[PATCH AUTOSEL 6.0 01/73] drm/etnaviv: add missing quirks for GC300

[PATCH AUTOSEL 6.0 01/73] drm/etnaviv: add missing quirks for GC300

[Sasha Levin]

From: Doug Brown <doug@schmorgal.com>

[ Upstream commit cc7d3fb446a91f24978a6aa59cbb578f92e22242 ]

The GC300's features register doesn't specify that a 2D pipe is
available, and like the GC600, its idle register reports zero bits where
modules aren't present.

Signed-off-by: Doug Brown <doug@schmorgal.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/etnaviv/etnaviv_gpu.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
index 37018bc55810..f667e7906d1f 100644
--- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
+++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
@@ -416,6 +416,12 @@ static void etnaviv_hw_identify(struct etnaviv_gpu *gpu)
 	if (gpu->identity.model == chipModel_GC700)
 		gpu->identity.features &= ~chipFeatures_FAST_CLEAR;
 
+	/* These models/revisions don't have the 2D pipe bit */
+	if ((gpu->identity.model == chipModel_GC500 &&
+	     gpu->identity.revision <= 2) ||
+	    gpu->identity.model == chipModel_GC300)
+		gpu->identity.features |= chipFeatures_PIPE_2D;
+
 	if ((gpu->identity.model == chipModel_GC500 &&
 	     gpu->identity.revision < 2) ||
 	    (gpu->identity.model == chipModel_GC300 &&
@@ -449,8 +455,9 @@ static void etnaviv_hw_identify(struct etnaviv_gpu *gpu)
 				gpu_read(gpu, VIVS_HI_CHIP_MINOR_FEATURE_5);
 	}
 
-	/* GC600 idle register reports zero bits where modules aren't present */
-	if (gpu->identity.model == chipModel_GC600)
+	/* GC600/300 idle register reports zero bits where modules aren't present */
+	if (gpu->identity.model == chipModel_GC600 ||
+	    gpu->identity.model == chipModel_GC300)
 		gpu->idle_mask = VIVS_HI_IDLE_STATE_TX |
 				 VIVS_HI_IDLE_STATE_RA |
 				 VIVS_HI_IDLE_STATE_SE |
-- 
2.35.1

[PATCH AUTOSEL 6.0 02/73] media: imx-jpeg: Disable useless interrupt to avoid kernel panic

[Sasha Levin]

From: Ming Qian <ming.qian@nxp.com>

[ Upstream commit c3720e65c9013a7b2a5dbb63e6bf6d74a35dd894 ]

There is a hardware bug that the interrupt STMBUF_HALF may be triggered
after or when disable interrupt.
It may led to unexpected kernel panic.
And interrupt STMBUF_HALF and STMBUF_RTND have no other effect.
So disable them and the unused interrupts.

meanwhile clear the interrupt status when disable interrupt.

Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.c b/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.c
index 9418fcf740a8..ef28122a5ed4 100644
--- a/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.c
+++ b/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.c
@@ -76,12 +76,14 @@ void print_wrapper_info(struct device *dev, void __iomem *reg)
 
 void mxc_jpeg_enable_irq(void __iomem *reg, int slot)
 {
-	writel(0xFFFFFFFF, reg + MXC_SLOT_OFFSET(slot, SLOT_IRQ_EN));
+	writel(0xFFFFFFFF, reg + MXC_SLOT_OFFSET(slot, SLOT_STATUS));
+	writel(0xF0C, reg + MXC_SLOT_OFFSET(slot, SLOT_IRQ_EN));
 }
 
 void mxc_jpeg_disable_irq(void __iomem *reg, int slot)
 {
 	writel(0x0, reg + MXC_SLOT_OFFSET(slot, SLOT_IRQ_EN));
+	writel(0xFFFFFFFF, reg + MXC_SLOT_OFFSET(slot, SLOT_STATUS));
 }
 
 void mxc_jpeg_sw_reset(void __iomem *reg)
-- 
2.35.1

[PATCH AUTOSEL 6.0 03/73] brcmfmac: return error when getting invalid max_flowrings from dongle

[Sasha Levin]

From: Wright Feng <wright.feng@cypress.com>

[ Upstream commit 2aca4f3734bd717e04943ddf340d49ab62299a00 ]

When firmware hit trap at initialization, host will read abnormal
max_flowrings number from dongle, and it will cause kernel panic when
doing iowrite to initialize dongle ring.
To detect this error at early stage, we directly return error when getting
invalid max_flowrings(>256).

Signed-off-by: Wright Feng <wright.feng@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Ian Lin <ian.lin@infineon.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220929031001.9962-3-ian.lin@infineon.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
index 97f0f13dfe50..cdb8b9460414 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -1120,6 +1120,10 @@ static int brcmf_pcie_init_ringbuffers(struct brcmf_pciedev_info *devinfo)
 				BRCMF_NROF_H2D_COMMON_MSGRINGS;
 		max_completionrings = BRCMF_NROF_D2H_COMMON_MSGRINGS;
 	}
+	if (max_flowrings > 256) {
+		brcmf_err(bus, "invalid max_flowrings(%d)\n", max_flowrings);
+		return -EIO;
+	}
 
 	if (devinfo->dma_idx_sz != 0) {
 		bufsz = (max_submissionrings + max_completionrings) *
-- 
2.35.1

[PATCH AUTOSEL 6.0 04/73] wifi: ath9k: verify the expected usb_endpoints are present

[Sasha Levin]

From: Fedor Pchelkin <pchelkin@ispras.ru>

[ Upstream commit 16ef02bad239f11f322df8425d302be62f0443ce ]

The bug arises when a USB device claims to be an ATH9K but doesn't
have the expected endpoints. (In this case there was an interrupt
endpoint where the driver expected a bulk endpoint.) The kernel
needs to be able to handle such devices without getting an internal error.

usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 3 PID: 500 at drivers/usb/core/urb.c:493 usb_submit_urb+0xce2/0x1430 drivers/usb/core/urb.c:493
Modules linked in:
CPU: 3 PID: 500 Comm: kworker/3:2 Not tainted 5.10.135-syzkaller #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Workqueue: events request_firmware_work_func
RIP: 0010:usb_submit_urb+0xce2/0x1430 drivers/usb/core/urb.c:493
Call Trace:
 ath9k_hif_usb_alloc_rx_urbs drivers/net/wireless/ath/ath9k/hif_usb.c:908 [inline]
 ath9k_hif_usb_alloc_urbs+0x75e/0x1010 drivers/net/wireless/ath/ath9k/hif_usb.c:1019
 ath9k_hif_usb_dev_init drivers/net/wireless/ath/ath9k/hif_usb.c:1109 [inline]
 ath9k_hif_usb_firmware_cb+0x142/0x530 drivers/net/wireless/ath/ath9k/hif_usb.c:1242
 request_firmware_work_func+0x12e/0x240 drivers/base/firmware_loader/main.c:1097
 process_one_work+0x9af/0x1600 kernel/workqueue.c:2279
 worker_thread+0x61d/0x12f0 kernel/workqueue.c:2425
 kthread+0x3b4/0x4a0 kernel/kthread.c:313
 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:299

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221008211532.74583-1-pchelkin@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/hif_usb.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index 4d9002a9d082..1ffd6cd5dceb 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -1329,10 +1329,24 @@ static int send_eject_command(struct usb_interface *interface)
 static int ath9k_hif_usb_probe(struct usb_interface *interface,
 			       const struct usb_device_id *id)
 {
+	struct usb_endpoint_descriptor *bulk_in, *bulk_out, *int_in, *int_out;
 	struct usb_device *udev = interface_to_usbdev(interface);
+	struct usb_host_interface *alt;
 	struct hif_device_usb *hif_dev;
 	int ret = 0;
 
+	/* Verify the expected endpoints are present */
+	alt = interface->cur_altsetting;
+	if (usb_find_common_endpoints(alt, &bulk_in, &bulk_out, &int_in, &int_out) < 0 ||
+	    usb_endpoint_num(bulk_in) != USB_WLAN_RX_PIPE ||
+	    usb_endpoint_num(bulk_out) != USB_WLAN_TX_PIPE ||
+	    usb_endpoint_num(int_in) != USB_REG_IN_PIPE ||
+	    usb_endpoint_num(int_out) != USB_REG_OUT_PIPE) {
+		dev_err(&udev->dev,
+			"ath9k_htc: Device endpoint numbers are not the expected ones\n");
+		return -ENODEV;
+	}
+
 	if (id->driver_info == STORAGE_DEVICE)
 		return send_eject_command(interface);
 
-- 
2.35.1

[PATCH AUTOSEL 6.0 05/73] wifi: ar5523: Fix use-after-free on ar5523_cmd() timed out

[Sasha Levin]

From: Shigeru Yoshida <syoshida@redhat.com>

[ Upstream commit b6702a942a069c2a975478d719e98d83cdae1797 ]

syzkaller reported use-after-free with the stack trace like below [1]:

[   38.960489][    C3] ==================================================================
[   38.963216][    C3] BUG: KASAN: use-after-free in ar5523_cmd_tx_cb+0x220/0x240
[   38.964950][    C3] Read of size 8 at addr ffff888048e03450 by task swapper/3/0
[   38.966363][    C3]
[   38.967053][    C3] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.0.0-09039-ga6afa4199d3d-dirty #18
[   38.968464][    C3] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
[   38.969959][    C3] Call Trace:
[   38.970841][    C3]  <IRQ>
[   38.971663][    C3]  dump_stack_lvl+0xfc/0x174
[   38.972620][    C3]  print_report.cold+0x2c3/0x752
[   38.973626][    C3]  ? ar5523_cmd_tx_cb+0x220/0x240
[   38.974644][    C3]  kasan_report+0xb1/0x1d0
[   38.975720][    C3]  ? ar5523_cmd_tx_cb+0x220/0x240
[   38.976831][    C3]  ar5523_cmd_tx_cb+0x220/0x240
[   38.978412][    C3]  __usb_hcd_giveback_urb+0x353/0x5b0
[   38.979755][    C3]  usb_hcd_giveback_urb+0x385/0x430
[   38.981266][    C3]  dummy_timer+0x140c/0x34e0
[   38.982925][    C3]  ? notifier_call_chain+0xb5/0x1e0
[   38.984761][    C3]  ? rcu_read_lock_sched_held+0xb/0x60
[   38.986242][    C3]  ? lock_release+0x51c/0x790
[   38.987323][    C3]  ? _raw_read_unlock_irqrestore+0x37/0x70
[   38.988483][    C3]  ? __wake_up_common_lock+0xde/0x130
[   38.989621][    C3]  ? reacquire_held_locks+0x4a0/0x4a0
[   38.990777][    C3]  ? lock_acquire+0x472/0x550
[   38.991919][    C3]  ? rcu_read_lock_sched_held+0xb/0x60
[   38.993138][    C3]  ? lock_acquire+0x472/0x550
[   38.994890][    C3]  ? dummy_urb_enqueue+0x860/0x860
[   38.996266][    C3]  ? do_raw_spin_unlock+0x16f/0x230
[   38.997670][    C3]  ? dummy_urb_enqueue+0x860/0x860
[   38.999116][    C3]  call_timer_fn+0x1a0/0x6a0
[   39.000668][    C3]  ? add_timer_on+0x4a0/0x4a0
[   39.002137][    C3]  ? reacquire_held_locks+0x4a0/0x4a0
[   39.003809][    C3]  ? __next_timer_interrupt+0x226/0x2a0
[   39.005509][    C3]  __run_timers.part.0+0x69a/0xac0
[   39.007025][    C3]  ? dummy_urb_enqueue+0x860/0x860
[   39.008716][    C3]  ? call_timer_fn+0x6a0/0x6a0
[   39.010254][    C3]  ? cpuacct_percpu_seq_show+0x10/0x10
[   39.011795][    C3]  ? kvm_sched_clock_read+0x14/0x40
[   39.013277][    C3]  ? sched_clock_cpu+0x69/0x2b0
[   39.014724][    C3]  run_timer_softirq+0xb6/0x1d0
[   39.016196][    C3]  __do_softirq+0x1d2/0x9be
[   39.017616][    C3]  __irq_exit_rcu+0xeb/0x190
[   39.019004][    C3]  irq_exit_rcu+0x5/0x20
[   39.020361][    C3]  sysvec_apic_timer_interrupt+0x8f/0xb0
[   39.021965][    C3]  </IRQ>
[   39.023237][    C3]  <TASK>

In ar5523_probe(), ar5523_host_available() calls ar5523_cmd() as below
(there are other functions which finally call ar5523_cmd()):

ar5523_probe()
-> ar5523_host_available()
   -> ar5523_cmd_read()
      -> ar5523_cmd()

If ar5523_cmd() timed out, then ar5523_host_available() failed and
ar5523_probe() freed the device structure.  So, ar5523_cmd_tx_cb()
might touch the freed structure.

This patch fixes this issue by canceling in-flight tx cmd if submitted
urb timed out.

Link: https://syzkaller.appspot.com/bug?id=9e12b2d54300842b71bdd18b54971385ff0d0d3a [1]
Reported-by: syzbot+95001b1fd6dfcc716c29@syzkaller.appspotmail.com
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221009183223.420015-1-syoshida@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ar5523/ar5523.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/wireless/ath/ar5523/ar5523.c b/drivers/net/wireless/ath/ar5523/ar5523.c
index 6f937d2cc126..ce3d613fa36c 100644
--- a/drivers/net/wireless/ath/ar5523/ar5523.c
+++ b/drivers/net/wireless/ath/ar5523/ar5523.c
@@ -241,6 +241,11 @@ static void ar5523_cmd_tx_cb(struct urb *urb)
 	}
 }
 
+static void ar5523_cancel_tx_cmd(struct ar5523 *ar)
+{
+	usb_kill_urb(ar->tx_cmd.urb_tx);
+}
+
 static int ar5523_cmd(struct ar5523 *ar, u32 code, const void *idata,
 		      int ilen, void *odata, int olen, int flags)
 {
@@ -280,6 +285,7 @@ static int ar5523_cmd(struct ar5523 *ar, u32 code, const void *idata,
 	}
 
 	if (!wait_for_completion_timeout(&cmd->done, 2 * HZ)) {
+		ar5523_cancel_tx_cmd(ar);
 		cmd->odata = NULL;
 		ar5523_err(ar, "timeout waiting for command %02x reply\n",
 			   code);
-- 
2.35.1

[PATCH AUTOSEL 6.0 06/73] ASoC: codecs: rt298: Add quirk for KBL-R RVP platform

[Sasha Levin]

From: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>

[ Upstream commit 953dbd1cef18ce9ac0d69c1bd735b929fe52a17e ]

KBL-R RVP platforms also use combojack, so we need to enable that
configuration for them.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt298.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/sound/soc/codecs/rt298.c b/sound/soc/codecs/rt298.c
index b0b53d4f07df..5f36064ed6e6 100644
--- a/sound/soc/codecs/rt298.c
+++ b/sound/soc/codecs/rt298.c
@@ -1166,6 +1166,13 @@ static const struct dmi_system_id force_combo_jack_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Geminilake")
 		}
 	},
+	{
+		.ident = "Intel Kabylake R RVP",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Intel Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Kabylake Client platform")
+		}
+	},
 	{ }
 };
 
-- 
2.35.1

[PATCH AUTOSEL 6.0 07/73] ASoC: Intel: avs: Add quirk for KBL-R RVP platform

[Sasha Levin]

From: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>

[ Upstream commit 9d0737fa0e7530313634c0ecd75f09a95ba8d44a ]

KBL-R RVPs contain built-in rt298 codec which requires different PLL
clock and .dai_fmt configuration than seen on other boards.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/avs/boards/rt298.c | 24 ++++++++++++++++++++++--
 1 file changed, 22 insertions(+), 2 deletions(-)

diff --git a/sound/soc/intel/avs/boards/rt298.c b/sound/soc/intel/avs/boards/rt298.c
index b28d36872dcb..58c9d9edecf0 100644
--- a/sound/soc/intel/avs/boards/rt298.c
+++ b/sound/soc/intel/avs/boards/rt298.c
@@ -6,6 +6,7 @@
 //          Amadeusz Slawinski <amadeuszx.slawinski@linux.intel.com>
 //
 
+#include <linux/dmi.h>
 #include <linux/module.h>
 #include <sound/jack.h>
 #include <sound/pcm.h>
@@ -14,6 +15,16 @@
 #include <sound/soc-acpi.h>
 #include "../../../codecs/rt298.h"
 
+static const struct dmi_system_id kblr_dmi_table[] = {
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Intel Corporation"),
+			DMI_MATCH(DMI_BOARD_NAME, "Kabylake R DDR4 RVP"),
+		},
+	},
+	{}
+};
+
 static const struct snd_kcontrol_new card_controls[] = {
 	SOC_DAPM_PIN_SWITCH("Headphone Jack"),
 	SOC_DAPM_PIN_SWITCH("Mic Jack"),
@@ -96,9 +107,15 @@ avs_rt298_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_param
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	unsigned int clk_freq;
 	int ret;
 
-	ret = snd_soc_dai_set_sysclk(codec_dai, RT298_SCLK_S_PLL, 19200000, SND_SOC_CLOCK_IN);
+	if (dmi_first_match(kblr_dmi_table))
+		clk_freq = 24000000;
+	else
+		clk_freq = 19200000;
+
+	ret = snd_soc_dai_set_sysclk(codec_dai, RT298_SCLK_S_PLL, clk_freq, SND_SOC_CLOCK_IN);
 	if (ret < 0)
 		dev_err(rtd->dev, "Set codec sysclk failed: %d\n", ret);
 
@@ -139,7 +156,10 @@ static int avs_create_dai_link(struct device *dev, const char *platform_name, in
 	dl->platforms = platform;
 	dl->num_platforms = 1;
 	dl->id = 0;
-	dl->dai_fmt = SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS;
+	if (dmi_first_match(kblr_dmi_table))
+		dl->dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS;
+	else
+		dl->dai_fmt = SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS;
 	dl->init = avs_rt298_codec_init;
 	dl->be_hw_params_fixup = avs_rt298_be_fixup;
 	dl->ops = &avs_rt298_ops;
-- 
2.35.1

[PATCH AUTOSEL 6.0 08/73] ipmi: fix memleak when unload ipmi driver

[Sasha Levin]

From: Zhang Yuchen <zhangyuchen.lcr@bytedance.com>

[ Upstream commit 36992eb6b9b83f7f9cdc8e74fb5799d7b52e83e9 ]

After the IPMI disconnect problem, the memory kept rising and we tried
to unload the driver to free the memory. However, only part of the
free memory is recovered after the driver is uninstalled. Using
ebpf to hook free functions, we find that neither ipmi_user nor
ipmi_smi_msg is free, only ipmi_recv_msg is free.

We find that the deliver_smi_err_response call in clean_smi_msgs does
the destroy processing on each message from the xmit_msg queue without
checking the return value and free ipmi_smi_msg.

deliver_smi_err_response is called only at this location. Adding the
free handling has no effect.

To verify, try using ebpf to trace the free function.

  $ bpftrace -e 'kretprobe:ipmi_alloc_recv_msg {printf("alloc rcv
      %p\n",retval);} kprobe:free_recv_msg {printf("free recv %p\n",
      arg0)} kretprobe:ipmi_alloc_smi_msg {printf("alloc smi %p\n",
        retval);} kprobe:free_smi_msg {printf("free smi  %p\n",arg0)}'

Signed-off-by: Zhang Yuchen <zhangyuchen.lcr@bytedance.com>
Message-Id: <20221007092617.87597-4-zhangyuchen.lcr@bytedance.com>
[Fixed the comment above handle_one_recv_msg().]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/ipmi/ipmi_msghandler.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index 703433493c85..c9e32d100b7e 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -3710,12 +3710,16 @@ static void deliver_smi_err_response(struct ipmi_smi *intf,
 				     struct ipmi_smi_msg *msg,
 				     unsigned char err)
 {
+	int rv;
 	msg->rsp[0] = msg->data[0] | 4;
 	msg->rsp[1] = msg->data[1];
 	msg->rsp[2] = err;
 	msg->rsp_size = 3;
-	/* It's an error, so it will never requeue, no need to check return. */
-	handle_one_recv_msg(intf, msg);
+
+	/* This will never requeue, but it may ask us to free the message. */
+	rv = handle_one_recv_msg(intf, msg);
+	if (rv == 0)
+		ipmi_free_smi_msg(msg);
 }
 
 static void cleanup_smi_msgs(struct ipmi_smi *intf)
-- 
2.35.1

[PATCH AUTOSEL 6.0 09/73] wifi: ath10k: Delay the unmapping of the buffer

[Sasha Levin]

From: Youghandhar Chintala <quic_youghand@quicinc.com>

[ Upstream commit acd4324e5f1f11351630234297f95076f0ac9a2f ]

On WCN3990, we are seeing a rare scenario where copy engine hardware is
sending a copy complete interrupt to the host driver while still
processing the buffer that the driver has sent, this is leading into an
SMMU fault triggering kernel panic. This is happening on copy engine
channel 3 (CE3) where the driver normally enqueues WMI commands to the
firmware. Upon receiving a copy complete interrupt, host driver will
immediately unmap and frees the buffer presuming that hardware has
processed the buffer. In the issue case, upon receiving copy complete
interrupt, host driver will unmap and free the buffer but since hardware
is still accessing the buffer (which in this case got unmapped in
parallel), SMMU hardware will trigger an SMMU fault resulting in a
kernel panic.

In order to avoid this, as a work around, add a delay before unmapping
the copy engine source DMA buffer. This is conditionally done for
WCN3990 and only for the CE3 channel where issue is seen.

Below is the crash signature:

wifi smmu error: kernel: [ 10.120965] arm-smmu 15000000.iommu: Unhandled
context fault: fsr=0x402, iova=0x7fdfd8ac0,
fsynr=0x500003,cbfrsynra=0xc1, cb=6 arm-smmu 15000000.iommu: Unhandled
context fault:fsr=0x402, iova=0x7fe06fdc0, fsynr=0x710003,
cbfrsynra=0xc1, cb=6 qcom-q6v5-mss 4080000.remoteproc: fatal error
received: err_qdi.c:1040:EF:wlan_process:0x1:WLAN RT:0x2091:
cmnos_thread.c:3998:Asserted in copy_engine.c:AXI_ERROR_DETECTED:2149
remoteproc remoteproc0: crash detected in
4080000.remoteproc: type fatal error <3> remoteproc remoteproc0:
handling crash #1 in 4080000.remoteproc

pc : __arm_lpae_unmap+0x500/0x514
lr : __arm_lpae_unmap+0x4bc/0x514
sp : ffffffc011ffb530
x29: ffffffc011ffb590 x28: 0000000000000000
x27: 0000000000000000 x26: 0000000000000004
x25: 0000000000000003 x24: ffffffc011ffb890
x23: ffffffa762ef9be0 x22: ffffffa77244ef00
x21: 0000000000000009 x20: 00000007fff7c000
x19: 0000000000000003 x18: 0000000000000000
x17: 0000000000000004 x16: ffffffd7a357d9f0
x15: 0000000000000000 x14: 00fd5d4fa7ffffff
x13: 000000000000000e x12: 0000000000000000
x11: 00000000ffffffff x10: 00000000fffffe00
x9 : 000000000000017c x8 : 000000000000000c
x7 : 0000000000000000 x6 : ffffffa762ef9000
x5 : 0000000000000003 x4 : 0000000000000004
x3 : 0000000000001000 x2 : 00000007fff7c000
x1 : ffffffc011ffb890 x0 : 0000000000000000 Call trace:
__arm_lpae_unmap+0x500/0x514
__arm_lpae_unmap+0x4bc/0x514
__arm_lpae_unmap+0x4bc/0x514
arm_lpae_unmap_pages+0x78/0xa4
arm_smmu_unmap_pages+0x78/0x104
__iommu_unmap+0xc8/0x1e4
iommu_unmap_fast+0x38/0x48
__iommu_dma_unmap+0x84/0x104
iommu_dma_free+0x34/0x50
dma_free_attrs+0xa4/0xd0
ath10k_htt_rx_free+0xc4/0xf4 [ath10k_core] ath10k_core_stop+0x64/0x7c
[ath10k_core]
ath10k_halt+0x11c/0x180 [ath10k_core]
ath10k_stop+0x54/0x94 [ath10k_core]
drv_stop+0x48/0x1c8 [mac80211]
ieee80211_do_open+0x638/0x77c [mac80211] ieee80211_open+0x48/0x5c
[mac80211]
__dev_open+0xb4/0x174
__dev_change_flags+0xc4/0x1dc
dev_change_flags+0x3c/0x7c
devinet_ioctl+0x2b4/0x580
inet_ioctl+0xb0/0x1b4
sock_do_ioctl+0x4c/0x16c
compat_ifreq_ioctl+0x1cc/0x35c
compat_sock_ioctl+0x110/0x2ac
__arm64_compat_sys_ioctl+0xf4/0x3e0
el0_svc_common+0xb4/0x17c
el0_svc_compat_handler+0x2c/0x58
el0_svc_compat+0x8/0x2c

Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1

Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Youghandhar Chintala <quic_youghand@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221012142733.32420-1-quic_youghand@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/core.c | 16 ++++++++++++++++
 drivers/net/wireless/ath/ath10k/htc.c  |  9 +++++++++
 drivers/net/wireless/ath/ath10k/hw.h   |  2 ++
 3 files changed, 27 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index d1ac64026cb3..9a8ea7231a9e 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -99,6 +99,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.dynamic_sar_support = false,
 		.hw_restart_disconnect = false,
 		.use_fw_tx_credits = true,
+		.delay_unmap_buffer = false,
 	},
 	{
 		.id = QCA988X_HW_2_0_VERSION,
@@ -138,6 +139,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.dynamic_sar_support = false,
 		.hw_restart_disconnect = false,
 		.use_fw_tx_credits = true,
+		.delay_unmap_buffer = false,
 	},
 	{
 		.id = QCA9887_HW_1_0_VERSION,
@@ -178,6 +180,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.dynamic_sar_support = false,
 		.hw_restart_disconnect = false,
 		.use_fw_tx_credits = true,
+		.delay_unmap_buffer = false,
 	},
 	{
 		.id = QCA6174_HW_3_2_VERSION,
@@ -213,6 +216,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.dynamic_sar_support = true,
 		.hw_restart_disconnect = false,
 		.use_fw_tx_credits = true,
+		.delay_unmap_buffer = false,
 	},
 	{
 		.id = QCA6174_HW_2_1_VERSION,
@@ -252,6 +256,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.dynamic_sar_support = false,
 		.hw_restart_disconnect = false,
 		.use_fw_tx_credits = true,
+		.delay_unmap_buffer = false,
 	},
 	{
 		.id = QCA6174_HW_2_1_VERSION,
@@ -291,6 +296,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.dynamic_sar_support = false,
 		.hw_restart_disconnect = false,
 		.use_fw_tx_credits = true,
+		.delay_unmap_buffer = false,
 	},
 	{
 		.id = QCA6174_HW_3_0_VERSION,
@@ -330,6 +336,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.dynamic_sar_support = false,
 		.hw_restart_disconnect = false,
 		.use_fw_tx_credits = true,
+		.delay_unmap_buffer = false,
 	},
 	{
 		.id = QCA6174_HW_3_2_VERSION,
@@ -373,6 +380,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.dynamic_sar_support = true,
 		.hw_restart_disconnect = false,
 		.use_fw_tx_credits = true,
+		.delay_unmap_buffer = false,
 	},
 	{
 		.id = QCA99X0_HW_2_0_DEV_VERSION,
@@ -418,6 +426,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.dynamic_sar_support = false,
 		.hw_restart_disconnect = false,
 		.use_fw_tx_credits = true,
+		.delay_unmap_buffer = false,
 	},
 	{
 		.id = QCA9984_HW_1_0_DEV_VERSION,
@@ -470,6 +479,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.dynamic_sar_support = false,
 		.hw_restart_disconnect = false,
 		.use_fw_tx_credits = true,
+		.delay_unmap_buffer = false,
 	},
 	{
 		.id = QCA9888_HW_2_0_DEV_VERSION,
@@ -519,6 +529,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.dynamic_sar_support = false,
 		.hw_restart_disconnect = false,
 		.use_fw_tx_credits = true,
+		.delay_unmap_buffer = false,
 	},
 	{
 		.id = QCA9377_HW_1_0_DEV_VERSION,
@@ -558,6 +569,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.dynamic_sar_support = false,
 		.hw_restart_disconnect = false,
 		.use_fw_tx_credits = true,
+		.delay_unmap_buffer = false,
 	},
 	{
 		.id = QCA9377_HW_1_1_DEV_VERSION,
@@ -599,6 +611,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.dynamic_sar_support = false,
 		.hw_restart_disconnect = false,
 		.use_fw_tx_credits = true,
+		.delay_unmap_buffer = false,
 	},
 	{
 		.id = QCA9377_HW_1_1_DEV_VERSION,
@@ -631,6 +644,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.dynamic_sar_support = false,
 		.hw_restart_disconnect = false,
 		.use_fw_tx_credits = true,
+		.delay_unmap_buffer = false,
 	},
 	{
 		.id = QCA4019_HW_1_0_DEV_VERSION,
@@ -677,6 +691,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.dynamic_sar_support = false,
 		.hw_restart_disconnect = false,
 		.use_fw_tx_credits = true,
+		.delay_unmap_buffer = false,
 	},
 	{
 		.id = WCN3990_HW_1_0_DEV_VERSION,
@@ -709,6 +724,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.dynamic_sar_support = true,
 		.hw_restart_disconnect = true,
 		.use_fw_tx_credits = false,
+		.delay_unmap_buffer = true,
 	},
 };
 
diff --git a/drivers/net/wireless/ath/ath10k/htc.c b/drivers/net/wireless/ath/ath10k/htc.c
index 6d1784f74bea..5bfeecb95fca 100644
--- a/drivers/net/wireless/ath/ath10k/htc.c
+++ b/drivers/net/wireless/ath/ath10k/htc.c
@@ -56,6 +56,15 @@ void ath10k_htc_notify_tx_completion(struct ath10k_htc_ep *ep,
 	ath10k_dbg(ar, ATH10K_DBG_HTC, "%s: ep %d skb %pK\n", __func__,
 		   ep->eid, skb);
 
+	/* A corner case where the copy completion is reaching to host but still
+	 * copy engine is processing it due to which host unmaps corresponding
+	 * memory and causes SMMU fault, hence as workaround adding delay
+	 * the unmapping memory to avoid SMMU faults.
+	 */
+	if (ar->hw_params.delay_unmap_buffer &&
+	    ep->ul_pipe_id == 3)
+		mdelay(2);
+
 	hdr = (struct ath10k_htc_hdr *)skb->data;
 	ath10k_htc_restore_tx_skb(ep->htc, skb);
 
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 1b99f3a39a11..9643031a4427 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -637,6 +637,8 @@ struct ath10k_hw_params {
 	bool hw_restart_disconnect;
 
 	bool use_fw_tx_credits;
+
+	bool delay_unmap_buffer;
 };
 
 struct htt_resp;
-- 
2.35.1

[PATCH AUTOSEL 6.0 10/73] drm/amd/display: prevent memory leak

[Sasha Levin]

From: gehao <gehao@kylinos.cn>

[ Upstream commit d232afb1f3417ae8194ccf19ad3a8360e70e104e ]

In dce6(0,1,4)_create_resource_pool and dce80_create_resource_pool
the allocated memory should be released if construct pool fails.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: gehao <gehao@kylinos.cn>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dce60/dce60_resource.c | 3 +++
 drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c | 2 ++
 2 files changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dce60/dce60_resource.c b/drivers/gpu/drm/amd/display/dc/dce60/dce60_resource.c
index fc6aa098bda0..8db9f7514466 100644
--- a/drivers/gpu/drm/amd/display/dc/dce60/dce60_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dce60/dce60_resource.c
@@ -1128,6 +1128,7 @@ struct resource_pool *dce60_create_resource_pool(
 	if (dce60_construct(num_virtual_links, dc, pool))
 		return &pool->base;
 
+	kfree(pool);
 	BREAK_TO_DEBUGGER();
 	return NULL;
 }
@@ -1325,6 +1326,7 @@ struct resource_pool *dce61_create_resource_pool(
 	if (dce61_construct(num_virtual_links, dc, pool))
 		return &pool->base;
 
+	kfree(pool);
 	BREAK_TO_DEBUGGER();
 	return NULL;
 }
@@ -1518,6 +1520,7 @@ struct resource_pool *dce64_create_resource_pool(
 	if (dce64_construct(num_virtual_links, dc, pool))
 		return &pool->base;
 
+	kfree(pool);
 	BREAK_TO_DEBUGGER();
 	return NULL;
 }
diff --git a/drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c b/drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c
index b28025960050..5825e6f412bd 100644
--- a/drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c
@@ -1137,6 +1137,7 @@ struct resource_pool *dce80_create_resource_pool(
 	if (dce80_construct(num_virtual_links, dc, pool))
 		return &pool->base;
 
+	kfree(pool);
 	BREAK_TO_DEBUGGER();
 	return NULL;
 }
@@ -1336,6 +1337,7 @@ struct resource_pool *dce81_create_resource_pool(
 	if (dce81_construct(num_virtual_links, dc, pool))
 		return &pool->base;
 
+	kfree(pool);
 	BREAK_TO_DEBUGGER();
 	return NULL;
 }
-- 
2.35.1

[PATCH AUTOSEL 6.0 11/73] drm/edid: add a quirk for two LG monitors to get them to work on 10bpc

[Sasha Levin]

From: Hamza Mahfooz <hamza.mahfooz@amd.com>

[ Upstream commit aa193f7eff8ff753577351140b8af13b76cdc7c2 ]

The LG 27GP950 and LG 27GN950 have visible display corruption when
trying to use 10bpc modes. So, to fix this, cap their maximum DSC
target bitrate to 15bpp.

Suggested-by: Roman Li <roman.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/drm_edid.c  | 12 ++++++++++++
 include/drm/drm_connector.h |  6 ++++++
 2 files changed, 18 insertions(+)

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index eaa819381281..fefcfac999d9 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -87,6 +87,8 @@ static int oui(u8 first, u8 second, u8 third)
 #define EDID_QUIRK_FORCE_10BPC			(1 << 11)
 /* Non desktop display (i.e. HMD) */
 #define EDID_QUIRK_NON_DESKTOP			(1 << 12)
+/* Cap the DSC target bitrate to 15bpp */
+#define EDID_QUIRK_CAP_DSC_15BPP		(1 << 13)
 
 #define MICROSOFT_IEEE_OUI	0xca125c
 
@@ -147,6 +149,12 @@ static const struct edid_quirk {
 	EDID_QUIRK('F', 'C', 'M', 13600, EDID_QUIRK_PREFER_LARGE_75 |
 				       EDID_QUIRK_DETAILED_IN_CM),
 
+	/* LG 27GP950 */
+	EDID_QUIRK('G', 'S', 'M', 0x5bbf, EDID_QUIRK_CAP_DSC_15BPP),
+
+	/* LG 27GN950 */
+	EDID_QUIRK('G', 'S', 'M', 0x5b9a, EDID_QUIRK_CAP_DSC_15BPP),
+
 	/* LGD panel of HP zBook 17 G2, eDP 10 bpc, but reports unknown bpc */
 	EDID_QUIRK('L', 'G', 'D', 764, EDID_QUIRK_FORCE_10BPC),
 
@@ -6116,6 +6124,7 @@ static void drm_reset_display_info(struct drm_connector *connector)
 
 	info->mso_stream_count = 0;
 	info->mso_pixel_overlap = 0;
+	info->max_dsc_bpp = 0;
 }
 
 static u32 update_display_info(struct drm_connector *connector,
@@ -6202,6 +6211,9 @@ static u32 update_display_info(struct drm_connector *connector,
 		info->non_desktop = true;
 	}
 
+	if (quirks & EDID_QUIRK_CAP_DSC_15BPP)
+		info->max_dsc_bpp = 15;
+
 	return quirks;
 }
 
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 7df7876b2ad5..d9879fc9ceb1 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -635,6 +635,12 @@ struct drm_display_info {
 	 * @mso_pixel_overlap: eDP MSO segment pixel overlap, 0-8 pixels.
 	 */
 	u8 mso_pixel_overlap;
+
+	/**
+	 * @max_dsc_bpp: Maximum DSC target bitrate, if it is set to 0 the
+	 * monitor's default value is used instead.
+	 */
+	u32 max_dsc_bpp;
 };
 
 int drm_display_info_set_bus_formats(struct drm_display_info *info,
-- 
2.35.1

[PATCH AUTOSEL 6.0 12/73] Revert "drm/amd/display: Limit max DSC target bpp for specific monitors"

[Sasha Levin]

From: Hamza Mahfooz <hamza.mahfooz@amd.com>

[ Upstream commit 6803dfd3a69ccb318772463a86e40929fd4fbac7 ]

This reverts commit 55eea8ef98641f6e1e1c202bd3a49a57c1dd4059.

This quirk is now handled in the DRM core, so we can drop all of
the internal code that was added to handle it.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 35 -------------------
 1 file changed, 35 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
index a0154a5f7183..e2d3027c3993 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
@@ -41,39 +41,6 @@
 #include "dm_helpers.h"
 #include "ddc_service_types.h"
 
-struct monitor_patch_info {
-	unsigned int manufacturer_id;
-	unsigned int product_id;
-	void (*patch_func)(struct dc_edid_caps *edid_caps, unsigned int param);
-	unsigned int patch_param;
-};
-static void set_max_dsc_bpp_limit(struct dc_edid_caps *edid_caps, unsigned int param);
-
-static const struct monitor_patch_info monitor_patch_table[] = {
-{0x6D1E, 0x5BBF, set_max_dsc_bpp_limit, 15},
-{0x6D1E, 0x5B9A, set_max_dsc_bpp_limit, 15},
-};
-
-static void set_max_dsc_bpp_limit(struct dc_edid_caps *edid_caps, unsigned int param)
-{
-	if (edid_caps)
-		edid_caps->panel_patch.max_dsc_target_bpp_limit = param;
-}
-
-static int amdgpu_dm_patch_edid_caps(struct dc_edid_caps *edid_caps)
-{
-	int i, ret = 0;
-
-	for (i = 0; i < ARRAY_SIZE(monitor_patch_table); i++)
-		if ((edid_caps->manufacturer_id == monitor_patch_table[i].manufacturer_id)
-			&&  (edid_caps->product_id == monitor_patch_table[i].product_id)) {
-			monitor_patch_table[i].patch_func(edid_caps, monitor_patch_table[i].patch_param);
-			ret++;
-		}
-
-	return ret;
-}
-
 /* dm_helpers_parse_edid_caps
  *
  * Parse edid caps
@@ -148,8 +115,6 @@ enum dc_edid_status dm_helpers_parse_edid_caps(
 	kfree(sads);
 	kfree(sadb);
 
-	amdgpu_dm_patch_edid_caps(edid_caps);
-
 	return result;
 }
 
-- 
2.35.1

[PATCH AUTOSEL 6.0 13/73] drm/rockchip: use pm_runtime_resume_and_get() instead of pm_runtime_get_sync()

[Sasha Levin]

From: Yuan Can <yuancan@huawei.com>

[ Upstream commit e3558747ebe15306e6d0b75bd6d211436be4a7d5 ]

Replace pm_runtime_get_sync() with pm_runtime_resume_and_get() to avoid
device usage counter leak.

Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615062644.96837-1-yuancan@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 2 +-
 drivers/gpu/drm/rockchip/rockchip_drm_vop.c     | 4 ++--
 drivers/gpu/drm/rockchip/rockchip_drm_vop2.c    | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
index 1aa3700551f4..1e1a8bc6c856 100644
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
@@ -1201,7 +1201,7 @@ static int dw_mipi_dsi_dphy_power_on(struct phy *phy)
 		return i;
 	}
 
-	ret = pm_runtime_get_sync(dsi->dev);
+	ret = pm_runtime_resume_and_get(dsi->dev);
 	if (ret < 0) {
 		DRM_DEV_ERROR(dsi->dev, "failed to enable device: %d\n", ret);
 		return ret;
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
index ad3958b6f8bf..9a039a31fe48 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
@@ -605,7 +605,7 @@ static int vop_enable(struct drm_crtc *crtc, struct drm_crtc_state *old_state)
 	struct vop *vop = to_vop(crtc);
 	int ret, i;
 
-	ret = pm_runtime_get_sync(vop->dev);
+	ret = pm_runtime_resume_and_get(vop->dev);
 	if (ret < 0) {
 		DRM_DEV_ERROR(vop->dev, "failed to get pm runtime: %d\n", ret);
 		return ret;
@@ -1953,7 +1953,7 @@ static int vop_initial(struct vop *vop)
 		return PTR_ERR(vop->dclk);
 	}
 
-	ret = pm_runtime_get_sync(vop->dev);
+	ret = pm_runtime_resume_and_get(vop->dev);
 	if (ret < 0) {
 		DRM_DEV_ERROR(vop->dev, "failed to get pm runtime: %d\n", ret);
 		return ret;
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
index 1fc04019dfd8..6dc14ea7f6fc 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
@@ -823,7 +823,7 @@ static void vop2_enable(struct vop2 *vop2)
 {
 	int ret;
 
-	ret = pm_runtime_get_sync(vop2->dev);
+	ret = pm_runtime_resume_and_get(vop2->dev);
 	if (ret < 0) {
 		drm_err(vop2->drm, "failed to get pm runtime: %d\n", ret);
 		return;
-- 
2.35.1

[PATCH AUTOSEL 6.0 14/73] blk-mq: avoid double ->queue_rq() because of early timeout

[Sasha Levin]

From: David Jeffery <djeffery@redhat.com>

[ Upstream commit 82c229476b8f6afd7e09bc4dc77d89dc19ff7688 ]

David Jeffery found one double ->queue_rq() issue, so far it can
be triggered in VM use case because of long vmexit latency or preempt
latency of vCPU pthread or long page fault in vCPU pthread, then block
IO req could be timed out before queuing the request to hardware but after
calling blk_mq_start_request() during ->queue_rq(), then timeout handler
may handle it by requeue, then double ->queue_rq() is caused, and kernel
panic.

So far, it is driver's responsibility to cover the race between timeout
and completion, so it seems supposed to be solved in driver in theory,
given driver has enough knowledge.

But it is really one common problem, lots of driver could have similar
issue, and could be hard to fix all affected drivers, even it isn't easy
for driver to handle the race. So David suggests this patch by draining
in-progress ->queue_rq() for solving this issue.

Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: virtualization@lists.linux-foundation.org
Cc: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221026051957.358818-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-mq.c | 56 +++++++++++++++++++++++++++++++++++++++-----------
 1 file changed, 44 insertions(+), 12 deletions(-)

diff --git a/block/blk-mq.c b/block/blk-mq.c
index 3f1f5e3e0951..1a30f6580274 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -1442,7 +1442,13 @@ static void blk_mq_rq_timed_out(struct request *req)
 	blk_add_timer(req);
 }
 
-static bool blk_mq_req_expired(struct request *rq, unsigned long *next)
+struct blk_expired_data {
+	bool has_timedout_rq;
+	unsigned long next;
+	unsigned long timeout_start;
+};
+
+static bool blk_mq_req_expired(struct request *rq, struct blk_expired_data *expired)
 {
 	unsigned long deadline;
 
@@ -1452,13 +1458,13 @@ static bool blk_mq_req_expired(struct request *rq, unsigned long *next)
 		return false;
 
 	deadline = READ_ONCE(rq->deadline);
-	if (time_after_eq(jiffies, deadline))
+	if (time_after_eq(expired->timeout_start, deadline))
 		return true;
 
-	if (*next == 0)
-		*next = deadline;
-	else if (time_after(*next, deadline))
-		*next = deadline;
+	if (expired->next == 0)
+		expired->next = deadline;
+	else if (time_after(expired->next, deadline))
+		expired->next = deadline;
 	return false;
 }
 
@@ -1472,7 +1478,7 @@ void blk_mq_put_rq_ref(struct request *rq)
 
 static bool blk_mq_check_expired(struct request *rq, void *priv)
 {
-	unsigned long *next = priv;
+	struct blk_expired_data *expired = priv;
 
 	/*
 	 * blk_mq_queue_tag_busy_iter() has locked the request, so it cannot
@@ -1481,7 +1487,18 @@ static bool blk_mq_check_expired(struct request *rq, void *priv)
 	 * it was completed and reallocated as a new request after returning
 	 * from blk_mq_check_expired().
 	 */
-	if (blk_mq_req_expired(rq, next))
+	if (blk_mq_req_expired(rq, expired)) {
+		expired->has_timedout_rq = true;
+		return false;
+	}
+	return true;
+}
+
+static bool blk_mq_handle_expired(struct request *rq, void *priv)
+{
+	struct blk_expired_data *expired = priv;
+
+	if (blk_mq_req_expired(rq, expired))
 		blk_mq_rq_timed_out(rq);
 	return true;
 }
@@ -1490,7 +1507,9 @@ static void blk_mq_timeout_work(struct work_struct *work)
 {
 	struct request_queue *q =
 		container_of(work, struct request_queue, timeout_work);
-	unsigned long next = 0;
+	struct blk_expired_data expired = {
+		.timeout_start = jiffies,
+	};
 	struct blk_mq_hw_ctx *hctx;
 	unsigned long i;
 
@@ -1510,10 +1529,23 @@ static void blk_mq_timeout_work(struct work_struct *work)
 	if (!percpu_ref_tryget(&q->q_usage_counter))
 		return;
 
-	blk_mq_queue_tag_busy_iter(q, blk_mq_check_expired, &next);
+	/* check if there is any timed-out request */
+	blk_mq_queue_tag_busy_iter(q, blk_mq_check_expired, &expired);
+	if (expired.has_timedout_rq) {
+		/*
+		 * Before walking tags, we must ensure any submit started
+		 * before the current time has finished. Since the submit
+		 * uses srcu or rcu, wait for a synchronization point to
+		 * ensure all running submits have finished
+		 */
+		blk_mq_wait_quiesce_done(q);
+
+		expired.next = 0;
+		blk_mq_queue_tag_busy_iter(q, blk_mq_handle_expired, &expired);
+	}
 
-	if (next != 0) {
-		mod_timer(&q->timeout, next);
+	if (expired.next != 0) {
+		mod_timer(&q->timeout, expired.next);
 	} else {
 		/*
 		 * Request timeouts are handled as a forward rolling timer. If
-- 
2.35.1

[PATCH AUTOSEL 6.0 15/73] HID: apple: fix key translations where multiple quirks attempt to translate the same key

[Sasha Levin]

From: Kerem Karabay <kekrby@gmail.com>

[ Upstream commit 5476fcf7f7b901db1cea92acb1abdd12609e30e1 ]

The hid-apple driver does not support chaining translations or
dependencies on other translations. This creates two problems:

1 - In Non-English keyboards of Macs, KEY_102ND and KEY_GRAVE are
swapped and the APPLE_ISO_TILDE_QUIRK is used to work around this
problem. The quirk is not set for the Macs where these bugs happen yet
(see the 2nd patch for that), but this can be forced by setting the
iso_layout parameter. Unfortunately, this only partially works.
KEY_102ND gets translated to KEY_GRAVE, but KEY_GRAVE does not get
translated to KEY_102ND, so both of them end up functioning as
KEY_GRAVE. This is because the driver translates the keys as if Fn was
pressed and the original is sent if it is not pressed, without any
further translations happening on the key[#463]. KEY_GRAVE is present at
macbookpro_no_esc_fn_keys[#195], so this is what happens:

    - KEY_GRAVE -> KEY_ESC (as if Fn is pressed)
    - KEY_GRAVE is returned (Fn isn't pressed, so translation is discarded)
    - KEY_GRAVE -> KEY_102ND (this part is not reached!)
    ...

2 - In case the touchbar does not work, the driver supports sending
Escape when Fn+KEY_GRAVE is pressed. As mentioned previously, KEY_102ND
is actually KEY_GRAVE and needs to be translated before this happens.

Normally, these are the steps that should happen:

    - KEY_102ND -> KEY_GRAVE
    - KEY_GRAVE -> KEY_ESC (Fn is pressed)
    - KEY_ESC is returned

Though this is what happens instead, as dependencies on other
translations are not supported:

    - KEY_102ND -> KEY_ESC (Fn is pressed)
    - KEY_ESC is returned

This patch fixes both bugs by ordering the translations correctly and by
making the translations continue and not return immediately after
translating a key so that chained translations work and translations can
depend on other ones.

This patch also simplifies the implementation of the swap_fn_leftctrl
option a little bit, as it makes it simply use a normal translation
instead adding extra code to translate a key to KEY_FN[#381]. This change
wasn't put in another patch as the code that translates the Fn key needs
to be changed because of the changes in the patch, and those changes
would be discarded with the next patch anyway (the part that originally
translates KEY_FN to KEY_LEFTCTRL needs to be made an else-if branch of
the part that transltes KEY_LEFTCTRL to KEY_FN).

Note: Line numbers (#XYZ) are for drivers/hid/hid-apple.c at commit
20afcc462579 ("HID: apple: Add "GANSS" to the non-Apple list").

Note: These bugs are only present on Macs with a keyboard with no
dedicated escape key and a non-English layout.

Signed-off-by: Kerem Karabay <kekrby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-apple.c | 102 +++++++++++++++++-----------------------
 1 file changed, 44 insertions(+), 58 deletions(-)

diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index 6970797cdc56..e86bbf85b87e 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -314,6 +314,7 @@ static const struct apple_key_translation swapped_option_cmd_keys[] = {
 
 static const struct apple_key_translation swapped_fn_leftctrl_keys[] = {
 	{ KEY_FN, KEY_LEFTCTRL },
+	{ KEY_LEFTCTRL, KEY_FN },
 	{ }
 };
 
@@ -375,24 +376,40 @@ static int hidinput_apple_event(struct hid_device *hid, struct input_dev *input,
 	struct apple_sc *asc = hid_get_drvdata(hid);
 	const struct apple_key_translation *trans, *table;
 	bool do_translate;
-	u16 code = 0;
+	u16 code = usage->code;
 	unsigned int real_fnmode;
 
-	u16 fn_keycode = (swap_fn_leftctrl) ? (KEY_LEFTCTRL) : (KEY_FN);
-
-	if (usage->code == fn_keycode) {
-		asc->fn_on = !!value;
-		input_event_with_scancode(input, usage->type, KEY_FN,
-				usage->hid, value);
-		return 1;
-	}
-
 	if (fnmode == 3) {
 		real_fnmode = (asc->quirks & APPLE_IS_NON_APPLE) ? 2 : 1;
 	} else {
 		real_fnmode = fnmode;
 	}
 
+	if (swap_fn_leftctrl) {
+		trans = apple_find_translation(swapped_fn_leftctrl_keys, code);
+
+		if (trans)
+			code = trans->to;
+	}
+
+	if (iso_layout > 0 || (iso_layout < 0 && (asc->quirks & APPLE_ISO_TILDE_QUIRK) &&
+			hid->country == HID_COUNTRY_INTERNATIONAL_ISO)) {
+		trans = apple_find_translation(apple_iso_keyboard, code);
+
+		if (trans)
+			code = trans->to;
+	}
+
+	if (swap_opt_cmd) {
+		trans = apple_find_translation(swapped_option_cmd_keys, code);
+
+		if (trans)
+			code = trans->to;
+	}
+
+	if (code == KEY_FN)
+		asc->fn_on = !!value;
+
 	if (real_fnmode) {
 		if (hid->product == USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI ||
 		    hid->product == USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO ||
@@ -430,15 +447,18 @@ static int hidinput_apple_event(struct hid_device *hid, struct input_dev *input,
 		else
 			table = apple_fn_keys;
 
-		trans = apple_find_translation (table, usage->code);
+		trans = apple_find_translation(table, code);
 
 		if (trans) {
-			if (test_bit(trans->from, input->key))
+			bool from_is_set = test_bit(trans->from, input->key);
+			bool to_is_set = test_bit(trans->to, input->key);
+
+			if (from_is_set)
 				code = trans->from;
-			else if (test_bit(trans->to, input->key))
+			else if (to_is_set)
 				code = trans->to;
 
-			if (!code) {
+			if (!(from_is_set || to_is_set)) {
 				if (trans->flags & APPLE_FLAG_FKEY) {
 					switch (real_fnmode) {
 					case 1:
@@ -455,62 +475,31 @@ static int hidinput_apple_event(struct hid_device *hid, struct input_dev *input,
 					do_translate = asc->fn_on;
 				}
 
-				code = do_translate ? trans->to : trans->from;
+				if (do_translate)
+					code = trans->to;
 			}
-
-			input_event_with_scancode(input, usage->type, code,
-					usage->hid, value);
-			return 1;
 		}
 
 		if (asc->quirks & APPLE_NUMLOCK_EMULATION &&
-				(test_bit(usage->code, asc->pressed_numlock) ||
+				(test_bit(code, asc->pressed_numlock) ||
 				test_bit(LED_NUML, input->led))) {
-			trans = apple_find_translation(powerbook_numlock_keys,
-					usage->code);
+			trans = apple_find_translation(powerbook_numlock_keys, code);
 
 			if (trans) {
 				if (value)
-					set_bit(usage->code,
-							asc->pressed_numlock);
+					set_bit(code, asc->pressed_numlock);
 				else
-					clear_bit(usage->code,
-							asc->pressed_numlock);
+					clear_bit(code, asc->pressed_numlock);
 
-				input_event_with_scancode(input, usage->type,
-						trans->to, usage->hid, value);
+				code = trans->to;
 			}
-
-			return 1;
 		}
 	}
 
-	if (iso_layout > 0 || (iso_layout < 0 && (asc->quirks & APPLE_ISO_TILDE_QUIRK) &&
-			hid->country == HID_COUNTRY_INTERNATIONAL_ISO)) {
-		trans = apple_find_translation(apple_iso_keyboard, usage->code);
-		if (trans) {
-			input_event_with_scancode(input, usage->type,
-					trans->to, usage->hid, value);
-			return 1;
-		}
-	}
+	if (usage->code != code) {
+		input_event_with_scancode(input, usage->type, code, usage->hid, value);
 
-	if (swap_opt_cmd) {
-		trans = apple_find_translation(swapped_option_cmd_keys, usage->code);
-		if (trans) {
-			input_event_with_scancode(input, usage->type,
-					trans->to, usage->hid, value);
-			return 1;
-		}
-	}
-
-	if (swap_fn_leftctrl) {
-		trans = apple_find_translation(swapped_fn_leftctrl_keys, usage->code);
-		if (trans) {
-			input_event_with_scancode(input, usage->type,
-					trans->to, usage->hid, value);
-			return 1;
-		}
+		return 1;
 	}
 
 	return 0;
@@ -640,9 +629,6 @@ static void apple_setup_input(struct input_dev *input)
 	apple_setup_key_translation(input, apple2021_fn_keys);
 	apple_setup_key_translation(input, macbookpro_no_esc_fn_keys);
 	apple_setup_key_translation(input, macbookpro_dedicated_esc_fn_keys);
-
-	if (swap_fn_leftctrl)
-		apple_setup_key_translation(input, swapped_fn_leftctrl_keys);
 }
 
 static int apple_input_mapping(struct hid_device *hdev, struct hid_input *hi,
-- 
2.35.1

[PATCH AUTOSEL 6.0 16/73] HID: apple: enable APPLE_ISO_TILDE_QUIRK for the keyboards of Macs with the T2 chip

[Sasha Levin]

From: Kerem Karabay <kekrby@gmail.com>

[ Upstream commit 084bc074c231e716cbcb9e8f9db05b17fd3563cf ]

The iso_layout parameter must be manually set to get the driver to
swap KEY_102ND and KEY_GRAVE. This patch eliminates the need to do that.

This is safe to do, as Macs with keyboards that do not need the quirk
will keep working the same way as the value of hid->country will be
different than HID_COUNTRY_INTERNATIONAL_ISO. This was tested by one
person with a Mac with the WELLSPRINGT2_J152F keyboard with a layout
that does not require the quirk to be set.

Signed-off-by: Kerem Karabay <kekrby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-apple.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index e86bbf85b87e..c671ce94671c 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -997,21 +997,21 @@ static const struct hid_device_id apple_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING9_JIS),
 		.driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRINGT2_J140K),
-		.driver_data = APPLE_HAS_FN | APPLE_BACKLIGHT_CTL },
+		.driver_data = APPLE_HAS_FN | APPLE_BACKLIGHT_CTL | APPLE_ISO_TILDE_QUIRK },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRINGT2_J132),
-		.driver_data = APPLE_HAS_FN | APPLE_BACKLIGHT_CTL },
+		.driver_data = APPLE_HAS_FN | APPLE_BACKLIGHT_CTL | APPLE_ISO_TILDE_QUIRK },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRINGT2_J680),
-		.driver_data = APPLE_HAS_FN | APPLE_BACKLIGHT_CTL },
+		.driver_data = APPLE_HAS_FN | APPLE_BACKLIGHT_CTL | APPLE_ISO_TILDE_QUIRK },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRINGT2_J213),
-		.driver_data = APPLE_HAS_FN | APPLE_BACKLIGHT_CTL },
+		.driver_data = APPLE_HAS_FN | APPLE_BACKLIGHT_CTL | APPLE_ISO_TILDE_QUIRK },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRINGT2_J214K),
-		.driver_data = APPLE_HAS_FN },
+		.driver_data = APPLE_HAS_FN | APPLE_ISO_TILDE_QUIRK },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRINGT2_J223),
-		.driver_data = APPLE_HAS_FN },
+		.driver_data = APPLE_HAS_FN | APPLE_ISO_TILDE_QUIRK },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRINGT2_J230K),
-		.driver_data = APPLE_HAS_FN },
+		.driver_data = APPLE_HAS_FN | APPLE_ISO_TILDE_QUIRK },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRINGT2_J152F),
-		.driver_data = APPLE_HAS_FN },
+		.driver_data = APPLE_HAS_FN | APPLE_ISO_TILDE_QUIRK },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI),
 		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO),
-- 
2.35.1

[PATCH AUTOSEL 6.0 17/73] wifi: ath11k: Fix qmi_msg_handler data structure initialization

[Sasha Levin]

From: Rahul Bhattacharjee <quic_rbhattac@quicinc.com>

[ Upstream commit ed3725e15a154ebebf44e0c34806c57525483f92 ]

qmi_msg_handler is required to be null terminated by QMI module.
There might be a case where a handler for a msg id is not present in the
handlers array which can lead to infinite loop while searching the handler
and therefore out of bound access in qmi_invoke_handler().
Hence update the initialization in qmi_msg_handler data structure.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1

Signed-off-by: Rahul Bhattacharjee <quic_rbhattac@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221021090126.28626-1-quic_rbhattac@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath11k/qmi.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/ath/ath11k/qmi.c b/drivers/net/wireless/ath/ath11k/qmi.c
index e6ced8597e1d..539134a6e9d9 100644
--- a/drivers/net/wireless/ath/ath11k/qmi.c
+++ b/drivers/net/wireless/ath/ath11k/qmi.c
@@ -3083,6 +3083,9 @@ static const struct qmi_msg_handler ath11k_qmi_msg_handlers[] = {
 			sizeof(struct qmi_wlfw_fw_init_done_ind_msg_v01),
 		.fn = ath11k_qmi_msg_fw_init_done_cb,
 	},
+
+	/* end of list */
+	{},
 };
 
 static int ath11k_qmi_ops_new_server(struct qmi_handle *qmi_hdl,
-- 
2.35.1

[PATCH AUTOSEL 6.0 18/73] qed (gcc13): use u16 for fid to be big enough

[Sasha Levin]

From: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>

[ Upstream commit 7d84118229bf7f7290438c85caa8e49de52d50c1 ]

gcc 13 correctly reports overflow in qed_grc_dump_addr_range():
In file included from drivers/net/ethernet/qlogic/qed/qed.h:23,
                 from drivers/net/ethernet/qlogic/qed/qed_debug.c:10:
drivers/net/ethernet/qlogic/qed/qed_debug.c: In function 'qed_grc_dump_addr_range':
include/linux/qed/qed_if.h:1217:9: error: overflow in conversion from 'int' to 'u8' {aka 'unsigned char'} changes value from '(int)vf_id << 8 | 128' to '128' [-Werror=overflow]

We do:
  u8 fid;
  ...
  fid = vf_id << 8 | 128;

Since fid is 16bit (and the stored value above too), fid should be u16,
not u8. Fix that.

Cc: Martin Liska <mliska@suse.cz>
Cc: Ariel Elior <aelior@marvell.com>
Cc: Manish Chopra <manishc@marvell.com>
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20221031114354.10398-1-jirislaby@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_debug.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_debug.c b/drivers/net/ethernet/qlogic/qed/qed_debug.c
index 5250d1d1e49c..86ecb080b153 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_debug.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_debug.c
@@ -1972,9 +1972,10 @@ static u32 qed_grc_dump_addr_range(struct qed_hwfn *p_hwfn,
 				   u8 split_id)
 {
 	struct dbg_tools_data *dev_data = &p_hwfn->dbg_info;
-	u8 port_id = 0, pf_id = 0, vf_id = 0, fid = 0;
+	u8 port_id = 0, pf_id = 0, vf_id = 0;
 	bool read_using_dmae = false;
 	u32 thresh;
+	u16 fid;
 
 	if (!dump)
 		return len;
-- 
2.35.1

[PATCH AUTOSEL 6.0 19/73] drm/meson: Fix return type of meson_encoder_cvbs_mode_valid()

[Sasha Levin]

From: Nathan Chancellor <nathan@kernel.org>

[ Upstream commit 6c4e4d35203301906afb53c6d1e1302d4c793c05 ]

With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:

  drivers/gpu/drm/meson/meson_encoder_cvbs.c:211:16: error: incompatible function pointer types initializing 'enum drm_mode_status (*)(struct drm_bridge *, const struct drm_display_info *, const struct drm_display_mode *)' with an expression of type 'int (struct drm_bridge *, const struct drm_display_info *, const struct drm_display_mode *)' [-Werror,-Wincompatible-function-pointer-types-strict]
          .mode_valid = meson_encoder_cvbs_mode_valid,
                        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  1 error generated.

->mode_valid() in 'struct drm_bridge_funcs' expects a return type of
'enum drm_mode_status', not 'int'. Adjust the return type of
meson_encoder_cvbs_mode_valid() to match the prototype's to resolve the
warning and CFI failure.

Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221102155242.1927166-1-nathan@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/meson/meson_encoder_cvbs.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/meson/meson_encoder_cvbs.c b/drivers/gpu/drm/meson/meson_encoder_cvbs.c
index 5675bc2a92cf..3f73b211fa8e 100644
--- a/drivers/gpu/drm/meson/meson_encoder_cvbs.c
+++ b/drivers/gpu/drm/meson/meson_encoder_cvbs.c
@@ -116,9 +116,10 @@ static int meson_encoder_cvbs_get_modes(struct drm_bridge *bridge,
 	return i;
 }
 
-static int meson_encoder_cvbs_mode_valid(struct drm_bridge *bridge,
-					const struct drm_display_info *display_info,
-					const struct drm_display_mode *mode)
+static enum drm_mode_status
+meson_encoder_cvbs_mode_valid(struct drm_bridge *bridge,
+			      const struct drm_display_info *display_info,
+			      const struct drm_display_mode *mode)
 {
 	if (meson_cvbs_get_mode(mode))
 		return MODE_OK;
-- 
2.35.1

[PATCH AUTOSEL 6.0 20/73] bpf: make sure skb->len != 0 when redirecting to a tunneling device

[Sasha Levin]

From: Stanislav Fomichev <sdf@google.com>

[ Upstream commit 07ec7b502800ba9f7b8b15cb01dd6556bb41aaca ]

syzkaller managed to trigger another case where skb->len == 0
when we enter __dev_queue_xmit:

WARNING: CPU: 0 PID: 2470 at include/linux/skbuff.h:2576 skb_assert_len include/linux/skbuff.h:2576 [inline]
WARNING: CPU: 0 PID: 2470 at include/linux/skbuff.h:2576 __dev_queue_xmit+0x2069/0x35e0 net/core/dev.c:4295

Call Trace:
 dev_queue_xmit+0x17/0x20 net/core/dev.c:4406
 __bpf_tx_skb net/core/filter.c:2115 [inline]
 __bpf_redirect_no_mac net/core/filter.c:2140 [inline]
 __bpf_redirect+0x5fb/0xda0 net/core/filter.c:2163
 ____bpf_clone_redirect net/core/filter.c:2447 [inline]
 bpf_clone_redirect+0x247/0x390 net/core/filter.c:2419
 bpf_prog_48159a89cb4a9a16+0x59/0x5e
 bpf_dispatcher_nop_func include/linux/bpf.h:897 [inline]
 __bpf_prog_run include/linux/filter.h:596 [inline]
 bpf_prog_run include/linux/filter.h:603 [inline]
 bpf_test_run+0x46c/0x890 net/bpf/test_run.c:402
 bpf_prog_test_run_skb+0xbdc/0x14c0 net/bpf/test_run.c:1170
 bpf_prog_test_run+0x345/0x3c0 kernel/bpf/syscall.c:3648
 __sys_bpf+0x43a/0x6c0 kernel/bpf/syscall.c:5005
 __do_sys_bpf kernel/bpf/syscall.c:5091 [inline]
 __se_sys_bpf kernel/bpf/syscall.c:5089 [inline]
 __x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5089
 do_syscall_64+0x54/0x70 arch/x86/entry/common.c:48
 entry_SYSCALL_64_after_hwframe+0x61/0xc6

The reproducer doesn't really reproduce outside of syzkaller
environment, so I'm taking a guess here. It looks like we
do generate correct ETH_HLEN-sized packet, but we redirect
the packet to the tunneling device. Before we do so, we
__skb_pull l2 header and arrive again at skb->len == 0.
Doesn't seem like we can do anything better than having
an explicit check after __skb_pull?

Cc: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+f635e86ec3fa0a37e019@syzkaller.appspotmail.com
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20221027225537.353077-1-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/filter.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/core/filter.c b/net/core/filter.c
index c191db80ce93..e7c8d76c22db 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -2125,6 +2125,10 @@ static int __bpf_redirect_no_mac(struct sk_buff *skb, struct net_device *dev,
 
 	if (mlen) {
 		__skb_pull(skb, mlen);
+		if (unlikely(!skb->len)) {
+			kfree_skb(skb);
+			return -ERANGE;
+		}
 
 		/* At ingress, the mac header has already been pulled once.
 		 * At egress, skb_pospull_rcsum has to be done in case that
-- 
2.35.1

[PATCH AUTOSEL 6.0 21/73] net: ethernet: ti: Fix return type of netcp_ndo_start_xmit()

[Sasha Levin]

From: Nathan Chancellor <nathan@kernel.org>

[ Upstream commit 63fe6ff674a96cfcfc0fa8df1051a27aa31c70b4 ]

With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:

  drivers/net/ethernet/ti/netcp_core.c:1944:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
          .ndo_start_xmit         = netcp_ndo_start_xmit,
                                    ^~~~~~~~~~~~~~~~~~~~
  1 error generated.

->ndo_start_xmit() in 'struct net_device_ops' expects a return type of
'netdev_tx_t', not 'int'. Adjust the return type of
netcp_ndo_start_xmit() to match the prototype's to resolve the warning
and CFI failure.

Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221102160933.1601260-1-nathan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/ti/netcp_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/ti/netcp_core.c b/drivers/net/ethernet/ti/netcp_core.c
index b15d44261e76..267252560942 100644
--- a/drivers/net/ethernet/ti/netcp_core.c
+++ b/drivers/net/ethernet/ti/netcp_core.c
@@ -1261,7 +1261,7 @@ static int netcp_tx_submit_skb(struct netcp_intf *netcp,
 }
 
 /* Submit the packet */
-static int netcp_ndo_start_xmit(struct sk_buff *skb, struct net_device *ndev)
+static netdev_tx_t netcp_ndo_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 {
 	struct netcp_intf *netcp = netdev_priv(ndev);
 	struct netcp_stats *tx_stats = &netcp->stats;
-- 
2.35.1

[PATCH AUTOSEL 6.0 22/73] hamradio: baycom_epp: Fix return type of baycom_send_packet()

[Sasha Levin]

From: Nathan Chancellor <nathan@kernel.org>

[ Upstream commit c5733e5b15d91ab679646ec3149e192996a27d5d ]

With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:

  drivers/net/hamradio/baycom_epp.c:1119:25: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
          .ndo_start_xmit      = baycom_send_packet,
                                ^~~~~~~~~~~~~~~~~~
  1 error generated.

->ndo_start_xmit() in 'struct net_device_ops' expects a return type of
'netdev_tx_t', not 'int'. Adjust the return type of baycom_send_packet()
to match the prototype's to resolve the warning and CFI failure.

Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221102160610.1186145-1-nathan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/hamradio/baycom_epp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c
index 3e69079ed694..94720f8a8ba5 100644
--- a/drivers/net/hamradio/baycom_epp.c
+++ b/drivers/net/hamradio/baycom_epp.c
@@ -758,7 +758,7 @@ static void epp_bh(struct work_struct *work)
  * ===================== network driver interface =========================
  */
 
-static int baycom_send_packet(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t baycom_send_packet(struct sk_buff *skb, struct net_device *dev)
 {
 	struct baycom_state *bc = netdev_priv(dev);
 
-- 
2.35.1

[PATCH AUTOSEL 6.0 23/73] wifi: brcmfmac: Fix potential shift-out-of-bounds in brcmf_fw_alloc_request()

[Sasha Levin]

From: Minsuk Kang <linuxlovemin@yonsei.ac.kr>

[ Upstream commit 81d17f6f3331f03c8eafdacea68ab773426c1e3c ]

This patch fixes a shift-out-of-bounds in brcmfmac that occurs in
BIT(chiprev) when a 'chiprev' provided by the device is too large.
It should also not be equal to or greater than BITS_PER_TYPE(u32)
as we do bitwise AND with a u32 variable and BIT(chiprev). The patch
adds a check that makes the function return NULL if that is the case.
Note that the NULL case is later handled by the bus-specific caller,
brcmf_usb_probe_cb() or brcmf_usb_reset_resume(), for example.

Found by a modified version of syzkaller.

UBSAN: shift-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
shift exponent 151055786 is too large for 64-bit type 'long unsigned int'
CPU: 0 PID: 1885 Comm: kworker/0:2 Tainted: G           O      5.14.0+ #132
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: usb_hub_wq hub_event
Call Trace:
 dump_stack_lvl+0x57/0x7d
 ubsan_epilogue+0x5/0x40
 __ubsan_handle_shift_out_of_bounds.cold+0x53/0xdb
 ? lock_chain_count+0x20/0x20
 brcmf_fw_alloc_request.cold+0x19/0x3ea
 ? brcmf_fw_get_firmwares+0x250/0x250
 ? brcmf_usb_ioctl_resp_wait+0x1a7/0x1f0
 brcmf_usb_get_fwname+0x114/0x1a0
 ? brcmf_usb_reset_resume+0x120/0x120
 ? number+0x6c4/0x9a0
 brcmf_c_process_clm_blob+0x168/0x590
 ? put_dec+0x90/0x90
 ? enable_ptr_key_workfn+0x20/0x20
 ? brcmf_common_pd_remove+0x50/0x50
 ? rcu_read_lock_sched_held+0xa1/0xd0
 brcmf_c_preinit_dcmds+0x673/0xc40
 ? brcmf_c_set_joinpref_default+0x100/0x100
 ? rcu_read_lock_sched_held+0xa1/0xd0
 ? rcu_read_lock_bh_held+0xb0/0xb0
 ? lock_acquire+0x19d/0x4e0
 ? find_held_lock+0x2d/0x110
 ? brcmf_usb_deq+0x1cc/0x260
 ? mark_held_locks+0x9f/0xe0
 ? lockdep_hardirqs_on_prepare+0x273/0x3e0
 ? _raw_spin_unlock_irqrestore+0x47/0x50
 ? trace_hardirqs_on+0x1c/0x120
 ? brcmf_usb_deq+0x1a7/0x260
 ? brcmf_usb_rx_fill_all+0x5a/0xf0
 brcmf_attach+0x246/0xd40
 ? wiphy_new_nm+0x1476/0x1d50
 ? kmemdup+0x30/0x40
 brcmf_usb_probe+0x12de/0x1690
 ? brcmf_usbdev_qinit.constprop.0+0x470/0x470
 usb_probe_interface+0x25f/0x710
 really_probe+0x1be/0xa90
 __driver_probe_device+0x2ab/0x460
 ? usb_match_id.part.0+0x88/0xc0
 driver_probe_device+0x49/0x120
 __device_attach_driver+0x18a/0x250
 ? driver_allows_async_probing+0x120/0x120
 bus_for_each_drv+0x123/0x1a0
 ? bus_rescan_devices+0x20/0x20
 ? lockdep_hardirqs_on_prepare+0x273/0x3e0
 ? trace_hardirqs_on+0x1c/0x120
 __device_attach+0x207/0x330
 ? device_bind_driver+0xb0/0xb0
 ? kobject_uevent_env+0x230/0x12c0
 bus_probe_device+0x1a2/0x260
 device_add+0xa61/0x1ce0
 ? __mutex_unlock_slowpath+0xe7/0x660
 ? __fw_devlink_link_to_suppliers+0x550/0x550
 usb_set_configuration+0x984/0x1770
 ? kernfs_create_link+0x175/0x230
 usb_generic_driver_probe+0x69/0x90
 usb_probe_device+0x9c/0x220
 really_probe+0x1be/0xa90
 __driver_probe_device+0x2ab/0x460
 driver_probe_device+0x49/0x120
 __device_attach_driver+0x18a/0x250
 ? driver_allows_async_probing+0x120/0x120
 bus_for_each_drv+0x123/0x1a0
 ? bus_rescan_devices+0x20/0x20
 ? lockdep_hardirqs_on_prepare+0x273/0x3e0
 ? trace_hardirqs_on+0x1c/0x120
 __device_attach+0x207/0x330
 ? device_bind_driver+0xb0/0xb0
 ? kobject_uevent_env+0x230/0x12c0
 bus_probe_device+0x1a2/0x260
 device_add+0xa61/0x1ce0
 ? __fw_devlink_link_to_suppliers+0x550/0x550
 usb_new_device.cold+0x463/0xf66
 ? hub_disconnect+0x400/0x400
 ? _raw_spin_unlock_irq+0x24/0x30
 hub_event+0x10d5/0x3330
 ? hub_port_debounce+0x280/0x280
 ? __lock_acquire+0x1671/0x5790
 ? wq_calc_node_cpumask+0x170/0x2a0
 ? lock_release+0x640/0x640
 ? rcu_read_lock_sched_held+0xa1/0xd0
 ? rcu_read_lock_bh_held+0xb0/0xb0
 ? lockdep_hardirqs_on_prepare+0x273/0x3e0
 process_one_work+0x873/0x13e0
 ? lock_release+0x640/0x640
 ? pwq_dec_nr_in_flight+0x320/0x320
 ? rwlock_bug.part.0+0x90/0x90
 worker_thread+0x8b/0xd10
 ? __kthread_parkme+0xd9/0x1d0
 ? process_one_work+0x13e0/0x13e0
 kthread+0x379/0x450
 ? _raw_spin_unlock_irq+0x24/0x30
 ? set_kthread_struct+0x100/0x100
 ret_from_fork+0x1f/0x30

Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr>
Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221024071329.504277-1-linuxlovemin@yonsei.ac.kr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
index b8379e4034a4..55d538978e9c 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
@@ -737,6 +737,11 @@ brcmf_fw_alloc_request(u32 chip, u32 chiprev,
 	u32 i, j;
 	char end = '\0';
 
+	if (chiprev >= BITS_PER_TYPE(u32)) {
+		brcmf_err("Invalid chip revision %u\n", chiprev);
+		return NULL;
+	}
+
 	for (i = 0; i < table_size; i++) {
 		if (mapping_table[i].chipid == chip &&
 		    mapping_table[i].revmask & BIT(chiprev))
-- 
2.35.1

[PATCH AUTOSEL 6.0 24/73] HID: input: do not query XP-PEN Deco LW battery

[Sasha Levin]

From: José Expósito <jose.exposito89@gmail.com>

[ Upstream commit 037c1aaeb96fe5f778026f4c1ef28b26cf600bfa ]

The XP-PEN Deco LW drawing tablet can be connected by USB cable or using
a USB Bluetooth dongle. When it is connected using the dongle, there
might be a small delay until the tablet is paired with the dongle.

Fetching the device battery during this delay results in random battery
percentage values.

Add a quirk to avoid actively querying the battery percentage and wait
for the device to report it on its own.

Reported-by: Mia Kanashi <chad@redpilled.dev>
Tested-by: Mia Kanashi <chad@redpilled.dev>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-input.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 859aeb07542e..d728a94c642e 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -340,6 +340,7 @@ static enum power_supply_property hidinput_battery_props[] = {
 #define HID_BATTERY_QUIRK_PERCENT	(1 << 0) /* always reports percent */
 #define HID_BATTERY_QUIRK_FEATURE	(1 << 1) /* ask for feature report */
 #define HID_BATTERY_QUIRK_IGNORE	(1 << 2) /* completely ignore the battery */
+#define HID_BATTERY_QUIRK_AVOID_QUERY	(1 << 3) /* do not query the battery */
 
 static const struct hid_device_id hid_battery_quirks[] = {
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE,
@@ -373,6 +374,8 @@ static const struct hid_device_id hid_battery_quirks[] = {
 	  HID_BATTERY_QUIRK_IGNORE },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ELAN, USB_DEVICE_ID_ASUS_UX550VE_TOUCHSCREEN),
 	  HID_BATTERY_QUIRK_IGNORE },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE, USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_L),
+	  HID_BATTERY_QUIRK_AVOID_QUERY },
 	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_HP_ENVY_X360_15),
 	  HID_BATTERY_QUIRK_IGNORE },
 	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_HP_ENVY_X360_15T_DR100),
@@ -554,6 +557,9 @@ static int hidinput_setup_battery(struct hid_device *dev, unsigned report_type,
 	dev->battery_avoid_query = report_type == HID_INPUT_REPORT &&
 				   field->physical == HID_DG_STYLUS;
 
+	if (quirks & HID_BATTERY_QUIRK_AVOID_QUERY)
+		dev->battery_avoid_query = true;
+
 	dev->battery = power_supply_register(&dev->dev, psy_desc, &psy_cfg);
 	if (IS_ERR(dev->battery)) {
 		error = PTR_ERR(dev->battery);
-- 
2.35.1

[PATCH AUTOSEL 6.0 25/73] igb: Do not free q_vector unless new one was allocated

[Sasha Levin]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit 0668716506ca66f90d395f36ccdaebc3e0e84801 ]

Avoid potential use-after-free condition under memory pressure. If the
kzalloc() fails, q_vector will be freed but left in the original
adapter->q_vector[v_idx] array position.

Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 2796e81d2726..5f3a35b217b7 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -1202,8 +1202,12 @@ static int igb_alloc_q_vector(struct igb_adapter *adapter,
 	if (!q_vector) {
 		q_vector = kzalloc(size, GFP_KERNEL);
 	} else if (size > ksize(q_vector)) {
-		kfree_rcu(q_vector, rcu);
-		q_vector = kzalloc(size, GFP_KERNEL);
+		struct igb_q_vector *new_q_vector;
+
+		new_q_vector = kzalloc(size, GFP_KERNEL);
+		if (new_q_vector)
+			kfree_rcu(q_vector, rcu);
+		q_vector = new_q_vector;
 	} else {
 		memset(q_vector, 0, size);
 	}
-- 
2.35.1

[PATCH AUTOSEL 6.0 26/73] drm/amdgpu: Fix type of second parameter in trans_msg() callback

[Sasha Levin]

From: Nathan Chancellor <nathan@kernel.org>

[ Upstream commit f0d0f1087333714ee683cc134a95afe331d7ddd9 ]

With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:

  drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c:412:15: error: incompatible function pointer types initializing 'void (*)(struct amdgpu_device *, u32, u32, u32, u32)' (aka 'void (*)(struct amdgpu_device *, unsigned int, unsigned int, unsigned int, unsigned int)') with an expression of type 'void (struct amdgpu_device *, enum idh_request, u32, u32, u32)' (aka 'void (struct amdgpu_device *, enum idh_request, unsigned int, unsigned int, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict]
          .trans_msg = xgpu_ai_mailbox_trans_msg,
                      ^~~~~~~~~~~~~~~~~~~~~~~~~
  1 error generated.

  drivers/gpu/drm/amd/amdgpu/mxgpu_nv.c:435:15: error: incompatible function pointer types initializing 'void (*)(struct amdgpu_device *, u32, u32, u32, u32)' (aka 'void (*)(struct amdgpu_device *, unsigned int, unsigned int, unsigned int, unsigned int)') with an expression of type 'void (struct amdgpu_device *, enum idh_request, u32, u32, u32)' (aka 'void (struct amdgpu_device *, enum idh_request, unsigned int, unsigned int, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict]
          .trans_msg = xgpu_nv_mailbox_trans_msg,
                      ^~~~~~~~~~~~~~~~~~~~~~~~~
  1 error generated.

The type of the second parameter in the prototype should be 'enum
idh_request' instead of 'u32'. Update it to clear up the warnings.

Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h
index 617d072275eb..77210fd64a2b 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h
@@ -75,6 +75,8 @@ struct amdgpu_vf_error_buffer {
 	uint64_t data[AMDGPU_VF_ERROR_ENTRY_SIZE];
 };
 
+enum idh_request;
+
 /**
  * struct amdgpu_virt_ops - amdgpu device virt operations
  */
@@ -84,7 +86,8 @@ struct amdgpu_virt_ops {
 	int (*req_init_data)(struct amdgpu_device *adev);
 	int (*reset_gpu)(struct amdgpu_device *adev);
 	int (*wait_reset)(struct amdgpu_device *adev);
-	void (*trans_msg)(struct amdgpu_device *adev, u32 req, u32 data1, u32 data2, u32 data3);
+	void (*trans_msg)(struct amdgpu_device *adev, enum idh_request req,
+			  u32 data1, u32 data2, u32 data3);
 };
 
 /*
-- 
2.35.1

[PATCH AUTOSEL 6.0 27/73] drm/amdgpu: Fix type of second parameter in odn_edit_dpm_table() callback

[Sasha Levin]

From: Nathan Chancellor <nathan@kernel.org>

[ Upstream commit e4d0ef752081e7aa6ffb7ccac11c499c732a2e05 ]

With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:

  drivers/gpu/drm/amd/amdgpu/../pm/swsmu/amdgpu_smu.c:3008:29: error: incompatible function pointer types initializing 'int (*)(void *, uint32_t, long *, uint32_t)' (aka 'int (*)(void *, unsigned int, long *, unsigned int)') with an expression of type 'int (void *, enum PP_OD_DPM_TABLE_COMMAND, long *, uint32_t)' (aka 'int (void *, enum PP_OD_DPM_TABLE_COMMAND, long *, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict]
          .odn_edit_dpm_table      = smu_od_edit_dpm_table,
                                     ^~~~~~~~~~~~~~~~~~~~~
  1 error generated.

There are only two implementations of ->odn_edit_dpm_table() in 'struct
amd_pm_funcs': smu_od_edit_dpm_table() and pp_odn_edit_dpm_table(). One
has a second parameter type of 'enum PP_OD_DPM_TABLE_COMMAND' and the
other uses 'u32'. Ultimately, smu_od_edit_dpm_table() calls
->od_edit_dpm_table() from 'struct pptable_funcs' and
pp_odn_edit_dpm_table() calls ->odn_edit_dpm_table() from 'struct
pp_hwmgr_func', which both have a second parameter type of 'enum
PP_OD_DPM_TABLE_COMMAND'.

Update the type parameter in both the prototype in 'struct amd_pm_funcs'
and pp_odn_edit_dpm_table() to 'enum PP_OD_DPM_TABLE_COMMAND', which
cleans up the warning.

Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/include/kgd_pp_interface.h   | 3 ++-
 drivers/gpu/drm/amd/pm/powerplay/amd_powerplay.c | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/include/kgd_pp_interface.h b/drivers/gpu/drm/amd/include/kgd_pp_interface.h
index 7e3231c2191c..ffe19883b2ee 100644
--- a/drivers/gpu/drm/amd/include/kgd_pp_interface.h
+++ b/drivers/gpu/drm/amd/include/kgd_pp_interface.h
@@ -354,7 +354,8 @@ struct amd_pm_funcs {
 	int (*get_power_profile_mode)(void *handle, char *buf);
 	int (*set_power_profile_mode)(void *handle, long *input, uint32_t size);
 	int (*set_fine_grain_clk_vol)(void *handle, uint32_t type, long *input, uint32_t size);
-	int (*odn_edit_dpm_table)(void *handle, uint32_t type, long *input, uint32_t size);
+	int (*odn_edit_dpm_table)(void *handle, enum PP_OD_DPM_TABLE_COMMAND type,
+				  long *input, uint32_t size);
 	int (*set_mp1_state)(void *handle, enum pp_mp1_state mp1_state);
 	int (*smu_i2c_bus_access)(void *handle, bool acquire);
 	int (*gfx_state_change_set)(void *handle, uint32_t state);
diff --git a/drivers/gpu/drm/amd/pm/powerplay/amd_powerplay.c b/drivers/gpu/drm/amd/pm/powerplay/amd_powerplay.c
index 1eb4e613b27a..6562978de84a 100644
--- a/drivers/gpu/drm/amd/pm/powerplay/amd_powerplay.c
+++ b/drivers/gpu/drm/amd/pm/powerplay/amd_powerplay.c
@@ -838,7 +838,8 @@ static int pp_set_fine_grain_clk_vol(void *handle, uint32_t type, long *input, u
 	return hwmgr->hwmgr_func->set_fine_grain_clk_vol(hwmgr, type, input, size);
 }
 
-static int pp_odn_edit_dpm_table(void *handle, uint32_t type, long *input, uint32_t size)
+static int pp_odn_edit_dpm_table(void *handle, enum PP_OD_DPM_TABLE_COMMAND type,
+				 long *input, uint32_t size)
 {
 	struct pp_hwmgr *hwmgr = handle;
 
-- 
2.35.1

[PATCH AUTOSEL 6.0 28/73] s390/ctcm: Fix return type of ctc{mp,}m_tx()

[Sasha Levin]

From: Nathan Chancellor <nathan@kernel.org>

[ Upstream commit aa5bf80c3c067b82b4362cd6e8e2194623bcaca6 ]

With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:

  drivers/s390/net/ctcm_main.c:1064:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
          .ndo_start_xmit         = ctcm_tx,
                                    ^~~~~~~
  drivers/s390/net/ctcm_main.c:1072:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
          .ndo_start_xmit         = ctcmpc_tx,
                                    ^~~~~~~~~

->ndo_start_xmit() in 'struct net_device_ops' expects a return type of
'netdev_tx_t', not 'int'. Adjust the return type of ctc{mp,}m_tx() to
match the prototype's to resolve the warning and potential CFI failure,
should s390 select ARCH_SUPPORTS_CFI_CLANG in the future.

Additionally, while in the area, remove a comment block that is no
longer relevant.

Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/net/ctcm_main.c | 11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)

diff --git a/drivers/s390/net/ctcm_main.c b/drivers/s390/net/ctcm_main.c
index e0fdd54bfeb7..f672c610cb24 100644
--- a/drivers/s390/net/ctcm_main.c
+++ b/drivers/s390/net/ctcm_main.c
@@ -825,16 +825,9 @@ static int ctcmpc_transmit_skb(struct channel *ch, struct sk_buff *skb)
 /*
  * Start transmission of a packet.
  * Called from generic network device layer.
- *
- *  skb		Pointer to buffer containing the packet.
- *  dev		Pointer to interface struct.
- *
- * returns 0 if packet consumed, !0 if packet rejected.
- *         Note: If we return !0, then the packet is free'd by
- *               the generic network layer.
  */
 /* first merge version - leaving both functions separated */
-static int ctcm_tx(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t ctcm_tx(struct sk_buff *skb, struct net_device *dev)
 {
 	struct ctcm_priv *priv = dev->ml_priv;
 
@@ -877,7 +870,7 @@ static int ctcm_tx(struct sk_buff *skb, struct net_device *dev)
 }
 
 /* unmerged MPC variant of ctcm_tx */
-static int ctcmpc_tx(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t ctcmpc_tx(struct sk_buff *skb, struct net_device *dev)
 {
 	int len = 0;
 	struct ctcm_priv *priv = dev->ml_priv;
-- 
2.35.1

[PATCH AUTOSEL 6.0 29/73] s390/netiucv: Fix return type of netiucv_tx()

[Sasha Levin]

From: Nathan Chancellor <nathan@kernel.org>

[ Upstream commit 88d86d18d7cf7e9137c95f9d212bb9fff8a1b4be ]

With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:

  drivers/s390/net/netiucv.c:1854:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
          .ndo_start_xmit         = netiucv_tx,
                                    ^~~~~~~~~~

->ndo_start_xmit() in 'struct net_device_ops' expects a return type of
'netdev_tx_t', not 'int'. Adjust the return type of netiucv_tx() to
match the prototype's to resolve the warning and potential CFI failure,
should s390 select ARCH_SUPPORTS_CFI_CLANG in the future.

Additionally, while in the area, remove a comment block that is no
longer relevant.

Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/net/netiucv.c | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

diff --git a/drivers/s390/net/netiucv.c b/drivers/s390/net/netiucv.c
index 65aa0a96c21d..66076cada8ae 100644
--- a/drivers/s390/net/netiucv.c
+++ b/drivers/s390/net/netiucv.c
@@ -1248,15 +1248,8 @@ static int netiucv_close(struct net_device *dev)
 /*
  * Start transmission of a packet.
  * Called from generic network device layer.
- *
- * @param skb Pointer to buffer containing the packet.
- * @param dev Pointer to interface struct.
- *
- * @return 0 if packet consumed, !0 if packet rejected.
- *         Note: If we return !0, then the packet is free'd by
- *               the generic network layer.
  */
-static int netiucv_tx(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t netiucv_tx(struct sk_buff *skb, struct net_device *dev)
 {
 	struct netiucv_priv *privptr = netdev_priv(dev);
 	int rc;
-- 
2.35.1

[PATCH AUTOSEL 6.0 30/73] s390/lcs: Fix return type of lcs_start_xmit()

[Sasha Levin]

From: Nathan Chancellor <nathan@kernel.org>

[ Upstream commit bb16db8393658e0978c3f0d30ae069e878264fa3 ]

With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:

  drivers/s390/net/lcs.c:2090:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
          .ndo_start_xmit         = lcs_start_xmit,
                                    ^~~~~~~~~~~~~~
  drivers/s390/net/lcs.c:2097:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
          .ndo_start_xmit         = lcs_start_xmit,
                                    ^~~~~~~~~~~~~~

->ndo_start_xmit() in 'struct net_device_ops' expects a return type of
'netdev_tx_t', not 'int'. Adjust the return type of lcs_start_xmit() to
match the prototype's to resolve the warning and potential CFI failure,
should s390 select ARCH_SUPPORTS_CFI_CLANG in the future.

Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/net/lcs.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c
index 84c8981317b4..38f312664ce7 100644
--- a/drivers/s390/net/lcs.c
+++ b/drivers/s390/net/lcs.c
@@ -1519,9 +1519,8 @@ lcs_txbuffer_cb(struct lcs_channel *channel, struct lcs_buffer *buffer)
 /*
  * Packet transmit function called by network stack
  */
-static int
-__lcs_start_xmit(struct lcs_card *card, struct sk_buff *skb,
-		 struct net_device *dev)
+static netdev_tx_t __lcs_start_xmit(struct lcs_card *card, struct sk_buff *skb,
+				    struct net_device *dev)
 {
 	struct lcs_header *header;
 	int rc = NETDEV_TX_OK;
@@ -1582,8 +1581,7 @@ __lcs_start_xmit(struct lcs_card *card, struct sk_buff *skb,
 	return rc;
 }
 
-static int
-lcs_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t lcs_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct lcs_card *card;
 	int rc;
-- 
2.35.1

[PATCH AUTOSEL 6.0 31/73] drm/amd/display: Disable DRR actions during state commit

[Sasha Levin]

From: Wesley Chalmers <Wesley.Chalmers@amd.com>

[ Upstream commit de020e5fa9ebc6fc32e82ae6ccb0282451ed937c ]

[WHY]
Committing a state while performing DRR actions can cause underflow.

[HOW]
Disabled features performing DRR actions during state commit.
Need to follow-up on why DRR actions affect state commit.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c
index fb59fed8f425..9d369155901a 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c
@@ -973,8 +973,5 @@ void dcn30_prepare_bandwidth(struct dc *dc,
 			dc->clk_mgr->funcs->set_max_memclk(dc->clk_mgr, dc->clk_mgr->bw_params->clk_table.entries[dc->clk_mgr->bw_params->clk_table.num_entries - 1].memclk_mhz);
 
 	dcn20_prepare_bandwidth(dc, context);
-
-	dc_dmub_srv_p_state_delegate(dc,
-		context->bw_ctx.bw.dcn.clk.fw_based_mclk_switching, context);
 }
 
-- 
2.35.1

[PATCH AUTOSEL 6.0 32/73] drm/msm: Use drm_mode_copy()

[Sasha Levin]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

[ Upstream commit b2a1c5ca50db22b3677676dd5bad5f6092429acf ]

struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.

Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.

Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.

@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}

@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)

@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)

@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode

Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221107192545.9896-5-ville.syrjala@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/dp/dp_display.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index a49f6dbbe888..c9d9b384ddd0 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -857,7 +857,7 @@ static int dp_display_set_mode(struct msm_dp *dp_display,
 
 	dp = container_of(dp_display, struct dp_display_private, dp_display);
 
-	dp->panel->dp_mode.drm_mode = mode->drm_mode;
+	drm_mode_copy(&dp->panel->dp_mode.drm_mode, &mode->drm_mode);
 	dp->panel->dp_mode.bpp = mode->bpp;
 	dp->panel->dp_mode.capabilities = mode->capabilities;
 	dp_panel_init_panel_info(dp->panel);
-- 
2.35.1

[PATCH AUTOSEL 6.0 33/73] drm/rockchip: Use drm_mode_copy()

[Sasha Levin]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

[ Upstream commit 2bfaa28000d2830d3209161a4541cce0660e1b84 ]

struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.

Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.

Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.

@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}

@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)

@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)

@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20221107192545.9896-7-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/rockchip/cdn-dp-core.c | 2 +-
 drivers/gpu/drm/rockchip/inno_hdmi.c   | 2 +-
 drivers/gpu/drm/rockchip/rk3066_hdmi.c | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.c b/drivers/gpu/drm/rockchip/cdn-dp-core.c
index 518ee13b1d6f..8526dda91931 100644
--- a/drivers/gpu/drm/rockchip/cdn-dp-core.c
+++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c
@@ -571,7 +571,7 @@ static void cdn_dp_encoder_mode_set(struct drm_encoder *encoder,
 	video->v_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NVSYNC);
 	video->h_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NHSYNC);
 
-	memcpy(&dp->mode, adjusted, sizeof(*mode));
+	drm_mode_copy(&dp->mode, adjusted);
 }
 
 static bool cdn_dp_check_link_status(struct cdn_dp_device *dp)
diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c
index 87b2243ea23e..f51774866f41 100644
--- a/drivers/gpu/drm/rockchip/inno_hdmi.c
+++ b/drivers/gpu/drm/rockchip/inno_hdmi.c
@@ -499,7 +499,7 @@ static void inno_hdmi_encoder_mode_set(struct drm_encoder *encoder,
 	inno_hdmi_setup(hdmi, adj_mode);
 
 	/* Store the display mode for plugin/DPMS poweron events */
-	memcpy(&hdmi->previous_mode, adj_mode, sizeof(hdmi->previous_mode));
+	drm_mode_copy(&hdmi->previous_mode, adj_mode);
 }
 
 static void inno_hdmi_encoder_enable(struct drm_encoder *encoder)
diff --git a/drivers/gpu/drm/rockchip/rk3066_hdmi.c b/drivers/gpu/drm/rockchip/rk3066_hdmi.c
index cf2cf51091a3..90145ad96984 100644
--- a/drivers/gpu/drm/rockchip/rk3066_hdmi.c
+++ b/drivers/gpu/drm/rockchip/rk3066_hdmi.c
@@ -395,7 +395,7 @@ rk3066_hdmi_encoder_mode_set(struct drm_encoder *encoder,
 	struct rk3066_hdmi *hdmi = encoder_to_rk3066_hdmi(encoder);
 
 	/* Store the display mode for plugin/DPMS poweron events. */
-	memcpy(&hdmi->previous_mode, adj_mode, sizeof(hdmi->previous_mode));
+	drm_mode_copy(&hdmi->previous_mode, adj_mode);
 }
 
 static void rk3066_hdmi_encoder_enable(struct drm_encoder *encoder)
-- 
2.35.1

[PATCH AUTOSEL 6.0 34/73] drm/sti: Use drm_mode_copy()

[Sasha Levin]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

[ Upstream commit 442cf8e22ba25a77cb9092d78733fdbac9844e50 ]

struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.

Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.

Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.

@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}

@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)

@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)

@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode

Cc: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221107192545.9896-8-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/sti/sti_dvo.c  | 2 +-
 drivers/gpu/drm/sti/sti_hda.c  | 2 +-
 drivers/gpu/drm/sti/sti_hdmi.c | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/sti/sti_dvo.c b/drivers/gpu/drm/sti/sti_dvo.c
index b6ee8a82e656..f3a5616b7daf 100644
--- a/drivers/gpu/drm/sti/sti_dvo.c
+++ b/drivers/gpu/drm/sti/sti_dvo.c
@@ -288,7 +288,7 @@ static void sti_dvo_set_mode(struct drm_bridge *bridge,
 
 	DRM_DEBUG_DRIVER("\n");
 
-	memcpy(&dvo->mode, mode, sizeof(struct drm_display_mode));
+	drm_mode_copy(&dvo->mode, mode);
 
 	/* According to the path used (main or aux), the dvo clocks should
 	 * have a different parent clock. */
diff --git a/drivers/gpu/drm/sti/sti_hda.c b/drivers/gpu/drm/sti/sti_hda.c
index 03cc401ed593..ec6656b9ee7c 100644
--- a/drivers/gpu/drm/sti/sti_hda.c
+++ b/drivers/gpu/drm/sti/sti_hda.c
@@ -524,7 +524,7 @@ static void sti_hda_set_mode(struct drm_bridge *bridge,
 
 	DRM_DEBUG_DRIVER("\n");
 
-	memcpy(&hda->mode, mode, sizeof(struct drm_display_mode));
+	drm_mode_copy(&hda->mode, mode);
 
 	if (!hda_get_mode_idx(hda->mode, &mode_idx)) {
 		DRM_ERROR("Undefined mode\n");
diff --git a/drivers/gpu/drm/sti/sti_hdmi.c b/drivers/gpu/drm/sti/sti_hdmi.c
index cb82622877d2..fcc2194869d6 100644
--- a/drivers/gpu/drm/sti/sti_hdmi.c
+++ b/drivers/gpu/drm/sti/sti_hdmi.c
@@ -941,7 +941,7 @@ static void sti_hdmi_set_mode(struct drm_bridge *bridge,
 	DRM_DEBUG_DRIVER("\n");
 
 	/* Copy the drm display mode in the connector local structure */
-	memcpy(&hdmi->mode, mode, sizeof(struct drm_display_mode));
+	drm_mode_copy(&hdmi->mode, mode);
 
 	/* Update clock framerate according to the selected mode */
 	ret = clk_set_rate(hdmi->clk_pix, mode->clock * 1000);
-- 
2.35.1

[PATCH AUTOSEL 6.0 35/73] drm/mediatek: Fix return type of mtk_hdmi_bridge_mode_valid()

[Sasha Levin]

From: Nathan Chancellor <nathan@kernel.org>

[ Upstream commit 890d637523eec9d730e3885532fa1228ba678880 ]

With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:

  drivers/gpu/drm/mediatek/mtk_hdmi.c:1407:16: error: incompatible function pointer types initializing 'enum drm_mode_status (*)(struct drm_bridge *, const struct drm_display_info *, const struct drm_display_mode *)' with an expression of type 'int (struct drm_bridge *, const struct drm_display_info *, const struct drm_display_mode *)' [-Werror,-Wincompatible-function-pointer-types-strict]
          .mode_valid = mtk_hdmi_bridge_mode_valid,
                        ^~~~~~~~~~~~~~~~~~~~~~~~~~
  1 error generated.

->mode_valid() in 'struct drm_bridge_funcs' expects a return type of
'enum drm_mode_status', not 'int'. Adjust the return type of
mtk_hdmi_bridge_mode_valid() to match the prototype's to resolve the
warning and CFI failure.

Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/mediatek/mtk_hdmi.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi.c b/drivers/gpu/drm/mediatek/mtk_hdmi.c
index 3196189429bc..7613b0fa2be6 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi.c
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi.c
@@ -1203,9 +1203,10 @@ static enum drm_connector_status mtk_hdmi_detect(struct mtk_hdmi *hdmi)
 	return mtk_hdmi_update_plugged_status(hdmi);
 }
 
-static int mtk_hdmi_bridge_mode_valid(struct drm_bridge *bridge,
-				      const struct drm_display_info *info,
-				      const struct drm_display_mode *mode)
+static enum drm_mode_status
+mtk_hdmi_bridge_mode_valid(struct drm_bridge *bridge,
+			   const struct drm_display_info *info,
+			   const struct drm_display_mode *mode)
 {
 	struct mtk_hdmi *hdmi = hdmi_ctx_from_bridge(bridge);
 	struct drm_bridge *next_bridge;
-- 
2.35.1

[PATCH AUTOSEL 6.0 36/73] drivers/md/md-bitmap: check the return value of md_bitmap_get_counter()

[Sasha Levin]

From: Li Zhong <floridsleeves@gmail.com>

[ Upstream commit 3bd548e5b819b8c0f2c9085de775c5c7bff9052f ]

Check the return value of md_bitmap_get_counter() in case it returns
NULL pointer, which will result in a null pointer dereference.

v2: update the check to include other dereference

Signed-off-by: Li Zhong <floridsleeves@gmail.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/md-bitmap.c | 27 +++++++++++++++------------
 1 file changed, 15 insertions(+), 12 deletions(-)

diff --git a/drivers/md/md-bitmap.c b/drivers/md/md-bitmap.c
index bf6dffadbe6f..63ece30114e5 100644
--- a/drivers/md/md-bitmap.c
+++ b/drivers/md/md-bitmap.c
@@ -2195,20 +2195,23 @@ int md_bitmap_resize(struct bitmap *bitmap, sector_t blocks,
 
 		if (set) {
 			bmc_new = md_bitmap_get_counter(&bitmap->counts, block, &new_blocks, 1);
-			if (*bmc_new == 0) {
-				/* need to set on-disk bits too. */
-				sector_t end = block + new_blocks;
-				sector_t start = block >> chunkshift;
-				start <<= chunkshift;
-				while (start < end) {
-					md_bitmap_file_set_bit(bitmap, block);
-					start += 1 << chunkshift;
+			if (bmc_new) {
+				if (*bmc_new == 0) {
+					/* need to set on-disk bits too. */
+					sector_t end = block + new_blocks;
+					sector_t start = block >> chunkshift;
+
+					start <<= chunkshift;
+					while (start < end) {
+						md_bitmap_file_set_bit(bitmap, block);
+						start += 1 << chunkshift;
+					}
+					*bmc_new = 2;
+					md_bitmap_count_page(&bitmap->counts, block, 1);
+					md_bitmap_set_pending(&bitmap->counts, block);
 				}
-				*bmc_new = 2;
-				md_bitmap_count_page(&bitmap->counts, block, 1);
-				md_bitmap_set_pending(&bitmap->counts, block);
+				*bmc_new |= NEEDED_MASK;
 			}
-			*bmc_new |= NEEDED_MASK;
 			if (new_blocks < old_blocks)
 				old_blocks = new_blocks;
 		}
-- 
2.35.1

[PATCH AUTOSEL 6.0 37/73] md/raid0, raid10: Don't set discard sectors for request queue

[Sasha Levin]

From: Xiao Ni <xni@redhat.com>

[ Upstream commit 8e1a2279ca2b0485cc379a153d02a9793f74a48f ]

It should use disk_stack_limits to get a proper max_discard_sectors
rather than setting a value by stack drivers.

And there is a bug. If all member disks are rotational devices,
raid0/raid10 set max_discard_sectors. So the member devices are
not ssd/nvme, but raid0/raid10 export the wrong value. It reports
warning messages in function __blkdev_issue_discard when mkfs.xfs
like this:

[ 4616.022599] ------------[ cut here ]------------
[ 4616.027779] WARNING: CPU: 4 PID: 99634 at block/blk-lib.c:50 __blkdev_issue_discard+0x16a/0x1a0
[ 4616.140663] RIP: 0010:__blkdev_issue_discard+0x16a/0x1a0
[ 4616.146601] Code: 24 4c 89 20 31 c0 e9 fe fe ff ff c1 e8 09 8d 48 ff 4c 89 f0 4c 09 e8 48 85 c1 0f 84 55 ff ff ff b8 ea ff ff ff e9 df fe ff ff <0f> 0b 48 8d 74 24 08 e8 ea d6 00 00 48 c7 c6 20 1e 89 ab 48 c7 c7
[ 4616.167567] RSP: 0018:ffffaab88cbffca8 EFLAGS: 00010246
[ 4616.173406] RAX: ffff9ba1f9e44678 RBX: 0000000000000000 RCX: ffff9ba1c9792080
[ 4616.181376] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9ba1c9792080
[ 4616.189345] RBP: 0000000000000cc0 R08: ffffaab88cbffd10 R09: 0000000000000000
[ 4616.197317] R10: 0000000000000012 R11: 0000000000000000 R12: 0000000000000000
[ 4616.205288] R13: 0000000000400000 R14: 0000000000000cc0 R15: ffff9ba1c9792080
[ 4616.213259] FS:  00007f9a5534e980(0000) GS:ffff9ba1b7c80000(0000) knlGS:0000000000000000
[ 4616.222298] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4616.228719] CR2: 000055a390a4c518 CR3: 0000000123e40006 CR4: 00000000001706e0
[ 4616.236689] Call Trace:
[ 4616.239428]  blkdev_issue_discard+0x52/0xb0
[ 4616.244108]  blkdev_common_ioctl+0x43c/0xa00
[ 4616.248883]  blkdev_ioctl+0x116/0x280
[ 4616.252977]  __x64_sys_ioctl+0x8a/0xc0
[ 4616.257163]  do_syscall_64+0x5c/0x90
[ 4616.261164]  ? handle_mm_fault+0xc5/0x2a0
[ 4616.265652]  ? do_user_addr_fault+0x1d8/0x690
[ 4616.270527]  ? do_syscall_64+0x69/0x90
[ 4616.274717]  ? exc_page_fault+0x62/0x150
[ 4616.279097]  entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 4616.284748] RIP: 0033:0x7f9a55398c6b

Signed-off-by: Xiao Ni <xni@redhat.com>
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/raid0.c  | 1 -
 drivers/md/raid10.c | 2 --
 2 files changed, 3 deletions(-)

diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index 857c49399c28..b536befd8898 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -398,7 +398,6 @@ static int raid0_run(struct mddev *mddev)
 
 		blk_queue_max_hw_sectors(mddev->queue, mddev->chunk_sectors);
 		blk_queue_max_write_zeroes_sectors(mddev->queue, mddev->chunk_sectors);
-		blk_queue_max_discard_sectors(mddev->queue, UINT_MAX);
 
 		blk_queue_io_min(mddev->queue, mddev->chunk_sectors << 9);
 		blk_queue_io_opt(mddev->queue,
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 64d6e4cd8a3a..b19c6ce89d5e 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -4104,8 +4104,6 @@ static int raid10_run(struct mddev *mddev)
 	conf->thread = NULL;
 
 	if (mddev->queue) {
-		blk_queue_max_discard_sectors(mddev->queue,
-					      UINT_MAX);
 		blk_queue_max_write_zeroes_sectors(mddev->queue, 0);
 		blk_queue_io_min(mddev->queue, mddev->chunk_sectors << 9);
 		raid10_set_io_opt(conf);
-- 
2.35.1

[PATCH AUTOSEL 6.0 38/73] md/raid1: stop mdx_raid1 thread when raid1 array run failed

[Sasha Levin]

From: Jiang Li <jiang.li@ugreen.com>

[ Upstream commit b611ad14006e5be2170d9e8e611bf49dff288911 ]

fail run raid1 array when we assemble array with the inactive disk only,
but the mdx_raid1 thread were not stop, Even if the associated resources
have been released. it will caused a NULL dereference when we do poweroff.

This causes the following Oops:
    [  287.587787] BUG: kernel NULL pointer dereference, address: 0000000000000070
    [  287.594762] #PF: supervisor read access in kernel mode
    [  287.599912] #PF: error_code(0x0000) - not-present page
    [  287.605061] PGD 0 P4D 0
    [  287.607612] Oops: 0000 [#1] SMP NOPTI
    [  287.611287] CPU: 3 PID: 5265 Comm: md0_raid1 Tainted: G     U            5.10.146 #0
    [  287.619029] Hardware name: xxxxxxx/To be filled by O.E.M, BIOS 5.19 06/16/2022
    [  287.626775] RIP: 0010:md_check_recovery+0x57/0x500 [md_mod]
    [  287.632357] Code: fe 01 00 00 48 83 bb 10 03 00 00 00 74 08 48 89 ......
    [  287.651118] RSP: 0018:ffffc90000433d78 EFLAGS: 00010202
    [  287.656347] RAX: 0000000000000000 RBX: ffff888105986800 RCX: 0000000000000000
    [  287.663491] RDX: ffffc90000433bb0 RSI: 00000000ffffefff RDI: ffff888105986800
    [  287.670634] RBP: ffffc90000433da0 R08: 0000000000000000 R09: c0000000ffffefff
    [  287.677771] R10: 0000000000000001 R11: ffffc90000433ba8 R12: ffff888105986800
    [  287.684907] R13: 0000000000000000 R14: fffffffffffffe00 R15: ffff888100b6b500
    [  287.692052] FS:  0000000000000000(0000) GS:ffff888277f80000(0000) knlGS:0000000000000000
    [  287.700149] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    [  287.705897] CR2: 0000000000000070 CR3: 000000000320a000 CR4: 0000000000350ee0
    [  287.713033] Call Trace:
    [  287.715498]  raid1d+0x6c/0xbbb [raid1]
    [  287.719256]  ? __schedule+0x1ff/0x760
    [  287.722930]  ? schedule+0x3b/0xb0
    [  287.726260]  ? schedule_timeout+0x1ed/0x290
    [  287.730456]  ? __switch_to+0x11f/0x400
    [  287.734219]  md_thread+0xe9/0x140 [md_mod]
    [  287.738328]  ? md_thread+0xe9/0x140 [md_mod]
    [  287.742601]  ? wait_woken+0x80/0x80
    [  287.746097]  ? md_register_thread+0xe0/0xe0 [md_mod]
    [  287.751064]  kthread+0x11a/0x140
    [  287.754300]  ? kthread_park+0x90/0x90
    [  287.757974]  ret_from_fork+0x1f/0x30

In fact, when raid1 array run fail, we need to do
md_unregister_thread() before raid1_free().

Signed-off-by: Jiang Li <jiang.li@ugreen.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/raid1.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 05d8438cfec8..58f705f42948 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -3159,6 +3159,7 @@ static int raid1_run(struct mddev *mddev)
 	 * RAID1 needs at least one disk in active
 	 */
 	if (conf->raid_disks - mddev->degraded < 1) {
+		md_unregister_thread(&conf->thread);
 		ret = -EINVAL;
 		goto abort;
 	}
-- 
2.35.1

[PATCH AUTOSEL 6.0 39/73] drm/amd/display: Workaround to increase phantom pipe vactive in pipesplit

[Sasha Levin]

From: George Shen <george.shen@amd.com>

[ Upstream commit 5b8f9deaf3b6badfc0da968e6e07ceabd19700b6 ]

[Why]
Certain high resolution displays exhibit DCC line corruption with SubVP
enabled. This is likely due to insufficient DCC meta data buffered
immediately after the mclk switch.

[How]
Add workaround to increase phantom pipe vactive height by
meta_row_height number of lines, thus increasing the amount of meta data
buffered immediately after mclk switch finishes.

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
index 07c56e231b04..d05df4f7139f 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
@@ -485,9 +485,11 @@ void dcn32_set_phantom_stream_timing(struct dc *dc,
 	unsigned int i, pipe_idx;
 	struct pipe_ctx *pipe;
 	uint32_t phantom_vactive, phantom_bp, pstate_width_fw_delay_lines;
+	unsigned int num_dpp;
 	unsigned int vlevel = context->bw_ctx.dml.vba.VoltageLevel;
 	unsigned int dcfclk = context->bw_ctx.dml.vba.DCFCLKState[vlevel][context->bw_ctx.dml.vba.maxMpcComb];
 	unsigned int socclk = context->bw_ctx.dml.vba.SOCCLKPerState[vlevel];
+	struct vba_vars_st *vba = &context->bw_ctx.dml.vba;
 
 	dc_assert_fp_enabled();
 
@@ -523,6 +525,11 @@ void dcn32_set_phantom_stream_timing(struct dc *dc,
 	phantom_vactive = get_subviewport_lines_needed_in_mall(&context->bw_ctx.dml, pipes, pipe_cnt, pipe_idx) +
 				pstate_width_fw_delay_lines + dc->caps.subvp_swath_height_margin_lines;
 
+	// W/A for DCC corruption with certain high resolution timings.
+	// Determing if pipesplit is used. If so, add meta_row_height to the phantom vactive.
+	num_dpp = vba->NoOfDPP[vba->VoltageLevel][vba->maxMpcComb][vba->pipe_plane[pipe_idx]];
+	phantom_vactive += num_dpp > 1 ? vba->meta_row_height[vba->pipe_plane[pipe_idx]] : 0;
+
 	// For backporch of phantom pipe, use vstartup of the main pipe
 	phantom_bp = get_vstartup(&context->bw_ctx.dml, pipes, pipe_cnt, pipe_idx);
 
-- 
2.35.1

[PATCH AUTOSEL 6.0 40/73] drm/amd/display: fix array index out of bound error in bios parser

[Sasha Levin]

From: Aurabindo Pillai <aurabindo.pillai@amd.com>

[ Upstream commit 4fc1ba4aa589ca267468ad23fedef37562227d32 ]

[Why&How]
Firmware headers dictate that gpio_pin array only has a size of 8. The
count returned from vbios however is greater than 8.

Fix this by not using array indexing but incrementing the pointer since
gpio_pin definition in atomfirmware.h is hardcoded to size 8

Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/display/dc/bios/bios_parser2.c   | 16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c b/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c
index de3a1f3fd4f1..c98cd7c5b9f7 100644
--- a/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c
+++ b/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c
@@ -487,6 +487,7 @@ static enum bp_result get_gpio_i2c_info(
 	uint32_t count = 0;
 	unsigned int table_index = 0;
 	bool find_valid = false;
+	struct atom_gpio_pin_assignment *pin;
 
 	if (!info)
 		return BP_RESULT_BADINPUT;
@@ -514,20 +515,17 @@ static enum bp_result get_gpio_i2c_info(
 			- sizeof(struct atom_common_table_header))
 				/ sizeof(struct atom_gpio_pin_assignment);
 
+	pin = (struct atom_gpio_pin_assignment *) header->gpio_pin;
+
 	for (table_index = 0; table_index < count; table_index++) {
-		if (((record->i2c_id & I2C_HW_CAP) == (
-		header->gpio_pin[table_index].gpio_id &
-						I2C_HW_CAP)) &&
-		((record->i2c_id & I2C_HW_ENGINE_ID_MASK)  ==
-		(header->gpio_pin[table_index].gpio_id &
-					I2C_HW_ENGINE_ID_MASK)) &&
-		((record->i2c_id & I2C_HW_LANE_MUX) ==
-		(header->gpio_pin[table_index].gpio_id &
-						I2C_HW_LANE_MUX))) {
+		if (((record->i2c_id & I2C_HW_CAP) 				== (pin->gpio_id & I2C_HW_CAP)) &&
+		    ((record->i2c_id & I2C_HW_ENGINE_ID_MASK)	== (pin->gpio_id & I2C_HW_ENGINE_ID_MASK)) &&
+		    ((record->i2c_id & I2C_HW_LANE_MUX) 		== (pin->gpio_id & I2C_HW_LANE_MUX))) {
 			/* still valid */
 			find_valid = true;
 			break;
 		}
+		pin = (struct atom_gpio_pin_assignment *)((uint8_t *)pin + sizeof(struct atom_gpio_pin_assignment));
 	}
 
 	/* If we don't find the entry that we are looking for then
-- 
2.35.1

[PATCH AUTOSEL 6.0 41/73] nvme-auth: don't override ctrl keys before validation

[Sasha Levin]

From: Sagi Grimberg <sagi@grimberg.me>

[ Upstream commit 01604350e14560d4d69323eb1ba12a257a643ea8 ]

Replace ctrl ctrl_key/host_key only after nvme_auth_generate_key is successful.
Also, this fixes a bug where the keys are leaked.

Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index aca50bb93750..5413d58b3f2c 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -3739,13 +3739,17 @@ static ssize_t nvme_ctrl_dhchap_secret_store(struct device *dev,
 	memcpy(dhchap_secret, buf, count);
 	nvme_auth_stop(ctrl);
 	if (strcmp(dhchap_secret, opts->dhchap_secret)) {
+		struct nvme_dhchap_key *key, *host_key;
 		int ret;
 
-		ret = nvme_auth_generate_key(dhchap_secret, &ctrl->host_key);
+		ret = nvme_auth_generate_key(dhchap_secret, &key);
 		if (ret)
 			return ret;
 		kfree(opts->dhchap_secret);
 		opts->dhchap_secret = dhchap_secret;
+		host_key = ctrl->host_key;
+		ctrl->host_key = key;
+		nvme_auth_free_key(host_key);
 		/* Key has changed; re-authentication with new key */
 		nvme_auth_reset(ctrl);
 	}
@@ -3789,13 +3793,17 @@ static ssize_t nvme_ctrl_dhchap_ctrl_secret_store(struct device *dev,
 	memcpy(dhchap_secret, buf, count);
 	nvme_auth_stop(ctrl);
 	if (strcmp(dhchap_secret, opts->dhchap_ctrl_secret)) {
+		struct nvme_dhchap_key *key, *ctrl_key;
 		int ret;
 
-		ret = nvme_auth_generate_key(dhchap_secret, &ctrl->ctrl_key);
+		ret = nvme_auth_generate_key(dhchap_secret, &key);
 		if (ret)
 			return ret;
 		kfree(opts->dhchap_ctrl_secret);
 		opts->dhchap_ctrl_secret = dhchap_secret;
+		ctrl_key = ctrl->ctrl_key;
+		ctrl->ctrl_key = key;
+		nvme_auth_free_key(ctrl_key);
 		/* Key has changed; re-authentication with new key */
 		nvme_auth_reset(ctrl);
 	}
-- 
2.35.1

[PATCH AUTOSEL 6.0 42/73] net: add atomic_long_t to net_device_stats fields

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 6c1c5097781f563b70a81683ea6fdac21637573b ]

Long standing KCSAN issues are caused by data-race around
some dev->stats changes.

Most performance critical paths already use per-cpu
variables, or per-queue ones.

It is reasonable (and more correct) to use atomic operations
for the slow paths.

This patch adds an union for each field of net_device_stats,
so that we can convert paths that are not yet protected
by a spinlock or a mutex.

netdev_stats_to_stats64() no longer has an #if BITS_PER_LONG==64

Note that the memcpy() we were using on 64bit arches
had no provision to avoid load-tearing,
while atomic_long_read() is providing the needed protection
at no cost.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/netdevice.h | 58 +++++++++++++++++++++++----------------
 include/net/dst.h         |  5 ++--
 net/core/dev.c            | 14 ++--------
 3 files changed, 40 insertions(+), 37 deletions(-)

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 05d6f3facd5a..47b8b0ab7694 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -171,31 +171,38 @@ static inline bool dev_xmit_complete(int rc)
  *	(unsigned long) so they can be read and written atomically.
  */
 
+#define NET_DEV_STAT(FIELD)			\
+	union {					\
+		unsigned long FIELD;		\
+		atomic_long_t __##FIELD;	\
+	}
+
 struct net_device_stats {
-	unsigned long	rx_packets;
-	unsigned long	tx_packets;
-	unsigned long	rx_bytes;
-	unsigned long	tx_bytes;
-	unsigned long	rx_errors;
-	unsigned long	tx_errors;
-	unsigned long	rx_dropped;
-	unsigned long	tx_dropped;
-	unsigned long	multicast;
-	unsigned long	collisions;
-	unsigned long	rx_length_errors;
-	unsigned long	rx_over_errors;
-	unsigned long	rx_crc_errors;
-	unsigned long	rx_frame_errors;
-	unsigned long	rx_fifo_errors;
-	unsigned long	rx_missed_errors;
-	unsigned long	tx_aborted_errors;
-	unsigned long	tx_carrier_errors;
-	unsigned long	tx_fifo_errors;
-	unsigned long	tx_heartbeat_errors;
-	unsigned long	tx_window_errors;
-	unsigned long	rx_compressed;
-	unsigned long	tx_compressed;
+	NET_DEV_STAT(rx_packets);
+	NET_DEV_STAT(tx_packets);
+	NET_DEV_STAT(rx_bytes);
+	NET_DEV_STAT(tx_bytes);
+	NET_DEV_STAT(rx_errors);
+	NET_DEV_STAT(tx_errors);
+	NET_DEV_STAT(rx_dropped);
+	NET_DEV_STAT(tx_dropped);
+	NET_DEV_STAT(multicast);
+	NET_DEV_STAT(collisions);
+	NET_DEV_STAT(rx_length_errors);
+	NET_DEV_STAT(rx_over_errors);
+	NET_DEV_STAT(rx_crc_errors);
+	NET_DEV_STAT(rx_frame_errors);
+	NET_DEV_STAT(rx_fifo_errors);
+	NET_DEV_STAT(rx_missed_errors);
+	NET_DEV_STAT(tx_aborted_errors);
+	NET_DEV_STAT(tx_carrier_errors);
+	NET_DEV_STAT(tx_fifo_errors);
+	NET_DEV_STAT(tx_heartbeat_errors);
+	NET_DEV_STAT(tx_window_errors);
+	NET_DEV_STAT(rx_compressed);
+	NET_DEV_STAT(tx_compressed);
 };
+#undef NET_DEV_STAT
 
 /* per-cpu stats, allocated on demand.
  * Try to fit them in a single cache line, for dev_get_stats() sake.
@@ -5143,4 +5150,9 @@ extern struct list_head ptype_base[PTYPE_HASH_SIZE] __read_mostly;
 
 extern struct net_device *blackhole_netdev;
 
+/* Note: Avoid these macros in fast path, prefer per-cpu or per-queue counters. */
+#define DEV_STATS_INC(DEV, FIELD) atomic_long_inc(&(DEV)->stats.__##FIELD)
+#define DEV_STATS_ADD(DEV, FIELD, VAL) 	\
+		atomic_long_add((VAL), &(DEV)->stats.__##FIELD)
+
 #endif	/* _LINUX_NETDEVICE_H */
diff --git a/include/net/dst.h b/include/net/dst.h
index 6aa252c3fc55..19af7a2713cc 100644
--- a/include/net/dst.h
+++ b/include/net/dst.h
@@ -362,9 +362,8 @@ static inline void __skb_tunnel_rx(struct sk_buff *skb, struct net_device *dev,
 static inline void skb_tunnel_rx(struct sk_buff *skb, struct net_device *dev,
 				 struct net *net)
 {
-	/* TODO : stats should be SMP safe */
-	dev->stats.rx_packets++;
-	dev->stats.rx_bytes += skb->len;
+	DEV_STATS_INC(dev, rx_packets);
+	DEV_STATS_ADD(dev, rx_bytes, skb->len);
 	__skb_tunnel_rx(skb, dev, net);
 }
 
diff --git a/net/core/dev.c b/net/core/dev.c
index 2c14f48d2457..4c4564a9a758 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -10398,24 +10398,16 @@ void netdev_run_todo(void)
 void netdev_stats_to_stats64(struct rtnl_link_stats64 *stats64,
 			     const struct net_device_stats *netdev_stats)
 {
-#if BITS_PER_LONG == 64
-	BUILD_BUG_ON(sizeof(*stats64) < sizeof(*netdev_stats));
-	memcpy(stats64, netdev_stats, sizeof(*netdev_stats));
-	/* zero out counters that only exist in rtnl_link_stats64 */
-	memset((char *)stats64 + sizeof(*netdev_stats), 0,
-	       sizeof(*stats64) - sizeof(*netdev_stats));
-#else
-	size_t i, n = sizeof(*netdev_stats) / sizeof(unsigned long);
-	const unsigned long *src = (const unsigned long *)netdev_stats;
+	size_t i, n = sizeof(*netdev_stats) / sizeof(atomic_long_t);
+	const atomic_long_t *src = (atomic_long_t *)netdev_stats;
 	u64 *dst = (u64 *)stats64;
 
 	BUILD_BUG_ON(n > sizeof(*stats64) / sizeof(u64));
 	for (i = 0; i < n; i++)
-		dst[i] = src[i];
+		dst[i] = atomic_long_read(&src[i]);
 	/* zero out counters that only exist in rtnl_link_stats64 */
 	memset((char *)stats64 + n * sizeof(u64), 0,
 	       sizeof(*stats64) - n * sizeof(u64));
-#endif
 }
 EXPORT_SYMBOL(netdev_stats_to_stats64);
 
-- 
2.35.1

[PATCH AUTOSEL 6.0 43/73] ipv6/sit: use DEV_STATS_INC() to avoid data-races

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit cb34b7cf17ecf33499c9298943f85af247abc1e9 ]

syzbot/KCSAN reported that multiple cpus are updating dev->stats.tx_error
concurrently.

This is because sit tunnels are NETIF_F_LLTX, meaning their ndo_start_xmit()
is not protected by a spinlock.

While original KCSAN report was about tx path, rx path has the same issue.

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/sit.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c
index 59b2d9a6210c..ccb39b1e730f 100644
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -694,7 +694,7 @@ static int ipip6_rcv(struct sk_buff *skb)
 		skb->dev = tunnel->dev;
 
 		if (packet_is_spoofed(skb, iph, tunnel)) {
-			tunnel->dev->stats.rx_errors++;
+			DEV_STATS_INC(tunnel->dev, rx_errors);
 			goto out;
 		}
 
@@ -714,8 +714,8 @@ static int ipip6_rcv(struct sk_buff *skb)
 				net_info_ratelimited("non-ECT from %pI4 with TOS=%#x\n",
 						     &iph->saddr, iph->tos);
 			if (err > 1) {
-				++tunnel->dev->stats.rx_frame_errors;
-				++tunnel->dev->stats.rx_errors;
+				DEV_STATS_INC(tunnel->dev, rx_frame_errors);
+				DEV_STATS_INC(tunnel->dev, rx_errors);
 				goto out;
 			}
 		}
@@ -942,7 +942,7 @@ static netdev_tx_t ipip6_tunnel_xmit(struct sk_buff *skb,
 	if (!rt) {
 		rt = ip_route_output_flow(tunnel->net, &fl4, NULL);
 		if (IS_ERR(rt)) {
-			dev->stats.tx_carrier_errors++;
+			DEV_STATS_INC(dev, tx_carrier_errors);
 			goto tx_error_icmp;
 		}
 		dst_cache_set_ip4(&tunnel->dst_cache, &rt->dst, fl4.saddr);
@@ -950,14 +950,14 @@ static netdev_tx_t ipip6_tunnel_xmit(struct sk_buff *skb,
 
 	if (rt->rt_type != RTN_UNICAST && rt->rt_type != RTN_LOCAL) {
 		ip_rt_put(rt);
-		dev->stats.tx_carrier_errors++;
+		DEV_STATS_INC(dev, tx_carrier_errors);
 		goto tx_error_icmp;
 	}
 	tdev = rt->dst.dev;
 
 	if (tdev == dev) {
 		ip_rt_put(rt);
-		dev->stats.collisions++;
+		DEV_STATS_INC(dev, collisions);
 		goto tx_error;
 	}
 
@@ -970,7 +970,7 @@ static netdev_tx_t ipip6_tunnel_xmit(struct sk_buff *skb,
 		mtu = dst_mtu(&rt->dst) - t_hlen;
 
 		if (mtu < IPV4_MIN_MTU) {
-			dev->stats.collisions++;
+			DEV_STATS_INC(dev, collisions);
 			ip_rt_put(rt);
 			goto tx_error;
 		}
@@ -1009,7 +1009,7 @@ static netdev_tx_t ipip6_tunnel_xmit(struct sk_buff *skb,
 		struct sk_buff *new_skb = skb_realloc_headroom(skb, max_headroom);
 		if (!new_skb) {
 			ip_rt_put(rt);
-			dev->stats.tx_dropped++;
+			DEV_STATS_INC(dev, tx_dropped);
 			kfree_skb(skb);
 			return NETDEV_TX_OK;
 		}
@@ -1039,7 +1039,7 @@ static netdev_tx_t ipip6_tunnel_xmit(struct sk_buff *skb,
 	dst_link_failure(skb);
 tx_error:
 	kfree_skb(skb);
-	dev->stats.tx_errors++;
+	DEV_STATS_INC(dev, tx_errors);
 	return NETDEV_TX_OK;
 }
 
@@ -1058,7 +1058,7 @@ static netdev_tx_t sit_tunnel_xmit__(struct sk_buff *skb,
 	return NETDEV_TX_OK;
 tx_error:
 	kfree_skb(skb);
-	dev->stats.tx_errors++;
+	DEV_STATS_INC(dev, tx_errors);
 	return NETDEV_TX_OK;
 }
 
@@ -1087,7 +1087,7 @@ static netdev_tx_t sit_tunnel_xmit(struct sk_buff *skb,
 	return NETDEV_TX_OK;
 
 tx_err:
-	dev->stats.tx_errors++;
+	DEV_STATS_INC(dev, tx_errors);
 	kfree_skb(skb);
 	return NETDEV_TX_OK;
 
-- 
2.35.1

[PATCH AUTOSEL 6.0 44/73] mrp: introduce active flags to prevent UAF when applicant uninit

[Sasha Levin]

From: Schspa Shi <schspa@gmail.com>

[ Upstream commit ab0377803dafc58f1e22296708c1c28e309414d6 ]

The caller of del_timer_sync must prevent restarting of the timer, If
we have no this synchronization, there is a small probability that the
cancellation will not be successful.

And syzbot report the fellowing crash:
==================================================================
BUG: KASAN: use-after-free in hlist_add_head include/linux/list.h:929 [inline]
BUG: KASAN: use-after-free in enqueue_timer+0x18/0xa4 kernel/time/timer.c:605
Write at addr f9ff000024df6058 by task syz-fuzzer/2256
Pointer tag: [f9], memory tag: [fe]

CPU: 1 PID: 2256 Comm: syz-fuzzer Not tainted 6.1.0-rc5-syzkaller-00008-
ge01d50cbd6ee #0
Hardware name: linux,dummy-virt (DT)
Call trace:
 dump_backtrace.part.0+0xe0/0xf0 arch/arm64/kernel/stacktrace.c:156
 dump_backtrace arch/arm64/kernel/stacktrace.c:162 [inline]
 show_stack+0x18/0x40 arch/arm64/kernel/stacktrace.c:163
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x68/0x84 lib/dump_stack.c:106
 print_address_description mm/kasan/report.c:284 [inline]
 print_report+0x1a8/0x4a0 mm/kasan/report.c:395
 kasan_report+0x94/0xb4 mm/kasan/report.c:495
 __do_kernel_fault+0x164/0x1e0 arch/arm64/mm/fault.c:320
 do_bad_area arch/arm64/mm/fault.c:473 [inline]
 do_tag_check_fault+0x78/0x8c arch/arm64/mm/fault.c:749
 do_mem_abort+0x44/0x94 arch/arm64/mm/fault.c:825
 el1_abort+0x40/0x60 arch/arm64/kernel/entry-common.c:367
 el1h_64_sync_handler+0xd8/0xe4 arch/arm64/kernel/entry-common.c:427
 el1h_64_sync+0x64/0x68 arch/arm64/kernel/entry.S:576
 hlist_add_head include/linux/list.h:929 [inline]
 enqueue_timer+0x18/0xa4 kernel/time/timer.c:605
 mod_timer+0x14/0x20 kernel/time/timer.c:1161
 mrp_periodic_timer_arm net/802/mrp.c:614 [inline]
 mrp_periodic_timer+0xa0/0xc0 net/802/mrp.c:627
 call_timer_fn.constprop.0+0x24/0x80 kernel/time/timer.c:1474
 expire_timers+0x98/0xc4 kernel/time/timer.c:1519

To fix it, we can introduce a new active flags to make sure the timer will
not restart.

Reported-by: syzbot+6fd64001c20aa99e34a4@syzkaller.appspotmail.com

Signed-off-by: Schspa Shi <schspa@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/mrp.h |  1 +
 net/802/mrp.c     | 18 +++++++++++++-----
 2 files changed, 14 insertions(+), 5 deletions(-)

diff --git a/include/net/mrp.h b/include/net/mrp.h
index 92cd3fb6cf9d..b28915ffea28 100644
--- a/include/net/mrp.h
+++ b/include/net/mrp.h
@@ -124,6 +124,7 @@ struct mrp_applicant {
 	struct sk_buff		*pdu;
 	struct rb_root		mad;
 	struct rcu_head		rcu;
+	bool			active;
 };
 
 struct mrp_port {
diff --git a/net/802/mrp.c b/net/802/mrp.c
index 35e04cc5390c..c10a432a5b43 100644
--- a/net/802/mrp.c
+++ b/net/802/mrp.c
@@ -606,7 +606,10 @@ static void mrp_join_timer(struct timer_list *t)
 	spin_unlock(&app->lock);
 
 	mrp_queue_xmit(app);
-	mrp_join_timer_arm(app);
+	spin_lock(&app->lock);
+	if (likely(app->active))
+		mrp_join_timer_arm(app);
+	spin_unlock(&app->lock);
 }
 
 static void mrp_periodic_timer_arm(struct mrp_applicant *app)
@@ -620,11 +623,12 @@ static void mrp_periodic_timer(struct timer_list *t)
 	struct mrp_applicant *app = from_timer(app, t, periodic_timer);
 
 	spin_lock(&app->lock);
-	mrp_mad_event(app, MRP_EVENT_PERIODIC);
-	mrp_pdu_queue(app);
+	if (likely(app->active)) {
+		mrp_mad_event(app, MRP_EVENT_PERIODIC);
+		mrp_pdu_queue(app);
+		mrp_periodic_timer_arm(app);
+	}
 	spin_unlock(&app->lock);
-
-	mrp_periodic_timer_arm(app);
 }
 
 static int mrp_pdu_parse_end_mark(struct sk_buff *skb, int *offset)
@@ -872,6 +876,7 @@ int mrp_init_applicant(struct net_device *dev, struct mrp_application *appl)
 	app->dev = dev;
 	app->app = appl;
 	app->mad = RB_ROOT;
+	app->active = true;
 	spin_lock_init(&app->lock);
 	skb_queue_head_init(&app->queue);
 	rcu_assign_pointer(dev->mrp_port->applicants[appl->type], app);
@@ -900,6 +905,9 @@ void mrp_uninit_applicant(struct net_device *dev, struct mrp_application *appl)
 
 	RCU_INIT_POINTER(port->applicants[appl->type], NULL);
 
+	spin_lock_bh(&app->lock);
+	app->active = false;
+	spin_unlock_bh(&app->lock);
 	/* Delete timer and generate a final TX event to flush out
 	 * all pending messages before the applicant is gone.
 	 */
-- 
2.35.1

[PATCH AUTOSEL 6.0 45/73] net: ethernet: mtk_eth_soc: drop packets to WDMA if the ring is full

[Sasha Levin]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit f4b2fa2c25e1ade78f766aa82e733a0b5198d484 ]

Improves handling of DMA ring overflow.
Clarify other WDMA drop related comment.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20221116080734.44013-3-nbd@nbd.name
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mediatek/mtk_eth_soc.c | 5 ++++-
 drivers/net/ethernet/mediatek/mtk_eth_soc.h | 1 +
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 5380caf0acc2..27e178599ffd 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -3311,9 +3311,12 @@ static int mtk_hw_init(struct mtk_eth *eth)
 	mtk_w32(eth, 0x21021000, MTK_FE_INT_GRP);
 
 	if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) {
-		/* PSE should not drop port8 and port9 packets */
+		/* PSE should not drop port8 and port9 packets from WDMA Tx */
 		mtk_w32(eth, 0x00000300, PSE_DROP_CFG);
 
+		/* PSE should drop packets to port 8/9 on WDMA Rx ring full */
+		mtk_w32(eth, 0x00000300, PSE_PPE0_DROP);
+
 		/* PSE Free Queue Flow Control  */
 		mtk_w32(eth, 0x01fa01f4, PSE_FQFC_CFG2);
 
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
index 0f9668a4079d..1c2a5fece126 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -121,6 +121,7 @@
 #define PSE_FQFC_CFG1		0x100
 #define PSE_FQFC_CFG2		0x104
 #define PSE_DROP_CFG		0x108
+#define PSE_PPE0_DROP		0x110
 
 /* PSE Input Queue Reservation Register*/
 #define PSE_IQ_REV(x)		(0x140 + (((x) - 1) << 2))
-- 
2.35.1

[PATCH AUTOSEL 6.0 46/73] ppp: associate skb with a device at tx

[Sasha Levin]

From: Stanislav Fomichev <sdf@google.com>

[ Upstream commit 9f225444467b98579cf28d94f4ad053460dfdb84 ]

Syzkaller triggered flow dissector warning with the following:

r0 = openat$ppp(0xffffffffffffff9c, &(0x7f0000000000), 0xc0802, 0x0)
ioctl$PPPIOCNEWUNIT(r0, 0xc004743e, &(0x7f00000000c0))
ioctl$PPPIOCSACTIVE(r0, 0x40107446, &(0x7f0000000240)={0x2, &(0x7f0000000180)=[{0x20, 0x0, 0x0, 0xfffff034}, {0x6}]})
pwritev(r0, &(0x7f0000000040)=[{&(0x7f0000000140)='\x00!', 0x2}], 0x1, 0x0, 0x0)

[    9.485814] WARNING: CPU: 3 PID: 329 at net/core/flow_dissector.c:1016 __skb_flow_dissect+0x1ee0/0x1fa0
[    9.485929]  skb_get_poff+0x53/0xa0
[    9.485937]  bpf_skb_get_pay_offset+0xe/0x20
[    9.485944]  ? ppp_send_frame+0xc2/0x5b0
[    9.485949]  ? _raw_spin_unlock_irqrestore+0x40/0x60
[    9.485958]  ? __ppp_xmit_process+0x7a/0xe0
[    9.485968]  ? ppp_xmit_process+0x5b/0xb0
[    9.485974]  ? ppp_write+0x12a/0x190
[    9.485981]  ? do_iter_write+0x18e/0x2d0
[    9.485987]  ? __import_iovec+0x30/0x130
[    9.485997]  ? do_pwritev+0x1b6/0x240
[    9.486016]  ? trace_hardirqs_on+0x47/0x50
[    9.486023]  ? __x64_sys_pwritev+0x24/0x30
[    9.486026]  ? do_syscall_64+0x3d/0x80
[    9.486031]  ? entry_SYSCALL_64_after_hwframe+0x63/0xcd

Flow dissector tries to find skb net namespace either via device
or via socket. Neigher is set in ppp_send_frame, so let's manually
use ppp->dev.

Cc: Paul Mackerras <paulus@samba.org>
Cc: linux-ppp@vger.kernel.org
Reported-by: syzbot+41cab52ab62ee99ed24a@syzkaller.appspotmail.com
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ppp/ppp_generic.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ppp/ppp_generic.c b/drivers/net/ppp/ppp_generic.c
index 9206c660a72e..d4c821c8cf57 100644
--- a/drivers/net/ppp/ppp_generic.c
+++ b/drivers/net/ppp/ppp_generic.c
@@ -1743,6 +1743,8 @@ ppp_send_frame(struct ppp *ppp, struct sk_buff *skb)
 	int len;
 	unsigned char *cp;
 
+	skb->dev = ppp->dev;
+
 	if (proto < 0x8000) {
 #ifdef CONFIG_PPP_FILTER
 		/* check if we should pass this packet */
-- 
2.35.1

[PATCH AUTOSEL 6.0 47/73] bpf: Fix a BTF_ID_LIST bug with CONFIG_DEBUG_INFO_BTF not set

[Sasha Levin]

From: Yonghong Song <yhs@fb.com>

[ Upstream commit beb3d47d1d3d7185bb401af628ad32ee204a9526 ]

With CONFIG_DEBUG_INFO_BTF not set, we hit the following compilation error,
  /.../kernel/bpf/verifier.c:8196:23: error: array index 6 is past the end of the array
  (that has type 'u32[5]' (aka 'unsigned int[5]')) [-Werror,-Warray-bounds]
        if (meta->func_id == special_kfunc_list[KF_bpf_cast_to_kern_ctx])
                             ^                  ~~~~~~~~~~~~~~~~~~~~~~~
  /.../kernel/bpf/verifier.c:8174:1: note: array 'special_kfunc_list' declared here
  BTF_ID_LIST(special_kfunc_list)
  ^
  /.../include/linux/btf_ids.h:207:27: note: expanded from macro 'BTF_ID_LIST'
  #define BTF_ID_LIST(name) static u32 __maybe_unused name[5];
                            ^
  /.../kernel/bpf/verifier.c:8443:19: error: array index 5 is past the end of the array
  (that has type 'u32[5]' (aka 'unsigned int[5]')) [-Werror,-Warray-bounds]
                 btf_id == special_kfunc_list[KF_bpf_list_pop_back];
                           ^                  ~~~~~~~~~~~~~~~~~~~~
  /.../kernel/bpf/verifier.c:8174:1: note: array 'special_kfunc_list' declared here
  BTF_ID_LIST(special_kfunc_list)
  ^
  /.../include/linux/btf_ids.h:207:27: note: expanded from macro 'BTF_ID_LIST'
  #define BTF_ID_LIST(name) static u32 __maybe_unused name[5];
  ...

Fix the problem by increase the size of BTF_ID_LIST to 16 to avoid compilation error
and also prevent potentially unintended issue due to out-of-bound access.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221123155759.2669749-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/btf_ids.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/btf_ids.h b/include/linux/btf_ids.h
index 2aea877d644f..2b9872008428 100644
--- a/include/linux/btf_ids.h
+++ b/include/linux/btf_ids.h
@@ -204,7 +204,7 @@ extern struct btf_id_set8 name;
 
 #else
 
-#define BTF_ID_LIST(name) static u32 __maybe_unused name[5];
+#define BTF_ID_LIST(name) static u32 __maybe_unused name[16];
 #define BTF_ID(prefix, name)
 #define BTF_ID_FLAGS(prefix, name, ...)
 #define BTF_ID_UNUSED
-- 
2.35.1

[PATCH AUTOSEL 6.0 48/73] bpf: Prevent decl_tag from being referenced in func_proto arg

[Sasha Levin]

From: Stanislav Fomichev <sdf@google.com>

[ Upstream commit f17472d4599697d701aa239b4c475a506bccfd19 ]

Syzkaller managed to hit another decl_tag issue:

  btf_func_proto_check kernel/bpf/btf.c:4506 [inline]
  btf_check_all_types kernel/bpf/btf.c:4734 [inline]
  btf_parse_type_sec+0x1175/0x1980 kernel/bpf/btf.c:4763
  btf_parse kernel/bpf/btf.c:5042 [inline]
  btf_new_fd+0x65a/0xb00 kernel/bpf/btf.c:6709
  bpf_btf_load+0x6f/0x90 kernel/bpf/syscall.c:4342
  __sys_bpf+0x50a/0x6c0 kernel/bpf/syscall.c:5034
  __do_sys_bpf kernel/bpf/syscall.c:5093 [inline]
  __se_sys_bpf kernel/bpf/syscall.c:5091 [inline]
  __x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5091
  do_syscall_64+0x54/0x70 arch/x86/entry/common.c:48

This seems similar to commit ea68376c8bed ("bpf: prevent decl_tag from being
referenced in func_proto") but for the argument.

Reported-by: syzbot+8dd0551dda6020944c5d@syzkaller.appspotmail.com
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20221123035422.872531-2-sdf@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/btf.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/kernel/bpf/btf.c b/kernel/bpf/btf.c
index 0d23d4bcd81c..44e93c3abebd 100644
--- a/kernel/bpf/btf.c
+++ b/kernel/bpf/btf.c
@@ -4481,6 +4481,11 @@ static int btf_func_proto_check(struct btf_verifier_env *env,
 			break;
 		}
 
+		if (btf_type_is_resolve_source_only(arg_type)) {
+			btf_verifier_log_type(env, t, "Invalid arg#%u", i + 1);
+			return -EINVAL;
+		}
+
 		if (args[i].name_off &&
 		    (!btf_name_offset_valid(btf, args[i].name_off) ||
 		     !btf_name_valid_identifier(btf, args[i].name_off))) {
-- 
2.35.1

[PATCH AUTOSEL 6.0 49/73] ethtool: avoiding integer overflow in ethtool_phys_id()

[Sasha Levin]

From: Maxim Korotkov <korotkov.maxim.s@gmail.com>

[ Upstream commit 64a8f8f7127da228d59a39e2c5e75f86590f90b4 ]

The value of an arithmetic expression "n * id.data" is subject
to possible overflow due to a failure to cast operands to a larger data
type before performing arithmetic. Used macro for multiplication instead
operator for avoiding overflow.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Maxim Korotkov <korotkov.maxim.s@gmail.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221122122901.22294-1-korotkov.maxim.s@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ethtool/ioctl.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/ethtool/ioctl.c b/net/ethtool/ioctl.c
index 6a7308de192d..6b59e7a1c906 100644
--- a/net/ethtool/ioctl.c
+++ b/net/ethtool/ioctl.c
@@ -2007,7 +2007,8 @@ static int ethtool_phys_id(struct net_device *dev, void __user *useraddr)
 	} else {
 		/* Driver expects to be called at twice the frequency in rc */
 		int n = rc * 2, interval = HZ / n;
-		u64 count = n * id.data, i = 0;
+		u64 count = mul_u32_u32(n, id.data);
+		u64 i = 0;
 
 		do {
 			rtnl_lock();
-- 
2.35.1

[PATCH AUTOSEL 6.0 50/73] media: dvb-frontends: fix leak of memory fw

[Sasha Levin]

From: Yan Lei <yan_lei@dahuatech.com>

[ Upstream commit a15fe8d9f1bf460a804bcf18a890bfd2cf0d5caa ]

Link: https://lore.kernel.org/linux-media/20220410061925.4107-1-chinayanlei2002@163.com
Signed-off-by: Yan Lei <yan_lei@dahuatech.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-frontends/bcm3510.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/dvb-frontends/bcm3510.c b/drivers/media/dvb-frontends/bcm3510.c
index da0ff7b44da4..68b92b4419cf 100644
--- a/drivers/media/dvb-frontends/bcm3510.c
+++ b/drivers/media/dvb-frontends/bcm3510.c
@@ -649,6 +649,7 @@ static int bcm3510_download_firmware(struct dvb_frontend* fe)
 		deb_info("firmware chunk, addr: 0x%04x, len: 0x%04x, total length: 0x%04zx\n",addr,len,fw->size);
 		if ((ret = bcm3510_write_ram(st,addr,&b[i+4],len)) < 0) {
 			err("firmware download failed: %d\n",ret);
+			release_firmware(fw);
 			return ret;
 		}
 		i += 4 + len;
-- 
2.35.1

[PATCH AUTOSEL 6.0 51/73] media: dvbdev: adopts refcnt to avoid UAF

[Sasha Levin]

From: Lin Ma <linma@zju.edu.cn>

[ Upstream commit 0fc044b2b5e2d05a1fa1fb0d7f270367a7855d79 ]

dvb_unregister_device() is known that prone to use-after-free.
That is, the cleanup from dvb_unregister_device() releases the dvb_device
even if there are pointers stored in file->private_data still refer to it.

This patch adds a reference counter into struct dvb_device and delays its
deallocation until no pointer refers to the object.

Link: https://lore.kernel.org/linux-media/20220807145952.10368-1-linma@zju.edu.cn
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-core/dvb_ca_en50221.c |  2 +-
 drivers/media/dvb-core/dvb_frontend.c   |  2 +-
 drivers/media/dvb-core/dvbdev.c         | 32 +++++++++++++++++++------
 include/media/dvbdev.h                  | 31 +++++++++++++-----------
 4 files changed, 44 insertions(+), 23 deletions(-)

diff --git a/drivers/media/dvb-core/dvb_ca_en50221.c b/drivers/media/dvb-core/dvb_ca_en50221.c
index 15a08d8c69ef..c2d2792227f8 100644
--- a/drivers/media/dvb-core/dvb_ca_en50221.c
+++ b/drivers/media/dvb-core/dvb_ca_en50221.c
@@ -157,7 +157,7 @@ static void dvb_ca_private_free(struct dvb_ca_private *ca)
 {
 	unsigned int i;
 
-	dvb_free_device(ca->dvbdev);
+	dvb_device_put(ca->dvbdev);
 	for (i = 0; i < ca->slot_count; i++)
 		vfree(ca->slot_info[i].rx_buffer.data);
 
diff --git a/drivers/media/dvb-core/dvb_frontend.c b/drivers/media/dvb-core/dvb_frontend.c
index 48e735cdbe6b..c376cd954e5e 100644
--- a/drivers/media/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb-core/dvb_frontend.c
@@ -136,7 +136,7 @@ static void __dvb_frontend_free(struct dvb_frontend *fe)
 	struct dvb_frontend_private *fepriv = fe->frontend_priv;
 
 	if (fepriv)
-		dvb_free_device(fepriv->dvbdev);
+		dvb_device_put(fepriv->dvbdev);
 
 	dvb_frontend_invoke_release(fe, fe->ops.release);
 
diff --git a/drivers/media/dvb-core/dvbdev.c b/drivers/media/dvb-core/dvbdev.c
index 675d877a67b2..14f0e140d541 100644
--- a/drivers/media/dvb-core/dvbdev.c
+++ b/drivers/media/dvb-core/dvbdev.c
@@ -97,7 +97,7 @@ static int dvb_device_open(struct inode *inode, struct file *file)
 		new_fops = fops_get(dvbdev->fops);
 		if (!new_fops)
 			goto fail;
-		file->private_data = dvbdev;
+		file->private_data = dvb_device_get(dvbdev);
 		replace_fops(file, new_fops);
 		if (file->f_op->open)
 			err = file->f_op->open(inode, file);
@@ -161,6 +161,9 @@ int dvb_generic_release(struct inode *inode, struct file *file)
 	}
 
 	dvbdev->users++;
+
+	dvb_device_put(dvbdev);
+
 	return 0;
 }
 EXPORT_SYMBOL(dvb_generic_release);
@@ -477,6 +480,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 		return -ENOMEM;
 	}
 
+	kref_init(&dvbdev->ref);
 	memcpy(dvbdev, template, sizeof(struct dvb_device));
 	dvbdev->type = type;
 	dvbdev->id = id;
@@ -508,7 +512,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 #endif
 
 	dvbdev->minor = minor;
-	dvb_minors[minor] = dvbdev;
+	dvb_minors[minor] = dvb_device_get(dvbdev);
 	up_write(&minor_rwsem);
 
 	ret = dvb_register_media_device(dvbdev, type, minor, demux_sink_pads);
@@ -553,6 +557,7 @@ void dvb_remove_device(struct dvb_device *dvbdev)
 
 	down_write(&minor_rwsem);
 	dvb_minors[dvbdev->minor] = NULL;
+	dvb_device_put(dvbdev);
 	up_write(&minor_rwsem);
 
 	dvb_media_device_free(dvbdev);
@@ -564,21 +569,34 @@ void dvb_remove_device(struct dvb_device *dvbdev)
 EXPORT_SYMBOL(dvb_remove_device);
 
 
-void dvb_free_device(struct dvb_device *dvbdev)
+static void dvb_free_device(struct kref *ref)
 {
-	if (!dvbdev)
-		return;
+	struct dvb_device *dvbdev = container_of(ref, struct dvb_device, ref);
 
 	kfree (dvbdev->fops);
 	kfree (dvbdev);
 }
-EXPORT_SYMBOL(dvb_free_device);
+
+
+struct dvb_device *dvb_device_get(struct dvb_device *dvbdev)
+{
+	kref_get(&dvbdev->ref);
+	return dvbdev;
+}
+EXPORT_SYMBOL(dvb_device_get);
+
+
+void dvb_device_put(struct dvb_device *dvbdev)
+{
+	if (dvbdev)
+		kref_put(&dvbdev->ref, dvb_free_device);
+}
 
 
 void dvb_unregister_device(struct dvb_device *dvbdev)
 {
 	dvb_remove_device(dvbdev);
-	dvb_free_device(dvbdev);
+	dvb_device_put(dvbdev);
 }
 EXPORT_SYMBOL(dvb_unregister_device);
 
diff --git a/include/media/dvbdev.h b/include/media/dvbdev.h
index 2f6b0861322a..149b3d33c24b 100644
--- a/include/media/dvbdev.h
+++ b/include/media/dvbdev.h
@@ -156,6 +156,7 @@ struct dvb_adapter {
  */
 struct dvb_device {
 	struct list_head list_head;
+	struct kref ref;
 	const struct file_operations *fops;
 	struct dvb_adapter *adapter;
 	enum dvb_device_type type;
@@ -187,6 +188,20 @@ struct dvb_device {
 	void *priv;
 };
 
+/**
+ * dvb_device_get - Increase dvb_device reference
+ *
+ * @dvbdev:	pointer to struct dvb_device
+ */
+struct dvb_device *dvb_device_get(struct dvb_device *dvbdev);
+
+/**
+ * dvb_device_get - Decrease dvb_device reference
+ *
+ * @dvbdev:	pointer to struct dvb_device
+ */
+void dvb_device_put(struct dvb_device *dvbdev);
+
 /**
  * dvb_register_adapter - Registers a new DVB adapter
  *
@@ -231,29 +246,17 @@ int dvb_register_device(struct dvb_adapter *adap,
 /**
  * dvb_remove_device - Remove a registered DVB device
  *
- * This does not free memory.  To do that, call dvb_free_device().
+ * This does not free memory. dvb_free_device() will do that when
+ * reference counter is empty
  *
  * @dvbdev:	pointer to struct dvb_device
  */
 void dvb_remove_device(struct dvb_device *dvbdev);
 
-/**
- * dvb_free_device - Free memory occupied by a DVB device.
- *
- * Call dvb_unregister_device() before calling this function.
- *
- * @dvbdev:	pointer to struct dvb_device
- */
-void dvb_free_device(struct dvb_device *dvbdev);
 
 /**
  * dvb_unregister_device - Unregisters a DVB device
  *
- * This is a combination of dvb_remove_device() and dvb_free_device().
- * Using this function is usually a mistake, and is often an indicator
- * for a use-after-free bug (when a userspace process keeps a file
- * handle to a detached device).
- *
  * @dvbdev:	pointer to struct dvb_device
  */
 void dvb_unregister_device(struct dvb_device *dvbdev);
-- 
2.35.1

[PATCH AUTOSEL 6.0 52/73] media: dvb-usb: fix memory leak in dvb_usb_adapter_init()

[Sasha Levin]

From: Mazin Al Haddad <mazinalhaddad05@gmail.com>

[ Upstream commit 94d90fb06b94a90c176270d38861bcba34ce377d ]

Syzbot reports a memory leak in "dvb_usb_adapter_init()".
The leak is due to not accounting for and freeing current iteration's
adapter->priv in case of an error. Currently if an error occurs,
it will exit before incrementing "num_adapters_initalized",
which is used as a reference counter to free all adap->priv
in "dvb_usb_adapter_exit()". There are multiple error paths that
can exit from before incrementing the counter. Including the
error handling paths for "dvb_usb_adapter_stream_init()",
"dvb_usb_adapter_dvb_init()" and "dvb_usb_adapter_frontend_init()"
within "dvb_usb_adapter_init()".

This means that in case of an error in any of these functions the
current iteration is not accounted for and the current iteration's
adap->priv is not freed.

Fix this by freeing the current iteration's adap->priv in the
"stream_init_err:" label in the error path. The rest of the
(accounted for) adap->priv objects are freed in dvb_usb_adapter_exit()
as expected using the num_adapters_initalized variable.

Syzbot report:

BUG: memory leak
unreferenced object 0xffff8881172f1a00 (size 512):
  comm "kworker/0:2", pid 139, jiffies 4294994873 (age 10.960s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
backtrace:
    [<ffffffff844af012>] dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:75 [inline]
    [<ffffffff844af012>] dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:184 [inline]
    [<ffffffff844af012>] dvb_usb_device_init.cold+0x4e5/0x79e drivers/media/usb/dvb-usb/dvb-usb-init.c:308
    [<ffffffff830db21d>] dib0700_probe+0x8d/0x1b0 drivers/media/usb/dvb-usb/dib0700_core.c:883
    [<ffffffff82d3fdc7>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
    [<ffffffff8274ab37>] call_driver_probe drivers/base/dd.c:542 [inline]
    [<ffffffff8274ab37>] really_probe.part.0+0xe7/0x310 drivers/base/dd.c:621
    [<ffffffff8274ae6c>] really_probe drivers/base/dd.c:583 [inline]
    [<ffffffff8274ae6c>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:752
    [<ffffffff8274af6a>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:782
    [<ffffffff8274b786>] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:899
    [<ffffffff82747c87>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427
    [<ffffffff8274b352>] __device_attach+0x122/0x260 drivers/base/dd.c:970
    [<ffffffff827498f6>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:487
    [<ffffffff82745cdb>] device_add+0x5fb/0xdf0 drivers/base/core.c:3405
    [<ffffffff82d3d202>] usb_set_configuration+0x8f2/0xb80 drivers/usb/core/message.c:2170
    [<ffffffff82d4dbfc>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238
    [<ffffffff82d3f49c>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293
    [<ffffffff8274ab37>] call_driver_probe drivers/base/dd.c:542 [inline]
    [<ffffffff8274ab37>] really_probe.part.0+0xe7/0x310 drivers/base/dd.c:621
    [<ffffffff8274ae6c>] really_probe drivers/base/dd.c:583 [inline]
    [<ffffffff8274ae6c>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:752

Link: https://syzkaller.appspot.com/bug?extid=f66dd31987e6740657be
Reported-and-tested-by: syzbot+f66dd31987e6740657be@syzkaller.appspotmail.com

Link: https://lore.kernel.org/linux-media/20220824012152.539788-1-mazinalhaddad05@gmail.com
Signed-off-by: Mazin Al Haddad <mazinalhaddad05@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/dvb-usb/dvb-usb-init.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/usb/dvb-usb/dvb-usb-init.c b/drivers/media/usb/dvb-usb/dvb-usb-init.c
index 61439c8f33ca..58eea8ab5477 100644
--- a/drivers/media/usb/dvb-usb/dvb-usb-init.c
+++ b/drivers/media/usb/dvb-usb/dvb-usb-init.c
@@ -81,7 +81,7 @@ static int dvb_usb_adapter_init(struct dvb_usb_device *d, short *adapter_nrs)
 
 		ret = dvb_usb_adapter_stream_init(adap);
 		if (ret)
-			return ret;
+			goto stream_init_err;
 
 		ret = dvb_usb_adapter_dvb_init(adap, adapter_nrs);
 		if (ret)
@@ -114,6 +114,8 @@ static int dvb_usb_adapter_init(struct dvb_usb_device *d, short *adapter_nrs)
 	dvb_usb_adapter_dvb_exit(adap);
 dvb_init_err:
 	dvb_usb_adapter_stream_exit(adap);
+stream_init_err:
+	kfree(adap->priv);
 	return ret;
 }
 
-- 
2.35.1

[PATCH AUTOSEL 6.0 53/73] media: mediatek: vcodec: Can't set dst buffer to done when lat decode error

[Sasha Levin]

From: Yunfei Dong <yunfei.dong@mediatek.com>

[ Upstream commit 3568ecd3f3a6d133ab7feffbba34955c8c79bbc4 ]

Core thread will call v4l2_m2m_buf_done to set dst buffer done for
lat architecture. If lat call v4l2_m2m_buf_done_and_job_finish to
free dst buffer when lat decode error, core thread will access kernel
NULL pointer dereference, then crash.

Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../media/platform/mediatek/vcodec/mtk_vcodec_dec_stateless.c   | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec_stateless.c b/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec_stateless.c
index c45bd2599bb2..f41a3ff17b04 100644
--- a/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec_stateless.c
+++ b/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec_stateless.c
@@ -250,7 +250,7 @@ static void mtk_vdec_worker(struct work_struct *work)
 
 	state = ret ? VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE;
 	if (!IS_VDEC_LAT_ARCH(dev->vdec_pdata->hw_arch) ||
-	    ctx->current_codec == V4L2_PIX_FMT_VP8_FRAME || ret) {
+	    ctx->current_codec == V4L2_PIX_FMT_VP8_FRAME) {
 		v4l2_m2m_buf_done_and_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx, state);
 		if (src_buf_req)
 			v4l2_ctrl_request_complete(src_buf_req, &ctx->ctrl_hdl);
-- 
2.35.1

[PATCH AUTOSEL 6.0 54/73] blk-mq: fix possible memleak when register 'hctx' failed

[Sasha Levin]

From: Ye Bin <yebin10@huawei.com>

[ Upstream commit 4b7a21c57b14fbcd0e1729150189e5933f5088e9 ]

There's issue as follows when do fault injection test:
unreferenced object 0xffff888132a9f400 (size 512):
  comm "insmod", pid 308021, jiffies 4324277909 (age 509.733s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 08 f4 a9 32 81 88 ff ff  ...........2....
    08 f4 a9 32 81 88 ff ff 00 00 00 00 00 00 00 00  ...2............
  backtrace:
    [<00000000e8952bb4>] kmalloc_node_trace+0x22/0xa0
    [<00000000f9980e0f>] blk_mq_alloc_and_init_hctx+0x3f1/0x7e0
    [<000000002e719efa>] blk_mq_realloc_hw_ctxs+0x1e6/0x230
    [<000000004f1fda40>] blk_mq_init_allocated_queue+0x27e/0x910
    [<00000000287123ec>] __blk_mq_alloc_disk+0x67/0xf0
    [<00000000a2a34657>] 0xffffffffa2ad310f
    [<00000000b173f718>] 0xffffffffa2af824a
    [<0000000095a1dabb>] do_one_initcall+0x87/0x2a0
    [<00000000f32fdf93>] do_init_module+0xdf/0x320
    [<00000000cbe8541e>] load_module+0x3006/0x3390
    [<0000000069ed1bdb>] __do_sys_finit_module+0x113/0x1b0
    [<00000000a1a29ae8>] do_syscall_64+0x35/0x80
    [<000000009cd878b0>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

Fault injection context as follows:
 kobject_add
 blk_mq_register_hctx
 blk_mq_sysfs_register
 blk_register_queue
 device_add_disk
 null_add_dev.part.0 [null_blk]

As 'blk_mq_register_hctx' may already add some objects when failed halfway,
but there isn't do fallback, caller don't know which objects add failed.
To solve above issue just do fallback when add objects failed halfway in
'blk_mq_register_hctx'.

Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20221117022940.873959-1-yebin@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-mq-sysfs.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/block/blk-mq-sysfs.c b/block/blk-mq-sysfs.c
index 93997d297d42..4515288fbe35 100644
--- a/block/blk-mq-sysfs.c
+++ b/block/blk-mq-sysfs.c
@@ -185,7 +185,7 @@ static int blk_mq_register_hctx(struct blk_mq_hw_ctx *hctx)
 {
 	struct request_queue *q = hctx->queue;
 	struct blk_mq_ctx *ctx;
-	int i, ret;
+	int i, j, ret;
 
 	if (!hctx->nr_ctx)
 		return 0;
@@ -197,9 +197,16 @@ static int blk_mq_register_hctx(struct blk_mq_hw_ctx *hctx)
 	hctx_for_each_ctx(hctx, ctx, i) {
 		ret = kobject_add(&ctx->kobj, &hctx->kobj, "cpu%u", ctx->cpu);
 		if (ret)
-			break;
+			goto out;
 	}
 
+	return 0;
+out:
+	hctx_for_each_ctx(hctx, ctx, j) {
+		if (j < i)
+			kobject_del(&ctx->kobj);
+	}
+	kobject_del(&hctx->kobj);
 	return ret;
 }
 
-- 
2.35.1

[PATCH AUTOSEL 6.0 55/73] drm/amd/display: Use the largest vready_offset in pipe group

[Sasha Levin]

From: Wesley Chalmers <Wesley.Chalmers@amd.com>

[ Upstream commit 5842abd985b792a3b13a89b6dae4869b56656c92 ]

[WHY]
Corruption can occur in LB if vready_offset is not large enough.
DML calculates vready_offset for each pipe, but we currently select the
top pipe's vready_offset, which is not necessarily enough for all pipes
in the group.

[HOW]
Wherever program_global_sync is currently called, iterate through the
entire pipe group and find the highest vready_offset.

Reviewed-by: Dillon Varone <Dillon.Varone@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../amd/display/dc/dcn10/dcn10_hw_sequencer.c | 30 +++++++++++++++++--
 .../drm/amd/display/dc/dcn20/dcn20_hwseq.c    | 29 ++++++++++++++++--
 2 files changed, 55 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
index bc9b92838ea9..d7757e7900ba 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
@@ -867,6 +867,32 @@ static void false_optc_underflow_wa(
 		tg->funcs->clear_optc_underflow(tg);
 }
 
+static int calculate_vready_offset_for_group(struct pipe_ctx *pipe)
+{
+	struct pipe_ctx *other_pipe;
+	int vready_offset = pipe->pipe_dlg_param.vready_offset;
+
+	/* Always use the largest vready_offset of all connected pipes */
+	for (other_pipe = pipe->bottom_pipe; other_pipe != NULL; other_pipe = other_pipe->bottom_pipe) {
+		if (other_pipe->pipe_dlg_param.vready_offset > vready_offset)
+			vready_offset = other_pipe->pipe_dlg_param.vready_offset;
+	}
+	for (other_pipe = pipe->top_pipe; other_pipe != NULL; other_pipe = other_pipe->top_pipe) {
+		if (other_pipe->pipe_dlg_param.vready_offset > vready_offset)
+			vready_offset = other_pipe->pipe_dlg_param.vready_offset;
+	}
+	for (other_pipe = pipe->next_odm_pipe; other_pipe != NULL; other_pipe = other_pipe->next_odm_pipe) {
+		if (other_pipe->pipe_dlg_param.vready_offset > vready_offset)
+			vready_offset = other_pipe->pipe_dlg_param.vready_offset;
+	}
+	for (other_pipe = pipe->prev_odm_pipe; other_pipe != NULL; other_pipe = other_pipe->prev_odm_pipe) {
+		if (other_pipe->pipe_dlg_param.vready_offset > vready_offset)
+			vready_offset = other_pipe->pipe_dlg_param.vready_offset;
+	}
+
+	return vready_offset;
+}
+
 enum dc_status dcn10_enable_stream_timing(
 		struct pipe_ctx *pipe_ctx,
 		struct dc_state *context,
@@ -902,7 +928,7 @@ enum dc_status dcn10_enable_stream_timing(
 	pipe_ctx->stream_res.tg->funcs->program_timing(
 			pipe_ctx->stream_res.tg,
 			&stream->timing,
-			pipe_ctx->pipe_dlg_param.vready_offset,
+			calculate_vready_offset_for_group(pipe_ctx),
 			pipe_ctx->pipe_dlg_param.vstartup_start,
 			pipe_ctx->pipe_dlg_param.vupdate_offset,
 			pipe_ctx->pipe_dlg_param.vupdate_width,
@@ -2869,7 +2895,7 @@ void dcn10_program_pipe(
 
 		pipe_ctx->stream_res.tg->funcs->program_global_sync(
 				pipe_ctx->stream_res.tg,
-				pipe_ctx->pipe_dlg_param.vready_offset,
+				calculate_vready_offset_for_group(pipe_ctx),
 				pipe_ctx->pipe_dlg_param.vstartup_start,
 				pipe_ctx->pipe_dlg_param.vupdate_offset,
 				pipe_ctx->pipe_dlg_param.vupdate_width);
diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
index 0f30df523fdf..43def9f8d9d1 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
@@ -1608,6 +1608,31 @@ static void dcn20_update_dchubp_dpp(
 		hubp->funcs->phantom_hubp_post_enable(hubp);
 }
 
+static int calculate_vready_offset_for_group(struct pipe_ctx *pipe)
+{
+	struct pipe_ctx *other_pipe;
+	int vready_offset = pipe->pipe_dlg_param.vready_offset;
+
+	/* Always use the largest vready_offset of all connected pipes */
+	for (other_pipe = pipe->bottom_pipe; other_pipe != NULL; other_pipe = other_pipe->bottom_pipe) {
+		if (other_pipe->pipe_dlg_param.vready_offset > vready_offset)
+			vready_offset = other_pipe->pipe_dlg_param.vready_offset;
+	}
+	for (other_pipe = pipe->top_pipe; other_pipe != NULL; other_pipe = other_pipe->top_pipe) {
+		if (other_pipe->pipe_dlg_param.vready_offset > vready_offset)
+			vready_offset = other_pipe->pipe_dlg_param.vready_offset;
+	}
+	for (other_pipe = pipe->next_odm_pipe; other_pipe != NULL; other_pipe = other_pipe->next_odm_pipe) {
+		if (other_pipe->pipe_dlg_param.vready_offset > vready_offset)
+			vready_offset = other_pipe->pipe_dlg_param.vready_offset;
+	}
+	for (other_pipe = pipe->prev_odm_pipe; other_pipe != NULL; other_pipe = other_pipe->prev_odm_pipe) {
+		if (other_pipe->pipe_dlg_param.vready_offset > vready_offset)
+			vready_offset = other_pipe->pipe_dlg_param.vready_offset;
+	}
+
+	return vready_offset;
+}
 
 static void dcn20_program_pipe(
 		struct dc *dc,
@@ -1626,7 +1651,7 @@ static void dcn20_program_pipe(
 			&& !pipe_ctx->prev_odm_pipe) {
 		pipe_ctx->stream_res.tg->funcs->program_global_sync(
 				pipe_ctx->stream_res.tg,
-				pipe_ctx->pipe_dlg_param.vready_offset,
+				calculate_vready_offset_for_group(pipe_ctx),
 				pipe_ctx->pipe_dlg_param.vstartup_start,
 				pipe_ctx->pipe_dlg_param.vupdate_offset,
 				pipe_ctx->pipe_dlg_param.vupdate_width);
@@ -2040,7 +2065,7 @@ bool dcn20_update_bandwidth(
 
 			pipe_ctx->stream_res.tg->funcs->program_global_sync(
 					pipe_ctx->stream_res.tg,
-					pipe_ctx->pipe_dlg_param.vready_offset,
+					calculate_vready_offset_for_group(pipe_ctx),
 					pipe_ctx->pipe_dlg_param.vstartup_start,
 					pipe_ctx->pipe_dlg_param.vupdate_offset,
 					pipe_ctx->pipe_dlg_param.vupdate_width);
-- 
2.35.1

[PATCH AUTOSEL 6.0 56/73] drm/amd/display: Fix DTBCLK disable requests and SRC_SEL programming

[Sasha Levin]

From: Alvin Lee <Alvin.Lee2@amd.com>

[ Upstream commit f6015da7f2410109bd2ccd2e2828f26185aeb81d ]

[Description]
- When transitioning FRL / DP2 is not required, we will always request
  DTBCLK = 0Mhz, but PMFW returns the min freq
- This causes us to make DTBCLK requests every time we call optimize
  after transitioning from FRL to non-FRL
- If DTBCLK is not required, request the min instead (then we only need
  to make 1 extra request at boot time)
- Also when programming PIPE_DTO_SRC_SEL, don't programming for DP
  first, just programming once for the required selection (programming
  DP on an HDMI connection then switching back causes corruption)

Reviewed-by: Dillon Varone <Dillon.Varone@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c    | 2 +-
 drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dccg.c           | 6 +-----
 2 files changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c
index e7f1d5f8166f..59a29c32f66a 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c
@@ -436,7 +436,7 @@ static void dcn32_update_clocks(struct clk_mgr *clk_mgr_base,
 	}
 
 	if (!new_clocks->dtbclk_en) {
-		new_clocks->ref_dtbclk_khz = 0;
+		new_clocks->ref_dtbclk_khz = clk_mgr_base->bw_params->clk_table.entries[0].dtbclk_mhz * 1000;
 	}
 
 	/* clock limits are received with MHz precision, divide by 1000 to prevent setting clocks at every call */
diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dccg.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dccg.c
index 6dd8dadd68a5..6f160f65c8fa 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dccg.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dccg.c
@@ -225,11 +225,7 @@ void dccg32_set_dtbclk_dto(
 	} else {
 		REG_UPDATE_2(OTG_PIXEL_RATE_CNTL[params->otg_inst],
 				DTBCLK_DTO_ENABLE[params->otg_inst], 0,
-				PIPE_DTO_SRC_SEL[params->otg_inst], 1);
-		if (params->is_hdmi)
-			REG_UPDATE(OTG_PIXEL_RATE_CNTL[params->otg_inst],
-				PIPE_DTO_SRC_SEL[params->otg_inst], 0);
-
+				PIPE_DTO_SRC_SEL[params->otg_inst], params->is_hdmi ? 0 : 1);
 		REG_WRITE(DTBCLK_DTO_MODULO[params->otg_inst], 0);
 		REG_WRITE(DTBCLK_DTO_PHASE[params->otg_inst], 0);
 	}
-- 
2.35.1

[PATCH AUTOSEL 6.0 57/73] ASoC: amd: yc: Add Xiaomi Redmi Book Pro 14 2022 into DMI table

[Sasha Levin]

From: Artem Lukyanov <dukzcry@ya.ru>

[ Upstream commit c1dd6bf6199752890d8c59d895dd45094da51d1f ]

This model requires an additional detection quirk to enable the
internal microphone - BIOS doesn't seem to support AcpDmicConnected
(nothing in acpidump output).

Signed-off-by: Artem Lukyanov <dukzcry@ya.ru>
Link: https://lore.kernel.org/r/20221130085247.85126-1-dukzcry@ya.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/amd/yc/acp6x-mach.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c
index d9715bea965e..1f0b5527c594 100644
--- a/sound/soc/amd/yc/acp6x-mach.c
+++ b/sound/soc/amd/yc/acp6x-mach.c
@@ -213,6 +213,13 @@ static const struct dmi_system_id yc_acp_quirk_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m17 R5 AMD"),
 		}
 	},
+	{
+		.driver_data = &acp6x_card,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "TIMI"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Redmi Book Pro 14 2022"),
+		}
+	},
 	{}
 };
 
-- 
2.35.1

[PATCH AUTOSEL 6.0 58/73] libbpf: Avoid enum forward-declarations in public API in C++ mode

[Sasha Levin]

From: Andrii Nakryiko <andrii@kernel.org>

[ Upstream commit b42693415b86f608049cf1b4870adc1dc65e58b0 ]

C++ enum forward declarations are fundamentally not compatible with pure
C enum definitions, and so libbpf's use of `enum bpf_stats_type;`
forward declaration in libbpf/bpf.h public API header is causing C++
compilation issues.

More details can be found in [0], but it comes down to C++ supporting
enum forward declaration only with explicitly specified backing type:

  enum bpf_stats_type: int;

In C (and I believe it's a GCC extension also), such forward declaration
is simply:

  enum bpf_stats_type;

Further, in Linux UAPI this enum is defined in pure C way:

enum bpf_stats_type { BPF_STATS_RUN_TIME = 0; }

And even though in both cases backing type is int, which can be
confirmed by looking at DWARF information, for C++ compiler actual enum
definition and forward declaration are incompatible.

To eliminate this problem, for C++ mode define input argument as int,
which makes enum unnecessary in libbpf public header. This solves the
issue and as demonstrated by next patch doesn't cause any unwanted
compiler warnings, at least with default warnings setting.

  [0] https://stackoverflow.com/questions/42766839/c11-enum-forward-causes-underlying-type-mismatch
  [1] Closes: https://github.com/libbpf/libbpf/issues/249

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221130200013.2997831-1-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/bpf.h | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/tools/lib/bpf/bpf.h b/tools/lib/bpf/bpf.h
index 9c50beabdd14..fddc05c667b5 100644
--- a/tools/lib/bpf/bpf.h
+++ b/tools/lib/bpf/bpf.h
@@ -393,8 +393,15 @@ LIBBPF_API int bpf_task_fd_query(int pid, int fd, __u32 flags, char *buf,
 				 __u32 *buf_len, __u32 *prog_id, __u32 *fd_type,
 				 __u64 *probe_offset, __u64 *probe_addr);
 
+#ifdef __cplusplus
+/* forward-declaring enums in C++ isn't compatible with pure C enums, so
+ * instead define bpf_enable_stats() as accepting int as an input
+ */
+LIBBPF_API int bpf_enable_stats(int type);
+#else
 enum bpf_stats_type; /* defined in up-to-date linux/bpf.h */
 LIBBPF_API int bpf_enable_stats(enum bpf_stats_type type);
+#endif
 
 struct bpf_prog_bind_opts {
 	size_t sz; /* size of this struct for forward/backward compatibility */
-- 
2.35.1

[PATCH AUTOSEL 6.0 59/73] regulator: core: fix use_count leakage when handling boot-on

[Sasha Levin]

From: Rui Zhang <zr.zhang@vivo.com>

[ Upstream commit 0591b14ce0398125439c759f889647369aa616a0 ]

I found a use_count leakage towards supply regulator of rdev with
boot-on option.

┌───────────────────┐           ┌───────────────────┐
│  regulator_dev A  │           │  regulator_dev B  │
│     (boot-on)     │           │     (boot-on)     │
│    use_count=0    │◀──supply──│    use_count=1    │
│                   │           │                   │
└───────────────────┘           └───────────────────┘

In case of rdev(A) configured with `regulator-boot-on', the use_count
of supplying regulator(B) will increment inside
regulator_enable(rdev->supply).

Thus, B will acts like always-on, and further balanced
regulator_enable/disable cannot actually disable it anymore.

However, B was also configured with `regulator-boot-on', we wish it
could be disabled afterwards.

Signed-off-by: Rui Zhang <zr.zhang@vivo.com>
Link: https://lore.kernel.org/r/20221201033806.2567812-1-zr.zhang@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/core.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index c0f368f1b49f..02ea917c7fd1 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1578,7 +1578,13 @@ static int set_machine_constraints(struct regulator_dev *rdev)
 		if (rdev->supply_name && !rdev->supply)
 			return -EPROBE_DEFER;
 
-		if (rdev->supply) {
+		/* If supplying regulator has already been enabled,
+		 * it's not intended to have use_count increment
+		 * when rdev is only boot-on.
+		 */
+		if (rdev->supply &&
+		    (rdev->constraints->always_on ||
+		     !regulator_is_enabled(rdev->supply))) {
 			ret = regulator_enable(rdev->supply);
 			if (ret < 0) {
 				_regulator_put(rdev->supply);
-- 
2.35.1

[PATCH AUTOSEL 6.0 60/73] net: dpaa2: publish MAC stringset to ethtool -S even if MAC is missing

[Sasha Levin]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit 29811d6e19d795efcf26644b66c4152abbac35a6 ]

DPNIs and DPSW objects can connect and disconnect at runtime from DPMAC
objects on the same fsl-mc bus. The DPMAC object also holds "ethtool -S"
unstructured counters. Those counters are only shown for the entity
owning the netdev (DPNI, DPSW) if it's connected to a DPMAC.

The ethtool stringset code path is split into multiple callbacks, but
currently, connecting and disconnecting the DPMAC takes the rtnl_lock().
This blocks the entire ethtool code path from running, see
ethnl_default_doit() -> rtnl_lock() -> ops->prepare_data() ->
strset_prepare_data().

This is going to be a problem if we are going to no longer require
rtnl_lock() when connecting/disconnecting the DPMAC, because the DPMAC
could appear between ops->get_sset_count() and ops->get_strings().
If it appears out of the blue, we will provide a stringset into an array
that was dimensioned thinking the DPMAC wouldn't be there => array
accessed out of bounds.

There isn't really a good way to work around that, and I don't want to
put too much pressure on the ethtool framework by playing locking games.
Just make the DPMAC counters be always available. They'll be zeroes if
the DPNI or DPSW isn't connected to a DPMAC.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c | 12 +++---------
 .../ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c  | 11 ++---------
 2 files changed, 5 insertions(+), 18 deletions(-)

diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
index eea7d7a07c00..8381cbdb9461 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
@@ -186,7 +186,6 @@ static int dpaa2_eth_set_pauseparam(struct net_device *net_dev,
 static void dpaa2_eth_get_strings(struct net_device *netdev, u32 stringset,
 				  u8 *data)
 {
-	struct dpaa2_eth_priv *priv = netdev_priv(netdev);
 	u8 *p = data;
 	int i;
 
@@ -200,22 +199,17 @@ static void dpaa2_eth_get_strings(struct net_device *netdev, u32 stringset,
 			strscpy(p, dpaa2_ethtool_extras[i], ETH_GSTRING_LEN);
 			p += ETH_GSTRING_LEN;
 		}
-		if (dpaa2_eth_has_mac(priv))
-			dpaa2_mac_get_strings(p);
+		dpaa2_mac_get_strings(p);
 		break;
 	}
 }
 
 static int dpaa2_eth_get_sset_count(struct net_device *net_dev, int sset)
 {
-	int num_ss_stats = DPAA2_ETH_NUM_STATS + DPAA2_ETH_NUM_EXTRA_STATS;
-	struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
-
 	switch (sset) {
 	case ETH_SS_STATS: /* ethtool_get_stats(), ethtool_get_drvinfo() */
-		if (dpaa2_eth_has_mac(priv))
-			num_ss_stats += dpaa2_mac_get_sset_count();
-		return num_ss_stats;
+		return DPAA2_ETH_NUM_STATS + DPAA2_ETH_NUM_EXTRA_STATS +
+		       dpaa2_mac_get_sset_count();
 	default:
 		return -EOPNOTSUPP;
 	}
diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c
index 720c9230cab5..40ee57ef55be 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c
@@ -145,14 +145,9 @@ dpaa2_switch_set_link_ksettings(struct net_device *netdev,
 static int
 dpaa2_switch_ethtool_get_sset_count(struct net_device *netdev, int sset)
 {
-	struct ethsw_port_priv *port_priv = netdev_priv(netdev);
-	int num_ss_stats = DPAA2_SWITCH_NUM_COUNTERS;
-
 	switch (sset) {
 	case ETH_SS_STATS:
-		if (port_priv->mac)
-			num_ss_stats += dpaa2_mac_get_sset_count();
-		return num_ss_stats;
+		return DPAA2_SWITCH_NUM_COUNTERS + dpaa2_mac_get_sset_count();
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -161,7 +156,6 @@ dpaa2_switch_ethtool_get_sset_count(struct net_device *netdev, int sset)
 static void dpaa2_switch_ethtool_get_strings(struct net_device *netdev,
 					     u32 stringset, u8 *data)
 {
-	struct ethsw_port_priv *port_priv = netdev_priv(netdev);
 	u8 *p = data;
 	int i;
 
@@ -172,8 +166,7 @@ static void dpaa2_switch_ethtool_get_strings(struct net_device *netdev,
 			       ETH_GSTRING_LEN);
 			p += ETH_GSTRING_LEN;
 		}
-		if (port_priv->mac)
-			dpaa2_mac_get_strings(p);
+		dpaa2_mac_get_strings(p);
 		break;
 	}
 }
-- 
2.35.1

[PATCH AUTOSEL 6.0 61/73] wifi: mt76: do not run mt76u_status_worker if the device is not running

[Sasha Levin]

From: Lorenzo Bianconi <lorenzo@kernel.org>

[ Upstream commit bd5dac7ced5a7c9faa4dc468ac9560c3256df845 ]

Fix the following NULL pointer dereference avoiding to run
mt76u_status_worker thread if the device is not running yet.

KASAN: null-ptr-deref in range
[0x0000000000000000-0x0000000000000007]
CPU: 0 PID: 98 Comm: kworker/u2:2 Not tainted 5.14.0+ #78 Hardware
name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: mt76 mt76u_tx_status_data
RIP: 0010:mt76x02_mac_fill_tx_status.isra.0+0x82c/0x9e0
Code: c5 48 b8 00 00 00 00 00 fc ff df 80 3c 02 00 0f 85 94 01 00 00
48 b8 00 00 00 00 00 fc ff df 4d 8b 34 24 4c 89 f2 48 c1 ea 03 <0f>
b6
04 02 84 c0 74 08 3c 03 0f 8e 89 01 00 00 41 8b 16 41 0f b7
RSP: 0018:ffffc900005af988 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffffc900005afae8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff832fc661 RDI: ffffc900005afc2a
RBP: ffffc900005afae0 R08: 0000000000000001 R09: fffff520000b5f3c
R10: 0000000000000003 R11: fffff520000b5f3b R12: ffff88810b6132d8
R13: 000000000000ffff R14: 0000000000000000 R15: ffffc900005afc28
FS:  0000000000000000(0000) GS:ffff88811aa00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa0eda6a000 CR3: 0000000118f17000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
 mt76x02_send_tx_status+0x1d2/0xeb0
 mt76x02_tx_status_data+0x8e/0xd0
 mt76u_tx_status_data+0xe1/0x240
 process_one_work+0x92b/0x1460
 worker_thread+0x95/0xe00
 kthread+0x3a1/0x480
 ret_from_fork+0x1f/0x30
Modules linked in:
--[ end trace 8df5d20fc5040f65 ]--
RIP: 0010:mt76x02_mac_fill_tx_status.isra.0+0x82c/0x9e0
Code: c5 48 b8 00 00 00 00 00 fc ff df 80 3c 02 00 0f 85 94 01 00 00
48 b8 00 00 00 00 00 fc ff df 4d 8b 34 24 4c 89 f2 48 c1 ea 03 <0f>
b6
04 02 84 c0 74 08 3c 03 0f 8e 89 01 00 00 41 8b 16 41 0f b7
RSP: 0018:ffffc900005af988 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffffc900005afae8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff832fc661 RDI: ffffc900005afc2a
RBP: ffffc900005afae0 R08: 0000000000000001 R09: fffff520000b5f3c
R10: 0000000000000003 R11: fffff520000b5f3b R12: ffff88810b6132d8
R13: 000000000000ffff R14: 0000000000000000 R15: ffffc900005afc28
FS:  0000000000000000(0000) GS:ffff88811aa00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa0eda6a000 CR3: 0000000118f17000 CR4: 0000000000750ef0
PKRU: 55555554

Moreover move stat_work schedule out of the for loop.

Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr>
Co-developed-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/usb.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/usb.c b/drivers/net/wireless/mediatek/mt76/usb.c
index 6b8964c19f50..446429f4d944 100644
--- a/drivers/net/wireless/mediatek/mt76/usb.c
+++ b/drivers/net/wireless/mediatek/mt76/usb.c
@@ -761,6 +761,9 @@ static void mt76u_status_worker(struct mt76_worker *w)
 	struct mt76_queue *q;
 	int i;
 
+	if (!test_bit(MT76_STATE_RUNNING, &dev->phy.state))
+		return;
+
 	for (i = 0; i < IEEE80211_NUM_ACS; i++) {
 		q = dev->phy.q_tx[i];
 		if (!q)
@@ -780,11 +783,11 @@ static void mt76u_status_worker(struct mt76_worker *w)
 			wake_up(&dev->tx_wait);
 
 		mt76_worker_schedule(&dev->tx_worker);
-
-		if (dev->drv->tx_status_data &&
-		    !test_and_set_bit(MT76_READING_STATS, &dev->phy.state))
-			queue_work(dev->wq, &dev->usb.stat_work);
 	}
+
+	if (dev->drv->tx_status_data &&
+	    !test_and_set_bit(MT76_READING_STATS, &dev->phy.state))
+		queue_work(dev->wq, &dev->usb.stat_work);
 }
 
 static void mt76u_tx_status_data(struct work_struct *work)
-- 
2.35.1

[PATCH AUTOSEL 6.0 62/73] hwmon: (nct6775) add ASUS CROSSHAIR VIII/TUF/ProArt B550M

[Sasha Levin]

From: Denis Pauk <pauk.denis@gmail.com>

[ Upstream commit 1864069c695d475e0ce98a335c62274b81be57b4 ]

Boards such as
* ProArt B550-CREATOR
* ProArt Z490-CREATOR 10G
* ROG CROSSHAIR VIII EXTREME
* ROG CROSSHAIR VIII HERO (WI-FI)
* TUF GAMING B550M-E
* TUF GAMING B550M-E (WI-FI)
* TUF GAMING B550M-PLUS WIFI II
have got a nct6775 chip, but by default there's no use of it
because of resource conflict with WMI method.

This commit adds such boards to the WMI monitoring list.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204807
Signed-off-by: Denis Pauk <pauk.denis@gmail.com>
Reported-by: yutesdb <mundanedefoliation@gmail.com>
Tested-by: yutesdb <mundanedefoliation@gmail.com>
Link: https://lore.kernel.org/r/20221114214456.3891-1-pauk.denis@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/nct6775-platform.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/hwmon/nct6775-platform.c b/drivers/hwmon/nct6775-platform.c
index 41c97cfacfb8..50fe9533cf43 100644
--- a/drivers/hwmon/nct6775-platform.c
+++ b/drivers/hwmon/nct6775-platform.c
@@ -1043,7 +1043,9 @@ static struct platform_device *pdev[2];
 
 static const char * const asus_wmi_boards[] = {
 	"PRO H410T",
+	"ProArt B550-CREATOR",
 	"ProArt X570-CREATOR WIFI",
+	"ProArt Z490-CREATOR 10G",
 	"Pro B550M-C",
 	"Pro WS X570-ACE",
 	"PRIME B360-PLUS",
@@ -1055,8 +1057,10 @@ static const char * const asus_wmi_boards[] = {
 	"PRIME X570-P",
 	"PRIME X570-PRO",
 	"ROG CROSSHAIR VIII DARK HERO",
+	"ROG CROSSHAIR VIII EXTREME",
 	"ROG CROSSHAIR VIII FORMULA",
 	"ROG CROSSHAIR VIII HERO",
+	"ROG CROSSHAIR VIII HERO (WI-FI)",
 	"ROG CROSSHAIR VIII IMPACT",
 	"ROG STRIX B550-A GAMING",
 	"ROG STRIX B550-E GAMING",
@@ -1080,8 +1084,11 @@ static const char * const asus_wmi_boards[] = {
 	"ROG STRIX Z490-G GAMING (WI-FI)",
 	"ROG STRIX Z490-H GAMING",
 	"ROG STRIX Z490-I GAMING",
+	"TUF GAMING B550M-E",
+	"TUF GAMING B550M-E (WI-FI)",
 	"TUF GAMING B550M-PLUS",
 	"TUF GAMING B550M-PLUS (WI-FI)",
+	"TUF GAMING B550M-PLUS WIFI II",
 	"TUF GAMING B550-PLUS",
 	"TUF GAMING B550-PLUS WIFI II",
 	"TUF GAMING B550-PRO",
-- 
2.35.1

[PATCH AUTOSEL 6.0 63/73] selftests/bpf: Fix conflicts with built-in functions in bpf_iter_ksym

[Sasha Levin]

From: James Hilliard <james.hilliard1@gmail.com>

[ Upstream commit ab0350c743d5c93fd88742f02b3dff12168ab435 ]

Both tolower and toupper are built in c functions, we should not
redefine them as this can result in a build error.

Fixes the following errors:
progs/bpf_iter_ksym.c:10:20: error: conflicting types for built-in function 'tolower'; expected 'int(int)' [-Werror=builtin-declaration-mismatch]
   10 | static inline char tolower(char c)
      |                    ^~~~~~~
progs/bpf_iter_ksym.c:5:1: note: 'tolower' is declared in header '<ctype.h>'
    4 | #include <bpf/bpf_helpers.h>
  +++ |+#include <ctype.h>
    5 |
progs/bpf_iter_ksym.c:17:20: error: conflicting types for built-in function 'toupper'; expected 'int(int)' [-Werror=builtin-declaration-mismatch]
   17 | static inline char toupper(char c)
      |                    ^~~~~~~
progs/bpf_iter_ksym.c:17:20: note: 'toupper' is declared in header '<ctype.h>'

See background on this sort of issue:
https://stackoverflow.com/a/20582607
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=12213

(C99, 7.1.3p1) "All identifiers with external linkage in any of the
following subclauses (including the future library directions) are
always reserved for use as identifiers with external linkage."

This is documented behavior in GCC:
https://gcc.gnu.org/onlinedocs/gcc/Other-Builtins.html#index-std-2

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221203010847.2191265-1-james.hilliard1@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/progs/bpf_iter_ksym.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/tools/testing/selftests/bpf/progs/bpf_iter_ksym.c b/tools/testing/selftests/bpf/progs/bpf_iter_ksym.c
index 285c008cbf9c..9ba14c37bbcc 100644
--- a/tools/testing/selftests/bpf/progs/bpf_iter_ksym.c
+++ b/tools/testing/selftests/bpf/progs/bpf_iter_ksym.c
@@ -7,14 +7,14 @@ char _license[] SEC("license") = "GPL";
 
 unsigned long last_sym_value = 0;
 
-static inline char tolower(char c)
+static inline char to_lower(char c)
 {
 	if (c >= 'A' && c <= 'Z')
 		c += ('a' - 'A');
 	return c;
 }
 
-static inline char toupper(char c)
+static inline char to_upper(char c)
 {
 	if (c >= 'a' && c <= 'z')
 		c -= ('a' - 'A');
@@ -54,7 +54,7 @@ int dump_ksym(struct bpf_iter__ksym *ctx)
 	type = iter->type;
 
 	if (iter->module_name[0]) {
-		type = iter->exported ? toupper(type) : tolower(type);
+		type = iter->exported ? to_upper(type) : to_lower(type);
 		BPF_SEQ_PRINTF(seq, "0x%llx %c %s [ %s ] ",
 			       value, type, iter->name, iter->module_name);
 	} else {
-- 
2.35.1

[PATCH AUTOSEL 6.0 64/73] nfs: fix possible null-ptr-deref when parsing param

[Sasha Levin]

From: Hawkins Jiawei <yin31149@gmail.com>

[ Upstream commit 5559405df652008e56eee88872126fe4c451da67 ]

According to commit "vfs: parse: deal with zero length string value",
kernel will set the param->string to null pointer in vfs_parse_fs_string()
if fs string has zero length.

Yet the problem is that, nfs_fs_context_parse_param() will dereferences the
param->string, without checking whether it is a null pointer, which may
trigger a null-ptr-deref bug.

This patch solves it by adding sanity check on param->string
in nfs_fs_context_parse_param().

Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/fs_context.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/fs/nfs/fs_context.c b/fs/nfs/fs_context.c
index 4da701fd1424..0c330bc13ef2 100644
--- a/fs/nfs/fs_context.c
+++ b/fs/nfs/fs_context.c
@@ -684,6 +684,8 @@ static int nfs_fs_context_parse_param(struct fs_context *fc,
 			return ret;
 		break;
 	case Opt_vers:
+		if (!param->string)
+			goto out_invalid_value;
 		trace_nfs_mount_assign(param->key, param->string);
 		ret = nfs_parse_version_string(fc, param->string);
 		if (ret < 0)
@@ -696,6 +698,8 @@ static int nfs_fs_context_parse_param(struct fs_context *fc,
 		break;
 
 	case Opt_proto:
+		if (!param->string)
+			goto out_invalid_value;
 		trace_nfs_mount_assign(param->key, param->string);
 		protofamily = AF_INET;
 		switch (lookup_constant(nfs_xprt_protocol_tokens, param->string, -1)) {
@@ -732,6 +736,8 @@ static int nfs_fs_context_parse_param(struct fs_context *fc,
 		break;
 
 	case Opt_mountproto:
+		if (!param->string)
+			goto out_invalid_value;
 		trace_nfs_mount_assign(param->key, param->string);
 		mountfamily = AF_INET;
 		switch (lookup_constant(nfs_xprt_protocol_tokens, param->string, -1)) {
-- 
2.35.1

[PATCH AUTOSEL 6.0 65/73] mmc: f-sdh30: Add quirks for broken timeout clock capability

[Sasha Levin]

From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>

[ Upstream commit aae9d3a440736691b3c1cb09ae2c32c4f1ee2e67 ]

There is a case where the timeout clock is not supplied to the capability.
Add a quirk for that.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Link: https://lore.kernel.org/r/20221111081033.3813-7-hayashi.kunihiko@socionext.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/sdhci_f_sdh30.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mmc/host/sdhci_f_sdh30.c b/drivers/mmc/host/sdhci_f_sdh30.c
index 3f5977979cf2..6c4f43e11282 100644
--- a/drivers/mmc/host/sdhci_f_sdh30.c
+++ b/drivers/mmc/host/sdhci_f_sdh30.c
@@ -168,6 +168,9 @@ static int sdhci_f_sdh30_probe(struct platform_device *pdev)
 	if (reg & SDHCI_CAN_DO_8BIT)
 		priv->vendor_hs200 = F_SDH30_EMMC_HS200;
 
+	if (!(reg & SDHCI_TIMEOUT_CLK_MASK))
+		host->quirks |= SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK;
+
 	ret = sdhci_add_host(host);
 	if (ret)
 		goto err_add_host;
-- 
2.35.1

[PATCH AUTOSEL 6.0 66/73] mmc: renesas_sdhi: add quirk for broken register layout

[Sasha Levin]

From: Wolfram Sang <wsa+renesas@sang-engineering.com>

[ Upstream commit ec9e80ae1719de541c719116a1ca0a0c70e9240c ]

Some early Gen3 SoCs have the DTRANEND1 bit at a different location than
all later SoCs. Because we need the bit soon, add a quirk so we know
which bit to use.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20221006190452.5316-5-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/renesas_sdhi.h               | 1 +
 drivers/mmc/host/renesas_sdhi_internal_dmac.c | 4 +++-
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/renesas_sdhi.h b/drivers/mmc/host/renesas_sdhi.h
index c4abfee1ebae..e4c490729c98 100644
--- a/drivers/mmc/host/renesas_sdhi.h
+++ b/drivers/mmc/host/renesas_sdhi.h
@@ -44,6 +44,7 @@ struct renesas_sdhi_quirks {
 	bool fixed_addr_mode;
 	bool dma_one_rx_only;
 	bool manual_tap_correction;
+	bool old_info1_layout;
 	u32 hs400_bad_taps;
 	const u8 (*hs400_calib_table)[SDHI_CALIB_TABLE_MAX];
 };
diff --git a/drivers/mmc/host/renesas_sdhi_internal_dmac.c b/drivers/mmc/host/renesas_sdhi_internal_dmac.c
index 42937596c4c4..7c81c2680701 100644
--- a/drivers/mmc/host/renesas_sdhi_internal_dmac.c
+++ b/drivers/mmc/host/renesas_sdhi_internal_dmac.c
@@ -49,7 +49,8 @@
 /* DM_CM_INFO1 and DM_CM_INFO1_MASK */
 #define INFO1_CLEAR		0
 #define INFO1_MASK_CLEAR	GENMASK_ULL(31, 0)
-#define INFO1_DTRANEND1		BIT(17)
+#define INFO1_DTRANEND1		BIT(20)
+#define INFO1_DTRANEND1_OLD	BIT(17)
 #define INFO1_DTRANEND0		BIT(16)
 
 /* DM_CM_INFO2 and DM_CM_INFO2_MASK */
@@ -165,6 +166,7 @@ static const struct renesas_sdhi_quirks sdhi_quirks_4tap_nohs400_one_rx = {
 	.hs400_disabled = true,
 	.hs400_4taps = true,
 	.dma_one_rx_only = true,
+	.old_info1_layout = true,
 };
 
 static const struct renesas_sdhi_quirks sdhi_quirks_4tap = {
-- 
2.35.1

[PATCH AUTOSEL 6.0 67/73] mmc: renesas_sdhi: better reset from HS400 mode

[Sasha Levin]

From: Wolfram Sang <wsa+renesas@sang-engineering.com>

[ Upstream commit 0da69dd2155019ed4c444ede0e79ce7a4a6af627 ]

Up to now, HS400 adjustment mode was only disabled on soft reset when a
calibration table was in use. It is safer, though, to disable it as soon
as the instance has an adjustment related quirk set, i.e. bad taps or a
calibration table.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20221120113457.42010-3-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/renesas_sdhi_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c
index b970699743e0..02682c2fd957 100644
--- a/drivers/mmc/host/renesas_sdhi_core.c
+++ b/drivers/mmc/host/renesas_sdhi_core.c
@@ -546,7 +546,7 @@ static void renesas_sdhi_reset_hs400_mode(struct tmio_mmc_host *host,
 			 SH_MOBILE_SDHI_SCC_TMPPORT2_HS400OSEL) &
 			sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_TMPPORT2));
 
-	if (priv->adjust_hs400_calib_table)
+	if (priv->quirks && (priv->quirks->hs400_calib_table || priv->quirks->hs400_bad_taps))
 		renesas_sdhi_adjust_hs400_mode_disable(host);
 
 	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, CLK_CTL_SCLKEN |
-- 
2.35.1

[PATCH AUTOSEL 6.0 68/73] media: si470x: Fix use-after-free in si470x_int_in_callback()

[Sasha Levin]

From: Shigeru Yoshida <syoshida@redhat.com>

[ Upstream commit 7d21e0b1b41b21d628bf2afce777727bd4479aa5 ]

syzbot reported use-after-free in si470x_int_in_callback() [1].  This
indicates that urb->context, which contains struct si470x_device
object, is freed when si470x_int_in_callback() is called.

The cause of this issue is that si470x_int_in_callback() is called for
freed urb.

si470x_usb_driver_probe() calls si470x_start_usb(), which then calls
usb_submit_urb() and si470x_start().  If si470x_start_usb() fails,
si470x_usb_driver_probe() doesn't kill urb, but it just frees struct
si470x_device object, as depicted below:

si470x_usb_driver_probe()
  ...
  si470x_start_usb()
    ...
    usb_submit_urb()
    retval = si470x_start()
    return retval
  if (retval < 0)
    free struct si470x_device object, but don't kill urb

This patch fixes this issue by killing urb when si470x_start_usb()
fails and urb is submitted.  If si470x_start_usb() fails and urb is
not submitted, i.e. submitting usb fails, it just frees struct
si470x_device object.

Reported-by: syzbot+9ca7a12fd736d93e0232@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=94ed6dddd5a55e90fd4bab942aa4bb297741d977 [1]
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/radio/si470x/radio-si470x-usb.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/radio/si470x/radio-si470x-usb.c b/drivers/media/radio/si470x/radio-si470x-usb.c
index 6b2768623c88..aa7a580dbecc 100644
--- a/drivers/media/radio/si470x/radio-si470x-usb.c
+++ b/drivers/media/radio/si470x/radio-si470x-usb.c
@@ -727,8 +727,10 @@ static int si470x_usb_driver_probe(struct usb_interface *intf,
 
 	/* start radio */
 	retval = si470x_start_usb(radio);
-	if (retval < 0)
+	if (retval < 0 && !radio->int_in_running)
 		goto err_buf;
+	else if (retval < 0)	/* in case of radio->int_in_running == 1 */
+		goto err_all;
 
 	/* set initial frequency */
 	si470x_set_freq(radio, 87.5 * FREQ_MUL); /* available in all regions */
-- 
2.35.1

[PATCH AUTOSEL 6.0 69/73] clk: st: Fix memory leak in st_of_quadfs_setup()

[Sasha Levin]

From: Xiu Jianfeng <xiujianfeng@huawei.com>

[ Upstream commit cfd3ffb36f0d566846163118651d868e607300ba ]

If st_clk_register_quadfs_pll() fails, @lock should be freed before goto
@err_exit, otherwise will cause meory leak issue, fix it.

Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Link: https://lore.kernel.org/r/20221122133614.184910-1-xiujianfeng@huawei.com
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/st/clkgen-fsyn.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/st/clkgen-fsyn.c b/drivers/clk/st/clkgen-fsyn.c
index d820292a381d..40df1db102a7 100644
--- a/drivers/clk/st/clkgen-fsyn.c
+++ b/drivers/clk/st/clkgen-fsyn.c
@@ -1020,9 +1020,10 @@ static void __init st_of_quadfs_setup(struct device_node *np,
 
 	clk = st_clk_register_quadfs_pll(pll_name, clk_parent_name, datac->data,
 			reg, lock);
-	if (IS_ERR(clk))
+	if (IS_ERR(clk)) {
+		kfree(lock);
 		goto err_exit;
-	else
+	} else
 		pr_debug("%s: parent %s rate %u\n",
 			__clk_get_name(clk),
 			__clk_get_name(clk_get_parent(clk)),
-- 
2.35.1

[PATCH AUTOSEL 6.0 70/73] regulator: core: Use different devices for resource allocation and DT lookup

[Sasha Levin]

From: ChiYuan Huang <cy_huang@richtek.com>

[ Upstream commit 8f3cbcd6b440032ebc7f7d48a1689dcc70a4eb98 ]

Following by the below discussion, there's the potential UAF issue
between regulator and mfd.
https://lore.kernel.org/all/20221128143601.1698148-1-yangyingliang@huawei.com/

From the analysis of Yingliang

CPU A				|CPU B
mt6370_probe()			|
  devm_mfd_add_devices()	|
				|mt6370_regulator_probe()
				|  regulator_register()
				|    //allocate init_data and add it to devres
				|    regulator_of_get_init_data()
i2c_unregister_device()		|
  device_del()			|
    devres_release_all()	|
      // init_data is freed	|
      release_nodes()		|
				|  // using init_data causes UAF
				|  regulator_register()

It's common to use mfd core to create child device for the regulator.
In order to do the DT lookup for init data, the child that registered
the regulator would pass its parent as the parameter. And this causes
init data resource allocated to its parent, not itself. The issue happen
when parent device is going to release and regulator core is still doing
some operation of init data constraint for the regulator of child device.

To fix it, this patch expand 'regulator_register' API to use the
different devices for init data allocation and DT lookup.

Reported-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1670311341-32664-1-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/intel/int3472/clk_and_regulator.c | 3 ++-
 drivers/regulator/core.c                               | 8 ++++----
 drivers/regulator/devres.c                             | 2 +-
 drivers/regulator/of_regulator.c                       | 2 +-
 drivers/regulator/stm32-vrefbuf.c                      | 2 +-
 include/linux/regulator/driver.h                       | 3 ++-
 6 files changed, 11 insertions(+), 9 deletions(-)

diff --git a/drivers/platform/x86/intel/int3472/clk_and_regulator.c b/drivers/platform/x86/intel/int3472/clk_and_regulator.c
index 1cf958983e86..b2342b3d78c7 100644
--- a/drivers/platform/x86/intel/int3472/clk_and_regulator.c
+++ b/drivers/platform/x86/intel/int3472/clk_and_regulator.c
@@ -185,7 +185,8 @@ int skl_int3472_register_regulator(struct int3472_discrete_device *int3472,
 	cfg.init_data = &init_data;
 	cfg.ena_gpiod = int3472->regulator.gpio;
 
-	int3472->regulator.rdev = regulator_register(&int3472->regulator.rdesc,
+	int3472->regulator.rdev = regulator_register(int3472->dev,
+						     &int3472->regulator.rdesc,
 						     &cfg);
 	if (IS_ERR(int3472->regulator.rdev)) {
 		ret = PTR_ERR(int3472->regulator.rdev);
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 02ea917c7fd1..d7119b92c0b4 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -5386,6 +5386,7 @@ static struct regulator_coupler generic_regulator_coupler = {
 
 /**
  * regulator_register - register regulator
+ * @dev: the device that drive the regulator
  * @regulator_desc: regulator to register
  * @cfg: runtime configuration for regulator
  *
@@ -5394,7 +5395,8 @@ static struct regulator_coupler generic_regulator_coupler = {
  * or an ERR_PTR() on error.
  */
 struct regulator_dev *
-regulator_register(const struct regulator_desc *regulator_desc,
+regulator_register(struct device *dev,
+		   const struct regulator_desc *regulator_desc,
 		   const struct regulator_config *cfg)
 {
 	const struct regulator_init_data *init_data;
@@ -5403,7 +5405,6 @@ regulator_register(const struct regulator_desc *regulator_desc,
 	struct regulator_dev *rdev;
 	bool dangling_cfg_gpiod = false;
 	bool dangling_of_gpiod = false;
-	struct device *dev;
 	int ret, i;
 
 	if (cfg == NULL)
@@ -5415,8 +5416,7 @@ regulator_register(const struct regulator_desc *regulator_desc,
 		goto rinse;
 	}
 
-	dev = cfg->dev;
-	WARN_ON(!dev);
+	WARN_ON(!dev || !cfg->dev);
 
 	if (regulator_desc->name == NULL || regulator_desc->ops == NULL) {
 		ret = -EINVAL;
diff --git a/drivers/regulator/devres.c b/drivers/regulator/devres.c
index 32823a87fd40..d94db64cd490 100644
--- a/drivers/regulator/devres.c
+++ b/drivers/regulator/devres.c
@@ -221,7 +221,7 @@ struct regulator_dev *devm_regulator_register(struct device *dev,
 	if (!ptr)
 		return ERR_PTR(-ENOMEM);
 
-	rdev = regulator_register(regulator_desc, config);
+	rdev = regulator_register(dev, regulator_desc, config);
 	if (!IS_ERR(rdev)) {
 		*ptr = rdev;
 		devres_add(dev, ptr);
diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
index e12b681c72e5..bd0c5d1fd647 100644
--- a/drivers/regulator/of_regulator.c
+++ b/drivers/regulator/of_regulator.c
@@ -505,7 +505,7 @@ struct regulator_init_data *regulator_of_get_init_data(struct device *dev,
 	struct device_node *child;
 	struct regulator_init_data *init_data = NULL;
 
-	child = regulator_of_get_init_node(dev, desc);
+	child = regulator_of_get_init_node(config->dev, desc);
 	if (!child)
 		return NULL;
 
diff --git a/drivers/regulator/stm32-vrefbuf.c b/drivers/regulator/stm32-vrefbuf.c
index 30ea3bc8ca19..7a454b7b6eab 100644
--- a/drivers/regulator/stm32-vrefbuf.c
+++ b/drivers/regulator/stm32-vrefbuf.c
@@ -210,7 +210,7 @@ static int stm32_vrefbuf_probe(struct platform_device *pdev)
 						      pdev->dev.of_node,
 						      &stm32_vrefbuf_regu);
 
-	rdev = regulator_register(&stm32_vrefbuf_regu, &config);
+	rdev = regulator_register(&pdev->dev, &stm32_vrefbuf_regu, &config);
 	if (IS_ERR(rdev)) {
 		ret = PTR_ERR(rdev);
 		dev_err(&pdev->dev, "register failed with error %d\n", ret);
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index f9a7461e72b8..d3b4a3d4514a 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -687,7 +687,8 @@ static inline int regulator_err2notif(int err)
 
 
 struct regulator_dev *
-regulator_register(const struct regulator_desc *regulator_desc,
+regulator_register(struct device *dev,
+		   const struct regulator_desc *regulator_desc,
 		   const struct regulator_config *config);
 struct regulator_dev *
 devm_regulator_register(struct device *dev,
-- 
2.35.1

Re: [PATCH AUTOSEL 6.0 70/73] regulator: core: Use different devices for resource allocation and DT lookup

[ChiYuan Huang]

On Sun, Dec 18, 2022 at 11:07:38AM -0500, Sasha Levin wrote:
Hi,
  Thanks, but there's one more case not considered.
  It may cause a unexpected regulator shutdown by regulator core.

  Here's the discussion link that reported from Marek Szyprowski.
  https://lore.kernel.org/lkml/dd329b51-f11a-2af6-9549-c8a014fd5a71@samsung.com/

  I have post a patch to fix it.
  You may need to cherry-pick the below patch also.
  0debed5b117d ("regulator: core: Fix resolve supply lookup issue")

Best regards,
ChiYuan.

> From: ChiYuan Huang <cy_huang@richtek.com>
> 
> [ Upstream commit 8f3cbcd6b440032ebc7f7d48a1689dcc70a4eb98 ]
> 
> Following by the below discussion, there's the potential UAF issue
> between regulator and mfd.
> https://lore.kernel.org/all/20221128143601.1698148-1-yangyingliang@huawei.com/
> 
> >From the analysis of Yingliang
> 
> CPU A				|CPU B
> mt6370_probe()			|
>   devm_mfd_add_devices()	|
> 				|mt6370_regulator_probe()
> 				|  regulator_register()
> 				|    //allocate init_data and add it to devres
> 				|    regulator_of_get_init_data()
> i2c_unregister_device()		|
>   device_del()			|
>     devres_release_all()	|
>       // init_data is freed	|
>       release_nodes()		|
> 				|  // using init_data causes UAF
> 				|  regulator_register()
> 
> It's common to use mfd core to create child device for the regulator.
> In order to do the DT lookup for init data, the child that registered
> the regulator would pass its parent as the parameter. And this causes
> init data resource allocated to its parent, not itself. The issue happen
> when parent device is going to release and regulator core is still doing
> some operation of init data constraint for the regulator of child device.
> 
> To fix it, this patch expand 'regulator_register' API to use the
> different devices for init data allocation and DT lookup.
> 
> Reported-by: Yang Yingliang <yangyingliang@huawei.com>
> Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
> Link: https://lore.kernel.org/r/1670311341-32664-1-git-send-email-u0084500@gmail.com
> Signed-off-by: Mark Brown <broonie@kernel.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  drivers/platform/x86/intel/int3472/clk_and_regulator.c | 3 ++-
>  drivers/regulator/core.c                               | 8 ++++----
>  drivers/regulator/devres.c                             | 2 +-
>  drivers/regulator/of_regulator.c                       | 2 +-
>  drivers/regulator/stm32-vrefbuf.c                      | 2 +-
>  include/linux/regulator/driver.h                       | 3 ++-
>  6 files changed, 11 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/platform/x86/intel/int3472/clk_and_regulator.c b/drivers/platform/x86/intel/int3472/clk_and_regulator.c
> index 1cf958983e86..b2342b3d78c7 100644
> --- a/drivers/platform/x86/intel/int3472/clk_and_regulator.c
> +++ b/drivers/platform/x86/intel/int3472/clk_and_regulator.c
> @@ -185,7 +185,8 @@ int skl_int3472_register_regulator(struct int3472_discrete_device *int3472,
>  	cfg.init_data = &init_data;
>  	cfg.ena_gpiod = int3472->regulator.gpio;
>  
> -	int3472->regulator.rdev = regulator_register(&int3472->regulator.rdesc,
> +	int3472->regulator.rdev = regulator_register(int3472->dev,
> +						     &int3472->regulator.rdesc,
>  						     &cfg);
>  	if (IS_ERR(int3472->regulator.rdev)) {
>  		ret = PTR_ERR(int3472->regulator.rdev);
> diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
> index 02ea917c7fd1..d7119b92c0b4 100644
> --- a/drivers/regulator/core.c
> +++ b/drivers/regulator/core.c
> @@ -5386,6 +5386,7 @@ static struct regulator_coupler generic_regulator_coupler = {
>  
>  /**
>   * regulator_register - register regulator
> + * @dev: the device that drive the regulator
>   * @regulator_desc: regulator to register
>   * @cfg: runtime configuration for regulator
>   *
> @@ -5394,7 +5395,8 @@ static struct regulator_coupler generic_regulator_coupler = {
>   * or an ERR_PTR() on error.
>   */
>  struct regulator_dev *
> -regulator_register(const struct regulator_desc *regulator_desc,
> +regulator_register(struct device *dev,
> +		   const struct regulator_desc *regulator_desc,
>  		   const struct regulator_config *cfg)
>  {
>  	const struct regulator_init_data *init_data;
> @@ -5403,7 +5405,6 @@ regulator_register(const struct regulator_desc *regulator_desc,
>  	struct regulator_dev *rdev;
>  	bool dangling_cfg_gpiod = false;
>  	bool dangling_of_gpiod = false;
> -	struct device *dev;
>  	int ret, i;
>  
>  	if (cfg == NULL)
> @@ -5415,8 +5416,7 @@ regulator_register(const struct regulator_desc *regulator_desc,
>  		goto rinse;
>  	}
>  
> -	dev = cfg->dev;
> -	WARN_ON(!dev);
> +	WARN_ON(!dev || !cfg->dev);
>  
>  	if (regulator_desc->name == NULL || regulator_desc->ops == NULL) {
>  		ret = -EINVAL;
> diff --git a/drivers/regulator/devres.c b/drivers/regulator/devres.c
> index 32823a87fd40..d94db64cd490 100644
> --- a/drivers/regulator/devres.c
> +++ b/drivers/regulator/devres.c
> @@ -221,7 +221,7 @@ struct regulator_dev *devm_regulator_register(struct device *dev,
>  	if (!ptr)
>  		return ERR_PTR(-ENOMEM);
>  
> -	rdev = regulator_register(regulator_desc, config);
> +	rdev = regulator_register(dev, regulator_desc, config);
>  	if (!IS_ERR(rdev)) {
>  		*ptr = rdev;
>  		devres_add(dev, ptr);
> diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
> index e12b681c72e5..bd0c5d1fd647 100644
> --- a/drivers/regulator/of_regulator.c
> +++ b/drivers/regulator/of_regulator.c
> @@ -505,7 +505,7 @@ struct regulator_init_data *regulator_of_get_init_data(struct device *dev,
>  	struct device_node *child;
>  	struct regulator_init_data *init_data = NULL;
>  
> -	child = regulator_of_get_init_node(dev, desc);
> +	child = regulator_of_get_init_node(config->dev, desc);
>  	if (!child)
>  		return NULL;
>  
> diff --git a/drivers/regulator/stm32-vrefbuf.c b/drivers/regulator/stm32-vrefbuf.c
> index 30ea3bc8ca19..7a454b7b6eab 100644
> --- a/drivers/regulator/stm32-vrefbuf.c
> +++ b/drivers/regulator/stm32-vrefbuf.c
> @@ -210,7 +210,7 @@ static int stm32_vrefbuf_probe(struct platform_device *pdev)
>  						      pdev->dev.of_node,
>  						      &stm32_vrefbuf_regu);
>  
> -	rdev = regulator_register(&stm32_vrefbuf_regu, &config);
> +	rdev = regulator_register(&pdev->dev, &stm32_vrefbuf_regu, &config);
>  	if (IS_ERR(rdev)) {
>  		ret = PTR_ERR(rdev);
>  		dev_err(&pdev->dev, "register failed with error %d\n", ret);
> diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
> index f9a7461e72b8..d3b4a3d4514a 100644
> --- a/include/linux/regulator/driver.h
> +++ b/include/linux/regulator/driver.h
> @@ -687,7 +687,8 @@ static inline int regulator_err2notif(int err)
>  
>  
>  struct regulator_dev *
> -regulator_register(const struct regulator_desc *regulator_desc,
> +regulator_register(struct device *dev,
> +		   const struct regulator_desc *regulator_desc,
>  		   const struct regulator_config *config);
>  struct regulator_dev *
>  devm_regulator_register(struct device *dev,
> -- 
> 2.35.1
> 

Re: [PATCH AUTOSEL 6.0 70/73] regulator: core: Use different devices for resource allocation and DT lookup

[Sasha Levin]

On Mon, Dec 19, 2022 at 09:07:01AM +0800, ChiYuan Huang wrote:
>On Sun, Dec 18, 2022 at 11:07:38AM -0500, Sasha Levin wrote:
>Hi,
>  Thanks, but there's one more case not considered.
>  It may cause a unexpected regulator shutdown by regulator core.
>
>  Here's the discussion link that reported from Marek Szyprowski.
>  https://lore.kernel.org/lkml/dd329b51-f11a-2af6-9549-c8a014fd5a71@samsung.com/
>
>  I have post a patch to fix it.
>  You may need to cherry-pick the below patch also.
>  0debed5b117d ("regulator: core: Fix resolve supply lookup issue")

I'll take it too, thanks!

-- 
Thanks,
Sasha

[PATCH AUTOSEL 6.0 71/73] Bluetooth: hci_bcm: Add CYW4373A0 support

[Sasha Levin]

From: Marek Vasut <marex@denx.de>

[ Upstream commit 02d056a3404e20245a69dcb4022a0930085fc5ec ]

CYW4373A0 is a Wi-Fi + Bluetooth combo device from Cypress.
This chip is present e.g. on muRata 2AE module.

This chip has additional quirk where the HCI command 0xfc45, used on
older chips to switch UART clock from 24 MHz to 48 MHz, to support
baudrates over 3 Mbdps, is no longer recognized by this newer chip.
This newer chip can configure the 4 Mbdps baudrate without the need
to issue HCI command 0xfc45, so add flag to indicate this and do not
issue the command on this chip to avoid failure to set 4 Mbdps baud
rate.

It is not clear whether there is a way to determine which chip does
and which chip does not support the HCI command 0xfc45, other than
trial and error.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/hci_bcm.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index d7e0b75db8a6..2b6c0e1922cb 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -53,11 +53,13 @@
  * struct bcm_device_data - device specific data
  * @no_early_set_baudrate: Disallow set baudrate before driver setup()
  * @drive_rts_on_open: drive RTS signal on ->open() when platform requires it
+ * @no_uart_clock_set: UART clock set command for >3Mbps mode is unavailable
  * @max_autobaud_speed: max baudrate supported by device in autobaud mode
  */
 struct bcm_device_data {
 	bool	no_early_set_baudrate;
 	bool	drive_rts_on_open;
+	bool	no_uart_clock_set;
 	u32	max_autobaud_speed;
 };
 
@@ -100,6 +102,7 @@ struct bcm_device_data {
  * @is_suspended: whether flow control is currently disabled
  * @no_early_set_baudrate: don't set_baudrate before setup()
  * @drive_rts_on_open: drive RTS signal on ->open() when platform requires it
+ * @no_uart_clock_set: UART clock set command for >3Mbps mode is unavailable
  * @pcm_int_params: keep the initial PCM configuration
  * @use_autobaud_mode: start Bluetooth device in autobaud mode
  * @max_autobaud_speed: max baudrate supported by device in autobaud mode
@@ -140,6 +143,7 @@ struct bcm_device {
 #endif
 	bool			no_early_set_baudrate;
 	bool			drive_rts_on_open;
+	bool			no_uart_clock_set;
 	bool			use_autobaud_mode;
 	u8			pcm_int_params[5];
 	u32			max_autobaud_speed;
@@ -172,10 +176,11 @@ static inline void host_set_baudrate(struct hci_uart *hu, unsigned int speed)
 static int bcm_set_baudrate(struct hci_uart *hu, unsigned int speed)
 {
 	struct hci_dev *hdev = hu->hdev;
+	struct bcm_data *bcm = hu->priv;
 	struct sk_buff *skb;
 	struct bcm_update_uart_baud_rate param;
 
-	if (speed > 3000000) {
+	if (speed > 3000000 && !bcm->dev->no_uart_clock_set) {
 		struct bcm_write_uart_clock_setting clock;
 
 		clock.type = BCM_UART_CLOCK_48MHZ;
@@ -1529,6 +1534,7 @@ static int bcm_serdev_probe(struct serdev_device *serdev)
 		bcmdev->max_autobaud_speed = data->max_autobaud_speed;
 		bcmdev->no_early_set_baudrate = data->no_early_set_baudrate;
 		bcmdev->drive_rts_on_open = data->drive_rts_on_open;
+		bcmdev->no_uart_clock_set = data->no_uart_clock_set;
 	}
 
 	return hci_uart_register_device(&bcmdev->serdev_hu, &bcm_proto);
@@ -1550,6 +1556,10 @@ static struct bcm_device_data bcm43438_device_data = {
 	.drive_rts_on_open = true,
 };
 
+static struct bcm_device_data cyw4373a0_device_data = {
+	.no_uart_clock_set = true,
+};
+
 static struct bcm_device_data cyw55572_device_data = {
 	.max_autobaud_speed = 921600,
 };
@@ -1566,6 +1576,7 @@ static const struct of_device_id bcm_bluetooth_of_match[] = {
 	{ .compatible = "brcm,bcm4349-bt", .data = &bcm43438_device_data },
 	{ .compatible = "brcm,bcm43540-bt", .data = &bcm4354_device_data },
 	{ .compatible = "brcm,bcm4335a0" },
+	{ .compatible = "cypress,cyw4373a0-bt", .data = &cyw4373a0_device_data },
 	{ .compatible = "infineon,cyw55572-bt", .data = &cyw55572_device_data },
 	{ },
 };
-- 
2.35.1

[PATCH AUTOSEL 6.0 72/73] Bluetooth: Add quirk to disable extended scanning

[Sasha Levin]

From: Sven Peter <sven@svenpeter.dev>

[ Upstream commit 392fca352c7a95e2828d49e7500e26d0c87ca265 ]

Broadcom 4377 controllers found in Apple x86 Macs with the T2 chip
claim to support extended scanning when querying supported states,

< HCI Command: LE Read Supported St.. (0x08|0x001c) plen 0
> HCI Event: Command Complete (0x0e) plen 12
      LE Read Supported States (0x08|0x001c) ncmd 1
        Status: Success (0x00)
        States: 0x000003ffffffffff
[...]
          LE Set Extended Scan Parameters (Octet 37 - Bit 5)
          LE Set Extended Scan Enable (Octet 37 - Bit 6)
[...]

, but then fail to actually implement the extended scanning:

< HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8
        Own address type: Random (0x01)
        Filter policy: Accept all advertisement (0x00)
        PHYs: 0x01
        Entry 0: LE 1M
          Type: Active (0x01)
          Interval: 11.250 msec (0x0012)
          Window: 11.250 msec (0x0012)
> HCI Event: Command Complete (0x0e) plen 4
      LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1
        Status: Unknown HCI Command (0x01)

Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/bluetooth/hci.h      | 10 ++++++++++
 include/net/bluetooth/hci_core.h |  4 +++-
 2 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index 4518c63e9d17..78c55b69919d 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -274,6 +274,16 @@ enum {
 	 * during the hdev->setup vendor callback.
 	 */
 	HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN,
+
+	/*
+	 * When this quirk is set, the HCI_OP_LE_SET_EXT_SCAN_ENABLE command is
+	 * disabled. This is required for some Broadcom controllers which
+	 * erroneously claim to support extended scanning.
+	 *
+	 * This quirk can be set before hci_register_dev is called or
+	 * during the hdev->setup vendor callback.
+	 */
+	HCI_QUIRK_BROKEN_EXT_SCAN,
 };
 
 /* HCI device flags */
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index e7862903187d..29d1254f9856 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -1681,7 +1681,9 @@ void hci_conn_del_sysfs(struct hci_conn *conn);
 
 /* Use ext scanning if set ext scan param and ext scan enable is supported */
 #define use_ext_scan(dev) (((dev)->commands[37] & 0x20) && \
-			   ((dev)->commands[37] & 0x40))
+			   ((dev)->commands[37] & 0x40) && \
+			   !test_bit(HCI_QUIRK_BROKEN_EXT_SCAN, &(dev)->quirks))
+
 /* Use ext create connection if command is supported */
 #define use_ext_conn(dev) ((dev)->commands[37] & 0x80)
 
-- 
2.35.1

[PATCH AUTOSEL 6.0 73/73] Bluetooth: Add quirk to disable MWS Transport Configuration

[Sasha Levin]

From: Sven Peter <sven@svenpeter.dev>

[ Upstream commit ffcb0a445ec2d5753751437706aa0a7ea8351099 ]

Broadcom 4378/4387 controllers found in Apple Silicon Macs claim to
support getting MWS Transport Layer Configuration,

< HCI Command: Read Local Supported... (0x04|0x0002) plen 0
> HCI Event: Command Complete (0x0e) plen 68
      Read Local Supported Commands (0x04|0x0002) ncmd 1
        Status: Success (0x00)
[...]
          Get MWS Transport Layer Configuration (Octet 30 - Bit 3)]
[...]

, but then don't actually allow the required command:

> HCI Event: Command Complete (0x0e) plen 15
      Get MWS Transport Layer Configuration (0x05|0x000c) ncmd 1
        Status: Command Disallowed (0x0c)
        Number of transports: 0
        Baud rate list: 0 entries
        00 00 00 00 00 00 00 00 00 00

Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/bluetooth/hci.h      | 10 ++++++++++
 include/net/bluetooth/hci_core.h |  3 +++
 net/bluetooth/hci_sync.c         |  2 +-
 3 files changed, 14 insertions(+), 1 deletion(-)

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index 78c55b69919d..dd455ce06770 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -284,6 +284,16 @@ enum {
 	 * during the hdev->setup vendor callback.
 	 */
 	HCI_QUIRK_BROKEN_EXT_SCAN,
+
+	/*
+	 * When this quirk is set, the HCI_OP_GET_MWS_TRANSPORT_CONFIG command is
+	 * disabled. This is required for some Broadcom controllers which
+	 * erroneously claim to support MWS Transport Layer Configuration.
+	 *
+	 * This quirk can be set before hci_register_dev is called or
+	 * during the hdev->setup vendor callback.
+	 */
+	HCI_QUIRK_BROKEN_MWS_TRANSPORT_CONFIG,
 };
 
 /* HCI device flags */
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 29d1254f9856..6afb4771ce35 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -1711,6 +1711,9 @@ void hci_conn_del_sysfs(struct hci_conn *conn);
 	((dev)->le_features[3] & HCI_LE_CIS_PERIPHERAL)
 #define bis_capable(dev) ((dev)->le_features[3] & HCI_LE_ISO_BROADCASTER)
 
+#define mws_transport_config_capable(dev) (((dev)->commands[30] & 0x08) && \
+	(!test_bit(HCI_QUIRK_BROKEN_MWS_TRANSPORT_CONFIG, &(dev)->quirks)))
+
 /* ----- HCI protocols ----- */
 #define HCI_PROTO_DEFER             0x01
 
diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
index a5e89e1b5452..117537f3e7ad 100644
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
@@ -3940,7 +3940,7 @@ static int hci_read_local_pairing_opts_sync(struct hci_dev *hdev)
 /* Get MWS transport configuration if the HCI command is supported */
 static int hci_get_mws_transport_config_sync(struct hci_dev *hdev)
 {
-	if (!(hdev->commands[30] & 0x08))
+	if (!mws_transport_config_capable(hdev))
 		return 0;
 
 	return __hci_cmd_sync_status(hdev, HCI_OP_GET_MWS_TRANSPORT_CONFIG,
-- 
2.35.1