* Unable to boot Linux 2.4.24 on a custom board similar to 8260ADS
@ 2004-04-20 16:58 Stan Partridge
2004-04-20 21:39 ` Wolfgang Denk
0 siblings, 1 reply; 2+ messages in thread
From: Stan Partridge @ 2004-04-20 16:58 UTC (permalink / raw)
To: 'linuxppc-embedded@lists.linuxppc.org'
[-- Attachment #1: Type: text/plain, Size: 2393 bytes --]
I have worked for sometime now with Motorola processors and other RTOS
however I am a newbie to Linux as an embedded OS. I am attempting to port
ELDK 3.0 (Linux 2.4.24) to our board that somewhat resembles the 8260ADS. I
found u-boot to easy to use and understand.
To get u-boot to work with my board I defined the pin outs in file:
board/mpc8260/mpc8260ads.c
and I setup the physical memory base addresses in the file:
include/configs/MPC8260ADS.h
My board's memory map is different from the standard 8260ADS board. For
u-boot to work on my board I redefined the following found in the header
include/configs/MPC8260ADS.h:
#define CFG_FLASH_BASE 0xFC000000
#define CFG_DEFAULT_IMMR 0xFA200000
#define CFG_IMMR 0xFA200000
#define CFG_BCSR 0xFA100000
#define CFG_SDRAM_BASE 0x00000000
#define CFG_LSDRAM_BASE 0xFB000000
#define CFG_BR0_PRELIM CFG_FLASH_BASE | 0x00000801 /* ID DiskOnChip
*/
#define CFG_OR0_PRELIM 0xFF800836
#define CFG_BR1_PRELIM CFG_BCSR | 0x00000801 /* ID DiskOnChip
*/
#define CFG_OR1_PRELIM 0xFF800836
My question is how do I make the above corresponding changes above to Linux?
When I attempt to boot linux it appears to hang in the function
__delay in entry.S
The contents of the LOG_BUF are as follows:
=> md 1c0094
<6>Memory BAT mapping: BAT2=128Mb, BAT3=0Mb, residual: 0Mb.
<4>Linux version 2.4.24-pre2 (stan@Imas1Linux) (gcc version 3.2.2 20030217
(Yel low Dog Linux 3.0 3.2.2-2a_1)) #1 Mon Apr 19 15:10:51 EDT 2004.
<4>Attempting to use unrecognized host bridge ID 0x54545454..
<4>On node 0 totalpages: 32768.
<4>zone(0): 32768 pages..
<4>zone(1): 0 pages..
In addition, I have attached my kernel .config file.
Any suggestions on how I should proceed?
Thanks in advance,
-Stan Partridge
Some details
------------------------
-Boot 1.0.2 (Apr 13 2004 - 13:50:02)
MPC8260 Reset Status: External Soft, External Hard
MPC8260 Clock Configuration
- Bus-to-Core Mult 2x, VCO Div 2, 60x Bus Freq 50-150, Core Freq 100-300
- dfbrg 1, corecnf 0x04, busdf 3, cpmdf 1, plldf 0, pllmf 1
- vco_out 264000000, scc_clk 66000000, brg_clk 16500000
- cpu_clk 132000000, cpm_clk 132000000, bus_clk 66000000
CPU: MPC8260 (HiP3 Rev 01, Mask B.3 3K23A) at 132 MHz
Board: Motorola MPC8260ADS
I2C: ready
DRAM: 128 MB
DOC: DiskOnChip Millennium @ 0xFC000000, 32 MB
Net: FCC3 ETHERNET
<<ads8260.config>>
[-- Attachment #2: ads8260.config --]
[-- Type: application/octet-stream, Size: 14677 bytes --]
#
# Automatically generated by make menuconfig: don't edit
#
# CONFIG_UID16 is not set
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_HAVE_DEC_LOCK=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_ADVANCED_OPTIONS=y
#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y
#
# Platform support
#
CONFIG_PPC=y
CONFIG_PPC32=y
CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_POWER3 is not set
# CONFIG_POWER4 is not set
# CONFIG_8xx is not set
CONFIG_8260=y
CONFIG_PPC_STD_MMU=y
CONFIG_SERIAL_CONSOLE=y
# CONFIG_ATC is not set
CONFIG_ADS8260=y
# CONFIG_EST8260 is not set
# CONFIG_PM826 is not set
# CONFIG_SBS8260 is not set
# CONFIG_RPX6 is not set
# CONFIG_TQM8260 is not set
# CONFIG_WILLOW is not set
# CONFIG_SMP is not set
CONFIG_EMBEDDEDBOOT=y
#
# General setup
#
CONFIG_HIGHMEM=y
# CONFIG_HIGHMEM_START_BOOL is not set
# CONFIG_LOWMEM_SIZE_BOOL is not set
# CONFIG_KERNEL_START_BOOL is not set
# CONFIG_TASK_SIZE_BOOL is not set
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
# CONFIG_ISA is not set
# CONFIG_EISA is not set
# CONFIG_SBUS is not set
# CONFIG_MCA is not set
CONFIG_PCI=y
# CONFIG_8260_PCI9 is not set
# CONFIG_PC_KEYBOARD is not set
CONFIG_NET=y
CONFIG_SYSCTL=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_ELF=y
CONFIG_KERNEL_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_PCI_NAMES is not set
# CONFIG_HOTPLUG is not set
# CONFIG_PCMCIA is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
# CONFIG_GEN_RTC is not set
# CONFIG_PPC_RTC is not set
# CONFIG_CMDLINE_BOOL is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Plug and Play configuration
#
# CONFIG_PNP is not set
# CONFIG_ISAPNP is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_CISS_MONITOR_THREAD is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_BLK_STATS is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_LVM is not set
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_FILTER is not set
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_KHTTPD is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
#
# Appletalk devices
#
# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_LLC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
#
# ATA/IDE/MFM/RLL support
#
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_IDE_MODES is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI support
#
# CONFIG_SCSI is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_BOOT is not set
# CONFIG_FUSION_ISENSE is not set
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LAN is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_I2O_PCI is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_LAN is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MACE is not set
# CONFIG_BMAC is not set
# CONFIG_GMAC is not set
# CONFIG_SUNLANCE is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_NET_PCI is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=y
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=y
# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPPOE=y
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Console drivers
#
# CONFIG_VGA_CONSOLE is not set
#
# Frame-buffer support
#
# CONFIG_FB is not set
#
# Input core support
#
CONFIG_INPUT=y
CONFIG_INPUT_KEYBDEV=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_UINPUT is not set
#
# Macintosh device drivers
#
#
# Character devices
#
CONFIG_VT=y
# CONFIG_VT_CONSOLE is not set
# CONFIG_SERIAL is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=8
#
# I2C support
#
# CONFIG_I2C is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_MOUSE is not set
#
# Joysticks
#
# CONFIG_INPUT_GAMEPORT is not set
# CONFIG_INPUT_NS558 is not set
# CONFIG_INPUT_LIGHTNING is not set
# CONFIG_INPUT_PCIGAME is not set
# CONFIG_INPUT_CS461X is not set
# CONFIG_INPUT_EMU10K1 is not set
# CONFIG_INPUT_SERIO is not set
# CONFIG_INPUT_SERPORT is not set
# CONFIG_INPUT_ANALOG is not set
# CONFIG_INPUT_A3D is not set
# CONFIG_INPUT_ADI is not set
# CONFIG_INPUT_COBRA is not set
# CONFIG_INPUT_GF2K is not set
# CONFIG_INPUT_GRIP is not set
# CONFIG_INPUT_INTERACT is not set
# CONFIG_INPUT_TMDC is not set
# CONFIG_INPUT_SIDEWINDER is not set
# CONFIG_INPUT_IFORCE_USB is not set
# CONFIG_INPUT_IFORCE_232 is not set
# CONFIG_INPUT_WARRIOR is not set
# CONFIG_INPUT_MAGELLAN is not set
# CONFIG_INPUT_SPACEORB is not set
# CONFIG_INPUT_SPACEBALL is not set
# CONFIG_INPUT_STINGER is not set
# CONFIG_INPUT_DB9 is not set
# CONFIG_INPUT_GAMECON is not set
# CONFIG_INPUT_TURBOGRAFX is not set
# CONFIG_QIC02_TAPE is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_IPMI_PANIC_EVENT is not set
# CONFIG_IPMI_DEVICE_INTERFACE is not set
# CONFIG_IPMI_KCS is not set
# CONFIG_IPMI_WATCHDOG is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_SCx200_GPIO is not set
# CONFIG_AMD_PM768 is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_RTC_11_MINUTE_MODE is not set
# CONFIG_PCF8563_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_FLASH is not set
# CONFIG_STATUS_LED is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
#
# Direct Rendering Manager (XFree86 DRI support)
#
# CONFIG_DRM is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_QFMT_V2 is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BEFS_DEBUG is not set
# CONFIG_BFS_FS is not set
CONFIG_EXT3_FS=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_FAT_FS is not set
# CONFIG_MSDOS_FS is not set
# CONFIG_UMSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
CONFIG_TMPFS=y
CONFIG_RAMFS=y
# CONFIG_ISO9660_FS is not set
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
# CONFIG_JFS_FS is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_XFS_FS is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_RT is not set
# CONFIG_XFS_TRACE is not set
# CONFIG_XFS_DEBUG is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
# CONFIG_ZISOFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_SMB_NLS is not set
# CONFIG_NLS is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# MPC8260 CPM Options
#
CONFIG_SCC_CONSOLE=y
# CONFIG_SCC_ENET is not set
CONFIG_FEC_ENET=y
# CONFIG_FCC1_ENET is not set
# CONFIG_FCC2_ENET is not set
CONFIG_FCC3_ENET=y
# CONFIG_USE_MDIO is not set
# CONFIG_FCC_LXT970 is not set
CONFIG_FCC_LXT971=y
# CONFIG_FCC_QS6612 is not set
# CONFIG_FCC_AMD79C873 is not set
# CONFIG_FCC_DM9131 is not set
# CONFIG_CPM_SPI is not set
CONFIG_PORT_CTS1_NONE=y
# CONFIG_CTS1_15 is not set
# CONFIG_CTS1_29 is not set
CONFIG_PORT_RTS1_NONE=y
# CONFIG_UART_RTS_CONTROL_SCC1 is not set
CONFIG_PORT_CD1_NONE=y
# CONFIG_UART_CD_CONTROL_SCC1 is not set
CONFIG_PORT_DTR1_NONE=y
# CONFIG_PORT_DTR1_A is not set
# CONFIG_PORT_DTR1_B is not set
# CONFIG_PORT_DTR1_C is not set
# CONFIG_PORT_DTR1_D is not set
CONFIG_PORT_CTS2_NONE=y
# CONFIG_CTS2_13 is not set
# CONFIG_CTS2_28 is not set
CONFIG_PORT_RTS2_NONE=y
# CONFIG_UART_RTS_CONTROL_SCC2 is not set
CONFIG_PORT_CD2_NONE=y
# CONFIG_UART_CD_CONTROL_SCC2 is not set
CONFIG_PORT_DTR2_NONE=y
# CONFIG_PORT_DTR2_A is not set
# CONFIG_PORT_DTR2_B is not set
# CONFIG_PORT_DTR2_C is not set
# CONFIG_PORT_DTR2_D is not set
CONFIG_PORT_CTS3_NONE=y
# CONFIG_UART_CTS_CONTROL_SCC3 is not set
CONFIG_PORT_RTS3_NONE=y
# CONFIG_UART_RTS_CONTROL_SCC3 is not set
CONFIG_PORT_CD3_NONE=y
# CONFIG_UART_CD_CONTROL_SCC3 is not set
CONFIG_PORT_DTR3_NONE=y
# CONFIG_PORT_DTR3_A is not set
# CONFIG_PORT_DTR3_B is not set
# CONFIG_PORT_DTR3_C is not set
# CONFIG_PORT_DTR3_D is not set
CONFIG_PORT_CTS4_NONE=y
# CONFIG_UART_CTS_CONTROL_SCC4 is not set
CONFIG_PORT_RTS4_NONE=y
# CONFIG_UART_RTS_CONTROL_SCC4 is not set
CONFIG_PORT_CD4_NONE=y
# CONFIG_UART_CD_CONTROL_SCC4 is not set
CONFIG_PORT_DTR4_NONE=y
# CONFIG_PORT_DTR4_A is not set
# CONFIG_PORT_DTR4_B is not set
# CONFIG_PORT_DTR4_C is not set
# CONFIG_PORT_DTR4_D is not set
#
# USB support
#
# CONFIG_USB is not set
#
# Support for USB gadgets
#
# CONFIG_USB_GADGET is not set
#
# Bluetooth support
#
# CONFIG_BLUEZ is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Library routines
#
# CONFIG_CRC32 is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_IOVIRT is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_WAITQ is not set
# CONFIG_KGDB is not set
# CONFIG_KGDB_CONSOLE is not set
# CONFIG_XMON is not set
# CONFIG_BDI_SWITCH is not set
CONFIG_LOG_BUF_SHIFT=0
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Unable to boot Linux 2.4.24 on a custom board similar to 8260ADS
2004-04-20 16:58 Unable to boot Linux 2.4.24 on a custom board similar to 8260ADS Stan Partridge
@ 2004-04-20 21:39 ` Wolfgang Denk
0 siblings, 0 replies; 2+ messages in thread
From: Wolfgang Denk @ 2004-04-20 21:39 UTC (permalink / raw)
To: Stan Partridge; +Cc: 'linuxppc-embedded@lists.linuxppc.org'
In message <A0CF3E6CD78CD411B369009027B0FCFE04313405@MIMIR> you wrote:
>
> My question is how do I make the above corresponding changes above to Linux?
Only the mapping of the IMMR must be identical, and the bd_info structure.
> When I attempt to boot linux it appears to hang in the function
>
> __delay in entry.S
Did you make sure that clocks_in_mhz is unset in your U-Boot environ-
ment? And did you really make sure that U-Boot and Linux use the SAME
bd_info structure? My guess is your clock frequencies might be wrong.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de
Every solution breeds new problems.
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2004-04-20 21:39 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-04-20 16:58 Unable to boot Linux 2.4.24 on a custom board similar to 8260ADS Stan Partridge
2004-04-20 21:39 ` Wolfgang Denk
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox