* [PATCH] cfg80211: NL80211_ATTR_SOCKET_OWNER support for CMD_CONNECT
From: Andrew Zaborowski @ 2016-12-12 0:29 UTC (permalink / raw)
To: linux-wireless
Disconnect or deauthenticate when the owning socket is closed if this
flag is supplied to CMD_CONNECT or CMD_AUTHENTICATE. This may be used
to ensure userspace daemon doesn't leave an unmanaged connection behind.
In some situations it would be possible to account for that, to some
degree, in the deamon restart code, or in the up/down scripts without
the use of this attribute. But there will be systems where the daemon
can go away for varying periods without a warning due to local resource
management.
Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com>
---
include/net/cfg80211.h | 7 +++++++
include/uapi/linux/nl80211.h | 2 ++
net/wireless/core.c | 33 +++++++++++++++++++++++++++++++++
net/wireless/mlme.c | 2 ++
net/wireless/nl80211.c | 28 +++++++++++++++++++++++++++-
net/wireless/sme.c | 4 ++++
6 files changed, 75 insertions(+), 1 deletion(-)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index bd19faa..ca2e252 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -3764,6 +3764,9 @@ struct cfg80211_cached_keys;
* @conn: (private) cfg80211 software SME connection state machine data
* @connect_keys: (private) keys to set after connection is established
* @conn_bss_type: connecting/connected BSS type
+ * @conn_owner_nlportid: (private) connection owner socket port ID
+ * @disconnect_wk: (private) auto-disconnect work
+ * @disconnect_bssid: (private) the BSSID to use for auto-disconnect
* @ibss_fixed: (private) IBSS is using fixed BSSID
* @ibss_dfs_possible: (private) IBSS may change to a DFS channel
* @event_list: (private) list for internal event processing
@@ -3795,6 +3798,10 @@ struct wireless_dev {
struct cfg80211_conn *conn;
struct cfg80211_cached_keys *connect_keys;
enum ieee80211_bss_type conn_bss_type;
+ u32 conn_owner_nlportid;
+
+ struct work_struct disconnect_wk;
+ u8 disconnect_bssid[ETH_ALEN];
struct list_head event_list;
spinlock_t event_lock;
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 56368e9..84db1f0 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -1788,6 +1788,8 @@ enum nl80211_commands {
* and remove functions. NAN notifications will be sent in unicast to that
* socket. Without this attribute, any socket can add functions and the
* notifications will be sent to the %NL80211_MCGRP_NAN multicast group.
+ * If set during %NL80211_CMD_ASSOCIATE or %NL80211_CMD_CONNECT the
+ * station will deauthenticate when the socket is closed.
*
* @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is
* the TDLS link initiator.
diff --git a/net/wireless/core.c b/net/wireless/core.c
index 8201e6d..6b8fd68 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -357,6 +357,36 @@ static void cfg80211_sched_scan_stop_wk(struct work_struct *work)
rtnl_unlock();
}
+static void cfg80211_disconnect_wk(struct work_struct *work)
+{
+ struct cfg80211_registered_device *rdev;
+ struct wireless_dev *wdev;
+
+ wdev = container_of(work, struct wireless_dev, disconnect_wk);
+ rdev = wiphy_to_rdev(wdev->wiphy);
+
+ if (!wdev->netdev)
+ return;
+
+ wdev_lock(wdev);
+
+ if (wdev->conn_owner_nlportid) {
+ /*
+ * Use disconnect_bssid if still connecting and ops->disconnect
+ * not implemented. Otherwise we can use cfg80211_disconnect.
+ */
+ if (rdev->ops->disconnect || wdev->current_bss)
+ cfg80211_disconnect(rdev, wdev->netdev,
+ WLAN_REASON_DEAUTH_LEAVING, true);
+ else
+ cfg80211_mlme_deauth(rdev, wdev->netdev,
+ wdev->disconnect_bssid, NULL, 0,
+ WLAN_REASON_DEAUTH_LEAVING, false);
+ }
+
+ wdev_unlock(wdev);
+}
+
/* exported functions */
struct wiphy *wiphy_new_nm(const struct cfg80211_ops *ops, int sizeof_priv,
@@ -1117,6 +1147,8 @@ static int cfg80211_netdev_notifier_call(struct notifier_block *nb,
wdev->iftype == NL80211_IFTYPE_ADHOC) && !wdev->use_4addr)
dev->priv_flags |= IFF_DONT_BRIDGE;
+ INIT_WORK(&wdev->disconnect_wk, cfg80211_disconnect_wk);
+
nl80211_notify_iface(rdev, wdev, NL80211_CMD_NEW_INTERFACE);
break;
case NETDEV_GOING_DOWN:
@@ -1205,6 +1237,7 @@ static int cfg80211_netdev_notifier_call(struct notifier_block *nb,
#ifdef CONFIG_CFG80211_WEXT
kzfree(wdev->wext.keys);
#endif
+ flush_work(&wdev->disconnect_wk);
}
/*
* synchronise (so that we won't find this netdev
diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c
index cbb48e2..9923244 100644
--- a/net/wireless/mlme.c
+++ b/net/wireless/mlme.c
@@ -328,6 +328,8 @@ int cfg80211_mlme_deauth(struct cfg80211_registered_device *rdev,
ASSERT_WDEV_LOCK(wdev);
+ wdev->conn_owner_nlportid = 0;
+
if (local_state_change &&
(!wdev->current_bss ||
!ether_addr_equal(wdev->current_bss->pub.bssid, bssid)))
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index c510810..502ae92 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -8003,6 +8003,12 @@ static int nl80211_associate(struct sk_buff *skb, struct genl_info *info)
wdev_unlock(dev->ieee80211_ptr);
}
+ if (!err && info->attrs[NL80211_ATTR_SOCKET_OWNER]) {
+ dev->ieee80211_ptr->conn_owner_nlportid = info->snd_portid;
+
+ memcpy(dev->ieee80211_ptr->disconnect_bssid, bssid, ETH_ALEN);
+ }
+
return err;
}
@@ -8050,6 +8056,10 @@ static int nl80211_deauthenticate(struct sk_buff *skb, struct genl_info *info)
err = cfg80211_mlme_deauth(rdev, dev, bssid, ie, ie_len, reason_code,
local_state_change);
wdev_unlock(dev->ieee80211_ptr);
+
+ if (!err)
+ dev->ieee80211_ptr->conn_owner_nlportid = 0;
+
return err;
}
@@ -8097,6 +8107,10 @@ static int nl80211_disassociate(struct sk_buff *skb, struct genl_info *info)
err = cfg80211_mlme_disassoc(rdev, dev, bssid, ie, ie_len, reason_code,
local_state_change);
wdev_unlock(dev->ieee80211_ptr);
+
+ if (!err)
+ dev->ieee80211_ptr->conn_owner_nlportid = 0;
+
return err;
}
@@ -8723,6 +8737,10 @@ static int nl80211_connect(struct sk_buff *skb, struct genl_info *info)
wdev_unlock(dev->ieee80211_ptr);
if (err)
kzfree(connkeys);
+
+ if (!err && info->attrs[NL80211_ATTR_SOCKET_OWNER])
+ dev->ieee80211_ptr->conn_owner_nlportid = info->snd_portid;
+
return err;
}
@@ -14425,13 +14443,21 @@ static int nl80211_netlink_notify(struct notifier_block * nb,
spin_unlock(&rdev->destroy_list_lock);
schedule_work(&rdev->destroy_work);
}
- } else if (schedule_scan_stop) {
+
+ continue;
+ }
+
+ if (schedule_scan_stop) {
sched_scan_req->owner_nlportid = 0;
if (rdev->ops->sched_scan_stop &&
rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_SCHED_SCAN)
schedule_work(&rdev->sched_scan_stop_wk);
}
+
+ list_for_each_entry_rcu(wdev, &rdev->wiphy.wdev_list, list)
+ if (wdev->conn_owner_nlportid == notify->portid)
+ schedule_work(&wdev->disconnect_wk);
}
rcu_read_unlock();
diff --git a/net/wireless/sme.c b/net/wireless/sme.c
index a77db33..f5cc067 100644
--- a/net/wireless/sme.c
+++ b/net/wireless/sme.c
@@ -713,6 +713,7 @@ void __cfg80211_connect_result(struct net_device *dev, const u8 *bssid,
kzfree(wdev->connect_keys);
wdev->connect_keys = NULL;
wdev->ssid_len = 0;
+ wdev->conn_owner_nlportid = 0;
if (bss) {
cfg80211_unhold_bss(bss_from_pub(bss));
cfg80211_put_bss(wdev->wiphy, bss);
@@ -941,6 +942,7 @@ void __cfg80211_disconnected(struct net_device *dev, const u8 *ie,
wdev->current_bss = NULL;
wdev->ssid_len = 0;
+ wdev->conn_owner_nlportid = 0;
nl80211_send_disconnected(rdev, dev, reason, ie, ie_len, from_ap);
@@ -1084,6 +1086,8 @@ int cfg80211_disconnect(struct cfg80211_registered_device *rdev,
kzfree(wdev->connect_keys);
wdev->connect_keys = NULL;
+ wdev->conn_owner_nlportid = 0;
+
if (wdev->conn)
err = cfg80211_sme_disconnect(wdev, reason);
else if (!rdev->ops->disconnect)
--
2.9.3
^ permalink raw reply related
* Re: [PATCH 02/14] rtlwifi_new: Remove RT_TRACE messages that use DBG_EMERG
From: Larry Finger @ 2016-12-11 15:31 UTC (permalink / raw)
To: Joe Perches, kvalo; +Cc: devel, linux-wireless, Ping-Ke Shih
In-Reply-To: <1481453445.1764.11.camel@perches.com>
On 12/11/2016 04:50 AM, Joe Perches wrote:
> On Sat, 2016-12-10 at 23:44 -0600, Larry Finger wrote:
>> These messages are always logged and reprresent error conditions, thus
>> we can use pr_err().
>>
>> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
>> Cc: Ping-Ke Shih <pkshih@realtek.com>
>> ---
>> drivers/net/wireless/realtek/rtlwifi/base.c | 15 ++++-----
>> drivers/net/wireless/realtek/rtlwifi/cam.c | 14 +++------
>> drivers/net/wireless/realtek/rtlwifi/core.c | 21 +++++--------
>> drivers/net/wireless/realtek/rtlwifi/debug.c | 9 ++----
>> drivers/net/wireless/realtek/rtlwifi/debug.h | 2 +-
>> drivers/net/wireless/realtek/rtlwifi/efuse.c | 3 +-
>> drivers/net/wireless/realtek/rtlwifi/pci.c | 36 ++++++++--------------
>> drivers/net/wireless/realtek/rtlwifi/ps.c | 3 +-
>> drivers/net/wireless/realtek/rtlwifi/rc.c | 3 +-
>> drivers/net/wireless/realtek/rtlwifi/usb.c | 46 +++++++++-------------------
>> 10 files changed, 53 insertions(+), 99 deletions(-)
>>
>> diff --git a/drivers/net/wireless/realtek/rtlwifi/base.c b/drivers/net/wireless/realtek/rtlwifi/base.c
> []
>> @@ -207,8 +207,7 @@ static void _rtl_init_hw_ht_capab(struct ieee80211_hw *hw,
>> *highest supported RX rate
>> */
>> if (rtlpriv->dm.supp_phymode_switch) {
>> - RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
>> - "Support phy mode switch\n");
>> + pr_err("rtlwifi: Support phy mode switch\n");
>
> I believe most all of these are already prefixed
> by the wifi.h that has a #define pr_fmt
Yes, I missed that. V2 will not include the module name.
Larry
^ permalink raw reply
* Re: [PATCH 02/14] rtlwifi_new: Remove RT_TRACE messages that use DBG_EMERG
From: Joe Perches @ 2016-12-11 10:50 UTC (permalink / raw)
To: Larry Finger, kvalo; +Cc: devel, linux-wireless, Ping-Ke Shih
In-Reply-To: <20161211054523.7119-3-Larry.Finger@lwfinger.net>
On Sat, 2016-12-10 at 23:44 -0600, Larry Finger wrote:
> These messages are always logged and reprresent error conditions, thus
> we can use pr_err().
>
> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
> Cc: Ping-Ke Shih <pkshih@realtek.com>
> ---
> drivers/net/wireless/realtek/rtlwifi/base.c | 15 ++++-----
> drivers/net/wireless/realtek/rtlwifi/cam.c | 14 +++------
> drivers/net/wireless/realtek/rtlwifi/core.c | 21 +++++--------
> drivers/net/wireless/realtek/rtlwifi/debug.c | 9 ++----
> drivers/net/wireless/realtek/rtlwifi/debug.h | 2 +-
> drivers/net/wireless/realtek/rtlwifi/efuse.c | 3 +-
> drivers/net/wireless/realtek/rtlwifi/pci.c | 36 ++++++++--------------
> drivers/net/wireless/realtek/rtlwifi/ps.c | 3 +-
> drivers/net/wireless/realtek/rtlwifi/rc.c | 3 +-
> drivers/net/wireless/realtek/rtlwifi/usb.c | 46 +++++++++-------------------
> 10 files changed, 53 insertions(+), 99 deletions(-)
>
> diff --git a/drivers/net/wireless/realtek/rtlwifi/base.c b/drivers/net/wireless/realtek/rtlwifi/base.c
[]
> @@ -207,8 +207,7 @@ static void _rtl_init_hw_ht_capab(struct ieee80211_hw *hw,
> *highest supported RX rate
> */
> if (rtlpriv->dm.supp_phymode_switch) {
> - RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
> - "Support phy mode switch\n");
> + pr_err("rtlwifi: Support phy mode switch\n");
I believe most all of these are already prefixed
by the wifi.h that has a #define pr_fmt
^ permalink raw reply
* [PATCH 14/14] rtlwifi: Remove some redundant code
From: Larry Finger @ 2016-12-11 5:45 UTC (permalink / raw)
To: kvalo; +Cc: devel, linux-wireless, Larry Finger, Ping-Ke Shih
In-Reply-To: <20161211054523.7119-1-Larry.Finger@lwfinger.net>
The symbol DBG_EMERG is no longer used and is removed.
In a number of places, the code has redundant messages. For example, if
the failure for the firmware to run is logged, it is not necessary to
log that the firmware has been started. In addition, extraneous braces are
removed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
---
drivers/net/wireless/realtek/rtlwifi/debug.h | 2 +-
drivers/net/wireless/realtek/rtlwifi/rtl8188ee/fw.c | 6 +-----
.../net/wireless/realtek/rtlwifi/rtl8192c/fw_common.c | 6 +-----
drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c | 10 ++--------
drivers/net/wireless/realtek/rtlwifi/rtl8192ee/fw.c | 19 ++-----------------
.../wireless/realtek/rtlwifi/rtl8723com/fw_common.c | 9 +--------
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/fw.c | 15 +++------------
7 files changed, 11 insertions(+), 56 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/debug.h b/drivers/net/wireless/realtek/rtlwifi/debug.h
index 51794bc..75596e2 100644
--- a/drivers/net/wireless/realtek/rtlwifi/debug.h
+++ b/drivers/net/wireless/realtek/rtlwifi/debug.h
@@ -36,7 +36,7 @@
*unexpected HW behavior, HW BUG
*and so on.
*/
-#define DBG_EMERG 0
+/*#define DBG_EMERG 0 */
/*
*Abnormal, rare, or unexpeted cases.
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/fw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/fw.c
index 3ba2a3f..2e22759 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/fw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/fw.c
@@ -221,12 +221,8 @@ int rtl88e_download_fw(struct ieee80211_hw *hw,
_rtl88e_enable_fw_download(hw, false);
err = _rtl88e_fw_free_to_go(hw);
- if (err) {
+ if (err)
pr_err("Firmware is not ready to run!\n");
- } else {
- RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD,
- "Firmware is ready to run!\n");
- }
return 0;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192c/fw_common.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192c/fw_common.c
index 5c93ee0..eb4459c 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192c/fw_common.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192c/fw_common.c
@@ -237,12 +237,8 @@ int rtl92c_download_fw(struct ieee80211_hw *hw)
_rtl92c_enable_fw_download(hw, false);
err = _rtl92c_fw_free_to_go(hw);
- if (err) {
+ if (err)
pr_err("Firmware is not ready to run!\n");
- } else {
- RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
- "Firmware is ready to run!\n");
- }
return 0;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c
index 5b33bed..e647605 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c
@@ -125,9 +125,8 @@ static void _rtl92d_write_fw(struct ieee80211_hw *hw,
_rtl92d_fill_dummy(bufferPtr, &size);
pagenums = size / FW_8192D_PAGE_SIZE;
remainSize = size % FW_8192D_PAGE_SIZE;
- if (pagenums > 8) {
+ if (pagenums > 8)
pr_err("Page numbers should not greater then 8\n");
- }
for (page = 0; page < pagenums; page++) {
offset = page * FW_8192D_PAGE_SIZE;
_rtl92d_fw_page_write(hw, page, (bufferPtr + offset),
@@ -155,8 +154,6 @@ static int _rtl92d_fw_free_to_go(struct ieee80211_hw *hw)
pr_err("chksum report fail! REG_MCUFWDL:0x%08x\n", value32);
return -EIO;
}
- RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
- "Checksum report OK ! REG_MCUFWDL:0x%08x\n", value32);
value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
value32 |= MCUFWDL_RDY;
rtl_write_dword(rtlpriv, REG_MCUFWDL, value32);
@@ -323,12 +320,9 @@ int rtl92d_download_fw(struct ieee80211_hw *hw)
value &= (~BIT(5));
rtl_write_byte(rtlpriv, 0x1f, value);
spin_unlock_irqrestore(&globalmutex_for_fwdownload, flags);
- if (err) {
+ if (err)
pr_err("fw is not ready to run!\n");
goto exit;
- } else {
- RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE, "fw is ready to run!\n");
- }
exit:
err = _rtl92d_fw_init(hw);
return err;
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/fw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/fw.c
index 2959746..e05b181 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/fw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/fw.c
@@ -157,10 +157,6 @@ static int _rtl92ee_fw_free_to_go(struct ieee80211_hw *hw)
value32);
goto exit;
}
-
- RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
- "Checksum report OK! REG_MCUFWDL:0x%08x\n", value32);
-
value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
value32 |= MCUFWDL_RDY;
value32 &= ~WINTINI_RDY;
@@ -171,13 +167,8 @@ static int _rtl92ee_fw_free_to_go(struct ieee80211_hw *hw)
do {
value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
- if (value32 & WINTINI_RDY) {
- RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD ,
- "Polling FW ready success!! REG_MCUFWDL:0x%08x. count = %d\n",
- value32, counter);
- err = 0;
- goto exit;
- }
+ if (value32 & WINTINI_RDY)
+ return 0;
udelay(FW_8192C_POLLING_DELAY*10);
@@ -236,12 +227,6 @@ int rtl92ee_download_fw(struct ieee80211_hw *hw, bool buse_wake_on_wlan_fw)
_rtl92ee_enable_fw_download(hw, false);
err = _rtl92ee_fw_free_to_go(hw);
- if (err) {
- pr_err("Firmware is not ready to run!\n");
- } else {
- RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD ,
- "Firmware is ready to run!\n");
- }
return 0;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723com/fw_common.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723com/fw_common.c
index a9cc67e..a040e6b 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723com/fw_common.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723com/fw_common.c
@@ -212,9 +212,6 @@ int rtl8723_fw_free_to_go(struct ieee80211_hw *hw, bool is_8723be,
value32);
goto exit;
}
- RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
- "Checksum report OK ! REG_MCUFWDL:0x%08x .\n", value32);
-
value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL) | MCUFWDL_RDY;
value32 &= ~WINTINI_RDY;
rtl_write_dword(rtlpriv, REG_MCUFWDL, value32);
@@ -290,12 +287,8 @@ int rtl8723_download_fw(struct ieee80211_hw *hw,
rtl8723_enable_fw_download(hw, false);
err = rtl8723_fw_free_to_go(hw, is_8723be, max_count);
- if (err) {
+ if (err)
pr_err("Firmware is not ready to run!\n");
- } else {
- RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
- "Firmware is ready to run!\n");
- }
return 0;
}
EXPORT_SYMBOL_GPL(rtl8723_download_fw);
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/fw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/fw.c
index 536c12a..4f17140 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/fw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/fw.c
@@ -124,9 +124,8 @@ static void _rtl8821ae_write_fw(struct ieee80211_hw *hw,
pagenums = size / FW_8821AE_PAGE_SIZE;
remainsize = size % FW_8821AE_PAGE_SIZE;
- if (pagenums > 8) {
+ if (pagenums > 8)
pr_err("Page numbers should not greater then 8\n");
- }
for (page = 0; page < pagenums; page++) {
offset = page * FW_8821AE_PAGE_SIZE;
@@ -160,9 +159,6 @@ static int _rtl8821ae_fw_free_to_go(struct ieee80211_hw *hw)
value32);
goto exit;
}
-
- pr_err("Checksum report OK ! REG_MCUFWDL:0x%08x .\n", value32);
-
value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
value32 |= MCUFWDL_RDY;
value32 &= ~WINTINI_RDY;
@@ -173,13 +169,8 @@ static int _rtl8821ae_fw_free_to_go(struct ieee80211_hw *hw)
counter = 0;
do {
value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
- if (value32 & WINTINI_RDY) {
- RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD,
- "Polling FW ready success!! REG_MCUFWDL:0x%08x .\n",
- value32);
- err = 0;
- goto exit;
- }
+ if (value32 & WINTINI_RDY)
+ return 0;
udelay(FW_8821AE_POLLING_DELAY);
} while (counter++ < FW_8821AE_POLLING_TIMEOUT_COUNT);
--
2.10.2
^ permalink raw reply related
* [PATCH 13/14] rtlwifi: rtl8188ee: Remove all instances of DBG_EMERG
From: Larry Finger @ 2016-12-11 5:45 UTC (permalink / raw)
To: kvalo; +Cc: devel, linux-wireless, Larry Finger, Ping-Ke Shih
In-Reply-To: <20161211054523.7119-1-Larry.Finger@lwfinger.net>
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
---
.../net/wireless/realtek/rtlwifi/rtl8188ee/fw.c | 33 ++++++----------------
.../net/wireless/realtek/rtlwifi/rtl8188ee/hw.c | 30 ++++++++------------
.../net/wireless/realtek/rtlwifi/rtl8188ee/phy.c | 22 ++++++---------
.../net/wireless/realtek/rtlwifi/rtl8188ee/rf.c | 3 +-
.../net/wireless/realtek/rtlwifi/rtl8188ee/sw.c | 8 ++----
5 files changed, 33 insertions(+), 63 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/fw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/fw.c
index c34cde2..009fd3b 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/fw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/fw.c
@@ -125,10 +125,8 @@ static void _rtl88e_write_fw(struct ieee80211_hw *hw,
pagenums = size / FW_8192C_PAGE_SIZE;
remainsize = size % FW_8192C_PAGE_SIZE;
- if (pagenums > 8) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Page numbers should not greater then 8\n");
- }
+ if (pagenums > 8)
+ pr_err("rtl8188ee: Page numbers should not greater then 8\n");
for (page = 0; page < pagenums; page++) {
offset = page * FW_8192C_PAGE_SIZE;
@@ -157,15 +155,10 @@ static int _rtl88e_fw_free_to_go(struct ieee80211_hw *hw)
(!(value32 & FWDL_CHKSUM_RPT)));
if (counter >= FW_8192C_POLLING_TIMEOUT_COUNT) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "chksum report faill ! REG_MCUFWDL:0x%08x .\n",
- value32);
+ pr_err("rtl8188ee: chksum report fail! REG_MCUFWDL:0x%08x .\n",
+ value32);
goto exit;
}
-
- RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
- "Checksum report OK ! REG_MCUFWDL:0x%08x .\n", value32);
-
value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
value32 |= MCUFWDL_RDY;
value32 &= ~WINTINI_RDY;
@@ -176,20 +169,15 @@ static int _rtl88e_fw_free_to_go(struct ieee80211_hw *hw)
do {
value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
- if (value32 & WINTINI_RDY) {
- RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
- "Polling FW ready success!! REG_MCUFWDL:0x%08x.\n",
- value32);
- err = 0;
- goto exit;
- }
+ if (value32 & WINTINI_RDY)
+ return 0;
udelay(FW_8192C_POLLING_DELAY);
} while (counter++ < FW_8192C_POLLING_TIMEOUT_COUNT);
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Polling FW ready fail!! REG_MCUFWDL:0x%08x .\n", value32);
+ pr_err("rtl8188ee: Polling FW ready fail!! REG_MCUFWDL:0x%08x .\n",
+ value32);
exit:
return err;
@@ -235,8 +222,7 @@ int rtl88e_download_fw(struct ieee80211_hw *hw,
err = _rtl88e_fw_free_to_go(hw);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Firmware is not ready to run!\n");
+ pr_err("rtl8188ee: Firmware is not ready to run!\n");
} else {
RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD,
"Firmware is ready to run!\n");
@@ -309,8 +295,7 @@ static void _rtl88e_fill_h2c_command(struct ieee80211_hw *hw,
while (!write_sucess) {
wait_writeh2c_limit--;
if (wait_writeh2c_limit == 0) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Write H2C fail because no trigger for FW INT!\n");
+ pr_err("rtl8188ee: Write H2C fail because no trigger for FW INT!\n");
break;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c
index d85fa67..6aa593d 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c
@@ -358,8 +358,7 @@ void rtl88ee_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
case HAL_DEF_WOWLAN:
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", variable);
+ pr_err("rtl8188ee: switch case %#x not processed\n", variable);
break;
}
}
@@ -572,9 +571,8 @@ void rtl88ee_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
acm_ctrl &= (~ACMHW_VOQEN);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n",
- e_aci);
+ pr_err("rtl8188ee: switch case %#x not processed\n",
+ e_aci);
break;
}
}
@@ -737,8 +735,7 @@ void rtl88ee_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
2, array);
break; }
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", variable);
+ pr_err("rtl8188ee: switch case %#x not processed\n", variable);
break;
}
}
@@ -759,9 +756,8 @@ static bool _rtl88ee_llt_write(struct ieee80211_hw *hw, u32 address, u32 data)
break;
if (count > POLLING_LLT_THRESHOLD) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to polling write LLT done at address %d!\n",
- address);
+ pr_err("rtl8188ee: Failed to polling write LLT done at address %d!\n",
+ address);
status = false;
break;
}
@@ -1096,7 +1092,7 @@ int rtl88ee_hw_init(struct ieee80211_hw *hw)
rtstatus = _rtl88ee_init_mac(hw);
if (rtstatus != true) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Init MAC failed\n");
+ pr_info("Init MAC failed\n");
err = 1;
goto exit;
}
@@ -1252,8 +1248,7 @@ static int _rtl88ee_set_media_status(struct ieee80211_hw *hw,
"Set Network type to AP!\n");
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Network type %d not support!\n", type);
+ pr_err("rtl8188ee: Network type %d not support!\n", type);
return 1;
break;
}
@@ -1987,7 +1982,7 @@ void rtl88ee_read_eeprom_info(struct ieee80211_hw *hw)
rtlefuse->autoload_failflag = false;
_rtl88ee_read_adapter_info(hw);
} else {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Autoload ERR!!\n");
+ pr_err("rtl8188ee: Autoload ERR!!\n");
}
_rtl88ee_hal_customized_behavior(hw);
}
@@ -2354,8 +2349,8 @@ void rtl88ee_set_key(struct ieee80211_hw *hw, u32 key_index,
enc_algo = CAM_AES;
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", enc_algo);
+ pr_err("rtl8188ee: switch case %#x not processed\n",
+ enc_algo);
enc_algo = CAM_TKIP;
break;
}
@@ -2373,9 +2367,7 @@ void rtl88ee_set_key(struct ieee80211_hw *hw, u32 key_index,
entry_id =
rtl_cam_get_free_entry(hw, p_macaddr);
if (entry_id >= TOTAL_CAM_ENTRY) {
- RT_TRACE(rtlpriv, COMP_SEC,
- DBG_EMERG,
- "Can not find free hw security cam entry\n");
+ pr_err("rtl8188ee: Can not find free hw security cam entry\n");
return;
}
} else {
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c
index 870d8202..925a43f 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c
@@ -176,7 +176,7 @@ static u32 _rtl88e_phy_rf_serial_read(struct ieee80211_hw *hw,
offset &= 0xff;
newoffset = offset;
if (RT_CANNOT_IO(hw)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "return all one\n");
+ pr_err("rtl8188ee: return all one\n");
return 0xFFFFFFFF;
}
tmplong = rtl_get_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD);
@@ -220,7 +220,7 @@ static void _rtl88e_phy_rf_serial_write(struct ieee80211_hw *hw,
struct bb_reg_def *pphyreg = &rtlphy->phyreg_def[rfpath];
if (RT_CANNOT_IO(hw)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "stop\n");
+ pr_err("rtl8188ee: stop\n");
return;
}
offset &= 0xff;
@@ -373,7 +373,7 @@ static bool _rtl88e_phy_bb8188e_config_parafile(struct ieee80211_hw *hw)
rtstatus = phy_config_bb_with_headerfile(hw, BASEBAND_CONFIG_PHY_REG);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Write BB Reg Fail!!\n");
+ pr_err("rtl8188ee: Write BB Reg Fail!!\n");
return false;
}
@@ -383,13 +383,13 @@ static bool _rtl88e_phy_bb8188e_config_parafile(struct ieee80211_hw *hw)
phy_config_bb_with_pghdr(hw, BASEBAND_CONFIG_PHY_REG);
}
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "BB_PG Reg Fail!!\n");
+ pr_err("rtl8188ee: BB_PG Reg Fail!!\n");
return false;
}
rtstatus =
phy_config_bb_with_headerfile(hw, BASEBAND_CONFIG_AGC_TAB);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "AGC Table Fail\n");
+ pr_err("rtl8188ee: AGC Table Fail\n");
return false;
}
rtlphy->cck_high_power =
@@ -1095,8 +1095,7 @@ void rtl88e_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation)
(u8 *)&iotype);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Unknown Scan Backup operation.\n");
+ pr_err("rtl8188ee: Unknown Scan Backup operation.\n");
break;
}
}
@@ -1137,8 +1136,8 @@ void rtl88e_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_prsr_rsc);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("rtl8188ee: unknown bandwidth: %#X\n",
+ rtlphy->current_chan_bw);
break;
}
@@ -1162,8 +1160,8 @@ void rtl88e_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
HAL_PRIME_CHNL_OFFSET_LOWER) ? 2 : 1);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("rtl8188ee: unknown bandwidth: %#X\n",
+ rtlphy->current_chan_bw);
break;
}
rtl88e_phy_rf6052_set_bandwidth(hw, rtlphy->current_chan_bw);
@@ -1303,8 +1300,8 @@ static bool _rtl88e_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw,
currentcmd = &postcommoncmd[*step];
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Invalid 'stage' = %d, Check it!\n", *stage);
+ pr_err("rtl8188ee: Invalid 'stage' = %d, Check it!\n",
+ *stage);
return true;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/rf.c b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/rf.c
index 26ac4c2..30798b1 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/rf.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/rf.c
@@ -51,8 +51,7 @@ void rtl88e_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
rtlphy->rfreg_chnlval[0]);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", bandwidth);
+ pr_err("rtl8188ee: unknown bandwidth: %#X\n", bandwidth);
break;
}
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/sw.c
index f361808..276c745 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/sw.c
@@ -165,8 +165,7 @@ int rtl88e_init_sw_vars(struct ieee80211_hw *hw)
/* for firmware buf */
rtlpriv->rtlhal.pfirmware = vzalloc(0x8000);
if (!rtlpriv->rtlhal.pfirmware) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Can't alloc buffer for fw.\n");
+ pr_info("Can't alloc buffer for fw.\n");
return 1;
}
@@ -177,8 +176,7 @@ int rtl88e_init_sw_vars(struct ieee80211_hw *hw)
rtlpriv->io.dev, GFP_KERNEL, hw,
rtl_fw_cb);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to request firmware!\n");
+ pr_info("Failed to request firmware!\n");
return 1;
}
@@ -278,7 +276,7 @@ static struct rtl_mod_params rtl88ee_mod_params = {
.swctrl_lps = false,
.fwctrl_lps = false,
.msi_support = true,
- .debug = DBG_EMERG,
+ .debug = 0,
};
static const struct rtl_hal_cfg rtl88ee_hal_cfg = {
--
2.10.2
^ permalink raw reply related
* [PATCH 12/14] rtlwifi: rtl8192c-common: Remove all instances of DBG_EMERG
From: Larry Finger @ 2016-12-11 5:45 UTC (permalink / raw)
To: kvalo; +Cc: devel, linux-wireless, Larry Finger, Ping-Ke Shih
In-Reply-To: <20161211054523.7119-1-Larry.Finger@lwfinger.net>
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
---
.../wireless/realtek/rtlwifi/rtl8192c/fw_common.c | 33 ++++++----------------
.../wireless/realtek/rtlwifi/rtl8192c/phy_common.c | 13 ++++-----
2 files changed, 15 insertions(+), 31 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192c/fw_common.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192c/fw_common.c
index 4a49e66..e739e56 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192c/fw_common.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192c/fw_common.c
@@ -145,10 +145,8 @@ static void _rtl92c_write_fw(struct ieee80211_hw *hw,
pageNums = size / FW_8192C_PAGE_SIZE;
remainsize = size % FW_8192C_PAGE_SIZE;
- if (pageNums > 4) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Page numbers should not greater then 4\n");
- }
+ if (pageNums > 4)
+ pr_err("rtl8192c-common: Page numbers should not greater then 4\n");
for (page = 0; page < pageNums; page++) {
offset = page * FW_8192C_PAGE_SIZE;
@@ -180,15 +178,10 @@ static int _rtl92c_fw_free_to_go(struct ieee80211_hw *hw)
(!(value32 & FWDL_ChkSum_rpt)));
if (counter >= FW_8192C_POLLING_TIMEOUT_COUNT) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "chksum report faill ! REG_MCUFWDL:0x%08x .\n",
- value32);
+ pr_err("rtl8192c-common: chksum report fail! REG_MCUFWDL:0x%08x .\n",
+ value32);
goto exit;
}
-
- RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
- "Checksum report OK ! REG_MCUFWDL:0x%08x .\n", value32);
-
value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
value32 |= MCUFWDL_RDY;
value32 &= ~WINTINI_RDY;
@@ -198,20 +191,15 @@ static int _rtl92c_fw_free_to_go(struct ieee80211_hw *hw)
do {
value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
- if (value32 & WINTINI_RDY) {
- RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
- "Polling FW ready success!! REG_MCUFWDL:0x%08x .\n",
- value32);
- err = 0;
- goto exit;
- }
+ if (value32 & WINTINI_RDY)
+ return 0;
mdelay(FW_8192C_POLLING_DELAY);
} while (counter++ < FW_8192C_POLLING_TIMEOUT_COUNT);
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Polling FW ready fail!! REG_MCUFWDL:0x%08x .\n", value32);
+ pr_err("rtl8192c-common: Polling FW ready fail! REG_MCUFWDL:0x%08x.\n",
+ value32);
exit:
return err;
@@ -251,8 +238,7 @@ int rtl92c_download_fw(struct ieee80211_hw *hw)
err = _rtl92c_fw_free_to_go(hw);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Firmware is not ready to run!\n");
+ pr_err("rtl8192c-common: Firmware is not ready to run!\n");
} else {
RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
"Firmware is ready to run!\n");
@@ -327,8 +313,7 @@ static void _rtl92c_fill_h2c_command(struct ieee80211_hw *hw,
while (!bwrite_sucess) {
wait_writeh2c_limmit--;
if (wait_writeh2c_limmit == 0) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Write H2C fail because no trigger for FW INT!\n");
+ pr_err("rtl8192c-common: Write H2C fail because no trigger for FW INT!\n");
break;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c
index 30c2d12..5f8fa4a 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c
@@ -104,7 +104,7 @@ u32 _rtl92c_phy_rf_serial_read(struct ieee80211_hw *hw,
offset &= 0x3f;
newoffset = offset;
if (RT_CANNOT_IO(hw)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "return all one\n");
+ pr_err("rtl8192c-common: return all one\n");
return 0xFFFFFFFF;
}
tmplong = rtl_get_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD);
@@ -152,7 +152,7 @@ void _rtl92c_phy_rf_serial_write(struct ieee80211_hw *hw,
struct bb_reg_def *pphyreg = &rtlphy->phyreg_def[rfpath];
if (RT_CANNOT_IO(hw)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "stop\n");
+ pr_err("rtl8192c-common: stop\n");
return;
}
offset &= 0x3f;
@@ -209,7 +209,7 @@ bool _rtl92c_phy_bb8192c_config_parafile(struct ieee80211_hw *hw)
rtstatus = rtlpriv->cfg->ops->config_bb_with_headerfile(hw,
BASEBAND_CONFIG_PHY_REG);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Write BB Reg Fail!!\n");
+ pr_err("rtl8192c-common: Write BB Reg Fail!!\n");
return false;
}
if (rtlphy->rf_type == RF_1T2R) {
@@ -222,13 +222,13 @@ bool _rtl92c_phy_bb8192c_config_parafile(struct ieee80211_hw *hw)
BASEBAND_CONFIG_PHY_REG);
}
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "BB_PG Reg Fail!!\n");
+ pr_err("rtl8192c-common: BB_PG Reg Fail!!\n");
return false;
}
rtstatus = rtlpriv->cfg->ops->config_bb_with_headerfile(hw,
BASEBAND_CONFIG_AGC_TAB);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "AGC Table Fail\n");
+ pr_err("rtl8192c-common: AGC Table Fail\n");
return false;
}
rtlphy->cck_high_power =
@@ -860,8 +860,8 @@ bool _rtl92c_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw,
currentcmd = &postcommoncmd[*step];
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Invalid 'stage' = %d, Check it!\n", *stage);
+ pr_err("rtl8192c-common: Invalid 'stage' = %d, Check it!\n",
+ *stage);
return true;
}
--
2.10.2
^ permalink raw reply related
* [PATCH 13/14] rtlwifi_new: rtl8188ee: Remove all instances of DBG_EMERG
From: Larry Finger @ 2016-12-11 5:45 UTC (permalink / raw)
To: kvalo; +Cc: devel, linux-wireless, Larry Finger, Ping-Ke Shih
In-Reply-To: <20161211054523.7119-1-Larry.Finger@lwfinger.net>
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
---
.../net/wireless/realtek/rtlwifi/rtl8188ee/fw.c | 33 ++++++----------------
.../net/wireless/realtek/rtlwifi/rtl8188ee/hw.c | 30 ++++++++------------
.../net/wireless/realtek/rtlwifi/rtl8188ee/phy.c | 22 ++++++---------
.../net/wireless/realtek/rtlwifi/rtl8188ee/rf.c | 3 +-
.../net/wireless/realtek/rtlwifi/rtl8188ee/sw.c | 8 ++----
5 files changed, 33 insertions(+), 63 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/fw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/fw.c
index fbd3eea..3ba2a3f 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/fw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/fw.c
@@ -125,10 +125,8 @@ static void _rtl88e_write_fw(struct ieee80211_hw *hw,
pagenums = size / FW_8192C_PAGE_SIZE;
remainsize = size % FW_8192C_PAGE_SIZE;
- if (pagenums > 8) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Page numbers should not greater then 8\n");
- }
+ if (pagenums > 8)
+ pr_err("Page numbers should not greater then 8\n");
for (page = 0; page < pagenums; page++) {
offset = page * FW_8192C_PAGE_SIZE;
@@ -157,15 +155,10 @@ static int _rtl88e_fw_free_to_go(struct ieee80211_hw *hw)
(!(value32 & FWDL_CHKSUM_RPT)));
if (counter >= FW_8192C_POLLING_TIMEOUT_COUNT) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "chksum report faill ! REG_MCUFWDL:0x%08x .\n",
- value32);
+ pr_err("chksum report fail! REG_MCUFWDL:0x%08x .\n",
+ value32);
goto exit;
}
-
- RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
- "Checksum report OK ! REG_MCUFWDL:0x%08x .\n", value32);
-
value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
value32 |= MCUFWDL_RDY;
value32 &= ~WINTINI_RDY;
@@ -176,20 +169,14 @@ static int _rtl88e_fw_free_to_go(struct ieee80211_hw *hw)
do {
value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
- if (value32 & WINTINI_RDY) {
- RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
- "Polling FW ready success!! REG_MCUFWDL:0x%08x.\n",
- value32);
- err = 0;
- goto exit;
- }
+ if (value32 & WINTINI_RDY)
+ return 0;
udelay(FW_8192C_POLLING_DELAY);
} while (counter++ < FW_8192C_POLLING_TIMEOUT_COUNT);
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Polling FW ready fail!! REG_MCUFWDL:0x%08x .\n", value32);
+ pr_err("Polling FW ready fail!! REG_MCUFWDL:0x%08x .\n", value32);
exit:
return err;
@@ -235,8 +222,7 @@ int rtl88e_download_fw(struct ieee80211_hw *hw,
err = _rtl88e_fw_free_to_go(hw);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Firmware is not ready to run!\n");
+ pr_err("Firmware is not ready to run!\n");
} else {
RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD,
"Firmware is ready to run!\n");
@@ -309,8 +295,7 @@ static void _rtl88e_fill_h2c_command(struct ieee80211_hw *hw,
while (!write_sucess) {
wait_writeh2c_limit--;
if (wait_writeh2c_limit == 0) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Write H2C fail because no trigger for FW INT!\n");
+ pr_err("Write H2C fail because no trigger for FW INT!\n");
break;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c
index 1a17dfe..0dc1293 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c
@@ -358,8 +358,7 @@ void rtl88ee_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
case HAL_DEF_WOWLAN:
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", variable);
+ pr_err("switch case %#x not processed\n", variable);
break;
}
}
@@ -572,9 +571,8 @@ void rtl88ee_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
acm_ctrl &= (~ACMHW_VOQEN);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n",
- e_aci);
+ pr_err("switch case %#x not processed\n",
+ e_aci);
break;
}
}
@@ -737,8 +735,7 @@ void rtl88ee_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
2, array);
break; }
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", variable);
+ pr_err("switch case %#x not processed\n", variable);
break;
}
}
@@ -759,9 +756,8 @@ static bool _rtl88ee_llt_write(struct ieee80211_hw *hw, u32 address, u32 data)
break;
if (count > POLLING_LLT_THRESHOLD) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to polling write LLT done at address %d!\n",
- address);
+ pr_err("Failed to polling write LLT done at address %d!\n",
+ address);
status = false;
break;
}
@@ -1096,7 +1092,7 @@ int rtl88ee_hw_init(struct ieee80211_hw *hw)
rtstatus = _rtl88ee_init_mac(hw);
if (rtstatus != true) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Init MAC failed\n");
+ pr_info("Init MAC failed\n");
err = 1;
goto exit;
}
@@ -1252,8 +1248,7 @@ static int _rtl88ee_set_media_status(struct ieee80211_hw *hw,
"Set Network type to AP!\n");
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Network type %d not support!\n", type);
+ pr_err("Network type %d not support!\n", type);
return 1;
break;
}
@@ -1987,7 +1982,7 @@ void rtl88ee_read_eeprom_info(struct ieee80211_hw *hw)
rtlefuse->autoload_failflag = false;
_rtl88ee_read_adapter_info(hw);
} else {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Autoload ERR!!\n");
+ pr_err("Autoload ERR!!\n");
}
_rtl88ee_hal_customized_behavior(hw);
}
@@ -2354,8 +2349,7 @@ void rtl88ee_set_key(struct ieee80211_hw *hw, u32 key_index,
enc_algo = CAM_AES;
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", enc_algo);
+ pr_err("switch case %#x not processed\n", enc_algo);
enc_algo = CAM_TKIP;
break;
}
@@ -2373,9 +2367,7 @@ void rtl88ee_set_key(struct ieee80211_hw *hw, u32 key_index,
entry_id =
rtl_cam_get_free_entry(hw, p_macaddr);
if (entry_id >= TOTAL_CAM_ENTRY) {
- RT_TRACE(rtlpriv, COMP_SEC,
- DBG_EMERG,
- "Can not find free hw security cam entry\n");
+ pr_err("Can not find free hw security cam entry\n");
return;
}
} else {
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c
index ece8691..c6d6a16 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c
@@ -176,7 +176,7 @@ static u32 _rtl88e_phy_rf_serial_read(struct ieee80211_hw *hw,
offset &= 0xff;
newoffset = offset;
if (RT_CANNOT_IO(hw)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "return all one\n");
+ pr_err("return all one\n");
return 0xFFFFFFFF;
}
tmplong = rtl_get_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD);
@@ -220,7 +220,7 @@ static void _rtl88e_phy_rf_serial_write(struct ieee80211_hw *hw,
struct bb_reg_def *pphyreg = &rtlphy->phyreg_def[rfpath];
if (RT_CANNOT_IO(hw)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "stop\n");
+ pr_err("stop\n");
return;
}
offset &= 0xff;
@@ -373,7 +373,7 @@ static bool _rtl88e_phy_bb8188e_config_parafile(struct ieee80211_hw *hw)
rtstatus = phy_config_bb_with_headerfile(hw, BASEBAND_CONFIG_PHY_REG);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Write BB Reg Fail!!\n");
+ pr_err("Write BB Reg Fail!!\n");
return false;
}
@@ -383,13 +383,13 @@ static bool _rtl88e_phy_bb8188e_config_parafile(struct ieee80211_hw *hw)
phy_config_bb_with_pghdr(hw, BASEBAND_CONFIG_PHY_REG);
}
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "BB_PG Reg Fail!!\n");
+ pr_err("BB_PG Reg Fail!!\n");
return false;
}
rtstatus =
phy_config_bb_with_headerfile(hw, BASEBAND_CONFIG_AGC_TAB);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "AGC Table Fail\n");
+ pr_err("AGC Table Fail\n");
return false;
}
rtlphy->cck_high_power =
@@ -1095,8 +1095,7 @@ void rtl88e_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation)
(u8 *)&iotype);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Unknown Scan Backup operation.\n");
+ pr_err("Unknown Scan Backup operation.\n");
break;
}
}
@@ -1137,8 +1136,7 @@ void rtl88e_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_prsr_rsc);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
break;
}
@@ -1162,8 +1160,7 @@ void rtl88e_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
HAL_PRIME_CHNL_OFFSET_LOWER) ? 2 : 1);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
break;
}
rtl88e_phy_rf6052_set_bandwidth(hw, rtlphy->current_chan_bw);
@@ -1303,8 +1300,7 @@ static bool _rtl88e_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw,
currentcmd = &postcommoncmd[*step];
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Invalid 'stage' = %d, Check it!\n", *stage);
+ pr_err("Invalid 'stage' = %d, Check it!\n", *stage);
return true;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/rf.c b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/rf.c
index 26ac4c2..30798b1 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/rf.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/rf.c
@@ -51,8 +51,7 @@ void rtl88e_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
rtlphy->rfreg_chnlval[0]);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", bandwidth);
+ pr_err("unknown bandwidth: %#X\n", bandwidth);
break;
}
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/sw.c
index f361808..276c745 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/sw.c
@@ -165,8 +165,7 @@ int rtl88e_init_sw_vars(struct ieee80211_hw *hw)
/* for firmware buf */
rtlpriv->rtlhal.pfirmware = vzalloc(0x8000);
if (!rtlpriv->rtlhal.pfirmware) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Can't alloc buffer for fw.\n");
+ pr_info("Can't alloc buffer for fw.\n");
return 1;
}
@@ -177,8 +176,7 @@ int rtl88e_init_sw_vars(struct ieee80211_hw *hw)
rtlpriv->io.dev, GFP_KERNEL, hw,
rtl_fw_cb);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to request firmware!\n");
+ pr_info("Failed to request firmware!\n");
return 1;
}
@@ -278,7 +276,7 @@ static struct rtl_mod_params rtl88ee_mod_params = {
.swctrl_lps = false,
.fwctrl_lps = false,
.msi_support = true,
- .debug = DBG_EMERG,
+ .debug = 0,
};
static const struct rtl_hal_cfg rtl88ee_hal_cfg = {
--
2.10.2
^ permalink raw reply related
* [PATCH 12/14] rtlwifi_new: rtl8192c-common: Remove all instances of DBG_EMERG
From: Larry Finger @ 2016-12-11 5:45 UTC (permalink / raw)
To: kvalo; +Cc: devel, linux-wireless, Larry Finger, Ping-Ke Shih
In-Reply-To: <20161211054523.7119-1-Larry.Finger@lwfinger.net>
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
---
.../wireless/realtek/rtlwifi/rtl8192c/fw_common.c | 33 ++++++----------------
.../wireless/realtek/rtlwifi/rtl8192c/phy_common.c | 13 ++++-----
2 files changed, 15 insertions(+), 31 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192c/fw_common.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192c/fw_common.c
index 54fcf5a..5c93ee0 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192c/fw_common.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192c/fw_common.c
@@ -145,10 +145,8 @@ static void _rtl92c_write_fw(struct ieee80211_hw *hw,
pageNums = size / FW_8192C_PAGE_SIZE;
remainsize = size % FW_8192C_PAGE_SIZE;
- if (pageNums > 4) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Page numbers should not greater then 4\n");
- }
+ if (pageNums > 4)
+ pr_err("Page numbers should not greater then 4\n");
for (page = 0; page < pageNums; page++) {
offset = page * FW_8192C_PAGE_SIZE;
@@ -180,15 +178,10 @@ static int _rtl92c_fw_free_to_go(struct ieee80211_hw *hw)
(!(value32 & FWDL_ChkSum_rpt)));
if (counter >= FW_8192C_POLLING_TIMEOUT_COUNT) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "chksum report faill ! REG_MCUFWDL:0x%08x .\n",
- value32);
+ pr_err("chksum report fail! REG_MCUFWDL:0x%08x .\n",
+ value32);
goto exit;
}
-
- RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
- "Checksum report OK ! REG_MCUFWDL:0x%08x .\n", value32);
-
value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
value32 |= MCUFWDL_RDY;
value32 &= ~WINTINI_RDY;
@@ -198,20 +191,14 @@ static int _rtl92c_fw_free_to_go(struct ieee80211_hw *hw)
do {
value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
- if (value32 & WINTINI_RDY) {
- RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
- "Polling FW ready success!! REG_MCUFWDL:0x%08x .\n",
- value32);
- err = 0;
- goto exit;
- }
+ if (value32 & WINTINI_RDY)
+ return 0;
mdelay(FW_8192C_POLLING_DELAY);
} while (counter++ < FW_8192C_POLLING_TIMEOUT_COUNT);
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Polling FW ready fail!! REG_MCUFWDL:0x%08x .\n", value32);
+ pr_err("Polling FW ready fail!! REG_MCUFWDL:0x%08x .\n", value32);
exit:
return err;
@@ -251,8 +238,7 @@ int rtl92c_download_fw(struct ieee80211_hw *hw)
err = _rtl92c_fw_free_to_go(hw);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Firmware is not ready to run!\n");
+ pr_err("Firmware is not ready to run!\n");
} else {
RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
"Firmware is ready to run!\n");
@@ -327,8 +313,7 @@ static void _rtl92c_fill_h2c_command(struct ieee80211_hw *hw,
while (!bwrite_sucess) {
wait_writeh2c_limmit--;
if (wait_writeh2c_limmit == 0) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Write H2C fail because no trigger for FW INT!\n");
+ pr_err("Write H2C fail because no trigger for FW INT!\n");
break;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c
index 32fc4b6..fb0ce16 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c
@@ -104,7 +104,7 @@ u32 _rtl92c_phy_rf_serial_read(struct ieee80211_hw *hw,
offset &= 0x3f;
newoffset = offset;
if (RT_CANNOT_IO(hw)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "return all one\n");
+ pr_err("return all one\n");
return 0xFFFFFFFF;
}
tmplong = rtl_get_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD);
@@ -152,7 +152,7 @@ void _rtl92c_phy_rf_serial_write(struct ieee80211_hw *hw,
struct bb_reg_def *pphyreg = &rtlphy->phyreg_def[rfpath];
if (RT_CANNOT_IO(hw)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "stop\n");
+ pr_err("stop\n");
return;
}
offset &= 0x3f;
@@ -209,7 +209,7 @@ bool _rtl92c_phy_bb8192c_config_parafile(struct ieee80211_hw *hw)
rtstatus = rtlpriv->cfg->ops->config_bb_with_headerfile(hw,
BASEBAND_CONFIG_PHY_REG);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Write BB Reg Fail!!\n");
+ pr_err("Write BB Reg Fail!!\n");
return false;
}
if (rtlphy->rf_type == RF_1T2R) {
@@ -222,13 +222,13 @@ bool _rtl92c_phy_bb8192c_config_parafile(struct ieee80211_hw *hw)
BASEBAND_CONFIG_PHY_REG);
}
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "BB_PG Reg Fail!!\n");
+ pr_err("BB_PG Reg Fail!!\n");
return false;
}
rtstatus = rtlpriv->cfg->ops->config_bb_with_headerfile(hw,
BASEBAND_CONFIG_AGC_TAB);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "AGC Table Fail\n");
+ pr_err("AGC Table Fail\n");
return false;
}
rtlphy->cck_high_power =
@@ -860,8 +860,7 @@ bool _rtl92c_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw,
currentcmd = &postcommoncmd[*step];
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Invalid 'stage' = %d, Check it!\n", *stage);
+ pr_err("Invalid 'stage' = %d, Check it!\n", *stage);
return true;
}
--
2.10.2
^ permalink raw reply related
* [PATCH 11/14] rtlwifi: rtl8192ce: Remove all instances of DBG_EMERG
From: Larry Finger @ 2016-12-11 5:45 UTC (permalink / raw)
To: kvalo; +Cc: devel, linux-wireless, Larry Finger, Ping-Ke Shih
In-Reply-To: <20161211054523.7119-1-Larry.Finger@lwfinger.net>
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
---
.../net/wireless/realtek/rtlwifi/rtl8192ce/hw.c | 36 ++++++++--------------
.../net/wireless/realtek/rtlwifi/rtl8192ce/led.c | 6 ++--
.../net/wireless/realtek/rtlwifi/rtl8192ce/phy.c | 13 +++-----
.../net/wireless/realtek/rtlwifi/rtl8192ce/rf.c | 3 +-
.../net/wireless/realtek/rtlwifi/rtl8192ce/sw.c | 8 ++---
5 files changed, 24 insertions(+), 42 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c
index ce07e5c..410d48bf 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c
@@ -140,8 +140,7 @@ void rtl92ce_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
case HAL_DEF_WOWLAN:
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", variable);
+ pr_err("rtl8192ce: switch case %#x not processed\n", variable);
break;
}
}
@@ -364,9 +363,8 @@ void rtl92ce_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
acm_ctrl &= (~AcmHw_VoqEn);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n",
- e_aci);
+ pr_err("rtl8192ce: switch case %#x not processed\n",
+ e_aci);
break;
}
}
@@ -551,8 +549,7 @@ void rtl92ce_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
rtl92c_fill_h2c_cmd(hw, H2C_92C_KEEP_ALIVE_CTRL, 2, array);
break; }
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %d not processed\n", variable);
+ pr_err("rtl8192ce: switch case %d not processed\n", variable);
break;
}
}
@@ -573,9 +570,8 @@ static bool _rtl92ce_llt_write(struct ieee80211_hw *hw, u32 address, u32 data)
break;
if (count > POLLING_LLT_THRESHOLD) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to polling write LLT done at address %d!\n",
- address);
+ pr_err("rtl8192ce: Failed to polling write LLT done at address %d!\n",
+ address);
status = false;
break;
}
@@ -963,7 +959,7 @@ int rtl92ce_hw_init(struct ieee80211_hw *hw)
rtlpriv->intf_ops->disable_aspm(hw);
rtstatus = _rtl92ce_init_mac(hw);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Init MAC failed\n");
+ pr_err("rtl8192ce: Init MAC failed\n");
err = 1;
goto exit;
}
@@ -1128,8 +1124,7 @@ static enum version_8192c _rtl92ce_read_chip_version(struct ieee80211_hw *hw)
break;
}
- RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
- "Chip Version ID: %s\n", versionid);
+ pr_info("Chip Version ID: %s\n", versionid);
switch (version & 0x3) {
case CHIP_88C:
@@ -1143,8 +1138,7 @@ static enum version_8192c _rtl92ce_read_chip_version(struct ieee80211_hw *hw)
break;
default:
rtlphy->rf_type = RF_1T1R;
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "ERROR RF_Type is set!!\n");
+ pr_err("rtl8192ce: ERROR RF_Type is set!!\n");
break;
}
@@ -1193,8 +1187,7 @@ static int _rtl92ce_set_media_status(struct ieee80211_hw *hw,
"Set Network type to Mesh Point!\n");
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Network type %d not supported!\n", type);
+ pr_err("rtl8192ce: Network type %d not supported!\n", type);
return 1;
}
@@ -1780,7 +1773,7 @@ void rtl92ce_read_eeprom_info(struct ieee80211_hw *hw)
rtlefuse->autoload_failflag = false;
_rtl92ce_read_adapter_info(hw);
} else {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Autoload ERR!!\n");
+ pr_err("rtl8192ce: Autoload ERR!!\n");
}
_rtl92ce_hal_customized_behavior(hw);
}
@@ -2152,8 +2145,8 @@ void rtl92ce_set_key(struct ieee80211_hw *hw, u32 key_index,
enc_algo = CAM_AES;
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", enc_algo);
+ pr_err("rtl8192ce: switch case %#x not processed\n",
+ enc_algo);
enc_algo = CAM_TKIP;
break;
}
@@ -2171,9 +2163,7 @@ void rtl92ce_set_key(struct ieee80211_hw *hw, u32 key_index,
entry_id = rtl_cam_get_free_entry(hw,
p_macaddr);
if (entry_id >= TOTAL_CAM_ENTRY) {
- RT_TRACE(rtlpriv, COMP_SEC,
- DBG_EMERG,
- "Can not find free hw security cam entry\n");
+ pr_err("rtl8192ce: Can not find free hw security cam entry\n");
return;
}
} else {
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/led.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/led.c
index 833193b..b9d40be 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/led.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/led.c
@@ -57,8 +57,8 @@ void rtl92ce_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled)
rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg & 0x0f) | BIT(5));
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", pled->ledpin);
+ pr_err("rtl8192ce: switch case %#x not processed\n",
+ pled->ledpin);
break;
}
pled->ledon = true;
@@ -92,8 +91,7 @@ void rtl92ce_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled)
rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg | BIT(3)));
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", pled->ledpin);
+ pr_info("switch case %#x not processed\n", pled->ledpin);
break;
}
pled->ledon = false;
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/phy.c
index d1b6a8f..4b67358 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/phy.c
@@ -297,10 +297,10 @@ bool rtl92c_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
break;
case RF90_PATH_C:
case RF90_PATH_D:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", rfpath);
+ pr_info("Incorrect rfpath %#x\n", rfpath);
break;
default:
+ pr_info("switch case %#x not processed\n", rfpath);
break;
}
return true;
@@ -340,8 +340,7 @@ void rtl92ce_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_prsr_rsc);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_info("unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
break;
}
@@ -365,8 +364,8 @@ void rtl92ce_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
HAL_PRIME_CHNL_OFFSET_LOWER) ? 2 : 1);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("rtl8192ce: unknown bandwidth: %#X\n",
+ rtlphy->current_chan_bw);
break;
}
rtl92ce_phy_rf6052_set_bandwidth(hw, rtlphy->current_chan_bw);
@@ -546,8 +544,8 @@ static bool _rtl92ce_phy_set_rf_power_state(struct ieee80211_hw *hw,
break;
}
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", rfpwr_state);
+ pr_err("rtl8192ce: switch case %#x not processed\n",
+ rfpwr_state);
bresult = false;
break;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/rf.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/rf.c
index 7cae635..e68ed7f 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/rf.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/rf.c
@@ -51,8 +51,7 @@ void rtl92ce_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
rtlphy->rfreg_chnlval[0]);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", bandwidth);
+ pr_err("rtl8192ce: unknown bandwidth: %#X\n", bandwidth);
break;
}
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/sw.c
index 691ddef..9bd2bff6 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/sw.c
@@ -158,8 +158,7 @@ int rtl92c_init_sw_vars(struct ieee80211_hw *hw)
/* for firmware buf */
rtlpriv->rtlhal.pfirmware = vzalloc(0x4000);
if (!rtlpriv->rtlhal.pfirmware) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Can't alloc buffer for fw\n");
+ pr_err("rtl8192ce: Can't alloc buffer for fw\n");
return 1;
}
@@ -173,8 +172,7 @@ int rtl92c_init_sw_vars(struct ieee80211_hw *hw)
rtlpriv->io.dev, GFP_KERNEL, hw,
rtl_fw_cb);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to request firmware!\n");
+ pr_err("rtl8192ce: Failed to request firmware!\n");
return 1;
}
@@ -249,7 +247,7 @@ static struct rtl_mod_params rtl92ce_mod_params = {
.inactiveps = true,
.swctrl_lps = false,
.fwctrl_lps = true,
- .debug = DBG_EMERG,
+ .debug = 0,
};
static const struct rtl_hal_cfg rtl92ce_hal_cfg = {
--
2.10.2
^ permalink raw reply related
* [PATCH 11/14] rtlwifi_new: rtl8192ce: Remove all instances of DBG_EMERG
From: Larry Finger @ 2016-12-11 5:45 UTC (permalink / raw)
To: kvalo; +Cc: devel, linux-wireless, Larry Finger, Ping-Ke Shih
In-Reply-To: <20161211054523.7119-1-Larry.Finger@lwfinger.net>
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
---
.../net/wireless/realtek/rtlwifi/rtl8192ce/hw.c | 36 ++++++++--------------
.../net/wireless/realtek/rtlwifi/rtl8192ce/led.c | 6 ++--
.../net/wireless/realtek/rtlwifi/rtl8192ce/phy.c | 13 +++-----
.../net/wireless/realtek/rtlwifi/rtl8192ce/rf.c | 3 +-
.../net/wireless/realtek/rtlwifi/rtl8192ce/sw.c | 8 ++---
5 files changed, 24 insertions(+), 42 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c
index b757a74..7ed33c2 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c
@@ -140,8 +140,7 @@ void rtl92ce_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
case HAL_DEF_WOWLAN:
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", variable);
+ pr_err("switch case %#x not processed\n", variable);
break;
}
}
@@ -364,9 +363,8 @@ void rtl92ce_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
acm_ctrl &= (~AcmHw_VoqEn);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n",
- e_aci);
+ pr_err("switch case %#x not processed\n",
+ e_aci);
break;
}
}
@@ -551,8 +549,7 @@ void rtl92ce_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
rtl92c_fill_h2c_cmd(hw, H2C_92C_KEEP_ALIVE_CTRL, 2, array);
break; }
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %d not processed\n", variable);
+ pr_err("switch case %d not processed\n", variable);
break;
}
}
@@ -573,9 +570,8 @@ static bool _rtl92ce_llt_write(struct ieee80211_hw *hw, u32 address, u32 data)
break;
if (count > POLLING_LLT_THRESHOLD) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to polling write LLT done at address %d!\n",
- address);
+ pr_err("Failed to polling write LLT done at address %d!\n",
+ address);
status = false;
break;
}
@@ -963,7 +959,7 @@ int rtl92ce_hw_init(struct ieee80211_hw *hw)
rtlpriv->intf_ops->disable_aspm(hw);
rtstatus = _rtl92ce_init_mac(hw);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Init MAC failed\n");
+ pr_err("Init MAC failed\n");
err = 1;
goto exit;
}
@@ -1128,8 +1124,7 @@ static enum version_8192c _rtl92ce_read_chip_version(struct ieee80211_hw *hw)
break;
}
- RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
- "Chip Version ID: %s\n", versionid);
+ pr_info("Chip Version ID: %s\n", versionid);
switch (version & 0x3) {
case CHIP_88C:
@@ -1143,8 +1138,7 @@ static enum version_8192c _rtl92ce_read_chip_version(struct ieee80211_hw *hw)
break;
default:
rtlphy->rf_type = RF_1T1R;
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "ERROR RF_Type is set!!\n");
+ pr_err("ERROR RF_Type is set!!\n");
break;
}
@@ -1193,8 +1187,7 @@ static int _rtl92ce_set_media_status(struct ieee80211_hw *hw,
"Set Network type to Mesh Point!\n");
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Network type %d not supported!\n", type);
+ pr_err("Network type %d not supported!\n", type);
return 1;
}
@@ -1780,7 +1773,7 @@ void rtl92ce_read_eeprom_info(struct ieee80211_hw *hw)
rtlefuse->autoload_failflag = false;
_rtl92ce_read_adapter_info(hw);
} else {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Autoload ERR!!\n");
+ pr_err("Autoload ERR!!\n");
}
_rtl92ce_hal_customized_behavior(hw);
}
@@ -2152,8 +2145,7 @@ void rtl92ce_set_key(struct ieee80211_hw *hw, u32 key_index,
enc_algo = CAM_AES;
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", enc_algo);
+ pr_err("switch case %#x not processed\n", enc_algo);
enc_algo = CAM_TKIP;
break;
}
@@ -2171,9 +2163,7 @@ void rtl92ce_set_key(struct ieee80211_hw *hw, u32 key_index,
entry_id = rtl_cam_get_free_entry(hw,
p_macaddr);
if (entry_id >= TOTAL_CAM_ENTRY) {
- RT_TRACE(rtlpriv, COMP_SEC,
- DBG_EMERG,
- "Can not find free hw security cam entry\n");
+ pr_err("Can not find free hw security cam entry\n");
return;
}
} else {
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/led.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/led.c
index 833193b..b9d40be 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/led.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/led.c
@@ -57,8 +57,7 @@ void rtl92ce_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled)
rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg & 0x0f) | BIT(5));
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", pled->ledpin);
+ pr_err("switch case %#x not processed\n", pled->ledpin);
break;
}
pled->ledon = true;
@@ -92,8 +91,7 @@ void rtl92ce_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled)
rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg | BIT(3)));
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", pled->ledpin);
+ pr_info("switch case %#x not processed\n", pled->ledpin);
break;
}
pled->ledon = false;
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/phy.c
index d1b6a8f..4b67358 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/phy.c
@@ -297,10 +297,10 @@ bool rtl92c_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
break;
case RF90_PATH_C:
case RF90_PATH_D:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", rfpath);
+ pr_info("Incorrect rfpath %#x\n", rfpath);
break;
default:
+ pr_info("switch case %#x not processed\n", rfpath);
break;
}
return true;
@@ -340,8 +340,7 @@ void rtl92ce_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_prsr_rsc);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_info("unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
break;
}
@@ -365,8 +364,7 @@ void rtl92ce_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
HAL_PRIME_CHNL_OFFSET_LOWER) ? 2 : 1);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
break;
}
rtl92ce_phy_rf6052_set_bandwidth(hw, rtlphy->current_chan_bw);
@@ -546,8 +544,7 @@ static bool _rtl92ce_phy_set_rf_power_state(struct ieee80211_hw *hw,
break;
}
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", rfpwr_state);
+ pr_err("switch case %#x not processed\n", rfpwr_state);
bresult = false;
break;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/rf.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/rf.c
index 7cae635..e68ed7f 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/rf.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/rf.c
@@ -51,8 +51,7 @@ void rtl92ce_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
rtlphy->rfreg_chnlval[0]);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", bandwidth);
+ pr_err("unknown bandwidth: %#X\n", bandwidth);
break;
}
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/sw.c
index 691ddef..9bd2bff6 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/sw.c
@@ -158,8 +158,7 @@ int rtl92c_init_sw_vars(struct ieee80211_hw *hw)
/* for firmware buf */
rtlpriv->rtlhal.pfirmware = vzalloc(0x4000);
if (!rtlpriv->rtlhal.pfirmware) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Can't alloc buffer for fw\n");
+ pr_err("Can't alloc buffer for fw\n");
return 1;
}
@@ -173,8 +172,7 @@ int rtl92c_init_sw_vars(struct ieee80211_hw *hw)
rtlpriv->io.dev, GFP_KERNEL, hw,
rtl_fw_cb);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to request firmware!\n");
+ pr_err("Failed to request firmware!\n");
return 1;
}
@@ -249,7 +247,7 @@ static struct rtl_mod_params rtl92ce_mod_params = {
.inactiveps = true,
.swctrl_lps = false,
.fwctrl_lps = true,
- .debug = DBG_EMERG,
+ .debug = 0,
};
static const struct rtl_hal_cfg rtl92ce_hal_cfg = {
--
2.10.2
^ permalink raw reply related
* [PATCH 10/14] rtlwifi: rtl8192cu: Remove all instances of DBG_EMERG
From: Larry Finger @ 2016-12-11 5:45 UTC (permalink / raw)
To: kvalo; +Cc: devel, linux-wireless, Larry Finger, Ping-Ke Shih
In-Reply-To: <20161211054523.7119-1-Larry.Finger@lwfinger.net>
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
---
.../net/wireless/realtek/rtlwifi/rtl8192cu/hw.c | 33 ++++++++--------------
.../net/wireless/realtek/rtlwifi/rtl8192cu/led.c | 6 ++--
.../net/wireless/realtek/rtlwifi/rtl8192cu/mac.c | 12 +++-----
.../net/wireless/realtek/rtlwifi/rtl8192cu/phy.c | 12 +++-----
.../net/wireless/realtek/rtlwifi/rtl8192cu/rf.c | 3 +-
.../net/wireless/realtek/rtlwifi/rtl8192cu/sw.c | 5 ++--
6 files changed, 24 insertions(+), 47 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c
index aa3d559..dce13d6 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c
@@ -452,8 +452,7 @@ static int _rtl92cu_init_power_on(struct ieee80211_hw *hw)
break;
}
if (pollingCount++ > 100) {
- RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
- "Failed to polling REG_APS_FSMCO[PFM_ALDN] done!\n");
+ pr_err("rtl8192cu: Failed to polling REG_APS_FSMCO[PFM_ALDN] done!\n");
return -ENODEV;
}
} while (true);
@@ -486,8 +485,7 @@ static int _rtl92cu_init_power_on(struct ieee80211_hw *hw)
break;
}
if (pollingCount++ > 1000) {
- RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
- "Failed to polling REG_APS_FSMCO[APFM_ONMAC] done!\n");
+ pr_err("rtl8192cu: Failed to polling REG_APS_FSMCO[APFM_ONMAC] done!\n");
return -ENODEV;
}
} while (true);
@@ -687,7 +685,6 @@ static void _rtl92cu_init_chipN_three_out_ep_priority(struct ieee80211_hw *hw,
u8 queue_sel)
{
u16 beQ, bkQ, viQ, voQ, mgtQ, hiQ;
- struct rtl_priv *rtlpriv = rtl_priv(hw);
if (!wmm_enable) { /* typical setting */
beQ = QUEUE_LOW;
@@ -705,8 +702,7 @@ static void _rtl92cu_init_chipN_three_out_ep_priority(struct ieee80211_hw *hw,
hiQ = QUEUE_HIGH;
}
_rtl92c_init_chipN_reg_priority(hw, beQ, bkQ, viQ, voQ, mgtQ, hiQ);
- RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "Tx queue select :0x%02x..\n",
- queue_sel);
+ pr_info("Tx queue select :0x%02x..\n", queue_sel);
}
static void _rtl92cu_init_chipN_queue_priority(struct ieee80211_hw *hw,
@@ -765,8 +761,7 @@ static void _rtl92cu_init_chipT_queue_priority(struct ieee80211_hw *hw,
break;
}
rtl_write_byte(rtlpriv, (REG_TRXDMA_CTRL+1), hq_sele);
- RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "Tx queue select :0x%02x..\n",
- hq_sele);
+ pr_info("Tx queue select :0x%02x..\n", hq_sele);
}
static void _rtl92cu_init_queue_priority(struct ieee80211_hw *hw,
@@ -848,8 +843,7 @@ static int _rtl92cu_init_mac(struct ieee80211_hw *hw)
err = _rtl92cu_init_power_on(hw);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to init power on!\n");
+ pr_err("rtl8192cu: Failed to init power on!\n");
return err;
}
if (!wmm_enable) {
@@ -860,8 +854,7 @@ static int _rtl92cu_init_mac(struct ieee80211_hw *hw)
: WMM_CHIP_A_TX_PAGE_BOUNDARY;
}
if (false == rtl92c_init_llt_table(hw, boundary)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to init LLT Table!\n");
+ pr_err("rtl8192cu: Failed to init LLT Table!\n");
return -EINVAL;
}
_rtl92cu_init_queue_reserved_page(hw, wmm_enable, out_ep_nums,
@@ -986,7 +979,7 @@ int rtl92cu_hw_init(struct ieee80211_hw *hw)
rtlhal->hw_type = HARDWARE_TYPE_RTL8192CU;
err = _rtl92cu_init_mac(hw);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "init mac failed!\n");
+ pr_err("rtl8192cu: init mac failed!\n");
goto exit;
}
err = rtl92c_download_fw(hw);
@@ -1099,8 +1092,7 @@ static void _ResetDigitalProcedure1(struct ieee80211_hw *hw, bool bWithoutHWSM)
udelay(50);
}
if (retry_cnts >= 100) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "#####=> 8051 reset failed!.........................\n");
+ pr_err("rtl8192cu: 8051 reset failed!.........................\n");
/* if 8051 reset fail, reset MAC. */
rtl_write_byte(rtlpriv,
REG_SYS_FUNC_EN + 1,
@@ -1340,8 +1332,7 @@ static int _rtl92cu_set_media_status(struct ieee80211_hw *hw,
"Set Network type to AP!\n");
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Network type %d not supported!\n", type);
+ pr_err("rtl8192cu: Network type %d not supported!\n", type);
goto error_out;
}
rtl_write_byte(rtlpriv, MSR, bt_msr);
@@ -1555,8 +1546,7 @@ void rtl92cu_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
case HAL_DEF_WOWLAN:
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", variable);
+ pr_err("rtl8192cu: switch case %#x not processed\n", variable);
break;
}
}
@@ -1926,8 +1916,7 @@ void rtl92cu_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
break;
}
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", variable);
+ pr_err("rtl8192cu: switch case %#x not processed\n", variable);
break;
}
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/led.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/led.c
index c624081..9d83f08 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/led.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/led.c
@@ -57,8 +57,8 @@ void rtl92cu_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled)
rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg & 0x0f) | BIT(5));
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", pled->ledpin);
+ pr_err("rtl8192cu: switch case %#x not processed\n",
+ pled->ledpin);
break;
}
pled->ledon = true;
@@ -90,8 +89,8 @@ void rtl92cu_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled)
rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg | BIT(3)));
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", pled->ledpin);
+ pr_err("rtl8192cu: switch case %#x not processed\n",
+ pled->ledpin);
break;
}
pled->ledon = false;
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c
index cf212f6..1b124ea 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c
@@ -157,9 +157,8 @@ bool rtl92c_llt_write(struct ieee80211_hw *hw, u32 address, u32 data)
if (_LLT_NO_ACTIVE == _LLT_OP_VALUE(value))
break;
if (count > POLLING_LLT_THRESHOLD) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to polling write LLT done at address %d! _LLT_OP_VALUE(%x)\n",
- address, _LLT_OP_VALUE(value));
+ pr_err("rtl8192cu: Failed to polling write LLT done at address %d! _LLT_OP_VALUE(%x)\n",
+ address, _LLT_OP_VALUE(value));
status = false;
break;
}
@@ -262,8 +261,7 @@ void rtl92c_set_key(struct ieee80211_hw *hw, u32 key_index,
enc_algo = CAM_AES;
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "illegal switch case\n");
+ pr_err("rtl8192cu: illegal switch case\n");
enc_algo = CAM_TKIP;
break;
}
@@ -280,9 +278,7 @@ void rtl92c_set_key(struct ieee80211_hw *hw, u32 key_index,
entry_id = rtl_cam_get_free_entry(hw,
p_macaddr);
if (entry_id >= TOTAL_CAM_ENTRY) {
- RT_TRACE(rtlpriv, COMP_SEC,
- DBG_EMERG,
- "Can not find free hw security cam entry\n");
+ pr_err("rtl8192cu: Can not find free hw security cam entry\n");
return;
}
} else {
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/phy.c
index f35f435..452437f 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/phy.c
@@ -274,8 +274,7 @@ bool rtl92cu_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
break;
case RF90_PATH_C:
case RF90_PATH_D:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", rfpath);
+ pr_err("rtl8192cu: switch case %#x not processed\n", rfpath);
break;
default:
break;
@@ -314,8 +313,8 @@ void rtl92cu_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_prsr_rsc);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("rtl8192cu: unknown bandwidth: %#X\n",
+ rtlphy->current_chan_bw);
break;
}
switch (rtlphy->current_chan_bw) {
@@ -336,8 +334,8 @@ void rtl92cu_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
HAL_PRIME_CHNL_OFFSET_LOWER) ? 2 : 1);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("rtl8192cu: unknown bandwidth: %#X\n",
+ rtlphy->current_chan_bw);
break;
}
rtl92cu_phy_rf6052_set_bandwidth(hw, rtlphy->current_chan_bw);
@@ -509,8 +506,8 @@ static bool _rtl92cu_phy_set_rf_power_state(struct ieee80211_hw *hw,
_rtl92c_phy_set_rf_sleep(hw);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", rfpwr_state);
+ pr_err("rtl8192cu: switch case %#x not processed\n",
+ rfpwr_state);
bresult = false;
break;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/rf.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/rf.c
index 5e31830..9cff6bc 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/rf.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/rf.c
@@ -51,8 +51,7 @@ void rtl92cu_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
rtlphy->rfreg_chnlval[0]);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", bandwidth);
+ pr_err("rtl8192cu: unknown bandwidth: %#X\n", bandwidth);
break;
}
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/sw.c
index b84e13a..935e830 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/sw.c
@@ -68,8 +68,7 @@ static int rtl92cu_init_sw_vars(struct ieee80211_hw *hw)
/* for firmware buf */
rtlpriv->rtlhal.pfirmware = vzalloc(0x4000);
if (!rtlpriv->rtlhal.pfirmware) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Can't alloc buffer for fw\n");
+ pr_err("rtl8192cu: Can't alloc buffer for fw\n");
return 1;
}
if (IS_VENDOR_UMC_A_CUT(rtlpriv->rtlhal.version) &&
@@ -158,7 +157,7 @@ static struct rtl_hal_ops rtl8192cu_hal_ops = {
static struct rtl_mod_params rtl92cu_mod_params = {
.sw_crypto = 0,
- .debug = DBG_EMERG,
+ .debug = 0,
};
module_param_named(swenc, rtl92cu_mod_params.sw_crypto, bool, 0444);
--
2.10.2
^ permalink raw reply related
* [PATCH 09/14] rtlwifi: rtl8192de: Remove all instances of DBG_EMERG
From: Larry Finger @ 2016-12-11 5:45 UTC (permalink / raw)
To: kvalo; +Cc: devel, linux-wireless, Larry Finger, Ping-Ke Shih
In-Reply-To: <20161211054523.7119-1-Larry.Finger@lwfinger.net>
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
---
.../net/wireless/realtek/rtlwifi/rtl8192de/fw.c | 19 ++++--------
.../net/wireless/realtek/rtlwifi/rtl8192de/hw.c | 34 ++++++++--------------
.../net/wireless/realtek/rtlwifi/rtl8192de/led.c | 6 ++--
.../net/wireless/realtek/rtlwifi/rtl8192de/phy.c | 31 ++++++++------------
.../net/wireless/realtek/rtlwifi/rtl8192de/rf.c | 3 +-
.../net/wireless/realtek/rtlwifi/rtl8192de/sw.c | 8 ++---
6 files changed, 36 insertions(+), 65 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c
index ddbb7e8..ed6aba0 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c
@@ -126,8 +126,7 @@ static void _rtl92d_write_fw(struct ieee80211_hw *hw,
pagenums = size / FW_8192D_PAGE_SIZE;
remainSize = size % FW_8192D_PAGE_SIZE;
if (pagenums > 8) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Page numbers should not greater then 8\n");
+ pr_err("rtl8192de: Page numbers should not greater then 8\n");
}
for (page = 0; page < pagenums; page++) {
offset = page * FW_8192D_PAGE_SIZE;
@@ -153,9 +152,8 @@ static int _rtl92d_fw_free_to_go(struct ieee80211_hw *hw)
} while ((counter++ < FW_8192D_POLLING_TIMEOUT_COUNT) &&
(!(value32 & FWDL_ChkSum_rpt)));
if (counter >= FW_8192D_POLLING_TIMEOUT_COUNT) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "chksum report faill ! REG_MCUFWDL:0x%08x\n",
- value32);
+ pr_err("rtl8192de: chksum report fail! REG_MCUFWDL:0x%08x\n",
+ value32);
return -EIO;
}
RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
@@ -327,8 +324,7 @@ int rtl92d_download_fw(struct ieee80211_hw *hw)
rtl_write_byte(rtlpriv, 0x1f, value);
spin_unlock_irqrestore(&globalmutex_for_fwdownload, flags);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "fw is not ready to run!\n");
+ pr_err("rtl8192de: fw is not ready to run!\n");
goto exit;
} else {
RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE, "fw is ready to run!\n");
@@ -407,8 +403,7 @@ static void _rtl92d_fill_h2c_command(struct ieee80211_hw *hw,
while (!bwrite_success) {
wait_writeh2c_limmit--;
if (wait_writeh2c_limmit == 0) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Write H2C fail because no trigger for FW INT!\n");
+ pr_err("rtl8192de: Write H2C fail because no trigger for FW INT!\n");
break;
}
boxnum = rtlhal->last_hmeboxnum;
@@ -430,8 +425,8 @@ static void _rtl92d_fill_h2c_command(struct ieee80211_hw *hw,
box_extreg = REG_HMEBOX_EXT_3;
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", boxnum);
+ pr_err("rtl8192de: switch case %#x not processed\n",
+ boxnum);
break;
}
isfw_read = _rtl92d_check_fw_read_last_h2c(hw, boxnum);
@@ -507,8 +501,8 @@ static void _rtl92d_fill_h2c_command(struct ieee80211_hw *hw,
boxcontent[idx]);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", cmd_len);
+ pr_err("rtl8192de: switch case %#x not processed\n",
+ cmd_len);
break;
}
bwrite_success = true;
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c
index fcb14c5..2c92c33 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c
@@ -163,8 +163,7 @@ void rtl92de_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
case HAL_DEF_WOWLAN:
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", variable);
+ pr_err("rtl8192de: switch case %#x not processed\n", variable);
break;
}
}
@@ -358,9 +357,8 @@ void rtl92de_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
acm_ctrl &= (~ACMHW_VOQEN);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n",
- e_aci);
+ pr_err("rtl8192de: switch case %#x not processed\n",
+ e_aci);
break;
}
}
@@ -500,8 +498,7 @@ void rtl92de_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
break;
}
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", variable);
+ pr_err("rtl8192de: switch case %#x not processed\n", variable);
break;
}
}
@@ -520,9 +517,8 @@ static bool _rtl92de_llt_write(struct ieee80211_hw *hw, u32 address, u32 data)
if (_LLT_NO_ACTIVE == _LLT_OP_VALUE(value))
break;
if (count > POLLING_LLT_THRESHOLD) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to polling write LLT done at address %d!\n",
- address);
+ pr_err("rtl8192de: Failed to polling write LLT done at address %d!\n",
+ address);
status = false;
break;
}
@@ -920,7 +916,7 @@ int rtl92de_hw_init(struct ieee80211_hw *hw)
/* rtlpriv->intf_ops->disable_aspm(hw); */
rtstatus = _rtl92de_init_mac(hw);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Init MAC failed\n");
+ pr_err("rtl8192de: Init MAC failed\n");
err = 1;
spin_unlock_irqrestore(&globalmutex_for_power_and_efuse, flags);
return err;
@@ -1119,11 +1115,8 @@ static int _rtl92de_set_media_status(struct ieee80211_hw *hw,
"Set Network type to AP!\n");
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Network type %d not supported!\n", type);
+ pr_err("rtl8192de: Network type %d not supported!\n", type);
return 1;
- break;
-
}
rtl_write_byte(rtlpriv, MSR, bt_msr);
rtlpriv->cfg->ops->led_control(hw, ledaction);
@@ -1732,7 +1725,7 @@ static void _rtl92de_efuse_update_chip_version(struct ieee80211_hw *hw)
break;
default:
chipver |= CHIP_92D_D_CUT;
- RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "Unknown CUT!\n");
+ pr_err("rtl8192de: Unknown CUT!\n");
break;
}
rtlpriv->rtlhal.version = chipver;
@@ -1816,7 +1809,7 @@ void rtl92de_read_eeprom_info(struct ieee80211_hw *hw)
rtlefuse->autoload_failflag = false;
_rtl92de_read_adapter_info(hw);
} else {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Autoload ERR!!\n");
+ pr_err("rtl8192de: Autoload ERR!!\n");
}
return;
}
@@ -2169,8 +2162,8 @@ void rtl92de_set_key(struct ieee80211_hw *hw, u32 key_index,
enc_algo = CAM_AES;
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", enc_algo);
+ pr_err("rtl8192de: switch case %#x not processed\n",
+ enc_algo);
enc_algo = CAM_TKIP;
break;
}
@@ -2186,9 +2178,7 @@ void rtl92de_set_key(struct ieee80211_hw *hw, u32 key_index,
entry_id = rtl_cam_get_free_entry(hw,
p_macaddr);
if (entry_id >= TOTAL_CAM_ENTRY) {
- RT_TRACE(rtlpriv, COMP_SEC,
- DBG_EMERG,
- "Can not find free hw security cam entry\n");
+ pr_err("rtl8192de: Can not find free hw security cam entry\n");
return;
}
} else {
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/led.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/led.c
index c22b8a2..58ec4fc 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/led.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/led.c
@@ -66,8 +66,8 @@ void rtl92de_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled)
rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg & 0x0f) | BIT(5));
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", pled->ledpin);
+ pr_err("rtl8192de: switch case %#x not processed\n",
+ pled->ledpin);
break;
}
pled->ledon = true;
@@ -101,8 +100,8 @@ void rtl92de_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled)
rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg | BIT(3)));
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", pled->ledpin);
+ pr_err("rtl8192de: switch case %#x not processed\n",
+ pled->ledpin);
break;
}
pled->ledon = false;
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c
index fbd127b..90a3443 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c
@@ -716,7 +716,7 @@ static bool _rtl92d_phy_bb_config(struct ieee80211_hw *hw)
rtstatus = _rtl92d_phy_config_bb_with_headerfile(hw,
BASEBAND_CONFIG_PHY_REG);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Write BB Reg Fail!!\n");
+ pr_err("rtl8192de: Write BB Reg Fail!!\n");
return false;
}
@@ -731,13 +731,13 @@ static bool _rtl92d_phy_bb_config(struct ieee80211_hw *hw)
BASEBAND_CONFIG_PHY_REG);
}
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "BB_PG Reg Fail!!\n");
+ pr_err("rtl8192de: BB_PG Reg Fail!!\n");
return false;
}
rtstatus = _rtl92d_phy_config_bb_with_headerfile(hw,
BASEBAND_CONFIG_AGC_TAB);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "AGC Table Fail\n");
+ pr_err("rtl8192de: AGC Table Fail\n");
return false;
}
rtlphy->cck_high_power = (bool) (rtl_get_bbreg(hw,
@@ -833,8 +833,7 @@ bool rtl92d_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
break;
case RF90_PATH_C:
case RF90_PATH_D:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", rfpath);
+ pr_err("rtl8192de: switch case %#x not processed\n", rfpath);
break;
}
return true;
@@ -987,8 +986,8 @@ void rtl92d_phy_set_bw_mode(struct ieee80211_hw *hw,
rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_prsr_rsc);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("rtl8192de: unknown bandwidth: %#X\n",
+ rtlphy->current_chan_bw);
break;
}
switch (rtlphy->current_chan_bw) {
@@ -1019,8 +1017,8 @@ void rtl92d_phy_set_bw_mode(struct ieee80211_hw *hw,
HAL_PRIME_CHNL_OFFSET_LOWER) ? 2 : 1);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("rtl8192de: unknown bandwidth: %#X\n",
+ rtlphy->current_chan_bw);
break;
}
@@ -2842,9 +2839,8 @@ static bool _rtl92d_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw,
rtl92d_phy_reload_iqk_setting(hw, channel);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n",
- currentcmd->cmdid);
+ pr_err("rtl8192de: switch case %#x not processed\n",
+ currentcmd->cmdid);
break;
}
break;
@@ -2956,9 +2952,8 @@ static void rtl92d_phy_set_io(struct ieee80211_hw *hw)
rtl92d_dm_write_dig(hw);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n",
- rtlphy->current_io_type);
+ pr_err("rtl8192de: switch case %#x not processed\n",
+ rtlphy->current_io_type);
break;
}
rtlphy->set_io_inprogress = false;
@@ -2988,8 +2983,8 @@ bool rtl92d_phy_set_io_cmd(struct ieee80211_hw *hw, enum io_type iotype)
postprocessing = true;
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", iotype);
+ pr_err("rtl8192de: switch case %#x not processed\n",
+ iotype);
break;
}
} while (false);
@@ -3176,8 +3170,8 @@ bool rtl92d_phy_set_rf_power_state(struct ieee80211_hw *hw,
_rtl92d_phy_set_rfsleep(hw);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", rfpwr_state);
+ pr_err("rtl8192de: switch case %#x not processed\n",
+ rfpwr_state);
bresult = false;
break;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/rf.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/rf.c
index 9dc9e91..021d3c5 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/rf.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/rf.c
@@ -63,8 +63,7 @@ void rtl92d_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
}
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", bandwidth);
+ pr_err("rtl8192de: unknown bandwidth: %#X\n", bandwidth);
break;
}
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/sw.c
index 63e942b..0fb014e 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/sw.c
@@ -171,8 +171,7 @@ static int rtl92d_init_sw_vars(struct ieee80211_hw *hw)
/* for firmware buf */
rtlpriv->rtlhal.pfirmware = vzalloc(0x8000);
if (!rtlpriv->rtlhal.pfirmware) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Can't alloc buffer for fw\n");
+ pr_err("rtl8192de: Can't alloc buffer for fw\n");
return 1;
}
@@ -185,8 +184,7 @@ static int rtl92d_init_sw_vars(struct ieee80211_hw *hw)
rtlpriv->io.dev, GFP_KERNEL, hw,
rtl_fw_cb);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to request firmware!\n");
+ pr_err("rtl8192de: Failed to request firmware!\n");
return 1;
}
@@ -256,7 +254,7 @@ static struct rtl_mod_params rtl92de_mod_params = {
.inactiveps = true,
.swctrl_lps = true,
.fwctrl_lps = false,
- .debug = DBG_EMERG,
+ .debug = 0,
};
static const struct rtl_hal_cfg rtl92de_hal_cfg = {
--
2.10.2
^ permalink raw reply related
* [PATCH 10/14] rtlwifi_new: rtl8192cu: Remove all instances of DBG_EMERG
From: Larry Finger @ 2016-12-11 5:45 UTC (permalink / raw)
To: kvalo; +Cc: devel, linux-wireless, Larry Finger, Ping-Ke Shih
In-Reply-To: <20161211054523.7119-1-Larry.Finger@lwfinger.net>
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
---
.../net/wireless/realtek/rtlwifi/rtl8192cu/hw.c | 33 ++++++++--------------
.../net/wireless/realtek/rtlwifi/rtl8192cu/led.c | 6 ++--
.../net/wireless/realtek/rtlwifi/rtl8192cu/mac.c | 12 +++-----
.../net/wireless/realtek/rtlwifi/rtl8192cu/phy.c | 12 +++-----
.../net/wireless/realtek/rtlwifi/rtl8192cu/rf.c | 3 +-
.../net/wireless/realtek/rtlwifi/rtl8192cu/sw.c | 5 ++--
6 files changed, 24 insertions(+), 47 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c
index ddfcf994..9db6ec6 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c
@@ -452,8 +452,7 @@ static int _rtl92cu_init_power_on(struct ieee80211_hw *hw)
break;
}
if (pollingCount++ > 100) {
- RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
- "Failed to polling REG_APS_FSMCO[PFM_ALDN] done!\n");
+ pr_err("Failed to polling REG_APS_FSMCO[PFM_ALDN] done!\n");
return -ENODEV;
}
} while (true);
@@ -486,8 +485,7 @@ static int _rtl92cu_init_power_on(struct ieee80211_hw *hw)
break;
}
if (pollingCount++ > 1000) {
- RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
- "Failed to polling REG_APS_FSMCO[APFM_ONMAC] done!\n");
+ pr_err("Failed to polling REG_APS_FSMCO[APFM_ONMAC] done!\n");
return -ENODEV;
}
} while (true);
@@ -687,7 +685,6 @@ static void _rtl92cu_init_chipN_three_out_ep_priority(struct ieee80211_hw *hw,
u8 queue_sel)
{
u16 beQ, bkQ, viQ, voQ, mgtQ, hiQ;
- struct rtl_priv *rtlpriv = rtl_priv(hw);
if (!wmm_enable) { /* typical setting */
beQ = QUEUE_LOW;
@@ -705,8 +702,7 @@ static void _rtl92cu_init_chipN_three_out_ep_priority(struct ieee80211_hw *hw,
hiQ = QUEUE_HIGH;
}
_rtl92c_init_chipN_reg_priority(hw, beQ, bkQ, viQ, voQ, mgtQ, hiQ);
- RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "Tx queue select :0x%02x..\n",
- queue_sel);
+ pr_info("Tx queue select :0x%02x..\n", queue_sel);
}
static void _rtl92cu_init_chipN_queue_priority(struct ieee80211_hw *hw,
@@ -765,8 +761,7 @@ static void _rtl92cu_init_chipT_queue_priority(struct ieee80211_hw *hw,
break;
}
rtl_write_byte(rtlpriv, (REG_TRXDMA_CTRL+1), hq_sele);
- RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "Tx queue select :0x%02x..\n",
- hq_sele);
+ pr_info("Tx queue select :0x%02x..\n", hq_sele);
}
static void _rtl92cu_init_queue_priority(struct ieee80211_hw *hw,
@@ -848,8 +843,7 @@ static int _rtl92cu_init_mac(struct ieee80211_hw *hw)
err = _rtl92cu_init_power_on(hw);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to init power on!\n");
+ pr_err("Failed to init power on!\n");
return err;
}
if (!wmm_enable) {
@@ -860,8 +854,7 @@ static int _rtl92cu_init_mac(struct ieee80211_hw *hw)
: WMM_CHIP_A_TX_PAGE_BOUNDARY;
}
if (false == rtl92c_init_llt_table(hw, boundary)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to init LLT Table!\n");
+ pr_err("Failed to init LLT Table!\n");
return -EINVAL;
}
_rtl92cu_init_queue_reserved_page(hw, wmm_enable, out_ep_nums,
@@ -986,7 +979,7 @@ int rtl92cu_hw_init(struct ieee80211_hw *hw)
rtlhal->hw_type = HARDWARE_TYPE_RTL8192CU;
err = _rtl92cu_init_mac(hw);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "init mac failed!\n");
+ pr_err("init mac failed!\n");
goto exit;
}
err = rtl92c_download_fw(hw);
@@ -1099,8 +1092,7 @@ static void _ResetDigitalProcedure1(struct ieee80211_hw *hw, bool bWithoutHWSM)
udelay(50);
}
if (retry_cnts >= 100) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "#####=> 8051 reset failed!.........................\n");
+ pr_err("8051 reset failed!.........................\n");
/* if 8051 reset fail, reset MAC. */
rtl_write_byte(rtlpriv,
REG_SYS_FUNC_EN + 1,
@@ -1340,8 +1332,7 @@ static int _rtl92cu_set_media_status(struct ieee80211_hw *hw,
"Set Network type to AP!\n");
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Network type %d not supported!\n", type);
+ pr_err("Network type %d not supported!\n", type);
goto error_out;
}
rtl_write_byte(rtlpriv, MSR, bt_msr);
@@ -1555,8 +1546,7 @@ void rtl92cu_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
case HAL_DEF_WOWLAN:
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", variable);
+ pr_err("switch case %#x not processed\n", variable);
break;
}
}
@@ -1926,8 +1916,7 @@ void rtl92cu_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
break;
}
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", variable);
+ pr_err("switch case %#x not processed\n", variable);
break;
}
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/led.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/led.c
index c624081..9d83f08 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/led.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/led.c
@@ -57,8 +57,7 @@ void rtl92cu_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled)
rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg & 0x0f) | BIT(5));
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", pled->ledpin);
+ pr_err("switch case %#x not processed\n", pled->ledpin);
break;
}
pled->ledon = true;
@@ -90,8 +89,7 @@ void rtl92cu_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled)
rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg | BIT(3)));
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", pled->ledpin);
+ pr_err("switch case %#x not processed\n", pled->ledpin);
break;
}
pled->ledon = false;
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c
index cf212f6..1b124ea 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c
@@ -157,9 +157,8 @@ bool rtl92c_llt_write(struct ieee80211_hw *hw, u32 address, u32 data)
if (_LLT_NO_ACTIVE == _LLT_OP_VALUE(value))
break;
if (count > POLLING_LLT_THRESHOLD) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to polling write LLT done at address %d! _LLT_OP_VALUE(%x)\n",
- address, _LLT_OP_VALUE(value));
+ pr_err("Failed to polling write LLT done at address %d! _LLT_OP_VALUE(%x)\n",
+ address, _LLT_OP_VALUE(value));
status = false;
break;
}
@@ -262,8 +261,7 @@ void rtl92c_set_key(struct ieee80211_hw *hw, u32 key_index,
enc_algo = CAM_AES;
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "illegal switch case\n");
+ pr_err("illegal switch case\n");
enc_algo = CAM_TKIP;
break;
}
@@ -280,9 +278,7 @@ void rtl92c_set_key(struct ieee80211_hw *hw, u32 key_index,
entry_id = rtl_cam_get_free_entry(hw,
p_macaddr);
if (entry_id >= TOTAL_CAM_ENTRY) {
- RT_TRACE(rtlpriv, COMP_SEC,
- DBG_EMERG,
- "Can not find free hw security cam entry\n");
+ pr_err("Can not find free hw security cam entry\n");
return;
}
} else {
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/phy.c
index f35f435..452437f 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/phy.c
@@ -274,8 +274,7 @@ bool rtl92cu_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
break;
case RF90_PATH_C:
case RF90_PATH_D:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", rfpath);
+ pr_err("switch case %#x not processed\n", rfpath);
break;
default:
break;
@@ -314,8 +313,7 @@ void rtl92cu_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_prsr_rsc);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
break;
}
switch (rtlphy->current_chan_bw) {
@@ -336,8 +334,7 @@ void rtl92cu_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
HAL_PRIME_CHNL_OFFSET_LOWER) ? 2 : 1);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
break;
}
rtl92cu_phy_rf6052_set_bandwidth(hw, rtlphy->current_chan_bw);
@@ -509,8 +506,7 @@ static bool _rtl92cu_phy_set_rf_power_state(struct ieee80211_hw *hw,
_rtl92c_phy_set_rf_sleep(hw);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", rfpwr_state);
+ pr_err("switch case %#x not processed\n", rfpwr_state);
bresult = false;
break;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/rf.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/rf.c
index 5e31830..9cff6bc 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/rf.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/rf.c
@@ -51,8 +51,7 @@ void rtl92cu_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
rtlphy->rfreg_chnlval[0]);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", bandwidth);
+ pr_err("unknown bandwidth: %#X\n", bandwidth);
break;
}
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/sw.c
index b84e13a..935e830 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/sw.c
@@ -68,8 +68,7 @@ static int rtl92cu_init_sw_vars(struct ieee80211_hw *hw)
/* for firmware buf */
rtlpriv->rtlhal.pfirmware = vzalloc(0x4000);
if (!rtlpriv->rtlhal.pfirmware) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Can't alloc buffer for fw\n");
+ pr_err("Can't alloc buffer for fw\n");
return 1;
}
if (IS_VENDOR_UMC_A_CUT(rtlpriv->rtlhal.version) &&
@@ -158,7 +157,7 @@ static struct rtl_hal_ops rtl8192cu_hal_ops = {
static struct rtl_mod_params rtl92cu_mod_params = {
.sw_crypto = 0,
- .debug = DBG_EMERG,
+ .debug = 0,
};
module_param_named(swenc, rtl92cu_mod_params.sw_crypto, bool, 0444);
--
2.10.2
^ permalink raw reply related
* [PATCH 09/14] rtlwifi_new: rtl8192de: Remove all instances of DBG_EMERG
From: Larry Finger @ 2016-12-11 5:45 UTC (permalink / raw)
To: kvalo; +Cc: devel, linux-wireless, Larry Finger, Ping-Ke Shih
In-Reply-To: <20161211054523.7119-1-Larry.Finger@lwfinger.net>
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
---
.../net/wireless/realtek/rtlwifi/rtl8192de/fw.c | 19 ++++--------
.../net/wireless/realtek/rtlwifi/rtl8192de/hw.c | 34 ++++++++--------------
.../net/wireless/realtek/rtlwifi/rtl8192de/led.c | 6 ++--
.../net/wireless/realtek/rtlwifi/rtl8192de/phy.c | 31 ++++++++------------
.../net/wireless/realtek/rtlwifi/rtl8192de/rf.c | 3 +-
.../net/wireless/realtek/rtlwifi/rtl8192de/sw.c | 8 ++---
6 files changed, 36 insertions(+), 65 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c
index 452de25..5b33bed 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c
@@ -126,8 +126,7 @@ static void _rtl92d_write_fw(struct ieee80211_hw *hw,
pagenums = size / FW_8192D_PAGE_SIZE;
remainSize = size % FW_8192D_PAGE_SIZE;
if (pagenums > 8) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Page numbers should not greater then 8\n");
+ pr_err("Page numbers should not greater then 8\n");
}
for (page = 0; page < pagenums; page++) {
offset = page * FW_8192D_PAGE_SIZE;
@@ -153,9 +152,7 @@ static int _rtl92d_fw_free_to_go(struct ieee80211_hw *hw)
} while ((counter++ < FW_8192D_POLLING_TIMEOUT_COUNT) &&
(!(value32 & FWDL_ChkSum_rpt)));
if (counter >= FW_8192D_POLLING_TIMEOUT_COUNT) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "chksum report faill ! REG_MCUFWDL:0x%08x\n",
- value32);
+ pr_err("chksum report fail! REG_MCUFWDL:0x%08x\n", value32);
return -EIO;
}
RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
@@ -327,8 +324,7 @@ int rtl92d_download_fw(struct ieee80211_hw *hw)
rtl_write_byte(rtlpriv, 0x1f, value);
spin_unlock_irqrestore(&globalmutex_for_fwdownload, flags);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "fw is not ready to run!\n");
+ pr_err("fw is not ready to run!\n");
goto exit;
} else {
RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE, "fw is ready to run!\n");
@@ -407,8 +403,7 @@ static void _rtl92d_fill_h2c_command(struct ieee80211_hw *hw,
while (!bwrite_success) {
wait_writeh2c_limmit--;
if (wait_writeh2c_limmit == 0) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Write H2C fail because no trigger for FW INT!\n");
+ pr_err("Write H2C fail because no trigger for FW INT!\n");
break;
}
boxnum = rtlhal->last_hmeboxnum;
@@ -430,8 +425,7 @@ static void _rtl92d_fill_h2c_command(struct ieee80211_hw *hw,
box_extreg = REG_HMEBOX_EXT_3;
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", boxnum);
+ pr_err("switch case %#x not processed\n", boxnum);
break;
}
isfw_read = _rtl92d_check_fw_read_last_h2c(hw, boxnum);
@@ -507,8 +501,7 @@ static void _rtl92d_fill_h2c_command(struct ieee80211_hw *hw,
boxcontent[idx]);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", cmd_len);
+ pr_err("switch case %#x not processed\n", cmd_len);
break;
}
bwrite_success = true;
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c
index fcb14c5..2c92c33 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c
@@ -163,8 +163,7 @@ void rtl92de_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
case HAL_DEF_WOWLAN:
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", variable);
+ pr_err("switch case %#x not processed\n", variable);
break;
}
}
@@ -358,9 +357,8 @@ void rtl92de_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
acm_ctrl &= (~ACMHW_VOQEN);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n",
- e_aci);
+ pr_err("switch case %#x not processed\n",
+ e_aci);
break;
}
}
@@ -500,8 +498,7 @@ void rtl92de_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
break;
}
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", variable);
+ pr_err("switch case %#x not processed\n", variable);
break;
}
}
@@ -520,9 +517,8 @@ static bool _rtl92de_llt_write(struct ieee80211_hw *hw, u32 address, u32 data)
if (_LLT_NO_ACTIVE == _LLT_OP_VALUE(value))
break;
if (count > POLLING_LLT_THRESHOLD) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to polling write LLT done at address %d!\n",
- address);
+ pr_err("Failed to polling write LLT done at address %d!\n",
+ address);
status = false;
break;
}
@@ -920,7 +916,7 @@ int rtl92de_hw_init(struct ieee80211_hw *hw)
/* rtlpriv->intf_ops->disable_aspm(hw); */
rtstatus = _rtl92de_init_mac(hw);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Init MAC failed\n");
+ pr_err("Init MAC failed\n");
err = 1;
spin_unlock_irqrestore(&globalmutex_for_power_and_efuse, flags);
return err;
@@ -1119,11 +1115,8 @@ static int _rtl92de_set_media_status(struct ieee80211_hw *hw,
"Set Network type to AP!\n");
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Network type %d not supported!\n", type);
+ pr_err("Network type %d not supported!\n", type);
return 1;
- break;
-
}
rtl_write_byte(rtlpriv, MSR, bt_msr);
rtlpriv->cfg->ops->led_control(hw, ledaction);
@@ -1732,7 +1725,7 @@ static void _rtl92de_efuse_update_chip_version(struct ieee80211_hw *hw)
break;
default:
chipver |= CHIP_92D_D_CUT;
- RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "Unknown CUT!\n");
+ pr_err("Unknown CUT!\n");
break;
}
rtlpriv->rtlhal.version = chipver;
@@ -1816,7 +1809,7 @@ void rtl92de_read_eeprom_info(struct ieee80211_hw *hw)
rtlefuse->autoload_failflag = false;
_rtl92de_read_adapter_info(hw);
} else {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Autoload ERR!!\n");
+ pr_err("Autoload ERR!!\n");
}
return;
}
@@ -2169,8 +2162,7 @@ void rtl92de_set_key(struct ieee80211_hw *hw, u32 key_index,
enc_algo = CAM_AES;
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", enc_algo);
+ pr_err("switch case %#x not processed\n", enc_algo);
enc_algo = CAM_TKIP;
break;
}
@@ -2186,9 +2178,7 @@ void rtl92de_set_key(struct ieee80211_hw *hw, u32 key_index,
entry_id = rtl_cam_get_free_entry(hw,
p_macaddr);
if (entry_id >= TOTAL_CAM_ENTRY) {
- RT_TRACE(rtlpriv, COMP_SEC,
- DBG_EMERG,
- "Can not find free hw security cam entry\n");
+ pr_err("Can not find free hw security cam entry\n");
return;
}
} else {
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/led.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/led.c
index c22b8a2..58ec4fc 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/led.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/led.c
@@ -66,8 +66,7 @@ void rtl92de_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled)
rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg & 0x0f) | BIT(5));
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", pled->ledpin);
+ pr_err("switch case %#x not processed\n", pled->ledpin);
break;
}
pled->ledon = true;
@@ -101,8 +100,7 @@ void rtl92de_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled)
rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg | BIT(3)));
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", pled->ledpin);
+ pr_err("switch case %#x not processed\n", pled->ledpin);
break;
}
pled->ledon = false;
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c
index b0dc189..155b295 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c
@@ -716,7 +716,7 @@ static bool _rtl92d_phy_bb_config(struct ieee80211_hw *hw)
rtstatus = _rtl92d_phy_config_bb_with_headerfile(hw,
BASEBAND_CONFIG_PHY_REG);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Write BB Reg Fail!!\n");
+ pr_err("Write BB Reg Fail!!\n");
return false;
}
@@ -731,13 +731,13 @@ static bool _rtl92d_phy_bb_config(struct ieee80211_hw *hw)
BASEBAND_CONFIG_PHY_REG);
}
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "BB_PG Reg Fail!!\n");
+ pr_err("BB_PG Reg Fail!!\n");
return false;
}
rtstatus = _rtl92d_phy_config_bb_with_headerfile(hw,
BASEBAND_CONFIG_AGC_TAB);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "AGC Table Fail\n");
+ pr_err("AGC Table Fail\n");
return false;
}
rtlphy->cck_high_power = (bool) (rtl_get_bbreg(hw,
@@ -833,8 +833,7 @@ bool rtl92d_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
break;
case RF90_PATH_C:
case RF90_PATH_D:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", rfpath);
+ pr_err("switch case %#x not processed\n", rfpath);
break;
}
return true;
@@ -987,8 +986,7 @@ void rtl92d_phy_set_bw_mode(struct ieee80211_hw *hw,
rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_prsr_rsc);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
break;
}
switch (rtlphy->current_chan_bw) {
@@ -1019,8 +1017,7 @@ void rtl92d_phy_set_bw_mode(struct ieee80211_hw *hw,
HAL_PRIME_CHNL_OFFSET_LOWER) ? 2 : 1);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
break;
}
@@ -2842,9 +2839,8 @@ static bool _rtl92d_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw,
rtl92d_phy_reload_iqk_setting(hw, channel);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n",
- currentcmd->cmdid);
+ pr_err("switch case %#x not processed\n",
+ currentcmd->cmdid);
break;
}
break;
@@ -2956,9 +2952,8 @@ static void rtl92d_phy_set_io(struct ieee80211_hw *hw)
rtl92d_dm_write_dig(hw);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n",
- rtlphy->current_io_type);
+ pr_err("switch case %#x not processed\n",
+ rtlphy->current_io_type);
break;
}
rtlphy->set_io_inprogress = false;
@@ -2988,8 +2983,7 @@ bool rtl92d_phy_set_io_cmd(struct ieee80211_hw *hw, enum io_type iotype)
postprocessing = true;
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", iotype);
+ pr_err("switch case %#x not processed\n", iotype);
break;
}
} while (false);
@@ -3176,8 +3170,7 @@ bool rtl92d_phy_set_rf_power_state(struct ieee80211_hw *hw,
_rtl92d_phy_set_rfsleep(hw);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", rfpwr_state);
+ pr_err("switch case %#x not processed\n", rfpwr_state);
bresult = false;
break;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/rf.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/rf.c
index 9dc9e91..021d3c5 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/rf.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/rf.c
@@ -63,8 +63,7 @@ void rtl92d_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
}
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", bandwidth);
+ pr_err("unknown bandwidth: %#X\n", bandwidth);
break;
}
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/sw.c
index 0d98b34..51463d7 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/sw.c
@@ -171,8 +171,7 @@ static int rtl92d_init_sw_vars(struct ieee80211_hw *hw)
/* for firmware buf */
rtlpriv->rtlhal.pfirmware = vzalloc(0x8000);
if (!rtlpriv->rtlhal.pfirmware) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Can't alloc buffer for fw\n");
+ pr_err("Can't alloc buffer for fw\n");
return 1;
}
@@ -185,8 +184,7 @@ static int rtl92d_init_sw_vars(struct ieee80211_hw *hw)
rtlpriv->io.dev, GFP_KERNEL, hw,
rtl_fw_cb);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to request firmware!\n");
+ pr_err("Failed to request firmware!\n");
return 1;
}
@@ -256,7 +254,7 @@ static struct rtl_mod_params rtl92de_mod_params = {
.inactiveps = true,
.swctrl_lps = true,
.fwctrl_lps = false,
- .debug = DBG_EMERG,
+ .debug = 0,
};
static const struct rtl_hal_cfg rtl92de_hal_cfg = {
--
2.10.2
^ permalink raw reply related
* [PATCH 08/14] rtlwifi: rtl8192se: Remove all instances of DBG_EMERG
From: Larry Finger @ 2016-12-11 5:45 UTC (permalink / raw)
To: kvalo; +Cc: devel, linux-wireless, Larry Finger, Ping-Ke Shih
In-Reply-To: <20161211054523.7119-1-Larry.Finger@lwfinger.net>
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
---
.../net/wireless/realtek/rtlwifi/rtl8192se/fw.c | 46 ++++++++--------------
.../net/wireless/realtek/rtlwifi/rtl8192se/hw.c | 40 +++++++------------
.../net/wireless/realtek/rtlwifi/rtl8192se/led.c | 6 +--
.../net/wireless/realtek/rtlwifi/rtl8192se/phy.c | 36 ++++++-----------
.../net/wireless/realtek/rtlwifi/rtl8192se/rf.c | 3 +-
.../net/wireless/realtek/rtlwifi/rtl8192se/sw.c | 8 ++--
6 files changed, 51 insertions(+), 88 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c
index 32f9207..1922e78 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c
@@ -113,8 +113,7 @@ static u8 _rtl92s_firmware_header_map_rftype(struct ieee80211_hw *hw)
case RF_2T2R:
return 0x22;
default:
- RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "Unknown RF type(%x)\n",
- rtlphy->rf_type);
+ pr_err("rtl8192se: Unknown RF type(%x)\n", rtlphy->rf_type);
break;
}
return 0x22;
@@ -168,9 +167,7 @@ static bool _rtl92s_firmware_downloadcode(struct ieee80211_hw *hw,
_rtl92s_fw_set_rqpn(hw);
if (buffer_len >= MAX_FIRMWARE_CODE_SIZE) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Size over FIRMWARE_CODE_SIZE!\n");
-
+ pr_err("rtl8192se: Size over FIRMWARE_CODE_SIZE!\n");
return false;
}
@@ -239,9 +236,8 @@ static bool _rtl92s_firmware_checkready(struct ieee80211_hw *hw,
} while (pollingcnt--);
if (!(cpustatus & IMEM_CHK_RPT) || (pollingcnt <= 0)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "FW_STATUS_LOAD_IMEM FAIL CPU, Status=%x\n",
- cpustatus);
+ pr_err("rtl8192se: FW_STATUS_LOAD_IMEM FAIL CPU, Status=%x\n",
+ cpustatus);
goto status_check_fail;
}
break;
@@ -257,17 +253,15 @@ static bool _rtl92s_firmware_checkready(struct ieee80211_hw *hw,
} while (pollingcnt--);
if (!(cpustatus & EMEM_CHK_RPT) || (pollingcnt <= 0)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "FW_STATUS_LOAD_EMEM FAIL CPU, Status=%x\n",
- cpustatus);
+ pr_err("rtl8192se: FW_STATUS_LOAD_EMEM FAIL CPU, Status=%x\n",
+ cpustatus);
goto status_check_fail;
}
/* Turn On CPU */
rtstatus = _rtl92s_firmware_enable_cpu(hw);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Enable CPU fail!\n");
+ pr_err("rtl8192se: Enable CPU fail!\n");
goto status_check_fail;
}
break;
@@ -282,9 +276,8 @@ static bool _rtl92s_firmware_checkready(struct ieee80211_hw *hw,
} while (pollingcnt--);
if (!(cpustatus & DMEM_CODE_DONE) || (pollingcnt <= 0)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Polling DMEM code done fail ! cpustatus(%#x)\n",
- cpustatus);
+ pr_err("rtl8192se: Polling DMEM code done fail ! cpustatus(%#x)\n",
+ cpustatus);
goto status_check_fail;
}
@@ -308,9 +301,8 @@ static bool _rtl92s_firmware_checkready(struct ieee80211_hw *hw,
if (((cpustatus & LOAD_FW_READY) != LOAD_FW_READY) ||
(pollingcnt <= 0)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Polling Load Firmware ready fail ! cpustatus(%x)\n",
- cpustatus);
+ pr_err("rtl8192se: Polling Load Firmware ready fail ! cpustatus(%x)\n",
+ cpustatus);
goto status_check_fail;
}
@@ -331,8 +323,7 @@ static bool _rtl92s_firmware_checkready(struct ieee80211_hw *hw,
break;
default:
- RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
- "Unknown status check!\n");
+ pr_err("rtl8192se: Unknown status check!\n");
rtstatus = false;
break;
}
@@ -380,8 +371,7 @@ int rtl92s_download_fw(struct ieee80211_hw *hw)
/* 2. Retrieve IMEM image. */
if ((pfwheader->img_imem_size == 0) || (pfwheader->img_imem_size >
sizeof(firmware->fw_imem))) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "memory for data image is less than IMEM required\n");
+ pr_err("rtl8192se: memory for data image is less than IMEM required\n");
goto fail;
} else {
puc_mappedfile += fwhdr_size;
@@ -393,8 +383,7 @@ int rtl92s_download_fw(struct ieee80211_hw *hw)
/* 3. Retriecve EMEM image. */
if (pfwheader->img_sram_size > sizeof(firmware->fw_emem)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "memory for data image is less than EMEM required\n");
+ pr_err("rtl8192se: memory for data image is less than EMEM required\n");
goto fail;
} else {
puc_mappedfile += firmware->fw_imem_len;
@@ -428,8 +417,7 @@ int rtl92s_download_fw(struct ieee80211_hw *hw)
RT_8192S_FIRMWARE_HDR_EXCLUDE_PRI_SIZE;
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Unexpected Download step!!\n");
+ pr_err("rtl8192se: Unexpected Download step!!\n");
goto fail;
}
@@ -438,14 +426,14 @@ int rtl92s_download_fw(struct ieee80211_hw *hw)
ul_filelength);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "fail!\n");
+ pr_err("rtl8192se: fail!\n");
goto fail;
}
/* <3> Check whether load FW process is ready */
rtstatus = _rtl92s_firmware_checkready(hw, fwstatus);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "fail!\n");
+ pr_err("rtl8192se: rtl8192se: firmware fail!\n");
goto fail;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c
index d320118..c2ff879 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c
@@ -75,11 +75,9 @@ void rtl92se_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
}
case HAL_DEF_WOWLAN:
break;
- default: {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", variable);
- break;
- }
+ default:
+ pr_err("rtl8192se: switch case %#x not processed\n", variable);
+ break;
}
}
@@ -294,9 +292,8 @@ void rtl92se_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
acm_ctrl &= (~AcmHw_VoqEn);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n",
- e_aci);
+ pr_err("rtl8192se: switch case %#x not processed\n",
+ e_aci);
break;
}
}
@@ -431,8 +428,7 @@ void rtl92se_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
}
break; }
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", variable);
+ pr_err("rtl8192se: switch case %#x not processed\n", variable);
break;
}
@@ -745,9 +741,8 @@ static void _rtl92se_macconfig_before_fwdownload(struct ieee80211_hw *hw)
} while (pollingcnt--);
if (pollingcnt <= 0) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Polling TXDMA_INIT_VALUE timeout!! Current TCR(%#x)\n",
- tmpu1b);
+ pr_err("rtl8192se: Polling TXDMA_INIT_VALUE timeout!! Current TCR(%#x)\n",
+ tmpu1b);
tmpu1b = rtl_read_byte(rtlpriv, CMDR);
rtl_write_byte(rtlpriv, CMDR, tmpu1b & (~TXDMA_EN));
udelay(2);
@@ -1004,7 +999,7 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
/* 3. Initialize MAC/PHY Config by MACPHY_reg.txt */
if (!rtl92s_phy_mac_config(hw)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "MAC Config failed\n");
+ pr_err("rtl8192se: MAC Config failed\n");
err = rtstatus;
goto exit;
}
@@ -1024,7 +1019,7 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
/* 4. Initialize BB After MAC Config PHY_reg.txt, AGC_Tab.txt */
if (!rtl92s_phy_bb_config(hw)) {
- RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "BB Config failed\n");
+ pr_err("rtl8192se: BB Config failed\n");
err = rtstatus;
goto exit;
}
@@ -1194,8 +1189,7 @@ static int _rtl92se_set_media_status(struct ieee80211_hw *hw,
"Set Network type to AP!\n");
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Network type %d not supported!\n", type);
+ pr_err("rtl8192se: Network type %d not supported!\n", type);
return 1;
}
@@ -1685,8 +1679,7 @@ static void _rtl92se_read_adapter_info(struct ieee80211_hw *hw)
break;
case EEPROM_93C46:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "RTL819X Not boot from eeprom, check it !!\n");
+ pr_err("rtl8192se: RTL819X Not boot from eeprom, check it !!\n");
return;
default:
@@ -2030,7 +2023,7 @@ void rtl92se_read_eeprom_info(struct ieee80211_hw *hw)
rtlefuse->autoload_failflag = false;
_rtl92se_read_adapter_info(hw);
} else {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Autoload ERR!!\n");
+ pr_err("rtl8192se: Autoload ERR!!\n");
rtlefuse->autoload_failflag = true;
}
}
@@ -2463,8 +2456,8 @@ void rtl92se_set_key(struct ieee80211_hw *hw, u32 key_index, u8 *p_macaddr,
enc_algo = CAM_AES;
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", enc_algo);
+ pr_err("rtl8192se: switch case %#x not processed\n",
+ enc_algo);
enc_algo = CAM_TKIP;
break;
}
@@ -2481,9 +2473,7 @@ void rtl92se_set_key(struct ieee80211_hw *hw, u32 key_index, u8 *p_macaddr,
entry_id = rtl_cam_get_free_entry(hw,
p_macaddr);
if (entry_id >= TOTAL_CAM_ENTRY) {
- RT_TRACE(rtlpriv,
- COMP_SEC, DBG_EMERG,
- "Can not find free hw security cam entry\n");
+ pr_err("rtl8192se: Can not find free hw security cam entry\n");
return;
}
} else {
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/led.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/led.c
index 8700078..b6b890f 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/led.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/led.c
@@ -63,8 +63,8 @@ void rtl92se_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled)
rtl_write_byte(rtlpriv, LEDCFG, ledcfg & 0x0f);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", pled->ledpin);
+ pr_err("rtl8192se: switch case %#x not processed\n",
+ pled->ledpin);
break;
}
pled->ledon = true;
@@ -99,8 +98,8 @@ void rtl92se_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled)
rtl_write_byte(rtlpriv, LEDCFG, (ledcfg | BIT(3)));
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", pled->ledpin);
+ pr_err("rtl8192se: switch case %#x not processed\n",
+ pled->ledpin);
break;
}
pled->ledon = false;
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c
index 71b2f46e..f835d99 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c
@@ -235,7 +235,6 @@ void rtl92s_phy_set_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath,
void rtl92s_phy_scan_operation_backup(struct ieee80211_hw *hw,
u8 operation)
{
- struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
if (!is_hal_stop(rtlhal)) {
@@ -247,8 +246,7 @@ void rtl92s_phy_scan_operation_backup(struct ieee80211_hw *hw,
rtl92s_phy_set_fw_cmd(hw, FW_CMD_RESUME_DM_BY_SCAN);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Unknown operation\n");
+ pr_err("rtl8192se: Unknown operation\n");
break;
}
}
@@ -288,8 +286,8 @@ void rtl92s_phy_set_bw_mode(struct ieee80211_hw *hw,
rtl_write_byte(rtlpriv, BW_OPMODE, reg_bw_opmode);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("rtl8192se: unknown bandwidth: %#X\n",
+ rtlphy->current_chan_bw);
break;
}
@@ -313,8 +310,8 @@ void rtl92s_phy_set_bw_mode(struct ieee80211_hw *hw,
rtl_write_byte(rtlpriv, RFPGA0_ANALOGPARAMETER2, 0x18);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("rtl8192se: unknown bandwidth: %#X\n",
+ rtlphy->current_chan_bw);
break;
}
@@ -437,9 +433,8 @@ static bool _rtl92s_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw,
}
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n",
- currentcmd->cmdid);
+ pr_err("rtl8192se: switch case %#x not processed\n",
+ currentcmd->cmdid);
break;
}
@@ -644,8 +639,8 @@ bool rtl92s_phy_set_rf_power_state(struct ieee80211_hw *hw,
_rtl92se_phy_set_rf_sleep(hw);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", rfpwr_state);
+ pr_err("rtl8192se: switch case %#x not processed\n",
+ rfpwr_state);
bresult = false;
break;
}
@@ -937,8 +931,7 @@ static bool _rtl92s_phy_bb_config_parafile(struct ieee80211_hw *hw)
}
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
- "Write BB Reg Fail!!\n");
+ pr_err("rtl8192se: Write BB Reg Fail!!\n");
goto phy_BB8190_Config_ParaFile_Fail;
}
@@ -951,8 +944,7 @@ static bool _rtl92s_phy_bb_config_parafile(struct ieee80211_hw *hw)
BASEBAND_CONFIG_PHY_REG);
}
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
- "_rtl92s_phy_bb_config_parafile(): BB_PG Reg Fail!!\n");
+ pr_err("rtl8192se: _rtl92s_phy_bb_config_parafile(): BB_PG Reg Fail!!\n");
goto phy_BB8190_Config_ParaFile_Fail;
}
@@ -1077,12 +1069,10 @@ bool rtl92s_phy_bb_config(struct ieee80211_hw *hw)
(rtlphy->rf_type == RF_1T2R && rf_num != 2) ||
(rtlphy->rf_type == RF_2T2R && rf_num != 2) ||
(rtlphy->rf_type == RF_2T2R_GREEN && rf_num != 2)) {
- RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
- "RF_Type(%x) does not match RF_Num(%x)!!\n",
- rtlphy->rf_type, rf_num);
- RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
- "path1 0x%x, path2 0x%x, pathmap 0x%x\n",
- path1, path2, pathmap);
+ pr_err("rtl8192se: RF_Type(%x) does not match RF_Num(%x)!!\n",
+ rtlphy->rf_type, rf_num);
+ pr_err("rtl8192se: path1 0x%x, path2 0x%x, pathmap 0x%x\n",
+ path1, path2, pathmap);
}
return rtstatus;
@@ -1221,7 +1211,7 @@ void rtl92s_phy_chk_fwcmd_iodone(struct ieee80211_hw *hw)
} while (--pollingcnt);
if (pollingcnt == 0)
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Set FW Cmd fail!!\n");
+ pr_err("rtl8192se: Set FW Cmd fail!!\n");
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/rf.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/rf.c
index bd2fa77..ea5b8ec 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/rf.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/rf.c
@@ -523,8 +523,7 @@ void rtl92s_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
rtlphy->rfreg_chnlval[0]);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", bandwidth);
+ pr_err("rtl8192se: unknown bandwidth: %#X\n", bandwidth);
break;
}
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/sw.c
index 998cefb..3c66d00 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/sw.c
@@ -96,8 +96,7 @@ static void rtl92se_fw_cb(const struct firmware *firmware, void *context)
return;
}
if (firmware->size > rtlpriv->max_fw_size) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Firmware is too big!\n");
+ pr_err("rtl8192se: Firmware is too big!\n");
rtlpriv->max_fw_size = 0;
release_firmware(firmware);
return;
@@ -218,8 +217,7 @@ static int rtl92s_init_sw_vars(struct ieee80211_hw *hw)
rtlpriv->io.dev, GFP_KERNEL, hw,
rtl92se_fw_cb);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to request firmware!\n");
+ pr_err("rtl8192se: Failed to request firmware!\n");
return 1;
}
@@ -299,7 +297,7 @@ static struct rtl_mod_params rtl92se_mod_params = {
.inactiveps = true,
.swctrl_lps = true,
.fwctrl_lps = false,
- .debug = DBG_EMERG,
+ .debug = 0,
};
/* Because memory R/W bursting will cause system hang/crash
--
2.10.2
^ permalink raw reply related
* [PATCH 08/14] rtlwifi_new: rtl8192se: Remove all instances of DBG_EMERG
From: Larry Finger @ 2016-12-11 5:45 UTC (permalink / raw)
To: kvalo; +Cc: devel, linux-wireless, Larry Finger, Ping-Ke Shih
In-Reply-To: <20161211054523.7119-1-Larry.Finger@lwfinger.net>
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
---
.../net/wireless/realtek/rtlwifi/rtl8192se/fw.c | 46 ++++++++--------------
.../net/wireless/realtek/rtlwifi/rtl8192se/hw.c | 40 +++++++------------
.../net/wireless/realtek/rtlwifi/rtl8192se/led.c | 6 +--
.../net/wireless/realtek/rtlwifi/rtl8192se/phy.c | 36 ++++++-----------
.../net/wireless/realtek/rtlwifi/rtl8192se/rf.c | 3 +-
.../net/wireless/realtek/rtlwifi/rtl8192se/sw.c | 8 ++--
6 files changed, 51 insertions(+), 88 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c
index 32f9207..1922e78 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c
@@ -113,8 +113,7 @@ static u8 _rtl92s_firmware_header_map_rftype(struct ieee80211_hw *hw)
case RF_2T2R:
return 0x22;
default:
- RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "Unknown RF type(%x)\n",
- rtlphy->rf_type);
+ pr_err("Unknown RF type(%x)\n", rtlphy->rf_type);
break;
}
return 0x22;
@@ -168,9 +167,7 @@ static bool _rtl92s_firmware_downloadcode(struct ieee80211_hw *hw,
_rtl92s_fw_set_rqpn(hw);
if (buffer_len >= MAX_FIRMWARE_CODE_SIZE) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Size over FIRMWARE_CODE_SIZE!\n");
-
+ pr_err("Size over FIRMWARE_CODE_SIZE!\n");
return false;
}
@@ -239,9 +236,8 @@ static bool _rtl92s_firmware_checkready(struct ieee80211_hw *hw,
} while (pollingcnt--);
if (!(cpustatus & IMEM_CHK_RPT) || (pollingcnt <= 0)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "FW_STATUS_LOAD_IMEM FAIL CPU, Status=%x\n",
- cpustatus);
+ pr_err("FW_STATUS_LOAD_IMEM FAIL CPU, Status=%x\n",
+ cpustatus);
goto status_check_fail;
}
break;
@@ -257,17 +253,15 @@ static bool _rtl92s_firmware_checkready(struct ieee80211_hw *hw,
} while (pollingcnt--);
if (!(cpustatus & EMEM_CHK_RPT) || (pollingcnt <= 0)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "FW_STATUS_LOAD_EMEM FAIL CPU, Status=%x\n",
- cpustatus);
+ pr_err("FW_STATUS_LOAD_EMEM FAIL CPU, Status=%x\n",
+ cpustatus);
goto status_check_fail;
}
/* Turn On CPU */
rtstatus = _rtl92s_firmware_enable_cpu(hw);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Enable CPU fail!\n");
+ pr_err("Enable CPU fail!\n");
goto status_check_fail;
}
break;
@@ -282,9 +276,8 @@ static bool _rtl92s_firmware_checkready(struct ieee80211_hw *hw,
} while (pollingcnt--);
if (!(cpustatus & DMEM_CODE_DONE) || (pollingcnt <= 0)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Polling DMEM code done fail ! cpustatus(%#x)\n",
- cpustatus);
+ pr_err("Polling DMEM code done fail ! cpustatus(%#x)\n",
+ cpustatus);
goto status_check_fail;
}
@@ -308,9 +301,8 @@ static bool _rtl92s_firmware_checkready(struct ieee80211_hw *hw,
if (((cpustatus & LOAD_FW_READY) != LOAD_FW_READY) ||
(pollingcnt <= 0)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Polling Load Firmware ready fail ! cpustatus(%x)\n",
- cpustatus);
+ pr_err("Polling Load Firmware ready fail ! cpustatus(%x)\n",
+ cpustatus);
goto status_check_fail;
}
@@ -331,8 +323,7 @@ static bool _rtl92s_firmware_checkready(struct ieee80211_hw *hw,
break;
default:
- RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
- "Unknown status check!\n");
+ pr_err("Unknown status check!\n");
rtstatus = false;
break;
}
@@ -380,8 +371,7 @@ int rtl92s_download_fw(struct ieee80211_hw *hw)
/* 2. Retrieve IMEM image. */
if ((pfwheader->img_imem_size == 0) || (pfwheader->img_imem_size >
sizeof(firmware->fw_imem))) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "memory for data image is less than IMEM required\n");
+ pr_err("memory for data image is less than IMEM required\n");
goto fail;
} else {
puc_mappedfile += fwhdr_size;
@@ -393,8 +383,7 @@ int rtl92s_download_fw(struct ieee80211_hw *hw)
/* 3. Retriecve EMEM image. */
if (pfwheader->img_sram_size > sizeof(firmware->fw_emem)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "memory for data image is less than EMEM required\n");
+ pr_err("memory for data image is less than EMEM required\n");
goto fail;
} else {
puc_mappedfile += firmware->fw_imem_len;
@@ -428,8 +417,7 @@ int rtl92s_download_fw(struct ieee80211_hw *hw)
RT_8192S_FIRMWARE_HDR_EXCLUDE_PRI_SIZE;
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Unexpected Download step!!\n");
+ pr_err("Unexpected Download step!!\n");
goto fail;
}
@@ -438,14 +426,14 @@ int rtl92s_download_fw(struct ieee80211_hw *hw)
ul_filelength);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "fail!\n");
+ pr_err("fail!\n");
goto fail;
}
/* <3> Check whether load FW process is ready */
rtstatus = _rtl92s_firmware_checkready(hw, fwstatus);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "fail!\n");
+ pr_err("rtl8192se: firmware fail!\n");
goto fail;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c
index f4ab721..a6f3783 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c
@@ -75,11 +75,9 @@ void rtl92se_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
}
case HAL_DEF_WOWLAN:
break;
- default: {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", variable);
- break;
- }
+ default:
+ pr_err("switch case %#x not processed\n", variable);
+ break;
}
}
@@ -294,9 +292,8 @@ void rtl92se_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
acm_ctrl &= (~AcmHw_VoqEn);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n",
- e_aci);
+ pr_err("switch case %#x not processed\n",
+ e_aci);
break;
}
}
@@ -431,8 +428,7 @@ void rtl92se_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
}
break; }
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", variable);
+ pr_err("switch case %#x not processed\n", variable);
break;
}
@@ -745,9 +741,8 @@ static void _rtl92se_macconfig_before_fwdownload(struct ieee80211_hw *hw)
} while (pollingcnt--);
if (pollingcnt <= 0) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Polling TXDMA_INIT_VALUE timeout!! Current TCR(%#x)\n",
- tmpu1b);
+ pr_err("Polling TXDMA_INIT_VALUE timeout!! Current TCR(%#x)\n",
+ tmpu1b);
tmpu1b = rtl_read_byte(rtlpriv, CMDR);
rtl_write_byte(rtlpriv, CMDR, tmpu1b & (~TXDMA_EN));
udelay(2);
@@ -1004,7 +999,7 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
/* 3. Initialize MAC/PHY Config by MACPHY_reg.txt */
if (!rtl92s_phy_mac_config(hw)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "MAC Config failed\n");
+ pr_err("MAC Config failed\n");
err = rtstatus;
goto exit;
}
@@ -1024,7 +1019,7 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
/* 4. Initialize BB After MAC Config PHY_reg.txt, AGC_Tab.txt */
if (!rtl92s_phy_bb_config(hw)) {
- RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "BB Config failed\n");
+ pr_err("BB Config failed\n");
err = rtstatus;
goto exit;
}
@@ -1194,8 +1189,7 @@ static int _rtl92se_set_media_status(struct ieee80211_hw *hw,
"Set Network type to AP!\n");
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Network type %d not supported!\n", type);
+ pr_err("Network type %d not supported!\n", type);
return 1;
}
@@ -1685,8 +1679,7 @@ static void _rtl92se_read_adapter_info(struct ieee80211_hw *hw)
break;
case EEPROM_93C46:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "RTL819X Not boot from eeprom, check it !!\n");
+ pr_err("RTL819X Not boot from eeprom, check it !!\n");
return;
default:
@@ -2030,7 +2023,7 @@ void rtl92se_read_eeprom_info(struct ieee80211_hw *hw)
rtlefuse->autoload_failflag = false;
_rtl92se_read_adapter_info(hw);
} else {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Autoload ERR!!\n");
+ pr_err("Autoload ERR!!\n");
rtlefuse->autoload_failflag = true;
}
}
@@ -2463,8 +2456,7 @@ void rtl92se_set_key(struct ieee80211_hw *hw, u32 key_index, u8 *p_macaddr,
enc_algo = CAM_AES;
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", enc_algo);
+ pr_err("switch case %#x not processed\n", enc_algo);
enc_algo = CAM_TKIP;
break;
}
@@ -2481,9 +2473,7 @@ void rtl92se_set_key(struct ieee80211_hw *hw, u32 key_index, u8 *p_macaddr,
entry_id = rtl_cam_get_free_entry(hw,
p_macaddr);
if (entry_id >= TOTAL_CAM_ENTRY) {
- RT_TRACE(rtlpriv,
- COMP_SEC, DBG_EMERG,
- "Can not find free hw security cam entry\n");
+ pr_err("Can not find free hw security cam entry\n");
return;
}
} else {
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/led.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/led.c
index 8700078..b6b890f 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/led.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/led.c
@@ -63,8 +63,7 @@ void rtl92se_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled)
rtl_write_byte(rtlpriv, LEDCFG, ledcfg & 0x0f);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", pled->ledpin);
+ pr_err("switch case %#x not processed\n", pled->ledpin);
break;
}
pled->ledon = true;
@@ -99,8 +98,7 @@ void rtl92se_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled)
rtl_write_byte(rtlpriv, LEDCFG, (ledcfg | BIT(3)));
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", pled->ledpin);
+ pr_err("switch case %#x not processed\n", pled->ledpin);
break;
}
pled->ledon = false;
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c
index 6299dc1..927bc2d 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c
@@ -235,7 +235,6 @@ void rtl92s_phy_set_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath,
void rtl92s_phy_scan_operation_backup(struct ieee80211_hw *hw,
u8 operation)
{
- struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
if (!is_hal_stop(rtlhal)) {
@@ -247,8 +246,7 @@ void rtl92s_phy_scan_operation_backup(struct ieee80211_hw *hw,
rtl92s_phy_set_fw_cmd(hw, FW_CMD_RESUME_DM_BY_SCAN);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Unknown operation\n");
+ pr_err("Unknown operation\n");
break;
}
}
@@ -288,8 +286,7 @@ void rtl92s_phy_set_bw_mode(struct ieee80211_hw *hw,
rtl_write_byte(rtlpriv, BW_OPMODE, reg_bw_opmode);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
break;
}
@@ -313,8 +310,7 @@ void rtl92s_phy_set_bw_mode(struct ieee80211_hw *hw,
rtl_write_byte(rtlpriv, RFPGA0_ANALOGPARAMETER2, 0x18);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
break;
}
@@ -437,9 +433,8 @@ static bool _rtl92s_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw,
}
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n",
- currentcmd->cmdid);
+ pr_err("switch case %#x not processed\n",
+ currentcmd->cmdid);
break;
}
@@ -644,8 +639,7 @@ bool rtl92s_phy_set_rf_power_state(struct ieee80211_hw *hw,
_rtl92se_phy_set_rf_sleep(hw);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", rfpwr_state);
+ pr_err("switch case %#x not processed\n", rfpwr_state);
bresult = false;
break;
}
@@ -937,8 +931,7 @@ static bool _rtl92s_phy_bb_config_parafile(struct ieee80211_hw *hw)
}
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
- "Write BB Reg Fail!!\n");
+ pr_err("Write BB Reg Fail!!\n");
goto phy_BB8190_Config_ParaFile_Fail;
}
@@ -951,8 +944,7 @@ static bool _rtl92s_phy_bb_config_parafile(struct ieee80211_hw *hw)
BASEBAND_CONFIG_PHY_REG);
}
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
- "_rtl92s_phy_bb_config_parafile(): BB_PG Reg Fail!!\n");
+ pr_err("_rtl92s_phy_bb_config_parafile(): BB_PG Reg Fail!!\n");
goto phy_BB8190_Config_ParaFile_Fail;
}
@@ -1077,12 +1069,10 @@ bool rtl92s_phy_bb_config(struct ieee80211_hw *hw)
(rtlphy->rf_type == RF_1T2R && rf_num != 2) ||
(rtlphy->rf_type == RF_2T2R && rf_num != 2) ||
(rtlphy->rf_type == RF_2T2R_GREEN && rf_num != 2)) {
- RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
- "RF_Type(%x) does not match RF_Num(%x)!!\n",
- rtlphy->rf_type, rf_num);
- RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
- "path1 0x%x, path2 0x%x, pathmap 0x%x\n",
- path1, path2, pathmap);
+ pr_err("RF_Type(%x) does not match RF_Num(%x)!!\n",
+ rtlphy->rf_type, rf_num);
+ pr_err("path1 0x%x, path2 0x%x, pathmap 0x%x\n",
+ path1, path2, pathmap);
}
return rtstatus;
@@ -1221,7 +1211,7 @@ void rtl92s_phy_chk_fwcmd_iodone(struct ieee80211_hw *hw)
} while (--pollingcnt);
if (pollingcnt == 0)
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Set FW Cmd fail!!\n");
+ pr_err("Set FW Cmd fail!!\n");
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/rf.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/rf.c
index bd2fa77..ea5b8ec 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/rf.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/rf.c
@@ -523,8 +523,7 @@ void rtl92s_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
rtlphy->rfreg_chnlval[0]);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", bandwidth);
+ pr_err("unknown bandwidth: %#X\n", bandwidth);
break;
}
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/sw.c
index 998cefb..3c66d00 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/sw.c
@@ -96,8 +96,7 @@ static void rtl92se_fw_cb(const struct firmware *firmware, void *context)
return;
}
if (firmware->size > rtlpriv->max_fw_size) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Firmware is too big!\n");
+ pr_err("Firmware is too big!\n");
rtlpriv->max_fw_size = 0;
release_firmware(firmware);
return;
@@ -218,8 +217,7 @@ static int rtl92s_init_sw_vars(struct ieee80211_hw *hw)
rtlpriv->io.dev, GFP_KERNEL, hw,
rtl92se_fw_cb);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to request firmware!\n");
+ pr_err("Failed to request firmware!\n");
return 1;
}
@@ -299,7 +297,7 @@ static struct rtl_mod_params rtl92se_mod_params = {
.inactiveps = true,
.swctrl_lps = true,
.fwctrl_lps = false,
- .debug = DBG_EMERG,
+ .debug = 0,
};
/* Because memory R/W bursting will cause system hang/crash
--
2.10.2
^ permalink raw reply related
* [PATCH 07/14] rtlwifi_new: rtl8723-common: Remove all instances of DBG_EMERG
From: Larry Finger @ 2016-12-11 5:45 UTC (permalink / raw)
To: kvalo; +Cc: devel, linux-wireless, Larry Finger, Ping-Ke Shih
In-Reply-To: <20161211054523.7119-1-Larry.Finger@lwfinger.net>
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
---
.../net/wireless/realtek/rtlwifi/rtl8723com/fw_common.c | 16 ++++++----------
.../net/wireless/realtek/rtlwifi/rtl8723com/phy_common.c | 4 ++--
2 files changed, 8 insertions(+), 12 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723com/fw_common.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723com/fw_common.c
index 108475e..a9cc67e 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723com/fw_common.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723com/fw_common.c
@@ -129,8 +129,7 @@ void rtl8723_write_fw(struct ieee80211_hw *hw,
remain_size = size % FW_8192C_PAGE_SIZE;
if (page_nums > max_page) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Page numbers should not greater than %d\n", max_page);
+ pr_err("Page numbers should not greater than %d\n", max_page);
}
for (page = 0; page < page_nums; page++) {
offset = page * FW_8192C_PAGE_SIZE;
@@ -209,9 +208,8 @@ int rtl8723_fw_free_to_go(struct ieee80211_hw *hw, bool is_8723be,
(!(value32 & FWDL_CHKSUM_RPT)));
if (counter >= max_count) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "chksum report fail ! REG_MCUFWDL:0x%08x .\n",
- value32);
+ pr_err("chksum report fail ! REG_MCUFWDL:0x%08x .\n",
+ value32);
goto exit;
}
RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
@@ -239,9 +237,8 @@ int rtl8723_fw_free_to_go(struct ieee80211_hw *hw, bool is_8723be,
} while (counter++ < max_count);
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Polling FW ready fail!! REG_MCUFWDL:0x%08x .\n",
- value32);
+ pr_err("Polling FW ready fail!! REG_MCUFWDL:0x%08x .\n",
+ value32);
exit:
return err;
@@ -294,8 +291,7 @@ int rtl8723_download_fw(struct ieee80211_hw *hw,
err = rtl8723_fw_free_to_go(hw, is_8723be, max_count);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Firmware is not ready to run!\n");
+ pr_err("Firmware is not ready to run!\n");
} else {
RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
"Firmware is ready to run!\n");
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723com/phy_common.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723com/phy_common.c
index 6b80ddc..7503cf7 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723com/phy_common.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723com/phy_common.c
@@ -99,7 +99,7 @@ u32 rtl8723_phy_rf_serial_read(struct ieee80211_hw *hw,
offset &= 0xff;
newoffset = offset;
if (RT_CANNOT_IO(hw)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "return all one\n");
+ pr_err("return all one\n");
return 0xFFFFFFFF;
}
tmplong = rtl_get_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD);
@@ -147,7 +147,7 @@ void rtl8723_phy_rf_serial_write(struct ieee80211_hw *hw,
struct bb_reg_def *pphyreg = &rtlphy->phyreg_def[rfpath];
if (RT_CANNOT_IO(hw)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "stop\n");
+ pr_err("rtl8723: stop\n");
return;
}
offset &= 0xff;
--
2.10.2
^ permalink raw reply related
* [PATCH 07/14] rtlwifi: rtl8723-common: Remove all instances of DBG_EMERG
From: Larry Finger @ 2016-12-11 5:45 UTC (permalink / raw)
To: kvalo; +Cc: devel, linux-wireless, Larry Finger, Ping-Ke Shih
In-Reply-To: <20161211054523.7119-1-Larry.Finger@lwfinger.net>
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
---
.../net/wireless/realtek/rtlwifi/rtl8723com/fw_common.c | 16 ++++++----------
.../net/wireless/realtek/rtlwifi/rtl8723com/phy_common.c | 4 ++--
2 files changed, 8 insertions(+), 12 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723com/fw_common.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723com/fw_common.c
index 108475e..a9cc67e 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723com/fw_common.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723com/fw_common.c
@@ -129,8 +129,8 @@ void rtl8723_write_fw(struct ieee80211_hw *hw,
remain_size = size % FW_8192C_PAGE_SIZE;
if (page_nums > max_page) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Page numbers should not greater than %d\n", max_page);
+ pr_err("rtl8723-common: Page numbers should not greater than %d\n",
+ max_page);
}
for (page = 0; page < page_nums; page++) {
offset = page * FW_8192C_PAGE_SIZE;
@@ -209,9 +208,8 @@ int rtl8723_fw_free_to_go(struct ieee80211_hw *hw, bool is_8723be,
(!(value32 & FWDL_CHKSUM_RPT)));
if (counter >= max_count) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "chksum report fail ! REG_MCUFWDL:0x%08x .\n",
- value32);
+ pr_err("rtl8723-common: chksum report fail ! REG_MCUFWDL:0x%08x .\n",
+ value32);
goto exit;
}
RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
@@ -239,9 +237,8 @@ int rtl8723_fw_free_to_go(struct ieee80211_hw *hw, bool is_8723be,
} while (counter++ < max_count);
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Polling FW ready fail!! REG_MCUFWDL:0x%08x .\n",
- value32);
+ pr_err("rtl8723-common: Polling FW ready fail!! REG_MCUFWDL:0x%08x .\n",
+ value32);
exit:
return err;
@@ -294,8 +291,7 @@ int rtl8723_download_fw(struct ieee80211_hw *hw,
err = rtl8723_fw_free_to_go(hw, is_8723be, max_count);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Firmware is not ready to run!\n");
+ pr_err("rtl8723-common: Firmware is not ready to run!\n");
} else {
RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
"Firmware is ready to run!\n");
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723com/phy_common.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723com/phy_common.c
index 0adae58..91a1ef0 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723com/phy_common.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723com/phy_common.c
@@ -99,7 +99,7 @@ u32 rtl8723_phy_rf_serial_read(struct ieee80211_hw *hw,
offset &= 0xff;
newoffset = offset;
if (RT_CANNOT_IO(hw)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "return all one\n");
+ pr_err("rtl8723-common: return all one\n");
return 0xFFFFFFFF;
}
tmplong = rtl_get_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD);
@@ -147,7 +147,7 @@ void rtl8723_phy_rf_serial_write(struct ieee80211_hw *hw,
struct bb_reg_def *pphyreg = &rtlphy->phyreg_def[rfpath];
if (RT_CANNOT_IO(hw)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "stop\n");
+ pr_err("rtl8723-common: rtl8723: stop\n");
return;
}
offset &= 0xff;
--
2.10.2
^ permalink raw reply related
* [PATCH 06/14] rtlwifi: rtl8192ee: Remove all instances of DBG_EMERG
From: Larry Finger @ 2016-12-11 5:45 UTC (permalink / raw)
To: kvalo; +Cc: devel, linux-wireless, Larry Finger, Ping-Ke Shih
In-Reply-To: <20161211054523.7119-1-Larry.Finger@lwfinger.net>
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
---
.../net/wireless/realtek/rtlwifi/rtl8192ee/fw.c | 21 ++++++++-------------
.../net/wireless/realtek/rtlwifi/rtl8192ee/hw.c | 11 ++++-------
.../net/wireless/realtek/rtlwifi/rtl8192ee/phy.c | 22 +++++++++-------------
.../net/wireless/realtek/rtlwifi/rtl8192ee/rf.c | 3 +--
.../net/wireless/realtek/rtlwifi/rtl8192ee/sw.c | 8 +++-----
5 files changed, 25 insertions(+), 40 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/fw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/fw.c
index c2dc26d..27f9608 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/fw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/fw.c
@@ -122,10 +122,8 @@ static void _rtl92ee_write_fw(struct ieee80211_hw *hw,
pagenums = size / FW_8192C_PAGE_SIZE;
remainsize = size % FW_8192C_PAGE_SIZE;
- if (pagenums > 8) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Page numbers should not greater then 8\n");
- }
+ if (pagenums > 8)
+ pr_err("rtl8192ee: Page numbers should not greater then 8\n");
for (page = 0; page < pagenums; page++) {
offset = page * FW_8192C_PAGE_SIZE;
@@ -155,14 +153,13 @@ static int _rtl92ee_fw_free_to_go(struct ieee80211_hw *hw)
(!(value32 & FWDL_CHKSUM_RPT)));
if (counter >= FW_8192C_POLLING_TIMEOUT_COUNT) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "chksum report faill ! REG_MCUFWDL:0x%08x .\n",
- value32);
+ pr_err("rtl8192ee: chksum report fail! REG_MCUFWDL:0x%08x\n",
+ value32);
goto exit;
}
RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
- "Checksum report OK ! REG_MCUFWDL:0x%08x .\n", value32);
+ "Checksum report OK! REG_MCUFWDL:0x%08x\n", value32);
value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
value32 |= MCUFWDL_RDY;
@@ -186,9 +183,8 @@ static int _rtl92ee_fw_free_to_go(struct ieee80211_hw *hw)
} while (counter++ < FW_8192C_POLLING_TIMEOUT_COUNT);
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Polling FW ready fail!! REG_MCUFWDL:0x%08x. count = %d\n",
- value32, counter);
+ pr_err("rtl8192ee: Polling FW ready fail!! REG_MCUFWDL:0x%08x. count = %d\n",
+ value32, counter);
exit:
return err;
@@ -241,8 +237,7 @@ int rtl92ee_download_fw(struct ieee80211_hw *hw, bool buse_wake_on_wlan_fw)
err = _rtl92ee_fw_free_to_go(hw);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Firmware is not ready to run!\n");
+ pr_err("rtl8192ee: Firmware is not ready to run!\n");
} else {
RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD ,
"Firmware is ready to run!\n");
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/hw.c
index bd416b8..c2a7666 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/hw.c
@@ -1320,7 +1320,7 @@ int rtl92ee_hw_init(struct ieee80211_hw *hw)
rtl_write_byte(rtlpriv, 0x65, 1);
}
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Init MAC failed\n");
+ pr_err("rtl8192ee: Init MAC failed\n");
err = 1;
return err;
}
@@ -1485,8 +1485,7 @@ static int _rtl92ee_set_media_status(struct ieee80211_hw *hw,
"Set Network type to AP!\n");
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Network type %d not support!\n", type);
+ pr_err("rtl8192ee: Network type %d not support!\n", type);
return 1;
}
@@ -2206,7 +2205,7 @@ void rtl92ee_read_eeprom_info(struct ieee80211_hw *hw)
rtlefuse->autoload_failflag = false;
_rtl92ee_read_adapter_info(hw);
} else {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Autoload ERR!!\n");
+ pr_err("rtl8192ee: Autoload ERR!!\n");
}
_rtl92ee_hal_customized_behavior(hw);
@@ -2484,9 +2483,7 @@ void rtl92ee_set_key(struct ieee80211_hw *hw, u32 key_index,
entry_id = rtl_cam_get_free_entry(hw,
p_macaddr);
if (entry_id >= TOTAL_CAM_ENTRY) {
- RT_TRACE(rtlpriv, COMP_SEC,
- DBG_EMERG,
- "Can not find free hw security cam entry\n");
+ pr_err("rtl8192ee: Can not find free hw security cam entry\n");
return;
}
} else {
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/phy.c
index 5e476af..e95efba 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/phy.c
@@ -170,7 +170,7 @@ static u32 _rtl92ee_phy_rf_serial_read(struct ieee80211_hw *hw,
offset &= 0xff;
newoffset = offset;
if (RT_CANNOT_IO(hw)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "return all one\n");
+ pr_err("rtl8192ee: return all one\n");
return 0xFFFFFFFF;
}
tmplong = rtl_get_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD);
@@ -214,7 +214,7 @@ static void _rtl92ee_phy_rf_serial_write(struct ieee80211_hw *hw,
struct bb_reg_def *pphyreg = &rtlphy->phyreg_def[rfpath];
if (RT_CANNOT_IO(hw)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "stop\n");
+ pr_err("rtl8192ee: stop\n");
return;
}
offset &= 0xff;
@@ -650,7 +650,7 @@ static bool _rtl92ee_phy_bb8192ee_config_parafile(struct ieee80211_hw *hw)
rtstatus = phy_config_bb_with_hdr_file(hw, BASEBAND_CONFIG_PHY_REG);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Write BB Reg Fail!!\n");
+ pr_err("rtl8192ee: Write BB Reg Fail!!\n");
return false;
}
@@ -662,12 +662,12 @@ static bool _rtl92ee_phy_bb8192ee_config_parafile(struct ieee80211_hw *hw)
}
_rtl92ee_phy_txpower_by_rate_configuration(hw);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "BB_PG Reg Fail!!\n");
+ pr_err("rtl8192ee: BB_PG Reg Fail!!\n");
return false;
}
rtstatus = phy_config_bb_with_hdr_file(hw, BASEBAND_CONFIG_AGC_TAB);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "AGC Table Fail\n");
+ pr_err("rtl8192ee: AGC Table Fail\n");
return false;
}
rtlphy->cck_high_power = (bool)(rtl_get_bbreg(hw,
@@ -1675,8 +1675,7 @@ void rtl92ee_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation)
(u8 *)&iotype);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Unknown Scan Backup operation.\n");
+ pr_err("rtl8192ee: Unknown Scan Backup operation.\n");
break;
}
}
@@ -1717,8 +1716,8 @@ void rtl92ee_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_prsr_rsc);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("rtl8192ee: unknown bandwidth: %#X\n",
+ rtlphy->current_chan_bw);
break;
}
@@ -1742,8 +1740,8 @@ void rtl92ee_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
HAL_PRIME_CHNL_OFFSET_LOWER) ? 2 : 1);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("rtl8192ee: unknown bandwidth: %#X\n",
+ rtlphy->current_chan_bw);
break;
}
rtl92ee_phy_rf6052_set_bandwidth(hw, rtlphy->current_chan_bw);
@@ -1884,8 +1881,8 @@ static bool _rtl92ee_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw,
currentcmd = &postcommoncmd[*step];
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Invalid 'stage' = %d, Check it!\n" , *stage);
+ pr_err("rtl8192ee: Invalid 'stage' = %d, Check it!\n",
+ *stage);
return true;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/rf.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/rf.c
index 73716c0..bc76a91 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/rf.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/rf.c
@@ -55,8 +55,7 @@ void rtl92ee_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
rtlphy->rfreg_chnlval[0]);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", bandwidth);
+ pr_err("rtl8192ee: unknown bandwidth: %#X\n", bandwidth);
break;
}
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/sw.c
index 46b605de3..eddc704 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/sw.c
@@ -165,8 +165,7 @@ int rtl92ee_init_sw_vars(struct ieee80211_hw *hw)
/* for firmware buf */
rtlpriv->rtlhal.pfirmware = vzalloc(0x8000);
if (!rtlpriv->rtlhal.pfirmware) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Can't alloc buffer for fw\n");
+ pr_err("rtl8192ee: Can't alloc buffer for fw\n");
return 1;
}
@@ -179,8 +178,7 @@ int rtl92ee_init_sw_vars(struct ieee80211_hw *hw)
rtlpriv->io.dev, GFP_KERNEL, hw,
rtl_fw_cb);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to request firmware!\n");
+ pr_err("rtl8192ee: Failed to request firmware!\n");
return 1;
}
@@ -260,7 +258,7 @@ static struct rtl_mod_params rtl92ee_mod_params = {
.swctrl_lps = false,
.fwctrl_lps = true,
.msi_support = true,
- .debug = DBG_EMERG,
+ .debug = 0,
};
static const struct rtl_hal_cfg rtl92ee_hal_cfg = {
--
2.10.2
^ permalink raw reply related
* [PATCH 06/14] rtlwifi_new: rtl8192ee: Remove all instances of DBG_EMERG
From: Larry Finger @ 2016-12-11 5:45 UTC (permalink / raw)
To: kvalo; +Cc: devel, linux-wireless, Larry Finger, Ping-Ke Shih
In-Reply-To: <20161211054523.7119-1-Larry.Finger@lwfinger.net>
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
---
.../net/wireless/realtek/rtlwifi/rtl8192ee/fw.c | 21 ++++++++-------------
.../net/wireless/realtek/rtlwifi/rtl8192ee/hw.c | 11 ++++-------
.../net/wireless/realtek/rtlwifi/rtl8192ee/phy.c | 22 +++++++++-------------
.../net/wireless/realtek/rtlwifi/rtl8192ee/rf.c | 3 +--
.../net/wireless/realtek/rtlwifi/rtl8192ee/sw.c | 8 +++-----
5 files changed, 25 insertions(+), 40 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/fw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/fw.c
index 9dfd74b..2959746 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/fw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/fw.c
@@ -122,10 +122,8 @@ static void _rtl92ee_write_fw(struct ieee80211_hw *hw,
pagenums = size / FW_8192C_PAGE_SIZE;
remainsize = size % FW_8192C_PAGE_SIZE;
- if (pagenums > 8) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Page numbers should not greater then 8\n");
- }
+ if (pagenums > 8)
+ pr_err("Page numbers should not greater then 8\n");
for (page = 0; page < pagenums; page++) {
offset = page * FW_8192C_PAGE_SIZE;
@@ -155,14 +153,13 @@ static int _rtl92ee_fw_free_to_go(struct ieee80211_hw *hw)
(!(value32 & FWDL_CHKSUM_RPT)));
if (counter >= FW_8192C_POLLING_TIMEOUT_COUNT) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "chksum report faill ! REG_MCUFWDL:0x%08x .\n",
- value32);
+ pr_err("chksum report fail! REG_MCUFWDL:0x%08x\n",
+ value32);
goto exit;
}
RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
- "Checksum report OK ! REG_MCUFWDL:0x%08x .\n", value32);
+ "Checksum report OK! REG_MCUFWDL:0x%08x\n", value32);
value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
value32 |= MCUFWDL_RDY;
@@ -186,9 +183,8 @@ static int _rtl92ee_fw_free_to_go(struct ieee80211_hw *hw)
} while (counter++ < FW_8192C_POLLING_TIMEOUT_COUNT);
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Polling FW ready fail!! REG_MCUFWDL:0x%08x. count = %d\n",
- value32, counter);
+ pr_err("Polling FW ready fail!! REG_MCUFWDL:0x%08x. count = %d\n",
+ value32, counter);
exit:
return err;
@@ -241,8 +237,7 @@ int rtl92ee_download_fw(struct ieee80211_hw *hw, bool buse_wake_on_wlan_fw)
err = _rtl92ee_fw_free_to_go(hw);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Firmware is not ready to run!\n");
+ pr_err("Firmware is not ready to run!\n");
} else {
RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD ,
"Firmware is ready to run!\n");
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/hw.c
index 00b211b..f731f96 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/hw.c
@@ -1320,7 +1320,7 @@ int rtl92ee_hw_init(struct ieee80211_hw *hw)
rtl_write_byte(rtlpriv, 0x65, 1);
}
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Init MAC failed\n");
+ pr_err("Init MAC failed\n");
err = 1;
return err;
}
@@ -1485,8 +1485,7 @@ static int _rtl92ee_set_media_status(struct ieee80211_hw *hw,
"Set Network type to AP!\n");
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Network type %d not support!\n", type);
+ pr_err("Network type %d not support!\n", type);
return 1;
}
@@ -2206,7 +2205,7 @@ void rtl92ee_read_eeprom_info(struct ieee80211_hw *hw)
rtlefuse->autoload_failflag = false;
_rtl92ee_read_adapter_info(hw);
} else {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Autoload ERR!!\n");
+ pr_err("Autoload ERR!!\n");
}
_rtl92ee_hal_customized_behavior(hw);
@@ -2484,9 +2483,7 @@ void rtl92ee_set_key(struct ieee80211_hw *hw, u32 key_index,
entry_id = rtl_cam_get_free_entry(hw,
p_macaddr);
if (entry_id >= TOTAL_CAM_ENTRY) {
- RT_TRACE(rtlpriv, COMP_SEC,
- DBG_EMERG,
- "Can not find free hw security cam entry\n");
+ pr_err("Can not find free hw security cam entry\n");
return;
}
} else {
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/phy.c
index c35ba76..9ced157 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/phy.c
@@ -170,7 +170,7 @@ static u32 _rtl92ee_phy_rf_serial_read(struct ieee80211_hw *hw,
offset &= 0xff;
newoffset = offset;
if (RT_CANNOT_IO(hw)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "return all one\n");
+ pr_err("return all one\n");
return 0xFFFFFFFF;
}
tmplong = rtl_get_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD);
@@ -214,7 +214,7 @@ static void _rtl92ee_phy_rf_serial_write(struct ieee80211_hw *hw,
struct bb_reg_def *pphyreg = &rtlphy->phyreg_def[rfpath];
if (RT_CANNOT_IO(hw)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "stop\n");
+ pr_err("stop\n");
return;
}
offset &= 0xff;
@@ -650,7 +650,7 @@ static bool _rtl92ee_phy_bb8192ee_config_parafile(struct ieee80211_hw *hw)
rtstatus = phy_config_bb_with_hdr_file(hw, BASEBAND_CONFIG_PHY_REG);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Write BB Reg Fail!!\n");
+ pr_err("Write BB Reg Fail!!\n");
return false;
}
@@ -662,12 +662,12 @@ static bool _rtl92ee_phy_bb8192ee_config_parafile(struct ieee80211_hw *hw)
}
_rtl92ee_phy_txpower_by_rate_configuration(hw);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "BB_PG Reg Fail!!\n");
+ pr_err("BB_PG Reg Fail!!\n");
return false;
}
rtstatus = phy_config_bb_with_hdr_file(hw, BASEBAND_CONFIG_AGC_TAB);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "AGC Table Fail\n");
+ pr_err("AGC Table Fail\n");
return false;
}
rtlphy->cck_high_power = (bool)(rtl_get_bbreg(hw,
@@ -1675,8 +1675,7 @@ void rtl92ee_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation)
(u8 *)&iotype);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Unknown Scan Backup operation.\n");
+ pr_err("Unknown Scan Backup operation.\n");
break;
}
}
@@ -1717,8 +1716,7 @@ void rtl92ee_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_prsr_rsc);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
break;
}
@@ -1742,8 +1740,7 @@ void rtl92ee_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
HAL_PRIME_CHNL_OFFSET_LOWER) ? 2 : 1);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
break;
}
rtl92ee_phy_rf6052_set_bandwidth(hw, rtlphy->current_chan_bw);
@@ -1884,8 +1881,7 @@ static bool _rtl92ee_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw,
currentcmd = &postcommoncmd[*step];
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Invalid 'stage' = %d, Check it!\n" , *stage);
+ pr_err("Invalid 'stage' = %d, Check it!\n", *stage);
return true;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/rf.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/rf.c
index 73716c0..bc76a91 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/rf.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/rf.c
@@ -55,8 +55,7 @@ void rtl92ee_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
rtlphy->rfreg_chnlval[0]);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", bandwidth);
+ pr_err("unknown bandwidth: %#X\n", bandwidth);
break;
}
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/sw.c
index 46b605de3..eddc704 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/sw.c
@@ -165,8 +165,7 @@ int rtl92ee_init_sw_vars(struct ieee80211_hw *hw)
/* for firmware buf */
rtlpriv->rtlhal.pfirmware = vzalloc(0x8000);
if (!rtlpriv->rtlhal.pfirmware) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Can't alloc buffer for fw\n");
+ pr_err("Can't alloc buffer for fw\n");
return 1;
}
@@ -179,8 +178,7 @@ int rtl92ee_init_sw_vars(struct ieee80211_hw *hw)
rtlpriv->io.dev, GFP_KERNEL, hw,
rtl_fw_cb);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to request firmware!\n");
+ pr_err("Failed to request firmware!\n");
return 1;
}
@@ -260,7 +258,7 @@ static struct rtl_mod_params rtl92ee_mod_params = {
.swctrl_lps = false,
.fwctrl_lps = true,
.msi_support = true,
- .debug = DBG_EMERG,
+ .debug = 0,
};
static const struct rtl_hal_cfg rtl92ee_hal_cfg = {
--
2.10.2
^ permalink raw reply related
* [PATCH 05/14] rtlwifi: rtl8723ae: Remove all instances of DBG_EMERG
From: Larry Finger @ 2016-12-11 5:45 UTC (permalink / raw)
To: kvalo; +Cc: devel, linux-wireless, Larry Finger, Ping-Ke Shih
In-Reply-To: <20161211054523.7119-1-Larry.Finger@lwfinger.net>
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
---
drivers/net/wireless/realtek/rtlwifi/rtl8723ae/fw.c | 9 +++------
drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c | 19 +++++++------------
drivers/net/wireless/realtek/rtlwifi/rtl8723ae/led.c | 6 ++----
drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c | 18 +++++++-----------
drivers/net/wireless/realtek/rtlwifi/rtl8723ae/rf.c | 3 +--
drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c | 8 +++-----
6 files changed, 23 insertions(+), 40 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/fw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/fw.c
index 2f398da..9136fb3 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/fw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/fw.c
@@ -99,8 +99,7 @@ static void _rtl8723e_fill_h2c_command(struct ieee80211_hw *hw, u8 element_id,
while (!bwrite_sucess) {
wait_writeh2c_limmit--;
if (wait_writeh2c_limmit == 0) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Write H2C fail because no trigger for FW INT!\n");
+ pr_err("rtl8723ae: Write H2C fail because no trigger for FW INT!\n");
break;
}
@@ -123,8 +122,8 @@ static void _rtl8723e_fill_h2c_command(struct ieee80211_hw *hw, u8 element_id,
box_extreg = REG_HMEBOX_EXT_3;
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", boxnum);
+ pr_err("rtl8723ae: switch case %#x not processed\n",
+ boxnum);
break;
}
@@ -229,8 +227,8 @@ static void _rtl8723e_fill_h2c_command(struct ieee80211_hw *hw, u8 element_id,
}
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", cmd_len);
+ pr_err("rtl8723ae: switch case %#x not processed\n",
+ cmd_len);
break;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c
index 6c51483..dff9ebb 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c
@@ -570,9 +570,8 @@ static bool _rtl8723e_llt_write(struct ieee80211_hw *hw, u32 address, u32 data)
break;
if (count > POLLING_LLT_THRESHOLD) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to polling write LLT done at address %d!\n",
- address);
+ pr_err("rtl8723ae: Failed to polling write LLT done at address %d!\n",
+ address);
status = false;
break;
}
@@ -961,7 +960,7 @@ int rtl8723e_hw_init(struct ieee80211_hw *hw)
rtlpriv->intf_ops->disable_aspm(hw);
rtstatus = _rtl8712e_init_mac(hw);
if (rtstatus != true) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Init MAC failed\n");
+ pr_err("rtl8723ae: Init MAC failed\n");
err = 1;
goto exit;
}
@@ -1107,8 +1106,7 @@ static enum version_8723e _rtl8723e_read_chip_version(struct ieee80211_hw *hw)
"Chip Version ID: VERSION_NORMAL_UMC_CHIP_8723_1T1R_B_CUT.\n");
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Chip Version ID: Unknown. Bug?\n");
+ pr_err("rtl8723ae: Chip Version ID: Unknown. Bug?\n");
break;
}
@@ -1157,8 +1155,7 @@ static int _rtl8723e_set_media_status(struct ieee80211_hw *hw,
"Set Network type to AP!\n");
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Network type %d not support!\n", type);
+ pr_err("rtl8723ae: Network type %d not support!\n", type);
return 1;
break;
}
@@ -1852,7 +1849,7 @@ void rtl8723e_read_eeprom_info(struct ieee80211_hw *hw)
} else {
rtlefuse->autoload_failflag = true;
_rtl8723e_read_adapter_info(hw, false);
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Autoload ERR!!\n");
+ pr_err("rtl8723ae: Autoload ERR!!\n");
}
_rtl8723e_hal_customized_behavior(hw);
}
@@ -2245,9 +2242,7 @@ void rtl8723e_set_key(struct ieee80211_hw *hw, u32 key_index,
entry_id =
rtl_cam_get_free_entry(hw, p_macaddr);
if (entry_id >= TOTAL_CAM_ENTRY) {
- RT_TRACE(rtlpriv, COMP_SEC,
- DBG_EMERG,
- "Can not find free hw security cam entry\n");
+ pr_err("rtl8723ae: Can not find free hw security cam entry\n");
return;
}
} else {
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/led.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/led.c
index 77c1004..c2a6b2c 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/led.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/led.c
@@ -58,8 +58,8 @@ void rtl8723e_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled)
rtl_write_byte(rtlpriv, REG_LEDCFG1, ledcfg & 0x10);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", pled->ledpin);
+ pr_err("rtl8723ae: switch case %#x not processed\n",
+ pled->ledpin);
break;
}
pled->ledon = true;
@@ -100,8 +99,8 @@ void rtl8723e_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled)
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", pled->ledpin);
+ pr_err("rtl8723ae: switch case %#x not processed\n",
+ pled->ledpin);
break;
}
pled->ledon = false;
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c
index 5dd4c74..25615e1 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c
@@ -213,7 +213,7 @@ static bool _rtl8723e_phy_bb8192c_config_parafile(struct ieee80211_hw *hw)
rtstatus = _rtl8723e_phy_config_bb_with_headerfile(hw,
BASEBAND_CONFIG_PHY_REG);
if (rtstatus != true) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Write BB Reg Fail!!\n");
+ pr_err("rtl8723ae: Write BB Reg Fail!!\n");
return false;
}
@@ -227,13 +227,13 @@ static bool _rtl8723e_phy_bb8192c_config_parafile(struct ieee80211_hw *hw)
BASEBAND_CONFIG_PHY_REG);
}
if (rtstatus != true) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "BB_PG Reg Fail!!\n");
+ pr_err("rtl8723ae: BB_PG Reg Fail!!\n");
return false;
}
rtstatus =
_rtl8723e_phy_config_bb_with_headerfile(hw, BASEBAND_CONFIG_AGC_TAB);
if (rtstatus != true) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "AGC Table Fail\n");
+ pr_err("rtl8723ae: AGC Table Fail\n");
return false;
}
rtlphy->cck_high_power = (bool) (rtl_get_bbreg(hw,
@@ -749,8 +749,7 @@ void rtl8723e_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation)
(u8 *)&iotype);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Unknown Scan Backup operation.\n");
+ pr_err("rtl8723ae: Unknown Scan Backup operation.\n");
break;
}
}
@@ -791,8 +790,8 @@ void rtl8723e_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_prsr_rsc);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("rtl8723ae: unknown bandwidth: %#X\n",
+ rtlphy->current_chan_bw);
break;
}
@@ -816,8 +814,8 @@ void rtl8723e_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
HAL_PRIME_CHNL_OFFSET_LOWER) ? 2 : 1);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("rtl8723ae: unknown bandwidth: %#X\n",
+ rtlphy->current_chan_bw);
break;
}
rtl8723e_phy_rf6052_set_bandwidth(hw, rtlphy->current_chan_bw);
@@ -977,8 +974,8 @@ static bool _rtl8723e_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw,
currentcmd = &postcommoncmd[*step];
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Invalid 'stage' = %d, Check it!\n", *stage);
+ pr_err("rtl8723ae: Invalid 'stage' = %d, Check it!\n",
+ *stage);
return true;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/rf.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/rf.c
index 4227717..89958b6 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/rf.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/rf.c
@@ -51,8 +51,7 @@ void rtl8723e_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
rtlphy->rfreg_chnlval[0]);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", bandwidth);
+ pr_err("rtl8723ae: unknown bandwidth: %#X\n", bandwidth);
break;
}
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c
index c51a9e8..401f542 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c
@@ -172,8 +172,7 @@ int rtl8723e_init_sw_vars(struct ieee80211_hw *hw)
/* for firmware buf */
rtlpriv->rtlhal.pfirmware = vzalloc(0x6000);
if (!rtlpriv->rtlhal.pfirmware) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Can't alloc buffer for fw.\n");
+ pr_err("rtl8723ae: Can't alloc buffer for fw.\n");
return 1;
}
@@ -186,8 +185,7 @@ int rtl8723e_init_sw_vars(struct ieee80211_hw *hw)
rtlpriv->io.dev, GFP_KERNEL, hw,
rtl_fw_cb);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to request firmware!\n");
+ pr_err("rtl8723ae: Failed to request firmware!\n");
return 1;
}
return 0;
@@ -270,7 +268,7 @@ static struct rtl_mod_params rtl8723e_mod_params = {
.inactiveps = true,
.swctrl_lps = false,
.fwctrl_lps = true,
- .debug = DBG_EMERG,
+ .debug = 0,
.msi_support = false,
.disable_watchdog = false,
};
--
2.10.2
^ permalink raw reply related
* [PATCH 05/14] rtlwifi_new: rtl8723ae: Remove all instances of DBG_EMERG
From: Larry Finger @ 2016-12-11 5:45 UTC (permalink / raw)
To: kvalo; +Cc: devel, linux-wireless, Larry Finger, Ping-Ke Shih
In-Reply-To: <20161211054523.7119-1-Larry.Finger@lwfinger.net>
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
---
drivers/net/wireless/realtek/rtlwifi/rtl8723ae/fw.c | 9 +++------
drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c | 19 +++++++------------
drivers/net/wireless/realtek/rtlwifi/rtl8723ae/led.c | 6 ++----
drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c | 18 +++++++-----------
drivers/net/wireless/realtek/rtlwifi/rtl8723ae/rf.c | 3 +--
drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c | 8 +++-----
6 files changed, 23 insertions(+), 40 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/fw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/fw.c
index 164a27e..25a950e 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/fw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/fw.c
@@ -99,8 +99,7 @@ static void _rtl8723e_fill_h2c_command(struct ieee80211_hw *hw, u8 element_id,
while (!bwrite_sucess) {
wait_writeh2c_limmit--;
if (wait_writeh2c_limmit == 0) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Write H2C fail because no trigger for FW INT!\n");
+ pr_err("Write H2C fail because no trigger for FW INT!\n");
break;
}
@@ -123,8 +122,7 @@ static void _rtl8723e_fill_h2c_command(struct ieee80211_hw *hw, u8 element_id,
box_extreg = REG_HMEBOX_EXT_3;
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", boxnum);
+ pr_err("switch case %#x not processed\n", boxnum);
break;
}
@@ -229,8 +227,7 @@ static void _rtl8723e_fill_h2c_command(struct ieee80211_hw *hw, u8 element_id,
}
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", cmd_len);
+ pr_err("switch case %#x not processed\n", cmd_len);
break;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c
index e0da8dc..bb9de2f 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c
@@ -570,9 +570,8 @@ static bool _rtl8723e_llt_write(struct ieee80211_hw *hw, u32 address, u32 data)
break;
if (count > POLLING_LLT_THRESHOLD) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to polling write LLT done at address %d!\n",
- address);
+ pr_err("Failed to polling write LLT done at address %d!\n",
+ address);
status = false;
break;
}
@@ -961,7 +960,7 @@ int rtl8723e_hw_init(struct ieee80211_hw *hw)
rtlpriv->intf_ops->disable_aspm(hw);
rtstatus = _rtl8712e_init_mac(hw);
if (rtstatus != true) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Init MAC failed\n");
+ pr_err("Init MAC failed\n");
err = 1;
goto exit;
}
@@ -1107,8 +1106,7 @@ static enum version_8723e _rtl8723e_read_chip_version(struct ieee80211_hw *hw)
"Chip Version ID: VERSION_NORMAL_UMC_CHIP_8723_1T1R_B_CUT.\n");
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Chip Version ID: Unknown. Bug?\n");
+ pr_err("Chip Version ID: Unknown. Bug?\n");
break;
}
@@ -1157,8 +1155,7 @@ static int _rtl8723e_set_media_status(struct ieee80211_hw *hw,
"Set Network type to AP!\n");
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Network type %d not support!\n", type);
+ pr_err("Network type %d not support!\n", type);
return 1;
break;
}
@@ -1852,7 +1849,7 @@ void rtl8723e_read_eeprom_info(struct ieee80211_hw *hw)
} else {
rtlefuse->autoload_failflag = true;
_rtl8723e_read_adapter_info(hw, false);
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Autoload ERR!!\n");
+ pr_err("Autoload ERR!!\n");
}
_rtl8723e_hal_customized_behavior(hw);
}
@@ -2245,9 +2242,7 @@ void rtl8723e_set_key(struct ieee80211_hw *hw, u32 key_index,
entry_id =
rtl_cam_get_free_entry(hw, p_macaddr);
if (entry_id >= TOTAL_CAM_ENTRY) {
- RT_TRACE(rtlpriv, COMP_SEC,
- DBG_EMERG,
- "Can not find free hw security cam entry\n");
+ pr_err("Can not find free hw security cam entry\n");
return;
}
} else {
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/led.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/led.c
index 77c1004..c2a6b2c 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/led.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/led.c
@@ -58,8 +58,7 @@ void rtl8723e_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled)
rtl_write_byte(rtlpriv, REG_LEDCFG1, ledcfg & 0x10);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", pled->ledpin);
+ pr_err("switch case %#x not processed\n", pled->ledpin);
break;
}
pled->ledon = true;
@@ -100,8 +99,7 @@ void rtl8723e_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled)
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", pled->ledpin);
+ pr_err("switch case %#x not processed\n", pled->ledpin);
break;
}
pled->ledon = false;
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c
index 8001dce..393ac40 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c
@@ -213,7 +213,7 @@ static bool _rtl8723e_phy_bb8192c_config_parafile(struct ieee80211_hw *hw)
rtstatus = _rtl8723e_phy_config_bb_with_headerfile(hw,
BASEBAND_CONFIG_PHY_REG);
if (rtstatus != true) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Write BB Reg Fail!!\n");
+ pr_err("Write BB Reg Fail!!\n");
return false;
}
@@ -227,13 +227,13 @@ static bool _rtl8723e_phy_bb8192c_config_parafile(struct ieee80211_hw *hw)
BASEBAND_CONFIG_PHY_REG);
}
if (rtstatus != true) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "BB_PG Reg Fail!!\n");
+ pr_err("BB_PG Reg Fail!!\n");
return false;
}
rtstatus =
_rtl8723e_phy_config_bb_with_headerfile(hw, BASEBAND_CONFIG_AGC_TAB);
if (rtstatus != true) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "AGC Table Fail\n");
+ pr_err("AGC Table Fail\n");
return false;
}
rtlphy->cck_high_power = (bool) (rtl_get_bbreg(hw,
@@ -749,8 +749,7 @@ void rtl8723e_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation)
(u8 *)&iotype);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Unknown Scan Backup operation.\n");
+ pr_err("Unknown Scan Backup operation.\n");
break;
}
}
@@ -791,8 +790,7 @@ void rtl8723e_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_prsr_rsc);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
break;
}
@@ -816,8 +814,7 @@ void rtl8723e_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
HAL_PRIME_CHNL_OFFSET_LOWER) ? 2 : 1);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
break;
}
rtl8723e_phy_rf6052_set_bandwidth(hw, rtlphy->current_chan_bw);
@@ -977,8 +974,7 @@ static bool _rtl8723e_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw,
currentcmd = &postcommoncmd[*step];
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Invalid 'stage' = %d, Check it!\n", *stage);
+ pr_err("Invalid 'stage' = %d, Check it!\n", *stage);
return true;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/rf.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/rf.c
index 4227717..89958b6 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/rf.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/rf.c
@@ -51,8 +51,7 @@ void rtl8723e_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
rtlphy->rfreg_chnlval[0]);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", bandwidth);
+ pr_err("unknown bandwidth: %#X\n", bandwidth);
break;
}
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c
index c51a9e8..401f542 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c
@@ -172,8 +172,7 @@ int rtl8723e_init_sw_vars(struct ieee80211_hw *hw)
/* for firmware buf */
rtlpriv->rtlhal.pfirmware = vzalloc(0x6000);
if (!rtlpriv->rtlhal.pfirmware) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Can't alloc buffer for fw.\n");
+ pr_err("Can't alloc buffer for fw.\n");
return 1;
}
@@ -186,8 +185,7 @@ int rtl8723e_init_sw_vars(struct ieee80211_hw *hw)
rtlpriv->io.dev, GFP_KERNEL, hw,
rtl_fw_cb);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to request firmware!\n");
+ pr_err("Failed to request firmware!\n");
return 1;
}
return 0;
@@ -270,7 +268,7 @@ static struct rtl_mod_params rtl8723e_mod_params = {
.inactiveps = true,
.swctrl_lps = false,
.fwctrl_lps = true,
- .debug = DBG_EMERG,
+ .debug = 0,
.msi_support = false,
.disable_watchdog = false,
};
--
2.10.2
^ permalink raw reply related
* [PATCH 04/14] rtlwifi: rtl8723be: Remove all instances of DBG_EMERG
From: Larry Finger @ 2016-12-11 5:45 UTC (permalink / raw)
To: kvalo; +Cc: devel, linux-wireless, Larry Finger, Ping-Ke Shih
In-Reply-To: <20161211054523.7119-1-Larry.Finger@lwfinger.net>
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
---
drivers/net/wireless/realtek/rtlwifi/rtl8723be/fw.c | 9 +++------
drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c | 16 ++++++----------
drivers/net/wireless/realtek/rtlwifi/rtl8723be/led.c | 6 ++----
drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c | 18 +++++++-----------
drivers/net/wireless/realtek/rtlwifi/rtl8723be/rf.c | 3 +--
drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c | 8 +++-----
6 files changed, 22 insertions(+), 38 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/fw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/fw.c
index f9a2c8b..89bba11 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/fw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/fw.c
@@ -97,8 +97,7 @@ static void _rtl8723be_fill_h2c_command(struct ieee80211_hw *hw, u8 element_id,
while (!bwrite_sucess) {
wait_writeh2c_limmit--;
if (wait_writeh2c_limmit == 0) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Write H2C fail because no trigger for FW INT!\n");
+ pr_err("rtl8723be:Write H2C fail because no trigger for FW INT!\n");
break;
}
@@ -121,8 +120,8 @@ static void _rtl8723be_fill_h2c_command(struct ieee80211_hw *hw, u8 element_id,
box_extreg = REG_HMEBOX_EXT_3;
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", boxnum);
+ pr_err("rtl8723be:switch case %#x not processed\n",
+ boxnum);
break;
}
@@ -194,8 +192,8 @@ static void _rtl8723be_fill_h2c_command(struct ieee80211_hw *hw, u8 element_id,
}
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", cmd_len);
+ pr_err("rtl8723be:switch case %#x not processed\n",
+ cmd_len);
break;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c
index 0ae5562..2fb39f6 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c
@@ -747,9 +747,8 @@ static bool _rtl8723be_llt_write(struct ieee80211_hw *hw, u32 address, u32 data)
break;
if (count > POLLING_LLT_THRESHOLD) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to polling write LLT done at address %d!\n",
- address);
+ pr_err("rtl8723be:Failed to polling write LLT done at address %d!\n",
+ address);
status = false;
break;
}
@@ -1383,7 +1382,7 @@ int rtl8723be_hw_init(struct ieee80211_hw *hw)
}
rtstatus = _rtl8723be_init_mac(hw);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Init MAC failed\n");
+ pr_err("rtl8723be:Init MAC failed\n");
err = 1;
goto exit;
}
@@ -1532,8 +1531,7 @@ static int _rtl8723be_set_media_status(struct ieee80211_hw *hw,
"Set Network type to AP!\n");
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Network type %d not support!\n", type);
+ pr_err("rtl8723be:Network type %d not support!\n", type);
return 1;
}
@@ -2247,7 +2245,7 @@ void rtl8723be_read_eeprom_info(struct ieee80211_hw *hw)
rtlefuse->autoload_failflag = false;
_rtl8723be_read_adapter_info(hw, false);
} else {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Autoload ERR!!\n");
+ pr_err("rtl8723be:Autoload ERR!!\n");
}
_rtl8723be_hal_customized_behavior(hw);
}
@@ -2584,9 +2582,7 @@ void rtl8723be_set_key(struct ieee80211_hw *hw, u32 key_index,
entry_id = rtl_cam_get_free_entry(hw,
p_macaddr);
if (entry_id >= TOTAL_CAM_ENTRY) {
- RT_TRACE(rtlpriv, COMP_SEC,
- DBG_EMERG,
- "Can not find free hw security cam entry\n");
+ pr_err("rtl8723be:Can not find free hw security cam entry\n");
return;
}
} else {
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/led.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/led.c
index 497913e..193125b 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/led.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/led.c
@@ -57,8 +57,7 @@ void rtl8723be_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled)
rtl_write_byte(rtlpriv, REG_LEDCFG1, ledcfg & 0x10);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", pled->ledpin);
+ pr_err("rtl8723be:switch case %#x not processed\n",
+ pled->ledpin);
break;
}
pled->ledon = true;
@@ -99,8 +98,7 @@ void rtl8723be_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled)
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", pled->ledpin);
+ pr_err("rtl8723be:switch case %#x not processed\n",
+ pled->ledpin);
break;
}
pled->ledon = false;
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c
index 0ee11cb..36acd1e 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c
@@ -467,7 +467,7 @@ static bool _rtl8723be_phy_bb8723b_config_parafile(struct ieee80211_hw *hw)
rtstatus = _rtl8723be_phy_config_bb_with_headerfile(hw,
BASEBAND_CONFIG_PHY_REG);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Write BB Reg Fail!!\n");
+ pr_err("rtl8723be:Write BB Reg Fail!!\n");
return false;
}
_rtl8723be_phy_init_tx_power_by_rate(hw);
@@ -478,13 +478,13 @@ static bool _rtl8723be_phy_bb8723b_config_parafile(struct ieee80211_hw *hw)
}
phy_txpower_by_rate_config(hw);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "BB_PG Reg Fail!!\n");
+ pr_err("rtl8723be:BB_PG Reg Fail!!\n");
return false;
}
rtstatus = _rtl8723be_phy_config_bb_with_headerfile(hw,
BASEBAND_CONFIG_AGC_TAB);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "AGC Table Fail\n");
+ pr_err("rtl8723be:AGC Table Fail\n");
return false;
}
rtlphy->cck_high_power = (bool)(rtl_get_bbreg(hw,
@@ -1249,8 +1249,7 @@ void rtl8723be_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation)
(u8 *)&iotype);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Unknown Scan Backup operation.\n");
+ pr_err("rtl8723be:Unknown Scan Backup operation.\n");
break;
}
}
@@ -1291,8 +1290,8 @@ void rtl8723be_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_prsr_rsc);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("rtl8723be:unknown bandwidth: %#X\n",
+ rtlphy->current_chan_bw);
break;
}
@@ -1316,8 +1314,8 @@ void rtl8723be_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
HAL_PRIME_CHNL_OFFSET_LOWER) ? 2 : 1);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("rtl8723be:unknown bandwidth: %#X\n",
+ rtlphy->current_chan_bw);
break;
}
rtl8723be_phy_rf6052_set_bandwidth(hw, rtlphy->current_chan_bw);
@@ -1462,8 +1459,8 @@ static bool _rtl8723be_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw,
currentcmd = &postcommoncmd[*step];
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Invalid 'stage' = %d, Check it!\n", *stage);
+ pr_err("rtl8723be:Invalid 'stage' = %d, Check it!\n",
+ *stage);
return true;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/rf.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/rf.c
index 78f4f18..4849145 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/rf.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/rf.c
@@ -51,8 +51,7 @@ void rtl8723be_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
rtlphy->rfreg_chnlval[0]);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", bandwidth);
+ pr_err("rtl8723be:unknown bandwidth: %#X\n", bandwidth);
break;
}
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c
index 847644d..dd42c1a 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c
@@ -179,8 +179,7 @@ int rtl8723be_init_sw_vars(struct ieee80211_hw *hw)
/* for firmware buf */
rtlpriv->rtlhal.pfirmware = vzalloc(0x8000);
if (!rtlpriv->rtlhal.pfirmware) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Can't alloc buffer for fw.\n");
+ pr_err("rtl8723be:Can't alloc buffer for fw.\n");
return 1;
}
@@ -190,8 +189,7 @@ int rtl8723be_init_sw_vars(struct ieee80211_hw *hw)
rtlpriv->io.dev, GFP_KERNEL, hw,
rtl_fw_cb);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to request firmware!\n");
+ pr_err("rtl8723be:Failed to request firmware!\n");
return 1;
}
return 0;
@@ -273,7 +271,7 @@ static struct rtl_mod_params rtl8723be_mod_params = {
.fwctrl_lps = true,
.msi_support = false,
.disable_watchdog = false,
- .debug = DBG_EMERG,
+ .debug = 0,
.ant_sel = 0,
};
--
2.10.2
^ permalink raw reply related
* [PATCH 03/14] rtlwifi: rtl8821ae: Remove all instances of DBG_EMERG
From: Larry Finger @ 2016-12-11 5:45 UTC (permalink / raw)
To: kvalo; +Cc: devel, linux-wireless, Larry Finger, Ping-Ke Shih
In-Reply-To: <20161211054523.7119-1-Larry.Finger@lwfinger.net>
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
---
.../net/wireless/realtek/rtlwifi/rtl8821ae/dm.c | 3 +-
.../net/wireless/realtek/rtlwifi/rtl8821ae/fw.c | 11 ++----
.../net/wireless/realtek/rtlwifi/rtl8821ae/hw.c | 15 +++-----
.../net/wireless/realtek/rtlwifi/rtl8821ae/phy.c | 43 ++++++++--------------
.../net/wireless/realtek/rtlwifi/rtl8821ae/rf.c | 5 +--
.../net/wireless/realtek/rtlwifi/rtl8821ae/sw.c | 14 +++----
6 files changed, 33 insertions(+), 58 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c
index bdfd444..32900c5 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c
@@ -604,8 +604,7 @@ static void rtl8821ae_dm_find_minimum_rssi(struct ieee80211_hw *hw)
if ((mac->link_state < MAC80211_LINKED) &&
(rtlpriv->dm.entry_min_undec_sm_pwdb == 0)) {
rtl_dm_dig->min_undec_pwdb_for_dm = 0;
- RT_TRACE(rtlpriv, COMP_BB_POWERSAVING, DBG_LOUD,
- "Not connected to any\n");
+ pr_debug("rtl8821ae: Not connected to any AP\n");
}
if (mac->link_state >= MAC80211_LINKED) {
if (mac->opmode == NL80211_IFTYPE_AP ||
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/fw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/fw.c
index c70face..602ac86 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/fw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/fw.c
@@ -125,8 +125,7 @@ static void _rtl8821ae_write_fw(struct ieee80211_hw *hw,
remainsize = size % FW_8821AE_PAGE_SIZE;
if (pagenums > 8) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Page numbers should not greater then 8\n");
+ pr_err("rtl8821ae: Page numbers should not greater then 8\n");
}
for (page = 0; page < pagenums; page++) {
@@ -162,8 +161,8 @@ static int _rtl8821ae_fw_free_to_go(struct ieee80211_hw *hw)
goto exit;
}
- RT_TRACE(rtlpriv, COMP_FW, DBG_EMERG,
- "Checksum report OK ! REG_MCUFWDL:0x%08x .\n", value32);
+ pr_err("rtl8821ae: Checksum report OK! REG_MCUFWDL:0x%08x\n",
+ value32);
value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
value32 |= MCUFWDL_RDY;
@@ -186,9 +184,8 @@ static int _rtl8821ae_fw_free_to_go(struct ieee80211_hw *hw)
udelay(FW_8821AE_POLLING_DELAY);
} while (counter++ < FW_8821AE_POLLING_TIMEOUT_COUNT);
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Polling FW ready fail!! REG_MCUFWDL:0x%08x .\n",
- value32);
+ pr_err("rtl8821ae: Polling FW ready fail!! REG_MCUFWDL:0x%08x .\n",
+ value32);
exit:
return err;
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
index b6dc2f3..3932a5d 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
@@ -822,9 +822,8 @@ static bool _rtl8821ae_llt_write(struct ieee80211_hw *hw, u32 address, u32 data)
break;
if (count > POLLING_LLT_THRESHOLD) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to polling write LLT done at address %d!\n",
- address);
+ pr_err("rtl8821ae: Failed to polling write LLT done at address %d!\n",
+ address);
status = false;
break;
}
@@ -1927,7 +1926,7 @@ int rtl8821ae_hw_init(struct ieee80211_hw *hw)
rtstatus = _rtl8821ae_init_mac(hw);
if (rtstatus != true) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Init MAC failed\n");
+ pr_err("rtl8821ae: Init MAC failed\n");
err = 1;
return err;
}
@@ -2174,8 +2173,7 @@ static int _rtl8821ae_set_media_status(struct ieee80211_hw *hw,
"Set Network type to AP!\n");
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Network type %d not support!\n", type);
+ pr_err("rtl8821ae: Network type %d not support!\n", type);
return 1;
}
@@ -3274,7 +3272,7 @@ void rtl8821ae_read_eeprom_info(struct ieee80211_hw *hw)
rtlefuse->autoload_failflag = false;
_rtl8821ae_read_adapter_info(hw, false);
} else {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Autoload ERR!!\n");
+ pr_err("rtl8821ae: Autoload ERR!!\n");
}
/*hal_ReadRFType_8812A()*/
/* _rtl8821ae_hal_customized_behavior(hw); */
@@ -3949,8 +3947,7 @@ void rtl8821ae_set_key(struct ieee80211_hw *hw, u32 key_index,
if (mac->opmode == NL80211_IFTYPE_AP) {
entry_id = rtl_cam_get_free_entry(hw, p_macaddr);
if (entry_id >= TOTAL_CAM_ENTRY) {
- RT_TRACE(rtlpriv, COMP_SEC, DBG_EMERG,
- "Can not find free hwsecurity cam entry\n");
+ pr_err("an not find free hwsecurity cam entry\n");
return;
}
} else {
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c
index bd1a546..42c2802 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c
@@ -215,7 +215,6 @@ void rtl8821ae_phy_set_rf_reg(struct ieee80211_hw *hw,
static u32 _rtl8821ae_phy_rf_serial_read(struct ieee80211_hw *hw,
enum radio_path rfpath, u32 offset)
{
- struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
bool is_pi_mode = false;
u32 retvalue = 0;
@@ -223,7 +222,7 @@ static u32 _rtl8821ae_phy_rf_serial_read(struct ieee80211_hw *hw,
/* 2009/06/17 MH We can not execute IO for power
save or other accident mode.*/
if (RT_CANNOT_IO(hw)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "return all one\n");
+ pr_err("rtl8821ae: return all one\n");
return 0xFFFFFFFF;
}
/* <20120809, Kordan> CCA OFF(when entering),
@@ -284,7 +283,7 @@ static void _rtl8821ae_phy_rf_serial_write(struct ieee80211_hw *hw,
u32 newoffset;
if (RT_CANNOT_IO(hw)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "stop\n");
+ pr_err("rtl8821ae: stop\n");
return;
}
offset &= 0xff;
@@ -1665,7 +1664,7 @@ static bool _rtl8821ae_phy_bb8821a_config_parafile(struct ieee80211_hw *hw)
rtstatus = _rtl8821ae_phy_config_bb_with_headerfile(hw,
BASEBAND_CONFIG_PHY_REG);
if (rtstatus != true) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Write BB Reg Fail!!\n");
+ pr_err("rtl8821ae: Write BB Reg Fail!!\n");
return false;
}
_rtl8821ae_phy_init_tx_power_by_rate(hw);
@@ -1674,7 +1673,7 @@ static bool _rtl8821ae_phy_bb8821a_config_parafile(struct ieee80211_hw *hw)
BASEBAND_CONFIG_PHY_REG);
}
if (rtstatus != true) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "BB_PG Reg Fail!!\n");
+ pr_err("rtl8821ae: BB_PG Reg Fail!!\n");
return false;
}
@@ -1688,7 +1687,7 @@ static bool _rtl8821ae_phy_bb8821a_config_parafile(struct ieee80211_hw *hw)
BASEBAND_CONFIG_AGC_TAB);
if (rtstatus != true) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "AGC Table Fail\n");
+ pr_err("rtl8821ae: AGC Table Fail\n");
return false;
}
rtlphy->cck_high_power = (bool)(rtl_get_bbreg(hw,
@@ -2064,8 +2063,7 @@ bool rtl8812ae_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
break;
case RF90_PATH_C:
case RF90_PATH_D:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", rfpath);
+ pr_err("rtl8821ae: switch case %#x not processed\n", rfpath);
break;
}
return true;
@@ -2132,8 +2130,7 @@ bool rtl8821ae_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
case RF90_PATH_B:
case RF90_PATH_C:
case RF90_PATH_D:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", rfpath);
+ pr_err("rtl8821ae: switch case %#x not processed\n", rfpath);
break;
}
return true;
@@ -3336,8 +3333,7 @@ void rtl8821ae_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation)
(u8 *)&iotype);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Unknown Scan Backup operation.\n");
+ pr_err("rtl8821ae: Unknown Scan Backup operation.\n");
break;
}
}
@@ -3378,8 +3374,7 @@ static u8 _rtl8821ae_phy_get_secondary_chnl(struct rtl_priv *rtlpriv)
else if (mac->cur_80_prime_sc == PRIME_CHNL_OFFSET_UPPER)
sc_set_40 = VHT_DATA_SC_40_UPPER_OF_80MHZ;
else
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "SCMapping: Not Correct Primary40MHz Setting\n");
+ pr_err("rtl8821ae: SCMapping: Not Correct Primary40MHz Setting\n");
if ((mac->cur_40_prime_sc == PRIME_CHNL_OFFSET_LOWER) &&
(mac->cur_80_prime_sc == HAL_PRIME_CHNL_OFFSET_LOWER))
@@ -3394,16 +3389,14 @@ static u8 _rtl8821ae_phy_get_secondary_chnl(struct rtl_priv *rtlpriv)
(mac->cur_80_prime_sc == HAL_PRIME_CHNL_OFFSET_UPPER))
sc_set_20 = VHT_DATA_SC_20_UPPERST_OF_80MHZ;
else
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "SCMapping: Not Correct Primary40MHz Setting\n");
+ pr_err("rtl8821ae: SCMapping: Not Correct Primary40MHz Setting\n");
} else if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
if (mac->cur_40_prime_sc == PRIME_CHNL_OFFSET_UPPER)
sc_set_20 = VHT_DATA_SC_20_UPPER_OF_80MHZ;
else if (mac->cur_40_prime_sc == PRIME_CHNL_OFFSET_LOWER)
sc_set_20 = VHT_DATA_SC_20_LOWER_OF_80MHZ;
else
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "SCMapping: Not Correct Primary40MHz Setting\n");
+ pr_err("rtl8821ae: SCMapping: Not Correct Primary40MHz Setting\n");
}
return (sc_set_40 << 4) | sc_set_20;
}
@@ -3479,8 +3472,7 @@ void rtl8821ae_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("rtl8821ae: unknown bandwidth: %#X\n",
+ rtlphy->current_chan_bw);
break;
}
@@ -4660,8 +4652,8 @@ bool rtl8821ae_phy_set_io_cmd(struct ieee80211_hw *hw, enum io_type iotype)
postprocessing = true;
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", iotype);
+ pr_err("rtl8821ae: switch case %#x not processed\n",
+ iotype);
break;
}
} while (false);
@@ -4704,9 +4695,8 @@ static void rtl8821ae_phy_set_io(struct ieee80211_hw *hw)
case IO_CMD_PAUSE_BAND1_DM_BY_SCAN:
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n",
- rtlphy->current_io_type);
+ pr_err("rtl8821ae: switch case %#x not processed\n",
+ rtlphy->current_io_type);
break;
}
rtlphy->set_io_inprogress = false;
@@ -4811,8 +4801,8 @@ static bool _rtl8821ae_phy_set_rf_power_state(struct ieee80211_hw *hw,
}
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", rfpwr_state);
+ pr_err("rtl8821ae: switch case %#x not processed\n",
+ rfpwr_state);
bresult = false;
break;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/rf.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/rf.c
index c6ab957..95489f4 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/rf.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/rf.c
@@ -34,8 +34,6 @@ static bool _rtl8821ae_phy_rf6052_config_parafile(struct ieee80211_hw *hw);
void rtl8821ae_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
{
- struct rtl_priv *rtlpriv = rtl_priv(hw);
-
switch (bandwidth) {
case HT_CHANNEL_WIDTH_20:
rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, BIT(11)|BIT(10), 3);
@@ -50,8 +48,7 @@ void rtl8821ae_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
rtl_set_rfreg(hw, RF90_PATH_B, RF_CHNLBW, BIT(11)|BIT(10), 0);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", bandwidth);
+ pr_err("rtl8821ae: unknown bandwidth: %#X\n", bandwidth);
break;
}
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c
index 297938e..8ec7ab2 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c
@@ -192,14 +192,12 @@ int rtl8821ae_init_sw_vars(struct ieee80211_hw *hw)
/* for firmware buf */
rtlpriv->rtlhal.pfirmware = vzalloc(0x8000);
if (!rtlpriv->rtlhal.pfirmware) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Can't alloc buffer for fw.\n");
+ pr_err("rtl8821ae: Can't alloc buffer for fw.\n");
return 1;
}
rtlpriv->rtlhal.wowlan_firmware = vzalloc(0x8000);
if (!rtlpriv->rtlhal.wowlan_firmware) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Can't alloc buffer for wowlan fw.\n");
+ pr_err("rtl8821ae: Can't alloc buffer for wowlan fw.\n");
return 1;
}
@@ -218,8 +216,7 @@ int rtl8821ae_init_sw_vars(struct ieee80211_hw *hw)
rtlpriv->io.dev, GFP_KERNEL, hw,
rtl_fw_cb);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to request normal firmware!\n");
+ pr_err("rtl8821ae: Failed to request normal firmware!\n");
return 1;
}
/*load wowlan firmware*/
@@ -229,8 +226,7 @@ int rtl8821ae_init_sw_vars(struct ieee80211_hw *hw)
rtlpriv->io.dev, GFP_KERNEL, hw,
rtl_wowlan_fw_cb);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to request wowlan firmware!\n");
+ pr_err("rtl8821ae: Failed to request wowlan firmware!\n");
return 1;
}
return 0;
@@ -313,7 +309,7 @@ static struct rtl_mod_params rtl8821ae_mod_params = {
.fwctrl_lps = true,
.msi_support = true,
.int_clear = true,
- .debug = DBG_EMERG,
+ .debug = 0,
.disable_watchdog = 0,
};
--
2.10.2
^ permalink raw reply related
* [PATCH 04/14] rtlwifi_new: rtl8723be: Remove all instances of DBG_EMERG
From: Larry Finger @ 2016-12-11 5:45 UTC (permalink / raw)
To: kvalo; +Cc: devel, linux-wireless, Larry Finger, Ping-Ke Shih
In-Reply-To: <20161211054523.7119-1-Larry.Finger@lwfinger.net>
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
---
drivers/net/wireless/realtek/rtlwifi/rtl8723be/fw.c | 9 +++------
drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c | 16 ++++++----------
drivers/net/wireless/realtek/rtlwifi/rtl8723be/led.c | 6 ++----
drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c | 18 +++++++-----------
drivers/net/wireless/realtek/rtlwifi/rtl8723be/rf.c | 3 +--
drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c | 8 +++-----
6 files changed, 22 insertions(+), 38 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/fw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/fw.c
index 6b03c7f..71d1e89 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/fw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/fw.c
@@ -97,8 +97,7 @@ static void _rtl8723be_fill_h2c_command(struct ieee80211_hw *hw, u8 element_id,
while (!bwrite_sucess) {
wait_writeh2c_limmit--;
if (wait_writeh2c_limmit == 0) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Write H2C fail because no trigger for FW INT!\n");
+ pr_err("Write H2C fail because no trigger for FW INT!\n");
break;
}
@@ -121,8 +120,7 @@ static void _rtl8723be_fill_h2c_command(struct ieee80211_hw *hw, u8 element_id,
box_extreg = REG_HMEBOX_EXT_3;
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", boxnum);
+ pr_err("switch case %#x not processed\n", boxnum);
break;
}
@@ -194,8 +192,7 @@ static void _rtl8723be_fill_h2c_command(struct ieee80211_hw *hw, u8 element_id,
}
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", cmd_len);
+ pr_err("switch case %#x not processed\n", cmd_len);
break;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c
index 56a1ae4..ae2a38e 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c
@@ -747,9 +747,8 @@ static bool _rtl8723be_llt_write(struct ieee80211_hw *hw, u32 address, u32 data)
break;
if (count > POLLING_LLT_THRESHOLD) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to polling write LLT done at address %d!\n",
- address);
+ pr_err("Failed to polling write LLT done at address %d!\n",
+ address);
status = false;
break;
}
@@ -1383,7 +1382,7 @@ int rtl8723be_hw_init(struct ieee80211_hw *hw)
}
rtstatus = _rtl8723be_init_mac(hw);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Init MAC failed\n");
+ pr_err("Init MAC failed\n");
err = 1;
goto exit;
}
@@ -1532,8 +1531,7 @@ static int _rtl8723be_set_media_status(struct ieee80211_hw *hw,
"Set Network type to AP!\n");
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Network type %d not support!\n", type);
+ pr_err("Network type %d not support!\n", type);
return 1;
}
@@ -2247,7 +2245,7 @@ void rtl8723be_read_eeprom_info(struct ieee80211_hw *hw)
rtlefuse->autoload_failflag = false;
_rtl8723be_read_adapter_info(hw, false);
} else {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Autoload ERR!!\n");
+ pr_err("Autoload ERR!!\n");
}
_rtl8723be_hal_customized_behavior(hw);
}
@@ -2584,9 +2582,7 @@ void rtl8723be_set_key(struct ieee80211_hw *hw, u32 key_index,
entry_id = rtl_cam_get_free_entry(hw,
p_macaddr);
if (entry_id >= TOTAL_CAM_ENTRY) {
- RT_TRACE(rtlpriv, COMP_SEC,
- DBG_EMERG,
- "Can not find free hw security cam entry\n");
+ pr_err("Can not find free hw security cam entry\n");
return;
}
} else {
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/led.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/led.c
index 497913e..193125b 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/led.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/led.c
@@ -57,8 +57,7 @@ void rtl8723be_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled)
rtl_write_byte(rtlpriv, REG_LEDCFG1, ledcfg & 0x10);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", pled->ledpin);
+ pr_err("switch case %#x not processed\n", pled->ledpin);
break;
}
pled->ledon = true;
@@ -99,8 +98,7 @@ void rtl8723be_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled)
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", pled->ledpin);
+ pr_err("switch case %#x not processed\n", pled->ledpin);
break;
}
pled->ledon = false;
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c
index b4e0a58..8c2b497 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c
@@ -467,7 +467,7 @@ static bool _rtl8723be_phy_bb8723b_config_parafile(struct ieee80211_hw *hw)
rtstatus = _rtl8723be_phy_config_bb_with_headerfile(hw,
BASEBAND_CONFIG_PHY_REG);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Write BB Reg Fail!!\n");
+ pr_err("Write BB Reg Fail!!\n");
return false;
}
_rtl8723be_phy_init_tx_power_by_rate(hw);
@@ -478,13 +478,13 @@ static bool _rtl8723be_phy_bb8723b_config_parafile(struct ieee80211_hw *hw)
}
phy_txpower_by_rate_config(hw);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "BB_PG Reg Fail!!\n");
+ pr_err("BB_PG Reg Fail!!\n");
return false;
}
rtstatus = _rtl8723be_phy_config_bb_with_headerfile(hw,
BASEBAND_CONFIG_AGC_TAB);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "AGC Table Fail\n");
+ pr_err("AGC Table Fail\n");
return false;
}
rtlphy->cck_high_power = (bool)(rtl_get_bbreg(hw,
@@ -1249,8 +1249,7 @@ void rtl8723be_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation)
(u8 *)&iotype);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Unknown Scan Backup operation.\n");
+ pr_err("Unknown Scan Backup operation.\n");
break;
}
}
@@ -1291,8 +1290,7 @@ void rtl8723be_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_prsr_rsc);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
break;
}
@@ -1316,8 +1314,7 @@ void rtl8723be_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
HAL_PRIME_CHNL_OFFSET_LOWER) ? 2 : 1);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
break;
}
rtl8723be_phy_rf6052_set_bandwidth(hw, rtlphy->current_chan_bw);
@@ -1462,8 +1459,7 @@ static bool _rtl8723be_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw,
currentcmd = &postcommoncmd[*step];
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Invalid 'stage' = %d, Check it!\n", *stage);
+ pr_err("Invalid 'stage' = %d, Check it!\n", *stage);
return true;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/rf.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/rf.c
index 78f4f18..4849145 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/rf.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/rf.c
@@ -51,8 +51,7 @@ void rtl8723be_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
rtlphy->rfreg_chnlval[0]);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", bandwidth);
+ pr_err("unknown bandwidth: %#X\n", bandwidth);
break;
}
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c
index 847644d..dd42c1a 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c
@@ -179,8 +179,7 @@ int rtl8723be_init_sw_vars(struct ieee80211_hw *hw)
/* for firmware buf */
rtlpriv->rtlhal.pfirmware = vzalloc(0x8000);
if (!rtlpriv->rtlhal.pfirmware) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Can't alloc buffer for fw.\n");
+ pr_err("Can't alloc buffer for fw.\n");
return 1;
}
@@ -190,8 +189,7 @@ int rtl8723be_init_sw_vars(struct ieee80211_hw *hw)
rtlpriv->io.dev, GFP_KERNEL, hw,
rtl_fw_cb);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to request firmware!\n");
+ pr_err("Failed to request firmware!\n");
return 1;
}
return 0;
@@ -273,7 +271,7 @@ static struct rtl_mod_params rtl8723be_mod_params = {
.fwctrl_lps = true,
.msi_support = false,
.disable_watchdog = false,
- .debug = DBG_EMERG,
+ .debug = 0,
.ant_sel = 0,
};
--
2.10.2
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox