Re: [PATCH 07/18] backlight: ili922x: remove 'else' after a return

[Lee Jones <lee.jones@linaro.org>]

On Tue, 26 Aug 2014, Jingoo Han wrote:

> Fixed the following checkpatch warning.
> 
>   WARNING: else is not generally useful after a break or return
> 
> Signed-off-by: Jingoo Han <jg1.han@samsung.com>
> ---
>  drivers/video/backlight/ili922x.c | 11 ++++++-----
>  1 file changed, 6 insertions(+), 5 deletions(-)

Acked-by: Lee Jones <lee.jones@linaro.org>

> diff --git a/drivers/video/backlight/ili922x.c b/drivers/video/backlight/ili922x.c
> index ea67fe199e34..e7f0890cc211 100644
> --- a/drivers/video/backlight/ili922x.c
> +++ b/drivers/video/backlight/ili922x.c
> @@ -495,17 +495,18 @@ static int ili922x_probe(struct spi_device *spi)
>  			"no LCD found: Chip ID 0x%x, ret %d\n",
>  			reg, ret);
>  		return -ENODEV;
> -	} else {
> -		dev_info(&spi->dev, "ILI%x found, SPI freq %d, mode %d\n",
> -			 reg, spi->max_speed_hz, spi->mode);
>  	}
>  
> +	dev_info(&spi->dev, "ILI%x found, SPI freq %d, mode %d\n",
> +		 reg, spi->max_speed_hz, spi->mode);
> +
>  	ret = ili922x_read_status(spi, &reg);
>  	if (ret) {
>  		dev_err(&spi->dev, "reading RS failed...\n");
>  		return ret;
> -	} else
> -		dev_dbg(&spi->dev, "status: 0x%x\n", reg);
> +	}
> +
> +	dev_dbg(&spi->dev, "status: 0x%x\n", reg);
>  
>  	ili922x_display_init(spi);
>  

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog