From: Waiman Long <longman@redhat.com>
To: Peter Zijlstra <peterz@infradead.org>,
Ingo Molnar <mingo@redhat.com>, Will Deacon <will.deacon@arm.com>
Cc: linux-kernel@vger.kernel.org,
Bart Van Assche <bvanassche@acm.org>,
Waiman Long <longman@redhat.com>
Subject: [PATCH v3 1/8] locking/lockdep: Decrement irq context counters when removing lock chain
Date: Wed, 15 Jan 2020 16:43:06 -0500 [thread overview]
Message-ID: <20200115214313.13253-2-longman@redhat.com> (raw)
In-Reply-To: <20200115214313.13253-1-longman@redhat.com>
There are currently three counters to track the irq context of a lock
chain - nr_hardirq_chains, nr_softirq_chains and nr_process_chains.
They are incremented when a new lock chain is added, but they are
not decremented when a lock chain is removed. That causes some of the
statistic counts reported by /proc/lockdep_stats to be incorrect.
Fix that by decrementing the right counter when a lock chain is removed.
Fixes: a0b0fd53e1e6 ("locking/lockdep: Free lock classes that are no longer in use")
Signed-off-by: Waiman Long <longman@redhat.com>
---
kernel/locking/lockdep.c | 36 +++++++++++++++++++++---------
kernel/locking/lockdep_internals.h | 6 +++++
2 files changed, 32 insertions(+), 10 deletions(-)
diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
index 32282e7112d3..b20fa6236b2a 100644
--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -2299,16 +2299,24 @@ static int check_irq_usage(struct task_struct *curr, struct held_lock *prev,
return 0;
}
-static void inc_chains(void)
+static void inc_chains(int irq_context)
{
- if (current->hardirq_context)
+ if (irq_context & LOCK_CHAIN_HARDIRQ_CONTEXT)
nr_hardirq_chains++;
- else {
- if (current->softirq_context)
- nr_softirq_chains++;
- else
- nr_process_chains++;
- }
+ else if (irq_context & LOCK_CHAIN_SOFTIRQ_CONTEXT)
+ nr_softirq_chains++;
+ else
+ nr_process_chains++;
+}
+
+static void dec_chains(int irq_context)
+{
+ if (irq_context & LOCK_CHAIN_HARDIRQ_CONTEXT)
+ nr_hardirq_chains--;
+ else if (irq_context & LOCK_CHAIN_SOFTIRQ_CONTEXT)
+ nr_softirq_chains--;
+ else
+ nr_process_chains--;
}
#else
@@ -2324,6 +2332,10 @@ static inline void inc_chains(void)
nr_process_chains++;
}
+static void dec_chains(int irq_context)
+{
+ nr_process_chains--;
+}
#endif /* CONFIG_TRACE_IRQFLAGS */
static void
@@ -2844,7 +2856,7 @@ static inline int add_chain_cache(struct task_struct *curr,
hlist_add_head_rcu(&chain->entry, hash_head);
debug_atomic_inc(chain_lookup_misses);
- inc_chains();
+ inc_chains(chain->irq_context);
return 1;
}
@@ -3597,7 +3609,8 @@ mark_usage(struct task_struct *curr, struct held_lock *hlock, int check)
static inline unsigned int task_irq_context(struct task_struct *task)
{
- return 2 * !!task->hardirq_context + !!task->softirq_context;
+ return LOCK_CHAIN_HARDIRQ_CONTEXT * !!task->hardirq_context +
+ LOCK_CHAIN_SOFTIRQ_CONTEXT * !!task->softirq_context;
}
static int separate_irq_context(struct task_struct *curr,
@@ -4799,6 +4812,8 @@ static void remove_class_from_lock_chain(struct pending_free *pf,
return;
/* Overwrite the chain key for concurrent RCU readers. */
WRITE_ONCE(chain->chain_key, chain_key);
+ dec_chains(chain->irq_context);
+
/*
* Note: calling hlist_del_rcu() from inside a
* hlist_for_each_entry_rcu() loop is safe.
@@ -4820,6 +4835,7 @@ static void remove_class_from_lock_chain(struct pending_free *pf,
}
*new_chain = *chain;
hlist_add_head_rcu(&new_chain->entry, chainhashentry(chain_key));
+ inc_chains(new_chain->irq_context);
#endif
}
diff --git a/kernel/locking/lockdep_internals.h b/kernel/locking/lockdep_internals.h
index 18d85aebbb57..53500a1dac58 100644
--- a/kernel/locking/lockdep_internals.h
+++ b/kernel/locking/lockdep_internals.h
@@ -98,6 +98,12 @@ static const unsigned long LOCKF_USED_IN_IRQ_READ =
#define MAX_LOCKDEP_CHAINS_BITS 16
+/*
+ * Bit definitions for lock_chain.irq_context
+ */
+#define LOCK_CHAIN_SOFTIRQ_CONTEXT (1 << 0)
+#define LOCK_CHAIN_HARDIRQ_CONTEXT (1 << 1)
+
/*
* Stack-trace: tightly packed array of stack backtrace
* addresses. Protected by the hash_lock.
--
2.18.1
next prev parent reply other threads:[~2020-01-15 21:43 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-15 21:43 [PATCH v3 0/8] locking/lockdep: Reuse zapped chain_hlocks entries Waiman Long
2020-01-15 21:43 ` Waiman Long [this message]
2020-01-16 15:32 ` [PATCH v3 1/8] locking/lockdep: Decrement irq context counters when removing lock chain Peter Zijlstra
2020-01-16 15:50 ` Waiman Long
2020-01-17 18:14 ` kbuild test robot
2020-01-15 21:43 ` [PATCH v3 2/8] locking/lockdep: Display irq_context names in /proc/lockdep_chains Waiman Long
2020-01-17 22:12 ` kbuild test robot
2020-01-15 21:43 ` [PATCH v3 3/8] locking/lockdep: Track number of zapped classes Waiman Long
2020-01-15 21:43 ` [PATCH v3 4/8] locking/lockdep: Throw away all lock chains with zapped class Waiman Long
2020-01-15 21:43 ` [PATCH v3 5/8] locking/lockdep: Track number of zapped lock chains Waiman Long
2020-01-15 21:43 ` [PATCH v3 6/8] locking/lockdep: Reuse freed chain_hlocks entries Waiman Long
2020-01-16 21:13 ` Peter Zijlstra
2020-01-20 4:22 ` Waiman Long
2020-01-17 5:51 ` kbuild test robot
2020-01-15 21:43 ` [PATCH v3 7/8] locking/lockdep: Add lockdep_early_init() before any lock is taken Waiman Long
2020-01-15 21:43 ` [PATCH v3 8/8] locking/lockdep: Enable chain block splitting as last resort Waiman Long
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200115214313.13253-2-longman@redhat.com \
--to=longman@redhat.com \
--cc=bvanassche@acm.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=peterz@infradead.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox