Linux IEEE 802.15.4 and 6LoWPAN development
 help / color / mirror / Atom feed
From: Alexander Aring <alex.aring@gmail.com>
To: linux-wpan@vger.kernel.org
Cc: kernel@pengutronix.de, Alexander Aring <alex.aring@gmail.com>
Subject: [PATCHv2 wpan-next 11/16] at86rf230: set cca_modes supported flags
Date: Wed,  6 May 2015 13:40:23 +0200	[thread overview]
Message-ID: <1430912428-17284-12-git-send-email-alex.aring@gmail.com> (raw)
In-Reply-To: <1430912428-17284-1-git-send-email-alex.aring@gmail.com>

This patch sets the at86rf230 supported cca modes. In case of at86rf212
it also can support listen before transmit.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
---
 drivers/net/ieee802154/at86rf230.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index 151d57f..e2be571 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -1569,6 +1569,11 @@ at86rf230_detect_device(struct at86rf230_local *lp)
 			IEEE802154_HW_TXPOWER | IEEE802154_HW_ARET |
 			IEEE802154_HW_AFILT | IEEE802154_HW_PROMISCUOUS;
 
+	lp->hw->phy->supported.cca_modes = BIT(NL802154_CCA_ENERGY) |
+		BIT(NL802154_CCA_CARRIER) | BIT(NL802154_CCA_ENERGY_CARRIER);
+	lp->hw->phy->supported.cca_opts = BIT(NL802154_CCA_OPT_ENERGY_CARRIER_AND) |
+		BIT(NL802154_CCA_OPT_ENERGY_CARRIER_OR);
+
 	lp->hw->phy->cca.mode = NL802154_CCA_ENERGY;
 
 	switch (part) {
@@ -1591,6 +1596,7 @@ at86rf230_detect_device(struct at86rf230_local *lp)
 		lp->hw->phy->supported.channels[2] = 0x00007FF;
 		lp->hw->phy->current_channel = 5;
 		lp->hw->phy->symbol_duration = 25;
+		lp->hw->phy->supported.lbt = NL802154_SUPPORTED_BOOL_BOTH;
 		break;
 	case 11:
 		chip = "at86rf233";
-- 
2.3.7


  parent reply	other threads:[~2015-05-06 11:41 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-06 11:40 [PATCHv2 wpan-next 00/16] ieee802154: add support for phy capabilities Alexander Aring
2015-05-06 11:40 ` [PATCHv2 wpan-next 01/16] ieee802154: change transmit power to s32 Alexander Aring
2015-05-06 11:40 ` [PATCHv2 wpan-next 02/16] ieee802154: change transmit power to mbm Alexander Aring
2015-05-06 11:40 ` [PATCHv2 wpan-next 03/16] ieee802154: change cca ed level " Alexander Aring
2015-05-06 11:40 ` [PATCHv2 wpan-next 04/16] ieee802154: introduce wpan_phy_supported Alexander Aring
2015-05-06 11:40 ` [PATCHv2 wpan-next 05/16] ieee802154: add several phy supported handling Alexander Aring
2015-05-06 11:40 ` [PATCHv2 wpan-next 06/16] mac802154: check for really changes Alexander Aring
2015-05-06 11:40 ` [PATCHv2 wpan-next 07/16] mac802154: remove check if operation is supported Alexander Aring
2015-05-06 11:40 ` [PATCHv2 wpan-next 08/16] ieee802154: add iftypes capability Alexander Aring
2015-05-06 11:40 ` [PATCHv2 wpan-next 09/16] ieee802154: add support for get tx powers Alexander Aring
2015-05-06 12:02   ` Phoebe Buckheister
2015-05-06 13:19     ` Alexander Aring
2015-05-06 11:40 ` [PATCHv2 wpan-next 10/16] ieee802154: add support for get cca ed levels Alexander Aring
2015-05-06 11:40 ` Alexander Aring [this message]
2015-05-06 11:40 ` [PATCHv2 wpan-next 12/16] at86rf230: add reset states of tx power level Alexander Aring
2015-05-06 11:40 ` [PATCHv2 wpan-next 13/16] at86rf230: rework tx power support Alexander Aring
2015-05-06 11:40 ` [PATCHv2 wpan-next 14/16] at86rf230: rework tx cca energy detection level Alexander Aring
2015-05-06 11:40 ` [PATCHv2 wpan-next 15/16] ieee802154: check transmit power before driver layer Alexander Aring
2015-05-06 11:40 ` [PATCHv2 wpan-next 16/16] nl802154: add support for dump phy capabilities Alexander Aring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1430912428-17284-12-git-send-email-alex.aring@gmail.com \
    --to=alex.aring@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-wpan@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox