From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Robert Foss <robert.foss@linaro.org>
Cc: andrzej.hajda@intel.com, narmstrong@baylibre.com,
jonas@kwiboo.se, jernej.skrabec@gmail.com, airlied@linux.ie,
daniel@ffwll.ch, dianders@chromium.org,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
Chris Morgan <macromorgan@hotmail.com>,
devicetree@vger.kernel.org
Subject: Re: [PATCH v2 1/2] Revert "Revert "drm/bridge: ti-sn65dsi86: Implement bridge connector operations for DP""
Date: Mon, 19 Sep 2022 13:43:29 +0300 [thread overview]
Message-ID: <YyhH0cENOBZfeu64@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20220919102009.150503-2-robert.foss@linaro.org>
Hi Rob,
Thank you for the patch.
On Mon, Sep 19, 2022 at 12:20:08PM +0200, Robert Foss wrote:
> This commit was accidentally reverted instead of another commit, and
> therefore needs to be reinstated.
>
> This reverts commit 8c9c40ec83445b188fb6b59e119bf5c2de81b02d.
>
> Fixes: 8c9c40ec8344 ("Revert "drm/bridge: ti-sn65dsi86: Implement bridge connector operations for DP"")
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> drivers/gpu/drm/bridge/ti-sn65dsi86.c | 28 +++++++++++++++++++++++++++
> 1 file changed, 28 insertions(+)
>
> diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> index 6e053e2af229..3c3561942eb6 100644
> --- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> +++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> @@ -29,6 +29,7 @@
> #include <drm/drm_atomic_helper.h>
> #include <drm/drm_bridge.h>
> #include <drm/drm_bridge_connector.h>
> +#include <drm/drm_edid.h>
> #include <drm/drm_mipi_dsi.h>
> #include <drm/drm_of.h>
> #include <drm/drm_panel.h>
> @@ -68,6 +69,7 @@
> #define BPP_18_RGB BIT(0)
> #define SN_HPD_DISABLE_REG 0x5C
> #define HPD_DISABLE BIT(0)
> +#define HPD_DEBOUNCED_STATE BIT(4)
> #define SN_GPIO_IO_REG 0x5E
> #define SN_GPIO_INPUT_SHIFT 4
> #define SN_GPIO_OUTPUT_SHIFT 0
> @@ -1158,10 +1160,33 @@ static void ti_sn_bridge_atomic_post_disable(struct drm_bridge *bridge,
> pm_runtime_put_sync(pdata->dev);
> }
>
> +static enum drm_connector_status ti_sn_bridge_detect(struct drm_bridge *bridge)
> +{
> + struct ti_sn65dsi86 *pdata = bridge_to_ti_sn65dsi86(bridge);
> + int val = 0;
> +
> + pm_runtime_get_sync(pdata->dev);
> + regmap_read(pdata->regmap, SN_HPD_DISABLE_REG, &val);
> + pm_runtime_put_autosuspend(pdata->dev);
> +
> + return val & HPD_DEBOUNCED_STATE ? connector_status_connected
> + : connector_status_disconnected;
> +}
> +
> +static struct edid *ti_sn_bridge_get_edid(struct drm_bridge *bridge,
> + struct drm_connector *connector)
> +{
> + struct ti_sn65dsi86 *pdata = bridge_to_ti_sn65dsi86(bridge);
> +
> + return drm_get_edid(connector, &pdata->aux.ddc);
> +}
> +
> static const struct drm_bridge_funcs ti_sn_bridge_funcs = {
> .attach = ti_sn_bridge_attach,
> .detach = ti_sn_bridge_detach,
> .mode_valid = ti_sn_bridge_mode_valid,
> + .get_edid = ti_sn_bridge_get_edid,
> + .detect = ti_sn_bridge_detect,
> .atomic_pre_enable = ti_sn_bridge_atomic_pre_enable,
> .atomic_enable = ti_sn_bridge_atomic_enable,
> .atomic_disable = ti_sn_bridge_atomic_disable,
> @@ -1257,6 +1282,9 @@ static int ti_sn_bridge_probe(struct auxiliary_device *adev,
> pdata->bridge.type = pdata->next_bridge->type == DRM_MODE_CONNECTOR_DisplayPort
> ? DRM_MODE_CONNECTOR_DisplayPort : DRM_MODE_CONNECTOR_eDP;
>
> + if (pdata->bridge.type == DRM_MODE_CONNECTOR_DisplayPort)
> + pdata->bridge.ops = DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_DETECT;
> +
> drm_bridge_add(&pdata->bridge);
>
> ret = ti_sn_attach_host(pdata);
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2022-09-19 10:50 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-19 10:20 [PATCH v2 0/2] Fix chrontel-ch7033 reversion Robert Foss
2022-09-19 10:20 ` [PATCH v2 1/2] Revert "Revert "drm/bridge: ti-sn65dsi86: Implement bridge connector operations for DP"" Robert Foss
2022-09-19 10:43 ` Laurent Pinchart [this message]
2022-09-19 10:20 ` [PATCH v2 2/2] Revert "drm/bridge: chrontel-ch7033: Add byteswap order setting" Robert Foss
2022-09-19 10:47 ` Laurent Pinchart
2022-09-19 13:18 ` Robert Foss
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YyhH0cENOBZfeu64@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=airlied@linux.ie \
--cc=andrzej.hajda@intel.com \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jernej.skrabec@gmail.com \
--cc=jonas@kwiboo.se \
--cc=linux-kernel@vger.kernel.org \
--cc=macromorgan@hotmail.com \
--cc=narmstrong@baylibre.com \
--cc=robert.foss@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox