* [PATCH 1/2] powerpc/p1010rdb:add P1010RDB-PB platform support
From: Zhao Qiang @ 2013-10-14 6:46 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Zhao Qiang, R61911
The P1010RDB-PB is similar to P1010RDB(P1010RDB-PA).
So, P1010RDB-PB use the same platform file as P1010RDB.
Then Add support for P1010RDB-PB platform.
Signed-off-by: Zhao Qiang <B45475@freescale.com>
---
arch/powerpc/platforms/85xx/p1010rdb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/powerpc/platforms/85xx/p1010rdb.c b/arch/powerpc/platforms/85xx/p1010rdb.c
index 0252961..d6a3dd3 100644
--- a/arch/powerpc/platforms/85xx/p1010rdb.c
+++ b/arch/powerpc/platforms/85xx/p1010rdb.c
@@ -66,6 +66,8 @@ static int __init p1010_rdb_probe(void)
if (of_flat_dt_is_compatible(root, "fsl,P1010RDB"))
return 1;
+ if (of_flat_dt_is_compatible(root, "fsl,P1010RDB-PB"))
+ return 1;
return 0;
}
--
1.8.0
^ permalink raw reply related
* [PATCH v4 2/2] powerpc/p1010rdb:update dts to adapt to both old and new p1010rdb
From: Zhao Qiang @ 2013-10-14 6:46 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Zhao Qiang, R61911, Shengzhou Liu
In-Reply-To: <1381733174-17384-1-git-send-email-B45475@freescale.com>
P1010rdb-pa and p1010rdb-pb have different phy interrupts.
So update dts to adapt to both p1010rdb-pa and p1010rdb-pb.
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Zhao Qiang <B45475@freescale.com>
---
Changes for v2
- Take p1010rdb_36b.dts into account
Changes for v3
- Do sharing
- add "fsl,P1010RDB-PB"
Changes for v4
- remove "fsl,P1010RDB"
arch/powerpc/boot/dts/p1010rdb-pa.dts | 35 ++++++++++++
.../dts/{p1010rdb_36b.dts => p1010rdb-pa_36b.dts} | 53 ++++-------------
arch/powerpc/boot/dts/p1010rdb-pb.dts | 35 ++++++++++++
.../dts/{p1010rdb_36b.dts => p1010rdb-pb_36b.dts} | 57 +++++--------------
arch/powerpc/boot/dts/p1010rdb.dts | 66 ----------------------
arch/powerpc/boot/dts/p1010rdb.dtsi | 3 -
arch/powerpc/boot/dts/p1010rdb_32b.dtsi | 45 +++++++++++++++
arch/powerpc/boot/dts/p1010rdb_36b.dtsi | 45 +++++++++++++++
8 files changed, 184 insertions(+), 155 deletions(-)
create mode 100644 arch/powerpc/boot/dts/p1010rdb-pa.dts
copy arch/powerpc/boot/dts/{p1010rdb_36b.dts => p1010rdb-pa_36b.dts} (64%)
create mode 100644 arch/powerpc/boot/dts/p1010rdb-pb.dts
rename arch/powerpc/boot/dts/{p1010rdb_36b.dts => p1010rdb-pb_36b.dts} (63%)
delete mode 100644 arch/powerpc/boot/dts/p1010rdb.dts
create mode 100644 arch/powerpc/boot/dts/p1010rdb_32b.dtsi
create mode 100644 arch/powerpc/boot/dts/p1010rdb_36b.dtsi
diff --git a/arch/powerpc/boot/dts/p1010rdb-pa.dts b/arch/powerpc/boot/dts/p1010rdb-pa.dts
new file mode 100644
index 0000000..8a74700
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1010rdb-pa.dts
@@ -0,0 +1,35 @@
+/*
+ * P1010 RDB Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/p1010si-pre.dtsi"
+
+/ {
+ model = "fsl,P1010RDB";
+ compatible = "fsl,P1010RDB";
+
+ /include/ "p1010rdb_32b.dtsi"
+};
+
+/include/ "p1010rdb.dtsi"
+
+&phy0 {
+ interrupts = <3 1 0 0>;
+};
+
+&phy1 {
+ interrupts = <2 1 0 0>;
+};
+
+&phy2 {
+ interrupts = <2 1 0 0>;
+};
+
+/include/ "fsl/p1010si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1010rdb_36b.dts b/arch/powerpc/boot/dts/p1010rdb-pa_36b.dts
similarity index 64%
copy from arch/powerpc/boot/dts/p1010rdb_36b.dts
copy to arch/powerpc/boot/dts/p1010rdb-pa_36b.dts
index 64776f4..2004ee7 100644
--- a/arch/powerpc/boot/dts/p1010rdb_36b.dts
+++ b/arch/powerpc/boot/dts/p1010rdb-pa_36b.dts
@@ -38,52 +38,21 @@
model = "fsl,P1010RDB";
compatible = "fsl,P1010RDB";
- memory {
- device_type = "memory";
- };
-
- board_ifc: ifc: ifc@fffe1e000 {
- /* NOR, NAND Flashes and CPLD on board */
- ranges = <0x0 0x0 0xf 0xee000000 0x02000000
- 0x1 0x0 0xf 0xff800000 0x00010000
- 0x3 0x0 0xf 0xffb00000 0x00000020>;
- reg = <0xf 0xffe1e000 0 0x2000>;
- };
-
- board_soc: soc: soc@fffe00000 {
- ranges = <0x0 0xf 0xffe00000 0x100000>;
- };
+ /include/ "p1010rdb_36b.dtsi"
+};
- pci0: pcie@fffe09000 {
- reg = <0xf 0xffe09000 0 0x1000>;
- ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
- pcie@0 {
- ranges = <0x2000000 0x0 0xc0000000
- 0x2000000 0x0 0xc0000000
- 0x0 0x20000000
+/include/ "p1010rdb.dtsi"
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
+&phy0 {
+ interrupts = <3 1 0 0>;
+};
- pci1: pcie@fffe0a000 {
- reg = <0xf 0xffe0a000 0 0x1000>;
- ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
- pcie@0 {
- ranges = <0x2000000 0x0 0xc0000000
- 0x2000000 0x0 0xc0000000
- 0x0 0x20000000
+&phy1 {
+ interrupts = <2 1 0 0>;
+};
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
+&phy2 {
+ interrupts = <2 1 0 0>;
};
-/include/ "p1010rdb.dtsi"
/include/ "fsl/p1010si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1010rdb-pb.dts b/arch/powerpc/boot/dts/p1010rdb-pb.dts
new file mode 100644
index 0000000..6eeb7d3
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1010rdb-pb.dts
@@ -0,0 +1,35 @@
+/*
+ * P1010 RDB Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/p1010si-pre.dtsi"
+
+/ {
+ model = "fsl,P1010RDB-PB";
+ compatible = "fsl,P1010RDB-PB";
+
+ /include/ "p1010rdb_32b.dtsi"
+};
+
+/include/ "p1010rdb.dtsi"
+
+&phy0 {
+ interrupts = <0 1 0 0>;
+};
+
+&phy1 {
+ interrupts = <2 1 0 0>;
+};
+
+&phy2 {
+ interrupts = <1 1 0 0>;
+};
+
+/include/ "fsl/p1010si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1010rdb_36b.dts b/arch/powerpc/boot/dts/p1010rdb-pb_36b.dts
similarity index 63%
rename from arch/powerpc/boot/dts/p1010rdb_36b.dts
rename to arch/powerpc/boot/dts/p1010rdb-pb_36b.dts
index 64776f4..7ab3c90 100644
--- a/arch/powerpc/boot/dts/p1010rdb_36b.dts
+++ b/arch/powerpc/boot/dts/p1010rdb-pb_36b.dts
@@ -35,55 +35,24 @@
/include/ "fsl/p1010si-pre.dtsi"
/ {
- model = "fsl,P1010RDB";
- compatible = "fsl,P1010RDB";
+ model = "fsl,P1010RDB-PB";
+ compatible = "fsl,P1010RDB-PB";
- memory {
- device_type = "memory";
- };
-
- board_ifc: ifc: ifc@fffe1e000 {
- /* NOR, NAND Flashes and CPLD on board */
- ranges = <0x0 0x0 0xf 0xee000000 0x02000000
- 0x1 0x0 0xf 0xff800000 0x00010000
- 0x3 0x0 0xf 0xffb00000 0x00000020>;
- reg = <0xf 0xffe1e000 0 0x2000>;
- };
-
- board_soc: soc: soc@fffe00000 {
- ranges = <0x0 0xf 0xffe00000 0x100000>;
- };
+ /include/ "p1010rdb_36b.dtsi"
+};
- pci0: pcie@fffe09000 {
- reg = <0xf 0xffe09000 0 0x1000>;
- ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
- pcie@0 {
- ranges = <0x2000000 0x0 0xc0000000
- 0x2000000 0x0 0xc0000000
- 0x0 0x20000000
+/include/ "p1010rdb.dtsi"
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
+&phy0 {
+ interrupts = <0 1 0 0>;
+};
- pci1: pcie@fffe0a000 {
- reg = <0xf 0xffe0a000 0 0x1000>;
- ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
- pcie@0 {
- ranges = <0x2000000 0x0 0xc0000000
- 0x2000000 0x0 0xc0000000
- 0x0 0x20000000
+&phy1 {
+ interrupts = <2 1 0 0>;
+};
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
+&phy2 {
+ interrupts = <1 1 0 0>;
};
-/include/ "p1010rdb.dtsi"
/include/ "fsl/p1010si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1010rdb.dts b/arch/powerpc/boot/dts/p1010rdb.dts
deleted file mode 100644
index b868d22..0000000
--- a/arch/powerpc/boot/dts/p1010rdb.dts
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * P1010 RDB Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/include/ "fsl/p1010si-pre.dtsi"
-
-/ {
- model = "fsl,P1010RDB";
- compatible = "fsl,P1010RDB";
-
- memory {
- device_type = "memory";
- };
-
- board_ifc: ifc: ifc@ffe1e000 {
- /* NOR, NAND Flashes and CPLD on board */
- ranges = <0x0 0x0 0x0 0xee000000 0x02000000
- 0x1 0x0 0x0 0xff800000 0x00010000
- 0x3 0x0 0x0 0xffb00000 0x00000020>;
- reg = <0x0 0xffe1e000 0 0x2000>;
- };
-
- board_soc: soc: soc@ffe00000 {
- ranges = <0x0 0x0 0xffe00000 0x100000>;
- };
-
- pci0: pcie@ffe09000 {
- reg = <0 0xffe09000 0 0x1000>;
- ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- pcie@0 {
- ranges = <0x2000000 0x0 0xa0000000
- 0x2000000 0x0 0xa0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-
- pci1: pcie@ffe0a000 {
- reg = <0 0xffe0a000 0 0x1000>;
- ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- pcie@0 {
- ranges = <0x2000000 0x0 0x80000000
- 0x2000000 0x0 0x80000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-};
-
-/include/ "p1010rdb.dtsi"
-/include/ "fsl/p1010si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1010rdb.dtsi b/arch/powerpc/boot/dts/p1010rdb.dtsi
index ec7c27a..4853399 100644
--- a/arch/powerpc/boot/dts/p1010rdb.dtsi
+++ b/arch/powerpc/boot/dts/p1010rdb.dtsi
@@ -193,17 +193,14 @@
mdio@24000 {
phy0: ethernet-phy@0 {
- interrupts = <3 1 0 0>;
reg = <0x1>;
};
phy1: ethernet-phy@1 {
- interrupts = <2 1 0 0>;
reg = <0x0>;
};
phy2: ethernet-phy@2 {
- interrupts = <2 1 0 0>;
reg = <0x2>;
};
diff --git a/arch/powerpc/boot/dts/p1010rdb_32b.dtsi b/arch/powerpc/boot/dts/p1010rdb_32b.dtsi
new file mode 100644
index 0000000..4453e43
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1010rdb_32b.dtsi
@@ -0,0 +1,45 @@
+memory {
+ device_type = "memory";
+};
+
+board_ifc: ifc: ifc@ffe1e000 {
+ /* NOR, NAND Flashes and CPLD on board */
+ ranges = <0x0 0x0 0x0 0xee000000 0x02000000
+ 0x1 0x0 0x0 0xff800000 0x00010000
+ 0x3 0x0 0x0 0xffb00000 0x00000020>;
+ reg = <0x0 0xffe1e000 0 0x2000>;
+};
+
+board_soc: soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+};
+
+pci0: pcie@ffe09000 {
+ reg = <0 0xffe09000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+};
+
+pci1: pcie@ffe0a000 {
+ reg = <0 0xffe0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/p1010rdb_36b.dtsi b/arch/powerpc/boot/dts/p1010rdb_36b.dtsi
new file mode 100644
index 0000000..f8f3888
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1010rdb_36b.dtsi
@@ -0,0 +1,45 @@
+memory {
+ device_type = "memory";
+};
+
+board_ifc: ifc: ifc@fffe1e000 {
+ /* NOR, NAND Flashes and CPLD on board */
+ ranges = <0x0 0x0 0xf 0xee000000 0x02000000
+ 0x1 0x0 0xf 0xff800000 0x00010000
+ 0x3 0x0 0xf 0xffb00000 0x00000020>;
+ reg = <0xf 0xffe1e000 0 0x2000>;
+};
+
+board_soc: soc: soc@fffe00000 {
+ ranges = <0x0 0xf 0xffe00000 0x100000>;
+};
+
+pci0: pcie@fffe09000 {
+ reg = <0xf 0xffe09000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+};
+
+pci1: pcie@fffe0a000 {
+ reg = <0xf 0xffe0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+};
--
1.8.0
^ permalink raw reply related
* [PATCH] powerpc/kexec: kexec_sequence() is in misc_64.S
From: Geert Uytterhoeven @ 2013-10-14 7:40 UTC (permalink / raw)
To: Benjamin Herrenschmidt; +Cc: Geert Uytterhoeven, linuxppc-dev, linux-kernel
Correct reference to the location of the kexec_sequence() assembly helper.
There never was a kexec_stub.S in mainline.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
arch/powerpc/kernel/machine_kexec_64.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c
index 611acdf30096..be4e6d648f60 100644
--- a/arch/powerpc/kernel/machine_kexec_64.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -312,7 +312,7 @@ static union thread_union kexec_stack __init_task_data =
*/
struct paca_struct kexec_paca;
-/* Our assembly helper, in kexec_stub.S */
+/* Our assembly helper, in misc_64.S */
extern void kexec_sequence(void *newstack, unsigned long start,
void *image, void *control,
void (*clear_all)(void)) __noreturn;
--
1.7.9.5
^ permalink raw reply related
* [PATCH] powerpc: Add VMX optimised xor for RAID5
From: Anton Blanchard @ 2013-10-14 10:03 UTC (permalink / raw)
To: Benjamin Herrenschmidt; +Cc: linuxppc-dev, paulus
In-Reply-To: <1381470838.5630.62.camel@pasglop>
Add a VMX optimised xor, used primarily for RAID5. On a POWER7 blade
this is a decent win:
32regs : 17932.800 MB/sec
altivec : 19724.800 MB/sec
The bigger gain is when the same test is run in SMT4 mode, as it
would if there was a lot of work going on:
8regs : 8377.600 MB/sec
altivec : 15801.600 MB/sec
I tested this against an array created without the patch, and also
verified it worked as expected on a little endian kernel.
Signed-off-by: Anton Blanchard <anton@samba.org>
---
Index: le-kernel/arch/powerpc/include/asm/xor.h
===================================================================
--- le-kernel.orig/arch/powerpc/include/asm/xor.h
+++ le-kernel/arch/powerpc/include/asm/xor.h
@@ -1 +1,68 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2012
+ *
+ * Author: Anton Blanchard <anton@au.ibm.com>
+ */
+#ifndef _ASM_POWERPC_XOR_H
+#define _ASM_POWERPC_XOR_H
+
+#ifdef CONFIG_ALTIVEC
+
+#include <asm/cputable.h>
+
+void xor_altivec_2(unsigned long bytes, unsigned long *v1_in,
+ unsigned long *v2_in);
+void xor_altivec_3(unsigned long bytes, unsigned long *v1_in,
+ unsigned long *v2_in, unsigned long *v3_in);
+void xor_altivec_4(unsigned long bytes, unsigned long *v1_in,
+ unsigned long *v2_in, unsigned long *v3_in,
+ unsigned long *v4_in);
+void xor_altivec_5(unsigned long bytes, unsigned long *v1_in,
+ unsigned long *v2_in, unsigned long *v3_in,
+ unsigned long *v4_in, unsigned long *v5_in);
+
+static struct xor_block_template xor_block_altivec = {
+ .name = "altivec",
+ .do_2 = xor_altivec_2,
+ .do_3 = xor_altivec_3,
+ .do_4 = xor_altivec_4,
+ .do_5 = xor_altivec_5,
+};
+
+#define XOR_SPEED_ALTIVEC() \
+ do { \
+ if (cpu_has_feature(CPU_FTR_ALTIVEC)) \
+ xor_speed(&xor_block_altivec); \
+ } while (0)
+#else
+#define XOR_SPEED_ALTIVEC
+#endif
+
+/* Also try the generic routines. */
#include <asm-generic/xor.h>
+
+#undef XOR_TRY_TEMPLATES
+#define XOR_TRY_TEMPLATES \
+do { \
+ xor_speed(&xor_block_8regs); \
+ xor_speed(&xor_block_8regs_p); \
+ xor_speed(&xor_block_32regs); \
+ xor_speed(&xor_block_32regs_p); \
+ XOR_SPEED_ALTIVEC(); \
+} while (0)
+
+#endif /* _ASM_POWERPC_XOR_H */
Index: le-kernel/arch/powerpc/lib/Makefile
===================================================================
--- le-kernel.orig/arch/powerpc/lib/Makefile
+++ le-kernel/arch/powerpc/lib/Makefile
@@ -39,3 +39,6 @@ obj-$(CONFIG_PPC_LIB_RHEAP) += rheap.o
obj-y += code-patching.o
obj-y += feature-fixups.o
obj-$(CONFIG_FTR_FIXUP_SELFTEST) += feature-fixups-test.o
+
+obj-$(CONFIG_ALTIVEC) += xor_vmx.o
+CFLAGS_xor_vmx.o += -maltivec -mabi=altivec
Index: le-kernel/arch/powerpc/lib/xor_vmx.c
===================================================================
--- /dev/null
+++ le-kernel/arch/powerpc/lib/xor_vmx.c
@@ -0,0 +1,177 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2012
+ *
+ * Author: Anton Blanchard <anton@au.ibm.com>
+ */
+#include <altivec.h>
+
+#include <linux/preempt.h>
+#include <linux/export.h>
+#include <linux/sched.h>
+#include <asm/switch_to.h>
+
+typedef vector signed char unative_t;
+
+#define DEFINE(V) \
+ unative_t *V = (unative_t *)V##_in; \
+ unative_t V##_0, V##_1, V##_2, V##_3
+
+#define LOAD(V) \
+ do { \
+ V##_0 = V[0]; \
+ V##_1 = V[1]; \
+ V##_2 = V[2]; \
+ V##_3 = V[3]; \
+ } while (0)
+
+#define STORE(V) \
+ do { \
+ V[0] = V##_0; \
+ V[1] = V##_1; \
+ V[2] = V##_2; \
+ V[3] = V##_3; \
+ } while (0)
+
+#define XOR(V1, V2) \
+ do { \
+ V1##_0 = vec_xor(V1##_0, V2##_0); \
+ V1##_1 = vec_xor(V1##_1, V2##_1); \
+ V1##_2 = vec_xor(V1##_2, V2##_2); \
+ V1##_3 = vec_xor(V1##_3, V2##_3); \
+ } while (0)
+
+void xor_altivec_2(unsigned long bytes, unsigned long *v1_in,
+ unsigned long *v2_in)
+{
+ DEFINE(v1);
+ DEFINE(v2);
+ unsigned long lines = bytes / (sizeof(unative_t)) / 4;
+
+ preempt_disable();
+ enable_kernel_altivec();
+
+ do {
+ LOAD(v1);
+ LOAD(v2);
+ XOR(v1, v2);
+ STORE(v1);
+
+ v1 += 4;
+ v2 += 4;
+ } while (--lines > 0);
+
+ preempt_enable();
+}
+EXPORT_SYMBOL(xor_altivec_2);
+
+void xor_altivec_3(unsigned long bytes, unsigned long *v1_in,
+ unsigned long *v2_in, unsigned long *v3_in)
+{
+ DEFINE(v1);
+ DEFINE(v2);
+ DEFINE(v3);
+ unsigned long lines = bytes / (sizeof(unative_t)) / 4;
+
+ preempt_disable();
+ enable_kernel_altivec();
+
+ do {
+ LOAD(v1);
+ LOAD(v2);
+ LOAD(v3);
+ XOR(v1, v2);
+ XOR(v1, v3);
+ STORE(v1);
+
+ v1 += 4;
+ v2 += 4;
+ v3 += 4;
+ } while (--lines > 0);
+
+ preempt_enable();
+}
+EXPORT_SYMBOL(xor_altivec_3);
+
+void xor_altivec_4(unsigned long bytes, unsigned long *v1_in,
+ unsigned long *v2_in, unsigned long *v3_in,
+ unsigned long *v4_in)
+{
+ DEFINE(v1);
+ DEFINE(v2);
+ DEFINE(v3);
+ DEFINE(v4);
+ unsigned long lines = bytes / (sizeof(unative_t)) / 4;
+
+ preempt_disable();
+ enable_kernel_altivec();
+
+ do {
+ LOAD(v1);
+ LOAD(v2);
+ LOAD(v3);
+ LOAD(v4);
+ XOR(v1, v2);
+ XOR(v3, v4);
+ XOR(v1, v3);
+ STORE(v1);
+
+ v1 += 4;
+ v2 += 4;
+ v3 += 4;
+ v4 += 4;
+ } while (--lines > 0);
+
+ preempt_enable();
+}
+EXPORT_SYMBOL(xor_altivec_4);
+
+void xor_altivec_5(unsigned long bytes, unsigned long *v1_in,
+ unsigned long *v2_in, unsigned long *v3_in,
+ unsigned long *v4_in, unsigned long *v5_in)
+{
+ DEFINE(v1);
+ DEFINE(v2);
+ DEFINE(v3);
+ DEFINE(v4);
+ DEFINE(v5);
+ unsigned long lines = bytes / (sizeof(unative_t)) / 4;
+
+ preempt_disable();
+ enable_kernel_altivec();
+
+ do {
+ LOAD(v1);
+ LOAD(v2);
+ LOAD(v3);
+ LOAD(v4);
+ LOAD(v5);
+ XOR(v1, v2);
+ XOR(v3, v4);
+ XOR(v1, v5);
+ XOR(v1, v3);
+ STORE(v1);
+
+ v1 += 4;
+ v2 += 4;
+ v3 += 4;
+ v4 += 4;
+ v5 += 4;
+ } while (--lines > 0);
+
+ preempt_enable();
+}
+EXPORT_SYMBOL(xor_altivec_5);
^ permalink raw reply
* [PATCH] powerpc/qe_lib: Share the qe_lib for the others architecture
From: Xie Xiaobo @ 2013-10-14 11:37 UTC (permalink / raw)
To: linuxppc-dev, scottwood; +Cc: Xie Xiaobo
The QUICC Engine (QE) is a communications coprocessors on Freescale
embedded processors. The QE had been applied in PowerPC architecture
previously, and it will be applied in ARM architecture too.
So move the qe_lib from arch/powerpc to driver/ firstly.
Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
---
arch/powerpc/Kconfig | 2 -
arch/powerpc/include/asm/immap_qe.h | 491 -----------------
arch/powerpc/include/asm/qe.h | 740 -------------------------
arch/powerpc/include/asm/qe_ic.h | 144 -----
arch/powerpc/include/asm/ucc.h | 64 ---
arch/powerpc/include/asm/ucc_fast.h | 244 --------
arch/powerpc/include/asm/ucc_slow.h | 290 ----------
arch/powerpc/platforms/85xx/mpc85xx_mds.c | 4 +-
arch/powerpc/platforms/85xx/mpc85xx_rdb.c | 4 +-
arch/powerpc/platforms/Kconfig | 19 -
arch/powerpc/sysdev/Makefile | 1 -
arch/powerpc/sysdev/qe_lib/Kconfig | 27 -
arch/powerpc/sysdev/qe_lib/Makefile | 10 -
arch/powerpc/sysdev/qe_lib/gpio.c | 317 -----------
arch/powerpc/sysdev/qe_lib/qe.c | 708 ------------------------
arch/powerpc/sysdev/qe_lib/qe_ic.c | 501 -----------------
arch/powerpc/sysdev/qe_lib/qe_ic.h | 103 ----
arch/powerpc/sysdev/qe_lib/qe_io.c | 218 --------
arch/powerpc/sysdev/qe_lib/ucc.c | 213 -------
arch/powerpc/sysdev/qe_lib/ucc_fast.c | 364 ------------
arch/powerpc/sysdev/qe_lib/ucc_slow.c | 380 -------------
arch/powerpc/sysdev/qe_lib/usb.c | 56 --
drivers/Kconfig | 2 +
drivers/Makefile | 3 +
drivers/net/ethernet/freescale/fsl_pq_mdio.c | 2 +-
drivers/net/ethernet/freescale/ucc_geth.c | 8 +-
drivers/net/ethernet/freescale/ucc_geth.h | 8 +-
drivers/qe/Kconfig | 51 ++
drivers/qe/Makefile | 10 +
drivers/qe/gpio.c | 317 +++++++++++
drivers/qe/qe.c | 708 ++++++++++++++++++++++++
drivers/qe/qe_common.c | 187 +++++++
drivers/qe/qe_ic.c | 501 +++++++++++++++++
drivers/qe/qe_ic.h | 103 ++++
drivers/qe/qe_io.c | 218 ++++++++
drivers/qe/ucc.c | 213 +++++++
drivers/qe/ucc_fast.c | 364 ++++++++++++
drivers/qe/ucc_slow.c | 380 +++++++++++++
drivers/qe/usb.c | 56 ++
drivers/spi/spi-fsl-cpm.c | 2 +-
drivers/tty/serial/ucc_uart.c | 2 +-
include/qe/immap_qe.h | 491 +++++++++++++++++
include/qe/qe.h | 794 +++++++++++++++++++++++++++
include/qe/qe_ic.h | 144 +++++
include/qe/ucc.h | 64 +++
include/qe/ucc_fast.h | 244 ++++++++
include/qe/ucc_slow.h | 290 ++++++++++
47 files changed, 5155 insertions(+), 4907 deletions(-)
delete mode 100644 arch/powerpc/include/asm/immap_qe.h
delete mode 100644 arch/powerpc/include/asm/qe.h
delete mode 100644 arch/powerpc/include/asm/qe_ic.h
delete mode 100644 arch/powerpc/include/asm/ucc.h
delete mode 100644 arch/powerpc/include/asm/ucc_fast.h
delete mode 100644 arch/powerpc/include/asm/ucc_slow.h
delete mode 100644 arch/powerpc/sysdev/qe_lib/Kconfig
delete mode 100644 arch/powerpc/sysdev/qe_lib/Makefile
delete mode 100644 arch/powerpc/sysdev/qe_lib/gpio.c
delete mode 100644 arch/powerpc/sysdev/qe_lib/qe.c
delete mode 100644 arch/powerpc/sysdev/qe_lib/qe_ic.c
delete mode 100644 arch/powerpc/sysdev/qe_lib/qe_ic.h
delete mode 100644 arch/powerpc/sysdev/qe_lib/qe_io.c
delete mode 100644 arch/powerpc/sysdev/qe_lib/ucc.c
delete mode 100644 arch/powerpc/sysdev/qe_lib/ucc_fast.c
delete mode 100644 arch/powerpc/sysdev/qe_lib/ucc_slow.c
delete mode 100644 arch/powerpc/sysdev/qe_lib/usb.c
create mode 100644 drivers/qe/Kconfig
create mode 100644 drivers/qe/Makefile
create mode 100644 drivers/qe/gpio.c
create mode 100644 drivers/qe/qe.c
create mode 100644 drivers/qe/qe_common.c
create mode 100644 drivers/qe/qe_ic.c
create mode 100644 drivers/qe/qe_ic.h
create mode 100644 drivers/qe/qe_io.c
create mode 100644 drivers/qe/ucc.c
create mode 100644 drivers/qe/ucc_fast.c
create mode 100644 drivers/qe/ucc_slow.c
create mode 100644 drivers/qe/usb.c
create mode 100644 include/qe/immap_qe.h
create mode 100644 include/qe/qe.h
create mode 100644 include/qe/qe_ic.h
create mode 100644 include/qe/ucc.h
create mode 100644 include/qe/ucc_fast.h
create mode 100644 include/qe/ucc_slow.h
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 7205989..6b45091 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -1016,8 +1016,6 @@ source "drivers/Kconfig"
source "fs/Kconfig"
-source "arch/powerpc/sysdev/qe_lib/Kconfig"
-
source "lib/Kconfig"
source "arch/powerpc/Kconfig.debug"
diff --git a/arch/powerpc/include/asm/immap_qe.h b/arch/powerpc/include/asm/immap_qe.h
deleted file mode 100644
index bedbff8..0000000
--- a/arch/powerpc/include/asm/immap_qe.h
+++ /dev/null
@@ -1,491 +0,0 @@
-/*
- * QUICC Engine (QE) Internal Memory Map.
- * The Internal Memory Map for devices with QE on them. This
- * is the superset of all QE devices (8360, etc.).
-
- * Copyright (C) 2006. Freescale Semiconductor, Inc. All rights reserved.
- *
- * Authors: Shlomi Gridish <gridish@freescale.com>
- * Li Yang <leoli@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#ifndef _ASM_POWERPC_IMMAP_QE_H
-#define _ASM_POWERPC_IMMAP_QE_H
-#ifdef __KERNEL__
-
-#include <linux/kernel.h>
-#include <asm/io.h>
-
-#define QE_IMMAP_SIZE (1024 * 1024) /* 1MB from 1MB+IMMR */
-
-/* QE I-RAM */
-struct qe_iram {
- __be32 iadd; /* I-RAM Address Register */
- __be32 idata; /* I-RAM Data Register */
- u8 res0[0x04];
- __be32 iready; /* I-RAM Ready Register */
- u8 res1[0x70];
-} __attribute__ ((packed));
-
-/* QE Interrupt Controller */
-struct qe_ic_regs {
- __be32 qicr;
- __be32 qivec;
- __be32 qripnr;
- __be32 qipnr;
- __be32 qipxcc;
- __be32 qipycc;
- __be32 qipwcc;
- __be32 qipzcc;
- __be32 qimr;
- __be32 qrimr;
- __be32 qicnr;
- u8 res0[0x4];
- __be32 qiprta;
- __be32 qiprtb;
- u8 res1[0x4];
- __be32 qricr;
- u8 res2[0x20];
- __be32 qhivec;
- u8 res3[0x1C];
-} __attribute__ ((packed));
-
-/* Communications Processor */
-struct cp_qe {
- __be32 cecr; /* QE command register */
- __be32 ceccr; /* QE controller configuration register */
- __be32 cecdr; /* QE command data register */
- u8 res0[0xA];
- __be16 ceter; /* QE timer event register */
- u8 res1[0x2];
- __be16 cetmr; /* QE timers mask register */
- __be32 cetscr; /* QE time-stamp timer control register */
- __be32 cetsr1; /* QE time-stamp register 1 */
- __be32 cetsr2; /* QE time-stamp register 2 */
- u8 res2[0x8];
- __be32 cevter; /* QE virtual tasks event register */
- __be32 cevtmr; /* QE virtual tasks mask register */
- __be16 cercr; /* QE RAM control register */
- u8 res3[0x2];
- u8 res4[0x24];
- __be16 ceexe1; /* QE external request 1 event register */
- u8 res5[0x2];
- __be16 ceexm1; /* QE external request 1 mask register */
- u8 res6[0x2];
- __be16 ceexe2; /* QE external request 2 event register */
- u8 res7[0x2];
- __be16 ceexm2; /* QE external request 2 mask register */
- u8 res8[0x2];
- __be16 ceexe3; /* QE external request 3 event register */
- u8 res9[0x2];
- __be16 ceexm3; /* QE external request 3 mask register */
- u8 res10[0x2];
- __be16 ceexe4; /* QE external request 4 event register */
- u8 res11[0x2];
- __be16 ceexm4; /* QE external request 4 mask register */
- u8 res12[0x3A];
- __be32 ceurnr; /* QE microcode revision number register */
- u8 res13[0x244];
-} __attribute__ ((packed));
-
-/* QE Multiplexer */
-struct qe_mux {
- __be32 cmxgcr; /* CMX general clock route register */
- __be32 cmxsi1cr_l; /* CMX SI1 clock route low register */
- __be32 cmxsi1cr_h; /* CMX SI1 clock route high register */
- __be32 cmxsi1syr; /* CMX SI1 SYNC route register */
- __be32 cmxucr[4]; /* CMX UCCx clock route registers */
- __be32 cmxupcr; /* CMX UPC clock route register */
- u8 res0[0x1C];
-} __attribute__ ((packed));
-
-/* QE Timers */
-struct qe_timers {
- u8 gtcfr1; /* Timer 1 and Timer 2 global config register*/
- u8 res0[0x3];
- u8 gtcfr2; /* Timer 3 and timer 4 global config register*/
- u8 res1[0xB];
- __be16 gtmdr1; /* Timer 1 mode register */
- __be16 gtmdr2; /* Timer 2 mode register */
- __be16 gtrfr1; /* Timer 1 reference register */
- __be16 gtrfr2; /* Timer 2 reference register */
- __be16 gtcpr1; /* Timer 1 capture register */
- __be16 gtcpr2; /* Timer 2 capture register */
- __be16 gtcnr1; /* Timer 1 counter */
- __be16 gtcnr2; /* Timer 2 counter */
- __be16 gtmdr3; /* Timer 3 mode register */
- __be16 gtmdr4; /* Timer 4 mode register */
- __be16 gtrfr3; /* Timer 3 reference register */
- __be16 gtrfr4; /* Timer 4 reference register */
- __be16 gtcpr3; /* Timer 3 capture register */
- __be16 gtcpr4; /* Timer 4 capture register */
- __be16 gtcnr3; /* Timer 3 counter */
- __be16 gtcnr4; /* Timer 4 counter */
- __be16 gtevr1; /* Timer 1 event register */
- __be16 gtevr2; /* Timer 2 event register */
- __be16 gtevr3; /* Timer 3 event register */
- __be16 gtevr4; /* Timer 4 event register */
- __be16 gtps; /* Timer 1 prescale register */
- u8 res2[0x46];
-} __attribute__ ((packed));
-
-/* BRG */
-struct qe_brg {
- __be32 brgc[16]; /* BRG configuration registers */
- u8 res0[0x40];
-} __attribute__ ((packed));
-
-/* SPI */
-struct spi {
- u8 res0[0x20];
- __be32 spmode; /* SPI mode register */
- u8 res1[0x2];
- u8 spie; /* SPI event register */
- u8 res2[0x1];
- u8 res3[0x2];
- u8 spim; /* SPI mask register */
- u8 res4[0x1];
- u8 res5[0x1];
- u8 spcom; /* SPI command register */
- u8 res6[0x2];
- __be32 spitd; /* SPI transmit data register (cpu mode) */
- __be32 spird; /* SPI receive data register (cpu mode) */
- u8 res7[0x8];
-} __attribute__ ((packed));
-
-/* SI */
-struct si1 {
- __be16 siamr1; /* SI1 TDMA mode register */
- __be16 sibmr1; /* SI1 TDMB mode register */
- __be16 sicmr1; /* SI1 TDMC mode register */
- __be16 sidmr1; /* SI1 TDMD mode register */
- u8 siglmr1_h; /* SI1 global mode register high */
- u8 res0[0x1];
- u8 sicmdr1_h; /* SI1 command register high */
- u8 res2[0x1];
- u8 sistr1_h; /* SI1 status register high */
- u8 res3[0x1];
- __be16 sirsr1_h; /* SI1 RAM shadow address register high */
- u8 sitarc1; /* SI1 RAM counter Tx TDMA */
- u8 sitbrc1; /* SI1 RAM counter Tx TDMB */
- u8 sitcrc1; /* SI1 RAM counter Tx TDMC */
- u8 sitdrc1; /* SI1 RAM counter Tx TDMD */
- u8 sirarc1; /* SI1 RAM counter Rx TDMA */
- u8 sirbrc1; /* SI1 RAM counter Rx TDMB */
- u8 sircrc1; /* SI1 RAM counter Rx TDMC */
- u8 sirdrc1; /* SI1 RAM counter Rx TDMD */
- u8 res4[0x8];
- __be16 siemr1; /* SI1 TDME mode register 16 bits */
- __be16 sifmr1; /* SI1 TDMF mode register 16 bits */
- __be16 sigmr1; /* SI1 TDMG mode register 16 bits */
- __be16 sihmr1; /* SI1 TDMH mode register 16 bits */
- u8 siglmg1_l; /* SI1 global mode register low 8 bits */
- u8 res5[0x1];
- u8 sicmdr1_l; /* SI1 command register low 8 bits */
- u8 res6[0x1];
- u8 sistr1_l; /* SI1 status register low 8 bits */
- u8 res7[0x1];
- __be16 sirsr1_l; /* SI1 RAM shadow address register low 16 bits*/
- u8 siterc1; /* SI1 RAM counter Tx TDME 8 bits */
- u8 sitfrc1; /* SI1 RAM counter Tx TDMF 8 bits */
- u8 sitgrc1; /* SI1 RAM counter Tx TDMG 8 bits */
- u8 sithrc1; /* SI1 RAM counter Tx TDMH 8 bits */
- u8 sirerc1; /* SI1 RAM counter Rx TDME 8 bits */
- u8 sirfrc1; /* SI1 RAM counter Rx TDMF 8 bits */
- u8 sirgrc1; /* SI1 RAM counter Rx TDMG 8 bits */
- u8 sirhrc1; /* SI1 RAM counter Rx TDMH 8 bits */
- u8 res8[0x8];
- __be32 siml1; /* SI1 multiframe limit register */
- u8 siedm1; /* SI1 extended diagnostic mode register */
- u8 res9[0xBB];
-} __attribute__ ((packed));
-
-/* SI Routing Tables */
-struct sir {
- u8 tx[0x400];
- u8 rx[0x400];
- u8 res0[0x800];
-} __attribute__ ((packed));
-
-/* USB Controller */
-struct qe_usb_ctlr {
- u8 usb_usmod;
- u8 usb_usadr;
- u8 usb_uscom;
- u8 res1[1];
- __be16 usb_usep[4];
- u8 res2[4];
- __be16 usb_usber;
- u8 res3[2];
- __be16 usb_usbmr;
- u8 res4[1];
- u8 usb_usbs;
- __be16 usb_ussft;
- u8 res5[2];
- __be16 usb_usfrn;
- u8 res6[0x22];
-} __attribute__ ((packed));
-
-/* MCC */
-struct qe_mcc {
- __be32 mcce; /* MCC event register */
- __be32 mccm; /* MCC mask register */
- __be32 mccf; /* MCC configuration register */
- __be32 merl; /* MCC emergency request level register */
- u8 res0[0xF0];
-} __attribute__ ((packed));
-
-/* QE UCC Slow */
-struct ucc_slow {
- __be32 gumr_l; /* UCCx general mode register (low) */
- __be32 gumr_h; /* UCCx general mode register (high) */
- __be16 upsmr; /* UCCx protocol-specific mode register */
- u8 res0[0x2];
- __be16 utodr; /* UCCx transmit on demand register */
- __be16 udsr; /* UCCx data synchronization register */
- __be16 ucce; /* UCCx event register */
- u8 res1[0x2];
- __be16 uccm; /* UCCx mask register */
- u8 res2[0x1];
- u8 uccs; /* UCCx status register */
- u8 res3[0x24];
- __be16 utpt;
- u8 res4[0x52];
- u8 guemr; /* UCC general extended mode register */
-} __attribute__ ((packed));
-
-/* QE UCC Fast */
-struct ucc_fast {
- __be32 gumr; /* UCCx general mode register */
- __be32 upsmr; /* UCCx protocol-specific mode register */
- __be16 utodr; /* UCCx transmit on demand register */
- u8 res0[0x2];
- __be16 udsr; /* UCCx data synchronization register */
- u8 res1[0x2];
- __be32 ucce; /* UCCx event register */
- __be32 uccm; /* UCCx mask register */
- u8 uccs; /* UCCx status register */
- u8 res2[0x7];
- __be32 urfb; /* UCC receive FIFO base */
- __be16 urfs; /* UCC receive FIFO size */
- u8 res3[0x2];
- __be16 urfet; /* UCC receive FIFO emergency threshold */
- __be16 urfset; /* UCC receive FIFO special emergency
- threshold */
- __be32 utfb; /* UCC transmit FIFO base */
- __be16 utfs; /* UCC transmit FIFO size */
- u8 res4[0x2];
- __be16 utfet; /* UCC transmit FIFO emergency threshold */
- u8 res5[0x2];
- __be16 utftt; /* UCC transmit FIFO transmit threshold */
- u8 res6[0x2];
- __be16 utpt; /* UCC transmit polling timer */
- u8 res7[0x2];
- __be32 urtry; /* UCC retry counter register */
- u8 res8[0x4C];
- u8 guemr; /* UCC general extended mode register */
-} __attribute__ ((packed));
-
-struct ucc {
- union {
- struct ucc_slow slow;
- struct ucc_fast fast;
- u8 res[0x200]; /* UCC blocks are 512 bytes each */
- };
-} __attribute__ ((packed));
-
-/* MultiPHY UTOPIA POS Controllers (UPC) */
-struct upc {
- __be32 upgcr; /* UTOPIA/POS general configuration register */
- __be32 uplpa; /* UTOPIA/POS last PHY address */
- __be32 uphec; /* ATM HEC register */
- __be32 upuc; /* UTOPIA/POS UCC configuration */
- __be32 updc1; /* UTOPIA/POS device 1 configuration */
- __be32 updc2; /* UTOPIA/POS device 2 configuration */
- __be32 updc3; /* UTOPIA/POS device 3 configuration */
- __be32 updc4; /* UTOPIA/POS device 4 configuration */
- __be32 upstpa; /* UTOPIA/POS STPA threshold */
- u8 res0[0xC];
- __be32 updrs1_h; /* UTOPIA/POS device 1 rate select */
- __be32 updrs1_l; /* UTOPIA/POS device 1 rate select */
- __be32 updrs2_h; /* UTOPIA/POS device 2 rate select */
- __be32 updrs2_l; /* UTOPIA/POS device 2 rate select */
- __be32 updrs3_h; /* UTOPIA/POS device 3 rate select */
- __be32 updrs3_l; /* UTOPIA/POS device 3 rate select */
- __be32 updrs4_h; /* UTOPIA/POS device 4 rate select */
- __be32 updrs4_l; /* UTOPIA/POS device 4 rate select */
- __be32 updrp1; /* UTOPIA/POS device 1 receive priority low */
- __be32 updrp2; /* UTOPIA/POS device 2 receive priority low */
- __be32 updrp3; /* UTOPIA/POS device 3 receive priority low */
- __be32 updrp4; /* UTOPIA/POS device 4 receive priority low */
- __be32 upde1; /* UTOPIA/POS device 1 event */
- __be32 upde2; /* UTOPIA/POS device 2 event */
- __be32 upde3; /* UTOPIA/POS device 3 event */
- __be32 upde4; /* UTOPIA/POS device 4 event */
- __be16 uprp1;
- __be16 uprp2;
- __be16 uprp3;
- __be16 uprp4;
- u8 res1[0x8];
- __be16 uptirr1_0; /* Device 1 transmit internal rate 0 */
- __be16 uptirr1_1; /* Device 1 transmit internal rate 1 */
- __be16 uptirr1_2; /* Device 1 transmit internal rate 2 */
- __be16 uptirr1_3; /* Device 1 transmit internal rate 3 */
- __be16 uptirr2_0; /* Device 2 transmit internal rate 0 */
- __be16 uptirr2_1; /* Device 2 transmit internal rate 1 */
- __be16 uptirr2_2; /* Device 2 transmit internal rate 2 */
- __be16 uptirr2_3; /* Device 2 transmit internal rate 3 */
- __be16 uptirr3_0; /* Device 3 transmit internal rate 0 */
- __be16 uptirr3_1; /* Device 3 transmit internal rate 1 */
- __be16 uptirr3_2; /* Device 3 transmit internal rate 2 */
- __be16 uptirr3_3; /* Device 3 transmit internal rate 3 */
- __be16 uptirr4_0; /* Device 4 transmit internal rate 0 */
- __be16 uptirr4_1; /* Device 4 transmit internal rate 1 */
- __be16 uptirr4_2; /* Device 4 transmit internal rate 2 */
- __be16 uptirr4_3; /* Device 4 transmit internal rate 3 */
- __be32 uper1; /* Device 1 port enable register */
- __be32 uper2; /* Device 2 port enable register */
- __be32 uper3; /* Device 3 port enable register */
- __be32 uper4; /* Device 4 port enable register */
- u8 res2[0x150];
-} __attribute__ ((packed));
-
-/* SDMA */
-struct sdma {
- __be32 sdsr; /* Serial DMA status register */
- __be32 sdmr; /* Serial DMA mode register */
- __be32 sdtr1; /* SDMA system bus threshold register */
- __be32 sdtr2; /* SDMA secondary bus threshold register */
- __be32 sdhy1; /* SDMA system bus hysteresis register */
- __be32 sdhy2; /* SDMA secondary bus hysteresis register */
- __be32 sdta1; /* SDMA system bus address register */
- __be32 sdta2; /* SDMA secondary bus address register */
- __be32 sdtm1; /* SDMA system bus MSNUM register */
- __be32 sdtm2; /* SDMA secondary bus MSNUM register */
- u8 res0[0x10];
- __be32 sdaqr; /* SDMA address bus qualify register */
- __be32 sdaqmr; /* SDMA address bus qualify mask register */
- u8 res1[0x4];
- __be32 sdebcr; /* SDMA CAM entries base register */
- u8 res2[0x38];
-} __attribute__ ((packed));
-
-/* Debug Space */
-struct dbg {
- __be32 bpdcr; /* Breakpoint debug command register */
- __be32 bpdsr; /* Breakpoint debug status register */
- __be32 bpdmr; /* Breakpoint debug mask register */
- __be32 bprmrr0; /* Breakpoint request mode risc register 0 */
- __be32 bprmrr1; /* Breakpoint request mode risc register 1 */
- u8 res0[0x8];
- __be32 bprmtr0; /* Breakpoint request mode trb register 0 */
- __be32 bprmtr1; /* Breakpoint request mode trb register 1 */
- u8 res1[0x8];
- __be32 bprmir; /* Breakpoint request mode immediate register */
- __be32 bprmsr; /* Breakpoint request mode serial register */
- __be32 bpemr; /* Breakpoint exit mode register */
- u8 res2[0x48];
-} __attribute__ ((packed));
-
-/*
- * RISC Special Registers (Trap and Breakpoint). These are described in
- * the QE Developer's Handbook.
- */
-struct rsp {
- __be32 tibcr[16]; /* Trap/instruction breakpoint control regs */
- u8 res0[64];
- __be32 ibcr0;
- __be32 ibs0;
- __be32 ibcnr0;
- u8 res1[4];
- __be32 ibcr1;
- __be32 ibs1;
- __be32 ibcnr1;
- __be32 npcr;
- __be32 dbcr;
- __be32 dbar;
- __be32 dbamr;
- __be32 dbsr;
- __be32 dbcnr;
- u8 res2[12];
- __be32 dbdr_h;
- __be32 dbdr_l;
- __be32 dbdmr_h;
- __be32 dbdmr_l;
- __be32 bsr;
- __be32 bor;
- __be32 bior;
- u8 res3[4];
- __be32 iatr[4];
- __be32 eccr; /* Exception control configuration register */
- __be32 eicr;
- u8 res4[0x100-0xf8];
-} __attribute__ ((packed));
-
-struct qe_immap {
- struct qe_iram iram; /* I-RAM */
- struct qe_ic_regs ic; /* Interrupt Controller */
- struct cp_qe cp; /* Communications Processor */
- struct qe_mux qmx; /* QE Multiplexer */
- struct qe_timers qet; /* QE Timers */
- struct spi spi[0x2]; /* spi */
- struct qe_mcc mcc; /* mcc */
- struct qe_brg brg; /* brg */
- struct qe_usb_ctlr usb; /* USB */
- struct si1 si1; /* SI */
- u8 res11[0x800];
- struct sir sir; /* SI Routing Tables */
- struct ucc ucc1; /* ucc1 */
- struct ucc ucc3; /* ucc3 */
- struct ucc ucc5; /* ucc5 */
- struct ucc ucc7; /* ucc7 */
- u8 res12[0x600];
- struct upc upc1; /* MultiPHY UTOPIA POS Ctrlr 1*/
- struct ucc ucc2; /* ucc2 */
- struct ucc ucc4; /* ucc4 */
- struct ucc ucc6; /* ucc6 */
- struct ucc ucc8; /* ucc8 */
- u8 res13[0x600];
- struct upc upc2; /* MultiPHY UTOPIA POS Ctrlr 2*/
- struct sdma sdma; /* SDMA */
- struct dbg dbg; /* 0x104080 - 0x1040FF
- Debug Space */
- struct rsp rsp[0x2]; /* 0x104100 - 0x1042FF
- RISC Special Registers
- (Trap and Breakpoint) */
- u8 res14[0x300]; /* 0x104300 - 0x1045FF */
- u8 res15[0x3A00]; /* 0x104600 - 0x107FFF */
- u8 res16[0x8000]; /* 0x108000 - 0x110000 */
- u8 muram[0xC000]; /* 0x110000 - 0x11C000
- Multi-user RAM */
- u8 res17[0x24000]; /* 0x11C000 - 0x140000 */
- u8 res18[0xC0000]; /* 0x140000 - 0x200000 */
-} __attribute__ ((packed));
-
-extern struct qe_immap __iomem *qe_immr;
-extern phys_addr_t get_qe_base(void);
-
-/*
- * Returns the offset within the QE address space of the given pointer.
- *
- * Note that the QE does not support 36-bit physical addresses, so if
- * get_qe_base() returns a number above 4GB, the caller will probably fail.
- */
-static inline phys_addr_t immrbar_virt_to_phys(void *address)
-{
- void *q = (void *)qe_immr;
-
- /* Is it a MURAM address? */
- if ((address >= q) && (address < (q + QE_IMMAP_SIZE)))
- return get_qe_base() + (address - q);
-
- /* It's an address returned by kmalloc */
- return virt_to_phys(address);
-}
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_IMMAP_QE_H */
diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h
deleted file mode 100644
index 32b9bfa..0000000
--- a/arch/powerpc/include/asm/qe.h
+++ /dev/null
@@ -1,740 +0,0 @@
-/*
- * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Authors: Shlomi Gridish <gridish@freescale.com>
- * Li Yang <leoli@freescale.com>
- *
- * Description:
- * QUICC Engine (QE) external definitions and structure.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#ifndef _ASM_POWERPC_QE_H
-#define _ASM_POWERPC_QE_H
-#ifdef __KERNEL__
-
-#include <linux/spinlock.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <asm/cpm.h>
-#include <asm/immap_qe.h>
-
-#define QE_NUM_OF_SNUM 256 /* There are 256 serial number in QE */
-#define QE_NUM_OF_BRGS 16
-#define QE_NUM_OF_PORTS 1024
-
-/* Memory partitions
-*/
-#define MEM_PART_SYSTEM 0
-#define MEM_PART_SECONDARY 1
-#define MEM_PART_MURAM 2
-
-/* Clocks and BRGs */
-enum qe_clock {
- QE_CLK_NONE = 0,
- QE_BRG1, /* Baud Rate Generator 1 */
- QE_BRG2, /* Baud Rate Generator 2 */
- QE_BRG3, /* Baud Rate Generator 3 */
- QE_BRG4, /* Baud Rate Generator 4 */
- QE_BRG5, /* Baud Rate Generator 5 */
- QE_BRG6, /* Baud Rate Generator 6 */
- QE_BRG7, /* Baud Rate Generator 7 */
- QE_BRG8, /* Baud Rate Generator 8 */
- QE_BRG9, /* Baud Rate Generator 9 */
- QE_BRG10, /* Baud Rate Generator 10 */
- QE_BRG11, /* Baud Rate Generator 11 */
- QE_BRG12, /* Baud Rate Generator 12 */
- QE_BRG13, /* Baud Rate Generator 13 */
- QE_BRG14, /* Baud Rate Generator 14 */
- QE_BRG15, /* Baud Rate Generator 15 */
- QE_BRG16, /* Baud Rate Generator 16 */
- QE_CLK1, /* Clock 1 */
- QE_CLK2, /* Clock 2 */
- QE_CLK3, /* Clock 3 */
- QE_CLK4, /* Clock 4 */
- QE_CLK5, /* Clock 5 */
- QE_CLK6, /* Clock 6 */
- QE_CLK7, /* Clock 7 */
- QE_CLK8, /* Clock 8 */
- QE_CLK9, /* Clock 9 */
- QE_CLK10, /* Clock 10 */
- QE_CLK11, /* Clock 11 */
- QE_CLK12, /* Clock 12 */
- QE_CLK13, /* Clock 13 */
- QE_CLK14, /* Clock 14 */
- QE_CLK15, /* Clock 15 */
- QE_CLK16, /* Clock 16 */
- QE_CLK17, /* Clock 17 */
- QE_CLK18, /* Clock 18 */
- QE_CLK19, /* Clock 19 */
- QE_CLK20, /* Clock 20 */
- QE_CLK21, /* Clock 21 */
- QE_CLK22, /* Clock 22 */
- QE_CLK23, /* Clock 23 */
- QE_CLK24, /* Clock 24 */
- QE_CLK_DUMMY
-};
-
-static inline bool qe_clock_is_brg(enum qe_clock clk)
-{
- return clk >= QE_BRG1 && clk <= QE_BRG16;
-}
-
-extern spinlock_t cmxgcr_lock;
-
-/* Export QE common operations */
-#ifdef CONFIG_QUICC_ENGINE
-extern void qe_reset(void);
-#else
-static inline void qe_reset(void) {}
-#endif
-
-/* QE PIO */
-#define QE_PIO_PINS 32
-
-struct qe_pio_regs {
- __be32 cpodr; /* Open drain register */
- __be32 cpdata; /* Data register */
- __be32 cpdir1; /* Direction register */
- __be32 cpdir2; /* Direction register */
- __be32 cppar1; /* Pin assignment register */
- __be32 cppar2; /* Pin assignment register */
-#ifdef CONFIG_PPC_85xx
- u8 pad[8];
-#endif
-};
-
-#define QE_PIO_DIR_IN 2
-#define QE_PIO_DIR_OUT 1
-extern void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin,
- int dir, int open_drain, int assignment,
- int has_irq);
-#ifdef CONFIG_QUICC_ENGINE
-extern int par_io_init(struct device_node *np);
-extern int par_io_of_config(struct device_node *np);
-extern int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
- int assignment, int has_irq);
-extern int par_io_data_set(u8 port, u8 pin, u8 val);
-#else
-static inline int par_io_init(struct device_node *np) { return -ENOSYS; }
-static inline int par_io_of_config(struct device_node *np) { return -ENOSYS; }
-static inline int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
- int assignment, int has_irq) { return -ENOSYS; }
-static inline int par_io_data_set(u8 port, u8 pin, u8 val) { return -ENOSYS; }
-#endif /* CONFIG_QUICC_ENGINE */
-
-/*
- * Pin multiplexing functions.
- */
-struct qe_pin;
-#ifdef CONFIG_QE_GPIO
-extern struct qe_pin *qe_pin_request(struct device_node *np, int index);
-extern void qe_pin_free(struct qe_pin *qe_pin);
-extern void qe_pin_set_gpio(struct qe_pin *qe_pin);
-extern void qe_pin_set_dedicated(struct qe_pin *pin);
-#else
-static inline struct qe_pin *qe_pin_request(struct device_node *np, int index)
-{
- return ERR_PTR(-ENOSYS);
-}
-static inline void qe_pin_free(struct qe_pin *qe_pin) {}
-static inline void qe_pin_set_gpio(struct qe_pin *qe_pin) {}
-static inline void qe_pin_set_dedicated(struct qe_pin *pin) {}
-#endif /* CONFIG_QE_GPIO */
-
-#ifdef CONFIG_QUICC_ENGINE
-int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input);
-#else
-static inline int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol,
- u32 cmd_input)
-{
- return -ENOSYS;
-}
-#endif /* CONFIG_QUICC_ENGINE */
-
-/* QE internal API */
-enum qe_clock qe_clock_source(const char *source);
-unsigned int qe_get_brg_clk(void);
-int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier);
-int qe_get_snum(void);
-void qe_put_snum(u8 snum);
-unsigned int qe_get_num_of_risc(void);
-unsigned int qe_get_num_of_snums(void);
-
-static inline int qe_alive_during_sleep(void)
-{
- /*
- * MPC8568E reference manual says:
- *
- * "...power down sequence waits for all I/O interfaces to become idle.
- * In some applications this may happen eventually without actively
- * shutting down interfaces, but most likely, software will have to
- * take steps to shut down the eTSEC, QUICC Engine Block, and PCI
- * interfaces before issuing the command (either the write to the core
- * MSR[WE] as described above or writing to POWMGTCSR) to put the
- * device into sleep state."
- *
- * MPC8569E reference manual has a similar paragraph.
- */
-#ifdef CONFIG_PPC_85xx
- return 0;
-#else
- return 1;
-#endif
-}
-
-/* we actually use cpm_muram implementation, define this for convenience */
-#define qe_muram_init cpm_muram_init
-#define qe_muram_alloc cpm_muram_alloc
-#define qe_muram_alloc_fixed cpm_muram_alloc_fixed
-#define qe_muram_free cpm_muram_free
-#define qe_muram_addr cpm_muram_addr
-#define qe_muram_offset cpm_muram_offset
-
-/* Structure that defines QE firmware binary files.
- *
- * See Documentation/powerpc/qe_firmware.txt for a description of these
- * fields.
- */
-struct qe_firmware {
- struct qe_header {
- __be32 length; /* Length of the entire structure, in bytes */
- u8 magic[3]; /* Set to { 'Q', 'E', 'F' } */
- u8 version; /* Version of this layout. First ver is '1' */
- } header;
- u8 id[62]; /* Null-terminated identifier string */
- u8 split; /* 0 = shared I-RAM, 1 = split I-RAM */
- u8 count; /* Number of microcode[] structures */
- struct {
- __be16 model; /* The SOC model */
- u8 major; /* The SOC revision major */
- u8 minor; /* The SOC revision minor */
- } __attribute__ ((packed)) soc;
- u8 padding[4]; /* Reserved, for alignment */
- __be64 extended_modes; /* Extended modes */
- __be32 vtraps[8]; /* Virtual trap addresses */
- u8 reserved[4]; /* Reserved, for future expansion */
- struct qe_microcode {
- u8 id[32]; /* Null-terminated identifier */
- __be32 traps[16]; /* Trap addresses, 0 == ignore */
- __be32 eccr; /* The value for the ECCR register */
- __be32 iram_offset; /* Offset into I-RAM for the code */
- __be32 count; /* Number of 32-bit words of the code */
- __be32 code_offset; /* Offset of the actual microcode */
- u8 major; /* The microcode version major */
- u8 minor; /* The microcode version minor */
- u8 revision; /* The microcode version revision */
- u8 padding; /* Reserved, for alignment */
- u8 reserved[4]; /* Reserved, for future expansion */
- } __attribute__ ((packed)) microcode[1];
- /* All microcode binaries should be located here */
- /* CRC32 should be located here, after the microcode binaries */
-} __attribute__ ((packed));
-
-struct qe_firmware_info {
- char id[64]; /* Firmware name */
- u32 vtraps[8]; /* Virtual trap addresses */
- u64 extended_modes; /* Extended modes */
-};
-
-#ifdef CONFIG_QUICC_ENGINE
-/* Upload a firmware to the QE */
-int qe_upload_firmware(const struct qe_firmware *firmware);
-#else
-static inline int qe_upload_firmware(const struct qe_firmware *firmware)
-{
- return -ENOSYS;
-}
-#endif /* CONFIG_QUICC_ENGINE */
-
-/* Obtain information on the uploaded firmware */
-struct qe_firmware_info *qe_get_firmware_info(void);
-
-/* QE USB */
-int qe_usb_clock_set(enum qe_clock clk, int rate);
-
-/* Buffer descriptors */
-struct qe_bd {
- __be16 status;
- __be16 length;
- __be32 buf;
-} __attribute__ ((packed));
-
-#define BD_STATUS_MASK 0xffff0000
-#define BD_LENGTH_MASK 0x0000ffff
-
-/* Alignment */
-#define QE_INTR_TABLE_ALIGN 16 /* ??? */
-#define QE_ALIGNMENT_OF_BD 8
-#define QE_ALIGNMENT_OF_PRAM 64
-
-/* RISC allocation */
-#define QE_RISC_ALLOCATION_RISC1 0x1 /* RISC 1 */
-#define QE_RISC_ALLOCATION_RISC2 0x2 /* RISC 2 */
-#define QE_RISC_ALLOCATION_RISC3 0x4 /* RISC 3 */
-#define QE_RISC_ALLOCATION_RISC4 0x8 /* RISC 4 */
-#define QE_RISC_ALLOCATION_RISC1_AND_RISC2 (QE_RISC_ALLOCATION_RISC1 | \
- QE_RISC_ALLOCATION_RISC2)
-#define QE_RISC_ALLOCATION_FOUR_RISCS (QE_RISC_ALLOCATION_RISC1 | \
- QE_RISC_ALLOCATION_RISC2 | \
- QE_RISC_ALLOCATION_RISC3 | \
- QE_RISC_ALLOCATION_RISC4)
-
-/* QE extended filtering Table Lookup Key Size */
-enum qe_fltr_tbl_lookup_key_size {
- QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES
- = 0x3f, /* LookupKey parsed by the Generate LookupKey
- CMD is truncated to 8 bytes */
- QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES
- = 0x5f, /* LookupKey parsed by the Generate LookupKey
- CMD is truncated to 16 bytes */
-};
-
-/* QE FLTR extended filtering Largest External Table Lookup Key Size */
-enum qe_fltr_largest_external_tbl_lookup_key_size {
- QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE
- = 0x0,/* not used */
- QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES
- = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES, /* 8 bytes */
- QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES
- = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES, /* 16 bytes */
-};
-
-/* structure representing QE parameter RAM */
-struct qe_timer_tables {
- u16 tm_base; /* QE timer table base adr */
- u16 tm_ptr; /* QE timer table pointer */
- u16 r_tmr; /* QE timer mode register */
- u16 r_tmv; /* QE timer valid register */
- u32 tm_cmd; /* QE timer cmd register */
- u32 tm_cnt; /* QE timer internal cnt */
-} __attribute__ ((packed));
-
-#define QE_FLTR_TAD_SIZE 8
-
-/* QE extended filtering Termination Action Descriptor (TAD) */
-struct qe_fltr_tad {
- u8 serialized[QE_FLTR_TAD_SIZE];
-} __attribute__ ((packed));
-
-/* Communication Direction */
-enum comm_dir {
- COMM_DIR_NONE = 0,
- COMM_DIR_RX = 1,
- COMM_DIR_TX = 2,
- COMM_DIR_RX_AND_TX = 3
-};
-
-/* QE CMXUCR Registers.
- * There are two UCCs represented in each of the four CMXUCR registers.
- * These values are for the UCC in the LSBs
- */
-#define QE_CMXUCR_MII_ENET_MNG 0x00007000
-#define QE_CMXUCR_MII_ENET_MNG_SHIFT 12
-#define QE_CMXUCR_GRANT 0x00008000
-#define QE_CMXUCR_TSA 0x00004000
-#define QE_CMXUCR_BKPT 0x00000100
-#define QE_CMXUCR_TX_CLK_SRC_MASK 0x0000000F
-
-/* QE CMXGCR Registers.
-*/
-#define QE_CMXGCR_MII_ENET_MNG 0x00007000
-#define QE_CMXGCR_MII_ENET_MNG_SHIFT 12
-#define QE_CMXGCR_USBCS 0x0000000f
-#define QE_CMXGCR_USBCS_CLK3 0x1
-#define QE_CMXGCR_USBCS_CLK5 0x2
-#define QE_CMXGCR_USBCS_CLK7 0x3
-#define QE_CMXGCR_USBCS_CLK9 0x4
-#define QE_CMXGCR_USBCS_CLK13 0x5
-#define QE_CMXGCR_USBCS_CLK17 0x6
-#define QE_CMXGCR_USBCS_CLK19 0x7
-#define QE_CMXGCR_USBCS_CLK21 0x8
-#define QE_CMXGCR_USBCS_BRG9 0x9
-#define QE_CMXGCR_USBCS_BRG10 0xa
-
-/* QE CECR Commands.
-*/
-#define QE_CR_FLG 0x00010000
-#define QE_RESET 0x80000000
-#define QE_INIT_TX_RX 0x00000000
-#define QE_INIT_RX 0x00000001
-#define QE_INIT_TX 0x00000002
-#define QE_ENTER_HUNT_MODE 0x00000003
-#define QE_STOP_TX 0x00000004
-#define QE_GRACEFUL_STOP_TX 0x00000005
-#define QE_RESTART_TX 0x00000006
-#define QE_CLOSE_RX_BD 0x00000007
-#define QE_SWITCH_COMMAND 0x00000007
-#define QE_SET_GROUP_ADDRESS 0x00000008
-#define QE_START_IDMA 0x00000009
-#define QE_MCC_STOP_RX 0x00000009
-#define QE_ATM_TRANSMIT 0x0000000a
-#define QE_HPAC_CLEAR_ALL 0x0000000b
-#define QE_GRACEFUL_STOP_RX 0x0000001a
-#define QE_RESTART_RX 0x0000001b
-#define QE_HPAC_SET_PRIORITY 0x0000010b
-#define QE_HPAC_STOP_TX 0x0000020b
-#define QE_HPAC_STOP_RX 0x0000030b
-#define QE_HPAC_GRACEFUL_STOP_TX 0x0000040b
-#define QE_HPAC_GRACEFUL_STOP_RX 0x0000050b
-#define QE_HPAC_START_TX 0x0000060b
-#define QE_HPAC_START_RX 0x0000070b
-#define QE_USB_STOP_TX 0x0000000a
-#define QE_USB_RESTART_TX 0x0000000c
-#define QE_QMC_STOP_TX 0x0000000c
-#define QE_QMC_STOP_RX 0x0000000d
-#define QE_SS7_SU_FIL_RESET 0x0000000e
-/* jonathbr added from here down for 83xx */
-#define QE_RESET_BCS 0x0000000a
-#define QE_MCC_INIT_TX_RX_16 0x00000003
-#define QE_MCC_STOP_TX 0x00000004
-#define QE_MCC_INIT_TX_1 0x00000005
-#define QE_MCC_INIT_RX_1 0x00000006
-#define QE_MCC_RESET 0x00000007
-#define QE_SET_TIMER 0x00000008
-#define QE_RANDOM_NUMBER 0x0000000c
-#define QE_ATM_MULTI_THREAD_INIT 0x00000011
-#define QE_ASSIGN_PAGE 0x00000012
-#define QE_ADD_REMOVE_HASH_ENTRY 0x00000013
-#define QE_START_FLOW_CONTROL 0x00000014
-#define QE_STOP_FLOW_CONTROL 0x00000015
-#define QE_ASSIGN_PAGE_TO_DEVICE 0x00000016
-
-#define QE_ASSIGN_RISC 0x00000010
-#define QE_CR_MCN_NORMAL_SHIFT 6
-#define QE_CR_MCN_USB_SHIFT 4
-#define QE_CR_MCN_RISC_ASSIGN_SHIFT 8
-#define QE_CR_SNUM_SHIFT 17
-
-/* QE CECR Sub Block - sub block of QE command.
-*/
-#define QE_CR_SUBBLOCK_INVALID 0x00000000
-#define QE_CR_SUBBLOCK_USB 0x03200000
-#define QE_CR_SUBBLOCK_UCCFAST1 0x02000000
-#define QE_CR_SUBBLOCK_UCCFAST2 0x02200000
-#define QE_CR_SUBBLOCK_UCCFAST3 0x02400000
-#define QE_CR_SUBBLOCK_UCCFAST4 0x02600000
-#define QE_CR_SUBBLOCK_UCCFAST5 0x02800000
-#define QE_CR_SUBBLOCK_UCCFAST6 0x02a00000
-#define QE_CR_SUBBLOCK_UCCFAST7 0x02c00000
-#define QE_CR_SUBBLOCK_UCCFAST8 0x02e00000
-#define QE_CR_SUBBLOCK_UCCSLOW1 0x00000000
-#define QE_CR_SUBBLOCK_UCCSLOW2 0x00200000
-#define QE_CR_SUBBLOCK_UCCSLOW3 0x00400000
-#define QE_CR_SUBBLOCK_UCCSLOW4 0x00600000
-#define QE_CR_SUBBLOCK_UCCSLOW5 0x00800000
-#define QE_CR_SUBBLOCK_UCCSLOW6 0x00a00000
-#define QE_CR_SUBBLOCK_UCCSLOW7 0x00c00000
-#define QE_CR_SUBBLOCK_UCCSLOW8 0x00e00000
-#define QE_CR_SUBBLOCK_MCC1 0x03800000
-#define QE_CR_SUBBLOCK_MCC2 0x03a00000
-#define QE_CR_SUBBLOCK_MCC3 0x03000000
-#define QE_CR_SUBBLOCK_IDMA1 0x02800000
-#define QE_CR_SUBBLOCK_IDMA2 0x02a00000
-#define QE_CR_SUBBLOCK_IDMA3 0x02c00000
-#define QE_CR_SUBBLOCK_IDMA4 0x02e00000
-#define QE_CR_SUBBLOCK_HPAC 0x01e00000
-#define QE_CR_SUBBLOCK_SPI1 0x01400000
-#define QE_CR_SUBBLOCK_SPI2 0x01600000
-#define QE_CR_SUBBLOCK_RAND 0x01c00000
-#define QE_CR_SUBBLOCK_TIMER 0x01e00000
-#define QE_CR_SUBBLOCK_GENERAL 0x03c00000
-
-/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command */
-#define QE_CR_PROTOCOL_UNSPECIFIED 0x00 /* For all other protocols */
-#define QE_CR_PROTOCOL_HDLC_TRANSPARENT 0x00
-#define QE_CR_PROTOCOL_QMC 0x02
-#define QE_CR_PROTOCOL_UART 0x04
-#define QE_CR_PROTOCOL_ATM_POS 0x0A
-#define QE_CR_PROTOCOL_ETHERNET 0x0C
-#define QE_CR_PROTOCOL_L2_SWITCH 0x0D
-
-/* BRG configuration register */
-#define QE_BRGC_ENABLE 0x00010000
-#define QE_BRGC_DIVISOR_SHIFT 1
-#define QE_BRGC_DIVISOR_MAX 0xFFF
-#define QE_BRGC_DIV16 1
-
-/* QE Timers registers */
-#define QE_GTCFR1_PCAS 0x80
-#define QE_GTCFR1_STP2 0x20
-#define QE_GTCFR1_RST2 0x10
-#define QE_GTCFR1_GM2 0x08
-#define QE_GTCFR1_GM1 0x04
-#define QE_GTCFR1_STP1 0x02
-#define QE_GTCFR1_RST1 0x01
-
-/* SDMA registers */
-#define QE_SDSR_BER1 0x02000000
-#define QE_SDSR_BER2 0x01000000
-
-#define QE_SDMR_GLB_1_MSK 0x80000000
-#define QE_SDMR_ADR_SEL 0x20000000
-#define QE_SDMR_BER1_MSK 0x02000000
-#define QE_SDMR_BER2_MSK 0x01000000
-#define QE_SDMR_EB1_MSK 0x00800000
-#define QE_SDMR_ER1_MSK 0x00080000
-#define QE_SDMR_ER2_MSK 0x00040000
-#define QE_SDMR_CEN_MASK 0x0000E000
-#define QE_SDMR_SBER_1 0x00000200
-#define QE_SDMR_SBER_2 0x00000200
-#define QE_SDMR_EB1_PR_MASK 0x000000C0
-#define QE_SDMR_ER1_PR 0x00000008
-
-#define QE_SDMR_CEN_SHIFT 13
-#define QE_SDMR_EB1_PR_SHIFT 6
-
-#define QE_SDTM_MSNUM_SHIFT 24
-
-#define QE_SDEBCR_BA_MASK 0x01FFFFFF
-
-/* Communication Processor */
-#define QE_CP_CERCR_MEE 0x8000 /* Multi-user RAM ECC enable */
-#define QE_CP_CERCR_IEE 0x4000 /* Instruction RAM ECC enable */
-#define QE_CP_CERCR_CIR 0x0800 /* Common instruction RAM */
-
-/* I-RAM */
-#define QE_IRAM_IADD_AIE 0x80000000 /* Auto Increment Enable */
-#define QE_IRAM_IADD_BADDR 0x00080000 /* Base Address */
-#define QE_IRAM_READY 0x80000000 /* Ready */
-
-/* UPC */
-#define UPGCR_PROTOCOL 0x80000000 /* protocol ul2 or pl2 */
-#define UPGCR_TMS 0x40000000 /* Transmit master/slave mode */
-#define UPGCR_RMS 0x20000000 /* Receive master/slave mode */
-#define UPGCR_ADDR 0x10000000 /* Master MPHY Addr multiplexing */
-#define UPGCR_DIAG 0x01000000 /* Diagnostic mode */
-
-/* UCC GUEMR register */
-#define UCC_GUEMR_MODE_MASK_RX 0x02
-#define UCC_GUEMR_MODE_FAST_RX 0x02
-#define UCC_GUEMR_MODE_SLOW_RX 0x00
-#define UCC_GUEMR_MODE_MASK_TX 0x01
-#define UCC_GUEMR_MODE_FAST_TX 0x01
-#define UCC_GUEMR_MODE_SLOW_TX 0x00
-#define UCC_GUEMR_MODE_MASK (UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX)
-#define UCC_GUEMR_SET_RESERVED3 0x10 /* Bit 3 in the guemr is reserved but
- must be set 1 */
-
-/* structure representing UCC SLOW parameter RAM */
-struct ucc_slow_pram {
- __be16 rbase; /* RX BD base address */
- __be16 tbase; /* TX BD base address */
- u8 rbmr; /* RX bus mode register (same as CPM's RFCR) */
- u8 tbmr; /* TX bus mode register (same as CPM's TFCR) */
- __be16 mrblr; /* Rx buffer length */
- __be32 rstate; /* Rx internal state */
- __be32 rptr; /* Rx internal data pointer */
- __be16 rbptr; /* rb BD Pointer */
- __be16 rcount; /* Rx internal byte count */
- __be32 rtemp; /* Rx temp */
- __be32 tstate; /* Tx internal state */
- __be32 tptr; /* Tx internal data pointer */
- __be16 tbptr; /* Tx BD pointer */
- __be16 tcount; /* Tx byte count */
- __be32 ttemp; /* Tx temp */
- __be32 rcrc; /* temp receive CRC */
- __be32 tcrc; /* temp transmit CRC */
-} __attribute__ ((packed));
-
-/* General UCC SLOW Mode Register (GUMRH & GUMRL) */
-#define UCC_SLOW_GUMR_H_SAM_QMC 0x00000000
-#define UCC_SLOW_GUMR_H_SAM_SATM 0x00008000
-#define UCC_SLOW_GUMR_H_REVD 0x00002000
-#define UCC_SLOW_GUMR_H_TRX 0x00001000
-#define UCC_SLOW_GUMR_H_TTX 0x00000800
-#define UCC_SLOW_GUMR_H_CDP 0x00000400
-#define UCC_SLOW_GUMR_H_CTSP 0x00000200
-#define UCC_SLOW_GUMR_H_CDS 0x00000100
-#define UCC_SLOW_GUMR_H_CTSS 0x00000080
-#define UCC_SLOW_GUMR_H_TFL 0x00000040
-#define UCC_SLOW_GUMR_H_RFW 0x00000020
-#define UCC_SLOW_GUMR_H_TXSY 0x00000010
-#define UCC_SLOW_GUMR_H_4SYNC 0x00000004
-#define UCC_SLOW_GUMR_H_8SYNC 0x00000008
-#define UCC_SLOW_GUMR_H_16SYNC 0x0000000c
-#define UCC_SLOW_GUMR_H_RTSM 0x00000002
-#define UCC_SLOW_GUMR_H_RSYN 0x00000001
-
-#define UCC_SLOW_GUMR_L_TCI 0x10000000
-#define UCC_SLOW_GUMR_L_RINV 0x02000000
-#define UCC_SLOW_GUMR_L_TINV 0x01000000
-#define UCC_SLOW_GUMR_L_TEND 0x00040000
-#define UCC_SLOW_GUMR_L_TDCR_MASK 0x00030000
-#define UCC_SLOW_GUMR_L_TDCR_32 0x00030000
-#define UCC_SLOW_GUMR_L_TDCR_16 0x00020000
-#define UCC_SLOW_GUMR_L_TDCR_8 0x00010000
-#define UCC_SLOW_GUMR_L_TDCR_1 0x00000000
-#define UCC_SLOW_GUMR_L_RDCR_MASK 0x0000c000
-#define UCC_SLOW_GUMR_L_RDCR_32 0x0000c000
-#define UCC_SLOW_GUMR_L_RDCR_16 0x00008000
-#define UCC_SLOW_GUMR_L_RDCR_8 0x00004000
-#define UCC_SLOW_GUMR_L_RDCR_1 0x00000000
-#define UCC_SLOW_GUMR_L_RENC_NRZI 0x00000800
-#define UCC_SLOW_GUMR_L_RENC_NRZ 0x00000000
-#define UCC_SLOW_GUMR_L_TENC_NRZI 0x00000100
-#define UCC_SLOW_GUMR_L_TENC_NRZ 0x00000000
-#define UCC_SLOW_GUMR_L_DIAG_MASK 0x000000c0
-#define UCC_SLOW_GUMR_L_DIAG_LE 0x000000c0
-#define UCC_SLOW_GUMR_L_DIAG_ECHO 0x00000080
-#define UCC_SLOW_GUMR_L_DIAG_LOOP 0x00000040
-#define UCC_SLOW_GUMR_L_DIAG_NORM 0x00000000
-#define UCC_SLOW_GUMR_L_ENR 0x00000020
-#define UCC_SLOW_GUMR_L_ENT 0x00000010
-#define UCC_SLOW_GUMR_L_MODE_MASK 0x0000000F
-#define UCC_SLOW_GUMR_L_MODE_BISYNC 0x00000008
-#define UCC_SLOW_GUMR_L_MODE_AHDLC 0x00000006
-#define UCC_SLOW_GUMR_L_MODE_UART 0x00000004
-#define UCC_SLOW_GUMR_L_MODE_QMC 0x00000002
-
-/* General UCC FAST Mode Register */
-#define UCC_FAST_GUMR_TCI 0x20000000
-#define UCC_FAST_GUMR_TRX 0x10000000
-#define UCC_FAST_GUMR_TTX 0x08000000
-#define UCC_FAST_GUMR_CDP 0x04000000
-#define UCC_FAST_GUMR_CTSP 0x02000000
-#define UCC_FAST_GUMR_CDS 0x01000000
-#define UCC_FAST_GUMR_CTSS 0x00800000
-#define UCC_FAST_GUMR_TXSY 0x00020000
-#define UCC_FAST_GUMR_RSYN 0x00010000
-#define UCC_FAST_GUMR_RTSM 0x00002000
-#define UCC_FAST_GUMR_REVD 0x00000400
-#define UCC_FAST_GUMR_ENR 0x00000020
-#define UCC_FAST_GUMR_ENT 0x00000010
-
-/* UART Slow UCC Event Register (UCCE) */
-#define UCC_UART_UCCE_AB 0x0200
-#define UCC_UART_UCCE_IDLE 0x0100
-#define UCC_UART_UCCE_GRA 0x0080
-#define UCC_UART_UCCE_BRKE 0x0040
-#define UCC_UART_UCCE_BRKS 0x0020
-#define UCC_UART_UCCE_CCR 0x0008
-#define UCC_UART_UCCE_BSY 0x0004
-#define UCC_UART_UCCE_TX 0x0002
-#define UCC_UART_UCCE_RX 0x0001
-
-/* HDLC Slow UCC Event Register (UCCE) */
-#define UCC_HDLC_UCCE_GLR 0x1000
-#define UCC_HDLC_UCCE_GLT 0x0800
-#define UCC_HDLC_UCCE_IDLE 0x0100
-#define UCC_HDLC_UCCE_BRKE 0x0040
-#define UCC_HDLC_UCCE_BRKS 0x0020
-#define UCC_HDLC_UCCE_TXE 0x0010
-#define UCC_HDLC_UCCE_RXF 0x0008
-#define UCC_HDLC_UCCE_BSY 0x0004
-#define UCC_HDLC_UCCE_TXB 0x0002
-#define UCC_HDLC_UCCE_RXB 0x0001
-
-/* BISYNC Slow UCC Event Register (UCCE) */
-#define UCC_BISYNC_UCCE_GRA 0x0080
-#define UCC_BISYNC_UCCE_TXE 0x0010
-#define UCC_BISYNC_UCCE_RCH 0x0008
-#define UCC_BISYNC_UCCE_BSY 0x0004
-#define UCC_BISYNC_UCCE_TXB 0x0002
-#define UCC_BISYNC_UCCE_RXB 0x0001
-
-/* Gigabit Ethernet Fast UCC Event Register (UCCE) */
-#define UCC_GETH_UCCE_MPD 0x80000000
-#define UCC_GETH_UCCE_SCAR 0x40000000
-#define UCC_GETH_UCCE_GRA 0x20000000
-#define UCC_GETH_UCCE_CBPR 0x10000000
-#define UCC_GETH_UCCE_BSY 0x08000000
-#define UCC_GETH_UCCE_RXC 0x04000000
-#define UCC_GETH_UCCE_TXC 0x02000000
-#define UCC_GETH_UCCE_TXE 0x01000000
-#define UCC_GETH_UCCE_TXB7 0x00800000
-#define UCC_GETH_UCCE_TXB6 0x00400000
-#define UCC_GETH_UCCE_TXB5 0x00200000
-#define UCC_GETH_UCCE_TXB4 0x00100000
-#define UCC_GETH_UCCE_TXB3 0x00080000
-#define UCC_GETH_UCCE_TXB2 0x00040000
-#define UCC_GETH_UCCE_TXB1 0x00020000
-#define UCC_GETH_UCCE_TXB0 0x00010000
-#define UCC_GETH_UCCE_RXB7 0x00008000
-#define UCC_GETH_UCCE_RXB6 0x00004000
-#define UCC_GETH_UCCE_RXB5 0x00002000
-#define UCC_GETH_UCCE_RXB4 0x00001000
-#define UCC_GETH_UCCE_RXB3 0x00000800
-#define UCC_GETH_UCCE_RXB2 0x00000400
-#define UCC_GETH_UCCE_RXB1 0x00000200
-#define UCC_GETH_UCCE_RXB0 0x00000100
-#define UCC_GETH_UCCE_RXF7 0x00000080
-#define UCC_GETH_UCCE_RXF6 0x00000040
-#define UCC_GETH_UCCE_RXF5 0x00000020
-#define UCC_GETH_UCCE_RXF4 0x00000010
-#define UCC_GETH_UCCE_RXF3 0x00000008
-#define UCC_GETH_UCCE_RXF2 0x00000004
-#define UCC_GETH_UCCE_RXF1 0x00000002
-#define UCC_GETH_UCCE_RXF0 0x00000001
-
-/* UCC Protocol Specific Mode Register (UPSMR), when used for UART */
-#define UCC_UART_UPSMR_FLC 0x8000
-#define UCC_UART_UPSMR_SL 0x4000
-#define UCC_UART_UPSMR_CL_MASK 0x3000
-#define UCC_UART_UPSMR_CL_8 0x3000
-#define UCC_UART_UPSMR_CL_7 0x2000
-#define UCC_UART_UPSMR_CL_6 0x1000
-#define UCC_UART_UPSMR_CL_5 0x0000
-#define UCC_UART_UPSMR_UM_MASK 0x0c00
-#define UCC_UART_UPSMR_UM_NORMAL 0x0000
-#define UCC_UART_UPSMR_UM_MAN_MULTI 0x0400
-#define UCC_UART_UPSMR_UM_AUTO_MULTI 0x0c00
-#define UCC_UART_UPSMR_FRZ 0x0200
-#define UCC_UART_UPSMR_RZS 0x0100
-#define UCC_UART_UPSMR_SYN 0x0080
-#define UCC_UART_UPSMR_DRT 0x0040
-#define UCC_UART_UPSMR_PEN 0x0010
-#define UCC_UART_UPSMR_RPM_MASK 0x000c
-#define UCC_UART_UPSMR_RPM_ODD 0x0000
-#define UCC_UART_UPSMR_RPM_LOW 0x0004
-#define UCC_UART_UPSMR_RPM_EVEN 0x0008
-#define UCC_UART_UPSMR_RPM_HIGH 0x000C
-#define UCC_UART_UPSMR_TPM_MASK 0x0003
-#define UCC_UART_UPSMR_TPM_ODD 0x0000
-#define UCC_UART_UPSMR_TPM_LOW 0x0001
-#define UCC_UART_UPSMR_TPM_EVEN 0x0002
-#define UCC_UART_UPSMR_TPM_HIGH 0x0003
-
-/* UCC Protocol Specific Mode Register (UPSMR), when used for Ethernet */
-#define UCC_GETH_UPSMR_FTFE 0x80000000
-#define UCC_GETH_UPSMR_PTPE 0x40000000
-#define UCC_GETH_UPSMR_ECM 0x04000000
-#define UCC_GETH_UPSMR_HSE 0x02000000
-#define UCC_GETH_UPSMR_PRO 0x00400000
-#define UCC_GETH_UPSMR_CAP 0x00200000
-#define UCC_GETH_UPSMR_RSH 0x00100000
-#define UCC_GETH_UPSMR_RPM 0x00080000
-#define UCC_GETH_UPSMR_R10M 0x00040000
-#define UCC_GETH_UPSMR_RLPB 0x00020000
-#define UCC_GETH_UPSMR_TBIM 0x00010000
-#define UCC_GETH_UPSMR_RES1 0x00002000
-#define UCC_GETH_UPSMR_RMM 0x00001000
-#define UCC_GETH_UPSMR_CAM 0x00000400
-#define UCC_GETH_UPSMR_BRO 0x00000200
-#define UCC_GETH_UPSMR_SMM 0x00000080
-#define UCC_GETH_UPSMR_SGMM 0x00000020
-
-/* UCC Transmit On Demand Register (UTODR) */
-#define UCC_SLOW_TOD 0x8000
-#define UCC_FAST_TOD 0x8000
-
-/* UCC Bus Mode Register masks */
-/* Not to be confused with the Bundle Mode Register */
-#define UCC_BMR_GBL 0x20
-#define UCC_BMR_BO_BE 0x10
-#define UCC_BMR_CETM 0x04
-#define UCC_BMR_DTB 0x02
-#define UCC_BMR_BDB 0x01
-
-/* Function code masks */
-#define FC_GBL 0x20
-#define FC_DTB_LCL 0x02
-#define UCC_FAST_FUNCTION_CODE_GBL 0x20
-#define UCC_FAST_FUNCTION_CODE_DTB_LCL 0x02
-#define UCC_FAST_FUNCTION_CODE_BDB_LCL 0x01
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_QE_H */
diff --git a/arch/powerpc/include/asm/qe_ic.h b/arch/powerpc/include/asm/qe_ic.h
deleted file mode 100644
index 25784cc..0000000
--- a/arch/powerpc/include/asm/qe_ic.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Authors: Shlomi Gridish <gridish@freescale.com>
- * Li Yang <leoli@freescale.com>
- *
- * Description:
- * QE IC external definitions and structure.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#ifndef _ASM_POWERPC_QE_IC_H
-#define _ASM_POWERPC_QE_IC_H
-
-#include <linux/irq.h>
-
-struct device_node;
-struct qe_ic;
-
-#define NUM_OF_QE_IC_GROUPS 6
-
-/* Flags when we init the QE IC */
-#define QE_IC_SPREADMODE_GRP_W 0x00000001
-#define QE_IC_SPREADMODE_GRP_X 0x00000002
-#define QE_IC_SPREADMODE_GRP_Y 0x00000004
-#define QE_IC_SPREADMODE_GRP_Z 0x00000008
-#define QE_IC_SPREADMODE_GRP_RISCA 0x00000010
-#define QE_IC_SPREADMODE_GRP_RISCB 0x00000020
-
-#define QE_IC_LOW_SIGNAL 0x00000100
-#define QE_IC_HIGH_SIGNAL 0x00000200
-
-#define QE_IC_GRP_W_PRI0_DEST_SIGNAL_HIGH 0x00001000
-#define QE_IC_GRP_W_PRI1_DEST_SIGNAL_HIGH 0x00002000
-#define QE_IC_GRP_X_PRI0_DEST_SIGNAL_HIGH 0x00004000
-#define QE_IC_GRP_X_PRI1_DEST_SIGNAL_HIGH 0x00008000
-#define QE_IC_GRP_Y_PRI0_DEST_SIGNAL_HIGH 0x00010000
-#define QE_IC_GRP_Y_PRI1_DEST_SIGNAL_HIGH 0x00020000
-#define QE_IC_GRP_Z_PRI0_DEST_SIGNAL_HIGH 0x00040000
-#define QE_IC_GRP_Z_PRI1_DEST_SIGNAL_HIGH 0x00080000
-#define QE_IC_GRP_RISCA_PRI0_DEST_SIGNAL_HIGH 0x00100000
-#define QE_IC_GRP_RISCA_PRI1_DEST_SIGNAL_HIGH 0x00200000
-#define QE_IC_GRP_RISCB_PRI0_DEST_SIGNAL_HIGH 0x00400000
-#define QE_IC_GRP_RISCB_PRI1_DEST_SIGNAL_HIGH 0x00800000
-#define QE_IC_GRP_W_DEST_SIGNAL_SHIFT (12)
-
-/* QE interrupt sources groups */
-enum qe_ic_grp_id {
- QE_IC_GRP_W = 0, /* QE interrupt controller group W */
- QE_IC_GRP_X, /* QE interrupt controller group X */
- QE_IC_GRP_Y, /* QE interrupt controller group Y */
- QE_IC_GRP_Z, /* QE interrupt controller group Z */
- QE_IC_GRP_RISCA, /* QE interrupt controller RISC group A */
- QE_IC_GRP_RISCB /* QE interrupt controller RISC group B */
-};
-
-#ifdef CONFIG_QUICC_ENGINE
-void qe_ic_init(struct device_node *node, unsigned int flags,
- void (*low_handler)(unsigned int irq, struct irq_desc *desc),
- void (*high_handler)(unsigned int irq, struct irq_desc *desc));
-unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic);
-unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic);
-#else
-static inline void qe_ic_init(struct device_node *node, unsigned int flags,
- void (*low_handler)(unsigned int irq, struct irq_desc *desc),
- void (*high_handler)(unsigned int irq, struct irq_desc *desc))
-{}
-static inline unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic)
-{ return 0; }
-static inline unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic)
-{ return 0; }
-#endif /* CONFIG_QUICC_ENGINE */
-
-void qe_ic_set_highest_priority(unsigned int virq, int high);
-int qe_ic_set_priority(unsigned int virq, unsigned int priority);
-int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high);
-
-static inline void qe_ic_cascade_low_ipic(unsigned int irq,
- struct irq_desc *desc)
-{
- struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
- unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
-
- if (cascade_irq != NO_IRQ)
- generic_handle_irq(cascade_irq);
-}
-
-static inline void qe_ic_cascade_high_ipic(unsigned int irq,
- struct irq_desc *desc)
-{
- struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
- unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
-
- if (cascade_irq != NO_IRQ)
- generic_handle_irq(cascade_irq);
-}
-
-static inline void qe_ic_cascade_low_mpic(unsigned int irq,
- struct irq_desc *desc)
-{
- struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
- unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
- struct irq_chip *chip = irq_desc_get_chip(desc);
-
- if (cascade_irq != NO_IRQ)
- generic_handle_irq(cascade_irq);
-
- chip->irq_eoi(&desc->irq_data);
-}
-
-static inline void qe_ic_cascade_high_mpic(unsigned int irq,
- struct irq_desc *desc)
-{
- struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
- unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
- struct irq_chip *chip = irq_desc_get_chip(desc);
-
- if (cascade_irq != NO_IRQ)
- generic_handle_irq(cascade_irq);
-
- chip->irq_eoi(&desc->irq_data);
-}
-
-static inline void qe_ic_cascade_muxed_mpic(unsigned int irq,
- struct irq_desc *desc)
-{
- struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
- unsigned int cascade_irq;
- struct irq_chip *chip = irq_desc_get_chip(desc);
-
- cascade_irq = qe_ic_get_high_irq(qe_ic);
- if (cascade_irq == NO_IRQ)
- cascade_irq = qe_ic_get_low_irq(qe_ic);
-
- if (cascade_irq != NO_IRQ)
- generic_handle_irq(cascade_irq);
-
- chip->irq_eoi(&desc->irq_data);
-}
-
-#endif /* _ASM_POWERPC_QE_IC_H */
diff --git a/arch/powerpc/include/asm/ucc.h b/arch/powerpc/include/asm/ucc.h
deleted file mode 100644
index 6927ac2..0000000
--- a/arch/powerpc/include/asm/ucc.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Authors: Shlomi Gridish <gridish@freescale.com>
- * Li Yang <leoli@freescale.com>
- *
- * Description:
- * Internal header file for UCC unit routines.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#ifndef __UCC_H__
-#define __UCC_H__
-
-#include <asm/immap_qe.h>
-#include <asm/qe.h>
-
-#define STATISTICS
-
-#define UCC_MAX_NUM 8
-
-/* Slow or fast type for UCCs.
-*/
-enum ucc_speed_type {
- UCC_SPEED_TYPE_FAST = UCC_GUEMR_MODE_FAST_RX | UCC_GUEMR_MODE_FAST_TX,
- UCC_SPEED_TYPE_SLOW = UCC_GUEMR_MODE_SLOW_RX | UCC_GUEMR_MODE_SLOW_TX
-};
-
-/* ucc_set_type
- * Sets UCC to slow or fast mode.
- *
- * ucc_num - (In) number of UCC (0-7).
- * speed - (In) slow or fast mode for UCC.
- */
-int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed);
-
-int ucc_set_qe_mux_mii_mng(unsigned int ucc_num);
-
-int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock,
- enum comm_dir mode);
-
-int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask);
-
-/* QE MUX clock routing for UCC
-*/
-static inline int ucc_set_qe_mux_grant(unsigned int ucc_num, int set)
-{
- return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_GRANT);
-}
-
-static inline int ucc_set_qe_mux_tsa(unsigned int ucc_num, int set)
-{
- return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_TSA);
-}
-
-static inline int ucc_set_qe_mux_bkpt(unsigned int ucc_num, int set)
-{
- return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_BKPT);
-}
-
-#endif /* __UCC_H__ */
diff --git a/arch/powerpc/include/asm/ucc_fast.h b/arch/powerpc/include/asm/ucc_fast.h
deleted file mode 100644
index 72ea9ba..0000000
--- a/arch/powerpc/include/asm/ucc_fast.h
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- * Internal header file for UCC FAST unit routines.
- *
- * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Authors: Shlomi Gridish <gridish@freescale.com>
- * Li Yang <leoli@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#ifndef __UCC_FAST_H__
-#define __UCC_FAST_H__
-
-#include <linux/kernel.h>
-
-#include <asm/immap_qe.h>
-#include <asm/qe.h>
-
-#include <asm/ucc.h>
-
-/* Receive BD's status */
-#define R_E 0x80000000 /* buffer empty */
-#define R_W 0x20000000 /* wrap bit */
-#define R_I 0x10000000 /* interrupt on reception */
-#define R_L 0x08000000 /* last */
-#define R_F 0x04000000 /* first */
-
-/* transmit BD's status */
-#define T_R 0x80000000 /* ready bit */
-#define T_W 0x20000000 /* wrap bit */
-#define T_I 0x10000000 /* interrupt on completion */
-#define T_L 0x08000000 /* last */
-
-/* Rx Data buffer must be 4 bytes aligned in most cases */
-#define UCC_FAST_RX_ALIGN 4
-#define UCC_FAST_MRBLR_ALIGNMENT 4
-#define UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT 8
-
-/* Sizes */
-#define UCC_FAST_URFS_MIN_VAL 0x88
-#define UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR 8
-
-/* ucc_fast_channel_protocol_mode - UCC FAST mode */
-enum ucc_fast_channel_protocol_mode {
- UCC_FAST_PROTOCOL_MODE_HDLC = 0x00000000,
- UCC_FAST_PROTOCOL_MODE_RESERVED01 = 0x00000001,
- UCC_FAST_PROTOCOL_MODE_RESERVED_QMC = 0x00000002,
- UCC_FAST_PROTOCOL_MODE_RESERVED02 = 0x00000003,
- UCC_FAST_PROTOCOL_MODE_RESERVED_UART = 0x00000004,
- UCC_FAST_PROTOCOL_MODE_RESERVED03 = 0x00000005,
- UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_1 = 0x00000006,
- UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_2 = 0x00000007,
- UCC_FAST_PROTOCOL_MODE_RESERVED_BISYNC = 0x00000008,
- UCC_FAST_PROTOCOL_MODE_RESERVED04 = 0x00000009,
- UCC_FAST_PROTOCOL_MODE_ATM = 0x0000000A,
- UCC_FAST_PROTOCOL_MODE_RESERVED05 = 0x0000000B,
- UCC_FAST_PROTOCOL_MODE_ETHERNET = 0x0000000C,
- UCC_FAST_PROTOCOL_MODE_RESERVED06 = 0x0000000D,
- UCC_FAST_PROTOCOL_MODE_POS = 0x0000000E,
- UCC_FAST_PROTOCOL_MODE_RESERVED07 = 0x0000000F
-};
-
-/* ucc_fast_transparent_txrx - UCC Fast Transparent TX & RX */
-enum ucc_fast_transparent_txrx {
- UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_NORMAL = 0x00000000,
- UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_TRANSPARENT = 0x18000000
-};
-
-/* UCC fast diagnostic mode */
-enum ucc_fast_diag_mode {
- UCC_FAST_DIAGNOSTIC_NORMAL = 0x0,
- UCC_FAST_DIAGNOSTIC_LOCAL_LOOP_BACK = 0x40000000,
- UCC_FAST_DIAGNOSTIC_AUTO_ECHO = 0x80000000,
- UCC_FAST_DIAGNOSTIC_LOOP_BACK_AND_ECHO = 0xC0000000
-};
-
-/* UCC fast Sync length (transparent mode only) */
-enum ucc_fast_sync_len {
- UCC_FAST_SYNC_LEN_NOT_USED = 0x0,
- UCC_FAST_SYNC_LEN_AUTOMATIC = 0x00004000,
- UCC_FAST_SYNC_LEN_8_BIT = 0x00008000,
- UCC_FAST_SYNC_LEN_16_BIT = 0x0000C000
-};
-
-/* UCC fast RTS mode */
-enum ucc_fast_ready_to_send {
- UCC_FAST_SEND_IDLES_BETWEEN_FRAMES = 0x00000000,
- UCC_FAST_SEND_FLAGS_BETWEEN_FRAMES = 0x00002000
-};
-
-/* UCC fast receiver decoding mode */
-enum ucc_fast_rx_decoding_method {
- UCC_FAST_RX_ENCODING_NRZ = 0x00000000,
- UCC_FAST_RX_ENCODING_NRZI = 0x00000800,
- UCC_FAST_RX_ENCODING_RESERVED0 = 0x00001000,
- UCC_FAST_RX_ENCODING_RESERVED1 = 0x00001800
-};
-
-/* UCC fast transmitter encoding mode */
-enum ucc_fast_tx_encoding_method {
- UCC_FAST_TX_ENCODING_NRZ = 0x00000000,
- UCC_FAST_TX_ENCODING_NRZI = 0x00000100,
- UCC_FAST_TX_ENCODING_RESERVED0 = 0x00000200,
- UCC_FAST_TX_ENCODING_RESERVED1 = 0x00000300
-};
-
-/* UCC fast CRC length */
-enum ucc_fast_transparent_tcrc {
- UCC_FAST_16_BIT_CRC = 0x00000000,
- UCC_FAST_CRC_RESERVED0 = 0x00000040,
- UCC_FAST_32_BIT_CRC = 0x00000080,
- UCC_FAST_CRC_RESERVED1 = 0x000000C0
-};
-
-/* Fast UCC initialization structure */
-struct ucc_fast_info {
- int ucc_num;
- enum qe_clock rx_clock;
- enum qe_clock tx_clock;
- u32 regs;
- int irq;
- u32 uccm_mask;
- int bd_mem_part;
- int brkpt_support;
- int grant_support;
- int tsa;
- int cdp;
- int cds;
- int ctsp;
- int ctss;
- int tci;
- int txsy;
- int rtsm;
- int revd;
- int rsyn;
- u16 max_rx_buf_length;
- u16 urfs;
- u16 urfet;
- u16 urfset;
- u16 utfs;
- u16 utfet;
- u16 utftt;
- u16 ufpt;
- enum ucc_fast_channel_protocol_mode mode;
- enum ucc_fast_transparent_txrx ttx_trx;
- enum ucc_fast_tx_encoding_method tenc;
- enum ucc_fast_rx_decoding_method renc;
- enum ucc_fast_transparent_tcrc tcrc;
- enum ucc_fast_sync_len synl;
-};
-
-struct ucc_fast_private {
- struct ucc_fast_info *uf_info;
- struct ucc_fast __iomem *uf_regs; /* a pointer to the UCC regs. */
- u32 __iomem *p_ucce; /* a pointer to the event register in memory. */
- u32 __iomem *p_uccm; /* a pointer to the mask register in memory. */
-#ifdef CONFIG_UGETH_TX_ON_DEMAND
- u16 __iomem *p_utodr; /* pointer to the transmit on demand register */
-#endif
- int enabled_tx; /* Whether channel is enabled for Tx (ENT) */
- int enabled_rx; /* Whether channel is enabled for Rx (ENR) */
- int stopped_tx; /* Whether channel has been stopped for Tx
- (STOP_TX, etc.) */
- int stopped_rx; /* Whether channel has been stopped for Rx */
- u32 ucc_fast_tx_virtual_fifo_base_offset;/* pointer to base of Tx
- virtual fifo */
- u32 ucc_fast_rx_virtual_fifo_base_offset;/* pointer to base of Rx
- virtual fifo */
-#ifdef STATISTICS
- u32 tx_frames; /* Transmitted frames counter. */
- u32 rx_frames; /* Received frames counter (only frames
- passed to application). */
- u32 tx_discarded; /* Discarded tx frames counter (frames that
- were discarded by the driver due to errors).
- */
- u32 rx_discarded; /* Discarded rx frames counter (frames that
- were discarded by the driver due to errors).
- */
-#endif /* STATISTICS */
- u16 mrblr; /* maximum receive buffer length */
-};
-
-/* ucc_fast_init
- * Initializes Fast UCC according to user provided parameters.
- *
- * uf_info - (In) pointer to the fast UCC info structure.
- * uccf_ret - (Out) pointer to the fast UCC structure.
- */
-int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret);
-
-/* ucc_fast_free
- * Frees all resources for fast UCC.
- *
- * uccf - (In) pointer to the fast UCC structure.
- */
-void ucc_fast_free(struct ucc_fast_private * uccf);
-
-/* ucc_fast_enable
- * Enables a fast UCC port.
- * This routine enables Tx and/or Rx through the General UCC Mode Register.
- *
- * uccf - (In) pointer to the fast UCC structure.
- * mode - (In) TX, RX, or both.
- */
-void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode);
-
-/* ucc_fast_disable
- * Disables a fast UCC port.
- * This routine disables Tx and/or Rx through the General UCC Mode Register.
- *
- * uccf - (In) pointer to the fast UCC structure.
- * mode - (In) TX, RX, or both.
- */
-void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode);
-
-/* ucc_fast_irq
- * Handles interrupts on fast UCC.
- * Called from the general interrupt routine to handle interrupts on fast UCC.
- *
- * uccf - (In) pointer to the fast UCC structure.
- */
-void ucc_fast_irq(struct ucc_fast_private * uccf);
-
-/* ucc_fast_transmit_on_demand
- * Immediately forces a poll of the transmitter for data to be sent.
- * Typically, the hardware performs a periodic poll for data that the
- * transmit routine has set up to be transmitted. In cases where
- * this polling cycle is not soon enough, this optional routine can
- * be invoked to force a poll right away, instead. Proper use for
- * each transmission for which this functionality is desired is to
- * call the transmit routine and then this routine right after.
- *
- * uccf - (In) pointer to the fast UCC structure.
- */
-void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf);
-
-u32 ucc_fast_get_qe_cr_subblock(int uccf_num);
-
-void ucc_fast_dump_regs(struct ucc_fast_private * uccf);
-
-#endif /* __UCC_FAST_H__ */
diff --git a/arch/powerpc/include/asm/ucc_slow.h b/arch/powerpc/include/asm/ucc_slow.h
deleted file mode 100644
index c44131e..0000000
--- a/arch/powerpc/include/asm/ucc_slow.h
+++ /dev/null
@@ -1,290 +0,0 @@
-/*
- * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Authors: Shlomi Gridish <gridish@freescale.com>
- * Li Yang <leoli@freescale.com>
- *
- * Description:
- * Internal header file for UCC SLOW unit routines.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#ifndef __UCC_SLOW_H__
-#define __UCC_SLOW_H__
-
-#include <linux/kernel.h>
-
-#include <asm/immap_qe.h>
-#include <asm/qe.h>
-
-#include <asm/ucc.h>
-
-/* transmit BD's status */
-#define T_R 0x80000000 /* ready bit */
-#define T_PAD 0x40000000 /* add pads to short frames */
-#define T_W 0x20000000 /* wrap bit */
-#define T_I 0x10000000 /* interrupt on completion */
-#define T_L 0x08000000 /* last */
-
-#define T_A 0x04000000 /* Address - the data transmitted as address
- chars */
-#define T_TC 0x04000000 /* transmit CRC */
-#define T_CM 0x02000000 /* continuous mode */
-#define T_DEF 0x02000000 /* collision on previous attempt to transmit */
-#define T_P 0x01000000 /* Preamble - send Preamble sequence before
- data */
-#define T_HB 0x01000000 /* heartbeat */
-#define T_NS 0x00800000 /* No Stop */
-#define T_LC 0x00800000 /* late collision */
-#define T_RL 0x00400000 /* retransmission limit */
-#define T_UN 0x00020000 /* underrun */
-#define T_CT 0x00010000 /* CTS lost */
-#define T_CSL 0x00010000 /* carrier sense lost */
-#define T_RC 0x003c0000 /* retry count */
-
-/* Receive BD's status */
-#define R_E 0x80000000 /* buffer empty */
-#define R_W 0x20000000 /* wrap bit */
-#define R_I 0x10000000 /* interrupt on reception */
-#define R_L 0x08000000 /* last */
-#define R_C 0x08000000 /* the last byte in this buffer is a cntl
- char */
-#define R_F 0x04000000 /* first */
-#define R_A 0x04000000 /* the first byte in this buffer is address
- byte */
-#define R_CM 0x02000000 /* continuous mode */
-#define R_ID 0x01000000 /* buffer close on reception of idles */
-#define R_M 0x01000000 /* Frame received because of promiscuous
- mode */
-#define R_AM 0x00800000 /* Address match */
-#define R_DE 0x00800000 /* Address match */
-#define R_LG 0x00200000 /* Break received */
-#define R_BR 0x00200000 /* Frame length violation */
-#define R_NO 0x00100000 /* Rx Non Octet Aligned Packet */
-#define R_FR 0x00100000 /* Framing Error (no stop bit) character
- received */
-#define R_PR 0x00080000 /* Parity Error character received */
-#define R_AB 0x00080000 /* Frame Aborted */
-#define R_SH 0x00080000 /* frame is too short */
-#define R_CR 0x00040000 /* CRC Error */
-#define R_OV 0x00020000 /* Overrun */
-#define R_CD 0x00010000 /* CD lost */
-#define R_CL 0x00010000 /* this frame is closed because of a
- collision */
-
-/* Rx Data buffer must be 4 bytes aligned in most cases.*/
-#define UCC_SLOW_RX_ALIGN 4
-#define UCC_SLOW_MRBLR_ALIGNMENT 4
-#define UCC_SLOW_PRAM_SIZE 0x100
-#define ALIGNMENT_OF_UCC_SLOW_PRAM 64
-
-/* UCC Slow Channel Protocol Mode */
-enum ucc_slow_channel_protocol_mode {
- UCC_SLOW_CHANNEL_PROTOCOL_MODE_QMC = 0x00000002,
- UCC_SLOW_CHANNEL_PROTOCOL_MODE_UART = 0x00000004,
- UCC_SLOW_CHANNEL_PROTOCOL_MODE_BISYNC = 0x00000008,
-};
-
-/* UCC Slow Transparent Transmit CRC (TCRC) */
-enum ucc_slow_transparent_tcrc {
- /* 16-bit CCITT CRC (HDLC). (X16 + X12 + X5 + 1) */
- UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC16 = 0x00000000,
- /* CRC16 (BISYNC). (X16 + X15 + X2 + 1) */
- UCC_SLOW_TRANSPARENT_TCRC_CRC16 = 0x00004000,
- /* 32-bit CCITT CRC (Ethernet and HDLC) */
- UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC32 = 0x00008000,
-};
-
-/* UCC Slow oversampling rate for transmitter (TDCR) */
-enum ucc_slow_tx_oversampling_rate {
- /* 1x clock mode */
- UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_1 = 0x00000000,
- /* 8x clock mode */
- UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_8 = 0x00010000,
- /* 16x clock mode */
- UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_16 = 0x00020000,
- /* 32x clock mode */
- UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_32 = 0x00030000,
-};
-
-/* UCC Slow Oversampling rate for receiver (RDCR)
-*/
-enum ucc_slow_rx_oversampling_rate {
- /* 1x clock mode */
- UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_1 = 0x00000000,
- /* 8x clock mode */
- UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_8 = 0x00004000,
- /* 16x clock mode */
- UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_16 = 0x00008000,
- /* 32x clock mode */
- UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_32 = 0x0000c000,
-};
-
-/* UCC Slow Transmitter encoding method (TENC)
-*/
-enum ucc_slow_tx_encoding_method {
- UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZ = 0x00000000,
- UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZI = 0x00000100
-};
-
-/* UCC Slow Receiver decoding method (RENC)
-*/
-enum ucc_slow_rx_decoding_method {
- UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZ = 0x00000000,
- UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZI = 0x00000800
-};
-
-/* UCC Slow Diagnostic mode (DIAG)
-*/
-enum ucc_slow_diag_mode {
- UCC_SLOW_DIAG_MODE_NORMAL = 0x00000000,
- UCC_SLOW_DIAG_MODE_LOOPBACK = 0x00000040,
- UCC_SLOW_DIAG_MODE_ECHO = 0x00000080,
- UCC_SLOW_DIAG_MODE_LOOPBACK_ECHO = 0x000000c0
-};
-
-struct ucc_slow_info {
- int ucc_num;
- int protocol; /* QE_CR_PROTOCOL_xxx */
- enum qe_clock rx_clock;
- enum qe_clock tx_clock;
- phys_addr_t regs;
- int irq;
- u16 uccm_mask;
- int data_mem_part;
- int init_tx;
- int init_rx;
- u32 tx_bd_ring_len;
- u32 rx_bd_ring_len;
- int rx_interrupts;
- int brkpt_support;
- int grant_support;
- int tsa;
- int cdp;
- int cds;
- int ctsp;
- int ctss;
- int rinv;
- int tinv;
- int rtsm;
- int rfw;
- int tci;
- int tend;
- int tfl;
- int txsy;
- u16 max_rx_buf_length;
- enum ucc_slow_transparent_tcrc tcrc;
- enum ucc_slow_channel_protocol_mode mode;
- enum ucc_slow_diag_mode diag;
- enum ucc_slow_tx_oversampling_rate tdcr;
- enum ucc_slow_rx_oversampling_rate rdcr;
- enum ucc_slow_tx_encoding_method tenc;
- enum ucc_slow_rx_decoding_method renc;
-};
-
-struct ucc_slow_private {
- struct ucc_slow_info *us_info;
- struct ucc_slow __iomem *us_regs; /* Ptr to memory map of UCC regs */
- struct ucc_slow_pram *us_pram; /* a pointer to the parameter RAM */
- u32 us_pram_offset;
- int enabled_tx; /* Whether channel is enabled for Tx (ENT) */
- int enabled_rx; /* Whether channel is enabled for Rx (ENR) */
- int stopped_tx; /* Whether channel has been stopped for Tx
- (STOP_TX, etc.) */
- int stopped_rx; /* Whether channel has been stopped for Rx */
- struct list_head confQ; /* frames passed to chip waiting for tx */
- u32 first_tx_bd_mask; /* mask is used in Tx routine to save status
- and length for first BD in a frame */
- u32 tx_base_offset; /* first BD in Tx BD table offset (In MURAM) */
- u32 rx_base_offset; /* first BD in Rx BD table offset (In MURAM) */
- struct qe_bd *confBd; /* next BD for confirm after Tx */
- struct qe_bd *tx_bd; /* next BD for new Tx request */
- struct qe_bd *rx_bd; /* next BD to collect after Rx */
- void *p_rx_frame; /* accumulating receive frame */
- u16 *p_ucce; /* a pointer to the event register in memory.
- */
- u16 *p_uccm; /* a pointer to the mask register in memory */
- u16 saved_uccm; /* a saved mask for the RX Interrupt bits */
-#ifdef STATISTICS
- u32 tx_frames; /* Transmitted frames counters */
- u32 rx_frames; /* Received frames counters (only frames
- passed to application) */
- u32 rx_discarded; /* Discarded frames counters (frames that
- were discarded by the driver due to
- errors) */
-#endif /* STATISTICS */
-};
-
-/* ucc_slow_init
- * Initializes Slow UCC according to provided parameters.
- *
- * us_info - (In) pointer to the slow UCC info structure.
- * uccs_ret - (Out) pointer to the slow UCC structure.
- */
-int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret);
-
-/* ucc_slow_free
- * Frees all resources for slow UCC.
- *
- * uccs - (In) pointer to the slow UCC structure.
- */
-void ucc_slow_free(struct ucc_slow_private * uccs);
-
-/* ucc_slow_enable
- * Enables a fast UCC port.
- * This routine enables Tx and/or Rx through the General UCC Mode Register.
- *
- * uccs - (In) pointer to the slow UCC structure.
- * mode - (In) TX, RX, or both.
- */
-void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode);
-
-/* ucc_slow_disable
- * Disables a fast UCC port.
- * This routine disables Tx and/or Rx through the General UCC Mode Register.
- *
- * uccs - (In) pointer to the slow UCC structure.
- * mode - (In) TX, RX, or both.
- */
-void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode);
-
-/* ucc_slow_poll_transmitter_now
- * Immediately forces a poll of the transmitter for data to be sent.
- * Typically, the hardware performs a periodic poll for data that the
- * transmit routine has set up to be transmitted. In cases where
- * this polling cycle is not soon enough, this optional routine can
- * be invoked to force a poll right away, instead. Proper use for
- * each transmission for which this functionality is desired is to
- * call the transmit routine and then this routine right after.
- *
- * uccs - (In) pointer to the slow UCC structure.
- */
-void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs);
-
-/* ucc_slow_graceful_stop_tx
- * Smoothly stops transmission on a specified slow UCC.
- *
- * uccs - (In) pointer to the slow UCC structure.
- */
-void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs);
-
-/* ucc_slow_stop_tx
- * Stops transmission on a specified slow UCC.
- *
- * uccs - (In) pointer to the slow UCC structure.
- */
-void ucc_slow_stop_tx(struct ucc_slow_private * uccs);
-
-/* ucc_slow_restart_tx
- * Restarts transmitting on a specified slow UCC.
- *
- * uccs - (In) pointer to the slow UCC structure.
- */
-void ucc_slow_restart_tx(struct ucc_slow_private *uccs);
-
-u32 ucc_slow_get_qe_cr_subblock(int uccs_num);
-
-#endif /* __UCC_SLOW_H__ */
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index a7b3621..e004c6f 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -47,8 +47,8 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
#include <sysdev/simple_gpio.h>
-#include <asm/qe.h>
-#include <asm/qe_ic.h>
+#include <qe/qe.h>
+#include <qe/qe_ic.h>
#include <asm/mpic.h>
#include <asm/swiotlb.h>
#include <asm/fsl_guts.h>
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
index 53b6fb0..14cbb07 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
@@ -25,8 +25,8 @@
#include <asm/prom.h>
#include <asm/udbg.h>
#include <asm/mpic.h>
-#include <asm/qe.h>
-#include <asm/qe_ic.h>
+#include <qe/qe.h>
+#include <qe/qe_ic.h>
#include <asm/fsl_guts.h>
#include <sysdev/fsl_soc.h>
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index bf9c6d4..d09ae32f 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -278,25 +278,6 @@ config TAU_AVERAGE
If in doubt, say N here.
-config QUICC_ENGINE
- bool "Freescale QUICC Engine (QE) Support"
- depends on FSL_SOC && PPC32
- select PPC_LIB_RHEAP
- select CRC32
- help
- The QUICC Engine (QE) is a new generation of communications
- coprocessors on Freescale embedded CPUs (akin to CPM in older chips).
- Selecting this option means that you wish to build a kernel
- for a machine with a QE coprocessor.
-
-config QE_GPIO
- bool "QE GPIO support"
- depends on QUICC_ENGINE
- select ARCH_REQUIRE_GPIOLIB
- help
- Say Y here if you're going to use hardware that connects to the
- QE GPIOs.
-
config CPM2
bool "Enable support for the CPM2 (Communications Processor Module)"
depends on (FSL_SOC_BOOKE && PPC32) || 8260
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index f67ac90..58dc2c7 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -27,7 +27,6 @@ obj-$(CONFIG_FSL_85XX_CACHE_SRAM) += fsl_85xx_l2ctlr.o fsl_85xx_cache_sram.o
obj-$(CONFIG_SIMPLE_GPIO) += simple_gpio.o
obj-$(CONFIG_FSL_RIO) += fsl_rio.o fsl_rmu.o
obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
-obj-$(CONFIG_QUICC_ENGINE) += qe_lib/
mv64x60-$(CONFIG_PCI) += mv64x60_pci.o
obj-$(CONFIG_MV64X60) += $(mv64x60-y) mv64x60_pic.o mv64x60_dev.o \
mv64x60_udbg.o
diff --git a/arch/powerpc/sysdev/qe_lib/Kconfig b/arch/powerpc/sysdev/qe_lib/Kconfig
deleted file mode 100644
index 3c25199..0000000
--- a/arch/powerpc/sysdev/qe_lib/Kconfig
+++ /dev/null
@@ -1,27 +0,0 @@
-#
-# QE Communication options
-#
-
-config UCC_SLOW
- bool
- default y if SERIAL_QE
- help
- This option provides qe_lib support to UCC slow
- protocols: UART, BISYNC, QMC
-
-config UCC_FAST
- bool
- default y if UCC_GETH
- help
- This option provides qe_lib support to UCC fast
- protocols: HDLC, Ethernet, ATM, transparent
-
-config UCC
- bool
- default y if UCC_FAST || UCC_SLOW
-
-config QE_USB
- bool
- default y if USB_FSL_QE
- help
- QE USB Controller support
diff --git a/arch/powerpc/sysdev/qe_lib/Makefile b/arch/powerpc/sysdev/qe_lib/Makefile
deleted file mode 100644
index f1855c1..0000000
--- a/arch/powerpc/sysdev/qe_lib/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Makefile for the linux ppc-specific parts of QE
-#
-obj-$(CONFIG_QUICC_ENGINE)+= qe.o qe_ic.o qe_io.o
-
-obj-$(CONFIG_UCC) += ucc.o
-obj-$(CONFIG_UCC_SLOW) += ucc_slow.o
-obj-$(CONFIG_UCC_FAST) += ucc_fast.o
-obj-$(CONFIG_QE_USB) += usb.o
-obj-$(CONFIG_QE_GPIO) += gpio.o
diff --git a/arch/powerpc/sysdev/qe_lib/gpio.c b/arch/powerpc/sysdev/qe_lib/gpio.c
deleted file mode 100644
index 521e67a..0000000
--- a/arch/powerpc/sysdev/qe_lib/gpio.c
+++ /dev/null
@@ -1,317 +0,0 @@
-/*
- * QUICC Engine GPIOs
- *
- * Copyright (c) MontaVista Software, Inc. 2008.
- *
- * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_gpio.h>
-#include <linux/gpio.h>
-#include <linux/slab.h>
-#include <linux/export.h>
-#include <asm/qe.h>
-
-struct qe_gpio_chip {
- struct of_mm_gpio_chip mm_gc;
- spinlock_t lock;
-
- unsigned long pin_flags[QE_PIO_PINS];
-#define QE_PIN_REQUESTED 0
-
- /* shadowed data register to clear/set bits safely */
- u32 cpdata;
-
- /* saved_regs used to restore dedicated functions */
- struct qe_pio_regs saved_regs;
-};
-
-static inline struct qe_gpio_chip *
-to_qe_gpio_chip(struct of_mm_gpio_chip *mm_gc)
-{
- return container_of(mm_gc, struct qe_gpio_chip, mm_gc);
-}
-
-static void qe_gpio_save_regs(struct of_mm_gpio_chip *mm_gc)
-{
- struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
- struct qe_pio_regs __iomem *regs = mm_gc->regs;
-
- qe_gc->cpdata = in_be32(®s->cpdata);
- qe_gc->saved_regs.cpdata = qe_gc->cpdata;
- qe_gc->saved_regs.cpdir1 = in_be32(®s->cpdir1);
- qe_gc->saved_regs.cpdir2 = in_be32(®s->cpdir2);
- qe_gc->saved_regs.cppar1 = in_be32(®s->cppar1);
- qe_gc->saved_regs.cppar2 = in_be32(®s->cppar2);
- qe_gc->saved_regs.cpodr = in_be32(®s->cpodr);
-}
-
-static int qe_gpio_get(struct gpio_chip *gc, unsigned int gpio)
-{
- struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
- struct qe_pio_regs __iomem *regs = mm_gc->regs;
- u32 pin_mask = 1 << (QE_PIO_PINS - 1 - gpio);
-
- return in_be32(®s->cpdata) & pin_mask;
-}
-
-static void qe_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
-{
- struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
- struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
- struct qe_pio_regs __iomem *regs = mm_gc->regs;
- unsigned long flags;
- u32 pin_mask = 1 << (QE_PIO_PINS - 1 - gpio);
-
- spin_lock_irqsave(&qe_gc->lock, flags);
-
- if (val)
- qe_gc->cpdata |= pin_mask;
- else
- qe_gc->cpdata &= ~pin_mask;
-
- out_be32(®s->cpdata, qe_gc->cpdata);
-
- spin_unlock_irqrestore(&qe_gc->lock, flags);
-}
-
-static int qe_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
-{
- struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
- struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
- unsigned long flags;
-
- spin_lock_irqsave(&qe_gc->lock, flags);
-
- __par_io_config_pin(mm_gc->regs, gpio, QE_PIO_DIR_IN, 0, 0, 0);
-
- spin_unlock_irqrestore(&qe_gc->lock, flags);
-
- return 0;
-}
-
-static int qe_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
-{
- struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
- struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
- unsigned long flags;
-
- qe_gpio_set(gc, gpio, val);
-
- spin_lock_irqsave(&qe_gc->lock, flags);
-
- __par_io_config_pin(mm_gc->regs, gpio, QE_PIO_DIR_OUT, 0, 0, 0);
-
- spin_unlock_irqrestore(&qe_gc->lock, flags);
-
- return 0;
-}
-
-struct qe_pin {
- /*
- * The qe_gpio_chip name is unfortunate, we should change that to
- * something like qe_pio_controller. Someday.
- */
- struct qe_gpio_chip *controller;
- int num;
-};
-
-/**
- * qe_pin_request - Request a QE pin
- * @np: device node to get a pin from
- * @index: index of a pin in the device tree
- * Context: non-atomic
- *
- * This function return qe_pin so that you could use it with the rest of
- * the QE Pin Multiplexing API.
- */
-struct qe_pin *qe_pin_request(struct device_node *np, int index)
-{
- struct qe_pin *qe_pin;
- struct gpio_chip *gc;
- struct of_mm_gpio_chip *mm_gc;
- struct qe_gpio_chip *qe_gc;
- int err;
- unsigned long flags;
-
- qe_pin = kzalloc(sizeof(*qe_pin), GFP_KERNEL);
- if (!qe_pin) {
- pr_debug("%s: can't allocate memory\n", __func__);
- return ERR_PTR(-ENOMEM);
- }
-
- err = of_get_gpio(np, index);
- if (err < 0)
- goto err0;
- gc = gpio_to_chip(err);
- if (WARN_ON(!gc))
- goto err0;
-
- if (!of_device_is_compatible(gc->of_node, "fsl,mpc8323-qe-pario-bank")) {
- pr_debug("%s: tried to get a non-qe pin\n", __func__);
- err = -EINVAL;
- goto err0;
- }
-
- mm_gc = to_of_mm_gpio_chip(gc);
- qe_gc = to_qe_gpio_chip(mm_gc);
-
- spin_lock_irqsave(&qe_gc->lock, flags);
-
- err -= gc->base;
- if (test_and_set_bit(QE_PIN_REQUESTED, &qe_gc->pin_flags[err]) == 0) {
- qe_pin->controller = qe_gc;
- qe_pin->num = err;
- err = 0;
- } else {
- err = -EBUSY;
- }
-
- spin_unlock_irqrestore(&qe_gc->lock, flags);
-
- if (!err)
- return qe_pin;
-err0:
- kfree(qe_pin);
- pr_debug("%s failed with status %d\n", __func__, err);
- return ERR_PTR(err);
-}
-EXPORT_SYMBOL(qe_pin_request);
-
-/**
- * qe_pin_free - Free a pin
- * @qe_pin: pointer to the qe_pin structure
- * Context: any
- *
- * This function frees the qe_pin structure and makes a pin available
- * for further qe_pin_request() calls.
- */
-void qe_pin_free(struct qe_pin *qe_pin)
-{
- struct qe_gpio_chip *qe_gc = qe_pin->controller;
- unsigned long flags;
- const int pin = qe_pin->num;
-
- spin_lock_irqsave(&qe_gc->lock, flags);
- test_and_clear_bit(QE_PIN_REQUESTED, &qe_gc->pin_flags[pin]);
- spin_unlock_irqrestore(&qe_gc->lock, flags);
-
- kfree(qe_pin);
-}
-EXPORT_SYMBOL(qe_pin_free);
-
-/**
- * qe_pin_set_dedicated - Revert a pin to a dedicated peripheral function mode
- * @qe_pin: pointer to the qe_pin structure
- * Context: any
- *
- * This function resets a pin to a dedicated peripheral function that
- * has been set up by the firmware.
- */
-void qe_pin_set_dedicated(struct qe_pin *qe_pin)
-{
- struct qe_gpio_chip *qe_gc = qe_pin->controller;
- struct qe_pio_regs __iomem *regs = qe_gc->mm_gc.regs;
- struct qe_pio_regs *sregs = &qe_gc->saved_regs;
- int pin = qe_pin->num;
- u32 mask1 = 1 << (QE_PIO_PINS - (pin + 1));
- u32 mask2 = 0x3 << (QE_PIO_PINS - (pin % (QE_PIO_PINS / 2) + 1) * 2);
- bool second_reg = pin > (QE_PIO_PINS / 2) - 1;
- unsigned long flags;
-
- spin_lock_irqsave(&qe_gc->lock, flags);
-
- if (second_reg) {
- clrsetbits_be32(®s->cpdir2, mask2, sregs->cpdir2 & mask2);
- clrsetbits_be32(®s->cppar2, mask2, sregs->cppar2 & mask2);
- } else {
- clrsetbits_be32(®s->cpdir1, mask2, sregs->cpdir1 & mask2);
- clrsetbits_be32(®s->cppar1, mask2, sregs->cppar1 & mask2);
- }
-
- if (sregs->cpdata & mask1)
- qe_gc->cpdata |= mask1;
- else
- qe_gc->cpdata &= ~mask1;
-
- out_be32(®s->cpdata, qe_gc->cpdata);
- clrsetbits_be32(®s->cpodr, mask1, sregs->cpodr & mask1);
-
- spin_unlock_irqrestore(&qe_gc->lock, flags);
-}
-EXPORT_SYMBOL(qe_pin_set_dedicated);
-
-/**
- * qe_pin_set_gpio - Set a pin to the GPIO mode
- * @qe_pin: pointer to the qe_pin structure
- * Context: any
- *
- * This function sets a pin to the GPIO mode.
- */
-void qe_pin_set_gpio(struct qe_pin *qe_pin)
-{
- struct qe_gpio_chip *qe_gc = qe_pin->controller;
- struct qe_pio_regs __iomem *regs = qe_gc->mm_gc.regs;
- unsigned long flags;
-
- spin_lock_irqsave(&qe_gc->lock, flags);
-
- /* Let's make it input by default, GPIO API is able to change that. */
- __par_io_config_pin(regs, qe_pin->num, QE_PIO_DIR_IN, 0, 0, 0);
-
- spin_unlock_irqrestore(&qe_gc->lock, flags);
-}
-EXPORT_SYMBOL(qe_pin_set_gpio);
-
-static int __init qe_add_gpiochips(void)
-{
- struct device_node *np;
-
- for_each_compatible_node(np, NULL, "fsl,mpc8323-qe-pario-bank") {
- int ret;
- struct qe_gpio_chip *qe_gc;
- struct of_mm_gpio_chip *mm_gc;
- struct gpio_chip *gc;
-
- qe_gc = kzalloc(sizeof(*qe_gc), GFP_KERNEL);
- if (!qe_gc) {
- ret = -ENOMEM;
- goto err;
- }
-
- spin_lock_init(&qe_gc->lock);
-
- mm_gc = &qe_gc->mm_gc;
- gc = &mm_gc->gc;
-
- mm_gc->save_regs = qe_gpio_save_regs;
- gc->ngpio = QE_PIO_PINS;
- gc->direction_input = qe_gpio_dir_in;
- gc->direction_output = qe_gpio_dir_out;
- gc->get = qe_gpio_get;
- gc->set = qe_gpio_set;
-
- ret = of_mm_gpiochip_add(np, mm_gc);
- if (ret)
- goto err;
- continue;
-err:
- pr_err("%s: registration failed with status %d\n",
- np->full_name, ret);
- kfree(qe_gc);
- /* try others anyway */
- }
- return 0;
-}
-arch_initcall(qe_add_gpiochips);
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
deleted file mode 100644
index 238a07b..0000000
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ /dev/null
@@ -1,708 +0,0 @@
-/*
- * Copyright (C) 2006-2010 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Authors: Shlomi Gridish <gridish@freescale.com>
- * Li Yang <leoli@freescale.com>
- * Based on cpm2_common.c from Dan Malek (dmalek@jlc.net)
- *
- * Description:
- * General Purpose functions for the global management of the
- * QUICC Engine (QE).
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/spinlock.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/bootmem.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/crc32.h>
-#include <linux/mod_devicetable.h>
-#include <linux/of_platform.h>
-#include <asm/irq.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/immap_qe.h>
-#include <asm/qe.h>
-#include <asm/prom.h>
-#include <asm/rheap.h>
-
-static void qe_snums_init(void);
-static int qe_sdma_init(void);
-
-static DEFINE_SPINLOCK(qe_lock);
-DEFINE_SPINLOCK(cmxgcr_lock);
-EXPORT_SYMBOL(cmxgcr_lock);
-
-/* QE snum state */
-enum qe_snum_state {
- QE_SNUM_STATE_USED,
- QE_SNUM_STATE_FREE
-};
-
-/* QE snum */
-struct qe_snum {
- u8 num;
- enum qe_snum_state state;
-};
-
-/* We allocate this here because it is used almost exclusively for
- * the communication processor devices.
- */
-struct qe_immap __iomem *qe_immr;
-EXPORT_SYMBOL(qe_immr);
-
-static struct qe_snum snums[QE_NUM_OF_SNUM]; /* Dynamically allocated SNUMs */
-static unsigned int qe_num_of_snum;
-
-static phys_addr_t qebase = -1;
-
-phys_addr_t get_qe_base(void)
-{
- struct device_node *qe;
- int size;
- const u32 *prop;
-
- if (qebase != -1)
- return qebase;
-
- qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
- if (!qe) {
- qe = of_find_node_by_type(NULL, "qe");
- if (!qe)
- return qebase;
- }
-
- prop = of_get_property(qe, "reg", &size);
- if (prop && size >= sizeof(*prop))
- qebase = of_translate_address(qe, prop);
- of_node_put(qe);
-
- return qebase;
-}
-
-EXPORT_SYMBOL(get_qe_base);
-
-void qe_reset(void)
-{
- if (qe_immr == NULL)
- qe_immr = ioremap(get_qe_base(), QE_IMMAP_SIZE);
-
- qe_snums_init();
-
- qe_issue_cmd(QE_RESET, QE_CR_SUBBLOCK_INVALID,
- QE_CR_PROTOCOL_UNSPECIFIED, 0);
-
- /* Reclaim the MURAM memory for our use. */
- qe_muram_init();
-
- if (qe_sdma_init())
- panic("sdma init failed!");
-}
-
-int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input)
-{
- unsigned long flags;
- u8 mcn_shift = 0, dev_shift = 0;
- u32 ret;
-
- spin_lock_irqsave(&qe_lock, flags);
- if (cmd == QE_RESET) {
- out_be32(&qe_immr->cp.cecr, (u32) (cmd | QE_CR_FLG));
- } else {
- if (cmd == QE_ASSIGN_PAGE) {
- /* Here device is the SNUM, not sub-block */
- dev_shift = QE_CR_SNUM_SHIFT;
- } else if (cmd == QE_ASSIGN_RISC) {
- /* Here device is the SNUM, and mcnProtocol is
- * e_QeCmdRiscAssignment value */
- dev_shift = QE_CR_SNUM_SHIFT;
- mcn_shift = QE_CR_MCN_RISC_ASSIGN_SHIFT;
- } else {
- if (device == QE_CR_SUBBLOCK_USB)
- mcn_shift = QE_CR_MCN_USB_SHIFT;
- else
- mcn_shift = QE_CR_MCN_NORMAL_SHIFT;
- }
-
- out_be32(&qe_immr->cp.cecdr, cmd_input);
- out_be32(&qe_immr->cp.cecr,
- (cmd | QE_CR_FLG | ((u32) device << dev_shift) | (u32)
- mcn_protocol << mcn_shift));
- }
-
- /* wait for the QE_CR_FLG to clear */
- ret = spin_event_timeout((in_be32(&qe_immr->cp.cecr) & QE_CR_FLG) == 0,
- 100, 0);
- /* On timeout (e.g. failure), the expression will be false (ret == 0),
- otherwise it will be true (ret == 1). */
- spin_unlock_irqrestore(&qe_lock, flags);
-
- return ret == 1;
-}
-EXPORT_SYMBOL(qe_issue_cmd);
-
-/* Set a baud rate generator. This needs lots of work. There are
- * 16 BRGs, which can be connected to the QE channels or output
- * as clocks. The BRGs are in two different block of internal
- * memory mapped space.
- * The BRG clock is the QE clock divided by 2.
- * It was set up long ago during the initial boot phase and is
- * is given to us.
- * Baud rate clocks are zero-based in the driver code (as that maps
- * to port numbers). Documentation uses 1-based numbering.
- */
-static unsigned int brg_clk = 0;
-
-unsigned int qe_get_brg_clk(void)
-{
- struct device_node *qe;
- int size;
- const u32 *prop;
-
- if (brg_clk)
- return brg_clk;
-
- qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
- if (!qe) {
- qe = of_find_node_by_type(NULL, "qe");
- if (!qe)
- return brg_clk;
- }
-
- prop = of_get_property(qe, "brg-frequency", &size);
- if (prop && size == sizeof(*prop))
- brg_clk = *prop;
-
- of_node_put(qe);
-
- return brg_clk;
-}
-EXPORT_SYMBOL(qe_get_brg_clk);
-
-/* Program the BRG to the given sampling rate and multiplier
- *
- * @brg: the BRG, QE_BRG1 - QE_BRG16
- * @rate: the desired sampling rate
- * @multiplier: corresponds to the value programmed in GUMR_L[RDCR] or
- * GUMR_L[TDCR]. E.g., if this BRG is the RX clock, and GUMR_L[RDCR]=01,
- * then 'multiplier' should be 8.
- */
-int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier)
-{
- u32 divisor, tempval;
- u32 div16 = 0;
-
- if ((brg < QE_BRG1) || (brg > QE_BRG16))
- return -EINVAL;
-
- divisor = qe_get_brg_clk() / (rate * multiplier);
-
- if (divisor > QE_BRGC_DIVISOR_MAX + 1) {
- div16 = QE_BRGC_DIV16;
- divisor /= 16;
- }
-
- /* Errata QE_General4, which affects some MPC832x and MPC836x SOCs, says
- that the BRG divisor must be even if you're not using divide-by-16
- mode. */
- if (!div16 && (divisor & 1) && (divisor > 3))
- divisor++;
-
- tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) |
- QE_BRGC_ENABLE | div16;
-
- out_be32(&qe_immr->brg.brgc[brg - QE_BRG1], tempval);
-
- return 0;
-}
-EXPORT_SYMBOL(qe_setbrg);
-
-/* Convert a string to a QE clock source enum
- *
- * This function takes a string, typically from a property in the device
- * tree, and returns the corresponding "enum qe_clock" value.
-*/
-enum qe_clock qe_clock_source(const char *source)
-{
- unsigned int i;
-
- if (strcasecmp(source, "none") == 0)
- return QE_CLK_NONE;
-
- if (strncasecmp(source, "brg", 3) == 0) {
- i = simple_strtoul(source + 3, NULL, 10);
- if ((i >= 1) && (i <= 16))
- return (QE_BRG1 - 1) + i;
- else
- return QE_CLK_DUMMY;
- }
-
- if (strncasecmp(source, "clk", 3) == 0) {
- i = simple_strtoul(source + 3, NULL, 10);
- if ((i >= 1) && (i <= 24))
- return (QE_CLK1 - 1) + i;
- else
- return QE_CLK_DUMMY;
- }
-
- return QE_CLK_DUMMY;
-}
-EXPORT_SYMBOL(qe_clock_source);
-
-/* Initialize SNUMs (thread serial numbers) according to
- * QE Module Control chapter, SNUM table
- */
-static void qe_snums_init(void)
-{
- int i;
- static const u8 snum_init_76[] = {
- 0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D,
- 0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89,
- 0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9,
- 0xD8, 0xD9, 0xE8, 0xE9, 0x44, 0x45, 0x4C, 0x4D,
- 0x54, 0x55, 0x5C, 0x5D, 0x64, 0x65, 0x6C, 0x6D,
- 0x74, 0x75, 0x7C, 0x7D, 0x84, 0x85, 0x8C, 0x8D,
- 0x94, 0x95, 0x9C, 0x9D, 0xA4, 0xA5, 0xAC, 0xAD,
- 0xB4, 0xB5, 0xBC, 0xBD, 0xC4, 0xC5, 0xCC, 0xCD,
- 0xD4, 0xD5, 0xDC, 0xDD, 0xE4, 0xE5, 0xEC, 0xED,
- 0xF4, 0xF5, 0xFC, 0xFD,
- };
- static const u8 snum_init_46[] = {
- 0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D,
- 0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89,
- 0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9,
- 0xD8, 0xD9, 0xE8, 0xE9, 0x08, 0x09, 0x18, 0x19,
- 0x28, 0x29, 0x38, 0x39, 0x48, 0x49, 0x58, 0x59,
- 0x68, 0x69, 0x78, 0x79, 0x80, 0x81,
- };
- static const u8 *snum_init;
-
- qe_num_of_snum = qe_get_num_of_snums();
-
- if (qe_num_of_snum == 76)
- snum_init = snum_init_76;
- else
- snum_init = snum_init_46;
-
- for (i = 0; i < qe_num_of_snum; i++) {
- snums[i].num = snum_init[i];
- snums[i].state = QE_SNUM_STATE_FREE;
- }
-}
-
-int qe_get_snum(void)
-{
- unsigned long flags;
- int snum = -EBUSY;
- int i;
-
- spin_lock_irqsave(&qe_lock, flags);
- for (i = 0; i < qe_num_of_snum; i++) {
- if (snums[i].state == QE_SNUM_STATE_FREE) {
- snums[i].state = QE_SNUM_STATE_USED;
- snum = snums[i].num;
- break;
- }
- }
- spin_unlock_irqrestore(&qe_lock, flags);
-
- return snum;
-}
-EXPORT_SYMBOL(qe_get_snum);
-
-void qe_put_snum(u8 snum)
-{
- int i;
-
- for (i = 0; i < qe_num_of_snum; i++) {
- if (snums[i].num == snum) {
- snums[i].state = QE_SNUM_STATE_FREE;
- break;
- }
- }
-}
-EXPORT_SYMBOL(qe_put_snum);
-
-static int qe_sdma_init(void)
-{
- struct sdma __iomem *sdma = &qe_immr->sdma;
- static unsigned long sdma_buf_offset = (unsigned long)-ENOMEM;
-
- if (!sdma)
- return -ENODEV;
-
- /* allocate 2 internal temporary buffers (512 bytes size each) for
- * the SDMA */
- if (IS_ERR_VALUE(sdma_buf_offset)) {
- sdma_buf_offset = qe_muram_alloc(512 * 2, 4096);
- if (IS_ERR_VALUE(sdma_buf_offset))
- return -ENOMEM;
- }
-
- out_be32(&sdma->sdebcr, (u32) sdma_buf_offset & QE_SDEBCR_BA_MASK);
- out_be32(&sdma->sdmr, (QE_SDMR_GLB_1_MSK |
- (0x1 << QE_SDMR_CEN_SHIFT)));
-
- return 0;
-}
-
-/* The maximum number of RISCs we support */
-#define MAX_QE_RISC 4
-
-/* Firmware information stored here for qe_get_firmware_info() */
-static struct qe_firmware_info qe_firmware_info;
-
-/*
- * Set to 1 if QE firmware has been uploaded, and therefore
- * qe_firmware_info contains valid data.
- */
-static int qe_firmware_uploaded;
-
-/*
- * Upload a QE microcode
- *
- * This function is a worker function for qe_upload_firmware(). It does
- * the actual uploading of the microcode.
- */
-static void qe_upload_microcode(const void *base,
- const struct qe_microcode *ucode)
-{
- const __be32 *code = base + be32_to_cpu(ucode->code_offset);
- unsigned int i;
-
- if (ucode->major || ucode->minor || ucode->revision)
- printk(KERN_INFO "qe-firmware: "
- "uploading microcode '%s' version %u.%u.%u\n",
- ucode->id, ucode->major, ucode->minor, ucode->revision);
- else
- printk(KERN_INFO "qe-firmware: "
- "uploading microcode '%s'\n", ucode->id);
-
- /* Use auto-increment */
- out_be32(&qe_immr->iram.iadd, be32_to_cpu(ucode->iram_offset) |
- QE_IRAM_IADD_AIE | QE_IRAM_IADD_BADDR);
-
- for (i = 0; i < be32_to_cpu(ucode->count); i++)
- out_be32(&qe_immr->iram.idata, be32_to_cpu(code[i]));
-
- /* Set I-RAM Ready Register */
- out_be32(&qe_immr->iram.iready, be32_to_cpu(QE_IRAM_READY));
-}
-
-/*
- * Upload a microcode to the I-RAM at a specific address.
- *
- * See Documentation/powerpc/qe_firmware.txt for information on QE microcode
- * uploading.
- *
- * Currently, only version 1 is supported, so the 'version' field must be
- * set to 1.
- *
- * The SOC model and revision are not validated, they are only displayed for
- * informational purposes.
- *
- * 'calc_size' is the calculated size, in bytes, of the firmware structure and
- * all of the microcode structures, minus the CRC.
- *
- * 'length' is the size that the structure says it is, including the CRC.
- */
-int qe_upload_firmware(const struct qe_firmware *firmware)
-{
- unsigned int i;
- unsigned int j;
- u32 crc;
- size_t calc_size = sizeof(struct qe_firmware);
- size_t length;
- const struct qe_header *hdr;
-
- if (!firmware) {
- printk(KERN_ERR "qe-firmware: invalid pointer\n");
- return -EINVAL;
- }
-
- hdr = &firmware->header;
- length = be32_to_cpu(hdr->length);
-
- /* Check the magic */
- if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') ||
- (hdr->magic[2] != 'F')) {
- printk(KERN_ERR "qe-firmware: not a microcode\n");
- return -EPERM;
- }
-
- /* Check the version */
- if (hdr->version != 1) {
- printk(KERN_ERR "qe-firmware: unsupported version\n");
- return -EPERM;
- }
-
- /* Validate some of the fields */
- if ((firmware->count < 1) || (firmware->count > MAX_QE_RISC)) {
- printk(KERN_ERR "qe-firmware: invalid data\n");
- return -EINVAL;
- }
-
- /* Validate the length and check if there's a CRC */
- calc_size += (firmware->count - 1) * sizeof(struct qe_microcode);
-
- for (i = 0; i < firmware->count; i++)
- /*
- * For situations where the second RISC uses the same microcode
- * as the first, the 'code_offset' and 'count' fields will be
- * zero, so it's okay to add those.
- */
- calc_size += sizeof(__be32) *
- be32_to_cpu(firmware->microcode[i].count);
-
- /* Validate the length */
- if (length != calc_size + sizeof(__be32)) {
- printk(KERN_ERR "qe-firmware: invalid length\n");
- return -EPERM;
- }
-
- /* Validate the CRC */
- crc = be32_to_cpu(*(__be32 *)((void *)firmware + calc_size));
- if (crc != crc32(0, firmware, calc_size)) {
- printk(KERN_ERR "qe-firmware: firmware CRC is invalid\n");
- return -EIO;
- }
-
- /*
- * If the microcode calls for it, split the I-RAM.
- */
- if (!firmware->split)
- setbits16(&qe_immr->cp.cercr, QE_CP_CERCR_CIR);
-
- if (firmware->soc.model)
- printk(KERN_INFO
- "qe-firmware: firmware '%s' for %u V%u.%u\n",
- firmware->id, be16_to_cpu(firmware->soc.model),
- firmware->soc.major, firmware->soc.minor);
- else
- printk(KERN_INFO "qe-firmware: firmware '%s'\n",
- firmware->id);
-
- /*
- * The QE only supports one microcode per RISC, so clear out all the
- * saved microcode information and put in the new.
- */
- memset(&qe_firmware_info, 0, sizeof(qe_firmware_info));
- strcpy(qe_firmware_info.id, firmware->id);
- qe_firmware_info.extended_modes = firmware->extended_modes;
- memcpy(qe_firmware_info.vtraps, firmware->vtraps,
- sizeof(firmware->vtraps));
-
- /* Loop through each microcode. */
- for (i = 0; i < firmware->count; i++) {
- const struct qe_microcode *ucode = &firmware->microcode[i];
-
- /* Upload a microcode if it's present */
- if (ucode->code_offset)
- qe_upload_microcode(firmware, ucode);
-
- /* Program the traps for this processor */
- for (j = 0; j < 16; j++) {
- u32 trap = be32_to_cpu(ucode->traps[j]);
-
- if (trap)
- out_be32(&qe_immr->rsp[i].tibcr[j], trap);
- }
-
- /* Enable traps */
- out_be32(&qe_immr->rsp[i].eccr, be32_to_cpu(ucode->eccr));
- }
-
- qe_firmware_uploaded = 1;
-
- return 0;
-}
-EXPORT_SYMBOL(qe_upload_firmware);
-
-/*
- * Get info on the currently-loaded firmware
- *
- * This function also checks the device tree to see if the boot loader has
- * uploaded a firmware already.
- */
-struct qe_firmware_info *qe_get_firmware_info(void)
-{
- static int initialized;
- struct property *prop;
- struct device_node *qe;
- struct device_node *fw = NULL;
- const char *sprop;
- unsigned int i;
-
- /*
- * If we haven't checked yet, and a driver hasn't uploaded a firmware
- * yet, then check the device tree for information.
- */
- if (qe_firmware_uploaded)
- return &qe_firmware_info;
-
- if (initialized)
- return NULL;
-
- initialized = 1;
-
- /*
- * Newer device trees have an "fsl,qe" compatible property for the QE
- * node, but we still need to support older device trees.
- */
- qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
- if (!qe) {
- qe = of_find_node_by_type(NULL, "qe");
- if (!qe)
- return NULL;
- }
-
- /* Find the 'firmware' child node */
- for_each_child_of_node(qe, fw) {
- if (strcmp(fw->name, "firmware") == 0)
- break;
- }
-
- of_node_put(qe);
-
- /* Did we find the 'firmware' node? */
- if (!fw)
- return NULL;
-
- qe_firmware_uploaded = 1;
-
- /* Copy the data into qe_firmware_info*/
- sprop = of_get_property(fw, "id", NULL);
- if (sprop)
- strncpy(qe_firmware_info.id, sprop,
- sizeof(qe_firmware_info.id) - 1);
-
- prop = of_find_property(fw, "extended-modes", NULL);
- if (prop && (prop->length == sizeof(u64))) {
- const u64 *iprop = prop->value;
-
- qe_firmware_info.extended_modes = *iprop;
- }
-
- prop = of_find_property(fw, "virtual-traps", NULL);
- if (prop && (prop->length == 32)) {
- const u32 *iprop = prop->value;
-
- for (i = 0; i < ARRAY_SIZE(qe_firmware_info.vtraps); i++)
- qe_firmware_info.vtraps[i] = iprop[i];
- }
-
- of_node_put(fw);
-
- return &qe_firmware_info;
-}
-EXPORT_SYMBOL(qe_get_firmware_info);
-
-unsigned int qe_get_num_of_risc(void)
-{
- struct device_node *qe;
- int size;
- unsigned int num_of_risc = 0;
- const u32 *prop;
-
- qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
- if (!qe) {
- /* Older devices trees did not have an "fsl,qe"
- * compatible property, so we need to look for
- * the QE node by name.
- */
- qe = of_find_node_by_type(NULL, "qe");
- if (!qe)
- return num_of_risc;
- }
-
- prop = of_get_property(qe, "fsl,qe-num-riscs", &size);
- if (prop && size == sizeof(*prop))
- num_of_risc = *prop;
-
- of_node_put(qe);
-
- return num_of_risc;
-}
-EXPORT_SYMBOL(qe_get_num_of_risc);
-
-unsigned int qe_get_num_of_snums(void)
-{
- struct device_node *qe;
- int size;
- unsigned int num_of_snums;
- const u32 *prop;
-
- num_of_snums = 28; /* The default number of snum for threads is 28 */
- qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
- if (!qe) {
- /* Older devices trees did not have an "fsl,qe"
- * compatible property, so we need to look for
- * the QE node by name.
- */
- qe = of_find_node_by_type(NULL, "qe");
- if (!qe)
- return num_of_snums;
- }
-
- prop = of_get_property(qe, "fsl,qe-num-snums", &size);
- if (prop && size == sizeof(*prop)) {
- num_of_snums = *prop;
- if ((num_of_snums < 28) || (num_of_snums > QE_NUM_OF_SNUM)) {
- /* No QE ever has fewer than 28 SNUMs */
- pr_err("QE: number of snum is invalid\n");
- of_node_put(qe);
- return -EINVAL;
- }
- }
-
- of_node_put(qe);
-
- return num_of_snums;
-}
-EXPORT_SYMBOL(qe_get_num_of_snums);
-
-#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx)
-static int qe_resume(struct platform_device *ofdev)
-{
- if (!qe_alive_during_sleep())
- qe_reset();
- return 0;
-}
-
-static int qe_probe(struct platform_device *ofdev)
-{
- return 0;
-}
-
-static const struct of_device_id qe_ids[] = {
- { .compatible = "fsl,qe", },
- { },
-};
-
-static struct platform_driver qe_driver = {
- .driver = {
- .name = "fsl-qe",
- .owner = THIS_MODULE,
- .of_match_table = qe_ids,
- },
- .probe = qe_probe,
- .resume = qe_resume,
-};
-
-static int __init qe_drv_init(void)
-{
- return platform_driver_register(&qe_driver);
-}
-device_initcall(qe_drv_init);
-#endif /* defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx) */
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c
deleted file mode 100644
index b2b87c3..0000000
--- a/arch/powerpc/sysdev/qe_lib/qe_ic.c
+++ /dev/null
@@ -1,501 +0,0 @@
-/*
- * arch/powerpc/sysdev/qe_lib/qe_ic.c
- *
- * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Author: Li Yang <leoli@freescale.com>
- * Based on code from Shlomi Gridish <gridish@freescale.com>
- *
- * QUICC ENGINE Interrupt Controller
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/slab.h>
-#include <linux/stddef.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/device.h>
-#include <linux/bootmem.h>
-#include <linux/spinlock.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/qe_ic.h>
-
-#include "qe_ic.h"
-
-static DEFINE_RAW_SPINLOCK(qe_ic_lock);
-
-static struct qe_ic_info qe_ic_info[] = {
- [1] = {
- .mask = 0x00008000,
- .mask_reg = QEIC_CIMR,
- .pri_code = 0,
- .pri_reg = QEIC_CIPWCC,
- },
- [2] = {
- .mask = 0x00004000,
- .mask_reg = QEIC_CIMR,
- .pri_code = 1,
- .pri_reg = QEIC_CIPWCC,
- },
- [3] = {
- .mask = 0x00002000,
- .mask_reg = QEIC_CIMR,
- .pri_code = 2,
- .pri_reg = QEIC_CIPWCC,
- },
- [10] = {
- .mask = 0x00000040,
- .mask_reg = QEIC_CIMR,
- .pri_code = 1,
- .pri_reg = QEIC_CIPZCC,
- },
- [11] = {
- .mask = 0x00000020,
- .mask_reg = QEIC_CIMR,
- .pri_code = 2,
- .pri_reg = QEIC_CIPZCC,
- },
- [12] = {
- .mask = 0x00000010,
- .mask_reg = QEIC_CIMR,
- .pri_code = 3,
- .pri_reg = QEIC_CIPZCC,
- },
- [13] = {
- .mask = 0x00000008,
- .mask_reg = QEIC_CIMR,
- .pri_code = 4,
- .pri_reg = QEIC_CIPZCC,
- },
- [14] = {
- .mask = 0x00000004,
- .mask_reg = QEIC_CIMR,
- .pri_code = 5,
- .pri_reg = QEIC_CIPZCC,
- },
- [15] = {
- .mask = 0x00000002,
- .mask_reg = QEIC_CIMR,
- .pri_code = 6,
- .pri_reg = QEIC_CIPZCC,
- },
- [20] = {
- .mask = 0x10000000,
- .mask_reg = QEIC_CRIMR,
- .pri_code = 3,
- .pri_reg = QEIC_CIPRTA,
- },
- [25] = {
- .mask = 0x00800000,
- .mask_reg = QEIC_CRIMR,
- .pri_code = 0,
- .pri_reg = QEIC_CIPRTB,
- },
- [26] = {
- .mask = 0x00400000,
- .mask_reg = QEIC_CRIMR,
- .pri_code = 1,
- .pri_reg = QEIC_CIPRTB,
- },
- [27] = {
- .mask = 0x00200000,
- .mask_reg = QEIC_CRIMR,
- .pri_code = 2,
- .pri_reg = QEIC_CIPRTB,
- },
- [28] = {
- .mask = 0x00100000,
- .mask_reg = QEIC_CRIMR,
- .pri_code = 3,
- .pri_reg = QEIC_CIPRTB,
- },
- [32] = {
- .mask = 0x80000000,
- .mask_reg = QEIC_CIMR,
- .pri_code = 0,
- .pri_reg = QEIC_CIPXCC,
- },
- [33] = {
- .mask = 0x40000000,
- .mask_reg = QEIC_CIMR,
- .pri_code = 1,
- .pri_reg = QEIC_CIPXCC,
- },
- [34] = {
- .mask = 0x20000000,
- .mask_reg = QEIC_CIMR,
- .pri_code = 2,
- .pri_reg = QEIC_CIPXCC,
- },
- [35] = {
- .mask = 0x10000000,
- .mask_reg = QEIC_CIMR,
- .pri_code = 3,
- .pri_reg = QEIC_CIPXCC,
- },
- [36] = {
- .mask = 0x08000000,
- .mask_reg = QEIC_CIMR,
- .pri_code = 4,
- .pri_reg = QEIC_CIPXCC,
- },
- [40] = {
- .mask = 0x00800000,
- .mask_reg = QEIC_CIMR,
- .pri_code = 0,
- .pri_reg = QEIC_CIPYCC,
- },
- [41] = {
- .mask = 0x00400000,
- .mask_reg = QEIC_CIMR,
- .pri_code = 1,
- .pri_reg = QEIC_CIPYCC,
- },
- [42] = {
- .mask = 0x00200000,
- .mask_reg = QEIC_CIMR,
- .pri_code = 2,
- .pri_reg = QEIC_CIPYCC,
- },
- [43] = {
- .mask = 0x00100000,
- .mask_reg = QEIC_CIMR,
- .pri_code = 3,
- .pri_reg = QEIC_CIPYCC,
- },
-};
-
-static inline u32 qe_ic_read(volatile __be32 __iomem * base, unsigned int reg)
-{
- return in_be32(base + (reg >> 2));
-}
-
-static inline void qe_ic_write(volatile __be32 __iomem * base, unsigned int reg,
- u32 value)
-{
- out_be32(base + (reg >> 2), value);
-}
-
-static inline struct qe_ic *qe_ic_from_irq(unsigned int virq)
-{
- return irq_get_chip_data(virq);
-}
-
-static inline struct qe_ic *qe_ic_from_irq_data(struct irq_data *d)
-{
- return irq_data_get_irq_chip_data(d);
-}
-
-static void qe_ic_unmask_irq(struct irq_data *d)
-{
- struct qe_ic *qe_ic = qe_ic_from_irq_data(d);
- unsigned int src = irqd_to_hwirq(d);
- unsigned long flags;
- u32 temp;
-
- raw_spin_lock_irqsave(&qe_ic_lock, flags);
-
- temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
- qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
- temp | qe_ic_info[src].mask);
-
- raw_spin_unlock_irqrestore(&qe_ic_lock, flags);
-}
-
-static void qe_ic_mask_irq(struct irq_data *d)
-{
- struct qe_ic *qe_ic = qe_ic_from_irq_data(d);
- unsigned int src = irqd_to_hwirq(d);
- unsigned long flags;
- u32 temp;
-
- raw_spin_lock_irqsave(&qe_ic_lock, flags);
-
- temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
- qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
- temp & ~qe_ic_info[src].mask);
-
- /* Flush the above write before enabling interrupts; otherwise,
- * spurious interrupts will sometimes happen. To be 100% sure
- * that the write has reached the device before interrupts are
- * enabled, the mask register would have to be read back; however,
- * this is not required for correctness, only to avoid wasting
- * time on a large number of spurious interrupts. In testing,
- * a sync reduced the observed spurious interrupts to zero.
- */
- mb();
-
- raw_spin_unlock_irqrestore(&qe_ic_lock, flags);
-}
-
-static struct irq_chip qe_ic_irq_chip = {
- .name = "QEIC",
- .irq_unmask = qe_ic_unmask_irq,
- .irq_mask = qe_ic_mask_irq,
- .irq_mask_ack = qe_ic_mask_irq,
-};
-
-static int qe_ic_host_match(struct irq_domain *h, struct device_node *node)
-{
- /* Exact match, unless qe_ic node is NULL */
- return h->of_node == NULL || h->of_node == node;
-}
-
-static int qe_ic_host_map(struct irq_domain *h, unsigned int virq,
- irq_hw_number_t hw)
-{
- struct qe_ic *qe_ic = h->host_data;
- struct irq_chip *chip;
-
- if (qe_ic_info[hw].mask == 0) {
- printk(KERN_ERR "Can't map reserved IRQ\n");
- return -EINVAL;
- }
- /* Default chip */
- chip = &qe_ic->hc_irq;
-
- irq_set_chip_data(virq, qe_ic);
- irq_set_status_flags(virq, IRQ_LEVEL);
-
- irq_set_chip_and_handler(virq, chip, handle_level_irq);
-
- return 0;
-}
-
-static struct irq_domain_ops qe_ic_host_ops = {
- .match = qe_ic_host_match,
- .map = qe_ic_host_map,
- .xlate = irq_domain_xlate_onetwocell,
-};
-
-/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
-unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic)
-{
- int irq;
-
- BUG_ON(qe_ic == NULL);
-
- /* get the interrupt source vector. */
- irq = qe_ic_read(qe_ic->regs, QEIC_CIVEC) >> 26;
-
- if (irq == 0)
- return NO_IRQ;
-
- return irq_linear_revmap(qe_ic->irqhost, irq);
-}
-
-/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
-unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic)
-{
- int irq;
-
- BUG_ON(qe_ic == NULL);
-
- /* get the interrupt source vector. */
- irq = qe_ic_read(qe_ic->regs, QEIC_CHIVEC) >> 26;
-
- if (irq == 0)
- return NO_IRQ;
-
- return irq_linear_revmap(qe_ic->irqhost, irq);
-}
-
-void __init qe_ic_init(struct device_node *node, unsigned int flags,
- void (*low_handler)(unsigned int irq, struct irq_desc *desc),
- void (*high_handler)(unsigned int irq, struct irq_desc *desc))
-{
- struct qe_ic *qe_ic;
- struct resource res;
- u32 temp = 0, ret, high_active = 0;
-
- ret = of_address_to_resource(node, 0, &res);
- if (ret)
- return;
-
- qe_ic = kzalloc(sizeof(*qe_ic), GFP_KERNEL);
- if (qe_ic == NULL)
- return;
-
- qe_ic->irqhost = irq_domain_add_linear(node, NR_QE_IC_INTS,
- &qe_ic_host_ops, qe_ic);
- if (qe_ic->irqhost == NULL) {
- kfree(qe_ic);
- return;
- }
-
- qe_ic->regs = ioremap(res.start, resource_size(&res));
-
- qe_ic->hc_irq = qe_ic_irq_chip;
-
- qe_ic->virq_high = irq_of_parse_and_map(node, 0);
- qe_ic->virq_low = irq_of_parse_and_map(node, 1);
-
- if (qe_ic->virq_low == NO_IRQ) {
- printk(KERN_ERR "Failed to map QE_IC low IRQ\n");
- kfree(qe_ic);
- return;
- }
-
- /* default priority scheme is grouped. If spread mode is */
- /* required, configure cicr accordingly. */
- if (flags & QE_IC_SPREADMODE_GRP_W)
- temp |= CICR_GWCC;
- if (flags & QE_IC_SPREADMODE_GRP_X)
- temp |= CICR_GXCC;
- if (flags & QE_IC_SPREADMODE_GRP_Y)
- temp |= CICR_GYCC;
- if (flags & QE_IC_SPREADMODE_GRP_Z)
- temp |= CICR_GZCC;
- if (flags & QE_IC_SPREADMODE_GRP_RISCA)
- temp |= CICR_GRTA;
- if (flags & QE_IC_SPREADMODE_GRP_RISCB)
- temp |= CICR_GRTB;
-
- /* choose destination signal for highest priority interrupt */
- if (flags & QE_IC_HIGH_SIGNAL) {
- temp |= (SIGNAL_HIGH << CICR_HPIT_SHIFT);
- high_active = 1;
- }
-
- qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
-
- irq_set_handler_data(qe_ic->virq_low, qe_ic);
- irq_set_chained_handler(qe_ic->virq_low, low_handler);
-
- if (qe_ic->virq_high != NO_IRQ &&
- qe_ic->virq_high != qe_ic->virq_low) {
- irq_set_handler_data(qe_ic->virq_high, qe_ic);
- irq_set_chained_handler(qe_ic->virq_high, high_handler);
- }
-}
-
-void qe_ic_set_highest_priority(unsigned int virq, int high)
-{
- struct qe_ic *qe_ic = qe_ic_from_irq(virq);
- unsigned int src = virq_to_hw(virq);
- u32 temp = 0;
-
- temp = qe_ic_read(qe_ic->regs, QEIC_CICR);
-
- temp &= ~CICR_HP_MASK;
- temp |= src << CICR_HP_SHIFT;
-
- temp &= ~CICR_HPIT_MASK;
- temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << CICR_HPIT_SHIFT;
-
- qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
-}
-
-/* Set Priority level within its group, from 1 to 8 */
-int qe_ic_set_priority(unsigned int virq, unsigned int priority)
-{
- struct qe_ic *qe_ic = qe_ic_from_irq(virq);
- unsigned int src = virq_to_hw(virq);
- u32 temp;
-
- if (priority > 8 || priority == 0)
- return -EINVAL;
- if (src > 127)
- return -EINVAL;
- if (qe_ic_info[src].pri_reg == 0)
- return -EINVAL;
-
- temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].pri_reg);
-
- if (priority < 4) {
- temp &= ~(0x7 << (32 - priority * 3));
- temp |= qe_ic_info[src].pri_code << (32 - priority * 3);
- } else {
- temp &= ~(0x7 << (24 - priority * 3));
- temp |= qe_ic_info[src].pri_code << (24 - priority * 3);
- }
-
- qe_ic_write(qe_ic->regs, qe_ic_info[src].pri_reg, temp);
-
- return 0;
-}
-
-/* Set a QE priority to use high irq, only priority 1~2 can use high irq */
-int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high)
-{
- struct qe_ic *qe_ic = qe_ic_from_irq(virq);
- unsigned int src = virq_to_hw(virq);
- u32 temp, control_reg = QEIC_CICNR, shift = 0;
-
- if (priority > 2 || priority == 0)
- return -EINVAL;
-
- switch (qe_ic_info[src].pri_reg) {
- case QEIC_CIPZCC:
- shift = CICNR_ZCC1T_SHIFT;
- break;
- case QEIC_CIPWCC:
- shift = CICNR_WCC1T_SHIFT;
- break;
- case QEIC_CIPYCC:
- shift = CICNR_YCC1T_SHIFT;
- break;
- case QEIC_CIPXCC:
- shift = CICNR_XCC1T_SHIFT;
- break;
- case QEIC_CIPRTA:
- shift = CRICR_RTA1T_SHIFT;
- control_reg = QEIC_CRICR;
- break;
- case QEIC_CIPRTB:
- shift = CRICR_RTB1T_SHIFT;
- control_reg = QEIC_CRICR;
- break;
- default:
- return -EINVAL;
- }
-
- shift += (2 - priority) * 2;
- temp = qe_ic_read(qe_ic->regs, control_reg);
- temp &= ~(SIGNAL_MASK << shift);
- temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << shift;
- qe_ic_write(qe_ic->regs, control_reg, temp);
-
- return 0;
-}
-
-static struct bus_type qe_ic_subsys = {
- .name = "qe_ic",
- .dev_name = "qe_ic",
-};
-
-static struct device device_qe_ic = {
- .id = 0,
- .bus = &qe_ic_subsys,
-};
-
-static int __init init_qe_ic_sysfs(void)
-{
- int rc;
-
- printk(KERN_DEBUG "Registering qe_ic with sysfs...\n");
-
- rc = subsys_system_register(&qe_ic_subsys, NULL);
- if (rc) {
- printk(KERN_ERR "Failed registering qe_ic sys class\n");
- return -ENODEV;
- }
- rc = device_register(&device_qe_ic);
- if (rc) {
- printk(KERN_ERR "Failed registering qe_ic sys device\n");
- return -ENODEV;
- }
- return 0;
-}
-
-subsys_initcall(init_qe_ic_sysfs);
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.h b/arch/powerpc/sysdev/qe_lib/qe_ic.h
deleted file mode 100644
index efef7ab..0000000
--- a/arch/powerpc/sysdev/qe_lib/qe_ic.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * arch/powerpc/sysdev/qe_lib/qe_ic.h
- *
- * QUICC ENGINE Interrupt Controller Header
- *
- * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Author: Li Yang <leoli@freescale.com>
- * Based on code from Shlomi Gridish <gridish@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#ifndef _POWERPC_SYSDEV_QE_IC_H
-#define _POWERPC_SYSDEV_QE_IC_H
-
-#include <asm/qe_ic.h>
-
-#define NR_QE_IC_INTS 64
-
-/* QE IC registers offset */
-#define QEIC_CICR 0x00
-#define QEIC_CIVEC 0x04
-#define QEIC_CRIPNR 0x08
-#define QEIC_CIPNR 0x0c
-#define QEIC_CIPXCC 0x10
-#define QEIC_CIPYCC 0x14
-#define QEIC_CIPWCC 0x18
-#define QEIC_CIPZCC 0x1c
-#define QEIC_CIMR 0x20
-#define QEIC_CRIMR 0x24
-#define QEIC_CICNR 0x28
-#define QEIC_CIPRTA 0x30
-#define QEIC_CIPRTB 0x34
-#define QEIC_CRICR 0x3c
-#define QEIC_CHIVEC 0x60
-
-/* Interrupt priority registers */
-#define CIPCC_SHIFT_PRI0 29
-#define CIPCC_SHIFT_PRI1 26
-#define CIPCC_SHIFT_PRI2 23
-#define CIPCC_SHIFT_PRI3 20
-#define CIPCC_SHIFT_PRI4 13
-#define CIPCC_SHIFT_PRI5 10
-#define CIPCC_SHIFT_PRI6 7
-#define CIPCC_SHIFT_PRI7 4
-
-/* CICR priority modes */
-#define CICR_GWCC 0x00040000
-#define CICR_GXCC 0x00020000
-#define CICR_GYCC 0x00010000
-#define CICR_GZCC 0x00080000
-#define CICR_GRTA 0x00200000
-#define CICR_GRTB 0x00400000
-#define CICR_HPIT_SHIFT 8
-#define CICR_HPIT_MASK 0x00000300
-#define CICR_HP_SHIFT 24
-#define CICR_HP_MASK 0x3f000000
-
-/* CICNR */
-#define CICNR_WCC1T_SHIFT 20
-#define CICNR_ZCC1T_SHIFT 28
-#define CICNR_YCC1T_SHIFT 12
-#define CICNR_XCC1T_SHIFT 4
-
-/* CRICR */
-#define CRICR_RTA1T_SHIFT 20
-#define CRICR_RTB1T_SHIFT 28
-
-/* Signal indicator */
-#define SIGNAL_MASK 3
-#define SIGNAL_HIGH 2
-#define SIGNAL_LOW 0
-
-struct qe_ic {
- /* Control registers offset */
- volatile u32 __iomem *regs;
-
- /* The remapper for this QEIC */
- struct irq_domain *irqhost;
-
- /* The "linux" controller struct */
- struct irq_chip hc_irq;
-
- /* VIRQ numbers of QE high/low irqs */
- unsigned int virq_high;
- unsigned int virq_low;
-};
-
-/*
- * QE interrupt controller internal structure
- */
-struct qe_ic_info {
- u32 mask; /* location of this source at the QIMR register. */
- u32 mask_reg; /* Mask register offset */
- u8 pri_code; /* for grouped interrupts sources - the interrupt
- code as appears at the group priority register */
- u32 pri_reg; /* Group priority register offset */
-};
-
-#endif /* _POWERPC_SYSDEV_QE_IC_H */
diff --git a/arch/powerpc/sysdev/qe_lib/qe_io.c b/arch/powerpc/sysdev/qe_lib/qe_io.c
deleted file mode 100644
index a88807b..0000000
--- a/arch/powerpc/sysdev/qe_lib/qe_io.c
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * arch/powerpc/sysdev/qe_lib/qe_io.c
- *
- * QE Parallel I/O ports configuration routines
- *
- * Copyright 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Author: Li Yang <LeoLi@freescale.com>
- * Based on code from Shlomi Gridish <gridish@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/ioport.h>
-
-#include <asm/io.h>
-#include <asm/qe.h>
-#include <asm/prom.h>
-#include <sysdev/fsl_soc.h>
-
-#undef DEBUG
-
-static struct qe_pio_regs __iomem *par_io;
-static int num_par_io_ports = 0;
-
-int par_io_init(struct device_node *np)
-{
- struct resource res;
- int ret;
- const u32 *num_ports;
-
- /* Map Parallel I/O ports registers */
- ret = of_address_to_resource(np, 0, &res);
- if (ret)
- return ret;
- par_io = ioremap(res.start, resource_size(&res));
-
- num_ports = of_get_property(np, "num-ports", NULL);
- if (num_ports)
- num_par_io_ports = *num_ports;
-
- return 0;
-}
-
-void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin, int dir,
- int open_drain, int assignment, int has_irq)
-{
- u32 pin_mask1bit;
- u32 pin_mask2bits;
- u32 new_mask2bits;
- u32 tmp_val;
-
- /* calculate pin location for single and 2 bits information */
- pin_mask1bit = (u32) (1 << (QE_PIO_PINS - (pin + 1)));
-
- /* Set open drain, if required */
- tmp_val = in_be32(&par_io->cpodr);
- if (open_drain)
- out_be32(&par_io->cpodr, pin_mask1bit | tmp_val);
- else
- out_be32(&par_io->cpodr, ~pin_mask1bit & tmp_val);
-
- /* define direction */
- tmp_val = (pin > (QE_PIO_PINS / 2) - 1) ?
- in_be32(&par_io->cpdir2) :
- in_be32(&par_io->cpdir1);
-
- /* get all bits mask for 2 bit per port */
- pin_mask2bits = (u32) (0x3 << (QE_PIO_PINS -
- (pin % (QE_PIO_PINS / 2) + 1) * 2));
-
- /* Get the final mask we need for the right definition */
- new_mask2bits = (u32) (dir << (QE_PIO_PINS -
- (pin % (QE_PIO_PINS / 2) + 1) * 2));
-
- /* clear and set 2 bits mask */
- if (pin > (QE_PIO_PINS / 2) - 1) {
- out_be32(&par_io->cpdir2,
- ~pin_mask2bits & tmp_val);
- tmp_val &= ~pin_mask2bits;
- out_be32(&par_io->cpdir2, new_mask2bits | tmp_val);
- } else {
- out_be32(&par_io->cpdir1,
- ~pin_mask2bits & tmp_val);
- tmp_val &= ~pin_mask2bits;
- out_be32(&par_io->cpdir1, new_mask2bits | tmp_val);
- }
- /* define pin assignment */
- tmp_val = (pin > (QE_PIO_PINS / 2) - 1) ?
- in_be32(&par_io->cppar2) :
- in_be32(&par_io->cppar1);
-
- new_mask2bits = (u32) (assignment << (QE_PIO_PINS -
- (pin % (QE_PIO_PINS / 2) + 1) * 2));
- /* clear and set 2 bits mask */
- if (pin > (QE_PIO_PINS / 2) - 1) {
- out_be32(&par_io->cppar2,
- ~pin_mask2bits & tmp_val);
- tmp_val &= ~pin_mask2bits;
- out_be32(&par_io->cppar2, new_mask2bits | tmp_val);
- } else {
- out_be32(&par_io->cppar1,
- ~pin_mask2bits & tmp_val);
- tmp_val &= ~pin_mask2bits;
- out_be32(&par_io->cppar1, new_mask2bits | tmp_val);
- }
-}
-EXPORT_SYMBOL(__par_io_config_pin);
-
-int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
- int assignment, int has_irq)
-{
- if (!par_io || port >= num_par_io_ports)
- return -EINVAL;
-
- __par_io_config_pin(&par_io[port], pin, dir, open_drain, assignment,
- has_irq);
- return 0;
-}
-EXPORT_SYMBOL(par_io_config_pin);
-
-int par_io_data_set(u8 port, u8 pin, u8 val)
-{
- u32 pin_mask, tmp_val;
-
- if (port >= num_par_io_ports)
- return -EINVAL;
- if (pin >= QE_PIO_PINS)
- return -EINVAL;
- /* calculate pin location */
- pin_mask = (u32) (1 << (QE_PIO_PINS - 1 - pin));
-
- tmp_val = in_be32(&par_io[port].cpdata);
-
- if (val == 0) /* clear */
- out_be32(&par_io[port].cpdata, ~pin_mask & tmp_val);
- else /* set */
- out_be32(&par_io[port].cpdata, pin_mask | tmp_val);
-
- return 0;
-}
-EXPORT_SYMBOL(par_io_data_set);
-
-int par_io_of_config(struct device_node *np)
-{
- struct device_node *pio;
- const phandle *ph;
- int pio_map_len;
- const unsigned int *pio_map;
-
- if (par_io == NULL) {
- printk(KERN_ERR "par_io not initialized\n");
- return -1;
- }
-
- ph = of_get_property(np, "pio-handle", NULL);
- if (ph == NULL) {
- printk(KERN_ERR "pio-handle not available\n");
- return -1;
- }
-
- pio = of_find_node_by_phandle(*ph);
-
- pio_map = of_get_property(pio, "pio-map", &pio_map_len);
- if (pio_map == NULL) {
- printk(KERN_ERR "pio-map is not set!\n");
- return -1;
- }
- pio_map_len /= sizeof(unsigned int);
- if ((pio_map_len % 6) != 0) {
- printk(KERN_ERR "pio-map format wrong!\n");
- return -1;
- }
-
- while (pio_map_len > 0) {
- par_io_config_pin((u8) pio_map[0], (u8) pio_map[1],
- (int) pio_map[2], (int) pio_map[3],
- (int) pio_map[4], (int) pio_map[5]);
- pio_map += 6;
- pio_map_len -= 6;
- }
- of_node_put(pio);
- return 0;
-}
-EXPORT_SYMBOL(par_io_of_config);
-
-#ifdef DEBUG
-static void dump_par_io(void)
-{
- unsigned int i;
-
- printk(KERN_INFO "%s: par_io=%p\n", __func__, par_io);
- for (i = 0; i < num_par_io_ports; i++) {
- printk(KERN_INFO " cpodr[%u]=%08x\n", i,
- in_be32(&par_io[i].cpodr));
- printk(KERN_INFO " cpdata[%u]=%08x\n", i,
- in_be32(&par_io[i].cpdata));
- printk(KERN_INFO " cpdir1[%u]=%08x\n", i,
- in_be32(&par_io[i].cpdir1));
- printk(KERN_INFO " cpdir2[%u]=%08x\n", i,
- in_be32(&par_io[i].cpdir2));
- printk(KERN_INFO " cppar1[%u]=%08x\n", i,
- in_be32(&par_io[i].cppar1));
- printk(KERN_INFO " cppar2[%u]=%08x\n", i,
- in_be32(&par_io[i].cppar2));
- }
-
-}
-EXPORT_SYMBOL(dump_par_io);
-#endif /* DEBUG */
diff --git a/arch/powerpc/sysdev/qe_lib/ucc.c b/arch/powerpc/sysdev/qe_lib/ucc.c
deleted file mode 100644
index 134b07d..0000000
--- a/arch/powerpc/sysdev/qe_lib/ucc.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- * arch/powerpc/sysdev/qe_lib/ucc.c
- *
- * QE UCC API Set - UCC specific routines implementations.
- *
- * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Authors: Shlomi Gridish <gridish@freescale.com>
- * Li Yang <leoli@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/stddef.h>
-#include <linux/spinlock.h>
-#include <linux/export.h>
-
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/immap_qe.h>
-#include <asm/qe.h>
-#include <asm/ucc.h>
-
-int ucc_set_qe_mux_mii_mng(unsigned int ucc_num)
-{
- unsigned long flags;
-
- if (ucc_num > UCC_MAX_NUM - 1)
- return -EINVAL;
-
- spin_lock_irqsave(&cmxgcr_lock, flags);
- clrsetbits_be32(&qe_immr->qmx.cmxgcr, QE_CMXGCR_MII_ENET_MNG,
- ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT);
- spin_unlock_irqrestore(&cmxgcr_lock, flags);
-
- return 0;
-}
-EXPORT_SYMBOL(ucc_set_qe_mux_mii_mng);
-
-/* Configure the UCC to either Slow or Fast.
- *
- * A given UCC can be figured to support either "slow" devices (e.g. UART)
- * or "fast" devices (e.g. Ethernet).
- *
- * 'ucc_num' is the UCC number, from 0 - 7.
- *
- * This function also sets the UCC_GUEMR_SET_RESERVED3 bit because that bit
- * must always be set to 1.
- */
-int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed)
-{
- u8 __iomem *guemr;
-
- /* The GUEMR register is at the same location for both slow and fast
- devices, so we just use uccX.slow.guemr. */
- switch (ucc_num) {
- case 0: guemr = &qe_immr->ucc1.slow.guemr;
- break;
- case 1: guemr = &qe_immr->ucc2.slow.guemr;
- break;
- case 2: guemr = &qe_immr->ucc3.slow.guemr;
- break;
- case 3: guemr = &qe_immr->ucc4.slow.guemr;
- break;
- case 4: guemr = &qe_immr->ucc5.slow.guemr;
- break;
- case 5: guemr = &qe_immr->ucc6.slow.guemr;
- break;
- case 6: guemr = &qe_immr->ucc7.slow.guemr;
- break;
- case 7: guemr = &qe_immr->ucc8.slow.guemr;
- break;
- default:
- return -EINVAL;
- }
-
- clrsetbits_8(guemr, UCC_GUEMR_MODE_MASK,
- UCC_GUEMR_SET_RESERVED3 | speed);
-
- return 0;
-}
-
-static void get_cmxucr_reg(unsigned int ucc_num, __be32 __iomem **cmxucr,
- unsigned int *reg_num, unsigned int *shift)
-{
- unsigned int cmx = ((ucc_num & 1) << 1) + (ucc_num > 3);
-
- *reg_num = cmx + 1;
- *cmxucr = &qe_immr->qmx.cmxucr[cmx];
- *shift = 16 - 8 * (ucc_num & 2);
-}
-
-int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask)
-{
- __be32 __iomem *cmxucr;
- unsigned int reg_num;
- unsigned int shift;
-
- /* check if the UCC number is in range. */
- if (ucc_num > UCC_MAX_NUM - 1)
- return -EINVAL;
-
- get_cmxucr_reg(ucc_num, &cmxucr, ®_num, &shift);
-
- if (set)
- setbits32(cmxucr, mask << shift);
- else
- clrbits32(cmxucr, mask << shift);
-
- return 0;
-}
-
-int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock,
- enum comm_dir mode)
-{
- __be32 __iomem *cmxucr;
- unsigned int reg_num;
- unsigned int shift;
- u32 clock_bits = 0;
-
- /* check if the UCC number is in range. */
- if (ucc_num > UCC_MAX_NUM - 1)
- return -EINVAL;
-
- /* The communications direction must be RX or TX */
- if (!((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX)))
- return -EINVAL;
-
- get_cmxucr_reg(ucc_num, &cmxucr, ®_num, &shift);
-
- switch (reg_num) {
- case 1:
- switch (clock) {
- case QE_BRG1: clock_bits = 1; break;
- case QE_BRG2: clock_bits = 2; break;
- case QE_BRG7: clock_bits = 3; break;
- case QE_BRG8: clock_bits = 4; break;
- case QE_CLK9: clock_bits = 5; break;
- case QE_CLK10: clock_bits = 6; break;
- case QE_CLK11: clock_bits = 7; break;
- case QE_CLK12: clock_bits = 8; break;
- case QE_CLK15: clock_bits = 9; break;
- case QE_CLK16: clock_bits = 10; break;
- default: break;
- }
- break;
- case 2:
- switch (clock) {
- case QE_BRG5: clock_bits = 1; break;
- case QE_BRG6: clock_bits = 2; break;
- case QE_BRG7: clock_bits = 3; break;
- case QE_BRG8: clock_bits = 4; break;
- case QE_CLK13: clock_bits = 5; break;
- case QE_CLK14: clock_bits = 6; break;
- case QE_CLK19: clock_bits = 7; break;
- case QE_CLK20: clock_bits = 8; break;
- case QE_CLK15: clock_bits = 9; break;
- case QE_CLK16: clock_bits = 10; break;
- default: break;
- }
- break;
- case 3:
- switch (clock) {
- case QE_BRG9: clock_bits = 1; break;
- case QE_BRG10: clock_bits = 2; break;
- case QE_BRG15: clock_bits = 3; break;
- case QE_BRG16: clock_bits = 4; break;
- case QE_CLK3: clock_bits = 5; break;
- case QE_CLK4: clock_bits = 6; break;
- case QE_CLK17: clock_bits = 7; break;
- case QE_CLK18: clock_bits = 8; break;
- case QE_CLK7: clock_bits = 9; break;
- case QE_CLK8: clock_bits = 10; break;
- case QE_CLK16: clock_bits = 11; break;
- default: break;
- }
- break;
- case 4:
- switch (clock) {
- case QE_BRG13: clock_bits = 1; break;
- case QE_BRG14: clock_bits = 2; break;
- case QE_BRG15: clock_bits = 3; break;
- case QE_BRG16: clock_bits = 4; break;
- case QE_CLK5: clock_bits = 5; break;
- case QE_CLK6: clock_bits = 6; break;
- case QE_CLK21: clock_bits = 7; break;
- case QE_CLK22: clock_bits = 8; break;
- case QE_CLK7: clock_bits = 9; break;
- case QE_CLK8: clock_bits = 10; break;
- case QE_CLK16: clock_bits = 11; break;
- default: break;
- }
- break;
- default: break;
- }
-
- /* Check for invalid combination of clock and UCC number */
- if (!clock_bits)
- return -ENOENT;
-
- if (mode == COMM_DIR_RX)
- shift += 4;
-
- clrsetbits_be32(cmxucr, QE_CMXUCR_TX_CLK_SRC_MASK << shift,
- clock_bits << shift);
-
- return 0;
-}
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
deleted file mode 100644
index cceb2e3..0000000
--- a/arch/powerpc/sysdev/qe_lib/ucc_fast.c
+++ /dev/null
@@ -1,364 +0,0 @@
-/*
- * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Authors: Shlomi Gridish <gridish@freescale.com>
- * Li Yang <leoli@freescale.com>
- *
- * Description:
- * QE UCC Fast API Set - UCC Fast specific routines implementations.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/stddef.h>
-#include <linux/interrupt.h>
-#include <linux/err.h>
-#include <linux/export.h>
-
-#include <asm/io.h>
-#include <asm/immap_qe.h>
-#include <asm/qe.h>
-
-#include <asm/ucc.h>
-#include <asm/ucc_fast.h>
-
-void ucc_fast_dump_regs(struct ucc_fast_private * uccf)
-{
- printk(KERN_INFO "UCC%u Fast registers:\n", uccf->uf_info->ucc_num);
- printk(KERN_INFO "Base address: 0x%p\n", uccf->uf_regs);
-
- printk(KERN_INFO "gumr : addr=0x%p, val=0x%08x\n",
- &uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr));
- printk(KERN_INFO "upsmr : addr=0x%p, val=0x%08x\n",
- &uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr));
- printk(KERN_INFO "utodr : addr=0x%p, val=0x%04x\n",
- &uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr));
- printk(KERN_INFO "udsr : addr=0x%p, val=0x%04x\n",
- &uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr));
- printk(KERN_INFO "ucce : addr=0x%p, val=0x%08x\n",
- &uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce));
- printk(KERN_INFO "uccm : addr=0x%p, val=0x%08x\n",
- &uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm));
- printk(KERN_INFO "uccs : addr=0x%p, val=0x%02x\n",
- &uccf->uf_regs->uccs, in_8(&uccf->uf_regs->uccs));
- printk(KERN_INFO "urfb : addr=0x%p, val=0x%08x\n",
- &uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb));
- printk(KERN_INFO "urfs : addr=0x%p, val=0x%04x\n",
- &uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs));
- printk(KERN_INFO "urfet : addr=0x%p, val=0x%04x\n",
- &uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet));
- printk(KERN_INFO "urfset: addr=0x%p, val=0x%04x\n",
- &uccf->uf_regs->urfset, in_be16(&uccf->uf_regs->urfset));
- printk(KERN_INFO "utfb : addr=0x%p, val=0x%08x\n",
- &uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb));
- printk(KERN_INFO "utfs : addr=0x%p, val=0x%04x\n",
- &uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs));
- printk(KERN_INFO "utfet : addr=0x%p, val=0x%04x\n",
- &uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet));
- printk(KERN_INFO "utftt : addr=0x%p, val=0x%04x\n",
- &uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt));
- printk(KERN_INFO "utpt : addr=0x%p, val=0x%04x\n",
- &uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt));
- printk(KERN_INFO "urtry : addr=0x%p, val=0x%08x\n",
- &uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry));
- printk(KERN_INFO "guemr : addr=0x%p, val=0x%02x\n",
- &uccf->uf_regs->guemr, in_8(&uccf->uf_regs->guemr));
-}
-EXPORT_SYMBOL(ucc_fast_dump_regs);
-
-u32 ucc_fast_get_qe_cr_subblock(int uccf_num)
-{
- switch (uccf_num) {
- case 0: return QE_CR_SUBBLOCK_UCCFAST1;
- case 1: return QE_CR_SUBBLOCK_UCCFAST2;
- case 2: return QE_CR_SUBBLOCK_UCCFAST3;
- case 3: return QE_CR_SUBBLOCK_UCCFAST4;
- case 4: return QE_CR_SUBBLOCK_UCCFAST5;
- case 5: return QE_CR_SUBBLOCK_UCCFAST6;
- case 6: return QE_CR_SUBBLOCK_UCCFAST7;
- case 7: return QE_CR_SUBBLOCK_UCCFAST8;
- default: return QE_CR_SUBBLOCK_INVALID;
- }
-}
-EXPORT_SYMBOL(ucc_fast_get_qe_cr_subblock);
-
-void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf)
-{
- out_be16(&uccf->uf_regs->utodr, UCC_FAST_TOD);
-}
-EXPORT_SYMBOL(ucc_fast_transmit_on_demand);
-
-void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode)
-{
- struct ucc_fast __iomem *uf_regs;
- u32 gumr;
-
- uf_regs = uccf->uf_regs;
-
- /* Enable reception and/or transmission on this UCC. */
- gumr = in_be32(&uf_regs->gumr);
- if (mode & COMM_DIR_TX) {
- gumr |= UCC_FAST_GUMR_ENT;
- uccf->enabled_tx = 1;
- }
- if (mode & COMM_DIR_RX) {
- gumr |= UCC_FAST_GUMR_ENR;
- uccf->enabled_rx = 1;
- }
- out_be32(&uf_regs->gumr, gumr);
-}
-EXPORT_SYMBOL(ucc_fast_enable);
-
-void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode)
-{
- struct ucc_fast __iomem *uf_regs;
- u32 gumr;
-
- uf_regs = uccf->uf_regs;
-
- /* Disable reception and/or transmission on this UCC. */
- gumr = in_be32(&uf_regs->gumr);
- if (mode & COMM_DIR_TX) {
- gumr &= ~UCC_FAST_GUMR_ENT;
- uccf->enabled_tx = 0;
- }
- if (mode & COMM_DIR_RX) {
- gumr &= ~UCC_FAST_GUMR_ENR;
- uccf->enabled_rx = 0;
- }
- out_be32(&uf_regs->gumr, gumr);
-}
-EXPORT_SYMBOL(ucc_fast_disable);
-
-int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret)
-{
- struct ucc_fast_private *uccf;
- struct ucc_fast __iomem *uf_regs;
- u32 gumr;
- int ret;
-
- if (!uf_info)
- return -EINVAL;
-
- /* check if the UCC port number is in range. */
- if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) {
- printk(KERN_ERR "%s: illegal UCC number\n", __func__);
- return -EINVAL;
- }
-
- /* Check that 'max_rx_buf_length' is properly aligned (4). */
- if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: max_rx_buf_length not aligned\n",
- __func__);
- return -EINVAL;
- }
-
- /* Validate Virtual Fifo register values */
- if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) {
- printk(KERN_ERR "%s: urfs is too small\n", __func__);
- return -EINVAL;
- }
-
- if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: urfs is not aligned\n", __func__);
- return -EINVAL;
- }
-
- if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: urfet is not aligned.\n", __func__);
- return -EINVAL;
- }
-
- if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: urfset is not aligned\n", __func__);
- return -EINVAL;
- }
-
- if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: utfs is not aligned\n", __func__);
- return -EINVAL;
- }
-
- if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: utfet is not aligned\n", __func__);
- return -EINVAL;
- }
-
- if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: utftt is not aligned\n", __func__);
- return -EINVAL;
- }
-
- uccf = kzalloc(sizeof(struct ucc_fast_private), GFP_KERNEL);
- if (!uccf) {
- printk(KERN_ERR "%s: Cannot allocate private data\n",
- __func__);
- return -ENOMEM;
- }
-
- /* Fill fast UCC structure */
- uccf->uf_info = uf_info;
- /* Set the PHY base address */
- uccf->uf_regs = ioremap(uf_info->regs, sizeof(struct ucc_fast));
- if (uccf->uf_regs == NULL) {
- printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
- kfree(uccf);
- return -ENOMEM;
- }
-
- uccf->enabled_tx = 0;
- uccf->enabled_rx = 0;
- uccf->stopped_tx = 0;
- uccf->stopped_rx = 0;
- uf_regs = uccf->uf_regs;
- uccf->p_ucce = &uf_regs->ucce;
- uccf->p_uccm = &uf_regs->uccm;
-#ifdef CONFIG_UGETH_TX_ON_DEMAND
- uccf->p_utodr = &uf_regs->utodr;
-#endif
-#ifdef STATISTICS
- uccf->tx_frames = 0;
- uccf->rx_frames = 0;
- uccf->rx_discarded = 0;
-#endif /* STATISTICS */
-
- /* Set UCC to fast type */
- ret = ucc_set_type(uf_info->ucc_num, UCC_SPEED_TYPE_FAST);
- if (ret) {
- printk(KERN_ERR "%s: cannot set UCC type\n", __func__);
- ucc_fast_free(uccf);
- return ret;
- }
-
- uccf->mrblr = uf_info->max_rx_buf_length;
-
- /* Set GUMR */
- /* For more details see the hardware spec. */
- gumr = uf_info->ttx_trx;
- if (uf_info->tci)
- gumr |= UCC_FAST_GUMR_TCI;
- if (uf_info->cdp)
- gumr |= UCC_FAST_GUMR_CDP;
- if (uf_info->ctsp)
- gumr |= UCC_FAST_GUMR_CTSP;
- if (uf_info->cds)
- gumr |= UCC_FAST_GUMR_CDS;
- if (uf_info->ctss)
- gumr |= UCC_FAST_GUMR_CTSS;
- if (uf_info->txsy)
- gumr |= UCC_FAST_GUMR_TXSY;
- if (uf_info->rsyn)
- gumr |= UCC_FAST_GUMR_RSYN;
- gumr |= uf_info->synl;
- if (uf_info->rtsm)
- gumr |= UCC_FAST_GUMR_RTSM;
- gumr |= uf_info->renc;
- if (uf_info->revd)
- gumr |= UCC_FAST_GUMR_REVD;
- gumr |= uf_info->tenc;
- gumr |= uf_info->tcrc;
- gumr |= uf_info->mode;
- out_be32(&uf_regs->gumr, gumr);
-
- /* Allocate memory for Tx Virtual Fifo */
- uccf->ucc_fast_tx_virtual_fifo_base_offset =
- qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
- if (IS_ERR_VALUE(uccf->ucc_fast_tx_virtual_fifo_base_offset)) {
- printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO\n",
- __func__);
- uccf->ucc_fast_tx_virtual_fifo_base_offset = 0;
- ucc_fast_free(uccf);
- return -ENOMEM;
- }
-
- /* Allocate memory for Rx Virtual Fifo */
- uccf->ucc_fast_rx_virtual_fifo_base_offset =
- qe_muram_alloc(uf_info->urfs +
- UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR,
- UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
- if (IS_ERR_VALUE(uccf->ucc_fast_rx_virtual_fifo_base_offset)) {
- printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO\n",
- __func__);
- uccf->ucc_fast_rx_virtual_fifo_base_offset = 0;
- ucc_fast_free(uccf);
- return -ENOMEM;
- }
-
- /* Set Virtual Fifo registers */
- out_be16(&uf_regs->urfs, uf_info->urfs);
- out_be16(&uf_regs->urfet, uf_info->urfet);
- out_be16(&uf_regs->urfset, uf_info->urfset);
- out_be16(&uf_regs->utfs, uf_info->utfs);
- out_be16(&uf_regs->utfet, uf_info->utfet);
- out_be16(&uf_regs->utftt, uf_info->utftt);
- /* utfb, urfb are offsets from MURAM base */
- out_be32(&uf_regs->utfb, uccf->ucc_fast_tx_virtual_fifo_base_offset);
- out_be32(&uf_regs->urfb, uccf->ucc_fast_rx_virtual_fifo_base_offset);
-
- /* Mux clocking */
- /* Grant Support */
- ucc_set_qe_mux_grant(uf_info->ucc_num, uf_info->grant_support);
- /* Breakpoint Support */
- ucc_set_qe_mux_bkpt(uf_info->ucc_num, uf_info->brkpt_support);
- /* Set Tsa or NMSI mode. */
- ucc_set_qe_mux_tsa(uf_info->ucc_num, uf_info->tsa);
- /* If NMSI (not Tsa), set Tx and Rx clock. */
- if (!uf_info->tsa) {
- /* Rx clock routing */
- if ((uf_info->rx_clock != QE_CLK_NONE) &&
- ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->rx_clock,
- COMM_DIR_RX)) {
- printk(KERN_ERR "%s: illegal value for RX clock\n",
- __func__);
- ucc_fast_free(uccf);
- return -EINVAL;
- }
- /* Tx clock routing */
- if ((uf_info->tx_clock != QE_CLK_NONE) &&
- ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->tx_clock,
- COMM_DIR_TX)) {
- printk(KERN_ERR "%s: illegal value for TX clock\n",
- __func__);
- ucc_fast_free(uccf);
- return -EINVAL;
- }
- }
-
- /* Set interrupt mask register at UCC level. */
- out_be32(&uf_regs->uccm, uf_info->uccm_mask);
-
- /* First, clear anything pending at UCC level,
- * otherwise, old garbage may come through
- * as soon as the dam is opened. */
-
- /* Writing '1' clears */
- out_be32(&uf_regs->ucce, 0xffffffff);
-
- *uccf_ret = uccf;
- return 0;
-}
-EXPORT_SYMBOL(ucc_fast_init);
-
-void ucc_fast_free(struct ucc_fast_private * uccf)
-{
- if (!uccf)
- return;
-
- if (uccf->ucc_fast_tx_virtual_fifo_base_offset)
- qe_muram_free(uccf->ucc_fast_tx_virtual_fifo_base_offset);
-
- if (uccf->ucc_fast_rx_virtual_fifo_base_offset)
- qe_muram_free(uccf->ucc_fast_rx_virtual_fifo_base_offset);
-
- if (uccf->uf_regs)
- iounmap(uccf->uf_regs);
-
- kfree(uccf);
-}
-EXPORT_SYMBOL(ucc_fast_free);
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
deleted file mode 100644
index 1c062f4..0000000
--- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c
+++ /dev/null
@@ -1,380 +0,0 @@
-/*
- * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Authors: Shlomi Gridish <gridish@freescale.com>
- * Li Yang <leoli@freescale.com>
- *
- * Description:
- * QE UCC Slow API Set - UCC Slow specific routines implementations.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/stddef.h>
-#include <linux/interrupt.h>
-#include <linux/err.h>
-#include <linux/export.h>
-
-#include <asm/io.h>
-#include <asm/immap_qe.h>
-#include <asm/qe.h>
-
-#include <asm/ucc.h>
-#include <asm/ucc_slow.h>
-
-u32 ucc_slow_get_qe_cr_subblock(int uccs_num)
-{
- switch (uccs_num) {
- case 0: return QE_CR_SUBBLOCK_UCCSLOW1;
- case 1: return QE_CR_SUBBLOCK_UCCSLOW2;
- case 2: return QE_CR_SUBBLOCK_UCCSLOW3;
- case 3: return QE_CR_SUBBLOCK_UCCSLOW4;
- case 4: return QE_CR_SUBBLOCK_UCCSLOW5;
- case 5: return QE_CR_SUBBLOCK_UCCSLOW6;
- case 6: return QE_CR_SUBBLOCK_UCCSLOW7;
- case 7: return QE_CR_SUBBLOCK_UCCSLOW8;
- default: return QE_CR_SUBBLOCK_INVALID;
- }
-}
-EXPORT_SYMBOL(ucc_slow_get_qe_cr_subblock);
-
-void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs)
-{
- out_be16(&uccs->us_regs->utodr, UCC_SLOW_TOD);
-}
-
-void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs)
-{
- struct ucc_slow_info *us_info = uccs->us_info;
- u32 id;
-
- id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
- qe_issue_cmd(QE_GRACEFUL_STOP_TX, id,
- QE_CR_PROTOCOL_UNSPECIFIED, 0);
-}
-EXPORT_SYMBOL(ucc_slow_graceful_stop_tx);
-
-void ucc_slow_stop_tx(struct ucc_slow_private * uccs)
-{
- struct ucc_slow_info *us_info = uccs->us_info;
- u32 id;
-
- id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
- qe_issue_cmd(QE_STOP_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
-}
-EXPORT_SYMBOL(ucc_slow_stop_tx);
-
-void ucc_slow_restart_tx(struct ucc_slow_private * uccs)
-{
- struct ucc_slow_info *us_info = uccs->us_info;
- u32 id;
-
- id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
- qe_issue_cmd(QE_RESTART_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
-}
-EXPORT_SYMBOL(ucc_slow_restart_tx);
-
-void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode)
-{
- struct ucc_slow *us_regs;
- u32 gumr_l;
-
- us_regs = uccs->us_regs;
-
- /* Enable reception and/or transmission on this UCC. */
- gumr_l = in_be32(&us_regs->gumr_l);
- if (mode & COMM_DIR_TX) {
- gumr_l |= UCC_SLOW_GUMR_L_ENT;
- uccs->enabled_tx = 1;
- }
- if (mode & COMM_DIR_RX) {
- gumr_l |= UCC_SLOW_GUMR_L_ENR;
- uccs->enabled_rx = 1;
- }
- out_be32(&us_regs->gumr_l, gumr_l);
-}
-EXPORT_SYMBOL(ucc_slow_enable);
-
-void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode)
-{
- struct ucc_slow *us_regs;
- u32 gumr_l;
-
- us_regs = uccs->us_regs;
-
- /* Disable reception and/or transmission on this UCC. */
- gumr_l = in_be32(&us_regs->gumr_l);
- if (mode & COMM_DIR_TX) {
- gumr_l &= ~UCC_SLOW_GUMR_L_ENT;
- uccs->enabled_tx = 0;
- }
- if (mode & COMM_DIR_RX) {
- gumr_l &= ~UCC_SLOW_GUMR_L_ENR;
- uccs->enabled_rx = 0;
- }
- out_be32(&us_regs->gumr_l, gumr_l);
-}
-EXPORT_SYMBOL(ucc_slow_disable);
-
-/* Initialize the UCC for Slow operations
- *
- * The caller should initialize the following us_info
- */
-int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret)
-{
- struct ucc_slow_private *uccs;
- u32 i;
- struct ucc_slow __iomem *us_regs;
- u32 gumr;
- struct qe_bd *bd;
- u32 id;
- u32 command;
- int ret = 0;
-
- if (!us_info)
- return -EINVAL;
-
- /* check if the UCC port number is in range. */
- if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) {
- printk(KERN_ERR "%s: illegal UCC number\n", __func__);
- return -EINVAL;
- }
-
- /*
- * Set mrblr
- * Check that 'max_rx_buf_length' is properly aligned (4), unless
- * rfw is 1, meaning that QE accepts one byte at a time, unlike normal
- * case when QE accepts 32 bits at a time.
- */
- if ((!us_info->rfw) &&
- (us_info->max_rx_buf_length & (UCC_SLOW_MRBLR_ALIGNMENT - 1))) {
- printk(KERN_ERR "max_rx_buf_length not aligned.\n");
- return -EINVAL;
- }
-
- uccs = kzalloc(sizeof(struct ucc_slow_private), GFP_KERNEL);
- if (!uccs) {
- printk(KERN_ERR "%s: Cannot allocate private data\n",
- __func__);
- return -ENOMEM;
- }
-
- /* Fill slow UCC structure */
- uccs->us_info = us_info;
- /* Set the PHY base address */
- uccs->us_regs = ioremap(us_info->regs, sizeof(struct ucc_slow));
- if (uccs->us_regs == NULL) {
- printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
- kfree(uccs);
- return -ENOMEM;
- }
-
- uccs->saved_uccm = 0;
- uccs->p_rx_frame = 0;
- us_regs = uccs->us_regs;
- uccs->p_ucce = (u16 *) & (us_regs->ucce);
- uccs->p_uccm = (u16 *) & (us_regs->uccm);
-#ifdef STATISTICS
- uccs->rx_frames = 0;
- uccs->tx_frames = 0;
- uccs->rx_discarded = 0;
-#endif /* STATISTICS */
-
- /* Get PRAM base */
- uccs->us_pram_offset =
- qe_muram_alloc(UCC_SLOW_PRAM_SIZE, ALIGNMENT_OF_UCC_SLOW_PRAM);
- if (IS_ERR_VALUE(uccs->us_pram_offset)) {
- printk(KERN_ERR "%s: cannot allocate MURAM for PRAM", __func__);
- ucc_slow_free(uccs);
- return -ENOMEM;
- }
- id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
- qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, us_info->protocol,
- uccs->us_pram_offset);
-
- uccs->us_pram = qe_muram_addr(uccs->us_pram_offset);
-
- /* Set UCC to slow type */
- ret = ucc_set_type(us_info->ucc_num, UCC_SPEED_TYPE_SLOW);
- if (ret) {
- printk(KERN_ERR "%s: cannot set UCC type", __func__);
- ucc_slow_free(uccs);
- return ret;
- }
-
- out_be16(&uccs->us_pram->mrblr, us_info->max_rx_buf_length);
-
- INIT_LIST_HEAD(&uccs->confQ);
-
- /* Allocate BDs. */
- uccs->rx_base_offset =
- qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd),
- QE_ALIGNMENT_OF_BD);
- if (IS_ERR_VALUE(uccs->rx_base_offset)) {
- printk(KERN_ERR "%s: cannot allocate %u RX BDs\n", __func__,
- us_info->rx_bd_ring_len);
- uccs->rx_base_offset = 0;
- ucc_slow_free(uccs);
- return -ENOMEM;
- }
-
- uccs->tx_base_offset =
- qe_muram_alloc(us_info->tx_bd_ring_len * sizeof(struct qe_bd),
- QE_ALIGNMENT_OF_BD);
- if (IS_ERR_VALUE(uccs->tx_base_offset)) {
- printk(KERN_ERR "%s: cannot allocate TX BDs", __func__);
- uccs->tx_base_offset = 0;
- ucc_slow_free(uccs);
- return -ENOMEM;
- }
-
- /* Init Tx bds */
- bd = uccs->confBd = uccs->tx_bd = qe_muram_addr(uccs->tx_base_offset);
- for (i = 0; i < us_info->tx_bd_ring_len - 1; i++) {
- /* clear bd buffer */
- out_be32(&bd->buf, 0);
- /* set bd status and length */
- out_be32((u32 *) bd, 0);
- bd++;
- }
- /* for last BD set Wrap bit */
- out_be32(&bd->buf, 0);
- out_be32((u32 *) bd, cpu_to_be32(T_W));
-
- /* Init Rx bds */
- bd = uccs->rx_bd = qe_muram_addr(uccs->rx_base_offset);
- for (i = 0; i < us_info->rx_bd_ring_len - 1; i++) {
- /* set bd status and length */
- out_be32((u32*)bd, 0);
- /* clear bd buffer */
- out_be32(&bd->buf, 0);
- bd++;
- }
- /* for last BD set Wrap bit */
- out_be32((u32*)bd, cpu_to_be32(R_W));
- out_be32(&bd->buf, 0);
-
- /* Set GUMR (For more details see the hardware spec.). */
- /* gumr_h */
- gumr = us_info->tcrc;
- if (us_info->cdp)
- gumr |= UCC_SLOW_GUMR_H_CDP;
- if (us_info->ctsp)
- gumr |= UCC_SLOW_GUMR_H_CTSP;
- if (us_info->cds)
- gumr |= UCC_SLOW_GUMR_H_CDS;
- if (us_info->ctss)
- gumr |= UCC_SLOW_GUMR_H_CTSS;
- if (us_info->tfl)
- gumr |= UCC_SLOW_GUMR_H_TFL;
- if (us_info->rfw)
- gumr |= UCC_SLOW_GUMR_H_RFW;
- if (us_info->txsy)
- gumr |= UCC_SLOW_GUMR_H_TXSY;
- if (us_info->rtsm)
- gumr |= UCC_SLOW_GUMR_H_RTSM;
- out_be32(&us_regs->gumr_h, gumr);
-
- /* gumr_l */
- gumr = us_info->tdcr | us_info->rdcr | us_info->tenc | us_info->renc |
- us_info->diag | us_info->mode;
- if (us_info->tci)
- gumr |= UCC_SLOW_GUMR_L_TCI;
- if (us_info->rinv)
- gumr |= UCC_SLOW_GUMR_L_RINV;
- if (us_info->tinv)
- gumr |= UCC_SLOW_GUMR_L_TINV;
- if (us_info->tend)
- gumr |= UCC_SLOW_GUMR_L_TEND;
- out_be32(&us_regs->gumr_l, gumr);
-
- /* Function code registers */
-
- /* if the data is in cachable memory, the 'global' */
- /* in the function code should be set. */
- uccs->us_pram->tbmr = UCC_BMR_BO_BE;
- uccs->us_pram->rbmr = UCC_BMR_BO_BE;
-
- /* rbase, tbase are offsets from MURAM base */
- out_be16(&uccs->us_pram->rbase, uccs->rx_base_offset);
- out_be16(&uccs->us_pram->tbase, uccs->tx_base_offset);
-
- /* Mux clocking */
- /* Grant Support */
- ucc_set_qe_mux_grant(us_info->ucc_num, us_info->grant_support);
- /* Breakpoint Support */
- ucc_set_qe_mux_bkpt(us_info->ucc_num, us_info->brkpt_support);
- /* Set Tsa or NMSI mode. */
- ucc_set_qe_mux_tsa(us_info->ucc_num, us_info->tsa);
- /* If NMSI (not Tsa), set Tx and Rx clock. */
- if (!us_info->tsa) {
- /* Rx clock routing */
- if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->rx_clock,
- COMM_DIR_RX)) {
- printk(KERN_ERR "%s: illegal value for RX clock\n",
- __func__);
- ucc_slow_free(uccs);
- return -EINVAL;
- }
- /* Tx clock routing */
- if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->tx_clock,
- COMM_DIR_TX)) {
- printk(KERN_ERR "%s: illegal value for TX clock\n",
- __func__);
- ucc_slow_free(uccs);
- return -EINVAL;
- }
- }
-
- /* Set interrupt mask register at UCC level. */
- out_be16(&us_regs->uccm, us_info->uccm_mask);
-
- /* First, clear anything pending at UCC level,
- * otherwise, old garbage may come through
- * as soon as the dam is opened. */
-
- /* Writing '1' clears */
- out_be16(&us_regs->ucce, 0xffff);
-
- /* Issue QE Init command */
- if (us_info->init_tx && us_info->init_rx)
- command = QE_INIT_TX_RX;
- else if (us_info->init_tx)
- command = QE_INIT_TX;
- else
- command = QE_INIT_RX; /* We know at least one is TRUE */
-
- qe_issue_cmd(command, id, us_info->protocol, 0);
-
- *uccs_ret = uccs;
- return 0;
-}
-EXPORT_SYMBOL(ucc_slow_init);
-
-void ucc_slow_free(struct ucc_slow_private * uccs)
-{
- if (!uccs)
- return;
-
- if (uccs->rx_base_offset)
- qe_muram_free(uccs->rx_base_offset);
-
- if (uccs->tx_base_offset)
- qe_muram_free(uccs->tx_base_offset);
-
- if (uccs->us_pram)
- qe_muram_free(uccs->us_pram_offset);
-
- if (uccs->us_regs)
- iounmap(uccs->us_regs);
-
- kfree(uccs);
-}
-EXPORT_SYMBOL(ucc_slow_free);
-
diff --git a/arch/powerpc/sysdev/qe_lib/usb.c b/arch/powerpc/sysdev/qe_lib/usb.c
deleted file mode 100644
index 27f23bd..0000000
--- a/arch/powerpc/sysdev/qe_lib/usb.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * QE USB routines
- *
- * Copyright 2006 Freescale Semiconductor, Inc.
- * Shlomi Gridish <gridish@freescale.com>
- * Jerry Huang <Chang-Ming.Huang@freescale.com>
- * Copyright (c) MontaVista Software, Inc. 2008.
- * Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/export.h>
-#include <linux/io.h>
-#include <asm/immap_qe.h>
-#include <asm/qe.h>
-
-int qe_usb_clock_set(enum qe_clock clk, int rate)
-{
- struct qe_mux __iomem *mux = &qe_immr->qmx;
- unsigned long flags;
- u32 val;
-
- switch (clk) {
- case QE_CLK3: val = QE_CMXGCR_USBCS_CLK3; break;
- case QE_CLK5: val = QE_CMXGCR_USBCS_CLK5; break;
- case QE_CLK7: val = QE_CMXGCR_USBCS_CLK7; break;
- case QE_CLK9: val = QE_CMXGCR_USBCS_CLK9; break;
- case QE_CLK13: val = QE_CMXGCR_USBCS_CLK13; break;
- case QE_CLK17: val = QE_CMXGCR_USBCS_CLK17; break;
- case QE_CLK19: val = QE_CMXGCR_USBCS_CLK19; break;
- case QE_CLK21: val = QE_CMXGCR_USBCS_CLK21; break;
- case QE_BRG9: val = QE_CMXGCR_USBCS_BRG9; break;
- case QE_BRG10: val = QE_CMXGCR_USBCS_BRG10; break;
- default:
- pr_err("%s: requested unknown clock %d\n", __func__, clk);
- return -EINVAL;
- }
-
- if (qe_clock_is_brg(clk))
- qe_setbrg(clk, rate, 1);
-
- spin_lock_irqsave(&cmxgcr_lock, flags);
-
- clrsetbits_be32(&mux->cmxgcr, QE_CMXGCR_USBCS, val);
-
- spin_unlock_irqrestore(&cmxgcr_lock, flags);
-
- return 0;
-}
-EXPORT_SYMBOL(qe_usb_clock_set);
diff --git a/drivers/Kconfig b/drivers/Kconfig
index aa43b91..643bfc8 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -14,6 +14,8 @@ source "drivers/parport/Kconfig"
source "drivers/pnp/Kconfig"
+source "drivers/qe/Kconfig"
+
source "drivers/block/Kconfig"
# misc before ide - BLK_DEV_SGIIOC4 depends on SGI_IOC4
diff --git a/drivers/Makefile b/drivers/Makefile
index ab93de8..70f6b68 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -18,6 +18,9 @@ obj-$(CONFIG_RAPIDIO) += rapidio/
obj-y += video/
obj-y += idle/
+#QUICC Engine code
+obj-$(CONFIG_QUICC_ENGINE) += qe/
+
# IPMI must come before ACPI in order to provide IPMI opregion support
obj-$(CONFIG_IPMI_HANDLER) += char/ipmi/
diff --git a/drivers/net/ethernet/freescale/fsl_pq_mdio.c b/drivers/net/ethernet/freescale/fsl_pq_mdio.c
index c93a056..e0de0b6 100644
--- a/drivers/net/ethernet/freescale/fsl_pq_mdio.c
+++ b/drivers/net/ethernet/freescale/fsl_pq_mdio.c
@@ -29,7 +29,7 @@
#include <linux/of_device.h>
#include <asm/io.h>
-#include <asm/ucc.h> /* for ucc_set_qe_mux_mii_mng() */
+#include <qe/ucc.h> /* for ucc_set_qe_mux_mii_mng() */
#include "gianfar.h"
diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index 3c43dac..43bf490 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -38,10 +38,10 @@
#include <asm/uaccess.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <asm/immap_qe.h>
-#include <asm/qe.h>
-#include <asm/ucc.h>
-#include <asm/ucc_fast.h>
+#include <qe/immap_qe.h>
+#include <qe/qe.h>
+#include <qe/ucc.h>
+#include <qe/ucc_fast.h>
#include <asm/machdep.h>
#include "ucc_geth.h"
diff --git a/drivers/net/ethernet/freescale/ucc_geth.h b/drivers/net/ethernet/freescale/ucc_geth.h
index 75f3371..6d00a43 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.h
+++ b/drivers/net/ethernet/freescale/ucc_geth.h
@@ -22,11 +22,11 @@
#include <linux/list.h>
#include <linux/if_ether.h>
-#include <asm/immap_qe.h>
-#include <asm/qe.h>
+#include <qe/immap_qe.h>
+#include <qe/qe.h>
-#include <asm/ucc.h>
-#include <asm/ucc_fast.h>
+#include <qe/ucc.h>
+#include <qe/ucc_fast.h>
#define DRV_DESC "QE UCC Gigabit Ethernet Controller"
#define DRV_NAME "ucc_geth"
diff --git a/drivers/qe/Kconfig b/drivers/qe/Kconfig
new file mode 100644
index 0000000..00301cc
--- /dev/null
+++ b/drivers/qe/Kconfig
@@ -0,0 +1,51 @@
+#
+# QE Communication options
+#
+
+menuconfig QUICC_ENGINE
+ bool "Freescale QUICC Engine (QE) Support"
+ depends on FSL_SOC
+ select PPC_LIB_RHEAP
+ select CRC32
+ help
+ The QUICC Engine (QE) is a new generation of communications
+ coprocessors on Freescale embedded CPUs (akin to CPM in older chips).
+ Selecting this option means that you wish to build a kernel
+ for a machine with a QE coprocessor.
+
+if QUICC_ENGINE
+
+config QE_GPIO
+ bool "QE GPIO support"
+ depends on QUICC_ENGINE
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Say Y here if you're going to use hardware that connects to the
+ QE GPIOs.
+
+config UCC_SLOW
+ bool
+ default y if SERIAL_QE
+ help
+ This option provides qe_lib support to UCC slow
+ protocols: UART, BISYNC, QMC
+
+config UCC_FAST
+ bool
+ default y if UCC_GETH
+ help
+ This option provides qe_lib support to UCC fast
+ protocols: HDLC, Ethernet, ATM, transparent
+
+config UCC
+ bool
+ default y if UCC_FAST || UCC_SLOW
+
+config QE_USB
+ bool
+ default y if USB_FSL_QE
+ help
+ QE USB Controller support
+
+endif
diff --git a/drivers/qe/Makefile b/drivers/qe/Makefile
new file mode 100644
index 0000000..77f6fd9
--- /dev/null
+++ b/drivers/qe/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the linux ppc-specific parts of QE
+#
+obj-$(CONFIG_QUICC_ENGINE)+= qe.o qe_ic.o qe_io.o qe_common.o
+
+obj-$(CONFIG_UCC) += ucc.o
+obj-$(CONFIG_UCC_SLOW) += ucc_slow.o
+obj-$(CONFIG_UCC_FAST) += ucc_fast.o
+obj-$(CONFIG_QE_USB) += usb.o
+obj-$(CONFIG_QE_GPIO) += gpio.o
diff --git a/drivers/qe/gpio.c b/drivers/qe/gpio.c
new file mode 100644
index 0000000..50c4b8d
--- /dev/null
+++ b/drivers/qe/gpio.c
@@ -0,0 +1,317 @@
+/*
+ * QUICC Engine GPIOs
+ *
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+#include <qe/qe.h>
+
+struct qe_gpio_chip {
+ struct of_mm_gpio_chip mm_gc;
+ spinlock_t lock;
+
+ unsigned long pin_flags[QE_PIO_PINS];
+#define QE_PIN_REQUESTED 0
+
+ /* shadowed data register to clear/set bits safely */
+ u32 cpdata;
+
+ /* saved_regs used to restore dedicated functions */
+ struct qe_pio_regs saved_regs;
+};
+
+static inline struct qe_gpio_chip *
+to_qe_gpio_chip(struct of_mm_gpio_chip *mm_gc)
+{
+ return container_of(mm_gc, struct qe_gpio_chip, mm_gc);
+}
+
+static void qe_gpio_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+ struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
+ struct qe_pio_regs __iomem *regs = mm_gc->regs;
+
+ qe_gc->cpdata = in_be32(®s->cpdata);
+ qe_gc->saved_regs.cpdata = qe_gc->cpdata;
+ qe_gc->saved_regs.cpdir1 = in_be32(®s->cpdir1);
+ qe_gc->saved_regs.cpdir2 = in_be32(®s->cpdir2);
+ qe_gc->saved_regs.cppar1 = in_be32(®s->cppar1);
+ qe_gc->saved_regs.cppar2 = in_be32(®s->cppar2);
+ qe_gc->saved_regs.cpodr = in_be32(®s->cpodr);
+}
+
+static int qe_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct qe_pio_regs __iomem *regs = mm_gc->regs;
+ u32 pin_mask = 1 << (QE_PIO_PINS - 1 - gpio);
+
+ return in_be32(®s->cpdata) & pin_mask;
+}
+
+static void qe_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
+ struct qe_pio_regs __iomem *regs = mm_gc->regs;
+ unsigned long flags;
+ u32 pin_mask = 1 << (QE_PIO_PINS - 1 - gpio);
+
+ spin_lock_irqsave(&qe_gc->lock, flags);
+
+ if (val)
+ qe_gc->cpdata |= pin_mask;
+ else
+ qe_gc->cpdata &= ~pin_mask;
+
+ out_be32(®s->cpdata, qe_gc->cpdata);
+
+ spin_unlock_irqrestore(&qe_gc->lock, flags);
+}
+
+static int qe_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
+ unsigned long flags;
+
+ spin_lock_irqsave(&qe_gc->lock, flags);
+
+ __par_io_config_pin(mm_gc->regs, gpio, QE_PIO_DIR_IN, 0, 0, 0);
+
+ spin_unlock_irqrestore(&qe_gc->lock, flags);
+
+ return 0;
+}
+
+static int qe_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
+ unsigned long flags;
+
+ qe_gpio_set(gc, gpio, val);
+
+ spin_lock_irqsave(&qe_gc->lock, flags);
+
+ __par_io_config_pin(mm_gc->regs, gpio, QE_PIO_DIR_OUT, 0, 0, 0);
+
+ spin_unlock_irqrestore(&qe_gc->lock, flags);
+
+ return 0;
+}
+
+struct qe_pin {
+ /*
+ * The qe_gpio_chip name is unfortunate, we should change that to
+ * something like qe_pio_controller. Someday.
+ */
+ struct qe_gpio_chip *controller;
+ int num;
+};
+
+/**
+ * qe_pin_request - Request a QE pin
+ * @np: device node to get a pin from
+ * @index: index of a pin in the device tree
+ * Context: non-atomic
+ *
+ * This function return qe_pin so that you could use it with the rest of
+ * the QE Pin Multiplexing API.
+ */
+struct qe_pin *qe_pin_request(struct device_node *np, int index)
+{
+ struct qe_pin *qe_pin;
+ struct gpio_chip *gc;
+ struct of_mm_gpio_chip *mm_gc;
+ struct qe_gpio_chip *qe_gc;
+ int err;
+ unsigned long flags;
+
+ qe_pin = kzalloc(sizeof(*qe_pin), GFP_KERNEL);
+ if (!qe_pin) {
+ pr_debug("%s: can't allocate memory\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ err = of_get_gpio(np, index);
+ if (err < 0)
+ goto err0;
+ gc = gpio_to_chip(err);
+ if (WARN_ON(!gc))
+ goto err0;
+
+ if (!of_device_is_compatible(gc->of_node, "fsl,mpc8323-qe-pario-bank")) {
+ pr_debug("%s: tried to get a non-qe pin\n", __func__);
+ err = -EINVAL;
+ goto err0;
+ }
+
+ mm_gc = to_of_mm_gpio_chip(gc);
+ qe_gc = to_qe_gpio_chip(mm_gc);
+
+ spin_lock_irqsave(&qe_gc->lock, flags);
+
+ err -= gc->base;
+ if (test_and_set_bit(QE_PIN_REQUESTED, &qe_gc->pin_flags[err]) == 0) {
+ qe_pin->controller = qe_gc;
+ qe_pin->num = err;
+ err = 0;
+ } else {
+ err = -EBUSY;
+ }
+
+ spin_unlock_irqrestore(&qe_gc->lock, flags);
+
+ if (!err)
+ return qe_pin;
+err0:
+ kfree(qe_pin);
+ pr_debug("%s failed with status %d\n", __func__, err);
+ return ERR_PTR(err);
+}
+EXPORT_SYMBOL(qe_pin_request);
+
+/**
+ * qe_pin_free - Free a pin
+ * @qe_pin: pointer to the qe_pin structure
+ * Context: any
+ *
+ * This function frees the qe_pin structure and makes a pin available
+ * for further qe_pin_request() calls.
+ */
+void qe_pin_free(struct qe_pin *qe_pin)
+{
+ struct qe_gpio_chip *qe_gc = qe_pin->controller;
+ unsigned long flags;
+ const int pin = qe_pin->num;
+
+ spin_lock_irqsave(&qe_gc->lock, flags);
+ test_and_clear_bit(QE_PIN_REQUESTED, &qe_gc->pin_flags[pin]);
+ spin_unlock_irqrestore(&qe_gc->lock, flags);
+
+ kfree(qe_pin);
+}
+EXPORT_SYMBOL(qe_pin_free);
+
+/**
+ * qe_pin_set_dedicated - Revert a pin to a dedicated peripheral function mode
+ * @qe_pin: pointer to the qe_pin structure
+ * Context: any
+ *
+ * This function resets a pin to a dedicated peripheral function that
+ * has been set up by the firmware.
+ */
+void qe_pin_set_dedicated(struct qe_pin *qe_pin)
+{
+ struct qe_gpio_chip *qe_gc = qe_pin->controller;
+ struct qe_pio_regs __iomem *regs = qe_gc->mm_gc.regs;
+ struct qe_pio_regs *sregs = &qe_gc->saved_regs;
+ int pin = qe_pin->num;
+ u32 mask1 = 1 << (QE_PIO_PINS - (pin + 1));
+ u32 mask2 = 0x3 << (QE_PIO_PINS - (pin % (QE_PIO_PINS / 2) + 1) * 2);
+ bool second_reg = pin > (QE_PIO_PINS / 2) - 1;
+ unsigned long flags;
+
+ spin_lock_irqsave(&qe_gc->lock, flags);
+
+ if (second_reg) {
+ clrsetbits_be32(®s->cpdir2, mask2, sregs->cpdir2 & mask2);
+ clrsetbits_be32(®s->cppar2, mask2, sregs->cppar2 & mask2);
+ } else {
+ clrsetbits_be32(®s->cpdir1, mask2, sregs->cpdir1 & mask2);
+ clrsetbits_be32(®s->cppar1, mask2, sregs->cppar1 & mask2);
+ }
+
+ if (sregs->cpdata & mask1)
+ qe_gc->cpdata |= mask1;
+ else
+ qe_gc->cpdata &= ~mask1;
+
+ out_be32(®s->cpdata, qe_gc->cpdata);
+ clrsetbits_be32(®s->cpodr, mask1, sregs->cpodr & mask1);
+
+ spin_unlock_irqrestore(&qe_gc->lock, flags);
+}
+EXPORT_SYMBOL(qe_pin_set_dedicated);
+
+/**
+ * qe_pin_set_gpio - Set a pin to the GPIO mode
+ * @qe_pin: pointer to the qe_pin structure
+ * Context: any
+ *
+ * This function sets a pin to the GPIO mode.
+ */
+void qe_pin_set_gpio(struct qe_pin *qe_pin)
+{
+ struct qe_gpio_chip *qe_gc = qe_pin->controller;
+ struct qe_pio_regs __iomem *regs = qe_gc->mm_gc.regs;
+ unsigned long flags;
+
+ spin_lock_irqsave(&qe_gc->lock, flags);
+
+ /* Let's make it input by default, GPIO API is able to change that. */
+ __par_io_config_pin(regs, qe_pin->num, QE_PIO_DIR_IN, 0, 0, 0);
+
+ spin_unlock_irqrestore(&qe_gc->lock, flags);
+}
+EXPORT_SYMBOL(qe_pin_set_gpio);
+
+static int __init qe_add_gpiochips(void)
+{
+ struct device_node *np;
+
+ for_each_compatible_node(np, NULL, "fsl,mpc8323-qe-pario-bank") {
+ int ret;
+ struct qe_gpio_chip *qe_gc;
+ struct of_mm_gpio_chip *mm_gc;
+ struct gpio_chip *gc;
+
+ qe_gc = kzalloc(sizeof(*qe_gc), GFP_KERNEL);
+ if (!qe_gc) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ spin_lock_init(&qe_gc->lock);
+
+ mm_gc = &qe_gc->mm_gc;
+ gc = &mm_gc->gc;
+
+ mm_gc->save_regs = qe_gpio_save_regs;
+ gc->ngpio = QE_PIO_PINS;
+ gc->direction_input = qe_gpio_dir_in;
+ gc->direction_output = qe_gpio_dir_out;
+ gc->get = qe_gpio_get;
+ gc->set = qe_gpio_set;
+
+ ret = of_mm_gpiochip_add(np, mm_gc);
+ if (ret)
+ goto err;
+ continue;
+err:
+ pr_err("%s: registration failed with status %d\n",
+ np->full_name, ret);
+ kfree(qe_gc);
+ /* try others anyway */
+ }
+ return 0;
+}
+arch_initcall(qe_add_gpiochips);
diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c
new file mode 100644
index 0000000..f87c48f
--- /dev/null
+++ b/drivers/qe/qe.c
@@ -0,0 +1,708 @@
+/*
+ * Copyright (C) 2006-2010 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ * Based on cpm2_common.c from Dan Malek (dmalek@jlc.net)
+ *
+ * Description:
+ * General Purpose functions for the global management of the
+ * QUICC Engine (QE).
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/bootmem.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/crc32.h>
+#include <linux/mod_devicetable.h>
+#include <linux/of_platform.h>
+#include <asm/irq.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <qe/immap_qe.h>
+#include <qe/qe.h>
+#include <asm/prom.h>
+#include <asm/rheap.h>
+
+static void qe_snums_init(void);
+static int qe_sdma_init(void);
+
+static DEFINE_SPINLOCK(qe_lock);
+DEFINE_SPINLOCK(cmxgcr_lock);
+EXPORT_SYMBOL(cmxgcr_lock);
+
+/* QE snum state */
+enum qe_snum_state {
+ QE_SNUM_STATE_USED,
+ QE_SNUM_STATE_FREE
+};
+
+/* QE snum */
+struct qe_snum {
+ u8 num;
+ enum qe_snum_state state;
+};
+
+/* We allocate this here because it is used almost exclusively for
+ * the communication processor devices.
+ */
+struct qe_immap __iomem *qe_immr;
+EXPORT_SYMBOL(qe_immr);
+
+static struct qe_snum snums[QE_NUM_OF_SNUM]; /* Dynamically allocated SNUMs */
+static unsigned int qe_num_of_snum;
+
+static phys_addr_t qebase = -1;
+
+phys_addr_t get_qe_base(void)
+{
+ struct device_node *qe;
+ int size;
+ const u32 *prop;
+
+ if (qebase != -1)
+ return qebase;
+
+ qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
+ if (!qe) {
+ qe = of_find_node_by_type(NULL, "qe");
+ if (!qe)
+ return qebase;
+ }
+
+ prop = of_get_property(qe, "reg", &size);
+ if (prop && size >= sizeof(*prop))
+ qebase = of_translate_address(qe, prop);
+ of_node_put(qe);
+
+ return qebase;
+}
+
+EXPORT_SYMBOL(get_qe_base);
+
+void qe_reset(void)
+{
+ if (qe_immr == NULL)
+ qe_immr = ioremap(get_qe_base(), QE_IMMAP_SIZE);
+
+ qe_snums_init();
+
+ qe_issue_cmd(QE_RESET, QE_CR_SUBBLOCK_INVALID,
+ QE_CR_PROTOCOL_UNSPECIFIED, 0);
+
+ /* Reclaim the MURAM memory for our use. */
+ qe_muram_init();
+
+ if (qe_sdma_init())
+ panic("sdma init failed!");
+}
+
+int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input)
+{
+ unsigned long flags;
+ u8 mcn_shift = 0, dev_shift = 0;
+ u32 ret;
+
+ spin_lock_irqsave(&qe_lock, flags);
+ if (cmd == QE_RESET) {
+ out_be32(&qe_immr->cp.cecr, (u32) (cmd | QE_CR_FLG));
+ } else {
+ if (cmd == QE_ASSIGN_PAGE) {
+ /* Here device is the SNUM, not sub-block */
+ dev_shift = QE_CR_SNUM_SHIFT;
+ } else if (cmd == QE_ASSIGN_RISC) {
+ /* Here device is the SNUM, and mcnProtocol is
+ * e_QeCmdRiscAssignment value */
+ dev_shift = QE_CR_SNUM_SHIFT;
+ mcn_shift = QE_CR_MCN_RISC_ASSIGN_SHIFT;
+ } else {
+ if (device == QE_CR_SUBBLOCK_USB)
+ mcn_shift = QE_CR_MCN_USB_SHIFT;
+ else
+ mcn_shift = QE_CR_MCN_NORMAL_SHIFT;
+ }
+
+ out_be32(&qe_immr->cp.cecdr, cmd_input);
+ out_be32(&qe_immr->cp.cecr,
+ (cmd | QE_CR_FLG | ((u32) device << dev_shift) | (u32)
+ mcn_protocol << mcn_shift));
+ }
+
+ /* wait for the QE_CR_FLG to clear */
+ ret = spin_event_timeout((in_be32(&qe_immr->cp.cecr) & QE_CR_FLG) == 0,
+ 100, 0);
+ /* On timeout (e.g. failure), the expression will be false (ret == 0),
+ otherwise it will be true (ret == 1). */
+ spin_unlock_irqrestore(&qe_lock, flags);
+
+ return ret == 1;
+}
+EXPORT_SYMBOL(qe_issue_cmd);
+
+/* Set a baud rate generator. This needs lots of work. There are
+ * 16 BRGs, which can be connected to the QE channels or output
+ * as clocks. The BRGs are in two different block of internal
+ * memory mapped space.
+ * The BRG clock is the QE clock divided by 2.
+ * It was set up long ago during the initial boot phase and is
+ * is given to us.
+ * Baud rate clocks are zero-based in the driver code (as that maps
+ * to port numbers). Documentation uses 1-based numbering.
+ */
+static unsigned int brg_clk = 0;
+
+unsigned int qe_get_brg_clk(void)
+{
+ struct device_node *qe;
+ int size;
+ const u32 *prop;
+
+ if (brg_clk)
+ return brg_clk;
+
+ qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
+ if (!qe) {
+ qe = of_find_node_by_type(NULL, "qe");
+ if (!qe)
+ return brg_clk;
+ }
+
+ prop = of_get_property(qe, "brg-frequency", &size);
+ if (prop && size == sizeof(*prop))
+ brg_clk = *prop;
+
+ of_node_put(qe);
+
+ return brg_clk;
+}
+EXPORT_SYMBOL(qe_get_brg_clk);
+
+/* Program the BRG to the given sampling rate and multiplier
+ *
+ * @brg: the BRG, QE_BRG1 - QE_BRG16
+ * @rate: the desired sampling rate
+ * @multiplier: corresponds to the value programmed in GUMR_L[RDCR] or
+ * GUMR_L[TDCR]. E.g., if this BRG is the RX clock, and GUMR_L[RDCR]=01,
+ * then 'multiplier' should be 8.
+ */
+int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier)
+{
+ u32 divisor, tempval;
+ u32 div16 = 0;
+
+ if ((brg < QE_BRG1) || (brg > QE_BRG16))
+ return -EINVAL;
+
+ divisor = qe_get_brg_clk() / (rate * multiplier);
+
+ if (divisor > QE_BRGC_DIVISOR_MAX + 1) {
+ div16 = QE_BRGC_DIV16;
+ divisor /= 16;
+ }
+
+ /* Errata QE_General4, which affects some MPC832x and MPC836x SOCs, says
+ that the BRG divisor must be even if you're not using divide-by-16
+ mode. */
+ if (!div16 && (divisor & 1) && (divisor > 3))
+ divisor++;
+
+ tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) |
+ QE_BRGC_ENABLE | div16;
+
+ out_be32(&qe_immr->brg.brgc[brg - QE_BRG1], tempval);
+
+ return 0;
+}
+EXPORT_SYMBOL(qe_setbrg);
+
+/* Convert a string to a QE clock source enum
+ *
+ * This function takes a string, typically from a property in the device
+ * tree, and returns the corresponding "enum qe_clock" value.
+*/
+enum qe_clock qe_clock_source(const char *source)
+{
+ unsigned int i;
+
+ if (strcasecmp(source, "none") == 0)
+ return QE_CLK_NONE;
+
+ if (strncasecmp(source, "brg", 3) == 0) {
+ i = simple_strtoul(source + 3, NULL, 10);
+ if ((i >= 1) && (i <= 16))
+ return (QE_BRG1 - 1) + i;
+ else
+ return QE_CLK_DUMMY;
+ }
+
+ if (strncasecmp(source, "clk", 3) == 0) {
+ i = simple_strtoul(source + 3, NULL, 10);
+ if ((i >= 1) && (i <= 24))
+ return (QE_CLK1 - 1) + i;
+ else
+ return QE_CLK_DUMMY;
+ }
+
+ return QE_CLK_DUMMY;
+}
+EXPORT_SYMBOL(qe_clock_source);
+
+/* Initialize SNUMs (thread serial numbers) according to
+ * QE Module Control chapter, SNUM table
+ */
+static void qe_snums_init(void)
+{
+ int i;
+ static const u8 snum_init_76[] = {
+ 0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D,
+ 0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89,
+ 0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9,
+ 0xD8, 0xD9, 0xE8, 0xE9, 0x44, 0x45, 0x4C, 0x4D,
+ 0x54, 0x55, 0x5C, 0x5D, 0x64, 0x65, 0x6C, 0x6D,
+ 0x74, 0x75, 0x7C, 0x7D, 0x84, 0x85, 0x8C, 0x8D,
+ 0x94, 0x95, 0x9C, 0x9D, 0xA4, 0xA5, 0xAC, 0xAD,
+ 0xB4, 0xB5, 0xBC, 0xBD, 0xC4, 0xC5, 0xCC, 0xCD,
+ 0xD4, 0xD5, 0xDC, 0xDD, 0xE4, 0xE5, 0xEC, 0xED,
+ 0xF4, 0xF5, 0xFC, 0xFD,
+ };
+ static const u8 snum_init_46[] = {
+ 0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D,
+ 0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89,
+ 0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9,
+ 0xD8, 0xD9, 0xE8, 0xE9, 0x08, 0x09, 0x18, 0x19,
+ 0x28, 0x29, 0x38, 0x39, 0x48, 0x49, 0x58, 0x59,
+ 0x68, 0x69, 0x78, 0x79, 0x80, 0x81,
+ };
+ static const u8 *snum_init;
+
+ qe_num_of_snum = qe_get_num_of_snums();
+
+ if (qe_num_of_snum == 76)
+ snum_init = snum_init_76;
+ else
+ snum_init = snum_init_46;
+
+ for (i = 0; i < qe_num_of_snum; i++) {
+ snums[i].num = snum_init[i];
+ snums[i].state = QE_SNUM_STATE_FREE;
+ }
+}
+
+int qe_get_snum(void)
+{
+ unsigned long flags;
+ int snum = -EBUSY;
+ int i;
+
+ spin_lock_irqsave(&qe_lock, flags);
+ for (i = 0; i < qe_num_of_snum; i++) {
+ if (snums[i].state == QE_SNUM_STATE_FREE) {
+ snums[i].state = QE_SNUM_STATE_USED;
+ snum = snums[i].num;
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&qe_lock, flags);
+
+ return snum;
+}
+EXPORT_SYMBOL(qe_get_snum);
+
+void qe_put_snum(u8 snum)
+{
+ int i;
+
+ for (i = 0; i < qe_num_of_snum; i++) {
+ if (snums[i].num == snum) {
+ snums[i].state = QE_SNUM_STATE_FREE;
+ break;
+ }
+ }
+}
+EXPORT_SYMBOL(qe_put_snum);
+
+static int qe_sdma_init(void)
+{
+ struct sdma __iomem *sdma = &qe_immr->sdma;
+ static unsigned long sdma_buf_offset = (unsigned long)-ENOMEM;
+
+ if (!sdma)
+ return -ENODEV;
+
+ /* allocate 2 internal temporary buffers (512 bytes size each) for
+ * the SDMA */
+ if (IS_ERR_VALUE(sdma_buf_offset)) {
+ sdma_buf_offset = qe_muram_alloc(512 * 2, 4096);
+ if (IS_ERR_VALUE(sdma_buf_offset))
+ return -ENOMEM;
+ }
+
+ out_be32(&sdma->sdebcr, (u32) sdma_buf_offset & QE_SDEBCR_BA_MASK);
+ out_be32(&sdma->sdmr, (QE_SDMR_GLB_1_MSK |
+ (0x1 << QE_SDMR_CEN_SHIFT)));
+
+ return 0;
+}
+
+/* The maximum number of RISCs we support */
+#define MAX_QE_RISC 4
+
+/* Firmware information stored here for qe_get_firmware_info() */
+static struct qe_firmware_info qe_firmware_info;
+
+/*
+ * Set to 1 if QE firmware has been uploaded, and therefore
+ * qe_firmware_info contains valid data.
+ */
+static int qe_firmware_uploaded;
+
+/*
+ * Upload a QE microcode
+ *
+ * This function is a worker function for qe_upload_firmware(). It does
+ * the actual uploading of the microcode.
+ */
+static void qe_upload_microcode(const void *base,
+ const struct qe_microcode *ucode)
+{
+ const __be32 *code = base + be32_to_cpu(ucode->code_offset);
+ unsigned int i;
+
+ if (ucode->major || ucode->minor || ucode->revision)
+ printk(KERN_INFO "qe-firmware: "
+ "uploading microcode '%s' version %u.%u.%u\n",
+ ucode->id, ucode->major, ucode->minor, ucode->revision);
+ else
+ printk(KERN_INFO "qe-firmware: "
+ "uploading microcode '%s'\n", ucode->id);
+
+ /* Use auto-increment */
+ out_be32(&qe_immr->iram.iadd, be32_to_cpu(ucode->iram_offset) |
+ QE_IRAM_IADD_AIE | QE_IRAM_IADD_BADDR);
+
+ for (i = 0; i < be32_to_cpu(ucode->count); i++)
+ out_be32(&qe_immr->iram.idata, be32_to_cpu(code[i]));
+
+ /* Set I-RAM Ready Register */
+ out_be32(&qe_immr->iram.iready, be32_to_cpu(QE_IRAM_READY));
+}
+
+/*
+ * Upload a microcode to the I-RAM at a specific address.
+ *
+ * See Documentation/powerpc/qe_firmware.txt for information on QE microcode
+ * uploading.
+ *
+ * Currently, only version 1 is supported, so the 'version' field must be
+ * set to 1.
+ *
+ * The SOC model and revision are not validated, they are only displayed for
+ * informational purposes.
+ *
+ * 'calc_size' is the calculated size, in bytes, of the firmware structure and
+ * all of the microcode structures, minus the CRC.
+ *
+ * 'length' is the size that the structure says it is, including the CRC.
+ */
+int qe_upload_firmware(const struct qe_firmware *firmware)
+{
+ unsigned int i;
+ unsigned int j;
+ u32 crc;
+ size_t calc_size = sizeof(struct qe_firmware);
+ size_t length;
+ const struct qe_header *hdr;
+
+ if (!firmware) {
+ printk(KERN_ERR "qe-firmware: invalid pointer\n");
+ return -EINVAL;
+ }
+
+ hdr = &firmware->header;
+ length = be32_to_cpu(hdr->length);
+
+ /* Check the magic */
+ if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') ||
+ (hdr->magic[2] != 'F')) {
+ printk(KERN_ERR "qe-firmware: not a microcode\n");
+ return -EPERM;
+ }
+
+ /* Check the version */
+ if (hdr->version != 1) {
+ printk(KERN_ERR "qe-firmware: unsupported version\n");
+ return -EPERM;
+ }
+
+ /* Validate some of the fields */
+ if ((firmware->count < 1) || (firmware->count > MAX_QE_RISC)) {
+ printk(KERN_ERR "qe-firmware: invalid data\n");
+ return -EINVAL;
+ }
+
+ /* Validate the length and check if there's a CRC */
+ calc_size += (firmware->count - 1) * sizeof(struct qe_microcode);
+
+ for (i = 0; i < firmware->count; i++)
+ /*
+ * For situations where the second RISC uses the same microcode
+ * as the first, the 'code_offset' and 'count' fields will be
+ * zero, so it's okay to add those.
+ */
+ calc_size += sizeof(__be32) *
+ be32_to_cpu(firmware->microcode[i].count);
+
+ /* Validate the length */
+ if (length != calc_size + sizeof(__be32)) {
+ printk(KERN_ERR "qe-firmware: invalid length\n");
+ return -EPERM;
+ }
+
+ /* Validate the CRC */
+ crc = be32_to_cpu(*(__be32 *)((void *)firmware + calc_size));
+ if (crc != crc32(0, firmware, calc_size)) {
+ printk(KERN_ERR "qe-firmware: firmware CRC is invalid\n");
+ return -EIO;
+ }
+
+ /*
+ * If the microcode calls for it, split the I-RAM.
+ */
+ if (!firmware->split)
+ setbits16(&qe_immr->cp.cercr, QE_CP_CERCR_CIR);
+
+ if (firmware->soc.model)
+ printk(KERN_INFO
+ "qe-firmware: firmware '%s' for %u V%u.%u\n",
+ firmware->id, be16_to_cpu(firmware->soc.model),
+ firmware->soc.major, firmware->soc.minor);
+ else
+ printk(KERN_INFO "qe-firmware: firmware '%s'\n",
+ firmware->id);
+
+ /*
+ * The QE only supports one microcode per RISC, so clear out all the
+ * saved microcode information and put in the new.
+ */
+ memset(&qe_firmware_info, 0, sizeof(qe_firmware_info));
+ strcpy(qe_firmware_info.id, firmware->id);
+ qe_firmware_info.extended_modes = firmware->extended_modes;
+ memcpy(qe_firmware_info.vtraps, firmware->vtraps,
+ sizeof(firmware->vtraps));
+
+ /* Loop through each microcode. */
+ for (i = 0; i < firmware->count; i++) {
+ const struct qe_microcode *ucode = &firmware->microcode[i];
+
+ /* Upload a microcode if it's present */
+ if (ucode->code_offset)
+ qe_upload_microcode(firmware, ucode);
+
+ /* Program the traps for this processor */
+ for (j = 0; j < 16; j++) {
+ u32 trap = be32_to_cpu(ucode->traps[j]);
+
+ if (trap)
+ out_be32(&qe_immr->rsp[i].tibcr[j], trap);
+ }
+
+ /* Enable traps */
+ out_be32(&qe_immr->rsp[i].eccr, be32_to_cpu(ucode->eccr));
+ }
+
+ qe_firmware_uploaded = 1;
+
+ return 0;
+}
+EXPORT_SYMBOL(qe_upload_firmware);
+
+/*
+ * Get info on the currently-loaded firmware
+ *
+ * This function also checks the device tree to see if the boot loader has
+ * uploaded a firmware already.
+ */
+struct qe_firmware_info *qe_get_firmware_info(void)
+{
+ static int initialized;
+ struct property *prop;
+ struct device_node *qe;
+ struct device_node *fw = NULL;
+ const char *sprop;
+ unsigned int i;
+
+ /*
+ * If we haven't checked yet, and a driver hasn't uploaded a firmware
+ * yet, then check the device tree for information.
+ */
+ if (qe_firmware_uploaded)
+ return &qe_firmware_info;
+
+ if (initialized)
+ return NULL;
+
+ initialized = 1;
+
+ /*
+ * Newer device trees have an "fsl,qe" compatible property for the QE
+ * node, but we still need to support older device trees.
+ */
+ qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
+ if (!qe) {
+ qe = of_find_node_by_type(NULL, "qe");
+ if (!qe)
+ return NULL;
+ }
+
+ /* Find the 'firmware' child node */
+ for_each_child_of_node(qe, fw) {
+ if (strcmp(fw->name, "firmware") == 0)
+ break;
+ }
+
+ of_node_put(qe);
+
+ /* Did we find the 'firmware' node? */
+ if (!fw)
+ return NULL;
+
+ qe_firmware_uploaded = 1;
+
+ /* Copy the data into qe_firmware_info*/
+ sprop = of_get_property(fw, "id", NULL);
+ if (sprop)
+ strncpy(qe_firmware_info.id, sprop,
+ sizeof(qe_firmware_info.id) - 1);
+
+ prop = of_find_property(fw, "extended-modes", NULL);
+ if (prop && (prop->length == sizeof(u64))) {
+ const u64 *iprop = prop->value;
+
+ qe_firmware_info.extended_modes = *iprop;
+ }
+
+ prop = of_find_property(fw, "virtual-traps", NULL);
+ if (prop && (prop->length == 32)) {
+ const u32 *iprop = prop->value;
+
+ for (i = 0; i < ARRAY_SIZE(qe_firmware_info.vtraps); i++)
+ qe_firmware_info.vtraps[i] = iprop[i];
+ }
+
+ of_node_put(fw);
+
+ return &qe_firmware_info;
+}
+EXPORT_SYMBOL(qe_get_firmware_info);
+
+unsigned int qe_get_num_of_risc(void)
+{
+ struct device_node *qe;
+ int size;
+ unsigned int num_of_risc = 0;
+ const u32 *prop;
+
+ qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
+ if (!qe) {
+ /* Older devices trees did not have an "fsl,qe"
+ * compatible property, so we need to look for
+ * the QE node by name.
+ */
+ qe = of_find_node_by_type(NULL, "qe");
+ if (!qe)
+ return num_of_risc;
+ }
+
+ prop = of_get_property(qe, "fsl,qe-num-riscs", &size);
+ if (prop && size == sizeof(*prop))
+ num_of_risc = *prop;
+
+ of_node_put(qe);
+
+ return num_of_risc;
+}
+EXPORT_SYMBOL(qe_get_num_of_risc);
+
+unsigned int qe_get_num_of_snums(void)
+{
+ struct device_node *qe;
+ int size;
+ unsigned int num_of_snums;
+ const u32 *prop;
+
+ num_of_snums = 28; /* The default number of snum for threads is 28 */
+ qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
+ if (!qe) {
+ /* Older devices trees did not have an "fsl,qe"
+ * compatible property, so we need to look for
+ * the QE node by name.
+ */
+ qe = of_find_node_by_type(NULL, "qe");
+ if (!qe)
+ return num_of_snums;
+ }
+
+ prop = of_get_property(qe, "fsl,qe-num-snums", &size);
+ if (prop && size == sizeof(*prop)) {
+ num_of_snums = *prop;
+ if ((num_of_snums < 28) || (num_of_snums > QE_NUM_OF_SNUM)) {
+ /* No QE ever has fewer than 28 SNUMs */
+ pr_err("QE: number of snum is invalid\n");
+ of_node_put(qe);
+ return -EINVAL;
+ }
+ }
+
+ of_node_put(qe);
+
+ return num_of_snums;
+}
+EXPORT_SYMBOL(qe_get_num_of_snums);
+
+#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx)
+static int qe_resume(struct platform_device *ofdev)
+{
+ if (!qe_alive_during_sleep())
+ qe_reset();
+ return 0;
+}
+
+static int qe_probe(struct platform_device *ofdev)
+{
+ return 0;
+}
+
+static const struct of_device_id qe_ids[] = {
+ { .compatible = "fsl,qe", },
+ { },
+};
+
+static struct platform_driver qe_driver = {
+ .driver = {
+ .name = "fsl-qe",
+ .owner = THIS_MODULE,
+ .of_match_table = qe_ids,
+ },
+ .probe = qe_probe,
+ .resume = qe_resume,
+};
+
+static int __init qe_drv_init(void)
+{
+ return platform_driver_register(&qe_driver);
+}
+device_initcall(qe_drv_init);
+#endif /* defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx) */
diff --git a/drivers/qe/qe_common.c b/drivers/qe/qe_common.c
new file mode 100644
index 0000000..ad8578c
--- /dev/null
+++ b/drivers/qe/qe_common.c
@@ -0,0 +1,187 @@
+/*
+ * Common QE code
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright 2007-2008,2010,2013 Freescale Semiconductor, Inc.
+ *
+ * Some parts derived from commproc.c/cpm2_common.c, which is:
+ * Copyright (c) 1997 Dan error_act (dmalek@jlc.net)
+ * Copyright (c) 1999-2001 Dan Malek <dan@embeddedalley.com>
+ * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com)
+ * 2006 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/of_device.h>
+#include <linux/spinlock.h>
+#include <linux/export.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+
+#include <asm/udbg.h>
+#include <asm/io.h>
+#include <asm/rheap.h>
+#include <qe/qe.h>
+
+#include <mm/mmu_decl.h>
+
+static spinlock_t qe_muram_lock;
+static rh_block_t qe_boot_muram_rh_block[16];
+static rh_info_t qe_muram_info;
+static u8 __iomem *muram_vbase;
+static phys_addr_t muram_pbase;
+
+/* Max address size we deal with */
+#define OF_MAX_ADDR_CELLS 4
+
+int qe_muram_init(void)
+{
+ struct device_node *np;
+ struct resource r;
+ u32 zero[OF_MAX_ADDR_CELLS] = {};
+ resource_size_t max = 0;
+ int i = 0;
+ int ret = 0;
+
+ if (muram_pbase)
+ return 0;
+
+ spin_lock_init(&qe_muram_lock);
+ /* initialize the info header */
+ rh_init(&qe_muram_info, 1,
+ sizeof(qe_boot_muram_rh_block) /
+ sizeof(qe_boot_muram_rh_block[0]),
+ qe_boot_muram_rh_block);
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,qe-muram-data");
+ if (!np) {
+ /* try legacy bindings */
+ np = of_find_node_by_name(NULL, "data-only");
+ if (!np) {
+ printk(KERN_ERR "Cannot find CPM muram data node");
+ ret = -ENODEV;
+ goto out;
+ }
+ }
+
+ muram_pbase = of_translate_address(np, zero);
+ if (muram_pbase == (phys_addr_t)OF_BAD_ADDR) {
+ printk(KERN_ERR "Cannot translate zero through CPM muram node");
+ ret = -ENODEV;
+ goto out;
+ }
+
+ while (of_address_to_resource(np, i++, &r) == 0) {
+ if (r.end > max)
+ max = r.end;
+
+ rh_attach_region(&qe_muram_info, r.start - muram_pbase,
+ resource_size(&r));
+ }
+
+ muram_vbase = ioremap(muram_pbase, max - muram_pbase + 1);
+ if (!muram_vbase) {
+ printk(KERN_ERR "Cannot map CPM muram");
+ ret = -ENOMEM;
+ }
+
+out:
+ of_node_put(np);
+ return ret;
+}
+
+/**
+ * qe_muram_alloc - allocate the requested size worth of multi-user ram
+ * @size: number of bytes to allocate
+ * @align: requested alignment, in bytes
+ *
+ * This function returns an offset into the muram area.
+ * Use qe_dpram_addr() to get the virtual address of the area.
+ * Use qe_muram_free() to free the allocation.
+ */
+unsigned long qe_muram_alloc(unsigned long size, unsigned long align)
+{
+ unsigned long start;
+ unsigned long flags;
+
+ spin_lock_irqsave(&qe_muram_lock, flags);
+ qe_muram_info.alignment = align;
+ start = rh_alloc(&qe_muram_info, size, "commproc");
+ memset(qe_muram_addr(start), 0, size);
+ spin_unlock_irqrestore(&qe_muram_lock, flags);
+
+ return start;
+}
+EXPORT_SYMBOL(qe_muram_alloc);
+
+/**
+ * qe_muram_free - free a chunk of multi-user ram
+ * @offset: The beginning of the chunk as returned by qe_muram_alloc().
+ */
+int qe_muram_free(unsigned long offset)
+{
+ int ret;
+ unsigned long flags;
+
+ spin_lock_irqsave(&qe_muram_lock, flags);
+ ret = rh_free(&qe_muram_info, offset);
+ spin_unlock_irqrestore(&qe_muram_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(qe_muram_free);
+
+/**
+ * qe_muram_alloc_fixed - reserve a specific region of multi-user ram
+ * @offset: the offset into the muram area to reserve
+ * @size: the number of bytes to reserve
+ *
+ * This function returns "start" on success, -ENOMEM on failure.
+ * Use qe_dpram_addr() to get the virtual address of the area.
+ * Use qe_muram_free() to free the allocation.
+ */
+unsigned long qe_muram_alloc_fixed(unsigned long offset, unsigned long size)
+{
+ unsigned long start;
+ unsigned long flags;
+
+ spin_lock_irqsave(&qe_muram_lock, flags);
+ qe_muram_info.alignment = 1;
+ start = rh_alloc_fixed(&qe_muram_info, offset, size, "commproc");
+ spin_unlock_irqrestore(&qe_muram_lock, flags);
+
+ return start;
+}
+EXPORT_SYMBOL(qe_muram_alloc_fixed);
+
+/**
+ * qe_muram_addr - turn a muram offset into a virtual address
+ * @offset: muram offset to convert
+ */
+void __iomem *qe_muram_addr(unsigned long offset)
+{
+ return muram_vbase + offset;
+}
+EXPORT_SYMBOL(qe_muram_addr);
+
+unsigned long qe_muram_offset(void __iomem *addr)
+{
+ return addr - (void __iomem *)muram_vbase;
+}
+EXPORT_SYMBOL(qe_muram_offset);
+
+/**
+ * qe_muram_dma - turn a muram virtual address into a DMA address
+ * @offset: virtual address from qe_muram_addr() to convert
+ */
+dma_addr_t qe_muram_dma(void __iomem *addr)
+{
+ return muram_pbase + ((u8 __iomem *)addr - muram_vbase);
+}
+EXPORT_SYMBOL(qe_muram_dma);
diff --git a/drivers/qe/qe_ic.c b/drivers/qe/qe_ic.c
new file mode 100644
index 0000000..30a998b
--- /dev/null
+++ b/drivers/qe/qe_ic.c
@@ -0,0 +1,501 @@
+/*
+ * arch/powerpc/sysdev/qe_lib/qe_ic.c
+ *
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: Li Yang <leoli@freescale.com>
+ * Based on code from Shlomi Gridish <gridish@freescale.com>
+ *
+ * QUICC ENGINE Interrupt Controller
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/device.h>
+#include <linux/bootmem.h>
+#include <linux/spinlock.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <qe/qe_ic.h>
+
+#include "qe_ic.h"
+
+static DEFINE_RAW_SPINLOCK(qe_ic_lock);
+
+static struct qe_ic_info qe_ic_info[] = {
+ [1] = {
+ .mask = 0x00008000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 0,
+ .pri_reg = QEIC_CIPWCC,
+ },
+ [2] = {
+ .mask = 0x00004000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 1,
+ .pri_reg = QEIC_CIPWCC,
+ },
+ [3] = {
+ .mask = 0x00002000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 2,
+ .pri_reg = QEIC_CIPWCC,
+ },
+ [10] = {
+ .mask = 0x00000040,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 1,
+ .pri_reg = QEIC_CIPZCC,
+ },
+ [11] = {
+ .mask = 0x00000020,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 2,
+ .pri_reg = QEIC_CIPZCC,
+ },
+ [12] = {
+ .mask = 0x00000010,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 3,
+ .pri_reg = QEIC_CIPZCC,
+ },
+ [13] = {
+ .mask = 0x00000008,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 4,
+ .pri_reg = QEIC_CIPZCC,
+ },
+ [14] = {
+ .mask = 0x00000004,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 5,
+ .pri_reg = QEIC_CIPZCC,
+ },
+ [15] = {
+ .mask = 0x00000002,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 6,
+ .pri_reg = QEIC_CIPZCC,
+ },
+ [20] = {
+ .mask = 0x10000000,
+ .mask_reg = QEIC_CRIMR,
+ .pri_code = 3,
+ .pri_reg = QEIC_CIPRTA,
+ },
+ [25] = {
+ .mask = 0x00800000,
+ .mask_reg = QEIC_CRIMR,
+ .pri_code = 0,
+ .pri_reg = QEIC_CIPRTB,
+ },
+ [26] = {
+ .mask = 0x00400000,
+ .mask_reg = QEIC_CRIMR,
+ .pri_code = 1,
+ .pri_reg = QEIC_CIPRTB,
+ },
+ [27] = {
+ .mask = 0x00200000,
+ .mask_reg = QEIC_CRIMR,
+ .pri_code = 2,
+ .pri_reg = QEIC_CIPRTB,
+ },
+ [28] = {
+ .mask = 0x00100000,
+ .mask_reg = QEIC_CRIMR,
+ .pri_code = 3,
+ .pri_reg = QEIC_CIPRTB,
+ },
+ [32] = {
+ .mask = 0x80000000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 0,
+ .pri_reg = QEIC_CIPXCC,
+ },
+ [33] = {
+ .mask = 0x40000000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 1,
+ .pri_reg = QEIC_CIPXCC,
+ },
+ [34] = {
+ .mask = 0x20000000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 2,
+ .pri_reg = QEIC_CIPXCC,
+ },
+ [35] = {
+ .mask = 0x10000000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 3,
+ .pri_reg = QEIC_CIPXCC,
+ },
+ [36] = {
+ .mask = 0x08000000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 4,
+ .pri_reg = QEIC_CIPXCC,
+ },
+ [40] = {
+ .mask = 0x00800000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 0,
+ .pri_reg = QEIC_CIPYCC,
+ },
+ [41] = {
+ .mask = 0x00400000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 1,
+ .pri_reg = QEIC_CIPYCC,
+ },
+ [42] = {
+ .mask = 0x00200000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 2,
+ .pri_reg = QEIC_CIPYCC,
+ },
+ [43] = {
+ .mask = 0x00100000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 3,
+ .pri_reg = QEIC_CIPYCC,
+ },
+};
+
+static inline u32 qe_ic_read(volatile __be32 __iomem * base, unsigned int reg)
+{
+ return in_be32(base + (reg >> 2));
+}
+
+static inline void qe_ic_write(volatile __be32 __iomem * base, unsigned int reg,
+ u32 value)
+{
+ out_be32(base + (reg >> 2), value);
+}
+
+static inline struct qe_ic *qe_ic_from_irq(unsigned int virq)
+{
+ return irq_get_chip_data(virq);
+}
+
+static inline struct qe_ic *qe_ic_from_irq_data(struct irq_data *d)
+{
+ return irq_data_get_irq_chip_data(d);
+}
+
+static void qe_ic_unmask_irq(struct irq_data *d)
+{
+ struct qe_ic *qe_ic = qe_ic_from_irq_data(d);
+ unsigned int src = irqd_to_hwirq(d);
+ unsigned long flags;
+ u32 temp;
+
+ raw_spin_lock_irqsave(&qe_ic_lock, flags);
+
+ temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
+ qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
+ temp | qe_ic_info[src].mask);
+
+ raw_spin_unlock_irqrestore(&qe_ic_lock, flags);
+}
+
+static void qe_ic_mask_irq(struct irq_data *d)
+{
+ struct qe_ic *qe_ic = qe_ic_from_irq_data(d);
+ unsigned int src = irqd_to_hwirq(d);
+ unsigned long flags;
+ u32 temp;
+
+ raw_spin_lock_irqsave(&qe_ic_lock, flags);
+
+ temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
+ qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
+ temp & ~qe_ic_info[src].mask);
+
+ /* Flush the above write before enabling interrupts; otherwise,
+ * spurious interrupts will sometimes happen. To be 100% sure
+ * that the write has reached the device before interrupts are
+ * enabled, the mask register would have to be read back; however,
+ * this is not required for correctness, only to avoid wasting
+ * time on a large number of spurious interrupts. In testing,
+ * a sync reduced the observed spurious interrupts to zero.
+ */
+ mb();
+
+ raw_spin_unlock_irqrestore(&qe_ic_lock, flags);
+}
+
+static struct irq_chip qe_ic_irq_chip = {
+ .name = "QEIC",
+ .irq_unmask = qe_ic_unmask_irq,
+ .irq_mask = qe_ic_mask_irq,
+ .irq_mask_ack = qe_ic_mask_irq,
+};
+
+static int qe_ic_host_match(struct irq_domain *h, struct device_node *node)
+{
+ /* Exact match, unless qe_ic node is NULL */
+ return h->of_node == NULL || h->of_node == node;
+}
+
+static int qe_ic_host_map(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct qe_ic *qe_ic = h->host_data;
+ struct irq_chip *chip;
+
+ if (qe_ic_info[hw].mask == 0) {
+ printk(KERN_ERR "Can't map reserved IRQ\n");
+ return -EINVAL;
+ }
+ /* Default chip */
+ chip = &qe_ic->hc_irq;
+
+ irq_set_chip_data(virq, qe_ic);
+ irq_set_status_flags(virq, IRQ_LEVEL);
+
+ irq_set_chip_and_handler(virq, chip, handle_level_irq);
+
+ return 0;
+}
+
+static struct irq_domain_ops qe_ic_host_ops = {
+ .match = qe_ic_host_match,
+ .map = qe_ic_host_map,
+ .xlate = irq_domain_xlate_onetwocell,
+};
+
+/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
+unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic)
+{
+ int irq;
+
+ BUG_ON(qe_ic == NULL);
+
+ /* get the interrupt source vector. */
+ irq = qe_ic_read(qe_ic->regs, QEIC_CIVEC) >> 26;
+
+ if (irq == 0)
+ return NO_IRQ;
+
+ return irq_linear_revmap(qe_ic->irqhost, irq);
+}
+
+/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
+unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic)
+{
+ int irq;
+
+ BUG_ON(qe_ic == NULL);
+
+ /* get the interrupt source vector. */
+ irq = qe_ic_read(qe_ic->regs, QEIC_CHIVEC) >> 26;
+
+ if (irq == 0)
+ return NO_IRQ;
+
+ return irq_linear_revmap(qe_ic->irqhost, irq);
+}
+
+void __init qe_ic_init(struct device_node *node, unsigned int flags,
+ void (*low_handler)(unsigned int irq, struct irq_desc *desc),
+ void (*high_handler)(unsigned int irq, struct irq_desc *desc))
+{
+ struct qe_ic *qe_ic;
+ struct resource res;
+ u32 temp = 0, ret, high_active = 0;
+
+ ret = of_address_to_resource(node, 0, &res);
+ if (ret)
+ return;
+
+ qe_ic = kzalloc(sizeof(*qe_ic), GFP_KERNEL);
+ if (qe_ic == NULL)
+ return;
+
+ qe_ic->irqhost = irq_domain_add_linear(node, NR_QE_IC_INTS,
+ &qe_ic_host_ops, qe_ic);
+ if (qe_ic->irqhost == NULL) {
+ kfree(qe_ic);
+ return;
+ }
+
+ qe_ic->regs = ioremap(res.start, resource_size(&res));
+
+ qe_ic->hc_irq = qe_ic_irq_chip;
+
+ qe_ic->virq_high = irq_of_parse_and_map(node, 0);
+ qe_ic->virq_low = irq_of_parse_and_map(node, 1);
+
+ if (qe_ic->virq_low == NO_IRQ) {
+ printk(KERN_ERR "Failed to map QE_IC low IRQ\n");
+ kfree(qe_ic);
+ return;
+ }
+
+ /* default priority scheme is grouped. If spread mode is */
+ /* required, configure cicr accordingly. */
+ if (flags & QE_IC_SPREADMODE_GRP_W)
+ temp |= CICR_GWCC;
+ if (flags & QE_IC_SPREADMODE_GRP_X)
+ temp |= CICR_GXCC;
+ if (flags & QE_IC_SPREADMODE_GRP_Y)
+ temp |= CICR_GYCC;
+ if (flags & QE_IC_SPREADMODE_GRP_Z)
+ temp |= CICR_GZCC;
+ if (flags & QE_IC_SPREADMODE_GRP_RISCA)
+ temp |= CICR_GRTA;
+ if (flags & QE_IC_SPREADMODE_GRP_RISCB)
+ temp |= CICR_GRTB;
+
+ /* choose destination signal for highest priority interrupt */
+ if (flags & QE_IC_HIGH_SIGNAL) {
+ temp |= (SIGNAL_HIGH << CICR_HPIT_SHIFT);
+ high_active = 1;
+ }
+
+ qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
+
+ irq_set_handler_data(qe_ic->virq_low, qe_ic);
+ irq_set_chained_handler(qe_ic->virq_low, low_handler);
+
+ if (qe_ic->virq_high != NO_IRQ &&
+ qe_ic->virq_high != qe_ic->virq_low) {
+ irq_set_handler_data(qe_ic->virq_high, qe_ic);
+ irq_set_chained_handler(qe_ic->virq_high, high_handler);
+ }
+}
+
+void qe_ic_set_highest_priority(unsigned int virq, int high)
+{
+ struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+ unsigned int src = virq_to_hw(virq);
+ u32 temp = 0;
+
+ temp = qe_ic_read(qe_ic->regs, QEIC_CICR);
+
+ temp &= ~CICR_HP_MASK;
+ temp |= src << CICR_HP_SHIFT;
+
+ temp &= ~CICR_HPIT_MASK;
+ temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << CICR_HPIT_SHIFT;
+
+ qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
+}
+
+/* Set Priority level within its group, from 1 to 8 */
+int qe_ic_set_priority(unsigned int virq, unsigned int priority)
+{
+ struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+ unsigned int src = virq_to_hw(virq);
+ u32 temp;
+
+ if (priority > 8 || priority == 0)
+ return -EINVAL;
+ if (src > 127)
+ return -EINVAL;
+ if (qe_ic_info[src].pri_reg == 0)
+ return -EINVAL;
+
+ temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].pri_reg);
+
+ if (priority < 4) {
+ temp &= ~(0x7 << (32 - priority * 3));
+ temp |= qe_ic_info[src].pri_code << (32 - priority * 3);
+ } else {
+ temp &= ~(0x7 << (24 - priority * 3));
+ temp |= qe_ic_info[src].pri_code << (24 - priority * 3);
+ }
+
+ qe_ic_write(qe_ic->regs, qe_ic_info[src].pri_reg, temp);
+
+ return 0;
+}
+
+/* Set a QE priority to use high irq, only priority 1~2 can use high irq */
+int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high)
+{
+ struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+ unsigned int src = virq_to_hw(virq);
+ u32 temp, control_reg = QEIC_CICNR, shift = 0;
+
+ if (priority > 2 || priority == 0)
+ return -EINVAL;
+
+ switch (qe_ic_info[src].pri_reg) {
+ case QEIC_CIPZCC:
+ shift = CICNR_ZCC1T_SHIFT;
+ break;
+ case QEIC_CIPWCC:
+ shift = CICNR_WCC1T_SHIFT;
+ break;
+ case QEIC_CIPYCC:
+ shift = CICNR_YCC1T_SHIFT;
+ break;
+ case QEIC_CIPXCC:
+ shift = CICNR_XCC1T_SHIFT;
+ break;
+ case QEIC_CIPRTA:
+ shift = CRICR_RTA1T_SHIFT;
+ control_reg = QEIC_CRICR;
+ break;
+ case QEIC_CIPRTB:
+ shift = CRICR_RTB1T_SHIFT;
+ control_reg = QEIC_CRICR;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ shift += (2 - priority) * 2;
+ temp = qe_ic_read(qe_ic->regs, control_reg);
+ temp &= ~(SIGNAL_MASK << shift);
+ temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << shift;
+ qe_ic_write(qe_ic->regs, control_reg, temp);
+
+ return 0;
+}
+
+static struct bus_type qe_ic_subsys = {
+ .name = "qe_ic",
+ .dev_name = "qe_ic",
+};
+
+static struct device device_qe_ic = {
+ .id = 0,
+ .bus = &qe_ic_subsys,
+};
+
+static int __init init_qe_ic_sysfs(void)
+{
+ int rc;
+
+ printk(KERN_DEBUG "Registering qe_ic with sysfs...\n");
+
+ rc = subsys_system_register(&qe_ic_subsys, NULL);
+ if (rc) {
+ printk(KERN_ERR "Failed registering qe_ic sys class\n");
+ return -ENODEV;
+ }
+ rc = device_register(&device_qe_ic);
+ if (rc) {
+ printk(KERN_ERR "Failed registering qe_ic sys device\n");
+ return -ENODEV;
+ }
+ return 0;
+}
+
+subsys_initcall(init_qe_ic_sysfs);
diff --git a/drivers/qe/qe_ic.h b/drivers/qe/qe_ic.h
new file mode 100644
index 0000000..0d0d195
--- /dev/null
+++ b/drivers/qe/qe_ic.h
@@ -0,0 +1,103 @@
+/*
+ * arch/powerpc/sysdev/qe_lib/qe_ic.h
+ *
+ * QUICC ENGINE Interrupt Controller Header
+ *
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: Li Yang <leoli@freescale.com>
+ * Based on code from Shlomi Gridish <gridish@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef _POWERPC_SYSDEV_QE_IC_H
+#define _POWERPC_SYSDEV_QE_IC_H
+
+#include <qe/qe_ic.h>
+
+#define NR_QE_IC_INTS 64
+
+/* QE IC registers offset */
+#define QEIC_CICR 0x00
+#define QEIC_CIVEC 0x04
+#define QEIC_CRIPNR 0x08
+#define QEIC_CIPNR 0x0c
+#define QEIC_CIPXCC 0x10
+#define QEIC_CIPYCC 0x14
+#define QEIC_CIPWCC 0x18
+#define QEIC_CIPZCC 0x1c
+#define QEIC_CIMR 0x20
+#define QEIC_CRIMR 0x24
+#define QEIC_CICNR 0x28
+#define QEIC_CIPRTA 0x30
+#define QEIC_CIPRTB 0x34
+#define QEIC_CRICR 0x3c
+#define QEIC_CHIVEC 0x60
+
+/* Interrupt priority registers */
+#define CIPCC_SHIFT_PRI0 29
+#define CIPCC_SHIFT_PRI1 26
+#define CIPCC_SHIFT_PRI2 23
+#define CIPCC_SHIFT_PRI3 20
+#define CIPCC_SHIFT_PRI4 13
+#define CIPCC_SHIFT_PRI5 10
+#define CIPCC_SHIFT_PRI6 7
+#define CIPCC_SHIFT_PRI7 4
+
+/* CICR priority modes */
+#define CICR_GWCC 0x00040000
+#define CICR_GXCC 0x00020000
+#define CICR_GYCC 0x00010000
+#define CICR_GZCC 0x00080000
+#define CICR_GRTA 0x00200000
+#define CICR_GRTB 0x00400000
+#define CICR_HPIT_SHIFT 8
+#define CICR_HPIT_MASK 0x00000300
+#define CICR_HP_SHIFT 24
+#define CICR_HP_MASK 0x3f000000
+
+/* CICNR */
+#define CICNR_WCC1T_SHIFT 20
+#define CICNR_ZCC1T_SHIFT 28
+#define CICNR_YCC1T_SHIFT 12
+#define CICNR_XCC1T_SHIFT 4
+
+/* CRICR */
+#define CRICR_RTA1T_SHIFT 20
+#define CRICR_RTB1T_SHIFT 28
+
+/* Signal indicator */
+#define SIGNAL_MASK 3
+#define SIGNAL_HIGH 2
+#define SIGNAL_LOW 0
+
+struct qe_ic {
+ /* Control registers offset */
+ volatile u32 __iomem *regs;
+
+ /* The remapper for this QEIC */
+ struct irq_domain *irqhost;
+
+ /* The "linux" controller struct */
+ struct irq_chip hc_irq;
+
+ /* VIRQ numbers of QE high/low irqs */
+ unsigned int virq_high;
+ unsigned int virq_low;
+};
+
+/*
+ * QE interrupt controller internal structure
+ */
+struct qe_ic_info {
+ u32 mask; /* location of this source at the QIMR register. */
+ u32 mask_reg; /* Mask register offset */
+ u8 pri_code; /* for grouped interrupts sources - the interrupt
+ code as appears at the group priority register */
+ u32 pri_reg; /* Group priority register offset */
+};
+
+#endif /* _POWERPC_SYSDEV_QE_IC_H */
diff --git a/drivers/qe/qe_io.c b/drivers/qe/qe_io.c
new file mode 100644
index 0000000..ad9ff4e
--- /dev/null
+++ b/drivers/qe/qe_io.c
@@ -0,0 +1,218 @@
+/*
+ * arch/powerpc/sysdev/qe_lib/qe_io.c
+ *
+ * QE Parallel I/O ports configuration routines
+ *
+ * Copyright 2006 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: Li Yang <LeoLi@freescale.com>
+ * Based on code from Shlomi Gridish <gridish@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+
+#include <asm/io.h>
+#include <qe/qe.h>
+#include <asm/prom.h>
+#include <sysdev/fsl_soc.h>
+
+#undef DEBUG
+
+static struct qe_pio_regs __iomem *par_io;
+static int num_par_io_ports = 0;
+
+int par_io_init(struct device_node *np)
+{
+ struct resource res;
+ int ret;
+ const u32 *num_ports;
+
+ /* Map Parallel I/O ports registers */
+ ret = of_address_to_resource(np, 0, &res);
+ if (ret)
+ return ret;
+ par_io = ioremap(res.start, resource_size(&res));
+
+ num_ports = of_get_property(np, "num-ports", NULL);
+ if (num_ports)
+ num_par_io_ports = *num_ports;
+
+ return 0;
+}
+
+void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin, int dir,
+ int open_drain, int assignment, int has_irq)
+{
+ u32 pin_mask1bit;
+ u32 pin_mask2bits;
+ u32 new_mask2bits;
+ u32 tmp_val;
+
+ /* calculate pin location for single and 2 bits information */
+ pin_mask1bit = (u32) (1 << (QE_PIO_PINS - (pin + 1)));
+
+ /* Set open drain, if required */
+ tmp_val = in_be32(&par_io->cpodr);
+ if (open_drain)
+ out_be32(&par_io->cpodr, pin_mask1bit | tmp_val);
+ else
+ out_be32(&par_io->cpodr, ~pin_mask1bit & tmp_val);
+
+ /* define direction */
+ tmp_val = (pin > (QE_PIO_PINS / 2) - 1) ?
+ in_be32(&par_io->cpdir2) :
+ in_be32(&par_io->cpdir1);
+
+ /* get all bits mask for 2 bit per port */
+ pin_mask2bits = (u32) (0x3 << (QE_PIO_PINS -
+ (pin % (QE_PIO_PINS / 2) + 1) * 2));
+
+ /* Get the final mask we need for the right definition */
+ new_mask2bits = (u32) (dir << (QE_PIO_PINS -
+ (pin % (QE_PIO_PINS / 2) + 1) * 2));
+
+ /* clear and set 2 bits mask */
+ if (pin > (QE_PIO_PINS / 2) - 1) {
+ out_be32(&par_io->cpdir2,
+ ~pin_mask2bits & tmp_val);
+ tmp_val &= ~pin_mask2bits;
+ out_be32(&par_io->cpdir2, new_mask2bits | tmp_val);
+ } else {
+ out_be32(&par_io->cpdir1,
+ ~pin_mask2bits & tmp_val);
+ tmp_val &= ~pin_mask2bits;
+ out_be32(&par_io->cpdir1, new_mask2bits | tmp_val);
+ }
+ /* define pin assignment */
+ tmp_val = (pin > (QE_PIO_PINS / 2) - 1) ?
+ in_be32(&par_io->cppar2) :
+ in_be32(&par_io->cppar1);
+
+ new_mask2bits = (u32) (assignment << (QE_PIO_PINS -
+ (pin % (QE_PIO_PINS / 2) + 1) * 2));
+ /* clear and set 2 bits mask */
+ if (pin > (QE_PIO_PINS / 2) - 1) {
+ out_be32(&par_io->cppar2,
+ ~pin_mask2bits & tmp_val);
+ tmp_val &= ~pin_mask2bits;
+ out_be32(&par_io->cppar2, new_mask2bits | tmp_val);
+ } else {
+ out_be32(&par_io->cppar1,
+ ~pin_mask2bits & tmp_val);
+ tmp_val &= ~pin_mask2bits;
+ out_be32(&par_io->cppar1, new_mask2bits | tmp_val);
+ }
+}
+EXPORT_SYMBOL(__par_io_config_pin);
+
+int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
+ int assignment, int has_irq)
+{
+ if (!par_io || port >= num_par_io_ports)
+ return -EINVAL;
+
+ __par_io_config_pin(&par_io[port], pin, dir, open_drain, assignment,
+ has_irq);
+ return 0;
+}
+EXPORT_SYMBOL(par_io_config_pin);
+
+int par_io_data_set(u8 port, u8 pin, u8 val)
+{
+ u32 pin_mask, tmp_val;
+
+ if (port >= num_par_io_ports)
+ return -EINVAL;
+ if (pin >= QE_PIO_PINS)
+ return -EINVAL;
+ /* calculate pin location */
+ pin_mask = (u32) (1 << (QE_PIO_PINS - 1 - pin));
+
+ tmp_val = in_be32(&par_io[port].cpdata);
+
+ if (val == 0) /* clear */
+ out_be32(&par_io[port].cpdata, ~pin_mask & tmp_val);
+ else /* set */
+ out_be32(&par_io[port].cpdata, pin_mask | tmp_val);
+
+ return 0;
+}
+EXPORT_SYMBOL(par_io_data_set);
+
+int par_io_of_config(struct device_node *np)
+{
+ struct device_node *pio;
+ const phandle *ph;
+ int pio_map_len;
+ const unsigned int *pio_map;
+
+ if (par_io == NULL) {
+ printk(KERN_ERR "par_io not initialized\n");
+ return -1;
+ }
+
+ ph = of_get_property(np, "pio-handle", NULL);
+ if (ph == NULL) {
+ printk(KERN_ERR "pio-handle not available\n");
+ return -1;
+ }
+
+ pio = of_find_node_by_phandle(*ph);
+
+ pio_map = of_get_property(pio, "pio-map", &pio_map_len);
+ if (pio_map == NULL) {
+ printk(KERN_ERR "pio-map is not set!\n");
+ return -1;
+ }
+ pio_map_len /= sizeof(unsigned int);
+ if ((pio_map_len % 6) != 0) {
+ printk(KERN_ERR "pio-map format wrong!\n");
+ return -1;
+ }
+
+ while (pio_map_len > 0) {
+ par_io_config_pin((u8) pio_map[0], (u8) pio_map[1],
+ (int) pio_map[2], (int) pio_map[3],
+ (int) pio_map[4], (int) pio_map[5]);
+ pio_map += 6;
+ pio_map_len -= 6;
+ }
+ of_node_put(pio);
+ return 0;
+}
+EXPORT_SYMBOL(par_io_of_config);
+
+#ifdef DEBUG
+static void dump_par_io(void)
+{
+ unsigned int i;
+
+ printk(KERN_INFO "%s: par_io=%p\n", __func__, par_io);
+ for (i = 0; i < num_par_io_ports; i++) {
+ printk(KERN_INFO " cpodr[%u]=%08x\n", i,
+ in_be32(&par_io[i].cpodr));
+ printk(KERN_INFO " cpdata[%u]=%08x\n", i,
+ in_be32(&par_io[i].cpdata));
+ printk(KERN_INFO " cpdir1[%u]=%08x\n", i,
+ in_be32(&par_io[i].cpdir1));
+ printk(KERN_INFO " cpdir2[%u]=%08x\n", i,
+ in_be32(&par_io[i].cpdir2));
+ printk(KERN_INFO " cppar1[%u]=%08x\n", i,
+ in_be32(&par_io[i].cppar1));
+ printk(KERN_INFO " cppar2[%u]=%08x\n", i,
+ in_be32(&par_io[i].cppar2));
+ }
+
+}
+EXPORT_SYMBOL(dump_par_io);
+#endif /* DEBUG */
diff --git a/drivers/qe/ucc.c b/drivers/qe/ucc.c
new file mode 100644
index 0000000..23d23c7
--- /dev/null
+++ b/drivers/qe/ucc.c
@@ -0,0 +1,213 @@
+/*
+ * arch/powerpc/sysdev/qe_lib/ucc.c
+ *
+ * QE UCC API Set - UCC specific routines implementations.
+ *
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/stddef.h>
+#include <linux/spinlock.h>
+#include <linux/export.h>
+
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <qe/immap_qe.h>
+#include <qe/qe.h>
+#include <qe/ucc.h>
+
+int ucc_set_qe_mux_mii_mng(unsigned int ucc_num)
+{
+ unsigned long flags;
+
+ if (ucc_num > UCC_MAX_NUM - 1)
+ return -EINVAL;
+
+ spin_lock_irqsave(&cmxgcr_lock, flags);
+ clrsetbits_be32(&qe_immr->qmx.cmxgcr, QE_CMXGCR_MII_ENET_MNG,
+ ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT);
+ spin_unlock_irqrestore(&cmxgcr_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(ucc_set_qe_mux_mii_mng);
+
+/* Configure the UCC to either Slow or Fast.
+ *
+ * A given UCC can be figured to support either "slow" devices (e.g. UART)
+ * or "fast" devices (e.g. Ethernet).
+ *
+ * 'ucc_num' is the UCC number, from 0 - 7.
+ *
+ * This function also sets the UCC_GUEMR_SET_RESERVED3 bit because that bit
+ * must always be set to 1.
+ */
+int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed)
+{
+ u8 __iomem *guemr;
+
+ /* The GUEMR register is at the same location for both slow and fast
+ devices, so we just use uccX.slow.guemr. */
+ switch (ucc_num) {
+ case 0: guemr = &qe_immr->ucc1.slow.guemr;
+ break;
+ case 1: guemr = &qe_immr->ucc2.slow.guemr;
+ break;
+ case 2: guemr = &qe_immr->ucc3.slow.guemr;
+ break;
+ case 3: guemr = &qe_immr->ucc4.slow.guemr;
+ break;
+ case 4: guemr = &qe_immr->ucc5.slow.guemr;
+ break;
+ case 5: guemr = &qe_immr->ucc6.slow.guemr;
+ break;
+ case 6: guemr = &qe_immr->ucc7.slow.guemr;
+ break;
+ case 7: guemr = &qe_immr->ucc8.slow.guemr;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ clrsetbits_8(guemr, UCC_GUEMR_MODE_MASK,
+ UCC_GUEMR_SET_RESERVED3 | speed);
+
+ return 0;
+}
+
+static void get_cmxucr_reg(unsigned int ucc_num, __be32 __iomem **cmxucr,
+ unsigned int *reg_num, unsigned int *shift)
+{
+ unsigned int cmx = ((ucc_num & 1) << 1) + (ucc_num > 3);
+
+ *reg_num = cmx + 1;
+ *cmxucr = &qe_immr->qmx.cmxucr[cmx];
+ *shift = 16 - 8 * (ucc_num & 2);
+}
+
+int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask)
+{
+ __be32 __iomem *cmxucr;
+ unsigned int reg_num;
+ unsigned int shift;
+
+ /* check if the UCC number is in range. */
+ if (ucc_num > UCC_MAX_NUM - 1)
+ return -EINVAL;
+
+ get_cmxucr_reg(ucc_num, &cmxucr, ®_num, &shift);
+
+ if (set)
+ setbits32(cmxucr, mask << shift);
+ else
+ clrbits32(cmxucr, mask << shift);
+
+ return 0;
+}
+
+int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock,
+ enum comm_dir mode)
+{
+ __be32 __iomem *cmxucr;
+ unsigned int reg_num;
+ unsigned int shift;
+ u32 clock_bits = 0;
+
+ /* check if the UCC number is in range. */
+ if (ucc_num > UCC_MAX_NUM - 1)
+ return -EINVAL;
+
+ /* The communications direction must be RX or TX */
+ if (!((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX)))
+ return -EINVAL;
+
+ get_cmxucr_reg(ucc_num, &cmxucr, ®_num, &shift);
+
+ switch (reg_num) {
+ case 1:
+ switch (clock) {
+ case QE_BRG1: clock_bits = 1; break;
+ case QE_BRG2: clock_bits = 2; break;
+ case QE_BRG7: clock_bits = 3; break;
+ case QE_BRG8: clock_bits = 4; break;
+ case QE_CLK9: clock_bits = 5; break;
+ case QE_CLK10: clock_bits = 6; break;
+ case QE_CLK11: clock_bits = 7; break;
+ case QE_CLK12: clock_bits = 8; break;
+ case QE_CLK15: clock_bits = 9; break;
+ case QE_CLK16: clock_bits = 10; break;
+ default: break;
+ }
+ break;
+ case 2:
+ switch (clock) {
+ case QE_BRG5: clock_bits = 1; break;
+ case QE_BRG6: clock_bits = 2; break;
+ case QE_BRG7: clock_bits = 3; break;
+ case QE_BRG8: clock_bits = 4; break;
+ case QE_CLK13: clock_bits = 5; break;
+ case QE_CLK14: clock_bits = 6; break;
+ case QE_CLK19: clock_bits = 7; break;
+ case QE_CLK20: clock_bits = 8; break;
+ case QE_CLK15: clock_bits = 9; break;
+ case QE_CLK16: clock_bits = 10; break;
+ default: break;
+ }
+ break;
+ case 3:
+ switch (clock) {
+ case QE_BRG9: clock_bits = 1; break;
+ case QE_BRG10: clock_bits = 2; break;
+ case QE_BRG15: clock_bits = 3; break;
+ case QE_BRG16: clock_bits = 4; break;
+ case QE_CLK3: clock_bits = 5; break;
+ case QE_CLK4: clock_bits = 6; break;
+ case QE_CLK17: clock_bits = 7; break;
+ case QE_CLK18: clock_bits = 8; break;
+ case QE_CLK7: clock_bits = 9; break;
+ case QE_CLK8: clock_bits = 10; break;
+ case QE_CLK16: clock_bits = 11; break;
+ default: break;
+ }
+ break;
+ case 4:
+ switch (clock) {
+ case QE_BRG13: clock_bits = 1; break;
+ case QE_BRG14: clock_bits = 2; break;
+ case QE_BRG15: clock_bits = 3; break;
+ case QE_BRG16: clock_bits = 4; break;
+ case QE_CLK5: clock_bits = 5; break;
+ case QE_CLK6: clock_bits = 6; break;
+ case QE_CLK21: clock_bits = 7; break;
+ case QE_CLK22: clock_bits = 8; break;
+ case QE_CLK7: clock_bits = 9; break;
+ case QE_CLK8: clock_bits = 10; break;
+ case QE_CLK16: clock_bits = 11; break;
+ default: break;
+ }
+ break;
+ default: break;
+ }
+
+ /* Check for invalid combination of clock and UCC number */
+ if (!clock_bits)
+ return -ENOENT;
+
+ if (mode == COMM_DIR_RX)
+ shift += 4;
+
+ clrsetbits_be32(cmxucr, QE_CMXUCR_TX_CLK_SRC_MASK << shift,
+ clock_bits << shift);
+
+ return 0;
+}
diff --git a/drivers/qe/ucc_fast.c b/drivers/qe/ucc_fast.c
new file mode 100644
index 0000000..f7fd23e
--- /dev/null
+++ b/drivers/qe/ucc_fast.c
@@ -0,0 +1,364 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * QE UCC Fast API Set - UCC Fast specific routines implementations.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/export.h>
+
+#include <asm/io.h>
+#include <qe/immap_qe.h>
+#include <qe/qe.h>
+
+#include <qe/ucc.h>
+#include <qe/ucc_fast.h>
+
+void ucc_fast_dump_regs(struct ucc_fast_private * uccf)
+{
+ printk(KERN_INFO "UCC%u Fast registers:\n", uccf->uf_info->ucc_num);
+ printk(KERN_INFO "Base address: 0x%p\n", uccf->uf_regs);
+
+ printk(KERN_INFO "gumr : addr=0x%p, val=0x%08x\n",
+ &uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr));
+ printk(KERN_INFO "upsmr : addr=0x%p, val=0x%08x\n",
+ &uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr));
+ printk(KERN_INFO "utodr : addr=0x%p, val=0x%04x\n",
+ &uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr));
+ printk(KERN_INFO "udsr : addr=0x%p, val=0x%04x\n",
+ &uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr));
+ printk(KERN_INFO "ucce : addr=0x%p, val=0x%08x\n",
+ &uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce));
+ printk(KERN_INFO "uccm : addr=0x%p, val=0x%08x\n",
+ &uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm));
+ printk(KERN_INFO "uccs : addr=0x%p, val=0x%02x\n",
+ &uccf->uf_regs->uccs, in_8(&uccf->uf_regs->uccs));
+ printk(KERN_INFO "urfb : addr=0x%p, val=0x%08x\n",
+ &uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb));
+ printk(KERN_INFO "urfs : addr=0x%p, val=0x%04x\n",
+ &uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs));
+ printk(KERN_INFO "urfet : addr=0x%p, val=0x%04x\n",
+ &uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet));
+ printk(KERN_INFO "urfset: addr=0x%p, val=0x%04x\n",
+ &uccf->uf_regs->urfset, in_be16(&uccf->uf_regs->urfset));
+ printk(KERN_INFO "utfb : addr=0x%p, val=0x%08x\n",
+ &uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb));
+ printk(KERN_INFO "utfs : addr=0x%p, val=0x%04x\n",
+ &uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs));
+ printk(KERN_INFO "utfet : addr=0x%p, val=0x%04x\n",
+ &uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet));
+ printk(KERN_INFO "utftt : addr=0x%p, val=0x%04x\n",
+ &uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt));
+ printk(KERN_INFO "utpt : addr=0x%p, val=0x%04x\n",
+ &uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt));
+ printk(KERN_INFO "urtry : addr=0x%p, val=0x%08x\n",
+ &uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry));
+ printk(KERN_INFO "guemr : addr=0x%p, val=0x%02x\n",
+ &uccf->uf_regs->guemr, in_8(&uccf->uf_regs->guemr));
+}
+EXPORT_SYMBOL(ucc_fast_dump_regs);
+
+u32 ucc_fast_get_qe_cr_subblock(int uccf_num)
+{
+ switch (uccf_num) {
+ case 0: return QE_CR_SUBBLOCK_UCCFAST1;
+ case 1: return QE_CR_SUBBLOCK_UCCFAST2;
+ case 2: return QE_CR_SUBBLOCK_UCCFAST3;
+ case 3: return QE_CR_SUBBLOCK_UCCFAST4;
+ case 4: return QE_CR_SUBBLOCK_UCCFAST5;
+ case 5: return QE_CR_SUBBLOCK_UCCFAST6;
+ case 6: return QE_CR_SUBBLOCK_UCCFAST7;
+ case 7: return QE_CR_SUBBLOCK_UCCFAST8;
+ default: return QE_CR_SUBBLOCK_INVALID;
+ }
+}
+EXPORT_SYMBOL(ucc_fast_get_qe_cr_subblock);
+
+void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf)
+{
+ out_be16(&uccf->uf_regs->utodr, UCC_FAST_TOD);
+}
+EXPORT_SYMBOL(ucc_fast_transmit_on_demand);
+
+void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode)
+{
+ struct ucc_fast __iomem *uf_regs;
+ u32 gumr;
+
+ uf_regs = uccf->uf_regs;
+
+ /* Enable reception and/or transmission on this UCC. */
+ gumr = in_be32(&uf_regs->gumr);
+ if (mode & COMM_DIR_TX) {
+ gumr |= UCC_FAST_GUMR_ENT;
+ uccf->enabled_tx = 1;
+ }
+ if (mode & COMM_DIR_RX) {
+ gumr |= UCC_FAST_GUMR_ENR;
+ uccf->enabled_rx = 1;
+ }
+ out_be32(&uf_regs->gumr, gumr);
+}
+EXPORT_SYMBOL(ucc_fast_enable);
+
+void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode)
+{
+ struct ucc_fast __iomem *uf_regs;
+ u32 gumr;
+
+ uf_regs = uccf->uf_regs;
+
+ /* Disable reception and/or transmission on this UCC. */
+ gumr = in_be32(&uf_regs->gumr);
+ if (mode & COMM_DIR_TX) {
+ gumr &= ~UCC_FAST_GUMR_ENT;
+ uccf->enabled_tx = 0;
+ }
+ if (mode & COMM_DIR_RX) {
+ gumr &= ~UCC_FAST_GUMR_ENR;
+ uccf->enabled_rx = 0;
+ }
+ out_be32(&uf_regs->gumr, gumr);
+}
+EXPORT_SYMBOL(ucc_fast_disable);
+
+int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret)
+{
+ struct ucc_fast_private *uccf;
+ struct ucc_fast __iomem *uf_regs;
+ u32 gumr;
+ int ret;
+
+ if (!uf_info)
+ return -EINVAL;
+
+ /* check if the UCC port number is in range. */
+ if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) {
+ printk(KERN_ERR "%s: illegal UCC number\n", __func__);
+ return -EINVAL;
+ }
+
+ /* Check that 'max_rx_buf_length' is properly aligned (4). */
+ if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) {
+ printk(KERN_ERR "%s: max_rx_buf_length not aligned\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ /* Validate Virtual Fifo register values */
+ if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) {
+ printk(KERN_ERR "%s: urfs is too small\n", __func__);
+ return -EINVAL;
+ }
+
+ if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+ printk(KERN_ERR "%s: urfs is not aligned\n", __func__);
+ return -EINVAL;
+ }
+
+ if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+ printk(KERN_ERR "%s: urfet is not aligned.\n", __func__);
+ return -EINVAL;
+ }
+
+ if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+ printk(KERN_ERR "%s: urfset is not aligned\n", __func__);
+ return -EINVAL;
+ }
+
+ if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+ printk(KERN_ERR "%s: utfs is not aligned\n", __func__);
+ return -EINVAL;
+ }
+
+ if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+ printk(KERN_ERR "%s: utfet is not aligned\n", __func__);
+ return -EINVAL;
+ }
+
+ if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+ printk(KERN_ERR "%s: utftt is not aligned\n", __func__);
+ return -EINVAL;
+ }
+
+ uccf = kzalloc(sizeof(struct ucc_fast_private), GFP_KERNEL);
+ if (!uccf) {
+ printk(KERN_ERR "%s: Cannot allocate private data\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ /* Fill fast UCC structure */
+ uccf->uf_info = uf_info;
+ /* Set the PHY base address */
+ uccf->uf_regs = ioremap(uf_info->regs, sizeof(struct ucc_fast));
+ if (uccf->uf_regs == NULL) {
+ printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
+ kfree(uccf);
+ return -ENOMEM;
+ }
+
+ uccf->enabled_tx = 0;
+ uccf->enabled_rx = 0;
+ uccf->stopped_tx = 0;
+ uccf->stopped_rx = 0;
+ uf_regs = uccf->uf_regs;
+ uccf->p_ucce = &uf_regs->ucce;
+ uccf->p_uccm = &uf_regs->uccm;
+#ifdef CONFIG_UGETH_TX_ON_DEMAND
+ uccf->p_utodr = &uf_regs->utodr;
+#endif
+#ifdef STATISTICS
+ uccf->tx_frames = 0;
+ uccf->rx_frames = 0;
+ uccf->rx_discarded = 0;
+#endif /* STATISTICS */
+
+ /* Set UCC to fast type */
+ ret = ucc_set_type(uf_info->ucc_num, UCC_SPEED_TYPE_FAST);
+ if (ret) {
+ printk(KERN_ERR "%s: cannot set UCC type\n", __func__);
+ ucc_fast_free(uccf);
+ return ret;
+ }
+
+ uccf->mrblr = uf_info->max_rx_buf_length;
+
+ /* Set GUMR */
+ /* For more details see the hardware spec. */
+ gumr = uf_info->ttx_trx;
+ if (uf_info->tci)
+ gumr |= UCC_FAST_GUMR_TCI;
+ if (uf_info->cdp)
+ gumr |= UCC_FAST_GUMR_CDP;
+ if (uf_info->ctsp)
+ gumr |= UCC_FAST_GUMR_CTSP;
+ if (uf_info->cds)
+ gumr |= UCC_FAST_GUMR_CDS;
+ if (uf_info->ctss)
+ gumr |= UCC_FAST_GUMR_CTSS;
+ if (uf_info->txsy)
+ gumr |= UCC_FAST_GUMR_TXSY;
+ if (uf_info->rsyn)
+ gumr |= UCC_FAST_GUMR_RSYN;
+ gumr |= uf_info->synl;
+ if (uf_info->rtsm)
+ gumr |= UCC_FAST_GUMR_RTSM;
+ gumr |= uf_info->renc;
+ if (uf_info->revd)
+ gumr |= UCC_FAST_GUMR_REVD;
+ gumr |= uf_info->tenc;
+ gumr |= uf_info->tcrc;
+ gumr |= uf_info->mode;
+ out_be32(&uf_regs->gumr, gumr);
+
+ /* Allocate memory for Tx Virtual Fifo */
+ uccf->ucc_fast_tx_virtual_fifo_base_offset =
+ qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
+ if (IS_ERR_VALUE(uccf->ucc_fast_tx_virtual_fifo_base_offset)) {
+ printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO\n",
+ __func__);
+ uccf->ucc_fast_tx_virtual_fifo_base_offset = 0;
+ ucc_fast_free(uccf);
+ return -ENOMEM;
+ }
+
+ /* Allocate memory for Rx Virtual Fifo */
+ uccf->ucc_fast_rx_virtual_fifo_base_offset =
+ qe_muram_alloc(uf_info->urfs +
+ UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR,
+ UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
+ if (IS_ERR_VALUE(uccf->ucc_fast_rx_virtual_fifo_base_offset)) {
+ printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO\n",
+ __func__);
+ uccf->ucc_fast_rx_virtual_fifo_base_offset = 0;
+ ucc_fast_free(uccf);
+ return -ENOMEM;
+ }
+
+ /* Set Virtual Fifo registers */
+ out_be16(&uf_regs->urfs, uf_info->urfs);
+ out_be16(&uf_regs->urfet, uf_info->urfet);
+ out_be16(&uf_regs->urfset, uf_info->urfset);
+ out_be16(&uf_regs->utfs, uf_info->utfs);
+ out_be16(&uf_regs->utfet, uf_info->utfet);
+ out_be16(&uf_regs->utftt, uf_info->utftt);
+ /* utfb, urfb are offsets from MURAM base */
+ out_be32(&uf_regs->utfb, uccf->ucc_fast_tx_virtual_fifo_base_offset);
+ out_be32(&uf_regs->urfb, uccf->ucc_fast_rx_virtual_fifo_base_offset);
+
+ /* Mux clocking */
+ /* Grant Support */
+ ucc_set_qe_mux_grant(uf_info->ucc_num, uf_info->grant_support);
+ /* Breakpoint Support */
+ ucc_set_qe_mux_bkpt(uf_info->ucc_num, uf_info->brkpt_support);
+ /* Set Tsa or NMSI mode. */
+ ucc_set_qe_mux_tsa(uf_info->ucc_num, uf_info->tsa);
+ /* If NMSI (not Tsa), set Tx and Rx clock. */
+ if (!uf_info->tsa) {
+ /* Rx clock routing */
+ if ((uf_info->rx_clock != QE_CLK_NONE) &&
+ ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->rx_clock,
+ COMM_DIR_RX)) {
+ printk(KERN_ERR "%s: illegal value for RX clock\n",
+ __func__);
+ ucc_fast_free(uccf);
+ return -EINVAL;
+ }
+ /* Tx clock routing */
+ if ((uf_info->tx_clock != QE_CLK_NONE) &&
+ ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->tx_clock,
+ COMM_DIR_TX)) {
+ printk(KERN_ERR "%s: illegal value for TX clock\n",
+ __func__);
+ ucc_fast_free(uccf);
+ return -EINVAL;
+ }
+ }
+
+ /* Set interrupt mask register at UCC level. */
+ out_be32(&uf_regs->uccm, uf_info->uccm_mask);
+
+ /* First, clear anything pending at UCC level,
+ * otherwise, old garbage may come through
+ * as soon as the dam is opened. */
+
+ /* Writing '1' clears */
+ out_be32(&uf_regs->ucce, 0xffffffff);
+
+ *uccf_ret = uccf;
+ return 0;
+}
+EXPORT_SYMBOL(ucc_fast_init);
+
+void ucc_fast_free(struct ucc_fast_private * uccf)
+{
+ if (!uccf)
+ return;
+
+ if (uccf->ucc_fast_tx_virtual_fifo_base_offset)
+ qe_muram_free(uccf->ucc_fast_tx_virtual_fifo_base_offset);
+
+ if (uccf->ucc_fast_rx_virtual_fifo_base_offset)
+ qe_muram_free(uccf->ucc_fast_rx_virtual_fifo_base_offset);
+
+ if (uccf->uf_regs)
+ iounmap(uccf->uf_regs);
+
+ kfree(uccf);
+}
+EXPORT_SYMBOL(ucc_fast_free);
diff --git a/drivers/qe/ucc_slow.c b/drivers/qe/ucc_slow.c
new file mode 100644
index 0000000..a6108f1
--- /dev/null
+++ b/drivers/qe/ucc_slow.c
@@ -0,0 +1,380 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * QE UCC Slow API Set - UCC Slow specific routines implementations.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/export.h>
+
+#include <asm/io.h>
+#include <qe/immap_qe.h>
+#include <qe/qe.h>
+
+#include <qe/ucc.h>
+#include <qe/ucc_slow.h>
+
+u32 ucc_slow_get_qe_cr_subblock(int uccs_num)
+{
+ switch (uccs_num) {
+ case 0: return QE_CR_SUBBLOCK_UCCSLOW1;
+ case 1: return QE_CR_SUBBLOCK_UCCSLOW2;
+ case 2: return QE_CR_SUBBLOCK_UCCSLOW3;
+ case 3: return QE_CR_SUBBLOCK_UCCSLOW4;
+ case 4: return QE_CR_SUBBLOCK_UCCSLOW5;
+ case 5: return QE_CR_SUBBLOCK_UCCSLOW6;
+ case 6: return QE_CR_SUBBLOCK_UCCSLOW7;
+ case 7: return QE_CR_SUBBLOCK_UCCSLOW8;
+ default: return QE_CR_SUBBLOCK_INVALID;
+ }
+}
+EXPORT_SYMBOL(ucc_slow_get_qe_cr_subblock);
+
+void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs)
+{
+ out_be16(&uccs->us_regs->utodr, UCC_SLOW_TOD);
+}
+
+void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs)
+{
+ struct ucc_slow_info *us_info = uccs->us_info;
+ u32 id;
+
+ id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
+ qe_issue_cmd(QE_GRACEFUL_STOP_TX, id,
+ QE_CR_PROTOCOL_UNSPECIFIED, 0);
+}
+EXPORT_SYMBOL(ucc_slow_graceful_stop_tx);
+
+void ucc_slow_stop_tx(struct ucc_slow_private * uccs)
+{
+ struct ucc_slow_info *us_info = uccs->us_info;
+ u32 id;
+
+ id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
+ qe_issue_cmd(QE_STOP_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
+}
+EXPORT_SYMBOL(ucc_slow_stop_tx);
+
+void ucc_slow_restart_tx(struct ucc_slow_private * uccs)
+{
+ struct ucc_slow_info *us_info = uccs->us_info;
+ u32 id;
+
+ id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
+ qe_issue_cmd(QE_RESTART_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
+}
+EXPORT_SYMBOL(ucc_slow_restart_tx);
+
+void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode)
+{
+ struct ucc_slow *us_regs;
+ u32 gumr_l;
+
+ us_regs = uccs->us_regs;
+
+ /* Enable reception and/or transmission on this UCC. */
+ gumr_l = in_be32(&us_regs->gumr_l);
+ if (mode & COMM_DIR_TX) {
+ gumr_l |= UCC_SLOW_GUMR_L_ENT;
+ uccs->enabled_tx = 1;
+ }
+ if (mode & COMM_DIR_RX) {
+ gumr_l |= UCC_SLOW_GUMR_L_ENR;
+ uccs->enabled_rx = 1;
+ }
+ out_be32(&us_regs->gumr_l, gumr_l);
+}
+EXPORT_SYMBOL(ucc_slow_enable);
+
+void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode)
+{
+ struct ucc_slow *us_regs;
+ u32 gumr_l;
+
+ us_regs = uccs->us_regs;
+
+ /* Disable reception and/or transmission on this UCC. */
+ gumr_l = in_be32(&us_regs->gumr_l);
+ if (mode & COMM_DIR_TX) {
+ gumr_l &= ~UCC_SLOW_GUMR_L_ENT;
+ uccs->enabled_tx = 0;
+ }
+ if (mode & COMM_DIR_RX) {
+ gumr_l &= ~UCC_SLOW_GUMR_L_ENR;
+ uccs->enabled_rx = 0;
+ }
+ out_be32(&us_regs->gumr_l, gumr_l);
+}
+EXPORT_SYMBOL(ucc_slow_disable);
+
+/* Initialize the UCC for Slow operations
+ *
+ * The caller should initialize the following us_info
+ */
+int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret)
+{
+ struct ucc_slow_private *uccs;
+ u32 i;
+ struct ucc_slow __iomem *us_regs;
+ u32 gumr;
+ struct qe_bd *bd;
+ u32 id;
+ u32 command;
+ int ret = 0;
+
+ if (!us_info)
+ return -EINVAL;
+
+ /* check if the UCC port number is in range. */
+ if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) {
+ printk(KERN_ERR "%s: illegal UCC number\n", __func__);
+ return -EINVAL;
+ }
+
+ /*
+ * Set mrblr
+ * Check that 'max_rx_buf_length' is properly aligned (4), unless
+ * rfw is 1, meaning that QE accepts one byte at a time, unlike normal
+ * case when QE accepts 32 bits at a time.
+ */
+ if ((!us_info->rfw) &&
+ (us_info->max_rx_buf_length & (UCC_SLOW_MRBLR_ALIGNMENT - 1))) {
+ printk(KERN_ERR "max_rx_buf_length not aligned.\n");
+ return -EINVAL;
+ }
+
+ uccs = kzalloc(sizeof(struct ucc_slow_private), GFP_KERNEL);
+ if (!uccs) {
+ printk(KERN_ERR "%s: Cannot allocate private data\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ /* Fill slow UCC structure */
+ uccs->us_info = us_info;
+ /* Set the PHY base address */
+ uccs->us_regs = ioremap(us_info->regs, sizeof(struct ucc_slow));
+ if (uccs->us_regs == NULL) {
+ printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
+ kfree(uccs);
+ return -ENOMEM;
+ }
+
+ uccs->saved_uccm = 0;
+ uccs->p_rx_frame = 0;
+ us_regs = uccs->us_regs;
+ uccs->p_ucce = (u16 *) & (us_regs->ucce);
+ uccs->p_uccm = (u16 *) & (us_regs->uccm);
+#ifdef STATISTICS
+ uccs->rx_frames = 0;
+ uccs->tx_frames = 0;
+ uccs->rx_discarded = 0;
+#endif /* STATISTICS */
+
+ /* Get PRAM base */
+ uccs->us_pram_offset =
+ qe_muram_alloc(UCC_SLOW_PRAM_SIZE, ALIGNMENT_OF_UCC_SLOW_PRAM);
+ if (IS_ERR_VALUE(uccs->us_pram_offset)) {
+ printk(KERN_ERR "%s: cannot allocate MURAM for PRAM", __func__);
+ ucc_slow_free(uccs);
+ return -ENOMEM;
+ }
+ id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
+ qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, us_info->protocol,
+ uccs->us_pram_offset);
+
+ uccs->us_pram = qe_muram_addr(uccs->us_pram_offset);
+
+ /* Set UCC to slow type */
+ ret = ucc_set_type(us_info->ucc_num, UCC_SPEED_TYPE_SLOW);
+ if (ret) {
+ printk(KERN_ERR "%s: cannot set UCC type", __func__);
+ ucc_slow_free(uccs);
+ return ret;
+ }
+
+ out_be16(&uccs->us_pram->mrblr, us_info->max_rx_buf_length);
+
+ INIT_LIST_HEAD(&uccs->confQ);
+
+ /* Allocate BDs. */
+ uccs->rx_base_offset =
+ qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd),
+ QE_ALIGNMENT_OF_BD);
+ if (IS_ERR_VALUE(uccs->rx_base_offset)) {
+ printk(KERN_ERR "%s: cannot allocate %u RX BDs\n", __func__,
+ us_info->rx_bd_ring_len);
+ uccs->rx_base_offset = 0;
+ ucc_slow_free(uccs);
+ return -ENOMEM;
+ }
+
+ uccs->tx_base_offset =
+ qe_muram_alloc(us_info->tx_bd_ring_len * sizeof(struct qe_bd),
+ QE_ALIGNMENT_OF_BD);
+ if (IS_ERR_VALUE(uccs->tx_base_offset)) {
+ printk(KERN_ERR "%s: cannot allocate TX BDs", __func__);
+ uccs->tx_base_offset = 0;
+ ucc_slow_free(uccs);
+ return -ENOMEM;
+ }
+
+ /* Init Tx bds */
+ bd = uccs->confBd = uccs->tx_bd = qe_muram_addr(uccs->tx_base_offset);
+ for (i = 0; i < us_info->tx_bd_ring_len - 1; i++) {
+ /* clear bd buffer */
+ out_be32(&bd->buf, 0);
+ /* set bd status and length */
+ out_be32((u32 *) bd, 0);
+ bd++;
+ }
+ /* for last BD set Wrap bit */
+ out_be32(&bd->buf, 0);
+ out_be32((u32 *) bd, cpu_to_be32(T_W));
+
+ /* Init Rx bds */
+ bd = uccs->rx_bd = qe_muram_addr(uccs->rx_base_offset);
+ for (i = 0; i < us_info->rx_bd_ring_len - 1; i++) {
+ /* set bd status and length */
+ out_be32((u32*)bd, 0);
+ /* clear bd buffer */
+ out_be32(&bd->buf, 0);
+ bd++;
+ }
+ /* for last BD set Wrap bit */
+ out_be32((u32*)bd, cpu_to_be32(R_W));
+ out_be32(&bd->buf, 0);
+
+ /* Set GUMR (For more details see the hardware spec.). */
+ /* gumr_h */
+ gumr = us_info->tcrc;
+ if (us_info->cdp)
+ gumr |= UCC_SLOW_GUMR_H_CDP;
+ if (us_info->ctsp)
+ gumr |= UCC_SLOW_GUMR_H_CTSP;
+ if (us_info->cds)
+ gumr |= UCC_SLOW_GUMR_H_CDS;
+ if (us_info->ctss)
+ gumr |= UCC_SLOW_GUMR_H_CTSS;
+ if (us_info->tfl)
+ gumr |= UCC_SLOW_GUMR_H_TFL;
+ if (us_info->rfw)
+ gumr |= UCC_SLOW_GUMR_H_RFW;
+ if (us_info->txsy)
+ gumr |= UCC_SLOW_GUMR_H_TXSY;
+ if (us_info->rtsm)
+ gumr |= UCC_SLOW_GUMR_H_RTSM;
+ out_be32(&us_regs->gumr_h, gumr);
+
+ /* gumr_l */
+ gumr = us_info->tdcr | us_info->rdcr | us_info->tenc | us_info->renc |
+ us_info->diag | us_info->mode;
+ if (us_info->tci)
+ gumr |= UCC_SLOW_GUMR_L_TCI;
+ if (us_info->rinv)
+ gumr |= UCC_SLOW_GUMR_L_RINV;
+ if (us_info->tinv)
+ gumr |= UCC_SLOW_GUMR_L_TINV;
+ if (us_info->tend)
+ gumr |= UCC_SLOW_GUMR_L_TEND;
+ out_be32(&us_regs->gumr_l, gumr);
+
+ /* Function code registers */
+
+ /* if the data is in cachable memory, the 'global' */
+ /* in the function code should be set. */
+ uccs->us_pram->tbmr = UCC_BMR_BO_BE;
+ uccs->us_pram->rbmr = UCC_BMR_BO_BE;
+
+ /* rbase, tbase are offsets from MURAM base */
+ out_be16(&uccs->us_pram->rbase, uccs->rx_base_offset);
+ out_be16(&uccs->us_pram->tbase, uccs->tx_base_offset);
+
+ /* Mux clocking */
+ /* Grant Support */
+ ucc_set_qe_mux_grant(us_info->ucc_num, us_info->grant_support);
+ /* Breakpoint Support */
+ ucc_set_qe_mux_bkpt(us_info->ucc_num, us_info->brkpt_support);
+ /* Set Tsa or NMSI mode. */
+ ucc_set_qe_mux_tsa(us_info->ucc_num, us_info->tsa);
+ /* If NMSI (not Tsa), set Tx and Rx clock. */
+ if (!us_info->tsa) {
+ /* Rx clock routing */
+ if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->rx_clock,
+ COMM_DIR_RX)) {
+ printk(KERN_ERR "%s: illegal value for RX clock\n",
+ __func__);
+ ucc_slow_free(uccs);
+ return -EINVAL;
+ }
+ /* Tx clock routing */
+ if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->tx_clock,
+ COMM_DIR_TX)) {
+ printk(KERN_ERR "%s: illegal value for TX clock\n",
+ __func__);
+ ucc_slow_free(uccs);
+ return -EINVAL;
+ }
+ }
+
+ /* Set interrupt mask register at UCC level. */
+ out_be16(&us_regs->uccm, us_info->uccm_mask);
+
+ /* First, clear anything pending at UCC level,
+ * otherwise, old garbage may come through
+ * as soon as the dam is opened. */
+
+ /* Writing '1' clears */
+ out_be16(&us_regs->ucce, 0xffff);
+
+ /* Issue QE Init command */
+ if (us_info->init_tx && us_info->init_rx)
+ command = QE_INIT_TX_RX;
+ else if (us_info->init_tx)
+ command = QE_INIT_TX;
+ else
+ command = QE_INIT_RX; /* We know at least one is TRUE */
+
+ qe_issue_cmd(command, id, us_info->protocol, 0);
+
+ *uccs_ret = uccs;
+ return 0;
+}
+EXPORT_SYMBOL(ucc_slow_init);
+
+void ucc_slow_free(struct ucc_slow_private * uccs)
+{
+ if (!uccs)
+ return;
+
+ if (uccs->rx_base_offset)
+ qe_muram_free(uccs->rx_base_offset);
+
+ if (uccs->tx_base_offset)
+ qe_muram_free(uccs->tx_base_offset);
+
+ if (uccs->us_pram)
+ qe_muram_free(uccs->us_pram_offset);
+
+ if (uccs->us_regs)
+ iounmap(uccs->us_regs);
+
+ kfree(uccs);
+}
+EXPORT_SYMBOL(ucc_slow_free);
+
diff --git a/drivers/qe/usb.c b/drivers/qe/usb.c
new file mode 100644
index 0000000..ba1fc4c
--- /dev/null
+++ b/drivers/qe/usb.c
@@ -0,0 +1,56 @@
+/*
+ * QE USB routines
+ *
+ * Copyright 2006 Freescale Semiconductor, Inc.
+ * Shlomi Gridish <gridish@freescale.com>
+ * Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/export.h>
+#include <linux/io.h>
+#include <qe/immap_qe.h>
+#include <qe/qe.h>
+
+int qe_usb_clock_set(enum qe_clock clk, int rate)
+{
+ struct qe_mux __iomem *mux = &qe_immr->qmx;
+ unsigned long flags;
+ u32 val;
+
+ switch (clk) {
+ case QE_CLK3: val = QE_CMXGCR_USBCS_CLK3; break;
+ case QE_CLK5: val = QE_CMXGCR_USBCS_CLK5; break;
+ case QE_CLK7: val = QE_CMXGCR_USBCS_CLK7; break;
+ case QE_CLK9: val = QE_CMXGCR_USBCS_CLK9; break;
+ case QE_CLK13: val = QE_CMXGCR_USBCS_CLK13; break;
+ case QE_CLK17: val = QE_CMXGCR_USBCS_CLK17; break;
+ case QE_CLK19: val = QE_CMXGCR_USBCS_CLK19; break;
+ case QE_CLK21: val = QE_CMXGCR_USBCS_CLK21; break;
+ case QE_BRG9: val = QE_CMXGCR_USBCS_BRG9; break;
+ case QE_BRG10: val = QE_CMXGCR_USBCS_BRG10; break;
+ default:
+ pr_err("%s: requested unknown clock %d\n", __func__, clk);
+ return -EINVAL;
+ }
+
+ if (qe_clock_is_brg(clk))
+ qe_setbrg(clk, rate, 1);
+
+ spin_lock_irqsave(&cmxgcr_lock, flags);
+
+ clrsetbits_be32(&mux->cmxgcr, QE_CMXGCR_USBCS, val);
+
+ spin_unlock_irqrestore(&cmxgcr_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(qe_usb_clock_set);
diff --git a/drivers/spi/spi-fsl-cpm.c b/drivers/spi/spi-fsl-cpm.c
index 07971e3..b734c9e 100644
--- a/drivers/spi/spi-fsl-cpm.c
+++ b/drivers/spi/spi-fsl-cpm.c
@@ -21,7 +21,7 @@
#include <linux/fsl_devices.h>
#include <linux/dma-mapping.h>
#include <asm/cpm.h>
-#include <asm/qe.h>
+#include <qe/qe.h>
#include "spi-fsl-lib.h"
#include "spi-fsl-cpm.h"
diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index 8831748..e96e39f 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -29,7 +29,7 @@
#include <linux/dma-mapping.h>
#include <linux/fs_uart_pd.h>
-#include <asm/ucc_slow.h>
+#include <qe/ucc_slow.h>
#include <linux/firmware.h>
#include <asm/reg.h>
diff --git a/include/qe/immap_qe.h b/include/qe/immap_qe.h
new file mode 100644
index 0000000..bedbff8
--- /dev/null
+++ b/include/qe/immap_qe.h
@@ -0,0 +1,491 @@
+/*
+ * QUICC Engine (QE) Internal Memory Map.
+ * The Internal Memory Map for devices with QE on them. This
+ * is the superset of all QE devices (8360, etc.).
+
+ * Copyright (C) 2006. Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_IMMAP_QE_H
+#define _ASM_POWERPC_IMMAP_QE_H
+#ifdef __KERNEL__
+
+#include <linux/kernel.h>
+#include <asm/io.h>
+
+#define QE_IMMAP_SIZE (1024 * 1024) /* 1MB from 1MB+IMMR */
+
+/* QE I-RAM */
+struct qe_iram {
+ __be32 iadd; /* I-RAM Address Register */
+ __be32 idata; /* I-RAM Data Register */
+ u8 res0[0x04];
+ __be32 iready; /* I-RAM Ready Register */
+ u8 res1[0x70];
+} __attribute__ ((packed));
+
+/* QE Interrupt Controller */
+struct qe_ic_regs {
+ __be32 qicr;
+ __be32 qivec;
+ __be32 qripnr;
+ __be32 qipnr;
+ __be32 qipxcc;
+ __be32 qipycc;
+ __be32 qipwcc;
+ __be32 qipzcc;
+ __be32 qimr;
+ __be32 qrimr;
+ __be32 qicnr;
+ u8 res0[0x4];
+ __be32 qiprta;
+ __be32 qiprtb;
+ u8 res1[0x4];
+ __be32 qricr;
+ u8 res2[0x20];
+ __be32 qhivec;
+ u8 res3[0x1C];
+} __attribute__ ((packed));
+
+/* Communications Processor */
+struct cp_qe {
+ __be32 cecr; /* QE command register */
+ __be32 ceccr; /* QE controller configuration register */
+ __be32 cecdr; /* QE command data register */
+ u8 res0[0xA];
+ __be16 ceter; /* QE timer event register */
+ u8 res1[0x2];
+ __be16 cetmr; /* QE timers mask register */
+ __be32 cetscr; /* QE time-stamp timer control register */
+ __be32 cetsr1; /* QE time-stamp register 1 */
+ __be32 cetsr2; /* QE time-stamp register 2 */
+ u8 res2[0x8];
+ __be32 cevter; /* QE virtual tasks event register */
+ __be32 cevtmr; /* QE virtual tasks mask register */
+ __be16 cercr; /* QE RAM control register */
+ u8 res3[0x2];
+ u8 res4[0x24];
+ __be16 ceexe1; /* QE external request 1 event register */
+ u8 res5[0x2];
+ __be16 ceexm1; /* QE external request 1 mask register */
+ u8 res6[0x2];
+ __be16 ceexe2; /* QE external request 2 event register */
+ u8 res7[0x2];
+ __be16 ceexm2; /* QE external request 2 mask register */
+ u8 res8[0x2];
+ __be16 ceexe3; /* QE external request 3 event register */
+ u8 res9[0x2];
+ __be16 ceexm3; /* QE external request 3 mask register */
+ u8 res10[0x2];
+ __be16 ceexe4; /* QE external request 4 event register */
+ u8 res11[0x2];
+ __be16 ceexm4; /* QE external request 4 mask register */
+ u8 res12[0x3A];
+ __be32 ceurnr; /* QE microcode revision number register */
+ u8 res13[0x244];
+} __attribute__ ((packed));
+
+/* QE Multiplexer */
+struct qe_mux {
+ __be32 cmxgcr; /* CMX general clock route register */
+ __be32 cmxsi1cr_l; /* CMX SI1 clock route low register */
+ __be32 cmxsi1cr_h; /* CMX SI1 clock route high register */
+ __be32 cmxsi1syr; /* CMX SI1 SYNC route register */
+ __be32 cmxucr[4]; /* CMX UCCx clock route registers */
+ __be32 cmxupcr; /* CMX UPC clock route register */
+ u8 res0[0x1C];
+} __attribute__ ((packed));
+
+/* QE Timers */
+struct qe_timers {
+ u8 gtcfr1; /* Timer 1 and Timer 2 global config register*/
+ u8 res0[0x3];
+ u8 gtcfr2; /* Timer 3 and timer 4 global config register*/
+ u8 res1[0xB];
+ __be16 gtmdr1; /* Timer 1 mode register */
+ __be16 gtmdr2; /* Timer 2 mode register */
+ __be16 gtrfr1; /* Timer 1 reference register */
+ __be16 gtrfr2; /* Timer 2 reference register */
+ __be16 gtcpr1; /* Timer 1 capture register */
+ __be16 gtcpr2; /* Timer 2 capture register */
+ __be16 gtcnr1; /* Timer 1 counter */
+ __be16 gtcnr2; /* Timer 2 counter */
+ __be16 gtmdr3; /* Timer 3 mode register */
+ __be16 gtmdr4; /* Timer 4 mode register */
+ __be16 gtrfr3; /* Timer 3 reference register */
+ __be16 gtrfr4; /* Timer 4 reference register */
+ __be16 gtcpr3; /* Timer 3 capture register */
+ __be16 gtcpr4; /* Timer 4 capture register */
+ __be16 gtcnr3; /* Timer 3 counter */
+ __be16 gtcnr4; /* Timer 4 counter */
+ __be16 gtevr1; /* Timer 1 event register */
+ __be16 gtevr2; /* Timer 2 event register */
+ __be16 gtevr3; /* Timer 3 event register */
+ __be16 gtevr4; /* Timer 4 event register */
+ __be16 gtps; /* Timer 1 prescale register */
+ u8 res2[0x46];
+} __attribute__ ((packed));
+
+/* BRG */
+struct qe_brg {
+ __be32 brgc[16]; /* BRG configuration registers */
+ u8 res0[0x40];
+} __attribute__ ((packed));
+
+/* SPI */
+struct spi {
+ u8 res0[0x20];
+ __be32 spmode; /* SPI mode register */
+ u8 res1[0x2];
+ u8 spie; /* SPI event register */
+ u8 res2[0x1];
+ u8 res3[0x2];
+ u8 spim; /* SPI mask register */
+ u8 res4[0x1];
+ u8 res5[0x1];
+ u8 spcom; /* SPI command register */
+ u8 res6[0x2];
+ __be32 spitd; /* SPI transmit data register (cpu mode) */
+ __be32 spird; /* SPI receive data register (cpu mode) */
+ u8 res7[0x8];
+} __attribute__ ((packed));
+
+/* SI */
+struct si1 {
+ __be16 siamr1; /* SI1 TDMA mode register */
+ __be16 sibmr1; /* SI1 TDMB mode register */
+ __be16 sicmr1; /* SI1 TDMC mode register */
+ __be16 sidmr1; /* SI1 TDMD mode register */
+ u8 siglmr1_h; /* SI1 global mode register high */
+ u8 res0[0x1];
+ u8 sicmdr1_h; /* SI1 command register high */
+ u8 res2[0x1];
+ u8 sistr1_h; /* SI1 status register high */
+ u8 res3[0x1];
+ __be16 sirsr1_h; /* SI1 RAM shadow address register high */
+ u8 sitarc1; /* SI1 RAM counter Tx TDMA */
+ u8 sitbrc1; /* SI1 RAM counter Tx TDMB */
+ u8 sitcrc1; /* SI1 RAM counter Tx TDMC */
+ u8 sitdrc1; /* SI1 RAM counter Tx TDMD */
+ u8 sirarc1; /* SI1 RAM counter Rx TDMA */
+ u8 sirbrc1; /* SI1 RAM counter Rx TDMB */
+ u8 sircrc1; /* SI1 RAM counter Rx TDMC */
+ u8 sirdrc1; /* SI1 RAM counter Rx TDMD */
+ u8 res4[0x8];
+ __be16 siemr1; /* SI1 TDME mode register 16 bits */
+ __be16 sifmr1; /* SI1 TDMF mode register 16 bits */
+ __be16 sigmr1; /* SI1 TDMG mode register 16 bits */
+ __be16 sihmr1; /* SI1 TDMH mode register 16 bits */
+ u8 siglmg1_l; /* SI1 global mode register low 8 bits */
+ u8 res5[0x1];
+ u8 sicmdr1_l; /* SI1 command register low 8 bits */
+ u8 res6[0x1];
+ u8 sistr1_l; /* SI1 status register low 8 bits */
+ u8 res7[0x1];
+ __be16 sirsr1_l; /* SI1 RAM shadow address register low 16 bits*/
+ u8 siterc1; /* SI1 RAM counter Tx TDME 8 bits */
+ u8 sitfrc1; /* SI1 RAM counter Tx TDMF 8 bits */
+ u8 sitgrc1; /* SI1 RAM counter Tx TDMG 8 bits */
+ u8 sithrc1; /* SI1 RAM counter Tx TDMH 8 bits */
+ u8 sirerc1; /* SI1 RAM counter Rx TDME 8 bits */
+ u8 sirfrc1; /* SI1 RAM counter Rx TDMF 8 bits */
+ u8 sirgrc1; /* SI1 RAM counter Rx TDMG 8 bits */
+ u8 sirhrc1; /* SI1 RAM counter Rx TDMH 8 bits */
+ u8 res8[0x8];
+ __be32 siml1; /* SI1 multiframe limit register */
+ u8 siedm1; /* SI1 extended diagnostic mode register */
+ u8 res9[0xBB];
+} __attribute__ ((packed));
+
+/* SI Routing Tables */
+struct sir {
+ u8 tx[0x400];
+ u8 rx[0x400];
+ u8 res0[0x800];
+} __attribute__ ((packed));
+
+/* USB Controller */
+struct qe_usb_ctlr {
+ u8 usb_usmod;
+ u8 usb_usadr;
+ u8 usb_uscom;
+ u8 res1[1];
+ __be16 usb_usep[4];
+ u8 res2[4];
+ __be16 usb_usber;
+ u8 res3[2];
+ __be16 usb_usbmr;
+ u8 res4[1];
+ u8 usb_usbs;
+ __be16 usb_ussft;
+ u8 res5[2];
+ __be16 usb_usfrn;
+ u8 res6[0x22];
+} __attribute__ ((packed));
+
+/* MCC */
+struct qe_mcc {
+ __be32 mcce; /* MCC event register */
+ __be32 mccm; /* MCC mask register */
+ __be32 mccf; /* MCC configuration register */
+ __be32 merl; /* MCC emergency request level register */
+ u8 res0[0xF0];
+} __attribute__ ((packed));
+
+/* QE UCC Slow */
+struct ucc_slow {
+ __be32 gumr_l; /* UCCx general mode register (low) */
+ __be32 gumr_h; /* UCCx general mode register (high) */
+ __be16 upsmr; /* UCCx protocol-specific mode register */
+ u8 res0[0x2];
+ __be16 utodr; /* UCCx transmit on demand register */
+ __be16 udsr; /* UCCx data synchronization register */
+ __be16 ucce; /* UCCx event register */
+ u8 res1[0x2];
+ __be16 uccm; /* UCCx mask register */
+ u8 res2[0x1];
+ u8 uccs; /* UCCx status register */
+ u8 res3[0x24];
+ __be16 utpt;
+ u8 res4[0x52];
+ u8 guemr; /* UCC general extended mode register */
+} __attribute__ ((packed));
+
+/* QE UCC Fast */
+struct ucc_fast {
+ __be32 gumr; /* UCCx general mode register */
+ __be32 upsmr; /* UCCx protocol-specific mode register */
+ __be16 utodr; /* UCCx transmit on demand register */
+ u8 res0[0x2];
+ __be16 udsr; /* UCCx data synchronization register */
+ u8 res1[0x2];
+ __be32 ucce; /* UCCx event register */
+ __be32 uccm; /* UCCx mask register */
+ u8 uccs; /* UCCx status register */
+ u8 res2[0x7];
+ __be32 urfb; /* UCC receive FIFO base */
+ __be16 urfs; /* UCC receive FIFO size */
+ u8 res3[0x2];
+ __be16 urfet; /* UCC receive FIFO emergency threshold */
+ __be16 urfset; /* UCC receive FIFO special emergency
+ threshold */
+ __be32 utfb; /* UCC transmit FIFO base */
+ __be16 utfs; /* UCC transmit FIFO size */
+ u8 res4[0x2];
+ __be16 utfet; /* UCC transmit FIFO emergency threshold */
+ u8 res5[0x2];
+ __be16 utftt; /* UCC transmit FIFO transmit threshold */
+ u8 res6[0x2];
+ __be16 utpt; /* UCC transmit polling timer */
+ u8 res7[0x2];
+ __be32 urtry; /* UCC retry counter register */
+ u8 res8[0x4C];
+ u8 guemr; /* UCC general extended mode register */
+} __attribute__ ((packed));
+
+struct ucc {
+ union {
+ struct ucc_slow slow;
+ struct ucc_fast fast;
+ u8 res[0x200]; /* UCC blocks are 512 bytes each */
+ };
+} __attribute__ ((packed));
+
+/* MultiPHY UTOPIA POS Controllers (UPC) */
+struct upc {
+ __be32 upgcr; /* UTOPIA/POS general configuration register */
+ __be32 uplpa; /* UTOPIA/POS last PHY address */
+ __be32 uphec; /* ATM HEC register */
+ __be32 upuc; /* UTOPIA/POS UCC configuration */
+ __be32 updc1; /* UTOPIA/POS device 1 configuration */
+ __be32 updc2; /* UTOPIA/POS device 2 configuration */
+ __be32 updc3; /* UTOPIA/POS device 3 configuration */
+ __be32 updc4; /* UTOPIA/POS device 4 configuration */
+ __be32 upstpa; /* UTOPIA/POS STPA threshold */
+ u8 res0[0xC];
+ __be32 updrs1_h; /* UTOPIA/POS device 1 rate select */
+ __be32 updrs1_l; /* UTOPIA/POS device 1 rate select */
+ __be32 updrs2_h; /* UTOPIA/POS device 2 rate select */
+ __be32 updrs2_l; /* UTOPIA/POS device 2 rate select */
+ __be32 updrs3_h; /* UTOPIA/POS device 3 rate select */
+ __be32 updrs3_l; /* UTOPIA/POS device 3 rate select */
+ __be32 updrs4_h; /* UTOPIA/POS device 4 rate select */
+ __be32 updrs4_l; /* UTOPIA/POS device 4 rate select */
+ __be32 updrp1; /* UTOPIA/POS device 1 receive priority low */
+ __be32 updrp2; /* UTOPIA/POS device 2 receive priority low */
+ __be32 updrp3; /* UTOPIA/POS device 3 receive priority low */
+ __be32 updrp4; /* UTOPIA/POS device 4 receive priority low */
+ __be32 upde1; /* UTOPIA/POS device 1 event */
+ __be32 upde2; /* UTOPIA/POS device 2 event */
+ __be32 upde3; /* UTOPIA/POS device 3 event */
+ __be32 upde4; /* UTOPIA/POS device 4 event */
+ __be16 uprp1;
+ __be16 uprp2;
+ __be16 uprp3;
+ __be16 uprp4;
+ u8 res1[0x8];
+ __be16 uptirr1_0; /* Device 1 transmit internal rate 0 */
+ __be16 uptirr1_1; /* Device 1 transmit internal rate 1 */
+ __be16 uptirr1_2; /* Device 1 transmit internal rate 2 */
+ __be16 uptirr1_3; /* Device 1 transmit internal rate 3 */
+ __be16 uptirr2_0; /* Device 2 transmit internal rate 0 */
+ __be16 uptirr2_1; /* Device 2 transmit internal rate 1 */
+ __be16 uptirr2_2; /* Device 2 transmit internal rate 2 */
+ __be16 uptirr2_3; /* Device 2 transmit internal rate 3 */
+ __be16 uptirr3_0; /* Device 3 transmit internal rate 0 */
+ __be16 uptirr3_1; /* Device 3 transmit internal rate 1 */
+ __be16 uptirr3_2; /* Device 3 transmit internal rate 2 */
+ __be16 uptirr3_3; /* Device 3 transmit internal rate 3 */
+ __be16 uptirr4_0; /* Device 4 transmit internal rate 0 */
+ __be16 uptirr4_1; /* Device 4 transmit internal rate 1 */
+ __be16 uptirr4_2; /* Device 4 transmit internal rate 2 */
+ __be16 uptirr4_3; /* Device 4 transmit internal rate 3 */
+ __be32 uper1; /* Device 1 port enable register */
+ __be32 uper2; /* Device 2 port enable register */
+ __be32 uper3; /* Device 3 port enable register */
+ __be32 uper4; /* Device 4 port enable register */
+ u8 res2[0x150];
+} __attribute__ ((packed));
+
+/* SDMA */
+struct sdma {
+ __be32 sdsr; /* Serial DMA status register */
+ __be32 sdmr; /* Serial DMA mode register */
+ __be32 sdtr1; /* SDMA system bus threshold register */
+ __be32 sdtr2; /* SDMA secondary bus threshold register */
+ __be32 sdhy1; /* SDMA system bus hysteresis register */
+ __be32 sdhy2; /* SDMA secondary bus hysteresis register */
+ __be32 sdta1; /* SDMA system bus address register */
+ __be32 sdta2; /* SDMA secondary bus address register */
+ __be32 sdtm1; /* SDMA system bus MSNUM register */
+ __be32 sdtm2; /* SDMA secondary bus MSNUM register */
+ u8 res0[0x10];
+ __be32 sdaqr; /* SDMA address bus qualify register */
+ __be32 sdaqmr; /* SDMA address bus qualify mask register */
+ u8 res1[0x4];
+ __be32 sdebcr; /* SDMA CAM entries base register */
+ u8 res2[0x38];
+} __attribute__ ((packed));
+
+/* Debug Space */
+struct dbg {
+ __be32 bpdcr; /* Breakpoint debug command register */
+ __be32 bpdsr; /* Breakpoint debug status register */
+ __be32 bpdmr; /* Breakpoint debug mask register */
+ __be32 bprmrr0; /* Breakpoint request mode risc register 0 */
+ __be32 bprmrr1; /* Breakpoint request mode risc register 1 */
+ u8 res0[0x8];
+ __be32 bprmtr0; /* Breakpoint request mode trb register 0 */
+ __be32 bprmtr1; /* Breakpoint request mode trb register 1 */
+ u8 res1[0x8];
+ __be32 bprmir; /* Breakpoint request mode immediate register */
+ __be32 bprmsr; /* Breakpoint request mode serial register */
+ __be32 bpemr; /* Breakpoint exit mode register */
+ u8 res2[0x48];
+} __attribute__ ((packed));
+
+/*
+ * RISC Special Registers (Trap and Breakpoint). These are described in
+ * the QE Developer's Handbook.
+ */
+struct rsp {
+ __be32 tibcr[16]; /* Trap/instruction breakpoint control regs */
+ u8 res0[64];
+ __be32 ibcr0;
+ __be32 ibs0;
+ __be32 ibcnr0;
+ u8 res1[4];
+ __be32 ibcr1;
+ __be32 ibs1;
+ __be32 ibcnr1;
+ __be32 npcr;
+ __be32 dbcr;
+ __be32 dbar;
+ __be32 dbamr;
+ __be32 dbsr;
+ __be32 dbcnr;
+ u8 res2[12];
+ __be32 dbdr_h;
+ __be32 dbdr_l;
+ __be32 dbdmr_h;
+ __be32 dbdmr_l;
+ __be32 bsr;
+ __be32 bor;
+ __be32 bior;
+ u8 res3[4];
+ __be32 iatr[4];
+ __be32 eccr; /* Exception control configuration register */
+ __be32 eicr;
+ u8 res4[0x100-0xf8];
+} __attribute__ ((packed));
+
+struct qe_immap {
+ struct qe_iram iram; /* I-RAM */
+ struct qe_ic_regs ic; /* Interrupt Controller */
+ struct cp_qe cp; /* Communications Processor */
+ struct qe_mux qmx; /* QE Multiplexer */
+ struct qe_timers qet; /* QE Timers */
+ struct spi spi[0x2]; /* spi */
+ struct qe_mcc mcc; /* mcc */
+ struct qe_brg brg; /* brg */
+ struct qe_usb_ctlr usb; /* USB */
+ struct si1 si1; /* SI */
+ u8 res11[0x800];
+ struct sir sir; /* SI Routing Tables */
+ struct ucc ucc1; /* ucc1 */
+ struct ucc ucc3; /* ucc3 */
+ struct ucc ucc5; /* ucc5 */
+ struct ucc ucc7; /* ucc7 */
+ u8 res12[0x600];
+ struct upc upc1; /* MultiPHY UTOPIA POS Ctrlr 1*/
+ struct ucc ucc2; /* ucc2 */
+ struct ucc ucc4; /* ucc4 */
+ struct ucc ucc6; /* ucc6 */
+ struct ucc ucc8; /* ucc8 */
+ u8 res13[0x600];
+ struct upc upc2; /* MultiPHY UTOPIA POS Ctrlr 2*/
+ struct sdma sdma; /* SDMA */
+ struct dbg dbg; /* 0x104080 - 0x1040FF
+ Debug Space */
+ struct rsp rsp[0x2]; /* 0x104100 - 0x1042FF
+ RISC Special Registers
+ (Trap and Breakpoint) */
+ u8 res14[0x300]; /* 0x104300 - 0x1045FF */
+ u8 res15[0x3A00]; /* 0x104600 - 0x107FFF */
+ u8 res16[0x8000]; /* 0x108000 - 0x110000 */
+ u8 muram[0xC000]; /* 0x110000 - 0x11C000
+ Multi-user RAM */
+ u8 res17[0x24000]; /* 0x11C000 - 0x140000 */
+ u8 res18[0xC0000]; /* 0x140000 - 0x200000 */
+} __attribute__ ((packed));
+
+extern struct qe_immap __iomem *qe_immr;
+extern phys_addr_t get_qe_base(void);
+
+/*
+ * Returns the offset within the QE address space of the given pointer.
+ *
+ * Note that the QE does not support 36-bit physical addresses, so if
+ * get_qe_base() returns a number above 4GB, the caller will probably fail.
+ */
+static inline phys_addr_t immrbar_virt_to_phys(void *address)
+{
+ void *q = (void *)qe_immr;
+
+ /* Is it a MURAM address? */
+ if ((address >= q) && (address < (q + QE_IMMAP_SIZE)))
+ return get_qe_base() + (address - q);
+
+ /* It's an address returned by kmalloc */
+ return virt_to_phys(address);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_IMMAP_QE_H */
diff --git a/include/qe/qe.h b/include/qe/qe.h
new file mode 100644
index 0000000..d3c0236
--- /dev/null
+++ b/include/qe/qe.h
@@ -0,0 +1,794 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * QUICC Engine (QE) external definitions and structure.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_QE_H
+#define _ASM_POWERPC_QE_H
+#ifdef __KERNEL__
+
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <qe/immap_qe.h>
+
+#define QE_NUM_OF_SNUM 256 /* There are 256 serial number in QE */
+#define QE_NUM_OF_BRGS 16
+#define QE_NUM_OF_PORTS 1024
+
+/* Memory partitions
+*/
+#define MEM_PART_SYSTEM 0
+#define MEM_PART_SECONDARY 1
+#define MEM_PART_MURAM 2
+
+/* Clocks and BRGs */
+enum qe_clock {
+ QE_CLK_NONE = 0,
+ QE_BRG1, /* Baud Rate Generator 1 */
+ QE_BRG2, /* Baud Rate Generator 2 */
+ QE_BRG3, /* Baud Rate Generator 3 */
+ QE_BRG4, /* Baud Rate Generator 4 */
+ QE_BRG5, /* Baud Rate Generator 5 */
+ QE_BRG6, /* Baud Rate Generator 6 */
+ QE_BRG7, /* Baud Rate Generator 7 */
+ QE_BRG8, /* Baud Rate Generator 8 */
+ QE_BRG9, /* Baud Rate Generator 9 */
+ QE_BRG10, /* Baud Rate Generator 10 */
+ QE_BRG11, /* Baud Rate Generator 11 */
+ QE_BRG12, /* Baud Rate Generator 12 */
+ QE_BRG13, /* Baud Rate Generator 13 */
+ QE_BRG14, /* Baud Rate Generator 14 */
+ QE_BRG15, /* Baud Rate Generator 15 */
+ QE_BRG16, /* Baud Rate Generator 16 */
+ QE_CLK1, /* Clock 1 */
+ QE_CLK2, /* Clock 2 */
+ QE_CLK3, /* Clock 3 */
+ QE_CLK4, /* Clock 4 */
+ QE_CLK5, /* Clock 5 */
+ QE_CLK6, /* Clock 6 */
+ QE_CLK7, /* Clock 7 */
+ QE_CLK8, /* Clock 8 */
+ QE_CLK9, /* Clock 9 */
+ QE_CLK10, /* Clock 10 */
+ QE_CLK11, /* Clock 11 */
+ QE_CLK12, /* Clock 12 */
+ QE_CLK13, /* Clock 13 */
+ QE_CLK14, /* Clock 14 */
+ QE_CLK15, /* Clock 15 */
+ QE_CLK16, /* Clock 16 */
+ QE_CLK17, /* Clock 17 */
+ QE_CLK18, /* Clock 18 */
+ QE_CLK19, /* Clock 19 */
+ QE_CLK20, /* Clock 20 */
+ QE_CLK21, /* Clock 21 */
+ QE_CLK22, /* Clock 22 */
+ QE_CLK23, /* Clock 23 */
+ QE_CLK24, /* Clock 24 */
+ QE_CLK_DUMMY
+};
+
+static inline bool qe_clock_is_brg(enum qe_clock clk)
+{
+ return clk >= QE_BRG1 && clk <= QE_BRG16;
+}
+
+extern spinlock_t cmxgcr_lock;
+
+/* Export QE common operations */
+#ifdef CONFIG_QUICC_ENGINE
+extern void qe_reset(void);
+#else
+static inline void qe_reset(void) {}
+#endif
+
+/* QE PIO */
+#define QE_PIO_PINS 32
+
+struct qe_pio_regs {
+ __be32 cpodr; /* Open drain register */
+ __be32 cpdata; /* Data register */
+ __be32 cpdir1; /* Direction register */
+ __be32 cpdir2; /* Direction register */
+ __be32 cppar1; /* Pin assignment register */
+ __be32 cppar2; /* Pin assignment register */
+#ifdef CONFIG_PPC_85xx
+ u8 pad[8];
+#endif
+};
+
+#define QE_PIO_DIR_IN 2
+#define QE_PIO_DIR_OUT 1
+extern void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin,
+ int dir, int open_drain, int assignment,
+ int has_irq);
+#ifdef CONFIG_QUICC_ENGINE
+extern int par_io_init(struct device_node *np);
+extern int par_io_of_config(struct device_node *np);
+extern int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
+ int assignment, int has_irq);
+extern int par_io_data_set(u8 port, u8 pin, u8 val);
+#else
+static inline int par_io_init(struct device_node *np) { return -ENOSYS; }
+static inline int par_io_of_config(struct device_node *np) { return -ENOSYS; }
+static inline int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
+ int assignment, int has_irq) { return -ENOSYS; }
+static inline int par_io_data_set(u8 port, u8 pin, u8 val) { return -ENOSYS; }
+#endif /* CONFIG_QUICC_ENGINE */
+
+/*
+ * Pin multiplexing functions.
+ */
+struct qe_pin;
+#ifdef CONFIG_QE_GPIO
+extern struct qe_pin *qe_pin_request(struct device_node *np, int index);
+extern void qe_pin_free(struct qe_pin *qe_pin);
+extern void qe_pin_set_gpio(struct qe_pin *qe_pin);
+extern void qe_pin_set_dedicated(struct qe_pin *pin);
+#else
+static inline struct qe_pin *qe_pin_request(struct device_node *np, int index)
+{
+ return ERR_PTR(-ENOSYS);
+}
+static inline void qe_pin_free(struct qe_pin *qe_pin) {}
+static inline void qe_pin_set_gpio(struct qe_pin *qe_pin) {}
+static inline void qe_pin_set_dedicated(struct qe_pin *pin) {}
+#endif /* CONFIG_QE_GPIO */
+
+#ifdef CONFIG_QUICC_ENGINE
+int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input);
+#else
+static inline int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol,
+ u32 cmd_input)
+{
+ return -ENOSYS;
+}
+#endif /* CONFIG_QUICC_ENGINE */
+
+/* QE internal API */
+enum qe_clock qe_clock_source(const char *source);
+unsigned int qe_get_brg_clk(void);
+int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier);
+int qe_get_snum(void);
+void qe_put_snum(u8 snum);
+unsigned int qe_get_num_of_risc(void);
+unsigned int qe_get_num_of_snums(void);
+
+static inline int qe_alive_during_sleep(void)
+{
+ /*
+ * MPC8568E reference manual says:
+ *
+ * "...power down sequence waits for all I/O interfaces to become idle.
+ * In some applications this may happen eventually without actively
+ * shutting down interfaces, but most likely, software will have to
+ * take steps to shut down the eTSEC, QUICC Engine Block, and PCI
+ * interfaces before issuing the command (either the write to the core
+ * MSR[WE] as described above or writing to POWMGTCSR) to put the
+ * device into sleep state."
+ *
+ * MPC8569E reference manual has a similar paragraph.
+ */
+#ifdef CONFIG_PPC_85xx
+ return 0;
+#else
+ return 1;
+#endif
+}
+
+int qe_muram_init(void);
+
+#if defined(CONFIG_QUICC_ENGINE)
+unsigned long qe_muram_alloc(unsigned long size, unsigned long align);
+int qe_muram_free(unsigned long offset);
+unsigned long qe_muram_alloc_fixed(unsigned long offset, unsigned long size);
+void __iomem *qe_muram_addr(unsigned long offset);
+unsigned long qe_muram_offset(void __iomem *addr);
+dma_addr_t qe_muram_dma(void __iomem *addr);
+#else
+static inline unsigned long qe_muram_alloc(unsigned long size,
+ unsigned long align)
+{
+ return -ENOSYS;
+}
+
+static inline int qe_muram_free(unsigned long offset)
+{
+ return -ENOSYS;
+}
+
+static inline unsigned long qe_muram_alloc_fixed(unsigned long offset,
+ unsigned long size)
+{
+ return -ENOSYS;
+}
+
+static inline void __iomem *qe_muram_addr(unsigned long offset)
+{
+ return NULL;
+}
+
+static inline unsigned long qe_muram_offset(void __iomem *addr)
+{
+ return -ENOSYS;
+}
+
+static inline dma_addr_t qe_muram_dma(void __iomem *addr)
+{
+ return 0;
+}
+#endif /* defined(CONFIG_QUICC_ENGINE) */
+
+/* Structure that defines QE firmware binary files.
+ *
+ * See Documentation/powerpc/qe_firmware.txt for a description of these
+ * fields.
+ */
+struct qe_firmware {
+ struct qe_header {
+ __be32 length; /* Length of the entire structure, in bytes */
+ u8 magic[3]; /* Set to { 'Q', 'E', 'F' } */
+ u8 version; /* Version of this layout. First ver is '1' */
+ } header;
+ u8 id[62]; /* Null-terminated identifier string */
+ u8 split; /* 0 = shared I-RAM, 1 = split I-RAM */
+ u8 count; /* Number of microcode[] structures */
+ struct {
+ __be16 model; /* The SOC model */
+ u8 major; /* The SOC revision major */
+ u8 minor; /* The SOC revision minor */
+ } __attribute__ ((packed)) soc;
+ u8 padding[4]; /* Reserved, for alignment */
+ __be64 extended_modes; /* Extended modes */
+ __be32 vtraps[8]; /* Virtual trap addresses */
+ u8 reserved[4]; /* Reserved, for future expansion */
+ struct qe_microcode {
+ u8 id[32]; /* Null-terminated identifier */
+ __be32 traps[16]; /* Trap addresses, 0 == ignore */
+ __be32 eccr; /* The value for the ECCR register */
+ __be32 iram_offset; /* Offset into I-RAM for the code */
+ __be32 count; /* Number of 32-bit words of the code */
+ __be32 code_offset; /* Offset of the actual microcode */
+ u8 major; /* The microcode version major */
+ u8 minor; /* The microcode version minor */
+ u8 revision; /* The microcode version revision */
+ u8 padding; /* Reserved, for alignment */
+ u8 reserved[4]; /* Reserved, for future expansion */
+ } __attribute__ ((packed)) microcode[1];
+ /* All microcode binaries should be located here */
+ /* CRC32 should be located here, after the microcode binaries */
+} __attribute__ ((packed));
+
+struct qe_firmware_info {
+ char id[64]; /* Firmware name */
+ u32 vtraps[8]; /* Virtual trap addresses */
+ u64 extended_modes; /* Extended modes */
+};
+
+#ifdef CONFIG_QUICC_ENGINE
+/* Upload a firmware to the QE */
+int qe_upload_firmware(const struct qe_firmware *firmware);
+#else
+static inline int qe_upload_firmware(const struct qe_firmware *firmware)
+{
+ return -ENOSYS;
+}
+#endif /* CONFIG_QUICC_ENGINE */
+
+/* Obtain information on the uploaded firmware */
+struct qe_firmware_info *qe_get_firmware_info(void);
+
+/* QE USB */
+int qe_usb_clock_set(enum qe_clock clk, int rate);
+
+/* Buffer descriptors */
+struct qe_bd {
+ __be16 status;
+ __be16 length;
+ __be32 buf;
+} __attribute__ ((packed));
+
+#define BD_STATUS_MASK 0xffff0000
+#define BD_LENGTH_MASK 0x0000ffff
+
+/* Buffer descriptor control/status used by serial
+ */
+#define BD_SC_EMPTY (0x8000) /* Receive is empty */
+#define BD_SC_READY (0x8000) /* Transmit is ready */
+#define BD_SC_WRAP (0x2000) /* Last buffer descriptor */
+#define BD_SC_INTRPT (0x1000) /* Interrupt on change */
+#define BD_SC_LAST (0x0800) /* Last buffer in frame */
+#define BD_SC_TC (0x0400) /* Transmit CRC */
+#define BD_SC_CM (0x0200) /* Continuous mode */
+#define BD_SC_ID (0x0100) /* Rec'd too many idles */
+#define BD_SC_P (0x0100) /* xmt preamble */
+#define BD_SC_BR (0x0020) /* Break received */
+#define BD_SC_FR (0x0010) /* Framing error */
+#define BD_SC_PR (0x0008) /* Parity error */
+#define BD_SC_NAK (0x0004) /* NAK - did not respond */
+#define BD_SC_OV (0x0002) /* Overrun */
+#define BD_SC_UN (0x0002) /* Underrun */
+#define BD_SC_CD (0x0001) /* */
+#define BD_SC_CL (0x0001) /* Collision */
+
+/* Alignment */
+#define QE_INTR_TABLE_ALIGN 16 /* ??? */
+#define QE_ALIGNMENT_OF_BD 8
+#define QE_ALIGNMENT_OF_PRAM 64
+
+/* RISC allocation */
+#define QE_RISC_ALLOCATION_RISC1 0x1 /* RISC 1 */
+#define QE_RISC_ALLOCATION_RISC2 0x2 /* RISC 2 */
+#define QE_RISC_ALLOCATION_RISC3 0x4 /* RISC 3 */
+#define QE_RISC_ALLOCATION_RISC4 0x8 /* RISC 4 */
+#define QE_RISC_ALLOCATION_RISC1_AND_RISC2 (QE_RISC_ALLOCATION_RISC1 | \
+ QE_RISC_ALLOCATION_RISC2)
+#define QE_RISC_ALLOCATION_FOUR_RISCS (QE_RISC_ALLOCATION_RISC1 | \
+ QE_RISC_ALLOCATION_RISC2 | \
+ QE_RISC_ALLOCATION_RISC3 | \
+ QE_RISC_ALLOCATION_RISC4)
+
+/* QE extended filtering Table Lookup Key Size */
+enum qe_fltr_tbl_lookup_key_size {
+ QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES
+ = 0x3f, /* LookupKey parsed by the Generate LookupKey
+ CMD is truncated to 8 bytes */
+ QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES
+ = 0x5f, /* LookupKey parsed by the Generate LookupKey
+ CMD is truncated to 16 bytes */
+};
+
+/* QE FLTR extended filtering Largest External Table Lookup Key Size */
+enum qe_fltr_largest_external_tbl_lookup_key_size {
+ QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE
+ = 0x0,/* not used */
+ QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES
+ = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES, /* 8 bytes */
+ QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES
+ = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES, /* 16 bytes */
+};
+
+/* structure representing QE parameter RAM */
+struct qe_timer_tables {
+ u16 tm_base; /* QE timer table base adr */
+ u16 tm_ptr; /* QE timer table pointer */
+ u16 r_tmr; /* QE timer mode register */
+ u16 r_tmv; /* QE timer valid register */
+ u32 tm_cmd; /* QE timer cmd register */
+ u32 tm_cnt; /* QE timer internal cnt */
+} __attribute__ ((packed));
+
+#define QE_FLTR_TAD_SIZE 8
+
+/* QE extended filtering Termination Action Descriptor (TAD) */
+struct qe_fltr_tad {
+ u8 serialized[QE_FLTR_TAD_SIZE];
+} __attribute__ ((packed));
+
+/* Communication Direction */
+enum comm_dir {
+ COMM_DIR_NONE = 0,
+ COMM_DIR_RX = 1,
+ COMM_DIR_TX = 2,
+ COMM_DIR_RX_AND_TX = 3
+};
+
+/* QE CMXUCR Registers.
+ * There are two UCCs represented in each of the four CMXUCR registers.
+ * These values are for the UCC in the LSBs
+ */
+#define QE_CMXUCR_MII_ENET_MNG 0x00007000
+#define QE_CMXUCR_MII_ENET_MNG_SHIFT 12
+#define QE_CMXUCR_GRANT 0x00008000
+#define QE_CMXUCR_TSA 0x00004000
+#define QE_CMXUCR_BKPT 0x00000100
+#define QE_CMXUCR_TX_CLK_SRC_MASK 0x0000000F
+
+/* QE CMXGCR Registers.
+*/
+#define QE_CMXGCR_MII_ENET_MNG 0x00007000
+#define QE_CMXGCR_MII_ENET_MNG_SHIFT 12
+#define QE_CMXGCR_USBCS 0x0000000f
+#define QE_CMXGCR_USBCS_CLK3 0x1
+#define QE_CMXGCR_USBCS_CLK5 0x2
+#define QE_CMXGCR_USBCS_CLK7 0x3
+#define QE_CMXGCR_USBCS_CLK9 0x4
+#define QE_CMXGCR_USBCS_CLK13 0x5
+#define QE_CMXGCR_USBCS_CLK17 0x6
+#define QE_CMXGCR_USBCS_CLK19 0x7
+#define QE_CMXGCR_USBCS_CLK21 0x8
+#define QE_CMXGCR_USBCS_BRG9 0x9
+#define QE_CMXGCR_USBCS_BRG10 0xa
+
+/* QE CECR Commands.
+*/
+#define QE_CR_FLG 0x00010000
+#define QE_RESET 0x80000000
+#define QE_INIT_TX_RX 0x00000000
+#define QE_INIT_RX 0x00000001
+#define QE_INIT_TX 0x00000002
+#define QE_ENTER_HUNT_MODE 0x00000003
+#define QE_STOP_TX 0x00000004
+#define QE_GRACEFUL_STOP_TX 0x00000005
+#define QE_RESTART_TX 0x00000006
+#define QE_CLOSE_RX_BD 0x00000007
+#define QE_SWITCH_COMMAND 0x00000007
+#define QE_SET_GROUP_ADDRESS 0x00000008
+#define QE_START_IDMA 0x00000009
+#define QE_MCC_STOP_RX 0x00000009
+#define QE_ATM_TRANSMIT 0x0000000a
+#define QE_HPAC_CLEAR_ALL 0x0000000b
+#define QE_GRACEFUL_STOP_RX 0x0000001a
+#define QE_RESTART_RX 0x0000001b
+#define QE_HPAC_SET_PRIORITY 0x0000010b
+#define QE_HPAC_STOP_TX 0x0000020b
+#define QE_HPAC_STOP_RX 0x0000030b
+#define QE_HPAC_GRACEFUL_STOP_TX 0x0000040b
+#define QE_HPAC_GRACEFUL_STOP_RX 0x0000050b
+#define QE_HPAC_START_TX 0x0000060b
+#define QE_HPAC_START_RX 0x0000070b
+#define QE_USB_STOP_TX 0x0000000a
+#define QE_USB_RESTART_TX 0x0000000c
+#define QE_QMC_STOP_TX 0x0000000c
+#define QE_QMC_STOP_RX 0x0000000d
+#define QE_SS7_SU_FIL_RESET 0x0000000e
+/* jonathbr added from here down for 83xx */
+#define QE_RESET_BCS 0x0000000a
+#define QE_MCC_INIT_TX_RX_16 0x00000003
+#define QE_MCC_STOP_TX 0x00000004
+#define QE_MCC_INIT_TX_1 0x00000005
+#define QE_MCC_INIT_RX_1 0x00000006
+#define QE_MCC_RESET 0x00000007
+#define QE_SET_TIMER 0x00000008
+#define QE_RANDOM_NUMBER 0x0000000c
+#define QE_ATM_MULTI_THREAD_INIT 0x00000011
+#define QE_ASSIGN_PAGE 0x00000012
+#define QE_ADD_REMOVE_HASH_ENTRY 0x00000013
+#define QE_START_FLOW_CONTROL 0x00000014
+#define QE_STOP_FLOW_CONTROL 0x00000015
+#define QE_ASSIGN_PAGE_TO_DEVICE 0x00000016
+
+#define QE_ASSIGN_RISC 0x00000010
+#define QE_CR_MCN_NORMAL_SHIFT 6
+#define QE_CR_MCN_USB_SHIFT 4
+#define QE_CR_MCN_RISC_ASSIGN_SHIFT 8
+#define QE_CR_SNUM_SHIFT 17
+
+/* QE CECR Sub Block - sub block of QE command.
+*/
+#define QE_CR_SUBBLOCK_INVALID 0x00000000
+#define QE_CR_SUBBLOCK_USB 0x03200000
+#define QE_CR_SUBBLOCK_UCCFAST1 0x02000000
+#define QE_CR_SUBBLOCK_UCCFAST2 0x02200000
+#define QE_CR_SUBBLOCK_UCCFAST3 0x02400000
+#define QE_CR_SUBBLOCK_UCCFAST4 0x02600000
+#define QE_CR_SUBBLOCK_UCCFAST5 0x02800000
+#define QE_CR_SUBBLOCK_UCCFAST6 0x02a00000
+#define QE_CR_SUBBLOCK_UCCFAST7 0x02c00000
+#define QE_CR_SUBBLOCK_UCCFAST8 0x02e00000
+#define QE_CR_SUBBLOCK_UCCSLOW1 0x00000000
+#define QE_CR_SUBBLOCK_UCCSLOW2 0x00200000
+#define QE_CR_SUBBLOCK_UCCSLOW3 0x00400000
+#define QE_CR_SUBBLOCK_UCCSLOW4 0x00600000
+#define QE_CR_SUBBLOCK_UCCSLOW5 0x00800000
+#define QE_CR_SUBBLOCK_UCCSLOW6 0x00a00000
+#define QE_CR_SUBBLOCK_UCCSLOW7 0x00c00000
+#define QE_CR_SUBBLOCK_UCCSLOW8 0x00e00000
+#define QE_CR_SUBBLOCK_MCC1 0x03800000
+#define QE_CR_SUBBLOCK_MCC2 0x03a00000
+#define QE_CR_SUBBLOCK_MCC3 0x03000000
+#define QE_CR_SUBBLOCK_IDMA1 0x02800000
+#define QE_CR_SUBBLOCK_IDMA2 0x02a00000
+#define QE_CR_SUBBLOCK_IDMA3 0x02c00000
+#define QE_CR_SUBBLOCK_IDMA4 0x02e00000
+#define QE_CR_SUBBLOCK_HPAC 0x01e00000
+#define QE_CR_SUBBLOCK_SPI1 0x01400000
+#define QE_CR_SUBBLOCK_SPI2 0x01600000
+#define QE_CR_SUBBLOCK_RAND 0x01c00000
+#define QE_CR_SUBBLOCK_TIMER 0x01e00000
+#define QE_CR_SUBBLOCK_GENERAL 0x03c00000
+
+/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command */
+#define QE_CR_PROTOCOL_UNSPECIFIED 0x00 /* For all other protocols */
+#define QE_CR_PROTOCOL_HDLC_TRANSPARENT 0x00
+#define QE_CR_PROTOCOL_QMC 0x02
+#define QE_CR_PROTOCOL_UART 0x04
+#define QE_CR_PROTOCOL_ATM_POS 0x0A
+#define QE_CR_PROTOCOL_ETHERNET 0x0C
+#define QE_CR_PROTOCOL_L2_SWITCH 0x0D
+
+/* BRG configuration register */
+#define QE_BRGC_ENABLE 0x00010000
+#define QE_BRGC_DIVISOR_SHIFT 1
+#define QE_BRGC_DIVISOR_MAX 0xFFF
+#define QE_BRGC_DIV16 1
+
+/* QE Timers registers */
+#define QE_GTCFR1_PCAS 0x80
+#define QE_GTCFR1_STP2 0x20
+#define QE_GTCFR1_RST2 0x10
+#define QE_GTCFR1_GM2 0x08
+#define QE_GTCFR1_GM1 0x04
+#define QE_GTCFR1_STP1 0x02
+#define QE_GTCFR1_RST1 0x01
+
+/* SDMA registers */
+#define QE_SDSR_BER1 0x02000000
+#define QE_SDSR_BER2 0x01000000
+
+#define QE_SDMR_GLB_1_MSK 0x80000000
+#define QE_SDMR_ADR_SEL 0x20000000
+#define QE_SDMR_BER1_MSK 0x02000000
+#define QE_SDMR_BER2_MSK 0x01000000
+#define QE_SDMR_EB1_MSK 0x00800000
+#define QE_SDMR_ER1_MSK 0x00080000
+#define QE_SDMR_ER2_MSK 0x00040000
+#define QE_SDMR_CEN_MASK 0x0000E000
+#define QE_SDMR_SBER_1 0x00000200
+#define QE_SDMR_SBER_2 0x00000200
+#define QE_SDMR_EB1_PR_MASK 0x000000C0
+#define QE_SDMR_ER1_PR 0x00000008
+
+#define QE_SDMR_CEN_SHIFT 13
+#define QE_SDMR_EB1_PR_SHIFT 6
+
+#define QE_SDTM_MSNUM_SHIFT 24
+
+#define QE_SDEBCR_BA_MASK 0x01FFFFFF
+
+/* Communication Processor */
+#define QE_CP_CERCR_MEE 0x8000 /* Multi-user RAM ECC enable */
+#define QE_CP_CERCR_IEE 0x4000 /* Instruction RAM ECC enable */
+#define QE_CP_CERCR_CIR 0x0800 /* Common instruction RAM */
+
+/* I-RAM */
+#define QE_IRAM_IADD_AIE 0x80000000 /* Auto Increment Enable */
+#define QE_IRAM_IADD_BADDR 0x00080000 /* Base Address */
+#define QE_IRAM_READY 0x80000000 /* Ready */
+
+/* UPC */
+#define UPGCR_PROTOCOL 0x80000000 /* protocol ul2 or pl2 */
+#define UPGCR_TMS 0x40000000 /* Transmit master/slave mode */
+#define UPGCR_RMS 0x20000000 /* Receive master/slave mode */
+#define UPGCR_ADDR 0x10000000 /* Master MPHY Addr multiplexing */
+#define UPGCR_DIAG 0x01000000 /* Diagnostic mode */
+
+/* UCC GUEMR register */
+#define UCC_GUEMR_MODE_MASK_RX 0x02
+#define UCC_GUEMR_MODE_FAST_RX 0x02
+#define UCC_GUEMR_MODE_SLOW_RX 0x00
+#define UCC_GUEMR_MODE_MASK_TX 0x01
+#define UCC_GUEMR_MODE_FAST_TX 0x01
+#define UCC_GUEMR_MODE_SLOW_TX 0x00
+#define UCC_GUEMR_MODE_MASK (UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX)
+#define UCC_GUEMR_SET_RESERVED3 0x10 /* Bit 3 in the guemr is reserved but
+ must be set 1 */
+
+/* structure representing UCC SLOW parameter RAM */
+struct ucc_slow_pram {
+ __be16 rbase; /* RX BD base address */
+ __be16 tbase; /* TX BD base address */
+ u8 rbmr; /* RX bus mode register (same as CPM's RFCR) */
+ u8 tbmr; /* TX bus mode register (same as CPM's TFCR) */
+ __be16 mrblr; /* Rx buffer length */
+ __be32 rstate; /* Rx internal state */
+ __be32 rptr; /* Rx internal data pointer */
+ __be16 rbptr; /* rb BD Pointer */
+ __be16 rcount; /* Rx internal byte count */
+ __be32 rtemp; /* Rx temp */
+ __be32 tstate; /* Tx internal state */
+ __be32 tptr; /* Tx internal data pointer */
+ __be16 tbptr; /* Tx BD pointer */
+ __be16 tcount; /* Tx byte count */
+ __be32 ttemp; /* Tx temp */
+ __be32 rcrc; /* temp receive CRC */
+ __be32 tcrc; /* temp transmit CRC */
+} __attribute__ ((packed));
+
+/* General UCC SLOW Mode Register (GUMRH & GUMRL) */
+#define UCC_SLOW_GUMR_H_SAM_QMC 0x00000000
+#define UCC_SLOW_GUMR_H_SAM_SATM 0x00008000
+#define UCC_SLOW_GUMR_H_REVD 0x00002000
+#define UCC_SLOW_GUMR_H_TRX 0x00001000
+#define UCC_SLOW_GUMR_H_TTX 0x00000800
+#define UCC_SLOW_GUMR_H_CDP 0x00000400
+#define UCC_SLOW_GUMR_H_CTSP 0x00000200
+#define UCC_SLOW_GUMR_H_CDS 0x00000100
+#define UCC_SLOW_GUMR_H_CTSS 0x00000080
+#define UCC_SLOW_GUMR_H_TFL 0x00000040
+#define UCC_SLOW_GUMR_H_RFW 0x00000020
+#define UCC_SLOW_GUMR_H_TXSY 0x00000010
+#define UCC_SLOW_GUMR_H_4SYNC 0x00000004
+#define UCC_SLOW_GUMR_H_8SYNC 0x00000008
+#define UCC_SLOW_GUMR_H_16SYNC 0x0000000c
+#define UCC_SLOW_GUMR_H_RTSM 0x00000002
+#define UCC_SLOW_GUMR_H_RSYN 0x00000001
+
+#define UCC_SLOW_GUMR_L_TCI 0x10000000
+#define UCC_SLOW_GUMR_L_RINV 0x02000000
+#define UCC_SLOW_GUMR_L_TINV 0x01000000
+#define UCC_SLOW_GUMR_L_TEND 0x00040000
+#define UCC_SLOW_GUMR_L_TDCR_MASK 0x00030000
+#define UCC_SLOW_GUMR_L_TDCR_32 0x00030000
+#define UCC_SLOW_GUMR_L_TDCR_16 0x00020000
+#define UCC_SLOW_GUMR_L_TDCR_8 0x00010000
+#define UCC_SLOW_GUMR_L_TDCR_1 0x00000000
+#define UCC_SLOW_GUMR_L_RDCR_MASK 0x0000c000
+#define UCC_SLOW_GUMR_L_RDCR_32 0x0000c000
+#define UCC_SLOW_GUMR_L_RDCR_16 0x00008000
+#define UCC_SLOW_GUMR_L_RDCR_8 0x00004000
+#define UCC_SLOW_GUMR_L_RDCR_1 0x00000000
+#define UCC_SLOW_GUMR_L_RENC_NRZI 0x00000800
+#define UCC_SLOW_GUMR_L_RENC_NRZ 0x00000000
+#define UCC_SLOW_GUMR_L_TENC_NRZI 0x00000100
+#define UCC_SLOW_GUMR_L_TENC_NRZ 0x00000000
+#define UCC_SLOW_GUMR_L_DIAG_MASK 0x000000c0
+#define UCC_SLOW_GUMR_L_DIAG_LE 0x000000c0
+#define UCC_SLOW_GUMR_L_DIAG_ECHO 0x00000080
+#define UCC_SLOW_GUMR_L_DIAG_LOOP 0x00000040
+#define UCC_SLOW_GUMR_L_DIAG_NORM 0x00000000
+#define UCC_SLOW_GUMR_L_ENR 0x00000020
+#define UCC_SLOW_GUMR_L_ENT 0x00000010
+#define UCC_SLOW_GUMR_L_MODE_MASK 0x0000000F
+#define UCC_SLOW_GUMR_L_MODE_BISYNC 0x00000008
+#define UCC_SLOW_GUMR_L_MODE_AHDLC 0x00000006
+#define UCC_SLOW_GUMR_L_MODE_UART 0x00000004
+#define UCC_SLOW_GUMR_L_MODE_QMC 0x00000002
+
+/* General UCC FAST Mode Register */
+#define UCC_FAST_GUMR_TCI 0x20000000
+#define UCC_FAST_GUMR_TRX 0x10000000
+#define UCC_FAST_GUMR_TTX 0x08000000
+#define UCC_FAST_GUMR_CDP 0x04000000
+#define UCC_FAST_GUMR_CTSP 0x02000000
+#define UCC_FAST_GUMR_CDS 0x01000000
+#define UCC_FAST_GUMR_CTSS 0x00800000
+#define UCC_FAST_GUMR_TXSY 0x00020000
+#define UCC_FAST_GUMR_RSYN 0x00010000
+#define UCC_FAST_GUMR_RTSM 0x00002000
+#define UCC_FAST_GUMR_REVD 0x00000400
+#define UCC_FAST_GUMR_ENR 0x00000020
+#define UCC_FAST_GUMR_ENT 0x00000010
+
+/* UART Slow UCC Event Register (UCCE) */
+#define UCC_UART_UCCE_AB 0x0200
+#define UCC_UART_UCCE_IDLE 0x0100
+#define UCC_UART_UCCE_GRA 0x0080
+#define UCC_UART_UCCE_BRKE 0x0040
+#define UCC_UART_UCCE_BRKS 0x0020
+#define UCC_UART_UCCE_CCR 0x0008
+#define UCC_UART_UCCE_BSY 0x0004
+#define UCC_UART_UCCE_TX 0x0002
+#define UCC_UART_UCCE_RX 0x0001
+
+/* HDLC Slow UCC Event Register (UCCE) */
+#define UCC_HDLC_UCCE_GLR 0x1000
+#define UCC_HDLC_UCCE_GLT 0x0800
+#define UCC_HDLC_UCCE_IDLE 0x0100
+#define UCC_HDLC_UCCE_BRKE 0x0040
+#define UCC_HDLC_UCCE_BRKS 0x0020
+#define UCC_HDLC_UCCE_TXE 0x0010
+#define UCC_HDLC_UCCE_RXF 0x0008
+#define UCC_HDLC_UCCE_BSY 0x0004
+#define UCC_HDLC_UCCE_TXB 0x0002
+#define UCC_HDLC_UCCE_RXB 0x0001
+
+/* BISYNC Slow UCC Event Register (UCCE) */
+#define UCC_BISYNC_UCCE_GRA 0x0080
+#define UCC_BISYNC_UCCE_TXE 0x0010
+#define UCC_BISYNC_UCCE_RCH 0x0008
+#define UCC_BISYNC_UCCE_BSY 0x0004
+#define UCC_BISYNC_UCCE_TXB 0x0002
+#define UCC_BISYNC_UCCE_RXB 0x0001
+
+/* Gigabit Ethernet Fast UCC Event Register (UCCE) */
+#define UCC_GETH_UCCE_MPD 0x80000000
+#define UCC_GETH_UCCE_SCAR 0x40000000
+#define UCC_GETH_UCCE_GRA 0x20000000
+#define UCC_GETH_UCCE_CBPR 0x10000000
+#define UCC_GETH_UCCE_BSY 0x08000000
+#define UCC_GETH_UCCE_RXC 0x04000000
+#define UCC_GETH_UCCE_TXC 0x02000000
+#define UCC_GETH_UCCE_TXE 0x01000000
+#define UCC_GETH_UCCE_TXB7 0x00800000
+#define UCC_GETH_UCCE_TXB6 0x00400000
+#define UCC_GETH_UCCE_TXB5 0x00200000
+#define UCC_GETH_UCCE_TXB4 0x00100000
+#define UCC_GETH_UCCE_TXB3 0x00080000
+#define UCC_GETH_UCCE_TXB2 0x00040000
+#define UCC_GETH_UCCE_TXB1 0x00020000
+#define UCC_GETH_UCCE_TXB0 0x00010000
+#define UCC_GETH_UCCE_RXB7 0x00008000
+#define UCC_GETH_UCCE_RXB6 0x00004000
+#define UCC_GETH_UCCE_RXB5 0x00002000
+#define UCC_GETH_UCCE_RXB4 0x00001000
+#define UCC_GETH_UCCE_RXB3 0x00000800
+#define UCC_GETH_UCCE_RXB2 0x00000400
+#define UCC_GETH_UCCE_RXB1 0x00000200
+#define UCC_GETH_UCCE_RXB0 0x00000100
+#define UCC_GETH_UCCE_RXF7 0x00000080
+#define UCC_GETH_UCCE_RXF6 0x00000040
+#define UCC_GETH_UCCE_RXF5 0x00000020
+#define UCC_GETH_UCCE_RXF4 0x00000010
+#define UCC_GETH_UCCE_RXF3 0x00000008
+#define UCC_GETH_UCCE_RXF2 0x00000004
+#define UCC_GETH_UCCE_RXF1 0x00000002
+#define UCC_GETH_UCCE_RXF0 0x00000001
+
+/* UCC Protocol Specific Mode Register (UPSMR), when used for UART */
+#define UCC_UART_UPSMR_FLC 0x8000
+#define UCC_UART_UPSMR_SL 0x4000
+#define UCC_UART_UPSMR_CL_MASK 0x3000
+#define UCC_UART_UPSMR_CL_8 0x3000
+#define UCC_UART_UPSMR_CL_7 0x2000
+#define UCC_UART_UPSMR_CL_6 0x1000
+#define UCC_UART_UPSMR_CL_5 0x0000
+#define UCC_UART_UPSMR_UM_MASK 0x0c00
+#define UCC_UART_UPSMR_UM_NORMAL 0x0000
+#define UCC_UART_UPSMR_UM_MAN_MULTI 0x0400
+#define UCC_UART_UPSMR_UM_AUTO_MULTI 0x0c00
+#define UCC_UART_UPSMR_FRZ 0x0200
+#define UCC_UART_UPSMR_RZS 0x0100
+#define UCC_UART_UPSMR_SYN 0x0080
+#define UCC_UART_UPSMR_DRT 0x0040
+#define UCC_UART_UPSMR_PEN 0x0010
+#define UCC_UART_UPSMR_RPM_MASK 0x000c
+#define UCC_UART_UPSMR_RPM_ODD 0x0000
+#define UCC_UART_UPSMR_RPM_LOW 0x0004
+#define UCC_UART_UPSMR_RPM_EVEN 0x0008
+#define UCC_UART_UPSMR_RPM_HIGH 0x000C
+#define UCC_UART_UPSMR_TPM_MASK 0x0003
+#define UCC_UART_UPSMR_TPM_ODD 0x0000
+#define UCC_UART_UPSMR_TPM_LOW 0x0001
+#define UCC_UART_UPSMR_TPM_EVEN 0x0002
+#define UCC_UART_UPSMR_TPM_HIGH 0x0003
+
+/* UCC Protocol Specific Mode Register (UPSMR), when used for Ethernet */
+#define UCC_GETH_UPSMR_FTFE 0x80000000
+#define UCC_GETH_UPSMR_PTPE 0x40000000
+#define UCC_GETH_UPSMR_ECM 0x04000000
+#define UCC_GETH_UPSMR_HSE 0x02000000
+#define UCC_GETH_UPSMR_PRO 0x00400000
+#define UCC_GETH_UPSMR_CAP 0x00200000
+#define UCC_GETH_UPSMR_RSH 0x00100000
+#define UCC_GETH_UPSMR_RPM 0x00080000
+#define UCC_GETH_UPSMR_R10M 0x00040000
+#define UCC_GETH_UPSMR_RLPB 0x00020000
+#define UCC_GETH_UPSMR_TBIM 0x00010000
+#define UCC_GETH_UPSMR_RES1 0x00002000
+#define UCC_GETH_UPSMR_RMM 0x00001000
+#define UCC_GETH_UPSMR_CAM 0x00000400
+#define UCC_GETH_UPSMR_BRO 0x00000200
+#define UCC_GETH_UPSMR_SMM 0x00000080
+#define UCC_GETH_UPSMR_SGMM 0x00000020
+
+/* UCC Transmit On Demand Register (UTODR) */
+#define UCC_SLOW_TOD 0x8000
+#define UCC_FAST_TOD 0x8000
+
+/* UCC Bus Mode Register masks */
+/* Not to be confused with the Bundle Mode Register */
+#define UCC_BMR_GBL 0x20
+#define UCC_BMR_BO_BE 0x10
+#define UCC_BMR_CETM 0x04
+#define UCC_BMR_DTB 0x02
+#define UCC_BMR_BDB 0x01
+
+/* Function code masks */
+#define FC_GBL 0x20
+#define FC_DTB_LCL 0x02
+#define UCC_FAST_FUNCTION_CODE_GBL 0x20
+#define UCC_FAST_FUNCTION_CODE_DTB_LCL 0x02
+#define UCC_FAST_FUNCTION_CODE_BDB_LCL 0x01
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_QE_H */
diff --git a/include/qe/qe_ic.h b/include/qe/qe_ic.h
new file mode 100644
index 0000000..25784cc
--- /dev/null
+++ b/include/qe/qe_ic.h
@@ -0,0 +1,144 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * QE IC external definitions and structure.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_QE_IC_H
+#define _ASM_POWERPC_QE_IC_H
+
+#include <linux/irq.h>
+
+struct device_node;
+struct qe_ic;
+
+#define NUM_OF_QE_IC_GROUPS 6
+
+/* Flags when we init the QE IC */
+#define QE_IC_SPREADMODE_GRP_W 0x00000001
+#define QE_IC_SPREADMODE_GRP_X 0x00000002
+#define QE_IC_SPREADMODE_GRP_Y 0x00000004
+#define QE_IC_SPREADMODE_GRP_Z 0x00000008
+#define QE_IC_SPREADMODE_GRP_RISCA 0x00000010
+#define QE_IC_SPREADMODE_GRP_RISCB 0x00000020
+
+#define QE_IC_LOW_SIGNAL 0x00000100
+#define QE_IC_HIGH_SIGNAL 0x00000200
+
+#define QE_IC_GRP_W_PRI0_DEST_SIGNAL_HIGH 0x00001000
+#define QE_IC_GRP_W_PRI1_DEST_SIGNAL_HIGH 0x00002000
+#define QE_IC_GRP_X_PRI0_DEST_SIGNAL_HIGH 0x00004000
+#define QE_IC_GRP_X_PRI1_DEST_SIGNAL_HIGH 0x00008000
+#define QE_IC_GRP_Y_PRI0_DEST_SIGNAL_HIGH 0x00010000
+#define QE_IC_GRP_Y_PRI1_DEST_SIGNAL_HIGH 0x00020000
+#define QE_IC_GRP_Z_PRI0_DEST_SIGNAL_HIGH 0x00040000
+#define QE_IC_GRP_Z_PRI1_DEST_SIGNAL_HIGH 0x00080000
+#define QE_IC_GRP_RISCA_PRI0_DEST_SIGNAL_HIGH 0x00100000
+#define QE_IC_GRP_RISCA_PRI1_DEST_SIGNAL_HIGH 0x00200000
+#define QE_IC_GRP_RISCB_PRI0_DEST_SIGNAL_HIGH 0x00400000
+#define QE_IC_GRP_RISCB_PRI1_DEST_SIGNAL_HIGH 0x00800000
+#define QE_IC_GRP_W_DEST_SIGNAL_SHIFT (12)
+
+/* QE interrupt sources groups */
+enum qe_ic_grp_id {
+ QE_IC_GRP_W = 0, /* QE interrupt controller group W */
+ QE_IC_GRP_X, /* QE interrupt controller group X */
+ QE_IC_GRP_Y, /* QE interrupt controller group Y */
+ QE_IC_GRP_Z, /* QE interrupt controller group Z */
+ QE_IC_GRP_RISCA, /* QE interrupt controller RISC group A */
+ QE_IC_GRP_RISCB /* QE interrupt controller RISC group B */
+};
+
+#ifdef CONFIG_QUICC_ENGINE
+void qe_ic_init(struct device_node *node, unsigned int flags,
+ void (*low_handler)(unsigned int irq, struct irq_desc *desc),
+ void (*high_handler)(unsigned int irq, struct irq_desc *desc));
+unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic);
+unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic);
+#else
+static inline void qe_ic_init(struct device_node *node, unsigned int flags,
+ void (*low_handler)(unsigned int irq, struct irq_desc *desc),
+ void (*high_handler)(unsigned int irq, struct irq_desc *desc))
+{}
+static inline unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic)
+{ return 0; }
+static inline unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic)
+{ return 0; }
+#endif /* CONFIG_QUICC_ENGINE */
+
+void qe_ic_set_highest_priority(unsigned int virq, int high);
+int qe_ic_set_priority(unsigned int virq, unsigned int priority);
+int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high);
+
+static inline void qe_ic_cascade_low_ipic(unsigned int irq,
+ struct irq_desc *desc)
+{
+ struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
+ unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
+
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq);
+}
+
+static inline void qe_ic_cascade_high_ipic(unsigned int irq,
+ struct irq_desc *desc)
+{
+ struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
+ unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
+
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq);
+}
+
+static inline void qe_ic_cascade_low_mpic(unsigned int irq,
+ struct irq_desc *desc)
+{
+ struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
+ unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq);
+
+ chip->irq_eoi(&desc->irq_data);
+}
+
+static inline void qe_ic_cascade_high_mpic(unsigned int irq,
+ struct irq_desc *desc)
+{
+ struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
+ unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq);
+
+ chip->irq_eoi(&desc->irq_data);
+}
+
+static inline void qe_ic_cascade_muxed_mpic(unsigned int irq,
+ struct irq_desc *desc)
+{
+ struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
+ unsigned int cascade_irq;
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+
+ cascade_irq = qe_ic_get_high_irq(qe_ic);
+ if (cascade_irq == NO_IRQ)
+ cascade_irq = qe_ic_get_low_irq(qe_ic);
+
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq);
+
+ chip->irq_eoi(&desc->irq_data);
+}
+
+#endif /* _ASM_POWERPC_QE_IC_H */
diff --git a/include/qe/ucc.h b/include/qe/ucc.h
new file mode 100644
index 0000000..58873cc
--- /dev/null
+++ b/include/qe/ucc.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * Internal header file for UCC unit routines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __UCC_H__
+#define __UCC_H__
+
+#include <qe/immap_qe.h>
+#include <qe/qe.h>
+
+#define STATISTICS
+
+#define UCC_MAX_NUM 8
+
+/* Slow or fast type for UCCs.
+*/
+enum ucc_speed_type {
+ UCC_SPEED_TYPE_FAST = UCC_GUEMR_MODE_FAST_RX | UCC_GUEMR_MODE_FAST_TX,
+ UCC_SPEED_TYPE_SLOW = UCC_GUEMR_MODE_SLOW_RX | UCC_GUEMR_MODE_SLOW_TX
+};
+
+/* ucc_set_type
+ * Sets UCC to slow or fast mode.
+ *
+ * ucc_num - (In) number of UCC (0-7).
+ * speed - (In) slow or fast mode for UCC.
+ */
+int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed);
+
+int ucc_set_qe_mux_mii_mng(unsigned int ucc_num);
+
+int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock,
+ enum comm_dir mode);
+
+int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask);
+
+/* QE MUX clock routing for UCC
+*/
+static inline int ucc_set_qe_mux_grant(unsigned int ucc_num, int set)
+{
+ return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_GRANT);
+}
+
+static inline int ucc_set_qe_mux_tsa(unsigned int ucc_num, int set)
+{
+ return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_TSA);
+}
+
+static inline int ucc_set_qe_mux_bkpt(unsigned int ucc_num, int set)
+{
+ return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_BKPT);
+}
+
+#endif /* __UCC_H__ */
diff --git a/include/qe/ucc_fast.h b/include/qe/ucc_fast.h
new file mode 100644
index 0000000..7c91ef5
--- /dev/null
+++ b/include/qe/ucc_fast.h
@@ -0,0 +1,244 @@
+/*
+ * Internal header file for UCC FAST unit routines.
+ *
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __UCC_FAST_H__
+#define __UCC_FAST_H__
+
+#include <linux/kernel.h>
+
+#include <qe/immap_qe.h>
+#include <qe/qe.h>
+
+#include <qe/ucc.h>
+
+/* Receive BD's status */
+#define R_E 0x80000000 /* buffer empty */
+#define R_W 0x20000000 /* wrap bit */
+#define R_I 0x10000000 /* interrupt on reception */
+#define R_L 0x08000000 /* last */
+#define R_F 0x04000000 /* first */
+
+/* transmit BD's status */
+#define T_R 0x80000000 /* ready bit */
+#define T_W 0x20000000 /* wrap bit */
+#define T_I 0x10000000 /* interrupt on completion */
+#define T_L 0x08000000 /* last */
+
+/* Rx Data buffer must be 4 bytes aligned in most cases */
+#define UCC_FAST_RX_ALIGN 4
+#define UCC_FAST_MRBLR_ALIGNMENT 4
+#define UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT 8
+
+/* Sizes */
+#define UCC_FAST_URFS_MIN_VAL 0x88
+#define UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR 8
+
+/* ucc_fast_channel_protocol_mode - UCC FAST mode */
+enum ucc_fast_channel_protocol_mode {
+ UCC_FAST_PROTOCOL_MODE_HDLC = 0x00000000,
+ UCC_FAST_PROTOCOL_MODE_RESERVED01 = 0x00000001,
+ UCC_FAST_PROTOCOL_MODE_RESERVED_QMC = 0x00000002,
+ UCC_FAST_PROTOCOL_MODE_RESERVED02 = 0x00000003,
+ UCC_FAST_PROTOCOL_MODE_RESERVED_UART = 0x00000004,
+ UCC_FAST_PROTOCOL_MODE_RESERVED03 = 0x00000005,
+ UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_1 = 0x00000006,
+ UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_2 = 0x00000007,
+ UCC_FAST_PROTOCOL_MODE_RESERVED_BISYNC = 0x00000008,
+ UCC_FAST_PROTOCOL_MODE_RESERVED04 = 0x00000009,
+ UCC_FAST_PROTOCOL_MODE_ATM = 0x0000000A,
+ UCC_FAST_PROTOCOL_MODE_RESERVED05 = 0x0000000B,
+ UCC_FAST_PROTOCOL_MODE_ETHERNET = 0x0000000C,
+ UCC_FAST_PROTOCOL_MODE_RESERVED06 = 0x0000000D,
+ UCC_FAST_PROTOCOL_MODE_POS = 0x0000000E,
+ UCC_FAST_PROTOCOL_MODE_RESERVED07 = 0x0000000F
+};
+
+/* ucc_fast_transparent_txrx - UCC Fast Transparent TX & RX */
+enum ucc_fast_transparent_txrx {
+ UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_NORMAL = 0x00000000,
+ UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_TRANSPARENT = 0x18000000
+};
+
+/* UCC fast diagnostic mode */
+enum ucc_fast_diag_mode {
+ UCC_FAST_DIAGNOSTIC_NORMAL = 0x0,
+ UCC_FAST_DIAGNOSTIC_LOCAL_LOOP_BACK = 0x40000000,
+ UCC_FAST_DIAGNOSTIC_AUTO_ECHO = 0x80000000,
+ UCC_FAST_DIAGNOSTIC_LOOP_BACK_AND_ECHO = 0xC0000000
+};
+
+/* UCC fast Sync length (transparent mode only) */
+enum ucc_fast_sync_len {
+ UCC_FAST_SYNC_LEN_NOT_USED = 0x0,
+ UCC_FAST_SYNC_LEN_AUTOMATIC = 0x00004000,
+ UCC_FAST_SYNC_LEN_8_BIT = 0x00008000,
+ UCC_FAST_SYNC_LEN_16_BIT = 0x0000C000
+};
+
+/* UCC fast RTS mode */
+enum ucc_fast_ready_to_send {
+ UCC_FAST_SEND_IDLES_BETWEEN_FRAMES = 0x00000000,
+ UCC_FAST_SEND_FLAGS_BETWEEN_FRAMES = 0x00002000
+};
+
+/* UCC fast receiver decoding mode */
+enum ucc_fast_rx_decoding_method {
+ UCC_FAST_RX_ENCODING_NRZ = 0x00000000,
+ UCC_FAST_RX_ENCODING_NRZI = 0x00000800,
+ UCC_FAST_RX_ENCODING_RESERVED0 = 0x00001000,
+ UCC_FAST_RX_ENCODING_RESERVED1 = 0x00001800
+};
+
+/* UCC fast transmitter encoding mode */
+enum ucc_fast_tx_encoding_method {
+ UCC_FAST_TX_ENCODING_NRZ = 0x00000000,
+ UCC_FAST_TX_ENCODING_NRZI = 0x00000100,
+ UCC_FAST_TX_ENCODING_RESERVED0 = 0x00000200,
+ UCC_FAST_TX_ENCODING_RESERVED1 = 0x00000300
+};
+
+/* UCC fast CRC length */
+enum ucc_fast_transparent_tcrc {
+ UCC_FAST_16_BIT_CRC = 0x00000000,
+ UCC_FAST_CRC_RESERVED0 = 0x00000040,
+ UCC_FAST_32_BIT_CRC = 0x00000080,
+ UCC_FAST_CRC_RESERVED1 = 0x000000C0
+};
+
+/* Fast UCC initialization structure */
+struct ucc_fast_info {
+ int ucc_num;
+ enum qe_clock rx_clock;
+ enum qe_clock tx_clock;
+ u32 regs;
+ int irq;
+ u32 uccm_mask;
+ int bd_mem_part;
+ int brkpt_support;
+ int grant_support;
+ int tsa;
+ int cdp;
+ int cds;
+ int ctsp;
+ int ctss;
+ int tci;
+ int txsy;
+ int rtsm;
+ int revd;
+ int rsyn;
+ u16 max_rx_buf_length;
+ u16 urfs;
+ u16 urfet;
+ u16 urfset;
+ u16 utfs;
+ u16 utfet;
+ u16 utftt;
+ u16 ufpt;
+ enum ucc_fast_channel_protocol_mode mode;
+ enum ucc_fast_transparent_txrx ttx_trx;
+ enum ucc_fast_tx_encoding_method tenc;
+ enum ucc_fast_rx_decoding_method renc;
+ enum ucc_fast_transparent_tcrc tcrc;
+ enum ucc_fast_sync_len synl;
+};
+
+struct ucc_fast_private {
+ struct ucc_fast_info *uf_info;
+ struct ucc_fast __iomem *uf_regs; /* a pointer to the UCC regs. */
+ u32 __iomem *p_ucce; /* a pointer to the event register in memory. */
+ u32 __iomem *p_uccm; /* a pointer to the mask register in memory. */
+#ifdef CONFIG_UGETH_TX_ON_DEMAND
+ u16 __iomem *p_utodr; /* pointer to the transmit on demand register */
+#endif
+ int enabled_tx; /* Whether channel is enabled for Tx (ENT) */
+ int enabled_rx; /* Whether channel is enabled for Rx (ENR) */
+ int stopped_tx; /* Whether channel has been stopped for Tx
+ (STOP_TX, etc.) */
+ int stopped_rx; /* Whether channel has been stopped for Rx */
+ u32 ucc_fast_tx_virtual_fifo_base_offset;/* pointer to base of Tx
+ virtual fifo */
+ u32 ucc_fast_rx_virtual_fifo_base_offset;/* pointer to base of Rx
+ virtual fifo */
+#ifdef STATISTICS
+ u32 tx_frames; /* Transmitted frames counter. */
+ u32 rx_frames; /* Received frames counter (only frames
+ passed to application). */
+ u32 tx_discarded; /* Discarded tx frames counter (frames that
+ were discarded by the driver due to errors).
+ */
+ u32 rx_discarded; /* Discarded rx frames counter (frames that
+ were discarded by the driver due to errors).
+ */
+#endif /* STATISTICS */
+ u16 mrblr; /* maximum receive buffer length */
+};
+
+/* ucc_fast_init
+ * Initializes Fast UCC according to user provided parameters.
+ *
+ * uf_info - (In) pointer to the fast UCC info structure.
+ * uccf_ret - (Out) pointer to the fast UCC structure.
+ */
+int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret);
+
+/* ucc_fast_free
+ * Frees all resources for fast UCC.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ */
+void ucc_fast_free(struct ucc_fast_private * uccf);
+
+/* ucc_fast_enable
+ * Enables a fast UCC port.
+ * This routine enables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode);
+
+/* ucc_fast_disable
+ * Disables a fast UCC port.
+ * This routine disables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode);
+
+/* ucc_fast_irq
+ * Handles interrupts on fast UCC.
+ * Called from the general interrupt routine to handle interrupts on fast UCC.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ */
+void ucc_fast_irq(struct ucc_fast_private * uccf);
+
+/* ucc_fast_transmit_on_demand
+ * Immediately forces a poll of the transmitter for data to be sent.
+ * Typically, the hardware performs a periodic poll for data that the
+ * transmit routine has set up to be transmitted. In cases where
+ * this polling cycle is not soon enough, this optional routine can
+ * be invoked to force a poll right away, instead. Proper use for
+ * each transmission for which this functionality is desired is to
+ * call the transmit routine and then this routine right after.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ */
+void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf);
+
+u32 ucc_fast_get_qe_cr_subblock(int uccf_num);
+
+void ucc_fast_dump_regs(struct ucc_fast_private * uccf);
+
+#endif /* __UCC_FAST_H__ */
diff --git a/include/qe/ucc_slow.h b/include/qe/ucc_slow.h
new file mode 100644
index 0000000..7511990
--- /dev/null
+++ b/include/qe/ucc_slow.h
@@ -0,0 +1,290 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * Internal header file for UCC SLOW unit routines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __UCC_SLOW_H__
+#define __UCC_SLOW_H__
+
+#include <linux/kernel.h>
+
+#include <qe/immap_qe.h>
+#include <qe/qe.h>
+
+#include <qe/ucc.h>
+
+/* transmit BD's status */
+#define T_R 0x80000000 /* ready bit */
+#define T_PAD 0x40000000 /* add pads to short frames */
+#define T_W 0x20000000 /* wrap bit */
+#define T_I 0x10000000 /* interrupt on completion */
+#define T_L 0x08000000 /* last */
+
+#define T_A 0x04000000 /* Address - the data transmitted as address
+ chars */
+#define T_TC 0x04000000 /* transmit CRC */
+#define T_CM 0x02000000 /* continuous mode */
+#define T_DEF 0x02000000 /* collision on previous attempt to transmit */
+#define T_P 0x01000000 /* Preamble - send Preamble sequence before
+ data */
+#define T_HB 0x01000000 /* heartbeat */
+#define T_NS 0x00800000 /* No Stop */
+#define T_LC 0x00800000 /* late collision */
+#define T_RL 0x00400000 /* retransmission limit */
+#define T_UN 0x00020000 /* underrun */
+#define T_CT 0x00010000 /* CTS lost */
+#define T_CSL 0x00010000 /* carrier sense lost */
+#define T_RC 0x003c0000 /* retry count */
+
+/* Receive BD's status */
+#define R_E 0x80000000 /* buffer empty */
+#define R_W 0x20000000 /* wrap bit */
+#define R_I 0x10000000 /* interrupt on reception */
+#define R_L 0x08000000 /* last */
+#define R_C 0x08000000 /* the last byte in this buffer is a cntl
+ char */
+#define R_F 0x04000000 /* first */
+#define R_A 0x04000000 /* the first byte in this buffer is address
+ byte */
+#define R_CM 0x02000000 /* continuous mode */
+#define R_ID 0x01000000 /* buffer close on reception of idles */
+#define R_M 0x01000000 /* Frame received because of promiscuous
+ mode */
+#define R_AM 0x00800000 /* Address match */
+#define R_DE 0x00800000 /* Address match */
+#define R_LG 0x00200000 /* Break received */
+#define R_BR 0x00200000 /* Frame length violation */
+#define R_NO 0x00100000 /* Rx Non Octet Aligned Packet */
+#define R_FR 0x00100000 /* Framing Error (no stop bit) character
+ received */
+#define R_PR 0x00080000 /* Parity Error character received */
+#define R_AB 0x00080000 /* Frame Aborted */
+#define R_SH 0x00080000 /* frame is too short */
+#define R_CR 0x00040000 /* CRC Error */
+#define R_OV 0x00020000 /* Overrun */
+#define R_CD 0x00010000 /* CD lost */
+#define R_CL 0x00010000 /* this frame is closed because of a
+ collision */
+
+/* Rx Data buffer must be 4 bytes aligned in most cases.*/
+#define UCC_SLOW_RX_ALIGN 4
+#define UCC_SLOW_MRBLR_ALIGNMENT 4
+#define UCC_SLOW_PRAM_SIZE 0x100
+#define ALIGNMENT_OF_UCC_SLOW_PRAM 64
+
+/* UCC Slow Channel Protocol Mode */
+enum ucc_slow_channel_protocol_mode {
+ UCC_SLOW_CHANNEL_PROTOCOL_MODE_QMC = 0x00000002,
+ UCC_SLOW_CHANNEL_PROTOCOL_MODE_UART = 0x00000004,
+ UCC_SLOW_CHANNEL_PROTOCOL_MODE_BISYNC = 0x00000008,
+};
+
+/* UCC Slow Transparent Transmit CRC (TCRC) */
+enum ucc_slow_transparent_tcrc {
+ /* 16-bit CCITT CRC (HDLC). (X16 + X12 + X5 + 1) */
+ UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC16 = 0x00000000,
+ /* CRC16 (BISYNC). (X16 + X15 + X2 + 1) */
+ UCC_SLOW_TRANSPARENT_TCRC_CRC16 = 0x00004000,
+ /* 32-bit CCITT CRC (Ethernet and HDLC) */
+ UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC32 = 0x00008000,
+};
+
+/* UCC Slow oversampling rate for transmitter (TDCR) */
+enum ucc_slow_tx_oversampling_rate {
+ /* 1x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_1 = 0x00000000,
+ /* 8x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_8 = 0x00010000,
+ /* 16x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_16 = 0x00020000,
+ /* 32x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_32 = 0x00030000,
+};
+
+/* UCC Slow Oversampling rate for receiver (RDCR)
+*/
+enum ucc_slow_rx_oversampling_rate {
+ /* 1x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_1 = 0x00000000,
+ /* 8x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_8 = 0x00004000,
+ /* 16x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_16 = 0x00008000,
+ /* 32x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_32 = 0x0000c000,
+};
+
+/* UCC Slow Transmitter encoding method (TENC)
+*/
+enum ucc_slow_tx_encoding_method {
+ UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZ = 0x00000000,
+ UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZI = 0x00000100
+};
+
+/* UCC Slow Receiver decoding method (RENC)
+*/
+enum ucc_slow_rx_decoding_method {
+ UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZ = 0x00000000,
+ UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZI = 0x00000800
+};
+
+/* UCC Slow Diagnostic mode (DIAG)
+*/
+enum ucc_slow_diag_mode {
+ UCC_SLOW_DIAG_MODE_NORMAL = 0x00000000,
+ UCC_SLOW_DIAG_MODE_LOOPBACK = 0x00000040,
+ UCC_SLOW_DIAG_MODE_ECHO = 0x00000080,
+ UCC_SLOW_DIAG_MODE_LOOPBACK_ECHO = 0x000000c0
+};
+
+struct ucc_slow_info {
+ int ucc_num;
+ int protocol; /* QE_CR_PROTOCOL_xxx */
+ enum qe_clock rx_clock;
+ enum qe_clock tx_clock;
+ phys_addr_t regs;
+ int irq;
+ u16 uccm_mask;
+ int data_mem_part;
+ int init_tx;
+ int init_rx;
+ u32 tx_bd_ring_len;
+ u32 rx_bd_ring_len;
+ int rx_interrupts;
+ int brkpt_support;
+ int grant_support;
+ int tsa;
+ int cdp;
+ int cds;
+ int ctsp;
+ int ctss;
+ int rinv;
+ int tinv;
+ int rtsm;
+ int rfw;
+ int tci;
+ int tend;
+ int tfl;
+ int txsy;
+ u16 max_rx_buf_length;
+ enum ucc_slow_transparent_tcrc tcrc;
+ enum ucc_slow_channel_protocol_mode mode;
+ enum ucc_slow_diag_mode diag;
+ enum ucc_slow_tx_oversampling_rate tdcr;
+ enum ucc_slow_rx_oversampling_rate rdcr;
+ enum ucc_slow_tx_encoding_method tenc;
+ enum ucc_slow_rx_decoding_method renc;
+};
+
+struct ucc_slow_private {
+ struct ucc_slow_info *us_info;
+ struct ucc_slow __iomem *us_regs; /* Ptr to memory map of UCC regs */
+ struct ucc_slow_pram *us_pram; /* a pointer to the parameter RAM */
+ u32 us_pram_offset;
+ int enabled_tx; /* Whether channel is enabled for Tx (ENT) */
+ int enabled_rx; /* Whether channel is enabled for Rx (ENR) */
+ int stopped_tx; /* Whether channel has been stopped for Tx
+ (STOP_TX, etc.) */
+ int stopped_rx; /* Whether channel has been stopped for Rx */
+ struct list_head confQ; /* frames passed to chip waiting for tx */
+ u32 first_tx_bd_mask; /* mask is used in Tx routine to save status
+ and length for first BD in a frame */
+ u32 tx_base_offset; /* first BD in Tx BD table offset (In MURAM) */
+ u32 rx_base_offset; /* first BD in Rx BD table offset (In MURAM) */
+ struct qe_bd *confBd; /* next BD for confirm after Tx */
+ struct qe_bd *tx_bd; /* next BD for new Tx request */
+ struct qe_bd *rx_bd; /* next BD to collect after Rx */
+ void *p_rx_frame; /* accumulating receive frame */
+ u16 *p_ucce; /* a pointer to the event register in memory.
+ */
+ u16 *p_uccm; /* a pointer to the mask register in memory */
+ u16 saved_uccm; /* a saved mask for the RX Interrupt bits */
+#ifdef STATISTICS
+ u32 tx_frames; /* Transmitted frames counters */
+ u32 rx_frames; /* Received frames counters (only frames
+ passed to application) */
+ u32 rx_discarded; /* Discarded frames counters (frames that
+ were discarded by the driver due to
+ errors) */
+#endif /* STATISTICS */
+};
+
+/* ucc_slow_init
+ * Initializes Slow UCC according to provided parameters.
+ *
+ * us_info - (In) pointer to the slow UCC info structure.
+ * uccs_ret - (Out) pointer to the slow UCC structure.
+ */
+int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret);
+
+/* ucc_slow_free
+ * Frees all resources for slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_free(struct ucc_slow_private * uccs);
+
+/* ucc_slow_enable
+ * Enables a fast UCC port.
+ * This routine enables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode);
+
+/* ucc_slow_disable
+ * Disables a fast UCC port.
+ * This routine disables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode);
+
+/* ucc_slow_poll_transmitter_now
+ * Immediately forces a poll of the transmitter for data to be sent.
+ * Typically, the hardware performs a periodic poll for data that the
+ * transmit routine has set up to be transmitted. In cases where
+ * this polling cycle is not soon enough, this optional routine can
+ * be invoked to force a poll right away, instead. Proper use for
+ * each transmission for which this functionality is desired is to
+ * call the transmit routine and then this routine right after.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs);
+
+/* ucc_slow_graceful_stop_tx
+ * Smoothly stops transmission on a specified slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs);
+
+/* ucc_slow_stop_tx
+ * Stops transmission on a specified slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_stop_tx(struct ucc_slow_private * uccs);
+
+/* ucc_slow_restart_tx
+ * Restarts transmitting on a specified slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_restart_tx(struct ucc_slow_private *uccs);
+
+u32 ucc_slow_get_qe_cr_subblock(int uccs_num);
+
+#endif /* __UCC_SLOW_H__ */
--
1.8.0
^ permalink raw reply related
* RE: [PATCH 2/7] iommu: add api to get iommu_domain of a device
From: Sethi Varun-B16395 @ 2013-10-14 12:58 UTC (permalink / raw)
To: Alex Williamson
Cc: Wood Scott-B07421, linux-pci@vger.kernel.org,
linux-kernel@vger.kernel.org, agraf@suse.de,
iommu@lists.linux-foundation.org, Bhushan Bharat-R65777,
linuxppc-dev@lists.ozlabs.org
In-Reply-To: <1381437698.2796.53.camel@ul30vt.home>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^ permalink raw reply
* Re: [PATCH 2/7] iommu: add api to get iommu_domain of a device
From: Alex Williamson @ 2013-10-14 14:20 UTC (permalink / raw)
To: Sethi Varun-B16395
Cc: Wood Scott-B07421, linux-pci@vger.kernel.org,
linux-kernel@vger.kernel.org, agraf@suse.de,
iommu@lists.linux-foundation.org, Bhushan Bharat-R65777,
linuxppc-dev@lists.ozlabs.org
In-Reply-To: <C5ECD7A89D1DC44195F34B25E172658D0A535437@039-SN2MPN1-013.039d.mgd.msft.net>
On Mon, 2013-10-14 at 12:58 +0000, Sethi Varun-B16395 wrote:
>
> > -----Original Message-----
> > From: Alex Williamson [mailto:alex.williamson@redhat.com]
> > Sent: Friday, October 11, 2013 2:12 AM
> > To: Sethi Varun-B16395
> > Cc: Bhushan Bharat-R65777; agraf@suse.de; Wood Scott-B07421; linux-
> > pci@vger.kernel.org; galak@kernel.crashing.org; linux-
> > kernel@vger.kernel.org; iommu@lists.linux-foundation.org;
> > benh@kernel.crashing.org; linuxppc-dev@lists.ozlabs.org
> > Subject: Re: [PATCH 2/7] iommu: add api to get iommu_domain of a device
> >
> > On Thu, 2013-10-10 at 20:09 +0000, Sethi Varun-B16395 wrote:
> > >
> > > > -----Original Message-----
> > > > From: iommu-bounces@lists.linux-foundation.org [mailto:iommu-
> > > > bounces@lists.linux-foundation.org] On Behalf Of Alex Williamson
> > > > Sent: Tuesday, October 08, 2013 8:43 AM
> > > > To: Bhushan Bharat-R65777
> > > > Cc: agraf@suse.de; Wood Scott-B07421; linux-pci@vger.kernel.org;
> > > > galak@kernel.crashing.org; linux-kernel@vger.kernel.org;
> > > > iommu@lists.linux-foundation.org; benh@kernel.crashing.org;
> > > > linuxppc- dev@lists.ozlabs.org
> > > > Subject: Re: [PATCH 2/7] iommu: add api to get iommu_domain of a
> > > > device
> > > >
> > > > On Mon, 2013-10-07 at 05:46 +0000, Bhushan Bharat-R65777 wrote:
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: Alex Williamson [mailto:alex.williamson@redhat.com]
> > > > > > Sent: Friday, October 04, 2013 11:42 PM
> > > > > > To: Bhushan Bharat-R65777
> > > > > > Cc: joro@8bytes.org; benh@kernel.crashing.org;
> > > > > > galak@kernel.crashing.org; linux- kernel@vger.kernel.org;
> > > > > > linuxppc-dev@lists.ozlabs.org; linux- pci@vger.kernel.org;
> > > > > > agraf@suse.de; Wood Scott-B07421; iommu@lists.linux-
> > > > > > foundation.org
> > > > > > Subject: Re: [PATCH 2/7] iommu: add api to get iommu_domain of a
> > > > > > device
> > > > > >
> > > > > > On Fri, 2013-10-04 at 17:23 +0000, Bhushan Bharat-R65777 wrote:
> > > > > > >
> > > > > > > > -----Original Message-----
> > > > > > > > From: Alex Williamson [mailto:alex.williamson@redhat.com]
> > > > > > > > Sent: Friday, October 04, 2013 10:43 PM
> > > > > > > > To: Bhushan Bharat-R65777
> > > > > > > > Cc: joro@8bytes.org; benh@kernel.crashing.org;
> > > > > > > > galak@kernel.crashing.org; linux- kernel@vger.kernel.org;
> > > > > > > > linuxppc-dev@lists.ozlabs.org; linux- pci@vger.kernel.org;
> > > > > > > > agraf@suse.de; Wood Scott-B07421; iommu@lists.linux-
> > > > > > > > foundation.org
> > > > > > > > Subject: Re: [PATCH 2/7] iommu: add api to get iommu_domain
> > > > > > > > of a device
> > > > > > > >
> > > > > > > > On Fri, 2013-10-04 at 16:47 +0000, Bhushan Bharat-R65777
> > wrote:
> > > > > > > > >
> > > > > > > > > > -----Original Message-----
> > > > > > > > > > From: Alex Williamson
> > > > > > > > > > [mailto:alex.williamson@redhat.com]
> > > > > > > > > > Sent: Friday, October 04, 2013 9:15 PM
> > > > > > > > > > To: Bhushan Bharat-R65777
> > > > > > > > > > Cc: joro@8bytes.org; benh@kernel.crashing.org;
> > > > > > > > > > galak@kernel.crashing.org; linux-
> > > > > > > > > > kernel@vger.kernel.org; linuxppc-dev@lists.ozlabs.org;
> > > > > > > > > > linux- pci@vger.kernel.org; agraf@suse.de; Wood
> > > > > > > > > > Scott-B07421; iommu@lists.linux- foundation.org
> > > > > > > > > > Subject: Re: [PATCH 2/7] iommu: add api to get
> > > > > > > > > > iommu_domain of a device
> > > > > > > > > >
> > > > > > > > > > On Fri, 2013-10-04 at 09:54 +0000, Bhushan Bharat-R65777
> > > > wrote:
> > > > > > > > > > >
> > > > > > > > > > > > -----Original Message-----
> > > > > > > > > > > > From: linux-pci-owner@vger.kernel.org
> > > > > > > > > > > > [mailto:linux-pci-owner@vger.kernel.org]
> > > > > > > > > > > > On Behalf Of Alex Williamson
> > > > > > > > > > > > Sent: Wednesday, September 25, 2013 10:16 PM
> > > > > > > > > > > > To: Bhushan Bharat-R65777
> > > > > > > > > > > > Cc: joro@8bytes.org; benh@kernel.crashing.org;
> > > > > > > > > > > > galak@kernel.crashing.org; linux-
> > > > > > > > > > > > kernel@vger.kernel.org;
> > > > > > > > > > > > linuxppc-dev@lists.ozlabs.org;
> > > > > > > > > > > > linux- pci@vger.kernel.org; agraf@suse.de; Wood
> > > > > > > > > > > > Scott-B07421; iommu@lists.linux- foundation.org;
> > > > > > > > > > > > Bhushan
> > > > > > > > > > > > Bharat-R65777
> > > > > > > > > > > > Subject: Re: [PATCH 2/7] iommu: add api to get
> > > > > > > > > > > > iommu_domain of a device
> > > > > > > > > > > >
> > > > > > > > > > > > On Thu, 2013-09-19 at 12:59 +0530, Bharat Bhushan
> > wrote:
> > > > > > > > > > > > > This api return the iommu domain to which the
> > > > > > > > > > > > > device is
> > > > attached.
> > > > > > > > > > > > > The iommu_domain is required for making API calls
> > > > > > > > > > > > > related to
> > > > > > iommu.
> > > > > > > > > > > > > Follow up patches which use this API to know iommu
> > > > maping.
> > > > > > > > > > > > >
> > > > > > > > > > > > > Signed-off-by: Bharat Bhushan
> > > > > > > > > > > > > <bharat.bhushan@freescale.com>
> > > > > > > > > > > > > ---
> > > > > > > > > > > > > drivers/iommu/iommu.c | 10 ++++++++++
> > > > > > > > > > > > > include/linux/iommu.h | 7 +++++++
> > > > > > > > > > > > > 2 files changed, 17 insertions(+), 0 deletions(-)
> > > > > > > > > > > > >
> > > > > > > > > > > > > diff --git a/drivers/iommu/iommu.c
> > > > > > > > > > > > > b/drivers/iommu/iommu.c index
> > > > > > > > > > > > > fbe9ca7..6ac5f50 100644
> > > > > > > > > > > > > --- a/drivers/iommu/iommu.c
> > > > > > > > > > > > > +++ b/drivers/iommu/iommu.c
> > > > > > > > > > > > > @@ -696,6 +696,16 @@ void
> > > > > > > > > > > > > iommu_detach_device(struct iommu_domain *domain,
> > > > > > > > > > > > > struct device *dev) }
> > > > > > > > > > > > > EXPORT_SYMBOL_GPL(iommu_detach_device);
> > > > > > > > > > > > >
> > > > > > > > > > > > > +struct iommu_domain *iommu_get_dev_domain(struct
> > > > device *dev) {
> > > > > > > > > > > > > + struct iommu_ops *ops = dev->bus->iommu_ops;
> > > > > > > > > > > > > +
> > > > > > > > > > > > > + if (unlikely(ops == NULL ||
> > > > > > > > > > > > > +ops->get_dev_iommu_domain ==
> > > > > > NULL))
> > > > > > > > > > > > > + return NULL;
> > > > > > > > > > > > > +
> > > > > > > > > > > > > + return ops->get_dev_iommu_domain(dev); }
> > > > > > > > > > > > > +EXPORT_SYMBOL_GPL(iommu_get_dev_domain);
> > > > > > > > > > > >
> > > > > > > > > > > > What prevents this from racing iommu_domain_free()?
> > > > > > > > > > > > There's no references acquired, so there's no reason
> > > > > > > > > > > > for the caller to assume the
> > > > > > > > > > pointer is valid.
> > > > > > > > > > >
> > > > > > > > > > > Sorry for late query, somehow this email went into a
> > > > > > > > > > > folder and escaped;
> > > > > > > > > > >
> > > > > > > > > > > Just to be sure, there is not lock at generic "struct
> > > > > > > > > > > iommu_domain", but IP
> > > > > > > > > > specific structure (link FSL domain) linked in
> > > > > > > > > > iommu_domain->priv have a lock, so we need to ensure
> > > > > > > > > > this race in FSL iommu code (say
> > > > > > > > > > drivers/iommu/fsl_pamu_domain.c),
> > > > right?
> > > > > > > > > >
> > > > > > > > > > No, it's not sufficient to make sure that your use of
> > > > > > > > > > the interface is race free. The interface itself needs
> > > > > > > > > > to be designed so that it's difficult to use incorrectly.
> > > > > > > > >
> > > > > > > > > So we can define
> > > > > > > > > iommu_get_dev_domain()/iommu_put_dev_domain();
> > > > > > > > > iommu_get_dev_domain() will return domain with the lock
> > > > > > > > > held, and
> > > > > > > > > iommu_put_dev_domain() will release the lock? And
> > > > > > > > > iommu_get_dev_domain() must always be followed by
> > > > > > > > > iommu_get_dev_domain().
> > > > > > > >
> > > > > > > > What lock? get/put are generally used for reference
> > > > > > > > counting, not locking in the kernel.
> > > > > > > >
> > > > > > > > > > That's not the case here. This is a backdoor to get the
> > > > > > > > > > iommu domain from the iommu driver regardless of who is
> > > > > > > > > > using
> > > > it or how.
> > > > > > > > > > The iommu domain is created and managed by vfio, so
> > > > > > > > > > shouldn't we be looking at how to do this through vfio?
> > > > > > > > >
> > > > > > > > > Let me first describe what we are doing here:
> > > > > > > > > During initialization:-
> > > > > > > > > - vfio talks to MSI system to know the MSI-page and size
> > > > > > > > > - vfio then interacts with iommu to map the MSI-page in
> > > > > > > > > iommu (IOVA is decided by userspace and physical address
> > > > > > > > > is the
> > > > > > > > > MSI-page)
> > > > > > > > > - So the IOVA subwindow mapping is created in iommu and
> > > > > > > > > yes VFIO know about
> > > > > > > > this mapping.
> > > > > > > > >
> > > > > > > > > Now do SET_IRQ(MSI/MSIX) ioctl:
> > > > > > > > > - calls pci_enable_msix()/pci_enable_msi_block(): which
> > > > > > > > > is supposed to set
> > > > > > > > MSI address/data in device.
> > > > > > > > > - So in current implementation (this patchset)
> > > > > > > > > msi-subsystem gets the IOVA
> > > > > > > > from iommu via this defined interface.
> > > > > > > > > - Are you saying that rather than getting this from
> > > > > > > > > iommu, we should get this
> > > > > > > > from vfio? What difference does this make?
> > > > > > > >
> > > > > > > > Yes, you just said above that vfio knows the msi to iova
> > > > > > > > mapping, so why go outside of vfio to find it later? The
> > > > > > > > difference is one case you can have a proper reference to
> > > > > > > > data structures to make sure the pointer you get back
> > > > > > > > actually has meaning at the time you're using it vs the code
> > > > > > > > here where you're defining an API that returns a meaningless
> > > > > > > > value
> > > > > > >
> > > > > > > With FSL-PAMU we will always get consistant data from iommu or
> > > > > > > vfio-data
> > > > > > structure.
> > > > > >
> > > > > > Great, but you're trying to add a generic API to the IOMMU
> > > > > > subsystem that's difficult to use correctly. The fact that you
> > > > > > use it correctly does not justify the API.
> > > > > >
> > > > > > > > because you can't check or
> > > > > > > > enforce that an arbitrary caller is using it correctly.
> > > > > > >
> > > > > > > I am not sure what is arbitrary caller? pdev is known to vfio,
> > > > > > > so vfio will only make
> > > > > > > pci_enable_msix()/pci_enable_msi_block() for
> > > > this pdev.
> > > > > > > If anyother code makes then it is some other unexpectedly
> > > > > > > thing happening in system, no?
> > > > > >
> > > > > > What's proposed here is a generic IOMMU API. Anybody can call
> > this.
> > > > > > What if the host SCSI driver decides to go get the iommu domain
> > > > > > for it's device (or any other device)? Does that fit your usage
> > model?
> > > > > >
> > > > > > > > It's not maintainable.
> > > > > > > > Thanks,
> > > > > > >
> > > > > > > I do not have any issue with this as well, can you also
> > > > > > > describe the type of API you are envisioning; I can think of
> > > > > > > defining some function in vfio.c/vfio_iommu*.c, make them
> > > > > > > global and declare then in include/Linux/vfio.h And include
> > > > > > > <Linux/vfio.h> in caller file
> > > > > > > (arch/powerpc/kernel/msi.c)
> > > > > >
> > > > > > Do you really want module dependencies between vfio and your
> > > > > > core kernel MSI setup? Look at the vfio external user interface
> > > > > > that
> > > > we've already defined.
> > > > > > That allows other components of the kernel to get a proper
> > > > > > reference to a vfio group. From there you can work out how to
> > > > > > get what you want. Another alternative is that vfio could
> > > > > > register an MSI to IOVA mapping with architecture code when the
> > mapping is created.
> > > > > > The MSI setup path could then do a lookup in architecture code
> > > > > > for the mapping. You could even store the MSI to IOVA mapping
> > > > > > in VFIO and create an interface where SET_IRQ passes that
> > > > > > mapping into setup
> > > > code.
> > > [Sethi Varun-B16395] What you are suggesting is that the MSI setup
> > > path queries the vfio subsystem for the mapping, rather than directly
> > > querying the iommu subsystem. So, say if we add an interface for
> > > getting MSI to IOVA mapping in the msi setup path, wouldn't this again
> > > be specific to vfio? I reckon that this interface would again ppc
> > > machine specific interface.
> >
> > Sure, if this is a generic MSI setup path then clearly vfio should not be
> > involved. But by that same notion, if this is a generic MSI setup path,
> > how can the proposed solutions guarantee that the iommu_domain or iova
> > returned is still valid in all cases? It's racy. If the caller trying
> > to setup MSI has the information needed, why doesn't it pass it in as
> > part of the setup? Thanks,
> [Sethi Varun-B16395] Agreed, the proposed interface is not clean. But, we still need an interface through which MSI driver can call in to the vfio layer.
Or one that allows vfio to pass in the iova when the interrupt is being
setup. I'm afraid any kind of reverse interface where MSI calls back
into vfio is going to be racy. Thanks,
Alex
^ permalink raw reply
* How to setup linux to the vxworks system?
From: Alexey Karpov @ 2013-10-14 14:47 UTC (permalink / raw)
To: linuxppc-dev
Hello!
I have a xerox print controller (an "serial number HFT"), used in xerox
8825, 8830 and 510 wide format print systems, and wish to use it as a
little home server. It based on powerpc G4 (MPC7410) and equipped with 2
PCI slots, 2 DIMM slots, intel-based integrated network card and 2
firewire ports. There is no video adapter, communication is done via
RS-232 port.
The problem is installed OS - vxworks and vxworks bootloader. I try to
load linux kernel with this bootloader, but kernel crashed. Next i try
to load yaboot (i get it from debian), yaboot seems to be running, but
trying to write her output to nonexistent videocard. I was try to google
about how to compile yaboot with uart support, but can't find anything.
Can you help me with booting linux kernel with vxworks bootloader, or
reflashing this strange device to openfirmware, u-boot, or other
bootloader to boot linux.
^ permalink raw reply
* Re: [PATCH] powerpc/qe_lib: Share the qe_lib for the others architecture
From: Scott Wood @ 2013-10-14 17:11 UTC (permalink / raw)
To: Xie Xiaobo; +Cc: linuxppc-dev
In-Reply-To: <1381750622-1150-1-git-send-email-X.Xie@freescale.com>
On Mon, 2013-10-14 at 19:37 +0800, Xie Xiaobo wrote:
> The QUICC Engine (QE) is a communications coprocessors on Freescale
> embedded processors. The QE had been applied in PowerPC architecture
> previously, and it will be applied in ARM architecture too.
> So move the qe_lib from arch/powerpc to driver/ firstly.
>
> Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
> ---
> arch/powerpc/Kconfig | 2 -
> arch/powerpc/include/asm/immap_qe.h | 491 -----------------
> arch/powerpc/include/asm/qe.h | 740 -------------------------
> arch/powerpc/include/asm/qe_ic.h | 144 -----
> arch/powerpc/include/asm/ucc.h | 64 ---
> arch/powerpc/include/asm/ucc_fast.h | 244 --------
> arch/powerpc/include/asm/ucc_slow.h | 290 ----------
> arch/powerpc/platforms/85xx/mpc85xx_mds.c | 4 +-
> arch/powerpc/platforms/85xx/mpc85xx_rdb.c | 4 +-
> arch/powerpc/platforms/Kconfig | 19 -
> arch/powerpc/sysdev/Makefile | 1 -
> arch/powerpc/sysdev/qe_lib/Kconfig | 27 -
> arch/powerpc/sysdev/qe_lib/Makefile | 10 -
> arch/powerpc/sysdev/qe_lib/gpio.c | 317 -----------
> arch/powerpc/sysdev/qe_lib/qe.c | 708 ------------------------
> arch/powerpc/sysdev/qe_lib/qe_ic.c | 501 -----------------
> arch/powerpc/sysdev/qe_lib/qe_ic.h | 103 ----
> arch/powerpc/sysdev/qe_lib/qe_io.c | 218 --------
> arch/powerpc/sysdev/qe_lib/ucc.c | 213 -------
> arch/powerpc/sysdev/qe_lib/ucc_fast.c | 364 ------------
> arch/powerpc/sysdev/qe_lib/ucc_slow.c | 380 -------------
> arch/powerpc/sysdev/qe_lib/usb.c | 56 --
> drivers/Kconfig | 2 +
> drivers/Makefile | 3 +
> drivers/net/ethernet/freescale/fsl_pq_mdio.c | 2 +-
> drivers/net/ethernet/freescale/ucc_geth.c | 8 +-
> drivers/net/ethernet/freescale/ucc_geth.h | 8 +-
> drivers/qe/Kconfig | 51 ++
> drivers/qe/Makefile | 10 +
> drivers/qe/gpio.c | 317 +++++++++++
> drivers/qe/qe.c | 708 ++++++++++++++++++++++++
> drivers/qe/qe_common.c | 187 +++++++
> drivers/qe/qe_ic.c | 501 +++++++++++++++++
> drivers/qe/qe_ic.h | 103 ++++
> drivers/qe/qe_io.c | 218 ++++++++
> drivers/qe/ucc.c | 213 +++++++
> drivers/qe/ucc_fast.c | 364 ++++++++++++
> drivers/qe/ucc_slow.c | 380 +++++++++++++
> drivers/qe/usb.c | 56 ++
> drivers/spi/spi-fsl-cpm.c | 2 +-
> drivers/tty/serial/ucc_uart.c | 2 +-
> include/qe/immap_qe.h | 491 +++++++++++++++++
> include/qe/qe.h | 794 +++++++++++++++++++++++++++
> include/qe/qe_ic.h | 144 +++++
> include/qe/ucc.h | 64 +++
> include/qe/ucc_fast.h | 244 ++++++++
> include/qe/ucc_slow.h | 290 ++++++++++
Use -M -C with git format-patch.
-Scott
^ permalink raw reply
* Re: [PATCH] powerpc/qe_lib: Share the qe_lib for the others architecture
From: Kumar Gala @ 2013-10-14 19:26 UTC (permalink / raw)
To: Xie Xiaobo; +Cc: scottwood, linuxppc-dev
In-Reply-To: <1381750622-1150-1-git-send-email-X.Xie@freescale.com>
On Oct 14, 2013, at 6:37 AM, Xie Xiaobo wrote:
> The QUICC Engine (QE) is a communications coprocessors on Freescale
> embedded processors. The QE had been applied in PowerPC architecture
> previously, and it will be applied in ARM architecture too.
> So move the qe_lib from arch/powerpc to driver/ firstly.
>=20
> Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
> ---
> arch/powerpc/Kconfig | 2 -
> arch/powerpc/include/asm/immap_qe.h | 491 -----------------
> arch/powerpc/include/asm/qe.h | 740 =
-------------------------
> arch/powerpc/include/asm/qe_ic.h | 144 -----
> arch/powerpc/include/asm/ucc.h | 64 ---
> arch/powerpc/include/asm/ucc_fast.h | 244 --------
> arch/powerpc/include/asm/ucc_slow.h | 290 ----------
> arch/powerpc/platforms/85xx/mpc85xx_mds.c | 4 +-
> arch/powerpc/platforms/85xx/mpc85xx_rdb.c | 4 +-
> arch/powerpc/platforms/Kconfig | 19 -
> arch/powerpc/sysdev/Makefile | 1 -
> arch/powerpc/sysdev/qe_lib/Kconfig | 27 -
> arch/powerpc/sysdev/qe_lib/Makefile | 10 -
> arch/powerpc/sysdev/qe_lib/gpio.c | 317 -----------
> arch/powerpc/sysdev/qe_lib/qe.c | 708 =
------------------------
> arch/powerpc/sysdev/qe_lib/qe_ic.c | 501 -----------------
> arch/powerpc/sysdev/qe_lib/qe_ic.h | 103 ----
> arch/powerpc/sysdev/qe_lib/qe_io.c | 218 --------
> arch/powerpc/sysdev/qe_lib/ucc.c | 213 -------
> arch/powerpc/sysdev/qe_lib/ucc_fast.c | 364 ------------
> arch/powerpc/sysdev/qe_lib/ucc_slow.c | 380 -------------
> arch/powerpc/sysdev/qe_lib/usb.c | 56 --
> drivers/Kconfig | 2 +
> drivers/Makefile | 3 +
> drivers/net/ethernet/freescale/fsl_pq_mdio.c | 2 +-
> drivers/net/ethernet/freescale/ucc_geth.c | 8 +-
> drivers/net/ethernet/freescale/ucc_geth.h | 8 +-
> drivers/qe/Kconfig | 51 ++
> drivers/qe/Makefile | 10 +
> drivers/qe/gpio.c | 317 +++++++++++
> drivers/qe/qe.c | 708 =
++++++++++++++++++++++++
> drivers/qe/qe_common.c | 187 +++++++
> drivers/qe/qe_ic.c | 501 +++++++++++++++++
> drivers/qe/qe_ic.h | 103 ++++
> drivers/qe/qe_io.c | 218 ++++++++
> drivers/qe/ucc.c | 213 +++++++
> drivers/qe/ucc_fast.c | 364 ++++++++++++
> drivers/qe/ucc_slow.c | 380 +++++++++++++
> drivers/qe/usb.c | 56 ++
> drivers/spi/spi-fsl-cpm.c | 2 +-
> drivers/tty/serial/ucc_uart.c | 2 +-
> include/qe/immap_qe.h | 491 +++++++++++++++++
> include/qe/qe.h | 794 =
+++++++++++++++++++++++++++
> include/qe/qe_ic.h | 144 +++++
> include/qe/ucc.h | 64 +++
> include/qe/ucc_fast.h | 244 ++++++++
> include/qe/ucc_slow.h | 290 ++++++++++
> 47 files changed, 5155 insertions(+), 4907 deletions(-)
> delete mode 100644 arch/powerpc/include/asm/immap_qe.h
> delete mode 100644 arch/powerpc/include/asm/qe.h
> delete mode 100644 arch/powerpc/include/asm/qe_ic.h
> delete mode 100644 arch/powerpc/include/asm/ucc.h
> delete mode 100644 arch/powerpc/include/asm/ucc_fast.h
> delete mode 100644 arch/powerpc/include/asm/ucc_slow.h
> delete mode 100644 arch/powerpc/sysdev/qe_lib/Kconfig
> delete mode 100644 arch/powerpc/sysdev/qe_lib/Makefile
> delete mode 100644 arch/powerpc/sysdev/qe_lib/gpio.c
> delete mode 100644 arch/powerpc/sysdev/qe_lib/qe.c
> delete mode 100644 arch/powerpc/sysdev/qe_lib/qe_ic.c
> delete mode 100644 arch/powerpc/sysdev/qe_lib/qe_ic.h
> delete mode 100644 arch/powerpc/sysdev/qe_lib/qe_io.c
> delete mode 100644 arch/powerpc/sysdev/qe_lib/ucc.c
> delete mode 100644 arch/powerpc/sysdev/qe_lib/ucc_fast.c
> delete mode 100644 arch/powerpc/sysdev/qe_lib/ucc_slow.c
> delete mode 100644 arch/powerpc/sysdev/qe_lib/usb.c
> create mode 100644 drivers/qe/Kconfig
> create mode 100644 drivers/qe/Makefile
> create mode 100644 drivers/qe/gpio.c
> create mode 100644 drivers/qe/qe.c
> create mode 100644 drivers/qe/qe_common.c
> create mode 100644 drivers/qe/qe_ic.c
> create mode 100644 drivers/qe/qe_ic.h
> create mode 100644 drivers/qe/qe_io.c
> create mode 100644 drivers/qe/ucc.c
> create mode 100644 drivers/qe/ucc_fast.c
> create mode 100644 drivers/qe/ucc_slow.c
> create mode 100644 drivers/qe/usb.c
> create mode 100644 include/qe/immap_qe.h
> create mode 100644 include/qe/qe.h
> create mode 100644 include/qe/qe_ic.h
> create mode 100644 include/qe/ucc.h
> create mode 100644 include/qe/ucc_fast.h
> create mode 100644 include/qe/ucc_slow.h
Before this is moved you should address the PPC specific issues in the =
code. Use of PPC_LIB_RHEAP, the IO macros which are not cross platform, =
etc.
Also, copy linux-kernel list as I'm not sure drivers/qe would be the =
recommendation location for this to end up at.
- k=
^ permalink raw reply
* Re: [PATCH] powerpc/qe_lib: Share the qe_lib for the others architecture
From: Kumar Gala @ 2013-10-14 19:36 UTC (permalink / raw)
To: Xie Xiaobo; +Cc: Scott Wood, linuxppc-dev@lists.ozlabs.org list
In-Reply-To: <8559CF98-88E4-4271-A873-1409359EFE5C@kernel.crashing.org>
On Oct 14, 2013, at 2:26 PM, Kumar Gala wrote:
>=20
> On Oct 14, 2013, at 6:37 AM, Xie Xiaobo wrote:
>=20
>> The QUICC Engine (QE) is a communications coprocessors on Freescale
>> embedded processors. The QE had been applied in PowerPC architecture
>> previously, and it will be applied in ARM architecture too.
>> So move the qe_lib from arch/powerpc to driver/ firstly.
>>=20
>> Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
>> ---
>> arch/powerpc/Kconfig | 2 -
>> arch/powerpc/include/asm/immap_qe.h | 491 -----------------
>> arch/powerpc/include/asm/qe.h | 740 =
-------------------------
>> arch/powerpc/include/asm/qe_ic.h | 144 -----
>> arch/powerpc/include/asm/ucc.h | 64 ---
>> arch/powerpc/include/asm/ucc_fast.h | 244 --------
>> arch/powerpc/include/asm/ucc_slow.h | 290 ----------
>> arch/powerpc/platforms/85xx/mpc85xx_mds.c | 4 +-
>> arch/powerpc/platforms/85xx/mpc85xx_rdb.c | 4 +-
>> arch/powerpc/platforms/Kconfig | 19 -
>> arch/powerpc/sysdev/Makefile | 1 -
>> arch/powerpc/sysdev/qe_lib/Kconfig | 27 -
>> arch/powerpc/sysdev/qe_lib/Makefile | 10 -
>> arch/powerpc/sysdev/qe_lib/gpio.c | 317 -----------
>> arch/powerpc/sysdev/qe_lib/qe.c | 708 =
------------------------
>> arch/powerpc/sysdev/qe_lib/qe_ic.c | 501 -----------------
>> arch/powerpc/sysdev/qe_lib/qe_ic.h | 103 ----
>> arch/powerpc/sysdev/qe_lib/qe_io.c | 218 --------
>> arch/powerpc/sysdev/qe_lib/ucc.c | 213 -------
>> arch/powerpc/sysdev/qe_lib/ucc_fast.c | 364 ------------
>> arch/powerpc/sysdev/qe_lib/ucc_slow.c | 380 -------------
>> arch/powerpc/sysdev/qe_lib/usb.c | 56 --
> Before this is moved you should address the PPC specific issues in the =
code. Use of PPC_LIB_RHEAP, the IO macros which are not cross platform, =
etc.
>=20
> Also, copy linux-kernel list as I'm not sure drivers/qe would be the =
recommendation location for this to end up at.
Additionally, some of this should move to using standard driver models =
that now exist. For example qe_ic.{c,h} should possibly look at going =
into drivers/irqchip/. gpio.c should be looked to use gpiolib and move =
into drivers/gpio. Some of the pinmux that exists in qe.c and ucc.c =
should look at the drivers/pinctrl and there is some amount of clk =
config that I wonder if it could move the common clk API and =
drivers/clk.
There will still be some qe_lib specific code, but vastly reduced.
- k=20
^ permalink raw reply
* Re: [PATCH] powerpc/qe_lib: Share the qe_lib for the others architecture
From: Kumar Gala @ 2013-10-14 19:40 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Scott Wood, linuxppc-dev@lists.ozlabs.org list, Linux Kernel list,
Xie Xiaobo
In-Reply-To: <8559CF98-88E4-4271-A873-1409359EFE5C@kernel.crashing.org>
On Oct 14, 2013, at 2:26 PM, Kumar Gala wrote:
>=20
> On Oct 14, 2013, at 6:37 AM, Xie Xiaobo wrote:
>=20
>> The QUICC Engine (QE) is a communications coprocessors on Freescale
>> embedded processors. The QE had been applied in PowerPC architecture
>> previously, and it will be applied in ARM architecture too.
>> So move the qe_lib from arch/powerpc to driver/ firstly.
>>=20
>> Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
>> ---
>> arch/powerpc/Kconfig | 2 -
>> arch/powerpc/include/asm/immap_qe.h | 491 -----------------
>> arch/powerpc/include/asm/qe.h | 740 =
-------------------------
>> arch/powerpc/include/asm/qe_ic.h | 144 -----
>> arch/powerpc/include/asm/ucc.h | 64 ---
>> arch/powerpc/include/asm/ucc_fast.h | 244 --------
>> arch/powerpc/include/asm/ucc_slow.h | 290 ----------
>> arch/powerpc/platforms/85xx/mpc85xx_mds.c | 4 +-
>> arch/powerpc/platforms/85xx/mpc85xx_rdb.c | 4 +-
>> arch/powerpc/platforms/Kconfig | 19 -
>> arch/powerpc/sysdev/Makefile | 1 -
>> arch/powerpc/sysdev/qe_lib/Kconfig | 27 -
>> arch/powerpc/sysdev/qe_lib/Makefile | 10 -
>> arch/powerpc/sysdev/qe_lib/gpio.c | 317 -----------
>> arch/powerpc/sysdev/qe_lib/qe.c | 708 =
------------------------
>> arch/powerpc/sysdev/qe_lib/qe_ic.c | 501 -----------------
>> arch/powerpc/sysdev/qe_lib/qe_ic.h | 103 ----
>> arch/powerpc/sysdev/qe_lib/qe_io.c | 218 --------
>> arch/powerpc/sysdev/qe_lib/ucc.c | 213 -------
>> arch/powerpc/sysdev/qe_lib/ucc_fast.c | 364 ------------
>> arch/powerpc/sysdev/qe_lib/ucc_slow.c | 380 -------------
>> arch/powerpc/sysdev/qe_lib/usb.c | 56 --
>> drivers/Kconfig | 2 +
>> drivers/Makefile | 3 +
>> drivers/net/ethernet/freescale/fsl_pq_mdio.c | 2 +-
>> drivers/net/ethernet/freescale/ucc_geth.c | 8 +-
>> drivers/net/ethernet/freescale/ucc_geth.h | 8 +-
>> drivers/qe/Kconfig | 51 ++
>> drivers/qe/Makefile | 10 +
>> drivers/qe/gpio.c | 317 +++++++++++
>> drivers/qe/qe.c | 708 =
++++++++++++++++++++++++
>> drivers/qe/qe_common.c | 187 +++++++
>> drivers/qe/qe_ic.c | 501 +++++++++++++++++
>> drivers/qe/qe_ic.h | 103 ++++
>> drivers/qe/qe_io.c | 218 ++++++++
>> drivers/qe/ucc.c | 213 +++++++
>> drivers/qe/ucc_fast.c | 364 ++++++++++++
>> drivers/qe/ucc_slow.c | 380 +++++++++++++
>> drivers/qe/usb.c | 56 ++
>> drivers/spi/spi-fsl-cpm.c | 2 +-
>> drivers/tty/serial/ucc_uart.c | 2 +-
>> include/qe/immap_qe.h | 491 +++++++++++++++++
>> include/qe/qe.h | 794 =
+++++++++++++++++++++++++++
>> include/qe/qe_ic.h | 144 +++++
>> include/qe/ucc.h | 64 +++
>> include/qe/ucc_fast.h | 244 ++++++++
>> include/qe/ucc_slow.h | 290 ++++++++++
>> 47 files changed, 5155 insertions(+), 4907 deletions(-)
>> delete mode 100644 arch/powerpc/include/asm/immap_qe.h
>> delete mode 100644 arch/powerpc/include/asm/qe.h
>> delete mode 100644 arch/powerpc/include/asm/qe_ic.h
>> delete mode 100644 arch/powerpc/include/asm/ucc.h
>> delete mode 100644 arch/powerpc/include/asm/ucc_fast.h
>> delete mode 100644 arch/powerpc/include/asm/ucc_slow.h
>> delete mode 100644 arch/powerpc/sysdev/qe_lib/Kconfig
>> delete mode 100644 arch/powerpc/sysdev/qe_lib/Makefile
>> delete mode 100644 arch/powerpc/sysdev/qe_lib/gpio.c
>> delete mode 100644 arch/powerpc/sysdev/qe_lib/qe.c
>> delete mode 100644 arch/powerpc/sysdev/qe_lib/qe_ic.c
>> delete mode 100644 arch/powerpc/sysdev/qe_lib/qe_ic.h
>> delete mode 100644 arch/powerpc/sysdev/qe_lib/qe_io.c
>> delete mode 100644 arch/powerpc/sysdev/qe_lib/ucc.c
>> delete mode 100644 arch/powerpc/sysdev/qe_lib/ucc_fast.c
>> delete mode 100644 arch/powerpc/sysdev/qe_lib/ucc_slow.c
>> delete mode 100644 arch/powerpc/sysdev/qe_lib/usb.c
>> create mode 100644 drivers/qe/Kconfig
>> create mode 100644 drivers/qe/Makefile
>> create mode 100644 drivers/qe/gpio.c
>> create mode 100644 drivers/qe/qe.c
>> create mode 100644 drivers/qe/qe_common.c
>> create mode 100644 drivers/qe/qe_ic.c
>> create mode 100644 drivers/qe/qe_ic.h
>> create mode 100644 drivers/qe/qe_io.c
>> create mode 100644 drivers/qe/ucc.c
>> create mode 100644 drivers/qe/ucc_fast.c
>> create mode 100644 drivers/qe/ucc_slow.c
>> create mode 100644 drivers/qe/usb.c
>> create mode 100644 include/qe/immap_qe.h
>> create mode 100644 include/qe/qe.h
>> create mode 100644 include/qe/qe_ic.h
>> create mode 100644 include/qe/ucc.h
>> create mode 100644 include/qe/ucc_fast.h
>> create mode 100644 include/qe/ucc_slow.h
>=20
> Before this is moved you should address the PPC specific issues in the =
code. Use of PPC_LIB_RHEAP, the IO macros which are not cross platform, =
etc.
>=20
> Also, copy linux-kernel list as I'm not sure drivers/qe would be the =
recommendation location for this to end up at.
Greg,
Wondering your thoughts on drivers/qe vs something like =
drivers/soc/fsl/qe. The QuiccEngine (qe) is a communication core on =
some of the Freescale networking SoCs that provides the ability to do =
various networking/communication functionality. "Channels" on the QE =
can be used for various different things from ethernet, ATM, UART, or =
other functions.
I've already commented that some of what is in qe_lib today needs to =
move to things like drivers/irqchip, drivers/pinctrl, drivers/gpio, etc. =
However, there will still be some qe specific code that doesn't have a =
natural home in drivers/ today.
- k=
^ permalink raw reply
* Re: [PATCH] powerpc/qe_lib: Share the qe_lib for the others architecture
From: Greg Kroah-Hartman @ 2013-10-14 20:09 UTC (permalink / raw)
To: Kumar Gala
Cc: Scott Wood, linuxppc-dev@lists.ozlabs.org list, Linux Kernel list,
Xie Xiaobo
In-Reply-To: <3F4D4A39-3063-45F5-8B0E-3CD5F36B4035@kernel.crashing.org>
On Mon, Oct 14, 2013 at 02:40:44PM -0500, Kumar Gala wrote:
>
> On Oct 14, 2013, at 2:26 PM, Kumar Gala wrote:
>
> >
> > On Oct 14, 2013, at 6:37 AM, Xie Xiaobo wrote:
> >
> >> The QUICC Engine (QE) is a communications coprocessors on Freescale
> >> embedded processors. The QE had been applied in PowerPC architecture
> >> previously, and it will be applied in ARM architecture too.
> >> So move the qe_lib from arch/powerpc to driver/ firstly.
> >>
> >> Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
> >> ---
> >> arch/powerpc/Kconfig | 2 -
> >> arch/powerpc/include/asm/immap_qe.h | 491 -----------------
> >> arch/powerpc/include/asm/qe.h | 740 -------------------------
> >> arch/powerpc/include/asm/qe_ic.h | 144 -----
> >> arch/powerpc/include/asm/ucc.h | 64 ---
> >> arch/powerpc/include/asm/ucc_fast.h | 244 --------
> >> arch/powerpc/include/asm/ucc_slow.h | 290 ----------
> >> arch/powerpc/platforms/85xx/mpc85xx_mds.c | 4 +-
> >> arch/powerpc/platforms/85xx/mpc85xx_rdb.c | 4 +-
> >> arch/powerpc/platforms/Kconfig | 19 -
> >> arch/powerpc/sysdev/Makefile | 1 -
> >> arch/powerpc/sysdev/qe_lib/Kconfig | 27 -
> >> arch/powerpc/sysdev/qe_lib/Makefile | 10 -
> >> arch/powerpc/sysdev/qe_lib/gpio.c | 317 -----------
> >> arch/powerpc/sysdev/qe_lib/qe.c | 708 ------------------------
> >> arch/powerpc/sysdev/qe_lib/qe_ic.c | 501 -----------------
> >> arch/powerpc/sysdev/qe_lib/qe_ic.h | 103 ----
> >> arch/powerpc/sysdev/qe_lib/qe_io.c | 218 --------
> >> arch/powerpc/sysdev/qe_lib/ucc.c | 213 -------
> >> arch/powerpc/sysdev/qe_lib/ucc_fast.c | 364 ------------
> >> arch/powerpc/sysdev/qe_lib/ucc_slow.c | 380 -------------
> >> arch/powerpc/sysdev/qe_lib/usb.c | 56 --
> >> drivers/Kconfig | 2 +
> >> drivers/Makefile | 3 +
> >> drivers/net/ethernet/freescale/fsl_pq_mdio.c | 2 +-
> >> drivers/net/ethernet/freescale/ucc_geth.c | 8 +-
> >> drivers/net/ethernet/freescale/ucc_geth.h | 8 +-
> >> drivers/qe/Kconfig | 51 ++
> >> drivers/qe/Makefile | 10 +
> >> drivers/qe/gpio.c | 317 +++++++++++
> >> drivers/qe/qe.c | 708 ++++++++++++++++++++++++
> >> drivers/qe/qe_common.c | 187 +++++++
> >> drivers/qe/qe_ic.c | 501 +++++++++++++++++
> >> drivers/qe/qe_ic.h | 103 ++++
> >> drivers/qe/qe_io.c | 218 ++++++++
> >> drivers/qe/ucc.c | 213 +++++++
> >> drivers/qe/ucc_fast.c | 364 ++++++++++++
> >> drivers/qe/ucc_slow.c | 380 +++++++++++++
> >> drivers/qe/usb.c | 56 ++
> >> drivers/spi/spi-fsl-cpm.c | 2 +-
> >> drivers/tty/serial/ucc_uart.c | 2 +-
> >> include/qe/immap_qe.h | 491 +++++++++++++++++
> >> include/qe/qe.h | 794 +++++++++++++++++++++++++++
> >> include/qe/qe_ic.h | 144 +++++
> >> include/qe/ucc.h | 64 +++
> >> include/qe/ucc_fast.h | 244 ++++++++
> >> include/qe/ucc_slow.h | 290 ++++++++++
> >> 47 files changed, 5155 insertions(+), 4907 deletions(-)
> >> delete mode 100644 arch/powerpc/include/asm/immap_qe.h
> >> delete mode 100644 arch/powerpc/include/asm/qe.h
> >> delete mode 100644 arch/powerpc/include/asm/qe_ic.h
> >> delete mode 100644 arch/powerpc/include/asm/ucc.h
> >> delete mode 100644 arch/powerpc/include/asm/ucc_fast.h
> >> delete mode 100644 arch/powerpc/include/asm/ucc_slow.h
> >> delete mode 100644 arch/powerpc/sysdev/qe_lib/Kconfig
> >> delete mode 100644 arch/powerpc/sysdev/qe_lib/Makefile
> >> delete mode 100644 arch/powerpc/sysdev/qe_lib/gpio.c
> >> delete mode 100644 arch/powerpc/sysdev/qe_lib/qe.c
> >> delete mode 100644 arch/powerpc/sysdev/qe_lib/qe_ic.c
> >> delete mode 100644 arch/powerpc/sysdev/qe_lib/qe_ic.h
> >> delete mode 100644 arch/powerpc/sysdev/qe_lib/qe_io.c
> >> delete mode 100644 arch/powerpc/sysdev/qe_lib/ucc.c
> >> delete mode 100644 arch/powerpc/sysdev/qe_lib/ucc_fast.c
> >> delete mode 100644 arch/powerpc/sysdev/qe_lib/ucc_slow.c
> >> delete mode 100644 arch/powerpc/sysdev/qe_lib/usb.c
> >> create mode 100644 drivers/qe/Kconfig
> >> create mode 100644 drivers/qe/Makefile
> >> create mode 100644 drivers/qe/gpio.c
> >> create mode 100644 drivers/qe/qe.c
> >> create mode 100644 drivers/qe/qe_common.c
> >> create mode 100644 drivers/qe/qe_ic.c
> >> create mode 100644 drivers/qe/qe_ic.h
> >> create mode 100644 drivers/qe/qe_io.c
> >> create mode 100644 drivers/qe/ucc.c
> >> create mode 100644 drivers/qe/ucc_fast.c
> >> create mode 100644 drivers/qe/ucc_slow.c
> >> create mode 100644 drivers/qe/usb.c
> >> create mode 100644 include/qe/immap_qe.h
> >> create mode 100644 include/qe/qe.h
> >> create mode 100644 include/qe/qe_ic.h
> >> create mode 100644 include/qe/ucc.h
> >> create mode 100644 include/qe/ucc_fast.h
> >> create mode 100644 include/qe/ucc_slow.h
> >
> > Before this is moved you should address the PPC specific issues in the code. Use of PPC_LIB_RHEAP, the IO macros which are not cross platform, etc.
> >
> > Also, copy linux-kernel list as I'm not sure drivers/qe would be the recommendation location for this to end up at.
>
> Greg,
>
> Wondering your thoughts on drivers/qe vs something like
> drivers/soc/fsl/qe. The QuiccEngine (qe) is a communication core on
> some of the Freescale networking SoCs that provides the ability to do
> various networking/communication functionality. "Channels" on the QE
> can be used for various different things from ethernet, ATM, UART, or
> other functions.
What makes the code "QE" specific? Are these devices that live on the
QE "bus", or are they controlling the QE controller?
It's hard to know what to do with code by just looking at a diffstat,
sorry.
> I've already commented that some of what is in qe_lib today needs to
> move to things like drivers/irqchip, drivers/pinctrl, drivers/gpio,
> etc. However, there will still be some qe specific code that doesn't
> have a natural home in drivers/ today.
Why not move it there now, instead of moving it twice? How will I know
the move will ever happen if we accept it this way "for now"?
greg k-h
^ permalink raw reply
* Re: [PATCH v5] powerpc/mpc85xx: Update the clock nodes in device tree
From: Scott Wood @ 2013-10-14 22:13 UTC (permalink / raw)
To: Tang Yuantian-B29983
Cc: Mark Rutland, Wood Scott-B07421, linuxppc-dev@lists.ozlabs.org,
Li Yang-Leo-R58472, devicetree@vger.kernel.org
In-Reply-To: <D07C73A334FF604B95B3CBD2A545D07B150C24BD@039-SN2MPN1-013.039d.mgd.msft.net>
On Fri, 2013-10-11 at 21:52 -0500, Tang Yuantian-B29983 wrote:
> Thanks for your review.
>=20
> > -----Original Message-----
> > From: Wood Scott-B07421
> > Sent: 2013=E5=B9=B410=E6=9C=8812=E6=97=A5 =E6=98=9F=E6=9C=9F=E5=85=AD=
3:07
> > To: Mark Rutland
> > Cc: Tang Yuantian-B29983; devicetree@vger.kernel.org; linuxppc-
> > dev@lists.ozlabs.org; Li Yang-Leo-R58472
> > Subject: Re: [PATCH v5] powerpc/mpc85xx: Update the clock nodes in de=
vice
> > tree
> >=20
> > I'm not sure I understand the "_0"/"_1" part, though. Doesn't each P=
LL
> > just have one output, which the consumer may choose to divide by 2 (o=
r in
> > some cases 4)? Why does that division need to be exposed in the devi=
ce
> > tree as separate connections to the parent clock?
> >=20
> The device tree makes that quite clear.=20
You chose to model it that way in the device tree; that doesn't make it
clear that the hardware works that way or that it's a good way to model
it.
> Each PLL has several output which MUX node can take from.
Point out where in the hardware documentation it says this. What I see
is a PLL that has one output, and a MUX register that can choose from
multiple PLL and divider options.
> It is not a runtime decision.
Hmm? It's a register you write to.
-Scott
^ permalink raw reply
* Re: [PATCH 1/3] iommu/fsl: Factor out PCI specific code.
From: Bjorn Helgaas @ 2013-10-15 0:16 UTC (permalink / raw)
To: Varun Sethi
Cc: alex.williamson, joro, stuart.yoder, linux-kernel, iommu, r65777,
scottwood, linuxppc-dev
In-Reply-To: <1381609954-15283-2-git-send-email-Varun.Sethi@freescale.com>
On Sun, Oct 13, 2013 at 02:02:32AM +0530, Varun Sethi wrote:
> Factor out PCI specific code in the PAMU driver.
>
> Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com>
> ---
> drivers/iommu/fsl_pamu_domain.c | 81 +++++++++++++++++++--------------------
> 1 file changed, 40 insertions(+), 41 deletions(-)
>
> diff --git a/drivers/iommu/fsl_pamu_domain.c b/drivers/iommu/fsl_pamu_domain.c
> index c857c30..e02e1de 100644
> --- a/drivers/iommu/fsl_pamu_domain.c
> +++ b/drivers/iommu/fsl_pamu_domain.c
> @@ -677,13 +677,9 @@ static int handle_attach_device(struct fsl_dma_domain *dma_domain,
> return ret;
> }
>
> -static int fsl_pamu_attach_device(struct iommu_domain *domain,
> - struct device *dev)
> +static void check_for_pci_dma_device(struct device **dev)
"check_for_pci_dma_device()" doesn't give a good clue about what the
function returns. And why return something via a reference parameter
when you could return it directly?
> {
> - struct fsl_dma_domain *dma_domain = domain->priv;
> - const u32 *liodn;
> - u32 liodn_cnt;
> - int len, ret = 0;
> +#ifdef CONFIG_PCI
> struct pci_dev *pdev = NULL;
> struct pci_controller *pci_ctl;
This is sort of a goofy looking function. It would read much better as
something like this:
struct device *dma_dev = dev;
#ifdef CONFIG_PCI
if (...) {
dma_dev = ...;
}
#endif
return dma_dev;
Does this need to care about reference counting when you return a pointer
to a different device?
Bjorn
>
> @@ -691,25 +687,38 @@ static int fsl_pamu_attach_device(struct iommu_domain *domain,
> * Use LIODN of the PCI controller while attaching a
> * PCI device.
> */
> - if (dev->bus == &pci_bus_type) {
> - pdev = to_pci_dev(dev);
> + if ((*dev)->bus == &pci_bus_type) {
> + pdev = to_pci_dev(*dev);
> pci_ctl = pci_bus_to_host(pdev->bus);
> /*
> * make dev point to pci controller device
> * so we can get the LIODN programmed by
> * u-boot.
> */
> - dev = pci_ctl->parent;
> + *dev = pci_ctl->parent;
> }
> +#endif
> +}
>
> - liodn = of_get_property(dev->of_node, "fsl,liodn", &len);
> +static int fsl_pamu_attach_device(struct iommu_domain *domain,
> + struct device *dev)
> +{
> + struct fsl_dma_domain *dma_domain = domain->priv;
> + struct device *dma_dev = dev;
> + const u32 *liodn;
> + u32 liodn_cnt;
> + int len, ret = 0;
> +
> + check_for_pci_dma_device(&dma_dev);
> +
> + liodn = of_get_property(dma_dev->of_node, "fsl,liodn", &len);
> if (liodn) {
> liodn_cnt = len / sizeof(u32);
> ret = handle_attach_device(dma_domain, dev,
> liodn, liodn_cnt);
> } else {
> pr_debug("missing fsl,liodn property at %s\n",
> - dev->of_node->full_name);
> + dma_dev->of_node->full_name);
> ret = -EINVAL;
> }
>
> @@ -720,32 +729,18 @@ static void fsl_pamu_detach_device(struct iommu_domain *domain,
> struct device *dev)
> {
> struct fsl_dma_domain *dma_domain = domain->priv;
> + struct device *dma_dev = dev;
> const u32 *prop;
> int len;
> - struct pci_dev *pdev = NULL;
> - struct pci_controller *pci_ctl;
>
> - /*
> - * Use LIODN of the PCI controller while detaching a
> - * PCI device.
> - */
> - if (dev->bus == &pci_bus_type) {
> - pdev = to_pci_dev(dev);
> - pci_ctl = pci_bus_to_host(pdev->bus);
> - /*
> - * make dev point to pci controller device
> - * so we can get the LIODN programmed by
> - * u-boot.
> - */
> - dev = pci_ctl->parent;
> - }
> + check_for_pci_dma_device(&dma_dev);
>
> - prop = of_get_property(dev->of_node, "fsl,liodn", &len);
> + prop = of_get_property(dma_dev->of_node, "fsl,liodn", &len);
> if (prop)
> detach_device(dev, dma_domain);
> else
> pr_debug("missing fsl,liodn property at %s\n",
> - dev->of_node->full_name);
> + dma_dev->of_node->full_name);
> }
>
> static int configure_domain_geometry(struct iommu_domain *domain, void *data)
> @@ -905,6 +900,7 @@ static struct iommu_group *get_device_iommu_group(struct device *dev)
> return group;
> }
>
> +#ifdef CONFIG_PCI
> static bool check_pci_ctl_endpt_part(struct pci_controller *pci_ctl)
> {
> u32 version;
> @@ -945,13 +941,18 @@ static struct iommu_group *get_shared_pci_device_group(struct pci_dev *pdev)
> return NULL;
> }
>
> -static struct iommu_group *get_pci_device_group(struct pci_dev *pdev)
> +static struct iommu_group *get_pci_device_group(struct device *dev)
> {
> struct pci_controller *pci_ctl;
> bool pci_endpt_partioning;
> struct iommu_group *group = NULL;
> - struct pci_dev *bridge, *dma_pdev = NULL;
> + struct pci_dev *bridge, *pdev;
> + struct pci_dev *dma_pdev = NULL;
>
> + pdev = to_pci_dev(dev);
> + /* Don't create device groups for virtual PCI bridges */
> + if (pdev->subordinate)
> + return NULL;
> pci_ctl = pci_bus_to_host(pdev->bus);
> pci_endpt_partioning = check_pci_ctl_endpt_part(pci_ctl);
> /* We can partition PCIe devices so assign device group to the device */
> @@ -1044,11 +1045,11 @@ root_bus:
>
> return group;
> }
> +#endif
>
> static int fsl_pamu_add_device(struct device *dev)
> {
> struct iommu_group *group = NULL;
> - struct pci_dev *pdev;
> const u32 *prop;
> int ret, len;
>
> @@ -1056,19 +1057,15 @@ static int fsl_pamu_add_device(struct device *dev)
> * For platform devices we allocate a separate group for
> * each of the devices.
> */
> - if (dev->bus == &pci_bus_type) {
> - pdev = to_pci_dev(dev);
> - /* Don't create device groups for virtual PCI bridges */
> - if (pdev->subordinate)
> - return 0;
> -
> - group = get_pci_device_group(pdev);
> -
> - } else {
> + if (dev->bus == &platform_bus_type) {
> prop = of_get_property(dev->of_node, "fsl,liodn", &len);
> if (prop)
> group = get_device_iommu_group(dev);
> }
> +#ifdef CONFIG_PCI
> + else
> + group = get_pci_device_group(dev);
> +#endif
>
> if (!group || IS_ERR(group))
> return PTR_ERR(group);
> @@ -1166,7 +1163,9 @@ int pamu_domain_init()
> return ret;
>
> bus_set_iommu(&platform_bus_type, &fsl_pamu_ops);
> +#ifdef CONFIG_PCI
> bus_set_iommu(&pci_bus_type, &fsl_pamu_ops);
> +#endif
>
> return ret;
> }
> --
> 1.7.9.5
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply
* RE: [PATCH v5] powerpc/mpc85xx: Update the clock nodes in device tree
From: Tang Yuantian-B29983 @ 2013-10-15 1:59 UTC (permalink / raw)
To: Wood Scott-B07421
Cc: Mark Rutland, devicetree@vger.kernel.org,
linuxppc-dev@lists.ozlabs.org, Li Yang-Leo-R58472
In-Reply-To: <1381788786.7979.643.camel@snotra.buserror.net>
DQo+IC0tLS0tT3JpZ2luYWwgTWVzc2FnZS0tLS0tDQo+IEZyb206IFdvb2QgU2NvdHQtQjA3NDIx
DQo+IFNlbnQ6IDIwMTPlubQxMOaciDE15pelIOaYn+acn+S6jCA2OjEzDQo+IFRvOiBUYW5nIFl1
YW50aWFuLUIyOTk4Mw0KPiBDYzogV29vZCBTY290dC1CMDc0MjE7IE1hcmsgUnV0bGFuZDsgZGV2
aWNldHJlZUB2Z2VyLmtlcm5lbC5vcmc7DQo+IGxpbnV4cHBjLWRldkBsaXN0cy5vemxhYnMub3Jn
OyBMaSBZYW5nLUxlby1SNTg0NzINCj4gU3ViamVjdDogUmU6IFtQQVRDSCB2NV0gcG93ZXJwYy9t
cGM4NXh4OiBVcGRhdGUgdGhlIGNsb2NrIG5vZGVzIGluIGRldmljZQ0KPiB0cmVlDQo+IA0KPiBP
biBGcmksIDIwMTMtMTAtMTEgYXQgMjE6NTIgLTA1MDAsIFRhbmcgWXVhbnRpYW4tQjI5OTgzIHdy
b3RlOg0KPiA+IFRoYW5rcyBmb3IgeW91ciByZXZpZXcuDQo+ID4NCj4gPiA+IC0tLS0tT3JpZ2lu
YWwgTWVzc2FnZS0tLS0tDQo+ID4gPiBGcm9tOiBXb29kIFNjb3R0LUIwNzQyMQ0KPiA+ID4gU2Vu
dDogMjAxM+W5tDEw5pyIMTLml6Ug5pif5pyf5YWtIDM6MDcNCj4gPiA+IFRvOiBNYXJrIFJ1dGxh
bmQNCj4gPiA+IENjOiBUYW5nIFl1YW50aWFuLUIyOTk4MzsgZGV2aWNldHJlZUB2Z2VyLmtlcm5l
bC5vcmc7IGxpbnV4cHBjLQ0KPiA+ID4gZGV2QGxpc3RzLm96bGFicy5vcmc7IExpIFlhbmctTGVv
LVI1ODQ3Mg0KPiA+ID4gU3ViamVjdDogUmU6IFtQQVRDSCB2NV0gcG93ZXJwYy9tcGM4NXh4OiBV
cGRhdGUgdGhlIGNsb2NrIG5vZGVzIGluDQo+ID4gPiBkZXZpY2UgdHJlZQ0KPiA+ID4NCj4gPiA+
IEknbSBub3Qgc3VyZSBJIHVuZGVyc3RhbmQgdGhlICJfMCIvIl8xIiBwYXJ0LCB0aG91Z2guICBE
b2Vzbid0IGVhY2gNCj4gPiA+IFBMTCBqdXN0IGhhdmUgb25lIG91dHB1dCwgd2hpY2ggdGhlIGNv
bnN1bWVyIG1heSBjaG9vc2UgdG8gZGl2aWRlIGJ5DQo+ID4gPiAyIChvciBpbiBzb21lIGNhc2Vz
IDQpPyAgV2h5IGRvZXMgdGhhdCBkaXZpc2lvbiBuZWVkIHRvIGJlIGV4cG9zZWQNCj4gPiA+IGlu
IHRoZSBkZXZpY2UgdHJlZSBhcyBzZXBhcmF0ZSBjb25uZWN0aW9ucyB0byB0aGUgcGFyZW50IGNs
b2NrPw0KPiA+ID4NCj4gPiBUaGUgZGV2aWNlIHRyZWUgbWFrZXMgdGhhdCBxdWl0ZSBjbGVhci4N
Cj4gDQo+IFlvdSBjaG9zZSB0byBtb2RlbCBpdCB0aGF0IHdheSBpbiB0aGUgZGV2aWNlIHRyZWU7
IHRoYXQgZG9lc24ndCBtYWtlIGl0DQo+IGNsZWFyIHRoYXQgdGhlIGhhcmR3YXJlIHdvcmtzIHRo
YXQgd2F5IG9yIHRoYXQgaXQncyBhIGdvb2Qgd2F5IHRvIG1vZGVsDQo+IGl0Lg0KPiANCj4gPiBF
YWNoIFBMTCBoYXMgc2V2ZXJhbCBvdXRwdXQgd2hpY2ggTVVYIG5vZGUgY2FuIHRha2UgZnJvbS4N
Cj4gDQo+IFBvaW50IG91dCB3aGVyZSBpbiB0aGUgaGFyZHdhcmUgZG9jdW1lbnRhdGlvbiBpdCBz
YXlzIHRoaXMuICBXaGF0IEkgc2VlDQo+IGlzIGEgUExMIHRoYXQgaGFzIG9uZSBvdXRwdXQsIGFu
ZCBhIE1VWCByZWdpc3RlciB0aGF0IGNhbiBjaG9vc2UgZnJvbQ0KPiBtdWx0aXBsZSBQTEwgYW5k
IGRpdmlkZXIgb3B0aW9ucy4NCj4gDQpUYWtlIFQ0MjQwIGZvciBleGFtcGxlOiBzZWUgc2VjdGlv
biA0LjYuNS4xICwgKFBhZ2UgMTQxKSBpbiBUNDI0MFJNIFJldi4gRCwgMDkvMjAxMi4NCg0KPiA+
ICBJdCBpcyBub3QgYSBydW50aW1lIGRlY2lzaW9uLg0KPiANCj4gSG1tPyAgSXQncyBhIHJlZ2lz
dGVyIHlvdSB3cml0ZSB0by4NCj4gDQpJIG1lYW4gdGhlIG51bWJlciBvZiBQTEwgb3V0cHV0IG9y
IHRoZSBkaXZpc2lvbiBvZiBQTEwgaXMgbm90IGEgcnVudGltZSBkZWNpc2lvbi4NCldoaWNoIG91
dHB1dCBvZiBQTEwgdGhlIE1VWCBjYW4gdGFrZSBpcyBhIHJ1bnRpbWUgZGVjaXNpb24uDQoNClJl
Z2FyZHMsDQpZdWFudGlhbg0KDQo+IC1TY290dA0KPiANCg0K
^ permalink raw reply
* [PATCH] powerpc: Use 32 bit loads and stores when operating on condition register values
From: Anton Blanchard @ 2013-10-15 3:36 UTC (permalink / raw)
To: benh, paulus, mikey, amodra; +Cc: linuxppc-dev
The condition register (CR) is a 32 bit quantity so we should use
32 bit loads and stores.
Signed-off-by: Anton Blanchard <anton@samba.org>
---
diff --git a/arch/powerpc/kernel/tm.S b/arch/powerpc/kernel/tm.S
index cd809ea..432cf54 100644
--- a/arch/powerpc/kernel/tm.S
+++ b/arch/powerpc/kernel/tm.S
@@ -107,7 +107,7 @@ DSCR_DEFAULT:
_GLOBAL(tm_reclaim)
mfcr r6
mflr r0
- std r6, 8(r1)
+ stw r6, 8(r1)
std r0, 16(r1)
std r2, 40(r1)
stdu r1, -TM_FRAME_SIZE(r1)
@@ -284,7 +284,7 @@ dont_backup_fp:
REST_NVGPRS(r1)
addi r1, r1, TM_FRAME_SIZE
- ld r4, 8(r1)
+ lwz r4, 8(r1)
ld r0, 16(r1)
mtcr r4
mtlr r0
@@ -309,7 +309,7 @@ dont_backup_fp:
_GLOBAL(tm_recheckpoint)
mfcr r5
mflr r0
- std r5, 8(r1)
+ stw r5, 8(r1)
std r0, 16(r1)
std r2, 40(r1)
stdu r1, -TM_FRAME_SIZE(r1)
@@ -441,7 +441,7 @@ restore_gprs:
REST_NVGPRS(r1)
addi r1, r1, TM_FRAME_SIZE
- ld r4, 8(r1)
+ lwz r4, 8(r1)
ld r0, 16(r1)
mtcr r4
mtlr r0
diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index 8f38445..2acc226 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -24,7 +24,7 @@
mflr r0; \
mfcr r12; \
std r0,16(r1); \
- std r12,8(r1); \
+ stw r12,8(r1); \
std r1,PACAR1(r13); \
li r0,0; \
mfmsr r12; \
@@ -46,7 +46,7 @@
_STATIC(opal_return)
ld r2,PACATOC(r13);
- ld r4,8(r1);
+ lwz r4,8(r1);
ld r5,16(r1);
ld r6,PACASAVEDMSR(r13);
mtspr SPRN_SRR0,r5;
^ permalink raw reply related
* Re: [PATCH] powerpc: Use 32 bit loads and stores when operating on condition register values
From: Paul Mackerras @ 2013-10-15 3:42 UTC (permalink / raw)
To: Anton Blanchard; +Cc: mikey, linuxppc-dev, amodra
In-Reply-To: <20131015143631.1879607c@kryten>
On Tue, Oct 15, 2013 at 02:36:31PM +1100, Anton Blanchard wrote:
>
> The condition register (CR) is a 32 bit quantity so we should use
> 32 bit loads and stores.
Does this make any practical difference or fix any bugs, or is this
just for aesthetics?
Paul.
^ permalink raw reply
* Re: [PATCH] powerpc: Use 32 bit loads and stores when operating on condition register values
From: Anton Blanchard @ 2013-10-15 3:55 UTC (permalink / raw)
To: Paul Mackerras; +Cc: mikey, linuxppc-dev, amodra
In-Reply-To: <20131015034206.GB17233@drongo>
Hi Paul,
> Does this make any practical difference or fix any bugs, or is this
> just for aesthetics?
There is talk of the other 32 bits of that word being used for a
stack canary in a future ABI revision. So right now it is just
cosmetic, but it could be important in the future.
I guess it could be an issue for kgdb since the CR will be in
the wrong spot on BE.
Anton
^ permalink raw reply
* Re: Build regressions/improvements in v3.12-rc5
From: Geert Uytterhoeven @ 2013-10-15 6:37 UTC (permalink / raw)
To: linux-kernel@vger.kernel.org; +Cc: linuxppc-dev@lists.ozlabs.org, Linux-sh list
In-Reply-To: <1381818878-19469-1-git-send-email-geert@linux-m68k.org>
On Tue, Oct 15, 2013 at 8:34 AM, Geert Uytterhoeven
<geert@linux-m68k.org> wrote:
> JFYI, when comparing v3.12-rc5 to v3.12-rc4[3], the summaries are:
> - build errors: +13/-6
+ /scratch/kisskb/src/arch/powerpc/kernel/fadump.c: error:
'KEXEC_CORE_NOTE_NAME' undeclared (first use in this function): =>
521:36
+ /scratch/kisskb/src/arch/powerpc/kernel/fadump.c: error:
'crashing_cpu' undeclared (first use in this function): => 408:2
+ /scratch/kisskb/src/arch/powerpc/kernel/fadump.c: error:
'note_buf_t' undeclared (first use in this function): => 624:49
+ /scratch/kisskb/src/arch/powerpc/kernel/fadump.c: error:
'vmcoreinfo_max_size' undeclared (first use in this function): =>
874:18
+ /scratch/kisskb/src/arch/powerpc/kernel/fadump.c: error: implicit
declaration of function 'crash_save_vmcoreinfo'
[-Werror=implicit-function-declaration]: => 410:2
+ /scratch/kisskb/src/arch/powerpc/kernel/fadump.c: error: implicit
declaration of function 'elf_core_copy_kernel_regs'
[-Werror=implicit-function-declaration]: => 520:2
+ /scratch/kisskb/src/arch/powerpc/kernel/fadump.c: error: implicit
declaration of function 'paddr_vmcoreinfo_note'
[-Werror=implicit-function-declaration]: => 872:2
+ /scratch/kisskb/src/arch/powerpc/kernel/fadump.c: error: storage
size of 'prstatus' isn't known: => 513:22
powerpc-randconfig
+ /scratch/kisskb/src/arch/sh/drivers/dma/dma-sh.c: error:
'DMTE6_IRQ' undeclared (first use in this function): => 58:21
+ /scratch/kisskb/src/drivers/gpu/drm/drm_gem_cma_helper.c: error:
implicit declaration of function 'dma_alloc_writecombine'
[-Werror=implicit-function-declaration]: => 91:2
+ /scratch/kisskb/src/drivers/gpu/drm/drm_gem_cma_helper.c: error:
implicit declaration of function 'dma_free_writecombine'
[-Werror=implicit-function-declaration]: => 176:3
sh-randconfig
> [1] http://kisskb.ellerman.id.au/kisskb/head/6776/ (all 120 configs)
> [3] http://kisskb.ellerman.id.au/kisskb/head/6753/ (all 120 configs)
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply
* Re: [PATCH -V2 00/14] Allow PR and HV KVM to coexist in one kernel
From: Aneesh Kumar K.V @ 2013-10-15 9:00 UTC (permalink / raw)
To: agraf, benh, paulus; +Cc: linuxppc-dev, kvm-ppc, kvm
In-Reply-To: <1381164482-31001-1-git-send-email-aneesh.kumar@linux.vnet.ibm.com>
Hi Alex,
Any update on this ?
-aneesh
"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> writes:
> Hi All,
>
> This patch series support enabling HV and PR KVM together in the same kernel. We
> extend machine property with new property "kvm_type". A value of "HV" will force HV
> KVM and "PR" PR KVM. If we don't specify kvm_type we will select the fastest KVM mode.
> ie, HV if that is supported otherwise PR.
>
> With Qemu command line having
>
> -machine pseries,accel=kvm,kvm_type=HV
>
> [root@llmp24l02 qemu]# bash ../qemu
> failed to initialize KVM: Invalid argument
> [root@llmp24l02 qemu]# modprobe kvm-pr
> [root@llmp24l02 qemu]# bash ../qemu
> failed to initialize KVM: Invalid argument
> [root@llmp24l02 qemu]# modprobe kvm-hv
> [root@llmp24l02 qemu]# bash ../qemu
>
> now with
>
> -machine pseries,accel=kvm,kvm_type=PR
>
> [root@llmp24l02 qemu]# rmmod kvm-pr
> [root@llmp24l02 qemu]# bash ../qemu
> failed to initialize KVM: Invalid argument
> [root@llmp24l02 qemu]#
> [root@llmp24l02 qemu]# modprobe kvm-pr
> [root@llmp24l02 qemu]# bash ../qemu
>
> Changes from V1:
> * Build fixes for BOOKE (only compile tested)
> * Address review feedback
>
> -aneesh
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev
^ permalink raw reply
* [PATCH v5 1/4] powerpc/fsl: add E6500 PVR and SPRN_PWRMGTCR0 define
From: Dongsheng Wang @ 2013-10-15 9:21 UTC (permalink / raw)
To: scottwood; +Cc: bharat.bhushan, linuxppc-dev, Wang Dongsheng
From: Wang Dongsheng <dongsheng.wang@freescale.com>
E6500 PVR and SPRN_PWRMGTCR0 will be used in subsequent pw20/altivec
idle patches.
Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com>
---
*v3:
Add bit definitions for PWRMGTCR0.
arch/powerpc/include/asm/reg.h | 2 ++
arch/powerpc/include/asm/reg_booke.h | 9 +++++++++
2 files changed, 11 insertions(+)
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 64264bf..d4160ca 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -1053,6 +1053,8 @@
#define PVR_8560 0x80200000
#define PVR_VER_E500V1 0x8020
#define PVR_VER_E500V2 0x8021
+#define PVR_VER_E6500 0x8040
+
/*
* For the 8xx processors, all of them report the same PVR family for
* the PowerPC core. The various versions of these processors must be
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index ed8f836..4a6457e 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -170,6 +170,7 @@
#define SPRN_L2CSR1 0x3FA /* L2 Data Cache Control and Status Register 1 */
#define SPRN_DCCR 0x3FA /* Data Cache Cacheability Register */
#define SPRN_ICCR 0x3FB /* Instruction Cache Cacheability Register */
+#define SPRN_PWRMGTCR0 0x3FB /* Power management control register 0 */
#define SPRN_SVR 0x3FF /* System Version Register */
/*
@@ -216,6 +217,14 @@
#define CCR1_DPC 0x00000100 /* Disable L1 I-Cache/D-Cache parity checking */
#define CCR1_TCS 0x00000080 /* Timer Clock Select */
+/* Bit definitions for PWRMGTCR0. */
+#define PWRMGTCR0_PW20_WAIT (1 << 14) /* PW20 state enable bit */
+#define PWRMGTCR0_PW20_ENT_SHIFT 8
+#define PWRMGTCR0_PW20_ENT 0x3F00
+#define PWRMGTCR0_AV_IDLE_PD_EN (1 << 22) /* Altivec idle enable */
+#define PWRMGTCR0_AV_IDLE_CNT_SHIFT 16
+#define PWRMGTCR0_AV_IDLE_CNT 0x3F0000
+
/* Bit definitions for the MCSR. */
#define MCSR_MCS 0x80000000 /* Machine Check Summary */
#define MCSR_IB 0x40000000 /* Instruction PLB Error */
--
1.8.0
^ permalink raw reply related
* [PATCH v5 2/4] powerpc/85xx: add hardware automatically enter altivec idle state
From: Dongsheng Wang @ 2013-10-15 9:21 UTC (permalink / raw)
To: scottwood; +Cc: bharat.bhushan, linuxppc-dev, Wang Dongsheng
In-Reply-To: <1381828871-17110-1-git-send-email-dongsheng.wang@freescale.com>
From: Wang Dongsheng <dongsheng.wang@freescale.com>
Each core's AltiVec unit may be placed into a power savings mode
by turning off power to the unit. Core hardware will automatically
power down the AltiVec unit after no AltiVec instructions have
executed in N cycles. The AltiVec power-control is triggered by hardware.
Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com>
---
*v3:
Assembly code instead of C code.
*v2:
Remove:
delete setup_idle_hw_governor function.
delete "Fix erratum" for rev1.
Move:
move setup_* into __setup/restore_cpu_e6500.
arch/powerpc/kernel/cpu_setup_fsl_booke.S | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
index bfb18c7..4789056 100644
--- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S
+++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
@@ -53,11 +53,31 @@ _GLOBAL(__e500_dcache_setup)
isync
blr
+/*
+ * FIXME - we haven't yet done testing to determine a reasonable default
+ * value for AV_WAIT_IDLE_BIT.
+ */
+#define AV_WAIT_IDLE_BIT 50 /* 1ms, TB frequency is 41.66MHZ */
+_GLOBAL(setup_altivec_idle)
+ mfspr r3, SPRN_PWRMGTCR0
+
+ /* Enable Altivec Idle */
+ oris r3, r3, PWRMGTCR0_AV_IDLE_PD_EN@h
+ li r11, AV_WAIT_IDLE_BIT
+
+ /* Set Automatic AltiVec Idle Count */
+ rlwimi r3, r11, PWRMGTCR0_AV_IDLE_CNT_SHIFT, PWRMGTCR0_AV_IDLE_CNT
+
+ mtspr SPRN_PWRMGTCR0, r3
+
+ blr
+
_GLOBAL(__setup_cpu_e6500)
mflr r6
#ifdef CONFIG_PPC64
bl .setup_altivec_ivors
#endif
+ bl setup_altivec_idle
bl __setup_cpu_e5500
mtlr r6
blr
@@ -119,6 +139,7 @@ _GLOBAL(__setup_cpu_e5500)
_GLOBAL(__restore_cpu_e6500)
mflr r5
bl .setup_altivec_ivors
+ bl .setup_altivec_idle
bl __restore_cpu_e5500
mtlr r5
blr
--
1.8.0
^ permalink raw reply related
* [PATCH v5 3/4] powerpc/85xx: add hardware automatically enter pw20 state
From: Dongsheng Wang @ 2013-10-15 9:21 UTC (permalink / raw)
To: scottwood; +Cc: bharat.bhushan, linuxppc-dev, Wang Dongsheng
In-Reply-To: <1381828871-17110-1-git-send-email-dongsheng.wang@freescale.com>
From: Wang Dongsheng <dongsheng.wang@freescale.com>
Using hardware features make core automatically enter PW20 state.
Set a TB count to hardware, the effective count begins when PW10
is entered. When the effective period has expired, the core will
proceed from PW10 to PW20 if no exit conditions have occurred during
the period.
Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com>
---
*v3:
Assembly code instead of C code.
*v2:
Remove:
delete setup_idle_hw_governor function.
delete "Fix erratum" for rev1.
Move:
move setup_* into __setup/restore_cpu_e6500.
arch/powerpc/kernel/cpu_setup_fsl_booke.S | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
index 4789056..49e738e 100644
--- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S
+++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
@@ -55,6 +55,25 @@ _GLOBAL(__e500_dcache_setup)
/*
* FIXME - we haven't yet done testing to determine a reasonable default
+ * value for PW20_WAIT_IDLE_BIT.
+ */
+#define PW20_WAIT_IDLE_BIT 50 /* 1ms, TB frequency is 41.66MHZ */
+_GLOBAL(setup_pw20_idle)
+ mfspr r3, SPRN_PWRMGTCR0
+
+ /* Set PW20_WAIT bit, enable pw20 state*/
+ ori r3, r3, PWRMGTCR0_PW20_WAIT
+ li r11, PW20_WAIT_IDLE_BIT
+
+ /* Set Automatic PW20 Core Idle Count */
+ rlwimi r3, r11, PWRMGTCR0_PW20_ENT_SHIFT, PWRMGTCR0_PW20_ENT
+
+ mtspr SPRN_PWRMGTCR0, r3
+
+ blr
+
+/*
+ * FIXME - we haven't yet done testing to determine a reasonable default
* value for AV_WAIT_IDLE_BIT.
*/
#define AV_WAIT_IDLE_BIT 50 /* 1ms, TB frequency is 41.66MHZ */
@@ -77,6 +96,7 @@ _GLOBAL(__setup_cpu_e6500)
#ifdef CONFIG_PPC64
bl .setup_altivec_ivors
#endif
+ bl setup_pw20_idle
bl setup_altivec_idle
bl __setup_cpu_e5500
mtlr r6
@@ -139,6 +159,7 @@ _GLOBAL(__setup_cpu_e5500)
_GLOBAL(__restore_cpu_e6500)
mflr r5
bl .setup_altivec_ivors
+ bl .setup_pw20_idle
bl .setup_altivec_idle
bl __restore_cpu_e5500
mtlr r5
--
1.8.0
^ permalink raw reply related
* [PATCH v5 4/4] powerpc/85xx: add sysfs for pw20 state and altivec idle
From: Dongsheng Wang @ 2013-10-15 9:21 UTC (permalink / raw)
To: scottwood; +Cc: bharat.bhushan, linuxppc-dev, Wang Dongsheng
In-Reply-To: <1381828871-17110-1-git-send-email-dongsheng.wang@freescale.com>
From: Wang Dongsheng <dongsheng.wang@freescale.com>
Add a sys interface to enable/diable pw20 state or altivec idle, and
control the wait entry time.
Enable/Disable interface:
0, disable. 1, enable.
/sys/devices/system/cpu/cpuX/pw20_state
/sys/devices/system/cpu/cpuX/altivec_idle
Set wait time interface:(Nanosecond)
/sys/devices/system/cpu/cpuX/pw20_wait_time
/sys/devices/system/cpu/cpuX/altivec_idle_wait_time
Example: Base on TBfreq is 41MHZ.
1~48(ns): TB[63]
49~97(ns): TB[62]
98~195(ns): TB[61]
196~390(ns): TB[60]
391~780(ns): TB[59]
781~1560(ns): TB[58]
...
Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com>
---
*v5:
Change get_idle_ticks_bit function implementation.
*v4:
Move code from 85xx/common.c to kernel/sysfs.c.
Remove has_pw20_altivec_idle function.
Change wait "entry_bit" to wait time.
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index 27a90b9..10d1128 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -85,6 +85,284 @@ __setup("smt-snooze-delay=", setup_smt_snooze_delay);
#endif /* CONFIG_PPC64 */
+#ifdef CONFIG_FSL_SOC
+#define MAX_BIT 63
+
+static u64 pw20_wt;
+static u64 altivec_idle_wt;
+
+static unsigned int get_idle_ticks_bit(u64 ns)
+{
+ u64 cycle;
+
+ if (ns >= 10000)
+ cycle = div_u64(ns + 500, 1000) * tb_ticks_per_usec;
+ else
+ cycle = div_u64(ns * tb_ticks_per_usec, 1000);
+
+ if (!cycle)
+ return 0;
+
+ return ilog2(cycle);
+}
+
+static void do_show_pwrmgtcr0(void *val)
+{
+ u32 *value = val;
+
+ *value = mfspr(SPRN_PWRMGTCR0);
+}
+
+static ssize_t show_pw20_state(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ u32 value;
+ unsigned int cpu = dev->id;
+
+ smp_call_function_single(cpu, do_show_pwrmgtcr0, &value, 1);
+
+ value &= PWRMGTCR0_PW20_WAIT;
+
+ return sprintf(buf, "%u\n", value ? 1 : 0);
+}
+
+static void do_store_pw20_state(void *val)
+{
+ u32 *value = val;
+ u32 pw20_state;
+
+ pw20_state = mfspr(SPRN_PWRMGTCR0);
+
+ if (*value)
+ pw20_state |= PWRMGTCR0_PW20_WAIT;
+ else
+ pw20_state &= ~PWRMGTCR0_PW20_WAIT;
+
+ mtspr(SPRN_PWRMGTCR0, pw20_state);
+}
+
+static ssize_t store_pw20_state(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ u32 value;
+ unsigned int cpu = dev->id;
+
+ if (kstrtou32(buf, 0, &value))
+ return -EINVAL;
+
+ if (value > 1)
+ return -EINVAL;
+
+ smp_call_function_single(cpu, do_store_pw20_state, &value, 1);
+
+ return count;
+}
+
+static ssize_t show_pw20_wait_time(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ u32 value;
+ u64 tb_cycle;
+ s64 time;
+
+ unsigned int cpu = dev->id;
+
+ if (!pw20_wt) {
+ smp_call_function_single(cpu, do_show_pwrmgtcr0, &value, 1);
+ value = (value & PWRMGTCR0_PW20_ENT) >>
+ PWRMGTCR0_PW20_ENT_SHIFT;
+
+ tb_cycle = (1 << (MAX_BIT - value)) * 2;
+ time = div_u64(tb_cycle * 1000, tb_ticks_per_usec) - 1;
+ } else {
+ time = pw20_wt;
+ }
+
+ return sprintf(buf, "%llu\n", time > 0 ? time : 0);
+}
+
+static void set_pw20_wait_entry_bit(void *val)
+{
+ u32 *value = val;
+ u32 pw20_idle;
+
+ pw20_idle = mfspr(SPRN_PWRMGTCR0);
+
+ /* Set Automatic PW20 Core Idle Count */
+ /* clear count */
+ pw20_idle &= ~PWRMGTCR0_PW20_ENT;
+
+ /* set count */
+ pw20_idle |= ((MAX_BIT - *value) << PWRMGTCR0_PW20_ENT_SHIFT);
+
+ mtspr(SPRN_PWRMGTCR0, pw20_idle);
+}
+
+static ssize_t store_pw20_wait_time(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ u32 entry_bit;
+ u64 value;
+
+ unsigned int cpu = dev->id;
+
+ if (kstrtou64(buf, 0, &value))
+ return -EINVAL;
+
+ if (!value)
+ return -EINVAL;
+
+ entry_bit = get_idle_ticks_bit(value);
+ if (entry_bit > MAX_BIT)
+ return -EINVAL;
+
+ pw20_wt = value;
+ smp_call_function_single(cpu, set_pw20_wait_entry_bit,
+ &entry_bit, 1);
+
+ return count;
+}
+
+static ssize_t show_altivec_idle(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ u32 value;
+ unsigned int cpu = dev->id;
+
+ smp_call_function_single(cpu, do_show_pwrmgtcr0, &value, 1);
+
+ value &= PWRMGTCR0_AV_IDLE_PD_EN;
+
+ return sprintf(buf, "%u\n", value ? 1 : 0);
+}
+
+static void do_store_altivec_idle(void *val)
+{
+ u32 *value = val;
+ u32 altivec_idle;
+
+ altivec_idle = mfspr(SPRN_PWRMGTCR0);
+
+ if (*value)
+ altivec_idle |= PWRMGTCR0_AV_IDLE_PD_EN;
+ else
+ altivec_idle &= ~PWRMGTCR0_AV_IDLE_PD_EN;
+
+ mtspr(SPRN_PWRMGTCR0, altivec_idle);
+}
+
+static ssize_t store_altivec_idle(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ u32 value;
+ unsigned int cpu = dev->id;
+
+ if (kstrtou32(buf, 0, &value))
+ return -EINVAL;
+
+ if (value > 1)
+ return -EINVAL;
+
+ smp_call_function_single(cpu, do_store_altivec_idle, &value, 1);
+
+ return count;
+}
+
+static ssize_t show_altivec_idle_wait_time(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ u32 value;
+ u64 tb_cycle;
+ s64 time;
+
+ unsigned int cpu = dev->id;
+
+ if (!altivec_idle_wt) {
+ smp_call_function_single(cpu, do_show_pwrmgtcr0, &value, 1);
+ value = (value & PWRMGTCR0_AV_IDLE_CNT) >>
+ PWRMGTCR0_AV_IDLE_CNT_SHIFT;
+
+ tb_cycle = (1 << (MAX_BIT - value)) * 2;
+ time = div_u64(tb_cycle * 1000, tb_ticks_per_usec) - 1;
+ } else {
+ time = altivec_idle_wt;
+ }
+
+ return sprintf(buf, "%llu\n", time > 0 ? time : 0);
+}
+
+static void set_altivec_idle_wait_entry_bit(void *val)
+{
+ u32 *value = val;
+ u32 altivec_idle;
+
+ altivec_idle = mfspr(SPRN_PWRMGTCR0);
+
+ /* Set Automatic AltiVec Idle Count */
+ /* clear count */
+ altivec_idle &= ~PWRMGTCR0_AV_IDLE_CNT;
+
+ /* set count */
+ altivec_idle |= ((MAX_BIT - *value) << PWRMGTCR0_AV_IDLE_CNT_SHIFT);
+
+ mtspr(SPRN_PWRMGTCR0, altivec_idle);
+}
+
+static ssize_t store_altivec_idle_wait_time(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ u32 entry_bit;
+ u64 value;
+
+ unsigned int cpu = dev->id;
+
+ if (kstrtou64(buf, 0, &value))
+ return -EINVAL;
+
+ if (!value)
+ return -EINVAL;
+
+ entry_bit = get_idle_ticks_bit(value);
+ if (entry_bit > MAX_BIT)
+ return -EINVAL;
+
+ altivec_idle_wt = value;
+ smp_call_function_single(cpu, set_altivec_idle_wait_entry_bit,
+ &entry_bit, 1);
+
+ return count;
+}
+
+/*
+ * Enable/Disable interface:
+ * 0, disable. 1, enable.
+ */
+static DEVICE_ATTR(pw20_state, 0600, show_pw20_state, store_pw20_state);
+static DEVICE_ATTR(altivec_idle, 0600, show_altivec_idle, store_altivec_idle);
+
+/*
+ * Set wait time interface:(Nanosecond)
+ * Example: Base on TBfreq is 41MHZ.
+ * 1~48(ns): TB[63]
+ * 49~97(ns): TB[62]
+ * 98~195(ns): TB[61]
+ * 196~390(ns): TB[60]
+ * 391~780(ns): TB[59]
+ * 781~1560(ns): TB[58]
+ * ...
+ */
+static DEVICE_ATTR(pw20_wait_time, 0600,
+ show_pw20_wait_time,
+ store_pw20_wait_time);
+static DEVICE_ATTR(altivec_idle_wait_time, 0600,
+ show_altivec_idle_wait_time,
+ store_altivec_idle_wait_time);
+#endif
+
/*
* Enabling PMCs will slow partition context switch times so we only do
* it the first time we write to the PMCs.
@@ -407,6 +685,15 @@ static void register_cpu_online(unsigned int cpu)
device_create_file(s, &dev_attr_pir);
#endif /* CONFIG_PPC64 */
+#ifdef CONFIG_FSL_SOC
+ if (PVR_VER(cur_cpu_spec->pvr_value) == PVR_VER_E6500) {
+ device_create_file(s, &dev_attr_pw20_state);
+ device_create_file(s, &dev_attr_pw20_wait_time);
+
+ device_create_file(s, &dev_attr_altivec_idle);
+ device_create_file(s, &dev_attr_altivec_idle_wait_time);
+ }
+#endif
cacheinfo_cpu_online(cpu);
}
@@ -479,6 +766,15 @@ static void unregister_cpu_online(unsigned int cpu)
device_remove_file(s, &dev_attr_pir);
#endif /* CONFIG_PPC64 */
+#ifdef CONFIG_FSL_SOC
+ if (PVR_VER(cur_cpu_spec->pvr_value) == PVR_VER_E6500) {
+ device_remove_file(s, &dev_attr_pw20_state);
+ device_remove_file(s, &dev_attr_pw20_wait_time);
+
+ device_remove_file(s, &dev_attr_altivec_idle);
+ device_remove_file(s, &dev_attr_altivec_idle_wait_time);
+ }
+#endif
cacheinfo_cpu_offline(cpu);
}
--
1.8.0
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox