From: Thomas Gleixner <tglx@linutronix.de>
To: LKML <linux-kernel@vger.kernel.org>
Cc: x86 team <x86@kernel.org>,
Andrew Morton <akpm@linux-foundation.org>,
Peter Zijlstra <peterz@infradead.org>,
Arjan van de Veen <arjan@infradead.org>,
Avi Kivity <avi@redhat.com>,
Jeremy Fitzhardinge <jeremy@goop.org>,
Rusty Russell <rusty@rustcorp.com.au>,
Alok N Kataria <akataria@vmware.com>,
Pan Jacob jun <jacob.jun.pan@intel.com>
Subject: [RFC patch 20/32] x86: Move percpu clockevents setup to platform
Date: Fri, 21 Aug 2009 21:31:14 -0000 [thread overview]
Message-ID: <20090821205602.770249126@linutronix.de> (raw)
In-Reply-To: 20090821205008.518392436@linutronix.de
[-- Attachment #1: x86-platform-support-for-per-cpu-timer-setup.patch --]
[-- Type: text/plain, Size: 8452 bytes --]
paravirt overrides the setup of the default apic timers as per cpu
timers. Moorestown needs to override that as well.
Move it to platform setup and create a separate
platform_cpuhotplug_setup struct which holds the function for the
secondary evtl. hotplugabble CPUs.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/include/asm/apic.h | 3 ---
arch/x86/include/asm/paravirt.h | 15 ---------------
arch/x86/include/asm/platform.h | 19 +++++++++++++++++++
arch/x86/kernel/apic/apic.c | 3 ++-
arch/x86/kernel/kvmclock.c | 5 ++++-
arch/x86/kernel/paravirt.c | 2 --
arch/x86/kernel/platform_setup.c | 9 +++++++++
arch/x86/kernel/smpboot.c | 4 ++--
arch/x86/kernel/vmi_32.c | 5 +++--
arch/x86/xen/enlighten.c | 6 ++++--
10 files changed, 43 insertions(+), 28 deletions(-)
Index: linux-2.6/arch/x86/include/asm/apic.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/apic.h
+++ linux-2.6/arch/x86/include/asm/apic.h
@@ -70,9 +70,6 @@ static inline void default_inquire_remot
*/
#ifdef CONFIG_PARAVIRT
#include <asm/paravirt.h>
-#else
-#define setup_boot_clock setup_boot_APIC_clock
-#define setup_secondary_clock setup_secondary_APIC_clock
#endif
#ifdef CONFIG_X86_64
Index: linux-2.6/arch/x86/include/asm/paravirt.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/paravirt.h
+++ linux-2.6/arch/x86/include/asm/paravirt.h
@@ -228,9 +228,6 @@ struct pv_irq_ops {
struct pv_apic_ops {
#ifdef CONFIG_X86_LOCAL_APIC
- void (*setup_boot_clock)(void);
- void (*setup_secondary_clock)(void);
-
void (*startup_ipi_hook)(int phys_apicid,
unsigned long start_eip,
unsigned long start_esp);
@@ -995,18 +992,6 @@ static inline void slow_down_io(void)
#endif
}
-#ifdef CONFIG_X86_LOCAL_APIC
-static inline void setup_boot_clock(void)
-{
- PVOP_VCALL0(pv_apic_ops.setup_boot_clock);
-}
-
-static inline void setup_secondary_clock(void)
-{
- PVOP_VCALL0(pv_apic_ops.setup_secondary_clock);
-}
-#endif
-
#ifdef CONFIG_SMP
static inline void startup_ipi_hook(int phys_apicid, unsigned long start_eip,
unsigned long start_esp)
Index: linux-2.6/arch/x86/include/asm/platform.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/platform.h
+++ linux-2.6/arch/x86/include/asm/platform.h
@@ -85,6 +85,15 @@ struct platform_setup_paging {
};
/**
+ * struct platform_setup_timers - platform specific timer setup
+ * @setup_perpcu_clockev: set up the per cpu clock event device for the
+ * boot cpu
+ */
+struct platform_setup_timers {
+ void (*setup_percpu_clockev)(void);
+};
+
+/**
* struct platform_setup_ops - functions for platform specific setup
*
*/
@@ -94,10 +103,20 @@ struct platform_setup_ops {
struct platform_setup_irqs irqs;
struct platform_setup_oem oem;
struct platform_setup_paging paging;
+ struct platform_setup_timers timers;
struct platform_setup_quirks quirks;
};
+/**
+ * struct platform_setup_cpuhotplug - platform specific cpu hotplug setups
+ * @setup_percpu_clockev: set up the per cpu clock event device
+ */
+struct platform_setup_cpuhotplug {
+ void (*setup_percpu_clockev)(void);
+};
+
extern struct platform_setup_ops platform_setup;
+extern struct platform_setup_cpuhotplug platform_cpuhotplug_setup;
extern void platform_setup_noop(void);
extern void platform_setup_uint_noop(unsigned int unused);
Index: linux-2.6/arch/x86/kernel/apic/apic.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/apic.c
+++ linux-2.6/arch/x86/kernel/apic/apic.c
@@ -36,6 +36,7 @@
#include <linux/mm.h>
#include <asm/perf_counter.h>
+#include <asm/platform.h>
#include <asm/pgalloc.h>
#include <asm/atomic.h>
#include <asm/mpspec.h>
@@ -1701,7 +1702,7 @@ int __init APIC_init_uniprocessor(void)
localise_nmi_watchdog();
#endif
- setup_boot_clock();
+ platform_setup.timers.setup_percpu_clockev();
#ifdef CONFIG_X86_64
check_nmi_watchdog();
#endif
Index: linux-2.6/arch/x86/kernel/kvmclock.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/kvmclock.c
+++ linux-2.6/arch/x86/kernel/kvmclock.c
@@ -22,6 +22,8 @@
#include <asm/msr.h>
#include <asm/apic.h>
#include <linux/percpu.h>
+
+#include <asm/platform.h>
#include <asm/reboot.h>
#define KVM_SCALE 22
@@ -187,7 +189,8 @@ void __init kvmclock_init(void)
pv_time_ops.sched_clock = kvm_clock_read;
pv_time_ops.get_tsc_khz = kvm_get_tsc_khz;
#ifdef CONFIG_X86_LOCAL_APIC
- pv_apic_ops.setup_secondary_clock = kvm_setup_secondary_clock;
+ platform_cpuhotplug_setup.setup_percpu_clockev =
+ kvm_setup_secondary_clock;
#endif
#ifdef CONFIG_SMP
smp_ops.smp_prepare_boot_cpu = kvm_smp_prepare_boot_cpu;
Index: linux-2.6/arch/x86/kernel/paravirt.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/paravirt.c
+++ linux-2.6/arch/x86/kernel/paravirt.c
@@ -387,8 +387,6 @@ struct pv_cpu_ops pv_cpu_ops = {
struct pv_apic_ops pv_apic_ops = {
#ifdef CONFIG_X86_LOCAL_APIC
- .setup_boot_clock = setup_boot_APIC_clock,
- .setup_secondary_clock = setup_secondary_APIC_clock,
.startup_ipi_hook = paravirt_nop,
#endif
};
Index: linux-2.6/arch/x86/kernel/platform_setup.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/platform_setup.c
+++ linux-2.6/arch/x86/kernel/platform_setup.c
@@ -8,6 +8,7 @@
#include <asm/bios_ebda.h>
#include <asm/mpspec.h>
#include <asm/setup.h>
+#include <asm/apic.h>
#include <asm/e820.h>
#include <asm/irq.h>
@@ -53,7 +54,15 @@ struct __initdata platform_setup_ops pla
.pagetable_setup_done = native_pagetable_setup_done,
},
+ .timers = {
+ .setup_percpu_clockev = setup_boot_APIC_clock,
+ },
+
.quirks = {
.mpc_record = platform_setup_uint_noop,
},
};
+
+__cpuinitdata struct platform_setup_cpuhotplug platform_cpuhotplug_setup = {
+ .setup_percpu_clockev = setup_secondary_APIC_clock,
+};
Index: linux-2.6/arch/x86/kernel/smpboot.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/smpboot.c
+++ linux-2.6/arch/x86/kernel/smpboot.c
@@ -323,7 +323,7 @@ notrace static void __cpuinit start_seco
/* enable local interrupts */
local_irq_enable();
- setup_secondary_clock();
+ platform_cpuhotplug_setup.setup_percpu_clockev();
wmb();
cpu_idle();
@@ -1112,7 +1112,7 @@ void __init native_smp_prepare_cpus(unsi
printk(KERN_INFO "CPU%d: ", 0);
print_cpu_info(&cpu_data(0));
- setup_boot_clock();
+ platform_setup.timers.setup_percpu_clockev();
if (is_uv_system())
uv_system_init();
Index: linux-2.6/arch/x86/kernel/vmi_32.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/vmi_32.c
+++ linux-2.6/arch/x86/kernel/vmi_32.c
@@ -821,8 +821,9 @@ static inline int __init activate_vmi(vo
pv_time_ops.get_wallclock = vmi_get_wallclock;
pv_time_ops.set_wallclock = vmi_set_wallclock;
#ifdef CONFIG_X86_LOCAL_APIC
- pv_apic_ops.setup_boot_clock = vmi_time_bsp_init;
- pv_apic_ops.setup_secondary_clock = vmi_time_ap_init;
+ platform_setup.timers.setup_percpu_clockev = vmi_time_bsp_init;
+ platform_cpuhotplug_setup.setup_percpu_clockev =
+ vmi_time_ap_init;
#endif
pv_time_ops.sched_clock = vmi_sched_clock;
pv_time_ops.get_tsc_khz = vmi_tsc_khz;
Index: linux-2.6/arch/x86/xen/enlighten.c
===================================================================
--- linux-2.6.orig/arch/x86/xen/enlighten.c
+++ linux-2.6/arch/x86/xen/enlighten.c
@@ -912,8 +912,6 @@ static const struct pv_cpu_ops xen_cpu_o
static const struct pv_apic_ops xen_apic_ops __initdata = {
#ifdef CONFIG_X86_LOCAL_APIC
- .setup_boot_clock = paravirt_nop,
- .setup_secondary_clock = paravirt_nop,
.startup_ipi_hook = paravirt_nop,
#endif
};
@@ -984,6 +982,10 @@ asmlinkage void __init xen_start_kernel(
platform_setup.oem.arch_setup = xen_arch_setup;
platform_setup.oem.banner = xen_banner;
+ /* Override the default per cpu clockevents setup functions */
+ platform_setup.timers.setup_percpu_clockev = platform_setup_noop;
+ platform_cpuhotplug_setup.setup_percpu_clockev = platform_setup_noop;
+
xen_init_mmu_ops();
xen_init_irq_ops();
next prev parent reply other threads:[~2009-08-21 21:32 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-21 21:29 [RFC patch 00/32] x86: Refactor the setup code to provide a base for embedded platforms Thomas Gleixner
2009-08-21 21:29 ` [RFC patch 01/32] x86: Add platform_setup infrastructure Thomas Gleixner
2009-08-21 21:29 ` [RFC patch 02/32] x86: Add probe_roms to platform_setup Thomas Gleixner
2009-08-21 22:23 ` Jeremy Fitzhardinge
2009-08-21 22:36 ` Thomas Gleixner
2009-08-28 21:52 ` [RFC PATCH 0/7] x86/boot: Moorestown patch set based on platform_set abstraction Pan, Jacob jun
2009-08-29 16:59 ` Thomas Gleixner
2009-08-28 21:52 ` [RFC PATCH 2/7] x86: introduce a set of platform feature flags Pan, Jacob jun
2009-08-28 21:52 ` [RFC PATCH 3/7] x86: add moorestown specific platform setup code Pan, Jacob jun
2009-08-29 17:20 ` Thomas Gleixner
2009-08-28 21:53 ` [RFC PATCH 4/7] x86/apbt: Moorestown APB system timer driver Pan, Jacob jun
2009-08-28 21:53 ` [RFC PATCH 5/7] x86/apic: decouple legacy irq handling in ioapic Pan, Jacob jun
2009-08-28 21:53 ` [RFC PATCH 6/7] x86/apic: Early setup IOAPIC for APB timer Pan, Jacob jun
2009-08-28 21:53 ` [RFC PATCH 7/7] x86: add more platform_setup functions Pan, Jacob jun
2009-08-29 17:31 ` Thomas Gleixner
2009-08-21 21:29 ` [RFC patch 03/32] x86: Add request_standard_resources to platform_setup Thomas Gleixner
2009-08-21 21:29 ` [RFC patch 04/32] x86: Add reserve_ebda_region " Thomas Gleixner
2009-08-21 21:29 ` [RFC patch 05/32] x86: Move memory_setup to platform Thomas Gleixner
2009-08-21 21:29 ` [RFC patch 06/32] x86: Sanitize smp_record and move it to platform_setup Thomas Gleixner
2009-08-21 21:30 ` [RFC patch 07/32] x86: Move ioapic_ids_setup " Thomas Gleixner
2009-08-21 21:30 ` [RFC patch 08/32] x86: Move mpc_apic_id " Thomas Gleixner
2009-08-21 21:30 ` [RFC patch 09/32] x86: Move smp_read_mpc_oem " Thomas Gleixner
2009-08-21 21:30 ` [RFC patch 10/32] x86: Move mpc_oem_pci_bus " Thomas Gleixner
2009-08-21 21:30 ` [RFC patch 11/32] x86: Move oem_bus_info " Thomas Gleixner
2009-08-21 21:30 ` [RFC patch 12/32] x86: Move get/find_smp_config " Thomas Gleixner
2009-08-21 21:30 ` [RFC patch 13/32] x86: Move pre_intr_init " Thomas Gleixner
2009-08-21 21:30 ` [RFC patch 14/32] x86: Move irq_init " Thomas Gleixner
2009-08-21 21:30 ` [RFC patch 15/32] x86: Move traps_init " Thomas Gleixner
2009-08-21 21:30 ` [RFC patch 16/32] x86: Replace ARCH_SETUP by a proper platform function Thomas Gleixner
2009-08-21 22:30 ` Jeremy Fitzhardinge
2009-08-21 23:42 ` Thomas Gleixner
2009-08-28 21:52 ` [PATCH 1/7] x86/boot: adding hw subarch ID for Moorestown Pan, Jacob jun
2009-08-29 16:58 ` Thomas Gleixner
2009-08-21 21:30 ` [RFC patch 17/32] x86: Move paravirt banner printout to platform Thomas Gleixner
2009-08-21 21:30 ` [RFC patch 18/32] x86: Move paravirt pagetable_setup " Thomas Gleixner
2009-08-21 21:31 ` [RFC patch 19/32] x86: Move xen_post_allocator_init into xen_pagetable_setup_done Thomas Gleixner
2009-08-21 21:31 ` Thomas Gleixner [this message]
2009-08-21 21:31 ` [RFC patch 21/32] x86: Add timer_init to platform Thomas Gleixner
2009-08-24 6:48 ` Andrey Panin
2009-08-21 21:31 ` [RFC patch 22/32] x86: Remove do_timer hook Thomas Gleixner
2009-08-21 21:31 ` [RFC patch 23/32] x86: Prepare unification of time_32/64.c Thomas Gleixner
2009-08-21 21:31 ` [RFC patch 24/32] x86: Simplify timer_ack magic in time_32.c Thomas Gleixner
2009-08-21 21:31 ` [RFC patch 25/32] x86: Remove mca bus ifdef from timer interrupt Thomas Gleixner
2009-08-21 21:31 ` [RFC patch 26/32] x86: Make timer setup and global variables the same in time_32/64.c Thomas Gleixner
2009-08-21 21:31 ` [RFC patch 27/32] x86: Move calibrate_cpu to tsc.c Thomas Gleixner
2009-08-21 21:32 ` [RFC patch 28/32] x86: time_32/64.c unify profile_pc Thomas Gleixner
2009-08-21 21:32 ` [RFC patch 29/32] x86: Replace the now identical time_32/64.c by time.c Thomas Gleixner
2009-08-21 21:32 ` [RFC patch 30/32] x86: Move tsc_calibration to platform Thomas Gleixner
2009-08-21 21:32 ` [RFC patch 31/32] init: Move sched_clock_init after late_time_init Thomas Gleixner
2009-08-21 21:32 ` [RFC patch 32/32] x86: Move tsc_init to late_time_init Thomas Gleixner
2009-08-21 22:19 ` [RFC patch 00/32] x86: Refactor the setup code to provide a base for embedded platforms Jeremy Fitzhardinge
2009-08-22 10:57 ` Ingo Molnar
2009-08-23 9:15 ` Thomas Gleixner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090821205602.770249126@linutronix.de \
--to=tglx@linutronix.de \
--cc=akataria@vmware.com \
--cc=akpm@linux-foundation.org \
--cc=arjan@infradead.org \
--cc=avi@redhat.com \
--cc=jacob.jun.pan@intel.com \
--cc=jeremy@goop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peterz@infradead.org \
--cc=rusty@rustcorp.com.au \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox