Help with an SPI driver

Help with an SPI driver

[Navin Boppuri]

Hello,

I have a custom board running an mpc823. It has uart connected to SMC1 which
runs just fine with the available driver. The other 3 uarts are connected to
the SPI controller. I am not an embedded engineer and have no experience
writing device drivers. I was wondering if somone can help me start off
writing one to make the 3 uarts works using the SPI

Thank you,
Navin

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Re: Help with an SPI driver

[Tobias Otto-Adamczak]

> I have a custom board running an mpc823. It has uart connected to SMC1 which
> runs just fine with the available driver. The other 3 uarts are connected to
> the SPI controller. I was wondering if somone can help me start off
> writing one to make the 3 uarts works using the SPI.

I work with a MPC860 on a MBX Board and have the SPI working for use with
an ISDN transceiver (but not as linux uart). I could send you some code
to start with if you want.

Ciao - Tobias

PS: The time stamp of your email said 3 Jun 2000 ...


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/