From: "Felipe F. Tonello" <eu@felipetonello.com>
To: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Felipe Balbi <balbi@kernel.org>,
Michal Nazarewicz <mina86@mina86.com>
Subject: [PATCH v3 5/9] usb: gadget: f_midi: refactor state machine
Date: Fri, 5 Aug 2016 19:34:57 +0100 [thread overview]
Message-ID: <20160805183501.11993-6-eu@felipetonello.com> (raw)
In-Reply-To: <20160805183501.11993-1-eu@felipetonello.com>
This refactor results in a cleaner state machine code and promotes
consistency, readability, and maintanability of this driver.
This refactor state machine was well tested and it is currently running in
production code and devices.
Signed-off-by: Felipe F. Tonello <eu@felipetonello.com>
---
drivers/usb/gadget/function/f_midi.c | 204 ++++++++++++++++++++++-------------
1 file changed, 129 insertions(+), 75 deletions(-)
diff --git a/drivers/usb/gadget/function/f_midi.c b/drivers/usb/gadget/function/f_midi.c
index a7b50ac947f8..09d769e18b50 100644
--- a/drivers/usb/gadget/function/f_midi.c
+++ b/drivers/usb/gadget/function/f_midi.c
@@ -51,6 +51,19 @@ static const char f_midi_longname[] = "MIDI Gadget";
*/
#define MAX_PORTS 16
+/* MIDI message states */
+enum {
+ STATE_INITIAL = 0, /* pseudo state */
+ STATE_1PARAM,
+ STATE_2PARAM_1,
+ STATE_2PARAM_2,
+ STATE_SYSEX_0,
+ STATE_SYSEX_1,
+ STATE_SYSEX_2,
+ STATE_REAL_TIME,
+ STATE_FINISHED, /* pseudo state */
+};
+
/*
* This is a gadget, and the IN/OUT naming is from the host's perspective.
* USB -> OUT endpoint -> rawmidi
@@ -61,13 +74,6 @@ struct gmidi_in_port {
int active;
uint8_t cable;
uint8_t state;
-#define STATE_UNKNOWN 0
-#define STATE_1PARAM 1
-#define STATE_2PARAM_1 2
-#define STATE_2PARAM_2 3
-#define STATE_SYSEX_0 4
-#define STATE_SYSEX_1 5
-#define STATE_SYSEX_2 6
uint8_t data[2];
};
@@ -403,118 +409,166 @@ static int f_midi_snd_free(struct snd_device *device)
return 0;
}
-static void f_midi_transmit_packet(struct usb_request *req, uint8_t p0,
- uint8_t p1, uint8_t p2, uint8_t p3)
-{
- unsigned length = req->length;
- u8 *buf = (u8 *)req->buf + length;
-
- buf[0] = p0;
- buf[1] = p1;
- buf[2] = p2;
- buf[3] = p3;
- req->length = length + 4;
-}
-
/*
* Converts MIDI commands to USB MIDI packets.
*/
static void f_midi_transmit_byte(struct usb_request *req,
struct gmidi_in_port *port, uint8_t b)
{
- uint8_t p0 = port->cable << 4;
+ uint8_t p[4] = { port->cable << 4, 0, 0, 0 };
+ uint8_t next_state = STATE_INITIAL;
+
+ switch (b) {
+ case 0xf8 ... 0xff:
+ /* System Real-Time Messages */
+ p[0] |= 0x0f;
+ p[1] = b;
+ next_state = port->state;
+ port->state = STATE_REAL_TIME;
+ break;
+
+ case 0xf7:
+ /* End of SysEx */
+ switch (port->state) {
+ case STATE_SYSEX_0:
+ p[0] |= 0x05;
+ p[1] = 0xf7;
+ next_state = STATE_FINISHED;
+ break;
+ case STATE_SYSEX_1:
+ p[0] |= 0x06;
+ p[1] = port->data[0];
+ p[2] = 0xf7;
+ next_state = STATE_FINISHED;
+ break;
+ case STATE_SYSEX_2:
+ p[0] |= 0x07;
+ p[1] = port->data[0];
+ p[2] = port->data[1];
+ p[3] = 0xf7;
+ next_state = STATE_FINISHED;
+ break;
+ default:
+ /* Ignore byte */
+ next_state = port->state;
+ port->state = STATE_INITIAL;
+ }
+ break;
- if (b >= 0xf8) {
- f_midi_transmit_packet(req, p0 | 0x0f, b, 0, 0);
- } else if (b >= 0xf0) {
+ case 0xf0 ... 0xf6:
+ /* System Common Messages */
+ port->data[0] = port->data[1] = 0;
+ port->state = STATE_INITIAL;
switch (b) {
case 0xf0:
port->data[0] = b;
- port->state = STATE_SYSEX_1;
+ port->data[1] = 0;
+ next_state = STATE_SYSEX_1;
break;
case 0xf1:
case 0xf3:
port->data[0] = b;
- port->state = STATE_1PARAM;
+ next_state = STATE_1PARAM;
break;
case 0xf2:
port->data[0] = b;
- port->state = STATE_2PARAM_1;
+ next_state = STATE_2PARAM_1;
break;
case 0xf4:
case 0xf5:
- port->state = STATE_UNKNOWN;
+ next_state = STATE_INITIAL;
break;
case 0xf6:
- f_midi_transmit_packet(req, p0 | 0x05, 0xf6, 0, 0);
- port->state = STATE_UNKNOWN;
- break;
- case 0xf7:
- switch (port->state) {
- case STATE_SYSEX_0:
- f_midi_transmit_packet(req,
- p0 | 0x05, 0xf7, 0, 0);
- break;
- case STATE_SYSEX_1:
- f_midi_transmit_packet(req,
- p0 | 0x06, port->data[0], 0xf7, 0);
- break;
- case STATE_SYSEX_2:
- f_midi_transmit_packet(req,
- p0 | 0x07, port->data[0],
- port->data[1], 0xf7);
- break;
- }
- port->state = STATE_UNKNOWN;
+ p[0] |= 0x05;
+ p[1] = 0xf6;
+ next_state = STATE_FINISHED;
break;
}
- } else if (b >= 0x80) {
+ break;
+
+ case 0x80 ... 0xef:
+ /*
+ * Channel Voice Messages, Channel Mode Messages
+ * and Control Change Messages.
+ */
port->data[0] = b;
+ port->data[1] = 0;
+ port->state = STATE_INITIAL;
if (b >= 0xc0 && b <= 0xdf)
- port->state = STATE_1PARAM;
+ next_state = STATE_1PARAM;
else
- port->state = STATE_2PARAM_1;
- } else { /* b < 0x80 */
+ next_state = STATE_2PARAM_1;
+ break;
+
+ case 0x00 ... 0x7f:
+ /* Message parameters */
switch (port->state) {
case STATE_1PARAM:
- if (port->data[0] < 0xf0) {
- p0 |= port->data[0] >> 4;
- } else {
- p0 |= 0x02;
- port->state = STATE_UNKNOWN;
- }
- f_midi_transmit_packet(req, p0, port->data[0], b, 0);
+ if (port->data[0] < 0xf0)
+ p[0] |= port->data[0] >> 4;
+ else
+ p[0] |= 0x02;
+
+ p[1] = port->data[0];
+ p[2] = b;
+ /* This is to allow Running State Messages */
+ next_state = STATE_1PARAM;
break;
case STATE_2PARAM_1:
port->data[1] = b;
- port->state = STATE_2PARAM_2;
+ next_state = STATE_2PARAM_2;
break;
case STATE_2PARAM_2:
- if (port->data[0] < 0xf0) {
- p0 |= port->data[0] >> 4;
- port->state = STATE_2PARAM_1;
- } else {
- p0 |= 0x03;
- port->state = STATE_UNKNOWN;
- }
- f_midi_transmit_packet(req,
- p0, port->data[0], port->data[1], b);
+ if (port->data[0] < 0xf0)
+ p[0] |= port->data[0] >> 4;
+ else
+ p[0] |= 0x03;
+
+ p[1] = port->data[0];
+ p[2] = port->data[1];
+ p[3] = b;
+ /* This is to allow Running State Messages */
+ next_state = STATE_2PARAM_1;
break;
case STATE_SYSEX_0:
port->data[0] = b;
- port->state = STATE_SYSEX_1;
+ next_state = STATE_SYSEX_1;
break;
case STATE_SYSEX_1:
port->data[1] = b;
- port->state = STATE_SYSEX_2;
+ next_state = STATE_SYSEX_2;
break;
case STATE_SYSEX_2:
- f_midi_transmit_packet(req,
- p0 | 0x04, port->data[0], port->data[1], b);
- port->state = STATE_SYSEX_0;
+ p[0] |= 0x04;
+ p[1] = port->data[0];
+ p[2] = port->data[1];
+ p[3] = b;
+ next_state = STATE_SYSEX_0;
break;
}
+ break;
+ }
+
+ /* States where we have to write into the USB request */
+ if (next_state == STATE_FINISHED ||
+ port->state == STATE_SYSEX_2 ||
+ port->state == STATE_1PARAM ||
+ port->state == STATE_2PARAM_2 ||
+ port->state == STATE_REAL_TIME) {
+
+ unsigned int length = req->length;
+ u8 *buf = (u8 *)req->buf + length;
+
+ memcpy(buf, p, sizeof(p));
+ req->length = length + sizeof(p);
+
+ if (next_state == STATE_FINISHED) {
+ next_state = STATE_INITIAL;
+ port->data[0] = port->data[1] = 0;
+ }
}
+
+ port->state = next_state;
}
static void f_midi_drop_out_substreams(struct f_midi *midi)
@@ -641,7 +695,7 @@ static int f_midi_in_open(struct snd_rawmidi_substream *substream)
VDBG(midi, "%s()\n", __func__);
port = midi->in_ports_array + substream->number;
port->substream = substream;
- port->state = STATE_UNKNOWN;
+ port->state = STATE_INITIAL;
return 0;
}
--
2.9.0
next prev parent reply other threads:[~2016-08-05 18:40 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-05 18:34 [PATCH v3 0/9] Gadget endpoint request allocation and MIDI Felipe F. Tonello
2016-08-05 18:34 ` [PATCH v3 1/9] usb: gadget: fix usb_ep_align_maybe endianness and new usb_ep_align Felipe F. Tonello
2016-08-06 2:03 ` Michal Nazarewicz
2016-08-05 18:34 ` [PATCH v3 2/9] usb: gadget: align buffer size when allocating for OUT endpoint Felipe F. Tonello
2016-08-05 19:15 ` kbuild test robot
2016-08-08 17:09 ` Felipe Ferreri Tonello
2016-08-05 18:34 ` [PATCH v3 3/9] usb: gadget: f_midi: remove alignment code " Felipe F. Tonello
2016-08-05 18:34 ` [PATCH v3 4/9] usb: gadget: f_midi: defaults buflen sizes to 512 Felipe F. Tonello
2016-08-06 2:04 ` Michal Nazarewicz
2016-08-05 18:34 ` Felipe F. Tonello [this message]
2016-08-05 18:34 ` [PATCH v3 6/9] usb: gadget: f_midi: drop substreams when disabling endpoint Felipe F. Tonello
2016-08-05 18:34 ` [PATCH v3 7/9] usb: gadget: remove useless parameter in alloc_ep_req() Felipe F. Tonello
2016-08-05 18:35 ` [PATCH v3 8/9] usb: gadget: f_hid: use free_ep_req() Felipe F. Tonello
2016-08-05 18:35 ` [PATCH v3 9/9] usb: gadget: f_hid: use alloc_ep_req() Felipe F. Tonello
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160805183501.11993-6-eu@felipetonello.com \
--to=eu@felipetonello.com \
--cc=balbi@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mina86@mina86.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox