public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Christoffer Dall <christoffer.dall@arm.com>,
	Marc Zyngier <marc.zyngier@arm.com>,
	Sasha Levin <sashal@kernel.org>,
	kvmarm@lists.cs.columbia.edu
Subject: [PATCH AUTOSEL 4.20 21/52] KVM: arm/arm64: vgic: Always initialize the group of private IRQs
Date: Mon, 11 Mar 2019 15:54:45 -0400	[thread overview]
Message-ID: <20190311195516.137772-21-sashal@kernel.org> (raw)
In-Reply-To: <20190311195516.137772-1-sashal@kernel.org>

From: Christoffer Dall <christoffer.dall@arm.com>

[ Upstream commit ab2d5eb03dbb7b37a1c6356686fb48626ab0c93e ]

We currently initialize the group of private IRQs during
kvm_vgic_vcpu_init, and the value of the group depends on the GIC model
we are emulating.  However, CPUs created before creating (and
initializing) the VGIC might end up with the wrong group if the VGIC
is created as GICv3 later.

Since we have no enforced ordering of creating the VGIC and creating
VCPUs, we can end up with part the VCPUs being properly intialized and
the remaining incorrectly initialized.  That also means that we have no
single place to do the per-cpu data structure initialization which
depends on knowing the emulated GIC model (which is only the group
field).

This patch removes the incorrect comment from kvm_vgic_vcpu_init and
initializes the group of all previously created VCPUs's private
interrupts in vgic_init in addition to the existing initialization in
kvm_vgic_vcpu_init.

Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 virt/kvm/arm/vgic/vgic-init.c | 22 ++++++++++++++--------
 1 file changed, 14 insertions(+), 8 deletions(-)

diff --git a/virt/kvm/arm/vgic/vgic-init.c b/virt/kvm/arm/vgic/vgic-init.c
index 33e7ee814f7b..8196e4f8731f 100644
--- a/virt/kvm/arm/vgic/vgic-init.c
+++ b/virt/kvm/arm/vgic/vgic-init.c
@@ -231,13 +231,6 @@ int kvm_vgic_vcpu_init(struct kvm_vcpu *vcpu)
 			irq->config = VGIC_CONFIG_LEVEL;
 		}
 
-		/*
-		 * GICv3 can only be created via the KVM_DEVICE_CREATE API and
-		 * so we always know the emulation type at this point as it's
-		 * either explicitly configured as GICv3, or explicitly
-		 * configured as GICv2, or not configured yet which also
-		 * implies GICv2.
-		 */
 		if (dist->vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3)
 			irq->group = 1;
 		else
@@ -281,7 +274,7 @@ int vgic_init(struct kvm *kvm)
 {
 	struct vgic_dist *dist = &kvm->arch.vgic;
 	struct kvm_vcpu *vcpu;
-	int ret = 0, i;
+	int ret = 0, i, idx;
 
 	if (vgic_initialized(kvm))
 		return 0;
@@ -298,6 +291,19 @@ int vgic_init(struct kvm *kvm)
 	if (ret)
 		goto out;
 
+	/* Initialize groups on CPUs created before the VGIC type was known */
+	kvm_for_each_vcpu(idx, vcpu, kvm) {
+		struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
+
+		for (i = 0; i < VGIC_NR_PRIVATE_IRQS; i++) {
+			struct vgic_irq *irq = &vgic_cpu->private_irqs[i];
+			if (dist->vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3)
+				irq->group = 1;
+			else
+				irq->group = 0;
+		}
+	}
+
 	if (vgic_has_its(kvm)) {
 		ret = vgic_v4_init(kvm);
 		if (ret)
-- 
2.19.1


  parent reply	other threads:[~2019-03-11 19:56 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-11 19:54 [PATCH AUTOSEL 4.20 01/52] drm/imx: ignore plane updates on disabled crtcs Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 02/52] gpu: ipu-v3: Fix i.MX51 CSI control registers offset Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 03/52] drm/imx: imx-ldb: add missing of_node_puts Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 04/52] gpu: ipu-v3: Fix CSI offsets for imx53 Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 05/52] ASoC: rt5682: Correct the setting while select ASRC clk for AD/DA filter Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 06/52] clocksource: timer-ti-dm: Fix pwm dmtimer usage of fck reparenting Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 07/52] KVM: arm/arm64: vgic: Make vgic_dist->lpi_list_lock a raw_spinlock Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 08/52] arm64: dts: rockchip: fix graph_port warning on rk3399 bob kevin and excavator Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 09/52] hwmon: (nct6775) Fix fan6 detection for NCT6793D Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 10/52] s390/dasd: fix using offset into zero size array error Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 11/52] Input: pwm-vibra - prevent unbalanced regulator Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 12/52] Input: pwm-vibra - stop regulator after disabling pwm, not before Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 13/52] ARM: dts: Configure clock parent for pwm vibra Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 14/52] ARM: OMAP2+: Variable "reg" in function omap4_dsi_mux_pads() could be uninitialized Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 15/52] ASoC: topology: fix oops/use-after-free case with dai driver Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 16/52] ASoC: dapm: fix out-of-bounds accesses to DAPM lookup tables Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 17/52] ASoC: rsnd: fixup rsnd_ssi_master_clk_start() user count check Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 18/52] KVM: arm/arm64: Reset the VCPU without preemption and vcpu state loaded Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 19/52] arm/arm64: KVM: Allow a VCPU to fully reset itself Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 20/52] arm/arm64: KVM: Don't panic on failure to properly reset system registers Sasha Levin
2019-03-11 19:54 ` Sasha Levin [this message]
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 22/52] KVM: arm64: Forbid kprobing of the VHE world-switch code Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 23/52] ASoC: samsung: Prevent clk_get_rate() calls in atomic context Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 24/52] ARM: OMAP2+: fix lack of timer interrupts on CPU1 after hotplug Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 25/52] Input: cap11xx - switch to using set_brightness_blocking() Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 26/52] Input: ps2-gpio - flush TX work when closing port Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 27/52] Input: matrix_keypad - use flush_delayed_work() Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 28/52] mac80211: call drv_ibss_join() on restart Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 29/52] cfg80211: prevent speculation on cfg80211_classify8021d() return Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 30/52] mac80211: Fix Tx aggregation session tear down with ITXQs Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 31/52] netfilter: compat: initialize all fields in xt_init Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 32/52] blk-mq: insert rq with DONTPREP to hctx dispatch list when requeue Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 33/52] ipvs: fix dependency on nf_defrag_ipv6 Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 34/52] floppy: check_events callback should not return a negative number Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 35/52] xprtrdma: Make sure Send CQ is allocated on an existing compvec Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 36/52] NFS: Don't use page_file_mapping after removing the page Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 37/52] mm/gup: fix gup_pmd_range() for dax Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 38/52] Revert "mm: use early_pfn_to_nid in page_ext_init" Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 39/52] csky: Fixup _PAGE_GLOBAL bit for 610 tlb entry Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 40/52] csky: Fixup wrong pt_regs size Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 41/52] csky: Fixup io-range page attribute for mmap("/dev/mem") Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 42/52] csky: Fixup dead loop in show_stack Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 43/52] scsi: qla2xxx: Fix panic from use after free in qla2x00_async_tm_cmd Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 44/52] net: dsa: bcm_sf2: potential array overflow in bcm_sf2_sw_suspend() Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 45/52] x86/CPU: Add Icelake model number Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 46/52] mm: page_alloc: fix ref bias in page_frag_alloc() for 1-byte allocs Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 47/52] net: hns: Fix object reference leaks in hns_dsaf_roce_reset() Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 48/52] i2c: cadence: Fix the hold bit setting Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 49/52] i2c: bcm2835: Clear current buffer pointers and counts after a transfer Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 50/52] auxdisplay: ht16k33: fix potential user-after-free on module unload Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 51/52] lib/crc32.c: mark crc32_le_base/__crc32c_le_base aliases as __pure Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 52/52] Input: st-keyscan - fix potential zalloc NULL dereference Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190311195516.137772-21-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=christoffer.dall@arm.com \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marc.zyngier@arm.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox