* [PATCH] powerpc/uaccess: Perform barrier_nospec() in KUAP allowance helpers
From: Christophe Leroy @ 2021-02-07 10:08 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman, cmr
Cc: linuxppc-dev, linux-kernel
barrier_nospec() in uaccess helpers is there to protect against
speculative accesses around access_ok().
When using user_access_begin() sequences together with
unsafe_get_user() like macros, barrier_nospec() is called for
every single read although we know the access_ok() is done
onece.
Since all user accesses must be granted by a call to either
allow_read_from_user() or allow_read_write_user() which will
always happen after the access_ok() check, move the barrier_nospec()
there.
Reported-by: Christopher M. Riedl <cmr@codefail.de>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/powerpc/include/asm/kup.h | 2 ++
arch/powerpc/include/asm/uaccess.h | 12 +-----------
2 files changed, 3 insertions(+), 11 deletions(-)
diff --git a/arch/powerpc/include/asm/kup.h b/arch/powerpc/include/asm/kup.h
index bf221a2a523e..7ec21af49a45 100644
--- a/arch/powerpc/include/asm/kup.h
+++ b/arch/powerpc/include/asm/kup.h
@@ -91,6 +91,7 @@ static __always_inline void setup_kup(void)
static inline void allow_read_from_user(const void __user *from, unsigned long size)
{
+ barrier_nospec();
allow_user_access(NULL, from, size, KUAP_READ);
}
@@ -102,6 +103,7 @@ static inline void allow_write_to_user(void __user *to, unsigned long size)
static inline void allow_read_write_user(void __user *to, const void __user *from,
unsigned long size)
{
+ barrier_nospec();
allow_user_access(to, from, size, KUAP_READ_WRITE);
}
diff --git a/arch/powerpc/include/asm/uaccess.h b/arch/powerpc/include/asm/uaccess.h
index 501c9a79038c..46123ae6a4c9 100644
--- a/arch/powerpc/include/asm/uaccess.h
+++ b/arch/powerpc/include/asm/uaccess.h
@@ -315,7 +315,6 @@ do { \
__chk_user_ptr(__gu_addr); \
if (!is_kernel_addr((unsigned long)__gu_addr)) \
might_fault(); \
- barrier_nospec(); \
if (do_allow) \
__get_user_size(__gu_val, __gu_addr, __gu_size, __gu_err); \
else \
@@ -333,10 +332,8 @@ do { \
__typeof__(size) __gu_size = (size); \
\
might_fault(); \
- if (access_ok(__gu_addr, __gu_size)) { \
- barrier_nospec(); \
+ if (access_ok(__gu_addr, __gu_size)) \
__get_user_size(__gu_val, __gu_addr, __gu_size, __gu_err); \
- } \
(x) = (__force __typeof__(*(ptr)))__gu_val; \
\
__gu_err; \
@@ -350,7 +347,6 @@ do { \
__typeof__(size) __gu_size = (size); \
\
__chk_user_ptr(__gu_addr); \
- barrier_nospec(); \
__get_user_size(__gu_val, __gu_addr, __gu_size, __gu_err); \
(x) = (__force __typeof__(*(ptr)))__gu_val; \
\
@@ -395,7 +391,6 @@ raw_copy_in_user(void __user *to, const void __user *from, unsigned long n)
{
unsigned long ret;
- barrier_nospec();
allow_read_write_user(to, from, n);
ret = __copy_tofrom_user(to, from, n);
prevent_read_write_user(to, from, n);
@@ -412,19 +407,15 @@ static inline unsigned long raw_copy_from_user(void *to,
switch (n) {
case 1:
- barrier_nospec();
__get_user_size(*(u8 *)to, from, 1, ret);
break;
case 2:
- barrier_nospec();
__get_user_size(*(u16 *)to, from, 2, ret);
break;
case 4:
- barrier_nospec();
__get_user_size(*(u32 *)to, from, 4, ret);
break;
case 8:
- barrier_nospec();
__get_user_size(*(u64 *)to, from, 8, ret);
break;
}
@@ -432,7 +423,6 @@ static inline unsigned long raw_copy_from_user(void *to,
return 0;
}
- barrier_nospec();
allow_read_from_user(from, n);
ret = __copy_tofrom_user((__force void __user *)to, from, n);
prevent_read_from_user(from, n);
--
2.25.0
^ permalink raw reply related
* Re: [PATCH 2/8] powerpc/signal: Add unsafe_copy_{vsx, fpr}_from_user()
From: Christophe Leroy @ 2021-02-07 10:12 UTC (permalink / raw)
To: Christopher M. Riedl, linuxppc-dev
In-Reply-To: <C92MQRHFCFEA.37OV051PFFY6@geist>
Le 06/02/2021 à 18:39, Christopher M. Riedl a écrit :
> On Sat Feb 6, 2021 at 10:32 AM CST, Christophe Leroy wrote:
>>
>>
>> Le 20/10/2020 à 04:01, Christopher M. Riedl a écrit :
>>> On Fri Oct 16, 2020 at 10:48 AM CDT, Christophe Leroy wrote:
>>>>
>>>>
>>>> Le 15/10/2020 à 17:01, Christopher M. Riedl a écrit :
>>>>> Reuse the "safe" implementation from signal.c except for calling
>>>>> unsafe_copy_from_user() to copy into a local buffer. Unlike the
>>>>> unsafe_copy_{vsx,fpr}_to_user() functions the "copy from" functions
>>>>> cannot use unsafe_get_user() directly to bypass the local buffer since
>>>>> doing so significantly reduces signal handling performance.
>>>>
>>>> Why can't the functions use unsafe_get_user(), why does it significantly
>>>> reduces signal handling
>>>> performance ? How much significant ? I would expect that not going
>>>> through an intermediate memory
>>>> area would be more efficient
>>>>
>>>
>>> Here is a comparison, 'unsafe-signal64-regs' avoids the intermediate buffer:
>>>
>>> | | hash | radix |
>>> | -------------------- | ------ | ------ |
>>> | linuxppc/next | 289014 | 158408 |
>>> | unsafe-signal64 | 298506 | 253053 |
>>> | unsafe-signal64-regs | 254898 | 220831 |
>>>
>>> I have not figured out the 'why' yet. As you mentioned in your series,
>>> technically calling __copy_tofrom_user() is overkill for these
>>> operations. The only obvious difference between unsafe_put_user() and
>>> unsafe_get_user() is that we don't have asm-goto for the 'get' variant.
>>> Instead we wrap with unsafe_op_wrap() which inserts a conditional and
>>> then goto to the label.
>>>
>>> Implemenations:
>>>
>>> #define unsafe_copy_fpr_from_user(task, from, label) do { \
>>> struct task_struct *__t = task; \
>>> u64 __user *buf = (u64 __user *)from; \
>>> int i; \
>>> \
>>> for (i = 0; i < ELF_NFPREG - 1; i++) \
>>> unsafe_get_user(__t->thread.TS_FPR(i), &buf[i], label); \
>>> unsafe_get_user(__t->thread.fp_state.fpscr, &buf[i], label); \
>>> } while (0)
>>>
>>> #define unsafe_copy_vsx_from_user(task, from, label) do { \
>>> struct task_struct *__t = task; \
>>> u64 __user *buf = (u64 __user *)from; \
>>> int i; \
>>> \
>>> for (i = 0; i < ELF_NVSRHALFREG ; i++) \
>>> unsafe_get_user(__t->thread.fp_state.fpr[i][TS_VSRLOWOFFSET], \
>>> &buf[i], label); \
>>> } while (0)
>>>
>>
>> Do you have CONFIG_PROVE_LOCKING or CONFIG_DEBUG_ATOMIC_SLEEP enabled in
>> your config ?
>
> I don't have these set in my config (ppc64le_defconfig). I think I
> figured this out - the reason for the lower signal throughput is the
> barrier_nospec() in __get_user_nocheck(). When looping we incur that
> cost on every iteration. Commenting it out results in signal performance
> of ~316K w/ hash on the unsafe-signal64-regs branch. Obviously the
> barrier is there for a reason but it is quite costly.
Interesting.
Can you try with the patch I just sent out
https://patchwork.ozlabs.org/project/linuxppc-dev/patch/c72f014730823b413528e90ab6c4d3bcb79f8497.1612692067.git.christophe.leroy@csgroup.eu/
Thanks
Christophe
^ permalink raw reply
* [PATCH v2 1/7] ASoC: soc-component: Add snd_soc_pcm_component_ack
From: Shengjiu Wang @ 2021-02-07 10:23 UTC (permalink / raw)
To: lgirdwood, broonie, perex, tiwai, alsa-devel, linux-kernel, timur,
nicoleotsuka, Xiubo.Lee, festevam, linuxppc-dev, robh+dt,
devicetree
In-Reply-To: <1612693435-31418-1-git-send-email-shengjiu.wang@nxp.com>
Add snd_soc_pcm_component_ack back, which can be used to get updated
buffer pointer in platform driver.
On Asymmetric multiprocessor, this pointer can be sent to Cortex-M
core for audio processing.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
include/sound/soc-component.h | 3 +++
sound/soc/soc-component.c | 14 ++++++++++++++
sound/soc/soc-pcm.c | 2 ++
3 files changed, 19 insertions(+)
diff --git a/include/sound/soc-component.h b/include/sound/soc-component.h
index 5b47768222b7..2dc8c7e3d1a6 100644
--- a/include/sound/soc-component.h
+++ b/include/sound/soc-component.h
@@ -146,6 +146,8 @@ struct snd_soc_component_driver {
int (*mmap)(struct snd_soc_component *component,
struct snd_pcm_substream *substream,
struct vm_area_struct *vma);
+ int (*ack)(struct snd_soc_component *component,
+ struct snd_pcm_substream *substream);
const struct snd_compress_ops *compress_ops;
@@ -498,5 +500,6 @@ int snd_soc_pcm_component_pm_runtime_get(struct snd_soc_pcm_runtime *rtd,
void *stream);
void snd_soc_pcm_component_pm_runtime_put(struct snd_soc_pcm_runtime *rtd,
void *stream, int rollback);
+int snd_soc_pcm_component_ack(struct snd_pcm_substream *substream);
#endif /* __SOC_COMPONENT_H */
diff --git a/sound/soc/soc-component.c b/sound/soc/soc-component.c
index 159bf88b9f8c..a9fbb2d26412 100644
--- a/sound/soc/soc-component.c
+++ b/sound/soc/soc-component.c
@@ -1212,3 +1212,17 @@ void snd_soc_pcm_component_pm_runtime_put(struct snd_soc_pcm_runtime *rtd,
soc_component_mark_pop(component, stream, pm);
}
}
+
+int snd_soc_pcm_component_ack(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
+ struct snd_soc_component *component;
+ int i;
+
+ /* FIXME: use 1st pointer */
+ for_each_rtd_components(rtd, i, component)
+ if (component->driver->ack)
+ return component->driver->ack(component, substream);
+
+ return 0;
+}
diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c
index b79f064887d4..605acec48971 100644
--- a/sound/soc/soc-pcm.c
+++ b/sound/soc/soc-pcm.c
@@ -2830,6 +2830,8 @@ int soc_new_pcm(struct snd_soc_pcm_runtime *rtd, int num)
rtd->ops.page = snd_soc_pcm_component_page;
if (drv->mmap)
rtd->ops.mmap = snd_soc_pcm_component_mmap;
+ if (drv->ack)
+ rtd->ops.ack = snd_soc_pcm_component_ack;
}
if (playback)
--
2.27.0
^ permalink raw reply related
* [PATCH v2 0/7] Add audio driver base on rpmsg on i.MX platform
From: Shengjiu Wang @ 2021-02-07 10:23 UTC (permalink / raw)
To: lgirdwood, broonie, perex, tiwai, alsa-devel, linux-kernel, timur,
nicoleotsuka, Xiubo.Lee, festevam, linuxppc-dev, robh+dt,
devicetree
On Asymmetric multiprocessor, there is Cortex-A core and Cortex-M core,
Linux is running on A core, RTOS is running on M core.
The audio hardware device can be controlled by Cortex-M device,
So audio playback/capture can be handled by M core.
Rpmsg is the interface for sending and receiving msg to and from M
core, that we can create a virtual sound on Cortex-A core side.
A core will tell the Cortex-M core sound format/rate/channel,
where is the data buffer, what is the period size, when to start,
when to stop and when suspend or resume happen, each of this behavior
there is defined rpmsg command.
Especially we designed the low power audio case, that is to
allocate a large buffer and fill the data, then Cortex-A core can go
to sleep mode, Cortex-M core continue to play the sound, when the
buffer is consumed, Cortex-M core will trigger the Cortex-A core to
wakeup to fill data.
changes in v2:
- update codes and comments according to Mark's comments
Shengjiu Wang (7):
ASoC: soc-component: Add snd_soc_pcm_component_ack
ASoC: fsl_rpmsg: Add CPU DAI driver for audio base on rpmsg
ASoC: dt-bindings: fsl_rpmsg: Add binding doc for rpmsg cpu dai driver
ASoC: imx-audio-rpmsg: Add rpmsg_driver for audio channel
ASoC: imx-pcm-rpmsg: Add platform driver for audio base on rpmsg
ASoC: imx-rpmsg: Add machine driver for audio base on rpmsg
ASoC: dt-bindings: imx-rpmsg: Add binding doc for rpmsg machine driver
.../devicetree/bindings/sound/fsl,rpmsg.yaml | 80 ++
.../bindings/sound/imx-audio-rpmsg.yaml | 48 +
include/sound/soc-component.h | 3 +
sound/soc/fsl/Kconfig | 28 +
sound/soc/fsl/Makefile | 6 +
sound/soc/fsl/fsl_rpmsg.c | 252 +++++
sound/soc/fsl/fsl_rpmsg.h | 38 +
sound/soc/fsl/imx-audio-rpmsg.c | 151 +++
sound/soc/fsl/imx-pcm-rpmsg.c | 919 ++++++++++++++++++
sound/soc/fsl/imx-pcm-rpmsg.h | 512 ++++++++++
sound/soc/fsl/imx-rpmsg.c | 148 +++
sound/soc/soc-component.c | 14 +
sound/soc/soc-pcm.c | 2 +
13 files changed, 2201 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml
create mode 100644 Documentation/devicetree/bindings/sound/imx-audio-rpmsg.yaml
create mode 100644 sound/soc/fsl/fsl_rpmsg.c
create mode 100644 sound/soc/fsl/fsl_rpmsg.h
create mode 100644 sound/soc/fsl/imx-audio-rpmsg.c
create mode 100644 sound/soc/fsl/imx-pcm-rpmsg.c
create mode 100644 sound/soc/fsl/imx-pcm-rpmsg.h
create mode 100644 sound/soc/fsl/imx-rpmsg.c
--
2.27.0
^ permalink raw reply
* [PATCH v2 2/7] ASoC: fsl_rpmsg: Add CPU DAI driver for audio base on rpmsg
From: Shengjiu Wang @ 2021-02-07 10:23 UTC (permalink / raw)
To: lgirdwood, broonie, perex, tiwai, alsa-devel, linux-kernel, timur,
nicoleotsuka, Xiubo.Lee, festevam, linuxppc-dev, robh+dt,
devicetree
In-Reply-To: <1612693435-31418-1-git-send-email-shengjiu.wang@nxp.com>
This is a cpu dai driver for rpmsg audio use case,
which is mainly used for getting the user's configuration
from devicetree and configure the clocks which is used by
Cortex-M core.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
sound/soc/fsl/Kconfig | 7 ++
sound/soc/fsl/Makefile | 2 +
sound/soc/fsl/fsl_rpmsg.c | 252 ++++++++++++++++++++++++++++++++++++++
sound/soc/fsl/fsl_rpmsg.h | 38 ++++++
4 files changed, 299 insertions(+)
create mode 100644 sound/soc/fsl/fsl_rpmsg.c
create mode 100644 sound/soc/fsl/fsl_rpmsg.h
diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index d7f30036d434..a688c3c2efbc 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -115,6 +115,13 @@ config SND_SOC_FSL_AUD2HTX
config SND_SOC_FSL_UTILS
tristate
+config SND_SOC_FSL_RPMSG
+ tristate "Audio Base on RPMSG support"
+ help
+ Say Y if you want to add rpmsg audio support for the Freescale CPUs.
+ This option is only useful for out-of-tree drivers since
+ in-tree drivers select it automatically.
+
config SND_SOC_IMX_PCM_DMA
tristate
select SND_SOC_GENERIC_DMAENGINE_PCM
diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile
index 8c5fa8a859c0..b63802f345cc 100644
--- a/sound/soc/fsl/Makefile
+++ b/sound/soc/fsl/Makefile
@@ -27,6 +27,7 @@ snd-soc-fsl-mqs-objs := fsl_mqs.o
snd-soc-fsl-easrc-objs := fsl_easrc.o
snd-soc-fsl-xcvr-objs := fsl_xcvr.o
snd-soc-fsl-aud2htx-objs := fsl_aud2htx.o
+snd-soc-fsl-rpmsg-objs := fsl_rpmsg.o
obj-$(CONFIG_SND_SOC_FSL_AUDMIX) += snd-soc-fsl-audmix.o
obj-$(CONFIG_SND_SOC_FSL_ASOC_CARD) += snd-soc-fsl-asoc-card.o
@@ -42,6 +43,7 @@ obj-$(CONFIG_SND_SOC_FSL_EASRC) += snd-soc-fsl-easrc.o
obj-$(CONFIG_SND_SOC_POWERPC_DMA) += snd-soc-fsl-dma.o
obj-$(CONFIG_SND_SOC_FSL_XCVR) += snd-soc-fsl-xcvr.o
obj-$(CONFIG_SND_SOC_FSL_AUD2HTX) += snd-soc-fsl-aud2htx.o
+obj-$(CONFIG_SND_SOC_FSL_RPMSG) += snd-soc-fsl-rpmsg.o
# MPC5200 Platform Support
obj-$(CONFIG_SND_MPC52xx_DMA) += mpc5200_dma.o
diff --git a/sound/soc/fsl/fsl_rpmsg.c b/sound/soc/fsl/fsl_rpmsg.c
new file mode 100644
index 000000000000..6e218344df0d
--- /dev/null
+++ b/sound/soc/fsl/fsl_rpmsg.c
@@ -0,0 +1,252 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2018-2021 NXP
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/pm_runtime.h>
+#include <linux/rpmsg.h>
+#include <linux/slab.h>
+#include <sound/core.h>
+#include <sound/dmaengine_pcm.h>
+#include <sound/pcm_params.h>
+
+#include "fsl_rpmsg.h"
+#include "imx-pcm.h"
+
+#define FSL_RPMSG_RATES (SNDRV_PCM_RATE_8000 | \
+ SNDRV_PCM_RATE_16000 | \
+ SNDRV_PCM_RATE_48000)
+#define FSL_RPMSG_FORMATS SNDRV_PCM_FMTBIT_S16_LE
+
+static const unsigned int fsl_rpmsg_rates[] = {
+ 8000, 11025, 16000, 22050, 44100,
+ 32000, 48000, 96000, 88200, 176400, 192000,
+ 352800, 384000, 705600, 768000, 1411200, 2822400,
+};
+
+static const struct snd_pcm_hw_constraint_list fsl_rpmsg_rate_constraints = {
+ .count = ARRAY_SIZE(fsl_rpmsg_rates),
+ .list = fsl_rpmsg_rates,
+};
+
+static int fsl_rpmsg_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct fsl_rpmsg *rpmsg = snd_soc_dai_get_drvdata(dai);
+ struct clk *p = rpmsg->mclk, *pll = 0, *npll = 0;
+ unsigned int rate = params_rate(params);
+ int ret;
+
+ /* Get current pll parent */
+ while (p && rpmsg->pll8k && rpmsg->pll11k) {
+ struct clk *pp = clk_get_parent(p);
+
+ if (clk_is_match(pp, rpmsg->pll8k) ||
+ clk_is_match(pp, rpmsg->pll11k)) {
+ pll = pp;
+ break;
+ }
+ p = pp;
+ }
+
+ /* Switch to another pll parent if needed. */
+ if (pll) {
+ npll = (do_div(rate, 8000) ? rpmsg->pll11k : rpmsg->pll8k);
+ if (!clk_is_match(pll, npll)) {
+ ret = clk_set_parent(p, npll);
+ if (ret < 0)
+ dev_warn(dai->dev, "failed to set parent %s: %d\n",
+ __clk_get_name(npll), ret);
+ }
+ }
+
+ ret = clk_prepare_enable(rpmsg->mclk);
+ if (ret)
+ dev_err(dai->dev, "failed to enable mclk: %d\n", ret);
+
+ return ret;
+}
+
+static int fsl_rpmsg_hw_free(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct fsl_rpmsg *rpmsg = snd_soc_dai_get_drvdata(dai);
+
+ clk_disable_unprepare(rpmsg->mclk);
+
+ return 0;
+}
+
+static int fsl_rpmsg_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *cpu_dai)
+{
+ int ret;
+
+ ret = snd_pcm_hw_constraint_list(substream->runtime, 0,
+ SNDRV_PCM_HW_PARAM_RATE,
+ &fsl_rpmsg_rate_constraints);
+
+ return ret;
+}
+
+static const struct snd_soc_dai_ops fsl_rpmsg_dai_ops = {
+ .startup = fsl_rpmsg_startup,
+ .hw_params = fsl_rpmsg_hw_params,
+ .hw_free = fsl_rpmsg_hw_free,
+};
+
+static struct snd_soc_dai_driver fsl_rpmsg_dai = {
+ .playback = {
+ .stream_name = "CPU-Playback",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_KNOT,
+ .formats = FSL_RPMSG_FORMATS,
+ },
+ .capture = {
+ .stream_name = "CPU-Capture",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_KNOT,
+ .formats = FSL_RPMSG_FORMATS,
+ },
+ .symmetric_rate = 1,
+ .symmetric_channels = 1,
+ .symmetric_sample_bits = 1,
+ .ops = &fsl_rpmsg_dai_ops,
+};
+
+static const struct snd_soc_component_driver fsl_component = {
+ .name = "fsl-rpmsg",
+};
+
+static const struct of_device_id fsl_rpmsg_ids[] = {
+ { .compatible = "fsl,imx7ulp-rpmsg"},
+ { .compatible = "fsl,imx8mm-rpmsg"},
+ { .compatible = "fsl,imx8mn-rpmsg"},
+ { .compatible = "fsl,imx8mp-rpmsg"},
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, fsl_rpmsg_ids);
+
+static int fsl_rpmsg_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct fsl_rpmsg *rpmsg;
+ int ret;
+
+ rpmsg = devm_kzalloc(&pdev->dev, sizeof(struct fsl_rpmsg), GFP_KERNEL);
+ if (!rpmsg)
+ return -ENOMEM;
+
+ ret = of_property_read_u32(np, "fsl,audioindex", &rpmsg->audioindex);
+ if (ret)
+ rpmsg->audioindex = 0;
+
+ if (of_property_read_u32(np, "fsl,buffer-size", &rpmsg->buffer_size))
+ rpmsg->buffer_size = IMX_DEFAULT_DMABUF_SIZE;
+
+ if (of_property_read_bool(pdev->dev.of_node, "fsl,enable-lpa"))
+ rpmsg->enable_lpa = 1;
+
+ ret = of_property_read_u32(np, "fsl,version", &rpmsg->version);
+ if (ret)
+ rpmsg->version = API_VERSION_V2;
+
+ /*Get the optional clocks */
+ rpmsg->ipg = devm_clk_get(&pdev->dev, "ipg");
+ if (IS_ERR(rpmsg->ipg))
+ rpmsg->ipg = NULL;
+
+ rpmsg->mclk = devm_clk_get(&pdev->dev, "mclk");
+ if (IS_ERR(rpmsg->mclk))
+ rpmsg->mclk = NULL;
+
+ rpmsg->dma = devm_clk_get(&pdev->dev, "dma");
+ if (IS_ERR(rpmsg->dma))
+ rpmsg->dma = NULL;
+
+ rpmsg->pll8k = devm_clk_get(&pdev->dev, "pll8k");
+ if (IS_ERR(rpmsg->pll8k))
+ rpmsg->pll8k = NULL;
+
+ rpmsg->pll11k = devm_clk_get(&pdev->dev, "pll11k");
+ if (IS_ERR(rpmsg->pll11k))
+ rpmsg->pll11k = NULL;
+
+ platform_set_drvdata(pdev, rpmsg);
+ pm_runtime_enable(&pdev->dev);
+
+ ret = devm_snd_soc_register_component(&pdev->dev, &fsl_component,
+ &fsl_rpmsg_dai, 1);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int fsl_rpmsg_runtime_resume(struct device *dev)
+{
+ struct fsl_rpmsg *rpmsg = dev_get_drvdata(dev);
+ int ret;
+
+ ret = clk_prepare_enable(rpmsg->ipg);
+ if (ret) {
+ dev_err(dev, "failed to enable ipg clock: %d\n", ret);
+ goto ipg_err;
+ }
+
+ ret = clk_prepare_enable(rpmsg->dma);
+ if (ret) {
+ dev_err(dev, "Failed to enable dma clock %d\n", ret);
+ goto dma_err;
+ }
+
+ return 0;
+
+dma_err:
+ clk_disable_unprepare(rpmsg->ipg);
+ipg_err:
+ return ret;
+}
+
+static int fsl_rpmsg_runtime_suspend(struct device *dev)
+{
+ struct fsl_rpmsg *rpmsg = dev_get_drvdata(dev);
+
+ clk_disable_unprepare(rpmsg->dma);
+ clk_disable_unprepare(rpmsg->ipg);
+
+ return 0;
+}
+#endif
+
+static const struct dev_pm_ops fsl_rpmsg_pm_ops = {
+ SET_RUNTIME_PM_OPS(fsl_rpmsg_runtime_suspend,
+ fsl_rpmsg_runtime_resume,
+ NULL)
+ SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
+};
+
+static struct platform_driver fsl_rpmsg_driver = {
+ .probe = fsl_rpmsg_probe,
+ .driver = {
+ .name = "fsl_rpmsg",
+ .pm = &fsl_rpmsg_pm_ops,
+ .of_match_table = fsl_rpmsg_ids,
+ },
+};
+module_platform_driver(fsl_rpmsg_driver);
+
+MODULE_DESCRIPTION("Freescale SoC Audio PRMSG CPU Interface");
+MODULE_AUTHOR("Shengjiu Wang <shengjiu.wang@nxp.com>");
+MODULE_ALIAS("platform:fsl_rpmsg");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/fsl/fsl_rpmsg.h b/sound/soc/fsl/fsl_rpmsg.h
new file mode 100644
index 000000000000..5648742def74
--- /dev/null
+++ b/sound/soc/fsl/fsl_rpmsg.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2017-2021 NXP
+ */
+
+#ifndef __FSL_RPMSG_H
+#define __FSL_RPMSG_H
+
+#define API_VERSION_V1 1
+#define API_VERSION_V2 2
+
+/*
+ * struct fsl_rpmsg - rpmsg private data
+ *
+ * @ipg: ipg clock for cpu dai (SAI)
+ * @mclk: master clock for cpu dai (SAI)
+ * @dma: clock for dma device
+ * @pll8k: parent clock for multiple of 8kHz frequency
+ * @pll11k: parent clock for multiple of 11kHz frequency
+ * @force_lpa: force enable low power audio routine if condition satisfy
+ * @enable_lpa: enable low power audio routine according to dts setting
+ * @buffer_size: pre allocated dma buffer size
+ * @audioindex: audio instance index
+ * @version: rpmsg image version
+ */
+struct fsl_rpmsg {
+ struct clk *ipg;
+ struct clk *mclk;
+ struct clk *dma;
+ struct clk *pll8k;
+ struct clk *pll11k;
+ int force_lpa;
+ int enable_lpa;
+ int buffer_size;
+ int audioindex;
+ int version;
+};
+#endif /* __FSL_RPMSG_H */
--
2.27.0
^ permalink raw reply related
* [PATCH v2 3/7] ASoC: dt-bindings: fsl_rpmsg: Add binding doc for rpmsg cpu dai driver
From: Shengjiu Wang @ 2021-02-07 10:23 UTC (permalink / raw)
To: lgirdwood, broonie, perex, tiwai, alsa-devel, linux-kernel, timur,
nicoleotsuka, Xiubo.Lee, festevam, linuxppc-dev, robh+dt,
devicetree
In-Reply-To: <1612693435-31418-1-git-send-email-shengjiu.wang@nxp.com>
fsl_rpmsg cpu dai driver is driver for rpmsg audio, which is mainly used
for getting the user's configuration from device tree and configure the
clocks which is used by Cortex-M core. So in this document define the
needed property.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
.../devicetree/bindings/sound/fsl,rpmsg.yaml | 80 +++++++++++++++++++
1 file changed, 80 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml
diff --git a/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml
new file mode 100644
index 000000000000..2d3ce10d42fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,rpmsg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Audio RPMSG CPU DAI Controller
+
+maintainers:
+ - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx7ulp-rpmsg
+ - fsl,imx8mn-rpmsg
+ - fsl,imx8mm-rpmsg
+ - fsl,imx8mp-rpmsg
+
+ clocks:
+ items:
+ - description: Peripheral clock for register access
+ - description: Master clock
+ - description: DMA clock for DMA register access
+ - description: Parent clock for multiple of 8kHz sample rates
+ - description: Parent clock for multiple of 11kHz sample rates
+ minItems: 5
+
+ clock-names:
+ items:
+ - const: ipg
+ - const: mclk
+ - const: dma
+ - const: pll8k
+ - const: pll11k
+ minItems: 5
+
+ power-domains:
+ maxItems: 1
+
+ fsl,audioindex:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: instance index for rpmsg image
+
+ fsl,version:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: rpmsg image version index
+
+ fsl,buffer-size:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: pre allocate dma buffer size
+
+ fsl,enable-lpa:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: enable low power audio path.
+
+ fsl,codec-type:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Sometimes the codec is registered by
+ driver not the device tree, this items
+ can be used to distinguish codecs
+
+required:
+ - compatible
+ - fsl,audioindex
+ - fsl,version
+ - fsl,buffer-size
+
+additionalProperties: false
+
+examples:
+ - |
+ rpmsg_audio: rpmsg_audio {
+ compatible = "fsl,imx8mn-rpmsg";
+ fsl,audioindex = <0> ;
+ fsl,version = <2>;
+ fsl,buffer-size = <0x6000000>;
+ fsl,enable-lpa;
+ status = "okay";
+ };
--
2.27.0
^ permalink raw reply related
* [PATCH v2 4/7] ASoC: imx-audio-rpmsg: Add rpmsg_driver for audio channel
From: Shengjiu Wang @ 2021-02-07 10:23 UTC (permalink / raw)
To: lgirdwood, broonie, perex, tiwai, alsa-devel, linux-kernel, timur,
nicoleotsuka, Xiubo.Lee, festevam, linuxppc-dev, robh+dt,
devicetree
In-Reply-To: <1612693435-31418-1-git-send-email-shengjiu.wang@nxp.com>
This driver is used to accept the message from rpmsg audio
channel, and if this driver is probed, it will help to register
the platform driver, the platform driver will use this
audio channel to send and receive message to and from Cortex-M
core.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
sound/soc/fsl/Kconfig | 4 +
sound/soc/fsl/Makefile | 1 +
sound/soc/fsl/imx-audio-rpmsg.c | 151 ++++++++++++++++++++++++++++++++
3 files changed, 156 insertions(+)
create mode 100644 sound/soc/fsl/imx-audio-rpmsg.c
diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index a688c3c2efbc..84d9f0f1f75b 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -126,6 +126,10 @@ config SND_SOC_IMX_PCM_DMA
tristate
select SND_SOC_GENERIC_DMAENGINE_PCM
+config SND_SOC_IMX_AUDIO_RPMSG
+ tristate
+ depends on RPMSG
+
config SND_SOC_IMX_AUDMUX
tristate "Digital Audio Mux module support"
help
diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile
index b63802f345cc..f08f3cd07ff5 100644
--- a/sound/soc/fsl/Makefile
+++ b/sound/soc/fsl/Makefile
@@ -60,6 +60,7 @@ obj-$(CONFIG_SND_SOC_IMX_AUDMUX) += snd-soc-imx-audmux.o
obj-$(CONFIG_SND_SOC_IMX_PCM_FIQ) += imx-pcm-fiq.o
obj-$(CONFIG_SND_SOC_IMX_PCM_DMA) += imx-pcm-dma.o
+obj-$(CONFIG_SND_SOC_IMX_AUDIO_RPMSG) += imx-audio-rpmsg.o
# i.MX Machine Support
snd-soc-eukrea-tlv320-objs := eukrea-tlv320.o
diff --git a/sound/soc/fsl/imx-audio-rpmsg.c b/sound/soc/fsl/imx-audio-rpmsg.c
new file mode 100644
index 000000000000..145edb1492b4
--- /dev/null
+++ b/sound/soc/fsl/imx-audio-rpmsg.c
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2017-2020 NXP
+
+#include <linux/module.h>
+#include <linux/rpmsg.h>
+#include "imx-pcm-rpmsg.h"
+
+/*
+ * struct imx_audio_rpmsg: private data
+ *
+ * @rpmsg_pdev: pointer of platform device
+ */
+struct imx_audio_rpmsg {
+ struct platform_device *rpmsg_pdev;
+};
+
+static int imx_audio_rpmsg_cb(struct rpmsg_device *rpdev, void *data, int len,
+ void *priv, u32 src)
+{
+ struct imx_audio_rpmsg *rpmsg = dev_get_drvdata(&rpdev->dev);
+ struct rpmsg_info *info = platform_get_drvdata(rpmsg->rpmsg_pdev);
+ struct rpmsg_r_msg *r_msg = (struct rpmsg_r_msg *)data;
+ struct rpmsg_msg *msg;
+ unsigned long flags;
+
+ dev_dbg(&rpdev->dev, "get from%d: cmd:%d. %d\n",
+ src, r_msg->header.cmd, r_msg->param.resp);
+
+ switch (r_msg->header.type) {
+ case MSG_TYPE_C:
+ /* TYPE C is notification from M core */
+ switch (r_msg->header.cmd) {
+ case TX_PERIOD_DONE:
+ spin_lock_irqsave(&info->lock[TX], flags);
+ msg = &info->msg[TX_PERIOD_DONE + MSG_TYPE_A_NUM];
+
+ /*
+ * Low power mode: get the buffer pointer from
+ * receive msg.
+ */
+ if (r_msg->header.major == 1 &&
+ r_msg->header.minor == 2)
+ msg->r_msg.param.buffer_tail =
+ r_msg->param.buffer_tail;
+ else
+ msg->r_msg.param.buffer_tail++;
+
+ msg->r_msg.param.buffer_tail %= info->num_period[TX];
+ spin_unlock_irqrestore(&info->lock[TX], flags);
+ info->callback[TX](info->callback_param[TX]);
+ break;
+ case RX_PERIOD_DONE:
+ spin_lock_irqsave(&info->lock[RX], flags);
+ msg = &info->msg[RX_PERIOD_DONE + MSG_TYPE_A_NUM];
+
+ if (r_msg->header.major == 1 &&
+ r_msg->header.minor == 2)
+ msg->r_msg.param.buffer_tail =
+ r_msg->param.buffer_tail;
+ else
+ msg->r_msg.param.buffer_tail++;
+
+ msg->r_msg.param.buffer_tail %= info->num_period[1];
+ spin_unlock_irqrestore(&info->lock[RX], flags);
+ info->callback[RX](info->callback_param[RX]);
+ break;
+ default:
+ dev_warn(&rpdev->dev, "unknown msg command\n");
+ break;
+ }
+ break;
+ case MSG_TYPE_B:
+ /* TYPE B is response msg */
+ memcpy(&info->r_msg, r_msg, sizeof(struct rpmsg_r_msg));
+ complete(&info->cmd_complete);
+ break;
+ default:
+ dev_warn(&rpdev->dev, "unknown msg type\n");
+ break;
+ }
+
+ return 0;
+}
+
+static int imx_audio_rpmsg_probe(struct rpmsg_device *rpdev)
+{
+ struct imx_audio_rpmsg *data;
+ int ret = 0;
+
+ dev_info(&rpdev->dev, "new channel: 0x%x -> 0x%x!\n",
+ rpdev->src, rpdev->dst);
+
+ data = devm_kzalloc(&rpdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ dev_set_drvdata(&rpdev->dev, data);
+
+ /* Register platform driver for rpmsg routine */
+ data->rpmsg_pdev = platform_device_register_data(&rpdev->dev,
+ IMX_PCM_DRV_NAME,
+ PLATFORM_DEVID_NONE,
+ NULL, 0);
+ if (IS_ERR(data->rpmsg_pdev)) {
+ dev_err(&rpdev->dev, "failed to register rpmsg platform.\n");
+ ret = PTR_ERR(data->rpmsg_pdev);
+ }
+
+ return ret;
+}
+
+static void imx_audio_rpmsg_remove(struct rpmsg_device *rpdev)
+{
+ struct imx_audio_rpmsg *data = dev_get_drvdata(&rpdev->dev);
+
+ if (data->rpmsg_pdev)
+ platform_device_unregister(data->rpmsg_pdev);
+
+ dev_info(&rpdev->dev, "audio rpmsg driver is removed\n");
+}
+
+static struct rpmsg_device_id imx_audio_rpmsg_id_table[] = {
+ { .name = "rpmsg-audio-channel" },
+ { },
+};
+
+static struct rpmsg_driver imx_audio_rpmsg_driver = {
+ .drv.name = "imx_audio_rpmsg",
+ .drv.owner = THIS_MODULE,
+ .id_table = imx_audio_rpmsg_id_table,
+ .probe = imx_audio_rpmsg_probe,
+ .callback = imx_audio_rpmsg_cb,
+ .remove = imx_audio_rpmsg_remove,
+};
+
+static int __init imx_audio_rpmsg_init(void)
+{
+ return register_rpmsg_driver(&imx_audio_rpmsg_driver);
+}
+
+static void __exit imx_audio_rpmsg_exit(void)
+{
+ unregister_rpmsg_driver(&imx_audio_rpmsg_driver);
+}
+module_init(imx_audio_rpmsg_init);
+module_exit(imx_audio_rpmsg_exit);
+
+MODULE_DESCRIPTION("Freescale SoC Audio RPMSG interface");
+MODULE_AUTHOR("Shengjiu Wang <shengjiu.wang@nxp.com>");
+MODULE_ALIAS("platform:imx_audio_rpmsg");
+MODULE_LICENSE("GPL v2");
--
2.27.0
^ permalink raw reply related
* [PATCH v2 5/7] ASoC: imx-pcm-rpmsg: Add platform driver for audio base on rpmsg
From: Shengjiu Wang @ 2021-02-07 10:23 UTC (permalink / raw)
To: lgirdwood, broonie, perex, tiwai, alsa-devel, linux-kernel, timur,
nicoleotsuka, Xiubo.Lee, festevam, linuxppc-dev, robh+dt,
devicetree
In-Reply-To: <1612693435-31418-1-git-send-email-shengjiu.wang@nxp.com>
platform driver base on rpmsg is the interface for sending and
receiving rpmsg to and from M core. It will tell the Cortex-M core
sound format/rate/channel, where is the data buffer, where is
the period size, when to start, when to stop and when suspend
or resume happen, each this behavior there is defined rpmsg
command.
Especially we designed the low power audio case, that is to
allocate a large buffer and fill the data, then Cortex-A core can go
to sleep mode, Cortex-M core continue to play the sound, when the
buffer is consumed, Cortex-M core will trigger the Cortex-A core to
wakeup.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
sound/soc/fsl/Kconfig | 5 +
sound/soc/fsl/Makefile | 1 +
sound/soc/fsl/imx-pcm-rpmsg.c | 919 ++++++++++++++++++++++++++++++++++
sound/soc/fsl/imx-pcm-rpmsg.h | 512 +++++++++++++++++++
4 files changed, 1437 insertions(+)
create mode 100644 sound/soc/fsl/imx-pcm-rpmsg.c
create mode 100644 sound/soc/fsl/imx-pcm-rpmsg.h
diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index 84d9f0f1f75b..749c44fc0759 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -130,6 +130,11 @@ config SND_SOC_IMX_AUDIO_RPMSG
tristate
depends on RPMSG
+config SND_SOC_IMX_PCM_RPMSG
+ tristate
+ depends on SND_SOC_IMX_AUDIO_RPMSG
+ select SND_SOC_GENERIC_DMAENGINE_PCM
+
config SND_SOC_IMX_AUDMUX
tristate "Digital Audio Mux module support"
help
diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile
index f08f3cd07ff5..ce4f4324c3a2 100644
--- a/sound/soc/fsl/Makefile
+++ b/sound/soc/fsl/Makefile
@@ -61,6 +61,7 @@ obj-$(CONFIG_SND_SOC_IMX_AUDMUX) += snd-soc-imx-audmux.o
obj-$(CONFIG_SND_SOC_IMX_PCM_FIQ) += imx-pcm-fiq.o
obj-$(CONFIG_SND_SOC_IMX_PCM_DMA) += imx-pcm-dma.o
obj-$(CONFIG_SND_SOC_IMX_AUDIO_RPMSG) += imx-audio-rpmsg.o
+obj-$(CONFIG_SND_SOC_IMX_PCM_RPMSG) += imx-pcm-rpmsg.o
# i.MX Machine Support
snd-soc-eukrea-tlv320-objs := eukrea-tlv320.o
diff --git a/sound/soc/fsl/imx-pcm-rpmsg.c b/sound/soc/fsl/imx-pcm-rpmsg.c
new file mode 100644
index 000000000000..f05d5d489560
--- /dev/null
+++ b/sound/soc/fsl/imx-pcm-rpmsg.c
@@ -0,0 +1,919 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2017-2021 NXP
+
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/rpmsg.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/dmaengine_pcm.h>
+#include <sound/soc.h>
+
+#include "imx-pcm.h"
+#include "fsl_rpmsg.h"
+#include "imx-pcm-rpmsg.h"
+
+static struct snd_pcm_hardware imx_rpmsg_pcm_hardware = {
+ .info = SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_NO_PERIOD_WAKEUP |
+ SNDRV_PCM_INFO_PAUSE |
+ SNDRV_PCM_INFO_RESUME,
+ .buffer_bytes_max = IMX_DEFAULT_DMABUF_SIZE,
+ .period_bytes_min = 512,
+ .period_bytes_max = 65536,
+ .periods_min = 2,
+ .periods_max = 6000,
+ .fifo_size = 0,
+};
+
+static int imx_rpmsg_pcm_send_message(struct rpmsg_msg *msg,
+ struct rpmsg_info *info)
+{
+ struct rpmsg_device *rpdev = info->rpdev;
+ int ret = 0;
+
+ mutex_lock(&info->msg_lock);
+ if (!rpdev) {
+ dev_err(info->dev, "rpmsg channel not ready\n");
+ mutex_unlock(&info->msg_lock);
+ return -EINVAL;
+ }
+
+ dev_dbg(&rpdev->dev, "send cmd %d\n", msg->s_msg.header.cmd);
+
+ if (!(msg->s_msg.header.type == MSG_TYPE_C))
+ reinit_completion(&info->cmd_complete);
+
+ ret = rpmsg_send(rpdev->ept, (void *)&msg->s_msg,
+ sizeof(struct rpmsg_s_msg));
+ if (ret) {
+ dev_err(&rpdev->dev, "rpmsg_send failed: %d\n", ret);
+ mutex_unlock(&info->msg_lock);
+ return ret;
+ }
+
+ /* No receive msg for TYPE_C command */
+ if (msg->s_msg.header.type == MSG_TYPE_C) {
+ mutex_unlock(&info->msg_lock);
+ return 0;
+ }
+
+ /* wait response from rpmsg */
+ ret = wait_for_completion_timeout(&info->cmd_complete,
+ msecs_to_jiffies(RPMSG_TIMEOUT));
+ if (!ret) {
+ dev_err(&rpdev->dev, "rpmsg_send cmd %d timeout!\n",
+ msg->s_msg.header.cmd);
+ mutex_unlock(&info->msg_lock);
+ return -ETIMEDOUT;
+ }
+
+ memcpy(&msg->r_msg, &info->r_msg, sizeof(struct rpmsg_r_msg));
+ memcpy(&info->msg[msg->r_msg.header.cmd].r_msg,
+ &msg->r_msg, sizeof(struct rpmsg_r_msg));
+
+ /*
+ * Reset the buffer pointer to be zero, actully we have
+ * set the buffer pointer to be zero in imx_rpmsg_terminate_all
+ * But if there is timer task queued in queue, after it is
+ * executed the buffer pointer will be changed, so need to
+ * reset it again with TERMINATE command.
+ */
+ switch (msg->s_msg.header.cmd) {
+ case TX_TERMINATE:
+ info->msg[TX_POINTER].r_msg.param.buffer_offset = 0;
+ break;
+ case RX_TERMINATE:
+ info->msg[RX_POINTER].r_msg.param.buffer_offset = 0;
+ break;
+ default:
+ break;
+ }
+
+ dev_dbg(&rpdev->dev, "cmd:%d, resp %d\n", msg->s_msg.header.cmd,
+ info->r_msg.param.resp);
+
+ mutex_unlock(&info->msg_lock);
+
+ return 0;
+}
+
+static int imx_rpmsg_insert_workqueue(struct snd_pcm_substream *substream,
+ struct rpmsg_msg *msg,
+ struct rpmsg_info *info)
+{
+ unsigned long flags;
+ int ret = 0;
+
+ /*
+ * Queue the work to workqueue.
+ * If the queue is full, drop the message.
+ */
+ spin_lock_irqsave(&info->wq_lock, flags);
+ if (info->work_write_index != info->work_read_index) {
+ int index = info->work_write_index;
+
+ memcpy(&info->work_list[index].msg, msg,
+ sizeof(struct rpmsg_s_msg));
+
+ queue_work(info->rpmsg_wq, &info->work_list[index].work);
+ info->work_write_index++;
+ info->work_write_index %= WORK_MAX_NUM;
+ } else {
+ info->msg_drop_count[substream->stream]++;
+ ret = -EPIPE;
+ }
+ spin_unlock_irqrestore(&info->wq_lock, flags);
+
+ return ret;
+}
+
+static int imx_rpmsg_pcm_hw_params(struct snd_soc_component *component,
+ struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct rpmsg_info *info = dev_get_drvdata(component->dev);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct rpmsg_msg *msg;
+ int ret = 0;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ msg = &info->msg[TX_HW_PARAM];
+ msg->s_msg.header.cmd = TX_HW_PARAM;
+ } else {
+ msg = &info->msg[RX_HW_PARAM];
+ msg->s_msg.header.cmd = RX_HW_PARAM;
+ }
+
+ msg->s_msg.param.rate = params_rate(params);
+
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ msg->s_msg.param.format = RPMSG_S16_LE;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ msg->s_msg.param.format = RPMSG_S24_LE;
+ break;
+ case SNDRV_PCM_FORMAT_DSD_U16_LE:
+ msg->s_msg.param.format = SNDRV_PCM_FORMAT_DSD_U16_LE;
+ break;
+ case SNDRV_PCM_FORMAT_DSD_U32_LE:
+ msg->s_msg.param.format = SNDRV_PCM_FORMAT_DSD_U32_LE;
+ break;
+ default:
+ msg->s_msg.param.format = RPMSG_S32_LE;
+ break;
+ }
+
+ switch (params_channels(params)) {
+ case 1:
+ msg->s_msg.param.channels = RPMSG_CH_LEFT;
+ break;
+ case 2:
+ msg->s_msg.param.channels = RPMSG_CH_STEREO;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
+ runtime->dma_bytes = params_buffer_bytes(params);
+
+ info->send_message(msg, info);
+
+ return ret;
+}
+
+static int imx_rpmsg_pcm_hw_free(struct snd_soc_component *component,
+ struct snd_pcm_substream *substream)
+{
+ snd_pcm_set_runtime_buffer(substream, NULL);
+ return 0;
+}
+
+static snd_pcm_uframes_t imx_rpmsg_pcm_pointer(struct snd_soc_component *component,
+ struct snd_pcm_substream *substream)
+{
+ struct rpmsg_info *info = dev_get_drvdata(component->dev);
+ struct rpmsg_msg *msg;
+ unsigned int pos = 0;
+ int buffer_tail = 0;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ msg = &info->msg[TX_PERIOD_DONE + MSG_TYPE_A_NUM];
+ else
+ msg = &info->msg[RX_PERIOD_DONE + MSG_TYPE_A_NUM];
+
+ buffer_tail = msg->r_msg.param.buffer_tail;
+ pos = buffer_tail * snd_pcm_lib_period_bytes(substream);
+
+ return bytes_to_frames(substream->runtime, pos);
+}
+
+static void imx_rpmsg_timer_callback(struct timer_list *t)
+{
+ struct stream_timer *stream_timer =
+ from_timer(stream_timer, t, timer);
+ struct snd_pcm_substream *substream = stream_timer->substream;
+ struct rpmsg_info *info = stream_timer->info;
+ struct rpmsg_msg *msg;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ msg = &info->msg[TX_PERIOD_DONE + MSG_TYPE_A_NUM];
+ msg->s_msg.header.cmd = TX_PERIOD_DONE;
+ } else {
+ msg = &info->msg[RX_PERIOD_DONE + MSG_TYPE_A_NUM];
+ msg->s_msg.header.cmd = RX_PERIOD_DONE;
+ }
+
+ imx_rpmsg_insert_workqueue(substream, msg, info);
+}
+
+static int imx_rpmsg_pcm_open(struct snd_soc_component *component,
+ struct snd_pcm_substream *substream)
+{
+ struct rpmsg_info *info = dev_get_drvdata(component->dev);
+ struct rpmsg_msg *msg;
+ int ret = 0;
+ int cmd;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ msg = &info->msg[TX_OPEN];
+ msg->s_msg.header.cmd = TX_OPEN;
+
+ /* reinitialize buffer counter*/
+ cmd = TX_PERIOD_DONE + MSG_TYPE_A_NUM;
+ info->msg[cmd].s_msg.param.buffer_tail = 0;
+ info->msg[cmd].r_msg.param.buffer_tail = 0;
+ info->msg[TX_POINTER].r_msg.param.buffer_offset = 0;
+
+ } else {
+ msg = &info->msg[RX_OPEN];
+ msg->s_msg.header.cmd = RX_OPEN;
+
+ /* reinitialize buffer counter*/
+ cmd = RX_PERIOD_DONE + MSG_TYPE_A_NUM;
+ info->msg[cmd].s_msg.param.buffer_tail = 0;
+ info->msg[cmd].r_msg.param.buffer_tail = 0;
+ info->msg[RX_POINTER].r_msg.param.buffer_offset = 0;
+ }
+
+ info->send_message(msg, info);
+
+ imx_rpmsg_pcm_hardware.period_bytes_max =
+ imx_rpmsg_pcm_hardware.buffer_bytes_max / 2;
+
+ snd_soc_set_runtime_hwparams(substream, &imx_rpmsg_pcm_hardware);
+
+ ret = snd_pcm_hw_constraint_integer(substream->runtime,
+ SNDRV_PCM_HW_PARAM_PERIODS);
+ if (ret < 0)
+ return ret;
+
+ info->msg_drop_count[substream->stream] = 0;
+
+ /* Create timer*/
+ info->stream_timer[substream->stream].info = info;
+ info->stream_timer[substream->stream].substream = substream;
+ timer_setup(&info->stream_timer[substream->stream].timer,
+ imx_rpmsg_timer_callback, 0);
+ return ret;
+}
+
+static int imx_rpmsg_pcm_close(struct snd_soc_component *component,
+ struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
+ struct rpmsg_info *info = dev_get_drvdata(component->dev);
+ struct rpmsg_msg *msg;
+ int ret = 0;
+
+ /* Flush work in workqueue to make TX_CLOSE is the last message */
+ flush_workqueue(info->rpmsg_wq);
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ msg = &info->msg[TX_CLOSE];
+ msg->s_msg.header.cmd = TX_CLOSE;
+ } else {
+ msg = &info->msg[RX_CLOSE];
+ msg->s_msg.header.cmd = RX_CLOSE;
+ }
+
+ info->send_message(msg, info);
+
+ del_timer(&info->stream_timer[substream->stream].timer);
+
+ rtd->dai_link->ignore_suspend = 0;
+
+ if (info->msg_drop_count[substream->stream])
+ dev_warn(rtd->dev, "Msg is dropped!, number is %d\n",
+ info->msg_drop_count[substream->stream]);
+
+ return ret;
+}
+
+static int imx_rpmsg_pcm_prepare(struct snd_soc_component *component,
+ struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+ struct fsl_rpmsg *rpmsg = dev_get_drvdata(cpu_dai->dev);
+
+ /*
+ * NON-MMAP mode, NONBLOCK, Version 2, enable lpa in dts
+ * four conditions to determine the lpa is enabled.
+ */
+ if ((runtime->access == SNDRV_PCM_ACCESS_RW_INTERLEAVED ||
+ runtime->access == SNDRV_PCM_ACCESS_RW_NONINTERLEAVED) &&
+ rpmsg->version == API_VERSION_V2 &&
+ rpmsg->enable_lpa) {
+ /*
+ * Ignore suspend operation in low power mode
+ * M core will continue playback music on A core suspend.
+ */
+ rtd->dai_link->ignore_suspend = 1;
+ rpmsg->force_lpa = 1;
+ } else {
+ rpmsg->force_lpa = 0;
+ }
+
+ return 0;
+}
+
+static int imx_rpmsg_pcm_mmap(struct snd_soc_component *component,
+ struct snd_pcm_substream *substream,
+ struct vm_area_struct *vma)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+
+ return dma_mmap_wc(substream->pcm->card->dev, vma,
+ runtime->dma_area,
+ runtime->dma_addr,
+ runtime->dma_bytes);
+}
+
+static void imx_rpmsg_pcm_dma_complete(void *arg)
+{
+ struct snd_pcm_substream *substream = arg;
+
+ snd_pcm_period_elapsed(substream);
+}
+
+static int imx_rpmsg_prepare_and_submit(struct snd_soc_component *component,
+ struct snd_pcm_substream *substream)
+{
+ struct rpmsg_info *info = dev_get_drvdata(component->dev);
+ struct rpmsg_msg *msg;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ msg = &info->msg[TX_BUFFER];
+ msg->s_msg.header.cmd = TX_BUFFER;
+ } else {
+ msg = &info->msg[RX_BUFFER];
+ msg->s_msg.header.cmd = RX_BUFFER;
+ }
+
+ /* Send buffer address and buffer size */
+ msg->s_msg.param.buffer_addr = substream->runtime->dma_addr;
+ msg->s_msg.param.buffer_size = snd_pcm_lib_buffer_bytes(substream);
+ msg->s_msg.param.period_size = snd_pcm_lib_period_bytes(substream);
+ msg->s_msg.param.buffer_tail = 0;
+
+ info->num_period[substream->stream] = msg->s_msg.param.buffer_size /
+ msg->s_msg.param.period_size;
+
+ info->callback[substream->stream] = imx_rpmsg_pcm_dma_complete;
+ info->callback_param[substream->stream] = substream;
+
+ return imx_rpmsg_insert_workqueue(substream, msg, info);
+}
+
+static int imx_rpmsg_async_issue_pending(struct snd_soc_component *component,
+ struct snd_pcm_substream *substream)
+{
+ struct rpmsg_info *info = dev_get_drvdata(component->dev);
+ struct rpmsg_msg *msg;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ msg = &info->msg[TX_START];
+ msg->s_msg.header.cmd = TX_START;
+ } else {
+ msg = &info->msg[RX_START];
+ msg->s_msg.header.cmd = RX_START;
+ }
+
+ return imx_rpmsg_insert_workqueue(substream, msg, info);
+}
+
+static int imx_rpmsg_restart(struct snd_soc_component *component,
+ struct snd_pcm_substream *substream)
+{
+ struct rpmsg_info *info = dev_get_drvdata(component->dev);
+ struct rpmsg_msg *msg;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ msg = &info->msg[TX_RESTART];
+ msg->s_msg.header.cmd = TX_RESTART;
+ } else {
+ msg = &info->msg[RX_RESTART];
+ msg->s_msg.header.cmd = RX_RESTART;
+ }
+
+ return imx_rpmsg_insert_workqueue(substream, msg, info);
+}
+
+static int imx_rpmsg_pause(struct snd_soc_component *component,
+ struct snd_pcm_substream *substream)
+{
+ struct rpmsg_info *info = dev_get_drvdata(component->dev);
+ struct rpmsg_msg *msg;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ msg = &info->msg[TX_PAUSE];
+ msg->s_msg.header.cmd = TX_PAUSE;
+ } else {
+ msg = &info->msg[RX_PAUSE];
+ msg->s_msg.header.cmd = RX_PAUSE;
+ }
+
+ return imx_rpmsg_insert_workqueue(substream, msg, info);
+}
+
+static int imx_rpmsg_terminate_all(struct snd_soc_component *component,
+ struct snd_pcm_substream *substream)
+{
+ struct rpmsg_info *info = dev_get_drvdata(component->dev);
+ struct rpmsg_msg *msg;
+ int cmd;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ msg = &info->msg[TX_TERMINATE];
+ msg->s_msg.header.cmd = TX_TERMINATE;
+ /* Clear buffer count*/
+ cmd = TX_PERIOD_DONE + MSG_TYPE_A_NUM;
+ info->msg[cmd].s_msg.param.buffer_tail = 0;
+ info->msg[cmd].r_msg.param.buffer_tail = 0;
+ info->msg[TX_POINTER].r_msg.param.buffer_offset = 0;
+ } else {
+ msg = &info->msg[RX_TERMINATE];
+ msg->s_msg.header.cmd = RX_TERMINATE;
+ /* Clear buffer count*/
+ cmd = RX_PERIOD_DONE + MSG_TYPE_A_NUM;
+ info->msg[cmd].s_msg.param.buffer_tail = 0;
+ info->msg[cmd].r_msg.param.buffer_tail = 0;
+ info->msg[RX_POINTER].r_msg.param.buffer_offset = 0;
+ }
+
+ del_timer(&info->stream_timer[substream->stream].timer);
+
+ return imx_rpmsg_insert_workqueue(substream, msg, info);
+}
+
+static int imx_rpmsg_pcm_trigger(struct snd_soc_component *component,
+ struct snd_pcm_substream *substream, int cmd)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+ struct fsl_rpmsg *rpmsg = dev_get_drvdata(cpu_dai->dev);
+ int ret = 0;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ ret = imx_rpmsg_prepare_and_submit(component, substream);
+ if (ret)
+ return ret;
+ ret = imx_rpmsg_async_issue_pending(component, substream);
+ break;
+ case SNDRV_PCM_TRIGGER_RESUME:
+ if (rpmsg->force_lpa)
+ break;
+ fallthrough;
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ ret = imx_rpmsg_restart(component, substream);
+ break;
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ if (!rpmsg->force_lpa) {
+ if (runtime->info & SNDRV_PCM_INFO_PAUSE)
+ ret = imx_rpmsg_pause(component, substream);
+ else
+ ret = imx_rpmsg_terminate_all(component, substream);
+ }
+ break;
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ ret = imx_rpmsg_pause(component, substream);
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ ret = imx_rpmsg_terminate_all(component, substream);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+/*
+ * imx_rpmsg_pcm_ack
+ *
+ * Send the period index to M core through rpmsg, but not send
+ * all the period index to M core, reduce some unnessesary msg
+ * to reduce the pressure of rpmsg bandwidth.
+ */
+static int imx_rpmsg_pcm_ack(struct snd_soc_component *component,
+ struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+ struct fsl_rpmsg *rpmsg = dev_get_drvdata(cpu_dai->dev);
+ struct rpmsg_info *info = dev_get_drvdata(component->dev);
+ snd_pcm_uframes_t period_size = runtime->period_size;
+ snd_pcm_sframes_t avail;
+ struct timer_list *timer;
+ struct rpmsg_msg *msg;
+ unsigned long flags;
+ int buffer_tail = 0;
+ int written_num = 0;
+
+ if (!rpmsg->force_lpa)
+ return 0;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ msg = &info->msg[TX_PERIOD_DONE + MSG_TYPE_A_NUM];
+ msg->s_msg.header.cmd = TX_PERIOD_DONE;
+ } else {
+ msg = &info->msg[RX_PERIOD_DONE + MSG_TYPE_A_NUM];
+ msg->s_msg.header.cmd = RX_PERIOD_DONE;
+ }
+
+ msg->s_msg.header.type = MSG_TYPE_C;
+
+ buffer_tail = (frames_to_bytes(runtime, runtime->control->appl_ptr) %
+ snd_pcm_lib_buffer_bytes(substream));
+ buffer_tail = buffer_tail / snd_pcm_lib_period_bytes(substream);
+
+ /* There is update for period index */
+ if (buffer_tail != msg->s_msg.param.buffer_tail) {
+ written_num = buffer_tail - msg->s_msg.param.buffer_tail;
+ if (written_num < 0)
+ written_num += runtime->periods;
+
+ msg->s_msg.param.buffer_tail = buffer_tail;
+
+ /* The notification message is updated to latest */
+ spin_lock_irqsave(&info->lock[substream->stream], flags);
+ memcpy(&info->notify[substream->stream], msg,
+ sizeof(struct rpmsg_s_msg));
+ info->notify_updated[substream->stream] = true;
+ spin_unlock_irqrestore(&info->lock[substream->stream], flags);
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ avail = snd_pcm_playback_hw_avail(runtime);
+ else
+ avail = snd_pcm_capture_hw_avail(runtime);
+
+ timer = &info->stream_timer[substream->stream].timer;
+ /*
+ * If the data in the buffer is less than one period before
+ * this fill, which means the data may not enough on M
+ * core side, we need to send message immediately to let
+ * M core know the pointer is updated.
+ * if there is more than one period data in the buffer before
+ * this fill, which means the data is enough on M core side,
+ * we can delay one period (using timer) to send the message
+ * for reduce the message number in workqueue, because the
+ * pointer may be updated by ack function later, we can
+ * send latest pointer to M core side.
+ */
+ if ((avail - written_num * period_size) <= period_size) {
+ imx_rpmsg_insert_workqueue(substream, msg, info);
+ } else if (rpmsg->force_lpa && !timer_pending(timer)) {
+ int time_msec;
+
+ time_msec = (int)(runtime->period_size * 1000 / runtime->rate);
+ mod_timer(timer, jiffies + msecs_to_jiffies(time_msec));
+ }
+ }
+
+ return 0;
+}
+
+static int imx_rpmsg_pcm_preallocate_dma_buffer(struct snd_pcm *pcm,
+ int stream, int size)
+{
+ struct snd_pcm_substream *substream = pcm->streams[stream].substream;
+ struct snd_dma_buffer *buf = &substream->dma_buffer;
+
+ buf->dev.type = SNDRV_DMA_TYPE_DEV;
+ buf->dev.dev = pcm->card->dev;
+ buf->private_data = NULL;
+ buf->area = dma_alloc_wc(pcm->card->dev, size,
+ &buf->addr, GFP_KERNEL);
+ if (!buf->area)
+ return -ENOMEM;
+
+ buf->bytes = size;
+ return 0;
+}
+
+static void imx_rpmsg_pcm_free_dma_buffers(struct snd_soc_component *component,
+ struct snd_pcm *pcm)
+{
+ struct snd_pcm_substream *substream;
+ struct snd_dma_buffer *buf;
+ int stream;
+
+ for (stream = SNDRV_PCM_STREAM_PLAYBACK;
+ stream < SNDRV_PCM_STREAM_LAST; stream++) {
+ substream = pcm->streams[stream].substream;
+ if (!substream)
+ continue;
+
+ buf = &substream->dma_buffer;
+ if (!buf->area)
+ continue;
+
+ dma_free_wc(pcm->card->dev, buf->bytes,
+ buf->area, buf->addr);
+ buf->area = NULL;
+ }
+}
+
+static int imx_rpmsg_pcm_new(struct snd_soc_component *component,
+ struct snd_soc_pcm_runtime *rtd)
+{
+ struct snd_card *card = rtd->card->snd_card;
+ struct snd_pcm *pcm = rtd->pcm;
+ struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+ struct fsl_rpmsg *rpmsg = dev_get_drvdata(cpu_dai->dev);
+ int ret;
+
+ ret = dma_coerce_mask_and_coherent(card->dev, DMA_BIT_MASK(32));
+ if (ret)
+ return ret;
+
+ if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream) {
+ ret = imx_rpmsg_pcm_preallocate_dma_buffer(pcm, SNDRV_PCM_STREAM_PLAYBACK,
+ rpmsg->buffer_size);
+ if (ret)
+ goto out;
+ }
+
+ if (pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream) {
+ ret = imx_rpmsg_pcm_preallocate_dma_buffer(pcm, SNDRV_PCM_STREAM_CAPTURE,
+ rpmsg->buffer_size);
+ if (ret)
+ goto out;
+ }
+
+ imx_rpmsg_pcm_hardware.buffer_bytes_max = rpmsg->buffer_size;
+out:
+ /* free preallocated buffers in case of error */
+ if (ret)
+ imx_rpmsg_pcm_free_dma_buffers(component, pcm);
+
+ return ret;
+}
+
+static const struct snd_soc_component_driver imx_rpmsg_soc_component = {
+ .name = IMX_PCM_DRV_NAME,
+ .pcm_construct = imx_rpmsg_pcm_new,
+ .pcm_destruct = imx_rpmsg_pcm_free_dma_buffers,
+ .open = imx_rpmsg_pcm_open,
+ .close = imx_rpmsg_pcm_close,
+ .hw_params = imx_rpmsg_pcm_hw_params,
+ .hw_free = imx_rpmsg_pcm_hw_free,
+ .trigger = imx_rpmsg_pcm_trigger,
+ .pointer = imx_rpmsg_pcm_pointer,
+ .mmap = imx_rpmsg_pcm_mmap,
+ .ack = imx_rpmsg_pcm_ack,
+ .prepare = imx_rpmsg_pcm_prepare,
+};
+
+static void imx_rpmsg_pcm_work(struct work_struct *work)
+{
+ struct work_of_rpmsg *work_of_rpmsg;
+ bool is_notification = false;
+ struct rpmsg_info *info;
+ struct rpmsg_msg msg;
+ unsigned long flags;
+
+ work_of_rpmsg = container_of(work, struct work_of_rpmsg, work);
+ info = work_of_rpmsg->info;
+
+ /*
+ * Every work in the work queue, first we check if there
+ * is update for period is filled, because there may be not
+ * enough data in M core side, need to let M core know
+ * data is updated immediately.
+ */
+ spin_lock_irqsave(&info->lock[TX], flags);
+ if (info->notify_updated[TX]) {
+ memcpy(&msg, &info->notify[TX], sizeof(struct rpmsg_s_msg));
+ info->notify_updated[TX] = false;
+ spin_unlock_irqrestore(&info->lock[TX], flags);
+ info->send_message(&msg, info);
+ } else {
+ spin_unlock_irqrestore(&info->lock[TX], flags);
+ }
+
+ spin_lock_irqsave(&info->lock[RX], flags);
+ if (info->notify_updated[RX]) {
+ memcpy(&msg, &info->notify[RX], sizeof(struct rpmsg_s_msg));
+ info->notify_updated[RX] = false;
+ spin_unlock_irqrestore(&info->lock[RX], flags);
+ info->send_message(&msg, info);
+ } else {
+ spin_unlock_irqrestore(&info->lock[RX], flags);
+ }
+
+ /* Skip the notification message for it has been processed above */
+ if (work_of_rpmsg->msg.s_msg.header.type == MSG_TYPE_C &&
+ (work_of_rpmsg->msg.s_msg.header.cmd == TX_PERIOD_DONE ||
+ work_of_rpmsg->msg.s_msg.header.cmd == RX_PERIOD_DONE))
+ is_notification = true;
+
+ if (!is_notification)
+ info->send_message(&work_of_rpmsg->msg, info);
+
+ /* update read index */
+ spin_lock_irqsave(&info->wq_lock, flags);
+ info->work_read_index++;
+ info->work_read_index %= WORK_MAX_NUM;
+ spin_unlock_irqrestore(&info->wq_lock, flags);
+}
+
+static int imx_rpmsg_pcm_probe(struct platform_device *pdev)
+{
+ struct snd_soc_component *component;
+ struct rpmsg_info *info;
+ int ret, i;
+
+ info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, info);
+
+ info->rpdev = container_of(pdev->dev.parent, struct rpmsg_device, dev);
+ info->dev = &pdev->dev;
+ /* Setup work queue */
+ info->rpmsg_wq = alloc_ordered_workqueue("rpmsg_audio",
+ WQ_HIGHPRI |
+ WQ_UNBOUND |
+ WQ_FREEZABLE);
+ if (!info->rpmsg_wq) {
+ dev_err(&pdev->dev, "workqueue create failed\n");
+ return -ENOMEM;
+ }
+
+ /* Write index initialize 1, make it differ with the read index */
+ info->work_write_index = 1;
+ info->send_message = imx_rpmsg_pcm_send_message;
+
+ for (i = 0; i < WORK_MAX_NUM; i++) {
+ INIT_WORK(&info->work_list[i].work, imx_rpmsg_pcm_work);
+ info->work_list[i].info = info;
+ }
+
+ /* Initialize msg */
+ for (i = 0; i < MSG_MAX_NUM; i++) {
+ info->msg[i].s_msg.header.cate = IMX_RPMSG_AUDIO;
+ info->msg[i].s_msg.header.major = IMX_RMPSG_MAJOR;
+ info->msg[i].s_msg.header.minor = IMX_RMPSG_MINOR;
+ info->msg[i].s_msg.header.type = MSG_TYPE_A;
+ info->msg[i].s_msg.param.audioindex = 0;
+ }
+
+ init_completion(&info->cmd_complete);
+ mutex_init(&info->msg_lock);
+ spin_lock_init(&info->lock[TX]);
+ spin_lock_init(&info->lock[RX]);
+ spin_lock_init(&info->wq_lock);
+
+ ret = devm_snd_soc_register_component(&pdev->dev,
+ &imx_rpmsg_soc_component,
+ NULL, 0);
+ if (ret)
+ goto fail;
+
+ component = snd_soc_lookup_component(&pdev->dev, IMX_PCM_DRV_NAME);
+ if (!component) {
+ ret = -EINVAL;
+ goto fail;
+ }
+#ifdef CONFIG_DEBUG_FS
+ component->debugfs_prefix = "rpmsg";
+#endif
+
+ return 0;
+
+fail:
+ if (info->rpmsg_wq)
+ destroy_workqueue(info->rpmsg_wq);
+
+ return ret;
+}
+
+static int imx_rpmsg_pcm_remove(struct platform_device *pdev)
+{
+ struct rpmsg_info *info = platform_get_drvdata(pdev);
+
+ if (info->rpmsg_wq)
+ destroy_workqueue(info->rpmsg_wq);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int imx_rpmsg_pcm_runtime_resume(struct device *dev)
+{
+ struct rpmsg_info *info = dev_get_drvdata(dev);
+
+ cpu_latency_qos_add_request(&info->pm_qos_req, 0);
+
+ return 0;
+}
+
+static int imx_rpmsg_pcm_runtime_suspend(struct device *dev)
+{
+ struct rpmsg_info *info = dev_get_drvdata(dev);
+
+ cpu_latency_qos_remove_request(&info->pm_qos_req);
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+static int imx_rpmsg_pcm_suspend(struct device *dev)
+{
+ struct rpmsg_info *info = dev_get_drvdata(dev);
+ struct rpmsg_msg *rpmsg_tx;
+ struct rpmsg_msg *rpmsg_rx;
+
+ rpmsg_tx = &info->msg[TX_SUSPEND];
+ rpmsg_rx = &info->msg[RX_SUSPEND];
+
+ rpmsg_tx->s_msg.header.cmd = TX_SUSPEND;
+ info->send_message(rpmsg_tx, info);
+
+ rpmsg_rx->s_msg.header.cmd = RX_SUSPEND;
+ info->send_message(rpmsg_rx, info);
+
+ return 0;
+}
+
+static int imx_rpmsg_pcm_resume(struct device *dev)
+{
+ struct rpmsg_info *info = dev_get_drvdata(dev);
+ struct rpmsg_msg *rpmsg_tx;
+ struct rpmsg_msg *rpmsg_rx;
+
+ rpmsg_tx = &info->msg[TX_RESUME];
+ rpmsg_rx = &info->msg[RX_RESUME];
+
+ rpmsg_tx->s_msg.header.cmd = TX_RESUME;
+ info->send_message(rpmsg_tx, info);
+
+ rpmsg_rx->s_msg.header.cmd = RX_RESUME;
+ info->send_message(rpmsg_rx, info);
+
+ return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static const struct dev_pm_ops imx_rpmsg_pcm_pm_ops = {
+ SET_RUNTIME_PM_OPS(imx_rpmsg_pcm_runtime_suspend,
+ imx_rpmsg_pcm_runtime_resume,
+ NULL)
+ SET_SYSTEM_SLEEP_PM_OPS(imx_rpmsg_pcm_suspend,
+ imx_rpmsg_pcm_resume)
+};
+
+static struct platform_driver imx_pcm_rpmsg_driver = {
+ .probe = imx_rpmsg_pcm_probe,
+ .remove = imx_rpmsg_pcm_remove,
+ .driver = {
+ .name = IMX_PCM_DRV_NAME,
+ .pm = &imx_rpmsg_pcm_pm_ops,
+ },
+};
+module_platform_driver(imx_pcm_rpmsg_driver);
+
+MODULE_DESCRIPTION("Freescale SoC Audio RPMSG PCM interface");
+MODULE_AUTHOR("Shengjiu Wang <shengjiu.wang@nxp.com>");
+MODULE_ALIAS("platform:" IMX_PCM_DRV_NAME);
+MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/fsl/imx-pcm-rpmsg.h b/sound/soc/fsl/imx-pcm-rpmsg.h
new file mode 100644
index 000000000000..308d153920a3
--- /dev/null
+++ b/sound/soc/fsl/imx-pcm-rpmsg.h
@@ -0,0 +1,512 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2017-2021 NXP
+ *
+ ******************************************************************************
+ * Communication stack of audio with rpmsg
+ ******************************************************************************
+ * Packet structure:
+ * A SRTM message consists of a 10 bytes header followed by 0~N bytes of data
+ *
+ * +---------------+-------------------------------+
+ * | | Content |
+ * +---------------+-------------------------------+
+ * | Byte Offset | 7 6 5 4 3 2 1 0 |
+ * +---------------+---+---+---+---+---+---+---+---+
+ * | 0 | Category |
+ * +---------------+---+---+---+---+---+---+---+---+
+ * | 1 ~ 2 | Version |
+ * +---------------+---+---+---+---+---+---+---+---+
+ * | 3 | Type |
+ * +---------------+---+---+---+---+---+---+---+---+
+ * | 4 | Command |
+ * +---------------+---+---+---+---+---+---+---+---+
+ * | 5 | Reserved0 |
+ * +---------------+---+---+---+---+---+---+---+---+
+ * | 6 | Reserved1 |
+ * +---------------+---+---+---+---+---+---+---+---+
+ * | 7 | Reserved2 |
+ * +---------------+---+---+---+---+---+---+---+---+
+ * | 8 | Reserved3 |
+ * +---------------+---+---+---+---+---+---+---+---+
+ * | 9 | Reserved4 |
+ * +---------------+---+---+---+---+---+---+---+---+
+ * | 10 | DATA 0 |
+ * +---------------+---+---+---+---+---+---+---+---+
+ * : : : : : : : : : : : : :
+ * +---------------+---+---+---+---+---+---+---+---+
+ * | N + 10 - 1 | DATA N-1 |
+ * +---------------+---+---+---+---+---+---+---+---+
+ *
+ * +----------+------------+------------------------------------------------+
+ * | Field | Byte | |
+ * +----------+------------+------------------------------------------------+
+ * | Category | 0 | The destination category. |
+ * +----------+------------+------------------------------------------------+
+ * | Version | 1 ~ 2 | The category version of the sender of the |
+ * | | | packet. |
+ * | | | The first byte represent the major version of |
+ * | | | the packet.The second byte represent the minor |
+ * | | | version of the packet. |
+ * +----------+------------+------------------------------------------------+
+ * | Type | 3 | The message type of current message packet. |
+ * +----------+------------+------------------------------------------------+
+ * | Command | 4 | The command byte sent to remote processor/SoC. |
+ * +----------+------------+------------------------------------------------+
+ * | Reserved | 5 ~ 9 | Reserved field for future extension. |
+ * +----------+------------+------------------------------------------------+
+ * | Data | N | The data payload of the message packet. |
+ * +----------+------------+------------------------------------------------+
+ *
+ * Audio control:
+ * SRTM Audio Control Category Request Command Table:
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | Category | Version | Type | Command | Data | Function |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x00 | 0x00 | Data[0]: Audio Device Index | Open a TX Instance. |
+ * | | | | | Data[1]: format | |
+ * | | | | | Data[2]: channels | |
+ * | | | | | Data[3-6]: samplerate | |
+ * | | | | | Data[7-10]: buffer_addr | |
+ * | | | | | Data[11-14]: buffer_size | |
+ * | | | | | Data[15-18]: period_size | |
+ * | | | | | Data[19-22]: buffer_tail | |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x00 | 0x01 | Data[0]: Audio Device Index | Start a TX Instance. |
+ * | | | | | Same as above command | |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x00 | 0x02 | Data[0]: Audio Device Index | Pause a TX Instance. |
+ * | | | | | Same as above command | |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x00 | 0x03 | Data[0]: Audio Device Index | Resume a TX Instance. |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x00 | 0x04 | Data[0]: Audio Device Index | Stop a TX Instance. |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x00 | 0x05 | Data[0]: Audio Device Index | Close a TX Instance. |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x00 | 0x06 | Data[0]: Audio Device Index | Set Parameters for |
+ * | | | | | Data[1]: format | a TX Instance. |
+ * | | | | | Data[2]: channels | |
+ * | | | | | Data[3-6]: samplerate | |
+ * | | | | | Data[7-22]: reserved | |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x00 | 0x07 | Data[0]: Audio Device Index | Set TX Buffer. |
+ * | | | | | Data[1-6]: reserved | |
+ * | | | | | Data[7-10]: buffer_addr | |
+ * | | | | | Data[11-14]: buffer_size | |
+ * | | | | | Data[15-18]: period_size | |
+ * | | | | | Data[19-22]: buffer_tail | |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x00 | 0x08 | Data[0]: Audio Device Index | Suspend a TX Instance |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x00 | 0x09 | Data[0]: Audio Device Index | Resume a TX Instance. |
+ * | | | | | Data[1]: format | |
+ * | | | | | Data[2]: channels | |
+ * | | | | | Data[3-6]: samplerate | |
+ * | | | | | Data[7-10]: buffer_addr | |
+ * | | | | | Data[11-14]: buffer_size | |
+ * | | | | | Data[15-18]: period_size | |
+ * | | | | | Data[19-22]: buffer_tail | |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x00 | 0x0A | Data[0]: Audio Device Index | Open a RX Instance. |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x00 | 0x0B | Data[0]: Audio Device Index | Start a RX Instance. |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x00 | 0x0C | Data[0]: Audio Device Index | Pause a RX Instance. |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x00 | 0x0D | Data[0]: Audio Device Index | Resume a RX Instance. |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x00 | 0x0E | Data[0]: Audio Device Index | Stop a RX Instance. |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x00 | 0x0F | Data[0]: Audio Device Index | Close a RX Instance. |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x00 | 0x10 | Data[0]: Audio Device Index | Set Parameters for |
+ * | | | | | Data[1]: format | a RX Instance. |
+ * | | | | | Data[2]: channels | |
+ * | | | | | Data[3-6]: samplerate | |
+ * | | | | | Data[7-22]: reserved | |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x00 | 0x11 | Data[0]: Audio Device Index | Set RX Buffer. |
+ * | | | | | Data[1-6]: reserved | |
+ * | | | | | Data[7-10]: buffer_addr | |
+ * | | | | | Data[11-14]: buffer_size | |
+ * | | | | | Data[15-18]: period_size | |
+ * | | | | | Data[19-22]: buffer_tail | |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x00 | 0x12 | Data[0]: Audio Device Index | Suspend a RX Instance.|
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x00 | 0x13 | Data[0]: Audio Device Index | Resume a RX Instance. |
+ * | | | | | Data[1]: format | |
+ * | | | | | Data[2]: channels | |
+ * | | | | | Data[3-6]: samplerate | |
+ * | | | | | Data[7-10]: buffer_addr | |
+ * | | | | | Data[11-14]: buffer_size | |
+ * | | | | | Data[15-18]: period_size | |
+ * | | | | | Data[19-22]: buffer_tail | |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x00 | 0x14 | Data[0]: Audio Device Index | Set register value |
+ * | | | | | Data[1-6]: reserved | to codec |
+ * | | | | | Data[7-10]: register | |
+ * | | | | | Data[11-14]: value | |
+ * | | | | | Data[15-22]: reserved | |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x00 | 0x15 | Data[0]: Audio Device Index | Get register value |
+ * | | | | | Data[1-6]: reserved | from codec |
+ * | | | | | Data[7-10]: register | |
+ * | | | | | Data[11-22]: reserved | |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * Note 1: See <List of Sample Format> for available value of
+ * Sample Format;
+ * Note 2: See <List of Audio Channels> for available value of Channels;
+ * Note 3: Sample Rate of Set Parameters for an Audio TX Instance
+ * Command and Set Parameters for an Audio RX Instance Command is
+ * in little-endian format.
+ *
+ * SRTM Audio Control Category Response Command Table:
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | Category | Version | Type | Command | Data | Function |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x01 | 0x00 | Data[0]: Audio Device Index | Reply for Open |
+ * | | | | | Data[1]: Return code | a TX Instance |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x01 | 0x01 | Data[0]: Audio Device Index | Reply for Start |
+ * | | | | | Data[1]: Return code | a TX Instance |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x01 | 0x02 | Data[0]: Audio Device Index | Reply for Pause |
+ * | | | | | Data[1]: Return code | a TX Instance |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x01 | 0x03 | Data[0]: Audio Device Index | Reply for Resume |
+ * | | | | | Data[1]: Return code | a TX Instance |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x01 | 0x04 | Data[0]: Audio Device Index | Reply for Stop |
+ * | | | | | Data[1]: Return code | a TX Instance |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x01 | 0x05 | Data[0]: Audio Device Index | Reply for Close |
+ * | | | | | Data[1]: Return code | a TX Instance |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x01 | 0x06 | Data[0]: Audio Device Index | Reply for Set Param |
+ * | | | | | Data[1]: Return code | for a TX Instance. |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x01 | 0x07 | Data[0]: Audio Device Index | Reply for Set |
+ * | | | | | Data[1]: Return code | TX Buffer |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x01 | 0x08 | Data[0]: Audio Device Index | Reply for Suspend |
+ * | | | | | Data[1]: Return code | a TX Instance |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x01 | 0x09 | Data[0]: Audio Device Index | Reply for Resume |
+ * | | | | | Data[1]: Return code | a TX Instance |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x01 | 0x0A | Data[0]: Audio Device Index | Reply for Open |
+ * | | | | | Data[1]: Return code | a TX Instance |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x01 | 0x0B | Data[0]: Audio Device Index | Reply for Start |
+ * | | | | | Data[1]: Return code | a TX Instance |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x01 | 0x0C | Data[0]: Audio Device Index | Reply for Pause |
+ * | | | | | Data[1]: Return code | a TX Instance |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x01 | 0x0D | Data[0]: Audio Device Index | Reply for Resume |
+ * | | | | | Data[1]: Return code | a RX Instance |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x01 | 0x0E | Data[0]: Audio Device Index | Reply for Stop |
+ * | | | | | Data[1]: Return code | a RX Instance |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x01 | 0x0F | Data[0]: Audio Device Index | Reply for Close |
+ * | | | | | Data[1]: Return code | a RX Instance |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x01 | 0x10 | Data[0]: Audio Device Index | Reply for Set Param |
+ * | | | | | Data[1]: Return code | for a RX Instance. |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x01 | 0x11 | Data[0]: Audio Device Index | Reply for Set |
+ * | | | | | Data[1]: Return code | RX Buffer |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x01 | 0x12 | Data[0]: Audio Device Index | Reply for Suspend |
+ * | | | | | Data[1]: Return code | a RX Instance |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x01 | 0x13 | Data[0]: Audio Device Index | Reply for Resume |
+ * | | | | | Data[1]: Return code | a RX Instance |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x01 | 0x14 | Data[0]: Audio Device Index | Reply for Set codec |
+ * | | | | | Data[1]: Return code | register value |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x01 | 0x15 | Data[0]: Audio Device Index | Reply for Get codec |
+ * | | | | | Data[1]: Return code | register value |
+ * | | | | | Data[2-6]: reserved | |
+ * | | | | | Data[7-10]: register | |
+ * | | | | | Data[11-14]: value | |
+ * | | | | | Data[15-22]: reserved | |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ *
+ * SRTM Audio Control Category Notification Command Table:
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | Category | Version | Type | Command | Data | Function |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x02 | 0x00 | Data[0]: Audio Device Index | Notify one TX period |
+ * | | | | | | is finished |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ * | 0x03 | 0x0100 | 0x02 | 0x01 | Data[0]: Audio Device Index | Notify one RX period |
+ * | | | | | | is finished |
+ * +----------+---------+------+---------+-------------------------------+-----------------------+
+ *
+ * List of Sample Format:
+ * +------------------+-----------------------+
+ * | Sample Format | Description |
+ * +------------------+-----------------------+
+ * | 0x0 | S16_LE |
+ * +------------------+-----------------------+
+ * | 0x1 | S24_LE |
+ * +------------------+-----------------------+
+ *
+ * List of Audio Channels
+ * +------------------+-----------------------+
+ * | Audio Channel | Description |
+ * +------------------+-----------------------+
+ * | 0x0 | Left Channel |
+ * +------------------+-----------------------+
+ * | 0x1 | Right Channel |
+ * +------------------+---------------- ------+
+ * | 0x2 | Left & Right Channel |
+ * +------------------+-----------------------+
+ *
+ */
+
+#ifndef _IMX_PCM_RPMSG_H
+#define _IMX_PCM_RPMSG_H
+
+#include <linux/pm_qos.h>
+#include <linux/interrupt.h>
+#include <sound/dmaengine_pcm.h>
+
+#define RPMSG_TIMEOUT 1000
+
+/* RPMSG Command (TYPE A)*/
+#define TX_OPEN 0x0
+#define TX_START 0x1
+#define TX_PAUSE 0x2
+#define TX_RESTART 0x3
+#define TX_TERMINATE 0x4
+#define TX_CLOSE 0x5
+#define TX_HW_PARAM 0x6
+#define TX_BUFFER 0x7
+#define TX_SUSPEND 0x8
+#define TX_RESUME 0x9
+
+#define RX_OPEN 0xA
+#define RX_START 0xB
+#define RX_PAUSE 0xC
+#define RX_RESTART 0xD
+#define RX_TERMINATE 0xE
+#define RX_CLOSE 0xF
+#define RX_HW_PARAM 0x10
+#define RX_BUFFER 0x11
+#define RX_SUSPEND 0x12
+#define RX_RESUME 0x13
+#define SET_CODEC_VALUE 0x14
+#define GET_CODEC_VALUE 0x15
+#define TX_POINTER 0x16
+#define RX_POINTER 0x17
+/* Total msg numver for type A */
+#define MSG_TYPE_A_NUM 0x18
+
+/* RPMSG Command (TYPE C)*/
+#define TX_PERIOD_DONE 0x0
+#define RX_PERIOD_DONE 0x1
+/* Total msg numver for type C */
+#define MSG_TYPE_C_NUM 0x2
+
+#define MSG_MAX_NUM (MSG_TYPE_A_NUM + MSG_TYPE_C_NUM)
+
+#define MSG_TYPE_A 0x0
+#define MSG_TYPE_B 0x1
+#define MSG_TYPE_C 0x2
+
+#define RESP_NONE 0x0
+#define RESP_NOT_ALLOWED 0x1
+#define RESP_SUCCESS 0x2
+#define RESP_FAILED 0x3
+
+#define RPMSG_S16_LE 0x0
+#define RPMSG_S24_LE 0x1
+#define RPMSG_S32_LE 0x2
+#define RPMSG_DSD_U16_LE 0x3
+#define RPMSG_DSD_U24_LE 0x4
+#define RPMSG_DSD_U32_LE 0x5
+
+#define RPMSG_CH_LEFT 0x0
+#define RPMSG_CH_RIGHT 0x1
+#define RPMSG_CH_STEREO 0x2
+
+#define WORK_MAX_NUM 0x30
+
+/* Category define */
+#define IMX_RMPSG_LIFECYCLE 1
+#define IMX_RPMSG_PMIC 2
+#define IMX_RPMSG_AUDIO 3
+#define IMX_RPMSG_KEY 4
+#define IMX_RPMSG_GPIO 5
+#define IMX_RPMSG_RTC 6
+#define IMX_RPMSG_SENSOR 7
+
+/* rpmsg version */
+#define IMX_RMPSG_MAJOR 1
+#define IMX_RMPSG_MINOR 0
+
+#define TX SNDRV_PCM_STREAM_PLAYBACK
+#define RX SNDRV_PCM_STREAM_CAPTURE
+
+/**
+ * struct rpmsg_head: rpmsg header structure
+ *
+ * @cate: category
+ * @major: major version
+ * @minor: minor version
+ * @type: message type (A/B/C)
+ * @cmd: message command
+ * @reserved: reserved space
+ */
+struct rpmsg_head {
+ u8 cate;
+ u8 major;
+ u8 minor;
+ u8 type;
+ u8 cmd;
+ u8 reserved[5];
+} __packed;
+
+/**
+ * struct param_s: sent rpmsg parameter
+ *
+ * @audioindex: audio instance index
+ * @format: audio format
+ * @channels: audio channel number
+ * @rate: sample rate
+ * @buffer_addr: dma buffer physical address or register for SET_CODEC_VALUE
+ * @buffer_size: dma buffer size or register value for SET_CODEC_VALUE
+ * @period_size: period size
+ * @buffer_tail: current period index
+ */
+struct param_s {
+ unsigned char audioindex;
+ unsigned char format;
+ unsigned char channels;
+ unsigned int rate;
+ unsigned int buffer_addr;
+ unsigned int buffer_size;
+ unsigned int period_size;
+ unsigned int buffer_tail;
+} __packed;
+
+/**
+ * struct param_s: send rpmsg parameter
+ *
+ * @audioindex: audio instance index
+ * @resp: response value
+ * @reserved1: reserved space
+ * @buffer_offset: the consumed offset of buffer
+ * @reg_addr: register addr of codec
+ * @reg_data: register value of codec
+ * @reserved2: reserved space
+ * @buffer_tail: current period index
+ */
+struct param_r {
+ unsigned char audioindex;
+ unsigned char resp;
+ unsigned char reserved1[1];
+ unsigned int buffer_offset;
+ unsigned int reg_addr;
+ unsigned int reg_data;
+ unsigned char reserved2[4];
+ unsigned int buffer_tail;
+} __packed;
+
+/* Struct of sent message */
+struct rpmsg_s_msg {
+ struct rpmsg_head header;
+ struct param_s param;
+};
+
+/* Struct of received message */
+struct rpmsg_r_msg {
+ struct rpmsg_head header;
+ struct param_r param;
+};
+
+/* Struct of rpmsg */
+struct rpmsg_msg {
+ struct rpmsg_s_msg s_msg;
+ struct rpmsg_r_msg r_msg;
+};
+
+/* Struct of rpmsg for workqueue */
+struct work_of_rpmsg {
+ struct rpmsg_info *info;
+ /* Sent msg for each work */
+ struct rpmsg_msg msg;
+ struct work_struct work;
+};
+
+/* Struct of timer */
+struct stream_timer {
+ struct timer_list timer;
+ struct rpmsg_info *info;
+ struct snd_pcm_substream *substream;
+};
+
+typedef void (*dma_callback)(void *arg);
+
+/**
+ * struct rpmsg_info: rpmsg audio information
+ *
+ * @rpdev: pointer of rpmsg_device
+ * @dev: pointer for imx_pcm_rpmsg device
+ * @cmd_complete: command is finished
+ * @pm_qos_req: request of pm qos
+ * @r_msg: received rpmsg
+ * @msg: array of rpmsg
+ * @notify: notification msg (type C) for TX & RX
+ * @notify_updated: notification flag for TX & RX
+ * @rpmsg_wq: rpmsg workqueue
+ * @work_list: array of work list for workqueue
+ * @work_write_index: write index of work list
+ * @work_read_index: read index of work list
+ * @msg_drop_count: counter of dropped msg for TX & RX
+ * @num_period: period number for TX & RX
+ * @callback_param: parameter for period elapse callback for TX & RX
+ * @callback: period elapse callback for TX & RX
+ * @send_message: function pointer for send message
+ * @lock: spin lock for TX & RX
+ * @wq_lock: lock for work queue
+ * @msg_lock: lock for send message
+ * @stream_timer: timer for tigger workqueue
+ */
+struct rpmsg_info {
+ struct rpmsg_device *rpdev;
+ struct device *dev;
+ struct completion cmd_complete;
+ struct pm_qos_request pm_qos_req;
+
+ /* Received msg (global) */
+ struct rpmsg_r_msg r_msg;
+ struct rpmsg_msg msg[MSG_MAX_NUM];
+ /* period done */
+ struct rpmsg_msg notify[2];
+ bool notify_updated[2];
+
+ struct workqueue_struct *rpmsg_wq;
+ struct work_of_rpmsg work_list[WORK_MAX_NUM];
+ int work_write_index;
+ int work_read_index;
+ int msg_drop_count[2];
+ int num_period[2];
+ void *callback_param[2];
+ dma_callback callback[2];
+ int (*send_message)(struct rpmsg_msg *msg, struct rpmsg_info *info);
+ spinlock_t lock[2]; /* spin lock for resource protection */
+ spinlock_t wq_lock; /* spin lock for resource protection */
+ struct mutex msg_lock; /* mutex for resource protection */
+ struct stream_timer stream_timer[2];
+};
+
+#define IMX_PCM_DRV_NAME "imx_pcm_rpmsg"
+
+#endif /* IMX_PCM_RPMSG_H */
--
2.27.0
^ permalink raw reply related
* [PATCH v2 7/7] ASoC: dt-bindings: imx-rpmsg: Add binding doc for rpmsg machine driver
From: Shengjiu Wang @ 2021-02-07 10:23 UTC (permalink / raw)
To: lgirdwood, broonie, perex, tiwai, alsa-devel, linux-kernel, timur,
nicoleotsuka, Xiubo.Lee, festevam, linuxppc-dev, robh+dt,
devicetree
In-Reply-To: <1612693435-31418-1-git-send-email-shengjiu.wang@nxp.com>
Imx-rpmsg is a new added machine driver for supporting audio on Cortex-M
core. The Cortex-M core will control the audio interface, DMA and audio
codec, setup the pipeline, the audio driver on Cortex-A core side is just
to communitcate with M core, it is a virtual sound card and don't touch
the hardware.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
.../bindings/sound/imx-audio-rpmsg.yaml | 48 +++++++++++++++++++
1 file changed, 48 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/imx-audio-rpmsg.yaml
diff --git a/Documentation/devicetree/bindings/sound/imx-audio-rpmsg.yaml b/Documentation/devicetree/bindings/sound/imx-audio-rpmsg.yaml
new file mode 100644
index 000000000000..b941aeb80678
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/imx-audio-rpmsg.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/imx-audio-rpmsg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX audio complex with rpmsg
+
+maintainers:
+ - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx-audio-rpmsg
+
+ model:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: User specified audio sound card name
+
+ audio-cpu:
+ description: The phandle of an CPU DAI controller
+
+ rpmsg-out:
+ description: |
+ This is a boolean property. If present, the transmitting function
+ will be enabled,
+
+ rpmsg-in:
+ description: |
+ This is a boolean property. If present, the receiving function
+ will be enabled.
+
+required:
+ - compatible
+ - model
+ - audio-cpu
+
+additionalProperties: false
+
+examples:
+ - |
+ sound-rpmsg {
+ compatible = "fsl,imx-audio-rpmsg";
+ model = "ak4497-audio";
+ audio-cpu = <&rpmsg_audio>;
+ rpmsg-out;
+ };
--
2.27.0
^ permalink raw reply related
* [PATCH v2 6/7] ASoC: imx-rpmsg: Add machine driver for audio base on rpmsg
From: Shengjiu Wang @ 2021-02-07 10:23 UTC (permalink / raw)
To: lgirdwood, broonie, perex, tiwai, alsa-devel, linux-kernel, timur,
nicoleotsuka, Xiubo.Lee, festevam, linuxppc-dev, robh+dt,
devicetree
In-Reply-To: <1612693435-31418-1-git-send-email-shengjiu.wang@nxp.com>
The platform device is not registered by device tree or
cpu dai driver, it is registered by the rpmsg channel,
So add a dedicated machine driver to handle this case.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
sound/soc/fsl/Kconfig | 12 ++++
sound/soc/fsl/Makefile | 2 +
sound/soc/fsl/imx-rpmsg.c | 148 ++++++++++++++++++++++++++++++++++++++
3 files changed, 162 insertions(+)
create mode 100644 sound/soc/fsl/imx-rpmsg.c
diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index 749c44fc0759..3557866d3fa2 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -334,6 +334,18 @@ config SND_SOC_IMX_HDMI
Say Y if you want to add support for SoC audio on an i.MX board with
IMX HDMI.
+config SND_SOC_IMX_RPMSG
+ tristate "SoC Audio support for i.MX boards with rpmsg"
+ depends on RPMSG
+ select SND_SOC_IMX_PCM_RPMSG
+ select SND_SOC_IMX_AUDIO_RPMSG
+ select SND_SOC_FSL_RPMSG
+ help
+ SoC Audio support for i.MX boards with rpmsg.
+ There should be rpmsg devices defined in other core (M core)
+ Say Y if you want to add support for SoC audio on an i.MX board with
+ a rpmsg devices.
+
endif # SND_IMX_SOC
endmenu
diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile
index ce4f4324c3a2..f146ce464acd 100644
--- a/sound/soc/fsl/Makefile
+++ b/sound/soc/fsl/Makefile
@@ -70,6 +70,7 @@ snd-soc-imx-sgtl5000-objs := imx-sgtl5000.o
snd-soc-imx-spdif-objs := imx-spdif.o
snd-soc-imx-audmix-objs := imx-audmix.o
snd-soc-imx-hdmi-objs := imx-hdmi.o
+snd-soc-imx-rpmsg-objs := imx-rpmsg.o
obj-$(CONFIG_SND_SOC_EUKREA_TLV320) += snd-soc-eukrea-tlv320.o
obj-$(CONFIG_SND_SOC_IMX_ES8328) += snd-soc-imx-es8328.o
@@ -77,3 +78,4 @@ obj-$(CONFIG_SND_SOC_IMX_SGTL5000) += snd-soc-imx-sgtl5000.o
obj-$(CONFIG_SND_SOC_IMX_SPDIF) += snd-soc-imx-spdif.o
obj-$(CONFIG_SND_SOC_IMX_AUDMIX) += snd-soc-imx-audmix.o
obj-$(CONFIG_SND_SOC_IMX_HDMI) += snd-soc-imx-hdmi.o
+obj-$(CONFIG_SND_SOC_IMX_RPMSG) += snd-soc-imx-rpmsg.o
diff --git a/sound/soc/fsl/imx-rpmsg.c b/sound/soc/fsl/imx-rpmsg.c
new file mode 100644
index 000000000000..a87dcbce4f36
--- /dev/null
+++ b/sound/soc/fsl/imx-rpmsg.c
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2017-2020 NXP
+
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/of_reserved_mem.h>
+#include <linux/i2c.h>
+#include <linux/of_gpio.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <sound/soc.h>
+#include <sound/jack.h>
+#include <sound/control.h>
+#include <sound/pcm_params.h>
+#include <sound/soc-dapm.h>
+#include "imx-pcm-rpmsg.h"
+
+struct imx_rpmsg {
+ struct snd_soc_dai_link dai;
+ struct snd_soc_card card;
+};
+
+static int imx_rpmsg_probe(struct platform_device *pdev)
+{
+ struct snd_soc_dai_link_component *dlc;
+ struct platform_device *cpu_pdev;
+ struct of_phandle_args args;
+ struct device_node *cpu_np;
+ struct imx_rpmsg *data;
+ int ret;
+
+ dlc = devm_kzalloc(&pdev->dev, 3 * sizeof(*dlc), GFP_KERNEL);
+ if (!dlc)
+ return -ENOMEM;
+
+ cpu_np = of_parse_phandle(pdev->dev.of_node, "audio-cpu", 0);
+ if (!cpu_np) {
+ dev_err(&pdev->dev, "cpu dai phandle missing or invalid\n");
+ ret = -EINVAL;
+ goto fail;
+ }
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ cpu_pdev = of_find_device_by_node(cpu_np);
+ if (!cpu_pdev) {
+ dev_err(&pdev->dev, "failed to find rpmsg platform device\n");
+ ret = -EINVAL;
+ goto fail;
+ }
+
+ ret = of_reserved_mem_device_init_by_idx(&pdev->dev, pdev->dev.of_node, 0);
+ if (ret)
+ dev_warn(&pdev->dev, "no reserved DMA memory\n");
+
+ data->dai.cpus = &dlc[0];
+ data->dai.num_cpus = 1;
+ data->dai.platforms = &dlc[1];
+ data->dai.num_platforms = 1;
+ data->dai.codecs = &dlc[2];
+ data->dai.num_codecs = 1;
+
+ data->dai.name = "rpmsg hifi";
+ data->dai.stream_name = "rpmsg hifi";
+ data->dai.dai_fmt = SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBS_CFS;
+
+ /* Optional codec node */
+ ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node,
+ "audio-codec", 0, 0, &args);
+ if (ret) {
+ data->dai.codecs->dai_name = "snd-soc-dummy-dai";
+ data->dai.codecs->name = "snd-soc-dummy";
+ } else {
+ data->dai.codecs->of_node = args.np;
+ ret = snd_soc_get_dai_name(&args, &data->dai.codecs->dai_name);
+ if (ret) {
+ dev_err(&pdev->dev, "Unable to get codec_dai_name\n");
+ goto fail;
+ }
+ }
+
+ data->dai.cpus->dai_name = dev_name(&cpu_pdev->dev);
+ data->dai.platforms->name = IMX_PCM_DRV_NAME;
+ data->dai.playback_only = true;
+ data->dai.capture_only = true;
+ data->card.num_links = 1;
+ data->card.dai_link = &data->dai;
+
+ if (of_property_read_bool(pdev->dev.of_node, "rpmsg-out"))
+ data->dai.capture_only = false;
+
+ if (of_property_read_bool(pdev->dev.of_node, "rpmsg-in"))
+ data->dai.playback_only = false;
+
+ if (data->dai.playback_only && data->dai.capture_only) {
+ dev_err(&pdev->dev, "no enabled rpmsg DAI link\n");
+ ret = -EINVAL;
+ goto fail;
+ }
+
+ data->card.dev = &pdev->dev;
+ data->card.owner = THIS_MODULE;
+ ret = snd_soc_of_parse_card_name(&data->card, "model");
+ if (ret)
+ goto fail;
+
+ platform_set_drvdata(pdev, &data->card);
+ snd_soc_card_set_drvdata(&data->card, data);
+ ret = devm_snd_soc_register_card(&pdev->dev, &data->card);
+ if (ret) {
+ dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret);
+ goto fail;
+ }
+
+fail:
+ if (cpu_np)
+ of_node_put(cpu_np);
+ return ret;
+}
+
+static const struct of_device_id imx_rpmsg_dt_ids[] = {
+ { .compatible = "fsl,imx-audio-rpmsg", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx_rpmsg_dt_ids);
+
+static struct platform_driver imx_rpmsg_driver = {
+ .driver = {
+ .name = "imx-audio-rpmsg",
+ .owner = THIS_MODULE,
+ .pm = &snd_soc_pm_ops,
+ .of_match_table = imx_rpmsg_dt_ids,
+ },
+ .probe = imx_rpmsg_probe,
+};
+module_platform_driver(imx_rpmsg_driver);
+
+MODULE_DESCRIPTION("Freescale SoC Audio RPMSG Machine Driver");
+MODULE_AUTHOR("Shengjiu Wang <shengjiu.wang@nxp.com>");
+MODULE_ALIAS("platform:imx-rpmsg");
+MODULE_LICENSE("GPL v2");
--
2.27.0
^ permalink raw reply related
* Re: [PATCH] ASoC: fsl: constify static snd_soc_dai_ops structs
From: Shengjiu Wang @ 2021-02-07 10:37 UTC (permalink / raw)
To: Rikard Falkeborn
Cc: alsa-devel, Timur Tabi, Xiubo Li, Liam Girdwood, linuxppc-dev,
Takashi Iwai, Jaroslav Kysela, Nicolin Chen, Mark Brown,
Fabio Estevam, linux-kernel
In-Reply-To: <20210206225849.51071-1-rikard.falkeborn@gmail.com>
On Sun, Feb 7, 2021 at 6:58 AM Rikard Falkeborn
<rikard.falkeborn@gmail.com> wrote:
>
> The only usage of these is to assign their address to the 'ops' field in
> the snd_soc_dai_driver struct, which is a pointer to const. Make them
> const to allow the compiler to put them in read-only memory.
>
> Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
^ permalink raw reply
* Re: [PATCH v7 39/42] powerpc: move NMI entry/exit code into wrapper
From: Nicholas Piggin @ 2021-02-07 12:54 UTC (permalink / raw)
To: linuxppc-dev, Michael Ellerman; +Cc: Athira Rajeev
In-Reply-To: <1612579435.unncvipdys.astroid@bobo.none>
Excerpts from Nicholas Piggin's message of February 6, 2021 12:46 pm:
> Excerpts from Michael Ellerman's message of February 6, 2021 9:38 am:
>> Nicholas Piggin <npiggin@gmail.com> writes:
>>> Excerpts from Michael Ellerman's message of February 4, 2021 8:15 pm:
>>>> Nicholas Piggin <npiggin@gmail.com> writes:
>>>>> This moves the common NMI entry and exit code into the interrupt handler
>>>>> wrappers.
>>>>>
>>>>> This changes the behaviour of soft-NMI (watchdog) and HMI interrupts, and
>>>>> also MCE interrupts on 64e, by adding missing parts of the NMI entry to
>>>>> them.
>>>>>
>>>>> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
>>>>> ---
>>>>> arch/powerpc/include/asm/interrupt.h | 28 ++++++++++++++++++++++
>>>>> arch/powerpc/kernel/mce.c | 11 ---------
>>>>> arch/powerpc/kernel/traps.c | 35 +++++-----------------------
>>>>> arch/powerpc/kernel/watchdog.c | 10 ++++----
>>>>> 4 files changed, 38 insertions(+), 46 deletions(-)
>>>>
>>>> This is unhappy when injecting SLB multi-hits:
>>>>
>>>> root@p86-2:~# echo PPC_SLB_MULTIHIT > /sys/kernel/debug/provoke-crash/DIRECT
>>>> [ 312.496026][ T1344] kernel BUG at arch/powerpc/include/asm/interrupt.h:152!
>>>> [ 312.496037][ T1344] Oops: Exception in kernel mode, sig: 5 [#1]
>>>> [ 312.496045][ T1344] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
>>>
>>> pseries hash. Blast!
>>
>> The worst kind.
>>
>>>> 147 static inline void interrupt_nmi_exit_prepare(struct pt_regs *regs, struct interrupt_nmi_state *state)
>>>> 148 {
>>>> 149 if (!IS_ENABLED(CONFIG_PPC_BOOK3S_64) ||
>>>> 150 !firmware_has_feature(FW_FEATURE_LPAR) ||
>>>> 151 radix_enabled() || (mfmsr() & MSR_DR))
>>>> 152 nmi_exit();
>>>>
>>>>
>>>> So presumably it's:
>>>>
>>>> #define __nmi_exit() \
>>>> do { \
>>>> BUG_ON(!in_nmi()); \
>>>
>>> Yes that would be it, pseries machine check enables MMU half way through
>>> so only one side of this triggers.
>>>
>>> The MSR_DR check is supposed to catch the other NMIs that run with MMU
>>> on (perf, watchdog, etc). Suppose it could test TRAP(regs) explicitly
>>> although I wonder if we should also do this to keep things balanced
>>
>> Yeah I think I like that. I'll give it a test.
>
> The msr restore? Looking closer, pseries_machine_check_realmode may have
> expected mce_handle_error to enable the MMU, because irq_work_queue uses
> some per-cpu variables I think.
>
> So the code might have to be rearranged a bit more than the patch below.
Here is a patch, it should go anywhere before this patch. Seems to
work with some test MCE injection on pseries hash.
Thanks,
Nick
--
powerpc/pseries/mce: restore msr before returning from handler
The pseries real-mode machine check handler can enable the MMU, and
return from the handler with the MMU still enabled.
This works, but real-mode handler wrapper exit handlers want to rely
on the MMU being in real-mode. So change the pseries handler to
restore the MSR after it has finished virtual mode tasks.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/platforms/pseries/ras.c | 19 +++++++++++++++----
1 file changed, 15 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c
index 2d9f985fd13a..377439e88598 100644
--- a/arch/powerpc/platforms/pseries/ras.c
+++ b/arch/powerpc/platforms/pseries/ras.c
@@ -722,6 +722,7 @@ static int mce_handle_error(struct pt_regs *regs, struct rtas_error_log *errp)
struct pseries_errorlog *pseries_log;
struct pseries_mc_errorlog *mce_log = NULL;
int disposition = rtas_error_disposition(errp);
+ unsigned long msr;
u8 error_type;
if (!rtas_error_extended(errp))
@@ -747,9 +748,21 @@ static int mce_handle_error(struct pt_regs *regs, struct rtas_error_log *errp)
* SLB multihit is done by now.
*/
out:
- mtmsr(mfmsr() | MSR_IR | MSR_DR);
+ msr = mfmsr();
+ mtmsr(msr | MSR_IR | MSR_DR);
+
disposition = mce_handle_err_virtmode(regs, errp, mce_log,
disposition);
+
+ /*
+ * Queue irq work to log this rtas event later.
+ * irq_work_queue uses per-cpu variables, so do this in virt
+ * mode as well.
+ */
+ irq_work_queue(&mce_errlog_process_work);
+
+ mtmsr(msr);
+
return disposition;
}
@@ -865,10 +878,8 @@ long pseries_machine_check_realmode(struct pt_regs *regs)
* virtual mode.
*/
disposition = mce_handle_error(regs, errp);
- fwnmi_release_errinfo();
- /* Queue irq work to log this rtas event later. */
- irq_work_queue(&mce_errlog_process_work);
+ fwnmi_release_errinfo();
if (disposition == RTAS_DISP_FULLY_RECOVERED)
return 1;
--
2.23.0
^ permalink raw reply related
* Re: [PATCH v7 28/42] powerpc: convert interrupt handlers to use wrappers
From: Nicholas Piggin @ 2021-02-07 12:56 UTC (permalink / raw)
To: Christophe Leroy, linuxppc-dev; +Cc: Athira Rajeev
In-Reply-To: <0e319d85-9fa0-ff97-03b2-93637ad89a99@csgroup.eu>
Excerpts from Christophe Leroy's message of February 5, 2021 6:09 pm:
>
>
> Le 30/01/2021 à 14:08, Nicholas Piggin a écrit :
>> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
>> ---
>
>> diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
>> index f70d3f6174c8..7ff915aae8ec 100644
>> --- a/arch/powerpc/kernel/traps.c
>> +++ b/arch/powerpc/kernel/traps.c
>
>> @@ -1462,7 +1474,7 @@ static int emulate_math(struct pt_regs *regs)
>> static inline int emulate_math(struct pt_regs *regs) { return -1; }
>> #endif
>>
>> -void program_check_exception(struct pt_regs *regs)
>> +DEFINE_INTERRUPT_HANDLER(program_check_exception)
>> {
>> enum ctx_state prev_state = exception_enter();
>> unsigned int reason = get_reason(regs);
>> @@ -1587,14 +1599,14 @@ NOKPROBE_SYMBOL(program_check_exception);
>> * This occurs when running in hypervisor mode on POWER6 or later
>> * and an illegal instruction is encountered.
>> */
>> -void emulation_assist_interrupt(struct pt_regs *regs)
>> +DEFINE_INTERRUPT_HANDLER(emulation_assist_interrupt)
>> {
>> regs->msr |= REASON_ILLEGAL;
>> program_check_exception(regs);
>
> Is it correct that an INTERRUPT_HANDLER calls another INTERRUPT_HANDLER ?
No, here is a patch for it, should go any time before the interrupt
wrappers are introduced. It causes some conflicts later but are not
too complex. I can resend the series if necessary.
Thanks,
Nick
---
powerpc/traps: factor common code from program check and emulation assist
Move the program check handling into a function called by both, rather
than have the emulation assist handler call the program check handler.
This allows each of these handlers to be implemented with "interrupt
wrappers" in a later change.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/kernel/traps.c | 38 +++++++++++++++++++++++--------------
1 file changed, 24 insertions(+), 14 deletions(-)
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index f70d3f6174c8..2c5986109412 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -1462,9 +1462,8 @@ static int emulate_math(struct pt_regs *regs)
static inline int emulate_math(struct pt_regs *regs) { return -1; }
#endif
-void program_check_exception(struct pt_regs *regs)
+static void do_program_check(struct pt_regs *regs)
{
- enum ctx_state prev_state = exception_enter();
unsigned int reason = get_reason(regs);
/* We can now get here via a FP Unavailable exception if the core
@@ -1473,22 +1472,22 @@ void program_check_exception(struct pt_regs *regs)
if (reason & REASON_FP) {
/* IEEE FP exception */
parse_fpe(regs);
- goto bail;
+ return;
}
if (reason & REASON_TRAP) {
unsigned long bugaddr;
/* Debugger is first in line to stop recursive faults in
* rcu_lock, notify_die, or atomic_notifier_call_chain */
if (debugger_bpt(regs))
- goto bail;
+ return;
if (kprobe_handler(regs))
- goto bail;
+ return;
/* trap exception */
if (notify_die(DIE_BPT, "breakpoint", regs, 5, 5, SIGTRAP)
== NOTIFY_STOP)
- goto bail;
+ return;
bugaddr = regs->nip;
/*
@@ -1500,10 +1499,10 @@ void program_check_exception(struct pt_regs *regs)
if (!(regs->msr & MSR_PR) && /* not user-mode */
report_bug(bugaddr, regs) == BUG_TRAP_TYPE_WARN) {
regs->nip += 4;
- goto bail;
+ return;
}
_exception(SIGTRAP, regs, TRAP_BRKPT, regs->nip);
- goto bail;
+ return;
}
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
if (reason & REASON_TM) {
@@ -1524,7 +1523,7 @@ void program_check_exception(struct pt_regs *regs)
*/
if (user_mode(regs)) {
_exception(SIGILL, regs, ILL_ILLOPN, regs->nip);
- goto bail;
+ return;
} else {
printk(KERN_EMERG "Unexpected TM Bad Thing exception "
"at %lx (msr 0x%lx) tm_scratch=%llx\n",
@@ -1557,7 +1556,7 @@ void program_check_exception(struct pt_regs *regs)
* pattern to occurrences etc. -dgibson 31/Mar/2003
*/
if (!emulate_math(regs))
- goto bail;
+ return;
/* Try to emulate it if we should. */
if (reason & (REASON_ILLEGAL | REASON_PRIVILEGED)) {
@@ -1565,10 +1564,10 @@ void program_check_exception(struct pt_regs *regs)
case 0:
regs->nip += 4;
emulate_single_step(regs);
- goto bail;
+ return;
case -EFAULT:
_exception(SIGSEGV, regs, SEGV_MAPERR, regs->nip);
- goto bail;
+ return;
}
}
@@ -1578,7 +1577,14 @@ void program_check_exception(struct pt_regs *regs)
else
_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
-bail:
+}
+
+void program_check_exception(struct pt_regs *regs)
+{
+ enum ctx_state prev_state = exception_enter();
+
+ do_program_check(regs);
+
exception_exit(prev_state);
}
NOKPROBE_SYMBOL(program_check_exception);
@@ -1589,8 +1595,12 @@ NOKPROBE_SYMBOL(program_check_exception);
*/
void emulation_assist_interrupt(struct pt_regs *regs)
{
+ enum ctx_state prev_state = exception_enter();
+
regs->msr |= REASON_ILLEGAL;
- program_check_exception(regs);
+ do_program_check(regs);
+
+ exception_exit(prev_state);
}
NOKPROBE_SYMBOL(emulation_assist_interrupt);
--
2.23.0
^ permalink raw reply related
* Re: [PATCH v7 42/42] powerpc/64s: power4 nap fixup in C
From: Nicholas Piggin @ 2021-02-07 12:58 UTC (permalink / raw)
To: linuxppc-dev, Michael Ellerman; +Cc: Athira Rajeev
In-Reply-To: <878s86dals.fsf@mpe.ellerman.id.au>
Excerpts from Michael Ellerman's message of February 2, 2021 8:31 pm:
> Nicholas Piggin <npiggin@gmail.com> writes:
>> There is no need for this to be in asm, use the new intrrupt entry wrapper.
>>
>> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
>> ---
>> arch/powerpc/include/asm/interrupt.h | 15 +++++++++
>> arch/powerpc/include/asm/processor.h | 1 +
>> arch/powerpc/include/asm/thread_info.h | 6 ++++
>> arch/powerpc/kernel/exceptions-64s.S | 45 --------------------------
>> arch/powerpc/kernel/idle_book3s.S | 4 +++
>> 5 files changed, 26 insertions(+), 45 deletions(-)
>
> Something in here is making my G5 not boot.
>
> I don't know what the problem is because that machine is in the office,
> and I am not, and it has no serial console.
>
> I tried turning on pstore but it doesn't record anything :/
Here is an incremental patch (hopefully) should fix it. Should be
folded with this one.
Thanks,
Nick
---
powerpc/64s: nap_adjust_return fix
This is a fix for patch "powerpc/64s: power4 nap fixup in C".
Non-maskable interrupts should not create any exit work, so there
should be no reason to come out of idle. So take the nap fixup out
of NMIs.
The problem with having them here is that an interrupt can come in
and then get interrupted by an NMI, the NMI will then set its return
to the idle wakeup and never complete the regular interrupt handling.
Before the "powerpc/64s: power4 nap fixup in C" patch, this wouldn't
occur because the true NMIs didn't call FIXUP_NAP, and the other
interrupts would call it before running their handler, so they would
not have a chance to call may_hard_irq_enable and allow soft-NMIs
(watchdog, perf) to come through.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/include/asm/interrupt.h | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/include/asm/interrupt.h b/arch/powerpc/include/asm/interrupt.h
index 25f2420b1965..afdf4aba2e6b 100644
--- a/arch/powerpc/include/asm/interrupt.h
+++ b/arch/powerpc/include/asm/interrupt.h
@@ -12,6 +12,7 @@ static inline void nap_adjust_return(struct pt_regs *regs)
{
#ifdef CONFIG_PPC_970_NAP
if (unlikely(test_thread_local_flags(_TLF_NAPPING))) {
+ /* Can avoid a test-and-clear because NMIs do not call this */
clear_thread_local_flags(_TLF_NAPPING);
regs->nip = (unsigned long)power4_idle_nap_return;
}
@@ -164,7 +165,10 @@ static inline void interrupt_nmi_exit_prepare(struct pt_regs *regs, struct inter
radix_enabled() || (mfmsr() & MSR_DR))
nmi_exit();
- nap_adjust_return(regs);
+ /*
+ * nmi does not call nap_adjust_return because nmi should not create
+ * new work to do (must use irq_work for that).
+ */
#ifdef CONFIG_PPC64
if (TRAP(regs) != 0x900 && TRAP(regs) != 0xf00 && TRAP(regs) != 0x260)
--
2.23.0
^ permalink raw reply related
* Re: [PATCH RFC v1 5/6] xen-swiotlb: convert variables to arrays
From: Christoph Hellwig @ 2021-02-07 15:56 UTC (permalink / raw)
To: Dongli Zhang
Cc: ulf.hansson, airlied, joonas.lahtinen, dri-devel, linux-kernel,
bhelgaas, paulus, hpa, hch, m.szyprowski, sstabellini,
adrian.hunter, x86, joe.jin, mingo, peterz, mingo, bskeggs,
linux-pci, xen-devel, matthew.auld, thomas.lendacky, konrad.wilk,
intel-gfx, jani.nikula, bp, rodrigo.vivi, nouveau,
boris.ostrovsky, chris, jgross, tsbogend, robin.murphy, linux-mmc,
linux-mips, iommu, tglx, bauerman, daniel, akpm, linuxppc-dev,
rppt
In-Reply-To: <20210204084023.GA32328@lst.de>
On Thu, Feb 04, 2021 at 09:40:23AM +0100, Christoph Hellwig wrote:
> So one thing that has been on my mind for a while: I'd really like
> to kill the separate dma ops in Xen swiotlb. If we compare xen-swiotlb
> to swiotlb the main difference seems to be:
>
> - additional reasons to bounce I/O vs the plain DMA capable
> - the possibility to do a hypercall on arm/arm64
> - an extra translation layer before doing the phys_to_dma and vice
> versa
> - an special memory allocator
>
> I wonder if inbetween a few jump labels or other no overhead enablement
> options and possibly better use of the dma_range_map we could kill
> off most of swiotlb-xen instead of maintaining all this code duplication?
So I looked at this a bit more.
For x86 with XENFEAT_auto_translated_physmap (how common is that?)
pfn_to_gfn is a nop, so plain phys_to_dma/dma_to_phys do work as-is.
xen_arch_need_swiotlb always returns true for x86, and
range_straddles_page_boundary should never be true for the
XENFEAT_auto_translated_physmap case.
So as far as I can tell the mapping fast path for the
XENFEAT_auto_translated_physmap can be trivially reused from swiotlb.
That leaves us with the next more complicated case, x86 or fully cache
coherent arm{,64} without XENFEAT_auto_translated_physmap. In that case
we need to patch in a phys_to_dma/dma_to_phys that performs the MFN
lookup, which could be done using alternatives or jump labels.
I think if that is done right we should also be able to let that cover
the foreign pages in is_xen_swiotlb_buffer/is_swiotlb_buffer, but
in that worst case that would need another alternative / jump label.
For non-coherent arm{,64} we'd also need to use alternatives or jump
labels to for the cache maintainance ops, but that isn't a hard problem
either.
^ permalink raw reply
* [PATCH 5/8] xen-swiotlb: remove xen_io_tlb_start and xen_io_tlb_nslabs
From: Christoph Hellwig @ 2021-02-07 16:09 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk
Cc: iommu, xen-devel, Claire Chang, linuxppc-dev, Dongli Zhang
In-Reply-To: <20210207160934.2955931-1-hch@lst.de>
The xen_io_tlb_start and xen_io_tlb_nslabs variables ar now only used in
xen_swiotlb_init, so replace them with local variables.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/xen/swiotlb-xen.c | 57 +++++++++++++++++----------------------
1 file changed, 25 insertions(+), 32 deletions(-)
diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c
index 57f8d5fadc1fcd..6e0f2c5ecd1a2f 100644
--- a/drivers/xen/swiotlb-xen.c
+++ b/drivers/xen/swiotlb-xen.c
@@ -40,14 +40,7 @@
#include <trace/events/swiotlb.h>
#define MAX_DMA_BITS 32
-/*
- * Used to do a quick range check in swiotlb_tbl_unmap_single and
- * swiotlb_tbl_sync_single_*, to see if the memory was in fact allocated by this
- * API.
- */
-static char *xen_io_tlb_start;
-static unsigned long xen_io_tlb_nslabs;
/*
* Quick lookup value of the bus address of the IOTLB.
*/
@@ -169,75 +162,75 @@ int __ref xen_swiotlb_init(int verbose, bool early)
int rc = -ENOMEM;
enum xen_swiotlb_err m_ret = XEN_SWIOTLB_UNKNOWN;
unsigned int repeat = 3;
+ char *start;
+ unsigned long nslabs;
- xen_io_tlb_nslabs = swiotlb_nr_tbl();
+ nslabs = swiotlb_nr_tbl();
retry:
- if (!xen_io_tlb_nslabs)
- xen_io_tlb_nslabs = DEFAULT_NSLABS;
- bytes = xen_io_tlb_nslabs << IO_TLB_SHIFT;
+ if (!nslabs)
+ nslabs = DEFAULT_NSLABS;
+ bytes = nslabs << IO_TLB_SHIFT;
order = get_order(bytes);
/*
* IO TLB memory already allocated. Just use it.
*/
- if (io_tlb_start != 0) {
- xen_io_tlb_start = phys_to_virt(io_tlb_start);
+ if (io_tlb_start != 0)
goto end;
- }
/*
* Get IO TLB memory from any location.
*/
if (early) {
- xen_io_tlb_start = memblock_alloc(PAGE_ALIGN(bytes),
+ start = memblock_alloc(PAGE_ALIGN(bytes),
PAGE_SIZE);
- if (!xen_io_tlb_start)
+ if (!start)
panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
__func__, PAGE_ALIGN(bytes), PAGE_SIZE);
} else {
#define SLABS_PER_PAGE (1 << (PAGE_SHIFT - IO_TLB_SHIFT))
#define IO_TLB_MIN_SLABS ((1<<20) >> IO_TLB_SHIFT)
while ((SLABS_PER_PAGE << order) > IO_TLB_MIN_SLABS) {
- xen_io_tlb_start = (void *)xen_get_swiotlb_free_pages(order);
- if (xen_io_tlb_start)
+ start = (void *)xen_get_swiotlb_free_pages(order);
+ if (start)
break;
order--;
}
if (order != get_order(bytes)) {
pr_warn("Warning: only able to allocate %ld MB for software IO TLB\n",
(PAGE_SIZE << order) >> 20);
- xen_io_tlb_nslabs = SLABS_PER_PAGE << order;
- bytes = xen_io_tlb_nslabs << IO_TLB_SHIFT;
+ nslabs = SLABS_PER_PAGE << order;
+ bytes = nslabs << IO_TLB_SHIFT;
}
}
- if (!xen_io_tlb_start) {
+ if (!start) {
m_ret = XEN_SWIOTLB_ENOMEM;
goto error;
}
/*
* And replace that memory with pages under 4GB.
*/
- rc = xen_swiotlb_fixup(xen_io_tlb_start,
+ rc = xen_swiotlb_fixup(start,
bytes,
- xen_io_tlb_nslabs);
+ nslabs);
if (rc) {
if (early)
- memblock_free(__pa(xen_io_tlb_start),
+ memblock_free(__pa(start),
PAGE_ALIGN(bytes));
else {
- free_pages((unsigned long)xen_io_tlb_start, order);
- xen_io_tlb_start = NULL;
+ free_pages((unsigned long)start, order);
+ start = NULL;
}
m_ret = XEN_SWIOTLB_EFIXUP;
goto error;
}
if (early) {
- if (swiotlb_init_with_tbl(xen_io_tlb_start, xen_io_tlb_nslabs,
+ if (swiotlb_init_with_tbl(start, nslabs,
verbose))
panic("Cannot allocate SWIOTLB buffer");
rc = 0;
} else
- rc = swiotlb_late_init_with_tbl(xen_io_tlb_start, xen_io_tlb_nslabs);
+ rc = swiotlb_late_init_with_tbl(start, nslabs);
end:
if (!rc)
@@ -246,17 +239,17 @@ int __ref xen_swiotlb_init(int verbose, bool early)
return rc;
error:
if (repeat--) {
- xen_io_tlb_nslabs = max(1024UL, /* Min is 2MB */
- (xen_io_tlb_nslabs >> 1));
+ nslabs = max(1024UL, /* Min is 2MB */
+ (nslabs >> 1));
pr_info("Lowering to %luMB\n",
- (xen_io_tlb_nslabs << IO_TLB_SHIFT) >> 20);
+ (nslabs << IO_TLB_SHIFT) >> 20);
goto retry;
}
pr_err("%s (rc:%d)\n", xen_swiotlb_error(m_ret), rc);
if (early)
panic("%s (rc:%d)", xen_swiotlb_error(m_ret), rc);
else
- free_pages((unsigned long)xen_io_tlb_start, order);
+ free_pages((unsigned long)start, order);
return rc;
}
--
2.29.2
^ permalink raw reply related
* swiotlb cleanups
From: Christoph Hellwig @ 2021-02-07 16:09 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk
Cc: iommu, xen-devel, Claire Chang, linuxppc-dev, Dongli Zhang
Hi Konrad,
this series contains a bunch of swiotlb cleanups, mostly to reduce the
amount of internals exposed to code outside of swiotlb.c, which should
helper to prepare for supporting multiple different bounce buffer pools.
^ permalink raw reply
* [PATCH 4/8] xen-swiotlb: remove xen_set_nslabs
From: Christoph Hellwig @ 2021-02-07 16:09 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk
Cc: iommu, xen-devel, Claire Chang, linuxppc-dev, Dongli Zhang
In-Reply-To: <20210207160934.2955931-1-hch@lst.de>
The xen_set_nslabs function is a little weird, as it has just one
caller, that caller passes a global variable as the argument,
which is then overriden in the function and a derivative of it
returned. Just add a cpp symbol for the default size using a readable
constant and open code the remaining three lines in the caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/xen/swiotlb-xen.c | 19 +++++++------------
1 file changed, 7 insertions(+), 12 deletions(-)
diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c
index 4298f74a083985..57f8d5fadc1fcd 100644
--- a/drivers/xen/swiotlb-xen.c
+++ b/drivers/xen/swiotlb-xen.c
@@ -138,16 +138,6 @@ xen_swiotlb_fixup(void *buf, size_t size, unsigned long nslabs)
} while (i < nslabs);
return 0;
}
-static unsigned long xen_set_nslabs(unsigned long nr_tbl)
-{
- if (!nr_tbl) {
- xen_io_tlb_nslabs = (64 * 1024 * 1024 >> IO_TLB_SHIFT);
- xen_io_tlb_nslabs = ALIGN(xen_io_tlb_nslabs, IO_TLB_SEGSIZE);
- } else
- xen_io_tlb_nslabs = nr_tbl;
-
- return xen_io_tlb_nslabs << IO_TLB_SHIFT;
-}
enum xen_swiotlb_err {
XEN_SWIOTLB_UNKNOWN = 0,
@@ -170,6 +160,9 @@ static const char *xen_swiotlb_error(enum xen_swiotlb_err err)
}
return "";
}
+
+#define DEFAULT_NSLABS ALIGN(SZ_64M >> IO_TLB_SHIFT, IO_TLB_SEGSIZE)
+
int __ref xen_swiotlb_init(int verbose, bool early)
{
unsigned long bytes, order;
@@ -179,8 +172,10 @@ int __ref xen_swiotlb_init(int verbose, bool early)
xen_io_tlb_nslabs = swiotlb_nr_tbl();
retry:
- bytes = xen_set_nslabs(xen_io_tlb_nslabs);
- order = get_order(xen_io_tlb_nslabs << IO_TLB_SHIFT);
+ if (!xen_io_tlb_nslabs)
+ xen_io_tlb_nslabs = DEFAULT_NSLABS;
+ bytes = xen_io_tlb_nslabs << IO_TLB_SHIFT;
+ order = get_order(bytes);
/*
* IO TLB memory already allocated. Just use it.
--
2.29.2
^ permalink raw reply related
* [PATCH 1/8] powerpc/svm: stop using io_tlb_start
From: Christoph Hellwig @ 2021-02-07 16:09 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk
Cc: iommu, xen-devel, Claire Chang, linuxppc-dev, Dongli Zhang
In-Reply-To: <20210207160934.2955931-1-hch@lst.de>
Use the local variable that is passed to swiotlb_init_with_tbl for
freeing the memory in the failure case to isolate the code a little
better from swiotlb internals.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
arch/powerpc/platforms/pseries/svm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/platforms/pseries/svm.c b/arch/powerpc/platforms/pseries/svm.c
index 7b739cc7a8a93e..b9968ac7cc0789 100644
--- a/arch/powerpc/platforms/pseries/svm.c
+++ b/arch/powerpc/platforms/pseries/svm.c
@@ -56,7 +56,7 @@ void __init svm_swiotlb_init(void)
return;
if (io_tlb_start)
- memblock_free_early(io_tlb_start,
+ memblock_free_early(__pa(vstart),
PAGE_ALIGN(io_tlb_nslabs << IO_TLB_SHIFT));
panic("SVM: Cannot allocate SWIOTLB buffer");
}
--
2.29.2
^ permalink raw reply related
* [PATCH 3/8] xen-swiotlb: use io_tlb_end in xen_swiotlb_dma_supported
From: Christoph Hellwig @ 2021-02-07 16:09 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk
Cc: iommu, xen-devel, Claire Chang, linuxppc-dev, Dongli Zhang
In-Reply-To: <20210207160934.2955931-1-hch@lst.de>
Use the existing variable that holds the physical address for
xen_io_tlb_end to simplify xen_swiotlb_dma_supported a bit, and remove
the otherwise unused xen_io_tlb_end variable and the xen_virt_to_bus
helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/xen/swiotlb-xen.c | 10 ++--------
1 file changed, 2 insertions(+), 8 deletions(-)
diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c
index a4026822a889f7..4298f74a083985 100644
--- a/drivers/xen/swiotlb-xen.c
+++ b/drivers/xen/swiotlb-xen.c
@@ -46,7 +46,7 @@
* API.
*/
-static char *xen_io_tlb_start, *xen_io_tlb_end;
+static char *xen_io_tlb_start;
static unsigned long xen_io_tlb_nslabs;
/*
* Quick lookup value of the bus address of the IOTLB.
@@ -82,11 +82,6 @@ static inline phys_addr_t xen_dma_to_phys(struct device *dev,
return xen_bus_to_phys(dev, dma_to_phys(dev, dma_addr));
}
-static inline dma_addr_t xen_virt_to_bus(struct device *dev, void *address)
-{
- return xen_phys_to_dma(dev, virt_to_phys(address));
-}
-
static inline int range_straddles_page_boundary(phys_addr_t p, size_t size)
{
unsigned long next_bfn, xen_pfn = XEN_PFN_DOWN(p);
@@ -250,7 +245,6 @@ int __ref xen_swiotlb_init(int verbose, bool early)
rc = swiotlb_late_init_with_tbl(xen_io_tlb_start, xen_io_tlb_nslabs);
end:
- xen_io_tlb_end = xen_io_tlb_start + bytes;
if (!rc)
swiotlb_set_max_segment(PAGE_SIZE);
@@ -558,7 +552,7 @@ xen_swiotlb_sync_sg_for_device(struct device *dev, struct scatterlist *sgl,
static int
xen_swiotlb_dma_supported(struct device *hwdev, u64 mask)
{
- return xen_virt_to_bus(hwdev, xen_io_tlb_end - 1) <= mask;
+ return xen_phys_to_dma(hwdev, io_tlb_end - 1) <= mask;
}
const struct dma_map_ops xen_swiotlb_dma_ops = {
--
2.29.2
^ permalink raw reply related
* [PATCH 6/8] swiotlb: lift the double initialization protection from xen-swiotlb
From: Christoph Hellwig @ 2021-02-07 16:09 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk
Cc: iommu, xen-devel, Claire Chang, linuxppc-dev, Dongli Zhang
In-Reply-To: <20210207160934.2955931-1-hch@lst.de>
Lift the double initialization protection from xen-swiotlb to the core
code to avoid exposing too many swiotlb internals. Also upgrade the
check to a warning as it should not happen.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/xen/swiotlb-xen.c | 7 -------
kernel/dma/swiotlb.c | 8 ++++++++
2 files changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c
index 6e0f2c5ecd1a2f..e6c8556e879ee6 100644
--- a/drivers/xen/swiotlb-xen.c
+++ b/drivers/xen/swiotlb-xen.c
@@ -172,12 +172,6 @@ int __ref xen_swiotlb_init(int verbose, bool early)
bytes = nslabs << IO_TLB_SHIFT;
order = get_order(bytes);
- /*
- * IO TLB memory already allocated. Just use it.
- */
- if (io_tlb_start != 0)
- goto end;
-
/*
* Get IO TLB memory from any location.
*/
@@ -232,7 +226,6 @@ int __ref xen_swiotlb_init(int verbose, bool early)
} else
rc = swiotlb_late_init_with_tbl(start, nslabs);
-end:
if (!rc)
swiotlb_set_max_segment(PAGE_SIZE);
diff --git a/kernel/dma/swiotlb.c b/kernel/dma/swiotlb.c
index adcc3c87e10078..a3737961ae5769 100644
--- a/kernel/dma/swiotlb.c
+++ b/kernel/dma/swiotlb.c
@@ -224,6 +224,10 @@ int __init swiotlb_init_with_tbl(char *tlb, unsigned long nslabs, int verbose)
unsigned long i, bytes;
size_t alloc_size;
+ /* protect against double initialization */
+ if (WARN_ON_ONCE(io_tlb_start))
+ return -ENOMEM;
+
bytes = nslabs << IO_TLB_SHIFT;
io_tlb_nslabs = nslabs;
@@ -355,6 +359,10 @@ swiotlb_late_init_with_tbl(char *tlb, unsigned long nslabs)
{
unsigned long i, bytes;
+ /* protect against double initialization */
+ if (WARN_ON_ONCE(io_tlb_start))
+ return -ENOMEM;
+
bytes = nslabs << IO_TLB_SHIFT;
io_tlb_nslabs = nslabs;
--
2.29.2
^ permalink raw reply related
* [PATCH 2/8] xen-swiotlb: use is_swiotlb_buffer in is_xen_swiotlb_buffer
From: Christoph Hellwig @ 2021-02-07 16:09 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk
Cc: iommu, xen-devel, Claire Chang, linuxppc-dev, Dongli Zhang
In-Reply-To: <20210207160934.2955931-1-hch@lst.de>
Use the is_swiotlb_buffer to check if a physical address is
a swiotlb buffer. This works because xen-swiotlb does use the
same buffer as the main swiotlb code, and xen_io_tlb_{start,end}
are just the addresses for it that went through phys_to_virt.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/xen/swiotlb-xen.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c
index 2b385c1b4a99cb..a4026822a889f7 100644
--- a/drivers/xen/swiotlb-xen.c
+++ b/drivers/xen/swiotlb-xen.c
@@ -111,10 +111,8 @@ static int is_xen_swiotlb_buffer(struct device *dev, dma_addr_t dma_addr)
* have the same virtual address as another address
* in our domain. Therefore _only_ check address within our domain.
*/
- if (pfn_valid(PFN_DOWN(paddr))) {
- return paddr >= virt_to_phys(xen_io_tlb_start) &&
- paddr < virt_to_phys(xen_io_tlb_end);
- }
+ if (pfn_valid(PFN_DOWN(paddr)))
+ return is_swiotlb_buffer(paddr);
return 0;
}
--
2.29.2
^ permalink raw reply related
* [PATCH 7/8] xen-swiotlb: split xen_swiotlb_init
From: Christoph Hellwig @ 2021-02-07 16:09 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk
Cc: iommu, xen-devel, Claire Chang, linuxppc-dev, Dongli Zhang
In-Reply-To: <20210207160934.2955931-1-hch@lst.de>
Split xen_swiotlb_init into a normal an an early case. That makes both
much simpler and more readable, and also allows marking the early
code as __init and x86-only.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
arch/arm/xen/mm.c | 2 +-
arch/x86/xen/pci-swiotlb-xen.c | 4 +-
drivers/xen/swiotlb-xen.c | 124 +++++++++++++++++++--------------
include/xen/swiotlb-xen.h | 3 +-
4 files changed, 75 insertions(+), 58 deletions(-)
diff --git a/arch/arm/xen/mm.c b/arch/arm/xen/mm.c
index 467fa225c3d0ed..aae950cd053fea 100644
--- a/arch/arm/xen/mm.c
+++ b/arch/arm/xen/mm.c
@@ -140,7 +140,7 @@ static int __init xen_mm_init(void)
struct gnttab_cache_flush cflush;
if (!xen_initial_domain())
return 0;
- xen_swiotlb_init(1, false);
+ xen_swiotlb_init();
cflush.op = 0;
cflush.a.dev_bus_addr = 0;
diff --git a/arch/x86/xen/pci-swiotlb-xen.c b/arch/x86/xen/pci-swiotlb-xen.c
index 19ae3e4fe4e98e..54f9aa7e845739 100644
--- a/arch/x86/xen/pci-swiotlb-xen.c
+++ b/arch/x86/xen/pci-swiotlb-xen.c
@@ -59,7 +59,7 @@ int __init pci_xen_swiotlb_detect(void)
void __init pci_xen_swiotlb_init(void)
{
if (xen_swiotlb) {
- xen_swiotlb_init(1, true /* early */);
+ xen_swiotlb_init_early();
dma_ops = &xen_swiotlb_dma_ops;
#ifdef CONFIG_PCI
@@ -76,7 +76,7 @@ int pci_xen_swiotlb_init_late(void)
if (xen_swiotlb)
return 0;
- rc = xen_swiotlb_init(1, false /* late */);
+ rc = xen_swiotlb_init();
if (rc)
return rc;
diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c
index e6c8556e879ee6..b2d9e77059bf5a 100644
--- a/drivers/xen/swiotlb-xen.c
+++ b/drivers/xen/swiotlb-xen.c
@@ -156,96 +156,112 @@ static const char *xen_swiotlb_error(enum xen_swiotlb_err err)
#define DEFAULT_NSLABS ALIGN(SZ_64M >> IO_TLB_SHIFT, IO_TLB_SEGSIZE)
-int __ref xen_swiotlb_init(int verbose, bool early)
+int __ref xen_swiotlb_init(void)
{
- unsigned long bytes, order;
- int rc = -ENOMEM;
enum xen_swiotlb_err m_ret = XEN_SWIOTLB_UNKNOWN;
+ unsigned long nslabs, bytes, order;
unsigned int repeat = 3;
+ int rc = -ENOMEM;
char *start;
- unsigned long nslabs;
nslabs = swiotlb_nr_tbl();
-retry:
if (!nslabs)
nslabs = DEFAULT_NSLABS;
+retry:
+ m_ret = XEN_SWIOTLB_ENOMEM;
bytes = nslabs << IO_TLB_SHIFT;
order = get_order(bytes);
/*
* Get IO TLB memory from any location.
*/
- if (early) {
- start = memblock_alloc(PAGE_ALIGN(bytes),
- PAGE_SIZE);
- if (!start)
- panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
- __func__, PAGE_ALIGN(bytes), PAGE_SIZE);
- } else {
#define SLABS_PER_PAGE (1 << (PAGE_SHIFT - IO_TLB_SHIFT))
#define IO_TLB_MIN_SLABS ((1<<20) >> IO_TLB_SHIFT)
- while ((SLABS_PER_PAGE << order) > IO_TLB_MIN_SLABS) {
- start = (void *)xen_get_swiotlb_free_pages(order);
- if (start)
- break;
- order--;
- }
- if (order != get_order(bytes)) {
- pr_warn("Warning: only able to allocate %ld MB for software IO TLB\n",
- (PAGE_SIZE << order) >> 20);
- nslabs = SLABS_PER_PAGE << order;
- bytes = nslabs << IO_TLB_SHIFT;
- }
+ while ((SLABS_PER_PAGE << order) > IO_TLB_MIN_SLABS) {
+ start = (void *)xen_get_swiotlb_free_pages(order);
+ if (start)
+ break;
+ order--;
}
- if (!start) {
- m_ret = XEN_SWIOTLB_ENOMEM;
+ if (!start)
goto error;
+ if (order != get_order(bytes)) {
+ pr_warn("Warning: only able to allocate %ld MB for software IO TLB\n",
+ (PAGE_SIZE << order) >> 20);
+ nslabs = SLABS_PER_PAGE << order;
+ bytes = nslabs << IO_TLB_SHIFT;
}
+
/*
* And replace that memory with pages under 4GB.
*/
- rc = xen_swiotlb_fixup(start,
- bytes,
- nslabs);
+ rc = xen_swiotlb_fixup(start, bytes, nslabs);
if (rc) {
- if (early)
- memblock_free(__pa(start),
- PAGE_ALIGN(bytes));
- else {
- free_pages((unsigned long)start, order);
- start = NULL;
- }
+ free_pages((unsigned long)start, order);
m_ret = XEN_SWIOTLB_EFIXUP;
goto error;
}
- if (early) {
- if (swiotlb_init_with_tbl(start, nslabs,
- verbose))
- panic("Cannot allocate SWIOTLB buffer");
- rc = 0;
- } else
- rc = swiotlb_late_init_with_tbl(start, nslabs);
-
- if (!rc)
- swiotlb_set_max_segment(PAGE_SIZE);
-
- return rc;
+ rc = swiotlb_late_init_with_tbl(start, nslabs);
+ if (rc)
+ return rc;
+ swiotlb_set_max_segment(PAGE_SIZE);
+ return 0;
error:
if (repeat--) {
- nslabs = max(1024UL, /* Min is 2MB */
- (nslabs >> 1));
+ /* Min is 2MB */
+ nslabs = max(1024UL, (nslabs >> 1));
pr_info("Lowering to %luMB\n",
(nslabs << IO_TLB_SHIFT) >> 20);
goto retry;
}
pr_err("%s (rc:%d)\n", xen_swiotlb_error(m_ret), rc);
- if (early)
- panic("%s (rc:%d)", xen_swiotlb_error(m_ret), rc);
- else
- free_pages((unsigned long)start, order);
+ free_pages((unsigned long)start, order);
return rc;
}
+#ifdef CONFIG_X86
+void __init xen_swiotlb_init_early(void)
+{
+ unsigned long nslabs, bytes;
+ unsigned int repeat = 3;
+ char *start;
+ int rc;
+
+ nslabs = swiotlb_nr_tbl();
+ if (!nslabs)
+ nslabs = DEFAULT_NSLABS;
+retry:
+ /*
+ * Get IO TLB memory from any location.
+ */
+ bytes = nslabs << IO_TLB_SHIFT;
+ start = memblock_alloc(PAGE_ALIGN(bytes), PAGE_SIZE);
+ if (!start)
+ panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
+ __func__, PAGE_ALIGN(bytes), PAGE_SIZE);
+
+ /*
+ * And replace that memory with pages under 4GB.
+ */
+ rc = xen_swiotlb_fixup(start, bytes, nslabs);
+ if (rc) {
+ memblock_free(__pa(start), PAGE_ALIGN(bytes));
+ if (repeat--) {
+ /* Min is 2MB */
+ nslabs = max(1024UL, (nslabs >> 1));
+ pr_info("Lowering to %luMB\n",
+ (nslabs << IO_TLB_SHIFT) >> 20);
+ goto retry;
+ }
+ panic("%s (rc:%d)", xen_swiotlb_error(XEN_SWIOTLB_EFIXUP), rc);
+ }
+
+ if (swiotlb_init_with_tbl(start, nslabs, false))
+ panic("Cannot allocate SWIOTLB buffer");
+ swiotlb_set_max_segment(PAGE_SIZE);
+}
+#endif /* CONFIG_X86 */
+
static void *
xen_swiotlb_alloc_coherent(struct device *hwdev, size_t size,
dma_addr_t *dma_handle, gfp_t flags,
diff --git a/include/xen/swiotlb-xen.h b/include/xen/swiotlb-xen.h
index d5eaf9d682b804..6206b1ec99168a 100644
--- a/include/xen/swiotlb-xen.h
+++ b/include/xen/swiotlb-xen.h
@@ -9,7 +9,8 @@ void xen_dma_sync_for_cpu(struct device *dev, dma_addr_t handle,
void xen_dma_sync_for_device(struct device *dev, dma_addr_t handle,
size_t size, enum dma_data_direction dir);
-extern int xen_swiotlb_init(int verbose, bool early);
+int xen_swiotlb_init(void);
+void __init xen_swiotlb_init_early(void);
extern const struct dma_map_ops xen_swiotlb_dma_ops;
#endif /* __LINUX_SWIOTLB_XEN_H */
--
2.29.2
^ permalink raw reply related
* [PATCH 8/8] xen-swiotlb: remove the unused size argument from xen_swiotlb_fixup
From: Christoph Hellwig @ 2021-02-07 16:09 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk
Cc: iommu, xen-devel, Claire Chang, linuxppc-dev, Dongli Zhang
In-Reply-To: <20210207160934.2955931-1-hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/xen/swiotlb-xen.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c
index b2d9e77059bf5a..621a20c1143597 100644
--- a/drivers/xen/swiotlb-xen.c
+++ b/drivers/xen/swiotlb-xen.c
@@ -104,8 +104,7 @@ static int is_xen_swiotlb_buffer(struct device *dev, dma_addr_t dma_addr)
return 0;
}
-static int
-xen_swiotlb_fixup(void *buf, size_t size, unsigned long nslabs)
+static int xen_swiotlb_fixup(void *buf, unsigned long nslabs)
{
int i, rc;
int dma_bits;
@@ -195,7 +194,7 @@ int __ref xen_swiotlb_init(void)
/*
* And replace that memory with pages under 4GB.
*/
- rc = xen_swiotlb_fixup(start, bytes, nslabs);
+ rc = xen_swiotlb_fixup(start, nslabs);
if (rc) {
free_pages((unsigned long)start, order);
m_ret = XEN_SWIOTLB_EFIXUP;
@@ -243,7 +242,7 @@ void __init xen_swiotlb_init_early(void)
/*
* And replace that memory with pages under 4GB.
*/
- rc = xen_swiotlb_fixup(start, bytes, nslabs);
+ rc = xen_swiotlb_fixup(start, nslabs);
if (rc) {
memblock_free(__pa(start), PAGE_ALIGN(bytes));
if (repeat--) {
--
2.29.2
^ permalink raw reply related
* Re: [PATCH] mm/memtest: Add ARCH_USE_MEMTEST
From: Anshuman Khandual @ 2021-02-08 3:04 UTC (permalink / raw)
To: Max Filippov
Cc: Chris Zankel, Thomas Bogendoerfer,
open list:TENSILICA XTENSA PORT (xtensa), linuxppc-dev, LKML,
Russell King, linux-mips, Linux Memory Management List,
Ingo Molnar, Paul Mackerras, Catalin Marinas, Thomas Gleixner,
Will Deacon, linux-arm-kernel
In-Reply-To: <CAMo8BfLXaycXgy-F=TaWzpEZZJKEhbZecxwvBVd6jTo0RJ8atQ@mail.gmail.com>
On 2/5/21 1:05 PM, Max Filippov wrote:
> On Thu, Feb 4, 2021 at 8:10 PM Anshuman Khandual
> <anshuman.khandual@arm.com> wrote:
>>
>> early_memtest() does not get called from all architectures. Hence enabling
>> CONFIG_MEMTEST and providing a valid memtest=[1..N] kernel command line
>> option might not trigger the memory pattern tests as would be expected in
>> normal circumstances. This situation is misleading.
>>
>> The change here prevents the above mentioned problem after introducing a
>> new config option ARCH_USE_MEMTEST that should be subscribed on platforms
>> that call early_memtest(), in order to enable the config CONFIG_MEMTEST.
>> Conversely CONFIG_MEMTEST cannot be enabled on platforms where it would
>> not be tested anyway.
>>
>> Cc: Russell King <linux@armlinux.org.uk>
>> Cc: Catalin Marinas <catalin.marinas@arm.com>
>> Cc: Will Deacon <will@kernel.org>
>> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
>> Cc: Michael Ellerman <mpe@ellerman.id.au>
>> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
>> Cc: Paul Mackerras <paulus@samba.org>
>> Cc: Thomas Gleixner <tglx@linutronix.de>
>> Cc: Ingo Molnar <mingo@redhat.com>
>> Cc: Chris Zankel <chris@zankel.net>
>> Cc: Max Filippov <jcmvbkbc@gmail.com>
>> Cc: linux-arm-kernel@lists.infradead.org
>> Cc: linux-mips@vger.kernel.org
>> Cc: linuxppc-dev@lists.ozlabs.org
>> Cc: linux-xtensa@linux-xtensa.org
>> Cc: linux-mm@kvack.org
>> Cc: linux-kernel@vger.kernel.org
>> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
>> ---
>> This patch applies on v5.11-rc6 and has been tested on arm64 platform. But
>> it has been just build tested on all other platforms.
>>
>> arch/arm/Kconfig | 1 +
>> arch/arm64/Kconfig | 1 +
>> arch/mips/Kconfig | 1 +
>> arch/powerpc/Kconfig | 1 +
>> arch/x86/Kconfig | 1 +
>> arch/xtensa/Kconfig | 1 +
>> lib/Kconfig.debug | 9 ++++++++-
>> 7 files changed, 14 insertions(+), 1 deletion(-)
>
> Anshuman, entries in arch/*/Konfig files are sorted in alphabetical order,
> please keep them that way.
Sure, will fix up and resend.
>
> Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
>
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox