From: "Théo Lebrun" <theo.lebrun@bootlin.com>
To: Russell King <linux@armlinux.org.uk>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jiri Slaby <jirislaby@kernel.org>
Cc: linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org,
"Linus Walleij" <linus.walleij@linaro.org>,
"Grégory Clement" <gregory.clement@bootlin.com>,
"Alexandre Belloni" <alexandre.belloni@bootlin.com>,
"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
"Vladimir Kondratiev" <vladimir.kondratiev@mobileye.com>,
"Tawfik Bayouk" <tawfik.bayouk@mobileye.com>,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>,
"Théo Lebrun" <theo.lebrun@bootlin.com>
Subject: [PATCH v6 8/8] tty: serial: amba-pl011: factor QDF2400 SoC erratum 44 out of probe
Date: Thu, 07 Dec 2023 18:56:13 +0100 [thread overview]
Message-ID: <20231207-mbly-uart-v6-8-e384afa5e78c@bootlin.com> (raw)
In-Reply-To: <20231207-mbly-uart-v6-0-e384afa5e78c@bootlin.com>
On this platform, different vendor data is used. That requires a
compile-time check as we access (1) a global boolean & (2) our local
vendor data. Both symbols are accessible only when
CONFIG_ACPI_SPCR_TABLE is enabled.
Factor the vendor data overriding to a separate function that is empty
when CONFIG_ACPI_SPCR_TABLE is not defined.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
drivers/tty/serial/amba-pl011.c | 25 ++++++++++++++++++-------
1 file changed, 18 insertions(+), 7 deletions(-)
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index fe910c5f3489..d50e3c14b0e4 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2869,6 +2869,22 @@ static int pl011_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(pl011_dev_pm_ops, pl011_suspend, pl011_resume);
+#ifdef CONFIG_ACPI_SPCR_TABLE
+static void qpdf2400_erratum44_workaround(struct device *dev,
+ struct uart_amba_port *uap)
+{
+ if (!qdf2400_e44_present)
+ return;
+
+ dev_info(dev, "working around QDF2400 SoC erratum 44\n");
+ uap->vendor = &vendor_qdt_qdf2400_e44;
+}
+#else
+static void qpdf2400_erratum44_workaround(struct device *dev,
+ struct uart_amba_port *uap)
+{ /* empty */ }
+#endif
+
static int sbsa_uart_probe(struct platform_device *pdev)
{
struct uart_amba_port *uap;
@@ -2904,13 +2920,8 @@ static int sbsa_uart_probe(struct platform_device *pdev)
return ret;
uap->port.irq = ret;
-#ifdef CONFIG_ACPI_SPCR_TABLE
- if (qdf2400_e44_present) {
- dev_info(&pdev->dev, "working around QDF2400 SoC erratum 44\n");
- uap->vendor = &vendor_qdt_qdf2400_e44;
- } else
-#endif
- uap->vendor = &vendor_sbsa;
+ uap->vendor = &vendor_sbsa;
+ qpdf2400_erratum44_workaround(&pdev->dev, uap);
uap->reg_offset = uap->vendor->reg_offset;
uap->fifosize = 32;
--
2.43.0
prev parent reply other threads:[~2023-12-07 17:57 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-07 17:56 [PATCH v6 0/8] Cleanup AMBA PL011 driver Théo Lebrun
2023-12-07 17:56 ` [PATCH v6 1/8] tty: serial: amba: Use linux/{bits,bitfield}.h macros Théo Lebrun
2023-12-07 17:56 ` [PATCH v6 2/8] tty: serial: amba-pl011: fix whitespace formatting Théo Lebrun
2023-12-07 17:56 ` [PATCH v6 3/8] tty: serial: amba-pl011: replace TIOCMBIT macros by static functions Théo Lebrun
2023-12-07 17:56 ` [PATCH v6 4/8] tty: serial: amba-pl011: avoid quoted string split across lines Théo Lebrun
2023-12-07 17:56 ` [PATCH v6 5/8] tty: serial: amba-pl011: fix formatting of conditions Théo Lebrun
2023-12-07 17:56 ` [PATCH v6 6/8] tty: serial: amba-pl011: fix miscellaneous checkpatch warnings Théo Lebrun
2023-12-07 17:56 ` [PATCH v6 7/8] tty: serial: amba-pl011: unindent pl011_console_get_options function body Théo Lebrun
2023-12-07 17:56 ` Théo Lebrun [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231207-mbly-uart-v6-8-e384afa5e78c@bootlin.com \
--to=theo.lebrun@bootlin.com \
--cc=alexandre.belloni@bootlin.com \
--cc=gregkh@linuxfoundation.org \
--cc=gregory.clement@bootlin.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=jirislaby@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=tawfik.bayouk@mobileye.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=vladimir.kondratiev@mobileye.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox