LinuxPPC-Dev Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Navin Boppuri" <nboppuri@trinetcommunication.com>
To: <linuxppc-embedded@lists.linuxppc.org>
Subject: Help with an SPI driver
Date: Sat, 3 Jun 2000 12:29:40 +0100	[thread overview]
Message-ID: <002401bfcd4f$01a738f0$4a1f76d8@washington> (raw)


Hello,

I have a custom board running an mpc823. It has uart connected to SMC1 which
runs just fine with the available driver. The other 3 uarts are connected to
the SPI controller. I am not an embedded engineer and have no experience
writing device drivers. I was wondering if somone can help me start off
writing one to make the 3 uarts works using the SPI

Thank you,
Navin

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

             reply	other threads:[~2000-06-03 11:29 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2000-06-03 11:29 Navin Boppuri [this message]
2000-12-05 12:18 ` Help with an SPI driver Tobias Otto-Adamczak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='002401bfcd4f$01a738f0$4a1f76d8@washington' \
    --to=nboppuri@trinetcommunication.com \
    --cc=linuxppc-embedded@lists.linuxppc.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox