* [PATCH 6/10 v2] Add 8641 Register space and IRQ definitions.
From: Jon Loeliger @ 2006-06-08 22:00 UTC (permalink / raw)
To: linuxppc-dev@ozlabs.org
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Jeff Brown <Jeff.Brown@freescale.com>
Signed-off-by: Xianghua Xiao <x.xiao@freescale.com>
---
include/asm-powerpc/immap_86xx.h | 199 ++++++++++++++++++++++++++++++++++++++
include/asm-powerpc/irq.h | 88 +++++++++++++++++
include/asm-powerpc/mpc86xx.h | 47 +++++++++
3 files changed, 334 insertions(+), 0 deletions(-)
diff --git a/include/asm-powerpc/immap_86xx.h b/include/asm-powerpc/immap_86xx.h
new file mode 100644
index 0000000..d905b66
--- /dev/null
+++ b/include/asm-powerpc/immap_86xx.h
@@ -0,0 +1,199 @@
+/*
+ * MPC86xx Internal Memory Map
+ *
+ * Author: Jeff Brown
+ *
+ * Copyright 2004 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __ASM_POWERPC_IMMAP_86XX_H__
+#define __ASM_POWERPC_IMMAP_86XX_H__
+#ifdef __KERNEL__
+
+/* Eventually this should define all the IO block registers in 86xx */
+
+/* PCI Registers */
+typedef struct ccsr_pci {
+ uint cfg_addr; /* 0x.000 - PCI Configuration Address Register */
+ uint cfg_data; /* 0x.004 - PCI Configuration Data Register */
+ uint int_ack; /* 0x.008 - PCI Interrupt Acknowledge Register */
+ char res1[3060];
+ uint potar0; /* 0x.c00 - PCI Outbound Transaction Address Register 0 */
+ uint potear0; /* 0x.c04 - PCI Outbound Translation Extended Address Register 0 */
+ uint powbar0; /* 0x.c08 - PCI Outbound Window Base Address Register 0 */
+ char res2[4];
+ uint powar0; /* 0x.c10 - PCI Outbound Window Attributes Register 0 */
+ char res3[12];
+ uint potar1; /* 0x.c20 - PCI Outbound Transaction Address Register 1 */
+ uint potear1; /* 0x.c24 - PCI Outbound Translation Extended Address Register 1 */
+ uint powbar1; /* 0x.c28 - PCI Outbound Window Base Address Register 1 */
+ char res4[4];
+ uint powar1; /* 0x.c30 - PCI Outbound Window Attributes Register 1 */
+ char res5[12];
+ uint potar2; /* 0x.c40 - PCI Outbound Transaction Address Register 2 */
+ uint potear2; /* 0x.c44 - PCI Outbound Translation Extended Address Register 2 */
+ uint powbar2; /* 0x.c48 - PCI Outbound Window Base Address Register 2 */
+ char res6[4];
+ uint powar2; /* 0x.c50 - PCI Outbound Window Attributes Register 2 */
+ char res7[12];
+ uint potar3; /* 0x.c60 - PCI Outbound Transaction Address Register 3 */
+ uint potear3; /* 0x.c64 - PCI Outbound Translation Extended Address Register 3 */
+ uint powbar3; /* 0x.c68 - PCI Outbound Window Base Address Register 3 */
+ char res8[4];
+ uint powar3; /* 0x.c70 - PCI Outbound Window Attributes Register 3 */
+ char res9[12];
+ uint potar4; /* 0x.c80 - PCI Outbound Transaction Address Register 4 */
+ uint potear4; /* 0x.c84 - PCI Outbound Translation Extended Address Register 4 */
+ uint powbar4; /* 0x.c88 - PCI Outbound Window Base Address Register 4 */
+ char res10[4];
+ uint powar4; /* 0x.c90 - PCI Outbound Window Attributes Register 4 */
+ char res11[268];
+ uint pitar3; /* 0x.da0 - PCI Inbound Translation Address Register 3 */
+ char res12[4];
+ uint piwbar3; /* 0x.da8 - PCI Inbound Window Base Address Register 3 */
+ uint piwbear3; /* 0x.dac - PCI Inbound Window Base Extended Address Register 3 */
+ uint piwar3; /* 0x.db0 - PCI Inbound Window Attributes Register 3 */
+ char res13[12];
+ uint pitar2; /* 0x.dc0 - PCI Inbound Translation Address Register 2 */
+ char res14[4];
+ uint piwbar2; /* 0x.dc8 - PCI Inbound Window Base Address Register 2 */
+ uint piwbear2; /* 0x.dcc - PCI Inbound Window Base Extended Address Register 2 */
+ uint piwar2; /* 0x.dd0 - PCI Inbound Window Attributes Register 2 */
+ char res15[12];
+ uint pitar1; /* 0x.de0 - PCI Inbound Translation Address Register 1 */
+ char res16[4];
+ uint piwbar1; /* 0x.de8 - PCI Inbound Window Base Address Register 1 */
+ char res17[4];
+ uint piwar1; /* 0x.df0 - PCI Inbound Window Attributes Register 1 */
+ char res18[12];
+ uint err_dr; /* 0x.e00 - PCI Error Detect Register */
+ uint err_cap_dr; /* 0x.e04 - PCI Error Capture Disable Register */
+ uint err_en; /* 0x.e08 - PCI Error Enable Register */
+ uint err_attrib; /* 0x.e0c - PCI Error Attributes Capture Register */
+ uint err_addr; /* 0x.e10 - PCI Error Address Capture Register */
+ uint err_ext_addr; /* 0x.e14 - PCI Error Extended Address Capture Register */
+ uint err_dl; /* 0x.e18 - PCI Error Data Low Capture Register */
+ uint err_dh; /* 0x.e1c - PCI Error Data High Capture Register */
+ uint gas_timr; /* 0x.e20 - PCI Gasket Timer Register */
+ uint pci_timr; /* 0x.e24 - PCI Timer Register */
+ char res19[472];
+} ccsr_pci_t;
+
+/* PCI Express Registers */
+typedef struct ccsr_pex {
+ uint pex_config_addr; /* 0x.000 - PCI Express Configuration Address Register */
+ uint pex_config_data; /* 0x.004 - PCI Express Configuration Data Register */
+ char res1[4];
+ uint pex_otb_cpl_tor; /* 0x.00c - PCI Express Outbound completion timeout register */
+ uint pex_conf_tor; /* 0x.010 - PCI Express configuration timeout register */
+ char res2[12];
+ uint pex_pme_mes_dr; /* 0x.020 - PCI Express PME and message detect register */
+ uint pex_pme_mes_disr; /* 0x.024 - PCI Express PME and message disable register */
+ uint pex_pme_mes_ier; /* 0x.028 - PCI Express PME and message interrupt enable register */
+ uint pex_pmcr; /* 0x.02c - PCI Express power management command register */
+ char res3[3024];
+ uint pexotar0; /* 0x.c00 - PCI Express outbound translation address register 0 */
+ uint pexotear0; /* 0x.c04 - PCI Express outbound translation extended address register 0*/
+ char res4[8];
+ uint pexowar0; /* 0x.c10 - PCI Express outbound window attributes register 0*/
+ char res5[12];
+ uint pexotar1; /* 0x.c20 - PCI Express outbound translation address register 1 */
+ uint pexotear1; /* 0x.c24 - PCI Express outbound translation extended address register 1*/
+ uint pexowbar1; /* 0x.c28 - PCI Express outbound window base address register 1*/
+ char res6[4];
+ uint pexowar1; /* 0x.c30 - PCI Express outbound window attributes register 1*/
+ char res7[12];
+ uint pexotar2; /* 0x.c40 - PCI Express outbound translation address register 2 */
+ uint pexotear2; /* 0x.c44 - PCI Express outbound translation extended address register 2*/
+ uint pexowbar2; /* 0x.c48 - PCI Express outbound window base address register 2*/
+ char res8[4];
+ uint pexowar2; /* 0x.c50 - PCI Express outbound window attributes register 2*/
+ char res9[12];
+ uint pexotar3; /* 0x.c60 - PCI Express outbound translation address register 3 */
+ uint pexotear3; /* 0x.c64 - PCI Express outbound translation extended address register 3*/
+ uint pexowbar3; /* 0x.c68 - PCI Express outbound window base address register 3*/
+ char res10[4];
+ uint pexowar3; /* 0x.c70 - PCI Express outbound window attributes register 3*/
+ char res11[12];
+ uint pexotar4; /* 0x.c80 - PCI Express outbound translation address register 4 */
+ uint pexotear4; /* 0x.c84 - PCI Express outbound translation extended address register 4*/
+ uint pexowbar4; /* 0x.c88 - PCI Express outbound window base address register 4*/
+ char res12[4];
+ uint pexowar4; /* 0x.c90 - PCI Express outbound window attributes register 4*/
+ char res13[12];
+ char res14[256];
+ uint pexitar3; /* 0x.da0 - PCI Express inbound translation address register 3 */
+ char res15[4];
+ uint pexiwbar3; /* 0x.da8 - PCI Express inbound window base address register 3 */
+ uint pexiwbear3; /* 0x.dac - PCI Express inbound window base extended address register 3 */
+ uint pexiwar3; /* 0x.db0 - PCI Express inbound window attributes register 3 */
+ char res16[12];
+ uint pexitar2; /* 0x.dc0 - PCI Express inbound translation address register 2 */
+ char res17[4];
+ uint pexiwbar2; /* 0x.dc8 - PCI Express inbound window base address register 2 */
+ uint pexiwbear2; /* 0x.dcc - PCI Express inbound window base extended address register 2 */
+ uint pexiwar2; /* 0x.dd0 - PCI Express inbound window attributes register 2 */
+ char res18[12];
+ uint pexitar1; /* 0x.de0 - PCI Express inbound translation address register 2 */
+ char res19[4];
+ uint pexiwbar1; /* 0x.de8 - PCI Express inbound window base address register 2 */
+ uint pexiwbear1; /* 0x.dec - PCI Express inbound window base extended address register 2 */
+ uint pexiwar1; /* 0x.df0 - PCI Express inbound window attributes register 2 */
+ char res20[12];
+ uint pex_err_dr; /* 0x.e00 - PCI Express error detect register */
+ char res21[4];
+ uint pex_err_en; /* 0x.e08 - PCI Express error interrupt enable register */
+ char res22[4];
+ uint pex_err_disr; /* 0x.e10 - PCI Express error disable register */
+ char res23[12];
+ uint pex_err_cap_stat; /* 0x.e20 - PCI Express error capture status register */
+ char res24[4];
+ uint pex_err_cap_r0; /* 0x.e28 - PCI Express error capture register 0 */
+ uint pex_err_cap_r1; /* 0x.e2c - PCI Express error capture register 0 */
+ uint pex_err_cap_r2; /* 0x.e30 - PCI Express error capture register 0 */
+ uint pex_err_cap_r3; /* 0x.e34 - PCI Express error capture register 0 */
+} ccsr_pex_t;
+
+/* Global Utility Registers */
+typedef struct ccsr_guts {
+ uint porpllsr; /* 0x.0000 - POR PLL Ratio Status Register */
+ uint porbmsr; /* 0x.0004 - POR Boot Mode Status Register */
+ uint porimpscr; /* 0x.0008 - POR I/O Impedance Status and Control Register */
+ uint pordevsr; /* 0x.000c - POR I/O Device Status Register */
+ uint pordbgmsr; /* 0x.0010 - POR Debug Mode Status Register */
+ char res1[12];
+ uint gpporcr; /* 0x.0020 - General-Purpose POR Configuration Register */
+ char res2[12];
+ uint gpiocr; /* 0x.0030 - GPIO Control Register */
+ char res3[12];
+ uint gpoutdr; /* 0x.0040 - General-Purpose Output Data Register */
+ char res4[12];
+ uint gpindr; /* 0x.0050 - General-Purpose Input Data Register */
+ char res5[12];
+ uint pmuxcr; /* 0x.0060 - Alternate Function Signal Multiplex Control */
+ char res6[12];
+ uint devdisr; /* 0x.0070 - Device Disable Control */
+ char res7[12];
+ uint powmgtcsr; /* 0x.0080 - Power Management Status and Control Register */
+ char res8[12];
+ uint mcpsumr; /* 0x.0090 - Machine Check Summary Register */
+ char res9[12];
+ uint pvr; /* 0x.00a0 - Processor Version Register */
+ uint svr; /* 0x.00a4 - System Version Register */
+ char res10[3416];
+ uint clkocr; /* 0x.0e00 - Clock Out Select Register */
+ char res11[12];
+ uint ddrdllcr; /* 0x.0e10 - DDR DLL Control Register */
+ char res12[12];
+ uint lbcdllcr; /* 0x.0e20 - LBC DLL Control Register */
+ char res13[61916];
+} ccsr_guts_t;
+
+#endif /* __ASM_POWERPC_IMMAP_86XX_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/irq.h b/include/asm-powerpc/irq.h
index 7bc6d73..997d2e8 100644
--- a/include/asm-powerpc/irq.h
+++ b/include/asm-powerpc/irq.h
@@ -348,6 +348,94 @@ #define SIU_INT_PC2 ((uint)0x3d+CPM_IRQ
#define SIU_INT_PC1 ((uint)0x3e+CPM_IRQ_OFFSET)
#define SIU_INT_PC0 ((uint)0x3f+CPM_IRQ_OFFSET)
+#elif defined(CONFIG_PPC_86xx)
+#include <asm/mpc86xx.h>
+
+#define NR_EPIC_INTS 48
+#ifndef NR_8259_INTS
+#define NR_8259_INTS 16 /*ULI 1575 can route 12 interrupts */
+#endif
+#define NUM_8259_INTERRUPTS NR_8259_INTS
+
+#ifndef I8259_OFFSET
+#define I8259_OFFSET 0
+#endif
+
+#define NR_IRQS 256
+
+/* Internal IRQs on MPC86xx OpenPIC */
+
+#ifndef MPC86xx_OPENPIC_IRQ_OFFSET
+#define MPC86xx_OPENPIC_IRQ_OFFSET NR_8259_INTS
+#endif
+
+/* The 48 internal sources */
+#define MPC86xx_IRQ_NULL ( 0 + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_MCM ( 1 + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_DDR ( 2 + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_LBC ( 3 + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_DMA0 ( 4 + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_DMA1 ( 5 + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_DMA2 ( 6 + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_DMA3 ( 7 + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_PEX1 ( 8 + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_PEX2 ( 9 + MPC86xx_OPENPIC_IRQ_OFFSET)
+
+/* no 10,11 */
+#define MPC86xx_IRQ_UART2 (12 + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_TSEC1_TX (13 + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_TSEC1_RX (14 + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_TSEC3_TX (15 + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_TSEC3_RX (16 + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_TSEC3_ERROR (17 + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_TSEC1_ERROR (18 + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_TSEC2_TX (19 + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_TSEC2_RX (20 + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_TSEC4_TX (21 + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_TSEC4_RX (22 + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_TSEC4_ERROR (23 + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_TSEC2_ERROR (24 + MPC86xx_OPENPIC_IRQ_OFFSET)
+/* no 25 */
+#define MPC86xx_IRQ_UART1 (26 + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_IIC (27 + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_PERFMON (28 + MPC86xx_OPENPIC_IRQ_OFFSET)
+/* no 29,30,31 */
+#define MPC86xx_IRQ_SRIO_ERROR (32 + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_SRIO_OUT_BELL (33 + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_SRIO_IN_BELL (34 + MPC86xx_OPENPIC_IRQ_OFFSET)
+/* no 35,36 */
+#define MPC86xx_IRQ_SRIO_OUT_MSG1 (37 + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_SRIO_IN_MSG1 (38 + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_SRIO_OUT_MSG2 (39 + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_SRIO_IN_MSG2 (40 + MPC86xx_OPENPIC_IRQ_OFFSET)
+
+/* The 12 external interrupt lines */
+#define MPC86xx_IRQ_EXT_BASE 48
+#define MPC86xx_IRQ_EXT0 (0 + MPC86xx_IRQ_EXT_BASE \
+ + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_EXT1 (1 + MPC86xx_IRQ_EXT_BASE \
+ + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_EXT2 (2 + MPC86xx_IRQ_EXT_BASE \
+ + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_EXT3 (3 + MPC86xx_IRQ_EXT_BASE \
+ + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_EXT4 (4 + MPC86xx_IRQ_EXT_BASE \
+ + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_EXT5 (5 + MPC86xx_IRQ_EXT_BASE \
+ + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_EXT6 (6 + MPC86xx_IRQ_EXT_BASE \
+ + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_EXT7 (7 + MPC86xx_IRQ_EXT_BASE \
+ + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_EXT8 (8 + MPC86xx_IRQ_EXT_BASE \
+ + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_EXT9 (9 + MPC86xx_IRQ_EXT_BASE \
+ + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_EXT10 (10 + MPC86xx_IRQ_EXT_BASE \
+ + MPC86xx_OPENPIC_IRQ_OFFSET)
+#define MPC86xx_IRQ_EXT11 (11 + MPC86xx_IRQ_EXT_BASE \
+ + MPC86xx_OPENPIC_IRQ_OFFSET)
+
#else /* CONFIG_40x + CONFIG_8xx */
/*
* this is the # irq's for all ppc arch's (pmac/chrp/prep)
diff --git a/include/asm-powerpc/mpc86xx.h b/include/asm-powerpc/mpc86xx.h
new file mode 100644
index 0000000..d0a6718
--- /dev/null
+++ b/include/asm-powerpc/mpc86xx.h
@@ -0,0 +1,47 @@
+/*
+ * MPC86xx definitions
+ *
+ * Author: Jeff Brown
+ *
+ * Copyright 2004 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_POWERPC_MPC86xx_H__
+#define __ASM_POWERPC_MPC86xx_H__
+
+#include <linux/config.h>
+#include <asm/mmu.h>
+
+#ifdef CONFIG_PPC_86xx
+
+#ifdef CONFIG_MPC8641_HPCN
+#include <platforms/86xx/mpc8641_hpcn.h>
+#endif
+
+#define _IO_BASE isa_io_base
+#define _ISA_MEM_BASE isa_mem_base
+#ifdef CONFIG_PCI
+#define PCI_DRAM_OFFSET pci_dram_offset
+#else
+#define PCI_DRAM_OFFSET 0
+#endif
+
+#define CPU0_BOOT_RELEASE 0x01000000
+#define CPU1_BOOT_RELEASE 0x02000000
+#define CPU_ALL_RELEASED (CPU0_BOOT_RELEASE | CPU1_BOOT_RELEASE)
+#define MCM_PORT_CONFIG_OFFSET 0x1010
+
+/* Offset from CCSRBAR */
+#define MPC86xx_OPENPIC_OFFSET (0x40000)
+#define MPC86xx_MCM_OFFSET (0x00000)
+#define MPC86xx_MCM_SIZE (0x02000)
+
+#endif /* CONFIG_PPC_86xx */
+#endif /* __ASM_POWERPC_MPC86xx_H__ */
+#endif /* __KERNEL__ */
^ permalink raw reply related
* [PATCH 7/10 v2] Add default mpc8641_hpcn config file.
From: Jon Loeliger @ 2006-06-08 22:01 UTC (permalink / raw)
To: linuxppc-dev@ozlabs.org
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
---
arch/powerpc/configs/mpc8641_hpcn_defconfig | 920 +++++++++++++++++++++++++++
1 files changed, 920 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/configs/mpc8641_hpcn_defconfig b/arch/powerpc/configs/mpc8641_hpcn_defconfig
new file mode 100644
index 0000000..1113a7c
--- /dev/null
+++ b/arch/powerpc/configs/mpc8641_hpcn_defconfig
@@ -0,0 +1,920 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.17-rc4
+# Thu Jun 8 09:24:18 2006
+#
+# CONFIG_PPC64 is not set
+CONFIG_PPC32=y
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_PPC_UDBG_16550=y
+CONFIG_GENERIC_TBSYNC=y
+# CONFIG_DEFAULT_UIMAGE is not set
+
+#
+# Processor support
+#
+# CONFIG_CLASSIC32 is not set
+# CONFIG_PPC_52xx is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_85xx is not set
+CONFIG_PPC_86xx=y
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+CONFIG_6xx=y
+CONFIG_PPC_FPU=y
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+# CONFIG_SLAB is not set
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_SLOB=y
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_MPIC=y
+# CONFIG_WANT_EARLY_SERIAL is not set
+CONFIG_PPC_INDIRECT_PCI_BE=y
+
+#
+# Platform Support
+#
+CONFIG_MPC8641_HPCN=y
+CONFIG_MPC8641=y
+CONFIG_PEX=y
+CONFIG_I8259_LEVEL_TRIGGER=y
+
+#
+# Kernel options
+#
+CONFIG_HIGHMEM=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_BKL=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_IRQ_ALL_CPUS is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+# CONFIG_SECCOMP is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_I8259=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+# CONFIG_WINDFARM is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+CONFIG_VITESSE_PHY=y
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_PCI is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+# CONFIG_GFAR_NAPI is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+CONFIG_SENSORS_EEPROM=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+# CONFIG_NFSD_V3 is not set
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+CONFIG_LDM_PARTITION=y
+# CONFIG_LDM_DEBUG is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+
+#
+# Instrumentation Support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_UNWIND_INFO is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
^ permalink raw reply related
* [PATCH 8/10] Add Vitesse 8244 PHY for MPC8641 HPCN platform.
From: Jon Loeliger @ 2006-06-08 22:02 UTC (permalink / raw)
To: linuxppc-dev@ozlabs.org, netdev, jeff
Signed-off-by: Kriston Carson <KristonCarson@freescale.com>
Signed-off-by: Xianghua Xiao <x.xiao@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
---
drivers/net/Kconfig | 6 +-
drivers/net/phy/Kconfig | 5 ++
drivers/net/phy/Makefile | 1
drivers/net/phy/vitesse.c | 112 +++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 121 insertions(+), 3 deletions(-)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index bdaaad8..c1c2758 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2179,11 +2179,11 @@ config SPIDER_NET
config GIANFAR
tristate "Gianfar Ethernet"
- depends on 85xx || 83xx
+ depends on 85xx || 83xx || PPC_86xx
select PHYLIB
help
- This driver supports the Gigabit TSEC on the MPC85xx
- family of chips, and the FEC on the 8540
+ This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
+ and MPC86xx family of chips, and the FEC on the 8540.
config GFAR_NAPI
bool "NAPI Support"
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index fa39b94..76e51b1 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -44,6 +44,11 @@ config CICADA_PHY
depends on PHYLIB
---help---
Currently supports the cis8204
+config VITESSE_PHY
+ tristate "Drivers for the Vitesse PHYs"
+ depends on PHYLIB
+ ---help---
+ Currently supports the vsc8244
endmenu
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index e4116a5..a8d066e 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -8,3 +8,4 @@ obj-$(CONFIG_DAVICOM_PHY) += davicom.o
obj-$(CONFIG_CICADA_PHY) += cicada.o
obj-$(CONFIG_LXT_PHY) += lxt.o
obj-$(CONFIG_QSEMI_PHY) += qsemi.o
+obj-$(CONFIG_VITESSE_PHY) += vitesse.o
diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c
new file mode 100644
index 0000000..ffd215d
--- /dev/null
+++ b/drivers/net/phy/vitesse.c
@@ -0,0 +1,112 @@
+/*
+ * Driver for Vitesse PHYs
+ *
+ * Author: Kriston Carson
+ *
+ * Copyright (c) 2005 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+
+/* Vitesse Extended Control Register 1 */
+#define MII_VSC8244_EXT_CON1 0x17
+#define MII_VSC8244_EXTCON1_INIT 0x0000
+
+/* Vitesse Interrupt Mask Register */
+#define MII_VSC8244_IMASK 0x19
+#define MII_VSC8244_IMASK_IEN 0x8000
+#define MII_VSC8244_IMASK_SPEED 0x4000
+#define MII_VSC8244_IMASK_LINK 0x2000
+#define MII_VSC8244_IMASK_DUPLEX 0x1000
+#define MII_VSC8244_IMASK_MASK 0xf000
+
+/* Vitesse Interrupt Status Register */
+#define MII_VSC8244_ISTAT 0x1a
+#define MII_VSC8244_ISTAT_STATUS 0x8000
+#define MII_VSC8244_ISTAT_SPEED 0x4000
+#define MII_VSC8244_ISTAT_LINK 0x2000
+#define MII_VSC8244_ISTAT_DUPLEX 0x1000
+
+/* Vitesse Auxiliary Control/Status Register */
+#define MII_VSC8244_AUX_CONSTAT 0x1c
+#define MII_VSC8244_AUXCONSTAT_INIT 0x0004
+#define MII_VSC8244_AUXCONSTAT_DUPLEX 0x0020
+#define MII_VSC8244_AUXCONSTAT_SPEED 0x0018
+#define MII_VSC8244_AUXCONSTAT_GBIT 0x0010
+#define MII_VSC8244_AUXCONSTAT_100 0x0008
+
+MODULE_DESCRIPTION("Vitesse PHY driver");
+MODULE_AUTHOR("Kriston Carson");
+MODULE_LICENSE("GPL");
+
+static int vsc824x_config_init(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT,
+ MII_VSC8244_AUXCONSTAT_INIT);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_VSC8244_EXT_CON1,
+ MII_VSC8244_EXTCON1_INIT);
+ return err;
+}
+
+static int vsc824x_ack_interrupt(struct phy_device *phydev)
+{
+ int err = phy_read(phydev, MII_VSC8244_ISTAT);
+
+ return (err < 0) ? err : 0;
+}
+
+static int vsc824x_config_intr(struct phy_device *phydev)
+{
+ int err;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ err = phy_write(phydev, MII_VSC8244_IMASK,
+ MII_VSC8244_IMASK_MASK);
+ else
+ err = phy_write(phydev, MII_VSC8244_IMASK, 0);
+ return err;
+}
+
+/* Vitesse 824x */
+static struct phy_driver vsc8244_driver = {
+ .phy_id = 0x000fc6c2,
+ .name = "Vitesse VSC8244",
+ .phy_id_mask = 0x000fffc0,
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &vsc824x_config_init,
+ .config_aneg = &genphy_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &vsc824x_ack_interrupt,
+ .config_intr = &vsc824x_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+};
+
+static int __init vsc8244_init(void)
+{
+ return phy_driver_register(&vsc8244_driver);
+}
+
+static void __exit vsc8244_exit(void)
+{
+ phy_driver_unregister(&vsc8244_driver);
+}
+
+module_init(vsc8244_init);
+module_exit(vsc8244_exit);
^ permalink raw reply related
* [PATCH 9/10 v2] Prevent duplicate memory reservations for the Device Tree blob itself.
From: Jon Loeliger @ 2006-06-08 22:03 UTC (permalink / raw)
To: linuxppc-dev@ozlabs.org
Signed-off-by: Jon Loeliger <jdl@freescale.com>
---
arch/powerpc/kernel/prom.c | 13 +++++++++++--
1 files changed, 11 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 969f4ab..0a2c2cb 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -1264,13 +1264,16 @@ static void __init early_reserve_mem(voi
{
u64 base, size;
u64 *reserve_map;
+ unsigned long self_base;
+ unsigned long self_size;
reserve_map = (u64 *)(((unsigned long)initial_boot_params) +
initial_boot_params->off_mem_rsvmap);
/* before we do anything, lets reserve the dt blob */
- lmb_reserve(__pa((unsigned long)initial_boot_params),
- initial_boot_params->totalsize);
+ self_base = __pa((unsigned long)initial_boot_params);
+ self_size = initial_boot_params->totalsize;
+ lmb_reserve(self_base, self_size);
#ifdef CONFIG_PPC32
/*
@@ -1286,6 +1289,9 @@ #ifdef CONFIG_PPC32
size_32 = *(reserve_map_32++);
if (size_32 == 0)
break;
+ /* skip if the reservation is for the blob */
+ if (base_32 == self_base && size_32 == self_size)
+ continue;
DBG("reserving: %x -> %x\n", base_32, size_32);
lmb_reserve(base_32, size_32);
}
@@ -1297,6 +1303,9 @@ #endif
size = *(reserve_map++);
if (size == 0)
break;
+ /* skip if the reservation is for the blob */
+ if (base == self_base && size == self_size)
+ continue;
DBG("reserving: %llx -> %llx\n", base, size);
lmb_reserve(base, size);
}
^ permalink raw reply related
* [PATCH 10/10 v2] Document I2C_MPC option for 86xx too.
From: Jon Loeliger @ 2006-06-08 22:04 UTC (permalink / raw)
To: linuxppc-dev@ozlabs.org, khali
Signed-off-by: Jon Loeliger <jdl@freescale.com>
---
drivers/i2c/busses/Kconfig | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index d6d4494..fbeae82 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -252,12 +252,12 @@ config I2C_POWERMAC
will be called i2c-powermac.
config I2C_MPC
- tristate "MPC107/824x/85xx/52xx"
+ tristate "MPC107/824x/85xx/52xx/86xx"
depends on I2C && PPC32
help
If you say yes to this option, support will be included for the
built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245 and
- MPC85xx family processors. The driver may also work on 52xx
+ MPC85xx/MPC8641 family processors. The driver may also work on 52xx
family processors, though interrupts are known not to work.
This driver can also be built as a module. If so, the module
^ permalink raw reply related
* Debugging tools
From: David H. Lynch Jr. @ 2006-06-08 23:08 UTC (permalink / raw)
To: linuxppc-embedded
In-Reply-To: <200606011700.k51H0WJw014425@www-webmail1.magma.ca>
I have encountered one of the rare instances where I need/want more
debugging resources than an LED on an IO port.
I am looking for some recommendations as well as understanding of
the lighter weight debugging tools that are available.
I am dealing with a Xilinx V4 PPC405 FPGA. It is hosted in a
computer running Windows XP. Aparently there is a JTAG port
on the device that emulates a JTAG parallel port on LPT3 on the host
side.
I was hoping to be able to bring up gdb, download an elf file to the
target and step through a program to see where it is going off the rails.
A bit of research suggests that there are gdbservers that bridge
between gdb and JTAG. But all the links I have found to rproxy seem to
be broken, and those for gdbproxy seem to be
for other processors.
^ permalink raw reply
* RE: Debugging tools
From: Martin, Tim @ 2006-06-09 0:11 UTC (permalink / raw)
To: dhlii, linuxppc-embedded
>=20
> I was hoping to be able to bring up gdb, download an elf file to
the
> target and step through a program to see where it is going off the
rails.
>=20
Assuming you have the Xilinx EDK tools installed, there is a program
called xmd that acts as a standalone debugger or can communicate with
gdb over a socket.
> A bit of research suggests that there are gdbservers that bridge
> between gdb and JTAG. But all the links I have found to rproxy seem to
> be broken, and those for gdbproxy seem to be
> for other processors.
EDK builds example programs when you use the BSB. You can download and
debug these programs as a test. From EDK 7.1, Tools->Software Debugger.
Tim
^ permalink raw reply
* Re: [PATCH 2/10 v2] Add the MPC8641 HPCN platform files.
From: Kumar Gala @ 2006-06-09 0:12 UTC (permalink / raw)
To: Jon Loeliger; +Cc: linuxppc-dev@ozlabs.org
In-Reply-To: <1149803821.23938.278.camel@cashmere.sps.mot.com>
On Jun 8, 2006, at 4:57 PM, Jon Loeliger wrote:
>
> Signed-off-by: Xianghua Xiao <x.xiao@freescale.com>
> Signed-off-by: Wei Zhang <Wei.Zhang@freescale.com>
> Signed-off-by: Jon Loeliger <jdl@freescale.com>
>
> ---
>
> arch/powerpc/platforms/86xx/misc.c | 51 +++++
> arch/powerpc/platforms/86xx/mpc8641_hpcn.c | 52 +++++
> arch/powerpc/platforms/86xx/mpc8641_hpcn.h | 54 +++++
> arch/powerpc/platforms/86xx/mpc86xx.h | 31 +++
> arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 304 +++++++++++++++++
> +++++++++++
> 5 files changed, 492 insertions(+), 0 deletions(-)
>
>
> diff --git a/arch/powerpc/platforms/86xx/misc.c b/arch/powerpc/
> platforms/86xx/misc.c
> new file mode 100644
> index 0000000..01c5e9b
> --- /dev/null
> +++ b/arch/powerpc/platforms/86xx/misc.c
> @@ -0,0 +1,51 @@
> +/*
> + * MPC86XX generic code
> + *
> + * Author: Xianghua Xiao <x.xiao@freescale.com>
> + *
> + * Copyright 2006 Freescale Semiconductor Inc.
> + *
> + * This program is free software; you can redistribute it and/or
> modify it
> + * under the terms of the GNU General Public License as
> published by the
> + * Free Software Foundation; either version 2 of the License, or
> (at your
> + * option) any later version.
> + */
> +
> +#include <linux/irq.h>
> +#include <linux/module.h>
> +#include <asm/irq.h>
> +#include <asm/io.h>
> +
> +#include <sysdev/fsl_soc.h>
> +
> +void
> +mpc86xx_restart(char *cmd)
> +{
> + void __iomem *rstcr;
> +
> + local_irq_disable();
> +
> + /* Assert reset request to Reset Control Register */
> + rstcr = ioremap(get_immrbase() + MPC86XX_RSTCR_OFFSET, 0x100);
> + out_be32(rstcr, 0x2);
> +
> + /* not reached */
> +}
> +
> +
> +long __init
> +mpc86xx_time_init(void)
> +{
> + unsigned int temp;
> +
> + /* Set the time base to zero */
> + mtspr(SPRN_TBWL, 0);
> + mtspr(SPRN_TBWU, 0);
> +
> + temp = mfspr(SPRN_HID0);
> + temp |= HID0_TBEN;
> + mtspr(SPRN_HID0, temp);
> + asm volatile("isync");
> +
> + return 0;
> +}
> diff --git a/arch/powerpc/platforms/86xx/mpc8641_hpcn.c b/arch/
> powerpc/platforms/86xx/mpc8641_hpcn.c
> new file mode 100644
> index 0000000..655e2b8
> --- /dev/null
> +++ b/arch/powerpc/platforms/86xx/mpc8641_hpcn.c
> @@ -0,0 +1,52 @@
how about renaming this smp.c and make it for config'd generic on
86xx & SMP
> +/*
> + * MPC8641 HPCN board specific routines
> + *
> + * Author: Xianghua Xiao <x.xiao@freescale.com>
> + *
> + * Copyright 2006 Freescale Semiconductor Inc.
> + *
> + * This program is free software; you can redistribute it and/or
> modify it
> + * under the terms of the GNU General Public License as
> published by the
> + * Free Software Foundation; either version 2 of the License, or
> (at your
> + * option) any later version.
> + */
> +
> +#include <linux/config.h>
> +#include <linux/stddef.h>
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +
> +#include <asm/pgtable.h>
> +#include <asm/page.h>
> +#include <asm/pci-bridge.h>
> +#include <asm-powerpc/mpic.h>
> +#include <asm/mpc86xx.h>
> +
> +#include "mpc86xx.h"
> +
> +
> +#ifdef CONFIG_SMP
> +static void __init
> +smp_8641_kick_cpu(int nr)
> +{
> + *(unsigned long *)KERNELBASE = nr;
> + asm volatile("dcbf 0,%0"::"r"(KERNELBASE):"memory");
> + printk("CPU%d released, waiting\n",nr);
> +}
> +
> +static void __init
> +smp_8641_setup_cpu(int cpu_nr)
> +{
> + mpic_setup_this_cpu();
> +}
> +
> +
> +struct smp_ops_t smp_8641_ops = {
> + .message_pass = smp_mpic_message_pass,
> + .probe = smp_mpic_probe,
> + .kick_cpu = smp_8641_kick_cpu,
> + .setup_cpu = smp_8641_setup_cpu,
> + .take_timebase = smp_generic_take_timebase,
> + .give_timebase = smp_generic_give_timebase,
> +};
> +#endif /* CONFIG_SMP */
> diff --git a/arch/powerpc/platforms/86xx/mpc8641_hpcn.h b/arch/
> powerpc/platforms/86xx/mpc8641_hpcn.h
> new file mode 100644
> index 0000000..4ba5b4c
> --- /dev/null
> +++ b/arch/powerpc/platforms/86xx/mpc8641_hpcn.h
> @@ -0,0 +1,54 @@
> +/*
> + * MPC8641 HPCN board definitions
> + *
> + * Copyright 2006 Freescale Semiconductor Inc.
> + *
> + * This program is free software; you can redistribute it and/or
> modify it
> + * under the terms of the GNU General Public License as
> published by the
> + * Free Software Foundation; either version 2 of the License, or
> (at your
> + * option) any later version.
> + *
> + * Author: Xianghua Xiao <x.xiao@freescale.com>
> + */
> +
> +#ifndef __MPC8641_HPCN_H__
> +#define __MPC8641_HPCN_H__
> +
> +#include <linux/config.h>
> +#include <linux/init.h>
> +
> +/* PCI interrupt controller */
> +#define PIRQA 3
> +#define PIRQB 4
> +#define PIRQC 5
> +#define PIRQD 6
> +#define PIRQ7 7
> +#define PIRQE 9
> +#define PIRQF 10
> +#define PIRQG 11
> +#define PIRQH 12
> +
> +/* PEX memory map */
> +#define MPC86XX_PEX_LOWER_IO 0x00000000
> +#define MPC86XX_PEX_UPPER_IO 0x00ffffff
> +
> +#define MPC86XX_PEX_LOWER_MEM 0x80000000
> +#define MPC86XX_PEX_UPPER_MEM 0x9fffffff
> +
> +#define MPC86XX_PEX_IO_BASE 0xe2000000
> +#define MPC86XX_PEX_MEM_OFFSET 0x00000000
> +
> +#define MPC86XX_PEX_IO_SIZE 0x01000000
> +
PEX offsets are generic and should be moved to such a more generic
86xx location.
> +#define PEX1_CFG_ADDR_OFFSET (0x8000)
> +#define PEX1_CFG_DATA_OFFSET (0x8004)
> +
> +#define PEX2_CFG_ADDR_OFFSET (0x9000)
> +#define PEX2_CFG_DATA_OFFSET (0x9004)
> +
> +#define MPC86xx_PEX_OFFSET PEX1_CFG_ADDR_OFFSET
> +#define MPC86xx_PEX_SIZE (0x1000)
> +
this also seems 86xx & not hpcn specific.
> +#define MPC86XX_RSTCR_OFFSET (0xe00b0) /* Reset Control Register */
> +
> +#endif /* __MPC8641_HPCN_H__ */
> diff --git a/arch/powerpc/platforms/86xx/mpc86xx.h b/arch/powerpc/
> platforms/86xx/mpc86xx.h
> new file mode 100644
> index 0000000..7cc45d4
> --- /dev/null
> +++ b/arch/powerpc/platforms/86xx/mpc86xx.h
> @@ -0,0 +1,31 @@
> +/*
> + * Copyright 2006 Freescale Semiconductor Inc.
> + *
> + * This program is free software; you can redistribute it and/or
> modify it
> + * under the terms of the GNU General Public License as
> published by the
> + * Free Software Foundation; either version 2 of the License, or
> (at your
> + * option) any later version.
> + */
> +
> +#ifndef __MPC86XX_H__
> +#define __MPC86XX_H__
> +
> +/*
> + * Declaration for the various functions exported by the
> + * mpc86xx_* files. Mostly for use by mpc86xx_setup().
> + */
> +
> +extern void mpc86xx_restart(char *cmd);
> +extern long __init mpc86xx_time_init(void);
> +
> +extern int __init add_bridge(struct device_node *dev);
> +
> +extern void __init setup_indirect_pex(struct pci_controller* hose,
> + u32 cfg_addr, u32 cfg_data);
> +extern void __init setup_indirect_pex_nomap(struct pci_controller*
> hose,
> + void __iomem * cfg_addr,
> + void __iomem * cfg_data);
> +
> +extern struct smp_ops_t smp_8641_ops;
> +
> +#endif /* __MPC86XX_H__ */
> diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/
> powerpc/platforms/86xx/mpc86xx_hpcn.c
> new file mode 100644
> index 0000000..d413e95
> --- /dev/null
> +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
> @@ -0,0 +1,304 @@
> +/*
> + * MPC86xx HPCN board specific routines
> + *
> + * Recode: ZHANG WEI <wei.zhang@freescale.com>
> + * Initial author: Xianghua Xiao <x.xiao@freescale.com>
> + *
> + * Copyright 2006 Freescale Semiconductor Inc.
> + *
> + * This program is free software; you can redistribute it and/or
> modify it
> + * under the terms of the GNU General Public License as
> published by the
> + * Free Software Foundation; either version 2 of the License, or
> (at your
> + * option) any later version.
> + */
> +
> +#include <linux/config.h>
> +#include <linux/stddef.h>
> +#include <linux/kernel.h>
> +#include <linux/pci.h>
> +#include <linux/kdev_t.h>
> +#include <linux/delay.h>
> +#include <linux/seq_file.h>
> +#include <linux/root_dev.h>
> +
> +#include <asm/system.h>
> +#include <asm/time.h>
> +#include <asm/machdep.h>
> +#include <asm/pci-bridge.h>
> +#include <asm/mpc86xx.h>
> +#include <asm/prom.h>
> +#include <mm/mmu_decl.h>
> +#include <asm/udbg.h>
> +#include <asm/i8259.h>
> +
> +#include <asm/mpic.h>
> +
> +#include <sysdev/fsl_soc.h>
> +
> +#include "mpc86xx.h"
> +
> +#ifndef CONFIG_PCI
> +unsigned long isa_io_base = 0;
> +unsigned long isa_mem_base = 0;
> +unsigned long pci_dram_offset = 0;
> +#endif
> +
> +
> +/*
> + * Internal interrupts are all Level Sensitive, and Positive Polarity
> + */
> +
> +static u_char mpc86xx_hpcn_openpic_initsenses[] __initdata = {
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 0:
> Reserved */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 1: MCM */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 2: DDR
> DRAM */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 3: LBIU */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 4: DMA 0 */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 5: DMA 1 */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 6: DMA 2 */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 7: DMA 3 */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 8: PEX1 */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 9: PEX2 */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 10:
> Reserved */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 11:
> Reserved */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 12: DUART2 */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 13: TSEC 1
> Transmit */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 14: TSEC 1
> Receive */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 15: TSEC 3
> transmit */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 16: TSEC 3
> receive */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 17: TSEC 3
> error */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 18: TSEC 1
> Receive/Transmit Error */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 19: TSEC 2
> Transmit */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 20: TSEC 2
> Receive */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 21: TSEC 4
> transmit */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 22: TSEC 4
> receive */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 23: TSEC 4
> error */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 24: TSEC 2
> Receive/Transmit Error */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 25: Unused */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 26: DUART1 */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 27: I2C */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 28:
> Performance Monitor */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 29: Unused */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 30: Unused */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 31: Unused */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 32: SRIO
> error/write-port unit */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 33: SRIO
> outbound doorbell */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 34: SRIO
> inbound doorbell */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 35: Unused */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 36: Unused */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 37: SRIO
> outbound message unit 1 */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 38: SRIO
> inbound message unit 1 */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 39: SRIO
> outbound message unit 2 */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 40: SRIO
> inbound message unit 2 */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 41: Unused */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 42: Unused */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 43: Unused */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 44: Unused */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 45: Unused */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 46: Unused */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 47: Unused */
> + 0x0, /* External 0: */
> + 0x0, /* External 1: */
> + 0x0, /* External 2: */
> + 0x0, /* External 3: */
> + 0x0, /* External 4: */
> + 0x0, /* External 5: */
> + 0x0, /* External 6: */
> + 0x0, /* External 7: */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 8: Pixis
> FPGA */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* External 9: ULI
> 8259 INTR Cascade */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 10: Quad
> ETH PHY */
> + 0x0, /* External 11: */
> + 0x0,
> + 0x0,
> + 0x0,
> + 0x0,
> +};
> +
> +
> +void __init
> +mpc86xx_hpcn_init_IRQ(void)
> +{
> + struct mpic *mpic1;
> + phys_addr_t OpenPIC_PAddr;
> +
> + /* Determine the Physical Address of the OpenPIC regs */
> + OpenPIC_PAddr = get_immrbase() + MPC86xx_OPENPIC_OFFSET;
> +
> + /* Alloc mpic structure and per isu has 16 INT entries. */
> + mpic1 = mpic_alloc(OpenPIC_PAddr,
> + MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
> + 16, MPC86xx_OPENPIC_IRQ_OFFSET, 0, 250,
> + mpc86xx_hpcn_openpic_initsenses,
> + sizeof(mpc86xx_hpcn_openpic_initsenses),
> + " MPIC ");
> + BUG_ON(mpic1 == NULL);
> +
> + /* 48 Internal Interrupts */
> + mpic_assign_isu(mpic1, 0, OpenPIC_PAddr + 0x10200);
> + mpic_assign_isu(mpic1, 1, OpenPIC_PAddr + 0x10400);
> + mpic_assign_isu(mpic1, 2, OpenPIC_PAddr + 0x10600);
> +
> + /* 16 External interrupts */
> + mpic_assign_isu(mpic1, 3, OpenPIC_PAddr + 0x10000);
> +
> + mpic_init(mpic1);
> +
> +#ifdef CONFIG_PEX
> + mpic_setup_cascade(MPC86xx_IRQ_EXT9, i8259_irq_cascade, NULL);
> + i8259_init(0, I8259_OFFSET);
> +#endif
> +}
> +
> +
> +
> +#ifdef CONFIG_PCI
> +/*
> + * interrupt routing
> + */
> +
> +int
> +mpc86xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned
> char pin)
> +{
> + static char pci_irq_table[][4] = {
> + /*
> + * PCI IDSEL/INTPIN->INTLINE
> + * A B C D
> + */
> + {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 17 -- PCI Slot 1 */
> + {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 18 -- PCI Slot 2 */
> + {0, 0, 0, 0}, /* IDSEL 19 */
> + {0, 0, 0, 0}, /* IDSEL 20 */
> + {0, 0, 0, 0}, /* IDSEL 21 */
> + {0, 0, 0, 0}, /* IDSEL 22 */
> + {0, 0, 0, 0}, /* IDSEL 23 */
> + {0, 0, 0, 0}, /* IDSEL 24 */
> + {0, 0, 0, 0}, /* IDSEL 25 */
> + {0, 0, 0, 0}, /* IDSEL 26 */
> + {PIRQC, 0, 0, 0}, /* IDSEL 27 -- LAN */
> + {PIRQE, PIRQF, PIRQH, PIRQ7}, /* IDSEL 28 -- USB 1.1 */
> + {PIRQE, PIRQF, PIRQG, 0}, /* IDSEL 29 -- Audio & Modem */
> + {PIRQH, 0, 0, 0}, /* IDSEL 30 -- LPC & PMU*/
> + {PIRQD, 0, 0, 0}, /* IDSEL 31 -- ATA */
> + };
> +
> + const long min_idsel = 17, max_idsel = 31, irqs_per_slot = 4;
> + return PCI_IRQ_TABLE_LOOKUP + I8259_OFFSET;
> +}
> +
> +
> +int
> +mpc86xx_exclude_device(u_char bus, u_char devfn)
> +{
> +#if !defined(CONFIG_PEX)
> + if (bus == 0 && PCI_SLOT(devfn) == 0)
> + return PCIBIOS_DEVICE_NOT_FOUND;
> +#endif
> +
> + return PCIBIOS_SUCCESSFUL;
> +}
> +#endif /* CONFIG_PCI */
> +
> +
> +static void __init
> +mpc86xx_hpcn_setup_arch(void)
> +{
> + struct device_node *np;
> +
> +#ifdef CONFIG_SMP
> + phys_addr_t mcm_paddr;
> + void *mcm_vaddr = NULL;
> + unsigned long vaddr;
> +#endif
> +
> + if (ppc_md.progress)
> + ppc_md.progress("mpc86xx_hpcn_setup_arch()", 0);
> +
> + np = of_find_node_by_type(NULL, "cpu");
> + if (np != 0) {
> + unsigned int *fp;
> +
> + fp = (int *)get_property(np, "clock-frequency", NULL);
> + if (fp != 0)
> + loops_per_jiffy = *fp / HZ;
> + else
> + loops_per_jiffy = 50000000 / HZ;
> + of_node_put(np);
> + }
> +
> +#ifdef CONFIG_PEX
> + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
> + add_bridge(np);
> +
> + ppc_md.pci_swizzle = common_swizzle;
> + ppc_md.pci_map_irq = mpc86xx_map_irq;
> + ppc_md.pci_exclude_device = mpc86xx_exclude_device;
> +#endif
> +
> + printk("HPCN board with 86xx from Freescale Semiconductor\n");
> +
> +#ifdef CONFIG_ROOT_NFS
> + ROOT_DEV = Root_NFS;
> +#else
> + ROOT_DEV = Root_HDA1;
> +#endif
> +
> +#ifdef CONFIG_SMP
> + /* Release Core 1 in boot holdoff */
> + mcm_paddr = get_immrbase() + MPC86xx_MCM_OFFSET;
> + mcm_vaddr = ioremap(mcm_paddr, MPC86xx_MCM_SIZE);
> +
> + vaddr = (unsigned long)mcm_vaddr + MCM_PORT_CONFIG_OFFSET;
> + out_be32((volatile unsigned *)vaddr, CPU_ALL_RELEASED);
uugh, clean this up.
> + smp_ops = &smp_8641_ops;
> +#endif
> +}
> +
> +
> +void
> +mpc86xx_hpcn_show_cpuinfo(struct seq_file *m)
> +{
> + uint pvid, svid, phid1;
> + uint memsize = total_memory;
> +
> + pvid = mfspr(SPRN_PVR);
> + svid = mfspr(SPRN_SVR);
> +
> + seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
> + seq_printf(m, "Machine\t\t: MPC86xx HPCN Board\n");
> + seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
> + seq_printf(m, "SVR\t\t: 0x%x\n", svid);
> +
> + /* Display cpu Pll setting */
> + phid1 = mfspr(SPRN_HID1);
> + seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
> +
> + /* Display the amount of memory */
> + seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
What does 'cat /proc/cpuinfo' look like?
> +}
> +
> +/*
> + * Called very early, device-tree isn't unflattened
> + */
> +static int __init mpc86xx_hpcn_probe(void)
> +{
> + unsigned long root = of_get_flat_dt_root();
> +
> + if (of_flat_dt_is_compatible(root, "mpc86xx"))
> + return 1; /* Looks good */
> +
> + return 0;
> +}
> +
> +define_machine(mpc86xx_hpcn) {
> + .name = "MPC86xx HPCN",
> + .probe = mpc86xx_hpcn_probe,
> + .setup_arch = mpc86xx_hpcn_setup_arch,
> + .init_IRQ = mpc86xx_hpcn_init_IRQ,
> + .show_cpuinfo = mpc86xx_hpcn_show_cpuinfo,
> + .get_irq = mpic_get_irq,
> + .restart = mpc86xx_restart,
> + .time_init = mpc86xx_time_init,
> + .calibrate_decr = generic_calibrate_decr,
> + .progress = udbg_progress,
> +};
>
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
^ permalink raw reply
* Help -- failed to boot up kernel on PPC40 5
From: Denny @ 2006-06-09 2:11 UTC (permalink / raw)
To: wolfgang denk; +Cc: linuxppc-embedded
In-Reply-To: <20060608214239.A71EE35265D@atlas.denx.de>
[-- Attachment #1: Type: text/plain, Size: 2640 bytes --]
Dear Denk,
I use the linux 2.6.14 of your website, and compile it with the ELDK4.0 succesfully, but when I download it to my PPC405 board, it stopped after initialized the MMU, and encounter an exception in "_start_here".
Logs:
u-boot => tftpboot 0x6000000 uImage
miiphy_register: non unique device name 'ppc_4xx_eth0'
ENET Speed is 100 Mbps - FULL duplex connection
TFTP from server 192.168.65.235; our IP address is 192.168.65.239
Filename 'uImage'.
Load address: 0x6000000
Loading: #################################################################
#####################################
done
Bytes transferred = 521637 (7f5a5 hex)
u-boot => bootm 0x6000000
## Booting image at 0x06000000 ...
Image Name: Linux-2.6.14
Created: 2006-06-09 1:00:37 UTC
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 521573 Bytes = 509.3 kB
Load Address: 0x00100000
Entry Point: 0x00100000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Now starting to boot the kernel...
## Current stack ends at 0x07F81A90 => set upper limit to 0x00800000
## cmdline at 0x007FFF00 ... 0x007FFF00
memstart = 0x00000000
memsize = 0x08000000
flashstart = 0xFFFA0000
flashsize = 0x01080000
flashoffset = 0x00029300
sramstart = 0x00000000
sramsize = 0x00000000
bootflags = 0x0000A000
procfreq = 200 MHz
plb_busfreq = 100 MHz
pci_busfreq = 33.333 MHz
ethaddr = 00:01:02:54:12:47
IP addr = 192.168.65.239
baudrate = 9600 bps
Ramdisk image not found, no initrd!
## Transferring control to Linux (at address 0x00100000) ...
booting kernel with FLAT_TREE...
NIP: C000221C XER: 20000000 LR: 00100018 REGS: 07f819a0 TRAP: 0700 DAR: 07FC31D0
MSR: 00021030 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
GPR00: C0002218 07F81A90 00000000 C00003C0 C0000000 00000000 007FFF00 007FFF00
GPR08: 07FAB560 0BEBC200 00000000 00000000 20BDE736 00000000 07FD0D00 007FFF00
GPR16: 00100000 07FCF70C FFFFFFFF 00000000 00800000 007FFF00 07FCAE20 00000002
GPR24: 07F81B50 007FFE70 00780000 007FFF00 007FFF00 00000000 00000000 007FFE70
** Illegal Instruction **
Call backtrace:
Program Check Exception
U-Boot 1.1.4 (Jun 9 2006 - 09:36:28)
...
...
My objdump file is as the following:
...
c0002208: 7c 00 04 ac sync
c000220c: 4c 00 00 64 rfi
c0002210: 48 00 00 00 b c0002210 <finish_tlb_load+0x48>
c0002214 <giveup_fpu>:
c0002214: 4e 80 00 20 blr
c0002218 <start_here>:
c0002218: 3c 40 c0 0f lis r2,-16369
c000221c: 60 42 17 60 ori r2,r2,5984
c0002220: 3c 82 40 00 addis r4,r2,16384
c0002224: 38 84 01 c8 addi r4,r4,456
...
Best Regards!
- Denny
[-- Attachment #2: Type: text/html, Size: 4128 bytes --]
^ permalink raw reply
* RE: does Gianfar Ethernet Controller Version 1.1 support MARVELL 88E1111?
From: Liu Dave-r63238 @ 2006-06-09 3:35 UTC (permalink / raw)
To: Fleming Andy-afleming, Guo Jaffe; +Cc: Linuxppc-embedded
> On Jun 8, 2006, at 12:51, Guo Jaffe wrote:
>
> > Hi Andy,
> >
> > Thank you for your information. So the driver is not the issue, but
> > better to upgraded.
> >
> > I will check the board once more. The PHY doesn't work because the
> > 8bit bus between MAC and PHY is locked(TX_EN and RX_DV all
> disabled
> > from the scope's view) and also you can't see any signals exist at
> > the Magnetic side(nor LED signals). It seems that only
> MDC/MDIO and
> > CLOCK reference pin works. The PHY's ID must be read from MDC/MDIO
> > interface and Clocks are right showed on the scope.
>
>
> But what error are you getting? What are the symptoms of your
> problem? The GMII interface (the 8-bit bus) is inconsequential to
> PHY configuration and management. Only the MDC/MDIO bus is used.
> Therefore the PHY id should be quite readable. What version
> of Linux
> are you using? Please describe what the kernel prints out when you
> boot, and when you try to bring up the interface (assuming you don't
> do that at boot).
>
> Andy
As you said, the MDIO bus looks like well. If the PHY address it is right,
You can read the PHY ID from PHY. What is the PHY ID you read?
Please check the hardware status
1) 8540 hardware reset configuration for GMII interface;
Make sure it is GMII interface.
2) MARVELL 88E1111 configuration and GMII interface connection.
You can reference the 8540 ref board.
3)TSEC and PHY power
4)The 125M reference clock---GTX_CLK125, This looks
well as you said.
5)The GTX_CLK for GMII transmit clock, and TX_CLK for MII transmit clock.
What speed ethernet does the TSEC connect to? 1000Mbps or 100Mbps?
6) The RX_CLK for receive clock.
7)Of cause, need check the RX_DV and TX_EN to see if have some traffic.
-Dave
^ permalink raw reply
* Re: [PATCH 2/10 v2] Add the MPC8641 HPCN platform files.
From: Benjamin Herrenschmidt @ 2006-06-09 4:15 UTC (permalink / raw)
To: Jon Loeliger; +Cc: linuxppc-dev@ozlabs.org
In-Reply-To: <1149803821.23938.278.camel@cashmere.sps.mot.com>
On Thu, 2006-06-08 at 16:57 -0500, Jon Loeliger wrote:
> +void
> +mpc86xx_restart(char *cmd)
> +{
> + void __iomem *rstcr;
> +
> + local_irq_disable();
> +
> + /* Assert reset request to Reset Control Register */
> + rstcr = ioremap(get_immrbase() + MPC86XX_RSTCR_OFFSET, 0x100);
> + out_be32(rstcr, 0x2);
> +
> + /* not reached */
> +}
ioremap with irq disabled isn't great.... You should do the ioremap
once at boot.
> +long __init
> +mpc86xx_time_init(void)
> +{
> + unsigned int temp;
> +
> + /* Set the time base to zero */
> + mtspr(SPRN_TBWL, 0);
> + mtspr(SPRN_TBWU, 0);
> +
> + temp = mfspr(SPRN_HID0);
> + temp |= HID0_TBEN;
> + mtspr(SPRN_HID0, temp);
> + asm volatile("isync");
> +
> + return 0;
> +}
Overall, that file is too small :) Move those into your setup.c and make
those static... Also time_init() is too late to enable the timebase
imho. You should have it enabled as soon as possible, possibly as soon
as the cpu setup gets run (though you don't have to initialize it to 0)
> +#ifdef CONFIG_SMP
> +static void __init
> +smp_8641_kick_cpu(int nr)
> +{
> + *(unsigned long *)KERNELBASE = nr;
> + asm volatile("dcbf 0,%0"::"r"(KERNELBASE):"memory");
> + printk("CPU%d released, waiting\n",nr);
> +}
> +
> +static void __init
> +smp_8641_setup_cpu(int cpu_nr)
> +{
> + mpic_setup_this_cpu();
> +}
> +
> +
> +struct smp_ops_t smp_8641_ops = {
> + .message_pass = smp_mpic_message_pass,
> + .probe = smp_mpic_probe,
> + .kick_cpu = smp_8641_kick_cpu,
> + .setup_cpu = smp_8641_setup_cpu,
> + .take_timebase = smp_generic_take_timebase,
> + .give_timebase = smp_generic_give_timebase,
> +};
> +#endif /* CONFIG_SMP */
This file could/should be called *_smp.c and not need #ifdef's :)
> diff --git a/arch/powerpc/platforms/86xx/mpc8641_hpcn.h b/arch/powerpc/platforms/86xx/mpc8641_hpcn.h
> new file mode 100644
> index 0000000..4ba5b4c
> --- /dev/null
> +++ b/arch/powerpc/platforms/86xx/mpc8641_hpcn.h
> @@ -0,0 +1,54 @@
> +/*
> + * MPC8641 HPCN board definitions
> + *
> + * Copyright 2006 Freescale Semiconductor Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + *
> + * Author: Xianghua Xiao <x.xiao@freescale.com>
> + */
> +
> +#ifndef __MPC8641_HPCN_H__
> +#define __MPC8641_HPCN_H__
> +
> +#include <linux/config.h>
> +#include <linux/init.h>
> +
> +/* PCI interrupt controller */
> +#define PIRQA 3
> +#define PIRQB 4
> +#define PIRQC 5
> +#define PIRQD 6
> +#define PIRQ7 7
> +#define PIRQE 9
> +#define PIRQF 10
> +#define PIRQG 11
> +#define PIRQH 12
> +
> +/* PEX memory map */
> +#define MPC86XX_PEX_LOWER_IO 0x00000000
> +#define MPC86XX_PEX_UPPER_IO 0x00ffffff
> +
> +#define MPC86XX_PEX_LOWER_MEM 0x80000000
> +#define MPC86XX_PEX_UPPER_MEM 0x9fffffff
> +
> +#define MPC86XX_PEX_IO_BASE 0xe2000000
> +#define MPC86XX_PEX_MEM_OFFSET 0x00000000
> +
> +#define MPC86XX_PEX_IO_SIZE 0x01000000
> +
> +#define PEX1_CFG_ADDR_OFFSET (0x8000)
> +#define PEX1_CFG_DATA_OFFSET (0x8004)
> +
> +#define PEX2_CFG_ADDR_OFFSET (0x9000)
> +#define PEX2_CFG_DATA_OFFSET (0x9004)
> +
> +#define MPC86xx_PEX_OFFSET PEX1_CFG_ADDR_OFFSET
> +#define MPC86xx_PEX_SIZE (0x1000)
> +
> +#define MPC86XX_RSTCR_OFFSET (0xe00b0) /* Reset Control Register */
Most of the values above should probably be retreived from the
device-tree.
> +#endif /* __MPC8641_HPCN_H__ */
> diff --git a/arch/powerpc/platforms/86xx/mpc86xx.h b/arch/powerpc/platforms/86xx/mpc86xx.h
> new file mode 100644
> index 0000000..7cc45d4
> --- /dev/null
> +++ b/arch/powerpc/platforms/86xx/mpc86xx.h
> @@ -0,0 +1,31 @@
> +/*
> + * Copyright 2006 Freescale Semiconductor Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#ifndef __MPC86XX_H__
> +#define __MPC86XX_H__
> +
> +/*
> + * Declaration for the various functions exported by the
> + * mpc86xx_* files. Mostly for use by mpc86xx_setup().
> + */
> +
> +extern void mpc86xx_restart(char *cmd);
> +extern long __init mpc86xx_time_init(void);
As I suggested before, the 2 above should be static in your setup file.
> +extern int __init add_bridge(struct device_node *dev);
Aren't we exposing that already via some header ?
> +extern void __init setup_indirect_pex(struct pci_controller* hose,
> + u32 cfg_addr, u32 cfg_data);
> +extern void __init setup_indirect_pex_nomap(struct pci_controller* hose,
> + void __iomem * cfg_addr,
> + void __iomem * cfg_data);
> +
> +extern struct smp_ops_t smp_8641_ops;
See my comments about the PCI stuff with the PCI patch.
> +#endif /* __MPC86XX_H__ */
> diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
> new file mode 100644
> index 0000000..d413e95
> --- /dev/null
> +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
> @@ -0,0 +1,304 @@
> +/*
> + * MPC86xx HPCN board specific routines
> + *
> + * Recode: ZHANG WEI <wei.zhang@freescale.com>
> + * Initial author: Xianghua Xiao <x.xiao@freescale.com>
> + *
> + * Copyright 2006 Freescale Semiconductor Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/config.h>
> +#include <linux/stddef.h>
> +#include <linux/kernel.h>
> +#include <linux/pci.h>
> +#include <linux/kdev_t.h>
> +#include <linux/delay.h>
> +#include <linux/seq_file.h>
> +#include <linux/root_dev.h>
> +
> +#include <asm/system.h>
> +#include <asm/time.h>
> +#include <asm/machdep.h>
> +#include <asm/pci-bridge.h>
> +#include <asm/mpc86xx.h>
> +#include <asm/prom.h>
> +#include <mm/mmu_decl.h>
> +#include <asm/udbg.h>
> +#include <asm/i8259.h>
> +
> +#include <asm/mpic.h>
> +
> +#include <sysdev/fsl_soc.h>
> +
> +#include "mpc86xx.h"
> +
> +#ifndef CONFIG_PCI
> +unsigned long isa_io_base = 0;
> +unsigned long isa_mem_base = 0;
> +unsigned long pci_dram_offset = 0;
> +#endif
> +
> +
> +/*
> + * Internal interrupts are all Level Sensitive, and Positive Polarity
> + */
> +
> +static u_char mpc86xx_hpcn_openpic_initsenses[] __initdata = {
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 0: Reserved */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 1: MCM */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 2: DDR DRAM */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 3: LBIU */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 4: DMA 0 */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 5: DMA 1 */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 6: DMA 2 */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 7: DMA 3 */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 8: PEX1 */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 9: PEX2 */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 10: Reserved */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 11: Reserved */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 12: DUART2 */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 13: TSEC 1 Transmit */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 14: TSEC 1 Receive */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 15: TSEC 3 transmit */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 16: TSEC 3 receive */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 17: TSEC 3 error */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 18: TSEC 1 Receive/Transmit Error */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 19: TSEC 2 Transmit */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 20: TSEC 2 Receive */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 21: TSEC 4 transmit */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 22: TSEC 4 receive */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 23: TSEC 4 error */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 24: TSEC 2 Receive/Transmit Error */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 25: Unused */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 26: DUART1 */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 27: I2C */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 28: Performance Monitor */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 29: Unused */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 30: Unused */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 31: Unused */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 32: SRIO error/write-port unit */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 33: SRIO outbound doorbell */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 34: SRIO inbound doorbell */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 35: Unused */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 36: Unused */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 37: SRIO outbound message unit 1 */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 38: SRIO inbound message unit 1 */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 39: SRIO outbound message unit 2 */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 40: SRIO inbound message unit 2 */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 41: Unused */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 42: Unused */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 43: Unused */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 44: Unused */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 45: Unused */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 46: Unused */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 47: Unused */
> + 0x0, /* External 0: */
> + 0x0, /* External 1: */
> + 0x0, /* External 2: */
> + 0x0, /* External 3: */
> + 0x0, /* External 4: */
> + 0x0, /* External 5: */
> + 0x0, /* External 6: */
> + 0x0, /* External 7: */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 8: Pixis FPGA */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* External 9: ULI 8259 INTR Cascade */
> + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 10: Quad ETH PHY */
> + 0x0, /* External 11: */
> + 0x0,
> + 0x0,
> + 0x0,
> + 0x0,
> +};
All of the above should of course come from the device-tree. 2.6.18 will
have the support for having interrupt routing from it without having
nodes for all devices. I'll post it to the list in a week or so, I'm
coding right now :)
> +void __init
> +mpc86xx_hpcn_init_IRQ(void)
> +{
> + struct mpic *mpic1;
> + phys_addr_t OpenPIC_PAddr;
> +
> + /* Determine the Physical Address of the OpenPIC regs */
> + OpenPIC_PAddr = get_immrbase() + MPC86xx_OPENPIC_OFFSET;
Do you really _need_ studly caps ? I know we did that before but you
don't have to copy ugly stuff :)
In general, you -need- a device node for the interrupt controller. It
will be made mandatory by the new code. You'll have to provide proper
interrupt informations in your device-tree (it's easy, really). Your
host PCI bridge shall have the interrupt-map for all the slots lines and
your on chip devices have proper interrupt routing info, and all shall
have your interrupt controller node as the interrupt parent.
If you get that right, it will be very easy to "just work" with my new
code.
> + /* Alloc mpic structure and per isu has 16 INT entries. */
> + mpic1 = mpic_alloc(OpenPIC_PAddr,
> + MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
> + 16, MPC86xx_OPENPIC_IRQ_OFFSET, 0, 250,
> + mpc86xx_hpcn_openpic_initsenses,
> + sizeof(mpc86xx_hpcn_openpic_initsenses),
> + " MPIC ");
> + BUG_ON(mpic1 == NULL);
> +
> + /* 48 Internal Interrupts */
> + mpic_assign_isu(mpic1, 0, OpenPIC_PAddr + 0x10200);
> + mpic_assign_isu(mpic1, 1, OpenPIC_PAddr + 0x10400);
> + mpic_assign_isu(mpic1, 2, OpenPIC_PAddr + 0x10600);
I haven't looked in detail at your memory map, but do you need separate
ISUs ? They seem to be quite close together to me... Also, you should
invent properties in the mpic node for some of those things, like
big-endian (like apple does) indicating it's a big endian openpic,
etc... If you manage to get close enough to spec & common usage, you
might not even need your own init function at all in the future.
> + /* 16 External interrupts */
> + mpic_assign_isu(mpic1, 3, OpenPIC_PAddr + 0x10000);
That looks like you used ISUs in order to "re-order" them... why ?
> + mpic_init(mpic1);
> +
> +#ifdef CONFIG_PEX
> + mpic_setup_cascade(MPC86xx_IRQ_EXT9, i8259_irq_cascade, NULL);
> + i8259_init(0, I8259_OFFSET);
> +#endif
> +}
Cascade handling is changing with my genirq port. It will be easy to
adapt though. Same comments howveer, you should have a device-tree node
for the 8259 (under an ISA bridge, those shall really be in the
device-tree). In general, on-board bridges should be in the device-tree,
only slots or standardly routed child PCI devices need not.
> +int
> +mpc86xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
> +{
> + static char pci_irq_table[][4] = {
> + /*
> + * PCI IDSEL/INTPIN->INTLINE
> + * A B C D
> + */
> + {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 17 -- PCI Slot 1 */
> + {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 18 -- PCI Slot 2 */
> + {0, 0, 0, 0}, /* IDSEL 19 */
> + {0, 0, 0, 0}, /* IDSEL 20 */
> + {0, 0, 0, 0}, /* IDSEL 21 */
> + {0, 0, 0, 0}, /* IDSEL 22 */
> + {0, 0, 0, 0}, /* IDSEL 23 */
> + {0, 0, 0, 0}, /* IDSEL 24 */
> + {0, 0, 0, 0}, /* IDSEL 25 */
> + {0, 0, 0, 0}, /* IDSEL 26 */
> + {PIRQC, 0, 0, 0}, /* IDSEL 27 -- LAN */
> + {PIRQE, PIRQF, PIRQH, PIRQ7}, /* IDSEL 28 -- USB 1.1 */
> + {PIRQE, PIRQF, PIRQG, 0}, /* IDSEL 29 -- Audio & Modem */
> + {PIRQH, 0, 0, 0}, /* IDSEL 30 -- LPC & PMU*/
> + {PIRQD, 0, 0, 0}, /* IDSEL 31 -- ATA */
> + };
> +
> + const long min_idsel = 17, max_idsel = 31, irqs_per_slot = 4;
> + return PCI_IRQ_TABLE_LOOKUP + I8259_OFFSET;
> +}
All of the above shall be in the device-tree.
> +
> +int
> +mpc86xx_exclude_device(u_char bus, u_char devfn)
> +{
> +#if !defined(CONFIG_PEX)
> + if (bus == 0 && PCI_SLOT(devfn) == 0)
> + return PCIBIOS_DEVICE_NOT_FOUND;
> +#endif
> +
> + return PCIBIOS_SUCCESSFUL;
> +}
> +#endif /* CONFIG_PCI */
Hrm... not sure I like that much but let's ignore it for now.
> +
> +static void __init
> +mpc86xx_hpcn_setup_arch(void)
> +{
> + struct device_node *np;
> +
> +#ifdef CONFIG_SMP
> + phys_addr_t mcm_paddr;
> + void *mcm_vaddr = NULL;
> + unsigned long vaddr;
> +#endif
> +
> + if (ppc_md.progress)
> + ppc_md.progress("mpc86xx_hpcn_setup_arch()", 0);
> +
> + np = of_find_node_by_type(NULL, "cpu");
> + if (np != 0) {
> + unsigned int *fp;
> +
> + fp = (int *)get_property(np, "clock-frequency", NULL);
> + if (fp != 0)
> + loops_per_jiffy = *fp / HZ;
> + else
> + loops_per_jiffy = 50000000 / HZ;
> + of_node_put(np);
> + }
The above looks dodgy... powerpc uses the timebase frequency for delays
anyway, lpj will be initialized by the bogomips code, and should but
unused mostly nowadays anyway.
> +#ifdef CONFIG_PEX
> + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
> + add_bridge(np);
> +
> + ppc_md.pci_swizzle = common_swizzle;
> + ppc_md.pci_map_irq = mpc86xx_map_irq;
> + ppc_md.pci_exclude_device = mpc86xx_exclude_device;
> +#endif
I'm not sure I like this CONFIG_PEX (in general). Just use CONFIG_PCI
for now all over the place. PCI-E has it's own binding that we don't
quite respect yet but will do and all of that will be in the
device-tree. However, as far as the kernel is concerned, this is all
under CONFIG_PCI.
> + printk("HPCN board with 86xx from Freescale Semiconductor\n");
> +
> +#ifdef CONFIG_ROOT_NFS
> + ROOT_DEV = Root_NFS;
> +#else
> + ROOT_DEV = Root_HDA1;
> +#endif
> +
> +#ifdef CONFIG_SMP
> + /* Release Core 1 in boot holdoff */
> + mcm_paddr = get_immrbase() + MPC86xx_MCM_OFFSET;
> + mcm_vaddr = ioremap(mcm_paddr, MPC86xx_MCM_SIZE);
> +
> + vaddr = (unsigned long)mcm_vaddr + MCM_PORT_CONFIG_OFFSET;
> + out_be32((volatile unsigned *)vaddr, CPU_ALL_RELEASED);
> + smp_ops = &smp_8641_ops;
> +#endif
> +}
Instead of ifdef's, just do a mpc86xx_smp_init() and put it somewhere
with the other SMP things in the file that contains them (and remove the
#ifdef's there too, just only build the file if CONFIG_SMP is set).
> +
> +void
> +mpc86xx_hpcn_show_cpuinfo(struct seq_file *m)
> +{
> + uint pvid, svid, phid1;
> + uint memsize = total_memory;
> +
> + pvid = mfspr(SPRN_PVR);
> + svid = mfspr(SPRN_SVR);
>
> + seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
> + seq_printf(m, "Machine\t\t: MPC86xx HPCN Board\n");
> + seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
> + seq_printf(m, "SVR\t\t: 0x%x\n", svid);
The PVR is probably a duplicate and the SVR should be added to per-cpu
info instead.
> + /* Display cpu Pll setting */
> + phid1 = mfspr(SPRN_HID1);
> + seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
> +
> + /* Display the amount of memory */
> + seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
> +}
> +
> +/*
> + * Called very early, device-tree isn't unflattened
> + */
> +static int __init mpc86xx_hpcn_probe(void)
> +{
> + unsigned long root = of_get_flat_dt_root();
> +
> + if (of_flat_dt_is_compatible(root, "mpc86xx"))
> + return 1; /* Looks good */
> +
> + return 0;
> +}
> +
> +define_machine(mpc86xx_hpcn) {
> + .name = "MPC86xx HPCN",
> + .probe = mpc86xx_hpcn_probe,
> + .setup_arch = mpc86xx_hpcn_setup_arch,
> + .init_IRQ = mpc86xx_hpcn_init_IRQ,
> + .show_cpuinfo = mpc86xx_hpcn_show_cpuinfo,
> + .get_irq = mpic_get_irq,
> + .restart = mpc86xx_restart,
> + .time_init = mpc86xx_time_init,
> + .calibrate_decr = generic_calibrate_decr,
> + .progress = udbg_progress,
> +};
>
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
^ permalink raw reply
* Re: [PATCH 4/10 v2] Guard L3CR references with CPU_FTR_L3CR.
From: Benjamin Herrenschmidt @ 2006-06-09 4:17 UTC (permalink / raw)
To: Jon Loeliger; +Cc: linuxppc-dev@ozlabs.org
In-Reply-To: <1149803912.23938.282.camel@cashmere.sps.mot.com>
On Thu, 2006-06-08 at 16:58 -0500, Jon Loeliger wrote:
> Signed-off-by: Jon Loeliger <jdl@freescale.com>
Beware about this one... the CPU setup code might run before the feature
fixup in the future... you should probably do a separate setup function
for your core or go read the feature bit directly in the structure
rather than relying on the fixup mecanism.
> ---
>
> arch/powerpc/kernel/cpu_setup_6xx.S | 2 ++
> 1 files changed, 2 insertions(+), 0 deletions(-)
>
>
> diff --git a/arch/powerpc/kernel/cpu_setup_6xx.S b/arch/powerpc/kernel/cpu_setup_6xx.S
> index 55ed771..365381f 100644
> --- a/arch/powerpc/kernel/cpu_setup_6xx.S
> +++ b/arch/powerpc/kernel/cpu_setup_6xx.S
> @@ -210,9 +210,11 @@ setup_745x_specifics:
> * the firmware. If any, we disable NAP capability as
> * it's known to be bogus on rev 2.1 and earlier
> */
> +BEGIN_FTR_SECTION
> mfspr r11,SPRN_L3CR
> andis. r11,r11,L3CR_L3E@h
> beq 1f
> +END_FTR_SECTION_IFSET(CPU_FTR_L3CR)
> lwz r6,CPU_SPEC_FEATURES(r5)
> andi. r0,r6,CPU_FTR_L3_DISABLE_NAP
> beq 1f
>
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
^ permalink raw reply
* Re: [PATCH 5/10 v2] Add 8641 CPU and i8259 Setup
From: Benjamin Herrenschmidt @ 2006-06-09 4:23 UTC (permalink / raw)
To: Jon Loeliger; +Cc: linuxppc-dev@ozlabs.org
In-Reply-To: <1149803956.23938.284.camel@cashmere.sps.mot.com>
> --- a/arch/powerpc/kernel/head_32.S
> +++ b/arch/powerpc/kernel/head_32.S
> @@ -224,6 +224,10 @@ turn_on_mmu:
> li r3,1 /* MTX only has 1 cpu */
> .globl __secondary_hold
> __secondary_hold:
> +#ifdef CONFIG_PPC_86xx
> + /* get the cpu id */
> + mfspr r3, SPRN_PIR
> +#endif
The above is wrong, it prevents using the same kernel image on another
platform. If you need a separate hold loop, then go for it but don't
change the existing one in a non-compatible way. Alternatively, you can
do like powermac, that is have several "entrypoints" to the same hold
loop providing different CPU IDs.
> /* tell the master we're here */
> stw r3,__secondary_hold_acknowledge@l(0)
> #ifdef CONFIG_SMP
> @@ -348,6 +352,16 @@ #define EXC_XFER_EE_LITE(n, hdlr) \
> #if defined(CONFIG_GEMINI) && defined(CONFIG_SMP)
> . = 0x100
> b __secondary_start_gemini
> +#endif
> +/* we need to ensure that the address translation is disabled */
> +#if defined(CONFIG_PPC_86xx) && defined(CONFIG_SMP)
> + . = 0x100
> + mfmsr r3
> + andi. r0, r3, (MSR_IR | MSR_DR)
> + andc r3, r3, r0
> + mtmsr r3
> + isync
> + b __secondary_hold
> #else
> EXCEPTION(0x100, Reset, unknown_exception, EXC_XFER_STD)
> #endif
Same comment above... #ifdef is bad. You are entering from 0x100 with
address translation not disabled ? How is that possible ? If it's your
firmware, then fix it :) If not possible, then have a real good
explanation why and how you end up in 0x100 that way. At worse, do like
pmac does and "patch" the 0x100 vector to point to some machine specific
code dynamically at runtime.
> @@ -1019,6 +1033,7 @@ #endif /* CONFIG_6xx */
> stw r0,0(r3)
>
> /* load up the MMU */
> + bl clear_bats
> bl load_up_mmu
Why do you need to call clear_bats here ? load_up_mmu should load BATs.
If it doesn't handle the high BATs, then fix it :)
> /* ptr to phys current thread */
> diff --git a/arch/powerpc/sysdev/i8259.c b/arch/powerpc/sysdev/i8259.c
> index b7ac32f..9b755e1 100644
> --- a/arch/powerpc/sysdev/i8259.c
> +++ b/arch/powerpc/sysdev/i8259.c
> @@ -201,6 +201,11 @@ void __init i8259_init(unsigned long int
> outb(0x0B, 0x20);
> outb(0x0B, 0xA0);
>
> +#ifdef CONFIG_I8259_LEVEL_TRIGGER
> + outb(0xfa, 0x4d0); /* level triggered */
> + outb(0xde, 0x4d1);
> +#endif
Another change that breaks multiplatform... Can you explain precisely
what you are trying to acheive here ? If necessary, we can add an
argument to i8259_init. Or you could do the above in your platform
code ... though I agree it would be a bit ugly :)
> /* Mask all interrupts */
> outb(cached_A1, 0xA1);
> outb(cached_21, 0x21);
^ permalink raw reply
* Re: [PATCH 3/10 v2] Add MPC8641 HPCN PCI and PCI-Express files.
From: Benjamin Herrenschmidt @ 2006-06-09 4:33 UTC (permalink / raw)
To: Jon Loeliger; +Cc: linuxppc-dev@ozlabs.org
In-Reply-To: <1149803866.23938.280.camel@cashmere.sps.mot.com>
On Thu, 2006-06-08 at 16:57 -0500, Jon Loeliger wrote:
> Signed-off-by: Xianghua Xiao <x.xiao@freescale.com>
> Signed-off-by: Wei Zhang <Wei.Zhang@freescale.com>
> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
> Signed-off-by: Jon Loeliger <jdl@freescale.com>
There are various things in this code that duplicate names used by other
platforms and thus makes the board unsuitable for use in a common
kernel. That needs to be fixed. Try avoiding too generic names. Also,
PCI Express shall be named "pcie" and not "pex" :)
I don't have time at the moment to go too deep in the details here.
Ben.
> ---
>
> arch/powerpc/platforms/86xx/pci.c | 213 +++++++++++++++++++++++++++++++++++++
> arch/powerpc/platforms/86xx/pex.c | 173 ++++++++++++++++++++++++++++++
> 2 files changed, 386 insertions(+), 0 deletions(-)
>
>
> diff --git a/arch/powerpc/platforms/86xx/pci.c b/arch/powerpc/platforms/86xx/pci.c
> new file mode 100644
> index 0000000..eff6f28
> --- /dev/null
> +++ b/arch/powerpc/platforms/86xx/pci.c
> @@ -0,0 +1,213 @@
> +/*
> + * MPC86XX pci setup code
> + *
> + * Recode: ZHANG WEI <wei.zhang@freescale.com>
> + * Initial author: Xianghua Xiao <x.xiao@freescale.com>
> + *
> + * Copyright 2006 Freescale Semiconductor Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/config.h>
> +#include <linux/types.h>
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/pci.h>
> +#include <linux/serial.h>
> +
> +#include <asm/system.h>
> +#include <asm/atomic.h>
> +#include <asm/io.h>
> +#include <asm/prom.h>
> +#include <asm/immap_86xx.h>
> +#include <asm/pci-bridge.h>
> +#include <sysdev/fsl_soc.h>
> +
> +#include "mpc86xx.h"
> +
> +
> +#ifdef CONFIG_PEX
> +static void __init
> +mpc86xx_setup_pex(struct pci_controller *hose)
> +{
> + volatile struct ccsr_pex *pex;
> + u16 cmd;
> + unsigned int temps;
> + phys_addr_t immr;
> +
> + immr = get_immrbase();
> +
> + pex = ioremap(immr + MPC86xx_PEX_OFFSET, MPC86xx_PEX_SIZE);
> +
> + early_read_config_word(hose, 0, 0, PCI_COMMAND, &cmd);
> + cmd |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY
> + | PCI_COMMAND_IO;
> + early_write_config_word(hose, 0, 0, PCI_COMMAND, cmd);
> +
> + early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80);
> +
> + /* PEX Bus, Fix the MPC8641D host bridge's location to bus 0xFF. */
> + early_read_config_dword(hose, 0, 0, PCI_PRIMARY_BUS, &temps);
> + temps = (temps & 0xff000000) | (0xff) | (0x0 << 8) | (0xfe << 16);
> + early_write_config_dword(hose, 0, 0, PCI_PRIMARY_BUS, temps);
> +
> + /* Disable all windows (except pexowar0 since its ignored) */
> + pex->pexowar1 = 0;
> + pex->pexowar2 = 0;
> + pex->pexowar3 = 0;
> + pex->pexowar4 = 0;
> + pex->pexiwar1 = 0;
> + pex->pexiwar2 = 0;
> + pex->pexiwar3 = 0;
> +
> + /* Setup Phys:PEX 1:1 outbound mem window @ MPC86XX_PEX_LOWER_MEM */
> + pex->pexotar1 = (MPC86XX_PEX_LOWER_MEM >> 12) & 0x000fffff;
> + pex->pexotear1 = 0x00000000;
> + pex->pexowbar1 = (MPC86XX_PEX_LOWER_MEM >> 12) & 0x000fffff;
> + /* Enable, Mem R/W */
> + pex->pexowar1 = 0x80044000 |
> + (__ilog2(MPC86XX_PEX_UPPER_MEM - MPC86XX_PEX_LOWER_MEM + 1) - 1);
> +
> + /* Setup outboud IO windows @ MPC86XX_PEX_IO_BASE */
> + pex->pexotar2 = (MPC86XX_PEX_LOWER_IO >> 12) & 0x000fffff;
> + pex->pexotear2 = 0x00000000;
> + pex->pexowbar2 = (MPC86XX_PEX_IO_BASE >> 12) & 0x000fffff;
> + /* Enable, IO R/W */
> + pex->pexowar2 = 0x80088000 | (__ilog2(MPC86XX_PEX_IO_SIZE) - 1);
> +
> + /* Setup 2G inbound Memory Window @ 0 */
> + pex->pexitar1 = 0x00000000;
> + pex->pexiwbar1 = 0x00000000;
> + /* Enable, Prefetch, Local Mem, Snoop R/W, 2G */
> + pex->pexiwar1 = 0xa0f5501e;
> +}
> +
> +int __init add_bridge(struct device_node *dev)
> +{
> + int len;
> + struct pci_controller *hose;
> + struct resource rsrc;
> + int *bus_range;
> + int has_address = 0;
> +
> + pr_debug("Adding PEX host bridge %s\n", dev->full_name);
> +
> + /* Fetch host bridge registers address */
> + has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
> +
> + /* Get bus range if any */
> + bus_range = (int *) get_property(dev, "bus-range", &len);
> + if (bus_range == NULL || len < 2 * sizeof(int))
> + printk(KERN_WARNING "Can't get bus-range for %s, assume"
> + " bus 0\n", dev->full_name);
> +
> + hose = pcibios_alloc_controller();
> + if (!hose)
> + return -ENOMEM;
> + hose->arch_data = dev;
> + hose->set_cfg_type = 1;
> +
> + /* last_busno = 0xfe cause by PEX bug */
> + hose->first_busno = bus_range ? bus_range[0] : 0x0;
> + hose->last_busno = bus_range ? bus_range[1] : 0xfe;
> +
> + setup_indirect_pex(hose, rsrc.start, rsrc.start + 0x4);
> +
> + /* Setup the first PEX controller. */
> + if ((rsrc.start & 0xfffff) == 0x8000)
> + mpc86xx_setup_pex(hose);
> +
> + printk(KERN_INFO "Found MPC86xx PEX host bridge at 0x%08lx. "
> + "Firmware bus number: %d->%d\n",
> + rsrc.start, hose->first_busno, hose->last_busno);
> +
> + pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
> + hose, hose->cfg_addr, hose->cfg_data);
> +
> + /* Interpret the "ranges" property */
> + /* This also maps the I/O region and sets isa_io/mem_base */
> + pci_process_bridge_OF_ranges(hose, dev, 1);
> +
> + return 0;
> +}
> +#endif /* CONFIG_PEX */
> +
> +static void __devinit quirk_ali1575(struct pci_dev *dev)
> +{
> + /*
> + * ALI1575 interrupts route table setup:
> + *
> + * IRQ pin IRQ#
> + * PIRQA ---- 3
> + * PIRQB ---- 4
> + * PIRQC ---- 5
> + * PIRQD ---- 6
> + * PIRQE ---- 9
> + * PIRQF ---- 10
> + * PIRQG ---- 11
> + * PIRQH ---- 12
> + *
> + * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD
> + * PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA
> + */
> + pci_write_config_dword(dev, 0x48, 0xb9317542);
> +
> + /* USB 1.1 OHCI controller 1, interrupt: PIRQE */
> + pci_write_config_byte(dev, 0x86, 0x0c);
> +
> + /* USB 1.1 OHCI controller 2, interrupt: PIRQF */
> + pci_write_config_byte(dev, 0x87, 0x0d);
> +
> + /* USB 1.1 OHCI controller 3, interrupt: PIRQH */
> + pci_write_config_byte(dev, 0x88, 0x0f);
> +
> + /* USB 2.0 controller, interrupt: PIRQ7 */
> + pci_write_config_byte(dev, 0x74, 0x06);
> +
> + /* Audio controller, interrupt: PIRQE */
> + pci_write_config_byte(dev, 0x8a, 0x0c);
> +
> + /* Modem controller, interrupt: PIRQF */
> + pci_write_config_byte(dev, 0x8b, 0x0d);
> +
> + /* HD audio controller, interrupt: PIRQG */
> + pci_write_config_byte(dev, 0x8c, 0x0e);
> +
> + /* Serial ATA interrupt: PIRQD */
> + pci_write_config_byte(dev, 0x8d, 0x0b);
> +
> + /* SMB interrupt: PIRQH */
> + pci_write_config_byte(dev, 0x8e, 0x0f);
> +
> + /* PMU ACPI SCI interrupt: PIRQH */
> + pci_write_config_byte(dev, 0x8f, 0x0f);
> +
> +}
> +
> +static void __devinit quirk_uli5288(struct pci_dev *dev)
> +{
> + unsigned char c;
> +
> + pci_read_config_byte(dev,0x83,&c);
> + c |= 0x80;
> + pci_write_config_byte(dev, 0x83, c);
> +
> + pci_write_config_byte(dev, 0x09, 0x01);
> + pci_write_config_byte(dev, 0x0a, 0x06);
> +
> + pci_read_config_byte(dev,0x83,&c);
> + c &= 0x7f;
> + pci_write_config_byte(dev, 0x83, c);
> +
> + pci_read_config_byte(dev,0x84,&c);
> + c |= 0x01;
> + pci_write_config_byte(dev, 0x84, c);
> +}
> +
> +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_ali1575);
> +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
> +
> diff --git a/arch/powerpc/platforms/86xx/pex.c b/arch/powerpc/platforms/86xx/pex.c
> new file mode 100644
> index 0000000..2624d3c
> --- /dev/null
> +++ b/arch/powerpc/platforms/86xx/pex.c
> @@ -0,0 +1,173 @@
> +/*
> + * Support for indirect PCI bridges.
> + *
> + * Copyright (C) 1998 Gabriel Paubert.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version
> + * 2 of the License, or (at your option) any later version.
> + *
> + * "Temporary" MPC8548 Errata file -
> + * The standard indirect_pci code should work with future silicon versions.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/pci.h>
> +#include <linux/delay.h>
> +#include <linux/string.h>
> +#include <linux/init.h>
> +#include <linux/bootmem.h>
> +
> +#include <asm/io.h>
> +#include <asm/prom.h>
> +#include <asm/pci-bridge.h>
> +#include <asm/machdep.h>
> +
> +#include "mpc86xx.h"
> +
> +#define PCI_CFG_OUT out_be32
> +
> +/* ERRATA PCI-Ex 14 PEX Controller timeout */
> +#define PEX_FIX out_be32(hose->cfg_addr+0x4, 0x0400ffff)
> +
> +
> +static int
> +indirect_read_config_pex(struct pci_bus *bus, unsigned int devfn, int offset,
> + int len, u32 *val)
> +{
> + struct pci_controller *hose = bus->sysdata;
> + volatile void __iomem *cfg_data;
> + u32 temp;
> +
> + if (ppc_md.pci_exclude_device)
> + if (ppc_md.pci_exclude_device(bus->number, devfn))
> + return PCIBIOS_DEVICE_NOT_FOUND;
> +
> + /* Possible artifact of CDCpp50937 needs further investigation */
> + if (devfn != 0x0 && bus->number == 0xff)
> + return PCIBIOS_DEVICE_NOT_FOUND;
> +
> + PEX_FIX;
> + if (bus->number == 0xff) {
> + PCI_CFG_OUT(hose->cfg_addr,
> + (0x80000000 | ((offset & 0xf00) << 16) |
> + ((bus->number - hose->bus_offset) << 16)
> + | (devfn << 8) | ((offset & 0xfc) )));
> + } else {
> + PCI_CFG_OUT(hose->cfg_addr,
> + (0x80000001 | ((offset & 0xf00) << 16) |
> + ((bus->number - hose->bus_offset) << 16)
> + | (devfn << 8) | ((offset & 0xfc) )));
> + }
> +
> + /*
> + * Note: the caller has already checked that offset is
> + * suitably aligned and that len is 1, 2 or 4.
> + */
> + /* ERRATA PCI-Ex 12 - Configuration Address/Data Alignment */
> + cfg_data = hose->cfg_data;
> + PEX_FIX;
> + temp = in_le32(cfg_data);
> + switch (len) {
> + case 1:
> + *val = (temp >> (((offset & 3))*8)) & 0xff;
> + break;
> + case 2:
> + *val = (temp >> (((offset & 3))*8)) & 0xffff;
> + break;
> + default:
> + *val = temp;
> + break;
> + }
> + return PCIBIOS_SUCCESSFUL;
> +}
> +
> +static int
> +indirect_write_config_pex(struct pci_bus *bus, unsigned int devfn, int offset,
> + int len, u32 val)
> +{
> + struct pci_controller *hose = bus->sysdata;
> + volatile void __iomem *cfg_data;
> + u32 temp;
> +
> + if (ppc_md.pci_exclude_device)
> + if (ppc_md.pci_exclude_device(bus->number, devfn))
> + return PCIBIOS_DEVICE_NOT_FOUND;
> +
> + /* Possible artifact of CDCpp50937 needs further investigation */
> + if (devfn != 0x0 && bus->number == 0xff)
> + return PCIBIOS_DEVICE_NOT_FOUND;
> +
> + PEX_FIX;
> + if (bus->number == 0xff) {
> + PCI_CFG_OUT(hose->cfg_addr,
> + (0x80000000 | ((offset & 0xf00) << 16) |
> + ((bus->number - hose->bus_offset) << 16)
> + | (devfn << 8) | ((offset & 0xfc) )));
> + } else {
> + PCI_CFG_OUT(hose->cfg_addr,
> + (0x80000001 | ((offset & 0xf00) << 16) |
> + ((bus->number - hose->bus_offset) << 16)
> + | (devfn << 8) | ((offset & 0xfc) )));
> + }
> +
> + /*
> + * Note: the caller has already checked that offset is
> + * suitably aligned and that len is 1, 2 or 4.
> + */
> + /* ERRATA PCI-Ex 12 - Configuration Address/Data Alignment */
> + cfg_data = hose->cfg_data;
> + switch (len) {
> + case 1:
> + PEX_FIX;
> + temp = in_le32(cfg_data);
> + temp = (temp & ~(0xff << ((offset & 3) * 8))) |
> + (val << ((offset & 3) * 8));
> + PEX_FIX;
> + out_le32(cfg_data, temp);
> + break;
> + case 2:
> + PEX_FIX;
> + temp = in_le32(cfg_data);
> + temp = (temp & ~(0xffff << ((offset & 3) * 8)));
> + temp |= (val << ((offset & 3) * 8)) ;
> + PEX_FIX;
> + out_le32(cfg_data, temp);
> + break;
> + default:
> + PEX_FIX;
> + out_le32(cfg_data, val);
> + break;
> + }
> + PEX_FIX;
> + return PCIBIOS_SUCCESSFUL;
> +}
> +
> +static struct pci_ops indirect_pex_ops = {
> + indirect_read_config_pex,
> + indirect_write_config_pex
> +};
> +
> +void __init
> +setup_indirect_pex_nomap(struct pci_controller* hose, void __iomem * cfg_addr,
> + void __iomem * cfg_data)
> +{
> + hose->cfg_addr = cfg_addr;
> + hose->cfg_data = cfg_data;
> + hose->ops = &indirect_pex_ops;
> +}
> +
> +void __init
> +setup_indirect_pex(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data)
> +{
> + unsigned long base = cfg_addr & PAGE_MASK;
> + void __iomem *mbase, *addr, *data;
> +
> + mbase = ioremap(base, PAGE_SIZE);
> + addr = mbase + (cfg_addr & ~PAGE_MASK);
> + if ((cfg_data & PAGE_MASK) != base)
> + mbase = ioremap(cfg_data & PAGE_MASK, PAGE_SIZE);
> + data = mbase + (cfg_data & ~PAGE_MASK);
> + setup_indirect_pex_nomap(hose, addr, data);
> +}
>
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
^ permalink raw reply
* Re: Linux kernel 2.6 on IBM RS/6000 7025-F40
From: Benjamin Herrenschmidt @ 2006-06-09 4:38 UTC (permalink / raw)
To: Christophe Simon; +Cc: linuxppc-dev
In-Reply-To: <BAY109-F5B7EE1B27D613DA2C4281AC8A0@phx.gbl>
On Wed, 2006-06-07 at 15:30 +0000, Christophe Simon wrote:
> Hi there,
>
> Did someone succeeded in compiling a running 2.6 kernel on an IBM RS/6000
> 7025-F40 (PReP arch) ? I have one of these machines, and it runs with a
> 2.4.22 kernel built using the instructions gathered on
> http://www.solinno.co.uk/7043-140/
>
> It seems that this machine is quite problematic.
>
> I tried to compile my own kernel with a stock 2.6.16.19, and after that
> 2.6.7 patched with the files I found for the 2.6.7 (at
> http://www.solinno.co.uk/7043-140/files/2.6.7/), but the system refuses to
> boot with those twoo kernels (the machine reboots or freezes before writing
> any piece of information on the console...).
>
> The site seems not to move anymore, and I'd like to have a 2.6 kernel
> running because of his better performances ans extended functionalities, and
> I'd like not to be stalled on 2.4.22 kernel...
>
> I crawled the web hours and hours (Google is my friend, but it didn't help
> me...) and I didn't find anything...
I've successfully booted a 43p, I don't know about F40 though. What is
the last message on the console when you try to boot the kernel ?
Ben.
^ permalink raw reply
* Re: Help -- failed to boot up kernel on PPC40 5
From: Wolfgang Denk @ 2006-06-09 7:40 UTC (permalink / raw)
To: Denny; +Cc: linuxppc-embedded
In-Reply-To: <4488D8D1.00003F.15159@bj163app14.163.com>
In message <4488D8D1.00003F.15159@bj163app14.163.com> you wrote:
>
> I use the linux 2.6.14 of your website, and compile it with the ELDK4.0 succesfully, but when I download it to my PPC405 board, it stopped after initialized the MMU, and encounter an exception in "_start_here".
Is this a standard AMCC eval board, or a custom board? Which one?
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
Those who hate and fight must stop themselves -- otherwise it is not
stopped.
-- Spock, "Day of the Dove", stardate unknown
^ permalink raw reply
* [RFC] I2C-MPC: Fix up error handling
From: Jean Delvare @ 2006-06-09 7:54 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Sylvain Munaut
Hi all,
Could anyone please comment on this i2c-mpc patch, and give it some
testing on different systems? I'm fine with the error propagation
fixes, but less fine with the random resets being added, and rather
unhappy with the "retry once more just in case" thing, which I think,
if really needed, should instead be implemented using the standard
i2c_adapter.retries mechanism.
Thanks.
From: Kumar Gala <galak@kernel.crashing.org>
* If we have an Unfinished (MCF) or Arbitration Lost (MAL) error and
the bus is still busy reset the controller. This prevents the
controller from getting in a hung state for transactions for other
devices.
* Fixed up propogating the errors from i2c_wait.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
---
drivers/i2c/busses/i2c-mpc.c | 43 +++++++++++++++++++++++----------
1 file changed, 31 insertions(+), 12 deletions(-)
diff -puN drivers/i2c/busses/i2c-mpc.c~i2c-mpc-fix-up-error-handling drivers/i2c/busses/i2c-mpc.c
--- devel/drivers/i2c/busses/i2c-mpc.c~i2c-mpc-fix-up-error-handling 2006-06-01 20:22:55.000000000 -0700
+++ devel-akpm/drivers/i2c/busses/i2c-mpc.c 2006-06-01 20:22:55.000000000 -0700
@@ -115,11 +115,20 @@ static int i2c_wait(struct mpc_i2c *i2c,
if (!(x & CSR_MCF)) {
pr_debug("I2C: unfinished\n");
+
+ /* reset the controller if the bus is still busy */
+ if (x & CSR_MBB)
+ writeccr(i2c, 0);
+
return -EIO;
}
if (x & CSR_MAL) {
pr_debug("I2C: MAL\n");
+
+ /* reset the controller if the bus is still busy */
+ if (x & CSR_MBB)
+ writeccr(i2c, 0);
return -EIO;
}
@@ -160,7 +169,7 @@ static void mpc_i2c_stop(struct mpc_i2c
static int mpc_write(struct mpc_i2c *i2c, int target,
const u8 * data, int length, int restart)
{
- int i;
+ int i, ret;
unsigned timeout = i2c->adap.timeout;
u32 flags = restart ? CCR_RSTA : 0;
@@ -172,15 +181,17 @@ static int mpc_write(struct mpc_i2c *i2c
/* Write target byte */
writeb((target << 1), i2c->base + MPC_I2C_DR);
- if (i2c_wait(i2c, timeout, 1) < 0)
- return -1;
+ ret = i2c_wait(i2c, timeout, 1);
+ if (ret < 0)
+ return ret;
for (i = 0; i < length; i++) {
/* Write data byte */
writeb(data[i], i2c->base + MPC_I2C_DR);
- if (i2c_wait(i2c, timeout, 1) < 0)
- return -1;
+ ret = i2c_wait(i2c, timeout, 1);
+ if (ret < 0)
+ return ret;
}
return 0;
@@ -190,7 +201,7 @@ static int mpc_read(struct mpc_i2c *i2c,
u8 * data, int length, int restart)
{
unsigned timeout = i2c->adap.timeout;
- int i;
+ int i, ret;
u32 flags = restart ? CCR_RSTA : 0;
/* Start with MEN */
@@ -201,8 +212,9 @@ static int mpc_read(struct mpc_i2c *i2c,
/* Write target address byte - this time with the read flag set */
writeb((target << 1) | 1, i2c->base + MPC_I2C_DR);
- if (i2c_wait(i2c, timeout, 1) < 0)
- return -1;
+ ret = i2c_wait(i2c, timeout, 1);
+ if (ret < 0)
+ return ret;
if (length) {
if (length == 1)
@@ -214,8 +226,9 @@ static int mpc_read(struct mpc_i2c *i2c,
}
for (i = 0; i < length; i++) {
- if (i2c_wait(i2c, timeout, 0) < 0)
- return -1;
+ ret = i2c_wait(i2c, timeout, 0);
+ if (ret < 0)
+ return ret;
/* Generate txack on next to last byte */
if (i == length - 2)
@@ -246,8 +259,13 @@ static int mpc_xfer(struct i2c_adapter *
return -EINTR;
}
if (time_after(jiffies, orig_jiffies + HZ)) {
- pr_debug("I2C: timeout\n");
- return -EIO;
+ writeccr(i2c, 0);
+
+ /* try one more time before we error */
+ if (readb(i2c->base + MPC_I2C_SR) & CSR_MBB) {
+ pr_debug("I2C: timeout\n");
+ return -EIO;
+ }
}
schedule();
}
@@ -325,6 +343,7 @@ static int fsl_i2c_probe(struct platform
goto fail_irq;
}
+ writeccr(i2c, 0);
mpc_i2c_setclock(i2c);
platform_set_drvdata(pdev, i2c);
_
--
Jean Delvare
^ permalink raw reply
* Re: [PATCH 10/10 v2] Document I2C_MPC option for 86xx too.
From: Jean Delvare @ 2006-06-09 7:37 UTC (permalink / raw)
To: Jon Loeliger; +Cc: linuxppc-dev
In-Reply-To: <1149804296.23938.298.camel@cashmere.sps.mot.com>
Hi Jon,
Please add a paragraph explaining what the patch does. It will be used
as the git commit message.
> Signed-off-by: Jon Loeliger <jdl@freescale.com>
>
> ---
> drivers/i2c/busses/Kconfig | 4 ++--
> 1 files changed, 2 insertions(+), 2 deletions(-)
>
>
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index d6d4494..fbeae82 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -252,12 +252,12 @@ config I2C_POWERMAC
> will be called i2c-powermac.
>
> config I2C_MPC
> - tristate "MPC107/824x/85xx/52xx"
> + tristate "MPC107/824x/85xx/52xx/86xx"
Maybe leave 52xx at the end, as it seems to be special?
> depends on I2C && PPC32
> help
> If you say yes to this option, support will be included for the
> built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245 and
> - MPC85xx family processors. The driver may also work on 52xx
> + MPC85xx/MPC8641 family processors. The driver may also work on 52xx
> family processors, though interrupts are known not to work.
>
> This driver can also be built as a module. If so, the module
>
This isn't very consistent, you first say 86xx as if several chips were
supported, then only list the MPC8641. Also, "MPC85xx family" made
sense but "MPC8641 family" doesn't.
When fixed, do you expect me to take that patch, or will it be merged
through the powerpc git tree?
--
Jean Delvare
^ permalink raw reply
* Re: [PATCH] force 64bit mode in system_reset_fwnmi for broken POWER4 firmware
From: Paul Mackerras @ 2006-06-09 8:11 UTC (permalink / raw)
To: Olaf Hering; +Cc: linuxppc-dev
In-Reply-To: <20060523130717.GA22364@suse.de>
Olaf Hering writes:
> The reason is that system_reset_fwnmi is called in 32bit mode. Forcing
> 64bit mode fixes the corrupt NIP for me. JS20 and p690 are affected,
> seems to work on p550 and JS21.
What was the LTC bugzilla number for this again?
Paul.
^ permalink raw reply
* Re: [PATCH] hugetlb: powerpc: Actively close unused htlb regions on vma close
From: David Gibson @ 2006-06-09 8:49 UTC (permalink / raw)
To: Christoph Lameter; +Cc: linux-mm, linuxppc-dev, linux-kernel
In-Reply-To: <Pine.LNX.4.64.0606021407580.6179@schroedinger.engr.sgi.com>
On Fri, Jun 02, 2006 at 02:08:27PM -0700, Christoph Lameter wrote:
> On Fri, 2 Jun 2006, Adam Litke wrote:
>
> > The real reason I want to "close" hugetlb regions (even on 64bit
> > platforms) is so a process can replace a previous hugetlb mapping with
> > normal pages when huge pages become scarce. An example would be the
> > hugetlb morecore (malloc) feature in libhugetlbfs :)
>
> Well that approach wont work on IA64 it seems.
Yes, but there's not much that can be done about that.
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
^ permalink raw reply
* Re: a problem of kernel-module version mismatch.
From: Ming Liu @ 2006-06-09 8:58 UTC (permalink / raw)
To: arnd.bergmann; +Cc: linuxppc-embedded
In-Reply-To: <200606081725.37621.arnd.bergmann@de.ibm.com>
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=gb2312; format=flowed, Size: 4664 bytes --]
Hello Arnd,
I found a problem on unsolved symbol XIo_In32 and XIo_Out32: in the linux
kernel directory of <kernel>/arch/ppc/platforms/xilinx_ocp, the original
xio.h file lying there is provided by MontaVista. But when I use xilinx EDK
to generate the driver for my perapheral, it generates such a file which is
provided by Xilinx. There are some differneces between these two files. One
is in the MVista version, the XIo_In32 or XIo_Out32 are defined as 'u32'
type while in the Xilinx version as 'xuint32'. When I compiled the driver
module, if I refered the header file to MVista xio.h, an error will appear
which is 'xuint32' undeclared. If I refered to the Xilinx xio.h, the
compilation succeeded. Do you think is that the reason why these two
symbols cannot be resolved by Linux? Shall I use the MVista version xio.h
and define XIo_In32 and XIo_out32 as 'u32' type and then the linux could
recognize these two symbols? Waiting for your help. Thanks a lot.
Any information about this problem is also appreciated.
Regards
Ming
>From: Arnd Bergmann <arnd.bergmann@de.ibm.com>
>To: "Ming Liu" <eemingliu@hotmail.com>
>CC: linuxppc-embedded@ozlabs.org
>Subject: Re: a problem of kernel-module version mismatch.
>Date: Thu, 8 Jun 2006 17:25:37 +0200
>
>On Thursday 08 June 2006 15:52, Ming Liu wrote:
> > >The easiest way is usually to put the driver in your source tree
> > >and compile everything together. That also makes it easier to
> > >distribute the complete source tree to your users.
> >
> > Sorry that I am a novice in Linux. I don't know how can I put the
driver in
> > my source tree and compile everything together. It looks like that
there is
> > no option in the menuconfig to choose a specially customed peripheral.
So I
> > think I only can include the customed peripheral as a module. Could you
> > please say in a detail on how to do that?
>
>The most simple way would be to put it into linux/drivers/misc and add it
>to the Makefile in there.
>
> > > > insmod: unresolved symbol XIo_In32
> > > > insmod: unresolved symbol XIO_Out32
> > >
> > >that looks like part of your module is missing. Try to find where
thses
> > >functions are defined in there and why that isn't compiled.
> >
> > It's very strange because I have checked the source. In the header file
of
> > xio.h, there are the following sentences,
> >
> > /************************** Function Prototypes
> > ******************************/
> >
> > /* The following functions allow the software to be transportable
across
> > ? processors which may use memory mapped I/O or I/O which is mapped
into a
> > ? seperate address space such as X86. The functions are better suited
for
> > ? debugging and are therefore the default implementation. Macros can
> > instead
> > ? be used if USE_IO_MACROS is defined.
> > ?/
> > #ifndef USE_IO_MACROS
>
>The comment tells you that you either need to implement these functions
>youself or #define USE_IO_MACROS in the code before this.
>
> > /* Functions */
> > Xuint8 XIo_In8(XIo_Address InAddress);
> > Xuint16 XIo_In16(XIo_Address InAddress);
> > Xuint32 XIo_In32(XIo_Address InAddress);
> >
> > void XIo_Out8(XIo_Address OutAddress, Xuint8 Value);
> > void XIo_Out16(XIo_Address OutAddress, Xuint16 Value);
> > void XIo_Out32(XIo_Address OutAddress, Xuint32 Value);
> >
> > #else
> >
> > /* The following macros allow optimized I/O operations for memory
mapped
> > I/O
> > ? Note that the SYNCHRONIZE_IO may be moved by the compiler during
> > ? optimization.
> > ?/
> >
> > #define XIo_In8(InputPtr) ?*(volatile Xuint8 ?)(InputPtr));
> > SYNCHRONIZE_IO;
> > #define XIo_In16(InputPtr) (*(volatile Xuint16 *)(InputPtr));
> > SYNCHRONIZE_IO;
> > #define XIo_In32(InputPtr) (*(volatile Xuint32 *)(InputPtr));
> > SYNCHRONIZE_IO;
> >
> > #define XIo_Out8(OutputPtr, Value) \
> > ??{ (*(volatile Xuint8 ?)(OutputPtr) = Value); SYNCHRONIZE_IO; }
> > #define XIo_Out16(OutputPtr, Value) \
> > ??{ (*(volatile Xuint16 *)(OutputPtr) = Value); SYNCHRONIZE_IO; }
> > #define XIo_Out32(OutputPtr, Value) \
> > ??{ (*(volatile Xuint32 *)(OutputPtr) = Value); SYNCHRONIZE_IO; }
> >
> > #endif
>
>These macros are probably broken on powerpc.
>
> >
> > I think these are the defination of XIo_In32 and XIo_Out32. Also,
during
> > the compilation, there is no error to complain that "XIo_In32 or
XIo_Out32
> > undeclared".
> >
>
>I would suggest you remove that part of the header file completely, and
>replace it with:
>
>#define XIo_In32(p) in_le32(x)
>#define XIO_Out32(p,v) out_le32(p, v)
>
> Arnd <><
_________________________________________________________________
Ãâ·ÑÏÂÔØ MSN Explorer: http://explorer.msn.com/lccn/
^ permalink raw reply
* Re: [PATCH] force 64bit mode in system_reset_fwnmi for broken POWER4 firmware
From: Olaf Hering @ 2006-06-09 9:04 UTC (permalink / raw)
To: Paul Mackerras; +Cc: linuxppc-dev
In-Reply-To: <17545.11572.518355.586057@cargo.ozlabs.ibm.com>
On Fri, Jun 09, Paul Mackeras wrote:
> Olaf Hering writes:
>
> > The reason is that system_reset_fwnmi is called in 32bit mode. Forcing
> > 64bit mode fixes the corrupt NIP for me. JS20 and p690 are affected,
> > seems to work on p550 and JS21.
>
> What was the LTC bugzilla number for this again?
LTC22581, the last comments confirm that firmware leaves the cpu in
32bit mode.
^ permalink raw reply
* Re: [RFC/PATCH] powersave_nap cleanup
From: Paul Mackerras @ 2006-06-09 9:14 UTC (permalink / raw)
To: Nathan Lynch; +Cc: linuxppc-dev
In-Reply-To: <20060526140227.GE8934@localdomain>
Nathan Lynch writes:
> Rename machdep_calls.power_save to machdep_calls.powersave_nap to make
> more apparent the connection with the powersave_nap sysctl.
Hmmm, it's possibly a bit confusing to have a variable and a function
with the same name...
Paul.
^ permalink raw reply
* unsubscribe
From: rohitash panda @ 2006-06-09 9:19 UTC (permalink / raw)
To: Linuxppc-dev
[-- Attachment #1: Type: text/plain, Size: 137 bytes --]
Ability is what you are capable of doing.
Motivation determines what you do.
Attitude determines how well you do it.
[-- Attachment #2: Type: text/html, Size: 537 bytes --]
^ permalink raw reply
* RE: [PATCH/2.6.17-rc4 4/10]Powerpc: Add tsi108 pic support
From: Zang Roy-r61911 @ 2006-06-09 9:25 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Alexandre Bounine
Cc: linuxppc-dev list, Paul Mackerras, Yang Xin-Xin-r48390
>
> On Tue, 2006-06-06 at 10:45 -0400, Alexandre Bounine wrote:
>
> > We have a level-signalled irq from the cascaded PCI interrupt
> > controller. If I do EOI at this time, level request will not have
> > chance to be cleared (unless all PCI interrupts have an
> SA_INTERRUPT flag) and result in recurring interrupts.
>
> Hrm... Ok, when the cascade is a 8259 or an MPIC, we don't
> have that problem despite the output also being level... I
> think that's because the cascade handler itself will mask the
> cascade interrupt (on MPIC, reading the irq does an ack which
> will mask that priority level). If your cascaded controller
> doesn't act this way, you may need something a bit different
> in your cascade handler rather than changing mpic.
>
> However, I wouldn't bother too much. As I said, this is all
> changing a lot at the moment as I'm porting powerpc to Ingo
> Molnar and Thomas Gleixner's new "genirq" layer. Cascade
> handling will be different and taken out of MPIC, so you'll
> be able to implement it the way your want (with much greater
> control on what happens) without changing the MPIC driver.
>
> I'll have patches posted on the list in a few days hopefully.
>
> > I chose to have an individual flag instead of checking model ID to
> > avoid multiple checks within ISR (in case if we have more
> that one mpic version requiring this option). I also expect
> that it may be
> > useful for any external level-signalling cascades connected
> to MPIC.
>
> As I said above, I think it can just go away with the port to genirq.
>
> > Motivation is the same as above - I just do not want to
> have multiple
> > ID checks here. I agree that it is driven by mpic type (model ID)
> > only. I can remove this one if you do not expect any new
> "broken" MPICs on horizon.
>
> Well, I do expect broken ones but not with that specific issue :)
>
> Cheers,
> Ben.
>
update mpic support for tsi108 .
Any comment?
diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
index db5dc10..efee7da 100644
--- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
+++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
@@ -43,7 +43,16 @@ #include <asm/pci-bridge.h> #include <asm/reg.h> #include <mm/mmu_decl.h> #include "mpc7448_hpc2.h"
-#include <asm/tsi108_pic.h>
+#include <asm/tsi108_irq.h>
+#include <asm/mpic.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt...) do { printk(fmt); } while(0) #else #define
+DBG(fmt...) do { } while(0) #endif
#ifndef CONFIG_PCI
isa_io_base = MPC7448_HPC2_ISA_IO_BASE; @@ -53,20 +62,8 @@ #endif
extern int add_bridge(struct device_node *dev); extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
-
-#ifdef TSI108_ETH
-hw_info hw_info_table[TSI108_ETH_MAX_PORTS + 1] = {
- {TSI108_CSR_ADDR_PHYS + TSI108_ETH_OFFSET,
- TSI108_CSR_ADDR_PHYS + TSI108_ETH_OFFSET,
- TSI108_PHY0_ADDR, IRQ_TSI108_GIGE0},
-
- {TSI108_CSR_ADDR_PHYS + TSI108_ETH_OFFSET + 0x400,
- TSI108_CSR_ADDR_PHYS + TSI108_ETH_OFFSET,
- TSI108_PHY1_ADDR, IRQ_TSI108_GIGE1},
-
- {TBL_END, TBL_END, TBL_END, TBL_END}
-};
-#endif
+extern void tsi108_pci_int_init(void);
+extern int tsi108_irq_cascade(struct pt_regs *regs, void *unused);
/*
* Define all of the IRQ senses and polarities. Taken from the @@ -76,10 +73,32 @@ #endif
*/
static u_char mpc7448_hpc2_pic_initsenses[] __initdata = {
+ /* External on-board sources */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[0] XINT0 from FPGA */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[1] XINT1 from FPGA */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[2] PHY_INT from both GIGE */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[3] RESERVED */
+ /* Internal Tsi108/109 interrupt sources */
+ (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
+ (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
+ (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
+ (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
+ (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA0 */
+ (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA1 */
+ (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA2 */
+ (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA3 */
+ (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* UART0 */
+ (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* UART1 */
+ (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* I2C */
+ (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* GPIO */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* GIGE0 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* GIGE1 */
+ (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
+ (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* HLP */
+ (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* SDC */
+ (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Processor IF */
+ (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* PCI/X block */
};
/*
@@ -196,18 +215,43 @@ #endif
*/
static void __init mpc7448_hpc2_init_IRQ(void) {
+ struct mpic *mpic;
+ phys_addr_t mpic_paddr = 0;
+ struct device_node *tsi_pic;
+
+ tsi_pic = of_find_node_by_type(NULL, "open-pic");
+ if (tsi_pic) {
+ unsigned int size;
+ void *prop = get_property(tsi_pic, "reg", &size);
+ mpic_paddr = of_translate_address(tsi_pic, prop);
+ }
- tsi108_pic_init(mpc7448_hpc2_pic_initsenses);
+ if (mpic_paddr == 0) {
+ printk("%s: No tsi108 PIC found !\n", __FUNCTION__);
+ return;
+ }
- /* Configure MPIC outputs to CPU0 */
- tsi108_pic_set_output(0, IRQ_SENSE_EDGE, IRQ_POLARITY_NEGATIVE);
-}
+ DBG("%s: tsi108pic phys_addr = 0x%x\n", __FUNCTION__,
+ (u32) mpic_paddr);
-static void __init mpc7448_hpc2_map_io(void) -{
- /* Tsi108 CSR mapping */
- io_block_mapping(TSI108_CSR_ADDR_VIRT, TSI108_CSR_ADDR_PHYS,
- 0x100000, _PAGE_IO);
+ mpic = mpic_alloc(mpic_paddr,
+ MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET |
+ MPIC_SPV_EOI | MPIC_MOD_ID(MPIC_ID_TSI108),
+ 0, /* num_sources used */
+ TSI108_IRQ_BASE,
+ 0, /* num_sources used */
+ NR_IRQS - 4 /* XXXX */,
+ mpc7448_hpc2_pic_initsenses,
+ sizeof(mpc7448_hpc2_pic_initsenses), "Tsi108_PIC");
+
+ BUG_ON(mpic == NULL); /* XXXX */
+
+ mpic_init(mpic);
+ mpic_setup_cascade(IRQ_TSI108_PCI, tsi108_irq_cascade, mpic);
+ tsi108_pci_int_init();
+
+ /* Configure MPIC outputs to CPU0 */
+ tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0);
}
void mpc7448_hpc2_show_cpuinfo(struct seq_file *m) @@ -269,10 +313,9 @@ define_machine(mpc7448_hpc2){
.setup_arch = mpc7448_hpc2_setup_arch,
.init_IRQ = mpc7448_hpc2_init_IRQ,
.show_cpuinfo = mpc7448_hpc2_show_cpuinfo,
- .get_irq = tsi108_pic_get_irq,
+ .get_irq = mpic_get_irq,
.restart = mpc7448_hpc2_restart,
.calibrate_decr = generic_calibrate_decr,
- .setup_io_mappings = mpc7448_hpc2_map_io,
.machine_check_exception= mpc7448_machine_check_exception,
.progress = udbg_progress,
};
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 8c0afb7..048e1f6 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -8,4 +8,4 @@ obj-$(CONFIG_U3_DART) += dart_iommu.o
obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o
obj-$(CONFIG_PPC_83xx) += ipic.o
obj-$(CONFIG_FSL_SOC) += fsl_soc.o
-obj-$(CONFIG_TSI108_BRIDGE) += tsi108_common.o tsi108_pic.o
+obj-$(CONFIG_TSI108_BRIDGE) += tsi108_common.o tsi108_pci_int.o
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 7dcdfcb..fc21e47 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -55,6 +55,78 @@ #define distribute_irqs (0)
#endif
#endif
+static struct mpic_info mpic_infos[] = {
+ [0] = { /* Original OpenPIC compatible MPIC */
+ .greg_base = MPIC_GREG_BASE,
+ .greg_frr0 = MPIC_GREG_FEATURE_0,
+ .greg_config0 = MPIC_GREG_GLOBAL_CONF_0,
+ .greg_vendor_id = MPIC_GREG_VENDOR_ID,
+ .greg_ipi_vp0 = MPIC_GREG_IPI_VECTOR_PRI_0,
+ .greg_ipi_stride = MPIC_GREG_IPI_STRIDE,
+ .greg_spurious = MPIC_GREG_SPURIOUS,
+ .greg_tfrr = MPIC_GREG_TIMER_FREQ,
+
+ .timer_base = MPIC_TIMER_BASE,
+ .timer_stride = MPIC_TIMER_STRIDE,
+ .timer_ccr = MPIC_TIMER_CURRENT_CNT,
+ .timer_bcr = MPIC_TIMER_BASE_CNT,
+ .timer_vpr = MPIC_TIMER_VECTOR_PRI,
+ .timer_dest = MPIC_TIMER_DESTINATION,
+
+ .cpu_base = MPIC_CPU_BASE,
+ .cpu_stride = MPIC_CPU_STRIDE,
+ .cpu_ipi_disp0 = MPIC_CPU_IPI_DISPATCH_0,
+ .cpu_ipi_disp_stride = MPIC_CPU_IPI_DISPATCH_STRIDE,
+ .cpu_task_pri = MPIC_CPU_CURRENT_TASK_PRI,
+ .cpu_whoami = MPIC_CPU_WHOAMI,
+ .cpu_intack = MPIC_CPU_INTACK,
+ .cpu_eoi = MPIC_CPU_EOI,
+
+ .irq_base = MPIC_IRQ_BASE,
+ .irq_stride = MPIC_IRQ_STRIDE,
+ .irq_vpr = MPIC_IRQ_VECTOR_PRI,
+ .irq_vpr_vector = MPIC_VECPRI_VECTOR_MASK,
+ .irq_vpr_polpos = MPIC_VECPRI_POLARITY_POSITIVE,
+ .irq_vpr_senlvl = MPIC_VECPRI_SENSE_LEVEL,
+ .irq_dest = MPIC_IRQ_DESTINATION,
+ },
+
+ [1] = { /* Tsi108/109 PIC */
+ .greg_base = TSI108_GREG_BASE,
+ .greg_frr0 = TSI108_GREG_FEATURE_0,
+ .greg_config0 = TSI108_GREG_GLOBAL_CONF_0,
+ .greg_vendor_id = TSI108_GREG_VENDOR_ID,
+ .greg_ipi_vp0 = TSI108_GREG_IPI_VECTOR_PRI_0,
+ .greg_ipi_stride = TSI108_GREG_IPI_STRIDE,
+ .greg_spurious = TSI108_GREG_SPURIOUS,
+ .greg_tfrr = TSI108_GREG_TIMER_FREQ,
+
+ .timer_base = TSI108_TIMER_BASE,
+ .timer_stride = TSI108_TIMER_STRIDE,
+ .timer_ccr = TSI108_TIMER_CURRENT_CNT,
+ .timer_bcr = TSI108_TIMER_BASE_CNT,
+ .timer_vpr = TSI108_TIMER_VECTOR_PRI,
+ .timer_dest = TSI108_TIMER_DESTINATION,
+
+ .cpu_base = TSI108_CPU_BASE,
+ .cpu_stride = TSI108_CPU_STRIDE,
+ .cpu_ipi_disp0 = TSI108_CPU_IPI_DISPATCH_0,
+ .cpu_ipi_disp_stride = TSI108_CPU_IPI_DISPATCH_STRIDE,
+ .cpu_task_pri = TSI108_CPU_CURRENT_TASK_PRI,
+ .cpu_whoami = 0xFFFFFFFF,
+ .cpu_intack = TSI108_CPU_INTACK,
+ .cpu_eoi = TSI108_CPU_EOI,
+
+ .irq_base = TSI108_IRQ_REG_BASE,
+ .irq_stride = TSI108_IRQ_STRIDE,
+ .irq_vpr = TSI108_IRQ_VECTOR_PRI,
+ .irq_vpr_vector = TSI108_VECPRI_VECTOR_MASK,
+ .irq_vpr_polpos = TSI108_VECPRI_POLARITY_POSITIVE,
+ .irq_vpr_senlvl = TSI108_VECPRI_SENSE_LEVEL,
+ .irq_dest = TSI108_IRQ_DESTINATION,
+ },
+};
+
/*
* Register accessor functions
*/
@@ -81,7 +153,8 @@ static inline void _mpic_write(unsigned static inline u32 _mpic_ipi_read(struct mpic *mpic, unsigned int ipi) {
unsigned int be = (mpic->flags & MPIC_BIG_ENDIAN) != 0;
- unsigned int offset = MPIC_GREG_IPI_VECTOR_PRI_0 + (ipi * 0x10);
+ unsigned int offset = mpic->hw_set->greg_ipi_vp0 +
+ (ipi * mpic->hw_set->greg_ipi_stride);
if (mpic->flags & MPIC_BROKEN_IPI)
be = !be;
@@ -90,7 +163,8 @@ static inline u32 _mpic_ipi_read(struct
static inline void _mpic_ipi_write(struct mpic *mpic, unsigned int ipi, u32 value) {
- unsigned int offset = MPIC_GREG_IPI_VECTOR_PRI_0 + (ipi * 0x10);
+ unsigned int offset = mpic->hw_set->greg_ipi_vp0 +
+ (ipi * mpic->hw_set->greg_ipi_stride);
_mpic_write(mpic->flags & MPIC_BIG_ENDIAN, mpic->gregs, offset, value); } @@ -121,7 +195,7 @@ static inline u32 _mpic_irq_read(struct
unsigned int idx = src_no & mpic->isu_mask;
return _mpic_read(mpic->flags & MPIC_BIG_ENDIAN, mpic->isus[isu],
- reg + (idx * MPIC_IRQ_STRIDE));
+ reg + (idx * mpic->hw_set->irq_stride));
}
static inline void _mpic_irq_write(struct mpic *mpic, unsigned int src_no, @@ -131,7 +205,7 @@ static inline void _mpic_irq_write(struc
unsigned int idx = src_no & mpic->isu_mask;
_mpic_write(mpic->flags & MPIC_BIG_ENDIAN, mpic->isus[isu],
- reg + (idx * MPIC_IRQ_STRIDE), value);
+ reg + (idx * mpic->hw_set->irq_stride), value);
}
#define mpic_read(b,r) _mpic_read(mpic->flags & MPIC_BIG_ENDIAN,(b),(r))
@@ -157,8 +231,8 @@ static void __init mpic_test_broken_ipi( {
u32 r;
- mpic_write(mpic->gregs, MPIC_GREG_IPI_VECTOR_PRI_0, MPIC_VECPRI_MASK);
- r = mpic_read(mpic->gregs, MPIC_GREG_IPI_VECTOR_PRI_0);
+ mpic_write(mpic->gregs, mpic->hw_set->greg_ipi_vp0, MPIC_VECPRI_MASK);
+ r = mpic_read(mpic->gregs, mpic->hw_set->greg_ipi_vp0);
if (r == le32_to_cpu(MPIC_VECPRI_MASK)) {
printk(KERN_INFO "mpic: Detected reversed IPI registers\n"); @@ -392,8 +466,8 @@ static inline struct mpic * mpic_from_ir
/* Send an EOI */
static inline void mpic_eoi(struct mpic *mpic) {
- mpic_cpu_write(MPIC_CPU_EOI, 0);
- (void)mpic_cpu_read(MPIC_CPU_WHOAMI);
+ mpic_cpu_write(mpic->hw_set->cpu_eoi, 0);
+ (void)mpic_cpu_read(mpic->hw_set->cpu_task_pri);
}
#ifdef CONFIG_SMP
@@ -419,8 +493,8 @@ static void mpic_enable_irq(unsigned int
DBG("%p: %s: enable_irq: %d (src %d)\n", mpic, mpic->name, irq, src);
- mpic_irq_write(src, MPIC_IRQ_VECTOR_PRI,
- mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) &
+ mpic_irq_write(src, mpic->hw_set->irq_vpr,
+ mpic_irq_read(src, mpic->hw_set->irq_vpr) &
~MPIC_VECPRI_MASK);
/* make sure mask gets to controller before we return to user */ @@ -429,7 +503,7 @@ static void mpic_enable_irq(unsigned int
printk(KERN_ERR "mpic_enable_irq timeout\n");
break;
}
- } while(mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & MPIC_VECPRI_MASK);
+ } while(mpic_irq_read(src, mpic->hw_set->irq_vpr) & MPIC_VECPRI_MASK);
#ifdef CONFIG_MPIC_BROKEN_U3
if (mpic->flags & MPIC_BROKEN_U3) {
@@ -466,8 +540,8 @@ static void mpic_disable_irq(unsigned in
DBG("%s: disable_irq: %d (src %d)\n", mpic->name, irq, src);
- mpic_irq_write(src, MPIC_IRQ_VECTOR_PRI,
- mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) |
+ mpic_irq_write(src, mpic->hw_set->irq_vpr,
+ mpic_irq_read(src, mpic->hw_set->irq_vpr) |
MPIC_VECPRI_MASK);
/* make sure mask gets to controller before we return to user */ @@ -476,7 +550,7 @@ static void mpic_disable_irq(unsigned in
printk(KERN_ERR "mpic_enable_irq timeout\n");
break;
}
- } while(!(mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & MPIC_VECPRI_MASK));
+ } while(!(mpic_irq_read(src, mpic->hw_set->irq_vpr) &
+MPIC_VECPRI_MASK));
}
static void mpic_shutdown_irq(unsigned int irq) @@ -557,7 +631,7 @@ static void mpic_set_affinity(unsigned i
cpus_and(tmp, cpumask, cpu_online_map);
- mpic_irq_write(irq - mpic->irq_offset, MPIC_IRQ_DESTINATION,
+ mpic_irq_write(irq - mpic->irq_offset, mpic->hw_set->irq_dest,
mpic_physmask(cpus_addr(tmp)[0]));
}
@@ -613,18 +687,20 @@ #endif /* CONFIG_SMP */
mpic->num_sources = 0; /* so far */
mpic->senses = senses;
mpic->senses_count = senses_count;
+ mpic->hw_set = &mpic_infos[MPIC_GET_MOD_ID(flags)];
/* Map the global registers */
- mpic->gregs = ioremap(phys_addr + MPIC_GREG_BASE, 0x1000);
- mpic->tmregs = mpic->gregs + ((MPIC_TIMER_BASE - MPIC_GREG_BASE) >> 2);
+ mpic->gregs = ioremap(phys_addr + mpic->hw_set->greg_base, 0x1000);
+ mpic->tmregs = mpic->gregs +
+ ((mpic->hw_set->timer_base - mpic->hw_set->greg_base) >> 2);
BUG_ON(mpic->gregs == NULL);
/* Reset */
if (flags & MPIC_WANTS_RESET) {
- mpic_write(mpic->gregs, MPIC_GREG_GLOBAL_CONF_0,
- mpic_read(mpic->gregs, MPIC_GREG_GLOBAL_CONF_0)
+ mpic_write(mpic->gregs, mpic->hw_set->greg_config0,
+ mpic_read(mpic->gregs, mpic->hw_set->greg_config0)
| MPIC_GREG_GCONF_RESET);
- while( mpic_read(mpic->gregs, MPIC_GREG_GLOBAL_CONF_0)
+ while( mpic_read(mpic->gregs, mpic->hw_set->greg_config0)
& MPIC_GREG_GCONF_RESET)
mb();
}
@@ -633,7 +709,7 @@ #endif /* CONFIG_SMP */
* MPICs, num sources as well. On ISU MPICs, sources are counted
* as ISUs are added
*/
- reg = mpic_read(mpic->gregs, MPIC_GREG_FEATURE_0);
+ reg = mpic_read(mpic->gregs, mpic->hw_set->greg_frr0);
mpic->num_cpus = ((reg & MPIC_GREG_FEATURE_LAST_CPU_MASK)
>> MPIC_GREG_FEATURE_LAST_CPU_SHIFT) + 1;
if (isu_size == 0)
@@ -642,16 +718,16 @@ #endif /* CONFIG_SMP */
/* Map the per-CPU registers */
for (i = 0; i < mpic->num_cpus; i++) {
- mpic->cpuregs[i] = ioremap(phys_addr + MPIC_CPU_BASE +
- i * MPIC_CPU_STRIDE, 0x1000);
+ mpic->cpuregs[i] = ioremap(phys_addr + mpic->hw_set->cpu_base +
+ i * mpic->hw_set->cpu_stride, 0x1000);
BUG_ON(mpic->cpuregs[i] == NULL);
}
/* Initialize main ISU if none provided */
if (mpic->isu_size == 0) {
mpic->isu_size = mpic->num_sources;
- mpic->isus[0] = ioremap(phys_addr + MPIC_IRQ_BASE,
- MPIC_IRQ_STRIDE * mpic->isu_size);
+ mpic->isus[0] = ioremap(phys_addr + mpic->hw_set->irq_base,
+ mpic->hw_set->irq_stride * mpic->isu_size);
BUG_ON(mpic->isus[0] == NULL);
}
mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1); @@ -693,7 +769,8 @@ void __init mpic_assign_isu(struct mpic
BUG_ON(isu_num >= MPIC_MAX_ISU);
- mpic->isus[isu_num] = ioremap(phys_addr, MPIC_IRQ_STRIDE * mpic->isu_size);
+ mpic->isus[isu_num] = ioremap(phys_addr,
+ mpic->hw_set->irq_stride * mpic->isu_size);
if ((isu_first + mpic->isu_size) > mpic->num_sources)
mpic->num_sources = isu_first + mpic->isu_size; } @@ -729,14 +806,15 @@ void __init mpic_init(struct mpic *mpic)
printk(KERN_INFO "mpic: Initializing for %d sources\n", mpic->num_sources);
/* Set current processor priority to max */
- mpic_cpu_write(MPIC_CPU_CURRENT_TASK_PRI, 0xf);
+ mpic_cpu_write(mpic->hw_set->cpu_task_pri, 0xf);
/* Initialize timers: just disable them all */
for (i = 0; i < 4; i++) {
mpic_write(mpic->tmregs,
- i * MPIC_TIMER_STRIDE + MPIC_TIMER_DESTINATION, 0);
+ i * mpic->hw_set->timer_stride +
+ mpic->hw_set->timer_dest, 0);
mpic_write(mpic->tmregs,
- i * MPIC_TIMER_STRIDE + MPIC_TIMER_VECTOR_PRI,
+ i * mpic->hw_set->timer_stride + mpic->hw_set->timer_vpr,
MPIC_VECPRI_MASK |
(MPIC_VEC_TIMER_0 + i));
}
@@ -780,14 +858,14 @@ #endif /* CONFIG_MPIC_BROKEN_U3 */
/* do senses munging */
if (mpic->senses && i < mpic->senses_count) {
if (mpic->senses[i] & IRQ_SENSE_LEVEL)
- vecpri |= MPIC_VECPRI_SENSE_LEVEL;
+ vecpri |= mpic->hw_set->irq_vpr_senlvl;
if (mpic->senses[i] & IRQ_POLARITY_POSITIVE)
- vecpri |= MPIC_VECPRI_POLARITY_POSITIVE;
+ vecpri |= mpic->hw_set->irq_vpr_polpos;
} else
- vecpri |= MPIC_VECPRI_SENSE_LEVEL;
+ vecpri |= mpic->hw_set->irq_vpr_senlvl;
/* remember if it was a level interrupts */
- level = (vecpri & MPIC_VECPRI_SENSE_LEVEL);
+ level = (vecpri & mpic->hw_set->irq_vpr_senlvl);
/* deal with broken U3 */
if (mpic->flags & MPIC_BROKEN_U3) {
@@ -795,7 +873,7 @@ #ifdef CONFIG_MPIC_BROKEN_U3
if (mpic_is_ht_interrupt(mpic, i)) {
vecpri &= ~(MPIC_VECPRI_SENSE_MASK |
MPIC_VECPRI_POLARITY_MASK);
- vecpri |= MPIC_VECPRI_POLARITY_POSITIVE;
+ vecpri |= mpic->hw_set->irq_vpr_polpos;
}
#else
printk(KERN_ERR "mpic: BROKEN_U3 set, but CONFIG doesn't match\n"); @@ -806,8 +884,8 @@ #endif
(level != 0));
/* init hw */
- mpic_irq_write(i, MPIC_IRQ_VECTOR_PRI, vecpri);
- mpic_irq_write(i, MPIC_IRQ_DESTINATION,
+ mpic_irq_write(i, mpic->hw_set->irq_vpr, vecpri);
+ mpic_irq_write(i, mpic->hw_set->irq_dest,
1 << hard_smp_processor_id());
/* init linux descriptors */
@@ -818,15 +896,16 @@ #endif
}
/* Init spurrious vector */
- mpic_write(mpic->gregs, MPIC_GREG_SPURIOUS, MPIC_VEC_SPURRIOUS);
+ mpic_write(mpic->gregs, mpic->hw_set->greg_spurious,
+MPIC_VEC_SPURRIOUS);
- /* Disable 8259 passthrough */
- mpic_write(mpic->gregs, MPIC_GREG_GLOBAL_CONF_0,
- mpic_read(mpic->gregs, MPIC_GREG_GLOBAL_CONF_0)
- | MPIC_GREG_GCONF_8259_PTHROU_DIS);
+ /* Disable 8259 passthrough, if supported */
+ if (MPIC_GET_MOD_ID(mpic->flags) != MPIC_ID_TSI108)
+ mpic_write(mpic->gregs, mpic->hw_set->greg_config0,
+ mpic_read(mpic->gregs, mpic->hw_set->greg_config0)
+ | MPIC_GREG_GCONF_8259_PTHROU_DIS);
/* Set current processor priority to 0 */
- mpic_cpu_write(MPIC_CPU_CURRENT_TASK_PRI, 0);
+ mpic_cpu_write(mpic->hw_set->cpu_task_pri, 0);
}
@@ -845,9 +924,9 @@ void mpic_irq_set_priority(unsigned int
mpic_ipi_write(irq - mpic->ipi_offset,
reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT));
} else {
- reg = mpic_irq_read(irq - mpic->irq_offset,MPIC_IRQ_VECTOR_PRI)
+ reg = mpic_irq_read(irq - mpic->irq_offset,mpic->hw_set->irq_vpr)
& ~MPIC_VECPRI_PRIORITY_MASK;
- mpic_irq_write(irq - mpic->irq_offset, MPIC_IRQ_VECTOR_PRI,
+ mpic_irq_write(irq - mpic->irq_offset, mpic->hw_set->irq_vpr,
reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT));
}
spin_unlock_irqrestore(&mpic_lock, flags); @@ -864,7 +943,7 @@ unsigned int mpic_irq_get_priority(unsig
if (is_ipi)
reg = mpic_ipi_read(irq - mpic->ipi_offset);
else
- reg = mpic_irq_read(irq - mpic->irq_offset, MPIC_IRQ_VECTOR_PRI);
+ reg = mpic_irq_read(irq - mpic->irq_offset, mpic->hw_set->irq_vpr);
spin_unlock_irqrestore(&mpic_lock, flags);
return (reg & MPIC_VECPRI_PRIORITY_MASK) >> MPIC_VECPRI_PRIORITY_SHIFT; } @@ -890,12 +969,12 @@ #ifdef CONFIG_SMP
*/
if (distribute_irqs) {
for (i = 0; i < mpic->num_sources ; i++)
- mpic_irq_write(i, MPIC_IRQ_DESTINATION,
- mpic_irq_read(i, MPIC_IRQ_DESTINATION) | msk);
+ mpic_irq_write(i, mpic->hw_set->irq_dest,
+ mpic_irq_read(i, mpic->hw_set->irq_dest) | msk);
}
/* Set current processor priority to 0 */
- mpic_cpu_write(MPIC_CPU_CURRENT_TASK_PRI, 0);
+ mpic_cpu_write(mpic->hw_set->cpu_task_pri, 0);
spin_unlock_irqrestore(&mpic_lock, flags); #endif /* CONFIG_SMP */ @@ -905,7 +984,7 @@ int mpic_cpu_get_priority(void) {
struct mpic *mpic = mpic_primary;
- return mpic_cpu_read(MPIC_CPU_CURRENT_TASK_PRI);
+ return mpic_cpu_read(mpic->hw_set->cpu_task_pri);
}
void mpic_cpu_set_priority(int prio)
@@ -913,7 +992,7 @@ void mpic_cpu_set_priority(int prio)
struct mpic *mpic = mpic_primary;
prio &= MPIC_CPU_TASKPRI_MASK;
- mpic_cpu_write(MPIC_CPU_CURRENT_TASK_PRI, prio);
+ mpic_cpu_write(mpic->hw_set->cpu_task_pri, prio);
}
/*
@@ -935,11 +1014,11 @@ void mpic_teardown_this_cpu(int secondar
/* let the mpic know we don't want intrs. */
for (i = 0; i < mpic->num_sources ; i++)
- mpic_irq_write(i, MPIC_IRQ_DESTINATION,
- mpic_irq_read(i, MPIC_IRQ_DESTINATION) & ~msk);
+ mpic_irq_write(i, mpic->hw_set->irq_dest,
+ mpic_irq_read(i, mpic->hw_set->irq_dest) & ~msk);
/* Set current processor priority to max */
- mpic_cpu_write(MPIC_CPU_CURRENT_TASK_PRI, 0xf);
+ mpic_cpu_write(mpic->hw_set->cpu_task_pri, 0xf);
spin_unlock_irqrestore(&mpic_lock, flags); } @@ -955,7 +1034,8 @@ #ifdef DEBUG_IPI
DBG("%s: send_ipi(ipi_no: %d)\n", mpic->name, ipi_no); #endif
- mpic_cpu_write(MPIC_CPU_IPI_DISPATCH_0 + ipi_no * 0x10,
+ mpic_cpu_write(mpic->hw_set->cpu_ipi_disp0 +
+ ipi_no * mpic->hw_set->cpu_ipi_disp_stride,
mpic_physmask(cpu_mask & cpus_addr(cpu_online_map)[0])); }
@@ -963,7 +1043,7 @@ int mpic_get_one_irq(struct mpic *mpic, {
u32 irq;
- irq = mpic_cpu_read(MPIC_CPU_INTACK) & MPIC_VECPRI_VECTOR_MASK;
+ irq = mpic_cpu_read(mpic->hw_set->cpu_intack) &
+mpic->hw_set->irq_vpr_vector;
#ifdef DEBUG_LOW
DBG("%s: get_one_irq(): %d\n", mpic->name, irq); #endif @@ -972,11 +1052,17 @@ #ifdef DEBUG_LOW
DBG("%s: cascading ...\n", mpic->name); #endif
irq = mpic->cascade(regs, mpic->cascade_data);
+#ifdef DEBUG_LOW
+ DBG("%s: cascaded irq: %d\n", mpic->name, irq); #endif
mpic_eoi(mpic);
return irq;
}
- if (unlikely(irq == MPIC_VEC_SPURRIOUS))
+ if (unlikely(irq == MPIC_VEC_SPURRIOUS)) {
+ if (mpic->flags & MPIC_SPV_EOI)
+ mpic_eoi(mpic);
return -1;
+ }
if (irq < MPIC_VEC_IPI_0) {
#ifdef DEBUG_IRQ
DBG("%s: irq %d\n", mpic->name, irq + mpic->irq_offset); diff --git a/arch/powerpc/sysdev/tsi108_common.c b/arch/powerpc/sysdev/tsi108_common.c
index 3c55f99..03b5d8f 100644
--- a/arch/powerpc/sysdev/tsi108_common.c
+++ b/arch/powerpc/sysdev/tsi108_common.c
@@ -90,9 +90,13 @@ tsi108_direct_write_config(struct pci_bu {
volatile unsigned char *cfg_addr;
+ if (ppc_md.pci_exclude_device)
+ if (ppc_md.pci_exclude_device(bus->number, devfunc))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number,
devfunc, offset) |
- (offset & 0x03));
+ (offset & 0x03));
#ifdef TSI108_PCI_DEBUG
printk("PCI CFG write : ");
@@ -172,6 +176,10 @@ tsi108_direct_read_config(struct pci_bus
volatile unsigned char *cfg_addr;
u32 temp;
+ if (ppc_md.pci_exclude_device)
+ if (ppc_md.pci_exclude_device(bus->number, devfn))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number,
devfn,
offset) | (offset &
diff --git a/include/asm-powerpc/mpic.h b/include/asm-powerpc/mpic.h index 6b9e781..72131a4 100644
--- a/include/asm-powerpc/mpic.h
+++ b/include/asm-powerpc/mpic.h
@@ -37,6 +37,7 @@ #define MPIC_GREG_IPI_VECTOR_PRI_0 0x000
#define MPIC_GREG_IPI_VECTOR_PRI_1 0x000b0
#define MPIC_GREG_IPI_VECTOR_PRI_2 0x000c0
#define MPIC_GREG_IPI_VECTOR_PRI_3 0x000d0
+#define MPIC_GREG_IPI_STRIDE 0x10
#define MPIC_GREG_SPURIOUS 0x000e0
#define MPIC_GREG_TIMER_FREQ 0x000f0
@@ -64,6 +65,7 @@ #define MPIC_CPU_IPI_DISPATCH_0 0x00040
#define MPIC_CPU_IPI_DISPATCH_1 0x00050
#define MPIC_CPU_IPI_DISPATCH_2 0x00060
#define MPIC_CPU_IPI_DISPATCH_3 0x00070
+#define MPIC_CPU_IPI_DISPATCH_STRIDE 0x00010
#define MPIC_CPU_CURRENT_TASK_PRI 0x00080
#define MPIC_CPU_TASKPRI_MASK 0x0000000f
#define MPIC_CPU_WHOAMI 0x00090
@@ -91,6 +93,55 @@ #define MPIC_VECPRI_SENSE_EDGE 0x0000
#define MPIC_VECPRI_SENSE_MASK 0x00400000
#define MPIC_IRQ_DESTINATION 0x00010
+/**********************************************************************
+********
+ * Tsi108 implementation of MPIC has many differences form the original
+one */
+
+/*
+ * Global registers
+ */
+
+#define TSI108_GREG_BASE 0x00000
+#define TSI108_GREG_FEATURE_0 0x00000
+#define TSI108_GREG_GLOBAL_CONF_0 0x00004
+#define TSI108_GREG_VENDOR_ID 0x0000c
+#define TSI108_GREG_IPI_VECTOR_PRI_0 0x00204 /* Doorbell 0 */
+#define TSI108_GREG_IPI_STRIDE 0x0c
+#define TSI108_GREG_SPURIOUS 0x00010
+#define TSI108_GREG_TIMER_FREQ 0x00014
+
+/*
+ * Timer registers
+ */
+#define TSI108_TIMER_BASE 0x0030
+#define TSI108_TIMER_STRIDE 0x10
+#define TSI108_TIMER_CURRENT_CNT 0x00000
+#define TSI108_TIMER_BASE_CNT 0x00004
+#define TSI108_TIMER_VECTOR_PRI 0x00008
+#define TSI108_TIMER_DESTINATION 0x0000c
+
+/*
+ * Per-Processor registers
+ */
+#define TSI108_CPU_BASE 0x00300
+#define TSI108_CPU_STRIDE 0x00040
+#define TSI108_CPU_IPI_DISPATCH_0 0x00200
+#define TSI108_CPU_IPI_DISPATCH_STRIDE 0x00000
+#define TSI108_CPU_CURRENT_TASK_PRI 0x00000
+#define TSI108_CPU_INTACK 0x00004
+#define TSI108_CPU_EOI 0x00008
+
+/*
+ * Per-source registers
+ */
+#define TSI108_IRQ_REG_BASE 0x00100
+#define TSI108_IRQ_STRIDE 0x00008
+#define TSI108_IRQ_VECTOR_PRI 0x00000
+#define TSI108_VECPRI_VECTOR_MASK 0x000000ff
+#define TSI108_VECPRI_POLARITY_POSITIVE 0x01000000
+#define TSI108_VECPRI_SENSE_LEVEL 0x02000000
+#define TSI108_IRQ_DESTINATION 0x00004
+
#define MPIC_MAX_IRQ_SOURCES 2048
#define MPIC_MAX_CPUS 32
#define MPIC_MAX_ISU 32
@@ -124,6 +175,40 @@ struct mpic_irq_fixup }; #endif /* CONFIG_MPIC_BROKEN_U3 */
+struct mpic_info {
+ u32 greg_base; /* offset of global registers from MPIC base */
+ u32 greg_frr0; /* FRR0 offset from base */
+ u32 greg_config0; /* Global Config register offset from base */
+ u32 greg_vendor_id; /* VID register offset from base */
+ u32 greg_ipi_vp0; /* IPI Vector/Priority Registers */
+ u32 greg_ipi_stride; /* IPI Vector/Priority Registers spacing */
+ u32 greg_spurious; /* Spurious Vector Register */
+ u32 greg_tfrr; /* Global Timer Frequency Reporting Register */
+
+ u32 timer_base; /* Global Timer Registers base */
+ u32 timer_stride; /* Global Timer Registers spacing */
+ u32 timer_ccr; /* Global Timer Current Count Register */
+ u32 timer_bcr; /* Global Timer Base Count Register */
+ u32 timer_vpr; /* Global Timer Vector/Priority Register */
+ u32 timer_dest; /* Global Timer Destination Register */
+
+ u32 cpu_base; /* Global Timer Destination Register */
+ u32 cpu_stride; /* Global Timer Destination Register */
+ u32 cpu_ipi_disp0; /* IPI 0 Dispatch Command Register */
+ u32 cpu_ipi_disp_stride; /* IPI Dispatch spacing */
+ u32 cpu_task_pri; /* Processor Current Task Priority Register */
+ u32 cpu_whoami; /* Who Am I Register */
+ u32 cpu_intack; /* Interrupt Acknowledge Register */
+ u32 cpu_eoi; /* End of Interrupt Register */
+
+ u32 irq_base; /* Interrupt registers base */
+ u32 irq_stride; /* Interrupt registers spacing */
+ u32 irq_vpr; /* Interrupt Vector/Priority Register */
+ u32 irq_vpr_vector; /* Interrupt Vector Mask */
+ u32 irq_vpr_polpos; /* Interrupt Positive Polarity bit */
+ u32 irq_vpr_senlvl; /* Interrupt Level Sense bit */
+ u32 irq_dest; /* Interrupt Destination Register */
+};
/* The instance data of a given MPIC */ struct mpic @@ -168,6 +253,8 @@ #endif
volatile u32 __iomem *tmregs;
volatile u32 __iomem *cpuregs[MPIC_MAX_CPUS];
volatile u32 __iomem *isus[MPIC_MAX_ISU];
+ /* Pointer to HW info structure */
+ struct mpic_info *hw_set;
/* link */
struct mpic *next;
@@ -186,6 +273,14 @@ #define MPIC_BROKEN_U3 0x00000004
#define MPIC_BROKEN_IPI 0x00000008
/* MPIC wants a reset */
#define MPIC_WANTS_RESET 0x00000010
+/* Spurious vector requires EOI */
+#define MPIC_SPV_EOI 0x00000020
+/* MPIC HW modification ID */
+#define MPIC_MOD_ID_MASK 0x00000f00
+#define MPIC_MOD_ID(val) (((val) << 8) & MPIC_MOD_ID_MASK)
+#define MPIC_GET_MOD_ID(flags) (((flags) & MPIC_MOD_ID_MASK) >> 8)
+#define MPIC_ID_MPIC 0 /* Original MPIC */
+#define MPIC_ID_TSI108 1 /* Tsi108/109 PIC */
/* Allocate the controller structure and setup the linux irq descs
* for the range if interrupts passed in. No HW initialization is diff --git a/include/asm-powerpc/tsi108.h b/include/asm-powerpc/tsi108.h index ed9ec36..850c56d 100644
--- a/include/asm-powerpc/tsi108.h
+++ b/include/asm-powerpc/tsi108.h
@@ -55,6 +55,7 @@ #define TSI108_PCI_IRP_ENABLE (0x188)
#define TSI108_PCI_IRP_INTAD (0x18C)
#define TSI108_PCI_IRP_STAT_P_INT (0x00400000)
+#define TSI108_PCI_IRP_ENABLE_P_INT (0x00400000)
#define TSI108_CG_PWRUP_STATUS (0x234)
diff --git a/arch/powerpc/sysdev/tsi108_pci_int.c b/arch/powerpc/sysdev/tsi108_pci_int.c
index e69de29..c1ca187 100644
--- a/arch/powerpc/sysdev/tsi108_pci_int.c
+++ b/arch/powerpc/sysdev/tsi108_pci_int.c
@@ -0,0 +1,232 @@
+/*
+ * (C) Copyright 2005 Tundra Semiconductor Corp.
+ * Alex Bounine, <alexandreb@tundra.com).
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Tsi108 PCI Interrupt Handling (cascaded to MPIC) */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/sysdev.h>
+#include <asm/ptrace.h>
+#include <asm/signal.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+#include <asm/sections.h>
+#include <asm/hardirq.h>
+#include <asm/machdep.h>
+
+#include <asm/tsi108.h>
+#include <asm/tsi108_irq.h>
+
+#undef DEBUG
+#undef DBG_TSI108_INTERRUPT
+
+#ifdef DEBUG
+#define DBG(fmt...) do { printk(fmt); } while(0) #else #define
+DBG(fmt...) do { } while(0) #endif
+
+extern u32 get_vir_csrbase(void);
+extern u32 tsi108_read_reg(u32 reg_offset); extern void
+tsi108_write_reg(u32 reg_offset, u32 val);
+
+/*
+ * Low level utility functions
+ */
+
+static void tsi108_pci_int_mask(u_int irq) {
+ u_int irp_cfg;
+ int int_line = (irq - IRQ_PCI_INTAD_BASE);
+
+ irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
+ mb();
+ irp_cfg |= (1 << int_line); /* INTx_DIR = output */
+ irp_cfg &= ~(3 << (8 + (int_line * 2))); /* INTx_TYPE = unused */
+ tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, irp_cfg);
+ mb();
+ irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
+}
+
+static void tsi108_pci_int_unmask(u_int irq) {
+ u_int irp_cfg;
+ int int_line = (irq - IRQ_PCI_INTAD_BASE);
+
+ irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
+ mb();
+ irp_cfg &= ~(1 << int_line);
+ irp_cfg |= (3 << (8 + (int_line * 2)));
+ tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, irp_cfg);
+ mb();
+}
+
+static void init_pci_source(void)
+{
+ tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL,
+ 0x0000ff00);
+ tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE,
+ TSI108_PCI_IRP_ENABLE_P_INT);
+ mb();
+}
+
+static inline int get_pci_source(void)
+{
+ u_int temp = 0;
+ int irq = -1;
+ int i;
+ u_int pci_irp_stat;
+ static int mask = 0;
+
+ /* Read PCI/X block interrupt status register */
+ pci_irp_stat = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_STAT);
+ mb();
+
+ if (pci_irp_stat & TSI108_PCI_IRP_STAT_P_INT) {
+ /* Process Interrupt from PCI bus INTA# - INTD# lines */
+ temp =
+ tsi108_read_reg(TSI108_PCI_OFFSET +
+ TSI108_PCI_IRP_INTAD) & 0xf;
+ mb();
+ for (i = 0; i < 4; i++, mask++) {
+ if (temp & (1 << mask % 4)) {
+ irq = IRQ_PCI_INTA + mask % 4;
+ mask++;
+ break;
+ }
+ }
+
+ /* Disable interrupts from PCI block */
+ temp = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE);
+ tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE,
+ temp & ~TSI108_PCI_IRP_ENABLE_P_INT);
+ mb();
+ (void)tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE);
+ mb();
+ }
+#ifdef DBG_TSI108_INTERRUPT
+ else {
+ printk("TSI108_PIC: error in TSI108_PCI_IRP_STAT\n");
+ pci_irp_stat =
+ tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_STAT);
+ temp =
+ tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_INTAD);
+ mb();
+ printk(">> stat=0x%08x intad=0x%08x ", pci_irp_stat, temp);
+ temp =
+ tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
+ mb();
+ printk("cfg_ctl=0x%08x ", temp);
+ temp =
+ tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE);
+ mb();
+ printk("irp_enable=0x%08x\n", temp);
+ }
+#endif /* DBG_TSI108_INTERRUPT */
+
+ return irq;
+}
+
+
+/*
+ * Linux descriptor level callbacks
+ */
+
+static void tsi108_pci_irq_enable(u_int irq) {
+ tsi108_pci_int_unmask(irq);
+}
+
+static void tsi108_pci_irq_disable(u_int irq) {
+ tsi108_pci_int_mask(irq);
+}
+
+static void tsi108_pci_irq_ack(u_int irq) {
+ tsi108_pci_int_mask(irq);
+}
+
+static void tsi108_pci_irq_end(u_int irq) {
+ tsi108_pci_int_unmask(irq);
+
+ /* Enable interrupts from PCI block */
+ tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE,
+ tsi108_read_reg(TSI108_PCI_OFFSET +
+ TSI108_PCI_IRP_ENABLE) |
+ TSI108_PCI_IRP_ENABLE_P_INT);
+ mb();
+}
+
+/*
+ * Interrupt controller descriptor for cascaded PCI interrupt controller.
+ */
+
+struct hw_interrupt_type tsi108_pci_irq = {
+ .typename = "tsi108_PCI_int",
+ .enable = tsi108_pci_irq_enable,
+ .disable = tsi108_pci_irq_disable,
+ .ack = tsi108_pci_irq_ack,
+ .end = tsi108_pci_irq_end,
+};
+
+/*
+ * Exported functions
+ */
+
+/*
+ * The Tsi108 PCI interrupts initialization routine.
+ *
+ * The INTA# - INTD# interrupts on the PCI bus are reported by the PCI
+block
+ * to the MPIC using single interrupt source (IRQ_TSI108_PCI).
+Therefore the
+ * PCI block has to be treated as a cascaded interrupt controller
+connected
+ * to the MPIC.
+ */
+
+void __init tsi108_pci_int_init(void)
+{
+ u_int i;
+
+ DBG("Tsi108_pci_int_init: initializing PCI interrupts\n");
+
+ for (i = 0; i < NUM_PCI_IRQS; i++) {
+ irq_desc[i + IRQ_PCI_INTAD_BASE].handler = &tsi108_pci_irq;
+ irq_desc[i + IRQ_PCI_INTAD_BASE].status |= IRQ_LEVEL;
+ }
+
+ init_pci_source();
+}
+
+int tsi108_irq_cascade(struct pt_regs *regs, void *unused) {
+ return get_pci_source();
+}
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox