig. Also, does scanning work? Use the command
> 'sudo iwlist scan'. That command may also require a full path.
>
> Larry
>
[-- Attachment #2: dhclient-log-1.log --]
[-- Type: text/plain, Size: 778 bytes --]
Internet Systems Consortium DHCP Client V3.1.1
Copyright 2004-2008 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
Listening on LPF/wlan0/00:16:44:8f:8f:90
Sending on LPF/wlan0/00:16:44:8f:8f:90
Sending on Socket/fallback
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 5
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 5
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 8
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 9
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 19
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 8
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
[-- Attachment #3: ifconfig-log-1.log --]
[-- Type: text/plain, Size: 346 bytes --]
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
[-- Attachment #4: ifconfig-log-2.log --]
[-- Type: text/plain, Size: 1009 bytes --]
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wlan0 Link encap:Ethernet HWaddr 00:16:44:8f:8f:90
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wmaster0 Link encap:UNSPEC HWaddr 00-16-44-8F-8F-90-00-00-00-00-00-00-00-00-00-00
UP RUNNING MTU:0 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
[-- Attachment #5: iwconfig-log-1.log --]
[-- Type: text/plain, Size: 426 bytes --]
wlan0 IEEE 802.11bg ESSID:""
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=0 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
[-- Attachment #6: iwconfig-log-2.log --]
[-- Type: text/plain, Size: 463 bytes --]
wlan0 IEEE 802.11bg ESSID:"linksys"
Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated
Tx-Power=27 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
[-- Attachment #7: iwlist-log-1.log --]
[-- Type: text/plain, Size: 2666 bytes --]
wlan0 Scan completed :
Cell 01 - Address: 00:1F:33:3C:63:C4
Channel:1
Frequency:2.412 GHz (Channel 1)
Quality=55/70 Signal level=-55 dBm
Encryption key:on
ESSID:"net2000"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
24 Mb/s; 36 Mb/s; 54 Mb/s
Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
Mode:Master
Extra:tsf=0000003bbdf84183
Extra: Last beacon: 1280ms ago
IE: Unknown: 00076E657432303030
IE: Unknown: 010882848B962430486C
IE: Unknown: 030101
IE: Unknown: 2A0100
IE: Unknown: 2F0100
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
IE: Unknown: 32040C121860
IE: Unknown: DD7C0050F204104A00011010440001021041000100103B00010310470010AA9D0E6D2602AE7039A5776EBF8C70BE1021000D4E4554474541522C20496E632E10230009574E5238333442763210240009574E523833344276321042000230311054000800060050F204000110110009574E52383334427632100800020084
IE: Unknown: DD090010180200F0010000
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00
Cell 02 - Address: 00:12:17:AA:39:66
Channel:6
Frequency:2.437 GHz (Channel 6)
Quality=44/70 Signal level=-66 dBm
Encryption key:off
ESSID:"linksys"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
24 Mb/s; 36 Mb/s; 54 Mb/s
Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
Mode:Master
Extra:tsf=00000000b0f7218a
Extra: Last beacon: 850ms ago
IE: Unknown: 00076C696E6B737973
IE: Unknown: 010882848B962430486C
IE: Unknown: 030106
IE: Unknown: 050400030100
IE: Unknown: 2A0104
IE: Unknown: 2F0104
IE: Unknown: 32040C121860
IE: Unknown: DD06001018020104
[-- Attachment #8: lshw-log-1.log --]
[-- Type: text/plain, Size: 914 bytes --]
*-network DISABLED
description: Ethernet interface
product: 88E8039 PCI-E Fast Ethernet Controller
vendor: Marvell Technology Group Ltd.
physical id: 0
bus info: pci@0000:02:00.0
logical name: eth0
version: 14
serial: 00:a0:d1:95:84:b2
capacity: 100MB/s
width: 64 bits
clock: 33MHz
capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.23 firmware=N/A latency=0 link=yes module=sky2 multicast=yes port=twisted pair
*-network DISABLED
description: Wireless interface
physical id: 1
logical name: wlan0
serial: 00:16:44:8f:8f:90
capabilities: ethernet physical wireless
configuration: broadcast=yes multicast=yes wireless=IEEE 802.11bg
[-- Attachment #9: lshw-log-2.log --]
[-- Type: text/plain, Size: 905 bytes --]
*-network DISABLED
description: Ethernet interface
product: 88E8039 PCI-E Fast Ethernet Controller
vendor: Marvell Technology Group Ltd.
physical id: 0
bus info: pci@0000:02:00.0
logical name: eth0
version: 14
serial: 00:a0:d1:95:84:b2
capacity: 100MB/s
width: 64 bits
clock: 33MHz
capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.23 firmware=N/A latency=0 link=yes module=sky2 multicast=yes port=twisted pair
*-network
description: Wireless interface
physical id: 1
logical name: wlan0
serial: 00:16:44:8f:8f:90
capabilities: ethernet physical wireless
configuration: broadcast=yes multicast=yes wireless=IEEE 802.11bg
[-- Attachment #10: lsmod-log-1.log --]
[-- Type: text/plain, Size: 1176 bytes --]
Module Size Used by
lp 12068 0
parport 42544 1 lp
arc4 2400 2
ecb 3552 2
snd_hda_codec_realtek 276132 1
rtl8187 57188 0
snd_hda_intel 31656 0
mac80211 204408 1 rtl8187
snd_hda_codec 78624 2 snd_hda_codec_realtek,snd_hda_intel
led_class 5576 1 rtl8187
snd_pcm 90984 2 snd_hda_intel,snd_hda_codec
snd_timer 25232 1 snd_pcm
eeprom_93cx6 2816 1 rtl8187
psmouse 56740 0
snd 76008 5 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_pcm,snd_timer
soundcore 9024 1 snd
video 22908 0
intel_agp 32592 1
serio_raw 6916 0
iTCO_wdt 13360 0
iTCO_vendor_support 4580 1 iTCO_wdt
pcspkr 3392 0
snd_page_alloc 11056 2 snd_hda_intel,snd_pcm
output 3968 1 video
cfg80211 107928 2 rtl8187,mac80211
usb_storage 61024 1
usbhid 43456 0
sky2 55460 0
[-- Attachment #11: lsmod-log-2.log --]
[-- Type: text/plain, Size: 1176 bytes --]
Module Size Used by
lp 12068 0
parport 42544 1 lp
arc4 2400 2
ecb 3552 2
snd_hda_codec_realtek 276132 1
rtl8187 57188 0
snd_hda_intel 31656 0
mac80211 204408 1 rtl8187
snd_hda_codec 78624 2 snd_hda_codec_realtek,snd_hda_intel
led_class 5576 1 rtl8187
snd_pcm 90984 2 snd_hda_intel,snd_hda_codec
snd_timer 25232 1 snd_pcm
eeprom_93cx6 2816 1 rtl8187
psmouse 56740 0
snd 76008 5 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_pcm,snd_timer
soundcore 9024 1 snd
video 22908 0
intel_agp 32592 1
serio_raw 6916 0
iTCO_wdt 13360 0
iTCO_vendor_support 4580 1 iTCO_wdt
pcspkr 3392 0
snd_page_alloc 11056 2 snd_hda_intel,snd_pcm
output 3968 1 video
cfg80211 107928 2 rtl8187,mac80211
usb_storage 61024 1
usbhid 43456 0
sky2 55460 0
[-- Attachment #12: lsusb-log-1.log --]
[-- Type: text/plain, Size: 703 bytes --]
Bus 002 Device 004: ID 0bda:8197 Realtek Semiconductor Corp. RTL8187B Wireless Adapter
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 004: ID 1307:0165 Transcend Information, Inc.
Bus 005 Device 003: ID 058f:9254 Alcor Micro Corp. Hub
Bus 005 Device 002: ID 0461:4d15 Primax Electronics, Ltd
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[-- Attachment #13: dmesg-log-1.log --]
[-- Type: text/plain, Size: 124847 bytes --]
age: Attempting to get CSW...
[ 197.477719] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 197.478738] usb-storage: Status code 0; transferred 13/13
[ 197.478741] usb-storage: -- transfer complete
[ 197.478743] usb-storage: Bulk status result = 0
[ 197.478746] usb-storage: Bulk Status S 0x53425355 T 0x7a8 R 0 Stat 0x0
[ 197.478748] usb-storage: scsi cmd done, result=0x0
[ 197.478752] usb-storage: *** thread sleeping.
[ 197.478790] usb-storage: queuecommand called
[ 197.478796] usb-storage: *** thread awakened.
[ 197.478799] usb-storage: Command READ_10 (10 bytes)
[ 197.478800] usb-storage: 28 00 00 b4 00 57 00 00 08 00
[ 197.478810] usb-storage: Bulk Command S 0x43425355 T 0x7a9 L 4096 F 128 Trg 0 LUN 0 CL 10
[ 197.478813] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 197.479702] usb-storage: Status code 0; transferred 31/31
[ 197.479705] usb-storage: -- transfer complete
[ 197.479707] usb-storage: Bulk command transfer result=0
[ 197.479710] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 197.483713] usb-storage: Status code 0; transferred 4096/4096
[ 197.483715] usb-storage: -- transfer complete
[ 197.483717] usb-storage: Bulk data transfer result 0x0
[ 197.483719] usb-storage: Attempting to get CSW...
[ 197.483722] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 197.484720] usb-storage: Status code 0; transferred 13/13
[ 197.484723] usb-storage: -- transfer complete
[ 197.484725] usb-storage: Bulk status result = 0
[ 197.484728] usb-storage: Bulk Status S 0x53425355 T 0x7a9 R 0 Stat 0x0
[ 197.484731] usb-storage: scsi cmd done, result=0x0
[ 197.484735] usb-storage: *** thread sleeping.
[ 197.484994] usb-storage: queuecommand called
[ 197.485017] usb-storage: *** thread awakened.
[ 197.485020] usb-storage: Command READ_10 (10 bytes)
[ 197.485022] usb-storage: 28 00 00 b4 02 67 00 00 08 00
[ 197.485032] usb-storage: Bulk Command S 0x43425355 T 0x7aa L 4096 F 128 Trg 0 LUN 0 CL 10
[ 197.485035] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 197.485718] usb-storage: Status code 0; transferred 31/31
[ 197.485720] usb-storage: -- transfer complete
[ 197.485723] usb-storage: Bulk command transfer result=0
[ 197.485726] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 197.489726] usb-storage: Status code 0; transferred 4096/4096
[ 197.489729] usb-storage: -- transfer complete
[ 197.489731] usb-storage: Bulk data transfer result 0x0
[ 197.489733] usb-storage: Attempting to get CSW...
[ 197.489736] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 197.490719] usb-storage: Status code 0; transferred 13/13
[ 197.490721] usb-storage: -- transfer complete
[ 197.490723] usb-storage: Bulk status result = 0
[ 197.490726] usb-storage: Bulk Status S 0x53425355 T 0x7aa R 0 Stat 0x0
[ 197.490728] usb-storage: scsi cmd done, result=0x0
[ 197.490732] usb-storage: *** thread sleeping.
[ 197.490821] usb-storage: queuecommand called
[ 197.490849] usb-storage: *** thread awakened.
[ 197.490852] usb-storage: Command READ_10 (10 bytes)
[ 197.490854] usb-storage: 28 00 00 b4 02 97 00 00 08 00
[ 197.490864] usb-storage: Bulk Command S 0x43425355 T 0x7ab L 4096 F 128 Trg 0 LUN 0 CL 10
[ 197.490867] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 197.491719] usb-storage: Status code 0; transferred 31/31
[ 197.491722] usb-storage: -- transfer complete
[ 197.491723] usb-storage: Bulk command transfer result=0
[ 197.491726] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 197.495725] usb-storage: Status code 0; transferred 4096/4096
[ 197.495728] usb-storage: -- transfer complete
[ 197.495730] usb-storage: Bulk data transfer result 0x0
[ 197.495732] usb-storage: Attempting to get CSW...
[ 197.495735] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 197.496718] usb-storage: Status code 0; transferred 13/13
[ 197.496721] usb-storage: -- transfer complete
[ 197.496723] usb-storage: Bulk status result = 0
[ 197.496726] usb-storage: Bulk Status S 0x53425355 T 0x7ab R 0 Stat 0x0
[ 197.496728] usb-storage: scsi cmd done, result=0x0
[ 197.496732] usb-storage: *** thread sleeping.
[ 202.012634] usb-storage: queuecommand called
[ 202.012670] usb-storage: *** thread awakened.
[ 202.012678] usb-storage: Command WRITE_10 (10 bytes)
[ 202.012682] usb-storage: 2a 00 00 74 19 a7 00 00 48 00
[ 202.012702] usb-storage: Bulk Command S 0x43425355 T 0x7ac L 36864 F 0 Trg 0 LUN 0 CL 10
[ 202.012708] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 202.014736] usb-storage: Status code 0; transferred 31/31
[ 202.014741] usb-storage: -- transfer complete
[ 202.014745] usb-storage: Bulk command transfer result=0
[ 202.014751] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 202.135767] usb-storage: Status code 0; transferred 36864/36864
[ 202.135772] usb-storage: -- transfer complete
[ 202.135776] usb-storage: Bulk data transfer result 0x0
[ 202.135780] usb-storage: Attempting to get CSW...
[ 202.135785] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 202.136718] usb-storage: Status code 0; transferred 13/13
[ 202.136723] usb-storage: -- transfer complete
[ 202.136727] usb-storage: Bulk status result = 0
[ 202.136732] usb-storage: Bulk Status S 0x53425355 T 0x7ac R 0 Stat 0x0
[ 202.136737] usb-storage: scsi cmd done, result=0x0
[ 202.136745] usb-storage: *** thread sleeping.
[ 202.136828] usb-storage: queuecommand called
[ 202.136839] usb-storage: *** thread awakened.
[ 202.136844] usb-storage: Command WRITE_10 (10 bytes)
[ 202.136848] usb-storage: 2a 00 00 74 19 ef 00 00 08 00
[ 202.136867] usb-storage: Bulk Command S 0x43425355 T 0x7ad L 4096 F 0 Trg 0 LUN 0 CL 10
[ 202.136873] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 202.137734] usb-storage: Status code 0; transferred 31/31
[ 202.137738] usb-storage: -- transfer complete
[ 202.137743] usb-storage: Bulk command transfer result=0
[ 202.137748] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 202.144734] usb-storage: Status code 0; transferred 4096/4096
[ 202.144739] usb-storage: -- transfer complete
[ 202.144744] usb-storage: Bulk data transfer result 0x0
[ 202.144748] usb-storage: Attempting to get CSW...
[ 202.144753] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 202.145735] usb-storage: Status code 0; transferred 13/13
[ 202.145740] usb-storage: -- transfer complete
[ 202.145744] usb-storage: Bulk status result = 0
[ 202.145749] usb-storage: Bulk Status S 0x53425355 T 0x7ad R 0 Stat 0x0
[ 202.145755] usb-storage: scsi cmd done, result=0x0
[ 202.145761] usb-storage: *** thread sleeping.
[ 207.012669] usb-storage: queuecommand called
[ 207.012686] usb-storage: *** thread awakened.
[ 207.012693] usb-storage: Command WRITE_10 (10 bytes)
[ 207.012696] usb-storage: 2a 00 00 74 19 f7 00 00 48 00
[ 207.012717] usb-storage: Bulk Command S 0x43425355 T 0x7ae L 36864 F 0 Trg 0 LUN 0 CL 10
[ 207.012723] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 207.014724] usb-storage: Status code 0; transferred 31/31
[ 207.014728] usb-storage: -- transfer complete
[ 207.014733] usb-storage: Bulk command transfer result=0
[ 207.014738] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 207.133756] usb-storage: Status code 0; transferred 36864/36864
[ 207.133761] usb-storage: -- transfer complete
[ 207.133766] usb-storage: Bulk data transfer result 0x0
[ 207.133770] usb-storage: Attempting to get CSW...
[ 207.133775] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 207.137726] usb-storage: Status code 0; transferred 13/13
[ 207.137731] usb-storage: -- transfer complete
[ 207.137736] usb-storage: Bulk status result = 0
[ 207.137741] usb-storage: Bulk Status S 0x53425355 T 0x7ae R 0 Stat 0x0
[ 207.137747] usb-storage: scsi cmd done, result=0x0
[ 207.137756] usb-storage: *** thread sleeping.
[ 207.137852] usb-storage: queuecommand called
[ 207.137880] usb-storage: *** thread awakened.
[ 207.137887] usb-storage: Command WRITE_10 (10 bytes)
[ 207.137891] usb-storage: 2a 00 00 74 1a 3f 00 00 08 00
[ 207.137910] usb-storage: Bulk Command S 0x43425355 T 0x7af L 4096 F 0 Trg 0 LUN 0 CL 10
[ 207.137916] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 207.138724] usb-storage: Status code 0; transferred 31/31
[ 207.138729] usb-storage: -- transfer complete
[ 207.138733] usb-storage: Bulk command transfer result=0
[ 207.138739] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 207.144767] usb-storage: Status code 0; transferred 4096/4096
[ 207.144772] usb-storage: -- transfer complete
[ 207.144776] usb-storage: Bulk data transfer result 0x0
[ 207.144780] usb-storage: Attempting to get CSW...
[ 207.144784] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 207.145731] usb-storage: Status code 0; transferred 13/13
[ 207.145735] usb-storage: -- transfer complete
[ 207.145739] usb-storage: Bulk status result = 0
[ 207.145745] usb-storage: Bulk Status S 0x53425355 T 0x7af R 0 Stat 0x0
[ 207.145750] usb-storage: scsi cmd done, result=0x0
[ 207.145757] usb-storage: *** thread sleeping.
[ 215.010044] usb-storage: queuecommand called
[ 215.010075] usb-storage: *** thread awakened.
[ 215.010083] usb-storage: Command WRITE_10 (10 bytes)
[ 215.010088] usb-storage: 2a 00 00 b8 ee 27 00 00 70 00
[ 215.010107] usb-storage: Bulk Command S 0x43425355 T 0x7b0 L 57344 F 0 Trg 0 LUN 0 CL 10
[ 215.010114] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 215.011723] usb-storage: Status code 0; transferred 31/31
[ 215.011727] usb-storage: -- transfer complete
[ 215.011731] usb-storage: Bulk command transfer result=0
[ 215.011737] usb-storage: usb_stor_bulk_transfer_sglist: xfer 57344 bytes, 14 entries
[ 215.171773] usb-storage: Status code 0; transferred 57344/57344
[ 215.171779] usb-storage: -- transfer complete
[ 215.171783] usb-storage: Bulk data transfer result 0x0
[ 215.171787] usb-storage: Attempting to get CSW...
[ 215.171793] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 215.197728] usb-storage: Status code 0; transferred 13/13
[ 215.197733] usb-storage: -- transfer complete
[ 215.197737] usb-storage: Bulk status result = 0
[ 215.197742] usb-storage: Bulk Status S 0x53425355 T 0x7b0 R 0 Stat 0x0
[ 215.197748] usb-storage: scsi cmd done, result=0x0
[ 215.197755] usb-storage: *** thread sleeping.
[ 215.197806] usb-storage: queuecommand called
[ 215.197816] usb-storage: *** thread awakened.
[ 215.197822] usb-storage: Command WRITE_10 (10 bytes)
[ 215.197825] usb-storage: 2a 00 00 74 1a 47 00 00 48 00
[ 215.197844] usb-storage: Bulk Command S 0x43425355 T 0x7b1 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 215.197850] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 215.198733] usb-storage: Status code 0; transferred 31/31
[ 215.198738] usb-storage: -- transfer complete
[ 215.198742] usb-storage: Bulk command transfer result=0
[ 215.198747] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 215.434752] usb-storage: Status code 0; transferred 36864/36864
[ 215.434757] usb-storage: -- transfer complete
[ 215.434762] usb-storage: Bulk data transfer result 0x0
[ 215.434766] usb-storage: Attempting to get CSW...
[ 215.434771] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 215.459726] usb-storage: Status code 0; transferred 13/13
[ 215.459731] usb-storage: -- transfer complete
[ 215.459735] usb-storage: Bulk status result = 0
[ 215.459741] usb-storage: Bulk Status S 0x53425355 T 0x7b1 R 0 Stat 0x0
[ 215.459746] usb-storage: scsi cmd done, result=0x0
[ 215.459753] usb-storage: *** thread sleeping.
[ 215.459854] usb-storage: queuecommand called
[ 215.459883] usb-storage: *** thread awakened.
[ 215.459889] usb-storage: Command WRITE_10 (10 bytes)
[ 215.459893] usb-storage: 2a 00 00 74 1a 8f 00 00 08 00
[ 215.459912] usb-storage: Bulk Command S 0x43425355 T 0x7b2 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 215.459918] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 215.460720] usb-storage: Status code 0; transferred 31/31
[ 215.460724] usb-storage: -- transfer complete
[ 215.460728] usb-storage: Bulk command transfer result=0
[ 215.460734] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 215.466762] usb-storage: Status code 0; transferred 4096/4096
[ 215.466766] usb-storage: -- transfer complete
[ 215.466771] usb-storage: Bulk data transfer result 0x0
[ 215.466774] usb-storage: Attempting to get CSW...
[ 215.466779] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 215.468735] usb-storage: Status code 0; transferred 13/13
[ 215.468739] usb-storage: -- transfer complete
[ 215.468743] usb-storage: Bulk status result = 0
[ 215.468749] usb-storage: Bulk Status S 0x53425355 T 0x7b2 R 0 Stat 0x0
[ 215.468754] usb-storage: scsi cmd done, result=0x0
[ 215.468761] usb-storage: *** thread sleeping.
[ 225.010047] usb-storage: queuecommand called
[ 225.010067] usb-storage: *** thread awakened.
[ 225.010074] usb-storage: Command WRITE_10 (10 bytes)
[ 225.010077] usb-storage: 2a 00 00 b8 b9 e7 00 00 60 00
[ 225.010098] usb-storage: Bulk Command S 0x43425355 T 0x7b3 L 49152 F 0 Trg 0 LUN 0 CL 10
[ 225.010104] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 225.011726] usb-storage: Status code 0; transferred 31/31
[ 225.011730] usb-storage: -- transfer complete
[ 225.011734] usb-storage: Bulk command transfer result=0
[ 225.011740] usb-storage: usb_stor_bulk_transfer_sglist: xfer 49152 bytes, 12 entries
[ 225.152757] usb-storage: Status code 0; transferred 49152/49152
[ 225.152762] usb-storage: -- transfer complete
[ 225.152767] usb-storage: Bulk data transfer result 0x0
[ 225.152771] usb-storage: Attempting to get CSW...
[ 225.152776] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 225.178730] usb-storage: Status code 0; transferred 13/13
[ 225.178735] usb-storage: -- transfer complete
[ 225.178739] usb-storage: Bulk status result = 0
[ 225.178744] usb-storage: Bulk Status S 0x53425355 T 0x7b3 R 0 Stat 0x0
[ 225.178751] usb-storage: scsi cmd done, result=0x0
[ 225.178759] usb-storage: *** thread sleeping.
[ 225.178810] usb-storage: queuecommand called
[ 225.178825] usb-storage: *** thread awakened.
[ 225.178831] usb-storage: Command WRITE_10 (10 bytes)
[ 225.178834] usb-storage: 2a 00 00 b8 e7 4f 00 00 60 00
[ 225.178853] usb-storage: Bulk Command S 0x43425355 T 0x7b4 L 49152 F 0 Trg 0 LUN 0 CL 10
[ 225.178859] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 225.179728] usb-storage: Status code 0; transferred 31/31
[ 225.179733] usb-storage: -- transfer complete
[ 225.179738] usb-storage: Bulk command transfer result=0
[ 225.179744] usb-storage: usb_stor_bulk_transfer_sglist: xfer 49152 bytes, 12 entries
[ 225.466757] usb-storage: Status code 0; transferred 49152/49152
[ 225.466762] usb-storage: -- transfer complete
[ 225.466766] usb-storage: Bulk data transfer result 0x0
[ 225.466770] usb-storage: Attempting to get CSW...
[ 225.466775] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 225.468720] usb-storage: Status code 0; transferred 13/13
[ 225.468724] usb-storage: -- transfer complete
[ 225.468728] usb-storage: Bulk status result = 0
[ 225.468734] usb-storage: Bulk Status S 0x53425355 T 0x7b4 R 0 Stat 0x0
[ 225.468739] usb-storage: scsi cmd done, result=0x0
[ 225.468745] usb-storage: *** thread sleeping.
[ 225.468785] usb-storage: queuecommand called
[ 225.468800] usb-storage: *** thread awakened.
[ 225.468805] usb-storage: Command WRITE_10 (10 bytes)
[ 225.468809] usb-storage: 2a 00 00 c7 09 2f 00 00 08 00
[ 225.468827] usb-storage: Bulk Command S 0x43425355 T 0x7b5 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 225.468833] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 225.469727] usb-storage: Status code 0; transferred 31/31
[ 225.469731] usb-storage: -- transfer complete
[ 225.469736] usb-storage: Bulk command transfer result=0
[ 225.469742] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 225.526749] usb-storage: Status code 0; transferred 4096/4096
[ 225.526754] usb-storage: -- transfer complete
[ 225.526759] usb-storage: Bulk data transfer result 0x0
[ 225.526762] usb-storage: Attempting to get CSW...
[ 225.526767] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 225.550728] usb-storage: Status code 0; transferred 13/13
[ 225.550733] usb-storage: -- transfer complete
[ 225.550737] usb-storage: Bulk status result = 0
[ 225.550742] usb-storage: Bulk Status S 0x53425355 T 0x7b5 R 0 Stat 0x0
[ 225.550747] usb-storage: scsi cmd done, result=0x0
[ 225.550753] usb-storage: *** thread sleeping.
[ 225.550771] usb-storage: queuecommand called
[ 225.550781] usb-storage: *** thread awakened.
[ 225.550786] usb-storage: Command WRITE_10 (10 bytes)
[ 225.550789] usb-storage: 2a 00 00 74 1a 97 00 00 48 00
[ 225.550807] usb-storage: Bulk Command S 0x43425355 T 0x7b6 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 225.550813] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 225.551727] usb-storage: Status code 0; transferred 31/31
[ 225.551731] usb-storage: -- transfer complete
[ 225.551735] usb-storage: Bulk command transfer result=0
[ 225.551741] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 225.897751] usb-storage: Status code 0; transferred 36864/36864
[ 225.897756] usb-storage: -- transfer complete
[ 225.897760] usb-storage: Bulk data transfer result 0x0
[ 225.897764] usb-storage: Attempting to get CSW...
[ 225.897768] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 225.899734] usb-storage: Status code 0; transferred 13/13
[ 225.899738] usb-storage: -- transfer complete
[ 225.899742] usb-storage: Bulk status result = 0
[ 225.899748] usb-storage: Bulk Status S 0x53425355 T 0x7b6 R 0 Stat 0x0
[ 225.899753] usb-storage: scsi cmd done, result=0x0
[ 225.899760] usb-storage: *** thread sleeping.
[ 225.899839] usb-storage: queuecommand called
[ 225.899850] usb-storage: *** thread awakened.
[ 225.899856] usb-storage: Command WRITE_10 (10 bytes)
[ 225.899859] usb-storage: 2a 00 00 74 1a df 00 00 08 00
[ 225.899878] usb-storage: Bulk Command S 0x43425355 T 0x7b7 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 225.899884] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 225.900736] usb-storage: Status code 0; transferred 31/31
[ 225.900741] usb-storage: -- transfer complete
[ 225.900745] usb-storage: Bulk command transfer result=0
[ 225.900750] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 225.905754] usb-storage: Status code 0; transferred 4096/4096
[ 225.905758] usb-storage: -- transfer complete
[ 225.905762] usb-storage: Bulk data transfer result 0x0
[ 225.905766] usb-storage: Attempting to get CSW...
[ 225.905771] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 225.907739] usb-storage: Status code 0; transferred 13/13
[ 225.907743] usb-storage: -- transfer complete
[ 225.907747] usb-storage: Bulk status result = 0
[ 225.907753] usb-storage: Bulk Status S 0x53425355 T 0x7b7 R 0 Stat 0x0
[ 225.907758] usb-storage: scsi cmd done, result=0x0
[ 225.907766] usb-storage: *** thread sleeping.
[ 230.000115] usb-storage: queuecommand called
[ 230.000173] usb-storage: *** thread awakened.
[ 230.000180] usb-storage: Command WRITE_10 (10 bytes)
[ 230.000184] usb-storage: 2a 00 00 b4 00 4f 00 00 08 00
[ 230.000202] usb-storage: Bulk Command S 0x43425355 T 0x7b8 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 230.000208] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 230.001723] usb-storage: Status code 0; transferred 31/31
[ 230.001729] usb-storage: -- transfer complete
[ 230.001733] usb-storage: Bulk command transfer result=0
[ 230.001739] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 230.015752] usb-storage: Status code 0; transferred 4096/4096
[ 230.015757] usb-storage: -- transfer complete
[ 230.015762] usb-storage: Bulk data transfer result 0x0
[ 230.015766] usb-storage: Attempting to get CSW...
[ 230.015771] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 230.040731] usb-storage: Status code 0; transferred 13/13
[ 230.040736] usb-storage: -- transfer complete
[ 230.040740] usb-storage: Bulk status result = 0
[ 230.040746] usb-storage: Bulk Status S 0x53425355 T 0x7b8 R 0 Stat 0x0
[ 230.040751] usb-storage: scsi cmd done, result=0x0
[ 230.040758] usb-storage: *** thread sleeping.
[ 230.040784] usb-storage: queuecommand called
[ 230.040799] usb-storage: *** thread awakened.
[ 230.040804] usb-storage: Command WRITE_10 (10 bytes)
[ 230.040808] usb-storage: 2a 00 00 c4 0f 57 00 00 18 00
[ 230.040827] usb-storage: Bulk Command S 0x43425355 T 0x7b9 L 12288 F 0 Trg 0 LUN 0 CL 10
[ 230.040833] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 230.041723] usb-storage: Status code 0; transferred 31/31
[ 230.041728] usb-storage: -- transfer complete
[ 230.041732] usb-storage: Bulk command transfer result=0
[ 230.041738] usb-storage: usb_stor_bulk_transfer_sglist: xfer 12288 bytes, 3 entries
[ 230.404760] usb-storage: Status code 0; transferred 12288/12288
[ 230.404765] usb-storage: -- transfer complete
[ 230.404769] usb-storage: Bulk data transfer result 0x0
[ 230.404773] usb-storage: Attempting to get CSW...
[ 230.404778] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 230.406736] usb-storage: Status code 0; transferred 13/13
[ 230.406740] usb-storage: -- transfer complete
[ 230.406744] usb-storage: Bulk status result = 0
[ 230.406749] usb-storage: Bulk Status S 0x53425355 T 0x7b9 R 0 Stat 0x0
[ 230.406755] usb-storage: scsi cmd done, result=0x0
[ 230.406761] usb-storage: *** thread sleeping.
[ 230.406788] usb-storage: queuecommand called
[ 230.406803] usb-storage: *** thread awakened.
[ 230.406808] usb-storage: Command WRITE_10 (10 bytes)
[ 230.406812] usb-storage: 2a 00 00 c4 0f e7 00 00 08 00
[ 230.406831] usb-storage: Bulk Command S 0x43425355 T 0x7ba L 4096 F 0 Trg 0 LUN 0 CL 10
[ 230.406837] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 230.407721] usb-storage: Status code 0; transferred 31/31
[ 230.407725] usb-storage: -- transfer complete
[ 230.407729] usb-storage: Bulk command transfer result=0
[ 230.407734] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 230.439751] usb-storage: Status code 0; transferred 4096/4096
[ 230.439755] usb-storage: -- transfer complete
[ 230.439759] usb-storage: Bulk data transfer result 0x0
[ 230.439763] usb-storage: Attempting to get CSW...
[ 230.439768] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 230.444726] usb-storage: Status code 0; transferred 13/13
[ 230.444730] usb-storage: -- transfer complete
[ 230.444734] usb-storage: Bulk status result = 0
[ 230.444739] usb-storage: Bulk Status S 0x53425355 T 0x7ba R 0 Stat 0x0
[ 230.444745] usb-storage: scsi cmd done, result=0x0
[ 230.444751] usb-storage: *** thread sleeping.
[ 230.444769] usb-storage: queuecommand called
[ 230.444782] usb-storage: *** thread awakened.
[ 230.444788] usb-storage: Command WRITE_10 (10 bytes)
[ 230.444791] usb-storage: 2a 00 00 c5 80 3f 00 00 08 00
[ 230.444810] usb-storage: Bulk Command S 0x43425355 T 0x7bb L 4096 F 0 Trg 0 LUN 0 CL 10
[ 230.444815] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 230.445735] usb-storage: Status code 0; transferred 31/31
[ 230.445739] usb-storage: -- transfer complete
[ 230.445743] usb-storage: Bulk command transfer result=0
[ 230.445748] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 230.450753] usb-storage: Status code 0; transferred 4096/4096
[ 230.450757] usb-storage: -- transfer complete
[ 230.450761] usb-storage: Bulk data transfer result 0x0
[ 230.450765] usb-storage: Attempting to get CSW...
[ 230.450770] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 230.451720] usb-storage: Status code 0; transferred 13/13
[ 230.451724] usb-storage: -- transfer complete
[ 230.451728] usb-storage: Bulk status result = 0
[ 230.451733] usb-storage: Bulk Status S 0x53425355 T 0x7bb R 0 Stat 0x0
[ 230.451738] usb-storage: scsi cmd done, result=0x0
[ 230.451744] usb-storage: *** thread sleeping.
[ 230.451760] usb-storage: queuecommand called
[ 230.451773] usb-storage: *** thread awakened.
[ 230.451777] usb-storage: Command WRITE_10 (10 bytes)
[ 230.451781] usb-storage: 2a 00 00 00 00 3f 00 00 08 00
[ 230.451799] usb-storage: Bulk Command S 0x43425355 T 0x7bc L 4096 F 0 Trg 0 LUN 0 CL 10
[ 230.451805] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 230.452716] usb-storage: Status code 0; transferred 31/31
[ 230.452720] usb-storage: -- transfer complete
[ 230.452724] usb-storage: Bulk command transfer result=0
[ 230.452730] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 230.457742] usb-storage: Status code 0; transferred 4096/4096
[ 230.457747] usb-storage: -- transfer complete
[ 230.457751] usb-storage: Bulk data transfer result 0x0
[ 230.457755] usb-storage: Attempting to get CSW...
[ 230.457759] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 230.458744] usb-storage: Status code 0; transferred 13/13
[ 230.458749] usb-storage: -- transfer complete
[ 230.458753] usb-storage: Bulk status result = 0
[ 230.458758] usb-storage: Bulk Status S 0x53425355 T 0x7bc R 0 Stat 0x0
[ 230.458763] usb-storage: scsi cmd done, result=0x0
[ 230.458769] usb-storage: *** thread sleeping.
[ 230.458785] usb-storage: queuecommand called
[ 230.458798] usb-storage: *** thread awakened.
[ 230.458803] usb-storage: Command WRITE_10 (10 bytes)
[ 230.458806] usb-storage: 2a 00 00 40 00 47 00 00 18 00
[ 230.458824] usb-storage: Bulk Command S 0x43425355 T 0x7bd L 12288 F 0 Trg 0 LUN 0 CL 10
[ 230.458830] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 230.459733] usb-storage: Status code 0; transferred 31/31
[ 230.459737] usb-storage: -- transfer complete
[ 230.459741] usb-storage: Bulk command transfer result=0
[ 230.459747] usb-storage: usb_stor_bulk_transfer_sglist: xfer 12288 bytes, 3 entries
[ 230.712747] usb-storage: Status code 0; transferred 12288/12288
[ 230.712752] usb-storage: -- transfer complete
[ 230.712756] usb-storage: Bulk data transfer result 0x0
[ 230.712760] usb-storage: Attempting to get CSW...
[ 230.712764] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 230.737740] usb-storage: Status code 0; transferred 13/13
[ 230.737745] usb-storage: -- transfer complete
[ 230.737749] usb-storage: Bulk status result = 0
[ 230.737754] usb-storage: Bulk Status S 0x53425355 T 0x7bd R 0 Stat 0x0
[ 230.737759] usb-storage: scsi cmd done, result=0x0
[ 230.737765] usb-storage: *** thread sleeping.
[ 230.737786] usb-storage: queuecommand called
[ 230.737799] usb-storage: *** thread awakened.
[ 230.737804] usb-storage: Command WRITE_10 (10 bytes)
[ 230.737807] usb-storage: 2a 00 00 43 c0 3f 00 00 08 00
[ 230.737826] usb-storage: Bulk Command S 0x43425355 T 0x7be L 4096 F 0 Trg 0 LUN 0 CL 10
[ 230.737831] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 230.738728] usb-storage: Status code 0; transferred 31/31
[ 230.738732] usb-storage: -- transfer complete
[ 230.738737] usb-storage: Bulk command transfer result=0
[ 230.738742] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 230.743737] usb-storage: Status code 0; transferred 4096/4096
[ 230.743742] usb-storage: -- transfer complete
[ 230.743746] usb-storage: Bulk data transfer result 0x0
[ 230.743750] usb-storage: Attempting to get CSW...
[ 230.743755] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 230.744727] usb-storage: Status code 0; transferred 13/13
[ 230.744731] usb-storage: -- transfer complete
[ 230.744735] usb-storage: Bulk status result = 0
[ 230.744741] usb-storage: Bulk Status S 0x53425355 T 0x7be R 0 Stat 0x0
[ 230.744745] usb-storage: scsi cmd done, result=0x0
[ 230.744751] usb-storage: *** thread sleeping.
[ 230.744768] usb-storage: queuecommand called
[ 230.744782] usb-storage: *** thread awakened.
[ 230.744786] usb-storage: Command WRITE_10 (10 bytes)
[ 230.744790] usb-storage: 2a 00 00 5c 00 3f 00 00 08 00
[ 230.744808] usb-storage: Bulk Command S 0x43425355 T 0x7bf L 4096 F 0 Trg 0 LUN 0 CL 10
[ 230.744814] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 230.745722] usb-storage: Status code 0; transferred 31/31
[ 230.745726] usb-storage: -- transfer complete
[ 230.745730] usb-storage: Bulk command transfer result=0
[ 230.745735] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 231.126762] usb-storage: Status code 0; transferred 4096/4096
[ 231.126766] usb-storage: -- transfer complete
[ 231.126770] usb-storage: Bulk data transfer result 0x0
[ 231.126774] usb-storage: Attempting to get CSW...
[ 231.126778] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 231.151729] usb-storage: Status code 0; transferred 13/13
[ 231.151733] usb-storage: -- transfer complete
[ 231.151737] usb-storage: Bulk status result = 0
[ 231.151742] usb-storage: Bulk Status S 0x53425355 T 0x7bf R 0 Stat 0x0
[ 231.151747] usb-storage: scsi cmd done, result=0x0
[ 231.151753] usb-storage: *** thread sleeping.
[ 231.151772] usb-storage: queuecommand called
[ 231.151781] usb-storage: *** thread awakened.
[ 231.151786] usb-storage: Command WRITE_10 (10 bytes)
[ 231.151790] usb-storage: 2a 00 00 74 1a e7 00 00 48 00
[ 231.151808] usb-storage: Bulk Command S 0x43425355 T 0x7c0 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 231.151814] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 231.152717] usb-storage: Status code 0; transferred 31/31
[ 231.152722] usb-storage: -- transfer complete
[ 231.152726] usb-storage: Bulk command transfer result=0
[ 231.152731] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 231.495752] usb-storage: Status code 0; transferred 36864/36864
[ 231.495756] usb-storage: -- transfer complete
[ 231.495760] usb-storage: Bulk data transfer result 0x0
[ 231.495764] usb-storage: Attempting to get CSW...
[ 231.495769] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 231.497720] usb-storage: Status code 0; transferred 13/13
[ 231.497724] usb-storage: -- transfer complete
[ 231.497728] usb-storage: Bulk status result = 0
[ 231.497733] usb-storage: Bulk Status S 0x53425355 T 0x7c0 R 0 Stat 0x0
[ 231.497738] usb-storage: scsi cmd done, result=0x0
[ 231.497745] usb-storage: *** thread sleeping.
[ 231.497817] usb-storage: queuecommand called
[ 231.497828] usb-storage: *** thread awakened.
[ 231.497833] usb-storage: Command WRITE_10 (10 bytes)
[ 231.497836] usb-storage: 2a 00 00 74 1b 2f 00 00 08 00
[ 231.497855] usb-storage: Bulk Command S 0x43425355 T 0x7c1 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 231.497860] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 231.498725] usb-storage: Status code 0; transferred 31/31
[ 231.498730] usb-storage: -- transfer complete
[ 231.498734] usb-storage: Bulk command transfer result=0
[ 231.498740] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 231.505759] usb-storage: Status code 0; transferred 4096/4096
[ 231.505764] usb-storage: -- transfer complete
[ 231.505768] usb-storage: Bulk data transfer result 0x0
[ 231.505772] usb-storage: Attempting to get CSW...
[ 231.505777] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 231.506735] usb-storage: Status code 0; transferred 13/13
[ 231.506739] usb-storage: -- transfer complete
[ 231.506743] usb-storage: Bulk status result = 0
[ 231.506749] usb-storage: Bulk Status S 0x53425355 T 0x7c1 R 0 Stat 0x0
[ 231.506754] usb-storage: scsi cmd done, result=0x0
[ 231.506761] usb-storage: *** thread sleeping.
[ 250.010046] usb-storage: queuecommand called
[ 250.010062] usb-storage: *** thread awakened.
[ 250.010068] usb-storage: Command WRITE_10 (10 bytes)
[ 250.010072] usb-storage: 2a 00 00 b8 ee 8f 00 00 50 00
[ 250.010093] usb-storage: Bulk Command S 0x43425355 T 0x7c2 L 40960 F 0 Trg 0 LUN 0 CL 10
[ 250.010099] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 250.011729] usb-storage: Status code 0; transferred 31/31
[ 250.011733] usb-storage: -- transfer complete
[ 250.011737] usb-storage: Bulk command transfer result=0
[ 250.011743] usb-storage: usb_stor_bulk_transfer_sglist: xfer 40960 bytes, 10 entries
[ 250.175757] usb-storage: Status code 0; transferred 40960/40960
[ 250.175762] usb-storage: -- transfer complete
[ 250.175766] usb-storage: Bulk data transfer result 0x0
[ 250.175770] usb-storage: Attempting to get CSW...
[ 250.175775] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 250.201732] usb-storage: Status code 0; transferred 13/13
[ 250.201737] usb-storage: -- transfer complete
[ 250.201741] usb-storage: Bulk status result = 0
[ 250.201747] usb-storage: Bulk Status S 0x53425355 T 0x7c2 R 0 Stat 0x0
[ 250.201753] usb-storage: scsi cmd done, result=0x0
[ 250.201761] usb-storage: *** thread sleeping.
[ 250.201806] usb-storage: queuecommand called
[ 250.201816] usb-storage: *** thread awakened.
[ 250.201822] usb-storage: Command WRITE_10 (10 bytes)
[ 250.201825] usb-storage: 2a 00 00 74 1b 37 00 00 48 00
[ 250.201844] usb-storage: Bulk Command S 0x43425355 T 0x7c3 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 250.201850] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 250.202731] usb-storage: Status code 0; transferred 31/31
[ 250.202736] usb-storage: -- transfer complete
[ 250.202741] usb-storage: Bulk command transfer result=0
[ 250.202747] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 250.467758] usb-storage: Status code 0; transferred 36864/36864
[ 250.467763] usb-storage: -- transfer complete
[ 250.467768] usb-storage: Bulk data transfer result 0x0
[ 250.467772] usb-storage: Attempting to get CSW...
[ 250.467777] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 250.492743] usb-storage: Status code 0; transferred 13/13
[ 250.492747] usb-storage: -- transfer complete
[ 250.492751] usb-storage: Bulk status result = 0
[ 250.492756] usb-storage: Bulk Status S 0x53425355 T 0x7c3 R 0 Stat 0x0
[ 250.492761] usb-storage: scsi cmd done, result=0x0
[ 250.492769] usb-storage: *** thread sleeping.
[ 250.492851] usb-storage: queuecommand called
[ 250.492862] usb-storage: *** thread awakened.
[ 250.492867] usb-storage: Command WRITE_10 (10 bytes)
[ 250.492871] usb-storage: 2a 00 00 74 1b 7f 00 00 08 00
[ 250.492890] usb-storage: Bulk Command S 0x43425355 T 0x7c4 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 250.492896] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 250.493735] usb-storage: Status code 0; transferred 31/31
[ 250.493740] usb-storage: -- transfer complete
[ 250.493744] usb-storage: Bulk command transfer result=0
[ 250.493750] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 250.499759] usb-storage: Status code 0; transferred 4096/4096
[ 250.499763] usb-storage: -- transfer complete
[ 250.499767] usb-storage: Bulk data transfer result 0x0
[ 250.499771] usb-storage: Attempting to get CSW...
[ 250.499776] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 250.500735] usb-storage: Status code 0; transferred 13/13
[ 250.500739] usb-storage: -- transfer complete
[ 250.500744] usb-storage: Bulk status result = 0
[ 250.500749] usb-storage: Bulk Status S 0x53425355 T 0x7c4 R 0 Stat 0x0
[ 250.500754] usb-storage: scsi cmd done, result=0x0
[ 250.500761] usb-storage: *** thread sleeping.
[ 255.630720] usb-storage: queuecommand called
[ 255.630756] usb-storage: *** thread awakened.
[ 255.630764] usb-storage: Command READ_10 (10 bytes)
[ 255.630768] usb-storage: 28 00 00 09 d9 7f 00 00 20 00
[ 255.630789] usb-storage: Bulk Command S 0x43425355 T 0x7c5 L 16384 F 128 Trg 0 LUN 0 CL 10
[ 255.630795] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 255.632739] usb-storage: Status code 0; transferred 31/31
[ 255.632745] usb-storage: -- transfer complete
[ 255.632750] usb-storage: Bulk command transfer result=0
[ 255.632757] usb-storage: usb_stor_bulk_transfer_sglist: xfer 16384 bytes, 4 entries
[ 255.648752] usb-storage: Status code 0; transferred 16384/16384
[ 255.648757] usb-storage: -- transfer complete
[ 255.648762] usb-storage: Bulk data transfer result 0x0
[ 255.648766] usb-storage: Attempting to get CSW...
[ 255.648771] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 255.649738] usb-storage: Status code 0; transferred 13/13
[ 255.649743] usb-storage: -- transfer complete
[ 255.649747] usb-storage: Bulk status result = 0
[ 255.649752] usb-storage: Bulk Status S 0x53425355 T 0x7c5 R 0 Stat 0x0
[ 255.649757] usb-storage: scsi cmd done, result=0x0
[ 255.649765] usb-storage: *** thread sleeping.
[ 255.649796] usb-storage: queuecommand called
[ 255.649807] usb-storage: *** thread awakened.
[ 255.649812] usb-storage: Command WRITE_10 (10 bytes)
[ 255.649816] usb-storage: 2a 00 00 74 1b 87 00 00 48 00
[ 255.649835] usb-storage: Bulk Command S 0x43425355 T 0x7c6 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 255.649841] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 255.650726] usb-storage: Status code 0; transferred 31/31
[ 255.650731] usb-storage: -- transfer complete
[ 255.650735] usb-storage: Bulk command transfer result=0
[ 255.650741] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 255.839761] usb-storage: Status code 0; transferred 36864/36864
[ 255.839766] usb-storage: -- transfer complete
[ 255.839771] usb-storage: Bulk data transfer result 0x0
[ 255.839775] usb-storage: Attempting to get CSW...
[ 255.839780] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 255.844728] usb-storage: Status code 0; transferred 13/13
[ 255.844733] usb-storage: -- transfer complete
[ 255.844737] usb-storage: Bulk status result = 0
[ 255.844742] usb-storage: Bulk Status S 0x53425355 T 0x7c6 R 0 Stat 0x0
[ 255.844748] usb-storage: scsi cmd done, result=0x0
[ 255.844755] usb-storage: *** thread sleeping.
[ 255.844792] usb-storage: queuecommand called
[ 255.844802] usb-storage: *** thread awakened.
[ 255.844808] usb-storage: Command READ_10 (10 bytes)
[ 255.844811] usb-storage: 28 00 00 09 d9 9f 00 00 20 00
[ 255.844830] usb-storage: Bulk Command S 0x43425355 T 0x7c7 L 16384 F 128 Trg 0 LUN 0 CL 10
[ 255.844836] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 255.845744] usb-storage: Status code 0; transferred 31/31
[ 255.845749] usb-storage: -- transfer complete
[ 255.845753] usb-storage: Bulk command transfer result=0
[ 255.845759] usb-storage: usb_stor_bulk_transfer_sglist: xfer 16384 bytes, 4 entries
[ 255.877747] usb-storage: Status code 0; transferred 16384/16384
[ 255.877750] usb-storage: -- transfer complete
[ 255.877752] usb-storage: Bulk data transfer result 0x0
[ 255.877754] usb-storage: Attempting to get CSW...
[ 255.877756] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 255.878716] usb-storage: Status code 0; transferred 13/13
[ 255.878718] usb-storage: -- transfer complete
[ 255.878720] usb-storage: Bulk status result = 0
[ 255.878723] usb-storage: Bulk Status S 0x53425355 T 0x7c7 R 0 Stat 0x0
[ 255.878726] usb-storage: scsi cmd done, result=0x0
[ 255.878730] usb-storage: *** thread sleeping.
[ 255.878748] usb-storage: queuecommand called
[ 255.878754] usb-storage: *** thread awakened.
[ 255.878756] usb-storage: Command WRITE_10 (10 bytes)
[ 255.878758] usb-storage: 2a 00 00 74 1b cf 00 00 08 00
[ 255.878768] usb-storage: Bulk Command S 0x43425355 T 0x7c8 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 255.878771] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 255.879747] usb-storage: Status code 0; transferred 31/31
[ 255.879751] usb-storage: -- transfer complete
[ 255.879753] usb-storage: Bulk command transfer result=0
[ 255.879756] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 255.884770] usb-storage: Status code 0; transferred 4096/4096
[ 255.884777] usb-storage: -- transfer complete
[ 255.884782] usb-storage: Bulk data transfer result 0x0
[ 255.884787] usb-storage: Attempting to get CSW...
[ 255.884792] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 255.889738] usb-storage: Status code 0; transferred 13/13
[ 255.889743] usb-storage: -- transfer complete
[ 255.889748] usb-storage: Bulk status result = 0
[ 255.889753] usb-storage: Bulk Status S 0x53425355 T 0x7c8 R 0 Stat 0x0
[ 255.889760] usb-storage: scsi cmd done, result=0x0
[ 255.889769] usb-storage: *** thread sleeping.
[ 255.889805] usb-storage: queuecommand called
[ 255.889815] usb-storage: *** thread awakened.
[ 255.889821] usb-storage: Command READ_10 (10 bytes)
[ 255.889825] usb-storage: 28 00 00 28 81 cf 00 00 08 00
[ 255.889846] usb-storage: Bulk Command S 0x43425355 T 0x7c9 L 4096 F 128 Trg 0 LUN 0 CL 10
[ 255.889853] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 255.890737] usb-storage: Status code 0; transferred 31/31
[ 255.890742] usb-storage: -- transfer complete
[ 255.890747] usb-storage: Bulk command transfer result=0
[ 255.890752] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 256.088757] usb-storage: Status code 0; transferred 4096/4096
[ 256.088763] usb-storage: -- transfer complete
[ 256.088767] usb-storage: Bulk data transfer result 0x0
[ 256.088771] usb-storage: Attempting to get CSW...
[ 256.088776] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 256.089733] usb-storage: Status code 0; transferred 13/13
[ 256.089738] usb-storage: -- transfer complete
[ 256.089743] usb-storage: Bulk status result = 0
[ 256.089748] usb-storage: Bulk Status S 0x53425355 T 0x7c9 R 0 Stat 0x0
[ 256.089754] usb-storage: scsi cmd done, result=0x0
[ 256.089761] usb-storage: *** thread sleeping.
[ 256.089920] usb-storage: queuecommand called
[ 256.089933] usb-storage: *** thread awakened.
[ 256.089938] usb-storage: Command READ_10 (10 bytes)
[ 256.089942] usb-storage: 28 00 00 31 e3 e7 00 00 10 00
[ 256.089961] usb-storage: Bulk Command S 0x43425355 T 0x7ca L 8192 F 128 Trg 0 LUN 0 CL 10
[ 256.089967] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 256.090741] usb-storage: Status code 0; transferred 31/31
[ 256.090746] usb-storage: -- transfer complete
[ 256.090750] usb-storage: Bulk command transfer result=0
[ 256.090755] usb-storage: usb_stor_bulk_transfer_sglist: xfer 8192 bytes, 2 entries
[ 256.099757] usb-storage: Status code 0; transferred 8192/8192
[ 256.099762] usb-storage: -- transfer complete
[ 256.099767] usb-storage: Bulk data transfer result 0x0
[ 256.099770] usb-storage: Attempting to get CSW...
[ 256.099776] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 256.100727] usb-storage: Status code 0; transferred 13/13
[ 256.100729] usb-storage: -- transfer complete
[ 256.100731] usb-storage: Bulk status result = 0
[ 256.100734] usb-storage: Bulk Status S 0x53425355 T 0x7ca R 0 Stat 0x0
[ 256.100737] usb-storage: scsi cmd done, result=0x0
[ 256.100741] usb-storage: *** thread sleeping.
[ 256.102553] usb-storage: queuecommand called
[ 256.102564] usb-storage: *** thread awakened.
[ 256.102568] usb-storage: Command READ_10 (10 bytes)
[ 256.102570] usb-storage: 28 00 00 2a c0 97 00 00 08 00
[ 256.102581] usb-storage: Bulk Command S 0x43425355 T 0x7cb L 4096 F 128 Trg 0 LUN 0 CL 10
[ 256.102585] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 256.102730] usb-storage: Status code 0; transferred 31/31
[ 256.102732] usb-storage: -- transfer complete
[ 256.102735] usb-storage: Bulk command transfer result=0
[ 256.102738] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 256.107734] usb-storage: Status code 0; transferred 4096/4096
[ 256.107736] usb-storage: -- transfer complete
[ 256.107738] usb-storage: Bulk data transfer result 0x0
[ 256.107740] usb-storage: Attempting to get CSW...
[ 256.107743] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 256.108724] usb-storage: Status code 0; transferred 13/13
[ 256.108727] usb-storage: -- transfer complete
[ 256.108729] usb-storage: Bulk status result = 0
[ 256.108731] usb-storage: Bulk Status S 0x53425355 T 0x7cb R 0 Stat 0x0
[ 256.108734] usb-storage: scsi cmd done, result=0x0
[ 256.108739] usb-storage: *** thread sleeping.
[ 258.653947] usb-storage: queuecommand called
[ 258.653967] usb-storage: *** thread awakened.
[ 258.653973] usb-storage: Command WRITE_10 (10 bytes)
[ 258.653977] usb-storage: 2a 00 00 b8 7f cf 00 00 08 00
[ 258.653997] usb-storage: Bulk Command S 0x43425355 T 0x7cc L 4096 F 0 Trg 0 LUN 0 CL 10
[ 258.654004] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 258.655731] usb-storage: Status code 0; transferred 31/31
[ 258.655736] usb-storage: -- transfer complete
[ 258.655740] usb-storage: Bulk command transfer result=0
[ 258.655746] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 258.678746] usb-storage: Status code 0; transferred 4096/4096
[ 258.678751] usb-storage: -- transfer complete
[ 258.678755] usb-storage: Bulk data transfer result 0x0
[ 258.678759] usb-storage: Attempting to get CSW...
[ 258.678764] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 258.679727] usb-storage: Status code 0; transferred 13/13
[ 258.679732] usb-storage: -- transfer complete
[ 258.679737] usb-storage: Bulk status result = 0
[ 258.679743] usb-storage: Bulk Status S 0x53425355 T 0x7cc R 0 Stat 0x0
[ 258.679748] usb-storage: scsi cmd done, result=0x0
[ 258.679756] usb-storage: *** thread sleeping.
[ 258.679784] usb-storage: queuecommand called
[ 258.679795] usb-storage: *** thread awakened.
[ 258.679800] usb-storage: Command WRITE_10 (10 bytes)
[ 258.679804] usb-storage: 2a 00 00 74 1b d7 00 00 70 00
[ 258.679823] usb-storage: Bulk Command S 0x43425355 T 0x7cd L 57344 F 0 Trg 0 LUN 0 CL 10
[ 258.679829] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 258.680721] usb-storage: Status code 0; transferred 31/31
[ 258.680725] usb-storage: -- transfer complete
[ 258.680729] usb-storage: Bulk command transfer result=0
[ 258.680735] usb-storage: usb_stor_bulk_transfer_sglist: xfer 57344 bytes, 14 entries
[ 259.107780] usb-storage: Status code 0; transferred 57344/57344
[ 259.107785] usb-storage: -- transfer complete
[ 259.107789] usb-storage: Bulk data transfer result 0x0
[ 259.107793] usb-storage: Attempting to get CSW...
[ 259.107798] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 259.109724] usb-storage: Status code 0; transferred 13/13
[ 259.109728] usb-storage: -- transfer complete
[ 259.109732] usb-storage: Bulk status result = 0
[ 259.109737] usb-storage: Bulk Status S 0x53425355 T 0x7cd R 0 Stat 0x0
[ 259.109742] usb-storage: scsi cmd done, result=0x0
[ 259.109749] usb-storage: *** thread sleeping.
[ 259.109845] usb-storage: queuecommand called
[ 259.109875] usb-storage: *** thread awakened.
[ 259.109881] usb-storage: Command WRITE_10 (10 bytes)
[ 259.109885] usb-storage: 2a 00 00 74 1c 47 00 00 08 00
[ 259.109904] usb-storage: Bulk Command S 0x43425355 T 0x7ce L 4096 F 0 Trg 0 LUN 0 CL 10
[ 259.109909] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 259.110722] usb-storage: Status code 0; transferred 31/31
[ 259.110726] usb-storage: -- transfer complete
[ 259.110730] usb-storage: Bulk command transfer result=0
[ 259.110736] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 259.117749] usb-storage: Status code 0; transferred 4096/4096
[ 259.117753] usb-storage: -- transfer complete
[ 259.117758] usb-storage: Bulk data transfer result 0x0
[ 259.117761] usb-storage: Attempting to get CSW...
[ 259.117766] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 259.119723] usb-storage: Status code 0; transferred 13/13
[ 259.119728] usb-storage: -- transfer complete
[ 259.119731] usb-storage: Bulk status result = 0
[ 259.119737] usb-storage: Bulk Status S 0x53425355 T 0x7ce R 0 Stat 0x0
[ 259.119741] usb-storage: scsi cmd done, result=0x0
[ 259.119748] usb-storage: *** thread sleeping.
[ 260.010039] usb-storage: queuecommand called
[ 260.010053] usb-storage: *** thread awakened.
[ 260.010059] usb-storage: Command WRITE_10 (10 bytes)
[ 260.010063] usb-storage: 2a 00 00 b8 ba 3f 00 00 70 00
[ 260.010082] usb-storage: Bulk Command S 0x43425355 T 0x7cf L 57344 F 0 Trg 0 LUN 0 CL 10
[ 260.010088] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 260.011725] usb-storage: Status code 0; transferred 31/31
[ 260.011730] usb-storage: -- transfer complete
[ 260.011733] usb-storage: Bulk command transfer result=0
[ 260.011739] usb-storage: usb_stor_bulk_transfer_sglist: xfer 57344 bytes, 14 entries
[ 260.174761] usb-storage: Status code 0; transferred 57344/57344
[ 260.174766] usb-storage: -- transfer complete
[ 260.174771] usb-storage: Bulk data transfer result 0x0
[ 260.174775] usb-storage: Attempting to get CSW...
[ 260.174780] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 260.200736] usb-storage: Status code 0; transferred 13/13
[ 260.200741] usb-storage: -- transfer complete
[ 260.200745] usb-storage: Bulk status result = 0
[ 260.200751] usb-storage: Bulk Status S 0x53425355 T 0x7cf R 0 Stat 0x0
[ 260.200756] usb-storage: scsi cmd done, result=0x0
[ 260.200763] usb-storage: *** thread sleeping.
[ 260.200815] usb-storage: queuecommand called
[ 260.200826] usb-storage: *** thread awakened.
[ 260.200832] usb-storage: Command WRITE_10 (10 bytes)
[ 260.200835] usb-storage: 2a 00 00 b8 e7 a7 00 00 70 00
[ 260.200854] usb-storage: Bulk Command S 0x43425355 T 0x7d0 L 57344 F 0 Trg 0 LUN 0 CL 10
[ 260.200860] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 260.201746] usb-storage: Status code 0; transferred 31/31
[ 260.201751] usb-storage: -- transfer complete
[ 260.201755] usb-storage: Bulk command transfer result=0
[ 260.201761] usb-storage: usb_stor_bulk_transfer_sglist: xfer 57344 bytes, 14 entries
[ 260.495763] usb-storage: Status code 0; transferred 57344/57344
[ 260.495769] usb-storage: -- transfer complete
[ 260.495773] usb-storage: Bulk data transfer result 0x0
[ 260.495777] usb-storage: Attempting to get CSW...
[ 260.495782] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 260.497723] usb-storage: Status code 0; transferred 13/13
[ 260.497728] usb-storage: -- transfer complete
[ 260.497731] usb-storage: Bulk status result = 0
[ 260.497737] usb-storage: Bulk Status S 0x53425355 T 0x7d0 R 0 Stat 0x0
[ 260.497742] usb-storage: scsi cmd done, result=0x0
[ 260.497749] usb-storage: *** thread sleeping.
[ 261.093274] usb-storage: queuecommand called
[ 261.093314] usb-storage: *** thread awakened.
[ 261.093321] usb-storage: Command WRITE_10 (10 bytes)
[ 261.093324] usb-storage: 2a 00 00 b8 7f cf 00 00 08 00
[ 261.093344] usb-storage: Bulk Command S 0x43425355 T 0x7d1 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 261.093350] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 261.094753] usb-storage: Status code 0; transferred 31/31
[ 261.094758] usb-storage: -- transfer complete
[ 261.094762] usb-storage: Bulk command transfer result=0
[ 261.094768] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 261.099744] usb-storage: Status code 0; transferred 4096/4096
[ 261.099748] usb-storage: -- transfer complete
[ 261.099753] usb-storage: Bulk data transfer result 0x0
[ 261.099756] usb-storage: Attempting to get CSW...
[ 261.099761] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 261.104740] usb-storage: Status code 0; transferred 13/13
[ 261.104748] usb-storage: -- transfer complete
[ 261.104753] usb-storage: Bulk status result = 0
[ 261.104759] usb-storage: Bulk Status S 0x53425355 T 0x7d1 R 0 Stat 0x0
[ 261.104765] usb-storage: scsi cmd done, result=0x0
[ 261.104774] usb-storage: *** thread sleeping.
[ 261.104813] usb-storage: queuecommand called
[ 261.104824] usb-storage: *** thread awakened.
[ 261.104830] usb-storage: Command WRITE_10 (10 bytes)
[ 261.104833] usb-storage: 2a 00 00 74 1c 4f 00 00 50 00
[ 261.104853] usb-storage: Bulk Command S 0x43425355 T 0x7d2 L 40960 F 0 Trg 0 LUN 0 CL 10
[ 261.104860] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 261.105737] usb-storage: Status code 0; transferred 31/31
[ 261.105742] usb-storage: -- transfer complete
[ 261.105746] usb-storage: Bulk command transfer result=0
[ 261.105751] usb-storage: usb_stor_bulk_transfer_sglist: xfer 40960 bytes, 10 entries
[ 261.358758] usb-storage: Status code 0; transferred 40960/40960
[ 261.358763] usb-storage: -- transfer complete
[ 261.358768] usb-storage: Bulk data transfer result 0x0
[ 261.358772] usb-storage: Attempting to get CSW...
[ 261.358777] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 261.359732] usb-storage: Status code 0; transferred 13/13
[ 261.359736] usb-storage: -- transfer complete
[ 261.359740] usb-storage: Bulk status result = 0
[ 261.359746] usb-storage: Bulk Status S 0x53425355 T 0x7d2 R 0 Stat 0x0
[ 261.359751] usb-storage: scsi cmd done, result=0x0
[ 261.359757] usb-storage: *** thread sleeping.
[ 261.359853] usb-storage: queuecommand called
[ 261.359865] usb-storage: *** thread awakened.
[ 261.359870] usb-storage: Command WRITE_10 (10 bytes)
[ 261.359873] usb-storage: 2a 00 00 74 1c 9f 00 00 08 00
[ 261.359892] usb-storage: Bulk Command S 0x43425355 T 0x7d3 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 261.359898] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 261.360740] usb-storage: Status code 0; transferred 31/31
[ 261.360745] usb-storage: -- transfer complete
[ 261.360750] usb-storage: Bulk command transfer result=0
[ 261.360756] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 261.366756] usb-storage: Status code 0; transferred 4096/4096
[ 261.366760] usb-storage: -- transfer complete
[ 261.366764] usb-storage: Bulk data transfer result 0x0
[ 261.366768] usb-storage: Attempting to get CSW...
[ 261.366773] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 261.367741] usb-storage: Status code 0; transferred 13/13
[ 261.367745] usb-storage: -- transfer complete
[ 261.367749] usb-storage: Bulk status result = 0
[ 261.367754] usb-storage: Bulk Status S 0x53425355 T 0x7d3 R 0 Stat 0x0
[ 261.367759] usb-storage: scsi cmd done, result=0x0
[ 261.367766] usb-storage: *** thread sleeping.
[ 261.367983] usb-storage: queuecommand called
[ 261.367996] usb-storage: *** thread awakened.
[ 261.368001] usb-storage: Command WRITE_10 (10 bytes)
[ 261.368005] usb-storage: 2a 00 00 b8 7f cf 00 00 08 00
[ 261.368024] usb-storage: Bulk Command S 0x43425355 T 0x7d4 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 261.368030] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 261.368729] usb-storage: Status code 0; transferred 31/31
[ 261.368734] usb-storage: -- transfer complete
[ 261.368738] usb-storage: Bulk command transfer result=0
[ 261.368743] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 261.558754] usb-storage: Status code 0; transferred 4096/4096
[ 261.558758] usb-storage: -- transfer complete
[ 261.558762] usb-storage: Bulk data transfer result 0x0
[ 261.558766] usb-storage: Attempting to get CSW...
[ 261.558771] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 261.583731] usb-storage: Status code 0; transferred 13/13
[ 261.583736] usb-storage: -- transfer complete
[ 261.583740] usb-storage: Bulk status result = 0
[ 261.583745] usb-storage: Bulk Status S 0x53425355 T 0x7d4 R 0 Stat 0x0
[ 261.583750] usb-storage: scsi cmd done, result=0x0
[ 261.583757] usb-storage: *** thread sleeping.
[ 261.583780] usb-storage: queuecommand called
[ 261.583790] usb-storage: *** thread awakened.
[ 261.583795] usb-storage: Command WRITE_10 (10 bytes)
[ 261.583799] usb-storage: 2a 00 00 74 1c a7 00 00 10 00
[ 261.583817] usb-storage: Bulk Command S 0x43425355 T 0x7d5 L 8192 F 0 Trg 0 LUN 0 CL 10
[ 261.583823] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 261.584744] usb-storage: Status code 0; transferred 31/31
[ 261.584748] usb-storage: -- transfer complete
[ 261.584752] usb-storage: Bulk command transfer result=0
[ 261.584758] usb-storage: usb_stor_bulk_transfer_sglist: xfer 8192 bytes, 2 entries
[ 261.823749] usb-storage: Status code 0; transferred 8192/8192
[ 261.823753] usb-storage: -- transfer complete
[ 261.823758] usb-storage: Bulk data transfer result 0x0
[ 261.823761] usb-storage: Attempting to get CSW...
[ 261.823766] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 261.825723] usb-storage: Status code 0; transferred 13/13
[ 261.825727] usb-storage: -- transfer complete
[ 261.825731] usb-storage: Bulk status result = 0
[ 261.825736] usb-storage: Bulk Status S 0x53425355 T 0x7d5 R 0 Stat 0x0
[ 261.825741] usb-storage: scsi cmd done, result=0x0
[ 261.825748] usb-storage: *** thread sleeping.
[ 261.825816] usb-storage: queuecommand called
[ 261.825844] usb-storage: *** thread awakened.
[ 261.825850] usb-storage: Command WRITE_10 (10 bytes)
[ 261.825853] usb-storage: 2a 00 00 74 1c b7 00 00 08 00
[ 261.825872] usb-storage: Bulk Command S 0x43425355 T 0x7d6 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 261.825878] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 261.826739] usb-storage: Status code 0; transferred 31/31
[ 261.826744] usb-storage: -- transfer complete
[ 261.826748] usb-storage: Bulk command transfer result=0
[ 261.826753] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 261.831756] usb-storage: Status code 0; transferred 4096/4096
[ 261.831761] usb-storage: -- transfer complete
[ 261.831766] usb-storage: Bulk data transfer result 0x0
[ 261.831771] usb-storage: Attempting to get CSW...
[ 261.831777] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 261.833734] usb-storage: Status code 0; transferred 13/13
[ 261.833740] usb-storage: -- transfer complete
[ 261.833745] usb-storage: Bulk status result = 0
[ 261.833751] usb-storage: Bulk Status S 0x53425355 T 0x7d6 R 0 Stat 0x0
[ 261.833758] usb-storage: scsi cmd done, result=0x0
[ 261.833765] usb-storage: *** thread sleeping.
[ 261.833950] usb-storage: queuecommand called
[ 261.833964] usb-storage: *** thread awakened.
[ 261.833970] usb-storage: Command WRITE_10 (10 bytes)
[ 261.833975] usb-storage: 2a 00 00 b8 7f cf 00 00 08 00
[ 261.833998] usb-storage: Bulk Command S 0x43425355 T 0x7d7 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 261.834005] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 261.834743] usb-storage: Status code 0; transferred 31/31
[ 261.834749] usb-storage: -- transfer complete
[ 261.834754] usb-storage: Bulk command transfer result=0
[ 261.834761] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 262.022754] usb-storage: Status code 0; transferred 4096/4096
[ 262.022758] usb-storage: -- transfer complete
[ 262.022763] usb-storage: Bulk data transfer result 0x0
[ 262.022766] usb-storage: Attempting to get CSW...
[ 262.022771] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 262.047730] usb-storage: Status code 0; transferred 13/13
[ 262.047734] usb-storage: -- transfer complete
[ 262.047738] usb-storage: Bulk status result = 0
[ 262.047743] usb-storage: Bulk Status S 0x53425355 T 0x7d7 R 0 Stat 0x0
[ 262.047748] usb-storage: scsi cmd done, result=0x0
[ 262.047755] usb-storage: *** thread sleeping.
[ 262.047777] usb-storage: queuecommand called
[ 262.047787] usb-storage: *** thread awakened.
[ 262.047791] usb-storage: Command WRITE_10 (10 bytes)
[ 262.047795] usb-storage: 2a 00 00 74 1c bf 00 00 10 00
[ 262.047813] usb-storage: Bulk Command S 0x43425355 T 0x7d8 L 8192 F 0 Trg 0 LUN 0 CL 10
[ 262.047819] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 262.048731] usb-storage: Status code 0; transferred 31/31
[ 262.048735] usb-storage: -- transfer complete
[ 262.048739] usb-storage: Bulk command transfer result=0
[ 262.048745] usb-storage: usb_stor_bulk_transfer_sglist: xfer 8192 bytes, 2 entries
[ 262.290077] usb-storage: Status code 0; transferred 8192/8192
[ 262.290081] usb-storage: -- transfer complete
[ 262.290086] usb-storage: Bulk data transfer result 0x0
[ 262.290089] usb-storage: Attempting to get CSW...
[ 262.290094] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 262.292721] usb-storage: Status code 0; transferred 13/13
[ 262.292725] usb-storage: -- transfer complete
[ 262.292729] usb-storage: Bulk status result = 0
[ 262.292735] usb-storage: Bulk Status S 0x53425355 T 0x7d8 R 0 Stat 0x0
[ 262.292740] usb-storage: scsi cmd done, result=0x0
[ 262.292746] usb-storage: *** thread sleeping.
[ 262.292794] usb-storage: queuecommand called
[ 262.292805] usb-storage: *** thread awakened.
[ 262.292810] usb-storage: Command WRITE_10 (10 bytes)
[ 262.292814] usb-storage: 2a 00 00 74 1c cf 00 00 08 00
[ 262.292832] usb-storage: Bulk Command S 0x43425355 T 0x7d9 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 262.292838] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 262.293742] usb-storage: Status code 0; transferred 31/31
[ 262.293748] usb-storage: -- transfer complete
[ 262.293753] usb-storage: Bulk command transfer result=0
[ 262.293759] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 262.299764] usb-storage: Status code 0; transferred 4096/4096
[ 262.299768] usb-storage: -- transfer complete
[ 262.299772] usb-storage: Bulk data transfer result 0x0
[ 262.299776] usb-storage: Attempting to get CSW...
[ 262.299780] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 262.301739] usb-storage: Status code 0; transferred 13/13
[ 262.301743] usb-storage: -- transfer complete
[ 262.301747] usb-storage: Bulk status result = 0
[ 262.301753] usb-storage: Bulk Status S 0x53425355 T 0x7d9 R 0 Stat 0x0
[ 262.301758] usb-storage: scsi cmd done, result=0x0
[ 262.301764] usb-storage: *** thread sleeping.
[ 268.012645] usb-storage: queuecommand called
[ 268.012659] usb-storage: *** thread awakened.
[ 268.012665] usb-storage: Command WRITE_10 (10 bytes)
[ 268.012669] usb-storage: 2a 00 00 74 1c d7 00 00 48 00
[ 268.012688] usb-storage: Bulk Command S 0x43425355 T 0x7da L 36864 F 0 Trg 0 LUN 0 CL 10
[ 268.012694] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 268.014729] usb-storage: Status code 0; transferred 31/31
[ 268.014733] usb-storage: -- transfer complete
[ 268.014737] usb-storage: Bulk command transfer result=0
[ 268.014743] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 268.084761] usb-storage: Status code 0; transferred 36864/36864
[ 268.084766] usb-storage: -- transfer complete
[ 268.084770] usb-storage: Bulk data transfer result 0x0
[ 268.084774] usb-storage: Attempting to get CSW...
[ 268.084779] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 268.088732] usb-storage: Status code 0; transferred 13/13
[ 268.088736] usb-storage: -- transfer complete
[ 268.088741] usb-storage: Bulk status result = 0
[ 268.088746] usb-storage: Bulk Status S 0x53425355 T 0x7da R 0 Stat 0x0
[ 268.088751] usb-storage: scsi cmd done, result=0x0
[ 268.088758] usb-storage: *** thread sleeping.
[ 268.088850] usb-storage: queuecommand called
[ 268.088879] usb-storage: *** thread awakened.
[ 268.088885] usb-storage: Command WRITE_10 (10 bytes)
[ 268.088889] usb-storage: 2a 00 00 74 1d 1f 00 00 08 00
[ 268.088907] usb-storage: Bulk Command S 0x43425355 T 0x7db L 4096 F 0 Trg 0 LUN 0 CL 10
[ 268.088913] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 268.089729] usb-storage: Status code 0; transferred 31/31
[ 268.089734] usb-storage: -- transfer complete
[ 268.089738] usb-storage: Bulk command transfer result=0
[ 268.089744] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 268.095756] usb-storage: Status code 0; transferred 4096/4096
[ 268.095761] usb-storage: -- transfer complete
[ 268.095767] usb-storage: Bulk data transfer result 0x0
[ 268.095771] usb-storage: Attempting to get CSW...
[ 268.095775] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 268.096742] usb-storage: Status code 0; transferred 13/13
[ 268.096747] usb-storage: -- transfer complete
[ 268.096750] usb-storage: Bulk status result = 0
[ 268.096756] usb-storage: Bulk Status S 0x53425355 T 0x7db R 0 Stat 0x0
[ 268.096762] usb-storage: scsi cmd done, result=0x0
[ 268.096769] usb-storage: *** thread sleeping.
[ 285.000426] usb-storage: queuecommand called
[ 285.000461] usb-storage: *** thread awakened.
[ 285.000470] usb-storage: Command WRITE_10 (10 bytes)
[ 285.000474] usb-storage: 2a 00 00 b8 ee d7 00 00 68 00
[ 285.000494] usb-storage: Bulk Command S 0x43425355 T 0x7dc L 53248 F 0 Trg 0 LUN 0 CL 10
[ 285.000500] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 285.001733] usb-storage: Status code 0; transferred 31/31
[ 285.001737] usb-storage: -- transfer complete
[ 285.001741] usb-storage: Bulk command transfer result=0
[ 285.001747] usb-storage: usb_stor_bulk_transfer_sglist: xfer 53248 bytes, 13 entries
[ 285.190786] usb-storage: Status code 0; transferred 53248/53248
[ 285.190791] usb-storage: -- transfer complete
[ 285.190796] usb-storage: Bulk data transfer result 0x0
[ 285.190800] usb-storage: Attempting to get CSW...
[ 285.190805] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 285.216738] usb-storage: Status code 0; transferred 13/13
[ 285.216742] usb-storage: -- transfer complete
[ 285.216746] usb-storage: Bulk status result = 0
[ 285.216752] usb-storage: Bulk Status S 0x53425355 T 0x7dc R 0 Stat 0x0
[ 285.216757] usb-storage: scsi cmd done, result=0x0
[ 285.216765] usb-storage: *** thread sleeping.
[ 285.216815] usb-storage: queuecommand called
[ 285.216832] usb-storage: *** thread awakened.
[ 285.216838] usb-storage: Command WRITE_10 (10 bytes)
[ 285.216841] usb-storage: 2a 00 00 b4 01 07 00 00 08 00
[ 285.216860] usb-storage: Bulk Command S 0x43425355 T 0x7dd L 4096 F 0 Trg 0 LUN 0 CL 10
[ 285.216866] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 285.217743] usb-storage: Status code 0; transferred 31/31
[ 285.217747] usb-storage: -- transfer complete
[ 285.217751] usb-storage: Bulk command transfer result=0
[ 285.217756] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 285.294771] usb-storage: Status code 0; transferred 4096/4096
[ 285.294775] usb-storage: -- transfer complete
[ 285.294779] usb-storage: Bulk data transfer result 0x0
[ 285.294783] usb-storage: Attempting to get CSW...
[ 285.294788] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 285.317735] usb-storage: Status code 0; transferred 13/13
[ 285.317739] usb-storage: -- transfer complete
[ 285.317743] usb-storage: Bulk status result = 0
[ 285.317749] usb-storage: Bulk Status S 0x53425355 T 0x7dd R 0 Stat 0x0
[ 285.317754] usb-storage: scsi cmd done, result=0x0
[ 285.317760] usb-storage: *** thread sleeping.
[ 285.317779] usb-storage: queuecommand called
[ 285.317794] usb-storage: *** thread awakened.
[ 285.317799] usb-storage: Command WRITE_10 (10 bytes)
[ 285.317803] usb-storage: 2a 00 00 08 00 5f 00 00 08 00
[ 285.317821] usb-storage: Bulk Command S 0x43425355 T 0x7de L 4096 F 0 Trg 0 LUN 0 CL 10
[ 285.317827] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 285.318745] usb-storage: Status code 0; transferred 31/31
[ 285.318749] usb-storage: -- transfer complete
[ 285.318753] usb-storage: Bulk command transfer result=0
[ 285.318758] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 285.323740] usb-storage: Status code 0; transferred 4096/4096
[ 285.323744] usb-storage: -- transfer complete
[ 285.323749] usb-storage: Bulk data transfer result 0x0
[ 285.323752] usb-storage: Attempting to get CSW...
[ 285.323757] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 285.324745] usb-storage: Status code 0; transferred 13/13
[ 285.324751] usb-storage: -- transfer complete
[ 285.324756] usb-storage: Bulk status result = 0
[ 285.324763] usb-storage: Bulk Status S 0x53425355 T 0x7de R 0 Stat 0x0
[ 285.324769] usb-storage: scsi cmd done, result=0x0
[ 285.324777] usb-storage: *** thread sleeping.
[ 285.324798] usb-storage: queuecommand called
[ 285.324813] usb-storage: *** thread awakened.
[ 285.324819] usb-storage: Command WRITE_10 (10 bytes)
[ 285.324824] usb-storage: 2a 00 00 28 00 7f 00 00 08 00
[ 285.324846] usb-storage: Bulk Command S 0x43425355 T 0x7df L 4096 F 0 Trg 0 LUN 0 CL 10
[ 285.324853] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 285.325739] usb-storage: Status code 0; transferred 31/31
[ 285.325744] usb-storage: -- transfer complete
[ 285.325749] usb-storage: Bulk command transfer result=0
[ 285.325756] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 285.529772] usb-storage: Status code 0; transferred 4096/4096
[ 285.529776] usb-storage: -- transfer complete
[ 285.529780] usb-storage: Bulk data transfer result 0x0
[ 285.529784] usb-storage: Attempting to get CSW...
[ 285.529789] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 285.530723] usb-storage: Status code 0; transferred 13/13
[ 285.530727] usb-storage: -- transfer complete
[ 285.530731] usb-storage: Bulk status result = 0
[ 285.530737] usb-storage: Bulk Status S 0x53425355 T 0x7df R 0 Stat 0x0
[ 285.530742] usb-storage: scsi cmd done, result=0x0
[ 285.530747] usb-storage: *** thread sleeping.
[ 285.530766] usb-storage: queuecommand called
[ 285.530779] usb-storage: *** thread awakened.
[ 285.530784] usb-storage: Command WRITE_10 (10 bytes)
[ 285.530788] usb-storage: 2a 00 00 28 00 a7 00 00 08 00
[ 285.530806] usb-storage: Bulk Command S 0x43425355 T 0x7e0 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 285.530812] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 285.531739] usb-storage: Status code 0; transferred 31/31
[ 285.531743] usb-storage: -- transfer complete
[ 285.531747] usb-storage: Bulk command transfer result=0
[ 285.531752] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 285.536762] usb-storage: Status code 0; transferred 4096/4096
[ 285.536766] usb-storage: -- transfer complete
[ 285.536770] usb-storage: Bulk data transfer result 0x0
[ 285.536774] usb-storage: Attempting to get CSW...
[ 285.536779] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 285.538727] usb-storage: Status code 0; transferred 13/13
[ 285.538731] usb-storage: -- transfer complete
[ 285.538735] usb-storage: Bulk status result = 0
[ 285.538740] usb-storage: Bulk Status S 0x53425355 T 0x7e0 R 0 Stat 0x0
[ 285.538745] usb-storage: scsi cmd done, result=0x0
[ 285.538751] usb-storage: *** thread sleeping.
[ 285.538768] usb-storage: queuecommand called
[ 285.538781] usb-storage: *** thread awakened.
[ 285.538786] usb-storage: Command WRITE_10 (10 bytes)
[ 285.538790] usb-storage: 2a 00 00 30 00 bf 00 00 08 00
[ 285.538808] usb-storage: Bulk Command S 0x43425355 T 0x7e1 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 285.538814] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 285.539743] usb-storage: Status code 0; transferred 31/31
[ 285.539747] usb-storage: -- transfer complete
[ 285.539751] usb-storage: Bulk command transfer result=0
[ 285.539756] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 285.740755] usb-storage: Status code 0; transferred 4096/4096
[ 285.740759] usb-storage: -- transfer complete
[ 285.740764] usb-storage: Bulk data transfer result 0x0
[ 285.740767] usb-storage: Attempting to get CSW...
[ 285.740772] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 285.741733] usb-storage: Status code 0; transferred 13/13
[ 285.741737] usb-storage: -- transfer complete
[ 285.741741] usb-storage: Bulk status result = 0
[ 285.741746] usb-storage: Bulk Status S 0x53425355 T 0x7e1 R 0 Stat 0x0
[ 285.741751] usb-storage: scsi cmd done, result=0x0
[ 285.741757] usb-storage: *** thread sleeping.
[ 285.741777] usb-storage: queuecommand called
[ 285.741787] usb-storage: *** thread awakened.
[ 285.741791] usb-storage: Command WRITE_10 (10 bytes)
[ 285.741795] usb-storage: 2a 00 00 74 1d 27 00 00 48 00
[ 285.741813] usb-storage: Bulk Command S 0x43425355 T 0x7e2 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 285.741819] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 285.742724] usb-storage: Status code 0; transferred 31/31
[ 285.742729] usb-storage: -- transfer complete
[ 285.742733] usb-storage: Bulk command transfer result=0
[ 285.742738] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 286.018759] usb-storage: Status code 0; transferred 36864/36864
[ 286.018764] usb-storage: -- transfer complete
[ 286.018768] usb-storage: Bulk data transfer result 0x0
[ 286.018772] usb-storage: Attempting to get CSW...
[ 286.018777] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 286.020727] usb-storage: Status code 0; transferred 13/13
[ 286.020731] usb-storage: -- transfer complete
[ 286.020735] usb-storage: Bulk status result = 0
[ 286.020741] usb-storage: Bulk Status S 0x53425355 T 0x7e2 R 0 Stat 0x0
[ 286.020746] usb-storage: scsi cmd done, result=0x0
[ 286.020752] usb-storage: *** thread sleeping.
[ 286.020837] usb-storage: queuecommand called
[ 286.020849] usb-storage: *** thread awakened.
[ 286.020854] usb-storage: Command WRITE_10 (10 bytes)
[ 286.020858] usb-storage: 2a 00 00 74 1d 6f 00 00 08 00
[ 286.020876] usb-storage: Bulk Command S 0x43425355 T 0x7e3 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 286.020882] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 286.021741] usb-storage: Status code 0; transferred 31/31
[ 286.021745] usb-storage: -- transfer complete
[ 286.021749] usb-storage: Bulk command transfer result=0
[ 286.021755] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 286.028764] usb-storage: Status code 0; transferred 4096/4096
[ 286.028768] usb-storage: -- transfer complete
[ 286.028772] usb-storage: Bulk data transfer result 0x0
[ 286.028776] usb-storage: Attempting to get CSW...
[ 286.028781] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 286.029742] usb-storage: Status code 0; transferred 13/13
[ 286.029746] usb-storage: -- transfer complete
[ 286.029750] usb-storage: Bulk status result = 0
[ 286.029755] usb-storage: Bulk Status S 0x53425355 T 0x7e3 R 0 Stat 0x0
[ 286.029760] usb-storage: scsi cmd done, result=0x0
[ 286.029768] usb-storage: *** thread sleeping.
[ 290.012644] usb-storage: queuecommand called
[ 290.012677] usb-storage: *** thread awakened.
[ 290.012684] usb-storage: Command WRITE_10 (10 bytes)
[ 290.012688] usb-storage: 2a 00 00 74 1d 77 00 00 48 00
[ 290.012706] usb-storage: Bulk Command S 0x43425355 T 0x7e4 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 290.012712] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 290.014748] usb-storage: Status code 0; transferred 31/31
[ 290.014753] usb-storage: -- transfer complete
[ 290.014757] usb-storage: Bulk command transfer result=0
[ 290.014763] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 290.112768] usb-storage: Status code 0; transferred 36864/36864
[ 290.112774] usb-storage: -- transfer complete
[ 290.112778] usb-storage: Bulk data transfer result 0x0
[ 290.112783] usb-storage: Attempting to get CSW...
[ 290.112788] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 290.117736] usb-storage: Status code 0; transferred 13/13
[ 290.117741] usb-storage: -- transfer complete
[ 290.117745] usb-storage: Bulk status result = 0
[ 290.117750] usb-storage: Bulk Status S 0x53425355 T 0x7e4 R 0 Stat 0x0
[ 290.117755] usb-storage: scsi cmd done, result=0x0
[ 290.117763] usb-storage: *** thread sleeping.
[ 290.117858] usb-storage: queuecommand called
[ 290.117887] usb-storage: *** thread awakened.
[ 290.117893] usb-storage: Command WRITE_10 (10 bytes)
[ 290.117897] usb-storage: 2a 00 00 74 1d bf 00 00 08 00
[ 290.117915] usb-storage: Bulk Command S 0x43425355 T 0x7e5 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 290.117921] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 290.118754] usb-storage: Status code 0; transferred 31/31
[ 290.118758] usb-storage: -- transfer complete
[ 290.118762] usb-storage: Bulk command transfer result=0
[ 290.118768] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 290.124758] usb-storage: Status code 0; transferred 4096/4096
[ 290.124764] usb-storage: -- transfer complete
[ 290.124769] usb-storage: Bulk data transfer result 0x0
[ 290.124772] usb-storage: Attempting to get CSW...
[ 290.124778] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 290.125745] usb-storage: Status code 0; transferred 13/13
[ 290.125750] usb-storage: -- transfer complete
[ 290.125754] usb-storage: Bulk status result = 0
[ 290.125760] usb-storage: Bulk Status S 0x53425355 T 0x7e5 R 0 Stat 0x0
[ 290.125766] usb-storage: scsi cmd done, result=0x0
[ 290.125773] usb-storage: *** thread sleeping.
[ 295.010045] usb-storage: queuecommand called
[ 295.010078] usb-storage: *** thread awakened.
[ 295.010087] usb-storage: Command WRITE_10 (10 bytes)
[ 295.010091] usb-storage: 2a 00 00 b8 ba a7 00 00 60 00
[ 295.010111] usb-storage: Bulk Command S 0x43425355 T 0x7e6 L 49152 F 0 Trg 0 LUN 0 CL 10
[ 295.010118] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 295.011735] usb-storage: Status code 0; transferred 31/31
[ 295.011740] usb-storage: -- transfer complete
[ 295.011744] usb-storage: Bulk command transfer result=0
[ 295.011750] usb-storage: usb_stor_bulk_transfer_sglist: xfer 49152 bytes, 12 entries
[ 295.187765] usb-storage: Status code 0; transferred 49152/49152
[ 295.187770] usb-storage: -- transfer complete
[ 295.187775] usb-storage: Bulk data transfer result 0x0
[ 295.187779] usb-storage: Attempting to get CSW...
[ 295.187784] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 295.212739] usb-storage: Status code 0; transferred 13/13
[ 295.212744] usb-storage: -- transfer complete
[ 295.212748] usb-storage: Bulk status result = 0
[ 295.212754] usb-storage: Bulk Status S 0x53425355 T 0x7e6 R 0 Stat 0x0
[ 295.212759] usb-storage: scsi cmd done, result=0x0
[ 295.212767] usb-storage: *** thread sleeping.
[ 295.212817] usb-storage: queuecommand called
[ 295.212833] usb-storage: *** thread awakened.
[ 295.212838] usb-storage: Command WRITE_10 (10 bytes)
[ 295.212842] usb-storage: 2a 00 00 b8 e8 0f 00 00 60 00
[ 295.212861] usb-storage: Bulk Command S 0x43425355 T 0x7e7 L 49152 F 0 Trg 0 LUN 0 CL 10
[ 295.212867] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 295.213737] usb-storage: Status code 0; transferred 31/31
[ 295.213742] usb-storage: -- transfer complete
[ 295.213746] usb-storage: Bulk command transfer result=0
[ 295.213752] usb-storage: usb_stor_bulk_transfer_sglist: xfer 49152 bytes, 12 entries
[ 295.316764] usb-storage: Status code 0; transferred 49152/49152
[ 295.316769] usb-storage: -- transfer complete
[ 295.316774] usb-storage: Bulk data transfer result 0x0
[ 295.316777] usb-storage: Attempting to get CSW...
[ 295.316782] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 295.317735] usb-storage: Status code 0; transferred 13/13
[ 295.317739] usb-storage: -- transfer complete
[ 295.317743] usb-storage: Bulk status result = 0
[ 295.317749] usb-storage: Bulk Status S 0x53425355 T 0x7e7 R 0 Stat 0x0
[ 295.317754] usb-storage: scsi cmd done, result=0x0
[ 295.317761] usb-storage: *** thread sleeping.
[ 295.317803] usb-storage: queuecommand called
[ 295.317813] usb-storage: *** thread awakened.
[ 295.317818] usb-storage: Command WRITE_10 (10 bytes)
[ 295.317822] usb-storage: 2a 00 00 74 1d c7 00 00 48 00
[ 295.317841] usb-storage: Bulk Command S 0x43425355 T 0x7e8 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 295.317847] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 295.318730] usb-storage: Status code 0; transferred 31/31
[ 295.318734] usb-storage: -- transfer complete
[ 295.318738] usb-storage: Bulk command transfer result=0
[ 295.318744] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 295.632766] usb-storage: Status code 0; transferred 36864/36864
[ 295.632770] usb-storage: -- transfer complete
[ 295.632775] usb-storage: Bulk data transfer result 0x0
[ 295.632779] usb-storage: Attempting to get CSW...
[ 295.632783] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 295.657749] usb-storage: Status code 0; transferred 13/13
[ 295.657753] usb-storage: -- transfer complete
[ 295.657757] usb-storage: Bulk status result = 0
[ 295.657763] usb-storage: Bulk Status S 0x53425355 T 0x7e8 R 0 Stat 0x0
[ 295.657768] usb-storage: scsi cmd done, result=0x0
[ 295.657774] usb-storage: *** thread sleeping.
[ 295.657854] usb-storage: queuecommand called
[ 295.657866] usb-storage: *** thread awakened.
[ 295.657871] usb-storage: Command WRITE_10 (10 bytes)
[ 295.657875] usb-storage: 2a 00 00 74 1e 0f 00 00 08 00
[ 295.657893] usb-storage: Bulk Command S 0x43425355 T 0x7e9 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 295.657899] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 295.658744] usb-storage: Status code 0; transferred 31/31
[ 295.658748] usb-storage: -- transfer complete
[ 295.658752] usb-storage: Bulk command transfer result=0
[ 295.658758] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 295.664762] usb-storage: Status code 0; transferred 4096/4096
[ 295.664767] usb-storage: -- transfer complete
[ 295.664771] usb-storage: Bulk data transfer result 0x0
[ 295.664775] usb-storage: Attempting to get CSW...
[ 295.664780] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 295.666740] usb-storage: Status code 0; transferred 13/13
[ 295.666745] usb-storage: -- transfer complete
[ 295.666749] usb-storage: Bulk status result = 0
[ 295.666755] usb-storage: Bulk Status S 0x53425355 T 0x7e9 R 0 Stat 0x0
[ 295.666761] usb-storage: scsi cmd done, result=0x0
[ 295.666768] usb-storage: *** thread sleeping.
[ 300.040149] usb-storage: queuecommand called
[ 300.040163] usb-storage: *** thread awakened.
[ 300.040169] usb-storage: Command WRITE_10 (10 bytes)
[ 300.040173] usb-storage: 2a 00 00 74 1e 17 00 00 48 00
[ 300.040192] usb-storage: Bulk Command S 0x43425355 T 0x7ea L 36864 F 0 Trg 0 LUN 0 CL 10
[ 300.040199] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 300.041733] usb-storage: Status code 0; transferred 31/31
[ 300.041737] usb-storage: -- transfer complete
[ 300.041741] usb-storage: Bulk command transfer result=0
[ 300.041747] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 300.166766] usb-storage: Status code 0; transferred 36864/36864
[ 300.166771] usb-storage: -- transfer complete
[ 300.166776] usb-storage: Bulk data transfer result 0x0
[ 300.166780] usb-storage: Attempting to get CSW...
[ 300.166785] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 300.170737] usb-storage: Status code 0; transferred 13/13
[ 300.170742] usb-storage: -- transfer complete
[ 300.170747] usb-storage: Bulk status result = 0
[ 300.170753] usb-storage: Bulk Status S 0x53425355 T 0x7ea R 0 Stat 0x0
[ 300.170758] usb-storage: scsi cmd done, result=0x0
[ 300.170766] usb-storage: *** thread sleeping.
[ 300.170862] usb-storage: queuecommand called
[ 300.170891] usb-storage: *** thread awakened.
[ 300.170898] usb-storage: Command WRITE_10 (10 bytes)
[ 300.170901] usb-storage: 2a 00 00 74 1e 5f 00 00 08 00
[ 300.170920] usb-storage: Bulk Command S 0x43425355 T 0x7eb L 4096 F 0 Trg 0 LUN 0 CL 10
[ 300.170926] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 300.171734] usb-storage: Status code 0; transferred 31/31
[ 300.171738] usb-storage: -- transfer complete
[ 300.171742] usb-storage: Bulk command transfer result=0
[ 300.171747] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 300.177766] usb-storage: Status code 0; transferred 4096/4096
[ 300.177770] usb-storage: -- transfer complete
[ 300.177775] usb-storage: Bulk data transfer result 0x0
[ 300.177778] usb-storage: Attempting to get CSW...
[ 300.177783] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 300.178730] usb-storage: Status code 0; transferred 13/13
[ 300.178734] usb-storage: -- transfer complete
[ 300.178738] usb-storage: Bulk status result = 0
[ 300.178743] usb-storage: Bulk Status S 0x53425355 T 0x7eb R 0 Stat 0x0
[ 300.178748] usb-storage: scsi cmd done, result=0x0
[ 300.178755] usb-storage: *** thread sleeping.
[ 313.734641] usb-storage: queuecommand called
[ 313.734664] usb-storage: *** thread awakened.
[ 313.734670] usb-storage: Command READ_10 (10 bytes)
[ 313.734674] usb-storage: 28 00 00 c8 00 4f 00 00 08 00
[ 313.734695] usb-storage: Bulk Command S 0x43425355 T 0x7ec L 4096 F 128 Trg 0 LUN 0 CL 10
[ 313.734702] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 313.736741] usb-storage: Status code 0; transferred 31/31
[ 313.736747] usb-storage: -- transfer complete
[ 313.736752] usb-storage: Bulk command transfer result=0
[ 313.736758] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 313.749773] usb-storage: Status code 0; transferred 4096/4096
[ 313.749778] usb-storage: -- transfer complete
[ 313.749782] usb-storage: Bulk data transfer result 0x0
[ 313.749786] usb-storage: Attempting to get CSW...
[ 313.749791] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 313.750732] usb-storage: Status code 0; transferred 13/13
[ 313.750737] usb-storage: -- transfer complete
[ 313.750742] usb-storage: Bulk status result = 0
[ 313.750747] usb-storage: Bulk Status S 0x53425355 T 0x7ec R 0 Stat 0x0
[ 313.750753] usb-storage: scsi cmd done, result=0x0
[ 313.750760] usb-storage: *** thread sleeping.
[ 313.750791] usb-storage: queuecommand called
[ 313.750801] usb-storage: *** thread awakened.
[ 313.750807] usb-storage: Command WRITE_10 (10 bytes)
[ 313.750810] usb-storage: 2a 00 00 74 1e 67 00 00 50 00
[ 313.750829] usb-storage: Bulk Command S 0x43425355 T 0x7ed L 40960 F 0 Trg 0 LUN 0 CL 10
[ 313.750835] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 313.751755] usb-storage: Status code 0; transferred 31/31
[ 313.751761] usb-storage: -- transfer complete
[ 313.751766] usb-storage: Bulk command transfer result=0
[ 313.751772] usb-storage: usb_stor_bulk_transfer_sglist: xfer 40960 bytes, 10 entries
[ 313.908765] usb-storage: Status code 0; transferred 40960/40960
[ 313.908771] usb-storage: -- transfer complete
[ 313.908775] usb-storage: Bulk data transfer result 0x0
[ 313.908779] usb-storage: Attempting to get CSW...
[ 313.908784] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 313.913737] usb-storage: Status code 0; transferred 13/13
[ 313.913741] usb-storage: -- transfer complete
[ 313.913745] usb-storage: Bulk status result = 0
[ 313.913750] usb-storage: Bulk Status S 0x53425355 T 0x7ed R 0 Stat 0x0
[ 313.913756] usb-storage: scsi cmd done, result=0x0
[ 313.913764] usb-storage: *** thread sleeping.
[ 313.913868] usb-storage: queuecommand called
[ 313.913880] usb-storage: *** thread awakened.
[ 313.913885] usb-storage: Command WRITE_10 (10 bytes)
[ 313.913889] usb-storage: 2a 00 00 74 1e b7 00 00 08 00
[ 313.913908] usb-storage: Bulk Command S 0x43425355 T 0x7ee L 4096 F 0 Trg 0 LUN 0 CL 10
[ 313.913914] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 313.914742] usb-storage: Status code 0; transferred 31/31
[ 313.914746] usb-storage: -- transfer complete
[ 313.914751] usb-storage: Bulk command transfer result=0
[ 313.914757] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 313.920747] usb-storage: Status code 0; transferred 4096/4096
[ 313.920752] usb-storage: -- transfer complete
[ 313.920756] usb-storage: Bulk data transfer result 0x0
[ 313.920760] usb-storage: Attempting to get CSW...
[ 313.920765] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 313.921743] usb-storage: Status code 0; transferred 13/13
[ 313.921747] usb-storage: -- transfer complete
[ 313.921751] usb-storage: Bulk status result = 0
[ 313.921756] usb-storage: Bulk Status S 0x53425355 T 0x7ee R 0 Stat 0x0
[ 313.921761] usb-storage: scsi cmd done, result=0x0
[ 313.921769] usb-storage: *** thread sleeping.
[ 315.010040] usb-storage: queuecommand called
[ 315.010052] usb-storage: *** thread awakened.
[ 315.010057] usb-storage: Command WRITE_10 (10 bytes)
[ 315.010061] usb-storage: 2a 00 00 b8 ef 37 00 00 50 00
[ 315.010081] usb-storage: Bulk Command S 0x43425355 T 0x7ef L 40960 F 0 Trg 0 LUN 0 CL 10
[ 315.010087] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 315.011733] usb-storage: Status code 0; transferred 31/31
[ 315.011737] usb-storage: -- transfer complete
[ 315.011741] usb-storage: Bulk command transfer result=0
[ 315.011747] usb-storage: usb_stor_bulk_transfer_sglist: xfer 40960 bytes, 10 entries
[ 315.205765] usb-storage: Status code 0; transferred 40960/40960
[ 315.205771] usb-storage: -- transfer complete
[ 315.205775] usb-storage: Bulk data transfer result 0x0
[ 315.205779] usb-storage: Attempting to get CSW...
[ 315.205785] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 315.231743] usb-storage: Status code 0; transferred 13/13
[ 315.231747] usb-storage: -- transfer complete
[ 315.231752] usb-storage: Bulk status result = 0
[ 315.231757] usb-storage: Bulk Status S 0x53425355 T 0x7ef R 0 Stat 0x0
[ 315.231763] usb-storage: scsi cmd done, result=0x0
[ 315.231770] usb-storage: *** thread sleeping.
[ 319.012624] usb-storage: queuecommand called
[ 319.012636] usb-storage: *** thread awakened.
[ 319.012642] usb-storage: Command WRITE_10 (10 bytes)
[ 319.012646] usb-storage: 2a 00 00 74 1e bf 00 00 48 00
[ 319.012665] usb-storage: Bulk Command S 0x43425355 T 0x7f0 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 319.012671] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 319.013735] usb-storage: Status code 0; transferred 31/31
[ 319.013739] usb-storage: -- transfer complete
[ 319.013743] usb-storage: Bulk command transfer result=0
[ 319.013749] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 319.175767] usb-storage: Status code 0; transferred 36864/36864
[ 319.175772] usb-storage: -- transfer complete
[ 319.175777] usb-storage: Bulk data transfer result 0x0
[ 319.175781] usb-storage: Attempting to get CSW...
[ 319.175786] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 319.199741] usb-storage: Status code 0; transferred 13/13
[ 319.199745] usb-storage: -- transfer complete
[ 319.199749] usb-storage: Bulk status result = 0
[ 319.199755] usb-storage: Bulk Status S 0x53425355 T 0x7f0 R 0 Stat 0x0
[ 319.199760] usb-storage: scsi cmd done, result=0x0
[ 319.199767] usb-storage: *** thread sleeping.
[ 319.199847] usb-storage: queuecommand called
[ 319.199858] usb-storage: *** thread awakened.
[ 319.199864] usb-storage: Command WRITE_10 (10 bytes)
[ 319.199867] usb-storage: 2a 00 00 74 1f 07 00 00 08 00
[ 319.199886] usb-storage: Bulk Command S 0x43425355 T 0x7f1 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 319.199892] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 319.200747] usb-storage: Status code 0; transferred 31/31
[ 319.200752] usb-storage: -- transfer complete
[ 319.200757] usb-storage: Bulk command transfer result=0
[ 319.200763] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 319.207767] usb-storage: Status code 0; transferred 4096/4096
[ 319.207772] usb-storage: -- transfer complete
[ 319.207777] usb-storage: Bulk data transfer result 0x0
[ 319.207780] usb-storage: Attempting to get CSW...
[ 319.207786] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 319.209745] usb-storage: Status code 0; transferred 13/13
[ 319.209749] usb-storage: -- transfer complete
[ 319.209753] usb-storage: Bulk status result = 0
[ 319.209759] usb-storage: Bulk Status S 0x53425355 T 0x7f1 R 0 Stat 0x0
[ 319.209764] usb-storage: scsi cmd done, result=0x0
[ 319.209771] usb-storage: *** thread sleeping.
[ 325.010044] usb-storage: queuecommand called
[ 325.010058] usb-storage: *** thread awakened.
[ 325.010064] usb-storage: Command WRITE_10 (10 bytes)
[ 325.010068] usb-storage: 2a 00 00 c4 0f 67 00 00 08 00
[ 325.010088] usb-storage: Bulk Command S 0x43425355 T 0x7f2 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 325.010095] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 325.011739] usb-storage: Status code 0; transferred 31/31
[ 325.011744] usb-storage: -- transfer complete
[ 325.011748] usb-storage: Bulk command transfer result=0
[ 325.011754] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 325.025767] usb-storage: Status code 0; transferred 4096/4096
[ 325.025772] usb-storage: -- transfer complete
[ 325.025776] usb-storage: Bulk data transfer result 0x0
[ 325.025780] usb-storage: Attempting to get CSW...
[ 325.025785] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 325.050743] usb-storage: Status code 0; transferred 13/13
[ 325.050749] usb-storage: -- transfer complete
[ 325.050753] usb-storage: Bulk status result = 0
[ 325.050759] usb-storage: Bulk Status S 0x53425355 T 0x7f2 R 0 Stat 0x0
[ 325.050765] usb-storage: scsi cmd done, result=0x0
[ 325.050772] usb-storage: *** thread sleeping.
[ 325.050802] usb-storage: queuecommand called
[ 325.050812] usb-storage: *** thread awakened.
[ 325.050818] usb-storage: Command WRITE_10 (10 bytes)
[ 325.050822] usb-storage: 2a 00 00 74 1f 0f 00 00 48 00
[ 325.050841] usb-storage: Bulk Command S 0x43425355 T 0x7f3 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 325.050847] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 325.051750] usb-storage: Status code 0; transferred 31/31
[ 325.051755] usb-storage: -- transfer complete
[ 325.051759] usb-storage: Bulk command transfer result=0
[ 325.051764] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 325.415770] usb-storage: Status code 0; transferred 36864/36864
[ 325.415774] usb-storage: -- transfer complete
[ 325.415779] usb-storage: Bulk data transfer result 0x0
[ 325.415783] usb-storage: Attempting to get CSW...
[ 325.415788] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 325.417748] usb-storage: Status code 0; transferred 13/13
[ 325.417752] usb-storage: -- transfer complete
[ 325.417756] usb-storage: Bulk status result = 0
[ 325.417761] usb-storage: Bulk Status S 0x53425355 T 0x7f3 R 0 Stat 0x0
[ 325.417766] usb-storage: scsi cmd done, result=0x0
[ 325.417773] usb-storage: *** thread sleeping.
[ 325.417854] usb-storage: queuecommand called
[ 325.417865] usb-storage: *** thread awakened.
[ 325.417871] usb-storage: Command WRITE_10 (10 bytes)
[ 325.417874] usb-storage: 2a 00 00 74 1f 57 00 00 08 00
[ 325.417893] usb-storage: Bulk Command S 0x43425355 T 0x7f4 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 325.417899] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 325.418827] usb-storage: Status code 0; transferred 31/31
[ 325.418832] usb-storage: -- transfer complete
[ 325.418836] usb-storage: Bulk command transfer result=0
[ 325.418842] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 325.424763] usb-storage: Status code 0; transferred 4096/4096
[ 325.424768] usb-storage: -- transfer complete
[ 325.424773] usb-storage: Bulk data transfer result 0x0
[ 325.424777] usb-storage: Attempting to get CSW...
[ 325.424782] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 325.425728] usb-storage: Status code 0; transferred 13/13
[ 325.425732] usb-storage: -- transfer complete
[ 325.425736] usb-storage: Bulk status result = 0
[ 325.425742] usb-storage: Bulk Status S 0x53425355 T 0x7f4 R 0 Stat 0x0
[ 325.425747] usb-storage: scsi cmd done, result=0x0
[ 325.425753] usb-storage: *** thread sleeping.
[ 330.012557] usb-storage: queuecommand called
[ 330.012591] usb-storage: *** thread awakened.
[ 330.012599] usb-storage: Command WRITE_10 (10 bytes)
[ 330.012603] usb-storage: 2a 00 00 b8 ba ff 00 00 40 00
[ 330.012623] usb-storage: Bulk Command S 0x43425355 T 0x7f5 L 32768 F 0 Trg 0 LUN 0 CL 10
[ 330.012629] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 330.013736] usb-storage: Status code 0; transferred 31/31
[ 330.013740] usb-storage: -- transfer complete
[ 330.013744] usb-storage: Bulk command transfer result=0
[ 330.013750] usb-storage: usb_stor_bulk_transfer_sglist: xfer 32768 bytes, 8 entries
[ 330.189764] usb-storage: Status code 0; transferred 32768/32768
[ 330.189769] usb-storage: -- transfer complete
[ 330.189774] usb-storage: Bulk data transfer result 0x0
[ 330.189779] usb-storage: Attempting to get CSW...
[ 330.189784] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 330.214743] usb-storage: Status code 0; transferred 13/13
[ 330.214747] usb-storage: -- transfer complete
[ 330.214751] usb-storage: Bulk status result = 0
[ 330.214757] usb-storage: Bulk Status S 0x53425355 T 0x7f5 R 0 Stat 0x0
[ 330.214763] usb-storage: scsi cmd done, result=0x0
[ 330.214770] usb-storage: *** thread sleeping.
[ 330.214812] usb-storage: queuecommand called
[ 330.214829] usb-storage: *** thread awakened.
[ 330.214835] usb-storage: Command WRITE_10 (10 bytes)
[ 330.214838] usb-storage: 2a 00 00 b8 e8 67 00 00 40 00
[ 330.214857] usb-storage: Bulk Command S 0x43425355 T 0x7f6 L 32768 F 0 Trg 0 LUN 0 CL 10
[ 330.214864] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 330.215754] usb-storage: Status code 0; transferred 31/31
[ 330.215759] usb-storage: -- transfer complete
[ 330.215763] usb-storage: Bulk command transfer result=0
[ 330.215769] usb-storage: usb_stor_bulk_transfer_sglist: xfer 32768 bytes, 8 entries
[ 330.308766] usb-storage: Status code 0; transferred 32768/32768
[ 330.308771] usb-storage: -- transfer complete
[ 330.308775] usb-storage: Bulk data transfer result 0x0
[ 330.308778] usb-storage: Attempting to get CSW...
[ 330.308783] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 330.310732] usb-storage: Status code 0; transferred 13/13
[ 330.310737] usb-storage: -- transfer complete
[ 330.310741] usb-storage: Bulk status result = 0
[ 330.310746] usb-storage: Bulk Status S 0x53425355 T 0x7f6 R 0 Stat 0x0
[ 330.310751] usb-storage: scsi cmd done, result=0x0
[ 330.310758] usb-storage: *** thread sleeping.
[ 330.310793] usb-storage: queuecommand called
[ 330.310803] usb-storage: *** thread awakened.
[ 330.310808] usb-storage: Command WRITE_10 (10 bytes)
[ 330.310812] usb-storage: 2a 00 00 74 1f 5f 00 00 48 00
[ 330.310830] usb-storage: Bulk Command S 0x43425355 T 0x7f7 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 330.310836] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 330.311756] usb-storage: Status code 0; transferred 31/31
[ 330.311760] usb-storage: -- transfer complete
[ 330.311764] usb-storage: Bulk command transfer result=0
[ 330.311770] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 330.682767] usb-storage: Status code 0; transferred 36864/36864
[ 330.682772] usb-storage: -- transfer complete
[ 330.682776] usb-storage: Bulk data transfer result 0x0
[ 330.682780] usb-storage: Attempting to get CSW...
[ 330.682785] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 330.708741] usb-storage: Status code 0; transferred 13/13
[ 330.708746] usb-storage: -- transfer complete
[ 330.708750] usb-storage: Bulk status result = 0
[ 330.708755] usb-storage: Bulk Status S 0x53425355 T 0x7f7 R 0 Stat 0x0
[ 330.708760] usb-storage: scsi cmd done, result=0x0
[ 330.708766] usb-storage: *** thread sleeping.
[ 330.708843] usb-storage: queuecommand called
[ 330.708854] usb-storage: *** thread awakened.
[ 330.708859] usb-storage: Command WRITE_10 (10 bytes)
[ 330.708863] usb-storage: 2a 00 00 74 1f a7 00 00 08 00
[ 330.708881] usb-storage: Bulk Command S 0x43425355 T 0x7f8 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 330.708887] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 330.709751] usb-storage: Status code 0; transferred 31/31
[ 330.709755] usb-storage: -- transfer complete
[ 330.709759] usb-storage: Bulk command transfer result=0
[ 330.709765] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 330.716765] usb-storage: Status code 0; transferred 4096/4096
[ 330.716770] usb-storage: -- transfer complete
[ 330.716774] usb-storage: Bulk data transfer result 0x0
[ 330.716778] usb-storage: Attempting to get CSW...
[ 330.716783] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 330.718741] usb-storage: Status code 0; transferred 13/13
[ 330.718745] usb-storage: -- transfer complete
[ 330.718749] usb-storage: Bulk status result = 0
[ 330.718754] usb-storage: Bulk Status S 0x53425355 T 0x7f8 R 0 Stat 0x0
[ 330.718760] usb-storage: scsi cmd done, result=0x0
[ 330.718766] usb-storage: *** thread sleeping.
[ 335.040132] usb-storage: queuecommand called
[ 335.040144] usb-storage: *** thread awakened.
[ 335.040149] usb-storage: Command WRITE_10 (10 bytes)
[ 335.040153] usb-storage: 2a 00 00 74 1f af 00 00 48 00
[ 335.040172] usb-storage: Bulk Command S 0x43425355 T 0x7f9 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 335.040178] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 335.041736] usb-storage: Status code 0; transferred 31/31
[ 335.041740] usb-storage: -- transfer complete
[ 335.041744] usb-storage: Bulk command transfer result=0
[ 335.041750] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 335.238767] usb-storage: Status code 0; transferred 36864/36864
[ 335.238773] usb-storage: -- transfer complete
[ 335.238778] usb-storage: Bulk data transfer result 0x0
[ 335.238782] usb-storage: Attempting to get CSW...
[ 335.238787] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 335.243740] usb-storage: Status code 0; transferred 13/13
[ 335.243745] usb-storage: -- transfer complete
[ 335.243749] usb-storage: Bulk status result = 0
[ 335.243755] usb-storage: Bulk Status S 0x53425355 T 0x7f9 R 0 Stat 0x0
[ 335.243760] usb-storage: scsi cmd done, result=0x0
[ 335.243767] usb-storage: *** thread sleeping.
[ 335.243863] usb-storage: queuecommand called
[ 335.243884] usb-storage: *** thread awakened.
[ 335.243890] usb-storage: Command WRITE_10 (10 bytes)
[ 335.243894] usb-storage: 2a 00 00 74 1f f7 00 00 08 00
[ 335.243913] usb-storage: Bulk Command S 0x43425355 T 0x7fa L 4096 F 0 Trg 0 LUN 0 CL 10
[ 335.243919] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 335.244755] usb-storage: Status code 0; transferred 31/31
[ 335.244759] usb-storage: -- transfer complete
[ 335.244764] usb-storage: Bulk command transfer result=0
[ 335.244770] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 335.251766] usb-storage: Status code 0; transferred 4096/4096
[ 335.251771] usb-storage: -- transfer complete
[ 335.251775] usb-storage: Bulk data transfer result 0x0
[ 335.251779] usb-storage: Attempting to get CSW...
[ 335.251784] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 335.253729] usb-storage: Status code 0; transferred 13/13
[ 335.253734] usb-storage: -- transfer complete
[ 335.253738] usb-storage: Bulk status result = 0
[ 335.253743] usb-storage: Bulk Status S 0x53425355 T 0x7fa R 0 Stat 0x0
[ 335.253748] usb-storage: scsi cmd done, result=0x0
[ 335.253755] usb-storage: *** thread sleeping.
[ 340.040140] usb-storage: queuecommand called
[ 340.040177] usb-storage: *** thread awakened.
[ 340.040185] usb-storage: Command WRITE_10 (10 bytes)
[ 340.040189] usb-storage: 2a 00 00 74 1f ff 00 00 48 00
[ 340.040209] usb-storage: Bulk Command S 0x43425355 T 0x7fb L 36864 F 0 Trg 0 LUN 0 CL 10
[ 340.040215] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 340.041737] usb-storage: Status code 0; transferred 31/31
[ 340.041741] usb-storage: -- transfer complete
[ 340.041745] usb-storage: Bulk command transfer result=0
[ 340.041751] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 340.258788] usb-storage: Status code 0; transferred 36864/36864
[ 340.258793] usb-storage: -- transfer complete
[ 340.258797] usb-storage: Bulk data transfer result 0x0
[ 340.258801] usb-storage: Attempting to get CSW...
[ 340.258806] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 340.262741] usb-storage: Status code 0; transferred 13/13
[ 340.262746] usb-storage: -- transfer complete
[ 340.262751] usb-storage: Bulk status result = 0
[ 340.262756] usb-storage: Bulk Status S 0x53425355 T 0x7fb R 0 Stat 0x0
[ 340.262761] usb-storage: scsi cmd done, result=0x0
[ 340.262768] usb-storage: *** thread sleeping.
[ 340.262869] usb-storage: queuecommand called
[ 340.262897] usb-storage: *** thread awakened.
[ 340.262903] usb-storage: Command WRITE_10 (10 bytes)
[ 340.262907] usb-storage: 2a 00 00 74 20 47 00 00 08 00
[ 340.262925] usb-storage: Bulk Command S 0x43425355 T 0x7fc L 4096 F 0 Trg 0 LUN 0 CL 10
[ 340.262931] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 340.263754] usb-storage: Status code 0; transferred 31/31
[ 340.263758] usb-storage: -- transfer complete
[ 340.263763] usb-storage: Bulk command transfer result=0
[ 340.263769] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 340.270770] usb-storage: Status code 0; transferred 4096/4096
[ 340.270775] usb-storage: -- transfer complete
[ 340.270779] usb-storage: Bulk data transfer result 0x0
[ 340.270783] usb-storage: Attempting to get CSW...
[ 340.270788] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 340.272747] usb-storage: Status code 0; transferred 13/13
[ 340.272752] usb-storage: -- transfer complete
[ 340.272757] usb-storage: Bulk status result = 0
[ 340.272762] usb-storage: Bulk Status S 0x53425355 T 0x7fc R 0 Stat 0x0
[ 340.272768] usb-storage: scsi cmd done, result=0x0
[ 340.272775] usb-storage: *** thread sleeping.
[ 345.040197] usb-storage: queuecommand called
[ 345.040213] usb-storage: *** thread awakened.
[ 345.040219] usb-storage: Command WRITE_10 (10 bytes)
[ 345.040223] usb-storage: 2a 00 00 74 20 4f 00 00 48 00
[ 345.040244] usb-storage: Bulk Command S 0x43425355 T 0x7fd L 36864 F 0 Trg 0 LUN 0 CL 10
[ 345.040250] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 345.041744] usb-storage: Status code 0; transferred 31/31
[ 345.041749] usb-storage: -- transfer complete
[ 345.041754] usb-storage: Bulk command transfer result=0
[ 345.041761] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 345.089787] usb-storage: Status code 0; transferred 36864/36864
[ 345.089792] usb-storage: -- transfer complete
[ 345.089796] usb-storage: Bulk data transfer result 0x0
[ 345.089800] usb-storage: Attempting to get CSW...
[ 345.089805] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 345.093756] usb-storage: Status code 0; transferred 13/13
[ 345.093760] usb-storage: -- transfer complete
[ 345.093765] usb-storage: Bulk status result = 0
[ 345.093770] usb-storage: Bulk Status S 0x53425355 T 0x7fd R 0 Stat 0x0
[ 345.093776] usb-storage: scsi cmd done, result=0x0
[ 345.093784] usb-storage: *** thread sleeping.
[ 345.093867] usb-storage: queuecommand called
[ 345.093878] usb-storage: *** thread awakened.
[ 345.093883] usb-storage: Command WRITE_10 (10 bytes)
[ 345.093887] usb-storage: 2a 00 00 74 20 97 00 00 08 00
[ 345.093906] usb-storage: Bulk Command S 0x43425355 T 0x7fe L 4096 F 0 Trg 0 LUN 0 CL 10
[ 345.093912] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 345.094753] usb-storage: Status code 0; transferred 31/31
[ 345.094758] usb-storage: -- transfer complete
[ 345.094762] usb-storage: Bulk command transfer result=0
[ 345.094768] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 345.100760] usb-storage: Status code 0; transferred 4096/4096
[ 345.100764] usb-storage: -- transfer complete
[ 345.100768] usb-storage: Bulk data transfer result 0x0
[ 345.100772] usb-storage: Attempting to get CSW...
[ 345.100777] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 345.101737] usb-storage: Status code 0; transferred 13/13
[ 345.101741] usb-storage: -- transfer complete
[ 345.101745] usb-storage: Bulk status result = 0
[ 345.101751] usb-storage: Bulk Status S 0x53425355 T 0x7fe R 0 Stat 0x0
[ 345.101756] usb-storage: scsi cmd done, result=0x0
[ 345.101763] usb-storage: *** thread sleeping.
[ 350.020042] usb-storage: queuecommand called
[ 350.020074] usb-storage: *** thread awakened.
[ 350.020081] usb-storage: Command WRITE_10 (10 bytes)
[ 350.020085] usb-storage: 2a 00 00 b8 ef 7f 00 00 40 00
[ 350.020105] usb-storage: Bulk Command S 0x43425355 T 0x7ff L 32768 F 0 Trg 0 LUN 0 CL 10
[ 350.020111] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 350.021754] usb-storage: Status code 0; transferred 31/31
[ 350.021759] usb-storage: -- transfer complete
[ 350.021763] usb-storage: Bulk command transfer result=0
[ 350.021768] usb-storage: usb_stor_bulk_transfer_sglist: xfer 32768 bytes, 8 entries
[ 350.219770] usb-storage: Status code 0; transferred 32768/32768
[ 350.219776] usb-storage: -- transfer complete
[ 350.219780] usb-storage: Bulk data transfer result 0x0
[ 350.219784] usb-storage: Attempting to get CSW...
[ 350.219789] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 350.244749] usb-storage: Status code 0; transferred 13/13
[ 350.244754] usb-storage: -- transfer complete
[ 350.244758] usb-storage: Bulk status result = 0
[ 350.244764] usb-storage: Bulk Status S 0x53425355 T 0x7ff R 0 Stat 0x0
[ 350.244769] usb-storage: scsi cmd done, result=0x0
[ 350.244777] usb-storage: *** thread sleeping.
[ 350.244814] usb-storage: queuecommand called
[ 350.244825] usb-storage: *** thread awakened.
[ 350.244830] usb-storage: Command WRITE_10 (10 bytes)
[ 350.244834] usb-storage: 2a 00 00 74 20 9f 00 00 48 00
[ 350.244853] usb-storage: Bulk Command S 0x43425355 T 0x800 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 350.244859] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 350.245756] usb-storage: Status code 0; transferred 31/31
[ 350.245761] usb-storage: -- transfer complete
[ 350.245765] usb-storage: Bulk command transfer result=0
[ 350.245770] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 350.355772] usb-storage: Status code 0; transferred 36864/36864
[ 350.355777] usb-storage: -- transfer complete
[ 350.355781] usb-storage: Bulk data transfer result 0x0
[ 350.355785] usb-storage: Attempting to get CSW...
[ 350.355790] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 350.380756] usb-storage: Status code 0; transferred 13/13
[ 350.380760] usb-storage: -- transfer complete
[ 350.380764] usb-storage: Bulk status result = 0
[ 350.380770] usb-storage: Bulk Status S 0x53425355 T 0x800 R 0 Stat 0x0
[ 350.380775] usb-storage: scsi cmd done, result=0x0
[ 350.380781] usb-storage: *** thread sleeping.
[ 350.380857] usb-storage: queuecommand called
[ 350.380868] usb-storage: *** thread awakened.
[ 350.380873] usb-storage: Command WRITE_10 (10 bytes)
[ 350.380877] usb-storage: 2a 00 00 74 20 e7 00 00 08 00
[ 350.380895] usb-storage: Bulk Command S 0x43425355 T 0x801 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 350.380901] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 350.381752] usb-storage: Status code 0; transferred 31/31
[ 350.381757] usb-storage: -- transfer complete
[ 350.381761] usb-storage: Bulk command transfer result=0
[ 350.381766] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 350.388776] usb-storage: Status code 0; transferred 4096/4096
[ 350.388781] usb-storage: -- transfer complete
[ 350.388785] usb-storage: Bulk data transfer result 0x0
[ 350.388789] usb-storage: Attempting to get CSW...
[ 350.388794] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 350.390736] usb-storage: Status code 0; transferred 13/13
[ 350.390740] usb-storage: -- transfer complete
[ 350.390744] usb-storage: Bulk status result = 0
[ 350.390750] usb-storage: Bulk Status S 0x53425355 T 0x801 R 0 Stat 0x0
[ 350.390755] usb-storage: scsi cmd done, result=0x0
[ 350.390762] usb-storage: *** thread sleeping.
[ 361.749628] usb-storage: queuecommand called
[ 361.749646] usb-storage: *** thread awakened.
[ 361.749653] usb-storage: Command WRITE_10 (10 bytes)
[ 361.749657] usb-storage: 2a 00 00 74 20 ef 00 00 68 00
[ 361.749677] usb-storage: Bulk Command S 0x43425355 T 0x802 L 53248 F 0 Trg 0 LUN 0 CL 10
[ 361.749684] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 361.750768] usb-storage: Status code 0; transferred 31/31
[ 361.750773] usb-storage: -- transfer complete
[ 361.750777] usb-storage: Bulk command transfer result=0
[ 361.750784] usb-storage: usb_stor_bulk_transfer_sglist: xfer 53248 bytes, 13 entries
[ 361.841777] usb-storage: Status code 0; transferred 53248/53248
[ 361.841783] usb-storage: -- transfer complete
[ 361.841788] usb-storage: Bulk data transfer result 0x0
[ 361.841792] usb-storage: Attempting to get CSW...
[ 361.841797] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 361.846744] usb-storage: Status code 0; transferred 13/13
[ 361.846749] usb-storage: -- transfer complete
[ 361.846753] usb-storage: Bulk status result = 0
[ 361.846759] usb-storage: Bulk Status S 0x53425355 T 0x802 R 0 Stat 0x0
[ 361.846765] usb-storage: scsi cmd done, result=0x0
[ 361.846772] usb-storage: *** thread sleeping.
[ 361.846895] usb-storage: queuecommand called
[ 361.846907] usb-storage: *** thread awakened.
[ 361.846913] usb-storage: Command WRITE_10 (10 bytes)
[ 361.846917] usb-storage: 2a 00 00 74 21 57 00 00 08 00
[ 361.846936] usb-storage: Bulk Command S 0x43425355 T 0x803 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 361.846942] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 361.847765] usb-storage: Status code 0; transferred 31/31
[ 361.847771] usb-storage: -- transfer complete
[ 361.847776] usb-storage: Bulk command transfer result=0
[ 361.847783] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 361.853776] usb-storage: Status code 0; transferred 4096/4096
[ 361.853781] usb-storage: -- transfer complete
[ 361.853785] usb-storage: Bulk data transfer result 0x0
[ 361.853789] usb-storage: Attempting to get CSW...
[ 361.853794] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 361.854756] usb-storage: Status code 0; transferred 13/13
[ 361.854760] usb-storage: -- transfer complete
[ 361.854764] usb-storage: Bulk status result = 0
[ 361.854769] usb-storage: Bulk Status S 0x53425355 T 0x803 R 0 Stat 0x0
[ 361.854774] usb-storage: scsi cmd done, result=0x0
[ 361.854783] usb-storage: *** thread sleeping.
[ 365.010047] usb-storage: queuecommand called
[ 365.010079] usb-storage: *** thread awakened.
[ 365.010087] usb-storage: Command WRITE_10 (10 bytes)
[ 365.010091] usb-storage: 2a 00 00 b8 bb 37 00 00 40 00
[ 365.010111] usb-storage: Bulk Command S 0x43425355 T 0x804 L 32768 F 0 Trg 0 LUN 0 CL 10
[ 365.010117] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 365.011755] usb-storage: Status code 0; transferred 31/31
[ 365.011760] usb-storage: -- transfer complete
[ 365.011764] usb-storage: Bulk command transfer result=0
[ 365.011770] usb-storage: usb_stor_bulk_transfer_sglist: xfer 32768 bytes, 8 entries
[ 365.198773] usb-storage: Status code 0; transferred 32768/32768
[ 365.198778] usb-storage: -- transfer complete
[ 365.198783] usb-storage: Bulk data transfer result 0x0
[ 365.198787] usb-storage: Attempting to get CSW...
[ 365.198792] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 365.224749] usb-storage: Status code 0; transferred 13/13
[ 365.224754] usb-storage: -- transfer complete
[ 365.224758] usb-storage: Bulk status result = 0
[ 365.224764] usb-storage: Bulk Status S 0x53425355 T 0x804 R 0 Stat 0x0
[ 365.224769] usb-storage: scsi cmd done, result=0x0
[ 365.224776] usb-storage: *** thread sleeping.
[ 365.224816] usb-storage: queuecommand called
[ 365.224827] usb-storage: *** thread awakened.
[ 365.224833] usb-storage: Command WRITE_10 (10 bytes)
[ 365.224837] usb-storage: 2a 00 00 b8 e8 9f 00 00 40 00
[ 365.224855] usb-storage: Bulk Command S 0x43425355 T 0x805 L 32768 F 0 Trg 0 LUN 0 CL 10
[ 365.224861] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 365.225756] usb-storage: Status code 0; transferred 31/31
[ 365.225760] usb-storage: -- transfer complete
[ 365.225764] usb-storage: Bulk command transfer result=0
[ 365.225770] usb-storage: usb_stor_bulk_transfer_sglist: xfer 32768 bytes, 8 entries
[ 365.316770] usb-storage: Status code 0; transferred 32768/32768
[ 365.316775] usb-storage: -- transfer complete
[ 365.316779] usb-storage: Bulk data transfer result 0x0
[ 365.316783] usb-storage: Attempting to get CSW...
[ 365.316789] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 365.318737] usb-storage: Status code 0; transferred 13/13
[ 365.318741] usb-storage: -- transfer complete
[ 365.318745] usb-storage: Bulk status result = 0
[ 365.318750] usb-storage: Bulk Status S 0x53425355 T 0x805 R 0 Stat 0x0
[ 365.318756] usb-storage: scsi cmd done, result=0x0
[ 365.318762] usb-storage: *** thread sleeping.
[ 367.040167] usb-storage: queuecommand called
[ 367.040180] usb-storage: *** thread awakened.
[ 367.040186] usb-storage: Command WRITE_10 (10 bytes)
[ 367.040190] usb-storage: 2a 00 00 74 21 5f 00 00 58 00
[ 367.040209] usb-storage: Bulk Command S 0x43425355 T 0x806 L 45056 F 0 Trg 0 LUN 0 CL 10
[ 367.040215] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 367.041748] usb-storage: Status code 0; transferred 31/31
[ 367.041753] usb-storage: -- transfer complete
[ 367.041757] usb-storage: Bulk command transfer result=0
[ 367.041763] usb-storage: usb_stor_bulk_transfer_sglist: xfer 45056 bytes, 11 entries
[ 367.152778] usb-storage: Status code 0; transferred 45056/45056
[ 367.152783] usb-storage: -- transfer complete
[ 367.152788] usb-storage: Bulk data transfer result 0x0
[ 367.152791] usb-storage: Attempting to get CSW...
[ 367.152796] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 367.177747] usb-storage: Status code 0; transferred 13/13
[ 367.177751] usb-storage: -- transfer complete
[ 367.177756] usb-storage: Bulk status result = 0
[ 367.177761] usb-storage: Bulk Status S 0x53425355 T 0x806 R 0 Stat 0x0
[ 367.177766] usb-storage: scsi cmd done, result=0x0
[ 367.177773] usb-storage: *** thread sleeping.
[ 367.177858] usb-storage: queuecommand called
[ 367.177869] usb-storage: *** thread awakened.
[ 367.177874] usb-storage: Command WRITE_10 (10 bytes)
[ 367.177878] usb-storage: 2a 00 00 74 21 b7 00 00 08 00
[ 367.177897] usb-storage: Bulk Command S 0x43425355 T 0x807 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 367.177903] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 367.178744] usb-storage: Status code 0; transferred 31/31
[ 367.178749] usb-storage: -- transfer complete
[ 367.178753] usb-storage: Bulk command transfer result=0
[ 367.178759] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 367.183754] usb-storage: Status code 0; transferred 4096/4096
[ 367.183759] usb-storage: -- transfer complete
[ 367.183763] usb-storage: Bulk data transfer result 0x0
[ 367.183767] usb-storage: Attempting to get CSW...
[ 367.183772] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 367.185732] usb-storage: Status code 0; transferred 13/13
[ 367.185737] usb-storage: -- transfer complete
[ 367.185741] usb-storage: Bulk status result = 0
[ 367.185746] usb-storage: Bulk Status S 0x53425355 T 0x807 R 0 Stat 0x0
[ 367.185751] usb-storage: scsi cmd done, result=0x0
[ 367.185758] usb-storage: *** thread sleeping.
[ 370.010043] usb-storage: queuecommand called
[ 370.010066] usb-storage: *** thread awakened.
[ 370.010074] usb-storage: Command WRITE_10 (10 bytes)
[ 370.010078] usb-storage: 2a 00 00 c4 0f 57 00 00 18 00
[ 370.010098] usb-storage: Bulk Command S 0x43425355 T 0x808 L 12288 F 0 Trg 0 LUN 0 CL 10
[ 370.010104] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 370.011756] usb-storage: Status code 0; transferred 31/31
[ 370.011760] usb-storage: -- transfer complete
[ 370.011764] usb-storage: Bulk command transfer result=0
[ 370.011770] usb-storage: usb_stor_bulk_transfer_sglist: xfer 12288 bytes, 3 entries
[ 370.183772] usb-storage: Status code 0; transferred 12288/12288
[ 370.183778] usb-storage: -- transfer complete
[ 370.183782] usb-storage: Bulk data transfer result 0x0
[ 370.183786] usb-storage: Attempting to get CSW...
[ 370.183791] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 370.209762] usb-storage: Status code 0; transferred 13/13
[ 370.209767] usb-storage: -- transfer complete
[ 370.209772] usb-storage: Bulk status result = 0
[ 370.209777] usb-storage: Bulk Status S 0x53425355 T 0x808 R 0 Stat 0x0
[ 370.209782] usb-storage: scsi cmd done, result=0x0
[ 370.209790] usb-storage: *** thread sleeping.
[ 370.209822] usb-storage: queuecommand called
[ 370.209836] usb-storage: *** thread awakened.
[ 370.209842] usb-storage: Command WRITE_10 (10 bytes)
[ 370.209846] usb-storage: 2a 00 00 c4 0f e7 00 00 08 00
[ 370.209865] usb-storage: Bulk Command S 0x43425355 T 0x809 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 370.209871] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 370.210749] usb-storage: Status code 0; transferred 31/31
[ 370.210753] usb-storage: -- transfer complete
[ 370.210758] usb-storage: Bulk command transfer result=0
[ 370.210763] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 370.242750] usb-storage: Status code 0; transferred 4096/4096
[ 370.242752] usb-storage: -- transfer complete
[ 370.242754] usb-storage: Bulk data transfer result 0x0
[ 370.242756] usb-storage: Attempting to get CSW...
[ 370.242759] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 370.246745] usb-storage: Status code 0; transferred 13/13
[ 370.246747] usb-storage: -- transfer complete
[ 370.246749] usb-storage: Bulk status result = 0
[ 370.246752] usb-storage: Bulk Status S 0x53425355 T 0x809 R 0 Stat 0x0
[ 370.246755] usb-storage: scsi cmd done, result=0x0
[ 370.246759] usb-storage: *** thread sleeping.
[ 370.246774] usb-storage: queuecommand called
[ 370.246779] usb-storage: *** thread awakened.
[ 370.246781] usb-storage: Command WRITE_10 (10 bytes)
[ 370.246783] usb-storage: 2a 00 00 c5 80 3f 00 00 08 00
[ 370.246793] usb-storage: Bulk Command S 0x43425355 T 0x80a L 4096 F 0 Trg 0 LUN 0 CL 10
[ 370.246796] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 370.247731] usb-storage: Status code 0; transferred 31/31
[ 370.247733] usb-storage: -- transfer complete
[ 370.247735] usb-storage: Bulk command transfer result=0
[ 370.247738] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 370.252755] usb-storage: Status code 0; transferred 4096/4096
[ 370.252757] usb-storage: -- transfer complete
[ 370.252759] usb-storage: Bulk data transfer result 0x0
[ 370.252761] usb-storage: Attempting to get CSW...
[ 370.252764] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 370.253732] usb-storage: Status code 0; transferred 13/13
[ 370.253734] usb-storage: -- transfer complete
[ 370.253736] usb-storage: Bulk status result = 0
[ 370.253739] usb-storage: Bulk Status S 0x53425355 T 0x80a R 0 Stat 0x0
[ 370.253742] usb-storage: scsi cmd done, result=0x0
[ 370.253745] usb-storage: *** thread sleeping.
[ 377.155032] usb-storage: queuecommand called
[ 377.155067] usb-storage: *** thread awakened.
[ 377.155075] usb-storage: Command WRITE_10 (10 bytes)
[ 377.155080] usb-storage: 2a 00 00 74 21 bf 00 00 68 00
[ 377.155099] usb-storage: Bulk Command S 0x43425355 T 0x80b L 53248 F 0 Trg 0 LUN 0 CL 10
[ 377.155106] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 377.156778] usb-storage: Status code 0; transferred 31/31
[ 377.156783] usb-storage: -- transfer complete
[ 377.156788] usb-storage: Bulk command transfer result=0
[ 377.156794] usb-storage: usb_stor_bulk_transfer_sglist: xfer 53248 bytes, 13 entries
[-- Attachment #14: dmesg-log-2.log --]
[-- Type: text/plain, Size: 124850 bytes --]
590.553799] usb-storage: Bulk command transfer result=0
[ 590.553806] usb-storage: usb_stor_bulk_transfer_sglist: xfer 32768 bytes, 8 entries
[ 590.584802] usb-storage: Status code 0; transferred 32768/32768
[ 590.584808] usb-storage: -- transfer complete
[ 590.584812] usb-storage: Bulk data transfer result 0x0
[ 590.584816] usb-storage: Attempting to get CSW...
[ 590.584821] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 590.585780] usb-storage: Status code 0; transferred 13/13
[ 590.585785] usb-storage: -- transfer complete
[ 590.585790] usb-storage: Bulk status result = 0
[ 590.585795] usb-storage: Bulk Status S 0x53425355 T 0xbdf R 0 Stat 0x0
[ 590.585801] usb-storage: scsi cmd done, result=0x0
[ 590.585808] usb-storage: *** thread sleeping.
[ 590.585844] usb-storage: queuecommand called
[ 590.585855] usb-storage: *** thread awakened.
[ 590.585860] usb-storage: Command READ_10 (10 bytes)
[ 590.585864] usb-storage: 28 00 00 69 30 3f 00 00 30 00
[ 590.585883] usb-storage: Bulk Command S 0x43425355 T 0xbe0 L 24576 F 128 Trg 0 LUN 0 CL 10
[ 590.585889] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 590.586774] usb-storage: Status code 0; transferred 31/31
[ 590.586779] usb-storage: -- transfer complete
[ 590.586782] usb-storage: Bulk command transfer result=0
[ 590.586788] usb-storage: usb_stor_bulk_transfer_sglist: xfer 24576 bytes, 6 entries
[ 590.609791] usb-storage: Status code 0; transferred 24576/24576
[ 590.609796] usb-storage: -- transfer complete
[ 590.609800] usb-storage: Bulk data transfer result 0x0
[ 590.609804] usb-storage: Attempting to get CSW...
[ 590.609809] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 590.610782] usb-storage: Status code 0; transferred 13/13
[ 590.610787] usb-storage: -- transfer complete
[ 590.610792] usb-storage: Bulk status result = 0
[ 590.610797] usb-storage: Bulk Status S 0x53425355 T 0xbe0 R 0 Stat 0x0
[ 590.610803] usb-storage: scsi cmd done, result=0x0
[ 590.610811] usb-storage: *** thread sleeping.
[ 600.010044] usb-storage: queuecommand called
[ 600.010062] usb-storage: *** thread awakened.
[ 600.010069] usb-storage: Command WRITE_10 (10 bytes)
[ 600.010073] usb-storage: 2a 00 00 b8 ff 1f 00 00 58 00
[ 600.010093] usb-storage: Bulk Command S 0x43425355 T 0xbe1 L 45056 F 0 Trg 0 LUN 0 CL 10
[ 600.010099] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 600.011769] usb-storage: Status code 0; transferred 31/31
[ 600.011773] usb-storage: -- transfer complete
[ 600.011778] usb-storage: Bulk command transfer result=0
[ 600.011783] usb-storage: usb_stor_bulk_transfer_sglist: xfer 45056 bytes, 11 entries
[ 600.208801] usb-storage: Status code 0; transferred 45056/45056
[ 600.208807] usb-storage: -- transfer complete
[ 600.208812] usb-storage: Bulk data transfer result 0x0
[ 600.208815] usb-storage: Attempting to get CSW...
[ 600.208820] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 600.210791] usb-storage: Status code 0; transferred 13/13
[ 600.210797] usb-storage: -- transfer complete
[ 600.210801] usb-storage: Bulk status result = 0
[ 600.210807] usb-storage: Bulk Status S 0x53425355 T 0xbe1 R 0 Stat 0x0
[ 600.210813] usb-storage: scsi cmd done, result=0x0
[ 600.210820] usb-storage: *** thread sleeping.
[ 600.210869] usb-storage: queuecommand called
[ 600.210886] usb-storage: *** thread awakened.
[ 600.210891] usb-storage: Command WRITE_10 (10 bytes)
[ 600.210895] usb-storage: 2a 00 00 b9 25 57 00 00 58 00
[ 600.210914] usb-storage: Bulk Command S 0x43425355 T 0xbe2 L 45056 F 0 Trg 0 LUN 0 CL 10
[ 600.210920] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 600.211771] usb-storage: Status code 0; transferred 31/31
[ 600.211775] usb-storage: -- transfer complete
[ 600.211779] usb-storage: Bulk command transfer result=0
[ 600.211785] usb-storage: usb_stor_bulk_transfer_sglist: xfer 45056 bytes, 11 entries
[ 600.347803] usb-storage: Status code 0; transferred 45056/45056
[ 600.347808] usb-storage: -- transfer complete
[ 600.347812] usb-storage: Bulk data transfer result 0x0
[ 600.347816] usb-storage: Attempting to get CSW...
[ 600.347821] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 600.351776] usb-storage: Status code 0; transferred 13/13
[ 600.351781] usb-storage: -- transfer complete
[ 600.351785] usb-storage: Bulk status result = 0
[ 600.351791] usb-storage: Bulk Status S 0x53425355 T 0xbe2 R 0 Stat 0x0
[ 600.351796] usb-storage: scsi cmd done, result=0x0
[ 600.351804] usb-storage: *** thread sleeping.
[ 600.351848] usb-storage: queuecommand called
[ 600.351858] usb-storage: *** thread awakened.
[ 600.351864] usb-storage: Command WRITE_10 (10 bytes)
[ 600.351867] usb-storage: 2a 00 00 74 2e 77 00 00 48 00
[ 600.351887] usb-storage: Bulk Command S 0x43425355 T 0xbe3 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 600.351893] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 600.352768] usb-storage: Status code 0; transferred 31/31
[ 600.352774] usb-storage: -- transfer complete
[ 600.352779] usb-storage: Bulk command transfer result=0
[ 600.352786] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 600.636800] usb-storage: Status code 0; transferred 36864/36864
[ 600.636805] usb-storage: -- transfer complete
[ 600.636810] usb-storage: Bulk data transfer result 0x0
[ 600.636814] usb-storage: Attempting to get CSW...
[ 600.636818] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 600.660774] usb-storage: Status code 0; transferred 13/13
[ 600.660779] usb-storage: -- transfer complete
[ 600.660783] usb-storage: Bulk status result = 0
[ 600.660788] usb-storage: Bulk Status S 0x53425355 T 0xbe3 R 0 Stat 0x0
[ 600.660793] usb-storage: scsi cmd done, result=0x0
[ 600.660800] usb-storage: *** thread sleeping.
[ 600.660906] usb-storage: queuecommand called
[ 600.661520] usb-storage: *** thread awakened.
[ 600.661527] usb-storage: Command WRITE_10 (10 bytes)
[ 600.661531] usb-storage: 2a 00 00 74 2e bf 00 00 08 00
[ 600.661549] usb-storage: Bulk Command S 0x43425355 T 0xbe4 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 600.661555] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 600.661787] usb-storage: Status code 0; transferred 31/31
[ 600.661791] usb-storage: -- transfer complete
[ 600.661795] usb-storage: Bulk command transfer result=0
[ 600.661801] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 600.667790] usb-storage: Status code 0; transferred 4096/4096
[ 600.667795] usb-storage: -- transfer complete
[ 600.667799] usb-storage: Bulk data transfer result 0x0
[ 600.667803] usb-storage: Attempting to get CSW...
[ 600.667807] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 600.669766] usb-storage: Status code 0; transferred 13/13
[ 600.669770] usb-storage: -- transfer complete
[ 600.669774] usb-storage: Bulk status result = 0
[ 600.669779] usb-storage: Bulk Status S 0x53425355 T 0xbe4 R 0 Stat 0x0
[ 600.669784] usb-storage: scsi cmd done, result=0x0
[ 600.669791] usb-storage: *** thread sleeping.
[ 605.040168] usb-storage: queuecommand called
[ 605.040182] usb-storage: *** thread awakened.
[ 605.040188] usb-storage: Command WRITE_10 (10 bytes)
[ 605.040192] usb-storage: 2a 00 00 74 2e c7 00 00 48 00
[ 605.040211] usb-storage: Bulk Command S 0x43425355 T 0xbe5 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 605.040217] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 605.041770] usb-storage: Status code 0; transferred 31/31
[ 605.041774] usb-storage: -- transfer complete
[ 605.041778] usb-storage: Bulk command transfer result=0
[ 605.041784] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 605.196799] usb-storage: Status code 0; transferred 36864/36864
[ 605.196804] usb-storage: -- transfer complete
[ 605.196809] usb-storage: Bulk data transfer result 0x0
[ 605.196813] usb-storage: Attempting to get CSW...
[ 605.196818] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 605.201791] usb-storage: Status code 0; transferred 13/13
[ 605.201797] usb-storage: -- transfer complete
[ 605.201801] usb-storage: Bulk status result = 0
[ 605.201807] usb-storage: Bulk Status S 0x53425355 T 0xbe5 R 0 Stat 0x0
[ 605.201812] usb-storage: scsi cmd done, result=0x0
[ 605.201820] usb-storage: *** thread sleeping.
[ 605.201901] usb-storage: queuecommand called
[ 605.201916] usb-storage: *** thread awakened.
[ 605.201923] usb-storage: Command WRITE_10 (10 bytes)
[ 605.201927] usb-storage: 2a 00 00 74 2f 0f 00 00 08 00
[ 605.201946] usb-storage: Bulk Command S 0x43425355 T 0xbe6 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 605.201952] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 605.202787] usb-storage: Status code 0; transferred 31/31
[ 605.202792] usb-storage: -- transfer complete
[ 605.202798] usb-storage: Bulk command transfer result=0
[ 605.202803] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 605.208801] usb-storage: Status code 0; transferred 4096/4096
[ 605.208805] usb-storage: -- transfer complete
[ 605.208810] usb-storage: Bulk data transfer result 0x0
[ 605.208814] usb-storage: Attempting to get CSW...
[ 605.208819] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 605.210783] usb-storage: Status code 0; transferred 13/13
[ 605.210787] usb-storage: -- transfer complete
[ 605.210792] usb-storage: Bulk status result = 0
[ 605.210798] usb-storage: Bulk Status S 0x53425355 T 0xbe6 R 0 Stat 0x0
[ 605.210803] usb-storage: scsi cmd done, result=0x0
[ 605.210810] usb-storage: *** thread sleeping.
[ 609.946035] usb-storage: queuecommand called
[ 609.946083] usb-storage: *** thread awakened.
[ 609.946092] usb-storage: Command WRITE_10 (10 bytes)
[ 609.946096] usb-storage: 2a 00 00 b9 24 ef 00 00 08 00
[ 609.946117] usb-storage: Bulk Command S 0x43425355 T 0xbe7 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 609.946123] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 609.947802] usb-storage: Status code 0; transferred 31/31
[ 609.947807] usb-storage: -- transfer complete
[ 609.947811] usb-storage: Bulk command transfer result=0
[ 609.947817] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 609.961818] usb-storage: Status code 0; transferred 4096/4096
[ 609.961825] usb-storage: -- transfer complete
[ 609.961830] usb-storage: Bulk data transfer result 0x0
[ 609.961834] usb-storage: Attempting to get CSW...
[ 609.961840] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 609.986771] usb-storage: Status code 0; transferred 13/13
[ 609.986776] usb-storage: -- transfer complete
[ 609.986781] usb-storage: Bulk status result = 0
[ 609.986786] usb-storage: Bulk Status S 0x53425355 T 0xbe7 R 0 Stat 0x0
[ 609.986793] usb-storage: scsi cmd done, result=0x0
[ 609.986802] usb-storage: *** thread sleeping.
[ 609.986844] usb-storage: queuecommand called
[ 609.986855] usb-storage: *** thread awakened.
[ 609.986861] usb-storage: Command WRITE_10 (10 bytes)
[ 609.986865] usb-storage: 2a 00 00 74 2f 17 00 00 50 00
[ 609.986884] usb-storage: Bulk Command S 0x43425355 T 0xbe8 L 40960 F 0 Trg 0 LUN 0 CL 10
[ 609.986890] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 609.987784] usb-storage: Status code 0; transferred 31/31
[ 609.987789] usb-storage: -- transfer complete
[ 609.987793] usb-storage: Bulk command transfer result=0
[ 609.987799] usb-storage: usb_stor_bulk_transfer_sglist: xfer 40960 bytes, 10 entries
[ 610.151340] wlan0: direct probe to AP 00:1c:10:32:94:61 try 1
[ 610.350077] wlan0: direct probe to AP 00:1c:10:32:94:61 try 2
[ 610.363807] usb-storage: Status code 0; transferred 40960/40960
[ 610.363812] usb-storage: -- transfer complete
[ 610.363816] usb-storage: Bulk data transfer result 0x0
[ 610.363821] usb-storage: Attempting to get CSW...
[ 610.363826] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 610.365785] usb-storage: Status code 0; transferred 13/13
[ 610.365789] usb-storage: -- transfer complete
[ 610.365793] usb-storage: Bulk status result = 0
[ 610.365799] usb-storage: Bulk Status S 0x53425355 T 0xbe8 R 0 Stat 0x0
[ 610.365804] usb-storage: scsi cmd done, result=0x0
[ 610.365811] usb-storage: *** thread sleeping.
[ 610.365849] usb-storage: queuecommand called
[ 610.365865] usb-storage: *** thread awakened.
[ 610.365871] usb-storage: Command WRITE_10 (10 bytes)
[ 610.365875] usb-storage: 2a 00 00 c4 d7 f7 00 00 08 00
[ 610.365894] usb-storage: Bulk Command S 0x43425355 T 0xbe9 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 610.365900] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 610.366784] usb-storage: Status code 0; transferred 31/31
[ 610.366788] usb-storage: -- transfer complete
[ 610.366792] usb-storage: Bulk command transfer result=0
[ 610.366798] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 610.435798] usb-storage: Status code 0; transferred 4096/4096
[ 610.435802] usb-storage: -- transfer complete
[ 610.435807] usb-storage: Bulk data transfer result 0x0
[ 610.435810] usb-storage: Attempting to get CSW...
[ 610.435815] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 610.460779] usb-storage: Status code 0; transferred 13/13
[ 610.460783] usb-storage: -- transfer complete
[ 610.460788] usb-storage: Bulk status result = 0
[ 610.460793] usb-storage: Bulk Status S 0x53425355 T 0xbe9 R 0 Stat 0x0
[ 610.460798] usb-storage: scsi cmd done, result=0x0
[ 610.460805] usb-storage: *** thread sleeping.
[ 610.460827] usb-storage: queuecommand called
[ 610.460841] usb-storage: *** thread awakened.
[ 610.460847] usb-storage: Command WRITE_10 (10 bytes)
[ 610.460850] usb-storage: 2a 00 00 c5 80 3f 00 00 08 00
[ 610.460869] usb-storage: Bulk Command S 0x43425355 T 0xbea L 4096 F 0 Trg 0 LUN 0 CL 10
[ 610.460875] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 610.461787] usb-storage: Status code 0; transferred 31/31
[ 610.461791] usb-storage: -- transfer complete
[ 610.461795] usb-storage: Bulk command transfer result=0
[ 610.461800] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 610.466804] usb-storage: Status code 0; transferred 4096/4096
[ 610.466808] usb-storage: -- transfer complete
[ 610.466813] usb-storage: Bulk data transfer result 0x0
[ 610.466816] usb-storage: Attempting to get CSW...
[ 610.466821] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 610.467770] usb-storage: Status code 0; transferred 13/13
[ 610.467775] usb-storage: -- transfer complete
[ 610.467778] usb-storage: Bulk status result = 0
[ 610.467784] usb-storage: Bulk Status S 0x53425355 T 0xbea R 0 Stat 0x0
[ 610.467789] usb-storage: scsi cmd done, result=0x0
[ 610.467795] usb-storage: *** thread sleeping.
[ 610.467812] usb-storage: queuecommand called
[ 610.467826] usb-storage: *** thread awakened.
[ 610.467831] usb-storage: Command WRITE_10 (10 bytes)
[ 610.467834] usb-storage: 2a 00 00 c4 0f 57 00 00 18 00
[ 610.467853] usb-storage: Bulk Command S 0x43425355 T 0xbeb L 12288 F 0 Trg 0 LUN 0 CL 10
[ 610.467858] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 610.468783] usb-storage: Status code 0; transferred 31/31
[ 610.468787] usb-storage: -- transfer complete
[ 610.468791] usb-storage: Bulk command transfer result=0
[ 610.468796] usb-storage: usb_stor_bulk_transfer_sglist: xfer 12288 bytes, 3 entries
[ 610.552537] wlan0: direct probe to AP 00:1c:10:32:94:61 try 3
[ 610.630798] usb-storage: Status code 0; transferred 12288/12288
[ 610.630803] usb-storage: -- transfer complete
[ 610.630808] usb-storage: Bulk data transfer result 0x0
[ 610.630812] usb-storage: Attempting to get CSW...
[ 610.630817] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 610.632789] usb-storage: Status code 0; transferred 13/13
[ 610.632795] usb-storage: -- transfer complete
[ 610.632800] usb-storage: Bulk status result = 0
[ 610.632807] usb-storage: Bulk Status S 0x53425355 T 0xbeb R 0 Stat 0x0
[ 610.632813] usb-storage: scsi cmd done, result=0x0
[ 610.632821] usb-storage: *** thread sleeping.
[ 610.632848] usb-storage: queuecommand called
[ 610.632863] usb-storage: *** thread awakened.
[ 610.632870] usb-storage: Command WRITE_10 (10 bytes)
[ 610.632874] usb-storage: 2a 00 00 c4 0f e7 00 00 08 00
[ 610.632897] usb-storage: Bulk Command S 0x43425355 T 0xbec L 4096 F 0 Trg 0 LUN 0 CL 10
[ 610.632904] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 610.633781] usb-storage: Status code 0; transferred 31/31
[ 610.633787] usb-storage: -- transfer complete
[ 610.633792] usb-storage: Bulk command transfer result=0
[ 610.633798] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 610.665798] usb-storage: Status code 0; transferred 4096/4096
[ 610.665802] usb-storage: -- transfer complete
[ 610.665806] usb-storage: Bulk data transfer result 0x0
[ 610.665810] usb-storage: Attempting to get CSW...
[ 610.665815] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 610.669785] usb-storage: Status code 0; transferred 13/13
[ 610.669789] usb-storage: -- transfer complete
[ 610.669792] usb-storage: Bulk status result = 0
[ 610.669798] usb-storage: Bulk Status S 0x53425355 T 0xbec R 0 Stat 0x0
[ 610.669803] usb-storage: scsi cmd done, result=0x0
[ 610.669809] usb-storage: *** thread sleeping.
[ 610.669827] usb-storage: queuecommand called
[ 610.669836] usb-storage: *** thread awakened.
[ 610.669841] usb-storage: Command WRITE_10 (10 bytes)
[ 610.669845] usb-storage: 2a 00 00 74 2f 67 00 00 08 00
[ 610.669863] usb-storage: Bulk Command S 0x43425355 T 0xbed L 4096 F 0 Trg 0 LUN 0 CL 10
[ 610.669868] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 610.670765] usb-storage: Status code 0; transferred 31/31
[ 610.670770] usb-storage: -- transfer complete
[ 610.670774] usb-storage: Bulk command transfer result=0
[ 610.670780] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 610.750044] wlan0: direct probe to AP 00:1c:10:32:94:61 timed out
[ 611.096798] usb-storage: Status code 0; transferred 4096/4096
[ 611.096802] usb-storage: -- transfer complete
[ 611.096807] usb-storage: Bulk data transfer result 0x0
[ 611.096811] usb-storage: Attempting to get CSW...
[ 611.096816] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 611.120790] usb-storage: Status code 0; transferred 13/13
[ 611.120794] usb-storage: -- transfer complete
[ 611.120798] usb-storage: Bulk status result = 0
[ 611.120803] usb-storage: Bulk Status S 0x53425355 T 0xbed R 0 Stat 0x0
[ 611.120809] usb-storage: scsi cmd done, result=0x0
[ 611.120816] usb-storage: *** thread sleeping.
[ 611.121008] usb-storage: queuecommand called
[ 611.121022] usb-storage: *** thread awakened.
[ 611.121027] usb-storage: Command WRITE_10 (10 bytes)
[ 611.121031] usb-storage: 2a 00 00 b9 24 ef 00 00 08 00
[ 611.121050] usb-storage: Bulk Command S 0x43425355 T 0xbee L 4096 F 0 Trg 0 LUN 0 CL 10
[ 611.121056] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 611.121778] usb-storage: Status code 0; transferred 31/31
[ 611.121783] usb-storage: -- transfer complete
[ 611.121787] usb-storage: Bulk command transfer result=0
[ 611.121792] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 611.319797] usb-storage: Status code 0; transferred 4096/4096
[ 611.319802] usb-storage: -- transfer complete
[ 611.319806] usb-storage: Bulk data transfer result 0x0
[ 611.319810] usb-storage: Attempting to get CSW...
[ 611.319815] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 611.320764] usb-storage: Status code 0; transferred 13/13
[ 611.320769] usb-storage: -- transfer complete
[ 611.320773] usb-storage: Bulk status result = 0
[ 611.320778] usb-storage: Bulk Status S 0x53425355 T 0xbee R 0 Stat 0x0
[ 611.320783] usb-storage: scsi cmd done, result=0x0
[ 611.320790] usb-storage: *** thread sleeping.
[ 611.320811] usb-storage: queuecommand called
[ 611.320821] usb-storage: *** thread awakened.
[ 611.320826] usb-storage: Command WRITE_10 (10 bytes)
[ 611.320829] usb-storage: 2a 00 00 74 2f 6f 00 00 10 00
[ 611.320848] usb-storage: Bulk Command S 0x43425355 T 0xbef L 8192 F 0 Trg 0 LUN 0 CL 10
[ 611.320853] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 611.321789] usb-storage: Status code 0; transferred 31/31
[ 611.321796] usb-storage: -- transfer complete
[ 611.321801] usb-storage: Bulk command transfer result=0
[ 611.321808] usb-storage: usb_stor_bulk_transfer_sglist: xfer 8192 bytes, 2 entries
[ 611.681796] usb-storage: Status code 0; transferred 8192/8192
[ 611.681801] usb-storage: -- transfer complete
[ 611.681805] usb-storage: Bulk data transfer result 0x0
[ 611.681809] usb-storage: Attempting to get CSW...
[ 611.681814] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 611.683768] usb-storage: Status code 0; transferred 13/13
[ 611.683773] usb-storage: -- transfer complete
[ 611.683777] usb-storage: Bulk status result = 0
[ 611.683782] usb-storage: Bulk Status S 0x53425355 T 0xbef R 0 Stat 0x0
[ 611.683787] usb-storage: scsi cmd done, result=0x0
[ 611.683793] usb-storage: *** thread sleeping.
[ 611.683859] usb-storage: queuecommand called
[ 611.683887] usb-storage: *** thread awakened.
[ 611.683893] usb-storage: Command WRITE_10 (10 bytes)
[ 611.683896] usb-storage: 2a 00 00 74 2f 7f 00 00 08 00
[ 611.683915] usb-storage: Bulk Command S 0x43425355 T 0xbf0 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 611.683920] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 611.684783] usb-storage: Status code 0; transferred 31/31
[ 611.684787] usb-storage: -- transfer complete
[ 611.684791] usb-storage: Bulk command transfer result=0
[ 611.684797] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 611.689786] usb-storage: Status code 0; transferred 4096/4096
[ 611.689790] usb-storage: -- transfer complete
[ 611.689794] usb-storage: Bulk data transfer result 0x0
[ 611.689798] usb-storage: Attempting to get CSW...
[ 611.689803] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 611.691784] usb-storage: Status code 0; transferred 13/13
[ 611.691789] usb-storage: -- transfer complete
[ 611.691794] usb-storage: Bulk status result = 0
[ 611.691800] usb-storage: Bulk Status S 0x53425355 T 0xbf0 R 0 Stat 0x0
[ 611.691807] usb-storage: scsi cmd done, result=0x0
[ 611.691814] usb-storage: *** thread sleeping.
[ 617.012651] usb-storage: queuecommand called
[ 617.012666] usb-storage: *** thread awakened.
[ 617.012672] usb-storage: Command WRITE_10 (10 bytes)
[ 617.012676] usb-storage: 2a 00 00 74 2f 87 00 00 48 00
[ 617.012695] usb-storage: Bulk Command S 0x43425355 T 0xbf1 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 617.012702] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 617.013772] usb-storage: Status code 0; transferred 31/31
[ 617.013777] usb-storage: -- transfer complete
[ 617.013781] usb-storage: Bulk command transfer result=0
[ 617.013787] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 617.199808] usb-storage: Status code 0; transferred 36864/36864
[ 617.199813] usb-storage: -- transfer complete
[ 617.199818] usb-storage: Bulk data transfer result 0x0
[ 617.199822] usb-storage: Attempting to get CSW...
[ 617.199827] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 617.204796] usb-storage: Status code 0; transferred 13/13
[ 617.204800] usb-storage: -- transfer complete
[ 617.204805] usb-storage: Bulk status result = 0
[ 617.204810] usb-storage: Bulk Status S 0x53425355 T 0xbf1 R 0 Stat 0x0
[ 617.204816] usb-storage: scsi cmd done, result=0x0
[ 617.204823] usb-storage: *** thread sleeping.
[ 617.204908] usb-storage: queuecommand called
[ 617.204919] usb-storage: *** thread awakened.
[ 617.204924] usb-storage: Command WRITE_10 (10 bytes)
[ 617.204928] usb-storage: 2a 00 00 74 2f cf 00 00 08 00
[ 617.204947] usb-storage: Bulk Command S 0x43425355 T 0xbf2 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 617.204953] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 617.205793] usb-storage: Status code 0; transferred 31/31
[ 617.205798] usb-storage: -- transfer complete
[ 617.205802] usb-storage: Bulk command transfer result=0
[ 617.205808] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 617.211789] usb-storage: Status code 0; transferred 4096/4096
[ 617.211794] usb-storage: -- transfer complete
[ 617.211798] usb-storage: Bulk data transfer result 0x0
[ 617.211802] usb-storage: Attempting to get CSW...
[ 617.211807] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 617.213788] usb-storage: Status code 0; transferred 13/13
[ 617.213793] usb-storage: -- transfer complete
[ 617.213797] usb-storage: Bulk status result = 0
[ 617.213803] usb-storage: Bulk Status S 0x53425355 T 0xbf2 R 0 Stat 0x0
[ 617.213808] usb-storage: scsi cmd done, result=0x0
[ 617.213815] usb-storage: *** thread sleeping.
[ 625.010045] usb-storage: queuecommand called
[ 625.010075] usb-storage: *** thread awakened.
[ 625.010083] usb-storage: Command WRITE_10 (10 bytes)
[ 625.010087] usb-storage: 2a 00 00 b9 1e 37 00 00 60 00
[ 625.010107] usb-storage: Bulk Command S 0x43425355 T 0xbf3 L 49152 F 0 Trg 0 LUN 0 CL 10
[ 625.010113] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 625.011786] usb-storage: Status code 0; transferred 31/31
[ 625.011790] usb-storage: -- transfer complete
[ 625.011795] usb-storage: Bulk command transfer result=0
[ 625.011800] usb-storage: usb_stor_bulk_transfer_sglist: xfer 49152 bytes, 12 entries
[ 625.166820] usb-storage: Status code 0; transferred 49152/49152
[ 625.166825] usb-storage: -- transfer complete
[ 625.166830] usb-storage: Bulk data transfer result 0x0
[ 625.166834] usb-storage: Attempting to get CSW...
[ 625.166839] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 625.191780] usb-storage: Status code 0; transferred 13/13
[ 625.191784] usb-storage: -- transfer complete
[ 625.191788] usb-storage: Bulk status result = 0
[ 625.191794] usb-storage: Bulk Status S 0x53425355 T 0xbf3 R 0 Stat 0x0
[ 625.191799] usb-storage: scsi cmd done, result=0x0
[ 625.191807] usb-storage: *** thread sleeping.
[ 625.191853] usb-storage: queuecommand called
[ 625.191863] usb-storage: *** thread awakened.
[ 625.191868] usb-storage: Command WRITE_10 (10 bytes)
[ 625.191872] usb-storage: 2a 00 00 74 2f d7 00 00 48 00
[ 625.191891] usb-storage: Bulk Command S 0x43425355 T 0xbf4 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 625.191897] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 625.192768] usb-storage: Status code 0; transferred 31/31
[ 625.192772] usb-storage: -- transfer complete
[ 625.192776] usb-storage: Bulk command transfer result=0
[ 625.192782] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 625.500815] usb-storage: Status code 0; transferred 36864/36864
[ 625.500820] usb-storage: -- transfer complete
[ 625.500824] usb-storage: Bulk data transfer result 0x0
[ 625.500828] usb-storage: Attempting to get CSW...
[ 625.500833] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 625.525790] usb-storage: Status code 0; transferred 13/13
[ 625.525794] usb-storage: -- transfer complete
[ 625.525798] usb-storage: Bulk status result = 0
[ 625.525804] usb-storage: Bulk Status S 0x53425355 T 0xbf4 R 0 Stat 0x0
[ 625.525809] usb-storage: scsi cmd done, result=0x0
[ 625.525816] usb-storage: *** thread sleeping.
[ 625.525903] usb-storage: queuecommand called
[ 625.525932] usb-storage: *** thread awakened.
[ 625.525938] usb-storage: Command WRITE_10 (10 bytes)
[ 625.525942] usb-storage: 2a 00 00 74 30 1f 00 00 08 00
[ 625.525961] usb-storage: Bulk Command S 0x43425355 T 0xbf5 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 625.525967] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 625.526787] usb-storage: Status code 0; transferred 31/31
[ 625.526791] usb-storage: -- transfer complete
[ 625.526795] usb-storage: Bulk command transfer result=0
[ 625.526800] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 625.532785] usb-storage: Status code 0; transferred 4096/4096
[ 625.532789] usb-storage: -- transfer complete
[ 625.532794] usb-storage: Bulk data transfer result 0x0
[ 625.532797] usb-storage: Attempting to get CSW...
[ 625.532802] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 625.533790] usb-storage: Status code 0; transferred 13/13
[ 625.533796] usb-storage: -- transfer complete
[ 625.533801] usb-storage: Bulk status result = 0
[ 625.533806] usb-storage: Bulk Status S 0x53425355 T 0xbf5 R 0 Stat 0x0
[ 625.533813] usb-storage: scsi cmd done, result=0x0
[ 625.533820] usb-storage: *** thread sleeping.
[ 630.012649] usb-storage: queuecommand called
[ 630.012661] usb-storage: *** thread awakened.
[ 630.012667] usb-storage: Command WRITE_10 (10 bytes)
[ 630.012671] usb-storage: 2a 00 00 74 30 27 00 00 48 00
[ 630.012691] usb-storage: Bulk Command S 0x43425355 T 0xbf6 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 630.012697] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 630.013773] usb-storage: Status code 0; transferred 31/31
[ 630.013777] usb-storage: -- transfer complete
[ 630.013782] usb-storage: Bulk command transfer result=0
[ 630.013787] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 630.053804] usb-storage: Status code 0; transferred 36864/36864
[ 630.053809] usb-storage: -- transfer complete
[ 630.053814] usb-storage: Bulk data transfer result 0x0
[ 630.053817] usb-storage: Attempting to get CSW...
[ 630.053822] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 630.058778] usb-storage: Status code 0; transferred 13/13
[ 630.058784] usb-storage: -- transfer complete
[ 630.058788] usb-storage: Bulk status result = 0
[ 630.058793] usb-storage: Bulk Status S 0x53425355 T 0xbf6 R 0 Stat 0x0
[ 630.058798] usb-storage: scsi cmd done, result=0x0
[ 630.058806] usb-storage: *** thread sleeping.
[ 630.058899] usb-storage: queuecommand called
[ 630.058928] usb-storage: *** thread awakened.
[ 630.058934] usb-storage: Command WRITE_10 (10 bytes)
[ 630.058938] usb-storage: 2a 00 00 74 30 6f 00 00 08 00
[ 630.058956] usb-storage: Bulk Command S 0x43425355 T 0xbf7 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 630.058962] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 630.059784] usb-storage: Status code 0; transferred 31/31
[ 630.059788] usb-storage: -- transfer complete
[ 630.059792] usb-storage: Bulk command transfer result=0
[ 630.059798] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 630.065804] usb-storage: Status code 0; transferred 4096/4096
[ 630.065810] usb-storage: -- transfer complete
[ 630.065814] usb-storage: Bulk data transfer result 0x0
[ 630.065818] usb-storage: Attempting to get CSW...
[ 630.065824] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 630.067787] usb-storage: Status code 0; transferred 13/13
[ 630.067791] usb-storage: -- transfer complete
[ 630.067797] usb-storage: Bulk status result = 0
[ 630.067802] usb-storage: Bulk Status S 0x53425355 T 0xbf7 R 0 Stat 0x0
[ 630.067808] usb-storage: scsi cmd done, result=0x0
[ 630.067816] usb-storage: *** thread sleeping.
[ 635.010041] usb-storage: queuecommand called
[ 635.010073] usb-storage: *** thread awakened.
[ 635.010081] usb-storage: Command WRITE_10 (10 bytes)
[ 635.010085] usb-storage: 2a 00 00 b8 ff 6f 00 00 60 00
[ 635.010105] usb-storage: Bulk Command S 0x43425355 T 0xbf8 L 49152 F 0 Trg 0 LUN 0 CL 10
[ 635.010111] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 635.011775] usb-storage: Status code 0; transferred 31/31
[ 635.011779] usb-storage: -- transfer complete
[ 635.011784] usb-storage: Bulk command transfer result=0
[ 635.011789] usb-storage: usb_stor_bulk_transfer_sglist: xfer 49152 bytes, 12 entries
[ 635.223812] usb-storage: Status code 0; transferred 49152/49152
[ 635.223817] usb-storage: -- transfer complete
[ 635.223822] usb-storage: Bulk data transfer result 0x0
[ 635.223827] usb-storage: Attempting to get CSW...
[ 635.223832] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 635.248781] usb-storage: Status code 0; transferred 13/13
[ 635.248787] usb-storage: -- transfer complete
[ 635.248791] usb-storage: Bulk status result = 0
[ 635.248797] usb-storage: Bulk Status S 0x53425355 T 0xbf8 R 0 Stat 0x0
[ 635.248803] usb-storage: scsi cmd done, result=0x0
[ 635.248810] usb-storage: *** thread sleeping.
[ 635.248863] usb-storage: queuecommand called
[ 635.248878] usb-storage: *** thread awakened.
[ 635.248884] usb-storage: Command WRITE_10 (10 bytes)
[ 635.248888] usb-storage: 2a 00 00 b9 25 a7 00 00 60 00
[ 635.248907] usb-storage: Bulk Command S 0x43425355 T 0xbf9 L 49152 F 0 Trg 0 LUN 0 CL 10
[ 635.248913] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 635.249787] usb-storage: Status code 0; transferred 31/31
[ 635.249791] usb-storage: -- transfer complete
[ 635.249795] usb-storage: Bulk command transfer result=0
[ 635.249801] usb-storage: usb_stor_bulk_transfer_sglist: xfer 49152 bytes, 12 entries
[ 635.388804] usb-storage: Status code 0; transferred 49152/49152
[ 635.388809] usb-storage: -- transfer complete
[ 635.388814] usb-storage: Bulk data transfer result 0x0
[ 635.388818] usb-storage: Attempting to get CSW...
[ 635.388823] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 635.390771] usb-storage: Status code 0; transferred 13/13
[ 635.390775] usb-storage: -- transfer complete
[ 635.390779] usb-storage: Bulk status result = 0
[ 635.390784] usb-storage: Bulk Status S 0x53425355 T 0xbf9 R 0 Stat 0x0
[ 635.390789] usb-storage: scsi cmd done, result=0x0
[ 635.390795] usb-storage: *** thread sleeping.
[ 635.390842] usb-storage: queuecommand called
[ 635.390858] usb-storage: *** thread awakened.
[ 635.390864] usb-storage: Command WRITE_10 (10 bytes)
[ 635.390867] usb-storage: 2a 00 00 74 30 77 00 00 10 00
[ 635.390886] usb-storage: Bulk Command S 0x43425355 T 0xbfa L 8192 F 0 Trg 0 LUN 0 CL 10
[ 635.390892] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 635.391794] usb-storage: Status code 0; transferred 31/31
[ 635.391799] usb-storage: -- transfer complete
[ 635.391803] usb-storage: Bulk command transfer result=0
[ 635.391809] usb-storage: usb_stor_bulk_transfer_sglist: xfer 8192 bytes, 2 entries
[ 635.548797] usb-storage: Status code 0; transferred 8192/8192
[ 635.548801] usb-storage: -- transfer complete
[ 635.548805] usb-storage: Bulk data transfer result 0x0
[ 635.548809] usb-storage: Attempting to get CSW...
[ 635.548814] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 635.573780] usb-storage: Status code 0; transferred 13/13
[ 635.573784] usb-storage: -- transfer complete
[ 635.573788] usb-storage: Bulk status result = 0
[ 635.573793] usb-storage: Bulk Status S 0x53425355 T 0xbfa R 0 Stat 0x0
[ 635.573798] usb-storage: scsi cmd done, result=0x0
[ 635.573805] usb-storage: *** thread sleeping.
[ 635.573827] usb-storage: queuecommand called
[ 635.573837] usb-storage: *** thread awakened.
[ 635.573842] usb-storage: Command WRITE_10 (10 bytes)
[ 635.573846] usb-storage: 2a 00 00 74 30 97 00 00 38 00
[ 635.573865] usb-storage: Bulk Command S 0x43425355 T 0xbfb L 28672 F 0 Trg 0 LUN 0 CL 10
[ 635.573870] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 635.574792] usb-storage: Status code 0; transferred 31/31
[ 635.574797] usb-storage: -- transfer complete
[ 635.574801] usb-storage: Bulk command transfer result=0
[ 635.574807] usb-storage: usb_stor_bulk_transfer_sglist: xfer 28672 bytes, 7 entries
[ 635.612803] usb-storage: Status code 0; transferred 28672/28672
[ 635.612808] usb-storage: -- transfer complete
[ 635.612812] usb-storage: Bulk data transfer result 0x0
[ 635.612816] usb-storage: Attempting to get CSW...
[ 635.612821] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 635.616779] usb-storage: Status code 0; transferred 13/13
[ 635.616783] usb-storage: -- transfer complete
[ 635.616787] usb-storage: Bulk status result = 0
[ 635.616792] usb-storage: Bulk Status S 0x53425355 T 0xbfb R 0 Stat 0x0
[ 635.616797] usb-storage: scsi cmd done, result=0x0
[ 635.616803] usb-storage: *** thread sleeping.
[ 635.616883] usb-storage: queuecommand called
[ 635.616894] usb-storage: *** thread awakened.
[ 635.616900] usb-storage: Command WRITE_10 (10 bytes)
[ 635.616903] usb-storage: 2a 00 00 74 30 cf 00 00 08 00
[ 635.616922] usb-storage: Bulk Command S 0x43425355 T 0xbfc L 4096 F 0 Trg 0 LUN 0 CL 10
[ 635.616928] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 635.618378] usb-storage: Status code 0; transferred 31/31
[ 635.618383] usb-storage: -- transfer complete
[ 635.618387] usb-storage: Bulk command transfer result=0
[ 635.618393] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 635.623811] usb-storage: Status code 0; transferred 4096/4096
[ 635.623816] usb-storage: -- transfer complete
[ 635.623821] usb-storage: Bulk data transfer result 0x0
[ 635.623825] usb-storage: Attempting to get CSW...
[ 635.623831] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 635.625787] usb-storage: Status code 0; transferred 13/13
[ 635.625792] usb-storage: -- transfer complete
[ 635.625796] usb-storage: Bulk status result = 0
[ 635.625801] usb-storage: Bulk Status S 0x53425355 T 0xbfc R 0 Stat 0x0
[ 635.625808] usb-storage: scsi cmd done, result=0x0
[ 635.625815] usb-storage: *** thread sleeping.
[ 640.676220] usb-storage: queuecommand called
[ 640.676240] usb-storage: *** thread awakened.
[ 640.676247] usb-storage: Command WRITE_10 (10 bytes)
[ 640.676251] usb-storage: 2a 00 00 74 30 d7 00 00 68 00
[ 640.676271] usb-storage: Bulk Command S 0x43425355 T 0xbfd L 53248 F 0 Trg 0 LUN 0 CL 10
[ 640.676278] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 640.677810] usb-storage: Status code 0; transferred 31/31
[ 640.677815] usb-storage: -- transfer complete
[ 640.677819] usb-storage: Bulk command transfer result=0
[ 640.677825] usb-storage: usb_stor_bulk_transfer_sglist: xfer 53248 bytes, 13 entries
[ 640.764816] usb-storage: Status code 0; transferred 53248/53248
[ 640.764822] usb-storage: -- transfer complete
[ 640.764826] usb-storage: Bulk data transfer result 0x0
[ 640.764831] usb-storage: Attempting to get CSW...
[ 640.764836] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 640.768794] usb-storage: Status code 0; transferred 13/13
[ 640.768799] usb-storage: -- transfer complete
[ 640.768804] usb-storage: Bulk status result = 0
[ 640.768810] usb-storage: Bulk Status S 0x53425355 T 0xbfd R 0 Stat 0x0
[ 640.768816] usb-storage: scsi cmd done, result=0x0
[ 640.768825] usb-storage: *** thread sleeping.
[ 640.768871] usb-storage: queuecommand called
[ 640.768886] usb-storage: *** thread awakened.
[ 640.768892] usb-storage: Command READ_10 (10 bytes)
[ 640.768896] usb-storage: 28 00 00 0c c0 af 00 00 20 00
[ 640.768916] usb-storage: Bulk Command S 0x43425355 T 0xbfe L 16384 F 128 Trg 0 LUN 0 CL 10
[ 640.768922] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 640.769789] usb-storage: Status code 0; transferred 31/31
[ 640.769793] usb-storage: -- transfer complete
[ 640.769797] usb-storage: Bulk command transfer result=0
[ 640.769803] usb-storage: usb_stor_bulk_transfer_sglist: xfer 16384 bytes, 4 entries
[ 640.913815] usb-storage: Status code 0; transferred 16384/16384
[ 640.913820] usb-storage: -- transfer complete
[ 640.913824] usb-storage: Bulk data transfer result 0x0
[ 640.913828] usb-storage: Attempting to get CSW...
[ 640.913832] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 640.914772] usb-storage: Status code 0; transferred 13/13
[ 640.914777] usb-storage: -- transfer complete
[ 640.914781] usb-storage: Bulk status result = 0
[ 640.914786] usb-storage: Bulk Status S 0x53425355 T 0xbfe R 0 Stat 0x0
[ 640.914791] usb-storage: scsi cmd done, result=0x0
[ 640.914799] usb-storage: *** thread sleeping.
[ 640.914827] usb-storage: queuecommand called
[ 640.914843] usb-storage: *** thread awakened.
[ 640.914848] usb-storage: Command WRITE_10 (10 bytes)
[ 640.914852] usb-storage: 2a 00 00 b9 24 ef 00 00 08 00
[ 640.914871] usb-storage: Bulk Command S 0x43425355 T 0xbff L 4096 F 0 Trg 0 LUN 0 CL 10
[ 640.914877] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 640.915794] usb-storage: Status code 0; transferred 31/31
[ 640.915799] usb-storage: -- transfer complete
[ 640.915803] usb-storage: Bulk command transfer result=0
[ 640.915808] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 640.929810] usb-storage: Status code 0; transferred 4096/4096
[ 640.929815] usb-storage: -- transfer complete
[ 640.929820] usb-storage: Bulk data transfer result 0x0
[ 640.929824] usb-storage: Attempting to get CSW...
[ 640.929829] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 640.954773] usb-storage: Status code 0; transferred 13/13
[ 640.954777] usb-storage: -- transfer complete
[ 640.954782] usb-storage: Bulk status result = 0
[ 640.954787] usb-storage: Bulk Status S 0x53425355 T 0xbff R 0 Stat 0x0
[ 640.954793] usb-storage: scsi cmd done, result=0x0
[ 640.954800] usb-storage: *** thread sleeping.
[ 640.954827] usb-storage: queuecommand called
[ 640.954842] usb-storage: *** thread awakened.
[ 640.954848] usb-storage: Command WRITE_10 (10 bytes)
[ 640.954852] usb-storage: 2a 00 00 74 31 3f 00 00 08 00
[ 640.954870] usb-storage: Bulk Command S 0x43425355 T 0xc00 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 640.954876] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 640.955774] usb-storage: Status code 0; transferred 31/31
[ 640.955778] usb-storage: -- transfer complete
[ 640.955782] usb-storage: Bulk command transfer result=0
[ 640.955787] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 641.163803] usb-storage: Status code 0; transferred 4096/4096
[ 641.163808] usb-storage: -- transfer complete
[ 641.163812] usb-storage: Bulk data transfer result 0x0
[ 641.163816] usb-storage: Attempting to get CSW...
[ 641.163820] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 641.164780] usb-storage: Status code 0; transferred 13/13
[ 641.164784] usb-storage: -- transfer complete
[ 641.164788] usb-storage: Bulk status result = 0
[ 641.164793] usb-storage: Bulk Status S 0x53425355 T 0xc00 R 0 Stat 0x0
[ 641.164798] usb-storage: scsi cmd done, result=0x0
[ 641.164805] usb-storage: *** thread sleeping.
[ 641.164827] usb-storage: queuecommand called
[ 641.164837] usb-storage: *** thread awakened.
[ 641.164841] usb-storage: Command READ_10 (10 bytes)
[ 641.164845] usb-storage: 28 00 00 0c c1 0f 00 00 08 00
[ 641.164864] usb-storage: Bulk Command S 0x43425355 T 0xc01 L 4096 F 128 Trg 0 LUN 0 CL 10
[ 641.164870] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 641.165777] usb-storage: Status code 0; transferred 31/31
[ 641.165781] usb-storage: -- transfer complete
[ 641.165785] usb-storage: Bulk command transfer result=0
[ 641.165790] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 641.169798] usb-storage: Status code 0; transferred 4096/4096
[ 641.169803] usb-storage: -- transfer complete
[ 641.169807] usb-storage: Bulk data transfer result 0x0
[ 641.169810] usb-storage: Attempting to get CSW...
[ 641.169815] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 641.170769] usb-storage: Status code 0; transferred 13/13
[ 641.170773] usb-storage: -- transfer complete
[ 641.170777] usb-storage: Bulk status result = 0
[ 641.170783] usb-storage: Bulk Status S 0x53425355 T 0xc01 R 0 Stat 0x0
[ 641.170788] usb-storage: scsi cmd done, result=0x0
[ 641.170794] usb-storage: *** thread sleeping.
[ 641.170813] usb-storage: queuecommand called
[ 641.170822] usb-storage: *** thread awakened.
[ 641.170827] usb-storage: Command WRITE_10 (10 bytes)
[ 641.170830] usb-storage: 2a 00 00 74 31 47 00 00 10 00
[ 641.170849] usb-storage: Bulk Command S 0x43425355 T 0xc02 L 8192 F 0 Trg 0 LUN 0 CL 10
[ 641.170854] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 641.171787] usb-storage: Status code 0; transferred 31/31
[ 641.171792] usb-storage: -- transfer complete
[ 641.171797] usb-storage: Bulk command transfer result=0
[ 641.171804] usb-storage: usb_stor_bulk_transfer_sglist: xfer 8192 bytes, 2 entries
[ 641.180816] usb-storage: Status code 0; transferred 8192/8192
[ 641.180820] usb-storage: -- transfer complete
[ 641.180824] usb-storage: Bulk data transfer result 0x0
[ 641.180828] usb-storage: Attempting to get CSW...
[ 641.180833] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 641.181772] usb-storage: Status code 0; transferred 13/13
[ 641.181776] usb-storage: -- transfer complete
[ 641.181780] usb-storage: Bulk status result = 0
[ 641.181786] usb-storage: Bulk Status S 0x53425355 T 0xc02 R 0 Stat 0x0
[ 641.181791] usb-storage: scsi cmd done, result=0x0
[ 641.181797] usb-storage: *** thread sleeping.
[ 641.181817] usb-storage: queuecommand called
[ 641.181826] usb-storage: *** thread awakened.
[ 641.181832] usb-storage: Command READ_10 (10 bytes)
[ 641.181835] usb-storage: 28 00 00 0c c3 9f 00 00 88 00
[ 641.181854] usb-storage: Bulk Command S 0x43425355 T 0xc03 L 69632 F 128 Trg 0 LUN 0 CL 10
[ 641.181860] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 641.182771] usb-storage: Status code 0; transferred 31/31
[ 641.182776] usb-storage: -- transfer complete
[ 641.182780] usb-storage: Bulk command transfer result=0
[ 641.182785] usb-storage: usb_stor_bulk_transfer_sglist: xfer 69632 bytes, 17 entries
[ 641.247830] usb-storage: Status code 0; transferred 69632/69632
[ 641.247835] usb-storage: -- transfer complete
[ 641.247839] usb-storage: Bulk data transfer result 0x0
[ 641.247842] usb-storage: Attempting to get CSW...
[ 641.247847] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 641.248786] usb-storage: Status code 0; transferred 13/13
[ 641.248790] usb-storage: -- transfer complete
[ 641.248794] usb-storage: Bulk status result = 0
[ 641.248800] usb-storage: Bulk Status S 0x53425355 T 0xc03 R 0 Stat 0x0
[ 641.248805] usb-storage: scsi cmd done, result=0x0
[ 641.248811] usb-storage: *** thread sleeping.
[ 641.248839] usb-storage: queuecommand called
[ 641.248849] usb-storage: *** thread awakened.
[ 641.248854] usb-storage: Command WRITE_10 (10 bytes)
[ 641.248858] usb-storage: 2a 00 00 74 31 57 00 00 08 00
[ 641.248876] usb-storage: Bulk Command S 0x43425355 T 0xc04 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 641.248882] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 641.249784] usb-storage: Status code 0; transferred 31/31
[ 641.249788] usb-storage: -- transfer complete
[ 641.249792] usb-storage: Bulk command transfer result=0
[ 641.249798] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 641.254784] usb-storage: Status code 0; transferred 4096/4096
[ 641.254788] usb-storage: -- transfer complete
[ 641.254792] usb-storage: Bulk data transfer result 0x0
[ 641.254796] usb-storage: Attempting to get CSW...
[ 641.254801] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 641.255789] usb-storage: Status code 0; transferred 13/13
[ 641.255796] usb-storage: -- transfer complete
[ 641.255801] usb-storage: Bulk status result = 0
[ 641.255808] usb-storage: Bulk Status S 0x53425355 T 0xc04 R 0 Stat 0x0
[ 641.255815] usb-storage: scsi cmd done, result=0x0
[ 641.255824] usb-storage: *** thread sleeping.
[ 641.255853] usb-storage: queuecommand called
[ 641.255868] usb-storage: *** thread awakened.
[ 641.255875] usb-storage: Command READ_10 (10 bytes)
[ 641.255879] usb-storage: 28 00 00 0c c0 cf 00 00 40 00
[ 641.255902] usb-storage: Bulk Command S 0x43425355 T 0xc05 L 32768 F 128 Trg 0 LUN 0 CL 10
[ 641.255910] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 641.256807] usb-storage: Status code 0; transferred 31/31
[ 641.256813] usb-storage: -- transfer complete
[ 641.256819] usb-storage: Bulk command transfer result=0
[ 641.256826] usb-storage: usb_stor_bulk_transfer_sglist: xfer 32768 bytes, 8 entries
[ 641.287806] usb-storage: Status code 0; transferred 32768/32768
[ 641.287811] usb-storage: -- transfer complete
[ 641.287815] usb-storage: Bulk data transfer result 0x0
[ 641.287819] usb-storage: Attempting to get CSW...
[ 641.287824] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 641.288782] usb-storage: Status code 0; transferred 13/13
[ 641.288788] usb-storage: -- transfer complete
[ 641.288792] usb-storage: Bulk status result = 0
[ 641.288798] usb-storage: Bulk Status S 0x53425355 T 0xc05 R 0 Stat 0x0
[ 641.288803] usb-storage: scsi cmd done, result=0x0
[ 641.288810] usb-storage: *** thread sleeping.
[ 641.288843] usb-storage: queuecommand called
[ 641.288853] usb-storage: *** thread awakened.
[ 641.288859] usb-storage: Command READ_10 (10 bytes)
[ 641.288862] usb-storage: 28 00 00 0c c1 17 00 00 a0 00
[ 641.288881] usb-storage: Bulk Command S 0x43425355 T 0xc06 L 81920 F 128 Trg 0 LUN 0 CL 10
[ 641.288887] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 641.289782] usb-storage: Status code 0; transferred 31/31
[ 641.289787] usb-storage: -- transfer complete
[ 641.289791] usb-storage: Bulk command transfer result=0
[ 641.289796] usb-storage: usb_stor_bulk_transfer_sglist: xfer 81920 bytes, 20 entries
[ 641.366820] usb-storage: Status code 0; transferred 81920/81920
[ 641.366826] usb-storage: -- transfer complete
[ 641.366831] usb-storage: Bulk data transfer result 0x0
[ 641.366835] usb-storage: Attempting to get CSW...
[ 641.366840] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 641.367779] usb-storage: Status code 0; transferred 13/13
[ 641.367784] usb-storage: -- transfer complete
[ 641.367788] usb-storage: Bulk status result = 0
[ 641.367793] usb-storage: Bulk Status S 0x53425355 T 0xc06 R 0 Stat 0x0
[ 641.367798] usb-storage: scsi cmd done, result=0x0
[ 641.367805] usb-storage: *** thread sleeping.
[ 641.367839] usb-storage: queuecommand called
[ 641.367856] usb-storage: *** thread awakened.
[ 641.367862] usb-storage: Command READ_10 (10 bytes)
[ 641.367865] usb-storage: 28 00 00 0c c1 b7 00 00 f0 00
[ 641.367884] usb-storage: Bulk Command S 0x43425355 T 0xc07 L 122880 F 128 Trg 0 LUN 0 CL 10
[ 641.367890] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 641.368788] usb-storage: Status code 0; transferred 31/31
[ 641.368792] usb-storage: -- transfer complete
[ 641.368796] usb-storage: Bulk command transfer result=0
[ 641.368802] usb-storage: usb_stor_bulk_transfer_sglist: xfer 122880 bytes, 30 entries
[ 641.483799] usb-storage: Status code 0; transferred 122880/122880
[ 641.483801] usb-storage: -- transfer complete
[ 641.483804] usb-storage: Bulk data transfer result 0x0
[ 641.483806] usb-storage: Attempting to get CSW...
[ 641.483808] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 641.484771] usb-storage: Status code 0; transferred 13/13
[ 641.484773] usb-storage: -- transfer complete
[ 641.484775] usb-storage: Bulk status result = 0
[ 641.484778] usb-storage: Bulk Status S 0x53425355 T 0xc07 R 0 Stat 0x0
[ 641.484781] usb-storage: scsi cmd done, result=0x0
[ 641.484784] usb-storage: *** thread sleeping.
[ 641.484805] usb-storage: queuecommand called
[ 641.484815] usb-storage: *** thread awakened.
[ 641.484818] usb-storage: Command READ_10 (10 bytes)
[ 641.484820] usb-storage: 28 00 00 0c c2 a7 00 00 10 00
[ 641.484829] usb-storage: Bulk Command S 0x43425355 T 0xc08 L 8192 F 128 Trg 0 LUN 0 CL 10
[ 641.484832] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 641.485778] usb-storage: Status code 0; transferred 31/31
[ 641.485780] usb-storage: -- transfer complete
[ 641.485782] usb-storage: Bulk command transfer result=0
[ 641.485785] usb-storage: usb_stor_bulk_transfer_sglist: xfer 8192 bytes, 2 entries
[ 641.493807] usb-storage: Status code 0; transferred 8192/8192
[ 641.493813] usb-storage: -- transfer complete
[ 641.493817] usb-storage: Bulk data transfer result 0x0
[ 641.493820] usb-storage: Attempting to get CSW...
[ 641.493826] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 641.494787] usb-storage: Status code 0; transferred 13/13
[ 641.494792] usb-storage: -- transfer complete
[ 641.494796] usb-storage: Bulk status result = 0
[ 641.494801] usb-storage: Bulk Status S 0x53425355 T 0xc08 R 0 Stat 0x0
[ 641.494807] usb-storage: scsi cmd done, result=0x0
[ 641.494814] usb-storage: *** thread sleeping.
[ 641.494834] usb-storage: queuecommand called
[ 641.494844] usb-storage: *** thread awakened.
[ 641.494849] usb-storage: Command READ_10 (10 bytes)
[ 641.494852] usb-storage: 28 00 00 0c c2 ef 00 00 b0 00
[ 641.494871] usb-storage: Bulk Command S 0x43425355 T 0xc09 L 90112 F 128 Trg 0 LUN 0 CL 10
[ 641.494878] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 641.495787] usb-storage: Status code 0; transferred 31/31
[ 641.495793] usb-storage: -- transfer complete
[ 641.495797] usb-storage: Bulk command transfer result=0
[ 641.495802] usb-storage: usb_stor_bulk_transfer_sglist: xfer 90112 bytes, 14 entries
[ 641.579789] usb-storage: Status code 0; transferred 90112/90112
[ 641.579791] usb-storage: -- transfer complete
[ 641.579794] usb-storage: Bulk data transfer result 0x0
[ 641.579795] usb-storage: Attempting to get CSW...
[ 641.579798] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 641.580778] usb-storage: Status code 0; transferred 13/13
[ 641.580780] usb-storage: -- transfer complete
[ 641.580782] usb-storage: Bulk status result = 0
[ 641.580785] usb-storage: Bulk Status S 0x53425355 T 0xc09 R 0 Stat 0x0
[ 641.580788] usb-storage: scsi cmd done, result=0x0
[ 641.580792] usb-storage: *** thread sleeping.
[ 641.581035] usb-storage: queuecommand called
[ 641.581057] usb-storage: *** thread awakened.
[ 641.581060] usb-storage: Command READ_10 (10 bytes)
[ 641.581061] usb-storage: 28 00 00 0c c2 b7 00 00 38 00
[ 641.581071] usb-storage: Bulk Command S 0x43425355 T 0xc0a L 28672 F 128 Trg 0 LUN 0 CL 10
[ 641.581074] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 641.581769] usb-storage: Status code 0; transferred 31/31
[ 641.581771] usb-storage: -- transfer complete
[ 641.581773] usb-storage: Bulk command transfer result=0
[ 641.581775] usb-storage: usb_stor_bulk_transfer_sglist: xfer 28672 bytes, 5 entries
[ 641.608800] usb-storage: Status code 0; transferred 28672/28672
[ 641.608804] usb-storage: -- transfer complete
[ 641.608809] usb-storage: Bulk data transfer result 0x0
[ 641.608813] usb-storage: Attempting to get CSW...
[ 641.608818] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 641.609775] usb-storage: Status code 0; transferred 13/13
[ 641.609780] usb-storage: -- transfer complete
[ 641.609785] usb-storage: Bulk status result = 0
[ 641.609790] usb-storage: Bulk Status S 0x53425355 T 0xc0a R 0 Stat 0x0
[ 641.609796] usb-storage: scsi cmd done, result=0x0
[ 641.609803] usb-storage: *** thread sleeping.
[ 641.612554] usb-storage: queuecommand called
[ 641.612573] usb-storage: *** thread awakened.
[ 641.612579] usb-storage: Command READ_10 (10 bytes)
[ 641.612585] usb-storage: 28 00 00 28 c1 ff 00 00 08 00
[ 641.612605] usb-storage: Bulk Command S 0x43425355 T 0xc0b L 4096 F 128 Trg 0 LUN 0 CL 10
[ 641.612614] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 641.613121] usb-storage: Status code 0; transferred 31/31
[ 641.613128] usb-storage: -- transfer complete
[ 641.613132] usb-storage: Bulk command transfer result=0
[ 641.613138] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 641.812805] usb-storage: Status code 0; transferred 4096/4096
[ 641.812810] usb-storage: -- transfer complete
[ 641.812814] usb-storage: Bulk data transfer result 0x0
[ 641.812818] usb-storage: Attempting to get CSW...
[ 641.812823] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 641.813782] usb-storage: Status code 0; transferred 13/13
[ 641.813787] usb-storage: -- transfer complete
[ 641.813791] usb-storage: Bulk status result = 0
[ 641.813797] usb-storage: Bulk Status S 0x53425355 T 0xc0b R 0 Stat 0x0
[ 641.813802] usb-storage: scsi cmd done, result=0x0
[ 641.813809] usb-storage: *** thread sleeping.
[ 641.813923] usb-storage: queuecommand called
[ 641.813952] usb-storage: *** thread awakened.
[ 641.813958] usb-storage: Command READ_10 (10 bytes)
[ 641.813961] usb-storage: 28 00 00 28 c2 2f 00 00 08 00
[ 641.813980] usb-storage: Bulk Command S 0x43425355 T 0xc0c L 4096 F 128 Trg 0 LUN 0 CL 10
[ 641.813986] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 641.814790] usb-storage: Status code 0; transferred 31/31
[ 641.814794] usb-storage: -- transfer complete
[ 641.814798] usb-storage: Bulk command transfer result=0
[ 641.814804] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 641.818785] usb-storage: Status code 0; transferred 4096/4096
[ 641.818789] usb-storage: -- transfer complete
[ 641.818793] usb-storage: Bulk data transfer result 0x0
[ 641.818797] usb-storage: Attempting to get CSW...
[ 641.818801] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 641.819786] usb-storage: Status code 0; transferred 13/13
[ 641.819790] usb-storage: -- transfer complete
[ 641.819794] usb-storage: Bulk status result = 0
[ 641.819799] usb-storage: Bulk Status S 0x53425355 T 0xc0c R 0 Stat 0x0
[ 641.819804] usb-storage: scsi cmd done, result=0x0
[ 641.819811] usb-storage: *** thread sleeping.
[ 641.820136] usb-storage: queuecommand called
[ 641.820148] usb-storage: *** thread awakened.
[ 641.820154] usb-storage: Command READ_10 (10 bytes)
[ 641.820158] usb-storage: 28 00 00 b4 c8 77 00 00 08 00
[ 641.820178] usb-storage: Bulk Command S 0x43425355 T 0xc0d L 4096 F 128 Trg 0 LUN 0 CL 10
[ 641.820186] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 641.820781] usb-storage: Status code 0; transferred 31/31
[ 641.820785] usb-storage: -- transfer complete
[ 641.820790] usb-storage: Bulk command transfer result=0
[ 641.820796] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 641.825802] usb-storage: Status code 0; transferred 4096/4096
[ 641.825807] usb-storage: -- transfer complete
[ 641.825812] usb-storage: Bulk data transfer result 0x0
[ 641.825816] usb-storage: Attempting to get CSW...
[ 641.825821] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 641.826789] usb-storage: Status code 0; transferred 13/13
[ 641.826794] usb-storage: -- transfer complete
[ 641.826798] usb-storage: Bulk status result = 0
[ 641.826804] usb-storage: Bulk Status S 0x53425355 T 0xc0d R 0 Stat 0x0
[ 641.826810] usb-storage: scsi cmd done, result=0x0
[ 641.826817] usb-storage: *** thread sleeping.
[ 641.827377] usb-storage: queuecommand called
[ 641.827393] usb-storage: *** thread awakened.
[ 641.827399] usb-storage: Command READ_10 (10 bytes)
[ 641.827403] usb-storage: 28 00 00 0c c4 27 00 00 18 00
[ 641.827423] usb-storage: Bulk Command S 0x43425355 T 0xc0e L 12288 F 128 Trg 0 LUN 0 CL 10
[ 641.827431] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 641.827793] usb-storage: Status code 0; transferred 31/31
[ 641.827797] usb-storage: -- transfer complete
[ 641.827802] usb-storage: Bulk command transfer result=0
[ 641.827808] usb-storage: usb_stor_bulk_transfer_sglist: xfer 12288 bytes, 3 entries
[ 641.839786] usb-storage: Status code 0; transferred 12288/12288
[ 641.839790] usb-storage: -- transfer complete
[ 641.839792] usb-storage: Bulk data transfer result 0x0
[ 641.839794] usb-storage: Attempting to get CSW...
[ 641.839797] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 641.840775] usb-storage: Status code 0; transferred 13/13
[ 641.840778] usb-storage: -- transfer complete
[ 641.840780] usb-storage: Bulk status result = 0
[ 641.840783] usb-storage: Bulk Status S 0x53425355 T 0xc0e R 0 Stat 0x0
[ 641.840786] usb-storage: scsi cmd done, result=0x0
[ 641.840791] usb-storage: *** thread sleeping.
[ 641.845783] usb-storage: queuecommand called
[ 641.845801] usb-storage: *** thread awakened.
[ 641.845805] usb-storage: Command READ_10 (10 bytes)
[ 641.845807] usb-storage: 28 00 00 28 c2 07 00 00 08 00
[ 641.845818] usb-storage: Bulk Command S 0x43425355 T 0xc0f L 4096 F 128 Trg 0 LUN 0 CL 10
[ 641.845821] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 641.846783] usb-storage: Status code 0; transferred 31/31
[ 641.846785] usb-storage: -- transfer complete
[ 641.846788] usb-storage: Bulk command transfer result=0
[ 641.846791] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 641.850770] usb-storage: Status code 0; transferred 4096/4096
[ 641.850772] usb-storage: -- transfer complete
[ 641.850774] usb-storage: Bulk data transfer result 0x0
[ 641.850776] usb-storage: Attempting to get CSW...
[ 641.850779] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 641.851769] usb-storage: Status code 0; transferred 13/13
[ 641.851772] usb-storage: -- transfer complete
[ 641.851774] usb-storage: Bulk status result = 0
[ 641.851776] usb-storage: Bulk Status S 0x53425355 T 0xc0f R 0 Stat 0x0
[ 641.851779] usb-storage: scsi cmd done, result=0x0
[ 641.851784] usb-storage: *** thread sleeping.
[ 641.852429] usb-storage: queuecommand called
[ 641.852438] usb-storage: *** thread awakened.
[ 641.852441] usb-storage: Command READ_10 (10 bytes)
[ 641.852443] usb-storage: 28 00 00 28 c2 0f 00 00 08 00
[ 641.852453] usb-storage: Bulk Command S 0x43425355 T 0xc10 L 4096 F 128 Trg 0 LUN 0 CL 10
[ 641.852457] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 641.852768] usb-storage: Status code 0; transferred 31/31
[ 641.852770] usb-storage: -- transfer complete
[ 641.852772] usb-storage: Bulk command transfer result=0
[ 641.852775] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 641.856776] usb-storage: Status code 0; transferred 4096/4096
[ 641.856778] usb-storage: -- transfer complete
[ 641.856780] usb-storage: Bulk data transfer result 0x0
[ 641.856782] usb-storage: Attempting to get CSW...
[ 641.856785] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 641.857756] usb-storage: Status code 0; transferred 13/13
[ 641.857758] usb-storage: -- transfer complete
[ 641.857760] usb-storage: Bulk status result = 0
[ 641.857763] usb-storage: Bulk Status S 0x53425355 T 0xc10 R 0 Stat 0x0
[ 641.857765] usb-storage: scsi cmd done, result=0x0
[ 641.857769] usb-storage: *** thread sleeping.
[ 642.869920] usb-storage: queuecommand called
[ 642.869964] usb-storage: *** thread awakened.
[ 642.869973] usb-storage: Command READ_10 (10 bytes)
[ 642.869977] usb-storage: 28 00 00 28 c2 17 00 00 08 00
[ 642.869998] usb-storage: Bulk Command S 0x43425355 T 0xc11 L 4096 F 128 Trg 0 LUN 0 CL 10
[ 642.870049] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 642.871801] usb-storage: Status code 0; transferred 31/31
[ 642.871805] usb-storage: -- transfer complete
[ 642.871810] usb-storage: Bulk command transfer result=0
[ 642.871816] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 642.875788] usb-storage: Status code 0; transferred 4096/4096
[ 642.875793] usb-storage: -- transfer complete
[ 642.875798] usb-storage: Bulk data transfer result 0x0
[ 642.875801] usb-storage: Attempting to get CSW...
[ 642.875806] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 642.876787] usb-storage: Status code 0; transferred 13/13
[ 642.876791] usb-storage: -- transfer complete
[ 642.876795] usb-storage: Bulk status result = 0
[ 642.876801] usb-storage: Bulk Status S 0x53425355 T 0xc11 R 0 Stat 0x0
[ 642.876806] usb-storage: scsi cmd done, result=0x0
[ 642.876814] usb-storage: *** thread sleeping.
[ 642.878065] usb-storage: queuecommand called
[ 642.878083] usb-storage: *** thread awakened.
[ 642.878089] usb-storage: Command READ_10 (10 bytes)
[ 642.878093] usb-storage: 28 00 00 28 c2 1f 00 00 08 00
[ 642.878112] usb-storage: Bulk Command S 0x43425355 T 0xc12 L 4096 F 128 Trg 0 LUN 0 CL 10
[ 642.878119] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 642.878774] usb-storage: Status code 0; transferred 31/31
[ 642.878779] usb-storage: -- transfer complete
[ 642.878783] usb-storage: Bulk command transfer result=0
[ 642.878789] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 642.882803] usb-storage: Status code 0; transferred 4096/4096
[ 642.882809] usb-storage: -- transfer complete
[ 642.882815] usb-storage: Bulk data transfer result 0x0
[ 642.882820] usb-storage: Attempting to get CSW...
[ 642.882826] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 642.883785] usb-storage: Status code 0; transferred 13/13
[ 642.883790] usb-storage: -- transfer complete
[ 642.883795] usb-storage: Bulk status result = 0
[ 642.883801] usb-storage: Bulk Status S 0x53425355 T 0xc12 R 0 Stat 0x0
[ 642.883808] usb-storage: scsi cmd done, result=0x0
[ 642.883816] usb-storage: *** thread sleeping.
[ 642.888343] usb-storage: queuecommand called
[ 642.888716] usb-storage: *** thread awakened.
[ 642.888723] usb-storage: Command READ_10 (10 bytes)
[ 642.888727] usb-storage: 28 00 00 28 c4 17 00 00 08 00
[ 642.888747] usb-storage: Bulk Command S 0x43425355 T 0xc13 L 4096 F 128 Trg 0 LUN 0 CL 10
[ 642.888753] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 642.889779] usb-storage: Status code 0; transferred 31/31
[ 642.889784] usb-storage: -- transfer complete
[ 642.889788] usb-storage: Bulk command transfer result=0
[ 642.889794] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 642.893802] usb-storage: Status code 0; transferred 4096/4096
[ 642.893807] usb-storage: -- transfer complete
[ 642.893812] usb-storage: Bulk data transfer result 0x0
[ 642.893816] usb-storage: Attempting to get CSW...
[ 642.893821] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 642.894787] usb-storage: Status code 0; transferred 13/13
[ 642.894791] usb-storage: -- transfer complete
[ 642.894795] usb-storage: Bulk status result = 0
[ 642.894801] usb-storage: Bulk Status S 0x53425355 T 0xc13 R 0 Stat 0x0
[ 642.894806] usb-storage: scsi cmd done, result=0x0
[ 642.894814] usb-storage: *** thread sleeping.
[ 642.895913] usb-storage: queuecommand called
[ 642.895928] usb-storage: *** thread awakened.
[ 642.895933] usb-storage: Command READ_10 (10 bytes)
[ 642.895937] usb-storage: 28 00 00 28 c2 27 00 00 08 00
[ 642.895956] usb-storage: Bulk Command S 0x43425355 T 0xc14 L 4096 F 128 Trg 0 LUN 0 CL 10
[ 642.895963] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 642.896787] usb-storage: Status code 0; transferred 31/31
[ 642.896791] usb-storage: -- transfer complete
[ 642.896796] usb-storage: Bulk command transfer result=0
[ 642.896801] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 642.900787] usb-storage: Status code 0; transferred 4096/4096
[ 642.900791] usb-storage: -- transfer complete
[ 642.900795] usb-storage: Bulk data transfer result 0x0
[ 642.900799] usb-storage: Attempting to get CSW...
[ 642.900803] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 642.901773] usb-storage: Status code 0; transferred 13/13
[ 642.901778] usb-storage: -- transfer complete
[ 642.901783] usb-storage: Bulk status result = 0
[ 642.901788] usb-storage: Bulk Status S 0x53425355 T 0xc14 R 0 Stat 0x0
[ 642.901794] usb-storage: scsi cmd done, result=0x0
[ 642.901801] usb-storage: *** thread sleeping.
[ 645.000143] usb-storage: queuecommand called
[ 645.000182] usb-storage: *** thread awakened.
[ 645.000189] usb-storage: Command WRITE_10 (10 bytes)
[ 645.000193] usb-storage: 2a 00 00 c4 0f 5f 00 00 10 00
[ 645.000213] usb-storage: Bulk Command S 0x43425355 T 0xc15 L 8192 F 0 Trg 0 LUN 0 CL 10
[ 645.000220] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 645.001790] usb-storage: Status code 0; transferred 31/31
[ 645.001795] usb-storage: -- transfer complete
[ 645.001800] usb-storage: Bulk command transfer result=0
[ 645.001806] usb-storage: usb_stor_bulk_transfer_sglist: xfer 8192 bytes, 2 entries
[ 645.178814] usb-storage: Status code 0; transferred 8192/8192
[ 645.178819] usb-storage: -- transfer complete
[ 645.178823] usb-storage: Bulk data transfer result 0x0
[ 645.178827] usb-storage: Attempting to get CSW...
[ 645.178833] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 645.180774] usb-storage: Status code 0; transferred 13/13
[ 645.180778] usb-storage: -- transfer complete
[ 645.180782] usb-storage: Bulk status result = 0
[ 645.180787] usb-storage: Bulk Status S 0x53425355 T 0xc15 R 0 Stat 0x0
[ 645.180793] usb-storage: scsi cmd done, result=0x0
[ 645.180800] usb-storage: *** thread sleeping.
[ 645.180836] usb-storage: queuecommand called
[ 645.180851] usb-storage: *** thread awakened.
[ 645.180857] usb-storage: Command WRITE_10 (10 bytes)
[ 645.180861] usb-storage: 2a 00 00 c4 0f e7 00 00 08 00
[ 645.180880] usb-storage: Bulk Command S 0x43425355 T 0xc16 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 645.180886] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 645.181793] usb-storage: Status code 0; transferred 31/31
[ 645.181797] usb-storage: -- transfer complete
[ 645.181801] usb-storage: Bulk command transfer result=0
[ 645.181806] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 645.213789] usb-storage: Status code 0; transferred 4096/4096
[ 645.213791] usb-storage: -- transfer complete
[ 645.213794] usb-storage: Bulk data transfer result 0x0
[ 645.213796] usb-storage: Attempting to get CSW...
[ 645.213798] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 645.217769] usb-storage: Status code 0; transferred 13/13
[ 645.217771] usb-storage: -- transfer complete
[ 645.217773] usb-storage: Bulk status result = 0
[ 645.217776] usb-storage: Bulk Status S 0x53425355 T 0xc16 R 0 Stat 0x0
[ 645.217779] usb-storage: scsi cmd done, result=0x0
[ 645.217783] usb-storage: *** thread sleeping.
[ 645.217799] usb-storage: queuecommand called
[ 645.217807] usb-storage: *** thread awakened.
[ 645.217810] usb-storage: Command WRITE_10 (10 bytes)
[ 645.217812] usb-storage: 2a 00 00 c5 80 3f 00 00 08 00
[ 645.217821] usb-storage: Bulk Command S 0x43425355 T 0xc17 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 645.217824] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 645.218766] usb-storage: Status code 0; transferred 31/31
[ 645.218768] usb-storage: -- transfer complete
[ 645.218770] usb-storage: Bulk command transfer result=0
[ 645.218773] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 645.223794] usb-storage: Status code 0; transferred 4096/4096
[ 645.223799] usb-storage: -- transfer complete
[ 645.223803] usb-storage: Bulk data transfer result 0x0
[ 645.223807] usb-storage: Attempting to get CSW...
[ 645.223812] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 645.224775] usb-storage: Status code 0; transferred 13/13
[ 645.224780] usb-storage: -- transfer complete
[ 645.224784] usb-storage: Bulk status result = 0
[ 645.224790] usb-storage: Bulk Status S 0x53425355 T 0xc17 R 0 Stat 0x0
[ 645.224795] usb-storage: scsi cmd done, result=0x0
[ 645.224802] usb-storage: *** thread sleeping.
[ 645.224826] usb-storage: queuecommand called
[ 645.224837] usb-storage: *** thread awakened.
[ 645.224842] usb-storage: Command WRITE_10 (10 bytes)
[ 645.224846] usb-storage: 2a 00 00 b4 01 07 00 00 08 00
[ 645.224864] usb-storage: Bulk Command S 0x43425355 T 0xc18 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 645.224870] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 645.225787] usb-storage: Status code 0; transferred 31/31
[ 645.225791] usb-storage: -- transfer complete
[ 645.225795] usb-storage: Bulk command transfer result=0
[ 645.225801] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 645.460781] usb-storage: Status code 0; transferred 4096/4096
[ 645.460784] usb-storage: -- transfer complete
[ 645.460786] usb-storage: Bulk data transfer result 0x0
[ 645.460788] usb-storage: Attempting to get CSW...
[ 645.460790] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 645.483786] usb-storage: Status code 0; transferred 13/13
[ 645.483789] usb-storage: -- transfer complete
[ 645.483791] usb-storage: Bulk status result = 0
[ 645.483794] usb-storage: Bulk Status S 0x53425355 T 0xc18 R 0 Stat 0x0
[ 645.483797] usb-storage: scsi cmd done, result=0x0
[ 645.483800] usb-storage: *** thread sleeping.
[ 649.749553] usb-storage: queuecommand called
[ 649.749567] usb-storage: *** thread awakened.
[ 649.749573] usb-storage: Command WRITE_10 (10 bytes)
[ 649.749577] usb-storage: 2a 00 00 74 31 5f 00 00 58 00
[ 649.749596] usb-storage: Bulk Command S 0x43425355 T 0xc19 L 45056 F 0 Trg 0 LUN 0 CL 10
[ 649.749603] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 649.750792] usb-storage: Status code 0; transferred 31/31
[ 649.750797] usb-storage: -- transfer complete
[ 649.750802] usb-storage: Bulk command transfer result=0
[ 649.750808] usb-storage: usb_stor_bulk_transfer_sglist: xfer 45056 bytes, 11 entries
[ 649.860807] usb-storage: Status code 0; transferred 45056/45056
[ 649.860813] usb-storage: -- transfer complete
[ 649.860817] usb-storage: Bulk data transfer result 0x0
[ 649.860821] usb-storage: Attempting to get CSW...
[ 649.860826] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 649.862776] usb-storage: Status code 0; transferred 13/13
[ 649.862780] usb-storage: -- transfer complete
[ 649.862784] usb-storage: Bulk status result = 0
[ 649.862789] usb-storage: Bulk Status S 0x53425355 T 0xc19 R 0 Stat 0x0
[ 649.862795] usb-storage: scsi cmd done, result=0x0
[ 649.862801] usb-storage: *** thread sleeping.
[ 649.862898] usb-storage: queuecommand called
[ 649.862910] usb-storage: *** thread awakened.
[ 649.862915] usb-storage: Command WRITE_10 (10 bytes)
[ 649.862919] usb-storage: 2a 00 00 74 31 b7 00 00 08 00
[ 649.862938] usb-storage: Bulk Command S 0x43425355 T 0xc1a L 4096 F 0 Trg 0 LUN 0 CL 10
[ 649.862944] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 649.863790] usb-storage: Status code 0; transferred 31/31
[ 649.863794] usb-storage: -- transfer complete
[ 649.863798] usb-storage: Bulk command transfer result=0
[ 649.863804] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 649.868784] usb-storage: Status code 0; transferred 4096/4096
[ 649.868789] usb-storage: -- transfer complete
[ 649.868793] usb-storage: Bulk data transfer result 0x0
[ 649.868797] usb-storage: Attempting to get CSW...
[ 649.868802] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 649.870793] usb-storage: Status code 0; transferred 13/13
[ 649.870800] usb-storage: -- transfer complete
[ 649.870804] usb-storage: Bulk status result = 0
[ 649.870810] usb-storage: Bulk Status S 0x53425355 T 0xc1a R 0 Stat 0x0
[ 649.870815] usb-storage: scsi cmd done, result=0x0
[ 649.870823] usb-storage: *** thread sleeping.
[ 655.040138] usb-storage: queuecommand called
[ 655.040169] usb-storage: *** thread awakened.
[ 655.040177] usb-storage: Command WRITE_10 (10 bytes)
[ 655.040181] usb-storage: 2a 00 00 74 31 bf 00 00 48 00
[ 655.040201] usb-storage: Bulk Command S 0x43425355 T 0xc1b L 36864 F 0 Trg 0 LUN 0 CL 10
[ 655.040207] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 655.041776] usb-storage: Status code 0; transferred 31/31
[ 655.041780] usb-storage: -- transfer complete
[ 655.041784] usb-storage: Bulk command transfer result=0
[ 655.041790] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 655.150822] usb-storage: Status code 0; transferred 36864/36864
[ 655.150827] usb-storage: -- transfer complete
[ 655.150831] usb-storage: Bulk data transfer result 0x0
[ 655.150835] usb-storage: Attempting to get CSW...
[ 655.150840] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 655.155776] usb-storage: Status code 0; transferred 13/13
[ 655.155780] usb-storage: -- transfer complete
[ 655.155784] usb-storage: Bulk status result = 0
[ 655.155789] usb-storage: Bulk Status S 0x53425355 T 0xc1b R 0 Stat 0x0
[ 655.155795] usb-storage: scsi cmd done, result=0x0
[ 655.155802] usb-storage: *** thread sleeping.
[ 655.155899] usb-storage: queuecommand called
[ 655.155929] usb-storage: *** thread awakened.
[ 655.155935] usb-storage: Command WRITE_10 (10 bytes)
[ 655.155938] usb-storage: 2a 00 00 74 32 07 00 00 08 00
[ 655.155957] usb-storage: Bulk Command S 0x43425355 T 0xc1c L 4096 F 0 Trg 0 LUN 0 CL 10
[ 655.155963] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 655.156790] usb-storage: Status code 0; transferred 31/31
[ 655.156794] usb-storage: -- transfer complete
[ 655.156798] usb-storage: Bulk command transfer result=0
[ 655.156803] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 655.163814] usb-storage: Status code 0; transferred 4096/4096
[ 655.163820] usb-storage: -- transfer complete
[ 655.163824] usb-storage: Bulk data transfer result 0x0
[ 655.163828] usb-storage: Attempting to get CSW...
[ 655.163834] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 655.165810] usb-storage: Status code 0; transferred 13/13
[ 655.165814] usb-storage: -- transfer complete
[ 655.165820] usb-storage: Bulk status result = 0
[ 655.165825] usb-storage: Bulk Status S 0x53425355 T 0xc1c R 0 Stat 0x0
[ 655.165832] usb-storage: scsi cmd done, result=0x0
[ 655.165839] usb-storage: *** thread sleeping.
[ 660.010043] usb-storage: queuecommand called
[ 660.010059] usb-storage: *** thread awakened.
[ 660.010067] usb-storage: Command WRITE_10 (10 bytes)
[ 660.010071] usb-storage: 2a 00 00 b9 1e 8f 00 00 a8 00
[ 660.010090] usb-storage: Bulk Command S 0x43425355 T 0xc1d L 86016 F 0 Trg 0 LUN 0 CL 10
[ 660.010097] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 660.011777] usb-storage: Status code 0; transferred 31/31
[ 660.011782] usb-storage: -- transfer complete
[ 660.011786] usb-storage: Bulk command transfer result=0
[ 660.011792] usb-storage: usb_stor_bulk_transfer_sglist: xfer 86016 bytes, 21 entries
[ 660.218813] usb-storage: Status code 0; transferred 86016/86016
[ 660.218818] usb-storage: -- transfer complete
[ 660.218823] usb-storage: Bulk data transfer result 0x0
[ 660.218827] usb-storage: Attempting to get CSW...
[ 660.218832] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 660.243786] usb-storage: Status code 0; transferred 13/13
[ 660.243791] usb-storage: -- transfer complete
[ 660.243796] usb-storage: Bulk status result = 0
[ 660.243802] usb-storage: Bulk Status S 0x53425355 T 0xc1d R 0 Stat 0x0
[ 660.243807] usb-storage: scsi cmd done, result=0x0
[ 660.243815] usb-storage: *** thread sleeping.
[ 660.243877] usb-storage: queuecommand called
[ 660.243888] usb-storage: *** thread awakened.
[ 660.243893] usb-storage: Command WRITE_10 (10 bytes)
[ 660.243897] usb-storage: 2a 00 00 74 32 0f 00 00 50 00
[ 660.243916] usb-storage: Bulk Command S 0x43425355 T 0xc1e L 40960 F 0 Trg 0 LUN 0 CL 10
[ 660.243922] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 660.244785] usb-storage: Status code 0; transferred 31/31
[ 660.244790] usb-storage: -- transfer complete
[ 660.244795] usb-storage: Bulk command transfer result=0
[ 660.244801] usb-storage: usb_stor_bulk_transfer_sglist: xfer 40960 bytes, 10 entries
[ 660.447825] usb-storage: Status code 0; transferred 40960/40960
[ 660.447830] usb-storage: -- transfer complete
[ 660.447835] usb-storage: Bulk data transfer result 0x0
[ 660.447839] usb-storage: Attempting to get CSW...
[ 660.447844] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 660.472782] usb-storage: Status code 0; transferred 13/13
[ 660.472786] usb-storage: -- transfer complete
[ 660.472790] usb-storage: Bulk status result = 0
[ 660.472796] usb-storage: Bulk Status S 0x53425355 T 0xc1e R 0 Stat 0x0
[ 660.472801] usb-storage: scsi cmd done, result=0x0
[ 660.472807] usb-storage: *** thread sleeping.
[ 660.472896] usb-storage: queuecommand called
[ 660.472908] usb-storage: *** thread awakened.
[ 660.472914] usb-storage: Command WRITE_10 (10 bytes)
[ 660.472918] usb-storage: 2a 00 00 74 32 5f 00 00 08 00
[ 660.472937] usb-storage: Bulk Command S 0x43425355 T 0xc1f L 4096 F 0 Trg 0 LUN 0 CL 10
[ 660.472943] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 660.473793] usb-storage: Status code 0; transferred 31/31
[ 660.473797] usb-storage: -- transfer complete
[ 660.473801] usb-storage: Bulk command transfer result=0
[ 660.473807] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 660.478793] usb-storage: Status code 0; transferred 4096/4096
[ 660.478798] usb-storage: -- transfer complete
[ 660.478802] usb-storage: Bulk data transfer result 0x0
[ 660.478805] usb-storage: Attempting to get CSW...
[ 660.478810] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 660.480775] usb-storage: Status code 0; transferred 13/13
[ 660.480779] usb-storage: -- transfer complete
[ 660.480783] usb-storage: Bulk status result = 0
[ 660.480788] usb-storage: Bulk Status S 0x53425355 T 0xc1f R 0 Stat 0x0
[ 660.480794] usb-storage: scsi cmd done, result=0x0
[ 660.480800] usb-storage: *** thread sleeping.
[ 670.010047] usb-storage: queuecommand called
[ 670.010080] usb-storage: *** thread awakened.
[ 670.010088] usb-storage: Command WRITE_10 (10 bytes)
[ 670.010093] usb-storage: 2a 00 00 b8 ff c7 00 00 78 00
[ 670.010113] usb-storage: Bulk Command S 0x43425355 T 0xc20 L 61440 F 0 Trg 0 LUN 0 CL 10
[ 670.010120] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 670.011794] usb-storage: Status code 0; transferred 31/31
[ 670.011799] usb-storage: -- transfer complete
[ 670.011803] usb-storage: Bulk command transfer result=0
[ 670.011809] usb-storage: usb_stor_bulk_transfer_sglist: xfer 61440 bytes, 15 entries
[ 670.252835] usb-storage: Status code 0; transferred 61440/61440
[ 670.252840] usb-storage: -- transfer complete
[ 670.252845] usb-storage: Bulk data transfer result 0x0
[ 670.252849] usb-storage: Attempting to get CSW...
[ 670.252854] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 670.277786] usb-storage: Status code 0; transferred 13/13
[ 670.277791] usb-storage: -- transfer complete
[ 670.277795] usb-storage: Bulk status result = 0
[ 670.277801] usb-storage: Bulk Status S 0x53425355 T 0xc20 R 0 Stat 0x0
[ 670.277807] usb-storage: scsi cmd done, result=0x0
[ 670.277815] usb-storage: *** thread sleeping.
[ 670.277871] usb-storage: queuecommand called
[ 670.277887] usb-storage: *** thread awakened.
[ 670.277893] usb-storage: Command WRITE_10 (10 bytes)
[ 670.277896] usb-storage: 2a 00 00 b9 25 ff 00 00 a0 00
[ 670.277916] usb-storage: Bulk Command S 0x43425355 T 0xc21 L 81920 F 0 Trg 0 LUN 0 CL 10
[ 670.277921] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 670.278786] usb-storage: Status code 0; transferred 31/31
[ 670.278791] usb-storage: -- transfer complete
[ 670.278795] usb-storage: Bulk command transfer result=0
[ 670.278801] usb-storage: usb_stor_bulk_transfer_sglist: xfer 81920 bytes, 20 entries
[ 670.624814] usb-storage: Status code 0; transferred 81920/81920
[ 670.624818] usb-storage: -- transfer complete
[ 670.624823] usb-storage: Bulk data transfer result 0x0
[ 670.624826] usb-storage: Attempting to get CSW...
[ 670.624831] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 670.626776] usb-storage: Status code 0; transferred 13/13
[ 670.626780] usb-storage: -- transfer complete
[ 670.626784] usb-storage: Bulk status result = 0
[ 670.626789] usb-storage: Bulk Status S 0x53425355 T 0xc21 R 0 Stat 0x0
[ 670.626795] usb-storage: scsi cmd done, result=0x0
[ 670.626801] usb-storage: *** thread sleeping.
[ 670.626856] usb-storage: queuecommand called
[ 670.626872] usb-storage: *** thread awakened.
[ 670.626878] usb-storage: Command WRITE_10 (10 bytes)
[ 670.626881] usb-storage: 2a 00 00 b9 68 77 00 00 28 00
[ 670.626900] usb-storage: Bulk Command S 0x43425355 T 0xc22 L 20480 F 0 Trg 0 LUN 0 CL 10
[ 670.626906] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 670.627784] usb-storage: Status code 0; transferred 31/31
[ 670.627788] usb-storage: -- transfer complete
[ 670.627792] usb-storage: Bulk command transfer result=0
[ 670.627798] usb-storage: usb_stor_bulk_transfer_sglist: xfer 20480 bytes, 5 entries
[ 670.739805] usb-storage: Status code 0; transferred 20480/20480
[ 670.739810] usb-storage: -- transfer complete
[ 670.739814] usb-storage: Bulk data transfer result 0x0
[ 670.739818] usb-storage: Attempting to get CSW...
[ 670.739823] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 670.743782] usb-storage: Status code 0; transferred 13/13
[ 670.743787] usb-storage: -- transfer complete
[ 670.743791] usb-storage: Bulk status result = 0
[ 670.743796] usb-storage: Bulk Status S 0x53425355 T 0xc22 R 0 Stat 0x0
[ 670.743801] usb-storage: scsi cmd done, result=0x0
[ 670.743808] usb-storage: *** thread sleeping.
[ 670.743839] usb-storage: queuecommand called
[ 670.743849] usb-storage: *** thread awakened.
[ 670.743854] usb-storage: Command WRITE_10 (10 bytes)
[ 670.743858] usb-storage: 2a 00 00 74 32 67 00 00 48 00
[ 670.743877] usb-storage: Bulk Command S 0x43425355 T 0xc23 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 670.743883] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 670.744794] usb-storage: Status code 0; transferred 31/31
[ 670.744798] usb-storage: -- transfer complete
[ 670.744802] usb-storage: Bulk command transfer result=0
[ 670.744807] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 671.074823] usb-storage: Status code 0; transferred 36864/36864
[ 671.074828] usb-storage: -- transfer complete
[ 671.074833] usb-storage: Bulk data transfer result 0x0
[ 671.074836] usb-storage: Attempting to get CSW...
[ 671.074841] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 671.099782] usb-storage: Status code 0; transferred 13/13
[ 671.099787] usb-storage: -- transfer complete
[ 671.099791] usb-storage: Bulk status result = 0
[ 671.099796] usb-storage: Bulk Status S 0x53425355 T 0xc23 R 0 Stat 0x0
[ 671.099801] usb-storage: scsi cmd done, result=0x0
[ 671.099808] usb-storage: *** thread sleeping.
[ 671.099902] usb-storage: queuecommand called
[ 671.099914] usb-storage: *** thread awakened.
[ 671.099919] usb-storage: Command WRITE_10 (10 bytes)
[ 671.099923] usb-storage: 2a 00 00 74 32 af 00 00 08 00
[ 671.099942] usb-storage: Bulk Command S 0x43425355 T 0xc24 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 671.099948] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 671.100796] usb-storage: Status code 0; transferred 31/31
[ 671.100800] usb-storage: -- transfer complete
[ 671.100804] usb-storage: Bulk command transfer result=0
[ 671.100809] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 671.106811] usb-storage: Status code 0; transferred 4096/4096
[ 671.106815] usb-storage: -- transfer complete
[ 671.106819] usb-storage: Bulk data transfer result 0x0
[ 671.106823] usb-storage: Attempting to get CSW...
[ 671.106828] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 671.108793] usb-storage: Status code 0; transferred 13/13
[ 671.108797] usb-storage: -- transfer complete
[ 671.108801] usb-storage: Bulk status result = 0
[ 671.108807] usb-storage: Bulk Status S 0x53425355 T 0xc24 R 0 Stat 0x0
[ 671.108812] usb-storage: scsi cmd done, result=0x0
[ 671.108819] usb-storage: *** thread sleeping.
[ 675.010055] usb-storage: queuecommand called
[ 675.010077] usb-storage: *** thread awakened.
[ 675.010084] usb-storage: Command WRITE_10 (10 bytes)
[ 675.010088] usb-storage: 2a 00 00 b7 49 6f 00 00 08 00
[ 675.010106] usb-storage: Bulk Command S 0x43425355 T 0xc25 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 675.010112] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 675.011778] usb-storage: Status code 0; transferred 31/31
[ 675.011782] usb-storage: -- transfer complete
[ 675.011786] usb-storage: Bulk command transfer result=0
[ 675.011792] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 675.025826] usb-storage: Status code 0; transferred 4096/4096
[ 675.025831] usb-storage: -- transfer complete
[ 675.025835] usb-storage: Bulk data transfer result 0x0
[ 675.025839] usb-storage: Attempting to get CSW...
[ 675.025844] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 675.050785] usb-storage: Status code 0; transferred 13/13
[ 675.050790] usb-storage: -- transfer complete
[ 675.050794] usb-storage: Bulk status result = 0
[ 675.050800] usb-storage: Bulk Status S 0x53425355 T 0xc25 R 0 Stat 0x0
[ 675.050805] usb-storage: scsi cmd done, result=0x0
[ 675.050813] usb-storage: *** thread sleeping.
[ 675.050841] usb-storage: queuecommand called
[ 675.050851] usb-storage: *** thread awakened.
[ 675.050856] usb-storage: Command WRITE_10 (10 bytes)
[ 675.050860] usb-storage: 2a 00 00 74 32 b7 00 00 48 00
[ 675.050879] usb-storage: Bulk Command S 0x43425355 T 0xc26 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 675.050885] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 675.051786] usb-storage: Status code 0; transferred 31/31
[ 675.051790] usb-storage: -- transfer complete
[ 675.051794] usb-storage: Bulk command transfer result=0
[ 675.051800] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 675.404816] usb-storage: Status code 0; transferred 36864/36864
[ 675.404821] usb-storage: -- transfer complete
[ 675.404825] usb-storage: Bulk data transfer result 0x0
[ 675.404829] usb-storage: Attempting to get CSW...
[ 675.404833] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 675.406777] usb-storage: Status code 0; transferred 13/13
[ 675.406781] usb-storage: -- transfer complete
[ 675.406785] usb-storage: Bulk status result = 0
[ 675.406790] usb-storage: Bulk Status S 0x53425355 T 0xc26 R 0 Stat 0x0
[ 675.406796] usb-storage: scsi cmd done, result=0x0
[ 675.406803] usb-storage: *** thread sleeping.
[ 675.406905] usb-storage: queuecommand called
[ 675.406928] usb-storage: *** thread awakened.
[ 675.406934] usb-storage: Command WRITE_10 (10 bytes)
[ 675.406937] usb-storage: 2a 00 00 74 32 ff 00 00 08 00
[ 675.406956] usb-storage: Bulk Command S 0x43425355 T 0xc27 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 675.406962] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 675.407796] usb-storage: Status code 0; transferred 31/31
[ 675.407800] usb-storage: -- transfer complete
[ 675.407804] usb-storage: Bulk command transfer result=0
[ 675.407810] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 675.413809] usb-storage: Status code 0; transferred 4096/4096
[ 675.413815] usb-storage: -- transfer complete
[ 675.413819] usb-storage: Bulk data transfer result 0x0
[ 675.413823] usb-storage: Attempting to get CSW...
[ 675.413829] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 675.414792] usb-storage: Status code 0; transferred 13/13
[ 675.414797] usb-storage: -- transfer complete
[ 675.414801] usb-storage: Bulk status result = 0
[ 675.414806] usb-storage: Bulk Status S 0x53425355 T 0xc27 R 0 Stat 0x0
[ 675.414813] usb-storage: scsi cmd done, result=0x0
[ 675.414820] usb-storage: *** thread sleeping.
[ 680.010042] usb-storage: queuecommand called
[ 680.010073] usb-storage: *** thread awakened.
[ 680.010081] usb-storage: Command WRITE_10 (10 bytes)
[ 680.010084] usb-storage: 2a 00 00 b4 02 37 00 00 08 00
[ 680.010104] usb-storage: Bulk Command S 0x43425355 T 0xc28 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 680.010110] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 680.011795] usb-storage: Status code 0; transferred 31/31
[ 680.011800] usb-storage: -- transfer complete
[ 680.011804] usb-storage: Bulk command transfer result=0
[ 680.011810] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 680.025810] usb-storage: Status code 0; transferred 4096/4096
[ 680.025815] usb-storage: -- transfer complete
[ 680.025820] usb-storage: Bulk data transfer result 0x0
[ 680.025824] usb-storage: Attempting to get CSW...
[ 680.025829] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 680.050786] usb-storage: Status code 0; transferred 13/13
[ 680.050790] usb-storage: -- transfer complete
[ 680.050795] usb-storage: Bulk status result = 0
[ 680.050800] usb-storage: Bulk Status S 0x53425355 T 0xc28 R 0 Stat 0x0
[ 680.050806] usb-storage: scsi cmd done, result=0x0
[ 680.050813] usb-storage: *** thread sleeping.
[ 680.050842] usb-storage: queuecommand called
[ 680.050853] usb-storage: *** thread awakened.
[ 680.050858] usb-storage: Command WRITE_10 (10 bytes)
[ 680.050862] usb-storage: 2a 00 00 74 33 07 00 00 50 00
[ 680.050881] usb-storage: Bulk Command S 0x43425355 T 0xc29 L 40960 F 0 Trg 0 LUN 0 CL 10
[ 680.050887] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 680.051778] usb-storage: Status code 0; transferred 31/31
[ 680.051782] usb-storage: -- transfer complete
[ 680.051787] usb-storage: Bulk command transfer result=0
[ 680.051792] usb-storage: usb_stor_bulk_transfer_sglist: xfer 40960 bytes, 10 entries
[ 680.418813] usb-storage: Status code 0; transferred 40960/40960
[ 680.418818] usb-storage: -- transfer complete
[ 680.418823] usb-storage: Bulk data transfer result 0x0
[ 680.418827] usb-storage: Attempting to get CSW...
[ 680.418831] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 680.420798] usb-storage: Status code 0; transferred 13/13
[ 680.420803] usb-storage: -- transfer complete
[ 680.420808] usb-storage: Bulk status result = 0
[ 680.420813] usb-storage: Bulk Status S 0x53425355 T 0xc29 R 0 Stat 0x0
[ 680.420818] usb-storage: scsi cmd done, result=0x0
[ 680.420825] usb-storage: *** thread sleeping.
[ 680.420914] usb-storage: queuecommand called
[ 680.420925] usb-storage: *** thread awakened.
[ 680.420930] usb-storage: Command WRITE_10 (10 bytes)
[ 680.420934] usb-storage: 2a 00 00 74 33 57 00 00 08 00
[ 680.420953] usb-storage: Bulk Command S 0x43425355 T 0xc2a L 4096 F 0 Trg 0 LUN 0 CL 10
[ 680.420959] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 680.421794] usb-storage: Status code 0; transferred 31/31
[ 680.421799] usb-storage: -- transfer complete
[ 680.421803] usb-storage: Bulk command transfer result=0
[ 680.421808] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 680.427816] usb-storage: Status code 0; transferred 4096/4096
[ 680.427820] usb-storage: -- transfer complete
[ 680.427824] usb-storage: Bulk data transfer result 0x0
[ 680.427828] usb-storage: Attempting to get CSW...
[ 680.427833] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 680.428779] usb-storage: Status code 0; transferred 13/13
[ 680.428783] usb-storage: -- transfer complete
[ 680.428787] usb-storage: Bulk status result = 0
[ 680.428793] usb-storage: Bulk Status S 0x53425355 T 0xc2a R 0 Stat 0x0
[ 680.428798] usb-storage: scsi cmd done, result=0x0
[ 680.428805] usb-storage: *** thread sleeping.
[ 685.040152] usb-storage: queuecommand called
[ 685.040165] usb-storage: *** thread awakened.
[ 685.040171] usb-storage: Command WRITE_10 (10 bytes)
[ 685.040175] usb-storage: 2a 00 00 74 33 5f 00 00 48 00
[ 685.040194] usb-storage: Bulk Command S 0x43425355 T 0xc2b L 36864 F 0 Trg 0 LUN 0 CL 10
[ 685.040200] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 685.041795] usb-storage: Status code 0; transferred 31/31
[ 685.041800] usb-storage: -- transfer complete
[ 685.041804] usb-storage: Bulk command transfer result=0
[ 685.041811] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 685.221815] usb-storage: Status code 0; transferred 36864/36864
[ 685.221819] usb-storage: -- transfer complete
[ 685.221824] usb-storage: Bulk data transfer result 0x0
[ 685.221828] usb-storage: Attempting to get CSW...
[ 685.221833] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 685.225791] usb-storage: Status code 0; transferred 13/13
[ 685.225795] usb-storage: -- transfer complete
[ 685.225799] usb-storage: Bulk status result = 0
[ 685.225805] usb-storage: Bulk Status S 0x53425355 T 0xc2b R 0 Stat 0x0
[ 685.225810] usb-storage: scsi cmd done, result=0x0
[ 685.225817] usb-storage: *** thread sleeping.
[ 685.225904] usb-storage: queuecommand called
[ 685.225933] usb-storage: *** thread awakened.
[ 685.225939] usb-storage: Command WRITE_10 (10 bytes)
[ 685.225943] usb-storage: 2a 00 00 74 33 a7 00 00 08 00
[ 685.225962] usb-storage: Bulk Command S 0x43425355 T 0xc2c L 4096 F 0 Trg 0 LUN 0 CL 10
[ 685.225968] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 685.226807] usb-storage: Status code 0; transferred 31/31
[ 685.226811] usb-storage: -- transfer complete
[ 685.226815] usb-storage: Bulk command transfer result=0
[ 685.226821] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 685.233793] usb-storage: Status code 0; transferred 4096/4096
[ 685.233798] usb-storage: -- transfer complete
[ 685.233802] usb-storage: Bulk data transfer result 0x0
[ 685.233806] usb-storage: Attempting to get CSW...
[ 685.233810] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 685.234789] usb-storage: Status code 0; transferred 13/13
[ 685.234793] usb-storage: -- transfer complete
[ 685.234797] usb-storage: Bulk status result = 0
[ 685.234802] usb-storage: Bulk Status S 0x53425355 T 0xc2c R 0 Stat 0x0
[ 685.234808] usb-storage: scsi cmd done, result=0x0
[ 685.234814] usb-storage: *** thread sleeping.
[ 690.758541] usb-storage: queuecommand called
[ 690.758573] usb-storage: *** thread awakened.
[ 690.758581] usb-storage: Command WRITE_10 (10 bytes)
[ 690.758586] usb-storage: 2a 00 00 74 33 af 00 00 50 00
[ 690.758605] usb-storage: Bulk Command S 0x43425355 T 0xc2d L 40960 F 0 Trg 0 LUN 0 CL 10
[ 690.758612] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 690.759796] usb-storage: Status code 0; transferred 31/31
[ 690.759800] usb-storage: -- transfer complete
[ 690.759804] usb-storage: Bulk command transfer result=0
[ 690.759810] usb-storage: usb_stor_bulk_transfer_sglist: xfer 40960 bytes, 10 entries
[ 690.957812] usb-storage: Status code 0; transferred 40960/40960
[ 690.957817] usb-storage: -- transfer complete
[ 690.957821] usb-storage: Bulk data transfer result 0x0
[ 690.957825] usb-storage: Attempting to get CSW...
[ 690.957830] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 690.961774] usb-storage: Status code 0; transferred 13/13
[ 690.961779] usb-storage: -- transfer complete
[ 690.961783] usb-storage: Bulk status result = 0
[ 690.961788] usb-storage: Bulk Status S 0x53425355 T 0xc2d R 0 Stat 0x0
[ 690.961794] usb-storage: scsi cmd done, result=0x0
[ 690.961800] usb-storage: *** thread sleeping.
[ 690.961912] usb-storage: queuecommand called
[ 690.962533] usb-storage: *** thread awakened.
[ 690.962540] usb-storage: Command WRITE_10 (10 bytes)
[ 690.962544] usb-storage: 2a 00 00 74 33 ff 00 00 08 00
[ 690.962564] usb-storage: Bulk Command S 0x43425355 T 0xc2e L 4096 F 0 Trg 0 LUN 0 CL 10
[ 690.962570] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 690.962829] usb-storage: Status code 0; transferred 31/31
[ 690.962834] usb-storage: -- transfer complete
[ 690.962838] usb-storage: Bulk command transfer result=0
[ 690.962844] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 690.974789] usb-storage: Status code 0; transferred 4096/4096
[ 690.974792] usb-storage: -- transfer complete
[ 690.974794] usb-storage: Bulk data transfer result 0x0
[ 690.974796] usb-storage: Attempting to get CSW...
[ 690.974798] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 690.976773] usb-storage: Status code 0; transferred 13/13
[ 690.976775] usb-storage: -- transfer complete
[ 690.976777] usb-storage: Bulk status result = 0
[ 690.976779] usb-storage: Bulk Status S 0x53425355 T 0xc2e R 0 Stat 0x0
[ 690.976782] usb-storage: scsi cmd done, result=0x0
[ 690.976786] usb-storage: *** thread sleeping.
[ 695.010039] usb-storage: queuecommand called
[ 695.010052] usb-storage: *** thread awakened.
[ 695.010057] usb-storage: Command WRITE_10 (10 bytes)
[ 695.010061] usb-storage: 2a 00 00 b9 1f 2f 00 00 48 00
[ 695.010081] usb-storage: Bulk Command S 0x43425355 T 0xc2f L 36864 F 0 Trg 0 LUN 0 CL 10
[ 695.010087] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 695.011781] usb-storage: Status code 0; transferred 31/31
[ 695.011785] usb-storage: -- transfer complete
[ 695.011789] usb-storage: Bulk command transfer result=0
[ 695.011795] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 695.200818] usb-storage: Status code 0; transferred 36864/36864
[ 695.200824] usb-storage: -- transfer complete
[ 695.200828] usb-storage: Bulk data transfer result 0x0
[ 695.200833] usb-storage: Attempting to get CSW...
[ 695.200838] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 695.225804] usb-storage: Status code 0; transferred 13/13
[ 695.225809] usb-storage: -- transfer complete
[ 695.225813] usb-storage: Bulk status result = 0
[ 695.225818] usb-storage: Bulk Status S 0x53425355 T 0xc2f R 0 Stat 0x0
[ 695.225824] usb-storage: scsi cmd done, result=0x0
[ 695.225831] usb-storage: *** thread sleeping.
[ 696.040165] usb-storage: queuecommand called
[ 696.040179] usb-storage: *** thread awakened.
[ 696.040185] usb-storage: Command WRITE_10 (10 bytes)
[ 696.040188] usb-storage: 2a 00 00 74 34 07 00 00 48 00
[ 696.040208] usb-storage: Bulk Command S 0x43425355 T 0xc30 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 696.040215] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 696.041794] usb-storage: Status code 0; transferred 31/31
[ 696.041798] usb-storage: -- transfer complete
[ 696.041802] usb-storage: Bulk command transfer result=0
[ 696.041808] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 696.087817] usb-storage: Status code 0; transferred 36864/36864
[ 696.087822] usb-storage: -- transfer complete
[ 696.087826] usb-storage: Bulk data transfer result 0x0
[ 696.087830] usb-storage: Attempting to get CSW...
[ 696.087835] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 696.112787] usb-storage: Status code 0; transferred 13/13
[ 696.112792] usb-storage: -- transfer complete
[ 696.112796] usb-storage: Bulk status result = 0
[ 696.112802] usb-storage: Bulk Status S 0x53425355 T 0xc30 R 0 Stat 0x0
[ 696.112807] usb-storage: scsi cmd done, result=0x0
[ 696.112813] usb-storage: *** thread sleeping.
[ 696.112898] usb-storage: queuecommand called
[ 696.112910] usb-storage: *** thread awakened.
[ 696.112915] usb-storage: Command WRITE_10 (10 bytes)
[ 696.112919] usb-storage: 2a 00 00 74 34 4f 00 00 08 00
[ 696.112938] usb-storage: Bulk Command S 0x43425355 T 0xc31 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 696.112943] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 696.113808] usb-storage: Status code 0; transferred 31/31
[ 696.113813] usb-storage: -- transfer complete
[ 696.113817] usb-storage: Bulk command transfer result=0
[ 696.113824] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 696.120801] usb-storage: Status code 0; transferred 4096/4096
[ 696.120806] usb-storage: -- transfer complete
[ 696.120810] usb-storage: Bulk data transfer result 0x0
[ 696.120814] usb-storage: Attempting to get CSW...
[ 696.120819] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 696.121775] usb-storage: Status code 0; transferred 13/13
[ 696.121780] usb-storage: -- transfer complete
[ 696.121784] usb-storage: Bulk status result = 0
[ 696.121789] usb-storage: Bulk Status S 0x53425355 T 0xc31 R 0 Stat 0x0
[ 696.121794] usb-storage: scsi cmd done, result=0x0
[ 696.121801] usb-storage: *** thread sleeping.
[ 701.040152] usb-storage: queuecommand called
[ 701.040190] usb-storage: *** thread awakened.
[ 701.040198] usb-storage: Command WRITE_10 (10 bytes)
[ 701.040202] usb-storage: 2a 00 00 74 34 57 00 00 50 00
[ 701.040222] usb-storage: Bulk Command S 0x43425355 T 0xc32 L 40960 F 0 Trg 0 LUN 0 CL 10
[ 701.040228] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 701.041795] usb-storage: Status code 0; transferred 31/31
[ 701.041799] usb-storage: -- transfer complete
[ 701.041803] usb-storage: Bulk command transfer result=0
[ 701.041809] usb-storage: usb_stor_bulk_transfer_sglist: xfer 40960 bytes, 10 entries
[ 701.094831] usb-storage: Status code 0; transferred 40960/40960
[ 701.094835] usb-storage: -- transfer complete
[ 701.094840] usb-storage: Bulk data transfer result 0x0
[ 701.094844] usb-storage: Attempting to get CSW...
[ 701.094849] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 701.098794] usb-storage: Status code 0; transferred 13/13
[ 701.098798] usb-storage: -- transfer complete
[ 701.098802] usb-storage: Bulk status result = 0
[ 701.098807] usb-storage: Bulk Status S 0x53425355 T 0xc32 R 0 Stat 0x0
[ 701.098813] usb-storage: scsi cmd done, result=0x0
[ 701.098820] usb-storage: *** thread sleeping.
[ 701.098908] usb-storage: queuecommand called
[ 701.098920] usb-storage: *** thread awakened.
[ 701.098925] usb-storage: Command WRITE_10 (10 bytes)
[ 701.098928] usb-storage: 2a 00 00 74 34 a7 00 00 08 00
[ 701.098947] usb-storage: Bulk Command S 0x43425355 T 0xc33 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 701.098953] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 701.099784] usb-storage: Status code 0; transferred 31/31
[ 701.099788] usb-storage: -- transfer complete
[ 701.099792] usb-storage: Bulk command transfer result=0
[ 701.099798] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 701.106819] usb-storage: Status code 0; transferred 4096/4096
[ 701.106824] usb-storage: -- transfer complete
[ 701.106828] usb-storage: Bulk data transfer result 0x0
[ 701.106832] usb-storage: Attempting to get CSW...
[ 701.106837] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 701.108797] usb-storage: Status code 0; transferred 13/13
[ 701.108802] usb-storage: -- transfer complete
[ 701.108806] usb-storage: Bulk status result = 0
[ 701.108812] usb-storage: Bulk Status S 0x53425355 T 0xc33 R 0 Stat 0x0
[ 701.108818] usb-storage: scsi cmd done, result=0x0
[ 701.108825] usb-storage: *** thread sleeping.
[ 705.010041] usb-storage: queuecommand called
[ 705.010074] usb-storage: *** thread awakened.
[ 705.010080] usb-storage: Command WRITE_10 (10 bytes)
[ 705.010084] usb-storage: 2a 00 00 b9 68 97 00 00 20 00
[ 705.010104] usb-storage: Bulk Command S 0x43425355 T 0xc34 L 16384 F 0 Trg 0 LUN 0 CL 10
[ 705.010110] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 705.011785] usb-storage: Status code 0; transferred 31/31
[ 705.011790] usb-storage: -- transfer complete
[ 705.011794] usb-storage: Bulk command transfer result=0
[ 705.011800] usb-storage: usb_stor_bulk_transfer_sglist: xfer 16384 bytes, 4 entries
[ 705.062814] usb-storage: Status code 0; transferred 16384/16384
[ 705.062819] usb-storage: -- transfer complete
[ 705.062823] usb-storage: Bulk data transfer result 0x0
[ 705.062827] usb-storage: Attempting to get CSW...
[ 705.062832] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 705.087807] usb-storage: Status code 0; transferred 13/13
[ 705.087812] usb-storage: -- transfer complete
[ 705.087816] usb-storage: Bulk status result = 0
[ 705.087821] usb-storage: Bulk Status S 0x53425355 T 0xc34 R 0 Stat 0x0
[ 705.087826] usb-storage: scsi cmd done, result=0x0
[ 705.087833] usb-storage: *** thread sleeping.
[ 705.087867] usb-storage: queuecommand called
[ 705.087883] usb-storage: *** thread awakened.
[ 705.087889] usb-storage: Command WRITE_10 (10 bytes)
[ 705.087892] usb-storage: 2a 00 00 b9 6b 7f 00 00 30 00
[ 705.087911] usb-storage: Bulk Command S 0x43425355 T 0xc35 L 24576 F 0 Trg 0 LUN 0 CL 10
[ 705.087917] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 705.088782] usb-storage: Status code 0; transferred 31/31
[ 705.088786] usb-storage: -- transfer complete
[ 705.088790] usb-storage: Bulk command transfer result=0
[ 705.088796] usb-storage: usb_stor_bulk_transfer_sglist: xfer 24576 bytes, 6 entries
[ 705.244802] usb-storage: Status code 0; transferred 24576/24576
[ 705.244805] usb-storage: -- transfer complete
[ 705.244807] usb-storage: Bulk data transfer result 0x0
[ 705.244809] usb-storage: Attempting to get CSW...
[ 705.244812] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 705.249785] usb-storage: Status code 0; transferred 13/13
[ 705.249787] usb-storage: -- transfer complete
[ 705.249789] usb-storage: Bulk status result = 0
[ 705.249791] usb-storage: Bulk Status S 0x53425355 T 0xc35 R 0 Stat 0x0
[ 705.249794] usb-storage: scsi cmd done, result=0x0
[ 705.249798] usb-storage: *** thread sleeping.
[ 705.249821] usb-storage: queuecommand called
[ 705.249826] usb-storage: *** thread awakened.
[ 705.249829] usb-storage: Command WRITE_10 (10 bytes)
[ 705.249831] usb-storage: 2a 00 00 b9 26 97 00 00 50 00
[ 705.249840] usb-storage: Bulk Command S 0x43425355 T 0xc36 L 40960 F 0 Trg 0 LUN 0 CL 10
[ 705.249843] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 705.250781] usb-storage: Status code 0; transferred 31/31
[ 705.250786] usb-storage: -- transfer complete
[ 705.250790] usb-storage: Bulk command transfer result=0
[ 705.250796] usb-storage: usb_stor_bulk_transfer_sglist: xfer 40960 bytes, 10 entries
[ 705.430794] usb-storage: Status code 0; transferred 40960/40960
[ 705.430797] usb-storage: -- transfer complete
[ 705.430799] usb-storage: Bulk data transfer result 0x0
[ 705.430801] usb-storage: Attempting to get CSW...
[ 705.430804] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 705.432771] usb-storage: Status code 0; transferred 13/13
[ 705.432773] usb-storage: -- transfer complete
[ 705.432775] usb-storage: Bulk status result = 0
[ 705.432778] usb-storage: Bulk Status S 0x53425355 T 0xc36 R 0 Stat 0x0
[ 705.432780] usb-storage: scsi cmd done, result=0x0
[ 705.432783] usb-storage: *** thread sleeping.
[ 706.040138] usb-storage: queuecommand called
[ 706.040150] usb-storage: *** thread awakened.
[ 706.040156] usb-storage: Command WRITE_10 (10 bytes)
[ 706.040160] usb-storage: 2a 00 00 74 34 af 00 00 48 00
[ 706.040179] usb-storage: Bulk Command S 0x43425355 T 0xc37 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 706.040185] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 706.041782] usb-storage: Status code 0; transferred 31/31
[ 706.041786] usb-storage: -- transfer complete
[ 706.041790] usb-storage: Bulk command transfer result=0
[ 706.041796] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 706.115819] usb-storage: Status code 0; transferred 36864/36864
[ 706.115825] usb-storage: -- transfer complete
[ 706.115829] usb-storage: Bulk data transfer result 0x0
[ 706.115834] usb-storage: Attempting to get CSW...
[ 706.115839] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 706.140791] usb-storage: Status code 0; transferred 13/13
[ 706.140795] usb-storage: -- transfer complete
[ 706.140800] usb-storage: Bulk status result = 0
[ 706.140805] usb-storage: Bulk Status S 0x53425355 T 0xc37 R 0 Stat 0x0
[ 706.140811] usb-storage: scsi cmd done, result=0x0
[ 706.140818] usb-storage: *** thread sleeping.
[ 706.140917] usb-storage: queuecommand called
[ 706.141571] usb-storage: *** thread awakened.
[ 706.141577] usb-storage: Command WRITE_10 (10 bytes)
[ 706.141581] usb-storage: 2a 00 00 74 34 f7 00 00 08 00
[ 706.141601] usb-storage: Bulk Command S 0x43425355 T 0xc38 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 706.141607] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 706.141798] usb-storage: Status code 0; transferred 31/31
[ 706.141803] usb-storage: -- transfer complete
[ 706.141807] usb-storage: Bulk command transfer result=0
[ 706.141813] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 706.147819] usb-storage: Status code 0; transferred 4096/4096
[ 706.147824] usb-storage: -- transfer complete
[ 706.147829] usb-storage: Bulk data transfer result 0x0
[ 706.147832] usb-storage: Attempting to get CSW...
[ 706.147837] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 706.149794] usb-storage: Status code 0; transferred 13/13
[ 706.149799] usb-storage: -- transfer complete
[ 706.149803] usb-storage: Bulk status result = 0
[ 706.149809] usb-storage: Bulk Status S 0x53425355 T 0xc38 R 0 Stat 0x0
[ 706.149815] usb-storage: scsi cmd done, result=0x0
[ 706.149823] usb-storage: *** thread sleeping.
[ 710.010049] usb-storage: queuecommand called
[ 710.010083] usb-storage: *** thread awakened.
[ 710.010092] usb-storage: Command WRITE_10 (10 bytes)
[ 710.010096] usb-storage: 2a 00 00 b7 49 6f 00 00 08 00
[ 710.010116] usb-storage: Bulk Command S 0x43425355 T 0xc39 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 710.010123] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 710.011799] usb-storage: Status code 0; transferred 31/31
[ 710.011804] usb-storage: -- transfer complete
[ 710.011808] usb-storage: Bulk command transfer result=0
[ 710.011814] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 710.025814] usb-storage: Status code 0; transferred 4096/4096
[ 710.025819] usb-storage: -- transfer complete
[ 710.025824] usb-storage: Bulk data transfer result 0x0
[ 710.025828] usb-storage: Attempting to get CSW...
[ 710.025833] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 710.050792] usb-storage: Status code 0; transferred 13/13
[ 710.050797] usb-storage: -- transfer complete
[ 710.050802] usb-storage: Bulk status result = 0
[ 710.050807] usb-storage: Bulk Status S 0x53425355 T 0xc39 R 0 Stat 0x0
[ 710.050813] usb-storage: scsi cmd done, result=0x0
[ 710.050821] usb-storage: *** thread sleeping.
[ 711.040205] usb-storage: queuecommand called
[ 711.040242] usb-storage: *** thread awakened.
[ 711.040250] usb-storage: Command WRITE_10 (10 bytes)
[ 711.040254] usb-storage: 2a 00 00 74 34 ff 00 00 50 00
[ 711.040274] usb-storage: Bulk Command S 0x43425355 T 0xc3a L 40960 F 0 Trg 0 LUN 0 CL 10
[ 711.040280] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 711.041796] usb-storage: Status code 0; transferred 31/31
[ 711.041800] usb-storage: -- transfer complete
[ 711.041804] usb-storage: Bulk command transfer result=0
[ 711.041810] usb-storage: usb_stor_bulk_transfer_sglist: xfer 40960 bytes, 10 entries
[ 711.132833] usb-storage: Status code 0; transferred 40960/40960
[ 711.132838] usb-storage: -- transfer complete
[ 711.132843] usb-storage: Bulk data transfer result 0x0
[ 711.132847] usb-storage: Attempting to get CSW...
[ 711.132852] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 711.134780] usb-storage: Status code 0; transferred 13/13
[ 711.134784] usb-storage: -- transfer complete
[ 711.134788] usb-storage: Bulk status result = 0
[ 711.134793] usb-storage: Bulk Status S 0x53425355 T 0xc3a R 0 Stat 0x0
[ 711.134799] usb-storage: scsi cmd done, result=0x0
[ 711.134806] usb-storage: *** thread sleeping.
[ 711.134893] usb-storage: queuecommand called
[ 711.134905] usb-storage: *** thread awakened.
[ 711.134910] usb-storage: Command WRITE_10 (10 bytes)
[ 711.134914] usb-storage: 2a 00 00 74 35 4f 00 00 08 00
[ 711.134933] usb-storage: Bulk Command S 0x43425355 T 0xc3b L 4096 F 0 Trg 0 LUN 0 CL 10
[ 711.134938] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 711.135799] usb-storage: Status code 0; transferred 31/31
[ 711.135803] usb-storage: -- transfer complete
[ 711.135807] usb-storage: Bulk command transfer result=0
[ 711.135812] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 711.141816] usb-storage: Status code 0; transferred 4096/4096
[ 711.141821] usb-storage: -- transfer complete
[ 711.141826] usb-storage: Bulk data transfer result 0x0
[ 711.141830] usb-storage: Attempting to get CSW...
[ 711.141835] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 711.143793] usb-storage: Status code 0; transferred 13/13
[ 711.143798] usb-storage: -- transfer complete
[ 711.143803] usb-storage: Bulk status result = 0
[ 711.143810] usb-storage: Bulk Status S 0x53425355 T 0xc3b R 0 Stat 0x0
[ 711.143816] usb-storage: scsi cmd done, result=0x0
[ 711.143825] usb-storage: *** thread sleeping.
[ 715.010045] usb-storage: queuecommand called
[ 715.010060] usb-storage: *** thread awakened.
[ 715.010067] usb-storage: Command WRITE_10 (10 bytes)
[ 715.010071] usb-storage: 2a 00 00 b4 00 f7 00 00 08 00
[ 715.010091] usb-storage: Bulk Command S 0x43425355 T 0xc3c L 4096 F 0 Trg 0 LUN 0 CL 10
[ 715.010097] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 715.011785] usb-storage: Status code 0; transferred 31/31
[ 715.011789] usb-storage: -- transfer complete
[ 715.011793] usb-storage: Bulk command transfer result=0
[ 715.011799] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 715.025827] usb-storage: Status code 0; transferred 4096/4096
[ 715.025832] usb-storage: -- transfer complete
[ 715.025837] usb-storage: Bulk data transfer result 0x0
[ 715.025840] usb-storage: Attempting to get CSW...
[ 715.025845] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 715.050792] usb-storage: Status code 0; transferred 13/13
[ 715.050798] usb-storage: -- transfer complete
[ 715.050802] usb-storage: Bulk status result = 0
[ 715.050808] usb-storage: Bulk Status S 0x53425355 T 0xc3c R 0 Stat 0x0
[ 715.050814] usb-storage: scsi cmd done, result=0x0
[ 715.050821] usb-storage: *** thread sleeping.
[ 716.040181] usb-storage: queuecommand called
[ 716.040194] usb-storage: *** thread awakened.
[ 716.040200] usb-storage: Command WRITE_10 (10 bytes)
[ 716.040204] usb-storage: 2a 00 00 74 35 57 00 00 50 00
[ 716.040224] usb-storage: Bulk Command S 0x43425355 T 0xc3d L 40960 F 0 Trg 0 LUN 0 CL 10
[ 716.040231] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 716.041797] usb-storage: Status code 0; transferred 31/31
[ 716.041802] usb-storage: -- transfer complete
[ 716.041806] usb-storage: Bulk command transfer result=0
[ 716.041812] usb-storage: usb_stor_bulk_transfer_sglist: xfer 40960 bytes, 10 entries
[ 716.146819] usb-storage: Status code 0; transferred 40960/40960
[ 716.146825] usb-storage: -- transfer complete
[ 716.146829] usb-storage: Bulk data transfer result 0x0
[ 716.146833] usb-storage: Attempting to get CSW...
[ 716.146838] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 716.148782] usb-storage: Status code 0; transferred 13/13
[ 716.148786] usb-storage: -- transfer complete
[ 716.148790] usb-storage: Bulk status result = 0
[ 716.148795] usb-storage: Bulk Status S 0x53425355 T 0xc3d R 0 Stat 0x0
[ 716.148800] usb-storage: scsi cmd done, result=0x0
[ 716.148807] usb-storage: *** thread sleeping.
[ 716.148892] usb-storage: queuecommand called
[ 716.148903] usb-storage: *** thread awakened.
[ 716.148908] usb-storage: Command WRITE_10 (10 bytes)
[ 716.148912] usb-storage: 2a 00 00 74 35 a7 00 00 08 00
[ 716.148931] usb-storage: Bulk Command S 0x43425355 T 0xc3e L 4096 F 0 Trg 0 LUN 0 CL 10
[ 716.148936] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 716.149805] usb-storage: Status code 0; transferred 31/31
[ 716.149811] usb-storage: -- transfer complete
[ 716.149815] usb-storage: Bulk command transfer result=0
[ 716.149821] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 716.156820] usb-storage: Status code 0; transferred 4096/4096
[ 716.156825] usb-storage: -- transfer complete
[ 716.156829] usb-storage: Bulk data transfer result 0x0
[ 716.156833] usb-storage: Attempting to get CSW...
[ 716.156838] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 716.157802] usb-storage: Status code 0; transferred 13/13
[ 716.157806] usb-storage: -- transfer complete
[ 716.157810] usb-storage: Bulk status result = 0
[ 716.157815] usb-storage: Bulk Status S 0x53425355 T 0xc3e R 0 Stat 0x0
[ 716.157820] usb-storage: scsi cmd done, result=0x0
[ 716.157827] usb-storage: *** thread sleeping.
[ 730.010050] usb-storage: queuecommand called
[ 730.010082] usb-storage: *** thread awakened.
[ 730.010090] usb-storage: Command WRITE_10 (10 bytes)
[ 730.010094] usb-storage: 2a 00 00 b9 1f 6f 00 00 48 00
[ 730.010114] usb-storage: Bulk Command S 0x43425355 T 0xc3f L 36864 F 0 Trg 0 LUN 0 CL 10
[ 730.010120] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 730.011785] usb-storage: Status code 0; transferred 31/31
[ 730.011790] usb-storage: -- transfer complete
[ 730.011794] usb-storage: Bulk command transfer result=0
[ 730.011799] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 730.209835] usb-storage: Status code 0; transferred 36864/36864
[ 730.209841] usb-storage: -- transfer complete
[ 730.209845] usb-storage: Bulk data transfer result 0x0
[ 730.209850] usb-storage: Attempting to get CSW...
[ 730.209855] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 730.234791] usb-storage: Status code 0; transferred 13/13
[ 730.234796] usb-storage: -- transfer complete
[ 730.234800] usb-storage: Bulk status result = 0
[ 730.234806] usb-storage: Bulk Status S 0x53425355 T 0xc3f R 0 Stat 0x0
[ 730.234811] usb-storage: scsi cmd done, result=0x0
[ 730.234818] usb-storage: *** thread sleeping.
[ 730.234861] usb-storage: queuecommand called
[ 730.234871] usb-storage: *** thread awakened.
[ 730.234877] usb-storage: Command WRITE_10 (10 bytes)
[ 730.234881] usb-storage: 2a 00 00 74 35 af 00 00 48 00
[ 730.234899] usb-storage: Bulk Command S 0x43425355 T 0xc40 L 36864 F 0 Trg 0 LUN 0 CL 10
[ 730.234905] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 730.235794] usb-storage: Status code 0; transferred 31/31
[ 730.235799] usb-storage: -- transfer complete
[ 730.235804] usb-storage: Bulk command transfer result=0
[ 730.235810] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36864 bytes, 9 entries
[ 730.392821] usb-storage: Status code 0; transferred 36864/36864
[ 730.392826] usb-storage: -- transfer complete
[ 730.392830] usb-storage: Bulk data transfer result 0x0
[ 730.392834] usb-storage: Attempting to get CSW...
[ 730.392839] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 730.417806] usb-storage: Status code 0; transferred 13/13
[ 730.417810] usb-storage: -- transfer complete
[ 730.417814] usb-storage: Bulk status result = 0
[ 730.417820] usb-storage: Bulk Status S 0x53425355 T 0xc40 R 0 Stat 0x0
[ 730.417825] usb-storage: scsi cmd done, result=0x0
[ 730.417831] usb-storage: *** thread sleeping.
[ 730.417912] usb-storage: queuecommand called
[ 730.417923] usb-storage: *** thread awakened.
[ 730.417928] usb-storage: Command WRITE_10 (10 bytes)
[ 730.417932] usb-storage: 2a 00 00 74 35 f7 00 00 08 00
[ 730.417950] usb-storage: Bulk Command S 0x43425355 T 0xc41 L 4096 F 0 Trg 0 LUN 0 CL 10
[ 730.417956] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 730.418787] usb-storage: Status code 0; transferred 31/31
[ 730.418792] usb-storage: -- transfer complete
[ 730.418796] usb-storage: Bulk command transfer result=0
[ 730.418802] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 730.424802] usb-storage: Status code 0; transferred 4096/4096
[ 730.424807] usb-storage: -- transfer complete
[ 730.424811] usb-storage: Bulk data transfer result 0x0
[ 730.424816] usb-storage: Attempting to get CSW...
[ 730.424821] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 730.425784] usb-storage: Status code 0; transferred 13/13
[ 730.425789] usb-storage: -- transfer complete
[ 730.425793] usb-storage: Bulk status result = 0
[ 730.425799] usb-storage: Bulk Status S 0x53425355 T 0xc41 R 0 Stat 0x0
[ 730.425804] usb-storage: scsi cmd done, result=0x0
[ 730.425810] usb-storage: *** thread sleeping.
[-- Attachment #15: vista-wireless-connection.jpg --]
[-- Type: image/jpeg, Size: 43059 bytes --]
^ permalink raw reply
* Re: zd1211rw on ppc (iBook G4) -- Solved, somewhat)
From: Leonardo H. Souza Hamada @ 2009-09-14 16:47 UTC (permalink / raw)
To: linux-wireless
In-Reply-To: <43e72e890909132109l4b47431cw85cfba21ec1fb42c@mail.gmail.com>
Luis R. Rodriguez wrote:
> On Sun, Sep 13, 2009 at 8:41 PM, Hin-Tak Leung <hintak.leung@gmail.com> wrote:
>
>> On Sun, Sep 13, 2009 at 11:13 AM, Hin-Tak Leung <hintak.leung@gmail.com> wrote:
>>
>>> On Sat, Sep 12, 2009 at 11:43 PM, Leonardo H. Souza Hamada
>>> <leonardo.hamada@ufra.edu.br> wrote:
>>>
>>>> Hi all,
>>>>
>>>> At this moment, after tweaking the zd1211rw code in kernel
>>>> 2.6.31-gentoo, finally I am able to use the WLI-U2-KG54L wireless usb
>>>> dongle on this old ibook.
>>>>
>>>> Browsing the source with a cross referencing tool
>>>> (http://lxr.free-electrons.com) and making additional checking points, I
>>>> could trace the issue as follow.
>>>>
>>>> The problem is that this device returns a regulatory region of 0x49,
>>>> which is not defined in the zd1211rw tables. So the call
>>>>
>>>> r <http://lxr.free-electrons.com/ident?i=r> = zd_reg2alpha2 <http://lxr.free-electrons.com/ident?i=zd_reg2alpha2>(mac <http://lxr.free-electrons.com/ident?i=mac>->regdomain, alpha2);
>>>>
>>>> will fail the initialization process.
>>>>
>>>>
>>>> Workaround:
>>>>
>>>> ----snip----
>>>> int zd_mac_init_hw(struct ieee80211_hw *hw)
>>>> {
>>>> ...
>>>> r = zd_read_regdomain(chip, &default_regdomain);
>>>> /* A unknown regulatory of 0x49 will be set default to
>>>> ZD_REGDOMAIN_FCC. */
>>>> if (0x49 == default_regdomain)
>>>> default_regdomain = ZD_REGDOMAIN_FCC;
>>>> ...
>>>> ----snip----
>>>>
>>>> The above code will force the default regulatry to be FCC code for this
>>>> case. I think that this was the case in previous zd1211rw driver. What
>>>> is the country code for 0x49 region? There is a better way?
>>>>
>>>>
>>>> Thanks all,
>>>>
>>>> Phew!! Leonardo
>>>>
>>> The vendor driver has quite a lot more regdomain code defined, and
>>> 0x49 is apparently
>>>
>>> ZD_Region_Japan_3 = 0x49,//G channel->ch1-13; A channel->8~16,34~46;
>>>
>>> the rw driver code probably should set it to most restrictive than let
>>> it fail...
>>>
>>>
>> Can you give this patch a try against a recent
>> wireless-testing/compat-wireless? I think this is the correct way to
>> do things.
>>
>> Here is the content of the patch for others who doesn't like
>> attachments - it just sets 0x49 as Japan.
>> ==============================
>> diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c
>> b/drivers/net/wireless/zd1211rw/zd_mac.c
>> index 6d66635..b0d32c4 100644
>> --- a/drivers/net/wireless/zd1211rw/zd_mac.c
>> +++ b/drivers/net/wireless/zd1211rw/zd_mac.c
>> @@ -42,6 +42,7 @@ static struct zd_reg_alpha2_map reg_alpha2_map[] = {
>> { ZD_REGDOMAIN_ETSI, "DE" }, /* Generic ETSI, use most restrictive */
>> { ZD_REGDOMAIN_JAPAN, "JP" },
>> { ZD_REGDOMAIN_JAPAN_ADD, "JP" },
>> + { ZD_REGDOMAIN_JAPAN_3, "JP" },
>> { ZD_REGDOMAIN_SPAIN, "ES" },
>> { ZD_REGDOMAIN_FRANCE, "FR" },
>> };
>> diff --git a/drivers/net/wireless/zd1211rw/zd_mac.h
>> b/drivers/net/wireless/zd1211rw/zd_mac.h
>> index 7c27591..9701935 100644
>> --- a/drivers/net/wireless/zd1211rw/zd_mac.h
>> +++ b/drivers/net/wireless/zd1211rw/zd_mac.h
>> @@ -193,6 +193,7 @@ struct zd_mac {
>> #define ZD_REGDOMAIN_FRANCE 0x32
>> #define ZD_REGDOMAIN_JAPAN_ADD 0x40
>> #define ZD_REGDOMAIN_JAPAN 0x41
>> +#define ZD_REGDOMAIN_JAPAN_3 0x49
>>
>
> FWIW, this does seem right.
>
> Luis
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
*
Ok, got *compat-wireless-2.6.tar.bz2
<http://wireless.kernel.org/download/compat-wireless-2.6/compat-wireless-2.6.tar.bz2>*
"bleeding edge compat-wireless" from* here:
http://wireless.kernel.org/download/compat-wireless-2.6/compat-wireless-2.6.tar.bz2
Steps done, so so:
tar -xjf compat-wireless-2.6.tar.bz2
cd compat-wireless-2009-09-14/
cp -v ../zd1211rw_jp3.diff .
`../zd1211rw_jp3.diff' -> `./zd1211rw_jp3.diff'
patch -p1 < zd1211rw_jp3.diff
patching file drivers/net/wireless/zd1211rw/zd_mac.c
patching file drivers/net/wireless/zd1211rw/zd_mac.h
./scripts/driver-select zd1211rw
Processing new driver-select request...
Backing up makefile: Makefile.bk
Backing up makefile: drivers/net/wireless/Makefile.bk
Backing up makefile: net/wireless/Makefile.bk
Backing up makefile: drivers/ssb/Makefile.bk
Backing up makefile: drivers/net/usb/Makefile.bk
Backing up makefile: drivers/misc/eeprom/Makefile.bk
make
/home/leo/compat-wireless-2009-09-14/config.mk:17: *** "ERROR: you have
MAC80211 compiled into the kernel, CONFIG_MAC80211=y, as such you cannot
replace its mac80211 driver. You need this set to CONFIG_MAC80211=m. If
you are using Fedora upgrade your kernel as later version should this
set as modular. For further information on Fedora see
https://bugzilla.redhat.com/show_bug.cgi?id=470143. If you are using
your own kernel recompile it and make mac80211 modular". Pare.
<<<Disabling original zd1211rw in kernel configuration, recompiled
kernel as instructed above, installed new kernel, reboot, many times
until I got it right>>>
Results:
dmesg seems ok. no errors.
can do iwlist wlan0
iwconfig wlan0 shows:
IEEE 802.11bg Mode:Managed Access Point: Not-Associated
Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
I do not seem to be able to connect to a given access point so far. LED
does not blink.
It can be that there is a query on the new values against other. Just a
guess.
Regards,
Leonardo
^ permalink raw reply
* Re: RTL8187B wireless driver issue
From: Larry Finger @ 2009-09-14 16:50 UTC (permalink / raw)
To: Vignette consultant; +Cc: wireless
In-Reply-To: <3b0e19890909140905g4c6bfef3t38cd94a205d26f8@mail.gmail.com>
Vignette consultant wrote:
> Hi
>
> Attached files contain several logs of various commands. The log-1
> file is before running command and log-2 file is after running
> specific command.
>
> Here are commands that I give as soon as I log in. It's server edition.
>
> $ sudo ifconfig wlan0 up
> $ sudo iwconfig wlan0 ESSID linksys
> $ sudo dhclient wlan0 - results in no IP addr leased
Your wireless has not associated and has no communication, which is
why it cannot get an IP using DHCP.
A quick check with Google indicates that Ubuntu uses
/etc/network/interfaces to control the devices. Once that is correct,
you should be able to 'sudo /etc/init.d/networking restart' to start
the network. If the server is properly configured, the network should
start on boot.
BTW, the dmesg buffer is circular. All that usb monitoring output has
completely filled the buffer, and it contains no useful information.
^ permalink raw reply
* Re: Kernel oops with 2.6.31-wl
From: Johannes Berg @ 2009-09-14 17:40 UTC (permalink / raw)
To: Larry Finger; +Cc: wireless
In-Reply-To: <4AAE4DAA.1010505@lwfinger.net>
[-- Attachment #1: Type: text/plain, Size: 295 bytes --]
On Mon, 2009-09-14 at 09:05 -0500, Larry Finger wrote:
> Using the kernel v2.6.31-38241-g2d3a51e, I get the following kernel
> oops when unloading b43:
> RIP: 0010:[<ffffffffa02a3a3e>] [<ffffffffa02a3a3e>]
> b43_op_config+0x10c/0x36f [b43]
Seems like a b43 problem to me.
johannes
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 801 bytes --]
^ permalink raw reply
* Re: A station can't reconnect after it wakes up
From: Johannes Berg @ 2009-09-14 17:42 UTC (permalink / raw)
To: Jouni Malinen
Cc: Igor Perminov, Kalle Valo, linux-wireless, hostap, Artur Skawina
In-Reply-To: <20090914125008.GA15494@jm.kir.nu>
[-- Attachment #1: Type: text/plain, Size: 1454 bytes --]
On Mon, 2009-09-14 at 15:50 +0300, Jouni Malinen wrote:
> Taken into account that the AP can even change the Association ID for
> the STA during reassociation, I would be fine with dropping the buffered
> frames and clearing the PS state when association is completed
> successfully (the STA ACKs the (Re)Association Response frame that had
> status code 0). I would hope that the authentication frame sequence or
> failed (re)association would not touch the PS buffer or state.
>
> The real time when the association state changes in the AP is when the
> ACK frame is received for (Re)Association Response frame. Of the options
> you listed, this would be bit after (B), i.e., (C) might be needed to
> get the exact timing right. However, I could probably live with (B),
> too, in practice.
> > But I think, we shouldn't call ap_sta_ps_end as is done for normal PS
> > state switching, because that leads to sending buffered frames if any,
> > which is undesirable in our case. Instead, we should simply purge of
> > buffered frames and clear WLAN_STA_PS.
>
> This is a very good point and we much indeed make sure we do not end up
> sending the buffered frames out based on a new authentication or
> association frame. This is especially important for the case when the
> frames were buffered in RSNA,
Given all this, I still think it would be a lot simpler to just have
hostapd remove the station once.
johannes
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 801 bytes --]
^ permalink raw reply
* Re: [PATCH] cfg80211: don't report SME connection errs at SIOCSIW{FREQ/AP/ESSID}
From: Johannes Berg @ 2009-09-14 17:43 UTC (permalink / raw)
To: Holger Schurig; +Cc: linux-wireless, John W Linville
In-Reply-To: <200909141323.44245.hs4233@mail.mn-solutions.de>
[-- Attachment #1: Type: text/plain, Size: 2001 bytes --]
On Mon, 2009-09-14 at 13:23 +0200, Holger Schurig wrote:
> Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
>
> ---
>
> This fixes
>
> 1252921276.182218: Trying to associate with 00:1b:53:11:dc:40 (SSID='TEST' freq=2412 MHz)
> ioctl[SIOCSIWFREQ]: No such file or directory
> ioctl[SIOCSIWESSID]: No such file or directory
> 1252921276.268451: Association request to the driver failed
> 1252921276.355482: Associated with 00:1b:53:11:dc:40
>
> and makes it
>
> 1252921276.182218: Trying to associate with 00:1b:53:11:dc:40 (SSID='TEST' freq=2412 MHz)
> 1252921276.355482: Associated with 00:1b:53:11:dc:40
>
> However, otherwise this hasn't been greatly tested and I
> don't have a great understanding of cfg80211, SME, etc ...
And doesn't look correct to me at all. probably something missing wrt.
disconnect() while connecting.
johannes
> Index: linux-wl/net/wireless/wext-sme.c
> ===================================================================
> --- linux-wl.orig/net/wireless/wext-sme.c 2009-09-14 12:05:54.000000000 +0200
> +++ linux-wl/net/wireless/wext-sme.c 2009-09-14 12:06:09.000000000 +0200
> @@ -110,7 +110,7 @@ int cfg80211_mgd_wext_siwfreq(struct net
> goto out;
> }
>
> - err = cfg80211_mgd_wext_connect(rdev, wdev);
> + cfg80211_mgd_wext_connect(rdev, wdev);
> out:
> wdev_unlock(wdev);
> mutex_unlock(&rdev->devlist_mtx);
> @@ -196,7 +196,7 @@ int cfg80211_mgd_wext_siwessid(struct ne
>
> wdev->wext.connect.crypto.control_port = false;
>
> - err = cfg80211_mgd_wext_connect(rdev, wdev);
> + cfg80211_mgd_wext_connect(rdev, wdev);
> out:
> wdev_unlock(wdev);
> mutex_unlock(&rdev->devlist_mtx);
> @@ -283,7 +283,7 @@ int cfg80211_mgd_wext_siwap(struct net_d
> } else
> wdev->wext.connect.bssid = NULL;
>
> - err = cfg80211_mgd_wext_connect(rdev, wdev);
> + cfg80211_mgd_wext_connect(rdev, wdev);
> out:
> wdev_unlock(wdev);
> mutex_unlock(&rdev->devlist_mtx);
>
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 801 bytes --]
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox