public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Jim Cromie <jim.cromie@gmail.com>
To: linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	amd-gfx@lists.freedesktop.org,
	intel-gvt-dev@lists.freedesktop.org,
	intel-gfx@lists.freedesktop.org
Cc: jani.nikula@intel.com, ville.syrjala@linux.intel.com,
	daniel.vetter@ffwll.ch, seanpaul@chromium.org,
	robdclark@gmail.com, jbaron@akamai.com,
	gregkh@linuxfoundation.org, Jim Cromie <jim.cromie@gmail.com>
Subject: [PATCH v2 15/20] test-dyndbg: build test_dynamic_debug_submod
Date: Fri, 13 Jan 2023 12:30:11 -0700	[thread overview]
Message-ID: <20230113193016.749791-16-jim.cromie@gmail.com> (raw)
In-Reply-To: <20230113193016.749791-1-jim.cromie@gmail.com>

CONFIG_DRM_USE_DYNAMIC_DEBUG=y has a regression; drm subsystem
modules, which depend upon drm.ko and use the drm.debug API, do not
get enabled when __drm_debug is set by `modprobe drm debug=0x1f`.

With =N, __drm_debug is checked before logging the msg, so the
end-of-modprobe debug=$init affected all later checks.  But with =y,
each run-time check is replaced by a static-key that is set at
end-of-modprobe.

This creates a chicken-egg dependency; i915 must be modprobed before
its drm.debugs are enabled, but drm.ko (and __drm_debug=$init) must be
done before modprobe i915, so its callsites arent there yet to be
enabled.

The WIP-fix is to split DECLARE_DYNDBG_CLASSMAP to:

DYNDBG_CLASSMAP_DEFINE - invoked in 'parent'
DYNDBG_CLASSMAP_USE - invoked in dependent, to USE the exported definition

To prove the fix w/o involving DRM, we need 2 modules, one dependent
on the other.  Add test_dynamic_debug_submod.ko, which _USEs the
classmaps _exported by test_dynamic_debug.ko

To keep code to a minimum, test_dynamic_debug.c ifdefs on
TEST_DYNAMIC_DEBUG_SUBMOD to build either parent or dependent, with
either DYNDBG_CLASSMAP_DEFINE or DYNDBG_CLASSMAP_USE blocks.

So test_dynamic_debug_submod.c is just 2 lines: include parent after
defining SUBMOD.  This also gives the 2 modules identical logging
behavior as a baseline.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
---
 lib/Makefile                    |  3 +-
 lib/test_dynamic_debug.c        | 50 ++++++++++++++++++++++++++++-----
 lib/test_dynamic_debug_submod.c | 10 +++++++
 3 files changed, 55 insertions(+), 8 deletions(-)
 create mode 100644 lib/test_dynamic_debug_submod.c

diff --git a/lib/Makefile b/lib/Makefile
index 59bd7c2f793a..0f04c59bdc8e 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -78,7 +78,7 @@ obj-$(CONFIG_TEST_SORT) += test_sort.o
 obj-$(CONFIG_TEST_USER_COPY) += test_user_copy.o
 obj-$(CONFIG_TEST_STATIC_KEYS) += test_static_keys.o
 obj-$(CONFIG_TEST_STATIC_KEYS) += test_static_key_base.o
-obj-$(CONFIG_TEST_DYNAMIC_DEBUG) += test_dynamic_debug.o
+obj-$(CONFIG_TEST_DYNAMIC_DEBUG) += test_dynamic_debug.o test_dynamic_debug_submod.o
 obj-$(CONFIG_TEST_PRINTF) += test_printf.o
 obj-$(CONFIG_TEST_SCANF) += test_scanf.o
 obj-$(CONFIG_TEST_BITMAP) += test_bitmap.o
@@ -100,6 +100,7 @@ obj-$(CONFIG_KPROBES_SANITY_TEST) += test_kprobes.o
 obj-$(CONFIG_TEST_REF_TRACKER) += test_ref_tracker.o
 CFLAGS_test_fprobe.o += $(CC_FLAGS_FTRACE)
 obj-$(CONFIG_FPROBE_SANITY_TEST) += test_fprobe.o
+
 #
 # CFLAGS for compiling floating point code inside the kernel. x86/Makefile turns
 # off the generation of FPU/SSE* instructions for kernel proper but FPU_FLAGS
diff --git a/lib/test_dynamic_debug.c b/lib/test_dynamic_debug.c
index e678884066bf..39d4f63cade1 100644
--- a/lib/test_dynamic_debug.c
+++ b/lib/test_dynamic_debug.c
@@ -6,7 +6,11 @@
  *      Jim Cromie	<jim.cromie@gmail.com>
  */
 
-#define pr_fmt(fmt) "test_dd: " fmt
+#if defined(TEST_DYNAMIC_DEBUG_SUBMOD)
+  #define pr_fmt(fmt) "test_dd_submod: " fmt
+#else
+  #define pr_fmt(fmt) "test_dd: " fmt
+#endif
 
 #define DEBUG /* enable all prdbgs (plain & class'd) at compiletime */
 
@@ -49,6 +53,13 @@ module_param_cb(do_prints, &param_ops_do_prints, NULL, 0600);
 	};								\
 	module_param_cb(_flags##_##_model, &param_ops_dyndbg_classes, &_flags##_model, 0600)
 
+/*
+ * dynamic-debug imitates drm.debug model's use of enums (DRM_UT_CORE
+ * etc) to define it's classes/categories.  dyndbg allows class-id's
+ * 0..62, reserving 63 for plain old (non-class'd) prdbgs.  A module
+ * can define multiple classmaps, as long as they share the range.
+ */
+
 /* numeric input, independent bits */
 enum cat_disjoint_bits {
 	D2_CORE = 0,
@@ -61,7 +72,36 @@ enum cat_disjoint_bits {
 	D2_LEASE,
 	D2_DP,
 	D2_DRMRES };
+
+/* symbolic input, independent bits */
+enum cat_disjoint_names { LOW = 10, MID, HI };
+
+/* numeric verbosity, V2 > V1 related */
+enum cat_level_num { V0 = 14, V1, V2, V3, V4, V5, V6, V7 };
+
+/* symbolic verbosity */
+enum cat_level_names { L0 = 22, L1, L2, L3, L4, L5, L6, L7 };
+
+#if defined(TEST_DYNAMIC_DEBUG_SUBMOD)
+
+/* use the classmaps defined in 'parent' module below */
+DYNDBG_CLASSMAP_USE(map_disjoint_bits);
+DYNDBG_CLASSMAP_USE(map_disjoint_names);
+DYNDBG_CLASSMAP_USE(map_level_num);
+DYNDBG_CLASSMAP_USE(map_level_names);
+
+#else
+
+/*
+ * parent module, define a classmap of each of 4 types.
+ * enum values are class-ids
+ * enum symbols are stringified, used as classnames
+ * param bits are mapped in order: 0..N
+ * (a straight, obvious, linear map is encouraged)
+ */
+
 DYNDBG_CLASSMAP_DEFINE(map_disjoint_bits, DD_CLASS_TYPE_DISJOINT_BITS,
+		       /* bits 0..N of param are mapped to these class-ids */
 		       D2_CORE,
 		       D2_DRIVER,
 		       D2_KMS,
@@ -75,27 +115,23 @@ DYNDBG_CLASSMAP_DEFINE(map_disjoint_bits, DD_CLASS_TYPE_DISJOINT_BITS,
 DD_SYS_WRAP(disjoint_bits, p);
 DD_SYS_WRAP(disjoint_bits, T);
 
-/* symbolic input, independent bits */
-enum cat_disjoint_names { LOW = 10, MID, HI };
 DYNDBG_CLASSMAP_DEFINE(map_disjoint_names, DD_CLASS_TYPE_DISJOINT_NAMES,
 		       LOW, MID, HI);
 DD_SYS_WRAP(disjoint_names, p);
 DD_SYS_WRAP(disjoint_names, T);
 
-/* numeric verbosity, V2 > V1 related */
-enum cat_level_num { V0 = 14, V1, V2, V3, V4, V5, V6, V7 };
 DYNDBG_CLASSMAP_DEFINE(map_level_num, DD_CLASS_TYPE_LEVEL_NUM,
 		       V0, V1, V2, V3, V4, V5, V6, V7);
 DD_SYS_WRAP(level_num, p);
 DD_SYS_WRAP(level_num, T);
 
-/* symbolic verbosity */
-enum cat_level_names { L0 = 22, L1, L2, L3, L4, L5, L6, L7 };
 DYNDBG_CLASSMAP_DEFINE(map_level_names, DD_CLASS_TYPE_LEVEL_NAMES,
 		       L0, L1, L2, L3, L4, L5, L6, L7);
 DD_SYS_WRAP(level_names, p);
 DD_SYS_WRAP(level_names, T);
 
+#endif /* TEST_DYNAMIC_DEBUG_SUBMOD */
+
 /* stand-in for all pr_debug etc */
 #define prdbg(SYM) __pr_debug_cls(SYM, #SYM " msg\n")
 
diff --git a/lib/test_dynamic_debug_submod.c b/lib/test_dynamic_debug_submod.c
new file mode 100644
index 000000000000..f4ee7a6d6989
--- /dev/null
+++ b/lib/test_dynamic_debug_submod.c
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Kernel module for testing dynamic_debug
+ *
+ * Authors:
+ *      Jim Cromie	<jim.cromie@gmail.com>
+ */
+
+#define TEST_DYNAMIC_DEBUG_SUBMOD
+#include "test_dynamic_debug.c"
-- 
2.39.0


  parent reply	other threads:[~2023-01-13 19:32 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-13 19:29 [PATCH v2 00/20] DRM_USE_DYNAMIC_DEBUG regression Jim Cromie
2023-01-13 19:29 ` [PATCH v2 01/20] test-dyndbg: fixup CLASSMAP usage error Jim Cromie
2023-01-13 19:29 ` [PATCH v2 02/20] test-dyndbg: show that DEBUG enables prdbgs at compiletime Jim Cromie
2023-01-13 19:29 ` [PATCH v2 03/20] dyndbg: replace classmap list with a vector Jim Cromie
2023-01-13 19:30 ` [PATCH v2 04/20] dyndbg: make ddebug_apply_class_bitmap more selective Jim Cromie
2023-01-13 19:30 ` [PATCH v2 05/20] dyndbg: split param_set_dyndbg_classes to inner/outer Jim Cromie
2023-01-13 19:30 ` [PATCH v2 06/20] dyndbg: drop NUM_TYPE_ARRAY Jim Cromie
2023-01-13 19:30 ` [PATCH v2 07/20] dyndbg: reduce verbose/debug clutter Jim Cromie
2023-01-13 19:30 ` [PATCH v2 08/20] dyndbg: tighten ddebug_class_name() 1st arg Jim Cromie
2023-01-13 19:30 ` [PATCH v2 09/20] dyndbg: constify ddebug_apply_class_bitmap args Jim Cromie
2023-01-13 19:30 ` [PATCH v2 10/20] dyndbg-API: split DECLARE_(DYNDBG_CLASSMAP) to $1(_DEFINE|_USE) Jim Cromie
2023-01-13 19:30 ` [PATCH v2 11/20] dyndbg-API: specialize DYNDBG_CLASSMAP_(DEFINE|USE) Jim Cromie
2023-01-13 19:30 ` [PATCH v2 12/20] dyndbg-API: DYNDBG_CLASSMAP_USE drop extra args Jim Cromie
2023-01-13 19:30 ` [PATCH v2 13/20] dyndbg-API: DYNDBG_CLASSMAP_DEFINE() improvements Jim Cromie
2023-01-13 19:30 ` [PATCH v2 14/20] drm_print: fix stale macro-name in comment Jim Cromie
2023-01-13 19:30 ` Jim Cromie [this message]
2023-01-13 19:30 ` [PATCH v2 16/20] test-dyndbg: rename DD_SYS_WRAP to DYNDBG_CLASSMAP_PARAM Jim Cromie
2023-01-13 19:30 ` [PATCH v2 17/20] test-dyndbg: disable WIP dyndbg-trace params Jim Cromie
2023-01-13 19:30 ` [PATCH v2 18/20] test-dyndbg: tune sub-module behavior Jim Cromie
2023-01-13 19:30 ` [PATCH v2 19/20] dyndbg: unwrap __ddebug_add_module inner function NOTYET Jim Cromie
2023-01-13 19:30 ` [PATCH v2 20/20] jump_label: RFC - tolerate toggled state Jim Cromie
2023-01-17 11:57   ` Peter Zijlstra
2023-02-16 17:21     ` Jason Baron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230113193016.749791-16-jim.cromie@gmail.com \
    --to=jim.cromie@gmail.com \
    --cc=amd-gfx@lists.freedesktop.org \
    --cc=daniel.vetter@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=intel-gvt-dev@lists.freedesktop.org \
    --cc=jani.nikula@intel.com \
    --cc=jbaron@akamai.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robdclark@gmail.com \
    --cc=seanpaul@chromium.org \
    --cc=ville.syrjala@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox