Linux IEEE 802.15.4 and 6LoWPAN development
 help / color / mirror / Atom feed
From: Alexander Aring <alex.aring@gmail.com>
To: linux-wpan@vger.kernel.org
Cc: kernel@pengutronix.de, Alexander Aring <alex.aring@gmail.com>
Subject: [PATCHv2 wpan-next 07/16] mac802154: remove check if operation is supported
Date: Wed,  6 May 2015 13:40:19 +0200	[thread overview]
Message-ID: <1430912428-17284-8-git-send-email-alex.aring@gmail.com> (raw)
In-Reply-To: <1430912428-17284-1-git-send-email-alex.aring@gmail.com>

This patch removes the check if operation is supported by driver layer.
This is done now by capabilities flags, if these are valid then the
driver should support the operation, otherwise a WARN_ON occurs.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
---
 net/mac802154/cfg.c | 24 ------------------------
 1 file changed, 24 deletions(-)

diff --git a/net/mac802154/cfg.c b/net/mac802154/cfg.c
index 45c4dc3..d5290ea 100644
--- a/net/mac802154/cfg.c
+++ b/net/mac802154/cfg.c
@@ -98,10 +98,6 @@ ieee802154_set_cca_mode(struct wpan_phy *wpan_phy,
 	if (wpan_phy_cca_cmp(&wpan_phy->cca, cca))
 		return 0;
 
-	/* check if phy support this setting */
-	if (!(local->hw.flags & IEEE802154_HW_CCA_MODE))
-		return -EOPNOTSUPP;
-
 	ret = drv_set_cca_mode(local, cca);
 	if (!ret)
 		wpan_phy->cca = *cca;
@@ -127,17 +123,12 @@ ieee802154_set_backoff_exponent(struct wpan_phy *wpan_phy,
 				struct wpan_dev *wpan_dev,
 				u8 min_be, u8 max_be)
 {
-	struct ieee802154_local *local = wpan_phy_priv(wpan_phy);
-
 	ASSERT_RTNL();
 
 	if (wpan_dev->min_be == min_be &&
 	    wpan_dev->max_be == max_be)
 		return 0;
 
-	if (!(local->hw.flags & IEEE802154_HW_CSMA_PARAMS))
-		return -EOPNOTSUPP;
-
 	wpan_dev->min_be = min_be;
 	wpan_dev->max_be = max_be;
 	return 0;
@@ -161,16 +152,11 @@ ieee802154_set_max_csma_backoffs(struct wpan_phy *wpan_phy,
 				 struct wpan_dev *wpan_dev,
 				 u8 max_csma_backoffs)
 {
-	struct ieee802154_local *local = wpan_phy_priv(wpan_phy);
-
 	ASSERT_RTNL();
 
 	if (wpan_dev->csma_retries == max_csma_backoffs)
 		return 0;
 
-	if (!(local->hw.flags & IEEE802154_HW_CSMA_PARAMS))
-		return -EOPNOTSUPP;
-
 	wpan_dev->csma_retries = max_csma_backoffs;
 	return 0;
 }
@@ -180,16 +166,11 @@ ieee802154_set_max_frame_retries(struct wpan_phy *wpan_phy,
 				 struct wpan_dev *wpan_dev,
 				 s8 max_frame_retries)
 {
-	struct ieee802154_local *local = wpan_phy_priv(wpan_phy);
-
 	ASSERT_RTNL();
 
 	if (wpan_dev->frame_retries == max_frame_retries)
 		return 0;
 
-	if (!(local->hw.flags & IEEE802154_HW_FRAME_RETRIES))
-		return -EOPNOTSUPP;
-
 	wpan_dev->frame_retries = max_frame_retries;
 	return 0;
 }
@@ -198,16 +179,11 @@ static int
 ieee802154_set_lbt_mode(struct wpan_phy *wpan_phy, struct wpan_dev *wpan_dev,
 			bool mode)
 {
-	struct ieee802154_local *local = wpan_phy_priv(wpan_phy);
-
 	ASSERT_RTNL();
 
 	if (wpan_dev->lbt == mode)
 		return 0;
 
-	if (!(local->hw.flags & IEEE802154_HW_LBT))
-		return -EOPNOTSUPP;
-
 	wpan_dev->lbt = mode;
 	return 0;
 }
-- 
2.3.7


  parent reply	other threads:[~2015-05-06 11:41 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-06 11:40 [PATCHv2 wpan-next 00/16] ieee802154: add support for phy capabilities Alexander Aring
2015-05-06 11:40 ` [PATCHv2 wpan-next 01/16] ieee802154: change transmit power to s32 Alexander Aring
2015-05-06 11:40 ` [PATCHv2 wpan-next 02/16] ieee802154: change transmit power to mbm Alexander Aring
2015-05-06 11:40 ` [PATCHv2 wpan-next 03/16] ieee802154: change cca ed level " Alexander Aring
2015-05-06 11:40 ` [PATCHv2 wpan-next 04/16] ieee802154: introduce wpan_phy_supported Alexander Aring
2015-05-06 11:40 ` [PATCHv2 wpan-next 05/16] ieee802154: add several phy supported handling Alexander Aring
2015-05-06 11:40 ` [PATCHv2 wpan-next 06/16] mac802154: check for really changes Alexander Aring
2015-05-06 11:40 ` Alexander Aring [this message]
2015-05-06 11:40 ` [PATCHv2 wpan-next 08/16] ieee802154: add iftypes capability Alexander Aring
2015-05-06 11:40 ` [PATCHv2 wpan-next 09/16] ieee802154: add support for get tx powers Alexander Aring
2015-05-06 12:02   ` Phoebe Buckheister
2015-05-06 13:19     ` Alexander Aring
2015-05-06 11:40 ` [PATCHv2 wpan-next 10/16] ieee802154: add support for get cca ed levels Alexander Aring
2015-05-06 11:40 ` [PATCHv2 wpan-next 11/16] at86rf230: set cca_modes supported flags Alexander Aring
2015-05-06 11:40 ` [PATCHv2 wpan-next 12/16] at86rf230: add reset states of tx power level Alexander Aring
2015-05-06 11:40 ` [PATCHv2 wpan-next 13/16] at86rf230: rework tx power support Alexander Aring
2015-05-06 11:40 ` [PATCHv2 wpan-next 14/16] at86rf230: rework tx cca energy detection level Alexander Aring
2015-05-06 11:40 ` [PATCHv2 wpan-next 15/16] ieee802154: check transmit power before driver layer Alexander Aring
2015-05-06 11:40 ` [PATCHv2 wpan-next 16/16] nl802154: add support for dump phy capabilities Alexander Aring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1430912428-17284-8-git-send-email-alex.aring@gmail.com \
    --to=alex.aring@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-wpan@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox