public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Sasha Levin <sashal@kernel.org>,
	linux-input@vger.kernel.org
Subject: [PATCH AUTOSEL 4.20 25/52] Input: cap11xx - switch to using set_brightness_blocking()
Date: Mon, 11 Mar 2019 15:54:49 -0400	[thread overview]
Message-ID: <20190311195516.137772-25-sashal@kernel.org> (raw)
In-Reply-To: <20190311195516.137772-1-sashal@kernel.org>

From: Dmitry Torokhov <dmitry.torokhov@gmail.com>

[ Upstream commit 628442880af8c201d307a45f3862a7a17df8a189 ]

Updating LED state requires access to regmap and therefore we may sleep,
so we could not do that directly form set_brightness() method.
Historically we used private work to adjust the brightness, but with the
introduction of set_brightness_blocking() we no longer need it.

As a bonus, not having our own work item means we do not have
use-after-free issue as we neglected to cancel outstanding work on
driver unbind.

Reported-by: Sven Van Asbroeck <thesven73@gmail.com>
Reviewed-by: Sven Van Asbroeck <TheSven73@googlemail.com>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/keyboard/cap11xx.c | 35 ++++++++++----------------------
 1 file changed, 11 insertions(+), 24 deletions(-)

diff --git a/drivers/input/keyboard/cap11xx.c b/drivers/input/keyboard/cap11xx.c
index 312916f99597..73686c2460ce 100644
--- a/drivers/input/keyboard/cap11xx.c
+++ b/drivers/input/keyboard/cap11xx.c
@@ -75,9 +75,7 @@
 struct cap11xx_led {
 	struct cap11xx_priv *priv;
 	struct led_classdev cdev;
-	struct work_struct work;
 	u32 reg;
-	enum led_brightness new_brightness;
 };
 #endif
 
@@ -233,30 +231,21 @@ static void cap11xx_input_close(struct input_dev *idev)
 }
 
 #ifdef CONFIG_LEDS_CLASS
-static void cap11xx_led_work(struct work_struct *work)
+static int cap11xx_led_set(struct led_classdev *cdev,
+			    enum led_brightness value)
 {
-	struct cap11xx_led *led = container_of(work, struct cap11xx_led, work);
+	struct cap11xx_led *led = container_of(cdev, struct cap11xx_led, cdev);
 	struct cap11xx_priv *priv = led->priv;
-	int value = led->new_brightness;
 
 	/*
-	 * All LEDs share the same duty cycle as this is a HW limitation.
-	 * Brightness levels per LED are either 0 (OFF) and 1 (ON).
+	 * All LEDs share the same duty cycle as this is a HW
+	 * limitation. Brightness levels per LED are either
+	 * 0 (OFF) and 1 (ON).
 	 */
-	regmap_update_bits(priv->regmap, CAP11XX_REG_LED_OUTPUT_CONTROL,
-				BIT(led->reg), value ? BIT(led->reg) : 0);
-}
-
-static void cap11xx_led_set(struct led_classdev *cdev,
-			   enum led_brightness value)
-{
-	struct cap11xx_led *led = container_of(cdev, struct cap11xx_led, cdev);
-
-	if (led->new_brightness == value)
-		return;
-
-	led->new_brightness = value;
-	schedule_work(&led->work);
+	return regmap_update_bits(priv->regmap,
+				  CAP11XX_REG_LED_OUTPUT_CONTROL,
+				  BIT(led->reg),
+				  value ? BIT(led->reg) : 0);
 }
 
 static int cap11xx_init_leds(struct device *dev,
@@ -299,7 +288,7 @@ static int cap11xx_init_leds(struct device *dev,
 		led->cdev.default_trigger =
 			of_get_property(child, "linux,default-trigger", NULL);
 		led->cdev.flags = 0;
-		led->cdev.brightness_set = cap11xx_led_set;
+		led->cdev.brightness_set_blocking = cap11xx_led_set;
 		led->cdev.max_brightness = 1;
 		led->cdev.brightness = LED_OFF;
 
@@ -312,8 +301,6 @@ static int cap11xx_init_leds(struct device *dev,
 		led->reg = reg;
 		led->priv = priv;
 
-		INIT_WORK(&led->work, cap11xx_led_work);
-
 		error = devm_led_classdev_register(dev, &led->cdev);
 		if (error) {
 			of_node_put(child);
-- 
2.19.1


  parent reply	other threads:[~2019-03-11 20:12 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-11 19:54 [PATCH AUTOSEL 4.20 01/52] drm/imx: ignore plane updates on disabled crtcs Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 02/52] gpu: ipu-v3: Fix i.MX51 CSI control registers offset Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 03/52] drm/imx: imx-ldb: add missing of_node_puts Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 04/52] gpu: ipu-v3: Fix CSI offsets for imx53 Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 05/52] ASoC: rt5682: Correct the setting while select ASRC clk for AD/DA filter Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 06/52] clocksource: timer-ti-dm: Fix pwm dmtimer usage of fck reparenting Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 07/52] KVM: arm/arm64: vgic: Make vgic_dist->lpi_list_lock a raw_spinlock Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 08/52] arm64: dts: rockchip: fix graph_port warning on rk3399 bob kevin and excavator Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 09/52] hwmon: (nct6775) Fix fan6 detection for NCT6793D Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 10/52] s390/dasd: fix using offset into zero size array error Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 11/52] Input: pwm-vibra - prevent unbalanced regulator Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 12/52] Input: pwm-vibra - stop regulator after disabling pwm, not before Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 13/52] ARM: dts: Configure clock parent for pwm vibra Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 14/52] ARM: OMAP2+: Variable "reg" in function omap4_dsi_mux_pads() could be uninitialized Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 15/52] ASoC: topology: fix oops/use-after-free case with dai driver Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 16/52] ASoC: dapm: fix out-of-bounds accesses to DAPM lookup tables Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 17/52] ASoC: rsnd: fixup rsnd_ssi_master_clk_start() user count check Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 18/52] KVM: arm/arm64: Reset the VCPU without preemption and vcpu state loaded Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 19/52] arm/arm64: KVM: Allow a VCPU to fully reset itself Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 20/52] arm/arm64: KVM: Don't panic on failure to properly reset system registers Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 21/52] KVM: arm/arm64: vgic: Always initialize the group of private IRQs Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 22/52] KVM: arm64: Forbid kprobing of the VHE world-switch code Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 23/52] ASoC: samsung: Prevent clk_get_rate() calls in atomic context Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 24/52] ARM: OMAP2+: fix lack of timer interrupts on CPU1 after hotplug Sasha Levin
2019-03-11 19:54 ` Sasha Levin [this message]
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 26/52] Input: ps2-gpio - flush TX work when closing port Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 27/52] Input: matrix_keypad - use flush_delayed_work() Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 28/52] mac80211: call drv_ibss_join() on restart Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 29/52] cfg80211: prevent speculation on cfg80211_classify8021d() return Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 30/52] mac80211: Fix Tx aggregation session tear down with ITXQs Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 31/52] netfilter: compat: initialize all fields in xt_init Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 32/52] blk-mq: insert rq with DONTPREP to hctx dispatch list when requeue Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 33/52] ipvs: fix dependency on nf_defrag_ipv6 Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 34/52] floppy: check_events callback should not return a negative number Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 35/52] xprtrdma: Make sure Send CQ is allocated on an existing compvec Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 36/52] NFS: Don't use page_file_mapping after removing the page Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 37/52] mm/gup: fix gup_pmd_range() for dax Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 38/52] Revert "mm: use early_pfn_to_nid in page_ext_init" Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 39/52] csky: Fixup _PAGE_GLOBAL bit for 610 tlb entry Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 40/52] csky: Fixup wrong pt_regs size Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 41/52] csky: Fixup io-range page attribute for mmap("/dev/mem") Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 42/52] csky: Fixup dead loop in show_stack Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 43/52] scsi: qla2xxx: Fix panic from use after free in qla2x00_async_tm_cmd Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 44/52] net: dsa: bcm_sf2: potential array overflow in bcm_sf2_sw_suspend() Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 45/52] x86/CPU: Add Icelake model number Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 46/52] mm: page_alloc: fix ref bias in page_frag_alloc() for 1-byte allocs Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 47/52] net: hns: Fix object reference leaks in hns_dsaf_roce_reset() Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 48/52] i2c: cadence: Fix the hold bit setting Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 49/52] i2c: bcm2835: Clear current buffer pointers and counts after a transfer Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 50/52] auxdisplay: ht16k33: fix potential user-after-free on module unload Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 51/52] lib/crc32.c: mark crc32_le_base/__crc32c_le_base aliases as __pure Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 52/52] Input: st-keyscan - fix potential zalloc NULL dereference Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190311195516.137772-25-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox