public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Jesse Barnes <jbarnes@virtuousgeek.org>
To: linux-pci@atrey.karlin.mff.cuni.cz
Cc: Andi Kleen <andi@firstfloor.org>, Jean Delvare <jdelvare@suse.de>,
	LKML <linux-kernel@vger.kernel.org>, Pavel Machek <pavel@ucw.cz>,
	Tejun Heo <htejun@gmail.com>,
	Tom Long Nguyen <tom.l.nguyen@intel.com>,
	Randy Dunlap <rdunlap@xenotime.net>,
	Jeff Garzik <jgarzik@pobox.com>
Subject: Re: PCI MSI breaks when booting with nosmp
Date: Mon, 21 Apr 2008 12:35:23 -0700	[thread overview]
Message-ID: <200804211235.25174.jbarnes@virtuousgeek.org> (raw)
In-Reply-To: <200804211207.00961.jbarnes@virtuousgeek.org>

On Monday, April 21, 2008 12:06 pm Jesse Barnes wrote:
> On Monday, April 21, 2008 11:45 am Andi Kleen wrote:
> > Jesse Barnes <jbarnes@virtuousgeek.org> writes:
> > > Ok, I see this too on my desktop machine.  It looks like we're not
> > > getting interrupts setup correctly in the nosmp case.  Still digging
> > > through to see why though...
> >
> > NoSMP disables the io-apic and a lot of modern systems don't work without
> > APIC.
> >
> > If you just want to run with a single cpu for testing etc. always use
> > maxcpus=1 (not 0, that will disable the APIC too)
>
> Right...  but it looks like the MSI code is buggy when noapic is specified
> via nosmp or maxcpus=0.  We should either fix it to work with noapic or
> disable it like we do the ioapic when nosmp or maxcpus=0:

Or if you want something that compiles & works (at least on my machine) here 
it is.  But the fact that noapic alone doesn't cause the bug means there's 
probably something depending on !setup_max_cpus that needs fixing instead.

Jesse

diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index eabeb1f..9170589 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -39,14 +39,6 @@ extern struct rw_semaphore pci_bus_sem;
 
 extern unsigned int pci_pm_d3_delay;
 
-#ifdef CONFIG_PCI_MSI
-void pci_no_msi(void);
-extern void pci_msi_init_pci_dev(struct pci_dev *dev);
-#else
-static inline void pci_no_msi(void) { }
-static inline void pci_msi_init_pci_dev(struct pci_dev *dev) { }
-#endif
-
 #ifdef CONFIG_PCIEAER
 void pci_no_aer(void);
 #else
diff --git a/include/linux/pci.h b/include/linux/pci.h
index ea760e5..0ed53d6 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -590,6 +590,13 @@ int pci_try_set_mwi(struct pci_dev *dev);
 void pci_clear_mwi(struct pci_dev *dev);
 void pci_intx(struct pci_dev *dev, int enable);
 void pci_msi_off(struct pci_dev *dev);
+#ifdef CONFIG_PCI_MSI
+void pci_no_msi(void);
+extern void pci_msi_init_pci_dev(struct pci_dev *dev);
+#else
+static inline void pci_no_msi(void) { }
+static inline void pci_msi_init_pci_dev(struct pci_dev *dev) { }
+#endif
 int pci_set_dma_mask(struct pci_dev *dev, u64 mask);
 int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask);
 int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size);
diff --git a/init/main.c b/init/main.c
index 99ce949..a9436b7 100644
--- a/init/main.c
+++ b/init/main.c
@@ -58,6 +58,7 @@
 #include <linux/kthread.h>
 #include <linux/sched.h>
 #include <linux/signal.h>
+#include <linux/pci.h>
 
 #include <asm/io.h>
 #include <asm/bugs.h>
@@ -148,6 +149,7 @@ static int __init nosmp(char *str)
 {
 	setup_max_cpus = 0;
 	disable_ioapic_setup();
+	pci_no_msi();
 	return 0;
 }
 
@@ -156,9 +158,10 @@ early_param("nosmp", nosmp);
 static int __init maxcpus(char *str)
 {
 	get_option(&str, &setup_max_cpus);
-	if (setup_max_cpus == 0)
+	if (setup_max_cpus == 0) {
 		disable_ioapic_setup();
-
+		pci_no_msi();
+	}
 	return 0;
 }
 


  reply	other threads:[~2008-04-21 19:40 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-04-17 19:40 PCI MSI breaks when booting with nosmp Jean Delvare
2008-04-17 20:08 ` Jesse Barnes
2008-04-17 20:25   ` Jean Delvare
2008-04-21 17:43     ` Jesse Barnes
2008-04-21 18:45       ` Andi Kleen
2008-04-21 19:06         ` Jesse Barnes
2008-04-21 19:35           ` Jesse Barnes [this message]
2008-04-21 19:41           ` Andi Kleen
2008-04-21 19:43         ` Pavel Machek
2008-04-21 19:44           ` Andi Kleen
2008-04-22 21:25             ` Pavel Machek
2008-04-22 23:07               ` Jesse Barnes
2008-04-21 20:20         ` Jean Delvare
2008-04-21 20:40           ` Jesse Barnes
2008-04-21 20:46           ` Andi Kleen
2008-04-21 20:48             ` Jean Delvare
2008-04-21 21:09               ` Andi Kleen
2008-04-21 21:14                 ` Jesse Barnes
2008-04-22 13:27                   ` Jean Delvare
2008-04-22 15:50                     ` Jesse Barnes
2008-04-23 14:38                   ` Jean Delvare
2008-04-23 15:12                     ` Jesse Barnes
2008-04-23 18:13                       ` Maciej W. Rozycki
2008-04-23 18:23                         ` Jesse Barnes
2008-04-23 18:32                           ` Jesse Barnes
2008-04-23 18:32                           ` Jean Delvare
2008-04-23 18:38                           ` Maciej W. Rozycki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200804211235.25174.jbarnes@virtuousgeek.org \
    --to=jbarnes@virtuousgeek.org \
    --cc=andi@firstfloor.org \
    --cc=htejun@gmail.com \
    --cc=jdelvare@suse.de \
    --cc=jgarzik@pobox.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@atrey.karlin.mff.cuni.cz \
    --cc=pavel@ucw.cz \
    --cc=rdunlap@xenotime.net \
    --cc=tom.l.nguyen@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox