From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Lucas Stach <l.stach@pengutronix.de>
Cc: "David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Anton Lundin <glance@acc.umu.se>, Lukas Wunner <lukas@wunner.de>,
linux-kernel@vger.kernel.org, kernel@pengutronix.de,
netdev@vger.kernel.org
Subject: Re: [PATCH net v1 1/2] net: asix: fix "can't send until first packet is send" issue
Date: Tue, 28 Jun 2022 10:00:08 +0200 [thread overview]
Message-ID: <20220628080008.GF13092@pengutronix.de> (raw)
In-Reply-To: <897594cde5f294f9d5e96917bce1ac751338d0aa.camel@pengutronix.de>
On Tue, Jun 28, 2022 at 09:50:42AM +0200, Lucas Stach wrote:
> Hi Oleksij,
>
> subject of this patch looks strange. It should probably read "can't
> receive until first packet is sent".
rigth. But it is already taken.
> Regards,
> Lucas
>
> Am Dienstag, dem 28.06.2022 um 06:49 +0200 schrieb Oleksij Rempel:
> > On Fri, Jun 24, 2022 at 09:51:38AM +0200, Oleksij Rempel wrote:
> > > If cable is attached after probe sequence, the usbnet framework would
> > > not automatically start processing RX packets except at least one
> > > packet was transmitted.
> > >
> > > On systems with any kind of address auto configuration this issue was
> > > not detected, because some packets are send immediately after link state
> > > is changed to "running".
> > >
> > > With this patch we will notify usbnet about link status change provided by the
> > > PHYlib.
> > >
> > > Fixes: e532a096be0e ("net: usb: asix: ax88772: add phylib support")
> > > Reported-by: Anton Lundin <glance@acc.umu.se>
> > > Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> >
> > In different mail thread Anton reported as tested.
> > Tested-by: Anton Lundin <glance@acc.umu.se>
> >
> > > ---
> > > drivers/net/usb/asix_common.c | 1 +
> > > 1 file changed, 1 insertion(+)
> > >
> > > diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c
> > > index 632fa6c1d5e3..b4a1b7abcfc9 100644
> > > --- a/drivers/net/usb/asix_common.c
> > > +++ b/drivers/net/usb/asix_common.c
> > > @@ -431,6 +431,7 @@ void asix_adjust_link(struct net_device *netdev)
> > >
> > > asix_write_medium_mode(dev, mode, 0);
> > > phy_print_status(phydev);
> > > + usbnet_link_change(dev, phydev->link, 0);
> > > }
> > >
> > > int asix_write_gpio(struct usbnet *dev, u16 value, int sleep, int in_pm)
> > > --
> > > 2.30.2
> > >
> > >
> >
>
>
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2022-06-28 8:00 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-24 7:51 [PATCH net v1 1/2] net: asix: fix "can't send until first packet is send" issue Oleksij Rempel
2022-06-24 7:51 ` [PATCH net v1 2/2] net: usb: asix: do not force pause frames support Oleksij Rempel
2022-06-28 4:49 ` Oleksij Rempel
2022-06-28 4:49 ` [PATCH net v1 1/2] net: asix: fix "can't send until first packet is send" issue Oleksij Rempel
2022-06-28 7:50 ` Lucas Stach
2022-06-28 8:00 ` Oleksij Rempel [this message]
2022-06-28 5:10 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220628080008.GF13092@pengutronix.de \
--to=o.rempel@pengutronix.de \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=glance@acc.umu.se \
--cc=kernel@pengutronix.de \
--cc=kuba@kernel.org \
--cc=l.stach@pengutronix.de \
--cc=linux-kernel@vger.kernel.org \
--cc=lukas@wunner.de \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox