* [PATCH 1/9] staging: rtl8192u: change block comments to prefered style - Coding Style
2018-06-19 19:55 v1 Coding style changes John Whitmore
@ 2018-06-19 19:55 ` John Whitmore
2018-06-19 19:55 ` [PATCH 2/9] staging: rtl8192u: Correct indentation of switch statement " John Whitmore
` (7 subsequent siblings)
8 siblings, 0 replies; 14+ messages in thread
From: John Whitmore @ 2018-06-19 19:55 UTC (permalink / raw)
To: gregkh; +Cc: devel, linux-kernel, John Whitmore
Some of the comment blocks are commening out code so have been left for the moment.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
---
.../rtl8192u/ieee80211/rtl819x_HTProc.c | 366 ++++++++++--------
1 file changed, 195 insertions(+), 171 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index 5a48693e2cf3..54c48747f5fa 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -41,17 +41,18 @@ static u8 EDIMAX_RALINK[3] = {0x00, 0x0e, 0x2e};
static u8 AIRLINK_RALINK[3] = {0x00, 0x18, 0x02};
//static u8 DLINK_ATHEROS[3] = {0x00, 0x1c, 0xf0};
static u8 CISCO_BROADCOM[3] = {0x00, 0x17, 0x94};
-
-// 2008/04/01 MH For Cisco G mode RX TP We need to change FW duration. Should we put the
-// code in other place??
-//static u8 WIFI_CISCO_G_AP[3] = {0x00, 0x40, 0x96};
-/********************************************************************************************************************
+/*
+ * 2008/04/01 MH For Cisco G mode RX TP We need to change FW duration. Should we put the
+ * code in other place??
+ * static u8 WIFI_CISCO_G_AP[3] = {0x00, 0x40, 0x96};
+ */
+/*
*function: This function update default settings in pHTInfo structure
* input: PRT_HIGH_THROUGHPUT pHTInfo
* output: none
* return: none
* notice: These value need be modified if any changes.
- * *****************************************************************************************************************/
+ */
void HTUpdateDefaultSetting(struct ieee80211_device *ieee)
{
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
@@ -93,8 +94,10 @@ void HTUpdateDefaultSetting(struct ieee80211_device *ieee)
// 8190 only. Assign duration operation mode to firmware
pMgntInfo->bTxEnableFwCalcDur = (BOOLEAN)pNdisCommon->bRegTxEnableFwCalcDur;
#endif
- // 8190 only, Realtek proprietary aggregation mode
- // Set MPDUDensity=2, 1: Set MPDUDensity=2(32k) for Realtek AP and set MPDUDensity=0(8k) for others
+ /*
+ * 8190 only, Realtek proprietary aggregation mode
+ * Set MPDUDensity=2, 1: Set MPDUDensity=2(32k) for Realtek AP and set MPDUDensity=0(8k) for others
+ */
pHTInfo->bRegRT2RTAggregation = 1;//0: Set MPDUDensity=2, 1: Set MPDUDensity=2(32k) for Realtek AP and set MPDUDensity=0(8k) for others
// For Rx Reorder Control
@@ -113,14 +116,14 @@ void HTUpdateDefaultSetting(struct ieee80211_device *ieee)
#endif
}
-/********************************************************************************************************************
+/*
*function: This function print out each field on HT capability IE mainly from (Beacon/ProbeRsp/AssocReq)
* input: u8* CapIE //Capability IE to be printed out
* u8* TitleString //mainly print out caller function
* output: none
* return: none
* notice: Driver should not print out this message by default.
- * *****************************************************************************************************************/
+ */
void HTDebugHTCapability(u8 *CapIE, u8 *TitleString)
{
static u8 EWC11NHTCap[] = {0x00, 0x90, 0x4c, 0x33}; // For 11n EWC definition, 2007.07.17, by Emily
@@ -147,14 +150,14 @@ void HTDebugHTCapability(u8 *CapIE, u8 *TitleString)
pCapELE->MCS[1], pCapELE->MCS[2], pCapELE->MCS[3], pCapELE->MCS[4]);
}
-/********************************************************************************************************************
+/*
*function: This function print out each field on HT Information IE mainly from (Beacon/ProbeRsp)
* input: u8* InfoIE //Capability IE to be printed out
* u8* TitleString //mainly print out caller function
* output: none
* return: none
* notice: Driver should not print out this message by default.
- * *****************************************************************************************************************/
+ */
void HTDebugHTInfo(u8 *InfoIE, u8 *TitleString)
{
static u8 EWC11NHTInfo[] = {0x00, 0x90, 0x4c, 0x34}; // For 11n EWC definition, 2007.07.17, by Emily
@@ -209,8 +212,8 @@ void HTDebugHTInfo(u8 *InfoIE, u8 *TitleString)
}
/*
-* Return: true if station in half n mode and AP supports 40 bw
-*/
+ * Return: true if station in half n mode and AP supports 40 bw
+ */
static bool IsHTHalfNmode40Bandwidth(struct ieee80211_device *ieee)
{
bool retValue = false;
@@ -276,14 +279,14 @@ u16 HTMcsToDataRate(struct ieee80211_device *ieee, u8 nMcsRate)
return MCS_DATA_RATE[is40MHz][isShortGI][(nMcsRate & 0x7f)];
}
-/********************************************************************************************************************
+/*
*function: This function returns current datarate.
* input: struct ieee80211_device* ieee
* u8 nDataRate
* output: none
* return: tx rate
* notice: quite unsure about how to use this function //wb
- * *****************************************************************************************************************/
+ */
u16 TxCountToDataRate(struct ieee80211_device *ieee, u8 nDataRate)
{
//PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
@@ -345,13 +348,13 @@ bool IsHTHalfNmodeAPs(struct ieee80211_device *ieee)
return retValue;
}
-/********************************************************************************************************************
+/*
*function: This function returns peer IOT.
* input: struct ieee80211_device* ieee
* output: none
* return:
* notice:
- * *****************************************************************************************************************/
+ */
static void HTIOTPeerDetermine(struct ieee80211_device *ieee)
{
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
@@ -383,31 +386,31 @@ static void HTIOTPeerDetermine(struct ieee80211_device *ieee)
IEEE80211_DEBUG(IEEE80211_DL_IOT, "Joseph debug!! IOTPEER: %x\n", pHTInfo->IOTPeer);
}
-/********************************************************************************************************************
+/*
*function: Check whether driver should declare received rate up to MCS13 only since some chipset is not good
* at receiving MCS14~15 frame from some AP.
* input: struct ieee80211_device* ieee
* u8 * PeerMacAddr
* output: none
* return: return 1 if driver should declare MCS13 only(otherwise return 0)
- * *****************************************************************************************************************/
+ */
static u8 HTIOTActIsDisableMCS14(struct ieee80211_device *ieee, u8 *PeerMacAddr)
{
return 0;
}
-/**
-* Function: HTIOTActIsDisableMCS15
-*
-* Overview: Check whether driver should declare capability of receiving MCS15
-*
-* Input:
-* PADAPTER Adapter,
-*
-* Output: None
-* Return: true if driver should disable MCS15
-* 2008.04.15 Emily
-*/
+/*
+ * Function: HTIOTActIsDisableMCS15
+ *
+ * Overview: Check whether driver should declare capability of receiving MCS15
+ *
+ * Input:
+ * PADAPTER Adapter,
+ *
+ * Output: None
+ * Return: true if driver should disable MCS15
+ * 2008.04.15 Emily
+ */
static bool HTIOTActIsDisableMCS15(struct ieee80211_device *ieee)
{
bool retValue = false;
@@ -433,18 +436,18 @@ static bool HTIOTActIsDisableMCS15(struct ieee80211_device *ieee)
return retValue;
}
-/**
-* Function: HTIOTActIsDisableMCSTwoSpatialStream
-*
-* Overview: Check whether driver should declare capability of receiving All 2 ss packets
-*
-* Input:
-* PADAPTER Adapter,
-*
-* Output: None
-* Return: true if driver should disable all two spatial stream packet
-* 2008.04.21 Emily
-*/
+/*
+ * Function: HTIOTActIsDisableMCSTwoSpatialStream
+ *
+ * Overview: Check whether driver should declare capability of receiving All 2 ss packets
+ *
+ * Input:
+ * PADAPTER Adapter,
+ *
+ * Output: None
+ * Return: true if driver should disable all two spatial stream packet
+ * 2008.04.21 Emily
+ */
static bool HTIOTActIsDisableMCSTwoSpatialStream(struct ieee80211_device *ieee,
u8 *PeerMacAddr)
{
@@ -454,25 +457,25 @@ static bool HTIOTActIsDisableMCSTwoSpatialStream(struct ieee80211_device *ieee,
return false;
}
-/********************************************************************************************************************
+/*
*function: Check whether driver should disable EDCA turbo mode
* input: struct ieee80211_device* ieee
* u8* PeerMacAddr
* output: none
* return: return 1 if driver should disable EDCA turbo mode(otherwise return 0)
- * *****************************************************************************************************************/
+ */
static u8 HTIOTActIsDisableEDCATurbo(struct ieee80211_device *ieee,
u8 *PeerMacAddr)
{ /* default enable EDCA Turbo mode. */
return false;
}
-/********************************************************************************************************************
+/*
*function: Check whether we need to use OFDM to sned MGNT frame for broadcom AP
* input: struct ieee80211_network *network //current network we live
* output: none
* return: return 1 if true
- * *****************************************************************************************************************/
+ */
static u8 HTIOTActIsMgntUseCCK6M(struct ieee80211_network *network)
{
u8 retValue = 0;
@@ -504,7 +507,7 @@ void HTResetIOTSetting(PRT_HIGH_THROUGHPUT pHTInfo)
pHTInfo->IOTPeer = HT_IOT_PEER_UNKNOWN;
}
-/********************************************************************************************************************
+/*
*function: Construct Capablility Element in Beacon... if HTEnable is turned on
* input: struct ieee80211_device* ieee
* u8* posHTCap //pointer to store Capability Ele
@@ -513,7 +516,7 @@ void HTResetIOTSetting(PRT_HIGH_THROUGHPUT pHTInfo)
* output: none
* return: none
* notice: posHTCap can't be null and should be initialized before.
- * *****************************************************************************************************************/
+ */
void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u8 *len, u8 IsEncrypt)
{
PRT_HIGH_THROUGHPUT pHT = ieee->pHTInfo;
@@ -557,8 +560,10 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
pCapELE->PSMP = 0; // Do not support now!!
pCapELE->LSigTxopProtect = 0; // Do not support now!!
- //MAC HT parameters info
- // TODO: Nedd to take care of this part
+ /*
+ * MAC HT parameters info
+ * TODO: Nedd to take care of this part
+ */
IEEE80211_DEBUG(IEEE80211_DL_HT, "TX HT cap/info ele BW=%d MaxAMSDUSize:%d DssCCk:%d\n", pCapELE->ChlWidth, pCapELE->MaxAMSDUSize, pCapELE->DssCCk);
if (IsEncrypt) {
@@ -580,8 +585,10 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
if (pHT->IOTAction & HT_IOT_ACT_DISABLE_ALL_2SS)
pCapELE->MCS[1] &= 0x00;
- // 2008.06.12
- // For RTL819X, if pairwisekey = wep/tkip, ap is ralink, we support only MCS0~7.
+ /*
+ * 2008.06.12
+ * For RTL819X, if pairwisekey = wep/tkip, ap is ralink, we support only MCS0~7.
+ */
if (ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev)) {
int i;
@@ -609,7 +616,7 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
// HTDebugHTCapability(posHTCap, (u8*)"HTConstructCapability()");
}
-/********************************************************************************************************************
+/*
*function: Construct Information Element in Beacon... if HTEnable is turned on
* input: struct ieee80211_device* ieee
* u8* posHTCap //pointer to store Information Ele
@@ -618,7 +625,7 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
* output: none
* return: none
* notice: posHTCap can't be null and be initialized before. only AP and IBSS sta should do this
- * *****************************************************************************************************************/
+ */
void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *len, u8 IsEncrypt)
{
PRT_HIGH_THROUGHPUT pHT = ieee->pHTInfo;
@@ -659,24 +666,24 @@ void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *le
}
/*
- * According to experiment, Realtek AP to STA (based on rtl8190) may achieve best performance
- * if both STA and AP set limitation of aggregation size to 32K, that is, set AMPDU density to 2
- * (Ref: IEEE 11n specification). However, if Realtek STA associates to other AP, STA should set
- * limitation of aggregation size to 8K, otherwise, performance of traffic stream from STA to AP
- * will be much less than the traffic stream from AP to STA if both of the stream runs concurrently
- * at the same time.
- *
- * Frame Format
- * Element ID Length OUI Type1 Reserved
- * 1 byte 1 byte 3 bytes 1 byte 1 byte
- *
- * OUI = 0x00, 0xe0, 0x4c,
- * Type = 0x02
- * Reserved = 0x00
- *
- * 2007.8.21 by Emily
-*/
-/********************************************************************************************************************
+ * According to experiment, Realtek AP to STA (based on rtl8190) may achieve best performance
+ * if both STA and AP set limitation of aggregation size to 32K, that is, set AMPDU density to 2
+ * (Ref: IEEE 11n specification). However, if Realtek STA associates to other AP, STA should set
+ * limitation of aggregation size to 8K, otherwise, performance of traffic stream from STA to AP
+ * will be much less than the traffic stream from AP to STA if both of the stream runs concurrently
+ * at the same time.
+ *
+ * Frame Format
+ * Element ID Length OUI Type1 Reserved
+ * 1 byte 1 byte 3 bytes 1 byte 1 byte
+ *
+ * OUI = 0x00, 0xe0, 0x4c,
+ * Type = 0x02
+ * Reserved = 0x00
+ *
+ * 2007.8.21 by Emily
+ */
+/*
*function: Construct Information Element in Beacon... in RT2RT condition
* input: struct ieee80211_device* ieee
* u8* posRT2RTAgg //pointer to store Information Ele
@@ -684,7 +691,7 @@ void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *le
* output: none
* return: none
* notice:
- * *****************************************************************************************************************/
+ */
void HTConstructRT2RTAggElement(struct ieee80211_device *ieee, u8 *posRT2RTAgg, u8 *len)
{
if (!posRT2RTAgg) {
@@ -726,13 +733,13 @@ void HTConstructRT2RTAggElement(struct ieee80211_device *ieee, u8 *posRT2RTAgg,
#endif
}
-/********************************************************************************************************************
+/*
*function: Pick the right Rate Adaptive table to use
* input: struct ieee80211_device* ieee
* u8* pOperateMCS //A pointer to MCS rate bitmap
* return: always we return true
* notice:
- * *****************************************************************************************************************/
+ */
static u8 HT_PickMCSRate(struct ieee80211_device *ieee, u8 *pOperateMCS)
{
u8 i;
@@ -774,24 +781,24 @@ static u8 HT_PickMCSRate(struct ieee80211_device *ieee, u8 *pOperateMCS)
}
/*
-* Description:
-* This function will get the highest speed rate in input MCS set.
-*
-* /param Adapter Pionter to Adapter entity
-* pMCSRateSet Pointer to MCS rate bitmap
-* pMCSFilter Pointer to MCS rate filter
-*
-* /return Highest MCS rate included in pMCSRateSet and filtered by pMCSFilter.
-*
-*/
-/********************************************************************************************************************
+ * Description:
+ * This function will get the highest speed rate in input MCS set.
+ *
+ * /param Adapter Pionter to Adapter entity
+ * pMCSRateSet Pointer to MCS rate bitmap
+ * pMCSFilter Pointer to MCS rate filter
+ *
+ * /return Highest MCS rate included in pMCSRateSet and filtered by pMCSFilter.
+ *
+ */
+/*
*function: This function will get the highest speed rate in input MCS set.
* input: struct ieee80211_device* ieee
* u8* pMCSRateSet //Pointer to MCS rate bitmap
* u8* pMCSFilter //Pointer to MCS rate filter
* return: Highest MCS rate included in pMCSRateSet and filtered by pMCSFilter
* notice:
- * *****************************************************************************************************************/
+ */
u8 HTGetHighestMCSRate(struct ieee80211_device *ieee, u8 *pMCSRateSet, u8 *pMCSFilter)
{
u8 i, j;
@@ -829,14 +836,13 @@ u8 HTGetHighestMCSRate(struct ieee80211_device *ieee, u8 *pMCSRateSet, u8 *pMCSF
}
/*
-**
-**1.Filter our operation rate set with AP's rate set
-**2.shall reference channel bandwidth, STBC, Antenna number
-**3.generate rate adative table for firmware
-**David 20060906
-**
-** \pHTSupportedCap: the connected STA's supported rate Capability element
-*/
+ * 1.Filter our operation rate set with AP's rate set
+ * 2.shall reference channel bandwidth, STBC, Antenna number
+ * 3.generate rate adative table for firmware
+ * David 20060906
+ *
+ * \pHTSupportedCap: the connected STA's supported rate Capability element
+ */
static u8 HTFilterMCSRate(struct ieee80211_device *ieee, u8 *pSupportMCS,
u8 *pOperateMCS)
{
@@ -849,18 +855,20 @@ static u8 HTFilterMCSRate(struct ieee80211_device *ieee, u8 *pSupportMCS,
// TODO: adjust our operational rate set according to our channel bandwidth, STBC and Antenna number
- // TODO: fill suggested rate adaptive rate index and give firmware info using Tx command packet
- // we also shall suggested the first start rate set according to our singal strength
+ /*
+ * TODO: fill suggested rate adaptive rate index and give firmware info using Tx command packet
+ * we also shall suggested the first start rate set according to our singal strength
+ */
HT_PickMCSRate(ieee, pOperateMCS);
// For RTL819X, if pairwisekey = wep/tkip, we support only MCS0~7.
if (ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev))
pOperateMCS[1] = 0;
- //
- // For RTL819X, we support only MCS0~15.
- // And also, we do not know how to use MCS32 now.
- //
+ /*
+ * For RTL819X, we support only MCS0~15.
+ * And also, we do not know how to use MCS32 now.
+ */
for (i = 2; i <= 15; i++)
pOperateMCS[i] = 0;
@@ -911,30 +919,33 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
pHTInfo->bCurTxBW40MHz = (pPeerHTInfo->RecommemdedTxWidth == 1);
- //
- // Update short GI/ long GI setting
- //
- // TODO:
+ /*
+ * Update short GI/ long GI setting
+ *
+ * TODO:
+ */
pHTInfo->bCurShortGI20MHz = pHTInfo->bRegShortGI20MHz &&
(pPeerHTCap->ShortGI20Mhz == 1);
pHTInfo->bCurShortGI40MHz = pHTInfo->bRegShortGI40MHz &&
(pPeerHTCap->ShortGI40Mhz == 1);
- //
- // Config TX STBC setting
- //
- // TODO:
+ /*
+ * Config TX STBC setting
+ *
+ * TODO:
+ */
- //
- // Config DSSS/CCK mode in 40MHz mode
- //
- // TODO:
+ /*
+ * Config DSSS/CCK mode in 40MHz mode
+ *
+ * TODO:
+ */
pHTInfo->bCurSuppCCK = pHTInfo->bRegSuppCCK &&
(pPeerHTCap->DssCCk == 1);
- //
- // Config and configure A-MSDU setting
- //
+ /*
+ * Config and configure A-MSDU setting
+ */
pHTInfo->bCurrent_AMSDU_Support = pHTInfo->bAMSDU_Support;
nMaxAMSDUSize = (pPeerHTCap->MaxAMSDUSize == 0) ? 3839 : 7935;
@@ -943,14 +954,15 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
pHTInfo->nCurrent_AMSDU_MaxSize = nMaxAMSDUSize;
else
pHTInfo->nCurrent_AMSDU_MaxSize = pHTInfo->nAMSDU_MaxSize;
- //
- // Config A-MPDU setting
- //
+ /*
+ * Config A-MPDU setting
+ */
pHTInfo->bCurrentAMPDUEnable = pHTInfo->bAMPDUEnable;
- // <1> Decide AMPDU Factor
-
- // By Emily
+ /*
+ * <1> Decide AMPDU Factor
+ * By Emily
+ */
if (!pHTInfo->bRegRT2RTAggregation) {
// Decide AMPDU Factor according to protocol handshake
if (pHTInfo->AMPDU_Factor > pPeerHTCap->MaxRxAMPDUFactor)
@@ -958,8 +970,10 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
else
pHTInfo->CurrentAMPDUFactor = pHTInfo->AMPDU_Factor;
} else {
- // Set MPDU density to 2 to Realtek AP, and set it to 0 for others
- // Replace MPDU factor declared in original association response frame format. 2007.08.20 by Emily
+ /*
+ * Set MPDU density to 2 to Realtek AP, and set it to 0 for others
+ * Replace MPDU factor declared in original association response frame format. 2007.08.20 by Emily
+ */
if (ieee->current_network.bssht.bdRT2RTAggregation) {
if (ieee->pairwise_key_type != KEY_TYPE_NA)
// Realtek may set 32k in security mode and 64k for others
@@ -974,8 +988,10 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
}
}
- // <2> Set AMPDU Minimum MPDU Start Spacing
- // 802.11n 3.0 section 9.7d.3
+ /*
+ * <2> Set AMPDU Minimum MPDU Start Spacing
+ * 802.11n 3.0 section 9.7d.3
+ */
if (pHTInfo->MPDU_Density > pPeerHTCap->MPDUDensity)
pHTInfo->CurrentMPDUDensity = pHTInfo->MPDU_Density;
else
@@ -997,22 +1013,24 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
// Rx Reorder Setting
pHTInfo->bCurRxReorderEnable = pHTInfo->bRegRxReorderEnable;
- //
- // Filter out unsupported HT rate for this AP
- // Update RATR table
- // This is only for 8190 ,8192 or later product which using firmware to handle rate adaptive mechanism.
- //
+ /*
+ * Filter out unsupported HT rate for this AP
+ * Update RATR table
+ * This is only for 8190 ,8192 or later product which using firmware to handle rate adaptive mechanism.
+ */
- // Handle Ralink AP bad MCS rate set condition. Joseph.
- // This fix the bug of Ralink AP. This may be removed in the future.
+ /*
+ * Handle Ralink AP bad MCS rate set condition. Joseph.
+ * This fix the bug of Ralink AP. This may be removed in the future.
+ */
if (pPeerHTCap->MCS[0] == 0)
pPeerHTCap->MCS[0] = 0xff;
HTFilterMCSRate(ieee, pPeerHTCap->MCS, ieee->dot11HTOperationalRateSet);
- //
- // Config MIMO Power Save setting
- //
+ /*
+ * Config MIMO Power Save setting
+ */
pHTInfo->PeerMimoPs = pPeerHTCap->MimoPwrSave;
if (pHTInfo->PeerMimoPs == MIMO_PS_STATIC)
pMcsFilter = MCS_FILTER_1SS;
@@ -1023,28 +1041,28 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
ieee->HTHighestOperaRate = HTGetHighestMCSRate(ieee, ieee->dot11HTOperationalRateSet, pMcsFilter);
ieee->HTCurrentOperaRate = ieee->HTHighestOperaRate;
- //
- // Config current operation mode.
- //
+ /*
+ * Config current operation mode.
+ */
pHTInfo->CurrentOpMode = pPeerHTInfo->OptMode;
}
void HTSetConnectBwModeCallback(struct ieee80211_device *ieee);
-/********************************************************************************************************************
+/*
*function: initialize HT info(struct PRT_HIGH_THROUGHPUT)
* input: struct ieee80211_device* ieee
* output: none
* return: none
* notice: This function is called when * (1) MPInitialization Phase * (2) Receiving of Deauthentication from AP
-********************************************************************************************************************/
+ */
// TODO: Should this funciton be called when receiving of Disassociation?
void HTInitializeHTInfo(struct ieee80211_device *ieee)
{
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
- //
- // These parameters will be reset when receiving deauthentication packet
- //
+ /*
+ * These parameters will be reset when receiving deauthentication packet
+ */
IEEE80211_DEBUG(IEEE80211_DL_HT, "===========>%s()\n", __func__);
pHTInfo->bCurrentHTSupport = false;
@@ -1057,10 +1075,12 @@ void HTInitializeHTInfo(struct ieee80211_device *ieee)
pHTInfo->bCurShortGI40MHz = false;
pHTInfo->bForcedShortGI = false;
- // CCK rate support
- // This flag is set to true to support CCK rate by default.
- // It will be affected by "pHTInfo->bRegSuppCCK" and AP capabilities only when associate to
- // 11N BSS.
+ /*
+ * CCK rate support
+ * This flag is set to true to support CCK rate by default.
+ * It will be affected by "pHTInfo->bRegSuppCCK" and AP capabilities only when associate to
+ * 11N BSS.
+ */
pHTInfo->bCurSuppCCK = true;
// AMSDU related
@@ -1099,13 +1119,13 @@ void HTInitializeHTInfo(struct ieee80211_device *ieee)
}
}
-/********************************************************************************************************************
+/*
*function: initialize Bss HT structure(struct PBSS_HT)
* input: PBSS_HT pBssHT //to be initialized
* output: none
* return: none
* notice: This function is called when initialize network structure
-********************************************************************************************************************/
+ */
void HTInitializeBssDesc(PBSS_HT pBssHT)
{
pBssHT->bdSupportHT = false;
@@ -1120,14 +1140,14 @@ void HTInitializeBssDesc(PBSS_HT pBssHT)
pBssHT->bdRT2RTLongSlotTime = false;
}
-/********************************************************************************************************************
+/*
*function: initialize Bss HT structure(struct PBSS_HT)
* input: struct ieee80211_device *ieee
* struct ieee80211_network *pNetwork //usually current network we are live in
* output: none
* return: none
* notice: This function should ONLY be called before association
-********************************************************************************************************************/
+ */
void HTResetSelfAndSavePeerSetting(struct ieee80211_device *ieee, struct ieee80211_network *pNetwork)
{
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
@@ -1166,8 +1186,10 @@ void HTResetSelfAndSavePeerSetting(struct ieee80211_device *ieee, struct ieee802
// Determine the IOT Peer Vendor.
HTIOTPeerDetermine(ieee);
- // Decide IOT Action
- // Must be called after the parameter of pHTInfo->bCurrentRT2RTAggregation is decided
+ /*
+ * Decide IOT Action
+ * Must be called after the parameter of pHTInfo->bCurrentRT2RTAggregation is decided
+ */
pHTInfo->IOTAction = 0;
bIOTAction = HTIOTActIsDisableMCS14(ieee, pNetwork->bssid);
if (bIOTAction)
@@ -1208,27 +1230,27 @@ void HTUpdateSelfAndPeerSetting(struct ieee80211_device *ieee, struct ieee80211_
PHT_INFORMATION_ELE pPeerHTInfo = (PHT_INFORMATION_ELE)pNetwork->bssht.bdHTInfoBuf;
if (pHTInfo->bCurrentHTSupport) {
- //
- // Config current operation mode.
- //
+ /*
+ * Config current operation mode.
+ */
if (pNetwork->bssht.bdHTInfoLen != 0)
pHTInfo->CurrentOpMode = pPeerHTInfo->OptMode;
- //
- // <TODO: Config according to OBSS non-HT STA present!!>
- //
+ /*
+ * <TODO: Config according to OBSS non-HT STA present!!>
+ */
}
}
EXPORT_SYMBOL(HTUpdateSelfAndPeerSetting);
-/********************************************************************************************************************
+/*
*function: check whether HT control field exists
* input: struct ieee80211_device *ieee
* u8* pFrame //coming skb->data
* output: none
* return: return true if HT control field exists(false otherwise)
* notice:
-********************************************************************************************************************/
+ */
u8 HTCCheck(struct ieee80211_device *ieee, u8 *pFrame)
{
if (ieee->pHTInfo->bCurrentHTSupport) {
@@ -1240,9 +1262,9 @@ u8 HTCCheck(struct ieee80211_device *ieee, u8 *pFrame)
return false;
}
-//
-// This function set bandwidth mode in protocol layer.
-//
+/*
+ * This function set bandwidth mode in protocol layer.
+ */
void HTSetConnectBwMode(struct ieee80211_device *ieee, HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET Offset)
{
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
@@ -1280,10 +1302,12 @@ void HTSetConnectBwMode(struct ieee80211_device *ieee, HT_CHANNEL_WIDTH Bandwidt
pHTInfo->bSwBwInProgress = true;
- // TODO: 2007.7.13 by Emily Wait 2000ms in order to guarantee that switching
- // bandwidth is executed after scan is finished. It is a temporal solution
- // because software should ganrantee the last operation of switching bandwidth
- // is executed properlly.
+ /*
+ * TODO: 2007.7.13 by Emily Wait 2000ms in order to guarantee that switching
+ * bandwidth is executed after scan is finished. It is a temporal solution
+ * because software should ganrantee the last operation of switching bandwidth
+ * is executed properlly.
+ */
HTSetConnectBwModeCallback(ieee);
// spin_unlock_irqrestore(&(ieee->bw_spinlock), flags);
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH 2/9] staging: rtl8192u: Correct indentation of switch statement - Coding Style
2018-06-19 19:55 v1 Coding style changes John Whitmore
2018-06-19 19:55 ` [PATCH 1/9] staging: rtl8192u: change block comments to prefered style - Coding Style John Whitmore
@ 2018-06-19 19:55 ` John Whitmore
2018-06-19 20:07 ` Andy Shevchenko
2018-06-19 19:55 ` [PATCH 3/9] staging: rtl8192u: Truncate block comments to 80 character length - Style John Whitmore
` (6 subsequent siblings)
8 siblings, 1 reply; 14+ messages in thread
From: John Whitmore @ 2018-06-19 19:55 UTC (permalink / raw)
To: gregkh; +Cc: devel, linux-kernel, John Whitmore
Removed an extra indentation from the code of the various case options in a
switch statement.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
---
.../rtl8192u/ieee80211/rtl819x_HTProc.c | 30 +++++++++----------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index 54c48747f5fa..4bfadb49c363 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -753,28 +753,28 @@ static u8 HT_PickMCSRate(struct ieee80211_device *ieee, u8 *pOperateMCS)
case IEEE_A:
case IEEE_B:
case IEEE_G:
- //legacy rate routine handled at selectedrate
+ //legacy rate routine handled at selectedrate
- //no MCS rate
- for (i = 0; i <= 15; i++)
- pOperateMCS[i] = 0;
- break;
+ //no MCS rate
+ for (i = 0; i <= 15; i++)
+ pOperateMCS[i] = 0;
+ break;
case IEEE_N_24G: //assume CCK rate ok
case IEEE_N_5G:
- // Legacy part we only use 6, 5.5,2,1 for N_24G and 6 for N_5G.
- // Legacy part shall be handled at SelectRateSet().
-
- //HT part
- // TODO: may be different if we have different number of antenna
- pOperateMCS[0] &= RATE_ADPT_1SS_MASK; //support MCS 0~7
- pOperateMCS[1] &= RATE_ADPT_2SS_MASK;
- pOperateMCS[3] &= RATE_ADPT_MCS32_MASK;
- break;
+ // Legacy part we only use 6, 5.5,2,1 for N_24G and 6 for N_5G.
+ // Legacy part shall be handled at SelectRateSet().
+
+ //HT part
+ // TODO: may be different if we have different number of antenna
+ pOperateMCS[0] &= RATE_ADPT_1SS_MASK; //support MCS 0~7
+ pOperateMCS[1] &= RATE_ADPT_2SS_MASK;
+ pOperateMCS[3] &= RATE_ADPT_MCS32_MASK;
+ break;
//should never reach here
default:
- break;
+ break;
}
return true;
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH 3/9] staging: rtl8192u: Truncate block comments to 80 character length - Style
2018-06-19 19:55 v1 Coding style changes John Whitmore
2018-06-19 19:55 ` [PATCH 1/9] staging: rtl8192u: change block comments to prefered style - Coding Style John Whitmore
2018-06-19 19:55 ` [PATCH 2/9] staging: rtl8192u: Correct indentation of switch statement " John Whitmore
@ 2018-06-19 19:55 ` John Whitmore
2018-06-19 20:09 ` Andy Shevchenko
2018-06-19 19:56 ` [PATCH 4/9] staging: rtl8192u: Removal of white space from end of lines - Coding Style John Whitmore
` (5 subsequent siblings)
8 siblings, 1 reply; 14+ messages in thread
From: John Whitmore @ 2018-06-19 19:55 UTC (permalink / raw)
To: gregkh; +Cc: devel, linux-kernel, John Whitmore
Where possible truncation of block comments to the 80 character length
prefered by the coding style.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
---
.../rtl8192u/ieee80211/rtl819x_HTProc.c | 157 +++++++++++-------
1 file changed, 98 insertions(+), 59 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index 4bfadb49c363..40dcb4105e78 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -1,6 +1,9 @@
// SPDX-License-Identifier: GPL-2.0
-//As this function is mainly ported from Windows driver, so leave the name little changed. If any confusion caused, tell me. Created by WB. 2008.05.08
+/*
+ * As this function is mainly ported from Windows driver, so leave the name
+ * little changed. If any confusion caused, tell me. Created by WB. 2008.05.08
+ */
#include "ieee80211.h"
#include "rtl819x_HT.h"
u8 MCS_FILTER_ALL[16] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
@@ -42,8 +45,8 @@ static u8 AIRLINK_RALINK[3] = {0x00, 0x18, 0x02};
//static u8 DLINK_ATHEROS[3] = {0x00, 0x1c, 0xf0};
static u8 CISCO_BROADCOM[3] = {0x00, 0x17, 0x94};
/*
- * 2008/04/01 MH For Cisco G mode RX TP We need to change FW duration. Should we put the
- * code in other place??
+ * 2008/04/01 MH For Cisco G mode RX TP We need to change FW duration. Should we
+ * put the code in other place??
* static u8 WIFI_CISCO_G_AP[3] = {0x00, 0x40, 0x96};
*/
/*
@@ -95,8 +98,9 @@ void HTUpdateDefaultSetting(struct ieee80211_device *ieee)
pMgntInfo->bTxEnableFwCalcDur = (BOOLEAN)pNdisCommon->bRegTxEnableFwCalcDur;
#endif
/*
- * 8190 only, Realtek proprietary aggregation mode
- * Set MPDUDensity=2, 1: Set MPDUDensity=2(32k) for Realtek AP and set MPDUDensity=0(8k) for others
+ * 8190 only, Realtek proprietary aggregation mode Set MPDUDensity=2,
+ * 1: Set MPDUDensity=2(32k) for Realtek AP
+ * and set MPDUDensity=0(8k) for others
*/
pHTInfo->bRegRT2RTAggregation = 1;//0: Set MPDUDensity=2, 1: Set MPDUDensity=2(32k) for Realtek AP and set MPDUDensity=0(8k) for others
@@ -117,7 +121,8 @@ void HTUpdateDefaultSetting(struct ieee80211_device *ieee)
}
/*
- *function: This function print out each field on HT capability IE mainly from (Beacon/ProbeRsp/AssocReq)
+ *function: This function print out each field on HT capability
+ * IE mainly from (Beacon/ProbeRsp/AssocReq)
* input: u8* CapIE //Capability IE to be printed out
* u8* TitleString //mainly print out caller function
* output: none
@@ -151,7 +156,8 @@ void HTDebugHTCapability(u8 *CapIE, u8 *TitleString)
}
/*
- *function: This function print out each field on HT Information IE mainly from (Beacon/ProbeRsp)
+ *function: This function print out each field on HT Information
+ * IE mainly from (Beacon/ProbeRsp)
* input: u8* InfoIE //Capability IE to be printed out
* u8* TitleString //mainly print out caller function
* output: none
@@ -387,7 +393,8 @@ static void HTIOTPeerDetermine(struct ieee80211_device *ieee)
}
/*
- *function: Check whether driver should declare received rate up to MCS13 only since some chipset is not good
+ *function: Check whether driver should declare received rate up to MCS13
+ * only since some chipset is not good
* at receiving MCS14~15 frame from some AP.
* input: struct ieee80211_device* ieee
* u8 * PeerMacAddr
@@ -402,7 +409,8 @@ static u8 HTIOTActIsDisableMCS14(struct ieee80211_device *ieee, u8 *PeerMacAddr)
/*
* Function: HTIOTActIsDisableMCS15
*
- * Overview: Check whether driver should declare capability of receiving MCS15
+ * Overview: Check whether driver should declare capability of receiving
+ * MCS15
*
* Input:
* PADAPTER Adapter,
@@ -439,7 +447,8 @@ static bool HTIOTActIsDisableMCS15(struct ieee80211_device *ieee)
/*
* Function: HTIOTActIsDisableMCSTwoSpatialStream
*
- * Overview: Check whether driver should declare capability of receiving All 2 ss packets
+ * Overview: Check whether driver should declare capability of receiving
+ * All 2 ss packets
*
* Input:
* PADAPTER Adapter,
@@ -462,7 +471,8 @@ static bool HTIOTActIsDisableMCSTwoSpatialStream(struct ieee80211_device *ieee,
* input: struct ieee80211_device* ieee
* u8* PeerMacAddr
* output: none
- * return: return 1 if driver should disable EDCA turbo mode(otherwise return 0)
+ * return: return 1 if driver should disable EDCA turbo mode
+ * (otherwise return 0)
*/
static u8 HTIOTActIsDisableEDCATurbo(struct ieee80211_device *ieee,
u8 *PeerMacAddr)
@@ -471,7 +481,8 @@ static u8 HTIOTActIsDisableEDCATurbo(struct ieee80211_device *ieee,
}
/*
- *function: Check whether we need to use OFDM to sned MGNT frame for broadcom AP
+ *function: Check whether we need to use OFDM to send MGNT frame for
+ * broadcom AP
* input: struct ieee80211_network *network //current network we live
* output: none
* return: return 1 if true
@@ -480,9 +491,13 @@ static u8 HTIOTActIsMgntUseCCK6M(struct ieee80211_network *network)
{
u8 retValue = 0;
- // 2008/01/25 MH Judeg if we need to use OFDM to sned MGNT frame for broadcom AP.
- // 2008/01/28 MH We must prevent that we select null bssid to link.
-
+ /*
+ * 2008/01/25 MH Judeg if we need to use OFDM to sned MGNT frame for
+ * broadcom AP.
+ */
+ /*
+ * 2008/01/28 MH We must prevent that we select null bssid to link.
+ */
if (network->broadcom_cap_exist)
retValue = 1;
@@ -510,9 +525,9 @@ void HTResetIOTSetting(PRT_HIGH_THROUGHPUT pHTInfo)
/*
*function: Construct Capablility Element in Beacon... if HTEnable is turned on
* input: struct ieee80211_device* ieee
- * u8* posHTCap //pointer to store Capability Ele
- * u8* len //store length of CE
- * u8 IsEncrypt //whether encrypt, needed further
+ * u8* posHTCap //pointer to store Capability Ele
+ * u8* len //store length of CE
+ * u8 IsEncrypt //whether encrypt, needed further
* output: none
* return: none
* notice: posHTCap can't be null and should be initialized before.
@@ -551,7 +566,7 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
pCapELE->ShortGI20Mhz = 1; // We can receive Short GI!!
pCapELE->ShortGI40Mhz = 1; // We can receive Short GI!!
//DbgPrint("TX HT cap/info ele BW=%d SG20=%d SG40=%d\n\r",
- //pCapELE->ChlWidth, pCapELE->ShortGI20Mhz, pCapELE->ShortGI40Mhz);
+ //pCapELE->ChlWidth, pCapELE->ShortGI20Mhz, pCapELE->ShortGI40Mhz);
pCapELE->TxSTBC = 1;
pCapELE->RxSTBC = 0;
pCapELE->DelayBA = 0; // Do not support now!!
@@ -587,7 +602,8 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
/*
* 2008.06.12
- * For RTL819X, if pairwisekey = wep/tkip, ap is ralink, we support only MCS0~7.
+ * For RTL819X, if pairwisekey = wep/tkip, ap is ralink,
+ * we support only MCS0~7.
*/
if (ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev)) {
int i;
@@ -612,19 +628,23 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
// IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA | IEEE80211_DL_HT, posHTCap, *len -2);
- //Print each field in detail. Driver should not print out this message by default
+ /*
+ * Print each field in detail. Driver should not print out this
+ * message by default
+ */
// HTDebugHTCapability(posHTCap, (u8*)"HTConstructCapability()");
}
/*
- *function: Construct Information Element in Beacon... if HTEnable is turned on
+ *function: Construct Information Element in Beacon... if HTEnable is turned on
* input: struct ieee80211_device* ieee
- * u8* posHTCap //pointer to store Information Ele
- * u8* len //store len of
- * u8 IsEncrypt //whether encrypt, needed further
+ * u8* posHTCap //pointer to store Information Ele
+ * u8* len //store len of
+ * u8 IsEncrypt //whether encrypt, needed further
* output: none
* return: none
- * notice: posHTCap can't be null and be initialized before. only AP and IBSS sta should do this
+ * notice: posHTCap can't be null and be initialized before.
+ Only AP and IBSS sta should do this
*/
void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *len, u8 IsEncrypt)
{
@@ -666,16 +686,17 @@ void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *le
}
/*
- * According to experiment, Realtek AP to STA (based on rtl8190) may achieve best performance
- * if both STA and AP set limitation of aggregation size to 32K, that is, set AMPDU density to 2
- * (Ref: IEEE 11n specification). However, if Realtek STA associates to other AP, STA should set
- * limitation of aggregation size to 8K, otherwise, performance of traffic stream from STA to AP
- * will be much less than the traffic stream from AP to STA if both of the stream runs concurrently
- * at the same time.
+ * According to experiment, Realtek AP to STA (based on rtl8190) may achieve
+ * best performance if both STA and AP set limitation of aggregation size to
+ * 32K, that is, set AMPDU density to 2 (Ref: IEEE 11n specification). However,
+ * if Realtek STA associates to other AP, STA should set limitation of
+ * aggregation size to 8K, otherwise, performance of traffic stream from STA to
+ * AP will be much less than the traffic stream from AP to STA if both of the
+ * stream runs concurrently at the same time.
*
* Frame Format
- * Element ID Length OUI Type1 Reserved
- * 1 byte 1 byte 3 bytes 1 byte 1 byte
+ * Element ID Length OUI Type1 Reserved
+ * 1 byte 1 byte 3 bytes 1 byte 1 byte
*
* OUI = 0x00, 0xe0, 0x4c,
* Type = 0x02
@@ -735,8 +756,8 @@ void HTConstructRT2RTAggElement(struct ieee80211_device *ieee, u8 *posRT2RTAgg,
/*
*function: Pick the right Rate Adaptive table to use
- * input: struct ieee80211_device* ieee
- * u8* pOperateMCS //A pointer to MCS rate bitmap
+ * input: struct ieee80211_device* ieee
+ * u8* pOperateMCS //A pointer to MCS rate bitmap
* return: always we return true
* notice:
*/
@@ -781,14 +802,15 @@ static u8 HT_PickMCSRate(struct ieee80211_device *ieee, u8 *pOperateMCS)
}
/*
- * Description:
- * This function will get the highest speed rate in input MCS set.
+ * Description:
+ * This function will get the highest speed rate in input MCS set.
*
- * /param Adapter Pionter to Adapter entity
- * pMCSRateSet Pointer to MCS rate bitmap
- * pMCSFilter Pointer to MCS rate filter
+ * /param Adapter Pionter to Adapter entity
+ * pMCSRateSet Pointer to MCS rate bitmap
+ * pMCSFilter Pointer to MCS rate filter
*
- * /return Highest MCS rate included in pMCSRateSet and filtered by pMCSFilter.
+ * /return Highest MCS rate included in pMCSRateSet and filtered by
+ * pMCSFilter.
*
*/
/*
@@ -853,11 +875,15 @@ static u8 HTFilterMCSRate(struct ieee80211_device *ieee, u8 *pSupportMCS,
pOperateMCS[i] = ieee->Regdot11HTOperationalRateSet[i] & pSupportMCS[i];
}
- // TODO: adjust our operational rate set according to our channel bandwidth, STBC and Antenna number
+ /*
+ * TODO: adjust our operational rate set according to our channel
+ * bandwidth, STBC and Antenna number
+ */
/*
- * TODO: fill suggested rate adaptive rate index and give firmware info using Tx command packet
- * we also shall suggested the first start rate set according to our singal strength
+ * TODO: fill suggested rate adaptive rate index and give firmware info
+ * using Tx command packet we also shall suggested the first start rate
+ * set according to our singal strength
*/
HT_PickMCSRate(ieee, pOperateMCS);
@@ -971,12 +997,17 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
pHTInfo->CurrentAMPDUFactor = pHTInfo->AMPDU_Factor;
} else {
/*
- * Set MPDU density to 2 to Realtek AP, and set it to 0 for others
- * Replace MPDU factor declared in original association response frame format. 2007.08.20 by Emily
+ * Set MPDU density to 2 to Realtek AP,
+ * and set it to 0 for others
+ * Replace MPDU factor declared in original association
+ * response frame format. 2007.08.20 by Emily
*/
if (ieee->current_network.bssht.bdRT2RTAggregation) {
if (ieee->pairwise_key_type != KEY_TYPE_NA)
- // Realtek may set 32k in security mode and 64k for others
+ /*
+ * Realtek may set 32k in security mode and 64k
+ * for others
+ */
pHTInfo->CurrentAMPDUFactor = pPeerHTCap->MaxRxAMPDUFactor;
else
pHTInfo->CurrentAMPDUFactor = HT_AGG_SIZE_64K;
@@ -1016,7 +1047,8 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
/*
* Filter out unsupported HT rate for this AP
* Update RATR table
- * This is only for 8190 ,8192 or later product which using firmware to handle rate adaptive mechanism.
+ * This is only for 8190 ,8192 or later product which using firmware to
+ * handle rate adaptive mechanism.
*/
/*
@@ -1053,7 +1085,9 @@ void HTSetConnectBwModeCallback(struct ieee80211_device *ieee);
* input: struct ieee80211_device* ieee
* output: none
* return: none
- * notice: This function is called when * (1) MPInitialization Phase * (2) Receiving of Deauthentication from AP
+ * notice: This function is called when
+ * * (1) MPInitialization Phase
+ * * (2) Receiving of Deauthentication from AP
*/
// TODO: Should this funciton be called when receiving of Disassociation?
void HTInitializeHTInfo(struct ieee80211_device *ieee)
@@ -1078,8 +1112,8 @@ void HTInitializeHTInfo(struct ieee80211_device *ieee)
/*
* CCK rate support
* This flag is set to true to support CCK rate by default.
- * It will be affected by "pHTInfo->bRegSuppCCK" and AP capabilities only when associate to
- * 11N BSS.
+ * It will be affected by "pHTInfo->bRegSuppCCK" and AP capabilities
+ * only when associate to 11N BSS.
*/
pHTInfo->bCurSuppCCK = true;
@@ -1143,7 +1177,8 @@ void HTInitializeBssDesc(PBSS_HT pBssHT)
/*
*function: initialize Bss HT structure(struct PBSS_HT)
* input: struct ieee80211_device *ieee
- * struct ieee80211_network *pNetwork //usually current network we are live in
+ * struct ieee80211_network *pNetwork //usually current network
+ * we are live in
* output: none
* return: none
* notice: This function should ONLY be called before association
@@ -1161,7 +1196,10 @@ void HTResetSelfAndSavePeerSetting(struct ieee80211_device *ieee, struct ieee802
// Save Peer Setting before Association
//
IEEE80211_DEBUG(IEEE80211_DL_HT, "==============>%s()\n", __func__);
- /*unmark bEnableHT flag here is the same reason why unmarked in function ieee80211_softmac_new_net. WB 2008.09.10*/
+ /*
+ * unmark bEnableHT flag here is the same reason why unmarked in
+ * function ieee80211_softmac_new_net. WB 2008.09.10
+ */
// if( pHTInfo->bEnableHT && pNetwork->bssht.bdSupportHT)
if (pNetwork->bssht.bdSupportHT) {
pHTInfo->bCurrentHTSupport = true;
@@ -1188,7 +1226,8 @@ void HTResetSelfAndSavePeerSetting(struct ieee80211_device *ieee, struct ieee802
/*
* Decide IOT Action
- * Must be called after the parameter of pHTInfo->bCurrentRT2RTAggregation is decided
+ * Must be called after the parameter of
+ * pHTInfo->bCurrentRT2RTAggregation is decided
*/
pHTInfo->IOTAction = 0;
bIOTAction = HTIOTActIsDisableMCS14(ieee, pNetwork->bssid);
@@ -1303,10 +1342,10 @@ void HTSetConnectBwMode(struct ieee80211_device *ieee, HT_CHANNEL_WIDTH Bandwidt
pHTInfo->bSwBwInProgress = true;
/*
- * TODO: 2007.7.13 by Emily Wait 2000ms in order to guarantee that switching
- * bandwidth is executed after scan is finished. It is a temporal solution
- * because software should ganrantee the last operation of switching bandwidth
- * is executed properlly.
+ * TODO: 2007.7.13 by Emily Wait 2000ms in order to guarantee that
+ * switching bandwidth is executed after scan is finished. It is a
+ * temporal solution because software should ganrantee the last
+ * operation of switching bandwidth is executed properlly.
*/
HTSetConnectBwModeCallback(ieee);
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* Re: [PATCH 3/9] staging: rtl8192u: Truncate block comments to 80 character length - Style
2018-06-19 19:55 ` [PATCH 3/9] staging: rtl8192u: Truncate block comments to 80 character length - Style John Whitmore
@ 2018-06-19 20:09 ` Andy Shevchenko
0 siblings, 0 replies; 14+ messages in thread
From: Andy Shevchenko @ 2018-06-19 20:09 UTC (permalink / raw)
To: John Whitmore; +Cc: Greg Kroah-Hartman, devel, Linux Kernel Mailing List
On Tue, Jun 19, 2018 at 10:55 PM, John Whitmore <johnfwhitmore@gmail.com> wrote:
> Where possible truncation of block comments to the 80 character length
> prefered by the coding style.
Is it somehow automated?!
> /*
> - * 8190 only, Realtek proprietary aggregation mode
> - * Set MPDUDensity=2, 1: Set MPDUDensity=2(32k) for Realtek AP and set MPDUDensity=0(8k) for others
> + * 8190 only, Realtek proprietary aggregation mode Set MPDUDensity=2,
> + * 1: Set MPDUDensity=2(32k) for Realtek AP
> + * and set MPDUDensity=0(8k) for others
> */
This is just an example how it should NOT be done.
The original looks better than the result in terms of understanding.
Had you (re-)read the result?
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 4/9] staging: rtl8192u: Removal of white space from end of lines - Coding Style
2018-06-19 19:55 v1 Coding style changes John Whitmore
` (2 preceding siblings ...)
2018-06-19 19:55 ` [PATCH 3/9] staging: rtl8192u: Truncate block comments to 80 character length - Style John Whitmore
@ 2018-06-19 19:56 ` John Whitmore
2018-06-19 19:56 ` [PATCH 5/9] staging: rtl8192u: Use %s and __func__ instead of hardcoded string - Style John Whitmore
` (4 subsequent siblings)
8 siblings, 0 replies; 14+ messages in thread
From: John Whitmore @ 2018-06-19 19:56 UTC (permalink / raw)
To: gregkh; +Cc: devel, linux-kernel, John Whitmore
Previous truncation of comment blocks to 80 character line length resulted in
some white space at endof line.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
---
.../rtl8192u/ieee80211/rtl819x_HTProc.c | 26 +++++++++----------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index 40dcb4105e78..e5ca4f3bfc7e 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -98,8 +98,8 @@ void HTUpdateDefaultSetting(struct ieee80211_device *ieee)
pMgntInfo->bTxEnableFwCalcDur = (BOOLEAN)pNdisCommon->bRegTxEnableFwCalcDur;
#endif
/*
- * 8190 only, Realtek proprietary aggregation mode Set MPDUDensity=2,
- * 1: Set MPDUDensity=2(32k) for Realtek AP
+ * 8190 only, Realtek proprietary aggregation mode Set MPDUDensity=2,
+ * 1: Set MPDUDensity=2(32k) for Realtek AP
* and set MPDUDensity=0(8k) for others
*/
pHTInfo->bRegRT2RTAggregation = 1;//0: Set MPDUDensity=2, 1: Set MPDUDensity=2(32k) for Realtek AP and set MPDUDensity=0(8k) for others
@@ -121,7 +121,7 @@ void HTUpdateDefaultSetting(struct ieee80211_device *ieee)
}
/*
- *function: This function print out each field on HT capability
+ *function: This function print out each field on HT capability
* IE mainly from (Beacon/ProbeRsp/AssocReq)
* input: u8* CapIE //Capability IE to be printed out
* u8* TitleString //mainly print out caller function
@@ -393,7 +393,7 @@ static void HTIOTPeerDetermine(struct ieee80211_device *ieee)
}
/*
- *function: Check whether driver should declare received rate up to MCS13
+ *function: Check whether driver should declare received rate up to MCS13
* only since some chipset is not good
* at receiving MCS14~15 frame from some AP.
* input: struct ieee80211_device* ieee
@@ -409,7 +409,7 @@ static u8 HTIOTActIsDisableMCS14(struct ieee80211_device *ieee, u8 *PeerMacAddr)
/*
* Function: HTIOTActIsDisableMCS15
*
- * Overview: Check whether driver should declare capability of receiving
+ * Overview: Check whether driver should declare capability of receiving
* MCS15
*
* Input:
@@ -447,7 +447,7 @@ static bool HTIOTActIsDisableMCS15(struct ieee80211_device *ieee)
/*
* Function: HTIOTActIsDisableMCSTwoSpatialStream
*
- * Overview: Check whether driver should declare capability of receiving
+ * Overview: Check whether driver should declare capability of receiving
* All 2 ss packets
*
* Input:
@@ -481,7 +481,7 @@ static u8 HTIOTActIsDisableEDCATurbo(struct ieee80211_device *ieee,
}
/*
- *function: Check whether we need to use OFDM to send MGNT frame for
+ *function: Check whether we need to use OFDM to send MGNT frame for
* broadcom AP
* input: struct ieee80211_network *network //current network we live
* output: none
@@ -602,7 +602,7 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
/*
* 2008.06.12
- * For RTL819X, if pairwisekey = wep/tkip, ap is ralink,
+ * For RTL819X, if pairwisekey = wep/tkip, ap is ralink,
* we support only MCS0~7.
*/
if (ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev)) {
@@ -997,7 +997,7 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
pHTInfo->CurrentAMPDUFactor = pHTInfo->AMPDU_Factor;
} else {
/*
- * Set MPDU density to 2 to Realtek AP,
+ * Set MPDU density to 2 to Realtek AP,
* and set it to 0 for others
* Replace MPDU factor declared in original association
* response frame format. 2007.08.20 by Emily
@@ -1112,7 +1112,7 @@ void HTInitializeHTInfo(struct ieee80211_device *ieee)
/*
* CCK rate support
* This flag is set to true to support CCK rate by default.
- * It will be affected by "pHTInfo->bRegSuppCCK" and AP capabilities
+ * It will be affected by "pHTInfo->bRegSuppCCK" and AP capabilities
* only when associate to 11N BSS.
*/
pHTInfo->bCurSuppCCK = true;
@@ -1177,7 +1177,7 @@ void HTInitializeBssDesc(PBSS_HT pBssHT)
/*
*function: initialize Bss HT structure(struct PBSS_HT)
* input: struct ieee80211_device *ieee
- * struct ieee80211_network *pNetwork //usually current network
+ * struct ieee80211_network *pNetwork //usually current network
* we are live in
* output: none
* return: none
@@ -1197,7 +1197,7 @@ void HTResetSelfAndSavePeerSetting(struct ieee80211_device *ieee, struct ieee802
//
IEEE80211_DEBUG(IEEE80211_DL_HT, "==============>%s()\n", __func__);
/*
- * unmark bEnableHT flag here is the same reason why unmarked in
+ * unmark bEnableHT flag here is the same reason why unmarked in
* function ieee80211_softmac_new_net. WB 2008.09.10
*/
// if( pHTInfo->bEnableHT && pNetwork->bssht.bdSupportHT)
@@ -1226,7 +1226,7 @@ void HTResetSelfAndSavePeerSetting(struct ieee80211_device *ieee, struct ieee802
/*
* Decide IOT Action
- * Must be called after the parameter of
+ * Must be called after the parameter of
* pHTInfo->bCurrentRT2RTAggregation is decided
*/
pHTInfo->IOTAction = 0;
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH 5/9] staging: rtl8192u: Use %s and __func__ instead of hardcoded string - Style
2018-06-19 19:55 v1 Coding style changes John Whitmore
` (3 preceding siblings ...)
2018-06-19 19:56 ` [PATCH 4/9] staging: rtl8192u: Removal of white space from end of lines - Coding Style John Whitmore
@ 2018-06-19 19:56 ` John Whitmore
2018-06-19 20:19 ` Andy Shevchenko
2018-06-19 19:56 ` [PATCH 6/9] staging: rtl8192u: Remove braces from single statement blocks " John Whitmore
` (3 subsequent siblings)
8 siblings, 1 reply; 14+ messages in thread
From: John Whitmore @ 2018-06-19 19:56 UTC (permalink / raw)
To: gregkh; +Cc: devel, linux-kernel, John Whitmore
Changed a number of hard coded function names to use %s and __func__
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
---
drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index e5ca4f3bfc7e..732d03e8474e 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -539,7 +539,7 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
//u8 bIsDeclareMCS13;
if (!posHTCap || !pHT) {
- IEEE80211_DEBUG(IEEE80211_DL_ERR, "posHTCap or pHTInfo can't be null in HTConstructCapabilityElement()\n");
+ IEEE80211_DEBUG(IEEE80211_DL_ERR, "posHTCap or pHTInfo can't be null in %s\n", __func__);
return;
}
memset(posHTCap, 0, *len);
@@ -652,7 +652,7 @@ void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *le
PHT_INFORMATION_ELE pHTInfoEle = (PHT_INFORMATION_ELE)posHTInfo;
if (!posHTInfo || !pHTInfoEle) {
- IEEE80211_DEBUG(IEEE80211_DL_ERR, "posHTInfo or pHTInfoEle can't be null in HTConstructInfoElement()\n");
+ IEEE80211_DEBUG(IEEE80211_DL_ERR, "posHTInfo or pHTInfoEle can't be null in %s\n", __func__);
return;
}
@@ -716,7 +716,7 @@ void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *le
void HTConstructRT2RTAggElement(struct ieee80211_device *ieee, u8 *posRT2RTAgg, u8 *len)
{
if (!posRT2RTAgg) {
- IEEE80211_DEBUG(IEEE80211_DL_ERR, "posRT2RTAgg can't be null in HTConstructRT2RTAggElement()\n");
+ IEEE80211_DEBUG(IEEE80211_DL_ERR, "posRT2RTAgg can't be null in %s\n", __func__);
return;
}
memset(posRT2RTAgg, 0, *len);
@@ -766,7 +766,7 @@ static u8 HT_PickMCSRate(struct ieee80211_device *ieee, u8 *pOperateMCS)
u8 i;
if (!pOperateMCS) {
- IEEE80211_DEBUG(IEEE80211_DL_ERR, "pOperateMCS can't be null in HT_PickMCSRate()\n");
+ IEEE80211_DEBUG(IEEE80211_DL_ERR, "pOperateMCS can't be null in %s\n", __func__);
return false;
}
@@ -829,7 +829,7 @@ u8 HTGetHighestMCSRate(struct ieee80211_device *ieee, u8 *pMCSRateSet, u8 *pMCSF
u8 availableMcsRate[16];
if (!pMCSRateSet || !pMCSFilter) {
- IEEE80211_DEBUG(IEEE80211_DL_ERR, "pMCSRateSet or pMCSFilter can't be null in HTGetHighestMCSRate()\n");
+ IEEE80211_DEBUG(IEEE80211_DL_ERR, "pMCSRateSet or pMCSFilter can't be null in %s\n", __func__);
return false;
}
for (i = 0; i < 16; i++)
@@ -914,7 +914,7 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
static u8 EWC11NHTInfo[] = {0x00, 0x90, 0x4c, 0x34}; // For 11n EWC definition, 2007.07.17, by Emily
if (!pHTInfo->bCurrentHTSupport) {
- IEEE80211_DEBUG(IEEE80211_DL_ERR, "<=== HTOnAssocRsp(): HT_DISABLE\n");
+ IEEE80211_DEBUG(IEEE80211_DL_ERR, "<=== %s: HT_DISABLE\n", __func__);
return;
}
IEEE80211_DEBUG(IEEE80211_DL_HT, "===> HTOnAssocRsp_wq(): HT_ENABLE\n");
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* Re: [PATCH 5/9] staging: rtl8192u: Use %s and __func__ instead of hardcoded string - Style
2018-06-19 19:56 ` [PATCH 5/9] staging: rtl8192u: Use %s and __func__ instead of hardcoded string - Style John Whitmore
@ 2018-06-19 20:19 ` Andy Shevchenko
0 siblings, 0 replies; 14+ messages in thread
From: Andy Shevchenko @ 2018-06-19 20:19 UTC (permalink / raw)
To: John Whitmore; +Cc: Greg Kroah-Hartman, devel, Linux Kernel Mailing List
On Tue, Jun 19, 2018 at 10:56 PM, John Whitmore <johnfwhitmore@gmail.com> wrote:
> Changed a number of hard coded function names to use %s and __func__
Oh.
Looking at the code, much better fix would be...
Move IEEE80211_DEBUG() to use netdev_dbg() [dev_dbg() or pr_dbg() as
last resort) and actually drop it completely in favour of the
netdev_dbg() followed by removing __func__ parameter completely from
the messages as DYNAMIC DEBUG will do this if user asks so.
The IEEE80211_DEBUG_DATA() should be just print_hex_dump().
P.S. I would rather NAK this patch because it brings nothing, just a
waste of time for my opinion.
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 6/9] staging: rtl8192u: Remove braces from single statement blocks - Style
2018-06-19 19:55 v1 Coding style changes John Whitmore
` (4 preceding siblings ...)
2018-06-19 19:56 ` [PATCH 5/9] staging: rtl8192u: Use %s and __func__ instead of hardcoded string - Style John Whitmore
@ 2018-06-19 19:56 ` John Whitmore
2018-06-19 19:56 ` [PATCH 7/9] staging: rtl8192u: Correciton of block comments - Coding Style John Whitmore
` (2 subsequent siblings)
8 siblings, 0 replies; 14+ messages in thread
From: John Whitmore @ 2018-06-19 19:56 UTC (permalink / raw)
To: gregkh; +Cc: devel, linux-kernel, John Whitmore
Removed the unrequired braces from single statement blocks - Coding Style.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
---
drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c | 11 ++++-------
1 file changed, 4 insertions(+), 7 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index 732d03e8474e..c942d886429e 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -554,11 +554,10 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
//HT capability info
pCapELE->AdvCoding = 0; // This feature is not supported now!!
- if (ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev)) {
+ if (ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev))
pCapELE->ChlWidth = 0;
- } else {
+ else
pCapELE->ChlWidth = (pHT->bRegBW40MHz ? 1 : 0);
- }
// pCapELE->ChlWidth = (pHT->bRegBW40MHz?1:0);
pCapELE->MimoPwrSave = pHT->SelfMimoPs;
@@ -727,9 +726,8 @@ void HTConstructRT2RTAggElement(struct ieee80211_device *ieee, u8 *posRT2RTAgg,
*posRT2RTAgg++ = 0x01;
*posRT2RTAgg = 0x10;//*posRT2RTAgg = 0x02;
- if (ieee->bSupportRemoteWakeUp) {
+ if (ieee->bSupportRemoteWakeUp)
*posRT2RTAgg |= 0x08;//RT_HT_CAP_USE_WOW;
- }
*len = 6 + 2;
return;
@@ -871,9 +869,8 @@ static u8 HTFilterMCSRate(struct ieee80211_device *ieee, u8 *pSupportMCS,
u8 i = 0;
// filter out operational rate set not supported by AP, the length of it is 16
- for (i = 0; i <= 15; i++) {
+ for (i = 0; i <= 15; i++)
pOperateMCS[i] = ieee->Regdot11HTOperationalRateSet[i] & pSupportMCS[i];
- }
/*
* TODO: adjust our operational rate set according to our channel
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH 7/9] staging: rtl8192u: Correciton of block comments - Coding Style
2018-06-19 19:55 v1 Coding style changes John Whitmore
` (5 preceding siblings ...)
2018-06-19 19:56 ` [PATCH 6/9] staging: rtl8192u: Remove braces from single statement blocks " John Whitmore
@ 2018-06-19 19:56 ` John Whitmore
2018-06-20 8:53 ` Dan Carpenter
2018-06-19 19:56 ` [PATCH 8/9] staging: rtl8192u: Correct if statement " John Whitmore
2018-06-19 19:56 ` [PATCH 9/9] staging: rtl8192u: Correction of spelling mistake in comment John Whitmore
8 siblings, 1 reply; 14+ messages in thread
From: John Whitmore @ 2018-06-19 19:56 UTC (permalink / raw)
To: gregkh; +Cc: devel, linux-kernel, John Whitmore
Correcton of a few block comments to comply with Coding Style.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
---
.../staging/rtl8192u/ieee80211/rtl819x_HTProc.c | 17 ++++++++---------
1 file changed, 8 insertions(+), 9 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index c942d886429e..98688f9fdee6 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -643,7 +643,7 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
* output: none
* return: none
* notice: posHTCap can't be null and be initialized before.
- Only AP and IBSS sta should do this
+ * Only AP and IBSS sta should do this
*/
void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *len, u8 IsEncrypt)
{
@@ -724,7 +724,7 @@ void HTConstructRT2RTAggElement(struct ieee80211_device *ieee, u8 *posRT2RTAgg,
*posRT2RTAgg++ = 0x4c;
*posRT2RTAgg++ = 0x02;
*posRT2RTAgg++ = 0x01;
- *posRT2RTAgg = 0x10;//*posRT2RTAgg = 0x02;
+ *posRT2RTAgg = 0x10; // *posRT2RTAgg = 0x02;
if (ieee->bSupportRemoteWakeUp)
*posRT2RTAgg |= 0x08;//RT_HT_CAP_USE_WOW;
@@ -734,16 +734,15 @@ void HTConstructRT2RTAggElement(struct ieee80211_device *ieee, u8 *posRT2RTAgg,
#ifdef TODO
#if (HAL_CODE_BASE == RTL8192 && DEV_BUS_TYPE == USB_INTERFACE)
/*
- //Emily. If it is required to Ask Realtek AP to send AMPDU during AES mode, enable this
- section of code.
+ * Emily. If it is required to Ask Realtek AP to send AMPDU during AES
+ * mode, enable this section of code.
+ */
+#if 0
if(IS_UNDER_11N_AES_MODE(Adapter))
- {
posRT2RTAgg->Octet[5] |=RT_HT_CAP_USE_AMPDU;
- }else
- {
+ else
posRT2RTAgg->Octet[5] &= 0xfb;
- }
- */
+#endif
#else
// Do Nothing
#endif
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* Re: [PATCH 7/9] staging: rtl8192u: Correciton of block comments - Coding Style
2018-06-19 19:56 ` [PATCH 7/9] staging: rtl8192u: Correciton of block comments - Coding Style John Whitmore
@ 2018-06-20 8:53 ` Dan Carpenter
0 siblings, 0 replies; 14+ messages in thread
From: Dan Carpenter @ 2018-06-20 8:53 UTC (permalink / raw)
To: John Whitmore; +Cc: gregkh, devel, linux-kernel
On Tue, Jun 19, 2018 at 08:56:03PM +0100, John Whitmore wrote:
> @@ -734,16 +734,15 @@ void HTConstructRT2RTAggElement(struct ieee80211_device *ieee, u8 *posRT2RTAgg,
> #ifdef TODO
> #if (HAL_CODE_BASE == RTL8192 && DEV_BUS_TYPE == USB_INTERFACE)
> /*
> - //Emily. If it is required to Ask Realtek AP to send AMPDU during AES mode, enable this
> - section of code.
> + * Emily. If it is required to Ask Realtek AP to send AMPDU during AES
> + * mode, enable this section of code.
> + */
> +#if 0
> if(IS_UNDER_11N_AES_MODE(Adapter))
> - {
> posRT2RTAgg->Octet[5] |=RT_HT_CAP_USE_AMPDU;
> - }else
> - {
> + else
> posRT2RTAgg->Octet[5] &= 0xfb;
> - }
> - */
> +#endif
> #else
> // Do Nothing
> #endif
Please don't introduce new #if 0 blocks. We should just be deleting
ifdeffed out code. It's an almost mindless task. And anyway the #ifdef
TODO works as an #if 0 anyway so this will never be compiled.
regards,
dan carpenter
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 8/9] staging: rtl8192u: Correct if statement - Coding Style
2018-06-19 19:55 v1 Coding style changes John Whitmore
` (6 preceding siblings ...)
2018-06-19 19:56 ` [PATCH 7/9] staging: rtl8192u: Correciton of block comments - Coding Style John Whitmore
@ 2018-06-19 19:56 ` John Whitmore
2018-06-19 19:56 ` [PATCH 9/9] staging: rtl8192u: Correction of spelling mistake in comment John Whitmore
8 siblings, 0 replies; 14+ messages in thread
From: John Whitmore @ 2018-06-19 19:56 UTC (permalink / raw)
To: gregkh; +Cc: devel, linux-kernel, John Whitmore
Corrected the coding style of if statement.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
---
drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index 98688f9fdee6..05f0c8130458 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -738,8 +738,8 @@ void HTConstructRT2RTAggElement(struct ieee80211_device *ieee, u8 *posRT2RTAgg,
* mode, enable this section of code.
*/
#if 0
- if(IS_UNDER_11N_AES_MODE(Adapter))
- posRT2RTAgg->Octet[5] |=RT_HT_CAP_USE_AMPDU;
+ if (IS_UNDER_11N_AES_MODE(Adapter))
+ posRT2RTAgg->Octet[5] |= RT_HT_CAP_USE_AMPDU;
else
posRT2RTAgg->Octet[5] &= 0xfb;
#endif
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH 9/9] staging: rtl8192u: Correction of spelling mistake in comment.
2018-06-19 19:55 v1 Coding style changes John Whitmore
` (7 preceding siblings ...)
2018-06-19 19:56 ` [PATCH 8/9] staging: rtl8192u: Correct if statement " John Whitmore
@ 2018-06-19 19:56 ` John Whitmore
8 siblings, 0 replies; 14+ messages in thread
From: John Whitmore @ 2018-06-19 19:56 UTC (permalink / raw)
To: gregkh; +Cc: devel, linux-kernel, John Whitmore
Simple spelling correction.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
---
drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index 05f0c8130458..35d85e0a45a6 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -879,7 +879,7 @@ static u8 HTFilterMCSRate(struct ieee80211_device *ieee, u8 *pSupportMCS,
/*
* TODO: fill suggested rate adaptive rate index and give firmware info
* using Tx command packet we also shall suggested the first start rate
- * set according to our singal strength
+ * set according to our signal strength
*/
HT_PickMCSRate(ieee, pOperateMCS);
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread