* [PATCH] adjust legacy IDE resource setting (v2)
@ 2007-02-15 8:02 Jan Beulich
2007-02-19 11:44 ` Alan Cox
0 siblings, 1 reply; 2+ messages in thread
From: Jan Beulich @ 2007-02-15 8:02 UTC (permalink / raw)
To: alan; +Cc: linux-kernel
The change to force legacy mode IDE channels' resources to fixed
non-zero values confuses (at least some versions of) X, because the
values reported by the kernel and those readable from PCI config space
aren't consistent anymore. Therefore, this patch arranges for the
respective BARs to also get updated if possible.
(The only change to the original version is an added comment.)
Signed-off-by: Jan Beulich <jbeulich@novell.com>
--- linux-2.6.20/drivers/pci/probe.c 2007-02-04 19:44:54.000000000 +0100
+++ 2.6.20-pci-ide-legacy/drivers/pci/probe.c 2007-02-15 08:54:58.000000000 +0100
@@ -639,7 +639,34 @@ static void pci_read_irq(struct pci_dev
dev->irq = irq;
}
-#define LEGACY_IO_RESOURCE (IORESOURCE_IO | IORESOURCE_PCI_FIXED)
+static void change_legacy_io_resource(struct pci_dev * dev, unsigned index,
+ unsigned start, unsigned end)
+{
+ unsigned base = start & PCI_BASE_ADDRESS_IO_MASK;
+ unsigned len = (end | ~PCI_BASE_ADDRESS_IO_MASK) - base + 1;
+
+ /*
+ * Some X versions get confused when the BARs reported through
+ * /sys or /proc differ from those seen in config space, thus
+ * try to update the config space values, too.
+ */
+ if (!(pci_resource_flags(dev, index) & IORESOURCE_IO))
+ printk(KERN_WARNING "%s: cannot adjust BAR%u (not I/O)\n",
+ pci_name(dev), index);
+ else if (pci_resource_len(dev, index) != len)
+ printk(KERN_WARNING "%s: cannot adjust BAR%u (size %04X)\n",
+ pci_name(dev), index, (unsigned)pci_resource_len(dev, index));
+ else {
+ printk(KERN_INFO "%s: trying to change BAR%u from %04X to %04X\n",
+ pci_name(dev), index,
+ (unsigned)pci_resource_start(dev, index), base);
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + index * 4, base);
+ }
+ pci_resource_start(dev, index) = start;
+ pci_resource_end(dev, index) = end;
+ pci_resource_flags(dev, index) =
+ IORESOURCE_IO | IORESOURCE_PCI_FIXED | PCI_BASE_ADDRESS_SPACE_IO;
+}
/**
* pci_setup_device - fill in class and map information of a device
@@ -692,20 +719,12 @@ static int pci_setup_device(struct pci_d
u8 progif;
pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
if ((progif & 1) == 0) {
- dev->resource[0].start = 0x1F0;
- dev->resource[0].end = 0x1F7;
- dev->resource[0].flags = LEGACY_IO_RESOURCE;
- dev->resource[1].start = 0x3F6;
- dev->resource[1].end = 0x3F6;
- dev->resource[1].flags = LEGACY_IO_RESOURCE;
+ change_legacy_io_resource(dev, 0, 0x1F0, 0x1F7);
+ change_legacy_io_resource(dev, 1, 0x3F6, 0x3F6);
}
if ((progif & 4) == 0) {
- dev->resource[2].start = 0x170;
- dev->resource[2].end = 0x177;
- dev->resource[2].flags = LEGACY_IO_RESOURCE;
- dev->resource[3].start = 0x376;
- dev->resource[3].end = 0x376;
- dev->resource[3].flags = LEGACY_IO_RESOURCE;
+ change_legacy_io_resource(dev, 2, 0x170, 0x177);
+ change_legacy_io_resource(dev, 3, 0x376, 0x376);
}
}
break;
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: [PATCH] adjust legacy IDE resource setting (v2)
2007-02-15 8:02 [PATCH] adjust legacy IDE resource setting (v2) Jan Beulich
@ 2007-02-19 11:44 ` Alan Cox
0 siblings, 0 replies; 2+ messages in thread
From: Alan Cox @ 2007-02-19 11:44 UTC (permalink / raw)
To: Jan Beulich; +Cc: alan, linux-kernel
On Thu, Feb 15, 2007 at 08:02:21AM +0000, Jan Beulich wrote:
> The change to force legacy mode IDE channels' resources to fixed
> non-zero values confuses (at least some versions of) X, because the
> values reported by the kernel and those readable from PCI config space
> aren't consistent anymore. Therefore, this patch arranges for the
> respective BARs to also get updated if possible.
>
> (The only change to the original version is an added comment.)
>
> Signed-off-by: Jan Beulich <jbeulich@novell.com>
Acked-by: Alan Cox <alan@redhat.com>
>
> --- linux-2.6.20/drivers/pci/probe.c 2007-02-04 19:44:54.000000000 +0100
> +++ 2.6.20-pci-ide-legacy/drivers/pci/probe.c 2007-02-15 08:54:58.000000000 +0100
> @@ -639,7 +639,34 @@ static void pci_read_irq(struct pci_dev
> dev->irq = irq;
> }
>
> -#define LEGACY_IO_RESOURCE (IORESOURCE_IO | IORESOURCE_PCI_FIXED)
> +static void change_legacy_io_resource(struct pci_dev * dev, unsigned index,
> + unsigned start, unsigned end)
> +{
> + unsigned base = start & PCI_BASE_ADDRESS_IO_MASK;
> + unsigned len = (end | ~PCI_BASE_ADDRESS_IO_MASK) - base + 1;
> +
> + /*
> + * Some X versions get confused when the BARs reported through
> + * /sys or /proc differ from those seen in config space, thus
> + * try to update the config space values, too.
> + */
> + if (!(pci_resource_flags(dev, index) & IORESOURCE_IO))
> + printk(KERN_WARNING "%s: cannot adjust BAR%u (not I/O)\n",
> + pci_name(dev), index);
> + else if (pci_resource_len(dev, index) != len)
> + printk(KERN_WARNING "%s: cannot adjust BAR%u (size %04X)\n",
> + pci_name(dev), index, (unsigned)pci_resource_len(dev, index));
> + else {
> + printk(KERN_INFO "%s: trying to change BAR%u from %04X to %04X\n",
> + pci_name(dev), index,
> + (unsigned)pci_resource_start(dev, index), base);
> + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + index * 4, base);
> + }
> + pci_resource_start(dev, index) = start;
> + pci_resource_end(dev, index) = end;
> + pci_resource_flags(dev, index) =
> + IORESOURCE_IO | IORESOURCE_PCI_FIXED | PCI_BASE_ADDRESS_SPACE_IO;
> +}
>
> /**
> * pci_setup_device - fill in class and map information of a device
> @@ -692,20 +719,12 @@ static int pci_setup_device(struct pci_d
> u8 progif;
> pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
> if ((progif & 1) == 0) {
> - dev->resource[0].start = 0x1F0;
> - dev->resource[0].end = 0x1F7;
> - dev->resource[0].flags = LEGACY_IO_RESOURCE;
> - dev->resource[1].start = 0x3F6;
> - dev->resource[1].end = 0x3F6;
> - dev->resource[1].flags = LEGACY_IO_RESOURCE;
> + change_legacy_io_resource(dev, 0, 0x1F0, 0x1F7);
> + change_legacy_io_resource(dev, 1, 0x3F6, 0x3F6);
> }
> if ((progif & 4) == 0) {
> - dev->resource[2].start = 0x170;
> - dev->resource[2].end = 0x177;
> - dev->resource[2].flags = LEGACY_IO_RESOURCE;
> - dev->resource[3].start = 0x376;
> - dev->resource[3].end = 0x376;
> - dev->resource[3].flags = LEGACY_IO_RESOURCE;
> + change_legacy_io_resource(dev, 2, 0x170, 0x177);
> + change_legacy_io_resource(dev, 3, 0x376, 0x376);
> }
> }
> break;
>
--
--
In Ximian did mad Miguel a mighty mail client decree
Where Nat the crazy hacker ran
Through sourcecode measureless to man
And never coredump free
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2007-02-19 11:44 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-02-15 8:02 [PATCH] adjust legacy IDE resource setting (v2) Jan Beulich
2007-02-19 11:44 ` Alan Cox
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox