public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: John Stultz <john.stultz@linaro.org>
To: lkml <linux-kernel@vger.kernel.org>
Cc: John Stultz <john.stultz@linaro.org>,
	David Airlie <airlied@linux.ie>,
	Archit Taneja <architt@codeaurora.org>,
	Wolfram Sang <wsa+renesas@sang-engineering.com>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	dri-devel@lists.freedesktop.org
Subject: [RFC][PATCH 1/5 v2] drm/bridge: adv7511: Use work_struct to defer hotplug handing to out of irq context
Date: Mon, 28 Nov 2016 21:04:40 -0800	[thread overview]
Message-ID: <1480395884-5471-2-git-send-email-john.stultz@linaro.org> (raw)
In-Reply-To: <1480395884-5471-1-git-send-email-john.stultz@linaro.org>

I was recently seeing issues with EDID probing, where
the logic to wait for the EDID read bit to be set by the
IRQ wasn't happening and the code would time out and fail.

Digging deeper, I found this was due to the fact that
IRQs were disabled as we were running in IRQ context from
the HPD signal.

Thus this patch changes the logic to handle the HPD signal
via a work_struct so we can be out of irq context.

With this patch, the EDID probing on hotplug does not time
out.

Cc: David Airlie <airlied@linux.ie>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
v2: Reworked to properly fix the issue rather then
    just delaying for 200ms

 drivers/gpu/drm/bridge/adv7511/adv7511.h     |  2 ++
 drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 12 +++++++++++-
 2 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511.h b/drivers/gpu/drm/bridge/adv7511/adv7511.h
index 992d76c..2a1e722 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511.h
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
@@ -317,6 +317,8 @@ struct adv7511 {
 	bool edid_read;
 
 	wait_queue_head_t wq;
+	struct work_struct irq_work;
+
 	struct drm_bridge bridge;
 	struct drm_connector connector;
 
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index 8dba729..b38e743 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -402,6 +402,14 @@ static bool adv7511_hpd(struct adv7511 *adv7511)
 	return false;
 }
 
+static void adv7511_irq_work(struct work_struct *work)
+{
+	struct adv7511 *adv7511 = container_of(work, struct adv7511, irq_work);
+
+	drm_helper_hpd_irq_event(adv7511->connector.dev);
+}
+
+
 static int adv7511_irq_process(struct adv7511 *adv7511, bool process_hpd)
 {
 	unsigned int irq0, irq1;
@@ -419,7 +427,7 @@ static int adv7511_irq_process(struct adv7511 *adv7511, bool process_hpd)
 	regmap_write(adv7511->regmap, ADV7511_REG_INT(1), irq1);
 
 	if (process_hpd && irq0 & ADV7511_INT0_HPD && adv7511->bridge.encoder)
-		drm_helper_hpd_irq_event(adv7511->connector.dev);
+		schedule_work(&adv7511->irq_work);
 
 	if (irq0 & ADV7511_INT0_EDID_READY || irq1 & ADV7511_INT1_DDC_ERROR) {
 		adv7511->edid_read = true;
@@ -1006,6 +1014,8 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 			goto err_i2c_unregister_edid;
 	}
 
+	INIT_WORK(&adv7511->irq_work, adv7511_irq_work);
+
 	if (i2c->irq) {
 		init_waitqueue_head(&adv7511->wq);
 
-- 
2.7.4

  reply	other threads:[~2016-11-29  5:05 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-29  5:04 [RFC][PATCH 0/5 v2] adv7511 EDID probing improvements John Stultz
2016-11-29  5:04 ` John Stultz [this message]
2016-11-29  6:46   ` [RFC][PATCH 1/5 v2] drm/bridge: adv7511: Use work_struct to defer hotplug handing to out of irq context Laurent Pinchart
2016-11-29 17:04     ` John Stultz
2016-11-29  5:04 ` [RFC][PATCH 2/5 v2] drm/bridge: adv7511: Switch to using drm_kms_helper_hotplug_event() John Stultz
2016-11-29  6:50   ` Laurent Pinchart
2016-11-29 17:58     ` John Stultz
2016-11-29  5:04 ` [RFC][PATCH 3/5 v2] drm/bridge: adv7511: Enable HPD interrupts to support hotplug and improve monitor detection John Stultz
2016-11-29  5:04 ` [RFC][PATCH 4/5 v2] drm/bridge: adv7511: Rework adv7511_power_on/off() so they can be reused internally John Stultz
2016-11-29  5:04 ` [RFC][PATCH 5/5 v2] drm/bridge: adv7511: Reuse __adv7511_power_on/off() when probing EDID John Stultz
2016-11-30  4:42   ` Archit Taneja
2016-12-12  8:40 ` [RFC][PATCH 0/5 v2] adv7511 EDID probing improvements Archit Taneja
2016-12-12 19:06   ` John Stultz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1480395884-5471-2-git-send-email-john.stultz@linaro.org \
    --to=john.stultz@linaro.org \
    --cc=airlied@linux.ie \
    --cc=architt@codeaurora.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=lars@metafoo.de \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=wsa+renesas@sang-engineering.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox