From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
To: Li Ming <ming.li@zohomail.com>
Cc: <dave@stgolabs.net>, <dave.jiang@intel.com>,
<alison.schofield@intel.com>, <vishal.l.verma@intel.com>,
<ira.weiny@intel.com>, <dan.j.williams@intel.com>,
<linux-cxl@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v1 7/7] cxl/region: Drop goto pattern of construct_region()
Date: Tue, 11 Feb 2025 17:36:06 +0000 [thread overview]
Message-ID: <20250211173606.00004d33@huawei.com> (raw)
In-Reply-To: <20250211075727.351895-8-ming.li@zohomail.com>
On Tue, 11 Feb 2025 15:57:27 +0800
Li Ming <ming.li@zohomail.com> wrote:
> Some operations need to be procted by the cxl_region_rwsem in construct
> region(). Currently, construct_region() uses down_write() and up_write()
> for the cxl_region_rwsem, so there is a goto pattern after down_write()
> invoked to release cxl_region_rwsem.
>
> construct region() can be optimized to remove the goto pattern. The
> changes are creating a new function called __construct_region() which
> will include all checking and operations protected by the
> cxl_region_rwsem, and using guard(rwsem_write) to replace down_write()
> and up_write() in __construct_region().
>
> Signed-off-by: Li Ming <ming.li@zohomail.com>
> ---
> drivers/cxl/core/region.c | 71 +++++++++++++++++++++------------------
> 1 file changed, 39 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c
> index 36f3771818d3..170278bdcedc 100644
> --- a/drivers/cxl/core/region.c
> +++ b/drivers/cxl/core/region.c
> @@ -3217,49 +3217,31 @@ static int match_region_by_range(struct device *dev, const void *data)
> return rc;
> }
>
> -/* Establish an empty region covering the given HPA range */
> -static struct cxl_region *construct_region(struct cxl_root_decoder *cxlrd,
> - struct cxl_endpoint_decoder *cxled)
> +static int __construct_region(struct cxl_region *cxlr,
This is only factoring out part, so I'm not sure the naming makes sense.
I don't have a better name however as this is doing various different things...
setup_region() doesn't feel right either...
> + struct cxl_root_decoder *cxlrd,
> + struct cxl_endpoint_decoder *cxled)
> {
> struct cxl_memdev *cxlmd = cxled_to_memdev(cxled);
> - struct cxl_port *port = cxlrd_to_port(cxlrd);
> struct range *hpa = &cxled->cxld.hpa_range;
> struct cxl_region_params *p;
> - struct cxl_region *cxlr;
> struct resource *res;
> int rc;
>
> - do {
> - cxlr = __create_region(cxlrd, cxled->mode,
> - atomic_read(&cxlrd->region_id));
> - } while (IS_ERR(cxlr) && PTR_ERR(cxlr) == -EBUSY);
> -
> - if (IS_ERR(cxlr)) {
> - dev_err(cxlmd->dev.parent,
> - "%s:%s: %s failed assign region: %ld\n",
> - dev_name(&cxlmd->dev), dev_name(&cxled->cxld.dev),
> - __func__, PTR_ERR(cxlr));
> - return cxlr;
> - }
> -
> - down_write(&cxl_region_rwsem);
> + guard(rwsem_write)(&cxl_region_rwsem);
> p = &cxlr->params;
> if (p->state >= CXL_CONFIG_INTERLEAVE_ACTIVE) {
> dev_err(cxlmd->dev.parent,
> "%s:%s: %s autodiscovery interrupted\n",
> dev_name(&cxlmd->dev), dev_name(&cxled->cxld.dev),
> __func__);
> - rc = -EBUSY;
> - goto err;
> + return -EBUSY;
> }
>
> set_bit(CXL_REGION_F_AUTO, &cxlr->flags);
>
> res = kmalloc(sizeof(*res), GFP_KERNEL);
> - if (!res) {
> - rc = -ENOMEM;
> - goto err;
> - }
> + if (!res)
> + return -ENOMEM;
>
> *res = DEFINE_RES_MEM_NAMED(hpa->start, range_len(hpa),
> dev_name(&cxlr->dev));
> @@ -3282,7 +3264,7 @@ static struct cxl_region *construct_region(struct cxl_root_decoder *cxlrd,
>
> rc = sysfs_update_group(&cxlr->dev.kobj, get_cxl_region_target_group());
> if (rc)
> - goto err;
> + return rc;
>
> dev_dbg(cxlmd->dev.parent, "%s:%s: %s %s res: %pr iw: %d ig: %d\n",
> dev_name(&cxlmd->dev), dev_name(&cxled->cxld.dev), __func__,
> @@ -3291,14 +3273,39 @@ static struct cxl_region *construct_region(struct cxl_root_decoder *cxlrd,
>
> /* ...to match put_device() in cxl_add_to_region() */
> get_device(&cxlr->dev);
> - up_write(&cxl_region_rwsem);
>
> - return cxlr;
> + return 0;
> +}
>
> -err:
> - up_write(&cxl_region_rwsem);
> - devm_release_action(port->uport_dev, unregister_region, cxlr);
> - return ERR_PTR(rc);
> +/* Establish an empty region covering the given HPA range */
> +static struct cxl_region *construct_region(struct cxl_root_decoder *cxlrd,
> + struct cxl_endpoint_decoder *cxled)
> +{
> + struct cxl_memdev *cxlmd = cxled_to_memdev(cxled);
> + struct cxl_port *port = cxlrd_to_port(cxlrd);
> + struct cxl_region *cxlr;
> + int rc;
> +
> + do {
> + cxlr = __create_region(cxlrd, cxled->mode,
> + atomic_read(&cxlrd->region_id));
> + } while (IS_ERR(cxlr) && PTR_ERR(cxlr) == -EBUSY);
> +
> + if (IS_ERR(cxlr)) {
> + dev_err(cxlmd->dev.parent,
> + "%s:%s: %s failed assign region: %ld\n",
> + dev_name(&cxlmd->dev), dev_name(&cxled->cxld.dev),
> + __func__, PTR_ERR(cxlr));
> + return cxlr;
> + }
> +
> + rc = __construct_region(cxlr, cxlrd, cxled);
> + if (rc) {
> + devm_release_action(port->uport_dev, unregister_region, cxlr);
> + return ERR_PTR(rc);
> + }
> +
> + return cxlr;
> }
>
> int cxl_add_to_region(struct cxl_port *root, struct cxl_endpoint_decoder *cxled)
next prev parent reply other threads:[~2025-02-11 17:36 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-11 7:57 [PATCH v1 0/7] Use guard() instead of rwsem locking Li Ming
2025-02-11 7:57 ` [PATCH v1 1/7] cxl/core: Use guard() to replace open-coded down_read/write() Li Ming
2025-02-11 17:26 ` Jonathan Cameron
2025-02-12 6:36 ` Li Ming
2025-02-11 7:57 ` [PATCH v1 2/7] cxl/core: cxl_mem_sanitize() cleanup Li Ming
2025-02-11 17:27 ` Jonathan Cameron
2025-02-11 7:57 ` [PATCH v1 3/7] cxl/memdev: cxl_memdev_ioctl() cleanup Li Ming
2025-02-11 17:28 ` Jonathan Cameron
2025-02-11 7:57 ` [PATCH v1 4/7] cxl/core: Use guard() to drop the goto pattern of cxl_dpa_free() Li Ming
2025-02-11 17:30 ` Jonathan Cameron
2025-02-11 7:57 ` [PATCH v1 5/7] cxl/core: Use guard() to drop goto pattern of cxl_dpa_alloc() Li Ming
2025-02-11 17:32 ` Jonathan Cameron
2025-02-11 7:57 ` [PATCH v1 6/7] cxl/region: Drop goto pattern in cxl_dax_region_alloc() Li Ming
2025-02-11 17:32 ` Jonathan Cameron
2025-02-11 7:57 ` [PATCH v1 7/7] cxl/region: Drop goto pattern of construct_region() Li Ming
2025-02-11 17:36 ` Jonathan Cameron [this message]
2025-02-11 21:24 ` Dave Jiang
2025-02-13 4:15 ` Li Ming
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250211173606.00004d33@huawei.com \
--to=jonathan.cameron@huawei.com \
--cc=alison.schofield@intel.com \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=dave@stgolabs.net \
--cc=ira.weiny@intel.com \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ming.li@zohomail.com \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox