[PATCH AUTOSEL 4.19 1/3] usb: chipidea: udc: handle USB Error Interrupt if IOC not set

[PATCH AUTOSEL 4.19 1/3] usb: chipidea: udc: handle USB Error Interrupt if IOC not set

[Sasha Levin]

From: Xu Yang <xu.yang_2@nxp.com>

[ Upstream commit 548f48b66c0c5d4b9795a55f304b7298cde2a025 ]

As per USBSTS register description about UEI:

  When completion of a USB transaction results in an error condition, this
  bit is set by the Host/Device Controller. This bit is set along with the
  USBINT bit, if the TD on which the error interrupt occurred also had its
  interrupt on complete (IOC) bit set.

UI is set only when IOC set. Add checking UEI to fix miss call
isr_tr_complete_handler() when IOC have not set and transfer error happen.

Acked-by: Peter Chen <peter.chen@kernel.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240926022906.473319-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/chipidea/udc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 6a626f41cded1..27be93d12b59c 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1902,7 +1902,7 @@ static irqreturn_t udc_irq(struct ci_hdrc *ci)
 			}
 		}
 
-		if (USBi_UI  & intr)
+		if ((USBi_UI | USBi_UEI) & intr)
 			isr_tr_complete_handler(ci);
 
 		if ((USBi_SLI & intr) && !(ci->suspended)) {
-- 
2.43.0

[PATCH AUTOSEL 4.19 2/3] phy: tegra: xusb: Set fwnode for xusb port devices

[Sasha Levin]

From: Saravana Kannan <saravanak@google.com>

[ Upstream commit 74ffe43bad3af3e2a786ca017c205555ba87ebad ]

fwnode needs to be set for a device for fw_devlink to be able to
track/enforce its dependencies correctly. Without this, you'll see error
messages like this when the supplier has probed and tries to make sure
all its fwnode consumers are linked to it using device links:

tegra-xusb-padctl 3520000.padctl: Failed to create device link (0x180) with 1-0008

Reported-by: Jon Hunter <jonathanh@nvidia.com>
Closes: https://lore.kernel.org/all/20240910130019.35081-1-jonathanh@nvidia.com/
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Suggested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20241024061347.1771063-3-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/phy/tegra/xusb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c
index 17211b31e1ed4..943dfff49592d 100644
--- a/drivers/phy/tegra/xusb.c
+++ b/drivers/phy/tegra/xusb.c
@@ -519,7 +519,7 @@ static int tegra_xusb_port_init(struct tegra_xusb_port *port,
 
 	device_initialize(&port->dev);
 	port->dev.type = &tegra_xusb_port_type;
-	port->dev.of_node = of_node_get(np);
+	device_set_node(&port->dev, of_fwnode_handle(of_node_get(np)));
 	port->dev.parent = padctl->dev;
 
 	err = dev_set_name(&port->dev, "%s-%u", name, index);
-- 
2.43.0

[PATCH AUTOSEL 4.19 3/3] powerpc/prom_init: Fixup missing powermac #size-cells

[Sasha Levin]

From: Michael Ellerman <mpe@ellerman.id.au>

[ Upstream commit cf89c9434af122f28a3552e6f9cc5158c33ce50a ]

On some powermacs `escc` nodes are missing `#size-cells` properties,
which is deprecated and now triggers a warning at boot since commit
045b14ca5c36 ("of: WARN on deprecated #address-cells/#size-cells
handling").

For example:

  Missing '#size-cells' in /pci@f2000000/mac-io@c/escc@13000
  WARNING: CPU: 0 PID: 0 at drivers/of/base.c:133 of_bus_n_size_cells+0x98/0x108
  Hardware name: PowerMac3,1 7400 0xc0209 PowerMac
  ...
  Call Trace:
    of_bus_n_size_cells+0x98/0x108 (unreliable)
    of_bus_default_count_cells+0x40/0x60
    __of_get_address+0xc8/0x21c
    __of_address_to_resource+0x5c/0x228
    pmz_init_port+0x5c/0x2ec
    pmz_probe.isra.0+0x144/0x1e4
    pmz_console_init+0x10/0x48
    console_init+0xcc/0x138
    start_kernel+0x5c4/0x694

As powermacs boot via prom_init it's possible to add the missing
properties to the device tree during boot, avoiding the warning. Note
that `escc-legacy` nodes are also missing `#size-cells` properties, but
they are skipped by the macio driver, so leave them alone.

Depends-on: 045b14ca5c36 ("of: WARN on deprecated #address-cells/#size-cells handling")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241126025710.591683-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/prom_init.c | 29 +++++++++++++++++++++++++++--
 1 file changed, 27 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 29a8087a49010..7a92794309e31 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -2742,7 +2742,7 @@ static void __init fixup_device_tree_chrp(void)
 #endif
 
 #if defined(CONFIG_PPC64) && defined(CONFIG_PPC_PMAC)
-static void __init fixup_device_tree_pmac(void)
+static void __init fixup_device_tree_pmac64(void)
 {
 	phandle u3, i2c, mpic;
 	u32 u3_rev;
@@ -2782,7 +2782,31 @@ static void __init fixup_device_tree_pmac(void)
 		     &parent, sizeof(parent));
 }
 #else
-#define fixup_device_tree_pmac()
+#define fixup_device_tree_pmac64()
+#endif
+
+#ifdef CONFIG_PPC_PMAC
+static void __init fixup_device_tree_pmac(void)
+{
+	__be32 val = 1;
+	char type[8];
+	phandle node;
+
+	// Some pmacs are missing #size-cells on escc nodes
+	for (node = 0; prom_next_node(&node); ) {
+		type[0] = '\0';
+		prom_getprop(node, "device_type", type, sizeof(type));
+		if (prom_strcmp(type, "escc"))
+			continue;
+
+		if (prom_getproplen(node, "#size-cells") != PROM_ERROR)
+			continue;
+
+		prom_setprop(node, NULL, "#size-cells", &val, sizeof(val));
+	}
+}
+#else
+static inline void fixup_device_tree_pmac(void) { }
 #endif
 
 #ifdef CONFIG_PPC_EFIKA
@@ -3007,6 +3031,7 @@ static void __init fixup_device_tree(void)
 	fixup_device_tree_maple_memory_controller();
 	fixup_device_tree_chrp();
 	fixup_device_tree_pmac();
+	fixup_device_tree_pmac64();
 	fixup_device_tree_efika();
 	fixup_device_tree_pasemi();
 }
-- 
2.43.0

Re: [PATCH AUTOSEL 4.19 2/3] phy: tegra: xusb: Set fwnode for xusb port devices

[Saravana Kannan]

On Wed, Dec 4, 2024 at 3:31 PM Sasha Levin <sashal@kernel.org> wrote:
>
> From: Saravana Kannan <saravanak@google.com>
>
> [ Upstream commit 74ffe43bad3af3e2a786ca017c205555ba87ebad ]
>
> fwnode needs to be set for a device for fw_devlink to be able to
> track/enforce its dependencies correctly. Without this, you'll see error
> messages like this when the supplier has probed and tries to make sure
> all its fwnode consumers are linked to it using device links:
>
> tegra-xusb-padctl 3520000.padctl: Failed to create device link (0x180) with 1-0008
>
> Reported-by: Jon Hunter <jonathanh@nvidia.com>
> Closes: https://lore.kernel.org/all/20240910130019.35081-1-jonathanh@nvidia.com/
> Tested-by: Jon Hunter <jonathanh@nvidia.com>
> Suggested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> Signed-off-by: Saravana Kannan <saravanak@google.com>
> Acked-by: Thierry Reding <treding@nvidia.com>
> Link: https://lore.kernel.org/r/20241024061347.1771063-3-saravanak@google.com
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

As mentioned in the original cover letter:

PSA: Do not pull any of these patches into stable kernels. fw_devlink
had a lot of changes that landed in the last year. It's hard to ensure
cherry-picks have picked up all the dependencies correctly. If any of
these really need to get cherry-picked into stable kernels, cc me and
wait for my explicit Ack.

Is there a pressing need for this in 4.19?

-Saravana

> ---
>  drivers/phy/tegra/xusb.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c
> index 17211b31e1ed4..943dfff49592d 100644
> --- a/drivers/phy/tegra/xusb.c
> +++ b/drivers/phy/tegra/xusb.c
> @@ -519,7 +519,7 @@ static int tegra_xusb_port_init(struct tegra_xusb_port *port,
>
>         device_initialize(&port->dev);
>         port->dev.type = &tegra_xusb_port_type;
> -       port->dev.of_node = of_node_get(np);
> +       device_set_node(&port->dev, of_fwnode_handle(of_node_get(np)));
>         port->dev.parent = padctl->dev;
>
>         err = dev_set_name(&port->dev, "%s-%u", name, index);
> --
> 2.43.0
>