[PATCH v2] drm/vc4: Fix sleeps during the IRQ handler for DSI transactions.

[PATCH v2] drm/vc4: Fix sleeps during the IRQ handler for DSI transactions.

[Eric Anholt]

VC4's DSI1 has a bug where the AXI connection is broken for 32-bit
writes from the CPU, so we use the DMA engine to DMA 32-bit values
into registers instead.  That sleeps, so we can't do it from the top
half.

As a solution, use an interrupt thread so that all our writes happen
when sleeping is is allowed.

v2: Use IRQF_ONESHOT (suggested by Boris)

Signed-off-by: Eric Anholt <eric@anholt.net>
---

Boris, that cleanup ended up working and it looks great.  Thanks!

 drivers/gpu/drm/vc4/vc4_dsi.c | 31 +++++++++++++++++++++++++++++--
 1 file changed, 29 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c
index 554605af344e..3b74fda5662d 100644
--- a/drivers/gpu/drm/vc4/vc4_dsi.c
+++ b/drivers/gpu/drm/vc4/vc4_dsi.c
@@ -1360,6 +1360,25 @@ static void dsi_handle_error(struct vc4_dsi *dsi,
 	*ret = IRQ_HANDLED;
 }
 
+/* Initial handler for port 1 where we need the reg_dma workaround.
+ * The register DMA writes sleep, so we can't do it in the top half.
+ * Instead we use IRQF_ONESHOT so that the IRQ gets disabled in the
+ * parent interrupt contrller until our interrupt thread is done.
+ */
+static irqreturn_t vc4_dsi_irq_defer_to_thread_handler(int irq, void *data)
+{
+	struct vc4_dsi *dsi = data;
+	u32 stat = DSI_PORT_READ(INT_STAT);
+
+	if (!stat)
+		return IRQ_NONE;
+
+	return IRQ_WAKE_THREAD;
+}
+
+/* Normal IRQ handler for port 0, or the threaded IRQ handler for port
+ * 1 where we need the reg_dma workaround.
+ */
 static irqreturn_t vc4_dsi_irq_handler(int irq, void *data)
 {
 	struct vc4_dsi *dsi = data;
@@ -1539,8 +1558,16 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
 	/* Clear any existing interrupt state. */
 	DSI_PORT_WRITE(INT_STAT, DSI_PORT_READ(INT_STAT));
 
-	ret = devm_request_irq(dev, platform_get_irq(pdev, 0),
-			       vc4_dsi_irq_handler, 0, "vc4 dsi", dsi);
+	if (dsi->reg_dma_mem) {
+		ret = devm_request_threaded_irq(dev, platform_get_irq(pdev, 0),
+						vc4_dsi_irq_defer_to_thread_handler,
+						vc4_dsi_irq_handler,
+						IRQF_ONESHOT,
+						"vc4 dsi", dsi);
+	} else {
+		ret = devm_request_irq(dev, platform_get_irq(pdev, 0),
+				       vc4_dsi_irq_handler, 0, "vc4 dsi", dsi);
+	}
 	if (ret) {
 		if (ret != -EPROBE_DEFER)
 			dev_err(dev, "Failed to get interrupt: %d\n", ret);
-- 
2.14.2

Re: [PATCH v2] drm/vc4: Fix sleeps during the IRQ handler for DSI transactions.

[Paul Menzel]

[-- Attachment #1: Type: text/plain, Size: 3373 bytes --]

Dear Eric,


Some nit picks where stuff contradicts the coding style.

Am Freitag, den 13.10.2017, 17:12 -0700 schrieb Eric Anholt:
> VC4's DSI1 has a bug where the AXI connection is broken for 32-bit
> writes from the CPU, so we use the DMA engine to DMA 32-bit values
> into registers instead.  That sleeps, so we can't do it from the top
> half.
> 
> As a solution, use an interrupt thread so that all our writes happen
> when sleeping is is allowed.
> 
> v2: Use IRQF_ONESHOT (suggested by Boris)
> 
> Signed-off-by: Eric Anholt <eric@anholt.net>
> ---
> 
> Boris, that cleanup ended up working and it looks great.  Thanks!
> 
>  drivers/gpu/drm/vc4/vc4_dsi.c | 31 +++++++++++++++++++++++++++++--
>  1 file changed, 29 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c
> index 554605af344e..3b74fda5662d 100644
> --- a/drivers/gpu/drm/vc4/vc4_dsi.c
> +++ b/drivers/gpu/drm/vc4/vc4_dsi.c
> @@ -1360,6 +1360,25 @@ static void dsi_handle_error(struct vc4_dsi *dsi,
>  	*ret = IRQ_HANDLED;
>  }
>  
> +/* Initial handler for port 1 where we need the reg_dma workaround.
> + * The register DMA writes sleep, so we can't do it in the top half.
> + * Instead we use IRQF_ONESHOT so that the IRQ gets disabled in the
> + * parent interrupt contrller until our interrupt thread is done.
> + */

There should be a “blank comment line” at the beginning [1].

> The preferred style for long (multi-line) comments is:
> 
> /*
>  * This is the preferred style for multi-line
>  * comments in the Linux kernel source code.
>  * Please use it consistently.
>  *
>  * Description:  A column of asterisks on the left side,
>  * with beginning and ending almost-blank lines.
>  */

> +static irqreturn_t vc4_dsi_irq_defer_to_thread_handler(int irq, void *data)
> +{
> +	struct vc4_dsi *dsi = data;
> +	u32 stat = DSI_PORT_READ(INT_STAT);
> +
> +	if (!stat)
> +		return IRQ_NONE;
> +
> +	return IRQ_WAKE_THREAD;
> +}
> +
> +/* Normal IRQ handler for port 0, or the threaded IRQ handler for port
> + * 1 where we need the reg_dma workaround.
> + */
>  static irqreturn_t vc4_dsi_irq_handler(int irq, void *data)
>  {
>  	struct vc4_dsi *dsi = data;
> @@ -1539,8 +1558,16 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
>  	/* Clear any existing interrupt state. */
>  	DSI_PORT_WRITE(INT_STAT, DSI_PORT_READ(INT_STAT));
>  
> -	ret = devm_request_irq(dev, platform_get_irq(pdev, 0),
> -			       vc4_dsi_irq_handler, 0, "vc4 dsi", dsi);
> +	if (dsi->reg_dma_mem) {
> +		ret = devm_request_threaded_irq(dev, platform_get_irq(pdev, 0),
> +						vc4_dsi_irq_defer_to_thread_handler,
> +						vc4_dsi_irq_handler,
> +						IRQF_ONESHOT,
> +						"vc4 dsi", dsi);
> +	} else {
> +		ret = devm_request_irq(dev, platform_get_irq(pdev, 0),
> +				       vc4_dsi_irq_handler, 0, "vc4 dsi", dsi);
> +	}

The braces should be removed [2].

> Do not unnecessarily use braces where a single statement will do.

>  	if (ret) {
>  		if (ret != -EPROBE_DEFER)
>  			dev_err(dev, "Failed to get interrupt: %d\n", ret);


Thanks,

Paul


[1] https://www.kernel.org/doc/html/v4.13/process/coding-style.html#commenting
[2] https://www.kernel.org/doc/html/v4.13/process/coding-style.html#placing-braces-and-spaces

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH v2] drm/vc4: Fix sleeps during the IRQ handler for DSI transactions.

[Boris Brezillon]

On Fri, 13 Oct 2017 17:12:55 -0700
Eric Anholt <eric@anholt.net> wrote:

> VC4's DSI1 has a bug where the AXI connection is broken for 32-bit
> writes from the CPU, so we use the DMA engine to DMA 32-bit values
> into registers instead.  That sleeps, so we can't do it from the top
> half.
> 
> As a solution, use an interrupt thread so that all our writes happen
> when sleeping is is allowed.
> 
> v2: Use IRQF_ONESHOT (suggested by Boris)
> 
> Signed-off-by: Eric Anholt <eric@anholt.net>

Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>

> ---
> 
> Boris, that cleanup ended up working and it looks great.  Thanks!
> 
>  drivers/gpu/drm/vc4/vc4_dsi.c | 31 +++++++++++++++++++++++++++++--
>  1 file changed, 29 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c
> index 554605af344e..3b74fda5662d 100644
> --- a/drivers/gpu/drm/vc4/vc4_dsi.c
> +++ b/drivers/gpu/drm/vc4/vc4_dsi.c
> @@ -1360,6 +1360,25 @@ static void dsi_handle_error(struct vc4_dsi *dsi,
>  	*ret = IRQ_HANDLED;
>  }
>  
> +/* Initial handler for port 1 where we need the reg_dma workaround.
> + * The register DMA writes sleep, so we can't do it in the top half.
> + * Instead we use IRQF_ONESHOT so that the IRQ gets disabled in the
> + * parent interrupt contrller until our interrupt thread is done.
> + */
> +static irqreturn_t vc4_dsi_irq_defer_to_thread_handler(int irq, void *data)
> +{
> +	struct vc4_dsi *dsi = data;
> +	u32 stat = DSI_PORT_READ(INT_STAT);
> +
> +	if (!stat)
> +		return IRQ_NONE;
> +
> +	return IRQ_WAKE_THREAD;
> +}
> +
> +/* Normal IRQ handler for port 0, or the threaded IRQ handler for port
> + * 1 where we need the reg_dma workaround.
> + */
>  static irqreturn_t vc4_dsi_irq_handler(int irq, void *data)
>  {
>  	struct vc4_dsi *dsi = data;
> @@ -1539,8 +1558,16 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
>  	/* Clear any existing interrupt state. */
>  	DSI_PORT_WRITE(INT_STAT, DSI_PORT_READ(INT_STAT));
>  
> -	ret = devm_request_irq(dev, platform_get_irq(pdev, 0),
> -			       vc4_dsi_irq_handler, 0, "vc4 dsi", dsi);
> +	if (dsi->reg_dma_mem) {
> +		ret = devm_request_threaded_irq(dev, platform_get_irq(pdev, 0),
> +						vc4_dsi_irq_defer_to_thread_handler,
> +						vc4_dsi_irq_handler,
> +						IRQF_ONESHOT,
> +						"vc4 dsi", dsi);
> +	} else {
> +		ret = devm_request_irq(dev, platform_get_irq(pdev, 0),
> +				       vc4_dsi_irq_handler, 0, "vc4 dsi", dsi);
> +	}
>  	if (ret) {
>  		if (ret != -EPROBE_DEFER)
>  			dev_err(dev, "Failed to get interrupt: %d\n", ret);