Re: [PATCH RESEND v3 6/9] drm/mediatek: Add gamma support different bank_size for other SoC

[AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>]

Il 12/09/22 03:30, Jason-JH.Lin ha scritto:
> Add multiple bank support for mt8195.
> If bank size is 0 which means no bank support.
> 
> Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
> ---
>   drivers/gpu/drm/mediatek/mtk_disp_gamma.c | 45 +++++++++++++----------
>   1 file changed, 26 insertions(+), 19 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_gamma.c b/drivers/gpu/drm/mediatek/mtk_disp_gamma.c
> index be82d15a5204..45da2b6206c8 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_gamma.c
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_gamma.c
> @@ -21,6 +21,7 @@
>   #define GAMMA_LUT_EN					BIT(1)
>   #define GAMMA_DITHERING					BIT(2)
>   #define DISP_GAMMA_SIZE				0x0030
> +#define DISP_GAMMA_BANK				0x0100
>   #define DISP_GAMMA_LUT				0x0700
>   
>   #define LUT_10BIT_MASK				0x03ff
> @@ -33,6 +34,7 @@ struct mtk_disp_gamma_data {
>   	bool lut_diff;
>   	u16 lut_size;
>   	u8 lut_bits;
> +	u16 bank_size;
>   };
>   
>   /*
> @@ -75,9 +77,10 @@ void mtk_gamma_set_common(struct device *dev, void __iomem *regs, struct drm_crt
>   	struct mtk_disp_gamma *gamma = dev_get_drvdata(dev);
>   	bool lut_diff = false;
>   	u16 lut_size = LUT_SIZE_DEFAULT;
> +	u16 bank_size = lut_size;

Just use gamma->data->bank_size directly, as platform data is always present.

>   	u8 lut_bits = LUT_BITS_DEFAULT;
>   	u8 shift_bits;
> -	unsigned int i, reg;
> +	unsigned int i, j, reg, bank_num;
>   	struct drm_color_lut *lut;
>   	void __iomem *lut_base;
>   	u32 word, mask;
> @@ -87,8 +90,10 @@ void mtk_gamma_set_common(struct device *dev, void __iomem *regs, struct drm_crt
>   		lut_diff = gamma->data->lut_diff;
>   		lut_size = gamma->data->lut_size;
>   		lut_bits = gamma->data->lut_bits;
> +		bank_size = gamma->data->bank_size;

You shall set bank_size = 512 to MT8173 and MT8183, otherwise they break, as this
will set bank_size to 0.

>   	}
>   
> +	bank_num = lut_size / bank_size;
>   	shift_bits = LUT_INPUT_BITS - lut_bits;
>   	mask = GENMASK(lut_bits - 1, 0);
>   

Regards,
Angelo