From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Julia Lawall <Julia.Lawall@lip6.fr>,
Philipp Zabel <p.zabel@pengutronix.de>,
Sasha Levin <sashal@kernel.org>,
dri-devel@lists.freedesktop.org
Subject: [PATCH AUTOSEL 4.20 03/52] drm/imx: imx-ldb: add missing of_node_puts
Date: Mon, 11 Mar 2019 15:54:27 -0400 [thread overview]
Message-ID: <20190311195516.137772-3-sashal@kernel.org> (raw)
In-Reply-To: <20190311195516.137772-1-sashal@kernel.org>
From: Julia Lawall <Julia.Lawall@lip6.fr>
[ Upstream commit aa3312012f103f91f123600bbf768b11c8f431bc ]
The device node iterators perform an of_node_get on each
iteration, so a jump out of the loop requires an of_node_put.
Move the initialization channel->child = child; down to just
before the call to imx_ldb_register so that intervening failures
don't need to clear it. Add a label at the end of the function to
do all the of_node_puts.
The semantic patch that finds part of this problem is as follows
(http://coccinelle.lip6.fr):
// <smpl>
@@
expression root,e;
local idexpression child;
iterator name for_each_child_of_node;
@@
for_each_child_of_node(root, child) {
... when != of_node_put(child)
when != e = child
(
return child;
|
* return ...;
)
...
}
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/imx/imx-ldb.c | 25 +++++++++++++++++--------
1 file changed, 17 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/imx/imx-ldb.c b/drivers/gpu/drm/imx/imx-ldb.c
index 3bd0f8a18e74..42daa5c9ff8e 100644
--- a/drivers/gpu/drm/imx/imx-ldb.c
+++ b/drivers/gpu/drm/imx/imx-ldb.c
@@ -651,8 +651,10 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data)
int bus_format;
ret = of_property_read_u32(child, "reg", &i);
- if (ret || i < 0 || i > 1)
- return -EINVAL;
+ if (ret || i < 0 || i > 1) {
+ ret = -EINVAL;
+ goto free_child;
+ }
if (!of_device_is_available(child))
continue;
@@ -665,7 +667,6 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data)
channel = &imx_ldb->channel[i];
channel->ldb = imx_ldb;
channel->chno = i;
- channel->child = child;
/*
* The output port is port@4 with an external 4-port mux or
@@ -675,13 +676,13 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data)
imx_ldb->lvds_mux ? 4 : 2, 0,
&channel->panel, &channel->bridge);
if (ret && ret != -ENODEV)
- return ret;
+ goto free_child;
/* panel ddc only if there is no bridge */
if (!channel->bridge) {
ret = imx_ldb_panel_ddc(dev, channel, child);
if (ret)
- return ret;
+ goto free_child;
}
bus_format = of_get_bus_format(dev, child);
@@ -697,18 +698,26 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data)
if (bus_format < 0) {
dev_err(dev, "could not determine data mapping: %d\n",
bus_format);
- return bus_format;
+ ret = bus_format;
+ goto free_child;
}
channel->bus_format = bus_format;
+ channel->child = child;
ret = imx_ldb_register(drm, channel);
- if (ret)
- return ret;
+ if (ret) {
+ channel->child = NULL;
+ goto free_child;
+ }
}
dev_set_drvdata(dev, imx_ldb);
return 0;
+
+free_child:
+ of_node_put(child);
+ return ret;
}
static void imx_ldb_unbind(struct device *dev, struct device *master,
--
2.19.1
next prev parent reply other threads:[~2019-03-11 19:55 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-11 19:54 [PATCH AUTOSEL 4.20 01/52] drm/imx: ignore plane updates on disabled crtcs Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 02/52] gpu: ipu-v3: Fix i.MX51 CSI control registers offset Sasha Levin
2019-03-11 19:54 ` Sasha Levin [this message]
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 04/52] gpu: ipu-v3: Fix CSI offsets for imx53 Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 05/52] ASoC: rt5682: Correct the setting while select ASRC clk for AD/DA filter Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 06/52] clocksource: timer-ti-dm: Fix pwm dmtimer usage of fck reparenting Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 07/52] KVM: arm/arm64: vgic: Make vgic_dist->lpi_list_lock a raw_spinlock Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 08/52] arm64: dts: rockchip: fix graph_port warning on rk3399 bob kevin and excavator Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 09/52] hwmon: (nct6775) Fix fan6 detection for NCT6793D Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 10/52] s390/dasd: fix using offset into zero size array error Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 11/52] Input: pwm-vibra - prevent unbalanced regulator Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 12/52] Input: pwm-vibra - stop regulator after disabling pwm, not before Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 13/52] ARM: dts: Configure clock parent for pwm vibra Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 14/52] ARM: OMAP2+: Variable "reg" in function omap4_dsi_mux_pads() could be uninitialized Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 15/52] ASoC: topology: fix oops/use-after-free case with dai driver Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 16/52] ASoC: dapm: fix out-of-bounds accesses to DAPM lookup tables Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 17/52] ASoC: rsnd: fixup rsnd_ssi_master_clk_start() user count check Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 18/52] KVM: arm/arm64: Reset the VCPU without preemption and vcpu state loaded Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 19/52] arm/arm64: KVM: Allow a VCPU to fully reset itself Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 20/52] arm/arm64: KVM: Don't panic on failure to properly reset system registers Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 21/52] KVM: arm/arm64: vgic: Always initialize the group of private IRQs Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 22/52] KVM: arm64: Forbid kprobing of the VHE world-switch code Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 23/52] ASoC: samsung: Prevent clk_get_rate() calls in atomic context Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 24/52] ARM: OMAP2+: fix lack of timer interrupts on CPU1 after hotplug Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 25/52] Input: cap11xx - switch to using set_brightness_blocking() Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 26/52] Input: ps2-gpio - flush TX work when closing port Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 27/52] Input: matrix_keypad - use flush_delayed_work() Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 28/52] mac80211: call drv_ibss_join() on restart Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 29/52] cfg80211: prevent speculation on cfg80211_classify8021d() return Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 30/52] mac80211: Fix Tx aggregation session tear down with ITXQs Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 31/52] netfilter: compat: initialize all fields in xt_init Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 32/52] blk-mq: insert rq with DONTPREP to hctx dispatch list when requeue Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 33/52] ipvs: fix dependency on nf_defrag_ipv6 Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 34/52] floppy: check_events callback should not return a negative number Sasha Levin
2019-03-11 19:54 ` [PATCH AUTOSEL 4.20 35/52] xprtrdma: Make sure Send CQ is allocated on an existing compvec Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 36/52] NFS: Don't use page_file_mapping after removing the page Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 37/52] mm/gup: fix gup_pmd_range() for dax Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 38/52] Revert "mm: use early_pfn_to_nid in page_ext_init" Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 39/52] csky: Fixup _PAGE_GLOBAL bit for 610 tlb entry Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 40/52] csky: Fixup wrong pt_regs size Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 41/52] csky: Fixup io-range page attribute for mmap("/dev/mem") Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 42/52] csky: Fixup dead loop in show_stack Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 43/52] scsi: qla2xxx: Fix panic from use after free in qla2x00_async_tm_cmd Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 44/52] net: dsa: bcm_sf2: potential array overflow in bcm_sf2_sw_suspend() Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 45/52] x86/CPU: Add Icelake model number Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 46/52] mm: page_alloc: fix ref bias in page_frag_alloc() for 1-byte allocs Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 47/52] net: hns: Fix object reference leaks in hns_dsaf_roce_reset() Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 48/52] i2c: cadence: Fix the hold bit setting Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 49/52] i2c: bcm2835: Clear current buffer pointers and counts after a transfer Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 50/52] auxdisplay: ht16k33: fix potential user-after-free on module unload Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 51/52] lib/crc32.c: mark crc32_le_base/__crc32c_le_base aliases as __pure Sasha Levin
2019-03-11 19:55 ` [PATCH AUTOSEL 4.20 52/52] Input: st-keyscan - fix potential zalloc NULL dereference Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190311195516.137772-3-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=Julia.Lawall@lip6.fr \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox