[PATCH net v3] net: phy: marvell: Fix invalid comparison in the resume and suspend functions

[PATCH net v3] net: phy: marvell: Fix invalid comparison in the resume and suspend functions

[Kurt Cancemi]

This bug resulted in only the current mode being resumed and suspended when
the PHY supported both fiber and copper modes and when the PHY only supported
copper mode the fiber mode would incorrectly be attempted to be resumed and
suspended.

Fixes: 3758be3dc162 ("Marvell phy: add functions to suspend and resume both interfaces: fiber and copper links.")
Signed-off-by: Kurt Cancemi <kurt@x64architecture.com>
---

I removed the dot from the summary line.

 drivers/net/phy/marvell.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 2429db614b59..80b888a88127 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -1687,7 +1687,7 @@ static int marvell_suspend(struct phy_device *phydev)
 	int err;
 
 	/* Suspend the fiber mode first */
-	if (!linkmode_test_bit(ETHTOOL_LINK_MODE_FIBRE_BIT,
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_FIBRE_BIT,
 			       phydev->supported)) {
 		err = marvell_set_page(phydev, MII_MARVELL_FIBER_PAGE);
 		if (err < 0)
@@ -1722,7 +1722,7 @@ static int marvell_resume(struct phy_device *phydev)
 	int err;
 
 	/* Resume the fiber mode first */
-	if (!linkmode_test_bit(ETHTOOL_LINK_MODE_FIBRE_BIT,
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_FIBRE_BIT,
 			       phydev->supported)) {
 		err = marvell_set_page(phydev, MII_MARVELL_FIBER_PAGE);
 		if (err < 0)
-- 
2.35.1

Re: [PATCH net v3] net: phy: marvell: Fix invalid comparison in the resume and suspend functions

[Andrew Lunn]

On Sat, Mar 12, 2022 at 03:15:13PM -0500, Kurt Cancemi wrote:
> This bug resulted in only the current mode being resumed and suspended when
> the PHY supported both fiber and copper modes and when the PHY only supported
> copper mode the fiber mode would incorrectly be attempted to be resumed and
> suspended.
> 
> Fixes: 3758be3dc162 ("Marvell phy: add functions to suspend and resume both interfaces: fiber and copper links.")
> Signed-off-by: Kurt Cancemi <kurt@x64architecture.com>

Hi Kurt

Best practice is to add any Reviewed-by or Tested-by to the patch
whenever you repost it, except when you make major changes. Otherwise
they can get lost.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

Re: [PATCH net v3] net: phy: marvell: Fix invalid comparison in the resume and suspend functions

[Jakub Kicinski]

On Sat, 12 Mar 2022 15:15:13 -0500 Kurt Cancemi wrote:
> -	if (!linkmode_test_bit(ETHTOOL_LINK_MODE_FIBRE_BIT,
> +	if (linkmode_test_bit(ETHTOOL_LINK_MODE_FIBRE_BIT,
>  			       phydev->supported)) {

You should align the continuation lines so that the start matches 
the opening parenthesis. I'll fix it up when applying for you this 
time but please make sure to run checkpatch.pl --strict on patches
before submission. Thanks!

Re: [PATCH net v3] net: phy: marvell: Fix invalid comparison in the resume and suspend functions

[patchwork-bot+netdevbpf]

Hello:

This patch was applied to netdev/net.git (master)
by Jakub Kicinski <kuba@kernel.org>:

On Sat, 12 Mar 2022 15:15:13 -0500 you wrote:
> This bug resulted in only the current mode being resumed and suspended when
> the PHY supported both fiber and copper modes and when the PHY only supported
> copper mode the fiber mode would incorrectly be attempted to be resumed and
> suspended.
> 
> Fixes: 3758be3dc162 ("Marvell phy: add functions to suspend and resume both interfaces: fiber and copper links.")
> Signed-off-by: Kurt Cancemi <kurt@x64architecture.com>
> 
> [...]

Here is the summary with links:
  - [net,v3] net: phy: marvell: Fix invalid comparison in the resume and suspend functions
    https://git.kernel.org/netdev/net/c/837d9e49402e

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html