* [PATCH 4/7] powerpc: Use pr_devel() in do_dcache_icache_coherency()
From: Michael Ellerman @ 2009-06-18 4:13 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1fdc1f0bb73b6ff2db7f9b394331d5ef5dfc4cb5.1245298429.git.michael@ellerman.id.au>
pr_debug() can now result in code being generated even when DEBUG
is not defined. That's not really desirable in some places.
With CONFIG_DYNAMIC_DEBUG=y:
size before:
text data bss dec hex filename
2036 368 8 2412 96c arch/powerpc/mm/pgtable.o
size after:
text data bss dec hex filename
1677 248 8 1933 78d arch/powerpc/mm/pgtable.o
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
---
arch/powerpc/mm/pgtable.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index ae1d67c..627767d 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -129,12 +129,12 @@ static pte_t do_dcache_icache_coherency(pte_t pte)
page = pfn_to_page(pfn);
if (!PageReserved(page) && !test_bit(PG_arch_1, &page->flags)) {
- pr_debug("do_dcache_icache_coherency... flushing\n");
+ pr_devel("do_dcache_icache_coherency... flushing\n");
flush_dcache_icache_page(page);
set_bit(PG_arch_1, &page->flags);
}
else
- pr_debug("do_dcache_icache_coherency... already clean\n");
+ pr_devel("do_dcache_icache_coherency... already clean\n");
return __pte(pte_val(pte) | _PAGE_HWEXEC);
}
--
1.6.2.1
^ permalink raw reply related
* [PATCH 3/7] powerpc: Cleanup & use pr_devel() in arch/powerpc/mm/slb.c
From: Michael Ellerman @ 2009-06-18 4:13 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1fdc1f0bb73b6ff2db7f9b394331d5ef5dfc4cb5.1245298429.git.michael@ellerman.id.au>
pr_debug() can now result in code being generated even when DEBUG
is not defined. That's not really desirable in some places.
With CONFIG_DYNAMIC_DEBUG=y:
size before:
text data bss dec hex filename
3261 416 4 3681 e61 arch/powerpc/mm/slb.o
size after:
text data bss dec hex filename
2861 248 4 3113 c29 arch/powerpc/mm/slb.o
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
---
arch/powerpc/mm/slb.c | 13 +++----------
1 files changed, 3 insertions(+), 10 deletions(-)
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 3b52c80..5b7038f 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -14,8 +14,6 @@
* 2 of the License, or (at your option) any later version.
*/
-#undef DEBUG
-
#include <asm/pgtable.h>
#include <asm/mmu.h>
#include <asm/mmu_context.h>
@@ -27,11 +25,6 @@
#include <linux/compiler.h>
#include <asm/udbg.h>
-#ifdef DEBUG
-#define DBG(fmt...) printk(fmt)
-#else
-#define DBG pr_debug
-#endif
extern void slb_allocate_realmode(unsigned long ea);
extern void slb_allocate_user(unsigned long ea);
@@ -285,13 +278,13 @@ void slb_initialize(void)
patch_slb_encoding(slb_compare_rr_to_size,
mmu_slb_size);
- DBG("SLB: linear LLP = %04lx\n", linear_llp);
- DBG("SLB: io LLP = %04lx\n", io_llp);
+ pr_devel("SLB: linear LLP = %04lx\n", linear_llp);
+ pr_devel("SLB: io LLP = %04lx\n", io_llp);
#ifdef CONFIG_SPARSEMEM_VMEMMAP
patch_slb_encoding(slb_miss_kernel_load_vmemmap,
SLB_VSID_KERNEL | vmemmap_llp);
- DBG("SLB: vmemmap LLP = %04lx\n", vmemmap_llp);
+ pr_devel("SLB: vmemmap LLP = %04lx\n", vmemmap_llp);
#endif
}
--
1.6.2.1
^ permalink raw reply related
* [PATCH 2/7] powerpc: Use pr_devel() in arch/powerpc/mm/gup.c
From: Michael Ellerman @ 2009-06-18 4:13 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1fdc1f0bb73b6ff2db7f9b394331d5ef5dfc4cb5.1245298429.git.michael@ellerman.id.au>
pr_debug() can now result in code being generated even when DEBUG
is not defined. That's not really desirable in some places.
With CONFIG_DYNAMIC_DEBUG=y:
size before:
text data bss dec hex filename
3252 384 0 3636 e34 arch/powerpc/mm/gup.o
size after:
text data bss dec hex filename
2576 96 0 2672 a70 arch/powerpc/mm/gup.o
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
---
arch/powerpc/mm/gup.c | 10 +++++-----
1 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c
index bc400c7..bc122a1 100644
--- a/arch/powerpc/mm/gup.c
+++ b/arch/powerpc/mm/gup.c
@@ -159,7 +159,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
int psize;
#endif
- pr_debug("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read");
+ pr_devel("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read");
start &= PAGE_MASK;
addr = start;
@@ -170,7 +170,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
start, len)))
goto slow_irqon;
- pr_debug(" aligned: %lx .. %lx\n", start, end);
+ pr_devel(" aligned: %lx .. %lx\n", start, end);
#ifdef CONFIG_HUGETLB_PAGE
/* We bail out on slice boundary crossing when hugetlb is
@@ -234,7 +234,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
do {
VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, a)].shift);
ptep = huge_pte_offset(mm, a);
- pr_debug(" %016lx: huge ptep %p\n", a, ptep);
+ pr_devel(" %016lx: huge ptep %p\n", a, ptep);
if (!ptep || !gup_huge_pte(ptep, hstate, &a, end, write, pages,
&nr))
goto slow;
@@ -249,7 +249,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
#ifdef CONFIG_PPC64
VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, addr)].shift);
#endif
- pr_debug(" %016lx: normal pgd %p\n", addr,
+ pr_devel(" %016lx: normal pgd %p\n", addr,
(void *)pgd_val(pgd));
next = pgd_addr_end(addr, end);
if (pgd_none(pgd))
@@ -269,7 +269,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
slow:
local_irq_enable();
slow_irqon:
- pr_debug(" slow path ! nr = %d\n", nr);
+ pr_devel(" slow path ! nr = %d\n", nr);
/* Try to get the remaining pages with get_user_pages */
start += nr << PAGE_SHIFT;
--
1.6.2.1
^ permalink raw reply related
* [PATCH 1/7] powerpc/pseries: Use pr_devel() in pseries LPAR HPTE routines
From: Michael Ellerman @ 2009-06-18 4:13 UTC (permalink / raw)
To: linuxppc-dev
pr_debug() can now result in code being generated even when DEBUG
is not defined. That's not really desirable in some places.
In particular, pSeries_lpar_hpte_insert() goes from 185 instructions
to 77 instructions as a result of this patch. Luckily that code
isn't called very often ...
With CONFIG_DYNAMIC_DEBUG=y:
size before:
text data bss dec hex filename
7284 1552 296 9132 23ac platforms/pseries/lpar.o
size after:
text data bss dec hex filename
5806 1096 296 7198 1c1e platforms/pseries/lpar.o
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
---
arch/powerpc/platforms/pseries/lpar.c | 18 +++++++++---------
1 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index e3139fa..903eb9e 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -286,7 +286,7 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group,
unsigned long hpte_v, hpte_r;
if (!(vflags & HPTE_V_BOLTED))
- pr_debug("hpte_insert(group=%lx, va=%016lx, pa=%016lx, "
+ pr_devel("hpte_insert(group=%lx, va=%016lx, pa=%016lx, "
"rflags=%lx, vflags=%lx, psize=%d)\n",
hpte_group, va, pa, rflags, vflags, psize);
@@ -294,7 +294,7 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group,
hpte_r = hpte_encode_r(pa, psize) | rflags;
if (!(vflags & HPTE_V_BOLTED))
- pr_debug(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r);
+ pr_devel(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r);
/* Now fill in the actual HPTE */
/* Set CEC cookie to 0 */
@@ -311,7 +311,7 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group,
lpar_rc = plpar_pte_enter(flags, hpte_group, hpte_v, hpte_r, &slot);
if (unlikely(lpar_rc == H_PTEG_FULL)) {
if (!(vflags & HPTE_V_BOLTED))
- pr_debug(" full\n");
+ pr_devel(" full\n");
return -1;
}
@@ -322,11 +322,11 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group,
*/
if (unlikely(lpar_rc != H_SUCCESS)) {
if (!(vflags & HPTE_V_BOLTED))
- pr_debug(" lpar err %lu\n", lpar_rc);
+ pr_devel(" lpar err %lu\n", lpar_rc);
return -2;
}
if (!(vflags & HPTE_V_BOLTED))
- pr_debug(" -> slot: %lu\n", slot & 7);
+ pr_devel(" -> slot: %lu\n", slot & 7);
/* Because of iSeries, we have to pass down the secondary
* bucket bit here as well
@@ -418,17 +418,17 @@ static long pSeries_lpar_hpte_updatepp(unsigned long slot,
want_v = hpte_encode_avpn(va, psize, ssize);
- pr_debug(" update: avpnv=%016lx, hash=%016lx, f=%lx, psize: %d ...",
+ pr_devel(" update: avpnv=%016lx, hash=%016lx, f=%lx, psize: %d ...",
want_v, slot, flags, psize);
lpar_rc = plpar_pte_protect(flags, slot, want_v);
if (lpar_rc == H_NOT_FOUND) {
- pr_debug("not found !\n");
+ pr_devel("not found !\n");
return -1;
}
- pr_debug("ok\n");
+ pr_devel("ok\n");
BUG_ON(lpar_rc != H_SUCCESS);
@@ -503,7 +503,7 @@ static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long va,
unsigned long lpar_rc;
unsigned long dummy1, dummy2;
- pr_debug(" inval : slot=%lx, va=%016lx, psize: %d, local: %d\n",
+ pr_devel(" inval : slot=%lx, va=%016lx, psize: %d, local: %d\n",
slot, va, psize, local);
want_v = hpte_encode_avpn(va, psize, ssize);
--
1.6.2.1
^ permalink raw reply related
* [PATCH] powerpc: Add irqtrace support for 32-bit powerpc (v2)
From: Benjamin Herrenschmidt @ 2009-06-18 3:43 UTC (permalink / raw)
To: linuxppc-dev
Based on initial work from: Dale Farnsworth <dale@farnsworth.org>
Add the low level irq tracing hooks for 32-bit powerpc needed
to enable full lockdep functionality.
The approach taken to deal with the code in entry_32.S is that
we don't trace all the transitions of MSR:EE when we just turn
it off to peek at TI_FLAGS without races. Only when we are
calling into C code or returning from exceptions with a state
that have changed from what lockdep thinks.
There's a little bugger though: If we take an exception that
keeps interrupts enabled (such as an alignment exception) while
interrupts are enabled, we will call trace_hardirqs_on() on the
way back spurriously. Not a big deal, but to get rid of it would
require remembering in pt_regs that the exception was one of the
type that kept interrupts enabled which we don't know at this
stage. (Well, we could test all cases for regs->trap but that
sucks too much).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
This one fixes a bug, trace_hardirqs_on was too late in the
restore: code path and would clobber things. This boots fine
now on a PowerBook.
arch/powerpc/Kconfig | 1
arch/powerpc/include/asm/hw_irq.h | 20 ++---
arch/powerpc/kernel/entry_32.S | 127 ++++++++++++++++++++++++++++++++++++--
arch/powerpc/kernel/setup_32.c | 2
arch/powerpc/kernel/udbg.c | 1
5 files changed, 136 insertions(+), 15 deletions(-)
--- linux-work.orig/arch/powerpc/Kconfig 2009-06-18 13:21:29.000000000 +1000
+++ linux-work/arch/powerpc/Kconfig 2009-06-18 13:21:39.000000000 +1000
@@ -62,7 +62,6 @@ config HAVE_LATENCYTOP_SUPPORT
config TRACE_IRQFLAGS_SUPPORT
bool
- depends on PPC64
default y
config LOCKDEP_SUPPORT
Index: linux-work/arch/powerpc/kernel/entry_32.S
===================================================================
--- linux-work.orig/arch/powerpc/kernel/entry_32.S 2009-06-18 13:21:29.000000000 +1000
+++ linux-work/arch/powerpc/kernel/entry_32.S 2009-06-18 13:36:41.000000000 +1000
@@ -191,11 +191,49 @@ transfer_to_handler_cont:
mflr r9
lwz r11,0(r9) /* virtual address of handler */
lwz r9,4(r9) /* where to go when done */
+#ifdef CONFIG_TRACE_IRQFLAGS
+ lis r12,reenable_mmu@h
+ ori r12,r12,reenable_mmu@l
+ mtspr SPRN_SRR0,r12
+ mtspr SPRN_SRR1,r10
+ SYNC
+ RFI
+reenable_mmu: /* re-enable mmu so we can */
+ mfmsr r10
+ lwz r12,_MSR(r1)
+ xor r10,r10,r12
+ andi. r10,r10,MSR_EE /* Did EE change? */
+ beq 1f
+
+ /* Save handler and return address into the 2 unused words
+ * of the STACK_FRAME_OVERHEAD (sneak sneak sneak). Everything
+ * else can be recovered from the pt_regs except r3 which for
+ * normal interrupts has been set to pt_regs and for syscalls
+ * is an argument, so we temporarily use ORIG_GPR3 to save it
+ */
+ stw r9,8(r1)
+ stw r11,12(r1)
+ stw r3,ORIG_GPR3(r1)
+ bl trace_hardirqs_off
+ lwz r0,GPR0(r1)
+ lwz r3,ORIG_GPR3(r1)
+ lwz r4,GPR4(r1)
+ lwz r5,GPR5(r1)
+ lwz r6,GPR6(r1)
+ lwz r7,GPR7(r1)
+ lwz r8,GPR8(r1)
+ lwz r9,8(r1)
+ lwz r11,12(r1)
+1: mtctr r11
+ mtlr r9
+ bctr /* jump to handler */
+#else /* CONFIG_TRACE_IRQFLAGS */
mtspr SPRN_SRR0,r11
mtspr SPRN_SRR1,r10
mtlr r9
SYNC
RFI /* jump to handler, enable MMU */
+#endif /* CONFIG_TRACE_IRQFLAGS */
#if defined (CONFIG_6xx) || defined(CONFIG_E500)
4: rlwinm r12,r12,0,~_TLF_NAPPING
@@ -251,6 +289,31 @@ _GLOBAL(DoSyscall)
#ifdef SHOW_SYSCALLS
bl do_show_syscall
#endif /* SHOW_SYSCALLS */
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* Return from syscalls can (and generally will) hard enable
+ * interrupts. You aren't supposed to call a syscall with
+ * interrupts disabled in the first place. However, to ensure
+ * that we get it right vs. lockdep if it happens, we force
+ * that hard enable here with appropriate tracing if we see
+ * that we have been called with interrupts off
+ */
+ mfmsr r11
+ andi. r12,r11,MSR_EE
+ bne+ 1f
+ /* We came in with interrupts disabled, we enable them now */
+ bl trace_hardirqs_on
+ mfmsr r11
+ lwz r0,GPR0(r1)
+ lwz r3,GPR3(r1)
+ lwz r4,GPR4(r1)
+ ori r11,r11,MSR_EE
+ lwz r5,GPR5(r1)
+ lwz r6,GPR6(r1)
+ lwz r7,GPR7(r1)
+ lwz r8,GPR8(r1)
+ mtmsr r11
+1:
+#endif /* CONFIG_TRACE_IRQFLAGS */
rlwinm r10,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */
lwz r11,TI_FLAGS(r10)
andi. r11,r11,_TIF_SYSCALL_T_OR_A
@@ -275,6 +338,7 @@ ret_from_syscall:
rlwinm r12,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */
/* disable interrupts so current_thread_info()->flags can't change */
LOAD_MSR_KERNEL(r10,MSR_KERNEL) /* doesn't include MSR_EE */
+ /* Note: We don't bother telling lockdep about it */
SYNC
MTMSRD(r10)
lwz r9,TI_FLAGS(r12)
@@ -288,6 +352,19 @@ ret_from_syscall:
oris r11,r11,0x1000 /* Set SO bit in CR */
stw r11,_CCR(r1)
syscall_exit_cont:
+ lwz r8,_MSR(r1)
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* If we are going to return from the syscall with interrupts
+ * off, we trace that here. It shouldn't happen though but we
+ * want to catch the bugger if it does right ?
+ */
+ andi. r10,r8,MSR_EE
+ bne+ 1f
+ stw r3,GPR3(r1)
+ bl trace_hardirqs_off
+ lwz r3,GPR3(r1)
+1:
+#endif /* CONFIG_TRACE_IRQFLAGS */
#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
/* If the process has its own DBCR0 value, load it up. The internal
debug mode bit tells us that dbcr0 should be loaded. */
@@ -311,7 +388,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRE
mtlr r4
mtcr r5
lwz r7,_NIP(r1)
- lwz r8,_MSR(r1)
FIX_SRR1(r8, r0)
lwz r2,GPR2(r1)
lwz r1,GPR1(r1)
@@ -394,7 +470,9 @@ syscall_exit_work:
andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
beq ret_from_except
- /* Re-enable interrupts */
+ /* Re-enable interrupts. There is no need to trace that with
+ * lockdep as we are supposed to have IRQs on at this point
+ */
ori r10,r10,MSR_EE
SYNC
MTMSRD(r10)
@@ -705,6 +783,7 @@ ret_from_except:
/* Hard-disable interrupts so that current_thread_info()->flags
* can't change between when we test it and when we return
* from the interrupt. */
+ /* Note: We don't bother telling lockdep about it */
LOAD_MSR_KERNEL(r10,MSR_KERNEL)
SYNC /* Some chip revs have problems here... */
MTMSRD(r10) /* disable interrupts */
@@ -744,11 +823,24 @@ resume_kernel:
beq+ restore
andi. r0,r3,MSR_EE /* interrupts off? */
beq restore /* don't schedule if so */
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* Lockdep thinks irqs are enabled, we need to call
+ * preempt_schedule_irq with IRQs off, so we inform lockdep
+ * now that we -did- turn them off already
+ */
+ bl trace_hardirqs_off
+#endif
1: bl preempt_schedule_irq
rlwinm r9,r1,0,0,(31-THREAD_SHIFT)
lwz r3,TI_FLAGS(r9)
andi. r0,r3,_TIF_NEED_RESCHED
bne- 1b
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* And now, to properly rebalance the above, we tell lockdep they
+ * are being turned back on, which will happen when we return
+ */
+ bl trace_hardirqs_on
+#endif
#else
resume_kernel:
#endif /* CONFIG_PREEMPT */
@@ -765,6 +857,28 @@ restore:
stw r6,icache_44x_need_flush@l(r4)
1:
#endif /* CONFIG_44x */
+
+ lwz r9,_MSR(r1)
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* Lockdep doesn't know about the fact that IRQs are temporarily turned
+ * off in this assembly code while peeking at TI_FLAGS() and such. However
+ * we need to inform it if the exception turned interrupts off, and we
+ * are about to trun them back on.
+ *
+ * The problem here sadly is that we don't know whether the exceptions was
+ * one that turned interrupts off or not. So we always tell lockdep about
+ * turning them on here when we go back to wherever we came from with EE
+ * on, even if that may meen some redudant calls being tracked. Maybe later
+ * we could encode what the exception did somewhere or test the exception
+ * type in the pt_regs but that sounds overkill
+ */
+ andi. r10,r9,MSR_EE
+ beq 1f
+ bl trace_hardirqs_on
+ lwz r9,_MSR(r1)
+1:
+#endif /* CONFIG_TRACE_IRQFLAGS */
+
lwz r0,GPR0(r1)
lwz r2,GPR2(r1)
REST_4GPRS(3, r1)
@@ -782,7 +896,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRE
stwcx. r0,0,r1 /* to clear the reservation */
#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
- lwz r9,_MSR(r1)
andi. r10,r9,MSR_RI /* check if this exception occurred */
beql nonrecoverable /* at a bad place (MSR:RI = 0) */
@@ -805,7 +918,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRE
MTMSRD(r10) /* clear the RI bit */
.globl exc_exit_restart
exc_exit_restart:
- lwz r9,_MSR(r1)
lwz r12,_NIP(r1)
FIX_SRR1(r9,r10)
mtspr SPRN_SRR0,r12
@@ -1035,11 +1147,18 @@ do_work: /* r10 contains MSR_KERNEL he
beq do_user_signal
do_resched: /* r10 contains MSR_KERNEL here */
+ /* Note: We don't need to inform lockdep that we are enabling
+ * interrupts here. As far as it knows, they are already enabled
+ */
ori r10,r10,MSR_EE
SYNC
MTMSRD(r10) /* hard-enable interrupts */
bl schedule
recheck:
+ /* Note: And we don't tell it we are disabling them again
+ * neither. Those disable/enable cycles used to peek at
+ * TI_FLAGS aren't advertised.
+ */
LOAD_MSR_KERNEL(r10,MSR_KERNEL)
SYNC
MTMSRD(r10) /* disable interrupts */
Index: linux-work/arch/powerpc/kernel/setup_32.c
===================================================================
--- linux-work.orig/arch/powerpc/kernel/setup_32.c 2009-06-18 13:21:29.000000000 +1000
+++ linux-work/arch/powerpc/kernel/setup_32.c 2009-06-18 13:21:39.000000000 +1000
@@ -119,6 +119,8 @@ notrace unsigned long __init early_init(
*/
notrace void __init machine_init(unsigned long dt_ptr)
{
+ lockdep_init();
+
/* Enable early debugging if any specified (see udbg.h) */
udbg_early_init();
Index: linux-work/arch/powerpc/include/asm/hw_irq.h
===================================================================
--- linux-work.orig/arch/powerpc/include/asm/hw_irq.h 2009-06-18 13:21:29.000000000 +1000
+++ linux-work/arch/powerpc/include/asm/hw_irq.h 2009-06-18 13:21:39.000000000 +1000
@@ -68,13 +68,13 @@ static inline int irqs_disabled_flags(un
#if defined(CONFIG_BOOKE)
#define SET_MSR_EE(x) mtmsr(x)
-#define local_irq_restore(flags) __asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory")
+#define raw_local_irq_restore(flags) __asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory")
#else
#define SET_MSR_EE(x) mtmsr(x)
-#define local_irq_restore(flags) mtmsr(flags)
+#define raw_local_irq_restore(flags) mtmsr(flags)
#endif
-static inline void local_irq_disable(void)
+static inline void raw_local_irq_disable(void)
{
#ifdef CONFIG_BOOKE
__asm__ __volatile__("wrteei 0": : :"memory");
@@ -86,7 +86,7 @@ static inline void local_irq_disable(voi
#endif
}
-static inline void local_irq_enable(void)
+static inline void raw_local_irq_enable(void)
{
#ifdef CONFIG_BOOKE
__asm__ __volatile__("wrteei 1": : :"memory");
@@ -98,7 +98,7 @@ static inline void local_irq_enable(void
#endif
}
-static inline void local_irq_save_ptr(unsigned long *flags)
+static inline void raw_local_irq_save_ptr(unsigned long *flags)
{
unsigned long msr;
msr = mfmsr();
@@ -110,12 +110,12 @@ static inline void local_irq_save_ptr(un
#endif
}
-#define local_save_flags(flags) ((flags) = mfmsr())
-#define local_irq_save(flags) local_irq_save_ptr(&flags)
-#define irqs_disabled() ((mfmsr() & MSR_EE) == 0)
+#define raw_local_save_flags(flags) ((flags) = mfmsr())
+#define raw_local_irq_save(flags) raw_local_irq_save_ptr(&flags)
+#define raw_irqs_disabled() ((mfmsr() & MSR_EE) == 0)
+#define raw_irqs_disabled_flags(flags) (((flags) & MSR_EE) == 0)
-#define hard_irq_enable() local_irq_enable()
-#define hard_irq_disable() local_irq_disable()
+#define hard_irq_disable() raw_local_irq_disable()
static inline int irqs_disabled_flags(unsigned long flags)
{
Index: linux-work/arch/powerpc/kernel/udbg.c
===================================================================
--- linux-work.orig/arch/powerpc/kernel/udbg.c 2009-06-18 13:21:29.000000000 +1000
+++ linux-work/arch/powerpc/kernel/udbg.c 2009-06-18 13:21:39.000000000 +1000
@@ -65,6 +65,7 @@ void __init udbg_early_init(void)
#ifdef CONFIG_PPC_EARLY_DEBUG
console_loglevel = 10;
#endif
+ register_early_udbg_console();
}
/* udbg library, used by xmon et al */
^ permalink raw reply
* [PATCH] powerpc/mm: Make k(un)map_atomic out of line
From: Benjamin Herrenschmidt @ 2009-06-18 3:39 UTC (permalink / raw)
To: linuxppc-dev
Those functions are way too big to be inline, besides, kmap_atomic()
wants to call debug_kmap_atomic() which isn't exported for modules
and causes module link failures.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
arch/powerpc/include/asm/highmem.h | 55 +--------------------------
arch/powerpc/mm/Makefile | 1
arch/powerpc/mm/highmem.c | 75 +++++++++++++++++++++++++++++++++++++
3 files changed, 80 insertions(+), 51 deletions(-)
--- linux-work.orig/arch/powerpc/include/asm/highmem.h 2009-06-18 11:34:42.000000000 +1000
+++ linux-work/arch/powerpc/include/asm/highmem.h 2009-06-18 11:34:45.000000000 +1000
@@ -62,6 +62,9 @@ extern pte_t *pkmap_page_table;
extern void *kmap_high(struct page *page);
extern void kunmap_high(struct page *page);
+extern void *kmap_atomic_prot(struct page *page, enum km_type type,
+ pgprot_t prot);
+extern void kunmap_atomic(void *kvaddr, enum km_type type);
static inline void *kmap(struct page *page)
{
@@ -79,62 +82,11 @@ static inline void kunmap(struct page *p
kunmap_high(page);
}
-/*
- * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
- * gives a more generic (and caching) interface. But kmap_atomic can
- * be used in IRQ contexts, so in some (very limited) cases we need
- * it.
- */
-static inline void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot)
-{
- unsigned int idx;
- unsigned long vaddr;
-
- /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
- pagefault_disable();
- if (!PageHighMem(page))
- return page_address(page);
-
- debug_kmap_atomic(type);
- idx = type + KM_TYPE_NR*smp_processor_id();
- vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
-#ifdef CONFIG_DEBUG_HIGHMEM
- BUG_ON(!pte_none(*(kmap_pte-idx)));
-#endif
- __set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot), 1);
- local_flush_tlb_page(NULL, vaddr);
-
- return (void*) vaddr;
-}
-
static inline void *kmap_atomic(struct page *page, enum km_type type)
{
return kmap_atomic_prot(page, type, kmap_prot);
}
-static inline void kunmap_atomic(void *kvaddr, enum km_type type)
-{
-#ifdef CONFIG_DEBUG_HIGHMEM
- unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
- enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id();
-
- if (vaddr < __fix_to_virt(FIX_KMAP_END)) {
- pagefault_enable();
- return;
- }
-
- BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
-
- /*
- * force other mappings to Oops if they'll try to access
- * this pte without first remap it
- */
- pte_clear(&init_mm, vaddr, kmap_pte-idx);
- local_flush_tlb_page(NULL, vaddr);
-#endif
- pagefault_enable();
-}
-
static inline struct page *kmap_atomic_to_page(void *ptr)
{
unsigned long idx, vaddr = (unsigned long) ptr;
@@ -148,6 +100,7 @@ static inline struct page *kmap_atomic_t
return pte_page(*pte);
}
+
#define flush_cache_kmaps() flush_cache_all()
#endif /* __KERNEL__ */
Index: linux-work/arch/powerpc/mm/Makefile
===================================================================
--- linux-work.orig/arch/powerpc/mm/Makefile 2009-06-18 11:34:42.000000000 +1000
+++ linux-work/arch/powerpc/mm/Makefile 2009-06-18 11:34:45.000000000 +1000
@@ -30,3 +30,4 @@ obj-$(CONFIG_PPC_MM_SLICES) += slice.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
obj-$(CONFIG_PPC_SUBPAGE_PROT) += subpage-prot.o
obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o
+obj-$(CONFIG_HIGHMEM) += highmem.o
Index: linux-work/arch/powerpc/mm/highmem.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-work/arch/powerpc/mm/highmem.c 2009-06-18 11:35:51.000000000 +1000
@@ -0,0 +1,75 @@
+/*
+ * highmem.c: virtual kernel memory mappings for high memory
+ *
+ * PowerPC version, stolen from the i386 version.
+ *
+ * Used in CONFIG_HIGHMEM systems for memory pages which
+ * are not addressable by direct kernel virtual addresses.
+ *
+ * Copyright (C) 1999 Gerhard Wichert, Siemens AG
+ * Gerhard.Wichert@pdb.siemens.de
+ *
+ *
+ * Redesigned the x86 32-bit VM architecture to deal with
+ * up to 16 Terrabyte physical memory. With current x86 CPUs
+ * we now support up to 64 Gigabytes physical RAM.
+ *
+ * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
+ *
+ * Reworked for PowerPC by various contributors. Moved from
+ * highmem.h by Benjamin Herrenschmidt (c) 2009 IBM Corp.
+ */
+
+
+/*
+ * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
+ * gives a more generic (and caching) interface. But kmap_atomic can
+ * be used in IRQ contexts, so in some (very limited) cases we need
+ * it.
+ */
+void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot)
+{
+ unsigned int idx;
+ unsigned long vaddr;
+
+ /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
+ pagefault_disable();
+ if (!PageHighMem(page))
+ return page_address(page);
+
+ debug_kmap_atomic(type);
+ idx = type + KM_TYPE_NR*smp_processor_id();
+ vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+#ifdef CONFIG_DEBUG_HIGHMEM
+ BUG_ON(!pte_none(*(kmap_pte-idx)));
+#endif
+ __set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot), 1);
+ local_flush_tlb_page(NULL, vaddr);
+
+ return (void*) vaddr;
+}
+EXPORT_SYMBOL(kmap_atomic_prot);
+
+void kunmap_atomic(void *kvaddr, enum km_type type)
+{
+#ifdef CONFIG_DEBUG_HIGHMEM
+ unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
+ enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id();
+
+ if (vaddr < __fix_to_virt(FIX_KMAP_END)) {
+ pagefault_enable();
+ return;
+ }
+
+ BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
+
+ /*
+ * force other mappings to Oops if they'll try to access
+ * this pte without first remap it
+ */
+ pte_clear(&init_mm, vaddr, kmap_pte-idx);
+ local_flush_tlb_page(NULL, vaddr);
+#endif
+ pagefault_enable();
+}
+EXPORT_SYMBOL(kunmap_atomic);
^ permalink raw reply
* [PATCH v4] powerpc/5200: Add mpc5200-spi (non-PSC) device driver
From: Grant Likely @ 2009-06-18 2:55 UTC (permalink / raw)
To: linuxppc-dev, David Brownell, spi-devel-general, linux-kernel
From: Grant Likely <grant.likely@secretlab.ca>
Adds support for the dedicated SPI device on the Freescale MPC5200(b)
SoC.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
Hi David,
It's been a while since I've posted this, but I believe I've addressed
all the outstanding comments against v3, and people are asking me for it.
The pre-message stuff is all gone and the error handling should be
better now.
BTW, the premessage stuff was to handle a platform I had where some of
the CS lines were controlled with a separate SPI transaction to the
same SPI controller. It almost looks like an SPI bridge. It requires
more thought before I try again.
Being a new driver, it would be nice to get it into 2.6.31, but
definitely not critical.
g.
drivers/spi/Kconfig | 8 +
drivers/spi/Makefile | 1
drivers/spi/mpc52xx_spi.c | 520 +++++++++++++++++++++++++++++++++++++++
include/linux/spi/mpc52xx_spi.h | 10 +
4 files changed, 539 insertions(+), 0 deletions(-)
create mode 100644 drivers/spi/mpc52xx_spi.c
create mode 100644 include/linux/spi/mpc52xx_spi.h
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 83a185d..1994bcd 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -132,6 +132,14 @@ config SPI_LM70_LLP
which interfaces to an LM70 temperature sensor using
a parallel port.
+config SPI_MPC52xx
+ tristate "Freescale MPC52xx SPI (non-PSC) controller support"
+ depends on PPC_MPC52xx && SPI
+ select SPI_MASTER_OF
+ help
+ This drivers supports the MPC52xx SPI controller in master SPI
+ mode.
+
config SPI_MPC52xx_PSC
tristate "Freescale MPC52xx PSC SPI controller"
depends on PPC_MPC52xx && EXPERIMENTAL
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 5d04519..8de32c7 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o
obj-$(CONFIG_SPI_OMAP24XX) += omap2_mcspi.o
obj-$(CONFIG_SPI_ORION) += orion_spi.o
obj-$(CONFIG_SPI_MPC52xx_PSC) += mpc52xx_psc_spi.o
+obj-$(CONFIG_SPI_MPC52xx) += mpc52xx_spi.o
obj-$(CONFIG_SPI_MPC83xx) += spi_mpc83xx.o
obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o
obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o
diff --git a/drivers/spi/mpc52xx_spi.c b/drivers/spi/mpc52xx_spi.c
new file mode 100644
index 0000000..ef8379b
--- /dev/null
+++ b/drivers/spi/mpc52xx_spi.c
@@ -0,0 +1,520 @@
+/*
+ * MPC52xx SPI bus driver.
+ *
+ * Copyright (C) 2008 Secret Lab Technologies Ltd.
+ *
+ * This file is released under the GPLv2
+ *
+ * This is the driver for the MPC5200's dedicated SPI controller.
+ *
+ * Note: this driver does not support the MPC5200 PSC in SPI mode. For
+ * that driver see drivers/spi/mpc52xx_psc_spi.c
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/of_platform.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/mpc52xx_spi.h>
+#include <linux/of_spi.h>
+#include <linux/io.h>
+#include <asm/time.h>
+#include <asm/mpc52xx.h>
+
+MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
+MODULE_DESCRIPTION("MPC52xx SPI (non-PSC) Driver");
+MODULE_LICENSE("GPL");
+
+/* Register offsets */
+#define SPI_CTRL1 0x00
+#define SPI_CTRL1_SPIE (1 << 7)
+#define SPI_CTRL1_SPE (1 << 6)
+#define SPI_CTRL1_MSTR (1 << 4)
+#define SPI_CTRL1_CPOL (1 << 3)
+#define SPI_CTRL1_CPHA (1 << 2)
+#define SPI_CTRL1_SSOE (1 << 1)
+#define SPI_CTRL1_LSBFE (1 << 0)
+
+#define SPI_CTRL2 0x01
+#define SPI_BRR 0x04
+
+#define SPI_STATUS 0x05
+#define SPI_STATUS_SPIF (1 << 7)
+#define SPI_STATUS_WCOL (1 << 6)
+#define SPI_STATUS_MODF (1 << 4)
+
+#define SPI_DATA 0x09
+#define SPI_PORTDATA 0x0d
+#define SPI_DATADIR 0x10
+
+/* FSM state return values */
+#define FSM_STOP 0 /* Nothing more for the state machine to */
+ /* do. If something interesting happens */
+ /* then and IRQ will be received */
+#define FSM_POLL 1 /* need to poll for completion, an IRQ is */
+ /* not expected */
+#define FSM_CONTINUE 2 /* Keep iterating the state machine */
+
+/* Driver internal data */
+struct mpc52xx_spi {
+ struct spi_master *master;
+ u32 sysclk;
+ void __iomem *regs;
+ int irq0; /* MODF irq */
+ int irq1; /* SPIF irq */
+ int ipb_freq;
+
+ /* Statistics */
+ int msg_count;
+ int wcol_count;
+ int wcol_ticks;
+ u32 wcol_tx_timestamp;
+ int modf_count;
+ int byte_count;
+
+ struct list_head queue; /* queue of pending messages */
+ spinlock_t lock;
+ struct work_struct work;
+
+
+ /* Details of current transfer (length, and buffer pointers) */
+ struct spi_message *message; /* current message */
+ struct spi_transfer *transfer; /* current transfer */
+ int (*state)(int irq, struct mpc52xx_spi *ms, u8 status, u8 data);
+ int len;
+ int timestamp;
+ u8 *rx_buf;
+ const u8 *tx_buf;
+ int cs_change;
+};
+
+/*
+ * CS control function
+ */
+static void mpc52xx_spi_chipsel(struct mpc52xx_spi *ms, int value)
+{
+ out_8(ms->regs + SPI_PORTDATA, value ? 0 : 0x08);
+}
+
+/*
+ * Start a new transfer. This is called both by the idle state
+ * for the first transfer in a message, and by the wait state when the
+ * previous transfer in a message is complete.
+ */
+static void mpc52xx_spi_start_transfer(struct mpc52xx_spi *ms)
+{
+ ms->rx_buf = ms->transfer->rx_buf;
+ ms->tx_buf = ms->transfer->tx_buf;
+ ms->len = ms->transfer->len;
+
+ /* Activate the chip select */
+ if (ms->cs_change)
+ mpc52xx_spi_chipsel(ms, 1);
+ ms->cs_change = ms->transfer->cs_change;
+
+ /* Write out the first byte */
+ ms->wcol_tx_timestamp = get_tbl();
+ if (ms->tx_buf)
+ out_8(ms->regs + SPI_DATA, *ms->tx_buf++);
+ else
+ out_8(ms->regs + SPI_DATA, 0);
+}
+
+/* Forward declaration of state handlers */
+static int mpc52xx_spi_fsmstate_transfer(int irq, struct mpc52xx_spi *ms,
+ u8 status, u8 data);
+static int mpc52xx_spi_fsmstate_wait(int irq, struct mpc52xx_spi *ms,
+ u8 status, u8 data);
+
+/*
+ * IDLE state
+ *
+ * No transfers are in progress; if another transfer is pending then retrieve
+ * it and kick it off. Otherwise, stop processing the state machine
+ */
+static int
+mpc52xx_spi_fsmstate_idle(int irq, struct mpc52xx_spi *ms, u8 status, u8 data)
+{
+ struct spi_device *spi;
+ int spr, sppr;
+ u8 ctrl1;
+
+ if (status && (irq != NO_IRQ))
+ dev_err(&ms->master->dev, "spurious irq, status=0x%.2x\n",
+ status);
+
+ /* Check if there is another transfer waiting. */
+ if (list_empty(&ms->queue))
+ return FSM_STOP;
+
+ /* get the head of the queue */
+ ms->message = list_first_entry(&ms->queue, struct spi_message, queue);
+ list_del_init(&ms->message->queue);
+
+ /* Setup the controller parameters */
+ ctrl1 = SPI_CTRL1_SPIE | SPI_CTRL1_SPE | SPI_CTRL1_MSTR;
+ spi = ms->message->spi;
+ if (spi->mode & SPI_CPHA)
+ ctrl1 |= SPI_CTRL1_CPHA;
+ if (spi->mode & SPI_CPOL)
+ ctrl1 |= SPI_CTRL1_CPOL;
+ if (spi->mode & SPI_LSB_FIRST)
+ ctrl1 |= SPI_CTRL1_LSBFE;
+ out_8(ms->regs + SPI_CTRL1, ctrl1);
+
+ /* Setup the controller speed */
+ /* minimum divider is '2'. Also, add '1' to force rounding the
+ * divider up. */
+ sppr = ((ms->ipb_freq / ms->message->spi->max_speed_hz) + 1) >> 1;
+ spr = 0;
+ if (sppr < 1)
+ sppr = 1;
+ while (((sppr - 1) & ~0x7) != 0) {
+ sppr = (sppr + 1) >> 1; /* add '1' to force rounding up */
+ spr++;
+ }
+ sppr--; /* sppr quantity in register is offset by 1 */
+ if (spr > 7) {
+ /* Don't overrun limits of SPI baudrate register */
+ spr = 7;
+ sppr = 7;
+ }
+ out_8(ms->regs + SPI_BRR, sppr << 4 | spr); /* Set speed */
+
+ ms->cs_change = 1;
+ ms->transfer = container_of(ms->message->transfers.next,
+ struct spi_transfer, transfer_list);
+
+ mpc52xx_spi_start_transfer(ms);
+ ms->state = mpc52xx_spi_fsmstate_transfer;
+
+ return FSM_CONTINUE;
+}
+
+/*
+ * TRANSFER state
+ *
+ * In the middle of a transfer. If the SPI core has completed processing
+ * a byte, then read out the received data and write out the next byte
+ * (unless this transfer is finished; in which case go on to the wait
+ * state)
+ */
+static int mpc52xx_spi_fsmstate_transfer(int irq, struct mpc52xx_spi *ms,
+ u8 status, u8 data)
+{
+ if (!status)
+ return ms->irq0 ? FSM_STOP : FSM_POLL;
+
+ if (status & SPI_STATUS_WCOL) {
+ /* The SPI controller is stoopid. At slower speeds, it may
+ * raise the SPIF flag before the state machine is actually
+ * finished, which causes a collision (internal to the state
+ * machine only). The manual recommends inserting a delay
+ * between receiving the interrupt and sending the next byte,
+ * but it can also be worked around simply by retrying the
+ * transfer which is what we do here. */
+ ms->wcol_count++;
+ ms->wcol_ticks += get_tbl() - ms->wcol_tx_timestamp;
+ ms->wcol_tx_timestamp = get_tbl();
+ data = 0;
+ if (ms->tx_buf)
+ data = *(ms->tx_buf-1);
+ out_8(ms->regs + SPI_DATA, data); /* try again */
+ return FSM_CONTINUE;
+ } else if (status & SPI_STATUS_MODF) {
+ ms->modf_count++;
+ dev_err(&ms->master->dev, "mode fault\n");
+ mpc52xx_spi_chipsel(ms, 0);
+ ms->message->status = -EIO;
+ ms->message->complete(ms->message->context);
+ ms->state = mpc52xx_spi_fsmstate_idle;
+ return FSM_CONTINUE;
+ }
+
+ /* Read data out of the spi device */
+ ms->byte_count++;
+ if (ms->rx_buf)
+ *ms->rx_buf++ = data;
+
+ /* Is the transfer complete? */
+ ms->len--;
+ if (ms->len == 0) {
+ ms->timestamp = get_tbl();
+ ms->timestamp += ms->transfer->delay_usecs * tb_ticks_per_usec;
+ ms->state = mpc52xx_spi_fsmstate_wait;
+ return FSM_CONTINUE;
+ }
+
+ /* Write out the next byte */
+ ms->wcol_tx_timestamp = get_tbl();
+ if (ms->tx_buf)
+ out_8(ms->regs + SPI_DATA, *ms->tx_buf++);
+ else
+ out_8(ms->regs + SPI_DATA, 0);
+
+ return FSM_CONTINUE;
+}
+
+/*
+ * WAIT state
+ *
+ * A transfer has completed; need to wait for the delay period to complete
+ * before starting the next transfer
+ */
+static int
+mpc52xx_spi_fsmstate_wait(int irq, struct mpc52xx_spi *ms, u8 status, u8 data)
+{
+ if (status && irq)
+ dev_err(&ms->master->dev, "spurious irq, status=0x%.2x\n",
+ status);
+
+ if (((int)get_tbl()) - ms->timestamp < 0)
+ return FSM_POLL;
+
+ ms->message->actual_length += ms->transfer->len;
+
+ /* Check if there is another transfer in this message. If there
+ * aren't then deactivate CS, notify sender, and drop back to idle
+ * to start the next message. */
+ if (ms->transfer->transfer_list.next == &ms->message->transfers) {
+ ms->msg_count++;
+ mpc52xx_spi_chipsel(ms, 0);
+ ms->message->status = 0;
+ ms->message->complete(ms->message->context);
+ ms->state = mpc52xx_spi_fsmstate_idle;
+ return FSM_CONTINUE;
+ }
+
+ /* There is another transfer; kick it off */
+
+ if (ms->cs_change)
+ mpc52xx_spi_chipsel(ms, 0);
+
+ ms->transfer = container_of(ms->transfer->transfer_list.next,
+ struct spi_transfer, transfer_list);
+ mpc52xx_spi_start_transfer(ms);
+ ms->state = mpc52xx_spi_fsmstate_transfer;
+ return FSM_CONTINUE;
+}
+
+/**
+ * mpc52xx_spi_fsm_process - Finite State Machine iteration function
+ * @irq: irq number that triggered the FSM or 0 for polling
+ * @ms: pointer to mpc52xx_spi driver data
+ */
+static void mpc52xx_spi_fsm_process(int irq, struct mpc52xx_spi *ms)
+{
+ int rc = FSM_CONTINUE;
+ u8 status, data;
+
+ while (rc == FSM_CONTINUE) {
+ /* Interrupt cleared by read of STATUS followed by
+ * read of DATA registers */
+ status = in_8(ms->regs + SPI_STATUS);
+ data = in_8(ms->regs + SPI_DATA);
+ rc = ms->state(irq, ms, status, data);
+ }
+
+ if (rc == FSM_POLL)
+ schedule_work(&ms->work);
+}
+
+/**
+ * mpc52xx_spi_irq - IRQ handler
+ */
+static irqreturn_t mpc52xx_spi_irq(int irq, void *_ms)
+{
+ struct mpc52xx_spi *ms = _ms;
+ spin_lock(&ms->lock);
+ mpc52xx_spi_fsm_process(irq, ms);
+ spin_unlock(&ms->lock);
+ return IRQ_HANDLED;
+}
+
+/**
+ * mpc52xx_spi_wq - Workqueue function for polling the state machine
+ */
+static void mpc52xx_spi_wq(struct work_struct *work)
+{
+ struct mpc52xx_spi *ms = container_of(work, struct mpc52xx_spi, work);
+ unsigned long flags;
+
+ spin_lock_irqsave(&ms->lock, flags);
+ mpc52xx_spi_fsm_process(0, ms);
+ spin_unlock_irqrestore(&ms->lock, flags);
+}
+
+/*
+ * spi_master ops
+ */
+
+static int mpc52xx_spi_setup(struct spi_device *spi)
+{
+ if (spi->bits_per_word % 8)
+ return -EINVAL;
+
+ if (spi->mode & ~(SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST))
+ return -EINVAL;
+
+ if (spi->chip_select >= spi->master->num_chipselect)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int mpc52xx_spi_transfer(struct spi_device *spi, struct spi_message *m)
+{
+ struct mpc52xx_spi *ms = spi_master_get_devdata(spi->master);
+ unsigned long flags;
+
+ m->actual_length = 0;
+ m->status = -EINPROGRESS;
+
+ spin_lock_irqsave(&ms->lock, flags);
+ list_add_tail(&m->queue, &ms->queue);
+ spin_unlock_irqrestore(&ms->lock, flags);
+ schedule_work(&ms->work);
+
+ return 0;
+}
+
+/*
+ * OF Platform Bus Binding
+ */
+static int __devinit mpc52xx_spi_probe(struct of_device *op,
+ const struct of_device_id *match)
+{
+ struct spi_master *master;
+ struct mpc52xx_spi *ms;
+ void __iomem *regs;
+ int rc;
+
+ /* MMIO registers */
+ dev_dbg(&op->dev, "probing mpc5200 SPI device\n");
+ regs = of_iomap(op->node, 0);
+ if (!regs)
+ return -ENODEV;
+
+ /* initialize the device */
+ out_8(regs+SPI_CTRL1, SPI_CTRL1_SPIE | SPI_CTRL1_SPE | SPI_CTRL1_MSTR);
+ out_8(regs + SPI_CTRL2, 0x0);
+ out_8(regs + SPI_DATADIR, 0xe); /* Set output pins */
+ out_8(regs + SPI_PORTDATA, 0x8); /* Deassert /SS signal */
+
+ /* Clear the status register and re-read it to check for a MODF
+ * failure. This driver cannot currently handle multiple masters
+ * on the SPI bus. This fault will also occur if the SPI signals
+ * are not connected to any pins (port_config setting) */
+ in_8(regs + SPI_STATUS);
+ in_8(regs + SPI_DATA);
+ if (in_8(regs + SPI_STATUS) & SPI_STATUS_MODF) {
+ dev_err(&op->dev, "mode fault; is port_config correct?\n");
+ rc = -EIO;
+ goto err_init;
+ }
+
+ dev_dbg(&op->dev, "allocating spi_master struct\n");
+ master = spi_alloc_master(&op->dev, sizeof *ms);
+ if (!master) {
+ rc = -ENOMEM;
+ goto err_alloc;
+ }
+ master->bus_num = -1;
+ master->num_chipselect = 1;
+ master->setup = mpc52xx_spi_setup;
+ master->transfer = mpc52xx_spi_transfer;
+ dev_set_drvdata(&op->dev, master);
+
+ ms = spi_master_get_devdata(master);
+ ms->master = master;
+ ms->regs = regs;
+ ms->irq0 = irq_of_parse_and_map(op->node, 0);
+ ms->irq1 = irq_of_parse_and_map(op->node, 1);
+ ms->state = mpc52xx_spi_fsmstate_idle;
+ ms->ipb_freq = mpc5xxx_get_bus_frequency(op->node);
+ spin_lock_init(&ms->lock);
+ INIT_LIST_HEAD(&ms->queue);
+ INIT_WORK(&ms->work, mpc52xx_spi_wq);
+
+ /* Decide if interrupts can be used */
+ if (ms->irq0 && ms->irq1) {
+ rc = request_irq(ms->irq0, mpc52xx_spi_irq, IRQF_SAMPLE_RANDOM,
+ "mpc5200-spi-modf", ms);
+ rc |= request_irq(ms->irq1, mpc52xx_spi_irq, IRQF_SAMPLE_RANDOM,
+ "mpc5200-spi-spiF", ms);
+ if (rc) {
+ free_irq(ms->irq0, ms);
+ free_irq(ms->irq1, ms);
+ ms->irq0 = ms->irq1 = 0;
+ }
+ } else {
+ /* operate in polled mode */
+ ms->irq0 = ms->irq1 = 0;
+ }
+
+ if (!ms->irq0)
+ dev_info(&op->dev, "using polled mode\n");
+
+ dev_dbg(&op->dev, "registering spi_master struct\n");
+ rc = spi_register_master(master);
+ if (rc)
+ goto err_register;
+
+ of_register_spi_devices(master, op->node);
+ dev_info(&ms->master->dev, "registered MPC5200 SPI bus\n");
+
+ return rc;
+
+ err_register:
+ dev_err(&ms->master->dev, "initialization failed\n");
+ spi_master_put(master);
+ err_alloc:
+ err_init:
+ iounmap(regs);
+ return rc;
+}
+
+static int __devexit mpc52xx_spi_remove(struct of_device *op)
+{
+ struct spi_master *master = dev_get_drvdata(&op->dev);
+ struct mpc52xx_spi *ms = spi_master_get_devdata(master);
+
+ free_irq(ms->irq0, ms);
+ free_irq(ms->irq1, ms);
+
+ spi_unregister_master(master);
+ spi_master_put(master);
+ iounmap(ms->regs);
+
+ return 0;
+}
+
+static struct of_device_id mpc52xx_spi_match[] __devinitdata = {
+ { .compatible = "fsl,mpc5200-spi", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, mpc52xx_spi_match);
+
+static struct of_platform_driver mpc52xx_spi_of_driver = {
+ .owner = THIS_MODULE,
+ .name = "mpc52xx-spi",
+ .match_table = mpc52xx_spi_match,
+ .probe = mpc52xx_spi_probe,
+ .remove = __exit_p(mpc52xx_spi_remove),
+};
+
+static int __init mpc52xx_spi_init(void)
+{
+ return of_register_platform_driver(&mpc52xx_spi_of_driver);
+}
+module_init(mpc52xx_spi_init);
+
+static void __exit mpc52xx_spi_exit(void)
+{
+ of_unregister_platform_driver(&mpc52xx_spi_of_driver);
+}
+module_exit(mpc52xx_spi_exit);
+
diff --git a/include/linux/spi/mpc52xx_spi.h b/include/linux/spi/mpc52xx_spi.h
new file mode 100644
index 0000000..d1004cf
--- /dev/null
+++ b/include/linux/spi/mpc52xx_spi.h
@@ -0,0 +1,10 @@
+
+#ifndef INCLUDE_MPC5200_SPI_H
+#define INCLUDE_MPC5200_SPI_H
+
+extern void mpc52xx_spi_set_premessage_hook(struct spi_master *master,
+ void (*hook)(struct spi_message *m,
+ void *context),
+ void *hook_context);
+
+#endif
^ permalink raw reply related
* [PATCH v3] powerpc/5200: add LocalPlus bus FIFO device driver
From: Grant Likely @ 2009-06-18 2:39 UTC (permalink / raw)
To: linuxppc-dev
From: Grant Likely <grant.likely@secretlab.ca>
This is a driver for the LocalPlus bus FIFO device
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
arch/powerpc/include/asm/mpc52xx.h | 36 ++
arch/powerpc/platforms/52xx/Kconfig | 4
arch/powerpc/platforms/52xx/Makefile | 1
arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c | 458 +++++++++++++++++++++++++
4 files changed, 499 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
diff --git a/arch/powerpc/include/asm/mpc52xx.h b/arch/powerpc/include/asm/mpc52xx.h
index 6716850..974fc8f 100644
--- a/arch/powerpc/include/asm/mpc52xx.h
+++ b/arch/powerpc/include/asm/mpc52xx.h
@@ -283,6 +283,42 @@ extern int mpc52xx_gpt_start_timer(struct mpc52xx_gpt_priv *gpt, int period,
int continuous);
extern void mpc52xx_gpt_stop_timer(struct mpc52xx_gpt_priv *gpt);
+/* mpc52xx_lpbfifo.c */
+#define MPC52XX_LPBFIFO_FLAG_READ (0)
+#define MPC52XX_LPBFIFO_FLAG_WRITE (1<<0)
+#define MPC52XX_LPBFIFO_FLAG_NO_INCREMENT (1<<1)
+#define MPC52XX_LPBFIFO_FLAG_NO_DMA (1<<2)
+#define MPC52XX_LPBFIFO_FLAG_POLL_DMA (1<<3)
+
+struct mpc52xx_lpbfifo_request {
+ struct list_head list;
+
+ /* localplus bus address */
+ unsigned int cs;
+ size_t offset;
+
+ /* Memory address */
+ void *data;
+ phys_addr_t data_phys;
+
+ /* Details of transfer */
+ size_t size;
+ size_t pos; /* current position of transfer */
+ int flags;
+
+ /* What to do when finished */
+ void (*callback)(struct mpc52xx_lpbfifo_request *);
+
+ void *priv; /* Driver private data */
+
+ /* statistics */
+ int irq_count;
+ int irq_ticks;
+};
+
+extern int mpc52xx_lpbfifo_submit(struct mpc52xx_lpbfifo_request *req);
+extern void mpc52xx_lpbfifo_abort(struct mpc52xx_lpbfifo_request *req);
+
/* mpc52xx_pic.c */
extern void mpc52xx_init_irq(void);
extern unsigned int mpc52xx_get_irq(void);
diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig
index 8b8e956..d64783e 100644
--- a/arch/powerpc/platforms/52xx/Kconfig
+++ b/arch/powerpc/platforms/52xx/Kconfig
@@ -62,3 +62,7 @@ config PPC_MPC5200_GPIO
select GENERIC_GPIO
help
Enable gpiolib support for mpc5200 based boards
+
+config PPC_MPC5200_LPBFIFO
+ tristate "MPC5200 LocalPlus bus FIFO driver"
+ depends on PPC_MPC52xx
diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile
index bfd4f52..2bc8cd0 100644
--- a/arch/powerpc/platforms/52xx/Makefile
+++ b/arch/powerpc/platforms/52xx/Makefile
@@ -15,3 +15,4 @@ ifeq ($(CONFIG_PPC_LITE5200),y)
endif
obj-$(CONFIG_PPC_MPC5200_GPIO) += mpc52xx_gpio.o
+obj-$(CONFIG_PPC_MPC5200_LPBFIFO) += mpc52xx_lpbfifo.o
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
new file mode 100644
index 0000000..fe32ae5
--- /dev/null
+++ b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
@@ -0,0 +1,458 @@
+/*
+ * LocalPlus Bus FIFO driver for the Freescale MPC52xx.
+ *
+ * Copyright (C) 2009 Secret Lab Technologies Ltd.
+ *
+ * This file is released under the GPLv2
+ *
+ * Todo:
+ * - Add support for multiple requests to be queued.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/spinlock.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/mpc52xx.h>
+#include <asm/time.h>
+
+#include <sysdev/bestcomm/bestcomm.h>
+#include <sysdev/bestcomm/bestcomm_priv.h>
+#include <sysdev/bestcomm/gen_bd.h>
+
+MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
+MODULE_DESCRIPTION("MPC5200 LocalPlus FIFO device driver");
+MODULE_LICENSE("GPL");
+
+#define LPBFIFO_REG_PACKET_SIZE (0x00)
+#define LPBFIFO_REG_START_ADDRESS (0x04)
+#define LPBFIFO_REG_CONTROL (0x08)
+#define LPBFIFO_REG_ENABLE (0x0C)
+#define LPBFIFO_REG_BYTES_DONE_STATUS (0x14)
+#define LPBFIFO_REG_FIFO_DATA (0x40)
+#define LPBFIFO_REG_FIFO_STATUS (0x44)
+#define LPBFIFO_REG_FIFO_CONTROL (0x48)
+#define LPBFIFO_REG_FIFO_ALARM (0x4C)
+
+struct mpc52xx_lpbfifo {
+ struct device *dev;
+ phys_addr_t regs_phys;
+ void __iomem *regs;
+ int irq;
+ spinlock_t lock;
+
+ struct bcom_task *bcom_tx_task;
+ struct bcom_task *bcom_rx_task;
+ struct bcom_task *bcom_cur_task;
+
+ /* Current state data */
+ struct mpc52xx_lpbfifo_request *req;
+};
+
+/* The MPC5200 has only one fifo, so only need one instance structure */
+static struct mpc52xx_lpbfifo lpbfifo;
+
+/**
+ * mpc52xx_lpbfifo_kick - Trigger the next block of data to be transfered
+ */
+static void mpc52xx_lpbfifo_kick(struct mpc52xx_lpbfifo_request *req)
+{
+ size_t transfer_size = req->size - req->pos;
+ struct bcom_bd *bd;
+ void __iomem *reg;
+ u32 *data;
+ int i;
+
+ /* Set and clear the reset bits; is good practice in User Manual */
+ out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x01010000);
+
+ if (req->flags & MPC52XX_LPBFIFO_FLAG_NO_DMA) {
+ /* While the FIFO can be setup for transfer sizes as large as
+ * 16M-1, the FIFO itself is only 512 bytes deep and it does
+ * not generate interrupts for FIFO full events (only transfer
+ * complete will raise an IRQ). Therefore when not using
+ * Bestcomm to drive the FIFO it needs to either be polled, or
+ * transfers need to constrained to the size of the fifo.
+ *
+ * This driver restricts the size of the transfer
+ */
+ if (transfer_size > 512)
+ transfer_size = 512;
+
+ /* Load the FIFO with data */
+ if (req->flags & MPC52XX_LPBFIFO_FLAG_WRITE) {
+ reg = lpbfifo.regs + LPBFIFO_REG_FIFO_DATA;
+ data = req->data + req->pos;
+ for (i = 0; i < transfer_size; i += 4)
+ out_be32(reg, *data++);
+ }
+
+ /* Unmask both error and completion irqs */
+ out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x00000301);
+ } else {
+ /* Choose the correct direction */
+ if (req->flags & MPC52XX_LPBFIFO_FLAG_WRITE)
+ lpbfifo.bcom_cur_task = lpbfifo.bcom_tx_task;
+ else
+ lpbfifo.bcom_cur_task = lpbfifo.bcom_rx_task;
+
+ bd = bcom_prepare_next_buffer(lpbfifo.bcom_cur_task);
+ bd->status = transfer_size;
+ transfer_size += 4; /* BLECH! */
+ bd->data[0] = req->data_phys + req->pos;
+ bcom_submit_next_buffer(lpbfifo.bcom_cur_task, NULL);
+
+ /* Unmask error irq */
+ out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x00000201);
+ }
+
+ /* Set transfer size, width, chip select and READ mode */
+ out_be32(lpbfifo.regs + LPBFIFO_REG_START_ADDRESS,
+ req->offset + req->pos);
+ out_be32(lpbfifo.regs + LPBFIFO_REG_PACKET_SIZE, transfer_size);
+ out_be32(lpbfifo.regs + LPBFIFO_REG_CONTROL, req->cs << 24 | 0x010008);
+
+ /* Kick it off */
+ out_8(lpbfifo.regs + LPBFIFO_REG_PACKET_SIZE, 0x01);
+ if (!(req->flags & MPC52XX_LPBFIFO_FLAG_NO_DMA))
+ bcom_enable(lpbfifo.bcom_cur_task);
+}
+
+/**
+ * mpc52xx_lpbfifo_irq - IRQ handler for LPB FIFO
+ */
+static irqreturn_t mpc52xx_lpbfifo_irq(int irq, void *dev_id)
+{
+ struct mpc52xx_lpbfifo_request *req;
+ u8 status = in_8(lpbfifo.regs + LPBFIFO_REG_BYTES_DONE_STATUS);
+ void __iomem *reg;
+ u32 *data;
+ int count, i;
+ int do_callback = 0;
+ u32 ts;
+ unsigned long flags;
+
+ spin_lock_irqsave(&lpbfifo.lock, flags);
+ ts = get_tbl();
+
+ req = lpbfifo.req;
+ if (!req) {
+ spin_unlock_irqrestore(&lpbfifo.lock, flags);
+ pr_err("bogus LPBFIFO IRQ\n");
+ return IRQ_HANDLED;
+ }
+
+ /*
+ * This is a tricky bit of code. There are 4 exit conditions:
+ * 1. FIFO abort
+ * 2. FIFO complete without DMA; more data to do
+ * 3. FIFO complete without DMA; all data transfered
+ * 4. FIFO complete using DMA
+ *
+ * Condition 1 can occur regardless of whether or not DMA is used.
+ * It requires executing the callback to report the error and exiting
+ * immediately.
+ *
+ * Condition 2 requires programming the FIFO with the next block of data
+ *
+ * Condition 3 requires executing the callback to report completion
+ *
+ * Condition 4 means the same as 3, except the callback must *not* be
+ * executed. Instead, execution of the callback is deferred to the DMA
+ * interrupt handler.
+ *
+ * To make things trickier, the spinlock must be dropped before
+ * executing the callback, otherwise we could end up with a deadlock
+ * or nested spinlock condition. The out path is non-trivial, so
+ * extra fiddling is done to make sure all paths lead to the same
+ * outbound code.
+ */
+
+ /* check abort bit */
+ if (status & 0x10) {
+ out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x01010000);
+ do_callback = 1;
+ goto out;
+ }
+
+ /* If using DMA, we should not be at this point */
+ if (!(req->flags & MPC52XX_LPBFIFO_FLAG_NO_DMA)) {
+ pr_err("bad IRQ mask? mask:%.8x status:%.8x flags=%x\n",
+ in_be32(lpbfifo.regs + LPBFIFO_REG_BYTES_DONE_STATUS),
+ status, req->flags);
+ goto out;
+ }
+
+ /* If the transaction done bit is *not* set; then why are we here? */
+ if ((status & 0x01) == 0) {
+ pr_err("spurious IRQ? %x\n", status);
+ goto out;
+ }
+
+ /* Read result from hardware */
+ count = in_be32(lpbfifo.regs + LPBFIFO_REG_BYTES_DONE_STATUS);
+ count &= 0x00ffffff;
+
+ /* copy the data out of the FIFO */
+ if (!(req->flags & MPC52XX_LPBFIFO_FLAG_WRITE)) {
+ reg = lpbfifo.regs + LPBFIFO_REG_FIFO_DATA;
+ data = req->data + req->pos;
+ for (i = 0; i < count; i += 4)
+ *data++ = in_be32(reg);
+ }
+
+ /* Update transfer position and count */
+ req->pos += count;
+
+ /* Decide what to do next */
+ if (req->size - req->pos)
+ mpc52xx_lpbfifo_kick(req); /* more work to do */
+ else
+ do_callback = 1;
+
+ out:
+ /* Clear the IRQ */
+ out_8(lpbfifo.regs + LPBFIFO_REG_BYTES_DONE_STATUS, 0x01);
+
+ /* When the do_callback flag is set; it means the transfer is finished
+ * so set the FIFO as idle */
+ if (do_callback)
+ lpbfifo.req = NULL;
+
+ /* Release the lock before calling out to the callback. */
+ req->irq_count++;
+ req->irq_ticks += get_tbl() - ts;
+ spin_unlock_irqrestore(&lpbfifo.lock, flags);
+
+ /* Spinlock is released; it is now safe to call the callback */
+ if (do_callback && req->callback)
+ req->callback(req);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * mpc52xx_lpbfifo_bcom_irq - IRQ handler for LPB FIFO Bestcomm task
+ */
+static irqreturn_t mpc52xx_lpbfifo_bcom_irq(int irq, void *dev_id)
+{
+ struct mpc52xx_lpbfifo_request *req;
+ unsigned long flags;
+ u32 status;
+ u32 ts;
+
+ spin_lock_irqsave(&lpbfifo.lock, flags);
+ ts = get_tbl();
+
+ req = lpbfifo.req;
+ if (!req) {
+ spin_unlock_irqrestore(&lpbfifo.lock, flags);
+ WARN_ONCE(1, "bogus Bestcomm IRQ\n");
+ return IRQ_HANDLED;
+ }
+
+ bcom_retrieve_buffer(lpbfifo.bcom_cur_task, &status, NULL);
+
+ req->pos = status & 0x00ffffff;
+
+ /* Mark the FIFO as idle */
+ lpbfifo.req = NULL;
+
+ /* Release the lock before calling out to the callback. */
+ req->irq_count++;
+ req->irq_ticks += get_tbl() - ts;
+ spin_unlock_irqrestore(&lpbfifo.lock, flags);
+
+ if (req->callback)
+ req->callback(req);
+
+ return IRQ_HANDLED;
+}
+
+
+/**
+ * mpc52xx_lpbfifo_submit - Submit an LPB FIFO transfer request.
+ * @req: Pointer to request structure
+ */
+int mpc52xx_lpbfifo_submit(struct mpc52xx_lpbfifo_request *req)
+{
+ unsigned long flags;
+
+ if (!lpbfifo.regs)
+ return -ENODEV;
+
+ spin_lock_irqsave(&lpbfifo.lock, flags);
+
+ /* If the req pointer is already set, then a transfer is in progress */
+ if (lpbfifo.req) {
+ spin_unlock_irqrestore(&lpbfifo.lock, flags);
+ return -EBUSY;
+ }
+
+ /* Setup the transfer */
+ lpbfifo.req = req;
+ req->irq_count = 0;
+ req->irq_ticks = 0;
+ req->pos = 0;
+
+ mpc52xx_lpbfifo_kick(req);
+ spin_unlock_irqrestore(&lpbfifo.lock, flags);
+ return 0;
+}
+EXPORT_SYMBOL(mpc52xx_lpbfifo_submit);
+
+void mpc52xx_lpbfifo_abort(struct mpc52xx_lpbfifo_request *req)
+{
+ unsigned long flags;
+
+ if (lpbfifo.req != req)
+ return;
+
+ spin_lock_irqsave(&lpbfifo.lock, flags);
+ /* Put it into reset and clear the state */
+ out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x01010000);
+ lpbfifo.req = NULL;
+ spin_unlock_irqrestore(&lpbfifo.lock, flags);
+}
+EXPORT_SYMBOL(mpc52xx_lpbfifo_abort);
+
+static int __devinit
+mpc52xx_lpbfifo_probe(struct of_device *op, const struct of_device_id *match)
+{
+ struct resource res;
+ int rc = -ENOMEM;
+
+ if (lpbfifo.dev != NULL)
+ return -ENOSPC;
+
+ lpbfifo.irq = irq_of_parse_and_map(op->node, 0);
+ if (!lpbfifo.irq)
+ return -ENODEV;
+
+ if (of_address_to_resource(op->node, 0, &res))
+ return -ENODEV;
+ lpbfifo.regs_phys = res.start;
+ lpbfifo.regs = of_iomap(op->node, 0);
+ if (!lpbfifo.regs)
+ return -ENOMEM;
+
+ spin_lock_init(&lpbfifo.lock);
+
+ /* Put FIFO into reset */
+ out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x01010000);
+
+ /* Configure the watermarks so DMA will always complete correctly.
+ * It may be worth experimenting with the ALARM value to see if
+ * there is a performance impacit. However, if it is wrong there
+ * is a risk of DMA not transferring the last chunk of data */
+ out_be32(lpbfifo.regs + LPBFIFO_REG_FIFO_ALARM, 0x1ff);
+ out_8(lpbfifo.regs + LPBFIFO_REG_FIFO_CONTROL, 0);
+
+ /* Register the interrupt handler */
+ rc = request_irq(lpbfifo.irq, mpc52xx_lpbfifo_irq, 0,
+ "mpc52xx-lpbfifo", &lpbfifo);
+ if (rc)
+ goto err_irq;
+
+ /* Request the Bestcomm receive (fifo --> memory) task and IRQ */
+ lpbfifo.bcom_rx_task =
+ bcom_gen_bd_rx_init(2, res.start + LPBFIFO_REG_FIFO_DATA,
+ BCOM_INITIATOR_SCLPC, BCOM_IPR_SCLPC,
+ 16*1024*1024);
+ if (!lpbfifo.bcom_rx_task)
+ goto err_bcom_rx;
+
+ rc = request_irq(bcom_get_task_irq(lpbfifo.bcom_rx_task),
+ mpc52xx_lpbfifo_bcom_irq, 0,
+ "mpc52xx-lpbfifo-rx", &lpbfifo);
+ if (rc)
+ goto err_bcom_rx_irq;
+
+ /* Request the Bestcomm transmit (memory --> fifo) task and IRQ */
+ lpbfifo.bcom_tx_task =
+ bcom_gen_bd_tx_init(2, res.start + LPBFIFO_REG_FIFO_DATA,
+ BCOM_INITIATOR_SCLPC, BCOM_IPR_SCLPC);
+ if (!lpbfifo.bcom_tx_task)
+ goto err_bcom_tx;
+
+ rc = request_irq(bcom_get_task_irq(lpbfifo.bcom_tx_task),
+ mpc52xx_lpbfifo_bcom_irq, 0,
+ "mpc52xx-lpbfifo-tx", &lpbfifo);
+ if (rc)
+ goto err_bcom_tx_irq;
+
+ lpbfifo.dev = &op->dev;
+ return 0;
+
+ err_bcom_tx_irq:
+ bcom_gen_bd_tx_release(lpbfifo.bcom_tx_task);
+ err_bcom_tx:
+ free_irq(bcom_get_task_irq(lpbfifo.bcom_rx_task), &lpbfifo);
+ err_bcom_rx_irq:
+ bcom_gen_bd_rx_release(lpbfifo.bcom_rx_task);
+ err_bcom_rx:
+ err_irq:
+ iounmap(lpbfifo.regs);
+ lpbfifo.regs = NULL;
+
+ dev_err(&op->dev, "mpc52xx_lpbfifo_probe() failed\n");
+ return -ENODEV;
+}
+
+
+static int __devexit mpc52xx_lpbfifo_remove(struct of_device *op)
+{
+ if (lpbfifo.dev != &op->dev)
+ return 0;
+
+ /* Put FIFO in reset */
+ out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x01010000);
+
+ /* Release the bestcomm transmit task */
+ free_irq(bcom_get_task_irq(lpbfifo.bcom_tx_task), &lpbfifo);
+ bcom_gen_bd_tx_release(lpbfifo.bcom_tx_task);
+
+ /* Release the bestcomm receive task */
+ free_irq(bcom_get_task_irq(lpbfifo.bcom_rx_task), &lpbfifo);
+ bcom_gen_bd_rx_release(lpbfifo.bcom_rx_task);
+
+ free_irq(lpbfifo.irq, &lpbfifo);
+ iounmap(lpbfifo.regs);
+ lpbfifo.regs = NULL;
+ lpbfifo.dev = NULL;
+
+ return 0;
+}
+
+static struct of_device_id mpc52xx_lpbfifo_match[] __devinitconst = {
+ { .compatible = "fsl,mpc5200-lpbfifo", },
+ {},
+};
+
+static struct of_platform_driver mpc52xx_lpbfifo_driver = {
+ .owner = THIS_MODULE,
+ .name = "mpc52xx-lpbfifo",
+ .match_table = mpc52xx_lpbfifo_match,
+ .probe = mpc52xx_lpbfifo_probe,
+ .remove = __devexit_p(mpc52xx_lpbfifo_remove),
+};
+
+/***********************************************************************
+ * Module init/exit
+ */
+static int __init mpc52xx_lpbfifo_init(void)
+{
+ pr_debug("Registering LocalPlus bus FIFO driver\n");
+ return of_register_platform_driver(&mpc52xx_lpbfifo_driver);
+}
+module_init(mpc52xx_lpbfifo_init);
+
+static void __exit mpc52xx_lpbfifo_exit(void)
+{
+ pr_debug("Unregistering LocalPlus bus FIFO driver\n");
+ of_unregister_platform_driver(&mpc52xx_lpbfifo_driver);
+}
+module_exit(mpc52xx_lpbfifo_exit);
^ permalink raw reply related
* [PATCH v3] powerpc/5200: add general purpose timer API for the MPC5200
From: Grant Likely @ 2009-06-18 2:39 UTC (permalink / raw)
To: linuxppc-dev
From: Grant Likely <grant.likely@secretlab.ca>
This patch adds an interface for controlling the timer function of the
MPC5200 GPT devices.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
arch/powerpc/include/asm/mpc52xx.h | 7 ++
arch/powerpc/platforms/52xx/mpc52xx_gpt.c | 133 +++++++++++++++++++++++++++--
2 files changed, 130 insertions(+), 10 deletions(-)
diff --git a/arch/powerpc/include/asm/mpc52xx.h b/arch/powerpc/include/asm/mpc52xx.h
index 1b4f697..6716850 100644
--- a/arch/powerpc/include/asm/mpc52xx.h
+++ b/arch/powerpc/include/asm/mpc52xx.h
@@ -276,6 +276,13 @@ extern int mpc52xx_set_psc_clkdiv(int psc_id, int clkdiv);
extern unsigned int mpc52xx_get_xtal_freq(struct device_node *node);
extern void mpc52xx_restart(char *cmd);
+/* mpc52xx_gpt.c */
+struct mpc52xx_gpt_priv;
+extern struct mpc52xx_gpt_priv *mpc52xx_gpt_from_irq(int irq);
+extern int mpc52xx_gpt_start_timer(struct mpc52xx_gpt_priv *gpt, int period,
+ int continuous);
+extern void mpc52xx_gpt_stop_timer(struct mpc52xx_gpt_priv *gpt);
+
/* mpc52xx_pic.c */
extern void mpc52xx_init_irq(void);
extern unsigned int mpc52xx_get_irq(void);
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
index bfbcd41..2c3fa13 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
@@ -46,13 +46,17 @@
* the output mode. This driver does not change the output mode setting.
*/
+#include <linux/device.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/of_gpio.h>
#include <linux/kernel.h>
+#include <asm/div64.h>
#include <asm/mpc52xx.h>
MODULE_DESCRIPTION("Freescale MPC52xx gpt driver");
@@ -68,16 +72,21 @@ MODULE_LICENSE("GPL");
* @irqhost: Pointer to irq_host instance; used when IRQ mode is supported
*/
struct mpc52xx_gpt_priv {
+ struct list_head list; /* List of all GPT devices */
struct device *dev;
struct mpc52xx_gpt __iomem *regs;
spinlock_t lock;
struct irq_host *irqhost;
+ u32 ipb_freq;
#if defined(CONFIG_GPIOLIB)
struct of_gpio_chip of_gc;
#endif
};
+LIST_HEAD(mpc52xx_gpt_list);
+DEFINE_MUTEX(mpc52xx_gpt_list_mutex);
+
#define MPC52xx_GPT_MODE_MS_MASK (0x07)
#define MPC52xx_GPT_MODE_MS_IC (0x01)
#define MPC52xx_GPT_MODE_MS_OC (0x02)
@@ -88,6 +97,9 @@ struct mpc52xx_gpt_priv {
#define MPC52xx_GPT_MODE_GPIO_OUT_LOW (0x20)
#define MPC52xx_GPT_MODE_GPIO_OUT_HIGH (0x30)
+#define MPC52xx_GPT_MODE_COUNTER_ENABLE (0x1000)
+#define MPC52xx_GPT_MODE_CONTINUOUS (0x0400)
+#define MPC52xx_GPT_MODE_OPEN_DRAIN (0x0200)
#define MPC52xx_GPT_MODE_IRQ_EN (0x0100)
#define MPC52xx_GPT_MODE_ICT_MASK (0x030000)
@@ -190,7 +202,7 @@ static int mpc52xx_gpt_irq_xlate(struct irq_host *h, struct device_node *ct,
dev_dbg(gpt->dev, "%s: flags=%i\n", __func__, intspec[0]);
- if ((intsize < 1) || (intspec[0] < 1) || (intspec[0] > 3)) {
+ if ((intsize < 1) || (intspec[0] > 3)) {
dev_err(gpt->dev, "bad irq specifier in %s\n", ct->full_name);
return -EINVAL;
}
@@ -211,13 +223,11 @@ mpc52xx_gpt_irq_setup(struct mpc52xx_gpt_priv *gpt, struct device_node *node)
{
int cascade_virq;
unsigned long flags;
-
- /* Only setup cascaded IRQ if device tree claims the GPT is
- * an interrupt controller */
- if (!of_find_property(node, "interrupt-controller", NULL))
- return;
+ u32 mode;
cascade_virq = irq_of_parse_and_map(node, 0);
+ if (!cascade_virq)
+ return;
gpt->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR, 1,
&mpc52xx_gpt_irq_ops, -1);
@@ -227,14 +237,16 @@ mpc52xx_gpt_irq_setup(struct mpc52xx_gpt_priv *gpt, struct device_node *node)
}
gpt->irqhost->host_data = gpt;
-
set_irq_data(cascade_virq, gpt);
set_irq_chained_handler(cascade_virq, mpc52xx_gpt_irq_cascade);
- /* Set to Input Capture mode */
+ /* If the GPT is currently disabled, then change it to be in Input
+ * Capture mode. If the mode is non-zero, then the pin could be
+ * already in use for something. */
spin_lock_irqsave(&gpt->lock, flags);
- clrsetbits_be32(&gpt->regs->mode, MPC52xx_GPT_MODE_MS_MASK,
- MPC52xx_GPT_MODE_MS_IC);
+ mode = in_be32(&gpt->regs->mode);
+ if ((mode & MPC52xx_GPT_MODE_MS_MASK) == 0)
+ out_be32(&gpt->regs->mode, mode | MPC52xx_GPT_MODE_MS_IC);
spin_unlock_irqrestore(&gpt->lock, flags);
dev_dbg(gpt->dev, "%s() complete. virq=%i\n", __func__, cascade_virq);
@@ -335,6 +347,102 @@ static void
mpc52xx_gpt_gpio_setup(struct mpc52xx_gpt_priv *p, struct device_node *np) { }
#endif /* defined(CONFIG_GPIOLIB) */
+/***********************************************************************
+ * Timer API
+ */
+
+/**
+ * mpc52xx_gpt_from_irq - Return the GPT device associated with an IRQ number
+ * @irq: irq of timer.
+ */
+struct mpc52xx_gpt_priv *mpc52xx_gpt_from_irq(int irq)
+{
+ struct mpc52xx_gpt_priv *gpt;
+ struct list_head *pos;
+
+ /* Iterate over the list of timers looking for a matching device */
+ mutex_lock(&mpc52xx_gpt_list_mutex);
+ list_for_each(pos, &mpc52xx_gpt_list) {
+ gpt = container_of(pos, struct mpc52xx_gpt_priv, list);
+ if (gpt->irqhost && irq == irq_linear_revmap(gpt->irqhost, 0)) {
+ mutex_unlock(&mpc52xx_gpt_list_mutex);
+ return gpt;
+ }
+ }
+ mutex_unlock(&mpc52xx_gpt_list_mutex);
+
+ return NULL;
+}
+EXPORT_SYMBOL(mpc52xx_gpt_from_irq);
+
+/**
+ * mpc52xx_gpt_start_timer - Set and enable the GPT timer
+ * @gpt: Pointer to gpt private data structure
+ * @period: period of timer
+ * @continuous: set to 1 to make timer continuous free running
+ *
+ * An interrupt will be generated every time the timer fires
+ */
+int mpc52xx_gpt_start_timer(struct mpc52xx_gpt_priv *gpt, int period,
+ int continuous)
+{
+ u32 clear, set;
+ u64 clocks;
+ u32 prescale;
+ unsigned long flags;
+
+ clear = MPC52xx_GPT_MODE_MS_MASK | MPC52xx_GPT_MODE_CONTINUOUS;
+ set = MPC52xx_GPT_MODE_MS_GPIO | MPC52xx_GPT_MODE_COUNTER_ENABLE;
+ if (continuous)
+ set |= MPC52xx_GPT_MODE_CONTINUOUS;
+
+ /* Determine the number of clocks in the requested period. 64 bit
+ * arithmatic is done here to preserve the precision until the value
+ * is scaled back down into the u32 range. Period is in 'ns', bus
+ * frequency is in Hz. */
+ clocks = (u64)period * (u64)gpt->ipb_freq;
+ do_div(clocks, 1000000000); /* Scale it down to ns range */
+
+ /* This device cannot handle a clock count greater than 32 bits */
+ if (clocks > 0xffffffff)
+ return -EINVAL;
+
+ /* Calculate the prescaler and count values from the clocks value.
+ * 'clocks' is the number of clock ticks in the period. The timer
+ * has 16 bit precision and a 16 bit prescaler. Prescaler is
+ * calculated by integer dividing the clocks by 0x10000 (shifting
+ * down 16 bits) to obtain the smallest possible divisor for clocks
+ * to get a 16 bit count value.
+ *
+ * Note: the prescale register is '1' based, not '0' based. ie. a
+ * value of '1' means divide the clock by one. 0xffff divides the
+ * clock by 0xffff. '0x0000' does not divide by zero, but wraps
+ * around and divides by 0x10000. That is why prescale must be
+ * a u32 variable, not a u16, for this calculation. */
+ prescale = (clocks >> 16) + 1;
+ do_div(clocks, prescale);
+ if (clocks > 0xffff) {
+ pr_err("calculation error; prescale:%x clocks:%llx\n",
+ prescale, clocks);
+ return -EINVAL;
+ }
+
+ /* Set and enable the timer */
+ spin_lock_irqsave(&gpt->lock, flags);
+ out_be32(&gpt->regs->count, prescale << 16 | clocks);
+ clrsetbits_be32(&gpt->regs->mode, clear, set);
+ spin_unlock_irqrestore(&gpt->lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(mpc52xx_gpt_start_timer);
+
+void mpc52xx_gpt_stop_timer(struct mpc52xx_gpt_priv *gpt)
+{
+ clrbits32(&gpt->regs->mode, MPC52xx_GPT_MODE_COUNTER_ENABLE);
+}
+EXPORT_SYMBOL(mpc52xx_gpt_stop_timer);
+
/* ---------------------------------------------------------------------
* of_platform bus binding code
*/
@@ -349,6 +457,7 @@ static int __devinit mpc52xx_gpt_probe(struct of_device *ofdev,
spin_lock_init(&gpt->lock);
gpt->dev = &ofdev->dev;
+ gpt->ipb_freq = mpc5xxx_get_bus_frequency(ofdev->node);
gpt->regs = of_iomap(ofdev->node, 0);
if (!gpt->regs) {
kfree(gpt);
@@ -360,6 +469,10 @@ static int __devinit mpc52xx_gpt_probe(struct of_device *ofdev,
mpc52xx_gpt_gpio_setup(gpt, ofdev->node);
mpc52xx_gpt_irq_setup(gpt, ofdev->node);
+ mutex_lock(&mpc52xx_gpt_list_mutex);
+ list_add(&gpt->list, &mpc52xx_gpt_list);
+ mutex_unlock(&mpc52xx_gpt_list_mutex);
+
return 0;
}
^ permalink raw reply related
* Re: [PATCH 0/2] Revert and reimplement Add SGMII support to UCC GETH
From: David Miller @ 2009-06-18 1:53 UTC (permalink / raw)
To: grant.likely
Cc: sachinp, sfr, netdev, linux-kernel, Linuxppc-dev, linux-next, ntl,
Haiying.Wang, leoli, subrata, balbir
In-Reply-To: <20090617231306.7051.56146.stgit@localhost.localdomain>
From: Grant Likely <grant.likely@secretlab.ca>
Date: Wed, 17 Jun 2009 17:15:58 -0600
> (REPOST; I messed up an email address first time around and apparently my
> posting got rejected. If you've already received this message, then
> I apologize for the noise)
>
> Here is a fix for the build failure discovered during the 2.6.31 merge
> window on ucc_geth.c. I decided to revert and reapply a fixed version
> of the patch to make the new version easier to review and bisect if I
> got the fixup wrong. I've compile tested both patches, but I do not have
> hardware to run test.
>
> Haiying, please confirm that I haven't horribly trashed your hard work
> with my changes.
I've applied these to net-next-2.6, thanks!
^ permalink raw reply
* Re: [PATCH 1/6] perf_counter: powerpc: Enable use of software counters on 32-bit powerpc
From: Paul Mackerras @ 2009-06-17 23:27 UTC (permalink / raw)
To: Ingo Molnar; +Cc: linuxppc-dev, Peter Zijlstra, linux-kernel
In-Reply-To: <20090617142151.GB6846@elte.hu>
Ingo Molnar writes:
> Note, i've created a new branch, tip:perfcounters/powerpc, so we can
> keep these things separate and Ben can pull them too. I see there
> was some review feedback - do you want to send a v2 version perhaps?
Kumar's comments seemed to me to be wanting changes to accommodate
code that doesn't exist yet, so I think those changes should be done
later when that code exists and we know exactly what is needed. So
the current patches are fine as-is IMO.
Paul.
^ permalink raw reply
* Re: [PATCH 5/6] perf_counter: powerpc: Add processor back-end for MPC7450 family
From: Paul Mackerras @ 2009-06-17 23:24 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-dev, Ingo Molnar, Peter Zijlstra, linux-kernel
In-Reply-To: <34BD6A89-A05E-40CC-A495-017BFB08B796@kernel.crashing.org>
Kumar Gala writes:
> This should be something like:
>
> obj64-$(CONFIG_PPC_PERF_CTRS)-$(PPC_BOOK3S_64)
>
> > +obj32-$(CONFIG_PPC_PERF_CTRS) += mpc7450-pmu.o
>
> obj32-$(CONFIG_PPC_PERF_CTRS)-$(PPC_BOOK3S_32)
>
> Or use new Kconfig types as I suggested on patch 1/6
Feel free to send a patch making those changes along with adding the
code to support the Freescale embedded PMU. :)
Paul.
^ permalink raw reply
* Re: [PATCH 1/6] perf_counter: powerpc: Enable use of software counters on 32-bit powerpc
From: Paul Mackerras @ 2009-06-17 23:22 UTC (permalink / raw)
To: Kumar Gala; +Cc: Ingo Molnar, Peter Zijlstra, linux-kernel, linuxppc-dev
In-Reply-To: <A731338A-E954-46D9-8BF7-6E74C797209C@kernel.crashing.org>
Kumar Gala writes:
> On Jun 17, 2009, at 6:50 AM, Paul Mackerras wrote:
> > +config PPC_HAVE_PMU_SUPPORT
> > + bool
>
> what does this mean?
At the moment it means that arch/powerpc/kernel/perf_counters.c works
for at least some processors in the selected processor family.
> > +
> > +config PPC_PERF_CTRS
> > + def_bool y
> > + depends on PERF_COUNTERS && PPC_HAVE_PMU_SUPPORT
> > + help
> > + This enables the powerpc-specific perf_counter back-end.
>
> Can we distinguish between the two different architected perf counters
> programming models to start with. Maybe something like:
>
> PPC_BOOK3S_PERF_CTRS and PPC_BOOK3E_PERF_CTRS (or
> PPC_SERVER_PERF_CTRS / PPC_EMB_PERF_CTRS)
We can do that once we have code to support the Freescale embedded PMU
and we know how much of arch/powerpc/kernel/perf_counters.c is or
isn't useful there. We don't have to get to the final state in one
patch. I'd rather put this patch in as-is and then see a patch series
that adds the Freescale embedded PMU support and makes whatever
Kconfig changes are necessary later.
Paul.
^ permalink raw reply
* [PATCH 2/2] net/ucc_geth: Add SGMII support for UCC GETH driver
From: Grant Likely @ 2009-06-17 23:16 UTC (permalink / raw)
To: Stephen Rothwell, subrata, netdev
Cc: Sachin P Sant, linux-kernel, Linuxppc-dev, Linux-Next,
Nathan Lynch, Haiying Wang, Li Yang, davem, Balbir Singh
In-Reply-To: <20090617231306.7051.56146.stgit@localhost.localdomain>
From: Haiying Wang <Haiying.Wang@freescale.com>
-- derived from reverted commit 047584ce94108012288554a5f84585d792cc7f8f
-- reworked by Grant Likely to play nice with commit:
"net: Rework ucc_geth driver to use of_mdio infrastructure"
(0b9da337dca972e7a4144e298ec3adb8f244d4a4)
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
arch/powerpc/include/asm/qe.h | 2 +
drivers/net/ucc_geth.c | 58 ++++++++++++++++++++++++++++++++++++++++-
drivers/net/ucc_geth.h | 28 +++++++++++++++++++-
3 files changed, 86 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h
index e0faf33..157c5ca 100644
--- a/arch/powerpc/include/asm/qe.h
+++ b/arch/powerpc/include/asm/qe.h
@@ -675,6 +675,8 @@ struct ucc_slow_pram {
#define UCC_GETH_UPSMR_RMM 0x00001000
#define UCC_GETH_UPSMR_CAM 0x00000400
#define UCC_GETH_UPSMR_BRO 0x00000200
+#define UCC_GETH_UPSMR_SMM 0x00000080
+#define UCC_GETH_UPSMR_SGMM 0x00000020
/* UCC Transmit On Demand Register (UTODR) */
#define UCC_SLOW_TOD 0x8000
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 5118993..40c6eba 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2006-2007 Freescale Semicondutor, Inc. All rights reserved.
+ * Copyright (C) 2006-2009 Freescale Semicondutor, Inc. All rights reserved.
*
* Author: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
@@ -1410,6 +1410,9 @@ static int adjust_enet_interface(struct ucc_geth_private *ugeth)
(ugeth->phy_interface == PHY_INTERFACE_MODE_RTBI)) {
upsmr |= UCC_GETH_UPSMR_TBIM;
}
+ if ((ugeth->phy_interface == PHY_INTERFACE_MODE_SGMII))
+ upsmr |= UCC_GETH_UPSMR_SGMM;
+
out_be32(&uf_regs->upsmr, upsmr);
/* Disable autonegotiation in tbi mode, because by default it
@@ -1531,6 +1534,49 @@ static void adjust_link(struct net_device *dev)
spin_unlock_irqrestore(&ugeth->lock, flags);
}
+/* Initialize TBI PHY interface for communicating with the
+ * SERDES lynx PHY on the chip. We communicate with this PHY
+ * through the MDIO bus on each controller, treating it as a
+ * "normal" PHY at the address found in the UTBIPA register. We assume
+ * that the UTBIPA register is valid. Either the MDIO bus code will set
+ * it to a value that doesn't conflict with other PHYs on the bus, or the
+ * value doesn't matter, as there are no other PHYs on the bus.
+ */
+static void uec_configure_serdes(struct net_device *dev)
+{
+ struct ucc_geth_private *ugeth = netdev_priv(dev);
+ struct ucc_geth_info *ug_info = ugeth->ug_info;
+ struct phy_device *tbiphy;
+
+ if (!ug_info->tbi_node) {
+ dev_warn(&dev->dev, "SGMII mode requires that the device "
+ "tree specify a tbi-handle\n");
+ return;
+ }
+
+ tbiphy = of_phy_find_device(ug_info->tbi_node);
+ if (!tbiphy) {
+ dev_err(&dev->dev, "error: Could not get TBI device\n");
+ return;
+ }
+
+ /*
+ * If the link is already up, we must already be ok, and don't need to
+ * configure and reset the TBI<->SerDes link. Maybe U-Boot configured
+ * everything for us? Resetting it takes the link down and requires
+ * several seconds for it to come back.
+ */
+ if (phy_read(tbiphy, ENET_TBI_MII_SR) & TBISR_LSTATUS)
+ return;
+
+ /* Single clk mode, mii mode off(for serdes communication) */
+ phy_write(tbiphy, ENET_TBI_MII_ANA, TBIANA_SETTINGS);
+
+ phy_write(tbiphy, ENET_TBI_MII_TBICON, TBICON_CLK_SELECT);
+
+ phy_write(tbiphy, ENET_TBI_MII_CR, TBICR_SETTINGS);
+}
+
/* Configure the PHY for dev.
* returns 0 if success. -1 if failure
*/
@@ -1554,6 +1600,9 @@ static int init_phy(struct net_device *dev)
return -ENODEV;
}
+ if (priv->phy_interface == PHY_INTERFACE_MODE_SGMII)
+ uec_configure_serdes(dev);
+
phydev->supported &= (ADVERTISED_10baseT_Half |
ADVERTISED_10baseT_Full |
ADVERTISED_100baseT_Half |
@@ -3531,6 +3580,8 @@ static phy_interface_t to_phy_interface(const char *phy_connection_type)
return PHY_INTERFACE_MODE_RGMII_RXID;
if (strcasecmp(phy_connection_type, "rtbi") == 0)
return PHY_INTERFACE_MODE_RTBI;
+ if (strcasecmp(phy_connection_type, "sgmii") == 0)
+ return PHY_INTERFACE_MODE_SGMII;
return PHY_INTERFACE_MODE_MII;
}
@@ -3575,6 +3626,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
PHY_INTERFACE_MODE_RMII, PHY_INTERFACE_MODE_RGMII,
PHY_INTERFACE_MODE_GMII, PHY_INTERFACE_MODE_RGMII,
PHY_INTERFACE_MODE_TBI, PHY_INTERFACE_MODE_RTBI,
+ PHY_INTERFACE_MODE_SGMII,
};
ugeth_vdbg("%s: IN", __func__);
@@ -3666,6 +3718,9 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
}
ug_info->phy_node = phy;
+ /* Find the TBI PHY node. If it's not there, we don't support SGMII */
+ ug_info->tbi_node = of_parse_phandle(np, "tbi-handle", 0);
+
/* get the phy interface type, or default to MII */
prop = of_get_property(np, "phy-connection-type", NULL);
if (!prop) {
@@ -3690,6 +3745,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
case PHY_INTERFACE_MODE_RGMII_TXID:
case PHY_INTERFACE_MODE_TBI:
case PHY_INTERFACE_MODE_RTBI:
+ case PHY_INTERFACE_MODE_SGMII:
max_speed = SPEED_1000;
break;
default:
diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h
index 8160276..195ab26 100644
--- a/drivers/net/ucc_geth.h
+++ b/drivers/net/ucc_geth.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ * Copyright (C) Freescale Semicondutor, Inc. 2006-2009. All rights reserved.
*
* Author: Shlomi Gridish <gridish@freescale.com>
*
@@ -193,6 +193,31 @@ struct ucc_geth {
#define ENET_TBI_MII_JD 0x10 /* Jitter diagnostics */
#define ENET_TBI_MII_TBICON 0x11 /* TBI control */
+/* TBI MDIO register bit fields*/
+#define TBISR_LSTATUS 0x0004
+#define TBICON_CLK_SELECT 0x0020
+#define TBIANA_ASYMMETRIC_PAUSE 0x0100
+#define TBIANA_SYMMETRIC_PAUSE 0x0080
+#define TBIANA_HALF_DUPLEX 0x0040
+#define TBIANA_FULL_DUPLEX 0x0020
+#define TBICR_PHY_RESET 0x8000
+#define TBICR_ANEG_ENABLE 0x1000
+#define TBICR_RESTART_ANEG 0x0200
+#define TBICR_FULL_DUPLEX 0x0100
+#define TBICR_SPEED1_SET 0x0040
+
+#define TBIANA_SETTINGS ( \
+ TBIANA_ASYMMETRIC_PAUSE \
+ | TBIANA_SYMMETRIC_PAUSE \
+ | TBIANA_FULL_DUPLEX \
+ )
+#define TBICR_SETTINGS ( \
+ TBICR_PHY_RESET \
+ | TBICR_ANEG_ENABLE \
+ | TBICR_FULL_DUPLEX \
+ | TBICR_SPEED1_SET \
+ )
+
/* UCC GETH MACCFG1 (MAC Configuration 1 Register) */
#define MACCFG1_FLOW_RX 0x00000020 /* Flow Control
Rx */
@@ -1100,6 +1125,7 @@ struct ucc_geth_info {
u16 pausePeriod;
u16 extensionField;
struct device_node *phy_node;
+ struct device_node *tbi_node;
u8 weightfactor[NUM_TX_QUEUES];
u8 interruptcoalescingmaxvalue[NUM_RX_QUEUES];
u8 l2qt[UCC_GETH_VLAN_PRIORITY_MAX];
^ permalink raw reply related
* [PATCH 1/2] Revert "net/ucc_geth: Add SGMII support for UEC GETH driver"
From: Grant Likely @ 2009-06-17 23:16 UTC (permalink / raw)
To: Stephen Rothwell, subrata, netdev
Cc: Sachin P Sant, linux-kernel, Linuxppc-dev, Linux-Next,
Nathan Lynch, Haiying Wang, Li Yang, davem, Balbir Singh
In-Reply-To: <20090617231306.7051.56146.stgit@localhost.localdomain>
From: Grant Likely <grant.likely@secretlab.ca>
This reverts commit 047584ce94108012288554a5f84585d792cc7f8f.
This patch meshes badly with "net: Rework ucc_geth driver to use
of_mdio infrastructure" (0b9da337dca972e7a4144e298ec3adb8f244d4a4).
Since most of the patch needs to be reworked, it is clearer to revert
the patch and then apply the corrected version
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
arch/powerpc/include/asm/qe.h | 2 -
drivers/net/ucc_geth.c | 79 +----------------------------------------
drivers/net/ucc_geth.h | 28 +--------------
3 files changed, 2 insertions(+), 107 deletions(-)
diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h
index 157c5ca..e0faf33 100644
--- a/arch/powerpc/include/asm/qe.h
+++ b/arch/powerpc/include/asm/qe.h
@@ -675,8 +675,6 @@ struct ucc_slow_pram {
#define UCC_GETH_UPSMR_RMM 0x00001000
#define UCC_GETH_UPSMR_CAM 0x00000400
#define UCC_GETH_UPSMR_BRO 0x00000200
-#define UCC_GETH_UPSMR_SMM 0x00000080
-#define UCC_GETH_UPSMR_SGMM 0x00000020
/* UCC Transmit On Demand Register (UTODR) */
#define UCC_SLOW_TOD 0x8000
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index e2f2e91..5118993 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2006-2009 Freescale Semicondutor, Inc. All rights reserved.
+ * Copyright (C) 2006-2007 Freescale Semicondutor, Inc. All rights reserved.
*
* Author: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
@@ -65,8 +65,6 @@
static DEFINE_SPINLOCK(ugeth_lock);
-static void uec_configure_serdes(struct net_device *dev);
-
static struct {
u32 msg_enable;
} debug = { -1 };
@@ -1412,9 +1410,6 @@ static int adjust_enet_interface(struct ucc_geth_private *ugeth)
(ugeth->phy_interface == PHY_INTERFACE_MODE_RTBI)) {
upsmr |= UCC_GETH_UPSMR_TBIM;
}
- if ((ugeth->phy_interface == PHY_INTERFACE_MODE_SGMII))
- upsmr |= UCC_GETH_UPSMR_SGMM;
-
out_be32(&uf_regs->upsmr, upsmr);
/* Disable autonegotiation in tbi mode, because by default it
@@ -1559,9 +1554,6 @@ static int init_phy(struct net_device *dev)
return -ENODEV;
}
- if (priv->phy_interface == PHY_INTERFACE_MODE_SGMII)
- uec_configure_serdes(dev);
-
phydev->supported &= (ADVERTISED_10baseT_Half |
ADVERTISED_10baseT_Full |
ADVERTISED_100baseT_Half |
@@ -1577,41 +1569,7 @@ static int init_phy(struct net_device *dev)
return 0;
}
-/* Initialize TBI PHY interface for communicating with the
- * SERDES lynx PHY on the chip. We communicate with this PHY
- * through the MDIO bus on each controller, treating it as a
- * "normal" PHY at the address found in the UTBIPA register. We assume
- * that the UTBIPA register is valid. Either the MDIO bus code will set
- * it to a value that doesn't conflict with other PHYs on the bus, or the
- * value doesn't matter, as there are no other PHYs on the bus.
- */
-static void uec_configure_serdes(struct net_device *dev)
-{
- struct ucc_geth_private *ugeth = netdev_priv(dev);
-
- if (!ugeth->tbiphy) {
- printk(KERN_WARNING "SGMII mode requires that the device "
- "tree specify a tbi-handle\n");
- return;
- }
-
- /*
- * If the link is already up, we must already be ok, and don't need to
- * configure and reset the TBI<->SerDes link. Maybe U-Boot configured
- * everything for us? Resetting it takes the link down and requires
- * several seconds for it to come back.
- */
- if (phy_read(ugeth->tbiphy, ENET_TBI_MII_SR) & TBISR_LSTATUS)
- return;
-
- /* Single clk mode, mii mode off(for serdes communication) */
- phy_write(ugeth->tbiphy, ENET_TBI_MII_ANA, TBIANA_SETTINGS);
- phy_write(ugeth->tbiphy, ENET_TBI_MII_TBICON, TBICON_CLK_SELECT);
-
- phy_write(ugeth->tbiphy, ENET_TBI_MII_CR, TBICR_SETTINGS);
-
-}
static int ugeth_graceful_stop_tx(struct ucc_geth_private *ugeth)
{
@@ -3573,8 +3531,6 @@ static phy_interface_t to_phy_interface(const char *phy_connection_type)
return PHY_INTERFACE_MODE_RGMII_RXID;
if (strcasecmp(phy_connection_type, "rtbi") == 0)
return PHY_INTERFACE_MODE_RTBI;
- if (strcasecmp(phy_connection_type, "sgmii") == 0)
- return PHY_INTERFACE_MODE_SGMII;
return PHY_INTERFACE_MODE_MII;
}
@@ -3619,7 +3575,6 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
PHY_INTERFACE_MODE_RMII, PHY_INTERFACE_MODE_RGMII,
PHY_INTERFACE_MODE_GMII, PHY_INTERFACE_MODE_RGMII,
PHY_INTERFACE_MODE_TBI, PHY_INTERFACE_MODE_RTBI,
- PHY_INTERFACE_MODE_SGMII,
};
ugeth_vdbg("%s: IN", __func__);
@@ -3735,7 +3690,6 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
case PHY_INTERFACE_MODE_RGMII_TXID:
case PHY_INTERFACE_MODE_TBI:
case PHY_INTERFACE_MODE_RTBI:
- case PHY_INTERFACE_MODE_SGMII:
max_speed = SPEED_1000;
break;
default:
@@ -3818,37 +3772,6 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
ugeth->ndev = dev;
ugeth->node = np;
- /* Find the TBI PHY. If it's not there, we don't support SGMII */
- ph = of_get_property(np, "tbi-handle", NULL);
- if (ph) {
- struct device_node *tbi = of_find_node_by_phandle(*ph);
- struct of_device *ofdev;
- struct mii_bus *bus;
- const unsigned int *id;
-
- if (!tbi)
- return 0;
-
- mdio = of_get_parent(tbi);
- if (!mdio)
- return 0;
-
- ofdev = of_find_device_by_node(mdio);
-
- of_node_put(mdio);
-
- id = of_get_property(tbi, "reg", NULL);
- if (!id)
- return 0;
- of_node_put(tbi);
-
- bus = dev_get_drvdata(&ofdev->dev);
- if (!bus)
- return 0;
-
- ugeth->tbiphy = bus->phy_map[*id];
- }
-
return 0;
}
diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h
index 5beba4c..8160276 100644
--- a/drivers/net/ucc_geth.h
+++ b/drivers/net/ucc_geth.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) Freescale Semicondutor, Inc. 2006-2009. All rights reserved.
+ * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
*
* Author: Shlomi Gridish <gridish@freescale.com>
*
@@ -193,31 +193,6 @@ struct ucc_geth {
#define ENET_TBI_MII_JD 0x10 /* Jitter diagnostics */
#define ENET_TBI_MII_TBICON 0x11 /* TBI control */
-/* TBI MDIO register bit fields*/
-#define TBISR_LSTATUS 0x0004
-#define TBICON_CLK_SELECT 0x0020
-#define TBIANA_ASYMMETRIC_PAUSE 0x0100
-#define TBIANA_SYMMETRIC_PAUSE 0x0080
-#define TBIANA_HALF_DUPLEX 0x0040
-#define TBIANA_FULL_DUPLEX 0x0020
-#define TBICR_PHY_RESET 0x8000
-#define TBICR_ANEG_ENABLE 0x1000
-#define TBICR_RESTART_ANEG 0x0200
-#define TBICR_FULL_DUPLEX 0x0100
-#define TBICR_SPEED1_SET 0x0040
-
-#define TBIANA_SETTINGS ( \
- TBIANA_ASYMMETRIC_PAUSE \
- | TBIANA_SYMMETRIC_PAUSE \
- | TBIANA_FULL_DUPLEX \
- )
-#define TBICR_SETTINGS ( \
- TBICR_PHY_RESET \
- | TBICR_ANEG_ENABLE \
- | TBICR_FULL_DUPLEX \
- | TBICR_SPEED1_SET \
- )
-
/* UCC GETH MACCFG1 (MAC Configuration 1 Register) */
#define MACCFG1_FLOW_RX 0x00000020 /* Flow Control
Rx */
@@ -1213,7 +1188,6 @@ struct ucc_geth_private {
struct ugeth_mii_info *mii_info;
struct phy_device *phydev;
- struct phy_device *tbiphy;
phy_interface_t phy_interface;
int max_speed;
uint32_t msg_enable;
^ permalink raw reply related
* [PATCH 0/2] Revert and reimplement Add SGMII support to UCC GETH
From: Grant Likely @ 2009-06-17 23:15 UTC (permalink / raw)
To: Stephen Rothwell, subrata, netdev
Cc: Sachin P Sant, linux-kernel, Linuxppc-dev, Linux-Next,
Nathan Lynch, Haiying Wang, Li Yang, davem, Balbir Singh
(REPOST; I messed up an email address first time around and apparently my
posting got rejected. If you've already received this message, then
I apologize for the noise)
Here is a fix for the build failure discovered during the 2.6.31 merge
window on ucc_geth.c. I decided to revert and reapply a fixed version
of the patch to make the new version easier to review and bisect if I
got the fixup wrong. I've compile tested both patches, but I do not have
hardware to run test.
Haiying, please confirm that I haven't horribly trashed your hard work
with my changes.
For anyone interested, I've also pushed these patches out to the -next-net
branch of my git tree:
The following changes since commit 65795efbd380a832ae508b04dba8f8e53f0b84d9:
Linus Torvalds (1):
Merge branch 'next-i2c' of git://aeryn.fluff.org.uk/bjdooks/linux
are available in the git repository at:
git://git.secretlab.ca/git/linux-2.6 next-net
Grant Likely (1):
Revert "net/ucc_geth: Add SGMII support for UEC GETH driver"
Haiying Wang (1):
net/ucc_geth: Add SGMII support for UCC GETH driver
drivers/net/ucc_geth.c | 113 +++++++++++++++++++----------------------------
drivers/net/ucc_geth.h | 2 +-
2 files changed, 47 insertions(+), 68 deletions(-)
--
Grant Likely, B.Sc. P.Eng.
Secret Lab Technologies Ltd.
^ permalink raw reply
* [PATCH 2/2] net/ucc_geth: Add SGMII support for UCC GETH driver
From: Grant Likely @ 2009-06-17 21:09 UTC (permalink / raw)
To: Stephen Rothwell, subrata, netdev
Cc: Sachin P Sant, linux-kernel, Linuxppc-dev, Linux-Next,
Nathan Lynch, Haiying Wang, Li Yang, David S. Miller,
Balbir Singh
In-Reply-To: <20090617210356.18435.96410.stgit@localhost.localdomain>
From: Haiying Wang <Haiying.Wang@freescale.com>
-- derived from reverted commit 047584ce94108012288554a5f84585d792cc7f8f
-- reworked by Grant Likely to play nice with commit:
"net: Rework ucc_geth driver to use of_mdio infrastructure"
(0b9da337dca972e7a4144e298ec3adb8f244d4a4)
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
arch/powerpc/include/asm/qe.h | 2 +
drivers/net/ucc_geth.c | 58 ++++++++++++++++++++++++++++++++++++++++-
drivers/net/ucc_geth.h | 28 +++++++++++++++++++-
3 files changed, 86 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h
index e0faf33..157c5ca 100644
--- a/arch/powerpc/include/asm/qe.h
+++ b/arch/powerpc/include/asm/qe.h
@@ -675,6 +675,8 @@ struct ucc_slow_pram {
#define UCC_GETH_UPSMR_RMM 0x00001000
#define UCC_GETH_UPSMR_CAM 0x00000400
#define UCC_GETH_UPSMR_BRO 0x00000200
+#define UCC_GETH_UPSMR_SMM 0x00000080
+#define UCC_GETH_UPSMR_SGMM 0x00000020
/* UCC Transmit On Demand Register (UTODR) */
#define UCC_SLOW_TOD 0x8000
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 5118993..40c6eba 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2006-2007 Freescale Semicondutor, Inc. All rights reserved.
+ * Copyright (C) 2006-2009 Freescale Semicondutor, Inc. All rights reserved.
*
* Author: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
@@ -1410,6 +1410,9 @@ static int adjust_enet_interface(struct ucc_geth_private *ugeth)
(ugeth->phy_interface == PHY_INTERFACE_MODE_RTBI)) {
upsmr |= UCC_GETH_UPSMR_TBIM;
}
+ if ((ugeth->phy_interface == PHY_INTERFACE_MODE_SGMII))
+ upsmr |= UCC_GETH_UPSMR_SGMM;
+
out_be32(&uf_regs->upsmr, upsmr);
/* Disable autonegotiation in tbi mode, because by default it
@@ -1531,6 +1534,49 @@ static void adjust_link(struct net_device *dev)
spin_unlock_irqrestore(&ugeth->lock, flags);
}
+/* Initialize TBI PHY interface for communicating with the
+ * SERDES lynx PHY on the chip. We communicate with this PHY
+ * through the MDIO bus on each controller, treating it as a
+ * "normal" PHY at the address found in the UTBIPA register. We assume
+ * that the UTBIPA register is valid. Either the MDIO bus code will set
+ * it to a value that doesn't conflict with other PHYs on the bus, or the
+ * value doesn't matter, as there are no other PHYs on the bus.
+ */
+static void uec_configure_serdes(struct net_device *dev)
+{
+ struct ucc_geth_private *ugeth = netdev_priv(dev);
+ struct ucc_geth_info *ug_info = ugeth->ug_info;
+ struct phy_device *tbiphy;
+
+ if (!ug_info->tbi_node) {
+ dev_warn(&dev->dev, "SGMII mode requires that the device "
+ "tree specify a tbi-handle\n");
+ return;
+ }
+
+ tbiphy = of_phy_find_device(ug_info->tbi_node);
+ if (!tbiphy) {
+ dev_err(&dev->dev, "error: Could not get TBI device\n");
+ return;
+ }
+
+ /*
+ * If the link is already up, we must already be ok, and don't need to
+ * configure and reset the TBI<->SerDes link. Maybe U-Boot configured
+ * everything for us? Resetting it takes the link down and requires
+ * several seconds for it to come back.
+ */
+ if (phy_read(tbiphy, ENET_TBI_MII_SR) & TBISR_LSTATUS)
+ return;
+
+ /* Single clk mode, mii mode off(for serdes communication) */
+ phy_write(tbiphy, ENET_TBI_MII_ANA, TBIANA_SETTINGS);
+
+ phy_write(tbiphy, ENET_TBI_MII_TBICON, TBICON_CLK_SELECT);
+
+ phy_write(tbiphy, ENET_TBI_MII_CR, TBICR_SETTINGS);
+}
+
/* Configure the PHY for dev.
* returns 0 if success. -1 if failure
*/
@@ -1554,6 +1600,9 @@ static int init_phy(struct net_device *dev)
return -ENODEV;
}
+ if (priv->phy_interface == PHY_INTERFACE_MODE_SGMII)
+ uec_configure_serdes(dev);
+
phydev->supported &= (ADVERTISED_10baseT_Half |
ADVERTISED_10baseT_Full |
ADVERTISED_100baseT_Half |
@@ -3531,6 +3580,8 @@ static phy_interface_t to_phy_interface(const char *phy_connection_type)
return PHY_INTERFACE_MODE_RGMII_RXID;
if (strcasecmp(phy_connection_type, "rtbi") == 0)
return PHY_INTERFACE_MODE_RTBI;
+ if (strcasecmp(phy_connection_type, "sgmii") == 0)
+ return PHY_INTERFACE_MODE_SGMII;
return PHY_INTERFACE_MODE_MII;
}
@@ -3575,6 +3626,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
PHY_INTERFACE_MODE_RMII, PHY_INTERFACE_MODE_RGMII,
PHY_INTERFACE_MODE_GMII, PHY_INTERFACE_MODE_RGMII,
PHY_INTERFACE_MODE_TBI, PHY_INTERFACE_MODE_RTBI,
+ PHY_INTERFACE_MODE_SGMII,
};
ugeth_vdbg("%s: IN", __func__);
@@ -3666,6 +3718,9 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
}
ug_info->phy_node = phy;
+ /* Find the TBI PHY node. If it's not there, we don't support SGMII */
+ ug_info->tbi_node = of_parse_phandle(np, "tbi-handle", 0);
+
/* get the phy interface type, or default to MII */
prop = of_get_property(np, "phy-connection-type", NULL);
if (!prop) {
@@ -3690,6 +3745,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
case PHY_INTERFACE_MODE_RGMII_TXID:
case PHY_INTERFACE_MODE_TBI:
case PHY_INTERFACE_MODE_RTBI:
+ case PHY_INTERFACE_MODE_SGMII:
max_speed = SPEED_1000;
break;
default:
diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h
index 8160276..195ab26 100644
--- a/drivers/net/ucc_geth.h
+++ b/drivers/net/ucc_geth.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ * Copyright (C) Freescale Semicondutor, Inc. 2006-2009. All rights reserved.
*
* Author: Shlomi Gridish <gridish@freescale.com>
*
@@ -193,6 +193,31 @@ struct ucc_geth {
#define ENET_TBI_MII_JD 0x10 /* Jitter diagnostics */
#define ENET_TBI_MII_TBICON 0x11 /* TBI control */
+/* TBI MDIO register bit fields*/
+#define TBISR_LSTATUS 0x0004
+#define TBICON_CLK_SELECT 0x0020
+#define TBIANA_ASYMMETRIC_PAUSE 0x0100
+#define TBIANA_SYMMETRIC_PAUSE 0x0080
+#define TBIANA_HALF_DUPLEX 0x0040
+#define TBIANA_FULL_DUPLEX 0x0020
+#define TBICR_PHY_RESET 0x8000
+#define TBICR_ANEG_ENABLE 0x1000
+#define TBICR_RESTART_ANEG 0x0200
+#define TBICR_FULL_DUPLEX 0x0100
+#define TBICR_SPEED1_SET 0x0040
+
+#define TBIANA_SETTINGS ( \
+ TBIANA_ASYMMETRIC_PAUSE \
+ | TBIANA_SYMMETRIC_PAUSE \
+ | TBIANA_FULL_DUPLEX \
+ )
+#define TBICR_SETTINGS ( \
+ TBICR_PHY_RESET \
+ | TBICR_ANEG_ENABLE \
+ | TBICR_FULL_DUPLEX \
+ | TBICR_SPEED1_SET \
+ )
+
/* UCC GETH MACCFG1 (MAC Configuration 1 Register) */
#define MACCFG1_FLOW_RX 0x00000020 /* Flow Control
Rx */
@@ -1100,6 +1125,7 @@ struct ucc_geth_info {
u16 pausePeriod;
u16 extensionField;
struct device_node *phy_node;
+ struct device_node *tbi_node;
u8 weightfactor[NUM_TX_QUEUES];
u8 interruptcoalescingmaxvalue[NUM_RX_QUEUES];
u8 l2qt[UCC_GETH_VLAN_PRIORITY_MAX];
^ permalink raw reply related
* [PATCH 1/2] Revert "net/ucc_geth: Add SGMII support for UEC GETH driver"
From: Grant Likely @ 2009-06-17 21:09 UTC (permalink / raw)
To: Stephen Rothwell, subrata, netdev
Cc: Sachin P Sant, linux-kernel, Linuxppc-dev, Linux-Next,
Nathan Lynch, Haiying Wang, Li Yang, David S. Miller,
Balbir Singh
In-Reply-To: <20090617210356.18435.96410.stgit@localhost.localdomain>
From: Grant Likely <grant.likely@secretlab.ca>
This reverts commit 047584ce94108012288554a5f84585d792cc7f8f.
This patch meshes badly with "net: Rework ucc_geth driver to use
of_mdio infrastructure" (0b9da337dca972e7a4144e298ec3adb8f244d4a4).
Since most of the patch needs to be reworked, it is clearer to revert
the patch and then apply the corrected version
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
arch/powerpc/include/asm/qe.h | 2 -
drivers/net/ucc_geth.c | 79 +----------------------------------------
drivers/net/ucc_geth.h | 28 +--------------
3 files changed, 2 insertions(+), 107 deletions(-)
diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h
index 157c5ca..e0faf33 100644
--- a/arch/powerpc/include/asm/qe.h
+++ b/arch/powerpc/include/asm/qe.h
@@ -675,8 +675,6 @@ struct ucc_slow_pram {
#define UCC_GETH_UPSMR_RMM 0x00001000
#define UCC_GETH_UPSMR_CAM 0x00000400
#define UCC_GETH_UPSMR_BRO 0x00000200
-#define UCC_GETH_UPSMR_SMM 0x00000080
-#define UCC_GETH_UPSMR_SGMM 0x00000020
/* UCC Transmit On Demand Register (UTODR) */
#define UCC_SLOW_TOD 0x8000
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index e2f2e91..5118993 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2006-2009 Freescale Semicondutor, Inc. All rights reserved.
+ * Copyright (C) 2006-2007 Freescale Semicondutor, Inc. All rights reserved.
*
* Author: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
@@ -65,8 +65,6 @@
static DEFINE_SPINLOCK(ugeth_lock);
-static void uec_configure_serdes(struct net_device *dev);
-
static struct {
u32 msg_enable;
} debug = { -1 };
@@ -1412,9 +1410,6 @@ static int adjust_enet_interface(struct ucc_geth_private *ugeth)
(ugeth->phy_interface == PHY_INTERFACE_MODE_RTBI)) {
upsmr |= UCC_GETH_UPSMR_TBIM;
}
- if ((ugeth->phy_interface == PHY_INTERFACE_MODE_SGMII))
- upsmr |= UCC_GETH_UPSMR_SGMM;
-
out_be32(&uf_regs->upsmr, upsmr);
/* Disable autonegotiation in tbi mode, because by default it
@@ -1559,9 +1554,6 @@ static int init_phy(struct net_device *dev)
return -ENODEV;
}
- if (priv->phy_interface == PHY_INTERFACE_MODE_SGMII)
- uec_configure_serdes(dev);
-
phydev->supported &= (ADVERTISED_10baseT_Half |
ADVERTISED_10baseT_Full |
ADVERTISED_100baseT_Half |
@@ -1577,41 +1569,7 @@ static int init_phy(struct net_device *dev)
return 0;
}
-/* Initialize TBI PHY interface for communicating with the
- * SERDES lynx PHY on the chip. We communicate with this PHY
- * through the MDIO bus on each controller, treating it as a
- * "normal" PHY at the address found in the UTBIPA register. We assume
- * that the UTBIPA register is valid. Either the MDIO bus code will set
- * it to a value that doesn't conflict with other PHYs on the bus, or the
- * value doesn't matter, as there are no other PHYs on the bus.
- */
-static void uec_configure_serdes(struct net_device *dev)
-{
- struct ucc_geth_private *ugeth = netdev_priv(dev);
-
- if (!ugeth->tbiphy) {
- printk(KERN_WARNING "SGMII mode requires that the device "
- "tree specify a tbi-handle\n");
- return;
- }
-
- /*
- * If the link is already up, we must already be ok, and don't need to
- * configure and reset the TBI<->SerDes link. Maybe U-Boot configured
- * everything for us? Resetting it takes the link down and requires
- * several seconds for it to come back.
- */
- if (phy_read(ugeth->tbiphy, ENET_TBI_MII_SR) & TBISR_LSTATUS)
- return;
-
- /* Single clk mode, mii mode off(for serdes communication) */
- phy_write(ugeth->tbiphy, ENET_TBI_MII_ANA, TBIANA_SETTINGS);
- phy_write(ugeth->tbiphy, ENET_TBI_MII_TBICON, TBICON_CLK_SELECT);
-
- phy_write(ugeth->tbiphy, ENET_TBI_MII_CR, TBICR_SETTINGS);
-
-}
static int ugeth_graceful_stop_tx(struct ucc_geth_private *ugeth)
{
@@ -3573,8 +3531,6 @@ static phy_interface_t to_phy_interface(const char *phy_connection_type)
return PHY_INTERFACE_MODE_RGMII_RXID;
if (strcasecmp(phy_connection_type, "rtbi") == 0)
return PHY_INTERFACE_MODE_RTBI;
- if (strcasecmp(phy_connection_type, "sgmii") == 0)
- return PHY_INTERFACE_MODE_SGMII;
return PHY_INTERFACE_MODE_MII;
}
@@ -3619,7 +3575,6 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
PHY_INTERFACE_MODE_RMII, PHY_INTERFACE_MODE_RGMII,
PHY_INTERFACE_MODE_GMII, PHY_INTERFACE_MODE_RGMII,
PHY_INTERFACE_MODE_TBI, PHY_INTERFACE_MODE_RTBI,
- PHY_INTERFACE_MODE_SGMII,
};
ugeth_vdbg("%s: IN", __func__);
@@ -3735,7 +3690,6 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
case PHY_INTERFACE_MODE_RGMII_TXID:
case PHY_INTERFACE_MODE_TBI:
case PHY_INTERFACE_MODE_RTBI:
- case PHY_INTERFACE_MODE_SGMII:
max_speed = SPEED_1000;
break;
default:
@@ -3818,37 +3772,6 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
ugeth->ndev = dev;
ugeth->node = np;
- /* Find the TBI PHY. If it's not there, we don't support SGMII */
- ph = of_get_property(np, "tbi-handle", NULL);
- if (ph) {
- struct device_node *tbi = of_find_node_by_phandle(*ph);
- struct of_device *ofdev;
- struct mii_bus *bus;
- const unsigned int *id;
-
- if (!tbi)
- return 0;
-
- mdio = of_get_parent(tbi);
- if (!mdio)
- return 0;
-
- ofdev = of_find_device_by_node(mdio);
-
- of_node_put(mdio);
-
- id = of_get_property(tbi, "reg", NULL);
- if (!id)
- return 0;
- of_node_put(tbi);
-
- bus = dev_get_drvdata(&ofdev->dev);
- if (!bus)
- return 0;
-
- ugeth->tbiphy = bus->phy_map[*id];
- }
-
return 0;
}
diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h
index 5beba4c..8160276 100644
--- a/drivers/net/ucc_geth.h
+++ b/drivers/net/ucc_geth.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) Freescale Semicondutor, Inc. 2006-2009. All rights reserved.
+ * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
*
* Author: Shlomi Gridish <gridish@freescale.com>
*
@@ -193,31 +193,6 @@ struct ucc_geth {
#define ENET_TBI_MII_JD 0x10 /* Jitter diagnostics */
#define ENET_TBI_MII_TBICON 0x11 /* TBI control */
-/* TBI MDIO register bit fields*/
-#define TBISR_LSTATUS 0x0004
-#define TBICON_CLK_SELECT 0x0020
-#define TBIANA_ASYMMETRIC_PAUSE 0x0100
-#define TBIANA_SYMMETRIC_PAUSE 0x0080
-#define TBIANA_HALF_DUPLEX 0x0040
-#define TBIANA_FULL_DUPLEX 0x0020
-#define TBICR_PHY_RESET 0x8000
-#define TBICR_ANEG_ENABLE 0x1000
-#define TBICR_RESTART_ANEG 0x0200
-#define TBICR_FULL_DUPLEX 0x0100
-#define TBICR_SPEED1_SET 0x0040
-
-#define TBIANA_SETTINGS ( \
- TBIANA_ASYMMETRIC_PAUSE \
- | TBIANA_SYMMETRIC_PAUSE \
- | TBIANA_FULL_DUPLEX \
- )
-#define TBICR_SETTINGS ( \
- TBICR_PHY_RESET \
- | TBICR_ANEG_ENABLE \
- | TBICR_FULL_DUPLEX \
- | TBICR_SPEED1_SET \
- )
-
/* UCC GETH MACCFG1 (MAC Configuration 1 Register) */
#define MACCFG1_FLOW_RX 0x00000020 /* Flow Control
Rx */
@@ -1213,7 +1188,6 @@ struct ucc_geth_private {
struct ugeth_mii_info *mii_info;
struct phy_device *phydev;
- struct phy_device *tbiphy;
phy_interface_t phy_interface;
int max_speed;
uint32_t msg_enable;
^ permalink raw reply related
* [PATCH 0/2] Revert and reimplement Add SGMII support to UCC GETH
From: Grant Likely @ 2009-06-17 21:09 UTC (permalink / raw)
To: Stephen Rothwell, subrata, netdev
Cc: Sachin P Sant, linux-kernel, Linuxppc-dev, Linux-Next,
Nathan Lynch, Haiying Wang, Li Yang, David S. Miller,
Balbir Singh
Here is a fix for the build failure discovered during the 2.6.31 merge
window on ucc_geth.c. I decided to revert and reapply a fixed version
of the patch to make the new version easier to review and bisect if I
got the fixup wrong. I've compile tested both patches, but I do not have
hardware to run test.
Haiying, please confirm that I haven't horribly trashed your hard work
with my changes.
For anyone interested, I've also pushed these patches out to the -next-net
branch of my git tree:
The following changes since commit 65795efbd380a832ae508b04dba8f8e53f0b84d9:
Linus Torvalds (1):
Merge branch 'next-i2c' of git://aeryn.fluff.org.uk/bjdooks/linux
are available in the git repository at:
git://git.secretlab.ca/git/linux-2.6 next-net
Grant Likely (1):
Revert "net/ucc_geth: Add SGMII support for UEC GETH driver"
Haiying Wang (1):
net/ucc_geth: Add SGMII support for UCC GETH driver
drivers/net/ucc_geth.c | 113 +++++++++++++++++++----------------------------
drivers/net/ucc_geth.h | 2 +-
2 files changed, 47 insertions(+), 68 deletions(-)
--
Grant Likely, B.Sc. P.Eng.
Secret Lab Technologies Ltd.
^ permalink raw reply
* [PATCH 1/2] Revert "net/ucc_geth: Add SGMII support for UEC GETH driver"
From: Grant Likely @ 2009-06-17 21:02 UTC (permalink / raw)
To: Stephen Rothwell, subrata, netdev
Cc: Sachin P Sant, linux-kernel, Linuxppc-dev, Linux-Next,
Nathan Lynch, Haiying Wang, Li Yang, David S. Miller,
Balbir Singh
From: Grant Likely <grant.likely@secretlab.ca>
This reverts commit 047584ce94108012288554a5f84585d792cc7f8f.
This patch meshes badly with "net: Rework ucc_geth driver to use
of_mdio infrastructure" (0b9da337dca972e7a4144e298ec3adb8f244d4a4).
Since most of the patch needs to be reworked, it is clearer to revert
the patch and then apply the corrected version
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
arch/powerpc/include/asm/qe.h | 2 -
drivers/net/ucc_geth.c | 79 +----------------------------------------
drivers/net/ucc_geth.h | 28 +--------------
3 files changed, 2 insertions(+), 107 deletions(-)
diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h
index 157c5ca..e0faf33 100644
--- a/arch/powerpc/include/asm/qe.h
+++ b/arch/powerpc/include/asm/qe.h
@@ -675,8 +675,6 @@ struct ucc_slow_pram {
#define UCC_GETH_UPSMR_RMM 0x00001000
#define UCC_GETH_UPSMR_CAM 0x00000400
#define UCC_GETH_UPSMR_BRO 0x00000200
-#define UCC_GETH_UPSMR_SMM 0x00000080
-#define UCC_GETH_UPSMR_SGMM 0x00000020
/* UCC Transmit On Demand Register (UTODR) */
#define UCC_SLOW_TOD 0x8000
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index e2f2e91..5118993 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2006-2009 Freescale Semicondutor, Inc. All rights reserved.
+ * Copyright (C) 2006-2007 Freescale Semicondutor, Inc. All rights reserved.
*
* Author: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
@@ -65,8 +65,6 @@
static DEFINE_SPINLOCK(ugeth_lock);
-static void uec_configure_serdes(struct net_device *dev);
-
static struct {
u32 msg_enable;
} debug = { -1 };
@@ -1412,9 +1410,6 @@ static int adjust_enet_interface(struct ucc_geth_private *ugeth)
(ugeth->phy_interface == PHY_INTERFACE_MODE_RTBI)) {
upsmr |= UCC_GETH_UPSMR_TBIM;
}
- if ((ugeth->phy_interface == PHY_INTERFACE_MODE_SGMII))
- upsmr |= UCC_GETH_UPSMR_SGMM;
-
out_be32(&uf_regs->upsmr, upsmr);
/* Disable autonegotiation in tbi mode, because by default it
@@ -1559,9 +1554,6 @@ static int init_phy(struct net_device *dev)
return -ENODEV;
}
- if (priv->phy_interface == PHY_INTERFACE_MODE_SGMII)
- uec_configure_serdes(dev);
-
phydev->supported &= (ADVERTISED_10baseT_Half |
ADVERTISED_10baseT_Full |
ADVERTISED_100baseT_Half |
@@ -1577,41 +1569,7 @@ static int init_phy(struct net_device *dev)
return 0;
}
-/* Initialize TBI PHY interface for communicating with the
- * SERDES lynx PHY on the chip. We communicate with this PHY
- * through the MDIO bus on each controller, treating it as a
- * "normal" PHY at the address found in the UTBIPA register. We assume
- * that the UTBIPA register is valid. Either the MDIO bus code will set
- * it to a value that doesn't conflict with other PHYs on the bus, or the
- * value doesn't matter, as there are no other PHYs on the bus.
- */
-static void uec_configure_serdes(struct net_device *dev)
-{
- struct ucc_geth_private *ugeth = netdev_priv(dev);
-
- if (!ugeth->tbiphy) {
- printk(KERN_WARNING "SGMII mode requires that the device "
- "tree specify a tbi-handle\n");
- return;
- }
-
- /*
- * If the link is already up, we must already be ok, and don't need to
- * configure and reset the TBI<->SerDes link. Maybe U-Boot configured
- * everything for us? Resetting it takes the link down and requires
- * several seconds for it to come back.
- */
- if (phy_read(ugeth->tbiphy, ENET_TBI_MII_SR) & TBISR_LSTATUS)
- return;
-
- /* Single clk mode, mii mode off(for serdes communication) */
- phy_write(ugeth->tbiphy, ENET_TBI_MII_ANA, TBIANA_SETTINGS);
- phy_write(ugeth->tbiphy, ENET_TBI_MII_TBICON, TBICON_CLK_SELECT);
-
- phy_write(ugeth->tbiphy, ENET_TBI_MII_CR, TBICR_SETTINGS);
-
-}
static int ugeth_graceful_stop_tx(struct ucc_geth_private *ugeth)
{
@@ -3573,8 +3531,6 @@ static phy_interface_t to_phy_interface(const char *phy_connection_type)
return PHY_INTERFACE_MODE_RGMII_RXID;
if (strcasecmp(phy_connection_type, "rtbi") == 0)
return PHY_INTERFACE_MODE_RTBI;
- if (strcasecmp(phy_connection_type, "sgmii") == 0)
- return PHY_INTERFACE_MODE_SGMII;
return PHY_INTERFACE_MODE_MII;
}
@@ -3619,7 +3575,6 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
PHY_INTERFACE_MODE_RMII, PHY_INTERFACE_MODE_RGMII,
PHY_INTERFACE_MODE_GMII, PHY_INTERFACE_MODE_RGMII,
PHY_INTERFACE_MODE_TBI, PHY_INTERFACE_MODE_RTBI,
- PHY_INTERFACE_MODE_SGMII,
};
ugeth_vdbg("%s: IN", __func__);
@@ -3735,7 +3690,6 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
case PHY_INTERFACE_MODE_RGMII_TXID:
case PHY_INTERFACE_MODE_TBI:
case PHY_INTERFACE_MODE_RTBI:
- case PHY_INTERFACE_MODE_SGMII:
max_speed = SPEED_1000;
break;
default:
@@ -3818,37 +3772,6 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
ugeth->ndev = dev;
ugeth->node = np;
- /* Find the TBI PHY. If it's not there, we don't support SGMII */
- ph = of_get_property(np, "tbi-handle", NULL);
- if (ph) {
- struct device_node *tbi = of_find_node_by_phandle(*ph);
- struct of_device *ofdev;
- struct mii_bus *bus;
- const unsigned int *id;
-
- if (!tbi)
- return 0;
-
- mdio = of_get_parent(tbi);
- if (!mdio)
- return 0;
-
- ofdev = of_find_device_by_node(mdio);
-
- of_node_put(mdio);
-
- id = of_get_property(tbi, "reg", NULL);
- if (!id)
- return 0;
- of_node_put(tbi);
-
- bus = dev_get_drvdata(&ofdev->dev);
- if (!bus)
- return 0;
-
- ugeth->tbiphy = bus->phy_map[*id];
- }
-
return 0;
}
diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h
index 5beba4c..8160276 100644
--- a/drivers/net/ucc_geth.h
+++ b/drivers/net/ucc_geth.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) Freescale Semicondutor, Inc. 2006-2009. All rights reserved.
+ * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
*
* Author: Shlomi Gridish <gridish@freescale.com>
*
@@ -193,31 +193,6 @@ struct ucc_geth {
#define ENET_TBI_MII_JD 0x10 /* Jitter diagnostics */
#define ENET_TBI_MII_TBICON 0x11 /* TBI control */
-/* TBI MDIO register bit fields*/
-#define TBISR_LSTATUS 0x0004
-#define TBICON_CLK_SELECT 0x0020
-#define TBIANA_ASYMMETRIC_PAUSE 0x0100
-#define TBIANA_SYMMETRIC_PAUSE 0x0080
-#define TBIANA_HALF_DUPLEX 0x0040
-#define TBIANA_FULL_DUPLEX 0x0020
-#define TBICR_PHY_RESET 0x8000
-#define TBICR_ANEG_ENABLE 0x1000
-#define TBICR_RESTART_ANEG 0x0200
-#define TBICR_FULL_DUPLEX 0x0100
-#define TBICR_SPEED1_SET 0x0040
-
-#define TBIANA_SETTINGS ( \
- TBIANA_ASYMMETRIC_PAUSE \
- | TBIANA_SYMMETRIC_PAUSE \
- | TBIANA_FULL_DUPLEX \
- )
-#define TBICR_SETTINGS ( \
- TBICR_PHY_RESET \
- | TBICR_ANEG_ENABLE \
- | TBICR_FULL_DUPLEX \
- | TBICR_SPEED1_SET \
- )
-
/* UCC GETH MACCFG1 (MAC Configuration 1 Register) */
#define MACCFG1_FLOW_RX 0x00000020 /* Flow Control
Rx */
@@ -1213,7 +1188,6 @@ struct ucc_geth_private {
struct ugeth_mii_info *mii_info;
struct phy_device *phydev;
- struct phy_device *tbiphy;
phy_interface_t phy_interface;
int max_speed;
uint32_t msg_enable;
^ permalink raw reply related
* Re: [PATCH v2] sdhci: Add support for hosts that are only capable of 1-bit transfers
From: Grant Likely @ 2009-06-17 20:55 UTC (permalink / raw)
To: Anton Vorontsov
Cc: linuxppc-dev, Pierre Ossman, devicetree-discuss, sdhci-devel
In-Reply-To: <20090617201408.GA17909@oksana.dev.rtsoft.ru>
On Wed, Jun 17, 2009 at 2:14 PM, Anton
Vorontsov<avorontsov@ru.mvista.com> wrote:
> Some hosts (hardware configurations, or particular SD/MMC slots) may
> not support 4-bit bus. For example, on MPC8569E-MDS boards we can
> switch between serial (1-bit only) and nibble (4-bit) modes, thought
> we have to disable more peripherals to work in 4-bit mode.
>
> Along with some small core changes, this patch modifies sdhci-of
> driver, so that now it looks for "sdhci,1-bit-only" property in the
> device-tree, and if specified we enable a proper quirk.
>
> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Looks good to me.
Acked-by: Grant Likely <grant.likely@secretlab.ca>
g.
> ---
>
> Pierre,
>
> As promised, here is a version with a quirk.
> Also incorporated suggestions by Grant Likely.
>
>
> Thanks,
>
> =A0Documentation/powerpc/dts-bindings/fsl/esdhc.txt | =A0 =A02 ++
> =A0drivers/mmc/host/sdhci-of.c =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =
=A0| =A0 =A03 +++
> =A0drivers/mmc/host/sdhci.c =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =
=A0 | =A0 =A05 ++++-
> =A0drivers/mmc/host/sdhci.h =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =
=A0 | =A0 =A02 ++
> =A04 files changed, 11 insertions(+), 1 deletions(-)
>
> diff --git a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt b/Documenta=
tion/powerpc/dts-bindings/fsl/esdhc.txt
> index 5093ddf..3ed3797 100644
> --- a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
> +++ b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
> @@ -10,6 +10,8 @@ Required properties:
> =A0 - interrupts : should contain eSDHC interrupt.
> =A0 - interrupt-parent : interrupt source phandle.
> =A0 - clock-frequency : specifies eSDHC base clock frequency.
> + =A0- sdhci,1-bit-only : (optional) specifies that a controller can
> + =A0 =A0only handle 1-bit data transfers.
>
> =A0Example:
>
> diff --git a/drivers/mmc/host/sdhci-of.c b/drivers/mmc/host/sdhci-of.c
> index 09cc597..dd65f84 100644
> --- a/drivers/mmc/host/sdhci-of.c
> +++ b/drivers/mmc/host/sdhci-of.c
> @@ -244,6 +244,9 @@ static int __devinit sdhci_of_probe(struct of_device =
*ofdev,
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0host->ops =3D &sdhci_of_data->ops;
> =A0 =A0 =A0 =A0}
>
> + =A0 =A0 =A0 if (of_get_property(np, "sdhci,1-bit-only", NULL))
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 host->quirks |=3D SDHCI_QUIRK_FORCE_1_BIT_D=
ATA;
> +
> =A0 =A0 =A0 =A0clk =3D of_get_property(np, "clock-frequency", &size);
> =A0 =A0 =A0 =A0if (clk && size =3D=3D sizeof(*clk) && *clk)
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0of_host->clock =3D *clk;
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index 9234be2..f28f94a 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -1721,7 +1721,10 @@ int sdhci_add_host(struct sdhci_host *host)
> =A0 =A0 =A0 =A0mmc->ops =3D &sdhci_ops;
> =A0 =A0 =A0 =A0mmc->f_min =3D host->max_clk / 256;
> =A0 =A0 =A0 =A0mmc->f_max =3D host->max_clk;
> - =A0 =A0 =A0 mmc->caps =3D MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
> + =A0 =A0 =A0 mmc->caps =3D MMC_CAP_SDIO_IRQ;
> +
> + =A0 =A0 =A0 if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA))
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 mmc->caps |=3D MMC_CAP_4_BIT_DATA;
>
> =A0 =A0 =A0 =A0if (caps & SDHCI_CAN_DO_HISPD)
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0mmc->caps |=3D MMC_CAP_SD_HIGHSPEED;
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index 65c6f99..834f877 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -226,6 +226,8 @@ struct sdhci_host {
> =A0#define SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET =A0 =A0 =A0 =A0 =A0 (1<<1=
9)
> =A0/* Controller has to be forced to use block size of 2048 bytes */
> =A0#define SDHCI_QUIRK_FORCE_BLK_SZ_2048 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =
=A0(1<<20)
> +/* Controller can only handle 1-bit data transfers */
> +#define SDHCI_QUIRK_FORCE_1_BIT_DATA =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0=
(1<<21)
>
> =A0 =A0 =A0 =A0int =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 irq; =A0 =A0 =
=A0 =A0 =A0 =A0/* Device IRQ */
> =A0 =A0 =A0 =A0void __iomem * =A0 =A0 =A0 =A0 =A0ioaddr; =A0 =A0 =A0 =A0 =
/* Mapped address */
> --
> 1.6.3.1
>
--=20
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
^ permalink raw reply
* Re: [PATCH][Resend 2][BUILD FAILURE 04/04] Next June 04:PPC64 randconfig [drivers/net/ucc_geth.o]
From: Grant Likely @ 2009-06-17 20:37 UTC (permalink / raw)
To: Stephen Rothwell
Cc: Sachin P Sant, netdev, Linux-Kernel, Linuxppc-dev, Linux-Next,
Nathan Lynch, Haiying Wang, Li Yang, subrata, David S. Miller,
Balbir Singh
In-Reply-To: <fa686aa40906171029p4d5b876fm16d0f144b1a19346@mail.gmail.com>
On Wed, Jun 17, 2009 at 11:29 AM, Grant Likely<grant.likely@secretlab.ca> w=
rote:
> On Wed, Jun 17, 2009 at 7:34 AM, Stephen Rothwell<sfr@canb.auug.org.au> w=
rote:
>> On Wed, 17 Jun 2009 23:23:41 +1000 Stephen Rothwell <sfr@canb.auug.org.a=
u> wrote:
>>>
>>> Hi Kumar,
>>>
>>> On Wed, 17 Jun 2009 08:07:47 -0500 Kumar Gala <galak@kernel.crashing.or=
g> wrote:
>>> >
>>> >
>>> > I'm confused by the proposed fix as we already have *mdio & *ph
>>> > defined in this function:
>>>
>>> Which tree are you looking at? =A0Linus' tree, and linux-next, do not h=
ave
>>> those local variables ...
>>
>> Hmmm, commit 0b9da337dca972e7a4144e298ec3adb8f244d4a4 ("net: Rework
>> ucc_geth driver to use of_mdio infrastructure") removed the locals along
>> with their usages, then commit 047584ce94108012288554a5f84585d792cc7f8f
>> ("net/ucc_geth: Add SGMII support for UEC GETH driver") added more uses
>> without adding the variables back.
>>
>> Here is the patch again:
>>
>> From: Subrata Modak <subrata@linux.vnet.ibm.com>
>> Subject: [PATCH] Fix build error in ucc_geth.c
>>
>> Fix the following build error:
>>
>> drivers/net/ucc_geth.c: In function bucc_geth_probeb:
>> drivers/net/ucc_geth.c:3822: error: 'ph' undeclared (first use in this f=
unction)
>> drivers/net/ucc_geth.c:3822: error: (Each undeclared identifier is repor=
ted only once
>> drivers/net/ucc_geth.c:3822: error: for each function it appears in.)
>> drivers/net/ucc_geth.c:3832: error: 'mdio' undeclared (first use in this=
function)
>> make[2]: *** [drivers/net/ucc_geth.o] Error 1
>>
>> Signed-off-by: Subrata Modak <subrata@linux.vnet.ibm.com>
>>
>> --- linux-2.6.30-rc8/drivers/net/ucc_geth.c.orig =A0 =A0 =A0 =A02009-06-=
10 11:58:39.000000000 -0500
>> +++ linux-2.6.30-rc8/drivers/net/ucc_geth.c =A0 =A0 2009-06-10 22:28:13.=
000000000 -0500
>> @@ -3595,6 +3595,8 @@ static const struct net_device_ops ucc_g
>>
>> =A0static int ucc_geth_probe(struct of_device* ofdev, const struct of_de=
vice_id *match)
>> =A0{
>> + =A0 =A0 =A0 struct device_node *mdio;
>> + =A0 =A0 =A0 const phandle *ph;
>> =A0 =A0 =A0 =A0struct device *device =3D &ofdev->dev;
>> =A0 =A0 =A0 =A0struct device_node *np =3D ofdev->node;
>> =A0 =A0 =A0 =A0struct net_device *dev =3D NULL;
>
> Ah, this might not be the right fix then. =A0I'll look.
Yeah, this is not the right fix. The SGMII change doesn't mesh well
with the of_mdio changes and needed some rewriting. I'm about to post
a patch (compile tested only) which should make things happy.
--=20
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
^ permalink raw reply
* [PATCH v2] sdhci: Add support for hosts that are only capable of 1-bit transfers
From: Anton Vorontsov @ 2009-06-17 20:14 UTC (permalink / raw)
To: Pierre Ossman; +Cc: linuxppc-dev, devicetree-discuss, sdhci-devel
In-Reply-To: <20090611201545.GA15942@oksana.dev.rtsoft.ru>
Some hosts (hardware configurations, or particular SD/MMC slots) may
not support 4-bit bus. For example, on MPC8569E-MDS boards we can
switch between serial (1-bit only) and nibble (4-bit) modes, thought
we have to disable more peripherals to work in 4-bit mode.
Along with some small core changes, this patch modifies sdhci-of
driver, so that now it looks for "sdhci,1-bit-only" property in the
device-tree, and if specified we enable a proper quirk.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
Pierre,
As promised, here is a version with a quirk.
Also incorporated suggestions by Grant Likely.
Thanks,
Documentation/powerpc/dts-bindings/fsl/esdhc.txt | 2 ++
drivers/mmc/host/sdhci-of.c | 3 +++
drivers/mmc/host/sdhci.c | 5 ++++-
drivers/mmc/host/sdhci.h | 2 ++
4 files changed, 11 insertions(+), 1 deletions(-)
diff --git a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
index 5093ddf..3ed3797 100644
--- a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
@@ -10,6 +10,8 @@ Required properties:
- interrupts : should contain eSDHC interrupt.
- interrupt-parent : interrupt source phandle.
- clock-frequency : specifies eSDHC base clock frequency.
+ - sdhci,1-bit-only : (optional) specifies that a controller can
+ only handle 1-bit data transfers.
Example:
diff --git a/drivers/mmc/host/sdhci-of.c b/drivers/mmc/host/sdhci-of.c
index 09cc597..dd65f84 100644
--- a/drivers/mmc/host/sdhci-of.c
+++ b/drivers/mmc/host/sdhci-of.c
@@ -244,6 +244,9 @@ static int __devinit sdhci_of_probe(struct of_device *ofdev,
host->ops = &sdhci_of_data->ops;
}
+ if (of_get_property(np, "sdhci,1-bit-only", NULL))
+ host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA;
+
clk = of_get_property(np, "clock-frequency", &size);
if (clk && size == sizeof(*clk) && *clk)
of_host->clock = *clk;
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 9234be2..f28f94a 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1721,7 +1721,10 @@ int sdhci_add_host(struct sdhci_host *host)
mmc->ops = &sdhci_ops;
mmc->f_min = host->max_clk / 256;
mmc->f_max = host->max_clk;
- mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
+ mmc->caps = MMC_CAP_SDIO_IRQ;
+
+ if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA))
+ mmc->caps |= MMC_CAP_4_BIT_DATA;
if (caps & SDHCI_CAN_DO_HISPD)
mmc->caps |= MMC_CAP_SD_HIGHSPEED;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 65c6f99..834f877 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -226,6 +226,8 @@ struct sdhci_host {
#define SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET (1<<19)
/* Controller has to be forced to use block size of 2048 bytes */
#define SDHCI_QUIRK_FORCE_BLK_SZ_2048 (1<<20)
+/* Controller can only handle 1-bit data transfers */
+#define SDHCI_QUIRK_FORCE_1_BIT_DATA (1<<21)
int irq; /* Device IRQ */
void __iomem * ioaddr; /* Mapped address */
--
1.6.3.1
^ permalink raw reply related
* Re: [PATCH] sdhci: Add support for hosts that are only capable of 1-bit transfers
From: Anton Vorontsov @ 2009-06-17 20:13 UTC (permalink / raw)
To: Grant Likely; +Cc: linuxppc-dev, Pierre Ossman, devicetree-discuss, sdhci-devel
In-Reply-To: <fa686aa40906130840lfb751a7xc9e24646c860a76d@mail.gmail.com>
On Sat, Jun 13, 2009 at 09:40:02AM -0600, Grant Likely wrote:
> On Thu, Jun 11, 2009 at 2:15 PM, Anton
> Vorontsov<avorontsov@ru.mvista.com> wrote:
> > Some hosts (hardware configurations, or particular SD/MMC slots) may
> > not support 4-bit bus. For example, on MPC8569E-MDS boards we can
> > switch between serial (1-bit only) and nibble (4-bit) modes, thought
> > we have to disable more peripherals to work in 4-bit mode.
> >
> > Along with some small core changes, this patch modifies sdhci-of
> > driver, so that now it looks for "mode" property in the device-tree.
> >
> > Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
> > ---
> >
> > Pierre, I'm not sure if a quirk would be appropriate here. If so,
> > I can redo the patch with FORCE_1_BIT_DATA quirk.
> >
> > Thanks,
> >
> > Documentation/powerpc/dts-bindings/fsl/esdhc.txt | 2 ++
> > drivers/mmc/host/sdhci-of.c | 7 +++++++
> > drivers/mmc/host/sdhci-pci.c | 1 +
> > drivers/mmc/host/sdhci.c | 2 +-
> > 4 files changed, 11 insertions(+), 1 deletions(-)
> >
> > diff --git a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
> > index 5093ddf..298b865 100644
> > --- a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
> > +++ b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
> > @@ -10,6 +10,8 @@ Required properties:
> > - interrupts : should contain eSDHC interrupt.
> > - interrupt-parent : interrupt source phandle.
> > - clock-frequency : specifies eSDHC base clock frequency.
> > + - mode : specifies eSDHC mode, valid values are: "1-bit" and "4-bit".
> > + If mode is unspecified, then 4-bit mode is assumed.
>
> In light of Pierre's comment that 4-bit is mandatory and this is a
> deviation, perhaps it would be better to define an empty property to
> indicate that only 1-bit transfers work. Maybe something along the
> lines of "sdhc-1-bit-only"?
Yeah, since it turned up to be a quirk, we'd better use a named
property.
(I think that by convention we should use commas for
controller-specific properties, i.e. "sdhci,property".)
Thanks!
--
Anton Vorontsov
email: cbouatmailru@gmail.com
irc://irc.freenode.net/bd2
^ permalink raw reply
* Re: [BUILD FAILURE 02/04] Next June 04:PPC64 randconfig [drivers/usb/host/ohci-hcd.o]
From: Grant Likely @ 2009-06-17 20:06 UTC (permalink / raw)
To: subrata
Cc: Sachin P Sant, Randy Dunlap, Arnd Bergmann, Stephen Rothwell,
linux-usb, Linux-Kernel, David Brownell, Linuxppc-dev, Linux-Next,
kernel
In-Reply-To: <fa686aa40906171115m3e3faab2r63814ea8013056d0@mail.gmail.com>
On Wed, Jun 17, 2009 at 12:15 PM, Grant Likely<grant.likely@secretlab.ca> w=
rote:
> On Wed, Jun 17, 2009 at 6:53 AM, Subrata
> Modak<subrata@linux.vnet.ibm.com> wrote:
>> On Mon, 2009-06-15 at 12:21 +0530, Subrata Modak wrote:
>>> On Fri, 2009-06-12 at 15:05 +0530, Subrata Modak wrote:
>>> > On Tue, 2009-06-09 at 17:38 -0700, David Brownell wrote:
>>> > > On Friday 05 June 2009, Subrata Modak wrote:
>>> > > > Correct, it fixes the issue. However, since few changes might hav=
e gone
>>> > > > to the Kconfig, the patch does not apply cleanly. Below is the pa=
tch, just
>>> > > > a retake of the earlier one, but on the latest code.
>>> > >
>>> > > And it got mangled a bit along the way. =A0Plus, the original one
>>> > > goofed up Kconfig dependency displays ... both issues fixed in
>>> > > this version, against current mainline GIT.
>>> > >
>>> > > If someone can verify all four PPC/OF/OHCI configs build on
>>> > > on PPC64, I'm OK with it.
>>> > >
>>> > > - Dave
>>> >
>>> > Dave,
>>> >
>>> > Sorry for being late. The patch fixes the issue on the latest git for
>>> > PPC64. Infact, the whole drivers/usb/host/ builds just fine:
>>> >
>>> > linux-2.6 # make drivers/usb/host/
>>> > =A0 CHK =A0 =A0 include/linux/version.h
>>> > =A0 CHK =A0 =A0 include/linux/utsrelease.h
>>> > =A0 SYMLINK include/asm -> include/asm-powerpc
>>> > =A0 CALL =A0 =A0scripts/checksyscalls.sh
>>> > =A0 CC =A0 =A0 =A0drivers/usb/host/ohci-hcd.o
>>> > =A0 CC =A0 =A0 =A0drivers/usb/host/pci-quirks.o
>>> > =A0 CC =A0 =A0 =A0drivers/usb/host/uhci-hcd.o
>>> > =A0 LD =A0 =A0 =A0drivers/usb/host/built-in.o
>>> > =A0 CC [M] =A0drivers/usb/host/isp116x-hcd.o
>>> > =A0 CC [M] =A0drivers/usb/host/u132-hcd.o
>>> >
>>> > You can check in the patch now.
>>>
>>> Dave,
>>>
>>> Have you checked in this patch ? Or, does it require some more
>>> modification/updates from somebody=B4s side ?
>>>
>>
>> Dave,
>>
>> Would you consider checking in this patch ?
>
> Hold off please; give me a couple of hours to investigate.
Never mind; I replied to the wrong email. Please ignore my comments.
g.
--=20
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox