public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Robert Foss <robert.foss@linaro.org>
To: andrzej.hajda@intel.com, narmstrong@baylibre.com,
	robert.foss@linaro.org, Laurent.pinchart@ideasonboard.com,
	jonas@kwiboo.se, jernej.skrabec@gmail.com, airlied@linux.ie,
	daniel@ffwll.ch, dianders@chromium.org,
	dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
	Chris Morgan <macromorgan@hotmail.com>,
	devicetree@vger.kernel.org
Subject: [PATCH v2 1/2] Revert "Revert "drm/bridge: ti-sn65dsi86: Implement bridge connector operations for DP""
Date: Mon, 19 Sep 2022 12:20:08 +0200	[thread overview]
Message-ID: <20220919102009.150503-2-robert.foss@linaro.org> (raw)
In-Reply-To: <20220919102009.150503-1-robert.foss@linaro.org>

This commit was accidentally reverted instead of another commit, and
therefore needs to be reinstated.

This reverts commit 8c9c40ec83445b188fb6b59e119bf5c2de81b02d.

Fixes: 8c9c40ec8344 ("Revert "drm/bridge: ti-sn65dsi86: Implement bridge connector operations for DP"")
Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
 drivers/gpu/drm/bridge/ti-sn65dsi86.c | 28 +++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
index 6e053e2af229..3c3561942eb6 100644
--- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
+++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
@@ -29,6 +29,7 @@
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_bridge.h>
 #include <drm/drm_bridge_connector.h>
+#include <drm/drm_edid.h>
 #include <drm/drm_mipi_dsi.h>
 #include <drm/drm_of.h>
 #include <drm/drm_panel.h>
@@ -68,6 +69,7 @@
 #define  BPP_18_RGB				BIT(0)
 #define SN_HPD_DISABLE_REG			0x5C
 #define  HPD_DISABLE				BIT(0)
+#define  HPD_DEBOUNCED_STATE			BIT(4)
 #define SN_GPIO_IO_REG				0x5E
 #define  SN_GPIO_INPUT_SHIFT			4
 #define  SN_GPIO_OUTPUT_SHIFT			0
@@ -1158,10 +1160,33 @@ static void ti_sn_bridge_atomic_post_disable(struct drm_bridge *bridge,
 	pm_runtime_put_sync(pdata->dev);
 }
 
+static enum drm_connector_status ti_sn_bridge_detect(struct drm_bridge *bridge)
+{
+	struct ti_sn65dsi86 *pdata = bridge_to_ti_sn65dsi86(bridge);
+	int val = 0;
+
+	pm_runtime_get_sync(pdata->dev);
+	regmap_read(pdata->regmap, SN_HPD_DISABLE_REG, &val);
+	pm_runtime_put_autosuspend(pdata->dev);
+
+	return val & HPD_DEBOUNCED_STATE ? connector_status_connected
+					 : connector_status_disconnected;
+}
+
+static struct edid *ti_sn_bridge_get_edid(struct drm_bridge *bridge,
+					  struct drm_connector *connector)
+{
+	struct ti_sn65dsi86 *pdata = bridge_to_ti_sn65dsi86(bridge);
+
+	return drm_get_edid(connector, &pdata->aux.ddc);
+}
+
 static const struct drm_bridge_funcs ti_sn_bridge_funcs = {
 	.attach = ti_sn_bridge_attach,
 	.detach = ti_sn_bridge_detach,
 	.mode_valid = ti_sn_bridge_mode_valid,
+	.get_edid = ti_sn_bridge_get_edid,
+	.detect = ti_sn_bridge_detect,
 	.atomic_pre_enable = ti_sn_bridge_atomic_pre_enable,
 	.atomic_enable = ti_sn_bridge_atomic_enable,
 	.atomic_disable = ti_sn_bridge_atomic_disable,
@@ -1257,6 +1282,9 @@ static int ti_sn_bridge_probe(struct auxiliary_device *adev,
 	pdata->bridge.type = pdata->next_bridge->type == DRM_MODE_CONNECTOR_DisplayPort
 			   ? DRM_MODE_CONNECTOR_DisplayPort : DRM_MODE_CONNECTOR_eDP;
 
+	if (pdata->bridge.type == DRM_MODE_CONNECTOR_DisplayPort)
+		pdata->bridge.ops = DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_DETECT;
+
 	drm_bridge_add(&pdata->bridge);
 
 	ret = ti_sn_attach_host(pdata);
-- 
2.34.1


  reply	other threads:[~2022-09-19 10:36 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-19 10:20 [PATCH v2 0/2] Fix chrontel-ch7033 reversion Robert Foss
2022-09-19 10:20 ` Robert Foss [this message]
2022-09-19 10:43   ` [PATCH v2 1/2] Revert "Revert "drm/bridge: ti-sn65dsi86: Implement bridge connector operations for DP"" Laurent Pinchart
2022-09-19 10:20 ` [PATCH v2 2/2] Revert "drm/bridge: chrontel-ch7033: Add byteswap order setting" Robert Foss
2022-09-19 10:47   ` Laurent Pinchart
2022-09-19 13:18     ` Robert Foss

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220919102009.150503-2-robert.foss@linaro.org \
    --to=robert.foss@linaro.org \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=airlied@linux.ie \
    --cc=andrzej.hajda@intel.com \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jernej.skrabec@gmail.com \
    --cc=jonas@kwiboo.se \
    --cc=linux-kernel@vger.kernel.org \
    --cc=macromorgan@hotmail.com \
    --cc=narmstrong@baylibre.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox