From: Lee Jones <lee.jones@linaro.org>
To: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Sangbeom Kim <sbkim73@samsung.com>,
Samuel Ortiz <sameo@linux.intel.com>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 2/3] mfd: sec: Cleanup unused RTC fields: ono, WTSR and SMPL
Date: Thu, 26 Feb 2015 11:01:19 +0000 [thread overview]
Message-ID: <20150226110119.GM6688@x1> (raw)
In-Reply-To: <1424942031-28370-2-git-send-email-k.kozlowski@samsung.com>
On Thu, 26 Feb 2015, Krzysztof Kozlowski wrote:
> The WTSR (Watchdog Timer Software Reset) and SMPL (Sudden Momentary
> Power Loss) were removed from rtc-s5m driver because they were not used.
> Remove them (and on/off interrupt) from main MFD driver and header.
>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
>
> ---
> Changes since v1:
> 1. Split out ENOMEM message removal to separate patch (suggested by
> Lee).
> ---
> drivers/mfd/sec-core.c | 1 -
> include/linux/mfd/samsung/core.h | 9 ---------
> 2 files changed, 10 deletions(-)
Applied, thanks.
> diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
> index 0a7bc43db4e4..423a2d3da4b2 100644
> --- a/drivers/mfd/sec-core.c
> +++ b/drivers/mfd/sec-core.c
> @@ -333,7 +333,6 @@ static int sec_pmic_probe(struct i2c_client *i2c,
> }
> if (pdata) {
> sec_pmic->device_type = pdata->device_type;
> - sec_pmic->ono = pdata->ono;
> sec_pmic->irq_base = pdata->irq_base;
> sec_pmic->wakeup = pdata->wakeup;
> sec_pmic->pdata = pdata;
> diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
> index 3fdb7cfbffb3..75115384f3fc 100644
> --- a/include/linux/mfd/samsung/core.h
> +++ b/include/linux/mfd/samsung/core.h
> @@ -58,13 +58,7 @@ enum sec_device_type {
> * @irq_base: Base IRQ number for device, required for IRQs
> * @irq: Generic IRQ number for device
> * @irq_data: Runtime data structure for IRQ controller
> - * @ono: Power onoff IRQ number for s5m87xx
> * @wakeup: Whether or not this is a wakeup device
> - * @wtsr_smpl: Whether or not to enable in RTC driver the Watchdog
> - * Timer Software Reset (registers set to default value
> - * after PWRHOLD falling) and Sudden Momentary Power Loss
> - * (PMIC will enter power on sequence after short drop in
> - * VBATT voltage).
> */
> struct sec_pmic_dev {
> struct device *dev;
> @@ -77,9 +71,7 @@ struct sec_pmic_dev {
> int irq;
> struct regmap_irq_chip_data *irq_data;
>
> - int ono;
> bool wakeup;
> - bool wtsr_smpl;
> };
>
> int sec_irq_init(struct sec_pmic_dev *sec_pmic);
> @@ -95,7 +87,6 @@ struct sec_platform_data {
> int irq_base;
> int (*cfg_pmic_irq)(void);
>
> - int ono;
> bool wakeup;
> bool buck_voltage_lock;
>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
next prev parent reply other threads:[~2015-02-26 11:01 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-26 9:13 [PATCH v2 1/3] rtc: s5m: Remove unused watchdog and sudden momentary power loss Krzysztof Kozlowski
2015-02-26 9:13 ` [PATCH v2 2/3] mfd: sec: Cleanup unused RTC fields: ono, WTSR and SMPL Krzysztof Kozlowski
2015-02-26 11:01 ` Lee Jones [this message]
2015-02-26 9:13 ` [PATCH v2 3/3] mfd: sec: Remove unnecessary out of memory message Krzysztof Kozlowski
2015-02-26 11:01 ` Lee Jones
2015-02-26 10:47 ` [PATCH v2 1/3] rtc: s5m: Remove unused watchdog and sudden momentary power loss Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150226110119.GM6688@x1 \
--to=lee.jones@linaro.org \
--cc=k.kozlowski@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sameo@linux.intel.com \
--cc=sbkim73@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox