* Re: [patch 1/3] m68k/mac: Make mac_hid_mouse_emulate_buttons() declaration visible
From: Dmitry Torokhov @ 2007-07-22 4:22 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: linux-m68k, linux-kernel, Adrian Bunk, linuxppc-dev, linux-input,
Andrew Morton
In-Reply-To: <Pine.LNX.4.64.0707211026070.18493@anakin>
Hi Geert,
On Saturday 21 July 2007 04:27, Geert Uytterhoeven wrote:
> On Fri, 20 Jul 2007, Dmitry Torokhov wrote:
> >
> > I am OK with adding a new header file. I was just saying that placing
> > that declaration in linux/hid.h makes about the same sense as putting
> > it into linux/scsi.h
>
> At first I just wanted to move it. Then I thought about the angry
> comments I would get about not moving it to a header file ;-)
>
> <linux/hid.h> looked like the best candidate. <linux/kbd_kern.h> is
> another option.
>
linux/kbd_kern.h sounds much better.
--
Dmitry
^ permalink raw reply
* Re: [RFC 1/1] lro: Generic Large Receive Offload for TCP traffic
From: David Miller @ 2007-07-22 2:29 UTC (permalink / raw)
To: ossthema
Cc: tklein, themann, netdev, linux-kernel, linuxppc-dev, raisch,
meder, stefan.roscher
In-Reply-To: <200707201741.49290.ossthema@de.ibm.com>
From: Jan-Bernd Themann <ossthema@de.ibm.com>
Date: Fri, 20 Jul 2007 17:41:48 +0200
> Generic LRO patch
>
> Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com>
I have no general objections to this patch.
However I'd like to see at least one or two uses of these APIs before
we put it in, and it sounds as if we have at least two pending and
in the works if not ready already, so that shouldn't be an issue.
Thanks.
^ permalink raw reply
* Re: [PATCH] constify of_platform_driver match_table
From: David Miller @ 2007-07-22 2:10 UTC (permalink / raw)
To: sfr; +Cc: linux-kernel, wli, linuxppc-dev, paulus, sparclinux, akpm
In-Reply-To: <20070722002701.77622474.sfr@canb.auug.org.au>
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Sun, 22 Jul 2007 00:27:01 +1000
>
> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
> ---
> include/linux/of_platform.h | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> Built for PowerPC allmodconfig and ppc64_defconfig and Sparc and Sparc64
> defconfig.
Acked-by: David S. Miller <davem@davemloft.net>
^ permalink raw reply
* Re: [PATCH] constify of_platform_driver name
From: David Miller @ 2007-07-22 2:10 UTC (permalink / raw)
To: sfr; +Cc: linux-kernel, wli, linuxppc-dev, paulus, sparclinux, akpm
In-Reply-To: <20070722002303.df29f666.sfr@canb.auug.org.au>
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Sun, 22 Jul 2007 00:23:03 +1000
>
> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
> ---
> drivers/pcmcia/m8xx_pcmcia.c | 2 +-
> include/linux/of_platform.h | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> Built for PowerPC allmodconfig and ppc64_defconfig, and for Sparc and
> Sparc64 defconfig.
Acked-by: David S. Miller <davem@davemloft.net>
^ permalink raw reply
* Re: [PATCH] Don't compile the PMU power driver on 64-bit PowerPC
From: Stephen Rothwell @ 2007-07-22 1:55 UTC (permalink / raw)
To: Paul Mackerras; +Cc: linuxppc-dev, linux-kernel
In-Reply-To: <18082.43262.487474.356610@cargo.ozlabs.ibm.com>
[-- Attachment #1: Type: text/plain, Size: 850 bytes --]
On Sun, 22 Jul 2007 10:46:54 +1000 Paul Mackerras <paulus@samba.org> wrote:
>
> As reported by Stephen Rothwell, an allmodconfig build on 64-bit
> PowerPC reports these errors:
>
> ERROR: "pmu_batteries" [drivers/power/pmu_battery.ko] undefined!
> ERROR: "pmu_battery_count" [drivers/power/pmu_battery.ko] undefined!
> ERROR: "pmu_power_flags" [drivers/power/pmu_battery.ko] undefined!
>
> This fixes the problem by not building pmu_battery.ko on ppc64. There
> are no battery-powered ppc64 machines with an Apple PMU, and we can be
> reasonably confident there never will be.
>
> Signed-off-by: Paul Mackerras <paulus@samba.org>
That fixes it.
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
for what its worth :-)
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply
* Re: Someone broke my allmodconfig build
From: Stephen Rothwell @ 2007-07-22 1:53 UTC (permalink / raw)
To: Paul Mackerras; +Cc: ppc-dev
In-Reply-To: <18082.42674.651685.720737@cargo.ozlabs.ibm.com>
[-- Attachment #1: Type: text/plain, Size: 557 bytes --]
On Sun, 22 Jul 2007 10:37:06 +1000 Paul Mackerras <paulus@samba.org> wrote:
>
> Stephen Rothwell writes:
>
> > WRAP arch/powerpc/boot/zImage.ps3
> > /home/sfr/kernels/linus/arch/powerpc/boot/wrapper: line 113: dtc: command not found
> > make[2]: *** [arch/powerpc/boot/zImage.ps3] Error 1
>
> Hmmm, we should be shipping .dtb files with the tree, so people don't
> have to have dtc installed.
Unless, of course, we ship dtc ...
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply
* Re: Someone broke my allmodconfig build
From: Josh Boyer @ 2007-07-22 2:04 UTC (permalink / raw)
To: Paul Mackerras; +Cc: Stephen Rothwell, ppc-dev
In-Reply-To: <18082.42674.651685.720737@cargo.ozlabs.ibm.com>
On Sun, Jul 22, 2007 at 10:37:06AM +1000, Paul Mackerras wrote:
> Stephen Rothwell writes:
>
> > WRAP arch/powerpc/boot/zImage.ps3
> > /home/sfr/kernels/linus/arch/powerpc/boot/wrapper: line 113: dtc: command not found
> > make[2]: *** [arch/powerpc/boot/zImage.ps3] Error 1
>
> Hmmm, we should be shipping .dtb files with the tree, so people don't
> have to have dtc installed.
Really? I don't think we're quite ready for that. Particularly for the
embedded boards. Those DTS files still get lots of churn, and having to
update both the .dts and .dtb at the same time seems a bit fragile.
josh
^ permalink raw reply
* Re: [PATCH 1/2] OProfile - Enable SPU switch notification to detect currently active SPU tasks - update
From: Paul Mackerras @ 2007-07-22 1:37 UTC (permalink / raw)
To: Andrew Morton
Cc: Maynard Johnson, Philippe Elie, linuxppc, Bob Nelson,
Arnd Bergmann, oprofile
In-Reply-To: <20070720130241.176c50a5.akpm@linux-foundation.org>
Andrew Morton writes:
> I still wonder about that barrier. At the least it should be smp_mb().
> But aren't our set_bit() semantics _alone_ sufficient to make this barrier
> unneeded?
No, but our wake_up semantics certainly ought to be, if they aren't
already. It's the wake_up which implies synchronization with other
tasks, not the set_bit.
Paul.
^ permalink raw reply
* 8247 ether_fcc underruns, but only running kernel
From: Brad Parker @ 2007-07-22 0:51 UTC (permalink / raw)
To: linuxppc-dev
I have an 8247 which when running u-boot works fine on ethernet, both 10mb
and 100mb. It can dhcp and load a kernel.
But when I boot the kernel (2.4 or 2.6) the fcc transmits get an underrun
everytime. Packets are received fine. This is on FCC1.
(I'd suspect the tx clock, but ethernet is ok with u-boot. I double checked
the clock configs under linux.)
Does this ring a bell with anyone? I started out with rstconf#
grounded, (i.e. default speeds), but i also tried both the cpu and cpm
at 166mhz. Both acted the same.
I've no doubt got something misconfigured, but what... I've tried different
BCR settings.
-brad
^ permalink raw reply
* [PATCH] Don't compile the PMU power driver on 64-bit PowerPC
From: Paul Mackerras @ 2007-07-22 0:46 UTC (permalink / raw)
To: linuxppc-dev, linux-kernel
As reported by Stephen Rothwell, an allmodconfig build on 64-bit
PowerPC reports these errors:
ERROR: "pmu_batteries" [drivers/power/pmu_battery.ko] undefined!
ERROR: "pmu_battery_count" [drivers/power/pmu_battery.ko] undefined!
ERROR: "pmu_power_flags" [drivers/power/pmu_battery.ko] undefined!
This fixes the problem by not building pmu_battery.ko on ppc64. There
are no battery-powered ppc64 machines with an Apple PMU, and we can be
reasonably confident there never will be.
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 3f6e176..58c806e 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -38,7 +38,7 @@ config BATTERY_DS2760
config BATTERY_PMU
tristate "Apple PMU battery"
- depends on ADB_PMU
+ depends on PPC32 && ADB_PMU
help
Say Y here to expose battery information on Apple machines
through the generic battery class.
^ permalink raw reply related
* Re: Someone broke my allmodconfig build
From: Paul Mackerras @ 2007-07-22 0:37 UTC (permalink / raw)
To: Stephen Rothwell; +Cc: ppc-dev
In-Reply-To: <20070722001212.5007001d.sfr@canb.auug.org.au>
Stephen Rothwell writes:
> WRAP arch/powerpc/boot/zImage.ps3
> /home/sfr/kernels/linus/arch/powerpc/boot/wrapper: line 113: dtc: command not found
> make[2]: *** [arch/powerpc/boot/zImage.ps3] Error 1
Hmmm, we should be shipping .dtb files with the tree, so people don't
have to have dtc installed.
> ERROR: "pmu_batteries" [drivers/power/pmu_battery.ko] undefined!
> ERROR: "pmu_battery_count" [drivers/power/pmu_battery.ko] undefined!
> ERROR: "pmu_power_flags" [drivers/power/pmu_battery.ko] undefined!
I'd say CONFIG_BATTERY_PMU needs to depend on PPC32. There are no
battery-powered ppc64 machines with an Apple PMU, and we can say
pretty confidently there never will be.
Paul.
^ permalink raw reply
* Re: [PATCH] Fix tas_suspend/resume build warning
From: Stephen Rothwell @ 2007-07-21 23:55 UTC (permalink / raw)
To: Johannes Berg; +Cc: Takashi Iwai, linuxppc-dev, alsa-devel, Andrew Morton
In-Reply-To: <1185038966.868.5.camel@johannes.berg>
[-- Attachment #1: Type: text/plain, Size: 672 bytes --]
On Sat, 21 Jul 2007 19:29:26 +0200 Johannes Berg <johannes@sipsolutions.net> wrote:
>
> On Sun, 2007-07-22 at 00:29 +1000, Stephen Rothwell wrote:
> > sound/aoa/codecs/snd-aoa-codec-tas.c:750: warning: 'tas_suspend' defined but not used
> > sound/aoa/codecs/snd-aoa-codec-tas.c:760: warning: 'tas_resume' defined but not used
>
> Heh. I daresay I never compiled a kernel without PM. Not sure why you'd
> want to, but still good to have it fixed. Thanks.
Thats was a PowerPC ppc64_defconfig build. Why that has CONFIG_PM not set is anyone's guess :-)
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply
* [PATCH] Update kuroboxH[GD].dts with i2c rtc entries, cleanup
From: Guennadi Liakhovetski @ 2007-07-21 22:43 UTC (permalink / raw)
To: Paul Mackerras; +Cc: linuxppc-dev
Let's fix rtc on linkstation ppc machines again, plus .dts cleanup as
suggested by Segher Boessenkool.
Thanks
Guennadi
---
Guennadi Liakhovetski
Device tree update: add rtc nodes on i2c, remove bogus 0-size cache-line
declarations, rename interrupt-controller nodes, remove erroneous
interrupt-parent line, accidentally introduced by a recent patch.
Signed-off-by: G. Liakhovetski <g.liakhovetski@gmx.de>
diff --git a/arch/powerpc/boot/dts/kuroboxHD.dts b/arch/powerpc/boot/dts/kuroboxHD.dts
index a983680..1225374 100644
--- a/arch/powerpc/boot/dts/kuroboxHD.dts
+++ b/arch/powerpc/boot/dts/kuroboxHD.dts
@@ -33,12 +33,10 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts"
PowerPC,603e { /* Really 8241 */
device_type = "cpu";
reg = <0>;
- clock-frequency = <bebc200>; /* Fixed by bootwrapper */
- timebase-frequency = <1743000>; /* Fixed by bootwrapper */
- bus-frequency = <0>; /* From bootloader */
+ clock-frequency = <bebc200>; /* Fixed by bootloader */
+ timebase-frequency = <1743000>; /* Fixed by bootloader */
+ bus-frequency = <0>; /* Fixed by bootloader */
/* Following required by dtc but not used */
- i-cache-line-size = <0>;
- d-cache-line-size = <0>;
i-cache-size = <4000>;
d-cache-size = <4000>;
};
@@ -64,11 +62,19 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts"
fef00000 fef00000 00100000>; /* pci iack */
i2c@80003000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
device_type = "i2c";
compatible = "fsl-i2c";
reg = <80003000 1000>;
interrupts = <5 2>;
interrupt-parent = <&mpic>;
+
+ rtc@32 {
+ device_type = "rtc";
+ compatible = "ricoh,rs5c372b";
+ reg = <32>;
+ };
};
serial@80004500 {
@@ -91,7 +97,7 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts"
interrupt-parent = <&mpic>;
};
- mpic: pic@80040000 {
+ mpic: interrupt-controller@80040000 {
#interrupt-cells = <2>;
#address-cells = <0>;
device_type = "open-pic";
diff --git a/arch/powerpc/boot/dts/kuroboxHG.dts b/arch/powerpc/boot/dts/kuroboxHG.dts
index 5cf42dc..579aa8b 100644
--- a/arch/powerpc/boot/dts/kuroboxHG.dts
+++ b/arch/powerpc/boot/dts/kuroboxHG.dts
@@ -33,12 +33,10 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts"
PowerPC,603e { /* Really 8241 */
device_type = "cpu";
reg = <0>;
- clock-frequency = <fdad680>; /* Fixed by bootwrapper */
- timebase-frequency = <1F04000>; /* Fixed by bootwrapper */
- bus-frequency = <0>; /* From bootloader */
+ clock-frequency = <fdad680>; /* Fixed by bootloader */
+ timebase-frequency = <1F04000>; /* Fixed by bootloader */
+ bus-frequency = <0>; /* Fixed by bootloader */
/* Following required by dtc but not used */
- i-cache-line-size = <0>;
- d-cache-line-size = <0>;
i-cache-size = <4000>;
d-cache-size = <4000>;
};
@@ -64,11 +62,19 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts"
fef00000 fef00000 00100000>; /* pci iack */
i2c@80003000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
device_type = "i2c";
compatible = "fsl-i2c";
reg = <80003000 1000>;
interrupts = <5 2>;
interrupt-parent = <&mpic>;
+
+ rtc@32 {
+ device_type = "rtc";
+ compatible = "ricoh,rs5c372b";
+ reg = <32>;
+ };
};
serial@80004500 {
@@ -91,8 +97,7 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts"
interrupt-parent = <&mpic>;
};
- mpic: pic@80040000 {
- interrupt-parent = <&mpic>;
+ mpic: interrupt-controller@80040000 {
#interrupt-cells = <2>;
#address-cells = <0>;
device_type = "open-pic";
^ permalink raw reply related
* Re: [PATCH][09/37] Clean up duplicate includes in drivers/macintosh/
From: Benjamin Herrenschmidt @ 2007-07-21 22:11 UTC (permalink / raw)
To: Jesper Juhl; +Cc: linuxppc-dev, Andrew Morton, Linux Kernel Mailing List
In-Reply-To: <200707211702.30610.jesper.juhl@gmail.com>
On Sat, 2007-07-21 at 17:02 +0200, Jesper Juhl wrote:
> Hi,
>
> This patch cleans up duplicate includes in
> drivers/macintosh/
>
>
> Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> ---
>
> diff --git a/drivers/macintosh/rack-meter.c b/drivers/macintosh/rack-meter.c
> index 4177ff0..2c21d4f 100644
> --- a/drivers/macintosh/rack-meter.c
> +++ b/drivers/macintosh/rack-meter.c
> @@ -30,7 +30,6 @@
> #include <asm/machdep.h>
> #include <asm/pmac_feature.h>
> #include <asm/dbdma.h>
> -#include <asm/dbdma.h>
> #include <asm/macio.h>
> #include <asm/keylargo.h>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply
* 2.6.22-git OOPSes on PCMCIA card insertion on PowerBook G3 Lombard
From: Rutger Nijlunsing @ 2007-07-21 21:41 UTC (permalink / raw)
To: linuxppc-dev
[-- Attachment #1: Type: text/plain, Size: 22746 bytes --]
[ 0.000000] Using PowerMac machine description
[ 0.000000] Total memory = 320MB; using 1024kB for hash table (at cff00000)
[ 0.000000] Linux version 2.6.22-g2e3ee3d4 (rutger@wingding) (gcc version 4.0.2) #24 Sat Jul 21 23:10:03 CEST 2007
[ 0.000000] Found a Paddington mac-io controller, rev: 0, mapped at 0xfdf80000
[ 0.000000] PowerMac motherboard: PowerBook 101 (Lombard)
[ 0.000000] PMU driver v2 initialized for 1999 PowerBook G3, firmware: 0b
[ 0.000000] console [udbg0] enabled
[ 0.000000] Entering add_active_range(0, 0, 81920) 0 entries of 256 used
[ 0.000000] Found Grackle (MPC106) PCI host bridge at 0x0000000080000000. Firmware bus number: 0->0
[ 0.000000] nvram: OF partition at 0x140
[ 0.000000] nvram: XP partition at 0xffffffff
[ 0.000000] nvram: NR partition at 0xffffffff
[ 0.000000] Top of RAM: 0x14000000, Total RAM: 0x14000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 81920
[ 0.000000] Normal 81920 -> 81920
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 81920
[ 0.000000] On node 0 totalpages: 81920
[ 0.000000] DMA zone: 640 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 81280 pages, LIFO batch:15
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] Built 1 zonelists in Zone order. Total pages: 81280
[ 0.000000] Kernel command line: root=/dev/hda3 ro
[ 0.000000] irq: Found primary Apple PIC /pci@80000000/mac-io@10 for 64 irqs
[ 0.000000] irq: System has 64 possible interrupts
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] GMT Delta read from XPRAM: 0 minutes, DST: on
[ 0.000000] time_init: decrementer frequency = 16.704100 MHz
[ 0.000000] time_init: processor frequency = 399.999996 MHz
[ 0.000359] Console: colour dummy device 80x25
[ 0.001232] console handover: boot [udbg0] -> real [tty0]
[ 0.004371] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.007763] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.052732] Memory: 319488k/327680k available (3152k kernel code, 7844k reserved, 144k data, 225k bss, 184k init)
[ 0.053155] Calibrating delay loop... 33.38 BogoMIPS (lpj=166912)
[ 0.250186] Mount-cache hash table entries: 512
[ 0.253522] PM: Adding info for No Bus:platform
[ 0.254912] NET: Registered protocol family 16
[ 0.256926] PM: Adding info for No Bus:vtcon0
[ 0.258697] PMU i2c /pci@80000000/mac-io@10/via-pmu@16000
[ 0.258738] channel 1 bus <multibus>
[ 0.258750] channel 2 bus <multibus>
[ 0.258918] PCI: Probing PCI hardware
[ 0.258980] PM: Adding info for No Bus:pci0000:00
[ 0.259376] PCI: Scanning bus 0000:00
[ 0.259427] PCI: Found 0000:00:00.0 [1057/0002] 000600 00
[ 0.259474] PCI: Calling quirk c001238c for 0000:00:00.0
[ 0.259522] PCI: Found 0000:00:0e.0 [11c1/5801] 000c03 00
[ 0.259560] PCI: Calling quirk c001238c for 0000:00:0e.0
[ 0.259594] PCI: Found 0000:00:0f.0 [123f/8888] 000480 00
[ 0.259630] PCI: Calling quirk c001238c for 0000:00:0f.0
[ 0.259673] PCI: Found 0000:00:10.0 [106b/0017] 00ff00 00
[ 0.259708] PCI: Calling quirk c001238c for 0000:00:10.0
[ 0.259736] PCI: Found 0000:00:11.0 [1002/4c49] 000300 00
[ 0.259777] PCI: Calling quirk c001238c for 0000:00:11.0
[ 0.259806] PCI: Found 0000:00:13.0 [104c/ac1e] 000607 02
[ 0.259824] PCI: Calling quirk c001238c for 0000:00:13.0
[ 0.259849] PCI: Fixups for bus 0000:00
[ 0.260118] PCI: Scanning behind PCI bridge 0000:00:13.0, config 000000, pass 0
[ 0.260146] PCI: Scanning behind PCI bridge 0000:00:13.0, config 000000, pass 1
[ 0.260573] PCI: Bus scan for 0000:00 returning with max=04
[ 0.260618] PM: Adding info for pci:0000:00:00.0
[ 0.261064] PM: Adding info for pci:0000:00:0e.0
[ 0.261489] PM: Adding info for pci:0000:00:0f.0
[ 0.261886] PM: Adding info for pci:0000:00:10.0
[ 0.262292] PM: Adding info for pci:0000:00:11.0
[ 0.262741] PM: Adding info for pci:0000:00:13.0
[ 0.263192] PCI: Cannot allocate resource region 1 of device 0000:00:11.0
[ 0.263278] got res [1000:10ff] bus [1000:10ff] flags 101 for BAR 1 of 0000:00:11.0
[ 0.263297] PCI: moved device 0000:00:11.0 resource 1 (101) to 1000
[ 0.263366] Registering pmac pic with sysfs...
[ 0.263984] PM: Adding info for platform:i2c-powermac.0
[ 0.264059] PM: Adding info for platform:i2c-powermac.1
[ 0.273229] usbcore: registered new interface driver usbfs
[ 0.273639] usbcore: registered new interface driver hub
[ 0.274098] usbcore: registered new device driver usb
[ 0.276572] PM: Adding info for No Bus:mem
[ 0.276929] PM: Adding info for No Bus:kmem
[ 0.277269] PM: Adding info for No Bus:null
[ 0.277608] PM: Adding info for No Bus:port
[ 0.277984] PM: Adding info for No Bus:zero
[ 0.278361] PM: Adding info for No Bus:full
[ 0.278691] PM: Adding info for No Bus:random
[ 0.279016] PM: Adding info for No Bus:urandom
[ 0.279343] PM: Adding info for No Bus:kmsg
[ 0.279782] NET: Registered protocol family 2
[ 0.360162] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.360528] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.361668] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.362255] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.362279] TCP reno registered
[ 0.390568] Thermal assist unit using timers, shrink_timer: 200 jiffies
[ 0.393749] fuse init (API version 7.8)
[ 0.393885] PM: Adding info for No Bus:fuse
[ 0.394951] io scheduler noop registered
[ 0.394988] io scheduler anticipatory registered
[ 0.395032] io scheduler deadline registered
[ 0.395080] io scheduler cfq registered (default)
[ 0.395113] PCI: Calling quirk c001d878 for 0000:00:00.0
[ 0.395126] PCI: Calling quirk c011240c for 0000:00:00.0
[ 0.395137] PCI: Calling quirk c019720c for 0000:00:00.0
[ 0.395150] PCI: Calling quirk c001d878 for 0000:00:0e.0
[ 0.395160] PCI: Calling quirk c011240c for 0000:00:0e.0
[ 0.395170] PCI: Calling quirk c019720c for 0000:00:0e.0
[ 0.395226] PCI: Calling quirk c001d878 for 0000:00:0f.0
[ 0.395236] PCI: Calling quirk c011240c for 0000:00:0f.0
[ 0.395246] PCI: Calling quirk c019720c for 0000:00:0f.0
[ 0.395257] PCI: Calling quirk c001d878 for 0000:00:10.0
[ 0.395267] PCI: Calling quirk c011240c for 0000:00:10.0
[ 0.395277] PCI: Calling quirk c019720c for 0000:00:10.0
[ 0.395288] PCI: Calling quirk c001d878 for 0000:00:11.0
[ 0.395298] PCI: Calling quirk c011240c for 0000:00:11.0
[ 0.395308] PCI: Calling quirk c019720c for 0000:00:11.0
[ 0.395319] PCI: Calling quirk c001d878 for 0000:00:13.0
[ 0.395328] PCI: Calling quirk c001d9fc for 0000:00:13.0
[ 0.395347] PCI: Calling quirk c011240c for 0000:00:13.0
[ 0.395358] PCI: Calling quirk c019720c for 0000:00:13.0
[ 0.395462] PM: Adding info for No Bus:fbcon
[ 0.396239] PCI: Enabling device 0000:00:11.0 (0086 -> 0087)
[ 0.396328] atyfb: using auxiliary register aperture
[ 0.396897] atyfb: 3D RAGE LT PRO (Mach64 LI, PCI) [0x4c49 rev 0xdc]
[ 0.396955] atyfb: 8M SDRAM (1:1), 29.498928 MHz XTAL, 230 MHz PLL, 100 Mhz MCLK, 100 MHz XCLK
[ 0.397531] atyfb: monitor sense=62b, mode 6
[ 0.397664] PM: Adding info for No Bus:fb0
[ 0.398349] PM: Adding info for No Bus:vtcon1
[ 0.461667] Console: switching to colour frame buffer device 128x48
[ 0.481139] atyfb: fb0: ATY Mach64 frame buffer device on PCI
[ 0.482757] PM: Adding info for No Bus:tty
[ 0.483169] PM: Adding info for No Bus:console
[ 0.483514] PM: Adding info for No Bus:ptmx
[ 0.483852] PM: Adding info for No Bus:tty0
[ 0.484459] PM: Adding info for No Bus:vcs
[ 0.484802] PM: Adding info for No Bus:vcsa
[ 0.485166] PM: Adding info for No Bus:tty1
... (all 200 or so pty/tty lines deleted) ...
[ 0.770598] PM: Adding info for No Bus:ttyef
[ 0.771150] PM: Adding info for No Bus:apm_bios
[ 0.771485] Macintosh non-volatile memory driver v1.1
[ 0.771794] PM: Adding info for No Bus:nvram
[ 0.772143] pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
[ 0.772588] pmac_zilog: serial modem detected
[ 0.772935] ttyS0 at MMIO 0x80813020 (irq = 16) is a Z85c30 ESCC - Internal modem
[ 0.773588] PM: Adding info for No Bus:ttyS0
[ 0.773983] ttyS1 at MMIO 0x80813000 (irq = 17) is a Z85c30 ESCC - Infrared port
[ 0.774652] PM: Adding info for No Bus:ttyS1
[ 0.775759] PM: Adding info for No Bus:lo
[ 0.776186] netconsole: not configured, aborting
[ 0.776813] MacIO PCI driver attached to Paddington chipset
[ 0.777162] PM: Adding info for macio:0.80800000:mac-io
[ 0.777719] PM: Adding info for macio:0.00000010:interrup
[ 0.778252] PM: Adding info for macio:0.00013000:escc
[ 0.778903] PM: Adding info for macio:0.00014000:davbus
[ 0.779379] Can't request resource 0 for MacIO device 0.00000000:power-mg
[ 0.779728] PM: Adding info for macio:0.00000000:power-mg
[ 0.780339] PM: Adding info for macio:0.00016000:via-pmu
[ 0.781001] PM: Adding info for macio:0.00020000:ata-3
[ 0.781645] PM: Adding info for macio:0.00000034:media-ba
[ 0.782246] PM: Adding info for macio:0.00010000:scsi
[ 0.782894] PM: Adding info for macio:0.00011000:ethernet
[ 1.331839] PM: Adding info for No Bus:eth0
[ 1.332385] eth0: BMAC+ at 00:50:e4:d0:79:4e
[ 1.332974] PM: Adding info for macio:0.00015000:fdc
[ 1.333632] PM: Adding info for macio:0.00021000:ata-3
[ 1.334299] PM: Adding info for macio:0.00013020:ch-a
[ 1.335006] PM: Adding info for macio:0.00013000:ch-b
[ 1.335954] mediabay0: Registered Heathrow media-bay
[ 1.336216] mediabay0: powering down
[ 1.580272] PM: Adding info for No Bus:input0
[ 1.580718] input: Macintosh mouse button emulation as /class/input/input0
[ 1.581163] PM: Adding info for No Bus:pmu
[ 1.582042] pmubl: Backlight initialized (pmubl)
[ 1.582322] apm_emu: PMU APM Emulation initialized.
[ 1.583153] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 1.583455] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.584097] adb: starting probe task...
[ 2.610023] ide0: Found Apple Heathrow ATA controller, bus ID 0, irq 25
[ 2.610369] Probing IDE interface ide0...
[ 2.910195] hda: IBM-DBCA-206480, ATA DISK drive
[ 2.910489] PM: Adding info for No Bus:ide0
[ 3.630028] hda: selected mode 0x22
[ 3.630052] hda: Enabling MultiWord DMA 2
[ 3.631462] ide0 at 0xd5012000-0xd5012007,0xd5012160 on irq 25
[ 3.631810] PM: Adding info for ide:0.0
[ 3.632665] ide1: Found Apple Heathrow ATA controller, bus ID 1 (mediabay), irq 36
[ 3.643858] hda: max request size: 128KiB
[ 3.729562] adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f
[ 3.754885] ADB keyboard at 2, handler 1
[ 3.764529] Detected ADB keyboard, type ISO, swapping keys.
[ 3.774425] PM: Adding info for No Bus:input1
[ 3.774870] input: ADB keyboard as /class/input/input1
[ 3.785009] PM: Adding info for No Bus:input2
[ 3.785502] input: ADB Powerbook buttons as /class/input/input2
[ 3.805439] ADB mouse at 3, handler set to 4 (trackpad)
[ 3.871226] PM: Adding info for No Bus:input3
[ 3.871665] input: ADB mouse as /class/input/input3
[ 3.881528] adb: finished probe task...
[ 4.017305] hda: 12685680 sectors (6495 MB) w/420KiB Cache, CHS=13424/15/63, (U)DMA
[ 4.027135] hda: cache flushes not supported
[ 4.036920] hda: [mac] hda1 hda2 hda3 hda4
[ 4.083810] PM: Adding info for No Bus:usbmon0
[ 4.084128] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.084852] ohci_hcd 0000:00:0e.0: OHCI Host Controller
[ 4.095169] PM: Adding info for No Bus:usbmon1
[ 4.095513] ohci_hcd 0000:00:0e.0: new USB bus registered, assigned bus number 1
[ 4.105335] ohci_hcd 0000:00:0e.0: irq 28, io mem 0x80882000
[ 4.189364] PM: Adding info for usb:usb1
[ 4.190439] PM: Adding info for No Bus:usbdev1.1_ep00
[ 4.190850] usb usb1: configuration #1 chosen from 1 choice
[ 4.200771] PM: Adding info for usb:1-0:1.0
[ 4.201244] hub 1-0:1.0: USB hub found
[ 4.211222] hub 1-0:1.0: 2 ports detected
[ 4.330163] PM: Adding info for No Bus:usbdev1.1_ep81
[ 4.950165] usbcore: registered new interface driver libusual
[ 4.960146] PM: Adding info for No Bus:mice
[ 4.960582] PM: Adding info for No Bus:mouse0
[ 4.960983] PM: Adding info for No Bus:mouse1
[ 4.961349] PM: Adding info for No Bus:psaux
[ 4.961643] mice: PS/2 mouse device common for all mice
[ 4.971624] PM: Adding info for No Bus:event0
[ 4.972044] PM: Adding info for No Bus:event1
[ 4.972394] PM: Adding info for No Bus:event2
[ 4.972766] PM: Adding info for No Bus:event3
[ 4.973134] PM: Adding info for No Bus:ts0
[ 4.973489] PM: Adding info for No Bus:ts1
[ 4.973783] i2c /dev entries driver
[ 4.984627] PM: Adding info for No Bus:i2c-0
[ 4.984996] PM: Adding info for No Bus:i2c-0
[ 4.985324] PowerMac i2c bus pmu 2 registered
[ 4.995327] PM: Adding info for No Bus:i2c-1
[ 4.995804] PM: Adding info for No Bus:i2c-1
[ 4.996128] PowerMac i2c bus pmu 1 registered
[ 5.006199] Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC).
[ 5.016263] PM: Adding info for No Bus:timer
[ 5.016763] PM: Adding info for No Bus:sequencer
[ 5.017129] PM: Adding info for No Bus:sequencer2
[ 5.017901] PM: Adding info for No Bus:seq
[ 5.018664] PM: Adding info for platform:snd_powermac
[ 5.968107] PM: Adding info for No Bus:input4
[ 5.968590] input: PowerMac Beep as /class/input/input4
[ 5.978558] PM: Adding info for No Bus:event4
[ 5.979020] PM: Adding info for No Bus:pcmC0D0p
[ 5.979425] PM: Adding info for No Bus:pcmC0D0c
[ 5.979841] PM: Adding info for No Bus:dsp
[ 5.980286] PM: Adding info for No Bus:audio
[ 5.980696] PM: Adding info for No Bus:controlC0
[ 5.981167] PM: Adding info for No Bus:mixer
[ 5.982459] ALSA device list:
[ 5.992260] #0: PowerMac Screamer [PBG3] Rev 0
[ 6.002110] TCP cubic registered
[ 6.011717] NET: Registered protocol family 1
[ 6.089573] kjournald starting. Commit interval 5 seconds
[ 6.099240] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.108898] VFS: Mounted root (ext3 filesystem) readonly.
[ 6.118550] Freeing unused kernel memory: 184k init
[ 6.184978] PM: Adding info for No Bus:vcs1
[ 6.231732] PM: Adding info for No Bus:vcsa1
[ 21.952294] PCI: Enabling device 0000:00:13.0 (0000 -> 0002)
[ 21.962203] Yenta: CardBus bridge found at 0000:00:13.0 [0000:0000]
[ 21.972074] PCI: Bus 1, cardbus bridge: 0000:00:13.0
[ 21.981771] IO window: 00001400-000015ff
[ 21.991428] IO window: 00001800-000019ff
[ 22.000910] PREFETCH window: 80000000-803fffff
[ 22.010270] MEM window: 80400000-807fffff
[ 22.019463] Yenta: Enabling burst memory read transactions
[ 22.028649] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 22.037785] Yenta: Routing CardBus interrupts to PCI
[ 22.046920] Yenta TI: socket 0000:00:13.0, mfunc 0x00000002, devctl 0x60
[ 22.160069] Yenta: ISA IRQ mask 0x0000, PCI irq 22
[ 22.169278] Socket status: 30000086
[ 22.178373] pcmcia: parent PCI bridge I/O window: 0x0 - 0x7fffff
[ 22.187572] pcmcia: parent PCI bridge Memory window: 0x80000000 - 0xfcffffff
[ 22.196762] pcmcia: parent PCI bridge Memory window: 0xfd000000 - 0xfdffffff
[ 22.206139] PM: Adding info for No Bus:pcmcia_socket0
[ 24.711843] PM: Adding info for No Bus:vcs2
[ 24.721627] PM: Adding info for No Bus:vcsa2
[ 24.736384] PM: Removing info for No Bus:vcs2
[ 24.739836] PM: Removing info for No Bus:vcsa2
[ 24.747574] PM: Adding info for No Bus:vcs3
[ 24.750694] PM: Adding info for No Bus:vcsa3
[ 24.759518] PM: Removing info for No Bus:vcs3
[ 24.761042] PM: Removing info for No Bus:vcsa3
[ 24.766645] PM: Adding info for No Bus:vcs4
[ 24.816559] PM: Adding info for No Bus:vcsa4
[ 24.831416] PM: Removing info for No Bus:vcs4
[ 24.840354] PM: Removing info for No Bus:vcsa4
[ 24.847886] PM: Adding info for No Bus:vcs5
[ 24.850870] PM: Adding info for No Bus:vcsa5
[ 24.859671] PM: Removing info for No Bus:vcs5
[ 24.870823] PM: Removing info for No Bus:vcsa5
[ 24.876255] PM: Adding info for No Bus:vcs6
[ 24.879862] PM: Adding info for No Bus:vcsa6
[ 24.888828] PM: Removing info for No Bus:vcs6
[ 24.890582] PM: Removing info for No Bus:vcsa6
[ 25.618010] Adding 296900k swap on /dev/hda4. Priority:-1 extents:1 across:296900k
[ 26.316196] EXT3 FS on hda3, internal journal
[ 28.106720] loop: module loaded
[ 33.507736] phy registers:
[ 33.507767] 0800 7849 2000 5c10 01e1 45e1 0007 2801
[ 33.518133] 0000 0000 0000 0000 0000 0000 0000 0000
[ 33.528494] 2002 0000 0000 0000 0001 0000 0020 0000
[ 33.538855] 0000 0000 0180 0100 0006 0f00 0000 0000
[ 35.169864] NET: Registered protocol family 17
[ 35.950906] PM: Adding info for No Bus:vcs2
[ 35.960705] PM: Adding info for No Bus:vcsa2
[ 36.028044] PM: Removing info for No Bus:vcs2
[ 36.030836] PM: Removing info for No Bus:vcsa2
[ 36.057460] PM: Adding info for No Bus:vcs3
[ 36.067216] PM: Adding info for No Bus:vcsa3
[ 36.134593] PM: Removing info for No Bus:vcs3
[ 36.138065] PM: Removing info for No Bus:vcsa3
[ 36.163992] PM: Adding info for No Bus:vcs4
[ 36.173717] PM: Adding info for No Bus:vcsa4
[ 36.241096] PM: Removing info for No Bus:vcs4
[ 36.249961] PM: Removing info for No Bus:vcsa4
[ 36.270522] PM: Adding info for No Bus:vcs5
[ 36.280277] PM: Adding info for No Bus:vcsa5
[ 36.347476] PM: Removing info for No Bus:vcs5
[ 36.350471] PM: Removing info for No Bus:vcsa5
[ 36.416034] PM: Adding info for No Bus:vcs2
[ 36.425751] PM: Adding info for No Bus:vcsa2
[ 36.493100] PM: Removing info for No Bus:vcs2
[ 36.496571] PM: Removing info for No Bus:vcsa2
[ 36.522725] PM: Adding info for No Bus:vcs3
[ 36.532635] PM: Adding info for No Bus:vcsa3
[ 36.599901] PM: Removing info for No Bus:vcs3
[ 36.603422] PM: Removing info for No Bus:vcsa3
[ 36.630374] PM: Adding info for No Bus:vcs4
[ 36.640063] PM: Adding info for No Bus:vcsa4
[ 36.712159] PM: Removing info for No Bus:vcs4
[ 36.715625] PM: Removing info for No Bus:vcsa4
[ 36.738320] PM: Adding info for No Bus:vcs5
[ 36.741868] PM: Adding info for No Bus:vcsa5
[ 36.815380] PM: Removing info for No Bus:vcs5
[ 36.818857] PM: Removing info for No Bus:vcsa5
[ 36.845067] PM: Adding info for No Bus:vcs6
[ 36.854792] PM: Adding info for No Bus:vcsa6
[ 36.922330] PM: Removing info for No Bus:vcs6
[ 36.925803] PM: Removing info for No Bus:vcsa6
[ 46.843286] tsdev (compaq touchscreen emulation) is scheduled for removal.
[ 46.843312] See Documentation/feature-removal-schedule.txt for details.
[ 46.914937] tsdev (compaq touchscreen emulation) is scheduled for removal.
[ 46.914963] See Documentation/feature-removal-schedule.txt for details.
[ 58.165735] PM: Adding info for No Bus:vcs3
[ 58.170123] PM: Adding info for No Bus:vcsa3
[ 58.176554] PM: Adding info for No Bus:vcs4
[ 58.180472] PM: Adding info for No Bus:vcsa4
[ 58.207871] PM: Adding info for No Bus:vcs6
[ 58.218027] PM: Adding info for No Bus:vcsa6
[ 58.230146] PM: Adding info for No Bus:vcs5
[ 58.241753] PM: Adding info for No Bus:vcs2
[ 58.246045] PM: Adding info for No Bus:vcsa2
[ 58.254265] PM: Adding info for No Bus:vcsa5
*inserting PCMCIA card here*
[ 1245.750028] pccard: PCMCIA card inserted into slot 0
[ 1245.751674] cs: memory probe 0x80000000-0xfcffffff: excluding 0x80000000-0x81ffffff
[ 1246.001143] cs: memory probe 0xfd000000-0xfdffffff:Machine check in kernel mode.
[ 1246.002530] Caused by (from SRR1=49030): Transfer error ack signal
[ 1246.004242] Oops: Machine check, sig: 7 [#1]
[ 1246.004578] PowerMac
[ 1246.004697] Modules linked in: af_packet loop pcmcia firmware_class yenta_socket rsrc_nonstatic pcmcia_core
[ 1246.005219] NIP: d50381e4 LR: d50381b8 CTR: c00124d8
[ 1246.005447] REGS: d3a1fc90 TRAP: 0200 Not tainted (2.6.22-g2e3ee3d4)
[ 1246.005727] MSR: 00049030 <EE,ME,IR,DR> CR: 82004024 XER: 00000000
[ 1246.006113] TASK = d3f2b1c0[1645] 'pccardd' THREAD: d3a1e000
[ 1246.006334] GPR00: 000000ff d3a1fd40 d3f2b1c0 00000000 d502a014 00000070 00000002 d3a1fd99
[ 1246.006808] GPR08: d5029000 d5028000 d5028000 00001000 22000022 00000000 d5030000 00080000
[ 1246.007284] GPR16: 00200000 00000002 d3fda9c0 01000000 fd000000 d3fda9c0 fd000000 000004fb
[ 1246.007759] GPR24: 00000002 d3a1fd99 00000021 c07bdc28 00000000 00000000 00000002 d3a1fd99
[ 1246.008263] NIP [d50381e4] pcmcia_read_cis_mem+0x1e4/0x2d8 [pcmcia_core]
[ 1246.008631] LR [d50381b8] pcmcia_read_cis_mem+0x1b8/0x2d8 [pcmcia_core]
[ 1246.008948] Call Trace:
[ 1246.009079] [d3a1fd40] [d50381b8] pcmcia_read_cis_mem+0x1b8/0x2d8 [pcmcia_core] (unreliable)
[ 1246.009492] [d3a1fd70] [d5038440] read_cis_cache+0x168/0x16c [pcmcia_core]
[ 1246.009826] [d3a1fd90] [d50385e8] pccard_get_next_tuple+0x100/0x48c [pcmcia_core]
[ 1246.010250] [d3a1fdd0] [d5038a0c] pccard_get_first_tuple+0x98/0x144 [pcmcia_core]
[ 1246.010615] [d3a1fe00] [d5038c10] pccard_validate_cis+0xa0/0x234 [pcmcia_core]
[ 1246.010963] [d3a1fe30] [d502d084] readable+0x4c/0xa0 [rsrc_nonstatic]
[ 1246.011283] [d3a1fe50] [d502e3f0] pcmcia_nonstatic_validate_mem+0x360/0x3d8 [rsrc_nonstatic]
[ 1246.011664] [d3a1fec0] [d5039174] pcmcia_validate_mem+0x28/0x40 [pcmcia_core]
[ 1246.012017] [d3a1fed0] [d5062ec4] pcmcia_card_add+0x24/0x16c [pcmcia]
[ 1246.012356] [d3a1ff40] [d50631d8] ds_event+0xd4/0x100 [pcmcia]
[ 1246.012649] [d3a1ff60] [d50357bc] send_event+0xbc/0xf0 [pcmcia_core]
[ 1246.012982] [d3a1ff80] [d5035a6c] socket_insert+0xe0/0x188 [pcmcia_core]
[ 1246.013307] [d3a1ff90] [d50365f0] pccardd+0x278/0x2c8 [pcmcia_core]
[ 1246.013620] [d3a1ffd0] [c0046900] kthread+0x84/0x8c
[ 1246.013882] [d3a1fff0] [c0011434] kernel_thread+0x44/0x60
[ 1246.014167] Instruction dump:
[ 1246.014329] 4bffe831 7c691b79 41820104 817b00ec 380bffff 7d095a14 7fa30038 7d491a14
[ 1246.014772] 7f885000 41beffc4 7c0004ac 7c0918ae <0c000000> 4c00012c 34beffff 981f0000
(.config attached)
Help?
--
Rutger Nijlunsing ---------------------------------- eludias ed dse.nl
never attribute to a conspiracy which can be explained by incompetence
----------------------------------------------------------------------
[-- Attachment #2: .config --]
[-- Type: text/plain, Size: 39383 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.22
# Sat Jul 21 23:02:35 2007
#
# CONFIG_PPC64 is not set
#
# Processor support
#
CONFIG_6xx=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
# CONFIG_PPC_UDBG_16550 is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set
# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_EMBEDDED6xx is not set
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_PPC_MPC52xx is not set
# CONFIG_PPC_MPC5200 is not set
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_LITE5200 is not set
CONFIG_PPC_PMAC=y
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
CONFIG_PPC_NATIVE=y
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
CONFIG_PPC_MPC106=y
# CONFIG_PPC_970_NAP is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPU Frequency drivers
#
CONFIG_CPU_FREQ_PMAC=y
# CONFIG_PPC601_SYNC_FIX is not set
CONFIG_TAU=y
# CONFIG_TAU_INT is not set
# CONFIG_TAU_AVERAGE is not set
# CONFIG_CPM2 is not set
#
# Kernel options
#
# CONFIG_HIGHMEM is not set
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_KEXEC is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_PM=y
CONFIG_PM_LEGACY=y
CONFIG_PM_DEBUG=y
# CONFIG_DISABLE_CONSOLE_SUSPEND is not set
# CONFIG_SOFTWARE_SUSPEND is not set
CONFIG_APM_EMULATION=y
# CONFIG_SECCOMP is not set
# CONFIG_WANT_DEVICE_TREE is not set
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
# CONFIG_PPC_INDIRECT_PCI_BE is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_DEBUG=y
#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=m
CONFIG_PCMCIA_DEBUG=y
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=m
# CONFIG_HOTPLUG_PCI is not set
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_BOOT_LOAD=0x00800000
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK_ENABLED=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
# CONFIG_NF_CONNTRACK_MARK is not set
# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
# CONFIG_NF_CONNTRACK_FTP is not set
# CONFIG_NF_CONNTRACK_H323 is not set
# CONFIG_NF_CONNTRACK_IRC is not set
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
# CONFIG_NF_CONNTRACK_SIP is not set
# CONFIG_NF_CONNTRACK_TFTP is not set
# CONFIG_NF_CT_NETLINK is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
CONFIG_NETFILTER_XT_MATCH_MAC=m
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_STATE is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
#
# IP: Netfilter Configuration
#
# CONFIG_NF_CONNTRACK_IPV4 is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
# CONFIG_IP_NF_TARGET_TOS is not set
# CONFIG_IP_NF_TARGET_ECN is not set
# CONFIG_IP_NF_TARGET_TTL is not set
CONFIG_IP_NF_RAW=m
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Wireless
#
CONFIG_CFG80211=m
CONFIG_WIRELESS_EXT=y
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_MAC_FLOPPY is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_DELKIN=m
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SL82C105 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDE_PMAC=y
# CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST is not set
CONFIG_BLK_DEV_IDEDMA_PMAC=y
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_MESH is not set
# CONFIG_SCSI_MAC53C94 is not set
# CONFIG_SCSI_SRP is not set
#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_ADB=y
CONFIG_ADB_CUDA=y
CONFIG_ADB_PMU=y
CONFIG_ADB_PMU_LED=y
CONFIG_ADB_PMU_LED_IDE=y
CONFIG_PMAC_APM_EMU=y
CONFIG_PMAC_MEDIABAY=y
CONFIG_PMAC_BACKLIGHT=y
CONFIG_PMAC_BACKLIGHT_LEGACY=y
CONFIG_INPUT_ADBHID=y
CONFIG_MAC_EMUMOUSEBTN=y
# CONFIG_THERM_WINDTUNNEL is not set
CONFIG_THERM_ADT746X=m
CONFIG_WINDFARM=m
CONFIG_ANSLCD=y
# CONFIG_PMAC_RACKMETER is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
# CONFIG_ICPLUS_PHY is not set
CONFIG_FIXED_PHY=m
# CONFIG_FIXED_MII_10_FDX is not set
CONFIG_FIXED_MII_100_FDX=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_MACE=m
# CONFIG_MACE_AAUI_PORT is not set
CONFIG_BMAC=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_AIRO is not set
CONFIG_HERMES=m
# CONFIG_APPLE_AIRPORT is not set
# CONFIG_PLX_HERMES is not set
# CONFIG_TMD_HERMES is not set
# CONFIG_NORTEL_HERMES is not set
CONFIG_PCI_HERMES=m
# CONFIG_ATMEL is not set
# CONFIG_PCMCIA_HERMES is not set
# CONFIG_PCMCIA_SPECTRUM is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
# CONFIG_HOSTAP_PLX is not set
# CONFIG_HOSTAP_PCI is not set
CONFIG_HOSTAP_CS=m
# CONFIG_BCM43XX is not set
# CONFIG_ZD1211RW is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_TSDEV=y
CONFIG_INPUT_TSDEV_SCREEN_X=1024
CONFIG_INPUT_TSDEV_SCREEN_Y=768
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=m
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_DIGIEPCA=m
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
# CONFIG_MOXA_SMARTIO_NEW is not set
# CONFIG_ISI is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
# CONFIG_SYNCLINK_GT is not set
CONFIG_N_HDLC=m
CONFIG_RISCOM8=m
CONFIG_SPECIALIX=m
# CONFIG_SPECIALIX_RTSCTS is not set
CONFIG_SX=m
CONFIG_RIO=m
CONFIG_RIO_OLDPCI=y
CONFIG_STALDRV=y
CONFIG_STALLION=m
CONFIG_ISTALLION=m
#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_PCI=m
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=48
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_PMACZILOG=y
# CONFIG_SERIAL_PMACZILOG_CONSOLE is not set
CONFIG_SERIAL_JSM=m
CONFIG_SERIAL_OF_PLATFORM=m
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_HW_RANDOM=y
CONFIG_NVRAM=y
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_AGP is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_POWERMAC=y
# CONFIG_I2C_MPC is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_M41T00 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
#
# Multifunction device drivers
#
CONFIG_MFD_SM501=m
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set
#
# Graphics support
#
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_LCD_CLASS_DEVICE=y
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
# CONFIG_VGASTATE is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_OF=y
CONFIG_FB_CONTROL=y
CONFIG_FB_PLATINUM=y
CONFIG_FB_VALKYRIE=y
# CONFIG_FB_CT65550 is not set
CONFIG_FB_ASILIANT=y
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
CONFIG_FB_ATY128=y
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
#
# ALSA PowerMac devices
#
CONFIG_SND_POWERMAC=y
CONFIG_SND_POWERMAC_AUTO_DRC=y
#
# Apple Onboard Audio driver
#
# CONFIG_SND_AOA is not set
# CONFIG_SND_AOA_SOUNDBUS is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT_POWERBOOK=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
CONFIG_USB_LCD=m
# CONFIG_USB_BERRY_CHARGE is not set
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
#
# LED devices
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_INFINIBAND is not set
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
#
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_DEBUGGER=y
CONFIG_XMON=y
# CONFIG_XMON_DEFAULT is not set
CONFIG_XMON_DISASSEMBLY=y
# CONFIG_BDI_SWITCH is not set
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_MANAGER=m
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_NULL=m
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_HW=y
^ permalink raw reply
* [PATCH] Re: 2.6.22-git hangs during boot on PowerBook G3 in 0.0 seconds
From: Rutger Nijlunsing @ 2007-07-21 21:28 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <20070721192143.GA12144@nospam.com>
On Sat, Jul 21, 2007 at 09:21:43PM +0200, Rutger Nijlunsing wrote:
> Hi,
>
> I'm trying to boot a new git kernel (2.6.22-g589f1e81), but it hangs
> very early (the timestamp is still on 0.000000).
After hours bisecting, I found the one-liner which results in the
hang. Now it takes someone else to find out _why_ it causes a hang :)
>From 6c13e1b55c1f87ed19f3c4623de3df881779edd7 Mon Sep 17 00:00:00 2001
From: Rutger Nijlunsing <git-commit@tux.tmfweb.nl>
Date: Sat, 21 Jul 2007 23:01:22 +0200
Subject: [PATCH] Revert "[POWERPC] Don't complain if size-cells == 0 in prom_parse()"
Status: RO
Content-Length: 866
Lines: 24
After hours of fun git bisecting, finally found the commit to revert
to make my PowerBook G3 Lombard boot again. This does not result in
the complains the reverted commit was revering to.
This reverts commit fd6e9d3945ee122eb513ada8b17296d243c1ce5e.
---
arch/powerpc/kernel/prom_parse.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index 3786dcc..b5c96af 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -24,7 +24,7 @@
/* Max address size we deal with */
#define OF_MAX_ADDR_CELLS 4
#define OF_CHECK_COUNTS(na, ns) ((na) > 0 && (na) <= OF_MAX_ADDR_CELLS && \
- (ns) >= 0)
+ (ns) > 0)
static struct of_bus *of_match_bus(struct device_node *np);
static int __of_address_to_resource(struct device_node *dev,
--
1.5.2.2
--
Rutger Nijlunsing ---------------------------------- eludias ed dse.nl
never attribute to a conspiracy which can be explained by incompetence
----------------------------------------------------------------------
^ permalink raw reply related
* 2.6.22-git hangs during boot on PowerBook G3 in 0.0 seconds
From: Rutger Nijlunsing @ 2007-07-21 19:21 UTC (permalink / raw)
To: linuxppc-dev
[-- Attachment #1: Type: text/plain, Size: 1243 bytes --]
Hi,
I'm trying to boot a new git kernel (2.6.22-g589f1e81), but it hangs
very early (the timestamp is still on 0.000000).
All messages on screen (typed in, don't have a digital camera...):
[ 0.000000] Using PowerMac machine description
[ 0.000000] Total memory = 320MB; using 1024kB for hash table (at cff00000)
[ 0.000000] Linux version 2.6.22-g589f1e81 (rutger@wingding) (gcc version 4.0.2) #9 Sat Jul 21 18:48:07 CEST 2007
[ 0.000000] Found a Paddington mac-io controller, rev: 0, mapped at 0xfdf80000
[ 0.000000] PowerMac motherboard: PowerBook 101 (Lombard)
[ 0.000000] PMU driver v2 initialized for 1999 Powerbook G3, firmware: 0b
[ 0.000000] console [udbg0] enabled
setup_arch: bootmem
[ 0.000000] Found Grackle (MPC106) PCI host bridge at 0x0000000080000000. Firmware bus number: 0->0
*hang*
Remarks:
- 2.6.22-rc4 also hangs
- compiled with gcc 4.1.2 (prerelease in Debian unstable) also hangs
- 2.6.21-g9f90b997 does not hang
.config attached.
Known problem?
Any one any ideas?
--
Rutger Nijlunsing ---------------------------------- eludias ed dse.nl
never attribute to a conspiracy which can be explained by incompetence
----------------------------------------------------------------------
[-- Attachment #2: .config --]
[-- Type: text/plain, Size: 39472 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.22
# Sat Jul 21 16:59:41 2007
#
# CONFIG_PPC64 is not set
#
# Processor support
#
CONFIG_6xx=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
# CONFIG_PPC_UDBG_16550 is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set
# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_EMBEDDED6xx is not set
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_PPC_MPC52xx is not set
# CONFIG_PPC_MPC5200 is not set
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_LITE5200 is not set
CONFIG_PPC_PMAC=y
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
CONFIG_PPC_NATIVE=y
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
CONFIG_PPC_MPC106=y
# CONFIG_PPC_970_NAP is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPU Frequency drivers
#
CONFIG_CPU_FREQ_PMAC=y
# CONFIG_PPC601_SYNC_FIX is not set
CONFIG_TAU=y
# CONFIG_TAU_INT is not set
# CONFIG_TAU_AVERAGE is not set
# CONFIG_CPM2 is not set
#
# Kernel options
#
# CONFIG_HIGHMEM is not set
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_KEXEC is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_PM=y
CONFIG_PM_LEGACY=y
CONFIG_PM_DEBUG=y
# CONFIG_DISABLE_CONSOLE_SUSPEND is not set
# CONFIG_SOFTWARE_SUSPEND is not set
CONFIG_APM_EMULATION=y
# CONFIG_SECCOMP is not set
# CONFIG_WANT_DEVICE_TREE is not set
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
# CONFIG_PPC_INDIRECT_PCI_BE is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_DEBUG=y
#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=m
CONFIG_PCMCIA_DEBUG=y
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=m
# CONFIG_HOTPLUG_PCI is not set
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_BOOT_LOAD=0x00800000
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK_ENABLED=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
# CONFIG_NF_CONNTRACK_MARK is not set
# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
# CONFIG_NF_CONNTRACK_FTP is not set
# CONFIG_NF_CONNTRACK_H323 is not set
# CONFIG_NF_CONNTRACK_IRC is not set
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
# CONFIG_NF_CONNTRACK_SIP is not set
# CONFIG_NF_CONNTRACK_TFTP is not set
# CONFIG_NF_CT_NETLINK is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
CONFIG_NETFILTER_XT_TARGET_TRACE=m
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
CONFIG_NETFILTER_XT_MATCH_MAC=m
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_STATE is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
#
# IP: Netfilter Configuration
#
# CONFIG_NF_CONNTRACK_IPV4 is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
# CONFIG_IP_NF_TARGET_TOS is not set
# CONFIG_IP_NF_TARGET_ECN is not set
# CONFIG_IP_NF_TARGET_TTL is not set
CONFIG_IP_NF_RAW=m
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Wireless
#
CONFIG_CFG80211=m
CONFIG_WIRELESS_EXT=y
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_MAC_FLOPPY is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_DELKIN=m
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SL82C105 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDE_PMAC=y
# CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST is not set
CONFIG_BLK_DEV_IDEDMA_PMAC=y
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_MESH is not set
# CONFIG_SCSI_MAC53C94 is not set
# CONFIG_SCSI_SRP is not set
#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_ADB=y
CONFIG_ADB_CUDA=y
CONFIG_ADB_PMU=y
CONFIG_ADB_PMU_LED=y
CONFIG_ADB_PMU_LED_IDE=y
CONFIG_PMAC_APM_EMU=y
CONFIG_PMAC_MEDIABAY=y
CONFIG_PMAC_BACKLIGHT=y
CONFIG_PMAC_BACKLIGHT_LEGACY=y
CONFIG_INPUT_ADBHID=y
CONFIG_MAC_EMUMOUSEBTN=y
# CONFIG_THERM_WINDTUNNEL is not set
CONFIG_THERM_ADT746X=m
CONFIG_WINDFARM=m
CONFIG_ANSLCD=y
# CONFIG_PMAC_RACKMETER is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
# CONFIG_ICPLUS_PHY is not set
CONFIG_FIXED_PHY=m
# CONFIG_FIXED_MII_10_FDX is not set
CONFIG_FIXED_MII_100_FDX=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_MACE=m
# CONFIG_MACE_AAUI_PORT is not set
CONFIG_BMAC=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_AIRO is not set
CONFIG_HERMES=m
# CONFIG_APPLE_AIRPORT is not set
# CONFIG_PLX_HERMES is not set
# CONFIG_TMD_HERMES is not set
# CONFIG_NORTEL_HERMES is not set
CONFIG_PCI_HERMES=m
# CONFIG_ATMEL is not set
# CONFIG_PCMCIA_HERMES is not set
# CONFIG_PCMCIA_SPECTRUM is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
# CONFIG_HOSTAP_PLX is not set
# CONFIG_HOSTAP_PCI is not set
CONFIG_HOSTAP_CS=m
# CONFIG_BCM43XX is not set
# CONFIG_ZD1211RW is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_TSDEV=y
CONFIG_INPUT_TSDEV_SCREEN_X=1024
CONFIG_INPUT_TSDEV_SCREEN_Y=768
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=m
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_DIGIEPCA=m
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
# CONFIG_MOXA_SMARTIO_NEW is not set
# CONFIG_ISI is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
# CONFIG_SYNCLINK_GT is not set
CONFIG_N_HDLC=m
CONFIG_RISCOM8=m
CONFIG_SPECIALIX=m
# CONFIG_SPECIALIX_RTSCTS is not set
CONFIG_SX=m
CONFIG_RIO=m
CONFIG_RIO_OLDPCI=y
CONFIG_STALDRV=y
CONFIG_STALLION=m
CONFIG_ISTALLION=m
#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_PCI=m
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=48
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_PMACZILOG=y
# CONFIG_SERIAL_PMACZILOG_CONSOLE is not set
CONFIG_SERIAL_JSM=m
CONFIG_SERIAL_OF_PLATFORM=m
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_HW_RANDOM=y
CONFIG_NVRAM=y
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_AGP is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_POWERMAC=y
# CONFIG_I2C_MPC is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_M41T00 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
CONFIG_APM_POWER=y
# CONFIG_BATTERY_DS2760 is not set
CONFIG_BATTERY_PMU=y
# CONFIG_HWMON is not set
#
# Multifunction device drivers
#
CONFIG_MFD_SM501=m
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set
#
# Graphics support
#
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_LCD_CLASS_DEVICE=y
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
# CONFIG_VGASTATE is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_OF=y
CONFIG_FB_CONTROL=y
CONFIG_FB_PLATINUM=y
CONFIG_FB_VALKYRIE=y
# CONFIG_FB_CT65550 is not set
CONFIG_FB_ASILIANT=y
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
CONFIG_FB_ATY128=y
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
#
# ALSA PowerMac devices
#
CONFIG_SND_POWERMAC=y
CONFIG_SND_POWERMAC_AUTO_DRC=y
#
# Apple Onboard Audio driver
#
# CONFIG_SND_AOA is not set
# CONFIG_SND_AOA_SOUNDBUS is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT_POWERBOOK=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
CONFIG_USB_LCD=m
# CONFIG_USB_BERRY_CHARGE is not set
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
#
# LED devices
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_INFINIBAND is not set
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
#
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_DEBUGGER=y
CONFIG_XMON=y
# CONFIG_XMON_DEFAULT is not set
CONFIG_XMON_DISASSEMBLY=y
# CONFIG_BDI_SWITCH is not set
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_MANAGER=m
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_NULL=m
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_HW=y
^ permalink raw reply
* Re: ML403 / ALSA driver for AC97 Controller
From: Grant Likely @ 2007-07-21 20:17 UTC (permalink / raw)
To: Joachim Förster; +Cc: linuxppc-embedded
In-Reply-To: <1185047879.15040.34.camel@localhost>
On 7/21/07, Joachim F=F6rster <mls.JOFT@gmx.de> wrote:
> Hi all,
Thanks Joachim, this is interesting work. I'd like to see this get
into mainline.
A few initial comments:
1. You should post this code as a patch against the kernel tree.
Links to tarballs are not the best way to get code reviewed. Post
your patches to both the ALSA and linuxppc-dev mailing lists.
2. (get this out of the way quickly) Coding standard doesn't match the
kernel (indent w/ tabs, keep lines < 80 chars, etc). You should run
your code through 'scripts/Lindent' in the kernel tree. That will
sort out many of the whitespace issues.
3. In the same vein, c++ style comments need to be scrubbed.
4. Do not directly include xparameters.h in your driver. The driver
should get it's data from the platform bus registration (of the
of_device registration when we move to arch/powerpc).
5. struct 'platform_device devices[]' needs to be moved to
arch/ppc/sysdev/virtex_devices.c
6. Have you looked into the new ALSA infrastructure which separates
Codecs from controllers (in sound/soc)? It might be a good idea to go
that route for this driver.
That being said, it looks like good work. Please cc me when you send
the next version.
Thanks,
g.
---
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
grant.likely@secretlab.ca
(403) 399-0195
^ permalink raw reply
* Re: [PATCH v3] pcmcia: CompactFlash driver for PA Semi Electra boards
From: Olof Johansson @ 2007-07-21 20:18 UTC (permalink / raw)
To: Andrew Morton
Cc: Christoph Hellwig, linuxppc-dev, linux-pcmcia, linux-kernel,
miltonm
In-Reply-To: <20070720164823.95608e43.akpm@linux-foundation.org>
On Fri, Jul 20, 2007 at 04:48:23PM -0700, Andrew Morton wrote:
> > Who's maintaining PCMCIA? MAINTAINERS only lists a mailing list, no person. Seems
> > weird for a component that's marked as maintained.
>
> Dominik Brodowski. He's having a bit of downtime at present (exams, I
> think). He expects to return. Meanwhile, cc'ing me usually has some
> effect.
Thanks!
> > +static const char driver_name[] = "electra-cf";
> >
> > ...
> >
> > +static struct of_device_id electra_cf_match[] =
> > +{
> > + {
> > + .compatible = "electra-cf",
> > + },
> > + {},
> > +};
>
> Could have reused driver_name[] here, if that was appropriate.
Driver name and device tree compatible field is not neccessarily the same,
even though they do coincide here.
> > --- mainline.orig/arch/powerpc/platforms/pasemi/setup.c
> > +++ mainline/arch/powerpc/platforms/pasemi/setup.c
>
> I never know who maintains random-scruffy-ppc code like this. From a peek
> in the git-whatchanged output, it appears to be yourself.
Check the top of the file. :) (Kumar started doing that, I kept it up,
seems useful). And yes, we do tend to have per-platform maintainers
on ppc.
> Have a few little fixies:
Thanks!
Acked-by: Olof Johansson <olof@lixom.net>
> --- a/drivers/pcmcia/electra_cf.c~pcmcia-compactflash-driver-for-pa-semi-electra-boards-fix
> +++ a/drivers/pcmcia/electra_cf.c
[...]
^ permalink raw reply
* ML403 / ALSA driver for AC97 Controller
From: Joachim Förster @ 2007-07-21 19:57 UTC (permalink / raw)
To: linuxppc-embedded
Hi all,
some days ago I "finished" a first working version of my ALSA driver for
Xilinx' AC97 Controller Reference ip core, usually used on Xilinx' ML403
board. In fact it's a kind of byproduct of another project I am
currently working on.
Anybody interested in the driver may download it here:
http://www.esic-solutions.com/support.html
The version number 0.0.1-pre1 indicates, that it is a kind of (early)
prerelease, which might be far from a "complete" state. So, if you have
any problems with it, feel free to mail me (JOFT@gmx.de). Or, if there
are any suggestions, opinions, special experience ... etc., let me know
it.
The tar file contains a README, with all relevant info - I hope I didn't
forget something important. Just one thing: Capture support basically
works, but there are overruns after ~30s with rates > ~20kHz at least on
the board and setup I'm working on => consider this to be a know bug.
Playback support (which was the primary goal) seems to be pretty stable.
I thought it would be a good idea to publish the driver, because over
the last few months, there were - not much - but several mails on this
list on sound support for the ML403.
Joachim
^ permalink raw reply
* Re: [PATCH] Fix tas_suspend/resume build warning
From: Johannes Berg @ 2007-07-21 17:29 UTC (permalink / raw)
To: Stephen Rothwell; +Cc: Takashi Iwai, linuxppc-dev, alsa-devel, Andrew Morton
In-Reply-To: <20070722002937.11e234f8.sfr@canb.auug.org.au>
On Sun, 2007-07-22 at 00:29 +1000, Stephen Rothwell wrote:
> sound/aoa/codecs/snd-aoa-codec-tas.c:750: warning: 'tas_suspend' defined but not used
> sound/aoa/codecs/snd-aoa-codec-tas.c:760: warning: 'tas_resume' defined but not used
Heh. I daresay I never compiled a kernel without PM. Not sure why you'd
want to, but still good to have it fixed. Thanks.
[full copy below for Takashi, I suppose it'll go through his tree]
From: Stephen Rothwell <sfr@canb.auug.org.au>
Subject: Fix tas_suspend/resume build warning
sound/aoa/codecs/snd-aoa-codec-tas.c:750: warning: 'tas_suspend' defined but not used
sound/aoa/codecs/snd-aoa-codec-tas.c:760: warning: 'tas_resume' defined but not used
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
---
sound/aoa/codecs/snd-aoa-codec-tas.c | 9 +++++----
1 files changed, 5 insertions(+), 4 deletions(-)
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
diff --git a/sound/aoa/codecs/snd-aoa-codec-tas.c b/sound/aoa/codecs/snd-aoa-codec-tas.c
index 2f771f5..3cbfe46 100644
--- a/sound/aoa/codecs/snd-aoa-codec-tas.c
+++ b/sound/aoa/codecs/snd-aoa-codec-tas.c
@@ -743,6 +743,7 @@ static int tas_switch_clock(struct codec_info_item *cii, enum clock_switch clock
return 0;
}
+#ifdef CONFIG_PM
/* we are controlled via i2c and assume that is always up
* If that wasn't the case, we'd have to suspend once
* our i2c device is suspended, and then take note of that! */
@@ -768,7 +769,6 @@ static int tas_resume(struct tas *tas)
return 0;
}
-#ifdef CONFIG_PM
static int _tas_suspend(struct codec_info_item *cii, pm_message_t state)
{
return tas_suspend(cii->codec_data);
@@ -778,7 +778,10 @@ static int _tas_resume(struct codec_info_item *cii)
{
return tas_resume(cii->codec_data);
}
-#endif
+#else /* CONFIG_PM */
+#define _tas_suspend NULL
+#define _tas_resume NULL
+#endif /* CONFIG_PM */
static struct codec_info tas_codec_info = {
.transfers = tas_transfers,
@@ -791,10 +794,8 @@ static struct codec_info tas_codec_info = {
.owner = THIS_MODULE,
.usable = tas_usable,
.switch_clock = tas_switch_clock,
-#ifdef CONFIG_PM
.suspend = _tas_suspend,
.resume = _tas_resume,
-#endif
};
static int tas_init_codec(struct aoa_codec *codec)
^ permalink raw reply related
* Re: [PATCH][12/37] Clean up duplicate includes in drivers/net/
From: Chris Snook @ 2007-07-21 16:50 UTC (permalink / raw)
To: Jesper Juhl
Cc: info, Luke Yang, Judy Fischbach, Patrick McHardy, bonding-devel,
Bryan Wu, kong.lai, Jay Vosburgh, James Morris, linuxppc-embedded,
Alexey Kuznetsov, Alex V Lasso, Ulrich Kunitz, Chad Tindel,
Amit S Kale, Jay Cliburn, Samuel Ortiz, Daniel Drake, Brian Pugh,
viro, alexandre.bounine, Pantelis Antoniou, netdev,
linux-wireless, Linux Kernel Mailing List, Ralf Baechle,
Vitaly Bordug, Lukasz Stelmach, Ron Mercer, atl1-devel,
Andrew Morton, David S. Miller, James P Ketrenos
In-Reply-To: <9a8748490707210948k468f8f32k718d84279aa56ce9@mail.gmail.com>
Jesper Juhl wrote:
> On 21/07/07, Chris Snook <csnook@redhat.com> wrote:
>> Jesper Juhl wrote:
>> > Hi,
>> >
>> > This patch cleans up duplicate includes in
>> > drivers/net/
>> >
>> >
>> > Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
>> > ---
>> >
>> > diff --git a/drivers/net/atl1/atl1_main.c
>> b/drivers/net/atl1/atl1_main.c
>> > index fd1e156..4a18b88 100644
>> > --- a/drivers/net/atl1/atl1_main.c
>> > +++ b/drivers/net/atl1/atl1_main.c
>> > @@ -75,7 +75,6 @@
>> > #include <linux/compiler.h>
>> > #include <linux/delay.h>
>> > #include <linux/mii.h>
>> > -#include <linux/interrupt.h>
>> > #include <net/checksum.h>
>> >
>> > #include <asm/atomic.h>
>>
>> Define "duplicate". I ask because this patch just got posted a few
>> days ago:
>>
>
> duplicate == present more than once in the same source file.
> Did you try looking at the includes in the source file the patch modifies?
Nope! Mea Culpa.
-- Chris
^ permalink raw reply
* Re: [PATCH][12/37] Clean up duplicate includes in drivers/net/
From: Jesper Juhl @ 2007-07-21 16:48 UTC (permalink / raw)
To: Chris Snook
Cc: info, Luke Yang, Judy Fischbach, Patrick McHardy, bonding-devel,
Bryan Wu, kong.lai, Jay Vosburgh, James Morris, linuxppc-embedded,
Alexey Kuznetsov, Alex V Lasso, Ulrich Kunitz, Chad Tindel,
Amit S Kale, Jay Cliburn, Samuel Ortiz, Daniel Drake, Brian Pugh,
viro, alexandre.bounine, Pantelis Antoniou, netdev,
linux-wireless, Linux Kernel Mailing List, Ralf Baechle,
Vitaly Bordug, Lukasz Stelmach, Ron Mercer, atl1-devel,
Andrew Morton, David S. Miller, James P Ketrenos
In-Reply-To: <46A236FC.2080300@redhat.com>
On 21/07/07, Chris Snook <csnook@redhat.com> wrote:
> Jesper Juhl wrote:
> > Hi,
> >
> > This patch cleans up duplicate includes in
> > drivers/net/
> >
> >
> > Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
> > ---
> >
> > diff --git a/drivers/net/atl1/atl1_main.c b/drivers/net/atl1/atl1_main.c
> > index fd1e156..4a18b88 100644
> > --- a/drivers/net/atl1/atl1_main.c
> > +++ b/drivers/net/atl1/atl1_main.c
> > @@ -75,7 +75,6 @@
> > #include <linux/compiler.h>
> > #include <linux/delay.h>
> > #include <linux/mii.h>
> > -#include <linux/interrupt.h>
> > #include <net/checksum.h>
> >
> > #include <asm/atomic.h>
>
> Define "duplicate". I ask because this patch just got posted a few days ago:
>
duplicate == present more than once in the same source file.
Did you try looking at the includes in the source file the patch modifies?
> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
> ---
> drivers/net/atl1/atl1_main.c | 1 +
> 1 files changed, 1 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/net/atl1/atl1_main.c b/drivers/net/atl1/atl1_main.c
> index 4a18b88..fd1e156 100644
> --- a/drivers/net/atl1/atl1_main.c
> +++ b/drivers/net/atl1/atl1_main.c
> @@ -75,6 +75,7 @@
> #include <linux/compiler.h>
> #include <linux/delay.h>
> #include <linux/mii.h>
> +#include <linux/interrupt.h>
> #include <net/checksum.h>
>
> #include <asm/atomic.h>
>
> I've always been under the impression that one should include all the files
> whose contents you use directly, because other includes that happen to include
> them might no longer need to in the future and cease including them.
I agree completely. But that's completely beside the point here.
Before Al's patch, drivers/net/atl1/atl1_main.c already contained
"#include <linux/interrupt.h>".
> You can
> fight it out with Al if you feel like it. I'm keeping the rest of the CC list
> because the other maintainers might have similar feelings about the
> appropriateness of these includes in their drivers.
>
Take a look at the file. These are the includes at the top of
drivers/net/atl1/atl1_main.c :
...
#include <linux/types.h>
#include <linux/netdevice.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/skbuff.h>
#include <linux/etherdevice.h>
#include <linux/if_vlan.h>
#include <linux/irqreturn.h>
#include <linux/workqueue.h>
#include <linux/timer.h>
#include <linux/jiffies.h>
#include <linux/hardirq.h>
#include <linux/interrupt.h> <--- Here we have linux/interrupt.h
#include <linux/irqflags.h>
#include <linux/dma-mapping.h>
#include <linux/net.h>
#include <linux/pm.h>
#include <linux/in.h>
#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/compiler.h>
#include <linux/delay.h>
#include <linux/mii.h>
#include <linux/interrupt.h> <--- And here we include it again.
#include <net/checksum.h>
#include <asm/atomic.h>
#include <asm/byteorder.h>
#include "atl1.h"
...
Now please tell me why it makes sense to include the same header twice
and why my patch that removes the duplicate does not make sense.
--
Jesper Juhl <jesper.juhl@gmail.com>
Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please http://www.expita.com/nomime.html
^ permalink raw reply
* Re: [PATCH][12/37] Clean up duplicate includes in drivers/net/
From: Al Viro @ 2007-07-21 16:46 UTC (permalink / raw)
To: Chris Snook
Cc: info, Patrick McHardy, Judy Fischbach, Luke Yang, bonding-devel,
Bryan Wu, kong.lai, Jay Vosburgh, James Morris, linuxppc-embedded,
Alexey Kuznetsov, Alex V Lasso, Ulrich Kunitz, Chad Tindel,
Amit S Kale, Jay Cliburn, Samuel Ortiz, Brian Pugh, Daniel Drake,
alexandre.bounine, Pantelis Antoniou, netdev, Jesper Juhl,
linux-wireless, Linux Kernel Mailing List, Ralf Baechle,
Vitaly Bordug, Lukasz Stelmach, Ron Mercer, atl1-devel,
Andrew Morton, David S. Miller, James P Ketrenos
In-Reply-To: <46A236FC.2080300@redhat.com>
On Sat, Jul 21, 2007 at 12:40:28PM -0400, Chris Snook wrote:
> Define "duplicate". I ask because this patch just got posted a few days
> ago:
... and it had been wrong - it's really a duplicate (check several lines
above). My apologies.
^ permalink raw reply
* Re: [PATCH][12/37] Clean up duplicate includes in drivers/net/
From: Chris Snook @ 2007-07-21 16:40 UTC (permalink / raw)
To: Jesper Juhl, viro
Cc: info, Patrick McHardy, Judy Fischbach, Luke Yang, bonding-devel,
Bryan Wu, kong.lai, Jay Vosburgh, James Morris, linuxppc-embedded,
Alexey Kuznetsov, Alex V Lasso, Ulrich Kunitz, Chad Tindel,
Amit S Kale, Jay Cliburn, Samuel Ortiz, Brian Pugh, Daniel Drake,
alexandre.bounine, Pantelis Antoniou, netdev, linux-wireless,
Linux Kernel Mailing List, Ralf Baechle, Vitaly Bordug,
Lukasz Stelmach, Ron Mercer, atl1-devel, Andrew Morton,
David S. Miller, James P Ketrenos
In-Reply-To: <200707211702.46375.jesper.juhl@gmail.com>
Jesper Juhl wrote:
> Hi,
>
> This patch cleans up duplicate includes in
> drivers/net/
>
>
> Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
> ---
>
> diff --git a/drivers/net/atl1/atl1_main.c b/drivers/net/atl1/atl1_main.c
> index fd1e156..4a18b88 100644
> --- a/drivers/net/atl1/atl1_main.c
> +++ b/drivers/net/atl1/atl1_main.c
> @@ -75,7 +75,6 @@
> #include <linux/compiler.h>
> #include <linux/delay.h>
> #include <linux/mii.h>
> -#include <linux/interrupt.h>
> #include <net/checksum.h>
>
> #include <asm/atomic.h>
Define "duplicate". I ask because this patch just got posted a few days ago:
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
drivers/net/atl1/atl1_main.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/drivers/net/atl1/atl1_main.c b/drivers/net/atl1/atl1_main.c
index 4a18b88..fd1e156 100644
--- a/drivers/net/atl1/atl1_main.c
+++ b/drivers/net/atl1/atl1_main.c
@@ -75,6 +75,7 @@
#include <linux/compiler.h>
#include <linux/delay.h>
#include <linux/mii.h>
+#include <linux/interrupt.h>
#include <net/checksum.h>
#include <asm/atomic.h>
I've always been under the impression that one should include all the files
whose contents you use directly, because other includes that happen to include
them might no longer need to in the future and cease including them. You can
fight it out with Al if you feel like it. I'm keeping the rest of the CC list
because the other maintainers might have similar feelings about the
appropriateness of these includes in their drivers.
-- Chris
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox