From: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
To: Andy Isaacson <adi@vmware.com>
Cc: jmorris@namei.org, linux-kernel@vger.kernel.org,
tpmdd-devel@lists.sourceforge.net, adi@hexapodia.org,
dds@google.com, Mimi Zohar <zohar@linux.vnet.ibm.com>,
Shahbaz Khan <shaz.linux@gmail.com>,
seiji.munetoh@gmail.com
Subject: Re: [PATCH 1/6] tpm_tis: various cleanups
Date: Thu, 10 Sep 2009 16:56:15 -0300 [thread overview]
Message-ID: <1252612575.4837.109.camel@blackbox> (raw)
In-Reply-To: <1246410255-6839-2-git-send-email-adi@vmware.com>
Acked-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
On Tue, 2009-06-30 at 18:04 -0700, Andy Isaacson wrote:
> Avoid tabs in printk output.
> Use parentheses and ARRAY_SIZE() in macro definition.
>
> Signed-off-by: Andy Isaacson <adi@vmware.com>
> ---
> drivers/char/tpm/tpm_tis.c | 20 ++++++++++----------
> 1 files changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
> index 717af7a..1b84441 100644
> --- a/drivers/char/tpm/tpm_tis.c
> +++ b/drivers/char/tpm/tpm_tis.c
> @@ -474,23 +474,23 @@ static int tpm_tis_init(struct device *dev, resource_size_t start,
> dev_dbg(dev, "TPM interface capabilities (0x%x):\n",
> intfcaps);
> if (intfcaps & TPM_INTF_BURST_COUNT_STATIC)
> - dev_dbg(dev, "\tBurst Count Static\n");
> + dev_dbg(dev, " Burst Count Static\n");
> if (intfcaps & TPM_INTF_CMD_READY_INT)
> - dev_dbg(dev, "\tCommand Ready Int Support\n");
> + dev_dbg(dev, " Command Ready Int Support\n");
> if (intfcaps & TPM_INTF_INT_EDGE_FALLING)
> - dev_dbg(dev, "\tInterrupt Edge Falling\n");
> + dev_dbg(dev, " Interrupt Edge Falling\n");
> if (intfcaps & TPM_INTF_INT_EDGE_RISING)
> - dev_dbg(dev, "\tInterrupt Edge Rising\n");
> + dev_dbg(dev, " Interrupt Edge Rising\n");
> if (intfcaps & TPM_INTF_INT_LEVEL_LOW)
> - dev_dbg(dev, "\tInterrupt Level Low\n");
> + dev_dbg(dev, " Interrupt Level Low\n");
> if (intfcaps & TPM_INTF_INT_LEVEL_HIGH)
> - dev_dbg(dev, "\tInterrupt Level High\n");
> + dev_dbg(dev, " Interrupt Level High\n");
> if (intfcaps & TPM_INTF_LOCALITY_CHANGE_INT)
> - dev_dbg(dev, "\tLocality Change Int Support\n");
> + dev_dbg(dev, " Locality Change Int Support\n");
> if (intfcaps & TPM_INTF_STS_VALID_INT)
> - dev_dbg(dev, "\tSts Valid Int Support\n");
> + dev_dbg(dev, " Sts Valid Int Support\n");
> if (intfcaps & TPM_INTF_DATA_AVAIL_INT)
> - dev_dbg(dev, "\tData Avail Int Support\n");
> + dev_dbg(dev, " Data Avail Int Support\n");
>
> /* INTERRUPT Setup */
> init_waitqueue_head(&chip->vendor.read_queue);
> @@ -649,7 +649,7 @@ static struct pnp_driver tis_pnp_driver = {
> .remove = tpm_tis_pnp_remove,
> };
>
> -#define TIS_HID_USR_IDX sizeof(tpm_pnp_tbl)/sizeof(struct pnp_device_id) -2
> +#define TIS_HID_USR_IDX (ARRAY_SIZE(tpm_pnp_tbl) - 2)
> module_param_string(hid, tpm_pnp_tbl[TIS_HID_USR_IDX].id,
> sizeof(tpm_pnp_tbl[TIS_HID_USR_IDX].id), 0444);
> MODULE_PARM_DESC(hid, "Set additional specific HID for this driver to probe");
next prev parent reply other threads:[~2009-09-10 19:56 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-01 1:04 [PATCH 0/6] tpm_tis: various cleanups, and support for Intel iTPM Andy Isaacson
2009-07-01 1:04 ` [PATCH 1/6] tpm_tis: various cleanups Andy Isaacson
2009-09-10 19:56 ` Rajiv Andrade [this message]
2009-07-01 1:04 ` [PATCH 2/6] tpm_tis: add MODULE_DEVICE_TABLE to enable autoload Andy Isaacson
2009-09-10 19:56 ` Rajiv Andrade
2009-07-01 1:04 ` [PATCH 3/6] tpm_tis: set timeouts before calling request_locality Andy Isaacson
2009-07-01 1:04 ` [PATCH 4/6] tpm_tis: print complete vendor information Andy Isaacson
2009-09-10 19:57 ` Rajiv Andrade
2009-07-01 1:04 ` [PATCH 5/6] tpm_tis: convert from pnp_driver to acpi_driver Andy Isaacson
2009-07-01 10:01 ` Alan Cox
2009-07-01 13:45 ` Rajiv Andrade
2009-07-16 17:26 ` Rajiv Andrade
2009-07-16 17:43 ` [PATCH] TPM: DATA_EXPECT bit check bypass Rajiv Andrade
2009-07-16 20:08 ` Valdis.Kletnieks
2009-07-16 20:50 ` Rajiv Andrade
2009-07-16 21:20 ` Rajiv Andrade
2009-07-20 23:28 ` Andy Isaacson
2009-07-24 17:12 ` Rajiv Andrade
2009-07-20 18:27 ` [PATCH 5/6] tpm_tis: convert from pnp_driver to acpi_driver Andy Isaacson
2009-09-10 19:08 ` Rajiv Andrade
2009-09-10 19:54 ` [PATCH] tpm_tis: TPM_STS_DATA_EXPECT workaround Rajiv Andrade
2009-09-10 19:58 ` Daniel Walker
2009-09-10 20:06 ` Rajiv Andrade
2009-09-10 20:09 ` Rajiv Andrade
2009-09-11 23:34 ` Seiji Munetoh
2009-09-24 18:43 ` Rajiv Andrade
2009-10-28 2:45 ` David Smith
2009-10-31 14:24 ` Eric Paris
2009-11-01 22:09 ` James Morris
2009-09-10 20:27 ` Andy Isaacson
2009-07-01 1:04 ` [PATCH 6/6] tpm_tis: add workarounds for iTPM Andy Isaacson
2009-07-03 18:18 ` [tpmdd-devel] " Marcin Obara
2009-07-03 19:33 ` Andy Isaacson
2009-07-03 20:10 ` Marcin Obara
2009-07-03 20:20 ` Andy Isaacson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1252612575.4837.109.camel@blackbox \
--to=srajiv@linux.vnet.ibm.com \
--cc=adi@hexapodia.org \
--cc=adi@vmware.com \
--cc=dds@google.com \
--cc=jmorris@namei.org \
--cc=linux-kernel@vger.kernel.org \
--cc=seiji.munetoh@gmail.com \
--cc=shaz.linux@gmail.com \
--cc=tpmdd-devel@lists.sourceforge.net \
--cc=zohar@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox